o Moving tinyprintf and stm libraries under thirdparty.

1 files changed, 599 insertions, 0 deletions

diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/src/stm32l1xx_aes.c b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/src/stm32l1xx_aes.c
new file mode 100644
index 0000000..7728543
--- /dev/null
+++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/src/stm32l1xx_aes.c
@@ -0,0 +1,599 @@
+/**
+  ******************************************************************************
+  * @file    stm32l1xx_aes.c
+  * @author  MCD Application Team
+  * @version V1.1.1
+  * @date    05-March-2012
+  * @brief   This file provides firmware functions to manage the following 
+  *          functionalities of the AES peripheral:           
+  *           + Configuration
+  *           + Read/Write operations
+  *           + DMA transfers management  
+  *           + Interrupts and flags management
+  * 
+  *  @verbatim
+ ===============================================================================
+                        ##### AES Peripheral features #####
+ ===============================================================================
+....[..]
+   (#) The Advanced Encryption Standard hardware accelerator (AES) can be used
+       to both encipher and decipher data using AES algorithm.
+   (#) The AES supports 4 operation modes:
+       (++) Encryption: It consumes 214 clock cycle when processing one 128-bit block
+       (++) Decryption: It consumes 214 clock cycle when processing one 128-bit block
+       (++) Key derivation for decryption: It consumes 80 clock cycle when processing one 128-bit block
+       (++) Key Derivation and decryption: It consumes 288 clock cycle when processing one 128-bit blobk
+   (#) Moreover 3 chaining modes are supported:
+       (++) Electronic codebook (ECB): Each plain text is encrypted/decrypted separately
+       (++) Cipher block chaining (CBC): Each block is XORed with the previous block
+       (++) Counter mode (CTR): A 128-bit counter is encrypted and then XORed with the
+          plain text to give the cipher text
+  (#) The AES peripheral supports data swapping: 1-bit, 8-bit, 16-bit and 32-bit.
+  (#) The AES peripheral supports write/read error handling with interrupt capability.
+  (#) Automatic data flow control with support of direct memory access (DMA) using
+      2 channels, one for incoming data (DMA2 Channel5), and one for outcoming data
+      (DMA2 Channel3).
+
+                      ##### How to use this driver #####
+ ===============================================================================
+    [..]
+        (#) AES AHB clock must be enabled to get write access to AES registers 
+            using RCC_AHBPeriphClockCmd(RCC_AHBPeriph_AES, ENABLE).
+        (#) Initialize the key using AES_KeyInit().
+        (#) Configure the AES operation mode using AES_Init().
+        (#) If required, enable interrupt source using AES_ITConfig() and
+            enable the AES interrupt vector using NVIC_Init().
+        (#) If required, when using the DMA mode.
+            (##) Configure the DMA using DMA_Init().
+            (##) Enable DMA requests using AES_DMAConfig().
+        (#) Enable the AES peripheral using AES_Cmd().
+    @endverbatim
+  
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l1xx_aes.h"
+#include "stm32l1xx_rcc.h"
+
+/** @addtogroup STM32L1xx_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup AES 
+  * @brief AES driver modules
+  * @{
+  */ 
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#define CR_CLEAR_MASK  ((uint32_t)0xFFFFFF81)
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup AES_Private_Functions
+  * @{
+  */
+
+/** @defgroup AES_Group1 Initialization and configuration
+ *  @brief   Initialization and configuration.
+ *
+@verbatim
+ ===============================================================================
+                ##### Initialization and configuration #####
+ ===============================================================================
+
+@endverbatim
+  * @{
+  */  
+
+  /**
+  * @brief  Deinitializes AES peripheral registers to their default reset values.
+  * @param  None
+  * @retval None
+  */
+void AES_DeInit(void)
+{
+  /* Enable AES reset state */
+  RCC_AHBPeriphResetCmd(RCC_AHBPeriph_AES, ENABLE);
+  /* Release AES from reset state */
+  RCC_AHBPeriphResetCmd(RCC_AHBPeriph_AES, DISABLE);
+}
+
+/**
+  * @brief  Initializes the AES peripheral according to the specified parameters
+  *         in the AES_InitStruct:
+  *           - AES_Operation: specifies the operation mode (encryption, decryption...).
+  *           - AES_Chaining: specifies the chaining mode (ECB, CBC or CTR).
+  *           - AES_DataType: specifies the data swapping type: 32-bit, 16-bit, 8-bit or 1-bit.
+  * @note   If AES is already enabled, use AES_Cmd(DISABLE) before setting the new 
+  *         configuration (When AES is enabled, setting configuration is forbidden).
+  * @param  AES_InitStruct: pointer to an AES_InitTypeDef structure that contains 
+  *         the configuration information for AES peripheral.
+  * @retval None
+  */
+void AES_Init(AES_InitTypeDef* AES_InitStruct)
+{
+  uint32_t tmpreg = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_AES_MODE(AES_InitStruct->AES_Operation));
+  assert_param(IS_AES_CHAINING(AES_InitStruct->AES_Chaining));
+  assert_param(IS_AES_DATATYPE(AES_InitStruct->AES_DataType));
+
+  /* Get AES CR register value */
+  tmpreg = AES->CR;
+  
+  /* Clear DATATYPE[1:0], MODE[1:0] and CHMOD[1:0] bits */
+  tmpreg &= (uint32_t)CR_CLEAR_MASK;
+  
+  tmpreg |= (AES_InitStruct->AES_Operation | AES_InitStruct->AES_Chaining | AES_InitStruct->AES_DataType);
+
+  AES->CR = (uint32_t) tmpreg;
+}
+
+/**
+  * @brief  Initializes the AES Keys according to the specified parameters in the AES_KeyInitStruct.
+  * @param  AES_KeyInitStruct: pointer to an AES_KeyInitTypeDef structure that
+  *         contains the configuration information for the specified AES Keys.
+  * @note   This function must be called while the AES is disabled.
+  * @note   In encryption, key derivation and key derivation + decryption modes,
+  *         AES_KeyInitStruct must contain the encryption key.
+  *         In decryption mode, AES_KeyInitStruct must contain the decryption key.
+  * @retval None
+  */
+void AES_KeyInit(AES_KeyInitTypeDef* AES_KeyInitStruct)
+{
+  AES->KEYR0 = AES_KeyInitStruct->AES_Key0;
+  AES->KEYR1 = AES_KeyInitStruct->AES_Key1;
+  AES->KEYR2 = AES_KeyInitStruct->AES_Key2;
+  AES->KEYR3 = AES_KeyInitStruct->AES_Key3;
+}
+
+/**
+  * @brief  Initializes the AES Initialization Vector IV according to 
+  *         the specified parameters in the AES_IVInitStruct.
+  * @param  AES_KeyInitStruct: pointer to an AES_IVInitTypeDef structure that
+  *         contains the configuration information for the specified AES IV.
+  * @note   When ECB chaining mode is selected, Initialization Vector IV has no
+  *         meaning.
+  *         When CTR chaining mode is selected, AES_IV0 contains the CTR value.
+  *         AES_IV1, AES_IV2 and AES_IV3 contains nonce value.
+  * @retval None
+  */
+void AES_IVInit(AES_IVInitTypeDef* AES_IVInitStruct)
+{
+  AES->IVR0 = AES_IVInitStruct->AES_IV0;
+  AES->IVR1 = AES_IVInitStruct->AES_IV1;
+  AES->IVR2 = AES_IVInitStruct->AES_IV2;
+  AES->IVR3 = AES_IVInitStruct->AES_IV3;
+}
+
+/**
+  * @brief  Enable or disable the AES peripheral.
+  * @param  NewState: new state of the AES peripheral.
+  *         This parameter can be: ENABLE or DISABLE.
+  * @note   The key must be written while AES is disabled.
+  * @retval None
+  */
+void AES_Cmd(FunctionalState NewState)
+{
+  /* Check the parameter */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+  if (NewState != DISABLE)
+  {
+    /* Enable the AES peripheral */
+    AES->CR |= (uint32_t) AES_CR_EN;   /**< AES Enable */
+  }
+  else
+  {
+    /* Disable the AES peripheral */
+    AES->CR &= (uint32_t)(~AES_CR_EN);  /**< AES Disable */
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup AES_Group2 Structures initialization functions
+ *  @brief   Structures initialization.
+ *
+@verbatim
+ ===============================================================================
+              ##### Structures initialization functions #####
+ ===============================================================================
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Fills each AES_InitStruct member with its default value.
