diff options
Diffstat (limited to 'thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32F10x_StdPeriph_Driver/src/misc.c')
-rw-r--r-- | thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32F10x_StdPeriph_Driver/src/misc.c | 231 |
1 files changed, 231 insertions, 0 deletions
diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32F10x_StdPeriph_Driver/src/misc.c b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32F10x_StdPeriph_Driver/src/misc.c new file mode 100644 index 0000000..b252f35 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32F10x_StdPeriph_Driver/src/misc.c @@ -0,0 +1,231 @@ +/** + ****************************************************************************** + * @file misc.c + * @author MCD Application Team + * @version V3.6.1 + * @date 05-March-2012 + * @brief This file provides all the miscellaneous firmware functions (add-on + * to CMSIS functions). + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "misc.h" + +/** @addtogroup STM32F10x_StdPeriph_Driver + * @{ + */ + +/** @defgroup MISC + * @brief MISC driver modules + * @{ + */ + +/** @defgroup MISC_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @defgroup MISC_Private_Defines + * @{ + */ + +#define AIRCR_VECTKEY_MASK ((uint32_t)0x05FA0000) +/** + * @} + */ + +/** @defgroup MISC_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup MISC_Private_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup MISC_Private_FunctionPrototypes + * @{ + */ + +/** + * @} + */ + +/** @defgroup MISC_Private_Functions + * @{ + */ + +/** + * @brief Configures the priority grouping: pre-emption priority and subpriority. + * @param NVIC_PriorityGroup: specifies the priority grouping bits length. + * This parameter can be one of the following values: + * @arg NVIC_PriorityGroup_0: 0 bits for pre-emption priority + * 4 bits for subpriority + * @arg NVIC_PriorityGroup_1: 1 bits for pre-emption priority + * 3 bits for subpriority + * @arg NVIC_PriorityGroup_2: 2 bits for pre-emption priority + * 2 bits for subpriority + * @arg NVIC_PriorityGroup_3: 3 bits for pre-emption priority + * 1 bits for subpriority + * @arg NVIC_PriorityGroup_4: 4 bits for pre-emption priority + * 0 bits for subpriority + * @retval None + */ +void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup) +{ + /* Check the parameters */ + assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup)); + + /* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */ + SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup; +} + +/** + * @brief Initializes the NVIC peripheral according to the specified + * parameters in the NVIC_InitStruct. + * @param NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains + * the configuration information for the specified NVIC peripheral. + * @retval None + */ +void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct) +{ + uint32_t tmppriority = 0x00, tmppre = 0x00, tmpsub = 0x0F; + + /* Check the parameters */ + assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd)); + assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority)); + assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority)); + + if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE) + { + /* Compute the Corresponding IRQ Priority --------------------------------*/ + tmppriority = (0x700 - ((SCB->AIRCR) & (uint32_t)0x700))>> 0x08; + tmppre = (0x4 - tmppriority); + tmpsub = tmpsub >> tmppriority; + + tmppriority = (uint32_t)NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre; + tmppriority |= NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub; + tmppriority = tmppriority << 0x04; + + NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel] = tmppriority; + + /* Enable the Selected IRQ Channels --------------------------------------*/ + NVIC->ISER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] = + (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F); + } + else + { + /* Disable the Selected IRQ Channels -------------------------------------*/ + NVIC->ICER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] = + (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F); + } +} + +/** + * @brief Sets the vector table location and Offset. + * @param NVIC_VectTab: specifies if the vector table is in RAM or FLASH memory. + * This parameter can be one of the following values: + * @arg NVIC_VectTab_RAM + * @arg NVIC_VectTab_FLASH + * @param Offset: Vector Table base offset field. This value must be a multiple + * of 0x200. + * @retval None + */ +void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset) +{ + /* Check the parameters */ + assert_param(IS_NVIC_VECTTAB(NVIC_VectTab)); + assert_param(IS_NVIC_OFFSET(Offset)); + + SCB->VTOR = NVIC_VectTab | (Offset & (uint32_t)0x1FFFFF80); +} + +/** + * @brief Selects the condition for the system to enter low power mode. + * @param LowPowerMode: Specifies the new mode for the system to enter low power mode. + * This parameter can be one of the following values: + * @arg NVIC_LP_SEVONPEND + * @arg NVIC_LP_SLEEPDEEP + * @arg NVIC_LP_SLEEPONEXIT + * @param NewState: new state of LP condition. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState) +{ + /* Check the parameters */ + assert_param(IS_NVIC_LP(LowPowerMode)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + SCB->SCR |= LowPowerMode; + } + else + { + SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode); + } +} + +/** + * @brief Configures the SysTick clock source. + * @param SysTick_CLKSource: specifies the SysTick clock source. + * This parameter can be one of the following values: + * @arg SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 selected as SysTick clock source. + * @arg SysTick_CLKSource_HCLK: AHB clock selected as SysTick clock source. + * @retval None + */ +void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource) +{ + /* Check the parameters */ + assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource)); + if (SysTick_CLKSource == SysTick_CLKSource_HCLK) + { + SysTick->CTRL |= SysTick_CLKSource_HCLK; + } + else + { + SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8; + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |