summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--doc/openocd.texi47
-rw-r--r--src/flash/ecos.c4
-rw-r--r--src/flash/flash.c4
-rw-r--r--src/flash/lpc3180_nand_controller.c4
-rw-r--r--src/flash/mflash.c4
-rw-r--r--src/flash/orion_nand.c4
-rw-r--r--src/flash/s3c24xx_nand.c6
-rw-r--r--src/target/etb.c4
-rw-r--r--src/target/etm.c5
-rw-r--r--src/target/etm_dummy.c4
-rw-r--r--src/target/image.c7
-rw-r--r--src/target/target.c55
-rw-r--r--src/target/target.h2
-rw-r--r--src/target/target/ti_dm355.cfg7
-rw-r--r--src/target/xscale.c9
15 files changed, 89 insertions, 77 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi
index 52df9df8..9eabf414 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -881,6 +881,8 @@ If the chip has 2 targets, use the names @b{_TARGETNAME0},
At no time should the name ``target0'' (the default target name if
none was specified) be used. The name ``target0'' is a hard coded name
- the next target on the board will be some other number.
+In the same way, avoid using target numbers even when they are
+permitted; use the right target name(s) for your board.
The user (or board file) should reasonably be able to:
@@ -1702,7 +1704,8 @@ tap which then connects to the TDI pin.
@item @b{Note: Deprecated} - Index Numbers
@* Prior to 28/nov/2008, JTAG taps where numbered from 0..N this
feature is still present, however its use is highly discouraged and
-should not be counted upon.
+should not be counted upon. Update all of your scripts to use
+TAP names rather than numbers.
@item @b{Multiple chips}
@* If your board has multiple chips, you should be
able to @b{source} two configuration files, in the proper order, and
@@ -2045,8 +2048,8 @@ jtag configure DOTTED.NAME -event tap-disable @{
@itemize @bullet
@item @b{NAME}
@* Is the name of the debug target. By convention it should be the tap
-DOTTED.NAME, this name is also used to create the target object
-command.
+DOTTED.NAME. This name is also used to create the target object
+command, and in other places the target needs to be identified.
@item @b{TYPE}
@* Specifies the target type, i.e.: ARM7TDMI, or Cortex-M3. Currently supported targets are:
@comment START types
@@ -2254,7 +2257,7 @@ The @b{flash bank} command is used to configure one or more flash chips (or bank
@example
@b{flash bank} <@var{driver}> <@var{base}> <@var{size}> <@var{chip_width}>
-<@var{bus_width}> <@var{target#}> [@var{driver_options ...}]
+<@var{bus_width}> <@var{target}> [@var{driver_options ...}]
@end example
@cindex flash bank
@*Configures a flash bank at <@var{base}> of <@var{size}> bytes and <@var{chip_width}>
@@ -2274,8 +2277,9 @@ perhaps configure a GPIO pin that controls the ``write protect'' pin
on the flash chip.
@b{flash bank cfi} <@var{base}> <@var{size}> <@var{chip_width}> <@var{bus_width}>
-<@var{target#}> [@var{jedec_probe}|@var{x16_as_x8}]
-@*CFI flashes require the number of the target they're connected to as an additional
+<@var{target}> [@var{jedec_probe}|@var{x16_as_x8}]
+@*CFI flashes require the name or number of the target they're connected to
+as an additional
argument. The CFI driver makes use of a working area (specified for the target)
to significantly speed up operation.
@@ -2289,12 +2293,13 @@ The @var{jedec_probe} option is used to detect certain non-CFI flash ROMs, like
@subsubsection lpc2000 options
@cindex lpc2000 options
-@b{flash bank lpc2000} <@var{base}> <@var{size}> 0 0 <@var{target#}> <@var{variant}>
+@b{flash bank lpc2000} <@var{base}> <@var{size}> 0 0 <@var{target}> <@var{variant}>
<@var{clock}> [@var{calc_checksum}]
@*LPC flashes don't require the chip and bus width to be specified. Additional
parameters are the <@var{variant}>, which may be @var{lpc2000_v1} (older LPC21xx and LPC22xx)
-or @var{lpc2000_v2} (LPC213x, LPC214x, LPC210[123], LPC23xx and LPC24xx), the number
-of the target this flash belongs to (first is 0), the frequency at which the core
+or @var{lpc2000_v2} (LPC213x, LPC214x, LPC210[123], LPC23xx and LPC24xx),
+the name or number of the target this flash belongs to (first is 0),
+the frequency at which the core
is currently running (in kHz - must be an integral number), and the optional keyword
@var{calc_checksum}, telling the driver to calculate a valid checksum for the exception
vector table.
