Rename /openembedded/ -> /meta/

git-svn-id: https://svn.o-hand.com/repos/poky/trunk@530 311d38ba-8fff-0310-9ca6-ca027cbcb966

4 files changed, 0 insertions, 333 deletions

diff --git a/openembedded/packages/irda-utils/files/init b/openembedded/packages/irda-utils/files/init
deleted file mode 100755
index 9becfcc0e..000000000
--- a/openembedded/packages/irda-utils/files/init
+++ /dev/null
@@ -1,72 +0,0 @@
-#! /bin/sh
-
-module_id() {
-        awk 'BEGIN { FS=": " } /Hardware/ { print $2 } ' </proc/cpuinfo
-}
-
-if [ ! -f /etc/sysconfig/irda ]; then
-
-    case `module_id` in
-	"HP iPAQ H2200" | "HP iPAQ HX4700")
-	    IRDA=yes
-	    DEVICE=/dev/ttyS2
-	    DONGLE=
-	    DISCOVERY=
-	    ;;
-	*)
-	    IRDA=yes
-	    DEVICE=/dev/ttyS1
-	    DONGLE=
-	    DISCOVERY=
-	    ;;
-    esac
-
-    mkdir -p /etc/sysconfig
-    echo "IRDA=$IRDA" > /etc/sysconfig/irda
-    if [ $IRDA = "yes" ]; then
-	echo "DEVICE=$DEVICE" >> /etc/sysconfig/irda
-	echo "DONGLE=$DONGLE" >> /etc/sysconfig/irda
-	echo "DISCOVERY=$DISCOVERY" >> /etc/sysconfig/irda
-    fi
-fi
-
-. /etc/sysconfig/irda
-
-# Check that irda is up.
-[ ${IRDA} = "no" ] && exit 0
-
-[ -f /usr/sbin/irattach ] || exit 0
-
-ARGS=
-if [ $DONGLE ]; then
-	ARGS="$ARGS -d $DONGLE"
-fi
-if [ "$DISCOVERY" = "yes" ];then
-	ARGS="$ARGS -s"
-fi
-
-case "$1" in
-  start)
-        echo -n "Starting IrDA: "
-		irattach ${DEVICE} ${ARGS} > /dev/null 2>&1 &
-        echo "$NAME."
-        ;;
-  stop)
-        echo -n "Stopping IrDA: "
-		killall irattach > /dev/null 2>&1
-        echo "$NAME."
-        ;;
-  restart|force-reload)
-        echo -n "Restarting IrDA: "
-		irattach ${DEVICE} ${ARGS} > /dev/null 2>&1 &
-        sleep 1
-		killall irattach > /dev/null 2>&1
-        echo "$NAME."
-        ;;
-  *)
-        N=/etc/init.d/$NAME
-        echo "Usage: $N {start|stop|restart|force-reload}" >&2
-        exit 1
-        ;;
-esac
-
diff --git a/openembedded/packages/irda-utils/irda-utils/configure.patch b/openembedded/packages/irda-utils/irda-utils/configure.patch
deleted file mode 100644
index a36afe218..000000000
--- a/openembedded/packages/irda-utils/irda-utils/configure.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-
-#
-# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
-#
-
---- irda-utils-0.9.15/./irdadump/configure.in~configure
-+++ irda-utils-0.9.15/./irdadump/configure.in
-@@ -1,5 +1,6 @@
- dnl Process this file with autoconf to produce a configure script.
--AC_INIT(configure.in)
-+AC_INIT
-+AC_CONFIG_SRCDIR([configure.in])
- AM_INIT_AUTOMAKE(libirdadump, 0.1)
- AM_CONFIG_HEADER(config.h)
- 
-@@ -18,7 +19,8 @@
- 
- dnl Checks for library functions.
