summaryrefslogtreecommitdiff
path: root/src/target
diff options
context:
space:
mode:
Diffstat (limited to 'src/target')
-rw-r--r--src/target/arm11.c14
-rw-r--r--src/target/arm720t.c4
-rw-r--r--src/target/arm7_9_common.c8
-rw-r--r--src/target/arm920t.c12
-rw-r--r--src/target/arm926ejs.c4
-rw-r--r--src/target/arm966e.c4
-rw-r--r--src/target/arm9tdmi.c4
-rw-r--r--src/target/armv4_5.c8
-rw-r--r--src/target/armv7a.c12
-rw-r--r--src/target/armv7m.c12
-rw-r--r--src/target/cortex_a8.c6
-rw-r--r--src/target/cortex_m3.c8
-rw-r--r--src/target/etb.c4
-rw-r--r--src/target/etm.c24
-rw-r--r--src/target/etm_dummy.c4
-rw-r--r--src/target/oocd_trace.c8
-rw-r--r--src/target/target.c54
-rw-r--r--src/target/target_request.c4
-rw-r--r--src/target/trace.c6
-rw-r--r--src/target/xscale.c28
20 files changed, 114 insertions, 114 deletions
diff --git a/src/target/arm11.c b/src/target/arm11.c
index a5175af7..66954fa7 100644
--- a/src/target/arm11.c
+++ b/src/target/arm11.c
@@ -1571,34 +1571,34 @@ static int arm11_register_commands(struct command_context *cmd_ctx)
armv4_5_register_commands(cmd_ctx);
- top_cmd = register_command(cmd_ctx, NULL, "arm11",
+ top_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "arm11",
NULL, COMMAND_ANY, NULL);
/* "hardware_step" is only here to check if the default
* simulate + breakpoint implementation is broken.
* TEMPORARY! NOT DOCUMENTED!
*/
- register_command(cmd_ctx, top_cmd, "hardware_step",
+ COMMAND_REGISTER(cmd_ctx, top_cmd, "hardware_step",
arm11_handle_bool_hardware_step, COMMAND_ANY,
"DEBUG ONLY - Hardware single stepping"
" (default: disabled)");
- mw_cmd = register_command(cmd_ctx, top_cmd, "memwrite",
+ mw_cmd = COMMAND_REGISTER(cmd_ctx, top_cmd, "memwrite",
NULL, COMMAND_ANY, NULL);
- register_command(cmd_ctx, mw_cmd, "burst",
+ COMMAND_REGISTER(cmd_ctx, mw_cmd, "burst",
arm11_handle_bool_memwrite_burst, COMMAND_ANY,
"Enable/Disable non-standard but fast burst mode"
" (default: enabled)");
- register_command(cmd_ctx, mw_cmd, "error_fatal",
+ COMMAND_REGISTER(cmd_ctx, mw_cmd, "error_fatal",
arm11_handle_bool_memwrite_error_fatal, COMMAND_ANY,
"Terminate program if transfer error was found"
" (default: enabled)");
- register_command(cmd_ctx, top_cmd, "step_irq_enable",
+ COMMAND_REGISTER(cmd_ctx, top_cmd, "step_irq_enable",
arm11_handle_bool_step_irq_enable, COMMAND_ANY,
"Enable interrupts while stepping"
" (default: disabled)");
- register_command(cmd_ctx, top_cmd, "vcr",
+ COMMAND_REGISTER(cmd_ctx, top_cmd, "vcr",
arm11_handle_vcr, COMMAND_ANY,
"Control (Interrupt) Vector Catch Register");
diff --git a/src/target/arm720t.c b/src/target/arm720t.c
index f9388ab6..4ca80e19 100644
--- a/src/target/arm720t.c
+++ b/src/target/arm720t.c
@@ -499,11 +499,11 @@ static int arm720t_register_commands(struct command_context *cmd_ctx)
retval = arm7_9_register_commands(cmd_ctx);
- arm720t_cmd = register_command(cmd_ctx, NULL, "arm720t",
+ arm720t_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "arm720t",
NULL, COMMAND_ANY,
"arm720t specific commands");
- register_command(cmd_ctx, arm720t_cmd, "cp15",
+ COMMAND_REGISTER(cmd_ctx, arm720t_cmd, "cp15",
arm720t_handle_cp15_command, COMMAND_EXEC,
"display/modify cp15 register <opcode> [value]");
diff --git a/src/target/arm7_9_common.c b/src/target/arm7_9_common.c
index 4c5e286c..1601ee17 100644
--- a/src/target/arm7_9_common.c
+++ b/src/target/arm7_9_common.c
@@ -2851,18 +2851,18 @@ int arm7_9_register_commands(struct command_context *cmd_ctx)
{
struct command *arm7_9_cmd;
- arm7_9_cmd = register_command(cmd_ctx, NULL, "arm7_9",
+ arm7_9_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "arm7_9",
NULL, COMMAND_ANY, "arm7/9 specific commands");
- register_command(cmd_ctx, arm7_9_cmd, "dbgrq",
+ COMMAND_REGISTER(cmd_ctx, arm7_9_cmd, "dbgrq",
handle_arm7_9_dbgrq_command, COMMAND_ANY,
"use EmbeddedICE dbgrq instead of breakpoint "
"for target halt requests <enable | disable>");
