3 files changed, 69 insertions, 0 deletions
diff --git a/tcl/board/ek-lm3s9b9x.cfg b/tcl/board/ek-lm3s9b9x.cfg
new file mode 100644
index 00000000..ccf7c883
--- /dev/null
+++ b/tcl/board/ek-lm3s9b9x.cfg
@@ -0,0 +1,18 @@
+#
+# Luminary Micro Stellaris LM3S9B9x Evaluation Kits
+#
+# http://www.luminarymicro.com/products/ek-lm3s9b90.html
+# http://www.luminarymicro.com/products/ek-lm3s9b92.html
+#
+
+source [find interface/luminary-icdi.cfg]
+source [find target/lm3s9b9x.cfg]
+
+# jtag speed
+jtag_khz 500
+
+jtag_nsrst_delay 100
+jtag_ntrst_delay 100
+
+#LM3S9B9x Evaluation Board has only srst
+reset_config srst_only
diff --git a/tcl/interface/luminary-icdi.cfg b/tcl/interface/luminary-icdi.cfg
new file mode 100644
index 00000000..04330a16
--- /dev/null
+++ b/tcl/interface/luminary-icdi.cfg
@@ -0,0 +1,12 @@
+#
+# Luminary Micro Stellaris LM3S9B9x Evaluation Kits
+# In-Circuit Debug Interface (ICDI) Board
+#
+# http://www.luminarymicro.com/products/ek-lm3s9b90.html
+# http://www.luminarymicro.com/products/ek-lm3s9b92.html
+#
+
+interface ft2232
+ft2232_device_desc "Luminary Micro ICDI Board"
+ft2232_layout luminary_icdi
+ft2232_vid_pid 0x0403 0xbcda
diff --git a/tcl/target/lm3s9b9x.cfg b/tcl/target/lm3s9b9x.cfg
new file mode 100644
index 00000000..e5a5b504
--- /dev/null
+++ b/tcl/target/lm3s9b9x.cfg
@@ -0,0 +1,39 @@
+#
+# Luminary Micro Stellaris LM3S9B9x Microcontroller
+#
+# http://www.luminarymicro.com/products/lm3s9b90.html
+# http://www.luminarymicro.com/products/lm3s9b92.htm
+#
+
+if { [info exists CHIPNAME] } {	
+   set  _CHIPNAME $CHIPNAME    
+} else {	 
+   set  _CHIPNAME lm3s9b9x
+}
+
+if { [info exists ENDIAN] } {	
+   set  _ENDIAN $ENDIAN    
+} else {	 
+  # this defaults to a little endian
+   set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+   # forth generation Tempest device
+   set _CPUTAPID 0x4ba00477
+}
+
+#jtag scan chain
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 1 -irmask 0xf -expected-id $_CPUTAPID
+
+#Cortex-M3 with Luminary lm3s variant
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME -variant lm3s
+
+# 16k working area at base of ram
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x4000 -work-area-backup 0
+
+#flash configuration
+flash bank stellaris 0 0 0 0 0