diff options
Diffstat (limited to 'doc/openocd.texi')
| -rw-r--r-- | doc/openocd.texi | 51 |
1 files changed, 0 insertions, 51 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi index de73bec7..e04b83c8 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -5431,23 +5431,6 @@ Display cp15 register @var{regnum}; else if a @var{value} is provided, that value is written to that register. @end deffn -@deffn Command {arm720t mdw_phys} addr [count] -@deffnx Command {arm720t mdh_phys} addr [count] -@deffnx Command {arm720t mdb_phys} addr [count] -Display contents of physical address @var{addr}, as -32-bit words (@command{mdw_phys}), 16-bit halfwords (@command{mdh_phys}), -or 8-bit bytes (@command{mdb_phys}). -If @var{count} is specified, displays that many units. -@end deffn - -@deffn Command {arm720t mww_phys} addr word -@deffnx Command {arm720t mwh_phys} addr halfword -@deffnx Command {arm720t mwb_phys} addr byte -Writes the specified @var{word} (32 bits), -@var{halfword} (16 bits), or @var{byte} (8-bit) pattern, -at the specified physical address @var{addr}. -@end deffn - @subsection ARM9 specific commands @cindex ARM9 @@ -5508,23 +5491,6 @@ Else if that value is written using the specified @var{address}, or using zero if no other address is not provided. @end deffn -@deffn Command {arm920t mdw_phys} addr [count] -@deffnx Command {arm920t mdh_phys} addr [count] -@deffnx Command {arm920t mdb_phys} addr [count] -Display contents of physical address @var{addr}, as -32-bit words (@command{mdw_phys}), 16-bit halfwords (@command{mdh_phys}), -or 8-bit bytes (@command{mdb_phys}). -If @var{count} is specified, displays that many units. -@end deffn - -@deffn Command {arm920t mww_phys} addr word -@deffnx Command {arm920t mwh_phys} addr halfword -@deffnx Command {arm920t mwb_phys} addr byte -Writes the specified @var{word} (32 bits), -@var{halfword} (16 bits), or @var{byte} (8-bit) pattern, -at the specified physical address @var{addr}. -@end deffn - @deffn Command {arm920t read_cache} filename Dump the content of ICache and DCache to a file named @file{filename}. @end deffn @@ -5556,23 +5522,6 @@ If a @var{value} is provided, that value is written to that register. Else that register is read and displayed. @end deffn -@deffn Command {arm926ejs mdw_phys} addr [count] -@deffnx Command {arm926ejs mdh_phys} addr [count] -@deffnx Command {arm926ejs mdb_phys} addr [count] -Display contents of physical address @var{addr}, as -32-bit words (@command{mdw_phys}), 16-bit halfwords (@command{mdh_phys}), -or 8-bit bytes (@command{mdb_phys}). -If @var{count} is specified, displays that many units. -@end deffn - -@deffn Command {arm926ejs mww_phys} addr word -@deffnx Command {arm926ejs mwh_phys} addr halfword -@deffnx Command {arm926ejs mwb_phys} addr byte -Writes the specified @var{word} (32 bits), -@var{halfword} (16 bits), or @var{byte} (8-bit) pattern, -at the specified physical address @var{addr}. -@end deffn - @subsection ARM966E specific commands @cindex ARM966E |