+  * @param  AES_InitStruct: pointer to an AES_InitTypeDef structure which will 
+  *         be initialized.
+  * @retval None
+  */
+void AES_StructInit(AES_InitTypeDef* AES_InitStruct)
+{
+  AES_InitStruct->AES_Operation = AES_Operation_Encryp;
+  AES_InitStruct->AES_Chaining = AES_Chaining_ECB;
+  AES_InitStruct->AES_DataType = AES_DataType_32b;
+}
+
+/**
+  * @brief  Fills each AES_KeyInitStruct member with its default value.
+  * @param  AES_KeyInitStruct: pointer to an AES_KeyInitStruct structure which 
+  *         will be initialized.
+  * @retval None
+  */
+void AES_KeyStructInit(AES_KeyInitTypeDef* AES_KeyInitStruct)
+{
+  AES_KeyInitStruct->AES_Key0 = 0x00000000;
+  AES_KeyInitStruct->AES_Key1 = 0x00000000;
+  AES_KeyInitStruct->AES_Key2 = 0x00000000;
+  AES_KeyInitStruct->AES_Key3 = 0x00000000;
+}
+
+/**
+  * @brief  Fills each AES_IVInitStruct member with its default value.
+  * @param  AES_IVInitStruct: pointer to an AES_IVInitTypeDef structure which
+  *         will be initialized.
+  * @retval None
+  */
+void AES_IVStructInit(AES_IVInitTypeDef* AES_IVInitStruct)
+{
+  AES_IVInitStruct->AES_IV0 = 0x00000000;
+  AES_IVInitStruct->AES_IV1 = 0x00000000;
+  AES_IVInitStruct->AES_IV2 = 0x00000000;
+  AES_IVInitStruct->AES_IV3 = 0x00000000;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup AES_Group3 AES Read and Write
+ *  @brief   AES Read and Write.
+ *
+@verbatim
+ ===============================================================================
+                  ##### AES Read and Write functions #####
+ ===============================================================================
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Write data in DINR register to be processed by AES peripheral.
+  * @note   To process 128-bit data (4 * 32-bit), this function must be called
+  *         four times to write the 128-bit data in the 32-bit register DINR.
+  * @note   When an unexpected write to DOUTR register is detected, WRERR flag is
+  *         set.
+  * @param  Data: The data to be processed.
+  * @retval None
+  */
+void AES_WriteSubData(uint32_t Data)
+{
+  /* Write Data */
+  AES->DINR = Data;
+}
+
+/**
+  * @brief  Returns the data in DOUTR register processed by AES peripheral.
+  * @note   This function must be called four times to get the 128-bit data.
+  * @note   When an unexpected read of DINR register is detected, RDERR flag is
+  *         set.
+  * @retval The processed data.
+  */
+uint32_t AES_ReadSubData(void)
+{
+  /* Read Data */
+  return AES->DOUTR;
+}
+
+/**
+  * @brief  Read the Key value.
+  * @param  AES_KeyInitStruct: pointer to an AES_KeyInitTypeDef structure which
+  *         will contain the key.
+  * @note   When the key derivation mode is selected, AES must be disabled
+  *         (AES_Cmd(DISABLE)) before reading the decryption key.
+  *         Reading the key while the AES is enabled will return unpredictable
+  *         value.
+  * @retval None
+  */
+void AES_ReadKey(AES_KeyInitTypeDef* AES_KeyInitStruct)
+{
+  AES_KeyInitStruct->AES_Key0 = AES->KEYR0;
+  AES_KeyInitStruct->AES_Key1 = AES->KEYR1;
+  AES_KeyInitStruct->AES_Key2 = AES->KEYR2;
+  AES_KeyInitStruct->AES_Key3 = AES->KEYR3;
+}
+
+/**
+  * @brief  Read the Initialization Vector IV value.
+  * @param  AES_IVInitStruct: pointer to an AES_IVInitTypeDef structure which
+  *         will contain the Initialization Vector IV.
+  * @note   When the AES is enabled Reading the Initialization Vector IV value
+  *         will return 0. The AES must be disabled using AES_Cmd(DISABLE)
+  *         to get the right value.
+  * @note   When ECB chaining mode is selected, Initialization Vector IV has no
+  *         meaning.
