summaryrefslogtreecommitdiff
path: root/src/target
diff options
context:
space:
mode:
Diffstat (limited to 'src/target')
-rw-r--r--src/target/arm11.c42
-rw-r--r--src/target/arm11.h23
-rw-r--r--src/target/arm_dpm.h1
3 files changed, 24 insertions, 42 deletions
diff --git a/src/target/arm11.c b/src/target/arm11.c
index 124868e5..b01e33bd 100644
--- a/src/target/arm11.c
+++ b/src/target/arm11.c
@@ -40,6 +40,10 @@
#define _DEBUG_INSTRUCTION_EXECUTION_
#endif
+
+/* FIXME none of these flags should be global to all ARM11 cores!
+ * Most of them shouldn't exist at all, once the code works...
+ */
static bool arm11_config_memwrite_burst = true;
static bool arm11_config_memwrite_error_fatal = true;
static uint32_t arm11_vcr = 0;
@@ -59,18 +63,18 @@ static int arm11_check_init(struct arm11_common *arm11)
CHECK_RETVAL(arm11_read_DSCR(arm11));
LOG_DEBUG("DSCR %08x", (unsigned) arm11->dscr);
- if (!(arm11->dscr & ARM11_DSCR_MODE_SELECT))
+ if (!(arm11->dscr & DSCR_HALT_DBG_MODE))
{
LOG_DEBUG("Bringing target into debug mode");
- arm11->dscr |= ARM11_DSCR_MODE_SELECT; /* Halt debug-mode */
+ arm11->dscr |= DSCR_HALT_DBG_MODE;
arm11_write_DSCR(arm11, arm11->dscr);
/* add further reset initialization here */
arm11->simulate_reset_on_next_halt = true;
- if (arm11->dscr & ARM11_DSCR_CORE_HALTED)
+ if (arm11->dscr & DSCR_CORE_HALTED)
{
/** \todo TODO: this needs further scrutiny because
* arm11_debug_entry() never gets called. (WHY NOT?)
@@ -113,7 +117,7 @@ static int arm11_debug_entry(struct arm11_common *arm11)
/* See e.g. ARM1136 TRM, "14.8.4 Entering Debug state" */
/* maybe save wDTR (pending DCC write to debug SW, e.g. libdcc) */
- arm11->is_wdtr_saved = !!(arm11->dscr & ARM11_DSCR_WDTR_FULL);
+ arm11->is_wdtr_saved = !!(arm11->dscr & DSCR_DTR_TX_FULL);
if (arm11->is_wdtr_saved)
{
arm11_add_debug_SCAN_N(arm11, 0x05, ARM11_TAP_DEFAULT);
@@ -131,15 +135,13 @@ static int arm11_debug_entry(struct arm11_common *arm11)
}
- /* DSCR: set ARM11_DSCR_EXECUTE_ARM_INSTRUCTION_ENABLE
+ /* DSCR: set the Execute ARM instruction enable bit.
*
* ARM1176 spec says this is needed only for wDTR/rDTR's "ITR mode",
- * but not to issue ITRs. ARM1136 seems to require this to issue
- * ITR's as well...
+ * but not to issue ITRs(?). The ARMv7 arch spec says it's required
+ * for executing instructions via ITR.
*/
-
- arm11_write_DSCR(arm11, ARM11_DSCR_EXECUTE_ARM_INSTRUCTION_ENABLE
- | arm11->dscr);
+ arm11_write_DSCR(arm11, DSCR_ITR_EN | arm11->dscr);
/* From the spec:
@@ -188,7 +190,7 @@ static int arm11_debug_entry(struct arm11_common *arm11)
return retval;
/* maybe save rDTR (pending DCC read from debug SW, e.g. libdcc) */
- arm11->is_rdtr_saved = !!(arm11->dscr & ARM11_DSCR_RDTR_FULL);
+ arm11->is_rdtr_saved = !!(arm11->dscr & DSCR_DTR_RX_FULL);
if (arm11->is_rdtr_saved)
{
/* MRC p14,0,R0,c0,c5,0 (move rDTR -> r0 (-> wDTR -> local var)) */
@@ -248,7 +250,7 @@ static int arm11_leave_debug_state(struct arm11_common *arm11, bool bpwp)
{
CHECK_RETVAL(arm11_read_DSCR(arm11));
- if (arm11->dscr & (ARM11_DSCR_RDTR_FULL | ARM11_DSCR_WDTR_FULL))
+ if (arm11->dscr & (DSCR_DTR_RX_FULL | DSCR_DTR_TX_FULL))
{
/*
The wDTR/rDTR two registers that are used to send/receive data to/from
@@ -324,7 +326,7 @@ static int arm11_poll(struct target *target)
CHECK_RETVAL(arm11_check_init(arm11));
