diff options
author | oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-09-30 05:37:32 +0000 |
---|---|---|
committer | oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-09-30 05:37:32 +0000 |
commit | 642519649e9f8171f2c06260eb0280c8a060d4df (patch) | |
tree | e717ddf7f9cf7c5804cbe4674e47743c2023d17e /tcl | |
parent | e4de4251fe6e1fdefb4b10f4178bb7973248e0d2 (diff) | |
download | openocd_libswd-642519649e9f8171f2c06260eb0280c8a060d4df.tar.gz openocd_libswd-642519649e9f8171f2c06260eb0280c8a060d4df.tar.bz2 openocd_libswd-642519649e9f8171f2c06260eb0280c8a060d4df.tar.xz openocd_libswd-642519649e9f8171f2c06260eb0280c8a060d4df.zip |
michal smulski <michal.smulski@ooma.com> reset now works
git-svn-id: svn://svn.berlios.de/openocd/trunk@2778 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Diffstat (limited to 'tcl')
-rw-r--r-- | tcl/board/telo.cfg | 40 | ||||
-rw-r--r-- | tcl/target/c100config.tcl | 180 | ||||
-rw-r--r-- | tcl/target/telo.cfg | 59 |
3 files changed, 212 insertions, 67 deletions
diff --git a/tcl/board/telo.cfg b/tcl/board/telo.cfg index a0643f74..29066f96 100644 --- a/tcl/board/telo.cfg +++ b/tcl/board/telo.cfg @@ -1,33 +1,34 @@ -source [find target/c100.cfg] +source [find c100.cfg] # basic register defintion for C100 -source [find target/c100regs.tcl] +source [find c100regs.tcl] # board-config info -source [find target/c100config.tcl] +source [find c100config.tcl] # C100 helper functions -source [find target/c100helper.tcl] +source [find c100helper.tcl] # Telo board & C100 support trst and srst -# however openocd does not support -# 1. setting srst reset pulse width -# 2. setting delay between srst pulse and JTAG access -# This really makes the srst useless for now. +# Note that libftd2xx.so tries to assert srst +# which break this script +# use libftdi.so library instead with this script +# make the reset asserted to +# allow RC circuit to discharge for: [ms] +jtag_nsrst_assert_width 100 +jtag_ntrst_assert_width 100 +# don't talk to JTAG after reset for: [ms] +jtag_nsrst_delay 100 +jtag_ntrst_delay 100 reset_config trst_and_srst separate + # issue telnet: reset init # issue gdb: monitor reset init $_TARGETNAME configure -event reset-init { jtag_khz 100 - # setup GPIO used as control signals for C100 - setupGPIO - # This will allow acces to lower 8MB or NOR - lowGPIO5 - # setup NOR size,timing,etc. - setupNOR - # setup internals + PLL + DDR2 - initC100 + # this will setup Telo board + setupTelo #turn up the JTAG speed jtag_khz 3000 puts "JTAG speek now 3MHz" @@ -38,10 +39,15 @@ $_TARGETNAME configure -event reset-deassert-post { # Force target into ARM state. # soft_reset_halt # not implemented on ARM11 puts "Detected SRSRT asserted on C100.CPU" + +} +$_TARGETNAME configure -event reset-assert-post { + puts "Assering reset" + #sleep 10 } -proc power_restore {} { puts "Sensed power restore. No action." } +proc power_restore {} { puts "Sensed power restore. No action." } proc srst_deasserted {} { puts "Sensed nSRST deasserted. No action." } diff --git a/tcl/target/c100config.tcl b/tcl/target/c100config.tcl index b25dfd79..752865e3 100644 --- a/tcl/target/c100config.tcl +++ b/tcl/target/c100config.tcl @@ -3,7 +3,7 @@ # set CFG_REFCLKFREQ [configC100 CFG_REFCLKFREQ] proc config {label} { - return [dict get [configC100] $label ] + return [dict get [configC100] $label ] } # show the value for the param. with label @@ -15,7 +15,7 @@ proc showconfig {label} { # when there are more then one board config # use soft links to c100board-config.tcl # so that only the right board-config gets -# included (just like include/configs/board-configs.h +# included (just like include/configs/board-configs.h # in u-boot. proc configC100 {} { # xtal freq. 24MHz @@ -28,7 +28,7 @@ proc configC100 {} { # y = amba_clk * (w+1)*(x+1)*2/xtal_clk dict set configC100 y_amba [expr ([dict get $configC100 CONFIG_SYS_HZ_CLOCK] * ( ([dict get $configC100 w_amba]+1 ) * ([dict get $configC100 x_amba]+1 ) *2 ) / [dict get $configC100 CFG_REFCLKFREQ]) ] - # Arm Clk 450MHz, must be a multiple of 25 MHz + # Arm Clk 450MHz, must be a multiple of 25 MHz dict set configC100 CFG_ARM_CLOCK 450000000 dict set configC100 w_arm 0 dict set configC100 x_arm 1 @@ -38,20 +38,34 @@ proc configC100 {} { } +# This should be called for reset init event handler +proc setupTelo {} { + + # setup GPIO used as control signals for C100 + setupGPIO + # This will allow acces to lower 8MB or NOR + lowGPIO5 + # setup NOR size,timing,etc. + setupNOR + # setup internals + PLL + DDR2 + initC100 +} + + proc setupNOR {} { puts "Setting up NOR: 16MB, 16-bit wide bus, CS0" # this is taken from u-boot/boards/mindspeed/ooma-darwin/board.c:nor_hw_init() - set EX_CSEN_REG [regs EX_CSEN_REG ] - set EX_CS0_SEG_REG [regs EX_CS0_SEG_REG ] - set EX_CS0_CFG_REG [regs EX_CS0_CFG_REG ] - set EX_CS0_TMG1_REG [regs EX_CS0_TMG1_REG ] - set EX_CS0_TMG2_REG [regs EX_CS0_TMG2_REG ] - set EX_CS0_TMG3_REG [regs EX_CS0_TMG3_REG ] + set EX_CSEN_REG [regs EX_CSEN_REG ] + set EX_CS0_SEG_REG [regs EX_CS0_SEG_REG ] + set EX_CS0_CFG_REG [regs EX_CS0_CFG_REG ] + set EX_CS0_TMG1_REG [regs EX_CS0_TMG1_REG ] + set EX_CS0_TMG2_REG [regs EX_CS0_TMG2_REG ] + set EX_CS0_TMG3_REG [regs EX_CS0_TMG3_REG ] set EX_CLOCK_DIV_REG [regs EX_CLOCK_DIV_REG ] - set EX_MFSM_REG [regs EX_MFSM_REG ] - set EX_CSFSM_REG [regs EX_CSFSM_REG ] - set EX_WRFSM_REG [regs EX_WRFSM_REG ] - set EX_RDFSM_REG [regs EX_RDFSM_REG ] + set EX_MFSM_REG [regs EX_MFSM_REG ] + set EX_CSFSM_REG [regs EX_CSFSM_REG ] + set EX_WRFSM_REG [regs EX_WRFSM_REG ] + set EX_RDFSM_REG [regs EX_RDFSM_REG ] # enable Expansion Bus Clock + CS0 (NOR) mww $EX_CSEN_REG 0x3 @@ -62,7 +76,7 @@ proc setupNOR {} { # set timings to NOR mww $EX_CS0_TMG1_REG 0x03034006 mww $EX_CS0_TMG2_REG 0x04040002 - #mww $EX_CS0_TMG3_REG + #mww $EX_CS0_TMG3_REG # set EBUS clock 165/5=33MHz mww $EX_CLOCK_DIV_REG 0x5 # everthing else is OK with default @@ -72,7 +86,7 @@ proc bootNOR {} { set EXP_CS0_BASEADDR [regs EXP_CS0_BASEADDR] set BLOCK_RESET_REG [regs BLOCK_RESET_REG] set DDR_RST [regs DDR_RST] - + # put DDR controller in reset (so that it comes reset in u-boot) mmw $BLOCK_RESET_REG 0x0 $DDR_RST # setup CS0 controller for NOR @@ -93,8 +107,8 @@ proc setupGPIO {} { #GPIO17 reset for DECT module. #GPIO29 CS_n for NAND - set GPIO_OUTPUT_REG [regs GPIO_OUTPUT_REG] - set GPIO_OE_REG [regs GPIO_OE_REG] + set GPIO_OUTPUT_REG [regs GPIO_OUTPUT_REG] + set GPIO_OE_REG [regs GPIO_OE_REG] # set GPIO29=GPIO17=1, GPIO5=0 mww $GPIO_OUTPUT_REG [expr 1<<29 | 1<<17] @@ -104,14 +118,14 @@ proc setupGPIO {} { proc highGPIO5 {} { puts "GPIO5 high" - set GPIO_OUTPUT_REG [regs GPIO_OUTPUT_REG] + set GPIO_OUTPUT_REG [regs GPIO_OUTPUT_REG] # set GPIO5=1 mmw $GPIO_OUTPUT_REG [expr 1 << 5] 0x0 } proc lowGPIO5 {} { puts "GPIO5 low" - set GPIO_OUTPUT_REG [regs GPIO_OUTPUT_REG] + set GPIO_OUTPUT_REG [regs GPIO_OUTPUT_REG] # set GPIO5=0 mmw $GPIO_OUTPUT_REG 0x0 [expr 1 << 5] } @@ -119,31 +133,32 @@ proc lowGPIO5 {} { proc boardID {id} { # so far built: # 4'b1111 - dict set boardID 15 name "EVT1" + dict set boardID 15 name "EVT1" dict set boardID 15 ddr2size 128M # dict set boardID 15 nandsize 1G # dict set boardID 15 norsize 16M # 4'b0000 - dict set boardID 0 name "EVT2" + dict set boardID 0 name "EVT2" dict set boardID 0 ddr2size 128M # 4'b0001 - dict set boardID 1 name "EVT3" + dict set boardID 1 name "EVT3" dict set boardID 1 ddr2size 256M # 4'b1110 dict set boardID 14 name "EVT3_old" dict set boardID 14 ddr2size 128M # 4'b0010 - dict set boardID 2 name "EVT4" + dict set boardID 2 name "EVT4" dict set boardID 2 ddr2size 256M return $boardID } + # converted from u-boot/boards/mindspeed/ooma-darwin/board.c:ooma_board_detect() -# figure out what board revision this is, uses BOOTSTRAP register to read stuffed resistors +# figure out what board revision this is, uses BOOTSTRAP register to read stuffed resistors proc ooma_board_detect {} { set GPIO_BOOTSTRAP_REG [regs GPIO_BOOTSTRAP_REG] - + # read the current value of the BOOTSRAP pins set tmp [mrw $GPIO_BOOTSTRAP_REG] puts [format "GPIO_BOOTSTRAP_REG (0x%x): 0x%x" $GPIO_BOOTSTRAP_REG $tmp] @@ -152,12 +167,77 @@ proc ooma_board_detect {} { # display board ID puts [format "This is %s (0x%x)" [dict get [boardID $gpbt] $gpbt name] $gpbt] + # show it on serial console + putsUART0 [format "This is %s (0x%x)\n" [dict get [boardID $gpbt] $gpbt name] $gpbt] # return the ddr2 size, used to configure DDR2 on a given board. return [dict get [boardID $gpbt] $gpbt ddr2size] } proc configureDDR2regs_256M {} { - puts "ConfigureDDR2regs_256M TBD" + + set DENALI_CTL_00_DATA [regs DENALI_CTL_00_DATA] + set DENALI_CTL_01_DATA [regs DENALI_CTL_01_DATA] + set DENALI_CTL_02_DATA [regs DENALI_CTL_02_DATA] + set DENALI_CTL_03_DATA [regs DENALI_CTL_03_DATA] + set DENALI_CTL_04_DATA [regs DENALI_CTL_04_DATA] + set DENALI_CTL_05_DATA [regs DENALI_CTL_05_DATA] + set DENALI_CTL_06_DATA [regs DENALI_CTL_06_DATA] + set DENALI_CTL_07_DATA [regs DENALI_CTL_07_DATA] + set DENALI_CTL_08_DATA [regs DENALI_CTL_08_DATA] + set DENALI_CTL_09_DATA [regs DENALI_CTL_09_DATA] + set DENALI_CTL_10_DATA [regs DENALI_CTL_10_DATA] + set DENALI_CTL_11_DATA [regs DENALI_CTL_11_DATA] + set DENALI_CTL_12_DATA [regs DENALI_CTL_12_DATA] + set DENALI_CTL_13_DATA [regs DENALI_CTL_13_DATA] + set DENALI_CTL_14_DATA [regs DENALI_CTL_14_DATA] + set DENALI_CTL_15_DATA [regs DENALI_CTL_15_DATA] + set DENALI_CTL_16_DATA [regs DENALI_CTL_16_DATA] + set DENALI_CTL_17_DATA [regs DENALI_CTL_17_DATA] + set DENALI_CTL_18_DATA [regs DENALI_CTL_18_DATA] + set DENALI_CTL_19_DATA [regs DENALI_CTL_19_DATA] + set DENALI_CTL_20_DATA [regs DENALI_CTL_20_DATA] + + set DENALI_CTL_02_VAL 0x0100000000010100 + set DENALI_CTL_11_VAL 0x433a32164a560a00 + + mw64bit $DENALI_CTL_00_DATA 0x0100000101010101 + # 01_DATA mod [40]=1, enable