- register_command(cmd_ctx, arm7_9_cmd, "fast_memory_access",
+ COMMAND_REGISTER(cmd_ctx, arm7_9_cmd, "fast_memory_access",
handle_arm7_9_fast_memory_access_command, COMMAND_ANY,
"use fast memory accesses instead of slower "
"but potentially safer accesses <enable | disable>");
- register_command(cmd_ctx, arm7_9_cmd, "dcc_downloads",
+ COMMAND_REGISTER(cmd_ctx, arm7_9_cmd, "dcc_downloads",
handle_arm7_9_dcc_downloads_command, COMMAND_ANY,
"use DCC downloads for larger memory writes <enable | disable>");
diff --git a/src/target/arm920t.c b/src/target/arm920t.c
index 0610c93c..e9278449 100644
--- a/src/target/arm920t.c
+++ b/src/target/arm920t.c
@@ -1369,24 +1369,24 @@ int arm920t_register_commands(struct command_context *cmd_ctx)
retval = arm9tdmi_register_commands(cmd_ctx);
- arm920t_cmd = register_command(cmd_ctx, NULL, "arm920t",
+ arm920t_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "arm920t",
NULL, COMMAND_ANY,
"arm920t specific commands");
- register_command(cmd_ctx, arm920t_cmd, "cp15",
+ COMMAND_REGISTER(cmd_ctx, arm920t_cmd, "cp15",
arm920t_handle_cp15_command, COMMAND_EXEC,
"display/modify cp15 register <num> [value]");
- register_command(cmd_ctx, arm920t_cmd, "cp15i",
+ COMMAND_REGISTER(cmd_ctx, arm920t_cmd, "cp15i",
arm920t_handle_cp15i_command, COMMAND_EXEC,
"display/modify cp15 (interpreted access) "
"<opcode> [value] [address]");
- register_command(cmd_ctx, arm920t_cmd, "cache_info",
+ COMMAND_REGISTER(cmd_ctx, arm920t_cmd, "cache_info",
arm920t_handle_cache_info_command, COMMAND_EXEC,
"display information about target caches");
- register_command(cmd_ctx, arm920t_cmd, "read_cache",
+ COMMAND_REGISTER(cmd_ctx, arm920t_cmd, "read_cache",
arm920t_handle_read_cache_command, COMMAND_EXEC,
"display I/D cache content");
- register_command(cmd_ctx, arm920t_cmd, "read_mmu",
+ COMMAND_REGISTER(cmd_ctx, arm920t_cmd, "read_mmu",
arm920t_handle_read_mmu_command, COMMAND_EXEC,
"display I/D mmu content");
diff --git a/src/target/arm926ejs.c b/src/target/arm926ejs.c
index 24488c40..030405a5 100644
--- a/src/target/arm926ejs.c
+++ b/src/target/arm926ejs.c
@@ -764,11 +764,11 @@ int arm926ejs_register_commands(struct command_context *cmd_ctx)
retval = arm9tdmi_register_commands(cmd_ctx);
- arm926ejs_cmd = register_command(cmd_ctx, NULL, "arm926ejs",
+ arm926ejs_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "arm926ejs",
NULL, COMMAND_ANY,
"arm926ejs specific commands");
- register_command(cmd_ctx, arm926ejs_cmd, "cache_info",
+ COMMAND_REGISTER(cmd_ctx, arm926ejs_cmd, "cache_info",
arm926ejs_handle_cache_info_command, COMMAND_EXEC,
"display information about target caches");
diff --git a/src/target/arm966e.c b/src/target/arm966e.c
index 93021993..f6178758 100644
--- a/src/target/arm966e.c
+++ b/src/target/arm966e.c
@@ -228,10 +228,10 @@ int arm966e_register_commands(struct command_context *cmd_ctx)
struct command *arm966e_cmd;
retval = arm9tdmi_register_commands(cmd_ctx);
- arm966e_cmd = register_command(cmd_ctx, NULL, "arm966e",
+ arm966e_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "arm966e",
NULL, COMMAND_ANY,
"arm966e specific commands");
- register_command(cmd_ctx, arm966e_cmd, "cp15",
+ COMMAND_REGISTER(cmd_ctx, arm966e_cmd, "cp15",
arm966e_handle_cp15_command, COMMAND_EXEC,
"display/modify cp15 register <num> [value]");
diff --git a/src/target/arm9tdmi.c b/src/target/arm9tdmi.c
index 298b26ae..f9654297 100644
--- a/src/target/arm9tdmi.c
+++ b/src/target/arm9tdmi.c
@@ -914,10 +914,10 @@ int arm9tdmi_register_commands(struct command_context *cmd_ctx)
struct command *arm9tdmi_cmd;
retval = arm7_9_register_commands(cmd_ctx);
- arm9tdmi_cmd = register_command(cmd_ctx, NULL, "arm9",
+ arm9tdmi_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "arm9",
NULL, COMMAND_ANY,
"arm9 specific commands");
- register_command(cmd_ctx, arm9tdmi_cmd, "vector_catch",
+ COMMAND_REGISTER(cmd_ctx, arm9tdmi_cmd, "vector_catch",
