diff options
Diffstat (limited to 'src/flash/nor')
-rw-r--r-- | src/flash/nor/Makefile.am | 2 | ||||
-rw-r--r-- | src/flash/nor/drivers.c | 2 | ||||
-rw-r--r-- | src/flash/nor/spearsmi.c | 713 | ||||
-rw-r--r-- | src/flash/nor/spearsmi.h | 30 |
4 files changed, 747 insertions, 0 deletions
diff --git a/src/flash/nor/Makefile.am b/src/flash/nor/Makefile.am index eec6f504..511e899e 100644 --- a/src/flash/nor/Makefile.am +++ b/src/flash/nor/Makefile.am @@ -23,6 +23,7 @@ NOR_DRIVERS = \ non_cfi.c \ ocl.c \ pic32mx.c \ + spearsmi.c \ stellaris.c \ stm32x.c \ str7x.c \ @@ -44,6 +45,7 @@ noinst_HEADERS = \ non_cfi.h \ ocl.h \ pic32mx.h \ + spearsmi.h \ stellaris.h \ stm32x.h \ str7x.h \ diff --git a/src/flash/nor/drivers.c b/src/flash/nor/drivers.c index 68f2f88a..f89e3f06 100644 --- a/src/flash/nor/drivers.c +++ b/src/flash/nor/drivers.c @@ -40,6 +40,7 @@ extern struct flash_driver pic32mx_flash; extern struct flash_driver avr_flash; extern struct flash_driver faux_flash; extern struct flash_driver virtual_flash; +extern struct flash_driver spearsmi_flash; /** * The list of built-in flash drivers. @@ -65,6 +66,7 @@ static struct flash_driver *flash_drivers[] = { &avr_flash, &faux_flash, &virtual_flash, + &spearsmi_flash, NULL, }; diff --git a/src/flash/nor/spearsmi.c b/src/flash/nor/spearsmi.c new file mode 100644 index 00000000..19a44054 --- /dev/null +++ b/src/flash/nor/spearsmi.c @@ -0,0 +1,713 @@ +/*************************************************************************** + * Copyright (C) 2010 by Antonio Borneo <borneo.antonio@gmail.com> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + ***************************************************************************/ + +/* ATTENTION: + * To have flash memory mapped in CPU memory space, the SMI controller + * have to be in "HW mode". This requires following constraints: + * 1) The command "reset init" have to initialize SMI controller and put + * it in HW mode; + * 2) every command in this file have to return to prompt in HW mode. */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "imp.h" +#include "spearsmi.h" +#include <jtag/jtag.h> +#include <helper/time_support.h> + +#define JTAG_ID_3XX_6XX (0x07926041) + +#define SMI_READ_REG(a) (_SMI_READ_REG(a)) +#define _SMI_READ_REG(a) \ +{ \ + int __a; \ + uint32_t __v; \ + \ + __a = target_read_u32(target, io_base + (a), &__v); \ + if (__a != ERROR_OK) \ + return __a; \ + __v; \ +} + +#define SMI_WRITE_REG(a,v) \ +{ \ + int __r; \ + \ + __r = target_write_u32(target, io_base + (a), (v)); \ + if (__r != ERROR_OK) \ + return __r; \ +} + +#define SMI_POLL_TFF(timeout) \ +{ \ + int __r; \ + \ + __r = poll_tff(target, io_base, timeout); \ + if (__r != ERROR_OK) \ + return __r; \ +} + +#define SMI_SET_SW_MODE() SMI_WRITE_REG(SMI_CR1, \ + SMI_READ_REG(SMI_CR1) | SMI_SW_MODE) +#define SMI_SET_HWWB_MODE() SMI_WRITE_REG(SMI_CR1, \ + (SMI_READ_REG(SMI_CR1) | SMI_WB_MODE) & ~SMI_SW_MODE) +#define SMI_SET_HW_MODE() SMI_WRITE_REG(SMI_CR1, \ + SMI_READ_REG(SMI_CR1) & ~(SMI_SW_MODE | SMI_WB_MODE)) +#define