diff options
Diffstat (limited to 'thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc')
17 files changed, 6792 insertions, 0 deletions
diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/misc.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/misc.h new file mode 100644 index 0000000..17aa038 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/misc.h @@ -0,0 +1,202 @@ +/** + ****************************************************************************** + * @file misc.h + * @author MCD Application Team + * @version V1.1.1 + * @date 05-March-2012 + * @brief This file contains all the functions prototypes for the miscellaneous + * firmware library functions (add-on to CMSIS functions). + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MISC_H +#define __MISC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup MISC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief NVIC Init Structure definition + */ + +typedef struct +{ + uint8_t NVIC_IRQChannel; /*!< Specifies the IRQ channel to be enabled or disabled. + This parameter can be a value of @ref IRQn_Type + (For the complete STM32 Devices IRQ Channels list, please + refer to stm32l1xx.h file) */ + + uint8_t NVIC_IRQChannelPreemptionPriority; /*!< Specifies the pre-emption priority for the IRQ channel + specified in NVIC_IRQChannel. This parameter can be a value + between 0 and 15 as described in the table @ref NVIC_Priority_Table */ + + uint8_t NVIC_IRQChannelSubPriority; /*!< Specifies the subpriority level for the IRQ channel specified + in NVIC_IRQChannel. This parameter can be a value + between 0 and 15 as described in the table @ref NVIC_Priority_Table */ + + FunctionalState NVIC_IRQChannelCmd; /*!< Specifies whether the IRQ channel defined in NVIC_IRQChannel + will be enabled or disabled. + This parameter can be set either to ENABLE or DISABLE */ +} NVIC_InitTypeDef; + +/** + * +@verbatim + The table below gives the allowed values of the pre-emption priority and subpriority according + to the Priority Grouping configuration performed by NVIC_PriorityGroupConfig function + ============================================================================================================================ + NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description + ============================================================================================================================ + NVIC_PriorityGroup_0 | 0 | 0-15 | 0 bits for pre-emption priority + | | | 4 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_1 | 0-1 | 0-7 | 1 bits for pre-emption priority + | | | 3 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_2 | 0-3 | 0-3 | 2 bits for pre-emption priority + | | | 2 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_3 | 0-7 | 0-1 | 3 bits for pre-emption priority + | | | 1 bits for subpriority + ---------------------------------------------------------------------------------------------------------------------------- + NVIC_PriorityGroup_4 | 0-15 | 0 | 4 bits for pre-emption priority + | | | 0 bits for subpriority + ============================================================================================================================ +@endverbatim +*/ + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup MISC_Exported_Constants + * @{ + */ + +/** @defgroup Vector_Table_Base + * @{ + */ + +#define NVIC_VectTab_RAM ((uint32_t)0x20000000) +#define NVIC_VectTab_FLASH ((uint32_t)0x08000000) +#define IS_NVIC_VECTTAB(VECTTAB) (((VECTTAB) == NVIC_VectTab_RAM) || \ + ((VECTTAB) == NVIC_VectTab_FLASH)) +/** + * @} + */ + +/** @defgroup System_Low_Power + * @{ + */ + +#define NVIC_LP_SEVONPEND ((uint8_t)0x10) +#define NVIC_LP_SLEEPDEEP ((uint8_t)0x04) +#define NVIC_LP_SLEEPONEXIT ((uint8_t)0x02) +#define IS_NVIC_LP(LP) (((LP) == NVIC_LP_SEVONPEND) || \ + ((LP) == NVIC_LP_SLEEPDEEP) || \ + ((LP) == NVIC_LP_SLEEPONEXIT)) +/** + * @} + */ + +/** @defgroup Preemption_Priority_Group + * @{ + */ + +#define NVIC_PriorityGroup_0 ((uint32_t)0x700) /*!