o Moving tinyprintf and stm libraries under thirdparty.

10 files changed, 925 insertions, 0 deletions

diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/hw_config.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/hw_config.h
new file mode 100644
index 0000000..f23e72a
--- /dev/null
+++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/hw_config.h
@@ -0,0 +1,62 @@
+/**
+  ******************************************************************************
+  * @file    hw_config.h
+  * @author  MCD Application Team
+  * @version V4.0.0
+  * @date    21-January-2013
+  * @brief   Hardware Configuration & Setup
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */
+
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __HW_CONFIG_H
+#define __HW_CONFIG_H
+
+/* Includes ------------------------------------------------------------------*/
+#include "platform_config.h"
+#include "usb_type.h"
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported define -----------------------------------------------------------*/
+#define CURSOR_STEP     20
+
+#define DOWN            2
+#define LEFT            3
+#define RIGHT           4
+#define UP              5
+
+/* Exported functions ------------------------------------------------------- */
+void Set_System(void);
+void Set_USBClock(void);
+void GPIO_AINConfig(void);
+void Enter_LowPowerMode(void);
+void Leave_LowPowerMode(void);
+void USB_Interrupts_Config(void);
+void USB_Cable_Config (FunctionalState NewState);
+void Joystick_Send(uint8_t Keys);
+uint8_t JoyState(void);
+void Get_SerialNum(void);
+
+#endif  /*__HW_CONFIG_H*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/platform_config.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/platform_config.h
new file mode 100644
index 0000000..9bb96d1
--- /dev/null
+++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/platform_config.h
@@ -0,0 +1,216 @@
+/**
+  ******************************************************************************
+  * @file    platform_config.h
+  * @author  MCD Application Team
+  * @version V4.0.0
+  * @date    21-January-2013
+  * @brief   Evaluation board specific configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */
+
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __PLATFORM_CONFIG_H
+#define __PLATFORM_CONFIG_H
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32L1XX_MD) || defined(STM32L1XX_HD)|| defined(STM32L1XX_MD_PLUS)
+ #include "stm32l1xx.h"
+ #if defined (USE_STM32L152_EVAL)
+  #include "stm32l152_eval.h"
+ #elif defined (USE_STM32L152D_EVAL)
+  #include "stm32l152d_eval.h"
+ #else
+  #error "Missing define: USE_STM32L152_EVAL or USE_STM32L152D_EVAL"
+ #endif /* USE_STM32L152_EVAL */
+#elif defined (STM32F10X_MD) || defined (STM32F10X_HD) || defined (STM32F10X_XL)
+ #include "stm32f10x.h"
+ #if defined (USE_STM3210B_EVAL)
+  #include "stm3210b_eval.h"
+ #elif defined (USE_STM3210E_EVAL)
+  #include "stm3210e_eval.h"
+ #else
+  #error "Missing define: USE_STM3210B_EVAL, USE_STM3210E_EVAL"
+ #endif /* USE_STM3210B_EVAL */
+#elif defined (USE_STM32373C_EVAL)
+ #include "stm32f37x.h"
+ #include "stm32373c_eval.h"
+
+#elif defined (USE_STM32303C_EVAL)
+ #include "stm32f30x.h"
+ #include "stm32303c_eval.h"
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Uncomment the line corresponding to the STMicroelectronics evaluation board
+   used to run the example */
+#if !defined (USE_STM3210B_EVAL) &&  !defined (USE_STM3210E_EVAL) &&  !defined (USE_STM32L152_EVAL) &&  !defined (USE_STM32L152D_EVAL)&&  !defined (USE_STM32373C_EVAL) &&  !defined (USE_STM32303C_EVAL)
+ //#define USE_STM3210B_EVAL
+ //#define USE_STM3210E_EVAL
+ //#define USE_STM32L152_EVAL
+//#define USE_STM32L152D_EVAL
+//#define USE_STM32373C_EVAL
+ #define USE_STM32303C_EVAL
+#endif
+
+/*Unique Devices IDs register set*/
+
+#if defined(STM32L1XX_MD) || defined(STM32L1XX_HD) || defined(STM32L1XX_MD_PLUS) 
+
+#define         ID1          (0x1FF80050)
+#define         ID2          (0x1FF80054)
+#define         ID3          (0x1FF80064)
+
+#elif defined (STM32F37X) || defined(STM32F30X)
+
+#define         ID1          (0x1FFFF7AC)
+#define         ID2          (0x1FFFF7B0)
+#define         ID3          (0x1FFFF7B4)
+
+#else /*STM32F1x*/
+
+#define         ID1          (0x1FFFF7E8)
+#define         ID2          (0x1FFFF7EC)
+#define         ID3          (0x1FFFF7F0)
+
+#endif
+