SMI_CLEAR_TFF() SMI_WRITE_REG(SMI_SR, ~SMI_TFF) + +#define SMI_BANK_SIZE (0x01000000) + +#define SMI_BASE_3XX_6XX (0xf8000000) +#define SMI_CFGREG_3XX_6XX (0xfc000000) + +/* #define SMI_BASE_13XX (0xe6000000) */ +/* #define SMI_CFGREG_13XX (0xea000000) */ + +#define SMI_CR1 (0x00) /* Control register 1 */ +#define SMI_CR2 (0x04) /* Control register 2 */ +#define SMI_SR (0x08) /* Status register */ +#define SMI_TR (0x0c) /* TX */ +#define SMI_RR (0x10) /* RX */ + +/* fields in SMI_CR1 */ +#define SMI_SW_MODE 0x10000000 /* set to enable SW Mode */ +#define SMI_WB_MODE 0x20000000 /* Write Burst Mode */ + +/* fields in SMI_CR2 */ +#define SMI_TX_LEN_1 0x00000001 /* data length = 1 byte */ +#define SMI_TX_LEN_4 0x00000004 /* data length = 4 byte */ +#define SMI_RX_LEN_3 0x00000030 /* data length = 3 byte */ +#define SMI_SEND 0x00000080 /* Send data */ +#define SMI_RSR 0x00000400 /* reads status reg */ +#define SMI_WE 0x00000800 /* Write Enable */ +#define SMI_SEL_BANK0 0x00000000 /* Select Bank0 */ +#define SMI_SEL_BANK1 0x00001000 /* Select Bank1 */ +#define SMI_SEL_BANK2 0x00002000 /* Select Bank2 */ +#define SMI_SEL_BANK3 0x00003000 /* Select Bank3 */ + +/* fields in SMI_SR */ +#define SMI_WIP_BIT 0x00000001 /* WIP Bit of SPI SR on SMI SR */ +#define SMI_WEL_BIT 0x00000002 /* WEL Bit of SPI SR on SMI SR */ +#define SMI_TFF 0x00000100 /* Transfer Finished Flag */ + +/* Commands */ +#define SMI_READ_ID 0x0000009F /* Read Flash Identification */ + +/* Timeout in ms */ +#define SMI_CMD_TIMEOUT (100) +#define SMI_PROBE_TIMEOUT (100) +#define SMI_MAX_TIMEOUT (3000) + +/* data structure to maintain flash ids from different vendors */ +struct flash_device { + char *name; + uint8_t erase_cmd; + uint32_t device_id; + uint32_t pagesize; + unsigned long sectorsize; + unsigned long size_in_bytes; +}; + +#define FLASH_ID(n, es, id, psize, ssize, size) \ +{ \ + .name = n, \ + .erase_cmd = es, \ + .device_id = id, \ + .pagesize = psize, \ + .sectorsize = ssize, \ + .size_in_bytes = size \ +} + +static struct flash_device flash_devices[] = { + /* name, erase_cmd, device_id, pagesize, sectorsize, size_in_bytes */ + FLASH_ID("st m25p05", 0xd8, 0x00102020, 0x80, 0x8000, 0x10000), + FLASH_ID("st m25p10", 0xd8, 0x00112020, 0x80, 0x8000, 0x20000), + FLASH_ID("st m25p20", 0xd8, 0x00122020, 0x100, 0x10000, 0x40000), + FLASH_ID("st m25p40", 0xd8, 0x00132020, 0x100, 0x10000, 0x80000), + FLASH_ID("st m25p80", 0xd8, 0x00142020, 0x100, 0x10000, 0x100000), + FLASH_ID("st m25p16", 0xd8, 0x00152020, 0x100, 0x10000, 0x200000), + FLASH_ID("st m25p32", 0xd8, 0x00162020, 0x100, 0x10000, 0x400000), + FLASH_ID("st m25p64", 0xd8, 0x00172020, 0x100, 0x10000, 0x800000), + FLASH_ID("st m25p128", 0xd8, 0x00182020, 0x100, 0x40000, 0x1000000), + FLASH_ID("st m45pe10", 0xd8, 0x00114020, 0x100, 0x10000, 0x20000), + FLASH_ID("st m45pe20", 0xd8, 0x00124020, 0x100, 0x10000, 0x40000), + FLASH_ID("st m45pe40", 0xd8, 0x00134020, 0x100, 0x10000, 0x80000), + FLASH_ID("st m45pe80", 0xd8, 0x00144020, 0x100, 0x10000, 