summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--tcl/board/mcb1700.cfg75
-rw-r--r--tcl/target/lpc1768.cfg16
2 files changed, 79 insertions, 12 deletions
diff --git a/tcl/board/mcb1700.cfg b/tcl/board/mcb1700.cfg
new file mode 100644
index 00000000..845c7e20
--- /dev/null
+++ b/tcl/board/mcb1700.cfg
@@ -0,0 +1,75 @@
+# Keil MCB1700 PCB with 1768
+#
+# Reset init script sets it to 100MHz
+set CCLK 100000
+
+source [find target/lpc1768.cfg]
+
+global MCB1700_CCLK
+set MCB1700_CCLK $CCLK
+
+$_TARGETNAME configure -event reset-start {
+ # Start *real slow* as we do not know the
+ # state the boot rom left the clock in
+ jtag_khz 10
+}
+
+# Set up 100MHz clock to CPU
+$_TARGETNAME configure -event reset-init {
+ # PLL0CON: Disable PLL
+ mww 0x400FC080 0x00000000
+ # PLLFEED
+ mww 0x400FC08C 0x000000AA
+ # PLLFEED
+ mww 0x400FC08C 0x00000055
+
+ # CCLK=PLL/4 (=100 MHz)
+ mww 0x400FC104 0x00000003
+ # CLKSRCSEL: Clock source = internal RC oscillator
+ mww 0x400FC10C 0x00000000
+
+ # PLL0CFG: M=50,N=1 -> PLL=400 MHz
+ mww 0x400FC084 0x00000031
+ # PLLFEED
+ mww 0x400FC08C 0x000000AA
+ # PLLFEED
+ mww 0x400FC08C 0x00000055
+
+ # PLL0CON: Enable PLL
+ mww 0x400FC080 0x00000001
+ # PLLFEED
+ mww 0x400FC08C 0x000000AA
+ # PLLFEED
+ mww 0x400FC08C 0x00000055
+
+ sleep 50
+
+ # PLL0CON: Connect PLL
+ mww 0x400FC080 0x00000003
+ # PLLFEED
+ mww 0x400FC08C 0x000000AA
+ # PLLFEED
+ mww 0x400FC08C 0x00000055
+
+ # Dividing CPU clock by 8 should be pretty conservative
+ #
+ #
+ global MCB1700_CCLK
+ jtag_khz [expr $MCB1700_CCLK / 8]
+
+ # Do not remap 0x0000-0x0020 to anything but the flash (i.e. select
+ # "User Flash Mode" where interrupt vectors are _not_ remapped,
+ # and reside in flash instead).
+ #
+ # See Table 612. Memory Mapping Control register (MEMMAP - 0x400F C040) bit description
+ # Bit Symbol Value Description Reset
+ # value
+ # 0 MAP Memory map control. 0
+ # 0 Boot mode. A portion of the Boot ROM is mapped to address 0.
+ # 1 User mode. The on-chip Flash memory is mapped to address 0.
+ # 31:1 - Reserved. The value read from a reserved bit is not defined. NA
+ #
+ # http://ics.nxp.com/support/documents/microcontrollers/?scope=LPC1768&type=user
+
+ mww 0x400FC040 0x01
+}
diff --git a/tcl/target/lpc1768.cfg b/tcl/target/lpc1768.cfg
index 07c5ab83..4a1ff0bc 100644
--- a/tcl/target/lpc1768.cfg
+++ b/tcl/target/lpc1768.cfg
@@ -47,18 +47,10 @@ set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME lpc2000 0x0 0x80000 0 0 $_TARGETNAME \
lpc1700 $_CCLK calc_checksum
-# Although rclk "appears to work", it turns out that this yields
-# 4MHz whereas the "correct" rate is CCLK/6, which is not what
-# you get with rclk.
-#
-# Also, crank down the frequency further as we're running of an
-# RC oscillator instead of crystal.
-#
-# Setting up XTAL in the reset-init sequence could be worth
-# the effort if you need to program the flash which is pretty
-# big on these devices.
-#
-jtag_khz 100
+# Run with *real slow* clock by default since the
+# boot rom could have been playing with the PLL, so
+# we have no idea what clock the target is running at.
+jtag_khz 10
$_TARGETNAME configure -event reset-init {
# Do not remap 0x0000-0x0020 to anything but the flash (i.e. select