diff options
Diffstat (limited to 'thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/CMSIS/Device/ST/STM32F37x/Source')
4 files changed, 1781 insertions, 0 deletions
diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/CMSIS/Device/ST/STM32F37x/Source/Templates/TrueSTUDIO/startup_stm32f37x.s b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/CMSIS/Device/ST/STM32F37x/Source/Templates/TrueSTUDIO/startup_stm32f37x.s new file mode 100644 index 0000000..30da828 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/CMSIS/Device/ST/STM32F37x/Source/Templates/TrueSTUDIO/startup_stm32f37x.s @@ -0,0 +1,463 @@ +/** + ****************************************************************************** + * @file startup_stm32f37x.s + * @author MCD Application Team + * @version V1.0.0 + * @date 20-September-2012 + * @brief stm32f37x vector table for Atollic TrueSTUDIO toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address, + * - Configure the clock system + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M4 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m4 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + +.equ BootRAM, 0xF1E0F85F +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2], #4 + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + +LoopForever: + b LoopForever + +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex-M4. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler + .word PVD_IRQHandler + .word TAMPER_STAMP_IRQHandler + .word RTC_WKUP_IRQHandler + .word FLASH_IRQHandler + .word RCC_IRQHandler + .word EXTI0_IRQHandler + .word EXTI1_IRQHandler + .word EXTI2_TS_IRQHandler + .word EXTI3_IRQHandler + .word EXTI4_IRQHandler + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_IRQHandler + .word DMA1_Channel3_IRQHandler + .word DMA1_Channel4_IRQHandler + .word DMA1_Channel5_IRQHandler + .word DMA1_Channel6_IRQHandler + .word DMA1_Channel7_IRQHandler + .word ADC1_IRQHandler + .word CAN1_TX_IRQHandler + .word CAN1_RX0_IRQHandler + .word CAN1_RX1_IRQHandler + .word CAN1_SCE_IRQHandler + .word EXTI9_5_IRQHandler + .word TIM15_IRQHandler + .word TIM16_IRQHandler + .word TIM17_IRQHandler + .word TIM18_DAC2_IRQHandler + .word TIM2_IRQHandler + .word TIM3_IRQHandler + .word TIM4_IRQHandler + .word I2C1_EV_IRQHandler + .word I2C1_ER_IRQHandler + .word I2C2_EV_IRQHandler + .word I2C2_ER_IRQHandler + .word SPI1_IRQHandler + .word SPI2_IRQHandler + .word USART1_IRQHandler + .word USART2_IRQHandler + .word USART3_IRQHandler + .word EXTI15_10_IRQHandler + .word RTC_Alarm_IRQHandler + .word CEC_IRQHandler + .word TIM12_IRQHandler + .word TIM13_IRQHandler + .word TIM14_IRQHandler + .word 0 + .word 0 + .word 0 + .word 0 + .word TIM5_IRQHandler + .word SPI3_IRQHandler + .word 0 + .word 0 + .word TIM6_DAC1_IRQHandler + .word TIM7_IRQHandler + .word DMA2_Channel1_IRQHandler + .word DMA2_Channel2_IRQHandler + .word DMA2_Channel3_IRQHandler + .word DMA2_Channel4_IRQHandler + .word DMA2_Channel5_IRQHandler + .word SDADC1_IRQHandler + .word SDADC2_IRQHandler + .word SDADC3_IRQHandler + .word COMP_IRQHandler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word USB_HP_IRQHandler + .word USB_LP_IRQHandler + .word USBWakeUp_IRQHandler + .word 0 + .word TIM19_IRQHandler + .word 0 + .word 0 + .word FPU_IRQHandler + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak TAMPER_STAMP_IRQHandler + .thumb_set TAMPER_STAMP_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_TS_IRQHandler + .thumb_set EXTI2_TS_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_IRQHandler + .thumb_set DMA1_Channel2_IRQHandler,Default_Handler + + .weak DMA1_Channel3_IRQHandler + .thumb_set DMA1_Channel3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_IRQHandler + .thumb_set DMA1_Channel4_IRQHandler,Default_Handler + + .weak DMA1_Channel5_IRQHandler + .thumb_set DMA1_Channel5_IRQHandler,Default_Handler + + .weak DMA1_Channel6_IRQHandler + .thumb_set DMA1_Channel6_IRQHandler,Default_Handler + + .weak DMA1_Channel7_IRQHandler + .thumb_set DMA1_Channel7_IRQHandler,Default_Handler + + .weak ADC1_IRQHandler + .thumb_set ADC1_IRQHandler,Default_Handler + + .weak CAN1_TX_IRQHandler + .thumb_set CAN1_TX_IRQHandler,Default_Handler + + .weak CAN1_RX0_IRQHandler + .thumb_set CAN1_RX0_IRQHandler,Default_Handler + + .weak CAN1_RX1_IRQHandler + .thumb_set CAN1_RX1_IRQHandler,Default_Handler + + .weak CAN1_SCE_IRQHandler + .thumb_set CAN1_SCE_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM15_IRQHandler + .thumb_set TIM15_IRQHandler,Default_Handler + + .weak TIM16_IRQHandler + .thumb_set TIM16_IRQHandler,Default_Handler + + .weak TIM17_IRQHandler + .thumb_set TIM17_IRQHandler,Default_Handler + + .weak TIM18_DAC2_IRQHandler + .thumb_set TIM18_DAC2_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM4_IRQHandler + .thumb_set TIM4_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_IRQHandler + .thumb_set USART3_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak CEC_IRQHandler + .thumb_set CEC_IRQHandler,Default_Handler + + .weak TIM12_IRQHandler + .thumb_set TIM12_IRQHandler,Default_Handler + + .weak TIM13_IRQHandler + .thumb_set TIM13_IRQHandler,Default_Handler + + .weak TIM14_IRQHandler + .thumb_set TIM14_IRQHandler,Default_Handler + + .weak TIM5_IRQHandler + .thumb_set TIM5_IRQHandler,Default_Handler + + .weak SPI3_IRQHandler + .thumb_set SPI3_IRQHandler,Default_Handler + + .weak TIM6_DAC1_IRQHandler + .thumb_set TIM6_DAC1_IRQHandler,Default_Handler + + .weak TIM7_IRQHandler + .thumb_set TIM7_IRQHandler,Default_Handler + + .weak DMA2_Channel1_IRQHandler + .thumb_set DMA2_Channel1_IRQHandler,Default_Handler + + .weak DMA2_Channel2_IRQHandler + .thumb_set DMA2_Channel2_IRQHandler,Default_Handler + + .weak DMA2_Channel3_IRQHandler + .thumb_set DMA2_Channel3_IRQHandler,Default_Handler + + .weak DMA2_Channel4_IRQHandler + .thumb_set DMA2_Channel4_IRQHandler,Default_Handler + + .weak DMA2_Channel5_IRQHandler + .thumb_set DMA2_Channel5_IRQHandler,Default_Handler + + .weak SDADC1_IRQHandler + .thumb_set SDADC1_IRQHandler,Default_Handler + + .weak SDADC2_IRQHandler + .thumb_set SDADC2_IRQHandler,Default_Handler + + .weak SDADC3_IRQHandler + .thumb_set SDADC3_IRQHandler,Default_Handler + + .weak COMP_IRQHandler + .thumb_set COMP_IRQHandler,Default_Handler + + .weak USB_HP_IRQHandler + .thumb_set USB_HP_IRQHandler,Default_Handler + + .weak USB_LP_IRQHandler + .thumb_set USB_LP_IRQHandler,Default_Handler + + .weak USBWakeUp_IRQHandler + .thumb_set USBWakeUp_IRQHandler,Default_Handler + + .weak TIM19_IRQHandler + .thumb_set TIM19_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/CMSIS/Device/ST/STM32F37x/Source/Templates/arm/startup_stm32f37x.s b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/CMSIS/Device/ST/STM32F37x/Source/Templates/arm/startup_stm32f37x.s new file mode 100644 index 0000000..6ca14f8 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/CMSIS/Device/ST/STM32F37x/Source/Templates/arm/startup_stm32f37x.s @@ -0,0 +1,396 @@ +;******************** (C) COPYRIGHT 2012 STMicroelectronics ******************** +;* File Name : startup_stm32f37x.s +;* Author : MCD Application Team +;* Version : V1.0.0 +;* Date : 20-September-2012 +;* Description : STM32F37x devices vector table for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; @attention +; +; Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); +; You may not use this file except in compliance with the License. +; You may obtain a copy of the License at: +; +; http://www.st.com/software_license_agreement_liberty_v2 +; +; Unless required by applicable law or agreed to in writing, software +; distributed under the License is distributed on an "AS IS" BASIS, +; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; See the License for the specific language governing permissions and +; limitations under the License. +; +;******************************************************************************* +; +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; <h> Stack