0x100000), + FLASH_ID("sp s25fl004", 0xd8, 0x00120201, 0x100, 0x10000, 0x80000), + FLASH_ID("sp s25fl008", 0xd8, 0x00130201, 0x100, 0x10000, 0x100000), + FLASH_ID("sp s25fl016", 0xd8, 0x00140201, 0x100, 0x10000, 0x200000), + FLASH_ID("sp s25fl032", 0xd8, 0x00150201, 0x100, 0x10000, 0x400000), + FLASH_ID("sp s25fl064", 0xd8, 0x00160201, 0x100, 0x10000, 0x800000), + FLASH_ID("atmel 25f512", 0x52, 0x0065001f, 0x80, 0x8000, 0x10000), + FLASH_ID("atmel 25f1024", 0x52, 0x0060001f, 0x100, 0x8000, 0x20000), + FLASH_ID("atmel 25f2048", 0x52, 0x0063001f, 0x100, 0x10000, 0x40000), + FLASH_ID("atmel 25f4096", 0x52, 0x0064001f, 0x100, 0x10000, 0x80000), + FLASH_ID("atmel 25fs040", 0xd7, 0x0004661f, 0x100, 0x10000, 0x80000), + FLASH_ID("mac 25l512", 0xd8, 0x001020c2, 0x010, 0x10000, 0x10000), + FLASH_ID("mac 25l1005", 0xd8, 0x001120c2, 0x010, 0x10000, 0x20000), + FLASH_ID("mac 25l2005", 0xd8, 0x001220c2, 0x010, 0x10000, 0x40000), + FLASH_ID("mac 25l4005", 0xd8, 0x001320c2, 0x010, 0x10000, 0x80000), + FLASH_ID("mac 25l8005", 0xd8, 0x001420c2, 0x010, 0x10000, 0x100000), + FLASH_ID("mac 25l1605", 0xd8, 0x001520c2, 0x100, 0x10000, 0x200000), + FLASH_ID("mac 25l3205", 0xd8, 0x001620c2, 0x100, 0x10000, 0x400000), + FLASH_ID("mac 25l6405", 0xd8, 0x001720c2, 0x100, 0x10000, 0x800000), + FLASH_ID(NULL, 0, 0, 0, 0, 0) +}; + +FLASH_BANK_COMMAND_HANDLER(spearsmi_flash_bank_command) +{ + struct spearsmi_flash_bank *spearsmi_info; + + LOG_DEBUG(__FUNCTION__); + + if (CMD_ARGC < 6) + { + LOG_WARNING("incomplete flash_bank spearsmi configuration"); + return ERROR_FLASH_BANK_INVALID; + } + + spearsmi_info = malloc(sizeof(struct spearsmi_flash_bank)); + if (spearsmi_info == NULL) + { + LOG_ERROR("not enough memory"); + return ERROR_FAIL; + } + + bank->driver_priv = spearsmi_info; + spearsmi_info->probed = 0; + + return ERROR_OK; +} + +/* Poll transmit finished flag */ +/* timeout in ms */ +static int poll_tff(struct target *target, uint32_t io_base, int timeout) +{ + long long endtime; + + if (SMI_READ_REG(SMI_SR) & SMI_TFF) + return ERROR_OK; + + endtime = timeval_ms() + timeout; + do { + alive_sleep(1); + if (SMI_READ_REG(SMI_SR) & SMI_TFF) + return ERROR_OK; + } while (timeval_ms() < endtime); + + LOG_ERROR("Timeout while polling TFF"); + return ERROR_FLASH_OPERATION_FAILED; +} + +static int read_status_reg(struct flash_bank *bank, uint32_t *status) +{ + struct target *target = bank->target; + struct spearsmi_flash_bank *spearsmi_info = bank->driver_priv; + uint32_t io_base = spearsmi_info->io_base; + + /* clear transmit finished flag */ + SMI_CLEAR_TFF(); + + /* Read status */ + SMI_WRITE_REG(SMI_CR2, spearsmi_info->bank_num | SMI_RSR); + + /* Poll transmit finished flag */ + SMI_POLL_TFF(SMI_CMD_TIMEOUT); + + /* clear transmit finished flag */ + SMI_CLEAR_TFF(); + + /* Check write enabled */ + *status = SMI_READ_REG(SMI_SR) & 0x0000ffff; + + /* clean-up SMI_CR2 */ + SMI_WRITE_REG(SMI_CR2, 0); /* AB: Required ? */ + + return ERROR_OK; +} + +/* check for WIP (write in progress) bit in status register */ +/* timeout