@@ -2303,20 +2308,20 @@ vector table.
@subsubsection at91sam7 options
@cindex at91sam7 options
-@b{flash bank at91sam7} 0 0 0 0 <@var{target#}>
-@*AT91SAM7 flashes only require the @var{target#}, all other values are looked up after
+@b{flash bank at91sam7} 0 0 0 0 <@var{target}>
+@*AT91SAM7 flashes only require the @var{target}, all other values are looked up after
reading the chip-id and type.
@subsubsection str7 options
@cindex str7 options
-@b{flash bank str7x} <@var{base}> <@var{size}> 0 0 <@var{target#}> <@var{variant}>
+@b{flash bank str7x} <@var{base}> <@var{size}> 0 0 <@var{target}> <@var{variant}>
@*variant can be either STR71x, STR73x or STR75x.
@subsubsection str9 options
@cindex str9 options
-@b{flash bank str9x} <@var{base}> <@var{size}> 0 0 <@var{target#}>
+@b{flash bank str9x} <@var{base}> <@var{size}> 0 0 <@var{target}>
@*The str9 needs the flash controller to be configured prior to Flash programming, e.g.
@example
str9x flash_config 0 4 2 0 0x80000
@@ -2325,7 +2330,7 @@ This will setup the BBSR, NBBSR, BBADR and NBBADR registers respectively.
@subsubsection str9 options (str9xpec driver)
-@b{flash bank str9xpec} <@var{base}> <@var{size}> 0 0 <@var{target#}>
+@b{flash bank str9xpec} <@var{base}> <@var{size}> 0 0 <@var{target}>
@*Before using the flash commands the turbo mode must be enabled using str9xpec
@option{enable_turbo} <@var{num>.}
@@ -2335,25 +2340,25 @@ Use the standard str9 driver for programming. @xref{STR9 specific commands}.
@subsubsection Stellaris (LM3Sxxx) options
@cindex Stellaris (LM3Sxxx) options
-@b{flash bank stellaris} <@var{base}> <@var{size}> 0 0 <@var{target#}>
-@*Stellaris flash plugin only require the @var{target#}.
+@b{flash bank stellaris} <@var{base}> <@var{size}> 0 0 <@var{target}>
+@*Stellaris flash plugin only require the @var{target}.
@subsubsection stm32x options
@cindex stm32x options
-@b{flash bank stm32x} <@var{base}> <@var{size}> 0 0 <@var{target#}>
-@*stm32x flash plugin only require the @var{target#}.
+@b{flash bank stm32x} <@var{base}> <@var{size}> 0 0 <@var{target}>
+@*stm32x flash plugin only require the @var{target}.
@subsubsection aduc702x options
@cindex aduc702x options
-@b{flash bank aduc702x} 0 0 0 0 <@var{target#}>
-@*The aduc702x flash plugin works with Analog Devices model numbers ADUC7019 through ADUC7028. The setup command only requires the @var{target#} argument (all devices in this family have the same memory layout).
+@b{flash bank aduc702x} 0 0 0 0 <@var{target}>
+@*The aduc702x flash plugin works with Analog Devices model numbers ADUC7019 through ADUC7028. The setup command only requires the @var{target} argument (all devices in this family have the same memory layout).
