diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/openocd.texi | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi index 9d565231..cda5be38 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -2592,13 +2592,15 @@ debugging targets.) Here's what the scan chain might look like for a chip more than one TAP: @verbatim - TapName Enabled IdCode Expected IrLen IrCap IrMask Instr --- ------------------ ------- ---------- ---------- ----- ----- ------ ----- - 0 omap5912.dsp Y 0x03df1d81 0x03df1d81 38 0 0 0x... - 1 omap5912.arm Y 0x0692602f 0x0692602f 4 0x1 0 0xc - 2 omap5912.unknown Y 0x00000000 0x00000000 8 0 0 0xff + TapName Enabled IdCode Expected IrLen IrCap IrMask +-- ------------------ ------- ---------- ---------- ----- ----- ------ + 0 omap5912.dsp Y 0x03df1d81 0x03df1d81 38 0x01 0x03 + 1 omap5912.arm Y 0x0692602f 0x0692602f 4 0x01 0x0f + 2 omap5912.unknown Y 0x00000000 0x00000000 8 0x01 0x03 @end verbatim +OpenOCD can detect some of that information, but not all +of it. @xref{Autoprobing}. Unfortunately those TAPs can't always be autoconfigured, because not all devices provide good support for that. JTAG doesn't require supporting IDCODE instructions, and @@ -2659,8 +2661,6 @@ The set of TAPs listed by this command is fixed by exiting the OpenOCD configuration stage, but systems with a JTAG router can enable or disable TAPs dynamically. -In addition to the enable/disable status, the contents of -each TAP's instruction register can also change. @end deffn @c FIXME! "jtag cget" should be able to return all TAP |