summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--tcl/board/at91rm9200-dk.cfg5
-rw-r--r--tcl/board/balloon3-cpu.cfg4
-rw-r--r--tcl/board/digi_connectcore_wi-9c.cfg4
-rw-r--r--tcl/board/dm6446evm.cfg3
-rw-r--r--tcl/board/hammer.cfg4
-rw-r--r--tcl/board/imx27ads.cfg3
-rw-r--r--tcl/board/logicpd_imx27.cfg3
-rw-r--r--tcl/board/topas910.cfg4
-rw-r--r--tcl/board/topasa900.cfg4
-rw-r--r--tcl/board/unknown_at91sam9260.cfg4
-rw-r--r--tcl/board/x300t.cfg4
-rw-r--r--tcl/target/at91sam9260_ext_RAM_ext_flash.cfg2
12 files changed, 24 insertions, 20 deletions
diff --git a/tcl/board/at91rm9200-dk.cfg b/tcl/board/at91rm9200-dk.cfg
index 476f5a80..af6e3df2 100644
--- a/tcl/board/at91rm9200-dk.cfg
+++ b/tcl/board/at91rm9200-dk.cfg
@@ -8,8 +8,9 @@ source [find target/at91rm9200.cfg]
$_TARGETNAME configure -event gdb-attach { reset init }
$_TARGETNAME configure -event reset-init { at91rm9200_dk_init }
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash_bank cfi 0x10000000 0x00200000 2 2 0
+#flash bank <name> <driver> <base> <size> <chip_width> <bus_width> <target>
+set _FLASHNAME $_CHIPNAME.flash
+flash_bank $_FLASHNAME cfi 0x10000000 0x00200000 2 2 $_TARGETNAME
proc at91rm9200_dk_init { } {
diff --git a/tcl/board/balloon3-cpu.cfg b/tcl/board/balloon3-cpu.cfg
index ecb1a282..468b867b 100644
--- a/tcl/board/balloon3-cpu.cfg
+++ b/tcl/board/balloon3-cpu.cfg
@@ -8,7 +8,7 @@ source [find target/pxa270.cfg]
# Override this in the interface config for parallel dongles
reset_config trst_and_srst separate
-# flash bank <driver> <base> <size> <chip_width> <bus_width>
+# flash bank <name> <driver> <base> <size> <chip_width> <bus_width> <target>
# 29LV650 64Mbit Flash
set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME cfi 0x00000000 0x800000 2 2 0
+flash bank $_FLASHNAME cfi 0x00000000 0x800000 2 2 $_TARGETNAME
diff --git a/tcl/board/digi_connectcore_wi-9c.cfg b/tcl/board/digi_connectcore_wi-9c.cfg
index ad40d537..096af1b6 100644
--- a/tcl/board/digi_connectcore_wi-9c.cfg
+++ b/tcl/board/digi_connectcore_wi-9c.cfg
@@ -125,6 +125,6 @@ $_TARGETNAME configure -work-area-phys 0x00000000 -work-area-size 0x1000 -work-a
#####################
#M29DW323DB - not working
-#flash bank cfi <base> <size> <chip width> <bus width> <target#>
+#flash bank <name> cfi <base> <size> <chip width> <bus width> <target>
set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME cfi 0x50000000 0x0400000 2 2 0
+flash bank $_FLASHNAME cfi 0x50000000 0x0400000 2 2 $_TARGETNAME
diff --git a/tcl/board/dm6446evm.cfg b/tcl/board/dm6446evm.cfg
index 39607fe3..dcd1c4ef 100644
--- a/tcl/board/dm6446evm.cfg
+++ b/tcl/board/dm6446evm.cfg
@@ -31,7 +31,8 @@ if { [info exists J4_OPTION] } {
if { $CS2_MODE == "NOR" } {
# 16 Mbytes address space; 16 bit bus width
# (older boards used 32MB parts, with upper 16 MB unusable)
- flash bank cfi 0x02000000 0x01000000 2 2 $_TARGETNAME
+ set _FLASHNAME $_CHIPNAME.flash
+ flash bank $_FLASHNAME cfi 0x02000000 0x01000000 2 2 $_TARGETNAME
proc flashprobe {} { flash probe 0 }
} elseif { $CS2_MODE == "NAND" } {
# 64 Mbyte small page; 8 bit bus width
diff --git a/tcl/board/hammer.cfg b/tcl/board/hammer.cfg
index d366a45e..ea3da812 100644
--- a/tcl/board/hammer.cfg
+++ b/tcl/board/hammer.cfg
@@ -32,6 +32,6 @@ $_TARGETNAME configure -event reset-init {
#flash configuration
-#flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...]