< 0 bits for pre-emption priority + 4 bits for subpriority */ +#define NVIC_PriorityGroup_1 ((uint32_t)0x600) /*!< 1 bits for pre-emption priority + 3 bits for subpriority */ +#define NVIC_PriorityGroup_2 ((uint32_t)0x500) /*!< 2 bits for pre-emption priority + 2 bits for subpriority */ +#define NVIC_PriorityGroup_3 ((uint32_t)0x400) /*!< 3 bits for pre-emption priority + 1 bits for subpriority */ +#define NVIC_PriorityGroup_4 ((uint32_t)0x300) /*!< 4 bits for pre-emption priority + 0 bits for subpriority */ + +#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PriorityGroup_0) || \ + ((GROUP) == NVIC_PriorityGroup_1) || \ + ((GROUP) == NVIC_PriorityGroup_2) || \ + ((GROUP) == NVIC_PriorityGroup_3) || \ + ((GROUP) == NVIC_PriorityGroup_4)) + +#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) + +#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) + +#define IS_NVIC_OFFSET(OFFSET) ((OFFSET) < 0x0005FFFF) + +/** + * @} + */ + +/** @defgroup SysTick_clock_source + * @{ + */ + +#define SysTick_CLKSource_HCLK_Div8 ((uint32_t)0xFFFFFFFB) +#define SysTick_CLKSource_HCLK ((uint32_t)0x00000004) +#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SysTick_CLKSource_HCLK) || \ + ((SOURCE) == SysTick_CLKSource_HCLK_Div8)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup); +void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct); +void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset); +void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState); +void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource); + +#ifdef __cplusplus +} +#endif + +#endif /* __MISC_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_adc.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_adc.h new file mode 100644 index 0000000..ea49833 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_adc.h @@ -0,0 +1,650 @@ +/** + ****************************************************************************** + * @file stm32l1xx_adc.h + * @author MCD Application Team + * @version V1.1.1 + * @date 05-March-2012 + * @brief This file contains all the functions prototypes for the ADC firmware + * library. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_ADC_H +#define __STM32L1xx_ADC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup ADC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief ADC Init structure definition + */ + +typedef struct +{ + uint32_t ADC_Resolution; /*!< Selects the resolution of the conversion. + This parameter can be a value of @ref ADC_Resolution */ + + FunctionalState ADC_ScanConvMode; /*!< Specifies whether the conversion is performed in + Scan (multichannel) or Single (one channel) mode. + This parameter can be set to ENABLE or DISABLE */ + + FunctionalState ADC_ContinuousConvMode; /*!< Specifies whether the conversion is performed in + Continuous or Single mode. + This parameter can be set to ENABLE or DISABLE. */ + + uint32_t ADC_ExternalTrigConvEdge; /*!