diff options
Diffstat (limited to 'tcl')
51 files changed, 54 insertions, 54 deletions
diff --git a/tcl/board/at91sam9g20-ek.cfg b/tcl/board/at91sam9g20-ek.cfg index f24f1a13..c3eb952c 100644 --- a/tcl/board/at91sam9g20-ek.cfg +++ b/tcl/board/at91sam9g20-ek.cfg @@ -32,7 +32,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP # affected by the board and type of JTAG adapter. A value of 200 ms seems # to work reliably for the configuration listed in the file header above. -jtag_nsrst_delay 200 +adapter_nsrst_delay 200 jtag_ntrst_delay 200 # Set fallback clock to 1/6 of worst-case clock speed (which would be the 32.768 kHz slow clock). diff --git a/tcl/board/crossbow_tech_imote2.cfg b/tcl/board/crossbow_tech_imote2.cfg index 88d4aa72..002b5372 100644 --- a/tcl/board/crossbow_tech_imote2.cfg +++ b/tcl/board/crossbow_tech_imote2.cfg @@ -4,7 +4,7 @@ set CHIPNAME imote2 source [find target/pxa270.cfg] # longer-than-normal reset delay -jtag_nsrst_delay 800 +adapter_nsrst_delay 800 reset_config trst_and_srst separate diff --git a/tcl/board/csb732.cfg b/tcl/board/csb732.cfg index cad38e2e..4d6f0e48 100644 --- a/tcl/board/csb732.cfg +++ b/tcl/board/csb732.cfg @@ -3,7 +3,7 @@ source [find target/imx35.cfg] # Determined by trial and error reset_config trst_and_srst combined -jtag_nsrst_delay 200 +adapter_nsrst_delay 200 jtag_ntrst_delay 200 $_TARGETNAME configure -event gdb-attach { reset init } diff --git a/tcl/board/digi_connectcore_wi-9c.cfg b/tcl/board/digi_connectcore_wi-9c.cfg index 2d823766..ad40d537 100644 --- a/tcl/board/digi_connectcore_wi-9c.cfg +++ b/tcl/board/digi_connectcore_wi-9c.cfg @@ -36,7 +36,7 @@ if { [info exists CPUTAPID ] } { set _TARGETNAME $_CHIPNAME.cpu jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID -jtag_nsrst_delay 200 +adapter_nsrst_delay 200 jtag_ntrst_delay 0 diff --git a/tcl/board/ek-lm3s1968.cfg b/tcl/board/ek-lm3s1968.cfg index 6ce7f7fa..28066f3f 100644 --- a/tcl/board/ek-lm3s1968.cfg +++ b/tcl/board/ek-lm3s1968.cfg @@ -16,7 +16,7 @@ source [find target/lm3s1968.cfg] # jtag speed adapter_khz 3000 -jtag_nsrst_delay 100 +adapter_nsrst_delay 100 #LM3S1968 Evaluation Board has only srst reset_config srst_only diff --git a/tcl/board/ek-lm3s811.cfg b/tcl/board/ek-lm3s811.cfg index 078cae1f..7d3f2ce3 100644 --- a/tcl/board/ek-lm3s811.cfg +++ b/tcl/board/ek-lm3s811.cfg @@ -12,7 +12,7 @@ source [find target/lm3s811.cfg] # jtag speed adapter_khz 500 -jtag_nsrst_delay 100 +adapter_nsrst_delay 100 #LM3S811 Evaluation Board has only srst reset_config srst_only diff --git a/tcl/board/ek-lm3s9b9x.cfg b/tcl/board/ek-lm3s9b9x.cfg index b8be88b8..fb6272af 100644 --- a/tcl/board/ek-lm3s9b9x.cfg +++ b/tcl/board/ek-lm3s9b9x.cfg @@ -11,7 +11,7 @@ source [find target/lm3s9b9x.cfg] # jtag speed adapter_khz 500 -jtag_nsrst_delay 100 +adapter_nsrst_delay 100 #LM3S9B9x Evaluation Board has only srst reset_config srst_only diff --git a/tcl/board/ethernut3.cfg b/tcl/board/ethernut3.cfg index 359cb0bf..34e9b72d 100644 --- a/tcl/board/ethernut3.cfg +++ b/tcl/board/ethernut3.cfg @@ -20,7 +20,7 @@ flash bank $_FLASHNAME cfi 0x10000000 0x400000 2 2 $_TARGETNAME # Micrel MIC2775-29YM5 Supervisor # Reset output will remain active for 280ms (maximum) # -jtag_nsrst_delay 300 +adapter_nsrst_delay 300 jtag_ntrst_delay 300 