handle_arm9tdmi_catch_vectors_command, COMMAND_EXEC,
"arm9 vector_catch [all|none|reset|undef|swi|pabt|dabt|irq|fiq] ...");
diff --git a/src/target/armv4_5.c b/src/target/armv4_5.c
index da5c75a2..ec6d5a0e 100644
--- a/src/target/armv4_5.c
+++ b/src/target/armv4_5.c
@@ -790,17 +790,17 @@ int armv4_5_register_commands(struct command_context *cmd_ctx)
{
struct command *armv4_5_cmd;
- armv4_5_cmd = register_command(cmd_ctx, NULL, "arm",
+ armv4_5_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "arm",
NULL, COMMAND_ANY,
"generic ARM commands");
- register_command(cmd_ctx, armv4_5_cmd, "reg",
+ COMMAND_REGISTER(cmd_ctx, armv4_5_cmd, "reg",
handle_armv4_5_reg_command, COMMAND_EXEC,
"display ARM core registers");
- register_command(cmd_ctx, armv4_5_cmd, "core_state",
+ COMMAND_REGISTER(cmd_ctx, armv4_5_cmd, "core_state",
handle_armv4_5_core_state_command, COMMAND_EXEC,
"display/change ARM core state <arm | thumb>");
- register_command(cmd_ctx, armv4_5_cmd, "disassemble",
+ COMMAND_REGISTER(cmd_ctx, armv4_5_cmd, "disassemble",
handle_armv4_5_disassemble_command, COMMAND_EXEC,
"disassemble instructions "
"<address> [<count> ['thumb']]");
diff --git a/src/target/armv7a.c b/src/target/armv7a.c
index 1d13779c..67638636 100644
--- a/src/target/armv7a.c
+++ b/src/target/armv7a.c
@@ -148,26 +148,26 @@ int armv7a_register_commands(struct command_context *cmd_ctx)
{
struct command *arm_adi_v5_dap_cmd;
- arm_adi_v5_dap_cmd = register_command(cmd_ctx, NULL, "dap",
+ arm_adi_v5_dap_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "dap",
NULL, COMMAND_ANY,
"cortex dap specific commands");
- register_command(cmd_ctx, arm_adi_v5_dap_cmd, "info",
+ COMMAND_REGISTER(cmd_ctx, arm_adi_v5_dap_cmd, "info",
handle_dap_info_command, COMMAND_EXEC,
"dap info for ap [num], "
"default currently selected AP");
- register_command(cmd_ctx, arm_adi_v5_dap_cmd, "apsel",
+ COMMAND_REGISTER(cmd_ctx, arm_adi_v5_dap_cmd, "apsel",
handle_dap_apsel_command, COMMAND_EXEC,
"select a different AP [num] (default 0)");
- register_command(cmd_ctx, arm_adi_v5_dap_cmd, "apid",
+ COMMAND_REGISTER(cmd_ctx, arm_adi_v5_dap_cmd, "apid",
handle_dap_apid_command, COMMAND_EXEC,
"return id reg from AP [num], "
"default currently selected AP");
- register_command(cmd_ctx, arm_adi_v5_dap_cmd, "baseaddr",
+ COMMAND_REGISTER(cmd_ctx, arm_adi_v5_dap_cmd, "baseaddr",
handle_dap_baseaddr_command, COMMAND_EXEC,
"return debug base address from AP [num], "
"default currently selected AP");
- register_command(cmd_ctx, arm_adi_v5_dap_cmd, "memaccess",
+ COMMAND_REGISTER(cmd_ctx, arm_adi_v5_dap_cmd, "memaccess",
handle_dap_memaccess_command, COMMAND_EXEC,
"set/get number of extra tck for mem-ap memory "
"bus access [0-255]");
diff --git a/src/target/armv7m.c b/src/target/armv7m.c
index 88ff6f27..9fd24e9e 100644
--- a/src/target/armv7m.c
+++ b/src/target/armv7m.c
@@ -800,26 +800,26 @@ int armv7m_register_commands(struct command_context *cmd_ctx)
{
struct command *arm_adi_v5_dap_cmd;
- arm_adi_v5_dap_cmd = register_command(cmd_ctx, NULL, "dap",
+ arm_adi_v5_dap_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "dap",
NULL, COMMAND_ANY,
"cortex dap specific commands");
- register_command(cmd_ctx, arm_adi_v5_dap_cmd, "info",
+ COMMAND_REGISTER(cmd_ctx, arm_adi_v5_dap_cmd, "info",
handle_dap_info_command, COMMAND_EXEC,
"Displays dap info for ap [num],"
"default currently selected AP");
- register_command(cmd_ctx, arm_adi_v5_dap_cmd, "apsel",
+ COMMAND_REGISTER(cmd_ctx, arm_adi_v5_dap_cmd, "apsel",
handle_dap_apsel_command, COMMAND_EXEC,
"Select a different AP [num] (default 0)");
- register_command(cmd_ctx, arm_adi_v5_dap_cmd, "apid",
+ COMMAND_REGISTER(cmd_ctx, arm_adi_v5_dap_cmd, "apid",
handle_dap_apid_command, COMMAND_EXEC,
"Displays id reg from AP [num], "
"default currently selected AP");
- register_command(cmd_ctx, arm_adi_v5_dap_cmd, "baseaddr",
+ COMMAND_REGISTER(cmd_ctx, arm_adi_v5_dap_cmd, "baseaddr",
