aboutsummaryrefslogtreecommitdiff
path: root/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32F30x_StdPeriph_Driver/inc/stm32f30x_usart.h
diff options
context:
space:
mode:
Diffstat (limited to 'thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32F30x_StdPeriph_Driver/inc/stm32f30x_usart.h')
-rw-r--r--thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32F30x_StdPeriph_Driver/inc/stm32f30x_usart.h607
1 files changed, 607 insertions, 0 deletions
diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32F30x_StdPeriph_Driver/inc/stm32f30x_usart.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32F30x_StdPeriph_Driver/inc/stm32f30x_usart.h
new file mode 100644
index 0000000..3a9ad2c
--- /dev/null
+++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32F30x_StdPeriph_Driver/inc/stm32f30x_usart.h
@@ -0,0 +1,607 @@
+/**
+ ******************************************************************************
+ * @file stm32f30x_usart.h
+ * @author MCD Application Team
+ * @version V1.0.1
+ * @date 23-October-2012
+ * @brief This file contains all the functions prototypes for the USART
+ * firmware library.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F30x_USART_H
+#define __STM32F30x_USART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f30x.h"
+
+/** @addtogroup STM32F30x_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup USART
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+
+
+/**
+ * @brief USART Init Structure definition
+ */
+
+typedef struct
+{
+ uint32_t USART_BaudRate; /*!< This member configures the USART communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (16 * (USART_InitStruct->USART_BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 16) + 0.5 */
+
+ uint32_t USART_WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref USART_Word_Length */
+
+ uint32_t USART_StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref USART_Stop_Bits */
+
+ uint32_t USART_Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref USART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t USART_Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref USART_Mode */
+
+ uint32_t USART_HardwareFlowControl; /*!< Specifies wether the hardware flow control mode is enabled
+ or disabled.
+ This parameter can be a value of @ref USART_Hardware_Flow_Control*/
+} USART_InitTypeDef;
+
+/**
+ * @brief USART Clock Init Structure definition
+ */
+
+typedef struct
+{
+ uint32_t USART_Clock; /*!< Specifies whether the USART clock is enabled or disabled.
+ This parameter can be a value of @ref USART_Clock */
+
+ uint32_t USART_CPOL; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref USART_Clock_Polarity */
+
+ uint32_t USART_CPHA; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref USART_Clock_Phase */
+
+ uint32_t USART_LastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref USART_Last_Bit */
+} USART_ClockInitTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup USART_Exported_Constants
+ * @{
+ */
+
+#define IS_USART_ALL_PERIPH(PERIPH) (((PERIPH) == USART1) || \
+ ((PERIPH) == USART2) || \
+ ((PERIPH) == USART3) || \
+ ((PERIPH) == UART4) || \
+ ((PERIPH) == UART5))
+
+#define IS_USART_123_PERIPH(PERIPH) (((PERIPH) == USART1) || \
+ ((PERIPH) == USART2) || \
+ ((PERIPH) == USART3))
+
+#define IS_USART_1234_PERIPH(PERIPH) (((PERIPH) == USART1) || \
+ ((PERIPH) == USART2) || \
+ ((PERIPH) == USART3) || \
+ ((PERIPH) == UART4))
+
+
+/** @defgroup USART_Word_Length
+ * @{
+ */
+
+#define USART_WordLength_8b ((uint32_t)0x00000000)
+#define USART_WordLength_9b USART_CR1_M
+#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WordLength_8b) || \
+ ((LENGTH) == USART_WordLength_9b))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Stop_Bits
+ * @{
+ */
+
+#define USART_StopBits_1 ((uint32_t)0x00000000)
+#define USART_StopBits_2 USART_CR2_STOP_1
+#define USART_StopBits_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1)
