1 files changed, 127 insertions, 130 deletions
diff --git a/testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk b/testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk
index b1148c6a..5b78daa2 100644
--- a/testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk
+++ b/testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk
@@ -1,131 +1,128 @@
-echo Setting up for the FreeScale iMX31 Board.\n
-# SETUP GDB :
-#
-# Common gdb setup for ARM CPUs
-set complaints 1
-set output-radix 10
-set input-radix 10
-set prompt (arm-gdb) 
-set endian little
-dir .
-
-
-# DEFINE MACROS	:
-#
-# Create a "refresh" macro to update gdb's screens after the cpu
-# has been stopped by the other CPU or following an "monitor allstop" 
-define refresh
-	monitor set hbreak
-	cont
-	monitor clear hbreak
-end
-
-
-# CONNECT TO TARGET :
-target remote 127.0.0.1:3333
-monitor reset run
-#FIX!!!! should be reset init!
-monitor reset halt
-
-# iMX31 PDK board initialization commands:
-
-#// init_ccm
-
-monitor mww 0x53FC0000 0x040
-monitor mww 0x53F80000 0x074B0B7D
-
-#//532-133-66.5
-#//monitor mww 0x53F80004 0xFF871D58
-#//monitor mww 0x53F80010 0x0033280C
-
-#// 399MHz - 26MHz input, PD=1,MFI=7, MFN=27, MFD=40
-monitor mww 0x53F80004 0xFF871D50
-monitor mww 0x53F80010 0x00271C1B
-
-#// 208-104-52
-#//monitor mww 0x53F80004 0xFF871D48
-#//monitor mww 0x53F80010 0x04002000
-
-
-#// Configure CPLD on CS5 
-monitor mww 0xb8002050 0x0000DCF6
-monitor mww 0xb8002054 0x444A4541
-monitor mww 0xb8002058 0x44443302
-
-#// Disable maximum drive strength for SDRAM/DDR lines by clearing DSE1 bits
-#// in SW_PAD_CTL registers
-
-#// SDCLK
-monitor mww 0x43FAC26C 0
- 
-#// CAS
-monitor mww 0x43FAC270 0
- 
-#// RAS
-monitor mww 0x43FAC274 0
- 
-#// CS2 (CSD0)
-monitor mww 0x43FAC27C 0x1000
-    
-#// DQM3
-monitor mww 0x43FAC284 0
- 
-#// DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC)
-monitor mww 0x43FAC288 0
-monitor mww 0x43FAC28C 0
-monitor mww 0x43FAC290 0
-monitor mww 0x43FAC294 0
-monitor mww 0x43FAC298 0
-monitor mww 0x43FAC29C 0
-monitor mww 0x43FAC2A0 0
-monitor mww 0x43FAC2A4 0
-monitor mww 0x43FAC2A8 0
-monitor mww 0x43FAC2AC 0
-monitor mww 0x43FAC2B0 0
-monitor mww 0x43FAC2B4 0
-monitor mww 0x43FAC2B8 0
-monitor mww 0x43FAC2BC 0
-monitor mww 0x43FAC2C0 0
-monitor mww 0x43FAC2C4 0
-monitor mww 0x43FAC2C8 0
-monitor mww 0x43FAC2CC 0
-monitor mww 0x43FAC2D0 0
-monitor mww 0x43FAC2D4 0
-monitor mww 0x43FAC2D8 0
-monitor mww 0x43FAC2DC 0
-
-#// Initialization script for 32 bit DDR on MX31 PDK 
-monitor mww 0xB8001010 0x00000004
-monitor mww 0xB8001004 0x006ac73a
-monitor mww 0xB8001000 0x92100000
-monitor mww 0x80000f00 0x12344321
-monitor mww 0xB8001000 0xa2100000
-monitor mww 0x80000000 0x12344321
-monitor mww 0x80000000 0x12344321
-monitor mww 0xB8001000 0xb2100000
-#monitor char 0x80000033 0xda
-monitor mwb 0x80000033 0xda
-#monitor char 0x81000000 0xff
-monitor mwb 0x81000000 0xff
-monitor mww 0xB8001000 0x82226080
-monitor mww 0x80000000 0xDEADBEEF
-monitor mww 0xB8001010 0x0000000c
-
-#  LOAD IMAGE :
-#
-
-# Load the program executable called "u-boot"
-load test.elf
-
-# Load the symbols for the program.
