o Seemingly working Mutexes.

o Dropping the privileged/unprivileged split for now.

1 files changed, 0 insertions, 571 deletions

diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dac.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dac.c
deleted file mode 100644
index 1cfc71d..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dac.c
+++ /dev/null
@@ -1,571 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f10x_dac.c
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    11-March-2011
-  * @brief   This file provides all the DAC firmware functions.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_dac.h"
-#include "stm32f10x_rcc.h"
-
-/** @addtogroup STM32F10x_StdPeriph_Driver
-  * @{
-  */
-
-/** @defgroup DAC 
-  * @brief DAC driver modules
-  * @{
-  */ 
-
-/** @defgroup DAC_Private_TypesDefinitions
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @defgroup DAC_Private_Defines
-  * @{
-  */
-
-/* CR register Mask */
-#define CR_CLEAR_MASK              ((uint32_t)0x00000FFE)
-
-/* DAC Dual Channels SWTRIG masks */
-#define DUAL_SWTRIG_SET            ((uint32_t)0x00000003)
-#define DUAL_SWTRIG_RESET          ((uint32_t)0xFFFFFFFC)
-
-/* DHR registers offsets */
-#define DHR12R1_OFFSET             ((uint32_t)0x00000008)
-#define DHR12R2_OFFSET             ((uint32_t)0x00000014)
-#define DHR12RD_OFFSET             ((uint32_t)0x00000020)
-
-/* DOR register offset */
-#define DOR_OFFSET                 ((uint32_t)0x0000002C)
-/**
-  * @}
-  */
-
-/** @defgroup DAC_Private_Macros
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @defgroup DAC_Private_Variables
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @defgroup DAC_Private_FunctionPrototypes
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @defgroup DAC_Private_Functions
-  * @{
-  */
-
-/**
-  * @brief  Deinitializes the DAC peripheral registers to their default reset values.
-  * @param  None
-  * @retval None
-  */
-void DAC_DeInit(void)
-{
-  /* Enable DAC reset state */
-  RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, ENABLE);
-  /* Release DAC from reset state */
-  RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, DISABLE);
-}
-
-/**
-  * @brief  Initializes the DAC peripheral according to the specified 
-  *         parameters in the DAC_InitStruct.
-  * @param  DAC_Channel: the selected DAC channel. 
-  *   This parameter can be one of the following values:
-  *     @arg DAC_Channel_1: DAC Channel1 selected
-  *     @arg DAC_Channel_2: DAC Channel2 selected
-  * @param  DAC_InitStruct: pointer to a DAC_InitTypeDef structure that
-  *        contains the configuration information for the specified DAC channel.
-  * @retval None
-  */
-void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct)
-{
-  uint32_t tmpreg1 = 0, tmpreg2 = 0;
-  /* Check the DAC parameters */
-  assert_param(IS_DAC_TRIGGER(DAC_InitStruct->DAC_Trigger));
-  assert_param(IS_DAC_GENERATE_WAVE(DAC_InitStruct->DAC_WaveGeneration));
-  assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude));
-  assert_param(IS_DAC_OUTPUT_BUFFER_STATE(DAC_InitStruct->DAC_OutputBuffer));
-/*---------------------------- DAC CR Configuration --------------------------*/
-  /* Get the DAC CR value */
-  tmpreg1 = DAC->CR;
-  /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */
-  tmpreg1 &= ~(CR_CLEAR_MASK << DAC_Channel);
-  /* Configure for the selected DAC channel: buffer output, trigger, wave generation,
-     mask/amplitude for wave generation */
-  /* Set TSELx and TENx bits according to DAC_Trigger value */
-  /* Set WAVEx bits according to DAC_WaveGeneration value */
-  /* Set MAMPx bits according to DAC_LFSRUnmask_TriangleAmplitude value */ 
-  /* Set BOFFx bit according to DAC_OutputBuffer value */   
-  tmpreg2 = (DAC_InitStruct->DAC_Trigger | DAC_InitStruct->DAC_WaveGeneration |
-             DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude | DAC_InitStruct->DAC_OutputBuffer);
-  /* Calculate CR register value depending on DAC_Channel */
-  tmpreg1 |= tmpreg2 << DAC_Channel;
-  /* Write to DAC CR */
-  DAC->CR = tmpreg1;
-}
-
-/**
-  * @brief  Fills each DAC_InitStruct member with its default value.