+/* Define the STM32F10x hardware depending on the used evaluation board */
+#ifdef USE_STM3210B_EVAL
+  #define USB_DISCONNECT                      GPIOD  
+  #define USB_DISCONNECT_PIN                  GPIO_Pin_9
+  
+  #define RCC_APB2Periph_GPIO_DISCONNECT      RCC_APB2Periph_GPIOD
+
+  #define RCC_APB2Periph_ALLGPIO              (RCC_APB2Periph_GPIOA \
+                                               | RCC_APB2Periph_GPIOB \
+                                               | RCC_APB2Periph_GPIOC \
+                                               | RCC_APB2Periph_GPIOD \
+                                               | RCC_APB2Periph_GPIOE )
+
+#elif defined (USE_STM3210E_EVAL)
+  #define USB_DISCONNECT                      GPIOB  
+  #define USB_DISCONNECT_PIN                  GPIO_Pin_14
+  #define RCC_APB2Periph_GPIO_DISCONNECT      RCC_APB2Periph_GPIOB
+                                                
+  #define RCC_APB2Periph_ALLGPIO              (RCC_APB2Periph_GPIOA \
+                                               | RCC_APB2Periph_GPIOB \
+                                               | RCC_APB2Periph_GPIOC \
+                                               | RCC_APB2Periph_GPIOD \
+                                               | RCC_APB2Periph_GPIOE \
+                                               | RCC_APB2Periph_GPIOF \
+                                               | RCC_APB2Periph_GPIOG )
+
+#elif defined (USE_STM32L152_EVAL) || defined (USE_STM32L152D_EVAL)
+ /* 
+   For STM32L15xx devices it is possible to use the internal USB pullup
+   controlled by register SYSCFG_PMC (refer to RM0038 reference manual for
+   more details).
+   It is also possible to use external pullup (and disable the internal pullup)
+   by setting the define USB_USE_EXTERNAL_PULLUP in file platform_config.h
+   and configuring the right pin to be used for the external pull up configuration.
+   To have more details on how to use an external pull up, please refer to 
+   STM3210E-EVAL evaluation board manuals.
+   */
+ /* Uncomment the following define to use an external pull up instead of the 
+    integrated STM32L15xx internal pull up. In this case make sure to set up
+    correctly the external required hardware and the GPIO defines below.*/
+/* #define USB_USE_EXTERNAL_PULLUP */
+
+ #if !defined(USB_USE_EXTERNAL_PULLUP)
+  #define STM32L15_USB_CONNECT                SYSCFG_USBPuCmd(ENABLE)
+  #define STM32L15_USB_DISCONNECT             SYSCFG_USBPuCmd(DISABLE)
+
+ #elif defined(USB_USE_EXTERNAL_PULLUP)
+  /* PA0 is chosen just as illustrating example, you should modify the defines
+    below according to your hardware configuration. */
+  #define USB_DISCONNECT                      GPIOA
+  #define USB_DISCONNECT_PIN                  GPIO_Pin_0
+  #define RCC_AHBPeriph_GPIO_DISCONNECT       RCC_AHBPeriph_GPIOA
+  #define STM32L15_USB_CONNECT                GPIO_ResetBits(USB_DISCONNECT, USB_DISCONNECT_PIN)
+  #define STM32L15_USB_DISCONNECT             GPIO_SetBits(USB_DISCONNECT, USB_DISCONNECT_PIN)
+ #endif /* USB_USE_EXTERNAL_PULLUP */
+                                                
+  #define RCC_AHBPeriph_ALLGPIO               (RCC_AHBPeriph_GPIOA \
+                                               | RCC_AHBPeriph_GPIOB \
+                                               | RCC_AHBPeriph_GPIOC \
+                                               | RCC_AHBPeriph_GPIOD \
+                                               | RCC_AHBPeriph_GPIOE \
+										       | RCC_AHBPeriph_GPIOF \
+                                               | RCC_AHBPeriph_GPIOH)
+#elif defined (USE_STM32373C_EVAL)
+
+  #define USB_DISCONNECT                      GPIOC  
+  #define USB_DISCONNECT_PIN                  GPIO_Pin_5
+  #define RCC_AHBPeriph_GPIO_DISCONNECT       RCC_AHBPeriph_GPIOC
+ 
+  #define GPIO_Pin_KEY                        GPIO_Pin_6   /* PE.6 */
+  #define GPIO_Pin_UP                         GPIO_Pin_10  /* PF.10 */
+  #define GPIO_Pin_DOWN                       GPIO_Pin_2  /* PF.2 */
+  #define GPIO_Pin_LEFT                       GPIO_Pin_4  /* PF.4 */
+  #define GPIO_Pin_RIGHT                      GPIO_Pin_9  /* PF.9 */
+  
+  #define RCC_AHBPeriph_GPIO_JOY_SET1        RCC_AHBPeriph_GPIOF
+
+  #define GPIO_RIGHT                          GPIOF
+  #define GPIO_LEFT                           GPIOF
+  #define GPIO_DOWN                           GPIOF
