diff options
| author | David Brownell <dbrownell@users.sourceforge.net> | 2009-11-10 09:25:26 -0800 |
|---|---|---|
| committer | David Brownell <dbrownell@users.sourceforge.net> | 2009-11-10 09:25:26 -0800 |
| commit | 6881c1b6d686c91a8cd604bdcd6098ab62d4dcb9 (patch) | |
| tree | bac1ae421726a589ae26d22a10ce26f75719a74a /tcl | |
| parent | 85944d4144a1df0647e4324d1cf8ae9a276b70e5 (diff) | |
| download | openocd_libswd-6881c1b6d686c91a8cd604bdcd6098ab62d4dcb9.tar.gz openocd_libswd-6881c1b6d686c91a8cd604bdcd6098ab62d4dcb9.tar.bz2 openocd_libswd-6881c1b6d686c91a8cd604bdcd6098ab62d4dcb9.tar.xz openocd_libswd-6881c1b6d686c91a8cd604bdcd6098ab62d4dcb9.zip | |
target.cfg: (re)move some bogus reset_config lines
General rule, this is all board-specific and doesn't belong
in target config files. Some of these were just cosmetic.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Diffstat (limited to 'tcl')
| -rw-r--r-- | tcl/board/atmel_sam3u_ek.cfg | 3 | ||||
| -rw-r--r-- | tcl/target/aduc702x.cfg | 9 | ||||
| -rw-r--r-- | tcl/target/at91sam3uXX.cfg | 2 | ||||
| -rw-r--r-- | tcl/target/str730.cfg | 1 | ||||
| -rw-r--r-- | tcl/target/str750.cfg | 1 |
5 files changed, 3 insertions, 13 deletions
diff --git a/tcl/board/atmel_sam3u_ek.cfg b/tcl/board/atmel_sam3u_ek.cfg index f7501d00..13d930b1 100644 --- a/tcl/board/atmel_sam3u_ek.cfg +++ b/tcl/board/atmel_sam3u_ek.cfg @@ -1 +1,4 @@ source [find target/at91sam3u4e.cfg] + +reset_config srst_only + diff --git a/tcl/target/aduc702x.cfg b/tcl/target/aduc702x.cfg index f7c5ee43..b60c9679 100644 --- a/tcl/target/aduc702x.cfg +++ b/tcl/target/aduc702x.cfg @@ -1,7 +1,3 @@ -## -*- tcl -*- -## - - if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME } else { @@ -21,14 +17,9 @@ if { [info exists CPUTAPID] } { set _CPUTAPID 0x3f0f0f0f } - jtag_nsrst_delay 200 jtag_ntrst_delay 200 -# This is for the case that TRST/SRST is not wired on your JTAG adaptor. -# Don't really need them anyways. -reset_config none - ## JTAG scan chain #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID diff --git a/tcl/target/at91sam3uXX.cfg b/tcl/target/at91sam3uXX.cfg index 985e052a..b948c64a 100644 --- a/tcl/target/at91sam3uXX.cfg +++ b/tcl/target/at91sam3uXX.cfg @@ -35,8 +35,6 @@ target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNA # 16K is plenty, the smallest chip has this much $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0 -reset_config srst_only - $_TARGETNAME configure -event gdb-flash-erase-start { halt } diff --git a/tcl/target/str730.cfg b/tcl/target/str730.cfg index fe70802b..c98d56c8 100644 --- a/tcl/target/str730.cfg +++ b/tcl/target/str730.cfg @@ -21,7 +21,6 @@ if { [info exists CPUTAPID] } { } #use combined on interfaces or targets that can't set TRST/SRST separately -#reset_config trst_and_srst srst_pulls_trst reset_config trst_and_srst srst_pulls_trst #jtag scan chain diff --git a/tcl/target/str750.cfg b/tcl/target/str750.cfg index 22d87f87..5439c335 100644 --- a/tcl/target/str750.cfg +++ b/tcl/target/str750.cfg @@ -22,7 +22,6 @@ if { [info exists CPUTAPID] } { jtag_khz 10 #use combined on interfaces or targets that can't set TRST/SRST separately -#reset_config trst_and_srst srst_pulls_trst reset_config trst_and_srst srst_pulls_trst #jtag scan chain |