1 files changed, 51 insertions, 0 deletions
diff --git a/src/tcl/target/at91rm9200.cfg b/src/tcl/target/at91rm9200.cfg
new file mode 100644
index 00000000..58c7318e
--- /dev/null
+++ b/src/tcl/target/at91rm9200.cfg
@@ -0,0 +1,51 @@
+
+reset_config trst_and_srst
+
+if { [info exists CHIPNAME] } {	
+   set  _CHIPNAME $CHIPNAME    
+} else {	 
+   set  _CHIPNAME at91rm9200
+}
+
+if { [info exists ENDIAN] } {	
+   set  _ENDIAN $ENDIAN    
+} else {	 
+   set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+   set _CPUTAPID 0x05b0203f
+}
+
+# Never allow the following!
+if { $_CPUTAPID == 0x15b0203f } {
+   puts "-------------------------------------------------------"
+   puts "- ERROR:                                              -"
+   puts "- ERROR: TapID 0x15b0203f is wrong for at91rm9200      -"
+   puts "- ERROR: The chip/board has a JTAG select pin/jumper  -"
+   puts "- ERROR:                                              -"
+   puts "- ERROR: In one position (0x05b0203f) it selects the   -"
+   puts "- ERROR: ARM CPU, in the other position (0x1b0203f)   -"
+   puts "- ERROR: it selects boundry-scan not the ARM          -"
+   puts "- ERROR:                                              -"
+   puts "-------------------------------------------------------"
+}
+
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+
+# Create the GDB Target.
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME 
+# AT91RM9200 has a 16K block of sram @ 0x0020.0000
+$_TARGETNAME configure -work-area-virt 0x00200000 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 1
+
+# This chip has a DCC ... use it
+arm7_9 dcc_downloads enable
+
+
+
+
+