+  #define GPIO_UP                             GPIOF
+  #define GPIO_KEY                            GPIOE
+
+#elif defined (USE_STM32303C_EVAL)
+
+  #define USB_DISCONNECT                      GPIOB  
+  #define USB_DISCONNECT_PIN                  GPIO_Pin_8
+  #define RCC_AHBPeriph_GPIO_DISCONNECT       RCC_AHBPeriph_GPIOB
+
+ 
+  #define GPIO_Pin_KEY                        GPIO_Pin_6   /* PE.6 */
+  #define GPIO_Pin_UP                         GPIO_Pin_7  /* PE.7 */
+  #define GPIO_Pin_DOWN                       GPIO_Pin_5  /* PD.5 */
+  #define GPIO_Pin_LEFT                       GPIO_Pin_5  /* PB.4 */
+  #define GPIO_Pin_RIGHT                      GPIO_Pin_6  /* PD.2 */
+  
+  #define RCC_AHBPeriph_GPIO_JOY_SET1        RCC_AHBPeriph_GPIOF
+
+  #define GPIO_RIGHT                          GPIOD
+  #define GPIO_LEFT                           GPIOB
+  #define GPIO_DOWN                           GPIOD
+  #define GPIO_UP                             GPIOE
+  #define GPIO_KEY                            GPIOE
+
+                                     
+#define RCC_AHBPeriph_ALLGPIO                 (RCC_AHBPeriph_GPIOA \
+                                              | RCC_AHBPeriph_GPIOB \
+                                              | RCC_AHBPeriph_GPIOC \
+                                              | RCC_AHBPeriph_GPIOD \
+                                              | RCC_AHBPeriph_GPIOE \
+                                              | RCC_AHBPeriph_GPIOF )
+#define GPIO_KEY_EXTI_Line                  EXTI_Line18
+#endif /* USE_STM3210B_EVAL */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+#endif /* __PLATFORM_CONFIG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/stm32_it.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/stm32_it.h
new file mode 100644
index 0000000..82d81f2
--- /dev/null
+++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/stm32_it.h
@@ -0,0 +1,58 @@
+/**
+  ******************************************************************************
+  * @file    stm32_it.h
+  * @author  MCD Application Team
+  * @version V4.0.0
+  * @date    21-January-2013
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */
+
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32_IT_H
+#define __STM32_IT_H
+
+/* Includes ------------------------------------------------------------------*/
+#include "platform_config.h"
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+void USB_LP_CAN1_RX0_IRQHandler(void);
+void EXTI9_5_IRQHandler(void);
+void USBWakeUp_IRQHandler(void);
+
+#endif /* __STM32_IT_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
+
diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/stm32f10x_conf.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/stm32f10x_conf.h
new file mode 100644
index 0000000..e08299d
--- /dev/null
+++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/stm32f10x_conf.h
@@ -0,0 +1,85 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_conf.h
+  * @author  MCD Application Team
+  * @version V4.0.0
+  * @date    21-January-2013
+  * @brief   Library configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */
+
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CONF_H
+#define __STM32F10x_CONF_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Uncomment the line below to enable peripheral header file inclusion */
+#include "stm32f10x_adc.h"
+#include "stm32f10x_bkp.h"
+#include "stm32f10x_can.h"
+#include "stm32f10x_crc.h"
+#include "stm32f10x_dac.h"
+#include "stm32f10x_dbgmcu.h"
+#include "stm32f10x_dma.h"
+#include "stm32f10x_exti.h"
+#include "stm32f10x_flash.h"
+#include "stm32f10x_fsmc.h"
+#include "stm32f10x_gpio.h"
+#include "stm32f10x_i2c.h" 
+#include "stm32f10x_iwdg.h"
+#include "stm32f10x_pwr.h"
+#include "stm32f10x_rcc.h"
+#include "stm32f10x_rtc.h"
+#include "stm32f10x_sdio.h"
+#include "stm32f10x_spi.h"
+#include "stm32f10x_tim.h"
+#include "stm32f10x_usart.h"
+#include "stm32f10x_wwdg.h"
+#include "misc.h"   /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Uncomment the line below to expanse the "assert_param" macro in the 
+   Standard Peripheral Library drivers code */
+/* #define USE_FULL_ASSERT    1 */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+
+/*******************************************************************************
+* Macro Name     : assert_param
+* Description    : The assert_param macro is used for function's parameters check.