-  * @param  DAC_InitStruct : pointer to a DAC_InitTypeDef structure which will
-  *         be initialized.
-  * @retval None
-  */
-void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct)
-{
-/*--------------- Reset DAC init structure parameters values -----------------*/
-  /* Initialize the DAC_Trigger member */
-  DAC_InitStruct->DAC_Trigger = DAC_Trigger_None;
-  /* Initialize the DAC_WaveGeneration member */
-  DAC_InitStruct->DAC_WaveGeneration = DAC_WaveGeneration_None;
-  /* Initialize the DAC_LFSRUnmask_TriangleAmplitude member */
-  DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude = DAC_LFSRUnmask_Bit0;
-  /* Initialize the DAC_OutputBuffer member */
-  DAC_InitStruct->DAC_OutputBuffer = DAC_OutputBuffer_Enable;
-}
-
-/**
-  * @brief  Enables or disables the specified DAC channel.
-  * @param  DAC_Channel: the selected DAC channel. 
-  *   This parameter can be one of the following values:
-  *     @arg DAC_Channel_1: DAC Channel1 selected
-  *     @arg DAC_Channel_2: DAC Channel2 selected
-  * @param  NewState: new state of the DAC channel. 
-  *   This parameter can be: ENABLE or DISABLE.
-  * @retval None
-  */
-void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState)
-{
-  /* Check the parameters */
-  assert_param(IS_DAC_CHANNEL(DAC_Channel));
-  assert_param(IS_FUNCTIONAL_STATE(NewState));
-  if (NewState != DISABLE)
-  {
-    /* Enable the selected DAC channel */
-    DAC->CR |= (DAC_CR_EN1 << DAC_Channel);
-  }
-  else
-  {
-    /* Disable the selected DAC channel */
-    DAC->CR &= ~(DAC_CR_EN1 << DAC_Channel);
-  }
-}
-#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
-/**
-  * @brief  Enables or disables the specified DAC interrupts.
-  * @param  DAC_Channel: the selected DAC channel. 
-  *   This parameter can be one of the following values:
-  *     @arg DAC_Channel_1: DAC Channel1 selected
-  *     @arg DAC_Channel_2: DAC Channel2 selected
-  * @param  DAC_IT: specifies the DAC interrupt sources to be enabled or disabled. 
-  *   This parameter can be the following values:
-  *     @arg DAC_IT_DMAUDR: DMA underrun interrupt mask                      
-  * @param  NewState: new state of the specified DAC interrupts.
-  *   This parameter can be: ENABLE or DISABLE.
-  * @retval None
-  */ 
-void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState)  
-{
-  /* Check the parameters */
-  assert_param(IS_DAC_CHANNEL(DAC_Channel));
-  assert_param(IS_FUNCTIONAL_STATE(NewState));
-  assert_param(IS_DAC_IT(DAC_IT)); 
-
-  if (NewState != DISABLE)
-  {
-    /* Enable the selected DAC interrupts */
-    DAC->CR |=  (DAC_IT << DAC_Channel);
-  }
-  else
-  {
-    /* Disable the selected DAC interrupts */
-    DAC->CR &= (~(uint32_t)(DAC_IT << DAC_Channel));
-  }
-}
-#endif
-
-/**
-  * @brief  Enables or disables the specified DAC channel DMA request.
-  * @param  DAC_Channel: the selected DAC channel. 
-  *   This parameter can be one of the following values:
-  *     @arg DAC_Channel_1: DAC Channel1 selected
-  *     @arg DAC_Channel_2: DAC Channel2 selected
-  * @param  NewState: new state of the selected DAC channel DMA request.
-  *   This parameter can be: ENABLE or DISABLE.