handle_dap_baseaddr_command, COMMAND_EXEC,
"Displays debug base address from AP [num],"
"default currently selected AP");
- register_command(cmd_ctx, arm_adi_v5_dap_cmd, "memaccess",
+ COMMAND_REGISTER(cmd_ctx, arm_adi_v5_dap_cmd, "memaccess",
handle_dap_memaccess_command, COMMAND_EXEC,
"set/get number of extra tck for mem-ap "
"memory bus access [0-255]");
diff --git a/src/target/cortex_a8.c b/src/target/cortex_a8.c
index 08e54601..519ba3f5 100644
--- a/src/target/cortex_a8.c
+++ b/src/target/cortex_a8.c
@@ -1634,15 +1634,15 @@ static int cortex_a8_register_commands(struct command_context *cmd_ctx)
armv4_5_register_commands(cmd_ctx);
armv7a_register_commands(cmd_ctx);
- cortex_a8_cmd = register_command(cmd_ctx, NULL, "cortex_a8",
+ cortex_a8_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "cortex_a8",
NULL, COMMAND_ANY,
"cortex_a8 specific commands");
- register_command(cmd_ctx, cortex_a8_cmd, "cache_info",
+ COMMAND_REGISTER(cmd_ctx, cortex_a8_cmd, "cache_info",
cortex_a8_handle_cache_info_command, COMMAND_EXEC,
"display information about target caches");
- register_command(cmd_ctx, cortex_a8_cmd, "dbginit",
+ COMMAND_REGISTER(cmd_ctx, cortex_a8_cmd, "dbginit",
cortex_a8_handle_dbginit_command, COMMAND_EXEC,
"Initialize core debug");
diff --git a/src/target/cortex_m3.c b/src/target/cortex_m3.c
index 8279a8b9..47052e90 100644
--- a/src/target/cortex_m3.c
+++ b/src/target/cortex_m3.c
@@ -1919,16 +1919,16 @@ static int cortex_m3_register_commands(struct command_context *cmd_ctx)
retval = armv7m_register_commands(cmd_ctx);
- cortex_m3_cmd = register_command(cmd_ctx, NULL, "cortex_m3",
+ cortex_m3_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "cortex_m3",
NULL, COMMAND_ANY, "cortex_m3 specific commands");
- register_command(cmd_ctx, cortex_m3_cmd, "disassemble",
+ COMMAND_REGISTER(cmd_ctx, cortex_m3_cmd, "disassemble",
handle_cortex_m3_disassemble_command, COMMAND_EXEC,
"disassemble Thumb2 instructions <address> [<count>]");
- register_command(cmd_ctx, cortex_m3_cmd, "maskisr",
+ COMMAND_REGISTER(cmd_ctx, cortex_m3_cmd, "maskisr",
handle_cortex_m3_mask_interrupts_command, COMMAND_EXEC,
"mask cortex_m3 interrupts ['on'|'off']");
- register_command(cmd_ctx, cortex_m3_cmd, "vector_catch",
+ COMMAND_REGISTER(cmd_ctx, cortex_m3_cmd, "vector_catch",
handle_cortex_m3_vector_catch_command, COMMAND_EXEC,
"catch hardware vectors ['all'|'none'|<list>]");
diff --git a/src/target/etb.c b/src/target/etb.c
index df04e406..1f44d3a2 100644
--- a/src/target/etb.c
+++ b/src/target/etb.c
@@ -404,10 +404,10 @@ COMMAND_HANDLER(handle_etb_config_command)
static int etb_register_commands(struct command_context *cmd_ctx)
{
- struct command *etb_cmd = register_command(cmd_ctx, NULL, "etb",
+ struct command *etb_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "etb",
NULL, COMMAND_ANY, "Embedded Trace Buffer");
- register_command(cmd_ctx, etb_cmd, "config",
+ COMMAND_REGISTER(cmd_ctx, etb_cmd, "config",
handle_etb_config_command, COMMAND_CONFIG,
NULL);
diff --git a/src/target/etm.c b/src/target/etm.c
index 1678c2fb..6df354a5 100644
--- a/src/target/etm.c
+++ b/src/target/etm.c
@@ -2097,9 +2097,9 @@ COMMAND_HANDLER(handle_etm_analyze_command)
int etm_register_commands(struct command_context *cmd_ctx)
{
- etm_cmd = register_command(cmd_ctx, NULL, "etm", NULL, COMMAND_ANY, "Embedded Trace Macrocell");
+ etm_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "etm", NULL, COMMAND_ANY, "Embedded Trace Macrocell");
- register_command(cmd_ctx, etm_cmd, "config", handle_etm_config_command,
+ COMMAND_REGISTER(cmd_ctx, etm_cmd, "config", handle_etm_config_command,
COMMAND_CONFIG, "etm config <target> <port_width> <port_mode> <clocking> <capture_driver>");
return ERROR_OK;
@@ -2107,32 +2107,32 @@ int etm_register_commands(struct command_context *cmd_ctx)
static int etm_register_user_commands(struct command_context *cmd_ctx)
{