@subsection mFlash Configuration
@cindex mFlash Configuration
@b{mflash bank} <@var{soc}> <@var{base}> <@var{chip_width}> <@var{bus_width}>
-<@var{RST pin}> <@var{WP pin}> <@var{DPD pin}> <@var{target #}>
+<@var{RST pin}> <@var{WP pin}> <@var{DPD pin}> <@var{target}>
@cindex mflash bank
@*Configures a mflash for <@var{soc}> host bank at
<@var{base}>. <@var{chip_width}> and <@var{bus_width}> are bytes
diff --git a/src/flash/ecos.c b/src/flash/ecos.c
index 3c2b456b..e1fa2d66 100644
--- a/src/flash/ecos.c
+++ b/src/flash/ecos.c
@@ -164,10 +164,10 @@ static int ecosflash_flash_bank_command(struct command_context_s *cmd_ctx, char
bank->sectors[i].is_protected = 0;
}
- info->target = get_target_by_num(strtoul(args[5], NULL, 0));
+ info->target = get_target(args[5]);
if (info->target == NULL)
{
- LOG_ERROR("no target '%i' configured", (int)strtoul(args[5], NULL, 0));
+ LOG_ERROR("target '%s' not defined", args[5]);
return ERROR_FAIL;
}
return ERROR_OK;
diff --git a/src/flash/flash.c b/src/flash/flash.c
index 4f4d272a..ff66a396 100644
--- a/src/flash/flash.c
+++ b/src/flash/flash.c
@@ -261,9 +261,9 @@ static int handle_flash_bank_command(struct command_context_s *cmd_ctx, char *cm
return ERROR_COMMAND_SYNTAX_ERROR;
}
- if ((target = get_target_by_num(strtoul(args[5], NULL, 0))) == NULL)
+ if ((target = get_target(args[5])) == NULL)
{
- LOG_ERROR("target %lu not defined", strtoul(args[5], NULL, 0));
+ LOG_ERROR("target '%s' not defined", args[5]);
return ERROR_FAIL;
}
diff --git a/src/flash/lpc3180_nand_controller.c b/src/flash/lpc3180_nand_controller.c
index 50846b92..1cbd9204 100644
--- a/src/flash/lpc3180_nand_controller.c
+++ b/src/flash/lpc3180_nand_controller.c
@@ -71,10 +71,10 @@ static int lpc3180_nand_device_command(struct command_context_s *cmd_ctx, char *
lpc3180_info = malloc(sizeof(lpc3180_nand_controller_t));
device->controller_priv = lpc3180_info;
- lpc3180_info->target = get_target_by_num(strtoul(args[1], NULL, 0));
+ lpc3180_info->target = get_target(args[1]);
if (!lpc3180_info->target)
{
- LOG_ERROR("no target '%s' configured", args[1]);
+ LOG_ERROR("target '%s' not defined", args[1]);
return ERROR_NAND_DEVICE_INVALID;
}
diff --git a/src/flash/mflash.c b/src/flash/mflash.c
index 8913e166..5df5261d 100644
--- a/src/flash/mflash.c
+++ b/src/flash/mflash.c
@@ -795,9 +795,9 @@ static int mflash_bank_command(struct command_context_s *cmd_ctx, char *cmd, cha
return ERROR_COMMAND_SYNTAX_ERROR;
}
- if ((target = get_target_by_num(strtoul(args[7], NULL, 0))) == NULL)
+ if ((target = get_target(args[7])) == NULL)
{
- LOG_ERROR("target %lu not defined", strtoul(args[7], NULL, 0));
+ LOG_ERROR("target '%s' not defined", args[7]);
return ERROR_FAIL;
}
diff --git a/src/flash/orion_nand.c b/src/flash/orion_nand.c
index fb5a3403..f6f41f35 100644
--- a/src/flash/orion_nand.c
+++ b/src/flash/orion_nand.c
@@ -210,9 +210,9 @@ int orion_nand_device_command(struct command_context_s *cmd_ctx, char *cmd,
}
device->controller_priv = hw;
- hw->target = get_target_by_num(strtoul(args[1], NULL, 0));
+ hw->target = get_target(args[1]);
if (!hw->target) {
- LOG_ERROR("no target '%s' configured", args[1]);
+ LOG_ERROR("target '%s' not defined", args[1]);
free(hw);
return ERROR_NAND_DEVICE_INVALID;
}
diff --git a/src/flash/s3c24xx_nand.c b/src/flash/s3c24xx_nand.c