+* Input          : - expr: If expr is false, it calls assert_failed function
+*                    which reports the name of the source file and the source
+*                    line number of the call that failed. 
+*                    If expr is true, it returns no value.
+* Return         : None
+*******************************************************************************/ 
+  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+#endif /* __STM32F10x_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/stm32f37x_conf.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/stm32f37x_conf.h
new file mode 100644
index 0000000..3d39101
--- /dev/null
+++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/stm32f37x_conf.h
@@ -0,0 +1,83 @@
+/**
+  ******************************************************************************
+  * @file    stm32f37x_conf.h 
+  * @author  MCD Application Team
+  * @version V4.0.0
+  * @date    21-January-2013
+  * @brief   Library configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F37X_CONF_H
+#define __STM32F37X_CONF_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Comment the line below to disable peripheral header file inclusion */
+#include "stm32f37x_adc.h"
+#include "stm32f37x_can.h"
+#include "stm32f37x_cec.h"
+#include "stm32f37x_crc.h"
+#include "stm32f37x_comp.h"
+#include "stm32f37x_dac.h"
+#include "stm32f37x_dbgmcu.h"
+#include "stm32f37x_dma.h"
+#include "stm32f37x_exti.h"
+#include "stm32f37x_flash.h"
+#include "stm32f37x_gpio.h"
+#include "stm32f37x_syscfg.h"
+#include "stm32f37x_i2c.h"
+#include "stm32f37x_iwdg.h"
+#include "stm32f37x_pwr.h"
+#include "stm32f37x_rcc.h"
+#include "stm32f37x_rtc.h"
+#include "stm32f37x_sdadc.h"
+#include "stm32f37x_spi.h"
+#include "stm32f37x_tim.h"
+#include "stm32f37x_usart.h"
+#include "stm32f37x_wwdg.h"
+#include "stm32f37x_misc.h"  /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Uncomment the line below to expanse the "assert_param" macro in the 
+   Standard Peripheral Library drivers code */
+/* #define USE_FULL_ASSERT    1 */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function which reports 
+  *         the name of the source file and the source line number of the call 
+  *         that failed. If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+#endif /* __STM32F37X_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/stm32l1xx_conf.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/stm32l1xx_conf.h
new file mode 100644
index 0000000..ae4a251
--- /dev/null
+++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/stm32l1xx_conf.h
@@ -0,0 +1,82 @@
+/**
+  ******************************************************************************
+  * @file    stm32l1xx_conf.h 
+  * @author  MCD Application Team
+  * @version V4.0.0
+  * @date    21-January-2013
+  * @brief   Library configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L1xx_CONF_H
+#define __STM32L1xx_CONF_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Uncomment the line below to enable peripheral header file inclusion */
+#include "stm32l1xx_adc.h"
+#include "stm32l1xx_crc.h"
+#include "stm32l1xx_comp.h"
+#include "stm32l1xx_dac.h" 
+#include "stm32l1xx_dbgmcu.h"
+#include "stm32l1xx_dma.h"
+#include "stm32l1xx_exti.h"
+#include "stm32l1xx_flash.h"
+#include "stm32l1xx_gpio.h"
+#include "stm32l1xx_syscfg.h"
+#include "stm32l1xx_i2c.h"
+#include "stm32l1xx_iwdg.h"
+#include "stm32l1xx_lcd.h"
+#include "stm32l1xx_pwr.h"
+#include "stm32l1xx_rcc.h"
+#include "stm32l1xx_rtc.h"
+#include "stm32l1xx_spi.h"
+#include "stm32l1xx_tim.h" 
+#include "stm32l1xx_usart.h"
+#include "stm32l1xx_wwdg.h"
+#include "misc.h"  /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Uncomment the line below to expanse the "assert_param" macro in the 
+   Standard Peripheral Library drivers code */
+/* #define USE_FULL_ASSERT    1 */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param expr: If expr is false, it calls assert_failed function
+  *   which reports the name of the source file and the source
+  *   line number of the call that failed. 