+#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_StopBits_1) || \
+ ((STOPBITS) == USART_StopBits_2) || \
+ ((STOPBITS) == USART_StopBits_1_5))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Parity
+ * @{
+ */
+
+#define USART_Parity_No ((uint32_t)0x00000000)
+#define USART_Parity_Even USART_CR1_PCE
+#define USART_Parity_Odd (USART_CR1_PCE | USART_CR1_PS)
+#define IS_USART_PARITY(PARITY) (((PARITY) == USART_Parity_No) || \
+ ((PARITY) == USART_Parity_Even) || \
+ ((PARITY) == USART_Parity_Odd))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Mode
+ * @{
+ */
+
+#define USART_Mode_Rx USART_CR1_RE
+#define USART_Mode_Tx USART_CR1_TE
+#define IS_USART_MODE(MODE) ((((MODE) & (uint32_t)0xFFFFFFF3) == 0x00) && \
+ ((MODE) != (uint32_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Hardware_Flow_Control
+ * @{
+ */
+
+#define USART_HardwareFlowControl_None ((uint32_t)0x00000000)
+#define USART_HardwareFlowControl_RTS USART_CR3_RTSE
+#define USART_HardwareFlowControl_CTS USART_CR3_CTSE
+#define USART_HardwareFlowControl_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE)
+#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)\
+ (((CONTROL) == USART_HardwareFlowControl_None) || \
+ ((CONTROL) == USART_HardwareFlowControl_RTS) || \
+ ((CONTROL) == USART_HardwareFlowControl_CTS) || \
+ ((CONTROL) == USART_HardwareFlowControl_RTS_CTS))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock
+ * @{
+ */
+
+#define USART_Clock_Disable ((uint32_t)0x00000000)
+#define USART_Clock_Enable USART_CR2_CLKEN
+#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_Clock_Disable) || \
+ ((CLOCK) == USART_Clock_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Polarity
+ * @{
+ */
+
+#define USART_CPOL_Low ((uint32_t)0x00000000)
+#define USART_CPOL_High USART_CR2_CPOL
+#define IS_USART_CPOL(CPOL) (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High))
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Phase
+ * @{
+ */
+
+#define USART_CPHA_1Edge ((uint32_t)0x00000000)
+#define USART_CPHA_2Edge USART_CR2_CPHA
+#define IS_USART_CPHA(CPHA) (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge))
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Last_Bit
+ * @{
+ */
+
+#define USART_LastBit_Disable ((uint32_t)0x00000000)
+#define USART_LastBit_Enable USART_CR2_LBCL
+#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LastBit_Disable) || \
+ ((LASTBIT) == USART_LastBit_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup USART_DMA_Requests
+ * @{
+ */
+
+#define USART_DMAReq_Tx USART_CR3_DMAT
+#define USART_DMAReq_Rx USART_CR3_DMAR
+#define IS_USART_DMAREQ(DMAREQ) ((((DMAREQ) & (uint32_t)0xFFFFFF3F) == 0x00) && \
+ ((DMAREQ) != (uint32_t)0x00))
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_DMA_Recception_Error
+ * @{
+ */
+
+#define USART_DMAOnError_Enable ((uint32_t)0x00000000)
+#define USART_DMAOnError_Disable USART_CR3_DDRE
+#define IS_USART_DMAONERROR(DMAERROR) (((DMAERROR) == USART_DMAOnError_Disable)|| \
+ ((DMAERROR) == USART_DMAOnError_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup USART_MuteMode_WakeUp_methods
+ * @{
+ */
+
+#define USART_WakeUp_IdleLine ((uint32_t)0x00000000)
+#define USART_WakeUp_AddressMark USART_CR1_WAKE
+#define IS_USART_MUTEMODE_WAKEUP(WAKEUP) (((WAKEUP) == USART_WakeUp_IdleLine) || \
+ ((WAKEUP) == USART_WakeUp_AddressMark))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Address_Detection
+ * @{
+ */
+
+#define USART_AddressLength_4b ((uint32_t)0x00000000)
+#define USART_AddressLength_7b USART_CR2_ADDM7
+#define IS_USART_ADDRESS_DETECTION(ADDRESS) (((ADDRESS) == USART_AddressLength_4b) || \
+ ((ADDRESS) == USART_AddressLength_7b))
+/**
+ * @}
+ */
+
+/** @defgroup USART_StopMode_WakeUp_methods
+ * @{
+ */
+
+#define USART_WakeUpSource_AddressMatch ((uint32_t)0x00000000)
+#define USART_WakeUpSource_StartBit USART_CR3_WUS_1
+#define USART_WakeUpSource_RXNE (uint32_t)(USART_CR3_WUS_0 | USART_CR3_WUS_1)
+#define IS_USART_STOPMODE_WAKEUPSOURCE(SOURCE) (((SOURCE) == USART_WakeUpSource_AddressMatch) || \
