diff options
Diffstat (limited to 'src/target/target/pic32mx.cfg')
-rw-r--r-- | src/target/target/pic32mx.cfg | 30 |
1 files changed, 25 insertions, 5 deletions
diff --git a/src/target/target/pic32mx.cfg b/src/target/target/pic32mx.cfg index 1d23ff2a..2ade5550 100644 --- a/src/target/target/pic32mx.cfg +++ b/src/target/target/pic32mx.cfg @@ -1,3 +1,23 @@ + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME pic32mx +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0xffffffff +} + jtag_nsrst_delay 100 jtag_ntrst_delay 100 @@ -6,13 +26,13 @@ reset_config srst_only #jtag scan chain #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) -jtag_device 5 0x1 0x1 0x1e +jtag newtap $_CPUNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_CPUTAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME mips_m4k -endian $_ENDIAN -chain-position $_TARGETNAME -target create target0 mips_m4k -endian little -chain-position 0 -[new_target_name] configure -work-area-virt 0 -work-area-phys 0xa0000000 -work-area-size 16384 -work-area-backup 0 +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0xa0000000 -work-area-size 16384 -work-area-backup 0 -#flash bank str7x <base> <size> 0 0 <target#> <variant> -#flash bank stm32x 0 0 0 0 0 # For more information about the configuration files, take a look at: # openocd.texi |