+#flash bank <name> <driver> <base> <size> <chip_width> <bus_width> <target> [driver_options ...]
set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME cfi 0x00000000 0x1000000 2 2 0
+flash bank $_FLASHNAME cfi 0x00000000 0x1000000 2 2 $_TARGETNAME
diff --git a/tcl/board/imx27ads.cfg b/tcl/board/imx27ads.cfg
index 664b4705..927647a9 100644
--- a/tcl/board/imx27ads.cfg
+++ b/tcl/board/imx27ads.cfg
@@ -5,7 +5,8 @@ $_TARGETNAME configure -event gdb-attach { reset init }
$_TARGETNAME configure -event reset-init { imx27ads_init }
# The IMX27 ADS board has a NOR flash on CS0
-flash_bank cfi 0xc0000000 0x00200000 2 2 0
+set _FLASHNAME $_CHIPNAME.flash
+flash_bank $_FLASHNAME cfi 0xc0000000 0x00200000 2 2 $_TARGETNAME
proc imx27ads_init { } {
# This setup puts RAM at 0xA0000000
diff --git a/tcl/board/logicpd_imx27.cfg b/tcl/board/logicpd_imx27.cfg
index b068f1a1..02afc774 100644
--- a/tcl/board/logicpd_imx27.cfg
+++ b/tcl/board/logicpd_imx27.cfg
@@ -2,7 +2,8 @@
source [find target/imx27.cfg]
# The Logic PD board has a NOR flash on CS0
-flash_bank cfi 0xc0000000 0x00200000 2 2 0
+set _FLASHNAME $_CHIPNAME.flash
+flash_bank $_FLASHNAME cfi 0xc0000000 0x00200000 2 2 $_TARGETNAME
#
# FIX ME, Add support to
diff --git a/tcl/board/topas910.cfg b/tcl/board/topas910.cfg
index 303fc778..333b016b 100644
--- a/tcl/board/topas910.cfg
+++ b/tcl/board/topas910.cfg
@@ -114,6 +114,6 @@ arm7_9 dcc_downloads enable # Enable faster DCC downloads
# Flash configuration
#####################
-#flash bank cfi <base> <size> <chip width> <bus width> <target#>
+#flash bank <name> cfi <base> <size> <chip width> <bus width> <target>
set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME cfi 0x20000000 0x2000000 2 2 0
+flash bank $_FLASHNAME cfi 0x20000000 0x2000000 2 2 $_TARGETNAME
diff --git a/tcl/board/topasa900.cfg b/tcl/board/topasa900.cfg
index aa3f77f2..065cd317 100644
--- a/tcl/board/topasa900.cfg
+++ b/tcl/board/topasa900.cfg
@@ -120,7 +120,7 @@ arm7_9 dcc_downloads enable # Enable faster DCC downloads
# Flash configuration
#####################
-#flash bank cfi <base> <size> <chip width> <bus width> <target#>
+#flash bank <name> cfi <base> <size> <chip width> <bus width> <target>
set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME cfi 0x20000000 0x1000000 2 2 0
+flash bank $_FLASHNAME cfi 0x20000000 0x1000000 2 2 $_TARGETNAME
diff --git a/tcl/board/unknown_at91sam9260.cfg b/tcl/board/unknown_at91sam9260.cfg
index ad7b13c7..845de6b9 100644
--- a/tcl/board/unknown_at91sam9260.cfg
+++ b/tcl/board/unknown_at91sam9260.cfg
@@ -90,8 +90,8 @@ $_TARGETNAME configure -event reset-init {
# Flash configuration
#####################
-#flash bank cfi <base> <size> <chip width> <bus width> <target#>
+#flash bank <name> cfi <base> <size> <chip width> <bus width> <target>
set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME cfi 0x10000000 0x01000000 2 2 0
+flash bank $_FLASHNAME cfi 0x10000000 0x01000000 2 2 $_TARGETNAME
diff --git a/tcl/board/x300t.cfg b/tcl/board/x300t.cfg
index d9141809..9d9a320f 100644
--- a/tcl/board/x300t.cfg
+++ b/tcl/board/x300t.cfg
@@ -7,9 +7,9 @@ source [find target/smp8634.cfg]
$_TARGETNAME configure -event reset-init { x300t_init }
# 1MB CFI capable flash
-# flash bank <driver> <base> <size> <chip_width> <bus_width>
+# flash bank <name> <driver> <base> <size> <chip_width> <bus_width> <target>
set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME cfi 0xac000000 0x100000 2 2 0
+flash bank $_FLASHNAME cfi 0xac000000 0x100000 2 2 $_TARGETNAME
proc x300t_init { } {
# Setup SDRAM config and flash mapping
diff --git a/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg b/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg
index 034a3489..d2bf66fe 100644
--- a/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg
+++ b/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg
@@ -54,7 +54,7 @@ $_TARGETNAME configure -event reset-deassert-post {at91sam_init}
# Flash configuration
-#flash bank cfi <base> <size> <chip width> <bus width> <target#>
+#flash bank <name> cfi <base> <size> <chip width> <bus width> <target>
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME cfi 0x10000000 0x01000000 2 2 $_TARGETNAME
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-23 05:48:30 +0000