+  *         When CTR chaining mode is selected, AES_IV0 contains 32-bit Counter value.
+  *         AES_IV1, AES_IV2 and AES_IV3 contains nonce value.
+  * @retval None
+  */
+void AES_ReadIV(AES_IVInitTypeDef* AES_IVInitStruct)
+{
+  AES_IVInitStruct->AES_IV0 = AES->IVR0;
+  AES_IVInitStruct->AES_IV1 = AES->IVR1;
+  AES_IVInitStruct->AES_IV2 = AES->IVR2;
+  AES_IVInitStruct->AES_IV3 = AES->IVR3;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup AES_Group4 DMA transfers management functions
+ *  @brief   DMA transfers management function.
+ *
+@verbatim
+ ===============================================================================
+               ##### DMA transfers management functions #####
+ ===============================================================================
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Configures the AES DMA interface.
+  * @param  AES_DMATransfer: Specifies the AES DMA transfer.
+  *   This parameter can be one of the following values:
+  *     @arg AES_DMATransfer_In: When selected, DMA manages the data input phase.
+  *     @arg AES_DMATransfer_Out: When selected, DMA manages the data output phase.
+  *     @arg AES_DMATransfer_InOut: When selected, DMA manages both the data input/output phases.
+  * @param  NewState Indicates the new state of the AES DMA interface.
+  *           This parameter can be: ENABLE or DISABLE.
+  * @note   The DMA has no action in key derivation mode.
+  * @retval None
+  */
+void AES_DMAConfig(uint32_t AES_DMATransfer, FunctionalState NewState)
+{
+  /* Check the parameter */
+  assert_param(IS_AES_DMA_TRANSFER(AES_DMATransfer));
+
+  if (NewState != DISABLE)
+  {
+    /* Enable the DMA transfer */
+    AES->CR |= (uint32_t) AES_DMATransfer;
+  }
+  else
+  {
+    /* Disable the DMA transfer */
+    AES->CR &= (uint32_t)(~AES_DMATransfer);
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup AES_Group5 Interrupts and flags management functions
+ *  @brief   Interrupts and flags management functions.
+ *
+@verbatim
+
+ ===============================================================================
+           ##### Interrupts and flags management functions #####
+ ===============================================================================
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Enables or disables the specified AES interrupt.
+  * @param  AES_IT: Specifies the AES interrupt source to enable/disable.
+  *     This parameter can be any combinations of the following values:
+  *     @arg AES_IT_CC: Computation Complete Interrupt. If enabled, once CCF 
+  *                     flag is set an interrupt is generated.
+  *     @arg AES_IT_ERR: Error Interrupt. If enabled, once a read error
+  *                      flags (RDERR) or write error flag (WRERR) is set,
+  *                      an interrupt is generated.
+  * @param  NewState: The new state of the AES interrupt source.
+  *                   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void AES_ITConfig(uint32_t AES_IT, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  assert_param(IS_AES_IT(AES_IT));
+
+  if (NewState != DISABLE)
+  {
+    AES->CR |= (uint32_t) AES_IT;    /**< AES_IT Enable */
+  }
+  else
+  {
+    AES->CR &= (uint32_t)(~AES_IT);  /**< AES_IT Disable */
+  }
+}
+
+/**
+  * @brief  Checks whether the specified AES flag is set or not.
+  * @param  AES_FLAG specifies the flag to check.
+  *   This parameter can be one of the following values:
+  *     @arg AES_FLAG_CCF: Computation Complete Flag is set by hardware when
+  *                        he computation phase is completed.
+  *     @arg AES_FLAG_RDERR: Read Error Flag is set when an unexpected read
+  *                          operation of DOUTR register is detected.
+  *     @arg AES_FLAG_WRERR: Write Error Flag  is set when an unexpected write
+  *                          operation in DINR is detected.
+  * @retval FlagStatus (SET or RESET)
+  */
+FlagStatus AES_GetFlagStatus(uint32_t AES_FLAG)
+{
+  FlagStatus bitstatus = RESET;
+
+  /* Check parameters */
+  assert_param(IS_AES_FLAG(AES_FLAG));
+
+  if ((AES->SR & AES_FLAG) != (uint32_t)RESET)
+  {
+    bitstatus = SET;
+  }
+  else
+  {
+    bitstatus = RESET;
+  }
+    
+  /* Return the AES_FLAG status */
+  return  bitstatus;
+}
+
+/**
+  * @brief  Clears the AES flags.