diff --git a/tcl/board/hitex_lpc2929.cfg b/tcl/board/hitex_lpc2929.cfg index 35cc7d0b..d9ca1109 100644 --- a/tcl/board/hitex_lpc2929.cfg +++ b/tcl/board/hitex_lpc2929.cfg @@ -2,7 +2,7 @@ # http://www.hitex.com/ # Delays on reset lines -jtag_nsrst_delay 50 +adapter_nsrst_delay 50 jtag_ntrst_delay 1 # Maximum of 1/8 of clock frequency (XTAL = 16 MHz). diff --git a/tcl/board/hitex_str9-comstick.cfg b/tcl/board/hitex_str9-comstick.cfg index ade24f62..4d1bb2e4 100644 --- a/tcl/board/hitex_str9-comstick.cfg +++ b/tcl/board/hitex_str9-comstick.cfg @@ -7,7 +7,7 @@ source [find interface/hitex_str9-comstick.cfg] # set jtag speed adapter_khz 3000 -jtag_nsrst_delay 100 +adapter_nsrst_delay 100 jtag_ntrst_delay 100 #use combined on interfaces or targets that can't set TRST/SRST separately reset_config trst_and_srst diff --git a/tcl/board/lubbock.cfg b/tcl/board/lubbock.cfg index 32af386e..095c60aa 100644 --- a/tcl/board/lubbock.cfg +++ b/tcl/board/lubbock.cfg @@ -4,7 +4,7 @@ source [find target/pxa255.cfg] -jtag_nsrst_delay 250 +adapter_nsrst_delay 250 jtag_ntrst_delay 250 # NOTE: until after pinmux and such are set up, only CS0 is diff --git a/tcl/board/mini2440.cfg b/tcl/board/mini2440.cfg index b053c225..16889654 100644 --- a/tcl/board/mini2440.cfg +++ b/tcl/board/mini2440.cfg @@ -112,7 +112,7 @@ target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 1 #reset configuration -jtag_nsrst_delay 100 +adapter_nsrst_delay 100 jtag_ntrst_delay 100 reset_config trst_and_srst @@ -141,7 +141,7 @@ reset_config trst_and_srst nand device s3c2440 0 - jtag_nsrst_delay 100 + adapter_nsrst_delay 100 jtag_ntrst_delay 100 reset_config trst_and_srst init diff --git a/tcl/board/phytec_lpc3250.cfg b/tcl/board/phytec_lpc3250.cfg index 51622ef1..6a7e8e92 100644 --- a/tcl/board/phytec_lpc3250.cfg +++ b/tcl/board/phytec_lpc3250.cfg @@ -1,6 +1,6 @@ source [find target/lpc3250.cfg] -jtag_nsrst_delay 200 +adapter_nsrst_delay 200 jtag_ntrst_delay 1 adapter_khz 200 reset_config trst_and_srst separate diff --git a/tcl/board/pxa255_sst.cfg b/tcl/board/pxa255_sst.cfg index ce903871..44f34ca1 100644 --- a/tcl/board/pxa255_sst.cfg +++ b/tcl/board/pxa255_sst.cfg @@ -93,7 +93,7 @@ $_TARGETNAME configure -event reset-init {pxa255_sst_init} reset_config trst_and_srst -jtag_nsrst_delay 200 +adapter_nsrst_delay 200 jtag_ntrst_delay 200 #xscale debug_handler 0 0xFFFF0800 # debug handler base address diff --git a/tcl/board/telo.cfg b/tcl/board/telo.cfg index cb4bc2a3..80040b14 100644 --- a/tcl/board/telo.cfg +++ b/tcl/board/telo.cfg @@ -16,7 +16,7 @@ source [find target/c100helper.tcl] jtag_nsrst_assert_width 100 jtag_ntrst_assert_width 100 # don't talk to JTAG after reset for: [ms] -jtag_nsrst_delay 100 +adapter_nsrst_delay 100 jtag_ntrst_delay 100 reset_config trst_and_srst separate diff --git a/tcl/interface/calao-usb-a9260.cfg b/tcl/interface/calao-usb-a9260.cfg index a9d7dec4..5fae2f3b 100644 --- a/tcl/interface/calao-usb-a9260.cfg +++ b/tcl/interface/calao-usb-a9260.cfg @@ -6,6 +6,6 @@ # See calao-usb-a9260-c01.cfg and calao-usb-a9260-c02.cfg. # -jtag_nsrst_delay 200 +adapter_nsrst_delay 200 jtag_ntrst_delay 200 diff --git a/tcl/target/aduc702x.cfg b/tcl/target/aduc702x.cfg index 50b2a0de..d58b723a 100644 --- a/tcl/target/aduc702x.cfg +++ b/tcl/target/aduc702x.cfg @@ -17,7 +17,7 @@ if { [info exists CPUTAPID] } { set _CPUTAPID 0x3f0f0f0f } -jtag_nsrst_delay 200 +adapter_nsrst_delay 200 jtag_ntrst_delay 200 ## JTAG scan chain diff --git a/tcl/target/ar71xx.cfg b/tcl/target/ar71xx.cfg index 20383315..126efe4d 100644 --- a/tcl/target/ar71xx.cfg +++ b/tcl/target/ar71xx.cfg @@ -1,7 +1,7 @@ # Atheros AR71xx MIPS 24Kc SoC. # tested on PB44 refererence board -jtag_nsrst_delay 100 +adapter_nsrst_delay 100 jtag_ntrst_delay 100 reset_config trst_and_srst diff --git a/tcl/target/at91sam9260.cfg b/tcl/target/at91sam9260.cfg index df08d10d..86258c62 100644 --- a/tcl/target/at91sam9260.cfg +++ b/tcl/target/at91sam9260.cfg @@ -26,7 +26,7 @@ reset_config trst_and_srst separate trst_push_pull srst_open_drain # jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID -jtag_nsrst_delay 300 +adapter_nsrst_delay 300 jtag_ntrst_delay 200 jtag_rclk 3 diff --git a/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg b/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg index 03595404..034a3489 100644 --- a/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg +++ b/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg @@ -30,7 +30,7 @@ if { [info exists CPUTAPID ] } { reset_config trst_and_srst -jtag_nsrst_delay 200 +adapter_nsrst_delay 200 jtag_ntrst_delay 200 diff --git a/tcl/target/at91sam9rl.cfg b/tcl/target/at91sam9rl.cfg index 6db18261..5ee5c49e 100644 --- a/tcl/target/at91sam9rl.cfg +++ b/tcl/target/at91sam9rl.cfg @@ -26,7 +26,7 @@ reset_config trst_and_srst separate trst_push_pull srst_open_drain # jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID -jtag_nsrst_delay 300 +adapter_nsrst_delay 300 jtag_ntrst_delay 200 jtag_rclk 3 diff --git a/tcl/target/dragonite.cfg b/tcl/target/dragonite.cfg index d2e7e328..7e85624c 100644 --- a/tcl/target/dragonite.cfg +++ b/tcl/target/dragonite.cfg @@ -26,6 +26,6 @@ set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME dragonite -endian $_ENDIAN -chain-position $_TARGETNAME reset_config trst_and_srst -jtag_nsrst_delay 200 +adapter_nsrst_delay 200 jtag_ntrst_delay 200 diff --git a/tcl/target/epc9301.cfg b/tcl/target/epc9301.cfg index 7e4599da..d2dc7ecb 100644 --- a/tcl/target/epc9301.cfg +++ b/tcl/target/epc9301.cfg @@ -20,7 +20,7 @@ if { [info exists CPUTAPID ] } { } jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID -jtag_nsrst_delay 100 +adapter_nsrst_delay 100 jtag_ntrst_delay 100 set _TARGETNAME $_CHIPNAME.cpu diff --git a/tcl/target/feroceon.cfg b/tcl/target/feroceon.cfg index b7077706..e90165b4 100644 --- a/tcl/target/feroceon.cfg +++ b/tcl/target/feroceon.cfg @@ -26,6 +26,6 @@ set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME feroceon -endian $_ENDIAN -chain-position $_TARGETNAME reset_config trst_and_srst -jtag_nsrst_delay 200 +adapter_nsrst_delay 200 jtag_ntrst_delay 200 diff --git a/tcl/target/imx31.cfg b/tcl/target/imx31.cfg index 46b4f94e..3af6383c 100644 --- a/tcl/target/imx31.cfg +++ b/tcl/target/imx31.cfg @@ -3,7 +3,7 @@ reset_config trst_and_srst srst_gates_jtag -jtag_nsrst_delay 5 +adapter_nsrst_delay 5 if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME diff --git a/tcl/target/lm3s6965.cfg b/tcl/target/lm3s6965.cfg index c6e623ee..137cba9d 100644 --- a/tcl/target/lm3s6965.cfg +++ b/tcl/target/lm3s6965.cfg @@ -15,7 +15,7 @@ if { [info exists CPUTAPID ] } { # jtag speed adapter_khz 500 -jtag_nsrst_delay 100 +adapter_nsrst_delay 100 jtag_ntrst_delay 100 #LM3S6965 Evaluation Board has only srst diff --git a/tcl/target/lpc1768.cfg b/tcl/target/lpc1768.cfg index 182fb89d..82a097f4 100644 --- a/tcl/target/lpc1768.cfg +++ b/tcl/target/lpc1768.cfg @@ -25,7 +25,7 @@ if { [info exists CPUTAPID ] } { } #delays on reset lines -jtag_nsrst_delay 200 +adapter_nsrst_delay 200 jtag_ntrst_delay 200 # LPC2000 & LPC1700 -> SRST causes TRST diff --git a/tcl/target/lpc2103.cfg b/tcl/target/lpc2103.cfg index 13535f59..2ebe91ae 100644 --- a/tcl/target/lpc2103.cfg +++ b/tcl/target/lpc2103.cfg @@ -22,7 +22,7 @@ if { [info exists CPUTAPID ] } { reset_config trst_and_srst srst_pulls_trst # reset delays -jtag_nsrst_delay 100 +adapter_nsrst_delay 100 jtag_ntrst_delay 100 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID diff --git a/tcl/target/lpc2124.cfg b/tcl/target/lpc2124.cfg index ce55952a..1b60c155 100644 --- a/tcl/target/lpc2124.cfg +++ b/tcl/target/lpc2124.cfg @@ -24,7 +24,7 @@ if { [info exists CPUTAPID ] } { reset_config trst_and_srst srst_pulls_trst # reset delays -jtag_nsrst_delay 100 +adapter_nsrst_delay 100 jtag_ntrst_delay 100 adapter_khz 1000 diff --git a/tcl/target/lpc2129.cfg b/tcl/target/lpc2129.cfg index 287fa5d0..5b2a2f74 100644 --- a/tcl/target/lpc2129.cfg +++ b/tcl/target/lpc2129.cfg @@ -25,7 +25,7 @@ if { [info exists CPUTAPID ] } { reset_config trst_and_srst srst_pulls_trst # reset delays -jtag_nsrst_delay 100 +adapter_nsrst_delay 100 jtag_ntrst_delay 100 #jtag scan chain diff --git a/tcl/target/lpc2148.cfg b/tcl/target/lpc2148.cfg index cf6287c6..502a3550 100644 --- a/tcl/target/lpc2148.cfg +++ b/tcl/target/lpc2148.cfg @@ -21,7 +21,7 @@ if { [info exists CPUTAPID ] } { set _CPUTAPID 0x4f1f0f0f } -jtag_nsrst_delay 200 +adapter_nsrst_delay 200 jtag_ntrst_delay 200 # NOTE!!! LPCs need reset pulled while RTCK is low. 0 to activate diff --git a/tcl/target/lpc2294.cfg b/tcl/target/lpc2294.cfg index d43d740b..9ac3c6c1 100644 --- a/tcl/target/lpc2294.cfg +++ b/tcl/target/lpc2294.cfg @@ -17,7 +17,7 @@ if { [info exists CPUTAPID ] } { set _CPUTAPID 0xffffffff } -jtag_nsrst_delay 200 +adapter_nsrst_delay 200 jtag_ntrst_delay 200 #use combined on interfaces or targets that can't set TRST/SRST separately diff --git a/tcl/target/lpc2378.cfg b/tcl/target/lpc2378.cfg index 7eb0dabb..1a42e070 100644 --- a/tcl/target/lpc2378.cfg +++ b/tcl/target/lpc2378.cfg @@ -19,7 +19,7 @@ if { [info exists CPUTAPID ] } { } #delays on reset lines -jtag_nsrst_delay 200 +adapter_nsrst_delay 200 jtag_ntrst_delay 200 # LPC2000 -> SRST causes TRST diff --git a/tcl/target/lpc2478.cfg b/tcl/target/lpc2478.cfg index d0bff1ae..950ef63f 100644 --- a/tcl/target/lpc2478.cfg +++ b/tcl/target/lpc2478.cfg @@ -19,7 +19,7 @@ if { [info exists CPUTAPID ] } { } #delays on reset lines -jtag_nsrst_delay 100 +adapter_nsrst_delay 100 jtag_ntrst_delay 100 # LPC2000 -> SRST causes TRST diff --git a/tcl/target/mega128.cfg b/tcl/target/mega128.cfg index 697ec45b..bb7cdeef 100644 --- a/tcl/target/mega128.cfg +++ b/tcl/target/mega128.cfg @@ -7,7 +7,7 @@ adapter_khz 4500 reset_config srst_only -jtag_nsrst_delay 100 +adapter_nsrst_delay 100 #jtag scan chain if { [info