diff options
Diffstat (limited to 'src/tcl/board/hitex_stm32-performancestick.cfg')
| -rw-r--r-- | src/tcl/board/hitex_stm32-performancestick.cfg | 50 |
1 files changed, 50 insertions, 0 deletions
diff --git a/src/tcl/board/hitex_stm32-performancestick.cfg b/src/tcl/board/hitex_stm32-performancestick.cfg new file mode 100644 index 00000000..5effbd96 --- /dev/null +++ b/src/tcl/board/hitex_stm32-performancestick.cfg @@ -0,0 +1,50 @@ +# Hitex stm32 performance stick + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME stm32_hitex +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +# set jtag speed +jtag_khz 500 + +jtag_nsrst_delay 100 +jtag_ntrst_delay 100 + +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config trst_and_srst + +#jtag scan chain +# The CPU +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # See STM Document RM0008 + # Section 26.6.3 + set _CPUTAPID 0x3ba00477 +} +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +# The boundery scan register, leave the "expected-id" undefined. +jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 + +# configure str750 connected to jtag chain +jtag newtap $_CHIPNAME unknown -irlen 4 -ircapture 0x1 -irmask 0x0f + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME + +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0 + +# +flash bank stm32x 0 0 0 0 0 + +# For more information about the configuration files, take a look at: +# openocd.texi |