+  * @param  AES_FLAG: specifies the flag to clear.
+  *         This parameter can be:
+  *     @arg AES_FLAG_CCF: Computation Complete Flag is cleared by setting CCFC
+  *                        bit in CR register.
+  *     @arg AES_FLAG_RDERR: Read Error is cleared by setting ERRC bit in 
+  *                          CR register.
+  *     @arg AES_FLAG_WRERR: Write Error is cleared by setting ERRC bit in
+  *                          CR register.
+  * @retval None
+  */
+void AES_ClearFlag(uint32_t AES_FLAG)
+{
+  /* Check the parameters */
+  assert_param(IS_AES_FLAG(AES_FLAG));
+
+  /* Check if AES_FLAG is AES_FLAG_CCF */
+  if (AES_FLAG == AES_FLAG_CCF)
+  {
+    /* Clear CCF flag by setting CCFC bit */
+    AES->CR |= (uint32_t) AES_CR_CCFC;
+  }
+  else /* AES_FLAG is AES_FLAG_RDERR or AES_FLAG_WRERR */
+  {
+    /* Clear RDERR and WRERR flags by setting ERRC bit */
+    AES->CR |= (uint32_t) AES_CR_ERRC;
+  }
+}
+
+/**
+  * @brief  Checks whether the specified AES interrupt has occurred or not.
+  * @param  AES_IT: Specifies the AES interrupt pending bit to check.
+  *         This parameter can be:
+  *     @arg AES_IT_CC: Computation Complete Interrupt.
+  *     @arg AES_IT_ERR: Error Interrupt.
+  * @retval ITStatus The new state of AES_IT (SET or RESET).
+  */
+ITStatus AES_GetITStatus(uint32_t AES_IT)
+{
+  ITStatus itstatus = RESET;
+  uint32_t cciebitstatus = RESET, ccfbitstatus = RESET;
+
+  /* Check parameters */
+  assert_param(IS_AES_GET_IT(AES_IT));
+
+  cciebitstatus = AES->CR & AES_CR_CCIE;
+  ccfbitstatus =  AES->SR & AES_SR_CCF;
+
+  /* Check if AES_IT is AES_IT_CC */
+  if (AES_IT == AES_IT_CC)
+  {
+    /* Check the status of the specified AES interrupt */
+    if (((cciebitstatus) != (uint32_t)RESET) && ((ccfbitstatus) != (uint32_t)RESET))
+    {
+      /* Interrupt occurred */
+      itstatus = SET;
+    }
+    else
+    {
+      /* Interrupt didn't occur */
+      itstatus = RESET;
+    }
+  }
+  else /* AES_IT is AES_IT_ERR */
+  {
+    /* Check the status of the specified AES interrupt */
+    if ((AES->CR & AES_CR_ERRIE) != RESET)
+    {
+      /* Check if WRERR or RDERR flags are set */
+      if ((AES->SR & (uint32_t)(AES_SR_WRERR | AES_SR_RDERR)) != (uint16_t)RESET)
+      {
+        /* Interrupt occurred */
+        itstatus = SET;
+      }
+      else
+      {
+        /* Interrupt didn't occur */
+        itstatus = RESET;
+      }
+    }
+    else
+    {
+      /* Interrupt didn't occur */
+      itstatus = (ITStatus) RESET;
+    }
+  }
+
+  /* Return the AES_IT status */
+  return itstatus;
+}
+
+/**
+  * @brief  Clears the AES's interrupt pending bits.
+  * @param  AES_IT: specifies the interrupt pending bit to clear.
+  *   This parameter can be any combinations of the following values:
+  *     @arg AES_IT_CC: Computation Complete Interrupt.
+  *     @arg AES_IT_ERR: Error Interrupt.
+  * @retval None
+  */
+void AES_ClearITPendingBit(uint32_t AES_IT)
+{
+  /* Check the parameters */
+  assert_param(IS_AES_IT(AES_IT));
+
+  /* Clear the interrupt pending bit */
+  AES->CR |= (uint32_t) (AES_IT >> (uint32_t) 0x00000002);
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/