summaryrefslogtreecommitdiff
path: root/tcl
diff options
context:
space:
mode:
authorDavid Brownell <dbrownell@users.sourceforge.net>2009-12-14 16:29:53 -0800
committerDavid Brownell <dbrownell@users.sourceforge.net>2009-12-14 16:29:53 -0800
commitc86a64dff7e9ebe8ab87e353f5b4156f830a0de7 (patch)
tree2364eeba7cd05c0f4dd3b617ed2bcfc872267cbf /tcl
parenta1009509fb0fc187243435a0f38ef327e2aac147 (diff)
downloadopenocd_libswd-c86a64dff7e9ebe8ab87e353f5b4156f830a0de7.tar.gz
openocd_libswd-c86a64dff7e9ebe8ab87e353f5b4156f830a0de7.tar.bz2
openocd_libswd-c86a64dff7e9ebe8ab87e353f5b4156f830a0de7.tar.xz
openocd_libswd-c86a64dff7e9ebe8ab87e353f5b4156f830a0de7.zip
lm3748: use new Stellaris config file
Use the new file, and remove the old target/lm3s3748.cfg one. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Diffstat (limited to 'tcl')
-rw-r--r--tcl/board/ek-lm3s3748.cfg5
-rw-r--r--tcl/target/lm3s3748.cfg29
2 files changed, 1 insertions, 33 deletions
diff --git a/tcl/board/ek-lm3s3748.cfg b/tcl/board/ek-lm3s3748.cfg
index 1d56c7f4..950e5119 100644
--- a/tcl/board/ek-lm3s3748.cfg
+++ b/tcl/board/ek-lm3s3748.cfg
@@ -4,10 +4,7 @@
# NOTE: to use the on-board FT2232 JTAG interface:
# source [find interface/luminary.cfg]
-source [find target/lm3s3748.cfg]
-
-# LM3S parts don't support RTCK
-jtag_khz 500
+source [find target/stellaris.cfg]
# Board has only srst
reset_config srst_only
diff --git a/tcl/target/lm3s3748.cfg b/tcl/target/lm3s3748.cfg
deleted file mode 100644
index 274377a7..00000000
--- a/tcl/target/lm3s3748.cfg
+++ /dev/null
@@ -1,29 +0,0 @@
-# TI/Luminary Stellaris lm3s3748
-
-if { [info exists CHIPNAME] } {
- set _CHIPNAME $CHIPNAME
-} else {
- set _CHIPNAME lm3s3748
-}
-
-if { [info exists CPUTAPID ] } {
- set _CPUTAPID $CPUTAPID
-} else {
- set _CPUTAPID 0x3ba00477
-}
-
-# JTAG scan chain
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 1 -irmask 0xf -expected-id $_CPUTAPID
-
-# The "lm3s" variant works around an erratum when using Rev A of "DustDevil"
-# parts (third generation, includes LM3S3748). It keeps the debug registers
-# from being cleared, by using software reset not SRST; NOP on newer revs.
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m3 -chain-position $_CHIPNAME.cpu -variant lm3s
-
-# 8k working area at base of ram, not backed up
-$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 0x2000
-
-# flash configuration -- one bank of 128K
-set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME stellaris 0 0 0 0 $_TARGETNAME