+  *   If expr is true, it returns no value.
+  * @retval : None
+  */
+  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+#endif /* __STM32L1xx_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/usb_conf.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/usb_conf.h
new file mode 100644
index 0000000..ff5541b
--- /dev/null
+++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/usb_conf.h
@@ -0,0 +1,91 @@
+/**
+  ******************************************************************************
+  * @file    usb_conf.h
+  * @author  MCD Application Team
+  * @version V4.0.0
+  * @date    21-January-2013
+  * @brief   Joystick Mouse demo configuration file
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */
+
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_CONF_H
+#define __USB_CONF_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+/* External variables --------------------------------------------------------*/
+/*-------------------------------------------------------------*/
+/* EP_NUM */
+/* defines how many endpoints are used by the device */
+/*-------------------------------------------------------------*/
+#define EP_NUM     (2)
+
+/*-------------------------------------------------------------*/
+/* --------------   Buffer Description Table  -----------------*/
+/*-------------------------------------------------------------*/
+/* buffer table base address */
+/* buffer table base address */
+#define BTABLE_ADDRESS      (0x00)
+
+/* EP0  */
+/* rx/tx buffer base address */
+#define ENDP0_RXADDR        (0x18)
+#define ENDP0_TXADDR        (0x58)
+
+/* EP1  */
+/* tx buffer base address */
+#define ENDP1_TXADDR        (0x100)
+
+
+/*-------------------------------------------------------------*/
+/* -------------------   ISTR events  -------------------------*/
+/*-------------------------------------------------------------*/
+/* IMR_MSK */
+/* mask defining which events has to be handled */
+/* by the device application software */
+#define IMR_MSK (CNTR_CTRM  | CNTR_WKUPM | CNTR_SUSPM | CNTR_ERRM  | CNTR_SOFM \
+                 | CNTR_ESOFM | CNTR_RESETM )
+
+/* CTR service routines */
+/* associated to defined endpoints */
+/* #define  EP1_IN_Callback   NOP_Process*/
+#define  EP2_IN_Callback   NOP_Process
+#define  EP3_IN_Callback   NOP_Process
+#define  EP4_IN_Callback   NOP_Process
+#define  EP5_IN_Callback   NOP_Process
+#define  EP6_IN_Callback   NOP_Process
+#define  EP7_IN_Callback   NOP_Process
+
+#define  EP1_OUT_Callback   NOP_Process
+#define  EP2_OUT_Callback   NOP_Process
+#define  EP3_OUT_Callback   NOP_Process
+#define  EP4_OUT_Callback   NOP_Process
+#define  EP5_OUT_Callback   NOP_Process
+#define  EP6_OUT_Callback   NOP_Process
+#define  EP7_OUT_Callback   NOP_Process
+
+#endif /*__USB_CONF_H*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/usb_istr.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/usb_istr.h
new file mode 100644
index 0000000..d2a07f6
--- /dev/null
+++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/usb_istr.h
@@ -0,0 +1,95 @@
+/**
+  ******************************************************************************
+  * @file    usb_istr.h
+  * @author  MCD Application Team
+  * @version V4.0.0
+  * @date    21-January-2013
+  * @brief   This file includes the peripherals header files in the user application.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */
+
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_ISTR_H
+#define __USB_ISTR_H
+
+/* Includes ------------------------------------------------------------------*/
+#include "usb_conf.h"
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+ void USB_Istr(void);
+
+/* function prototypes Automatically built defining related macros */
+
+void EP1_IN_Callback(void);
+void EP2_IN_Callback(void);
+void EP3_IN_Callback(void);
+void EP4_IN_Callback(void);
+void EP5_IN_Callback(void);
+void EP6_IN_Callback(void);
+void EP7_IN_Callback(void);
+
+void EP1_OUT_Callback(void);
+void EP2_OUT_Callback(void);
+void EP3_OUT_Callback(void);
+void EP4_OUT_Callback(void);
+void EP5_OUT_Callback(void);
+void EP6_OUT_Callback(void);
+void EP7_OUT_Callback(void);
+
+#ifdef CTR_CALLBACK
+void CTR_Callback(void);
+#endif
+
+#ifdef DOVR_CALLBACK
+void DOVR_Callback(void);