Configuration +; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; <h> Heap Configuration +; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_IRQHandler ; PVD through EXTI Line detection + DCD TAMPER_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line + DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line0 + DCD EXTI1_IRQHandler ; EXTI Line1 + DCD EXTI2_TS_IRQHandler ; EXTI Line2 and Touch Sense + DCD EXTI3_IRQHandler ; EXTI Line3 + DCD EXTI4_IRQHandler ; EXTI Line4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_IRQHandler ; ADC1 + DCD CAN1_TX_IRQHandler ; CAN1 TX + DCD CAN1_RX0_IRQHandler ; CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + DCD CAN1_SCE_IRQHandler ; CAN1 SCE + DCD EXTI9_5_IRQHandler ; External Line[9:5]s + DCD TIM15_IRQHandler ; TIM15 + DCD TIM16_IRQHandler ; TIM16 + DCD TIM17_IRQHandler ; TIM17 + DCD TIM18_DAC2_IRQHandler ; TIM18 and DAC2 + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; External Line[15:10]s + DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line + DCD CEC_IRQHandler ; CEC + DCD TIM12_IRQHandler ; TIM12 + DCD TIM13_IRQHandler ; TIM13 + DCD TIM14_IRQHandler ; TIM14 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM6_DAC1_IRQHandler ; TIM6 and DAC1 Channel1 & channel2 + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1 + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2 + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3 + DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4 + DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5 + DCD SDADC1_IRQHandler ; SDADC1 + DCD SDADC2_IRQHandler ; SDADC2 + DCD SDADC3_IRQHandler ; SDADC3 + DCD COMP_IRQHandler ; COMP + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD USB_HP_IRQHandler ; USB High Priority + DCD USB_LP_IRQHandler ; USB Low Priority + DCD USBWakeUp_IRQHandler ; USB Wakeup + DCD 0 ; Reserved + DCD TIM19_IRQHandler ; TIM19 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD FPU_IRQHandler ; FPU +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMPER_STAMP_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_TS_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_IRQHandler [WEAK] + EXPORT CAN1_TX_IRQHandler [WEAK] + EXPORT CAN1_RX0_IRQHandler [WEAK] + EXPORT CAN1_RX1_IRQHandler [WEAK] + EXPORT CAN1_SCE_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM15_IRQHandler [WEAK] + EXPORT TIM16_IRQHandler [WEAK] + EXPORT TIM17_IRQHandler [WEAK] + EXPORT TIM18_DAC2_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT CEC_IRQHandler [WEAK] + EXPORT TIM12_IRQHandler [WEAK] + EXPORT TIM13_IRQHandler [WEAK] + EXPORT TIM14_IRQHandler [WEAK] + EXPORT TIM5_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT TIM6_DAC1_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT DMA2_Channel1_IRQHandler [WEAK] + EXPORT DMA2_Channel2_IRQHandler [WEAK] + EXPORT DMA2_Channel3_IRQHandler [WEAK] + EXPORT DMA2_Channel4_IRQHandler [WEAK] + EXPORT DMA2_Channel5_IRQHandler [WEAK] + EXPORT SDADC1_IRQHandler [WEAK] + EXPORT SDADC2_IRQHandler [WEAK] + EXPORT SDADC3_IRQHandler [WEAK] + EXPORT COMP_IRQHandler [WEAK] + EXPORT USB_HP_IRQHandler [WEAK] + EXPORT USB_LP_IRQHandler [WEAK] + EXPORT USBWakeUp_IRQHandler [WEAK] + EXPORT TIM19_IRQHandler [WEAK] + EXPORT FPU_IRQHandler [WEAK] + + +WWDG_IRQHandler +PVD_IRQHandler +TAMPER_STAMP_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_TS_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_IRQHandler +CAN1_TX_IRQHandler +CAN1_RX0_IRQHandler +CAN1_RX1_IRQHandler +CAN1_SCE_IRQHandler +EXTI9_5_IRQHandler +TIM15_IRQHandler +TIM16_IRQHandler +TIM17_IRQHandler +TIM18_DAC2_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +CEC_IRQHandler +TIM12_IRQHandler +TIM13_IRQHandler +TIM14_IRQHandler +TIM5_IRQHandler +SPI3_IRQHandler +TIM6_DAC1_IRQHandler +TIM7_IRQHandler +DMA2_Channel1_IRQHandler +DMA2_Channel2_IRQHandler +DMA2_Channel3_IRQHandler +DMA2_Channel4_IRQHandler +DMA2_Channel5_IRQHandler +SDADC1_IRQHandler +SDADC2_IRQHandler +SDADC3_IRQHandler +COMP_IRQHandler +USB_HP_IRQHandler +USB_LP_IRQHandler +USBWakeUp_IRQHandler +TIM19_IRQHandler +FPU_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/CMSIS/Device/ST/STM32F37x/Source/Templates/iar/startup_stm32f37x.s b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/CMSIS/Device/ST/STM32F37x/Source/Templates/iar/startup_stm32f37x.s new file mode 100644 index 0000000..211862e --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/CMSIS/Device/ST/STM32F37x/Source/Templates/iar/startup_stm32f37x.s @@ -0,0 +1,542 @@ +;/******************** (C) COPYRIGHT 2012 STMicroelectronics ******************** +;* File Name : startup_stm32f37x.s +;* Author : MCD Application Team +;* Version : V1.0.0 +;* Date : 20-September-2012 +;* Description : STM32F37x Devices vector table for EWARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == iar_program_start, +;* - Set the vector table entries with the exceptions ISR +;* address. +;* After Reset the Cortex-M4 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;******************************************************************************* +; @attention +; +; Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); +; You may not use this file except in compliance with the License. +; You may obtain a copy of the License at: +; +; http://www.st.com/software_license_agreement_liberty_v2 +; +; Unless required by applicable law or agreed to in writing, software +; distributed under the License is distributed on an "AS IS" BASIS, +; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +; See the License for the specific language governing permissions and +; limitations under the License. +; +;******************************************************************************* +; +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler ; Reset Handler + + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_IRQHandler ; PVD through EXTI Line detection + DCD TAMPER_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line + DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line0 + DCD EXTI1_IRQHandler ; EXTI Line1 + DCD EXTI2_TS_IRQHandler ; EXTI Line2 and Touch Sense controller + DCD EXTI3_IRQHandler ; EXTI Line3 + DCD EXTI4_IRQHandler ; EXTI Line4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_IRQHandler ; ADC1 + DCD CAN1_TX_IRQHandler ; CAN1 TX + DCD CAN1_RX0_IRQHandler ; CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + DCD CAN1_SCE_IRQHandler ; CAN1 SCE + DCD EXTI9_5_IRQHandler ; External Line[9:5]s + DCD TIM15_IRQHandler ; TIM15 + DCD TIM16_IRQHandler ; TIM16 + DCD TIM17_IRQHandler ; TIM17 + DCD TIM18_DAC2_IRQHandler ; TIM18 and DAC2 + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; External Line[15:10]s + DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line + DCD CEC_IRQHandler ; CEC + DCD TIM12_IRQHandler ; TIM12 + DCD TIM13_IRQHandler ; TIM13 + DCD TIM14_IRQHandler ; TIM14 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD TIM6_DAC1_IRQHandler ; TIM6 and DAC1 Channel1 & channel2 + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel 1 + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel 2 + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel 3 + DCD DMA2_Channel4_IRQHandler ; DMA2 Channel 4 + DCD DMA2_Channel5_IRQHandler ; DMA2 Channel 5 + DCD SDADC1_IRQHandler ; SDADC1 + DCD SDADC2_IRQHandler ; SDADC2 + DCD SDADC3_IRQHandler ; SDADC3 + DCD COMP_IRQHandler ; COMP + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD USB_HP_IRQHandler ; USB High Priority + DCD USB_LP_IRQHandler ; USB Low Priority + DCD USBWakeUp_IRQHandler ; USB Wakeup + DCD 0 ; Reserved + DCD TIM19_IRQHandler ; TIM19 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD FPU_IRQHandler ; FPU + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + PUBWEAK Reset_Handler + SECTION .text:CODE:REORDER(2) +Reset_Handler + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:REORDER(1) +NMI_Handler + B NMI_Handler + + PUBWEAK HardFault_Handler + SECTION .text:CODE:REORDER(1) +HardFault_Handler + B HardFault_Handler + + PUBWEAK MemManage_Handler + SECTION .text:CODE:REORDER(1) +MemManage_Handler + B MemManage_Handler + + PUBWEAK BusFault_Handler + SECTION .text:CODE:REORDER(1) +BusFault_Handler + B BusFault_Handler + + PUBWEAK UsageFault_Handler + SECTION .text:CODE:REORDER(1) +UsageFault_Handler + B UsageFault_Handler + + PUBWEAK SVC_Handler + SECTION .text:CODE:REORDER(1) +SVC_Handler + B SVC_Handler + + PUBWEAK DebugMon_Handler + SECTION .text:CODE:REORDER(1) +DebugMon_Handler + B DebugMon_Handler + + PUBWEAK PendSV_Handler + SECTION .text:CODE:REORDER(1) +PendSV_Handler + B PendSV_Handler + + PUBWEAK SysTick_Handler + SECTION .text:CODE:REORDER(1) +SysTick_Handler + B SysTick_Handler + + PUBWEAK WWDG_IRQHandler + SECTION .text:CODE:REORDER(1) +WWDG_IRQHandler + B WWDG_IRQHandler + + PUBWEAK PVD_IRQHandler + SECTION .text:CODE:REORDER(1) +PVD_IRQHandler + B PVD_IRQHandler + + PUBWEAK TAMPER_STAMP_IRQHandler + SECTION .text:CODE:REORDER(1) +TAMPER_STAMP_IRQHandler + B TAMPER_STAMP_IRQHandler + + PUBWEAK RTC_WKUP_IRQHandler + SECTION .text:CODE:REORDER(1) +RTC_WKUP_IRQHandler + B RTC_WKUP_IRQHandler + + PUBWEAK FLASH_IRQHandler + SECTION .text:CODE:REORDER(1) +FLASH_IRQHandler + B FLASH_IRQHandler + + PUBWEAK RCC_IRQHandler + SECTION .text:CODE:REORDER(1) +RCC_IRQHandler + B RCC_IRQHandler + + PUBWEAK EXTI0_IRQHandler + SECTION .text:CODE:REORDER(1) +EXTI0_IRQHandler + B EXTI0_IRQHandler + + PUBWEAK EXTI1_IRQHandler + SECTION .text:CODE:REORDER(1) +EXTI1_IRQHandler + B EXTI1_IRQHandler + + PUBWEAK EXTI2_TS_IRQHandler + SECTION .text:CODE:REORDER(1) +EXTI2_TS_IRQHandler + B EXTI2_TS_IRQHandler + + PUBWEAK EXTI3_IRQHandler + SECTION .text:CODE:REORDER(1) +EXTI3_IRQHandler + B EXTI3_IRQHandler + + PUBWEAK EXTI4_IRQHandler + SECTION .text:CODE:REORDER(1) +EXTI4_IRQHandler + B EXTI4_IRQHandler + + PUBWEAK DMA1_Channel1_IRQHandler + SECTION .text:CODE:REORDER(1) +DMA1_Channel1_IRQHandler + B DMA1_Channel1_IRQHandler + + PUBWEAK DMA1_Channel2_IRQHandler + SECTION .text:CODE:REORDER(1) +DMA1_Channel2_IRQHandler + B DMA1_Channel2_IRQHandler + + PUBWEAK DMA1_Channel3_IRQHandler + SECTION .text:CODE:REORDER(1) +DMA1_Channel3_IRQHandler + B DMA1_Channel3_IRQHandler + + PUBWEAK DMA1_Channel4_IRQHandler + SECTION .text:CODE:REORDER(1) +DMA1_Channel4_IRQHandler + B DMA1_Channel4_IRQHandler + + PUBWEAK DMA1_Channel5_IRQHandler + SECTION .text:CODE:REORDER(1) +DMA1_Channel5_IRQHandler + B DMA1_Channel5_IRQHandler + + PUBWEAK DMA1_Channel6_IRQHandler + SECTION .text:CODE:REORDER(1) +DMA1_Channel6_IRQHandler + B DMA1_Channel6_IRQHandler + + PUBWEAK DMA1_Channel7_IRQHandler + SECTION .text:CODE:REORDER(1) +DMA1_Channel7_IRQHandler + B DMA1_Channel7_IRQHandler + + PUBWEAK ADC1_IRQHandler + SECTION .text:CODE:REORDER(1) +ADC1_IRQHandler + B ADC1_IRQHandler + + PUBWEAK CAN1_TX_IRQHandler + SECTION .text:CODE:REORDER(1) +CAN1_TX_IRQHandler + B CAN1_TX_IRQHandler + + PUBWEAK CAN1_RX0_IRQHandler + SECTION .text:CODE:REORDER(1) +CAN1_RX0_IRQHandler + B CAN1_RX0_IRQHandler + + PUBWEAK CAN1_RX1_IRQHandler + SECTION .text:CODE:REORDER(1) +CAN1_RX1_IRQHandler + B CAN1_RX1_IRQHandler + + PUBWEAK CAN1_SCE_IRQHandler + SECTION .text:CODE:REORDER(1) +CAN1_SCE_IRQHandler + B CAN1_SCE_IRQHandler + + PUBWEAK EXTI9_5_IRQHandler + SECTION .text:CODE:REORDER(1) +EXTI9_5_IRQHandler + B EXTI9_5_IRQHandler + + PUBWEAK TIM15_IRQHandler + SECTION .text:CODE:REORDER(1) +TIM15_IRQHandler + B TIM15_IRQHandler + + PUBWEAK TIM16_IRQHandler + SECTION .text:CODE:REORDER(1) +TIM16_IRQHandler + B TIM16_IRQHandler + + PUBWEAK TIM17_IRQHandler + SECTION .text:CODE:REORDER(1) +TIM17_IRQHandler + B TIM17_IRQHandler + + PUBWEAK TIM18_DAC2_IRQHandler + SECTION .text:CODE:REORDER(1) +TIM18_DAC2_IRQHandler + B TIM18_DAC2_IRQHandler + + PUBWEAK