-  * @retval None
-  */
-void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState)
-{
-  /* Check the parameters */
-  assert_param(IS_DAC_CHANNEL(DAC_Channel));
-  assert_param(IS_FUNCTIONAL_STATE(NewState));
-  if (NewState != DISABLE)
-  {
-    /* Enable the selected DAC channel DMA request */
-    DAC->CR |= (DAC_CR_DMAEN1 << DAC_Channel);
-  }
-  else
-  {
-    /* Disable the selected DAC channel DMA request */
-    DAC->CR &= ~(DAC_CR_DMAEN1 << DAC_Channel);
-  }
-}
-
-/**
-  * @brief  Enables or disables the selected DAC channel software trigger.
-  * @param  DAC_Channel: the selected DAC channel. 
-  *   This parameter can be one of the following values:
-  *     @arg DAC_Channel_1: DAC Channel1 selected
-  *     @arg DAC_Channel_2: DAC Channel2 selected
-  * @param  NewState: new state of the selected DAC channel software trigger.
-  *   This parameter can be: ENABLE or DISABLE.
-  * @retval None
-  */
-void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState)
-{
-  /* Check the parameters */
-  assert_param(IS_DAC_CHANNEL(DAC_Channel));
-  assert_param(IS_FUNCTIONAL_STATE(NewState));
-  if (NewState != DISABLE)
-  {
-    /* Enable software trigger for the selected DAC channel */
-    DAC->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4);
-  }
-  else
-  {
-    /* Disable software trigger for the selected DAC channel */
-    DAC->SWTRIGR &= ~((uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4));
-  }
-}
-
-/**
-  * @brief  Enables or disables simultaneously the two DAC channels software
-  *   triggers.
-  * @param  NewState: new state of the DAC channels software triggers.
-  *   This parameter can be: ENABLE or DISABLE.
-  * @retval None
-  */
-void DAC_DualSoftwareTriggerCmd(FunctionalState NewState)
-{
-  /* Check the parameters */
-  assert_param(IS_FUNCTIONAL_STATE(NewState));
-  if (NewState != DISABLE)
-  {
-    /* Enable software trigger for both DAC channels */
-    DAC->SWTRIGR |= DUAL_SWTRIG_SET ;
-  }
-  else
-  {
-    /* Disable software trigger for both DAC channels */
-    DAC->SWTRIGR &= DUAL_SWTRIG_RESET;
-  }
-}
-
-/**
-  * @brief  Enables or disables the selected DAC channel wave generation.
-  * @param  DAC_Channel: the selected DAC channel. 
-  *   This parameter can be one of the following values:
-  *     @arg DAC_Channel_1: DAC Channel1 selected
-  *     @arg DAC_Channel_2: DAC Channel2 selected
-  * @param  DAC_Wave: Specifies the wave type to enable or disable.
-  *   This parameter can be one of the following values:
-  *     @arg DAC_Wave_Noise: noise wave generation
-  *     @arg DAC_Wave_Triangle: triangle wave generation
-  * @param  NewState: new state of the selected DAC channel wave generation.
-  *   This parameter can be: ENABLE or DISABLE.
-  * @retval None
-  */
-void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState)
-{
-  /* Check the parameters */
-  assert_param(IS_DAC_CHANNEL(DAC_Channel));
-  assert_param(IS_DAC_WAVE(DAC_Wave)); 
-  assert_param(IS_FUNCTIONAL_STATE(NewState));
-  if (NewState != DISABLE)
-  {
-    /* Enable the selected wave generation for the selected DAC channel */
-    DAC->CR |= DAC_Wave << DAC_Channel;
-  }
-  else
-  {
-    /* Disable the selected wave generation for the selected DAC channel */
-    DAC->CR &= ~(DAC_Wave << DAC_Channel);
-  }
-}
-
-/**
-  * @brief  Set the specified data holding register value for DAC channel1.
-  * @param  DAC_Align: Specifies the data alignment for DAC channel1.
-  *   This parameter can be one of the following values:
-  *     @arg DAC_Align_8b_R: 8bit right data alignment selected
-  *     @arg DAC_Align_12b_L: 12bit left data alignment selected
-  *     @arg DAC_Align_12b_R: 12bit right data alignment selected
-  * @param  Data : Data to be loaded in the selected data holding register.
