diff options
author | zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-07-02 04:55:35 +0000 |
---|---|---|
committer | zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-07-02 04:55:35 +0000 |
commit | 6d08c1800c7d313c3e6be9fe2c7124df02749665 (patch) | |
tree | 1b6ec574d2329d376eab61a4674a194e206815ca /tcl | |
parent | b3e6cb6d564f722f95a341f9b6661fc3ed44f969 (diff) | |
download | openocd_libswd-6d08c1800c7d313c3e6be9fe2c7124df02749665.tar.gz openocd_libswd-6d08c1800c7d313c3e6be9fe2c7124df02749665.tar.bz2 openocd_libswd-6d08c1800c7d313c3e6be9fe2c7124df02749665.tar.xz openocd_libswd-6d08c1800c7d313c3e6be9fe2c7124df02749665.zip |
David Brownell <david-b@pacbell.net>:
Prepare the DaVinci PLL code to support the version 0x0E module
used in newer chips (e.g. dm365): rename the original code so
it's specific to version 0x02 PLL modules, and update the dm355evm
code to use that new name.
Fix two minor bugs in that version 2 code: sysclk3 setup used
the sysclk2 divider address (affecting video processing on dm355,
no worry for now) and sysclk2 setup had a syntax error.
Also minor fixups to dm355evm, mostly to permit use of RTCK.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2447 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Diffstat (limited to 'tcl')
-rw-r--r-- | tcl/board/dm355evm.cfg | 9 | ||||
-rw-r--r-- | tcl/target/davinci.cfg | 14 |
2 files changed, 10 insertions, 13 deletions
diff --git a/tcl/board/dm355evm.cfg b/tcl/board/dm355evm.cfg index 9e6dc73b..9b32ef9e 100644 --- a/tcl/board/dm355evm.cfg +++ b/tcl/board/dm355evm.cfg @@ -1,4 +1,3 @@ -# # DM355 EVM board # http://focus.ti.com/docs/toolsw/folders/print/tmdsevm355.html # http://c6000.spectrumdigital.com/evmdm355/ @@ -22,7 +21,7 @@ proc dm355evm_init {} { puts "Initialize DM355 EVM board" # CLKIN = 24 MHz ... can't talk quickly to ARM yet - jtag_khz 1500 + jtag_rclk 1500 ######################## # PLL1 = 432 MHz (/8, x144) @@ -37,10 +36,10 @@ proc dm355evm_init {} { set pll_divs [dict create] dict set pll_divs div3 16 dict set pll_divs div4 8 - pll_setup $addr 144 $pll_divs + pll_v02_setup $addr 144 $pll_divs # ARM is now running at 216 MHz, so JTAG can go faster - jtag_khz 20000 + jtag_rclk 20000 ######################## # PLL2 = 342 MHz (/8, x114) @@ -50,7 +49,7 @@ proc dm355evm_init {} { set addr [dict get $dm355 pllc2] set pll_divs [dict create] dict set pll_divs prediv 8 - pll_setup $addr 114 $pll_divs + pll_v02_setup $addr 114 $pll_divs ######################## # PINMUX diff --git a/tcl/target/davinci.cfg b/tcl/target/davinci.cfg index 0a3da27d..07a26b21 100644 --- a/tcl/target/davinci.cfg +++ b/tcl/target/davinci.cfg @@ -31,12 +31,10 @@ proc mmw {reg setbits clearbits} { # For PLLs that don't have a given register (e.g. plldiv8), or where a # given divider is non-programmable, caller provides *NO* config mapping. # -# REVISIT there are minor differences between the PLL controllers. -# Handle those; maybe check the ID register. This version behaves -# for at least the dm355. On dm6446 and dm357 the PLLRST polarity -# is different. On dm365 there are more changes. -# -proc pll_setup {pll_addr mult config} { + +# PLL version 0x02: tested on dm355 +# REVISIT: On dm6446 and dm357 the PLLRST polarity is different. +proc pll_v02_setup {pll_addr mult config} { set pll_ctrl_addr [expr $pll_addr + 0x100] set pll_ctrl [mrw $pll_ctrl_addr] @@ -98,7 +96,7 @@ proc pll_setup {pll_addr mult config} { set go 1 } if { [dict exists $config div2] } { - 1et div [dict get $config div2] + set div [dict get $config div2] set div [expr 0x8000 | ($div - 1)] mww [expr $pll_addr + 0x011c] $div set go 1 @@ -106,7 +104,7 @@ proc pll_setup {pll_addr mult config} { if { [dict exists $config div3] } { set div [dict get $config div3] set div [expr 0x8000 | ($div - 1)] - mww [expr $pll_addr + 0x011c] $div + mww [expr $pll_addr + 0x0120] $div set go 1 } if { [dict exists $config div4] } { |