TIM2_IRQHandler + SECTION .text:CODE:REORDER(1) +TIM2_IRQHandler + B TIM2_IRQHandler + + PUBWEAK TIM3_IRQHandler + SECTION .text:CODE:REORDER(1) +TIM3_IRQHandler + B TIM3_IRQHandler + + PUBWEAK TIM4_IRQHandler + SECTION .text:CODE:REORDER(1) +TIM4_IRQHandler + B TIM4_IRQHandler + + PUBWEAK I2C1_EV_IRQHandler + SECTION .text:CODE:REORDER(1) +I2C1_EV_IRQHandler + B I2C1_EV_IRQHandler + + PUBWEAK I2C1_ER_IRQHandler + SECTION .text:CODE:REORDER(1) +I2C1_ER_IRQHandler + B I2C1_ER_IRQHandler + + PUBWEAK I2C2_EV_IRQHandler + SECTION .text:CODE:REORDER(1) +I2C2_EV_IRQHandler + B I2C2_EV_IRQHandler + + PUBWEAK I2C2_ER_IRQHandler + SECTION .text:CODE:REORDER(1) +I2C2_ER_IRQHandler + B I2C2_ER_IRQHandler + + PUBWEAK SPI1_IRQHandler + SECTION .text:CODE:REORDER(1) +SPI1_IRQHandler + B SPI1_IRQHandler + + PUBWEAK SPI2_IRQHandler + SECTION .text:CODE:REORDER(1) +SPI2_IRQHandler + B SPI2_IRQHandler + + PUBWEAK USART1_IRQHandler + SECTION .text:CODE:REORDER(1) +USART1_IRQHandler + B USART1_IRQHandler + + PUBWEAK USART2_IRQHandler + SECTION .text:CODE:REORDER(1) +USART2_IRQHandler + B USART2_IRQHandler + + PUBWEAK USART3_IRQHandler + SECTION .text:CODE:REORDER(1) +USART3_IRQHandler + B USART3_IRQHandler + + PUBWEAK EXTI15_10_IRQHandler + SECTION .text:CODE:REORDER(1) +EXTI15_10_IRQHandler + B EXTI15_10_IRQHandler + + PUBWEAK RTC_Alarm_IRQHandler + SECTION .text:CODE:REORDER(1) +RTC_Alarm_IRQHandler + B RTC_Alarm_IRQHandler + + PUBWEAK CEC_IRQHandler + SECTION .text:CODE:REORDER(1) +CEC_IRQHandler + B CEC_IRQHandler + + PUBWEAK TIM12_IRQHandler + SECTION .text:CODE:REORDER(1) +TIM12_IRQHandler + B TIM12_IRQHandler + + PUBWEAK TIM13_IRQHandler + SECTION .text:CODE:REORDER(1) +TIM13_IRQHandler + B TIM13_IRQHandler + + PUBWEAK TIM14_IRQHandler + SECTION .text:CODE:REORDER(1) +TIM14_IRQHandler + B TIM14_IRQHandler + + PUBWEAK TIM5_IRQHandler + SECTION .text:CODE:REORDER(1) +TIM5_IRQHandler + B TIM5_IRQHandler + + PUBWEAK SPI3_IRQHandler + SECTION .text:CODE:REORDER(1) +SPI3_IRQHandler + B SPI3_IRQHandler + + PUBWEAK TIM6_DAC1_IRQHandler + SECTION .text:CODE:REORDER(1) +TIM6_DAC1_IRQHandler + B TIM6_DAC1_IRQHandler + + PUBWEAK TIM7_IRQHandler + SECTION .text:CODE:REORDER(1) +TIM7_IRQHandler + B TIM7_IRQHandler + + PUBWEAK DMA2_Channel1_IRQHandler + SECTION .text:CODE:REORDER(1) +DMA2_Channel1_IRQHandler + B DMA2_Channel1_IRQHandler + + PUBWEAK DMA2_Channel2_IRQHandler + SECTION .text:CODE:REORDER(1) +DMA2_Channel2_IRQHandler + B DMA2_Channel2_IRQHandler + + PUBWEAK DMA2_Channel3_IRQHandler + SECTION .text:CODE:REORDER(1) +DMA2_Channel3_IRQHandler + B DMA2_Channel3_IRQHandler + + PUBWEAK DMA2_Channel4_IRQHandler + SECTION .text:CODE:REORDER(1) +DMA2_Channel4_IRQHandler + B DMA2_Channel4_IRQHandler + + PUBWEAK DMA2_Channel5_IRQHandler + SECTION .text:CODE:REORDER(1) +DMA2_Channel5_IRQHandler + B DMA2_Channel5_IRQHandler + + PUBWEAK SDADC1_IRQHandler + SECTION .text:CODE:REORDER(1) +SDADC1_IRQHandler + B SDADC1_IRQHandler + + PUBWEAK SDADC2_IRQHandler + SECTION .text:CODE:REORDER(1) +SDADC2_IRQHandler + B SDADC2_IRQHandler + + PUBWEAK SDADC3_IRQHandler + SECTION .text:CODE:REORDER(1) +SDADC3_IRQHandler + B SDADC3_IRQHandler + + PUBWEAK COMP_IRQHandler + SECTION .text:CODE:REORDER(1) +COMP_IRQHandler + B COMP_IRQHandler + + PUBWEAK USB_HP_IRQHandler + SECTION .text:CODE:REORDER(1) +USB_HP_IRQHandler + B USB_HP_IRQHandler + + PUBWEAK USB_LP_IRQHandler + SECTION .text:CODE:REORDER(1) +USB_LP_IRQHandler + B USB_LP_IRQHandler + + PUBWEAK USBWakeUp_IRQHandler + SECTION .text:CODE:REORDER(1) +USBWakeUp_IRQHandler + B USBWakeUp_IRQHandler + + PUBWEAK TIM19_IRQHandler + SECTION .text:CODE:REORDER(1) +TIM19_IRQHandler + B TIM19_IRQHandler + + PUBWEAK FPU_IRQHandler + SECTION .text:CODE:REORDER(1) +FPU_IRQHandler + B FPU_IRQHandler + + END +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/CMSIS/Device/ST/STM32F37x/Source/Templates/system_stm32f37x.c