+#endif
+
+#ifdef ERR_CALLBACK
+void ERR_Callback(void);
+#endif
+
+#ifdef WKUP_CALLBACK
+void WKUP_Callback(void);
+#endif
+
+#ifdef SUSP_CALLBACK
+void SUSP_Callback(void);
+#endif
+
+#ifdef RESET_CALLBACK
+void RESET_Callback(void);
+#endif
+
+#ifdef SOF_CALLBACK
+void SOF_Callback(void);
+#endif
+
+#ifdef ESOF_CALLBACK
+void ESOF_Callback(void);
+#endif
+
+#endif /*__USB_ISTR_H*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/usb_prop.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/usb_prop.h
new file mode 100644
index 0000000..f228ad2
--- /dev/null
+++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/usb_prop.h
@@ -0,0 +1,82 @@
+/**
+  ******************************************************************************
+  * @file    usb_prop.h
+  * @author  MCD Application Team
+  * @version V4.0.0
+  * @date    21-January-2013
+  * @brief   All processing related to Joystick Mouse demo
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */
+
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_PROP_H
+#define __USB_PROP_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+typedef enum _HID_REQUESTS
+{
+  GET_REPORT = 1,
+  GET_IDLE,
+  GET_PROTOCOL,
+
+  SET_REPORT = 9,
+  SET_IDLE,
+  SET_PROTOCOL
+} HID_REQUESTS;
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+void Joystick_init(void);
+void Joystick_Reset(void);
+void Joystick_SetConfiguration(void);
+void Joystick_SetDeviceAddress (void);
+void Joystick_Status_In (void);
+void Joystick_Status_Out (void);
+RESULT Joystick_Data_Setup(uint8_t);
+RESULT Joystick_NoData_Setup(uint8_t);
+RESULT Joystick_Get_Interface_Setting(uint8_t Interface, uint8_t AlternateSetting);
+uint8_t *Joystick_GetDeviceDescriptor(uint16_t );
+uint8_t *Joystick_GetConfigDescriptor(uint16_t);
+uint8_t *Joystick_GetStringDescriptor(uint16_t);
+RESULT Joystick_SetProtocol(void);
+uint8_t *Joystick_GetProtocolValue(uint16_t Length);
+RESULT Joystick_SetProtocol(void);
+uint8_t *Joystick_GetReportDescriptor(uint16_t Length);
+uint8_t *Joystick_GetHIDDescriptor(uint16_t Length);
+
+/* Exported define -----------------------------------------------------------*/
+#define Joystick_GetConfiguration          NOP_Process
+//#define Joystick_SetConfiguration          NOP_Process
+#define Joystick_GetInterface              NOP_Process
+#define Joystick_SetInterface              NOP_Process
+#define Joystick_GetStatus                 NOP_Process
+#define Joystick_ClearFeature              NOP_Process
+#define Joystick_SetEndPointFeature        NOP_Process
+#define Joystick_SetDeviceFeature          NOP_Process
+//#define Joystick_SetDeviceAddress          NOP_Process
+
+#define REPORT_DESCRIPTOR                  0x22
+
+#endif /* __USB_PROP_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/usb_pwr.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/usb_pwr.h
new file mode 100644
index 0000000..31891f1
--- /dev/null
+++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/JoyStickMouse/inc/usb_pwr.h
@@ -0,0 +1,71 @@
+/**
+  ******************************************************************************
+  * @file    usb_pwr.h
+  * @author  MCD Application Team
+  * @version V4.0.0
+  * @date    21-January-2013
+  * @brief   Connection/disconnection & power management header
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */
+
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_PWR_H
+#define __USB_PWR_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+typedef enum _RESUME_STATE
+{
+  RESUME_EXTERNAL,
+  RESUME_INTERNAL,
+  RESUME_LATER,
+  RESUME_WAIT,
+  RESUME_START,
+  RESUME_ON,
+  RESUME_OFF,
+  RESUME_ESOF
+} RESUME_STATE;
+
+typedef enum _DEVICE_STATE
+{
+  UNCONNECTED,
+  ATTACHED,
+  POWERED,
+  SUSPENDED,
+  ADDRESSED,
+  CONFIGURED
+} DEVICE_STATE;
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+void Suspend(void);
+void Resume_Init(void);
+void Resume(RESUME_STATE eResumeSetVal);
+RESULT PowerOn(void);
+RESULT PowerOff(void);
+/* External variables --------------------------------------------------------*/
+extern  __IO uint32_t bDeviceState; /* USB device status */
+extern __IO bool fSuspendEnabled;  /* true when suspend is possible */
+
+#endif  /*__USB_PWR_H*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/