index 291b658c..a26ac2d9 100644
--- a/src/flash/s3c24xx_nand.c
+++ b/src/flash/s3c24xx_nand.c
@@ -46,12 +46,12 @@ s3c24xx_nand_device_command(struct command_context_s *cmd_ctx, char *cmd,
device->controller_priv = s3c24xx_info;
- s3c24xx_info->target = get_target_by_num(strtoul(args[1], NULL, 0));
+ s3c24xx_info->target = get_target(args[1]);
if (s3c24xx_info->target == NULL) {
- LOG_ERROR("no target '%s' configured", args[1]);
+ LOG_ERROR("target '%s' not defined", args[1]);
return NULL;
}
-
+
return s3c24xx_info;
}
diff --git a/src/target/etb.c b/src/target/etb.c
index 5f6e648e..9a265ad5 100644
--- a/src/target/etb.c
+++ b/src/target/etb.c
@@ -372,11 +372,11 @@ static int handle_etb_config_command(struct command_context_s *cmd_ctx, char *cm
return ERROR_COMMAND_SYNTAX_ERROR;
}
- target = get_target_by_num(strtoul(args[0], NULL, 0));
+ target = get_target(args[0]);
if (!target)
{
- LOG_ERROR("target number '%s' not defined", args[0]);
+ LOG_ERROR("target '%s' not defined", args[0]);
return ERROR_FAIL;
}
diff --git a/src/target/etm.c b/src/target/etm.c
index c54087a0..5b83db89 100644
--- a/src/target/etm.c
+++ b/src/target/etm.c
@@ -1205,11 +1205,10 @@ static int handle_etm_config_command(struct command_context_s *cmd_ctx, char *cm
return ERROR_COMMAND_SYNTAX_ERROR;
}
- target = get_target_by_num(strtoul(args[0], NULL, 0));
-
+ target = get_target(args[0]);
if (!target)
{
- LOG_ERROR("target number '%s' not defined", args[0]);
+ LOG_ERROR("target '%s' not defined", args[0]);
return ERROR_FAIL;
}
diff --git a/src/target/etm_dummy.c b/src/target/etm_dummy.c
index ee4c3e69..4b84fd32 100644
--- a/src/target/etm_dummy.c
+++ b/src/target/etm_dummy.c
@@ -31,11 +31,11 @@ static int handle_etm_dummy_config_command(struct command_context_s *cmd_ctx, ch
armv4_5_common_t *armv4_5;
arm7_9_common_t *arm7_9;
- target = get_target_by_num(strtoul(args[0], NULL, 0));
+ target = get_target(args[0]);
if (!target)
{
- LOG_ERROR("target number '%s' not defined", args[0]);
+ LOG_ERROR("target '%s' not defined", args[0]);
return ERROR_FAIL;
}
diff --git a/src/target/image.c b/src/target/image.c
index 71939e79..d72680d1 100644
--- a/src/target/image.c
+++ b/src/target/image.c
@@ -711,10 +711,11 @@ int image_open(image_t *image, char *url, char *type_string)
}
else if (image->type == IMAGE_MEMORY)
{
- target_t *target = get_target_by_num(strtoul(url, NULL, 0));
- if (target==NULL)
+ target_t *target = get_target(url);
+
+ if (target == NULL)
{
- LOG_ERROR("Target '%s' does not exist", url);
+ LOG_ERROR("target '%s' not defined", url);
return ERROR_FAIL;
}
diff --git a/src/target/target.c b/src/target/target.c
index 3ec28284..7571e4e3 100644
--- a/src/target/target.c
+++ b/src/target/target.c
@@ -320,8 +320,36 @@ void target_buffer_set_u8(target_t *target, u8 *buffer, u8 value)
*buffer = value;
}
+/* return a pointer to a configured target; id is name or number */
+target_t *get_target(const char *id)
+{
+ target_t *target;
+ char *endptr;
+ int num;
+
+ /* try as tcltarget name */
+ for (target = all_targets; target; target = target->next) {
+ if (target->cmd_name == NULL)
+ continue;
+ if (strcmp(id, target->cmd_name) == 0)
+ return target;
+ }
+
+ /* no match, try as number */
+ num = strtoul(id, &endptr, 0);
+ if (*endptr != 0)
+ return NULL;
+
+ for (target = all_targets; target; target = target->next) {
+ if (target->target_number == num)
+ return target;
+ }
+
+ return NULL;
+}
+
/* returns a pointer to the n-th configured target */
-target_t* get_target_by_num(int num)
+static target_t *get_target_by_num(int num)
{
target_t *target = all_targets;
@@ -1333,35 +1361,16 @@ int target_register_user_commands(struct command_context_s *cmd_ctx)
static int handle_targets_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
{
- char *cp;
target_t *target = all_targets;
if (argc == 1)
{
- /* try as tcltarget name */
- for( target = all_targets ; target ; target = target->next ){
- if( target->cmd_name ){
- if( 0 == strcmp( args[0], target->cmd_name ) ){
- /* MATCH */
- goto Match;
- }
- }
- }
- /* no match, try as number */
-
- int num = strtoul(args[0], &cp, 0 );
- if( *cp != 0 ){
- /* then it was not a number */
- command_print( cmd_ctx, "Target: %s unknown, try one of:\n", args[0] );
- goto DumpTargets;
- }
-
- target = get_target_by_num( num );
- if( target == NULL ){
+ target = get_target(args[0]);
+ if (target == NULL) {
command_print(cmd_ctx,"Target: %s is unknown, try one of:\n", args[0] );
goto DumpTargets;
}
- Match:
+
cmd_ctx->current_target = target->target_number;
return ERROR_OK;
}
diff --git a/src/target/target.h b/src/target/target.h
index 4a6dde1a..1c1e10ef 100644
--- a/src/target/target.h
+++ b/src/target/target.h
@@ -371,7 +371,7 @@ extern int target_call_timer_callbacks_now(void);
extern target_t* get_current_target(struct command_context_s *cmd_ctx);
extern int get_num_by_target(target_t *query_target);
-extern target_t* get_target_by_num(int num);
+extern target_t *get_target(const char *id);
extern int target_write_buffer(struct target_s *target, u32 address, u32 size, u8 *buffer);
extern int target_read_buffer(struct target_s *target, u32 address, u32 size, u8 *buffer);
diff --git a/src/target/target/ti_dm355.cfg b/src/target/target/ti_dm355.cfg
index acf4b304..e4de1a58 100644
--- a/src/target/target/ti_dm355.cfg
+++ b/src/target/target/ti_dm355.cfg
@@ -56,8 +56,5 @@ arm7_9 fast_memory_access enable
arm7_9 dcc_downloads enable
# trace setup
-# FIXME we ought to be able to say "... config $_TARGETNAME ..."
-# (not "config 0") facilitating additional targets (e.g. other chips)
-etm config 0 16 normal full etb
-etb config 0 $_CHIPNAME.etb
-
+etm config $_TARGETNAME 16 normal full etb
+etb config $_TARGETNAME $_CHIPNAME.etb
diff --git a/src/target/xscale.c b/src/target/xscale.c
index abdbe866..3947da0b 100644
--- a/src/target/xscale.c
+++ b/src/target/xscale.c
@@ -3147,9 +3147,9 @@ int xscale_handle_debug_handler_command(struct command_context_s *cmd_ctx, char
return ERROR_OK;
}
- if ((target = get_target_by_num(strtoul(args[0], NULL, 0))) == NULL)
+ if ((target = get_target(args[0])) == NULL)
{
- LOG_ERROR("no target '%s' configured", args[0]);
+ LOG_ERROR("target '%s' not defined", args[0]);
return ERROR_FAIL;
}
@@ -3187,9 +3187,10 @@ int xscale_handle_cache_clean_address_command(struct command_context_s *cmd_ctx,
return ERROR_COMMAND_SYNTAX_ERROR;
}
- if ((target = get_target_by_num(strtoul(args[0], NULL, 0))) == NULL)
+ target = get_target(args[0]);
+ if (target == NULL)
{
- LOG_ERROR("no target '%s' configured", args[0]);
+ LOG_ERROR("target '%s' not defined", args[0]);
return ERROR_FAIL;
}