in ms */ +static int wait_till_ready(struct flash_bank *bank, int timeout) +{ + uint32_t status; + int retval; + long long endtime; + + endtime = timeval_ms() + timeout; + do { + /* read flash status register */ + retval = read_status_reg(bank, &status); + if (retval != ERROR_OK) + return retval; + + if ((status & SMI_WIP_BIT) == 0) + return ERROR_OK; + alive_sleep(1); + } while (timeval_ms() < endtime); + + LOG_ERROR("timeout"); + return ERROR_FAIL; +} + +static int smi_write_enable(struct flash_bank *bank) +{ + struct target *target = bank->target; + struct spearsmi_flash_bank *spearsmi_info = bank->driver_priv; + uint32_t io_base = spearsmi_info->io_base; + uint32_t status; + int retval; + + /* Enter in HW mode */ + SMI_SET_HW_MODE(); /* AB: is this correct ?*/ + + /* clear transmit finished flag */ + SMI_CLEAR_TFF(); + + /* Send write enable command */ + SMI_WRITE_REG(SMI_CR2, spearsmi_info->bank_num | SMI_WE); + + /* Poll transmit finished flag */ + SMI_POLL_TFF(SMI_CMD_TIMEOUT); + + /* read flash status register */ + retval = read_status_reg(bank, &status); + if (retval != ERROR_OK) + return retval; + + /* Check write enabled */ + if ((status & SMI_WEL_BIT) == 0) + { + LOG_ERROR("Cannot enable write to flash. Status=0x%08" PRIx32, status); + return ERROR_FAIL; + } + + return ERROR_OK; +} + +static uint32_t erase_command(struct spearsmi_flash_bank *spearsmi_info, + uint32_t offset) +{ + union { + uint32_t command; + uint8_t x[4]; + } cmd; + + cmd.x[0] = spearsmi_info->dev->erase_cmd; + cmd.x[1] = offset >> 16; + cmd.x[2] = offset >> 8; + cmd.x[3] = offset; + + return cmd.command; +} + +static int smi_erase_sector(struct flash_bank *bank, int sector) +{ + struct target *target = bank->target; + struct spearsmi_flash_bank *spearsmi_info = bank->driver_priv; + uint32_t io_base = spearsmi_info->io_base; + uint32_t cmd; + int retval; + + retval = smi_write_enable(bank); + if (retval != ERROR_OK) + return retval; + + /* Switch to SW mode to send sector erase command */ + SMI_SET_SW_MODE(); + + /* clear transmit finished flag */ + SMI_CLEAR_TFF(); + + /* send erase command */ + cmd = erase_command(spearsmi_info, bank->sectors[sector].offset); + SMI_WRITE_REG(SMI_TR, cmd); + SMI_WRITE_REG(SMI_CR2, spearsmi_info->bank_num | SMI_SEND | SMI_TX_LEN_4); + + /* Poll transmit finished flag */ + SMI_POLL_TFF(SMI_CMD_TIMEOUT); + + /* poll WIP for end of self timed Sector Erase cycle */ + retval = wait_till_ready(bank, SMI_MAX_TIMEOUT); + if (retval != ERROR_OK) + return retval; + + return ERROR_OK; +} + +static int spearsmi_erase(struct flash_bank *bank, int first, int last) +{ + struct target *target = bank->target; + struct spearsmi_flash_bank *spearsmi_info = bank->driver_priv; + uint32_t io_base = spearsmi_info->io_base; + int retval = ERROR_OK; + int sector; + + LOG_DEBUG("%s: from sector %d to sector %d", __FUNCTION__, first, last); + + if (target->state != TARGET_HALTED) + { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + if ((first < 0) || (last < first) || (last >= bank->num_sectors)) + { + LOG_ERROR("Flash sector invalid"); + return ERROR_FLASH_SECTOR_INVALID; + } + + if (!