-symbol-file test.elf
-
-# RUN TO MAIN :
-#
-# Set a breakpoint at main().
-#b reset
-b main
-
-# Run to the breakpoint.
-c
+echo Setting up for the FreeScale iMX31 Board.\n
+# SETUP GDB :
+#
+# Common gdb setup for ARM CPUs
+set complaints 1
+set output-radix 10
+set input-radix 10
+set prompt (arm-gdb)
+set endian little
+dir .
+
+# DEFINE MACROS	:
+#
+# Create a "refresh" macro to update gdb's screens after the cpu
+# has been stopped by the other CPU or following an "monitor allstop"
+define refresh
+	monitor set hbreak
+	cont
+	monitor clear hbreak
+end
+
+# CONNECT TO TARGET :
+target remote 127.0.0.1:3333
+monitor reset run
+#FIX!!!! should be reset init!
+monitor reset halt
+
+# iMX31 PDK board initialization commands:
+
+#// init_ccm
+
+monitor mww 0x53FC0000 0x040
+monitor mww 0x53F80000 0x074B0B7D
+
+#//532-133-66.5
+#//monitor mww 0x53F80004 0xFF871D58
+#//monitor mww 0x53F80010 0x0033280C
+
+#// 399MHz - 26MHz input, PD=1,MFI=7, MFN=27, MFD=40
+monitor mww 0x53F80004 0xFF871D50
+monitor mww 0x53F80010 0x00271C1B
+
+#// 208-104-52
+#//monitor mww 0x53F80004 0xFF871D48
+#//monitor mww 0x53F80010 0x04002000
+
+#// Configure CPLD on CS5 
+monitor mww 0xb8002050 0x0000DCF6
+monitor mww 0xb8002054 0x444A4541
+monitor mww 0xb8002058 0x44443302
+
+#// Disable maximum drive strength for SDRAM/DDR lines by clearing DSE1 bits
+#// in SW_PAD_CTL registers
+
+#// SDCLK
+monitor mww 0x43FAC26C 0
+
+#// CAS
+monitor mww 0x43FAC270 0
+
+#// RAS
+monitor mww 0x43FAC274 0
+
+#// CS2 (CSD0)
+monitor mww 0x43FAC27C 0x1000
+
+#// DQM3
+monitor mww 0x43FAC284 0
+
+#// DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC)
+monitor mww 0x43FAC288 0
+monitor mww 0x43FAC28C 0
+monitor mww 0x43FAC290 0
+monitor mww 0x43FAC294 0
+monitor mww 0x43FAC298 0
+monitor mww 0x43FAC29C 0
+monitor mww 0x43FAC2A0 0
+monitor mww 0x43FAC2A4 0
+monitor mww 0x43FAC2A8 0
+monitor mww 0x43FAC2AC 0
+monitor mww 0x43FAC2B0 0
+monitor mww 0x43FAC2B4 0
+monitor mww 0x43FAC2B8 0
+monitor mww 0x43FAC2BC 0
+monitor mww 0x43FAC2C0 0
+monitor mww 0x43FAC2C4 0
+monitor mww 0x43FAC2C8 0
+monitor mww 0x43FAC2CC 0
+monitor mww 0x43FAC2D0 0
+monitor mww 0x43FAC2D4 0
+monitor mww 0x43FAC2D8 0
+monitor mww 0x43FAC2DC 0
+
+#// Initialization script for 32 bit DDR on MX31 PDK
+monitor mww 0xB8001010 0x00000004
+monitor mww 0xB8001004 0x006ac73a
+monitor mww 0xB8001000 0x92100000
+monitor mww 0x80000f00 0x12344321
+monitor mww 0xB8001000 0xa2100000
+monitor mww 0x80000000 0x12344321
+monitor mww 0x80000000 0x12344321
+monitor mww 0xB8001000 0xb2100000
+#monitor char 0x80000033 0xda
+monitor mwb 0x80000033 0xda
+#monitor char 0x81000000 0xff
+monitor mwb 0x81000000 0xff
+monitor mww 0xB8001000 0x82226080
+monitor mww 0x80000000 0xDEADBEEF
+monitor mww 0xB8001010 0x0000000c
+
+#  LOAD IMAGE :
+#
+
+# Load the program executable called "u-boot"
+load test.elf
+
+# Load the symbols for the program.
+symbol-file test.elf
+
+# RUN TO MAIN :
+#
+# Set a breakpoint at main().
+#b reset
+b main
+
+# Run to the breakpoint.
+c