- register_command(cmd_ctx, etm_cmd, "tracemode", handle_etm_tracemode_command,
+ COMMAND_REGISTER(cmd_ctx, etm_cmd, "tracemode", handle_etm_tracemode_command,
COMMAND_EXEC, "configure/display trace mode: "
"<none | data | address | all> "
"<context_id_bits> <cycle_accurate> <branch_output>");
- register_command(cmd_ctx, etm_cmd, "info", handle_etm_info_command,
+ COMMAND_REGISTER(cmd_ctx, etm_cmd, "info", handle_etm_info_command,
COMMAND_EXEC, "display info about the current target's ETM");
- register_command(cmd_ctx, etm_cmd, "trigger_percent", handle_etm_trigger_percent_command,
+ COMMAND_REGISTER(cmd_ctx, etm_cmd, "trigger_percent", handle_etm_trigger_percent_command,
COMMAND_EXEC, "amount (<percent>) of trace buffer to be filled after the trigger occured");
- register_command(cmd_ctx, etm_cmd, "status", handle_etm_status_command,
+ COMMAND_REGISTER(cmd_ctx, etm_cmd, "status", handle_etm_status_command,
COMMAND_EXEC, "display current target's ETM status");
- register_command(cmd_ctx, etm_cmd, "start", handle_etm_start_command,
+ COMMAND_REGISTER(cmd_ctx, etm_cmd, "start", handle_etm_start_command,
COMMAND_EXEC, "start ETM trace collection");
- register_command(cmd_ctx, etm_cmd, "stop", handle_etm_stop_command,
+ COMMAND_REGISTER(cmd_ctx, etm_cmd, "stop", handle_etm_stop_command,
COMMAND_EXEC, "stop ETM trace collection");
- register_command(cmd_ctx, etm_cmd, "analyze", handle_etm_analyze_command,
+ COMMAND_REGISTER(cmd_ctx, etm_cmd, "analyze", handle_etm_analyze_command,
COMMAND_EXEC, "anaylze collected ETM trace");
- register_command(cmd_ctx, etm_cmd, "image", handle_etm_image_command,
+ COMMAND_REGISTER(cmd_ctx, etm_cmd, "image", handle_etm_image_command,
COMMAND_EXEC, "load image from <file> [base address]");
- register_command(cmd_ctx, etm_cmd, "dump", handle_etm_dump_command,
+ COMMAND_REGISTER(cmd_ctx, etm_cmd, "dump", handle_etm_dump_command,
COMMAND_EXEC, "dump captured trace data <file>");
- register_command(cmd_ctx, etm_cmd, "load", handle_etm_load_command,
+ COMMAND_REGISTER(cmd_ctx, etm_cmd, "load", handle_etm_load_command,
COMMAND_EXEC, "load trace data for analysis <file>");
return ERROR_OK;
diff --git a/src/target/etm_dummy.c b/src/target/etm_dummy.c
index 7621414b..2df89435 100644
--- a/src/target/etm_dummy.c
+++ b/src/target/etm_dummy.c
@@ -62,9 +62,9 @@ static int etm_dummy_register_commands(struct command_context *cmd_ctx)
{
struct command *etm_dummy_cmd;
- etm_dummy_cmd = register_command(cmd_ctx, NULL, "etm_dummy", NULL, COMMAND_ANY, "Dummy ETM capture driver");
+ etm_dummy_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "etm_dummy", NULL, COMMAND_ANY, "Dummy ETM capture driver");
- register_command(cmd_ctx, etm_dummy_cmd, "config", handle_etm_dummy_config_command, COMMAND_CONFIG, NULL);
+ COMMAND_REGISTER(cmd_ctx, etm_dummy_cmd, "config", handle_etm_dummy_config_command, COMMAND_CONFIG, NULL);
return ERROR_OK;
}
diff --git a/src/target/oocd_trace.c b/src/target/oocd_trace.c
index 05df2581..596a4d60 100644
--- a/src/target/oocd_trace.c
+++ b/src/target/oocd_trace.c
@@ -411,12 +411,12 @@ int oocd_trace_register_commands(struct command_context *cmd_ctx)
{
struct command *oocd_trace_cmd;
- oocd_trace_cmd = register_command(cmd_ctx, NULL, "oocd_trace", NULL, COMMAND_ANY, "OpenOCD + trace");
+ oocd_trace_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "oocd_trace", NULL, COMMAND_ANY, "OpenOCD + trace");
- register_command(cmd_ctx, oocd_trace_cmd, "config", handle_oocd_trace_config_command, COMMAND_CONFIG, NULL);
+ COMMAND_REGISTER(cmd_ctx, oocd_trace_cmd, "config", handle_oocd_trace_config_command, COMMAND_CONFIG, NULL);
- register_command(cmd_ctx, oocd_trace_cmd, "status", handle_oocd_trace_status_command, COMMAND_EXEC, "display OpenOCD + trace status");
- register_command(cmd_ctx, oocd_trace_cmd, "resync", handle_oocd_trace_resync_command, COMMAND_EXEC, "resync OpenOCD + trace capture clock");