b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/CMSIS/Device/ST/STM32F37x/Source/Templates/system_stm32f37x.c new file mode 100644 index 0000000..f7add14 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/CMSIS/Device/ST/STM32F37x/Source/Templates/system_stm32f37x.c @@ -0,0 +1,380 @@ +/** + ****************************************************************************** + * @file system_stm32f37x.c + * @author MCD Application Team + * @version V1.0.0 + * @date 20-September-2012 + * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File. + * This file contains the system clock configuration for STM32F37x devices, + * and is generated by the clock configuration tool + * STM32f37x_Clock_Configuration_V1.0.0.xls + * + * 1. This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier + * and Divider factors, AHB/APBx prescalers and Flash settings), + * depending on the configuration made in the clock xls tool. + * This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32f37x.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * 2. After each device reset the HSI (8 MHz Range) is used as system clock source. + * Then SystemInit() function is called, in "startup_stm32f37x.s" file, to + * configure the system clock before to branch to main program. + * + * 3. If the system clock source selected by user fails to startup, the SystemInit() + * function will do nothing and HSI still used as system clock source. User can + * add some code to deal with this issue inside the SetSysClock() function. + * + * 4. The default value of HSE crystal is set to 8MHz, refer to "HSE_VALUE" defined + * in "stm32f37x.h" file. When HSE is used as system clock source, directly or + * through PLL, and you are using different crystal you have to adapt the HSE + * value to your own configuration. + * + * 5. This file configures the system clock as follows: + *============================================================================= + * Supported STM32F37x device + *============================================================================= + * System Clock source | PLL (HSE) + *----------------------------------------------------------------------------- + * SYSCLK(Hz) | 72000000 + *----------------------------------------------------------------------------- + * HCLK(Hz) | 72000000 + *----------------------------------------------------------------------------- + * AHB Prescaler | 1 + *----------------------------------------------------------------------------- + * APB2 Prescaler | 1 + *----------------------------------------------------------------------------- + * APB1 Prescaler | 2 + *----------------------------------------------------------------------------- + * HSE Frequency(Hz) | 8000000 + *---------------------------------------------------------------------------- + * PLLMUL | 9 + *----------------------------------------------------------------------------- + * PREDIV | 1 + *----------------------------------------------------------------------------- + * USB Clock | DISABLE + *----------------------------------------------------------------------------- + * Flash Latency(WS) | 2 + *----------------------------------------------------------------------------- + * Prefetch Buffer | ON + *----------------------------------------------------------------------------- + *============================================================================= + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup STM32F37x_System + * @{ + */ + +/** @addtogroup STM32F37x_System_Private_Includes + * @{ + */ + +#include "stm32f37x.h" + +/** + * @} + */ + +/** @addtogroup STM32F37x_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F37x_System_Private_Defines + * @{ + */ + +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +/** + * @} + */ + +/** @addtogroup STM32F37x_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F37x_System_Private_Variables + * @{ + */ +uint32_t SystemCoreClock = 72000000; +__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; + +/** + * @} + */ + +/** @addtogroup STM32F37x_System_Private_FunctionPrototypes + * @{ + */ + +static void SetSysClock(void); + +/** + * @} + */ + +/** @addtogroup STM32F37x_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontrollers system. + * Initialize the Embedded Flash Interface, the PLL and update the + * SystemCoreClock variable. + * @param None + * @retval None + */ +void SystemInit (void) +{ + /* FPU settings ------------------------------------------------------------*/ + #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */ + #endif + + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + + /* Reset SW[1:0], HPRE[3:0], PPRE[2:0], ADCPRE, SDADCPRE and MCOSEL[2:0] bits */ + RCC->CFGR &= (uint32_t)0x00FF0000; + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE bits */ + RCC->CFGR &= (uint32_t)0xFF80FFFF; + + /* Reset PREDIV1[3:0] bits */ + RCC->CFGR2 &= (uint32_t)0xFFFFFFF0; + + /* Reset USARTSW[1:0], I2CSW and CECSW bits */ + RCC->CFGR3 &= (uint32_t)0xFFF0F8C; + + /* Disable all interrupts */ + RCC->CIR = 0x00000000; + +/* Configure the System clock frequency, AHB/APBx prescalers and Flash settings */ + SetSysClock(); + + +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */ +#endif +} + +/** + * @brief Update SystemCoreClock according to Clock Register Values + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32f37x.h file (default value + * 8 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32f37x.h file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * @param None + * @retval None + */ +void SystemCoreClockUpdate (void) +{ + uint32_t tmp = 0, pllmull = 0, pllsource = 0, prediv1factor = 0; + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00: /* HSI used as system clock */ + SystemCoreClock = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock */ + SystemCoreClock = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock */ + /* Get PLL clock source and multiplication factor ----------------------*/ + pllmull = RCC->CFGR & RCC_CFGR_PLLMULL; + pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; + pllmull = ( pllmull >> 18) + 2; + + if (pllsource == 0x00) + { + /* HSI oscillator clock divided by 2 selected as PLL clock entry */ + SystemCoreClock = (HSI_VALUE >> 1) * pllmull; + } + else + { + prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; + /* HSE oscillator clock selected as PREDIV1 clock entry */ + SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; + } + break; + default: /* HSI used as system clock */ + SystemCoreClock = HSI_VALUE; + break; + } + /* Compute HCLK clock frequency ----------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK clock frequency */ + SystemCoreClock >>= tmp; +} + +/** + * @brief Configures the System clock frequency, AHB/APBx prescalers and Flash + * settings. + * @note This function should be called only once the RCC clock configuration + * is reset to the default reset state (done in SystemInit() function). + * @param None + * @retval None + */ +static void SetSysClock(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + +/******************************************************************************/ +/* PLL (clocked by HSE) used as System clock source */ +/******************************************************************************/ + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration -----------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer and set Flash Latency */ + FLASH->ACR = FLASH_ACR_PRFTBE | (uint32_t)FLASH_ACR_LATENCY_1; + + /* HCLK = SYSCLK / 1 */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK / 1 */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK / 2 */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; + + /* PLL configuration */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLMULL9); + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)RCC_CFGR_SWS_PLL) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + |