summaryrefslogtreecommitdiff
path: root/src/target
diff options
context:
space:
mode:
Diffstat (limited to 'src/target')
-rw-r--r--src/target/board/x300t.cfg34
-rw-r--r--src/target/interface/parport_dlc5.cfg14
-rw-r--r--src/target/target/smp8634.cfg64
3 files changed, 56 insertions, 56 deletions
diff --git a/src/target/board/x300t.cfg b/src/target/board/x300t.cfg
index 200bb58b..edc9be6c 100644
--- a/src/target/board/x300t.cfg
+++ b/src/target/board/x300t.cfg
@@ -1,17 +1,17 @@
-# This is for the T-Home X300T / X301T IPTV box,
-# which are based on IPTV reference designs from Kiss/Cisco KMM-32**
-#
-# It has Sigma Designs SMP8634 chip.
-source [find target/smp8634.cfg]
-
-$_TARGETNAME configure -event reset-init { x300t_init }
-
-# 1MB CFI capable flash
-# flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank cfi 0xac000000 0x100000 2 2 0
-
-proc x300t_init { } {
- # Setup SDRAM config and flash mapping
- # map flash to CPU address space REG_BASE_cpu_block+CPU_remap4
- mww 0x6f010 0x48000000
-}
+# This is for the T-Home X300T / X301T IPTV box,
+# which are based on IPTV reference designs from Kiss/Cisco KMM-32**
+#
+# It has Sigma Designs SMP8634 chip.
+source [find target/smp8634.cfg]
+
+$_TARGETNAME configure -event reset-init { x300t_init }
+
+# 1MB CFI capable flash
+# flash bank <driver> <base> <size> <chip_width> <bus_width>
+flash bank cfi 0xac000000 0x100000 2 2 0
+
+proc x300t_init { } {
+ # Setup SDRAM config and flash mapping
+ # map flash to CPU address space REG_BASE_cpu_block+CPU_remap4
+ mww 0x6f010 0x48000000
+}
diff --git a/src/target/interface/parport_dlc5.cfg b/src/target/interface/parport_dlc5.cfg
index 346aedec..c9af2629 100644
--- a/src/target/interface/parport_dlc5.cfg
+++ b/src/target/interface/parport_dlc5.cfg
@@ -1,7 +1,7 @@
-telnet_port 4444
-gdb_port 2001
-
-interface parport
-parport_port /dev/parport0
-parport_cable dlc5
-jtag_speed 0
+telnet_port 4444
+gdb_port 2001
+
+interface parport
+parport_port /dev/parport0
+parport_cable dlc5
+jtag_speed 0
diff --git a/src/target/target/smp8634.cfg b/src/target/target/smp8634.cfg
index 2470a5da..c1d61882 100644
--- a/src/target/target/smp8634.cfg
+++ b/src/target/target/smp8634.cfg
@@ -1,32 +1,32 @@
-# script for Sigma Designs SMP8634 (eventually even SMP8635)
-
-if { [info exists CHIPNAME] } {
- set _CHIPNAME $CHIPNAME
-} else {
- set _CHIPNAME smp8634
-}
-
-if { [info exists ENDIAN] } {
- set _ENDIAN $ENDIAN
-} else {
- set _ENDIAN little
-}
-
-if { [info exists CPUTAPID ] } {
- set _CPUTAPID $CPUTAPID
-} else {
- # force an error till we get a good number
- set _CPUTAPID 0x08630001
-}
-
-jtag_nsrst_delay 100
-jtag_ntrst_delay 100
-
-reset_config trst_and_srst separate
-
-# jtag scan chain
-# format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1
-
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME mips_m4k -endian $_ENDIAN -variant
+# script for Sigma Designs SMP8634 (eventually even SMP8635)
+
+if { [info exists CHIPNAME] } {
+ set _CHIPNAME $CHIPNAME
+} else {
+ set _CHIPNAME smp8634
+}
+
+if { [info exists ENDIAN] } {
+ set _ENDIAN $ENDIAN
+} else {
+ set _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+ set _CPUTAPID $CPUTAPID
+} else {
+ # force an error till we get a good number
+ set _CPUTAPID 0x08630001
+}
+
+jtag_nsrst_delay 100
+jtag_ntrst_delay 100
+
+reset_config trst_and_srst separate
+
+# jtag scan chain
+# format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME mips_m4k -endian $_ENDIAN -variant