(spearsmi_info->probed)) + { + LOG_ERROR("Flash bank not probed"); + return ERROR_FLASH_BANK_NOT_PROBED; + } + + for (sector = first; sector <= last; sector++) + { + if (bank->sectors[sector].is_protected) + { + LOG_ERROR("Flash sector %d protected", sector); + return ERROR_FAIL; + } + } + + for (sector = first; sector <= last; sector++) + { + retval = smi_erase_sector(bank, sector); + if (retval != ERROR_OK) + break; + keep_alive(); + } + + /* Switch to HW mode before return to prompt */ + SMI_SET_HW_MODE(); + return retval; +} + +static int spearsmi_protect(struct flash_bank *bank, int set, + int first, int last) +{ + int sector; + + for (sector = first; sector <= last; sector++) + bank->sectors[sector].is_protected = set; + return ERROR_OK; +} + +static int smi_write_buffer(struct flash_bank *bank, uint8_t *buffer, + uint32_t address, uint32_t len) +{ + struct target *target = bank->target; + struct spearsmi_flash_bank *spearsmi_info = bank->driver_priv; + uint32_t io_base = spearsmi_info->io_base; + int retval; + + LOG_DEBUG("%s: address=0x%08" PRIx32 " len=0x%08" PRIx32, + __FUNCTION__, address, len); + + retval = smi_write_enable(bank); + if (retval != ERROR_OK) + return retval; + + /* HW mode, write burst mode */ + SMI_SET_HWWB_MODE(); + + retval = target_write_buffer(target, address, len, buffer); + if (retval != ERROR_OK) + return retval; + + return ERROR_OK; +} + +static int spearsmi_write(struct flash_bank *bank, uint8_t *buffer, + uint32_t offset, uint32_t count) +{ + struct target *target = bank->target; + struct spearsmi_flash_bank *spearsmi_info = bank->driver_priv; + uint32_t io_base = spearsmi_info->io_base; + uint32_t cur_count, page_size, page_offset; + int sector; + int retval = ERROR_OK; + + LOG_DEBUG("%s: offset=0x%08" PRIx32 " count=0x%08" PRIx32, + __FUNCTION__, offset, count); + + if (target->state != TARGET_HALTED) + { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + if (offset + count > spearsmi_info->dev->size_in_bytes) + { + LOG_WARNING("Write pasts end of flash. Extra data discarded."); + count = spearsmi_info->dev->size_in_bytes - offset; + } + + /* Check sector protection */ + for (sector = 0; sector < bank->num_sectors; sector++) + { + /* Start offset in or before this sector? */ + /* End offset in or behind this sector? */ + if ( (offset < + (bank->sectors[sector].offset + bank->sectors[sector].size)) + && ((offset + count - 1) >= bank->sectors[sector].offset) + && bank->sectors[sector].is_protected ) + { + LOG_ERROR("Flash sector %d protected", sector); + return ERROR_FAIL; + } + } + + page_size = spearsmi_info->dev->pagesize; + + /* unaligned buffer head */ + if (count > 0 && (offset & 3) != 0) + { + cur_count = 4 - (offset & 3); + if (cur_count > count) + cur_count = count; + retval = smi_write_buffer(bank, buffer, bank->base + offset, + cur_count); + if (retval != ERROR_OK) + goto err; + offset += cur_count; + buffer += cur_count; + count -= cur_count; + } + + page_offset = offset % page_size; + /* central part, aligned words */ + while (count >= 4) + { + /* clip block at page boundary */ + if (page_offset + count > page_size) + cur_count = page_size - page_offset; + else + cur_count = count & ~3; + + retval = smi_write_buffer(bank, buffer, bank->base + offset, + cur_count); + if (retval != ERROR_OK) + goto err; + + page_offset = 0; + buffer += cur_count; + offset += cur_count; + count -= cur_count; + + keep_alive(); + } + + /* buffer tail */ + if (count > 0) + retval = smi_write_buffer(bank, buffer, bank->base + offset, count); + +err: + /* Switch to HW mode before return to prompt */ + SMI_SET_HW_MODE(); + return retval; +} + +/* Return ID of flash device */ +/* On exit, SW mode is kept */ +static int read_flash_id(struct flash_bank *bank, uint32_t *id) +{ + struct target *target = bank->target; + struct spearsmi_flash_bank *spearsmi_info = bank->driver_priv; + uint32_t io_base = spearsmi_info->io_base; + int retval; + + if (target->state != TARGET_HALTED) + { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + /* poll WIP */ + retval = wait_till_ready(bank, SMI_PROBE_TIMEOUT); + if (retval != ERROR_OK) + return retval; + + /* enter in SW mode */ + SMI_SET_SW_MODE(); + + /* clear transmit finished flag */ + SMI_CLEAR_TFF(); + + /* Require read flash ID */ + SMI_WRITE_REG(SMI_TR, SMI_READ_ID); + SMI_WRITE_REG(SMI_CR2, + spearsmi_info->bank_num | SMI_SEND | SMI_RX_LEN_3 | SMI_TX_LEN_1); + + /* Poll transmit finished flag */ + SMI_POLL_TFF(SMI_CMD_TIMEOUT); + + /* clear transmit finished flag */ + SMI_CLEAR_TFF(); + + /* read ID */ + *id = SMI_READ_REG(SMI_RR) & 0x00ffffff; + return ERROR_OK; +} + +static int spearsmi_probe(struct flash_bank *bank) +{ + struct target *target = bank->target; + struct spearsmi_flash_bank *spearsmi_info = bank->driver_priv; + uint32_t io_base; + struct flash_sector *sectors; + uint32_t id = 0; /* silence uninitialized warning */ + int retval; + + if (spearsmi_info->probed) + free(bank->sectors); + spearsmi_info->probed = 0; + + /* check for SPEAr device */ + switch (target->tap->idcode) + { + case JTAG_ID_3XX_6XX: + /* SPEAr3xx/6xx */ + spearsmi_info->io_base = SMI_CFGREG_3XX_6XX; + switch (bank->base) + { + case SMI_BASE_3XX_6XX: + spearsmi_info->bank_num = SMI_SEL_BANK0; + break; + case SMI_BASE_3XX_6XX + SMI_BANK_SIZE: + spearsmi_info->bank_num = SMI_SEL_BANK1; + break; + case SMI_BASE_3XX_6XX + 2*SMI_BANK_SIZE: + spearsmi_info->bank_num = SMI_SEL_BANK2; + break; + case SMI_BASE_3XX_6XX + 3*SMI_BANK_SIZE: + spearsmi_info->bank_num = SMI_SEL_BANK3; + break; + default: + LOG_ERROR("Invalid base address 0x%" PRIx32, bank->base); + return ERROR_FAIL; + } + break; + + default: + LOG_ERROR("0x%" PRIx32 " is invalid id for SPEAr device", + target->tap->idcode); + return ERROR_FAIL; + } + io_base = spearsmi_info->io_base; + + /* read and decode flash ID; returns in SW mode */ + retval = read_flash_id(bank, &id); + SMI_SET_HW_MODE(); + if (retval != ERROR_OK) + return retval; + + for (struct flash_device *p = flash_devices; p->name ; p++) + if (p->device_id == id) { + spearsmi_info->dev = p; + break; + } + + if (!spearsmi_info->dev) + { + LOG_ERROR("Unknown flash device (ID 0x%08" PRIx32 ")", id); + return ERROR_FAIL; + } + + LOG_INFO("Found flash device \'%s\' (ID 0x%08" PRIx32 ")", + spearsmi_info->dev->name, spearsmi_info->dev->device_id); + + /* Set correct size value */ + bank->size = spearsmi_info->dev->size_in_bytes; + + /* create and fill sectors array */ + bank->num_sectors = + spearsmi_info->dev->size_in_bytes / spearsmi_info->dev->sectorsize; + sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors); + if (sectors == NULL) + { + LOG_ERROR("not enough memory"); + return ERROR_FAIL; + } + + for (int sector = 0; sector < bank->num_sectors; sector++) + { + sectors[sector].offset = sector * spearsmi_info->dev->sectorsize; + sectors[sector].size = spearsmi_info->dev->sectorsize; + sectors[sector].is_erased = -1; + sectors[sector].is_protected = 1; + } + + bank->sectors = sectors; + spearsmi_info->probed = 1; + return ERROR_OK; +} + +static int spearsmi_auto_probe(struct flash_bank *bank) +{ + struct spearsmi_flash_bank *spearsmi_info = bank->driver_priv; + if (spearsmi_info->probed) + return ERROR_OK; + return spearsmi_probe(bank); +} + +static int spearsmi_protect_check(struct flash_bank *bank) +{ + /* Nothing to do. Protection is only handled in SW. */ + return ERROR_OK; +} + +static int get_spearsmi_info(struct flash_bank *bank, char *buf, int buf_size) +{ + struct spearsmi_flash_bank *spearsmi_info = bank->driver_priv; + int printed; + + if (!(spearsmi_info->probed)) + { + printed = snprintf(buf, buf_size, + "\nSPEAr SMI flash bank not probed yet\n"); + return ERROR_OK; + } + + printed = snprintf(buf, buf_size, "\nSPEAr SMI flash information:\n" + " Device \'%s\' (ID 0x%08x)\n", + spearsmi_info->dev->name, spearsmi_info->dev->device_id); + buf += printed; + buf_size -= printed; + + return ERROR_OK; +} + +struct flash_driver spearsmi_flash = { + .name = "spearsmi", + .flash_bank_command = spearsmi_flash_bank_command, + .erase = spearsmi_erase, + .protect = spearsmi_protect, + .write = spearsmi_write, + .read = default_flash_read, + .probe = spearsmi_probe, + .auto_probe = spearsmi_auto_probe, + .erase_check = default_flash_blank_check, + .protect_check = spearsmi_protect_check, + .info = get_spearsmi_info, +}; diff --git a/src/flash/nor/spearsmi.h b/src/flash/nor/spearsmi.h new file mode 100644 index 00000000..03fabe3a --- /dev/null +++ b/src/flash/nor/spearsmi.h @@ -0,0 +1,30 @@ +/*************************************************************************** + * Copyright (C) 2010 by Antonio Borneo <borneo.antonio@gmail.com> * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + ***************************************************************************/ +#ifndef SPEARSMI_H +#define SPEARSMI_H + +struct spearsmi_flash_bank +{ + int probed; + uint32_t io_base; + uint32_t bank_num; + struct flash_device *dev; +}; + +#endif /* SPEARSMI_H */ |