+ ((SOURCE) == USART_WakeUpSource_StartBit) || \
+ ((SOURCE) == USART_WakeUpSource_RXNE))
+/**
+ * @}
+ */
+
+/** @defgroup USART_LIN_Break_Detection_Length
+ * @{
+ */
+
+#define USART_LINBreakDetectLength_10b ((uint32_t)0x00000000)
+#define USART_LINBreakDetectLength_11b USART_CR2_LBDL
+#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH) \
+ (((LENGTH) == USART_LINBreakDetectLength_10b) || \
+ ((LENGTH) == USART_LINBreakDetectLength_11b))
+/**
+ * @}
+ */
+
+/** @defgroup USART_IrDA_Low_Power
+ * @{
+ */
+
+#define USART_IrDAMode_LowPower USART_CR3_IRLP
+#define USART_IrDAMode_Normal ((uint32_t)0x00000000)
+#define IS_USART_IRDA_MODE(MODE) (((MODE) == USART_IrDAMode_LowPower) || \
+ ((MODE) == USART_IrDAMode_Normal))
+/**
+ * @}
+ */
+
+/** @defgroup USART_DE_Polarity
+ * @{
+ */
+
+#define USART_DEPolarity_High ((uint32_t)0x00000000)
+#define USART_DEPolarity_Low USART_CR3_DEP
+#define IS_USART_DE_POLARITY(POLARITY) (((POLARITY) == USART_DEPolarity_Low) || \
+ ((POLARITY) == USART_DEPolarity_High))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Inversion_Pins
+ * @{
+ */
+
+#define USART_InvPin_Tx USART_CR2_TXINV
+#define USART_InvPin_Rx USART_CR2_RXINV
+#define IS_USART_INVERSTION_PIN(PIN) ((((PIN) & (uint32_t)0xFFFCFFFF) == 0x00) && \
+ ((PIN) != (uint32_t)0x00))
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_AutoBaudRate_Mode
+ * @{
+ */
+
+#define USART_AutoBaudRate_StartBit ((uint32_t)0x00000000)
+#define USART_AutoBaudRate_FallingEdge USART_CR2_ABRMODE_0
+#define USART_AutoBaudRate_0x7FFrame USART_CR2_ABRMODE_1
+#define USART_AutoBaudRate_0x55Frame (USART_CR2_ABRMODE_0 | USART_CR2_ABRMODE_1)
+#define IS_USART_AUTOBAUDRATE_MODE(MODE) (((MODE) == USART_AutoBaudRate_StartBit) || \
+ ((MODE) == USART_AutoBaudRate_FallingEdge) || \
+ ((MODE) == USART_AutoBaudRate_0x7FFrame) || \
+ ((MODE) == USART_AutoBaudRate_0x55Frame))
+/**
+ * @}
+ */
+
+/** @defgroup USART_OVR_DETECTION
+ * @{
+ */
+
+#define USART_OVRDetection_Enable ((uint32_t)0x00000000)
+#define USART_OVRDetection_Disable USART_CR3_OVRDIS
+#define IS_USART_OVRDETECTION(OVR) (((OVR) == USART_OVRDetection_Enable)|| \
+ ((OVR) == USART_OVRDetection_Disable))
+/**
+ * @}
+ */
+/** @defgroup USART_Request
+ * @{
+ */
+
+#define USART_Request_ABRRQ USART_RQR_ABRRQ
+#define USART_Request_SBKRQ USART_RQR_SBKRQ
+#define USART_Request_MMRQ USART_RQR_MMRQ
+#define USART_Request_RXFRQ USART_RQR_RXFRQ
+#define USART_Request_TXFRQ USART_RQR_TXFRQ
+
+#define IS_USART_REQUEST(REQUEST) (((REQUEST) == USART_Request_TXFRQ) || \
+ ((REQUEST) == USART_Request_RXFRQ) || \
+ ((REQUEST) == USART_Request_MMRQ) || \
+ ((REQUEST) == USART_Request_SBKRQ) || \
+ ((REQUEST) == USART_Request_ABRRQ))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Flags
+ * @{
+ */
+#define USART_FLAG_REACK USART_ISR_REACK
+#define USART_FLAG_TEACK USART_ISR_TEACK
+#define USART_FLAG_WU USART_ISR_WUF
+#define USART_FLAG_RWU USART_ISR_RWU
+#define USART_FLAG_SBK USART_ISR_SBKF
+#define USART_FLAG_CM USART_ISR_CMF
+#define USART_FLAG_BUSY USART_ISR_BUSY
+#define USART_FLAG_ABRF USART_ISR_ABRF
+#define USART_FLAG_ABRE USART_ISR_ABRE
+#define USART_FLAG_EOB USART_ISR_EOBF
+#define USART_FLAG_RTO USART_ISR_RTOF
+#define USART_FLAG_nCTSS USART_ISR_CTS
+#define USART_FLAG_CTS USART_ISR_CTSIF
+#define USART_FLAG_LBD USART_ISR_LBD
+#define USART_FLAG_TXE USART_ISR_TXE
+#define USART_FLAG_TC USART_ISR_TC
+#define USART_FLAG_RXNE USART_ISR_RXNE
+#define USART_FLAG_IDLE USART_ISR_IDLE
+#define USART_FLAG_ORE USART_ISR_ORE
+#define USART_FLAG_NE USART_ISR_NE
+#define USART_FLAG_FE USART_ISR_FE
+#define USART_FLAG_PE USART_ISR_PE
+#define IS_USART_FLAG(FLAG) (((FLAG) == USART_FLAG_PE) || ((FLAG) == USART_FLAG_TXE) || \
+ ((FLAG) == USART_FLAG_TC) || ((FLAG) == USART_FLAG_RXNE) || \
+ ((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_LBD) || \
+ ((FLAG) == USART_FLAG_CTS) || ((FLAG) == USART_FLAG_ORE) || \