-  * @retval None
-  */
-void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data)
-{  
-  __IO uint32_t tmp = 0;
-  
-  /* Check the parameters */
-  assert_param(IS_DAC_ALIGN(DAC_Align));
-  assert_param(IS_DAC_DATA(Data));
-  
-  tmp = (uint32_t)DAC_BASE; 
-  tmp += DHR12R1_OFFSET + DAC_Align;
-
-  /* Set the DAC channel1 selected data holding register */
-  *(__IO uint32_t *) tmp = Data;
-}
-
-/**
-  * @brief  Set the specified data holding register value for DAC channel2.
-  * @param  DAC_Align: Specifies the data alignment for DAC channel2.
-  *   This parameter can be one of the following values:
-  *     @arg DAC_Align_8b_R: 8bit right data alignment selected
-  *     @arg DAC_Align_12b_L: 12bit left data alignment selected
-  *     @arg DAC_Align_12b_R: 12bit right data alignment selected
-  * @param  Data : Data to be loaded in the selected data holding register.
-  * @retval None
-  */
-void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data)
-{
-  __IO uint32_t tmp = 0;
-
-  /* Check the parameters */
-  assert_param(IS_DAC_ALIGN(DAC_Align));
-  assert_param(IS_DAC_DATA(Data));
-  
-  tmp = (uint32_t)DAC_BASE;
-  tmp += DHR12R2_OFFSET + DAC_Align;
-
-  /* Set the DAC channel2 selected data holding register */
-  *(__IO uint32_t *)tmp = Data;
-}
-
-/**
-  * @brief  Set the specified data holding register value for dual channel
-  *   DAC.
-  * @param  DAC_Align: Specifies the data alignment for dual channel DAC.
-  *   This parameter can be one of the following values:
-  *     @arg DAC_Align_8b_R: 8bit right data alignment selected
-  *     @arg DAC_Align_12b_L: 12bit left data alignment selected
-  *     @arg DAC_Align_12b_R: 12bit right data alignment selected
-  * @param  Data2: Data for DAC Channel2 to be loaded in the selected data 
-  *   holding register.
-  * @param  Data1: Data for DAC Channel1 to be loaded in the selected data 
-  *   holding register.
-  * @retval None
-  */
-void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1)
-{
-  uint32_t data = 0, tmp = 0;
-  
-  /* Check the parameters */
-  assert_param(IS_DAC_ALIGN(DAC_Align));
-  assert_param(IS_DAC_DATA(Data1));
-  assert_param(IS_DAC_DATA(Data2));
-  
-  /* Calculate and set dual DAC data holding register value */
-  if (DAC_Align == DAC_Align_8b_R)
-  {
-    data = ((uint32_t)Data2 << 8) | Data1; 
-  }
-  else
-  {
-    data = ((uint32_t)Data2 << 16) | Data1;
-  }
-  
-  tmp = (uint32_t)DAC_BASE;
-  tmp += DHR12RD_OFFSET + DAC_Align;
-
-  /* Set the dual DAC selected data holding register */
-  *(__IO uint32_t *)tmp = data;
-}
-
-/**
-  * @brief  Returns the last data output value of the selected DAC channel.
-  * @param  DAC_Channel: the selected DAC channel. 
-  *   This parameter can be one of the following values:
-  *     @arg DAC_Channel_1: DAC Channel1 selected
-  *     @arg DAC_Channel_2: DAC Channel2 selected
-  * @retval The selected DAC channel data output value.
-  */
-uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel)
-{
-  __IO uint32_t tmp = 0;
-  
-  /* Check the parameters */
-  assert_param(IS_DAC_CHANNEL(DAC_Channel));
-  
-  tmp = (uint32_t) DAC_BASE ;
-  tmp += DOR_OFFSET + ((uint32_t)DAC_Channel >> 2);
-  
-  /* Returns the DAC channel data output register value */
-  return (uint16_t) (*(__IO uint32_t*) tmp);
-}
-
-#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
-/**
-  * @brief  Checks whether the specified DAC flag is set or not.
-  * @param  DAC_Channel: thee selected DAC channel. 
-  *   This parameter can be one of the following values:
-  *     @arg DAC_Channel_1: DAC Channel1 selected
-  *     @arg DAC_Channel_2: DAC Channel2 selected
-  * @param  DAC_FLAG: specifies the flag to check. 