- 
--AC_OUTPUT([
-+AC_CONFIG_FILES([
- Makefile 
- src/Makefile
- shell/Makefile])
-+AC_OUTPUT
diff --git a/openembedded/packages/irda-utils/irda-utils/m4.patch b/openembedded/packages/irda-utils/irda-utils/m4.patch
deleted file mode 100644
index 9c077bb24..000000000
--- a/openembedded/packages/irda-utils/irda-utils/m4.patch
+++ /dev/null
@@ -1,204 +0,0 @@
-
-#
-# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
-#
-
---- /dev/null
-+++ irda-utils-0.9.15/irdadump/m4/glib.m4
-@@ -0,0 +1,196 @@
-+# Configure paths for GLIB
-+# Owen Taylor     97-11-3
-+
-+dnl AM_PATH_GLIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
-+dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if "gmodule" or 
-+dnl gthread is specified in MODULES, pass to glib-config
-+dnl
-+AC_DEFUN(AM_PATH_GLIB,
-+[dnl 
-+dnl Get the cflags and libraries from the glib-config script
-+dnl
-+AC_ARG_WITH(glib-prefix,[  --with-glib-prefix=PFX   Prefix where GLIB is installed (optional)],
-+            glib_config_prefix="$withval", glib_config_prefix="")
-+AC_ARG_WITH(glib-exec-prefix,[  --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)],
-+            glib_config_exec_prefix="$withval", glib_config_exec_prefix="")
-+AC_ARG_ENABLE(glibtest, [  --disable-glibtest       Do not try to compile and run a test GLIB program],
-+		    , enable_glibtest=yes)
-+
-+  if test x$glib_config_exec_prefix != x ; then
-+     glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix"
-+     if test x${GLIB_CONFIG+set} != xset ; then
-+        GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config
-+     fi
-+  fi
-+  if test x$glib_config_prefix != x ; then
-+     glib_config_args="$glib_config_args --prefix=$glib_config_prefix"
-+     if test x${GLIB_CONFIG+set} != xset ; then
-+        GLIB_CONFIG=$glib_config_prefix/bin/glib-config
-+     fi
-+  fi
-+
-+  for module in . $4
-+  do
-+      case "$module" in
-+         gmodule) 
-+             glib_config_args="$glib_config_args gmodule"
-+         ;;
-+         gthread) 
-+             glib_config_args="$glib_config_args gthread"
-+         ;;
-+      esac
-+  done
-+
-+  AC_PATH_PROG(GLIB_CONFIG, glib-config, no)
-+  min_glib_version=ifelse([$1], ,0.99.7,$1)
-+  AC_MSG_CHECKING(for GLIB - version >= $min_glib_version)
-+  no_glib=""
-+  if test "$GLIB_CONFIG" = "no" ; then
-+    no_glib=yes
-+  else
-+    GLIB_CFLAGS=`$GLIB_CONFIG $glib_config_args --cflags`
-+    GLIB_LIBS=`$GLIB_CONFIG $glib_config_args --libs`
-+    glib_config_major_version=`$GLIB_CONFIG $glib_config_args --version | \
-+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-+    glib_config_minor_version=`$GLIB_CONFIG $glib_config_args --version | \
-+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-+    glib_config_micro_version=`$GLIB_CONFIG $glib_config_args --version | \
-+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-+    if test "x$enable_glibtest" = "xyes" ; then
-+      ac_save_CFLAGS="$CFLAGS"
-+      ac_save_LIBS="$LIBS"
-+      CFLAGS="$CFLAGS $GLIB_CFLAGS"
-+      LIBS="$GLIB_LIBS $LIBS"
-+dnl
-+dnl Now check if the installed GLIB is sufficiently new. (Also sanity
-+dnl checks the results of glib-config to some extent
-+dnl
-+      rm -f conf.glibtest
-+      AC_TRY_RUN([
-+#include <glib.h>
-+#include <stdio.h>
-+#include <stdlib.h>
-+
-+int 
-+main ()
-+{
-+  int major, minor, micro;
-+  char *tmp_version;
-+
-+  system ("touch conf.glibtest");
-+
-+  /* HP/UX 9 (%@#!) writes to sscanf strings */
-+  tmp_version = g_strdup("$min_glib_version");
-+  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
-+     printf("%s, bad version string\n", "$min_glib_version");
-+     exit(1);
-+   }
-+
-+  if ((glib_major_version != $glib_config_major_version) ||
-+      (glib_minor_version != $glib_config_minor_version) ||
-+      (glib_micro_version != $glib_config_micro_version))
-+    {
-+      printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", 
-+             $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
-+             glib_major_version, glib_minor_version, glib_micro_version);
-+      printf ("*** was found! If glib-config was correct, then it is best\n");
-+      printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n");
-+      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
-+      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
-+      printf("*** required on your system.\n");
-+      printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n");
-+      printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n");
-+      printf("*** before re-running configure\n");
-+    } 
-+  else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
-+	   (glib_minor_version != GLIB_MINOR_VERSION) ||
-+           (glib_micro_version != GLIB_MICRO_VERSION))
-+    {
-+      printf("*** GLIB header files (version %d.%d.%d) do not match\n",
-+	     GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