+ COMMAND_REGISTER(cmd_ctx, oocd_trace_cmd, "status", handle_oocd_trace_status_command, COMMAND_EXEC, "display OpenOCD + trace status");
+ COMMAND_REGISTER(cmd_ctx, oocd_trace_cmd, "resync", handle_oocd_trace_resync_command, COMMAND_EXEC, "resync OpenOCD + trace capture clock");
return ERROR_OK;
}
diff --git a/src/target/target.c b/src/target/target.c
index 55adcce6..2e933820 100644
--- a/src/target/target.c
+++ b/src/target/target.c
@@ -4765,7 +4765,7 @@ static int jim_mcrmrc(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
int target_register_commands(struct command_context *cmd_ctx)
{
- register_command(cmd_ctx, NULL, "targets",
+ COMMAND_REGISTER(cmd_ctx, NULL, "targets",
handle_targets_command, COMMAND_EXEC,
"change current command line target (one parameter) "
"or list targets (no parameters)");
@@ -4784,7 +4784,7 @@ int target_register_user_commands(struct command_context *cmd_ctx)
if ((retval = trace_register_commands(cmd_ctx)) != ERROR_OK)
return retval;
- register_command(cmd_ctx, NULL, "profile",
+ COMMAND_REGISTER(cmd_ctx, NULL, "profile",
handle_profile_command, COMMAND_EXEC,
"profiling samples the CPU PC");
@@ -4796,94 +4796,94 @@ int target_register_user_commands(struct command_context *cmd_ctx)
"convert a TCL array to memory locations and write the values "
"<ARRAYNAME> <WIDTH = 32/16/8> <ADDRESS> <COUNT>");
- register_command(cmd_ctx, NULL, "fast_load_image",
+ COMMAND_REGISTER(cmd_ctx, NULL, "fast_load_image",
handle_fast_load_image_command, COMMAND_ANY,
"same CMD_ARGV as load_image, image stored in memory "
"- mainly for profiling purposes");
- register_command(cmd_ctx, NULL, "fast_load",
+ COMMAND_REGISTER(cmd_ctx, NULL, "fast_load",
handle_fast_load_command, COMMAND_ANY,
"loads active fast load image to current target "
"- mainly for profiling purposes");
/** @todo don't register virt2phys() unless target supports it */
- register_command(cmd_ctx, NULL, "virt2phys",
+ COMMAND_REGISTER(cmd_ctx, NULL, "virt2phys",
handle_virt2phys_command, COMMAND_ANY,
"translate a virtual address into a physical address");
- register_command(cmd_ctx, NULL, "reg",
+ COMMAND_REGISTER(cmd_ctx, NULL, "reg",
handle_reg_command, COMMAND_EXEC,
"display or set a register");
- register_command(cmd_ctx, NULL, "poll",
+ COMMAND_REGISTER(cmd_ctx, NULL, "poll",
handle_poll_command, COMMAND_EXEC,
"poll target state");
- register_command(cmd_ctx, NULL, "wait_halt",
+ COMMAND_REGISTER(cmd_ctx, NULL, "wait_halt",
handle_wait_halt_command, COMMAND_EXEC,
"wait for target halt [time (s)]");
- register_command(cmd_ctx, NULL, "halt",
+ COMMAND_REGISTER(cmd_ctx, NULL, "halt",
handle_halt_command, COMMAND_EXEC,
"halt target");
- register_command(cmd_ctx, NULL, "resume",
+ COMMAND_REGISTER(cmd_ctx, NULL, "resume",
handle_resume_command, COMMAND_EXEC,
"resume target [addr]");
- register_command(cmd_ctx, NULL, "reset",
+ COMMAND_REGISTER(cmd_ctx, NULL, "reset",
handle_reset_command, COMMAND_EXEC,
"reset target [run | halt | init] - default is run");
- register_command(cmd_ctx, NULL, "soft_reset_halt",
+ COMMAND_REGISTER(cmd_ctx, NULL, "soft_reset_halt",
handle_soft_reset_halt_command, COMMAND_EXEC,
"halt the target and do a soft reset");
- register_command(cmd_ctx, NULL, "step",
+ COMMAND_REGISTER(cmd_ctx, NULL, "step",
handle_step_command, COMMAND_EXEC,
"step one instruction from current PC or [addr]");
- register_command(cmd_ctx, NULL, "mdw",
+ COMMAND_REGISTER(cmd_ctx, NULL, "mdw",
handle_md_command, COMMAND_EXEC,
"display memory words [phys] <addr> [count]");
- register_command(cmd_ctx, NULL, "mdh",
+ COMMAND_REGISTER(cmd_ctx, NULL, "mdh",
handle_md_command, COMMAND_EXEC,
"display memory half-words [phys] <addr> [count]");
- register_command(cmd_ctx, NULL, "mdb",
+ COMMAND_REGISTER(cmd_ctx, NULL, "mdb",
handle_md_command, COMMAND_EXEC,
"display memory bytes [phys] <addr> [count]");
- register_command(cmd_ctx, NULL, "mww",
+ COMMAND_REGISTER(cmd_ctx, NULL, "mww",
handle_mw_command, COMMAND_EXEC,