exists CPUTAPID ] } { diff --git a/tcl/target/netx500.cfg b/tcl/target/netx500.cfg index 90315afd..04a267ba 100644 --- a/tcl/target/netx500.cfg +++ b/tcl/target/netx500.cfg @@ -20,7 +20,7 @@ if { [info exists CPUTAPID ] } { # FIXME most reset config belongs in board code reset_config trst_and_srst -jtag_nsrst_delay 100 +adapter_nsrst_delay 100 jtag_ntrst_delay 100 # jtag scan chain diff --git a/tcl/target/omap5912.cfg b/tcl/target/omap5912.cfg index d825df7f..ed64f523 100644 --- a/tcl/target/omap5912.cfg +++ b/tcl/target/omap5912.cfg @@ -14,7 +14,7 @@ if { [info exists CPUTAPID ] } { set _CPUTAPID 0x0692602f } -jtag_nsrst_delay 100 +adapter_nsrst_delay 100 # NOTE: presumes irlen 38 is the C55x DSP, matching BSDL for # its standalone siblings (like TMS320VC5502) of the same era diff --git a/tcl/target/pic32mx.cfg b/tcl/target/pic32mx.cfg index d77c3a8c..8c9a93d3 100644 --- a/tcl/target/pic32mx.cfg +++ b/tcl/target/pic32mx.cfg @@ -26,7 +26,7 @@ if { [info exists WORKAREASIZE] } { } -jtag_nsrst_delay 100 +adapter_nsrst_delay 100 jtag_ntrst_delay 100 #use combined on interfaces or targets that can't set TRST/SRST separately diff --git a/tcl/target/pxa270.cfg b/tcl/target/pxa270.cfg index 6ca057ca..7aaef8c7 100644 --- a/tcl/target/pxa270.cfg +++ b/tcl/target/pxa270.cfg @@ -28,9 +28,9 @@ if { [info exists CPUTAPID2 ] } { } -# set jtag_nsrst_delay to the delay introduced by your reset circuit +# set adapter_nsrst_delay to the delay introduced by your reset circuit # the rest of the needed delays are built into the openocd program -jtag_nsrst_delay 260 +adapter_nsrst_delay 260 # set the jtag_ntrst_delay to the delay introduced by a reset circuit # the rest of the needed delays are built into the openocd program jtag_ntrst_delay 250 diff --git a/tcl/target/pxa3xx.cfg b/tcl/target/pxa3xx.cfg index 5d649865..62c325b7 100644 --- a/tcl/target/pxa3xx.cfg +++ b/tcl/target/pxa3xx.cfg @@ -59,9 +59,9 @@ if { [info exists CPUTAPID_PXA32X_C0 ] } { set _CPUTAPID_PXA32X_C0 0x7E642013 } -# set jtag_nsrst_delay to the delay introduced by your reset circuit +# set adapter_nsrst_delay to the delay introduced by your reset circuit # the rest of the needed delays are built into the openocd program -jtag_nsrst_delay 260 +adapter_nsrst_delay 260 # set the jtag_ntrst_delay to the delay introduced by a reset circuit # the rest of the needed delays are built into the openocd program diff --git a/tcl/target/samsung_s3c6410.cfg b/tcl/target/samsung_s3c6410.cfg index 91371991..f9738c23 100644 --- a/tcl/target/samsung_s3c6410.cfg +++ b/tcl/target/samsung_s3c6410.cfg @@ -42,7 +42,7 @@ jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm11 -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm1176 -jtag_nsrst_delay 500 +adapter_nsrst_delay 500 jtag_ntrst_delay 500 #reset configuration diff --git a/tcl/target/smp8634.cfg b/tcl/target/smp8634.cfg index b6b037aa..4f3959d5 100644 --- a/tcl/target/smp8634.cfg +++ b/tcl/target/smp8634.cfg @@ -19,7 +19,7 @@ if { [info exists CPUTAPID ] } { set _CPUTAPID 0x08630001 } -jtag_nsrst_delay 100 +adapter_nsrst_delay 100 jtag_ntrst_delay 100 reset_config trst_and_srst separate diff --git a/tcl/target/stm32.cfg b/tcl/target/stm32.cfg index 29c9f7ff..a13dc314 100644 --- a/tcl/target/stm32.cfg +++ b/tcl/target/stm32.cfg @@ -23,7 +23,7 @@ if { [info exists WORKAREASIZE] } { # JTAG speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz adapter_khz 1000 -jtag_nsrst_delay 100 +adapter_nsrst_delay 100 jtag_ntrst_delay 100 #jtag scan chain diff --git a/tcl/target/str730.cfg b/tcl/target/str730.cfg index 3a84897c..a1491ff1 100644 --- a/tcl/target/str730.cfg +++ b/tcl/target/str730.cfg @@ -27,7 +27,7 @@ reset_config trst_and_srst srst_pulls_trst jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID #jtag nTRST and nSRST delay -jtag_nsrst_delay 500 +adapter_nsrst_delay 500 jtag_ntrst_delay 500 set _TARGETNAME $_CHIPNAME.cpu diff --git a/tcl/target/str750.cfg b/tcl/target/str750.cfg index c2fb7869..8a642261 100644 --- a/tcl/target/str750.cfg +++ b/tcl/target/str750.cfg @@ -29,7 +29,7 @@ reset_config trst_and_srst srst_pulls_trst jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID #jtag nTRST and nSRST delay -jtag_nsrst_delay 500 +adapter_nsrst_delay 500 jtag_ntrst_delay 500 set _TARGETNAME $_CHIPNAME.cpu diff --git a/tcl/target/str912.cfg b/tcl/target/str912.cfg index 2defe9fd..6f2981a1 100644 --- a/tcl/target/str912.cfg +++ b/tcl/target/str912.cfg @@ -15,7 +15,7 @@ if { [info exists ENDIAN] } { # jtag speed. We need to stick to 16kHz until we've finished reset. jtag_rclk 16 -jtag_nsrst_delay 100 +adapter_nsrst_delay 100 jtag_ntrst_delay 100 #use combined on interfaces or targets that can't set TRST/SRST separately diff --git a/tcl/target/telo.cfg b/tcl/target/telo.cfg index 99b9cd69..40674b9d 100644 --- a/tcl/target/telo.cfg +++ b/tcl/target/telo.cfg @@ -16,7 +16,7 @@ source [find target/c100helper.tcl] jtag_nsrst_assert_width 100 jtag_ntrst_assert_width 100 # don't talk to JTAG after reset for: [ms] -jtag_nsrst_delay 100 +adapter_nsrst_delay 100 jtag_ntrst_delay 100 reset_config trst_and_srst separate diff --git a/tcl/target/tmpa900.cfg b/tcl/target/tmpa900.cfg index 329e03ca..a5513915 100644 --- a/tcl/target/tmpa900.cfg +++ b/tcl/target/tmpa900.cfg @@ -32,7 +32,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP #use combined on interfaces or targets that can't set TRST/SRST separately reset_config trst_and_srst -jtag_nsrst_delay 20 +adapter_nsrst_delay 20 jtag_ntrst_delay 20 ###################### diff --git a/tcl/target/tmpa910.cfg b/tcl/target/tmpa910.cfg index 29d2d6ef..fa6f87b0 100644 --- a/tcl/target/tmpa910.cfg +++ b/tcl/target/tmpa910.cfg @@ -32,7 +32,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP #use combined on interfaces or targets that can't set TRST/SRST separately reset_config trst_and_srst -jtag_nsrst_delay 20 +adapter_nsrst_delay 20 jtag_ntrst_delay 20 ###################### diff --git a/tcl/target/xba_revA3.cfg b/tcl/target/xba_revA3.cfg index fb02c687..8ff5be93 100644 --- a/tcl/target/xba_revA3.cfg +++ b/tcl/target/xba_revA3.cfg @@ -22,7 +22,7 @@ if { [info exists CPUTAPID ] } { reset_config trst_and_srst separate -jtag_nsrst_delay 100 +adapter_nsrst_delay 100 jtag_ntrst_delay 100 #jtag scan chain diff --git a/tcl/test/syntax1.cfg b/tcl/test/syntax1.cfg index c3d8ed90..79d53848 100644 --- a/tcl/test/syntax1.cfg +++ b/tcl/test/syntax1.cfg @@ -1,4 +1,4 @@ -jtag_nsrst_delay 200 +adapter_nsrst_delay 200 jtag_ntrst_delay 200 #use combined on interfaces or targets that can't set TRST/SRST separately |