-+      printf("*** library (version %d.%d.%d)\n",
-+	     glib_major_version, glib_minor_version, glib_micro_version);
-+    }
-+  else
-+    {
-+      if ((glib_major_version > major) ||
-+        ((glib_major_version == major) && (glib_minor_version > minor)) ||
-+        ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
-+      {
-+        return 0;
-+       }
-+     else
-+      {
-+        printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
-+               glib_major_version, glib_minor_version, glib_micro_version);
-+        printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
-+	       major, minor, micro);
-+        printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
-+        printf("***\n");
-+        printf("*** If you have already installed a sufficiently new version, this error\n");
-+        printf("*** probably means that the wrong copy of the glib-config shell script is\n");
-+        printf("*** being found. The easiest way to fix this is to remove the old version\n");
-+        printf("*** of GLIB, but you can also set the GLIB_CONFIG environment to point to the\n");
-+        printf("*** correct copy of glib-config. (In this case, you will have to\n");
-+        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
-+        printf("*** so that the correct libraries are found at run-time))\n");
-+      }
-+    }
-+  return 1;
-+}
-+],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
-+       CFLAGS="$ac_save_CFLAGS"
-+       LIBS="$ac_save_LIBS"
-+     fi
-+  fi
-+  if test "x$no_glib" = x ; then
-+     AC_MSG_RESULT(yes)
-+     ifelse([$2], , :, [$2])     
-+  else
-+     AC_MSG_RESULT(no)
-+     if test "$GLIB_CONFIG" = "no" ; then
-+       echo "*** The glib-config script installed by GLIB could not be found"
-+       echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in"
-+       echo "*** your path, or set the GLIB_CONFIG environment variable to the"
-+       echo "*** full path to glib-config."
-+     else
-+       if test -f conf.glibtest ; then
-+        :
-+       else
-+          echo "*** Could not run GLIB test program, checking why..."
-+          CFLAGS="$CFLAGS $GLIB_CFLAGS"
-+          LIBS="$LIBS $GLIB_LIBS"
-+          AC_TRY_LINK([
-+#include <glib.h>
-+#include <stdio.h>
-+],      [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ],
-+        [ echo "*** The test program compiled, but did not run. This usually means"
-+          echo "*** that the run-time linker is not finding GLIB or finding the wrong"
-+          echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
-+          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
-+          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
-+          echo "*** is required on your system"
-+	  echo "***"
-+          echo "*** If you have an old version installed, it is best to remove it, although"
-+          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
-+          echo "***"
-+          echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
-+          echo "*** came with the system with the command"
-+          echo "***"
-+          echo "***    rpm --erase --nodeps gtk gtk-devel" ],
-+        [ echo "*** The test program failed to compile or link. See the file config.log for the"
-+          echo "*** exact error that occured. This usually means GLIB was incorrectly installed"
-+          echo "*** or that you have moved GLIB since it was installed. In the latter case, you"
-+          echo "*** may want to edit the glib-config script: $GLIB_CONFIG" ])
-+          CFLAGS="$ac_save_CFLAGS"
-+          LIBS="$ac_save_LIBS"
-+       fi
-+     fi
-+     GLIB_CFLAGS=""
-+     GLIB_LIBS=""
-+     ifelse([$3], , :, [$3])
-+  fi
-+  AC_SUBST(GLIB_CFLAGS)
-+  AC_SUBST(GLIB_LIBS)
-+  rm -f conf.glibtest
-+])
diff --git a/openembedded/packages/irda-utils/irda-utils_0.9.16.bb b/openembedded/packages/irda-utils/irda-utils_0.9.16.bb
deleted file mode 100644
index db56a7044..000000000
--- a/openembedded/packages/irda-utils/irda-utils_0.9.16.bb
+++ /dev/null
@@ -1,32 +0,0 @@
-DESCRIPTION = "Provides common files needed to use IrDA. \
-IrDA allows communication over Infrared with other devices \
-such as phones and laptops."
-SECTION = "base"
-LICENSE = "GPL"
-PR = "r5"
-
-SRC_URI = "${SOURCEFORGE_MIRROR}/irda/irda-utils-${PV}.tar.gz \
-	   file://configure.patch;patch=1 \
-	   file://m4.patch;patch=1 \
-	   file://init"
-
-export SYS_INCLUDES="-I${STAGING_INCDIR}"
-
-inherit autotools update-rc.d
-
-INITSCRIPT_NAME = "irattach"
-INITSCRIPT_PARAMS = "defaults 20"
-
-do_compile () {
-	oe_runmake -e -C irattach
-	oe_runmake -e -C irdaping
-}
-
-do_install () {
-	install -d ${D}${sbindir}
-	oe_runmake -C irattach ROOT="${D}" install
-	oe_runmake -C irdaping ROOT="${D}" install
-
-	install -d ${D}${sysconfdir}/init.d
-	install -m 0755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/irattach
-}