BA2 + mw64bit $DENALI_CTL_01_DATA 0x0100010100000001 + mw64bit $DENALI_CTL_02_DATA $DENALI_CTL_02_VAL + mw64bit $DENALI_CTL_03_DATA 0x0102020202020201 + mw64bit $DENALI_CTL_04_DATA 0x0000010100000001 + mw64bit $DENALI_CTL_05_DATA 0x0203010300010101 + mw64bit $DENALI_CTL_06_DATA 0x060a020200020202 + mw64bit $DENALI_CTL_07_DATA 0x0000000300000206 + mw64bit $DENALI_CTL_08_DATA 0x6400003f3f0a0209 + mw64bit $DENALI_CTL_09_DATA 0x1a000000001a1a1a + mw64bit $DENALI_CTL_10_DATA 0x0120202020191a18 + # 11_DATA mod [39-32]=16,more refresh + mw64bit $DENALI_CTL_11_DATA $DENALI_CTL_11_VAL + mw64bit $DENALI_CTL_12_DATA 0x0000000000000800 + mw64bit $DENALI_CTL_13_DATA 0x0010002000100040 + mw64bit $DENALI_CTL_14_DATA 0x0010004000100040 + mw64bit $DENALI_CTL_15_DATA 0x04f8000000000000 + mw64bit $DENALI_CTL_16_DATA 0x000000002cca0000 + mw64bit $DENALI_CTL_17_DATA 0x0000000000000000 + mw64bit $DENALI_CTL_18_DATA 0x0302000000000000 + mw64bit $DENALI_CTL_19_DATA 0x00001300c8030600 + mw64bit $DENALI_CTL_20_DATA 0x0000000081fe00c8 + + set wr_dqs_shift 0x40 + # start DDRC + mw64bit $DENALI_CTL_02_DATA [expr $DENALI_CTL_02_VAL | (1 << 32)] + # wait int_status[2] (DRAM init complete) + puts -nonewline "Waiting for DDR2 controller to init..." + set tmp [mrw [expr $DENALI_CTL_08_DATA + 4]] + while { [expr $tmp & 0x040000] == 0 } { + sleep 1 + set tmp [mrw [expr $DENALI_CTL_08_DATA + 4]] + } + puts "done." + + # do ddr2 training sequence + # TBD (for now, if you need it, run trainDDR command) } # converted from u-boot/cpu/arm1136/comcerto/bsp100.c:config_board99() @@ -187,9 +267,9 @@ proc configureDDR2regs_128M {} { set DENALI_CTL_20_DATA [regs DENALI_CTL_20_DATA] - set DENALI_CTL_02_VAL 0x0100010000010100 + set DENALI_CTL_02_VAL 0x0100010000010100 set DENALI_CTL_11_VAL 0x433A42124A650A37 - # set some default values + # set some default values mw64bit $DENALI_CTL_00_DATA 0x0100000101010101 mw64bit $DENALI_CTL_01_DATA 0x0100000100000101 mw64bit $DENALI_CTL_02_DATA $DENALI_CTL_02_VAL @@ -218,11 +298,12 @@ proc configureDDR2regs_128M {} { # wait int_status[2] (DRAM init complete) puts -nonewline "Waiting for DDR2 controller to init..." set tmp [mrw [expr $DENALI_CTL_08_DATA + 4]] - while { [expr $tmp & 0x040000] == 0 } { + while { [expr $tmp & 0x040000] == 0 } { sleep 1 set tmp [mrw [expr $DENALI_CTL_08_DATA + 4]] } - mw64bit $DENALI_CTL_11_DATA [expr ($DENALI_CTL_11_VAL & ~0x00007F0000000000) | ($wr_dqs_shift << 40) ] + # This is not necessary + #mw64bit $DENALI_CTL_11_DATA [expr ($DENALI_CTL_11_VAL & ~0x00007F0000000000) | ($wr_dqs_shift << 40) ] puts "done." # do ddr2 training sequence @@ -237,18 +318,18 @@ proc setupUART0 {} { set GPIO_IOCTRL_REG [regs GPIO_IOCTRL_REG] set GPIO_IOCTRL_VAL [regs GPIO_IOCTRL_VAL] set GPIO_IOCTRL_UART0 [regs GPIO_IOCTRL_UART0] - set UART0_LCR [regs UART0_LCR] - set LCR_DLAB [regs LCR_DLAB] - set UART0_DLL [regs UART0_DLL] - set UART0_DLH [regs UART0_DLH] - set UART0_IIR [regs UART0_IIR] - set UART0_IER [regs UART0_IER] - set LCR_ONE_STOP [regs LCR_ONE_STOP] - set LCR_CHAR_LEN_8 [regs LCR_CHAR_LEN_8] + set UART0_LCR [regs UART0_LCR] + set LCR_DLAB [regs LCR_DLAB] + set UART0_DLL [regs UART0_DLL] + set UART0_DLH [regs UART0_DLH] + set UART0_IIR [regs UART0_IIR] + set UART0_IER [regs UART0_IER] + set LCR_ONE_STOP [regs LCR_ONE_STOP] + set LCR_CHAR_LEN_8 [regs LCR_CHAR_LEN_8] set FCR_XMITRES [regs FCR_XMITRES] - set FCR_RCVRRES [regs FCR_RCVRRES] - set FCR_FIFOEN [regs FCR_FIFOEN] - set IER_UUE [regs IER_UUE] + set FCR_RCVRRES [regs FCR_RCVRRES] + set FCR_FIFOEN [regs FCR_FIFOEN] + set IER_UUE [regs IER_UUE] # unlock writing to IOCTRL register mww $GPIO_LOCK_REG $GPIO_IOCTRL_VAL @@ -274,7 +355,7 @@ proc setupUART0 {} { proc putcUART0 {char} { - set UART0_LSR [regs UART0_LSR] + set UART0_LSR [regs UART0_LSR] set UART0_THR [regs UART0_THR] set LSR_TEMT [regs LSR_TEMT] @@ -308,17 +389,24 @@ proc trainDDR2 {} { resume } -proc flashUBOOT {} { +proc flashUBOOT {file} { # this will update uboot on NOR partition set EXP_CS0_BASEADDR [regs EXP_CS0_BASEADDR] - + # setup CS0 controller for NOR setupNOR # make sure we are accessing the lower part of NOR lowGPIO5 flash probe 0 puts "Erasing sectors 0-3 for uboot" + putsUART0 "Erasing sectors 0-3 for uboot\n" flash erase_sector 0 0 3 - puts "Programming u-boot, takes about 4-5 min for 256kb" - flash write_image ./images/u-boot.bin $EXP_CS0_BASEADDR + puts "Programming u-boot" + putsUART0 "Programming u-boot..." + memwrite burst enable + flash write_image $file $EXP_CS0_BASEADDR + memwrite burst disable + putsUART0 "done.\n" + putsUART0 "Rebooting, please wait!\n" + reboot }
\ No newline at end of file diff --git a/tcl/target/telo.cfg b/tcl/target/telo.cfg index 836b2252..29066f96 100644 --- a/tcl/target/telo.cfg +++ b/tcl/target/telo.cfg @@ -1,9 +1,60 @@ source [find c100.cfg] +# basic register defintion for C100 +source [find c100regs.tcl] +# board-config info +source [find c100config.tcl] +# C100 helper functions +source [find c100helper.tcl] + + +# Telo board & C100 support trst and srst +# Note that libftd2xx.so tries to assert srst +# which break this script +# use libftdi.so library instead with this script +# make the reset asserted to +# allow RC circuit to discharge for: [ms] +jtag_nsrst_assert_width 100 +jtag_ntrst_assert_width 100 +# don't talk to JTAG after reset for: [ms] +jtag_nsrst_delay 100 +jtag_ntrst_delay 100 +reset_config trst_and_srst separate + + + + +# issue telnet: reset init +# issue gdb: monitor reset init +$_TARGETNAME configure -event reset-init { + jtag_khz 100 + # this will setup Telo board + setupTelo + #turn up the JTAG speed + jtag_khz 3000 + puts "JTAG speek now 3MHz" + puts "type helpC100 to get help on C100" +} + +$_TARGETNAME configure -event reset-deassert-post { + # Force target into ARM state. +# soft_reset_halt # not implemented on ARM11 + puts "Detected SRSRT asserted on C100.CPU" + +} + +$_TARGETNAME configure -event reset-assert-post { + puts "Assering reset" + #sleep 10 +} + +proc power_restore {} { puts "Sensed power restore. No action." } +proc srst_deasserted {} { puts "Sensed nSRST deasserted. No action." } + # boots from NOR on CS0: 8 MBytes CFI flash, 16-bit bus -# it's really 16MB but the upper 8mb is controller via gpio? +# it's really 16MB but the upper 8mb is controller via gpio +# openocd does not support 'complex reads/writes' to NOR flash bank cfi 0x20000000 0x01000000 2 2 $_TARGETNAME -# -gdb_memory_map enable - +# writing data to memory does not work without this +memwrite burst disable
\ No newline at end of file |