- if (arm11->dscr & ARM11_DSCR_CORE_HALTED)
+ if (arm11->dscr & DSCR_CORE_HALTED)
{
if (target->state != TARGET_HALTED)
{
@@ -401,7 +403,7 @@ static int arm11_halt(struct target *target)
{
CHECK_RETVAL(arm11_read_DSCR(arm11));
- if (arm11->dscr & ARM11_DSCR_CORE_HALTED)
+ if (arm11->dscr & DSCR_CORE_HALTED)
break;
@@ -529,7 +531,7 @@ static int arm11_resume(struct target *target, int current,
LOG_DEBUG("DSCR %08x", (unsigned) arm11->dscr);
- if (arm11->dscr & ARM11_DSCR_CORE_RESTARTED)
+ if (arm11->dscr & DSCR_CORE_RESTARTED)
break;
@@ -674,9 +676,9 @@ static int arm11_step(struct target *target, int current,
if (arm11_config_step_irq_enable)
/* this disable should be redundant ... */
- arm11->dscr &= ~ARM11_DSCR_INTERRUPTS_DISABLE;
+ arm11->dscr &= ~DSCR_INT_DIS;
else
- arm11->dscr |= ARM11_DSCR_INTERRUPTS_DISABLE;
+ arm11->dscr |= DSCR_INT_DIS;
CHECK_RETVAL(arm11_leave_debug_state(arm11, handle_breakpoints));
@@ -690,8 +692,8 @@ static int arm11_step(struct target *target, int current,
while (1)
{
- const uint32_t mask = ARM11_DSCR_CORE_RESTARTED
- | ARM11_DSCR_CORE_HALTED;
+ const uint32_t mask = DSCR_CORE_RESTARTED
+ | DSCR_CORE_HALTED;
CHECK_RETVAL(arm11_read_DSCR(arm11));
LOG_DEBUG("DSCR %08x e", (unsigned) arm11->dscr);
@@ -722,7 +724,7 @@ static int arm11_step(struct target *target, int current,
CHECK_RETVAL(arm11_debug_entry(arm11));
/* restore default state */
- arm11->dscr &= ~ARM11_DSCR_INTERRUPTS_DISABLE;
+ arm11->dscr &= ~DSCR_INT_DIS;
}
diff --git a/src/target/arm11.h b/src/target/arm11.h
index b118e1c6..5f78db5d 100644
--- a/src/target/arm11.h
+++ b/src/target/arm11.h
@@ -38,6 +38,7 @@
} \
} while (0)
+/* bits from ARMv7 DIDR */
enum arm11_debug_version
{
ARM11_DEBUG_V6 = 0x01,
@@ -95,8 +96,6 @@ enum arm11_instructions
enum arm11_dscr
{
- ARM11_DSCR_CORE_HALTED = 1 << 0,
- ARM11_DSCR_CORE_RESTARTED = 1 << 1,
ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_MASK = 0x0F << 2,
ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_HALT = 0x00 << 2,
@@ -105,20 +104,6 @@ enum arm11_dscr
ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_BKPT_INSTRUCTION = 0x03 << 2,
ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_EDBGRQ = 0x04 << 2,
ARM11_DSCR_METHOD_OF_DEBUG_ENTRY_VECTOR_CATCH = 0x05 << 2,
-
- ARM11_DSCR_STICKY_PRECISE_DATA_ABORT = 1 << 6,
- ARM11_DSCR_STICKY_IMPRECISE_DATA_ABORT = 1 << 7,
- ARM11_DSCR_INTERRUPTS_DISABLE = 1 << 11,
- ARM11_DSCR_EXECUTE_ARM_INSTRUCTION_ENABLE = 1 << 13,
- ARM11_DSCR_MODE_SELECT = 1 << 14,
- ARM11_DSCR_WDTR_FULL = 1 << 29,
- ARM11_DSCR_RDTR_FULL = 1 << 30,
-};
-
-enum arm11_cpsr
-{
- ARM11_CPSR_T = 1 << 5,
- ARM11_CPSR_J = 1 << 24,
};
enum arm11_sc7
@@ -132,10 +117,4 @@ enum arm11_sc7
ARM11_SC7_WCR0 = 112,
};
-struct arm11_reg_state
-{
- uint32_t def_index;
- struct target * target;
-};
-
#endif /* ARM11_H */
diff --git a/src/target/arm_dpm.h b/src/target/arm_dpm.h
index 1f32e8bc..11213a36 100644
--- a/src/target/arm_dpm.h
+++ b/src/target/arm_dpm.h
@@ -141,6 +141,7 @@ void arm_dpm_report_wfar(struct arm_dpm *, uint32_t wfar);
*/
#define DSCR_CORE_HALTED (1 << 0)
#define DSCR_CORE_RESTARTED (1 << 1)
+#define DSCR_INT_DIS (1 << 11)
#define DSCR_ITR_EN (1 << 13)
#define DSCR_HALT_DBG_MODE (1 << 14)
#define DSCR_MON_DBG_MODE (1 << 15)
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-23 17:00:39 +0000