-  *   This parameter can be only of the following value:
-  *     @arg DAC_FLAG_DMAUDR: DMA underrun flag                                                 
-  * @retval The new state of DAC_FLAG (SET or RESET).
-  */
-FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG)
-{
-  FlagStatus bitstatus = RESET;
-  /* Check the parameters */
-  assert_param(IS_DAC_CHANNEL(DAC_Channel));
-  assert_param(IS_DAC_FLAG(DAC_FLAG));
-
-  /* Check the status of the specified DAC flag */
-  if ((DAC->SR & (DAC_FLAG << DAC_Channel)) != (uint8_t)RESET)
-  {
-    /* DAC_FLAG is set */
-    bitstatus = SET;
-  }
-  else
-  {
-    /* DAC_FLAG is reset */
-    bitstatus = RESET;
-  }
-  /* Return the DAC_FLAG status */
-  return  bitstatus;
-}
-
-/**
-  * @brief  Clears the DAC channelx's pending flags.
-  * @param  DAC_Channel: the selected DAC channel. 
-  *   This parameter can be one of the following values:
-  *     @arg DAC_Channel_1: DAC Channel1 selected
-  *     @arg DAC_Channel_2: DAC Channel2 selected
-  * @param  DAC_FLAG: specifies the flag to clear. 
-  *   This parameter can be of the following value:
-  *     @arg DAC_FLAG_DMAUDR: DMA underrun flag                           
-  * @retval None
-  */
-void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG)
-{
-  /* Check the parameters */
-  assert_param(IS_DAC_CHANNEL(DAC_Channel));
-  assert_param(IS_DAC_FLAG(DAC_FLAG));
-
-  /* Clear the selected DAC flags */
-  DAC->SR = (DAC_FLAG << DAC_Channel);
-}
-
-/**
-  * @brief  Checks whether the specified DAC interrupt has occurred or not.
-  * @param  DAC_Channel: the selected DAC channel. 
-  *   This parameter can be one of the following values:
-  *     @arg DAC_Channel_1: DAC Channel1 selected
-  *     @arg DAC_Channel_2: DAC Channel2 selected
-  * @param  DAC_IT: specifies the DAC interrupt source to check. 
-  *   This parameter can be the following values:
-  *     @arg DAC_IT_DMAUDR: DMA underrun interrupt mask                       
-  * @retval The new state of DAC_IT (SET or RESET).
-  */
-ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT)
-{
-  ITStatus bitstatus = RESET;
-  uint32_t enablestatus = 0;
-  
-  /* Check the parameters */
-  assert_param(IS_DAC_CHANNEL(DAC_Channel));
-  assert_param(IS_DAC_IT(DAC_IT));
-
-  /* Get the DAC_IT enable bit status */
-  enablestatus = (DAC->CR & (DAC_IT << DAC_Channel)) ;
-  
-  /* Check the status of the specified DAC interrupt */
-  if (((DAC->SR & (DAC_IT << DAC_Channel)) != (uint32_t)RESET) && enablestatus)
-  {
-    /* DAC_IT is set */
-    bitstatus = SET;
-  }
-  else
-  {
-    /* DAC_IT is reset */
-    bitstatus = RESET;
-  }
-  /* Return the DAC_IT status */
-  return  bitstatus;
-}
-
-/**
-  * @brief  Clears the DAC channelx's interrupt pending bits.
-  * @param  DAC_Channel: the selected DAC channel. 
-  *   This parameter can be one of the following values:
-  *     @arg DAC_Channel_1: DAC Channel1 selected
-  *     @arg DAC_Channel_2: DAC Channel2 selected
-  * @param  DAC_IT: specifies the DAC interrupt pending bit to clear.
-  *   This parameter can be the following values:
-  *     @arg DAC_IT_DMAUDR: DMA underrun interrupt mask                         
-  * @retval None
-  */
-void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT)
-{
-  /* Check the parameters */
-  assert_param(IS_DAC_CHANNEL(DAC_Channel));
-  assert_param(IS_DAC_IT(DAC_IT)); 
-
-  /* Clear the selected DAC interrupt pending bits */
-  DAC->SR = (DAC_IT << DAC_Channel);
-}
-#endif
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/