+ ((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE) || \
+ ((FLAG) == USART_FLAG_nCTSS) || ((FLAG) == USART_FLAG_RTO) || \
+ ((FLAG) == USART_FLAG_EOB) || ((FLAG) == USART_FLAG_ABRE) || \
+ ((FLAG) == USART_FLAG_ABRF) || ((FLAG) == USART_FLAG_BUSY) || \
+ ((FLAG) == USART_FLAG_CM) || ((FLAG) == USART_FLAG_SBK) || \
+ ((FLAG) == USART_FLAG_RWU) || ((FLAG) == USART_FLAG_WU) || \
+ ((FLAG) == USART_FLAG_TEACK)|| ((FLAG) == USART_FLAG_REACK))
+
+#define IS_USART_CLEAR_FLAG(FLAG) (((FLAG) == USART_FLAG_WU) || ((FLAG) == USART_FLAG_TC) || \
+ ((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_ORE) || \
+ ((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE) || \
+ ((FLAG) == USART_FLAG_LBD) || ((FLAG) == USART_FLAG_CTS) || \
+ ((FLAG) == USART_FLAG_RTO) || ((FLAG) == USART_FLAG_EOB) || \
+ ((FLAG) == USART_FLAG_CM) || ((FLAG) == USART_FLAG_PE))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Interrupt_definition
+ * @brief USART Interrupt definition
+ * USART_IT possible values
+ * Elements values convention: 0xZZZZYYXX
+ * XX: Position of the corresponding Interrupt
+ * YY: Register index
+ * ZZZZ: Flag position
+ * @{
+ */
+
+#define USART_IT_WU ((uint32_t)0x00140316)
+#define USART_IT_CM ((uint32_t)0x0011010E)
+#define USART_IT_EOB ((uint32_t)0x000C011B)
+#define USART_IT_RTO ((uint32_t)0x000B011A)
+#define USART_IT_PE ((uint32_t)0x00000108)
+#define USART_IT_TXE ((uint32_t)0x00070107)
+#define USART_IT_TC ((uint32_t)0x00060106)
+#define USART_IT_RXNE ((uint32_t)0x00050105)
+#define USART_IT_IDLE ((uint32_t)0x00040104)
+#define USART_IT_LBD ((uint32_t)0x00080206)
+#define USART_IT_CTS ((uint32_t)0x0009030A)
+#define USART_IT_ERR ((uint32_t)0x00000300)
+#define USART_IT_ORE ((uint32_t)0x00030300)
+#define USART_IT_NE ((uint32_t)0x00020300)
+#define USART_IT_FE ((uint32_t)0x00010300)
+
+#define IS_USART_CONFIG_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \
+ ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
+ ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \
+ ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ERR) || \
+ ((IT) == USART_IT_RTO) || ((IT) == USART_IT_EOB) || \
+ ((IT) == USART_IT_CM) || ((IT) == USART_IT_WU))
+
+#define IS_USART_GET_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \
+ ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
+ ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \
+ ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ORE) || \
+ ((IT) == USART_IT_NE) || ((IT) == USART_IT_FE) || \
+ ((IT) == USART_IT_RTO) || ((IT) == USART_IT_EOB) || \
+ ((IT) == USART_IT_CM) || ((IT) == USART_IT_WU))
+
+#define IS_USART_CLEAR_IT(IT) (((IT) == USART_IT_TC) || ((IT) == USART_IT_PE) || \
+ ((IT) == USART_IT_FE) || ((IT) == USART_IT_NE) || \
+ ((IT) == USART_IT_ORE) || ((IT) == USART_IT_IDLE) || \
+ ((IT) == USART_IT_LBD) || ((IT) == USART_IT_CTS) || \
+ ((IT) == USART_IT_RTO) || ((IT) == USART_IT_EOB) || \
+ ((IT) == USART_IT_CM) || ((IT) == USART_IT_WU))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Global_definition
+ * @{
+ */
+
+#define IS_USART_BAUDRATE(BAUDRATE) (((BAUDRATE) > 0) && ((BAUDRATE) < 0x005B8D81))
+#define IS_USART_DE_ASSERTION_DEASSERTION_TIME(TIME) ((TIME) <= 0x1F)
+#define IS_USART_AUTO_RETRY_COUNTER(COUNTER) ((COUNTER) <= 0x7)
+#define IS_USART_TIMEOUT(TIMEOUT) ((TIMEOUT) <= 0x00FFFFFF)
+#define IS_USART_DATA(DATA) ((DATA) <= 0x1FF)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+/* Initialization and Configuration functions *********************************/
+void USART_DeInit(USART_TypeDef* USARTx);
+void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct);
+void USART_StructInit(USART_InitTypeDef* USART_InitStruct);
+void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct);
+void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct);
+void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_DirectionModeCmd(USART_TypeDef* USARTx, uint32_t USART_DirectionMode, FunctionalState NewState);