"write memory word [phys] <addr> <value> [count]");
- register_command(cmd_ctx, NULL, "mwh",
+ COMMAND_REGISTER(cmd_ctx, NULL, "mwh",
handle_mw_command, COMMAND_EXEC,
"write memory half-word [phys] <addr> <value> [count]");
- register_command(cmd_ctx, NULL, "mwb",
+ COMMAND_REGISTER(cmd_ctx, NULL, "mwb",
handle_mw_command, COMMAND_EXEC,
"write memory byte [phys] <addr> <value> [count]");
- register_command(cmd_ctx, NULL, "bp",
+ COMMAND_REGISTER(cmd_ctx, NULL, "bp",
handle_bp_command, COMMAND_EXEC,
"list or set breakpoint [<address> <length> [hw]]");
- register_command(cmd_ctx, NULL, "rbp",
+ COMMAND_REGISTER(cmd_ctx, NULL, "rbp",
handle_rbp_command, COMMAND_EXEC,
"remove breakpoint <address>");
- register_command(cmd_ctx, NULL, "wp",
+ COMMAND_REGISTER(cmd_ctx, NULL, "wp",
handle_wp_command, COMMAND_EXEC,
"list or set watchpoint "
"[<address> <length> <r/w/a> [value] [mask]]");
- register_command(cmd_ctx, NULL, "rwp",
+ COMMAND_REGISTER(cmd_ctx, NULL, "rwp",
handle_rwp_command, COMMAND_EXEC,
"remove watchpoint <address>");
- register_command(cmd_ctx, NULL, "load_image",
+ COMMAND_REGISTER(cmd_ctx, NULL, "load_image",
handle_load_image_command, COMMAND_EXEC,
"load_image <file> <address> "
"['bin'|'ihex'|'elf'|'s19'] [min_address] [max_length]");
- register_command(cmd_ctx, NULL, "dump_image",
+ COMMAND_REGISTER(cmd_ctx, NULL, "dump_image",
handle_dump_image_command, COMMAND_EXEC,
"dump_image <file> <address> <size>");
- register_command(cmd_ctx, NULL, "verify_image",
+ COMMAND_REGISTER(cmd_ctx, NULL, "verify_image",
handle_verify_image_command, COMMAND_EXEC,
"verify_image <file> [offset] [type]");
- register_command(cmd_ctx, NULL, "test_image",
+ COMMAND_REGISTER(cmd_ctx, NULL, "test_image",
handle_test_image_command, COMMAND_EXEC,
"test_image <file> [offset] [type]");
diff --git a/src/target/target_request.c b/src/target/target_request.c
index 583f4c00..a02e2c12 100644
--- a/src/target/target_request.c
+++ b/src/target/target_request.c
@@ -303,9 +303,9 @@ COMMAND_HANDLER(handle_target_request_debugmsgs_command)
int target_request_register_commands(struct command_context *cmd_ctx)
{
target_request_cmd =
- register_command(cmd_ctx, NULL, "target_request", NULL, COMMAND_ANY, "target_request commands");
+ COMMAND_REGISTER(cmd_ctx, NULL, "target_request", NULL, COMMAND_ANY, "target_request commands");
- register_command(cmd_ctx, target_request_cmd, "debugmsgs", handle_target_request_debugmsgs_command,
+ COMMAND_REGISTER(cmd_ctx, target_request_cmd, "debugmsgs", handle_target_request_debugmsgs_command,
COMMAND_EXEC, "enable/disable reception of debug messages from target");
return ERROR_OK;
diff --git a/src/target/trace.c b/src/target/trace.c
index c038a152..c3897a07 100644
--- a/src/target/trace.c
+++ b/src/target/trace.c
@@ -159,12 +159,12 @@ COMMAND_HANDLER(handle_trace_history_command)
int trace_register_commands(struct command_context *cmd_ctx)
{
struct command *trace_cmd =
- register_command(cmd_ctx, NULL, "trace", NULL, COMMAND_ANY, "trace commands");
+ COMMAND_REGISTER(cmd_ctx, NULL, "trace", NULL, COMMAND_ANY, "trace commands");
- register_command(cmd_ctx, trace_cmd, "history", handle_trace_history_command,
+ COMMAND_REGISTER(cmd_ctx, trace_cmd, "history", handle_trace_history_command,
COMMAND_EXEC, "display trace history, ['clear'] history or set [size]");
- register_command(cmd_ctx, trace_cmd, "point", handle_trace_point_command,
+ COMMAND_REGISTER(cmd_ctx, trace_cmd, "point", handle_trace_point_command,
COMMAND_EXEC, "display trace points, ['clear'] list of trace points, or add new tracepoint at [address]");
return ERROR_OK;
diff --git a/src/target/xscale.c b/src/target/xscale.c
index e471ac3b..c2b34931 100644
--- a/src/target/xscale.c
+++ b/src/target/xscale.c
@@ -3558,27 +3558,27 @@ static int xscale_register_commands(struct command_context *cmd_ctx)
{
struct command *xscale_cmd;
- xscale_cmd = register_command(cmd_ctx, NULL, "xscale", NULL, COMMAND_ANY, "xscale specific commands");
+ xscale_cmd = COMMAND_REGISTER(cmd_ctx, NULL, "xscale", NULL, COMMAND_ANY, "xscale specific commands");
- register_command(cmd_ctx, xscale_cmd, "debug_handler", xscale_handle_debug_handler_command, COMMAND_ANY, "'xscale debug_handler <target#> <address>' command takes two required operands");
- register_command(cmd_ctx, xscale_cmd, "cache_clean_address", xscale_handle_cache_clean_address_command, COMMAND_ANY, NULL);
+ COMMAND_REGISTER(cmd_ctx, xscale_cmd, "debug_handler", xscale_handle_debug_handler_command, COMMAND_ANY, "'xscale debug_handler <target#> <address>' command takes two required operands");
+ COMMAND_REGISTER(cmd_ctx, xscale_cmd, "cache_clean_address", xscale_handle_cache_clean_address_command, COMMAND_ANY, NULL);
- register_command(cmd_ctx, xscale_cmd, "cache_info", xscale_handle_cache_info_command, COMMAND_EXEC, NULL);
- register_command(cmd_ctx, xscale_cmd, "mmu", xscale_handle_mmu_command, COMMAND_EXEC, "['enable'|'disable'] the MMU");
- register_command(cmd_ctx, xscale_cmd, "icache", xscale_handle_idcache_command, COMMAND_EXEC, "['enable'|'disable'] the ICache");
- register_command(cmd_ctx, xscale_cmd, "dcache", xscale_handle_idcache_command, COMMAND_EXEC, "['enable'|'disable'] the DCache");
+ COMMAND_REGISTER(cmd_ctx, xscale_cmd, "cache_info", xscale_handle_cache_info_command, COMMAND_EXEC, NULL);
+ COMMAND_REGISTER(cmd_ctx, xscale_cmd, "mmu", xscale_handle_mmu_command, COMMAND_EXEC, "['enable'|'disable'] the MMU");
+ COMMAND_REGISTER(cmd_ctx, xscale_cmd, "icache", xscale_handle_idcache_command, COMMAND_EXEC, "['enable'|'disable'] the ICache");
+ COMMAND_REGISTER(cmd_ctx, xscale_cmd, "dcache", xscale_handle_idcache_command, COMMAND_EXEC, "['enable'|'disable'] the DCache");
- register_command(cmd_ctx, xscale_cmd, "vector_catch", xscale_handle_vector_catch_command, COMMAND_EXEC, "<mask> of vectors that should be catched");
- register_command(cmd_ctx, xscale_cmd, "vector_table", xscale_handle_vector_table_command, COMMAND_EXEC, "<high|low> <index> <code> set static code for exception handler entry");
+ COMMAND_REGISTER(cmd_ctx, xscale_cmd, "vector_catch", xscale_handle_vector_catch_command, COMMAND_EXEC, "<mask> of vectors that should be catched");
+ COMMAND_REGISTER(cmd_ctx, xscale_cmd, "vector_table", xscale_handle_vector_table_command, COMMAND_EXEC, "<high|low> <index> <code> set static code for exception handler entry");
- register_command(cmd_ctx, xscale_cmd, "trace_buffer", xscale_handle_trace_buffer_command, COMMAND_EXEC, "<enable | disable> ['fill' [n]|'wrap']");
+ COMMAND_REGISTER(cmd_ctx, xscale_cmd, "trace_buffer", xscale_handle_trace_buffer_command, COMMAND_EXEC, "<enable | disable> ['fill' [n]|'wrap']");
- register_command(cmd_ctx, xscale_cmd, "dump_trace", xscale_handle_dump_trace_command, COMMAND_EXEC, "dump content of trace buffer to <file>");
- register_command(cmd_ctx, xscale_cmd, "analyze_trace", xscale_handle_analyze_trace_buffer_command, COMMAND_EXEC, "analyze content of trace buffer");
- register_command(cmd_ctx, xscale_cmd, "trace_image", xscale_handle_trace_image_command,
+ COMMAND_REGISTER(cmd_ctx, xscale_cmd, "dump_trace", xscale_handle_dump_trace_command, COMMAND_EXEC, "dump content of trace buffer to <file>");
+ COMMAND_REGISTER(cmd_ctx, xscale_cmd, "analyze_trace", xscale_handle_analyze_trace_buffer_command, COMMAND_EXEC, "analyze content of trace buffer");
+ COMMAND_REGISTER(cmd_ctx, xscale_cmd, "trace_image", xscale_handle_trace_image_command,
COMMAND_EXEC, "load image from <file> [base address]");
- register_command(cmd_ctx, xscale_cmd, "cp15", xscale_handle_cp15, COMMAND_EXEC, "access coproc 15 <register> [value]");
+ COMMAND_REGISTER(cmd_ctx, xscale_cmd, "cp15", xscale_handle_cp15, COMMAND_EXEC, "access coproc 15 <register> [value]");
armv4_5_register_commands(cmd_ctx);
generated by cgit v1.2.3 (git 2.46.0) at 2025-01-04 02:41:58 +0000