+void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler);
+void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_MSBFirstCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_DataInvCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_InvPinCmd(USART_TypeDef* USARTx, uint32_t USART_InvPin, FunctionalState NewState);
+void USART_SWAPPinCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_ReceiverTimeOutCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_SetReceiverTimeOut(USART_TypeDef* USARTx, uint32_t USART_ReceiverTimeOut);
+
+/* STOP Mode functions ********************************************************/
+void USART_STOPModeCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_StopModeWakeUpSourceConfig(USART_TypeDef* USARTx, uint32_t USART_WakeUpSource);
+
+/* AutoBaudRate functions *****************************************************/
+void USART_AutoBaudRateCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_AutoBaudRateConfig(USART_TypeDef* USARTx, uint32_t USART_AutoBaudRate);
+
+/* Data transfers functions ***************************************************/
+void USART_SendData(USART_TypeDef* USARTx, uint16_t Data);
+uint16_t USART_ReceiveData(USART_TypeDef* USARTx);
+
+/* Multi-Processor Communication functions ************************************/
+void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address);
+void USART_MuteModeWakeUpConfig(USART_TypeDef* USARTx, uint32_t USART_WakeUp);
+void USART_MuteModeCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_AddressDetectionConfig(USART_TypeDef* USARTx, uint32_t USART_AddressLength);
+/* LIN mode functions *********************************************************/
+void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint32_t USART_LINBreakDetectLength);
+void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+
+/* Half-duplex mode function **************************************************/
+void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+
+/* Smartcard mode functions ***************************************************/
+void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime);
+void USART_SetAutoRetryCount(USART_TypeDef* USARTx, uint8_t USART_AutoCount);
+void USART_SetBlockLength(USART_TypeDef* USARTx, uint8_t USART_BlockLength);
+
+/* IrDA mode functions ********************************************************/
+void USART_IrDAConfig(USART_TypeDef* USARTx, uint32_t USART_IrDAMode);
+void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState);
+
+/* RS485 mode functions *******************************************************/
+void USART_DECmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_DEPolarityConfig(USART_TypeDef* USARTx, uint32_t USART_DEPolarity);
+void USART_SetDEAssertionTime(USART_TypeDef* USARTx, uint32_t USART_DEAssertionTime);
+void USART_SetDEDeassertionTime(USART_TypeDef* USARTx, uint32_t USART_DEDeassertionTime);
+
+/* DMA transfers management functions *****************************************/
+void USART_DMACmd(USART_TypeDef* USARTx, uint32_t USART_DMAReq, FunctionalState NewState);
+void USART_DMAReceptionErrorConfig(USART_TypeDef* USARTx, uint32_t USART_DMAOnError);
+
+/* Interrupts and flags management functions **********************************/
+void USART_ITConfig(USART_TypeDef* USARTx, uint32_t USART_IT, FunctionalState NewState);
+void USART_RequestCmd(USART_TypeDef* USARTx, uint32_t USART_Request, FunctionalState NewState);
+void USART_OverrunDetectionConfig(USART_TypeDef* USARTx, uint32_t USART_OVRDetection);
+FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint32_t USART_FLAG);
+void USART_ClearFlag(USART_TypeDef* USARTx, uint32_t USART_FLAG);
+ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint32_t USART_IT);
+void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint32_t USART_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F30x_USART_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-09 23:08:15 +0000