< Selects the external trigger Edge and enables the + trigger of a regular group. This parameter can be a value + of @ref ADC_external_trigger_edge_for_regular_channels_conversion */ + + uint32_t ADC_ExternalTrigConv; /*!< Defines the external trigger used to start the analog + to digital conversion of regular channels. This parameter + can be a value of @ref ADC_external_trigger_sources_for_regular_channels_conversion */ + + uint32_t ADC_DataAlign; /*!< Specifies whether the ADC data alignment is left or right. + This parameter can be a value of @ref ADC_data_align */ + + uint8_t ADC_NbrOfConversion; /*!< Specifies the number of ADC conversions that will be done + using the sequencer for regular channel group. + This parameter must range from 1 to 27. */ +}ADC_InitTypeDef; + +typedef struct +{ + uint32_t ADC_Prescaler; /*!< Selects the ADC prescaler. + This parameter can be a value + of @ref ADC_Prescaler */ +}ADC_CommonInitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup ADC_Exported_Constants + * @{ + */ +#define IS_ADC_ALL_PERIPH(PERIPH) ((PERIPH) == ADC1) +#define IS_ADC_DMA_PERIPH(PERIPH) ((PERIPH) == ADC1) + +/** @defgroup ADC_Power_down_during_Idle_and_or_Delay_phase + * @{ + */ +#define ADC_PowerDown_Delay ((uint32_t)0x00010000) +#define ADC_PowerDown_Idle ((uint32_t)0x00020000) +#define ADC_PowerDown_Idle_Delay ((uint32_t)0x00030000) + +#define IS_ADC_POWER_DOWN(DWON) (((DWON) == ADC_PowerDown_Delay) || \ + ((DWON) == ADC_PowerDown_Idle) || \ + ((DWON) == ADC_PowerDown_Idle_Delay)) +/** + * @} + */ + + +/** @defgroup ADC_Prescaler + * @{ + */ +#define ADC_Prescaler_Div1 ((uint32_t)0x00000000) +#define ADC_Prescaler_Div2 ((uint32_t)0x00010000) +#define ADC_Prescaler_Div4 ((uint32_t)0x00020000) + +#define IS_ADC_PRESCALER(PRESCALER) (((PRESCALER) == ADC_Prescaler_Div1) || \ + ((PRESCALER) == ADC_Prescaler_Div2) || \ + ((PRESCALER) == ADC_Prescaler_Div4)) +/** + * @} + */ + + + +/** @defgroup ADC_Resolution + * @{ + */ +#define ADC_Resolution_12b ((uint32_t)0x00000000) +#define ADC_Resolution_10b ((uint32_t)0x01000000) +#define ADC_Resolution_8b ((uint32_t)0x02000000) +#define ADC_Resolution_6b ((uint32_t)0x03000000) + +#define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_Resolution_12b) || \ + ((RESOLUTION) == ADC_Resolution_10b) || \ + ((RESOLUTION) == ADC_Resolution_8b) || \ + ((RESOLUTION) == ADC_Resolution_6b)) + +/** + * @} + */ + +/** @defgroup ADC_external_trigger_edge_for_regular_channels_conversion + * @{ + */ +#define ADC_ExternalTrigConvEdge_None ((uint32_t)0x00000000) +#define ADC_ExternalTrigConvEdge_Rising ((uint32_t)0x10000000) +#define ADC_ExternalTrigConvEdge_Falling ((uint32_t)0x20000000) +#define ADC_ExternalTrigConvEdge_RisingFalling ((uint32_t)0x30000000) + +#define IS_ADC_EXT_TRIG_EDGE(EDGE) (((EDGE) == ADC_ExternalTrigConvEdge_None) || \ + ((EDGE) == ADC_ExternalTrigConvEdge_Rising) || \ + ((EDGE) == ADC_ExternalTrigConvEdge_Falling) || \ + ((EDGE) == ADC_ExternalTrigConvEdge_RisingFalling)) +/** + * @} + */ + +/** @defgroup ADC_external_trigger_sources_for_regular_channels_conversion + * @{ + */ + +/* TIM2 */ +#define ADC_ExternalTrigConv_T2_CC3 ((uint32_t)0x02000000) +#define ADC_ExternalTrigConv_T2_CC2 ((uint32_t)0x03000000) +#define ADC_ExternalTrigConv_T2_TRGO ((uint32_t)0x06000000) + +/* TIM3 */ +#define ADC_ExternalTrigConv_T3_CC1 ((uint32_t)0x07000000) +#define ADC_ExternalTrigConv_T3_CC3 ((uint32_t)0x08000000) +#define ADC_ExternalTrigConv_T3_TRGO ((uint32_t)0x04000000) + +/* TIM4 */ +#define ADC_ExternalTrigConv_T4_CC4 ((uint32_t)0x05000000) +#define ADC_ExternalTrigConv_T4_TRGO ((uint32_t)0x09000000) + +/* TIM6 */ +#define ADC_ExternalTrigConv_T6_TRGO ((uint32_t)0x0A000000) + +/* TIM9 */ +#define ADC_ExternalTrigConv_T9_CC2 ((uint32_t)0x00000000) +#define ADC_ExternalTrigConv_T9_TRGO ((uint32_t)0x01000000) + +/* EXTI */ +#define ADC_ExternalTrigConv_Ext_IT11 ((uint32_t)0x0F000000) + +#define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_ExternalTrigConv_T9_CC2) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T9_TRGO) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T2_CC3) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T2_CC2) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T3_TRGO) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T4_CC4) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T2_TRGO) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T3_CC1) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T3_CC3) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T4_TRGO) || \ + ((REGTRIG) == ADC_ExternalTrigConv_T6_TRGO) || \ + ((REGTRIG) == ADC_ExternalTrigConv_Ext_IT11)) +/** + * @} + */ + +/** @defgroup ADC_data_align + * @{ + */ + +#define ADC_DataAlign_Right ((uint32_t)0x00000000) +#define ADC_DataAlign_Left ((uint32_t)0x00000800) + +#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DataAlign_Right) || \ + ((ALIGN) == ADC_DataAlign_Left)) +/** + * @} + */ + +/** @defgroup ADC_channels + * @{ + */ +/* ADC Bank A Channels -------------------------------------------------------*/ +#define ADC_Channel_0 ((uint8_t)0x00) +#define ADC_Channel_1 ((uint8_t)0x01) +#define ADC_Channel_2 ((uint8_t)0x02) +#define ADC_Channel_3 ((uint8_t)0x03) + +#define ADC_Channel_6 ((uint8_t)0x06) +#define ADC_Channel_7 ((uint8_t)0x07) +#define ADC_Channel_8 ((uint8_t)0x08) +#define ADC_Channel_9 ((uint8_t)0x09) +#define ADC_Channel_10 ((uint8_t)0x0A) +#define ADC_Channel_11 ((uint8_t)0x0B) +#define ADC_Channel_12 ((uint8_t)0x0C) + + +/* ADC Bank B Channels -------------------------------------------------------*/ +#define ADC_Channel_0b ADC_Channel_0 +#define ADC_Channel_1b ADC_Channel_1 +#define ADC_Channel_2b ADC_Channel_2 +#define ADC_Channel_3b ADC_Channel_3 + +#define ADC_Channel_6b ADC_Channel_6 +#define ADC_Channel_7b ADC_Channel_7 +#define ADC_Channel_8b ADC_Channel_8 +#define ADC_Channel_9b ADC_Channel_9 +#define ADC_Channel_10b ADC_Channel_10 +#define ADC_Channel_11b ADC_Channel_11 +#define ADC_Channel_12b ADC_Channel_12 + +/* ADC Common Channels (ADC Bank A and B) ------------------------------------*/ +#define ADC_Channel_4 ((uint8_t)0x04) +#define ADC_Channel_5 ((uint8_t)0x05) + +#define ADC_Channel_13 ((uint8_t)0x0D) +#define ADC_Channel_14 ((uint8_t)0x0E) +#define ADC_Channel_15 ((uint8_t)0x0F) +#define ADC_Channel_16 ((uint8_t)0x10) +#define ADC_Channel_17 ((uint8_t)0x11) +#define ADC_Channel_18 ((uint8_t)0x12) +#define ADC_Channel_19 ((uint8_t)0x13) +#define ADC_Channel_20 ((uint8_t)0x14) +#define ADC_Channel_21 ((uint8_t)0x15) +#define ADC_Channel_22 ((uint8_t)0x16) +#define ADC_Channel_23 ((uint8_t)0x17) +#define ADC_Channel_24 ((uint8_t)0x18) +#define ADC_Channel_25 ((uint8_t)0x19) + +#define ADC_Channel_27 ((uint8_t)0x1B) +#define ADC_Channel_28 ((uint8_t)0x1C) +#define ADC_Channel_29 ((uint8_t)0x1D) +#define ADC_Channel_30 ((uint8_t)0x1E) +#define ADC_Channel_31 ((uint8_t)0x1F) + +#define ADC_Channel_TempSensor ((uint8_t)ADC_Channel_16) +#define ADC_Channel_Vrefint ((uint8_t)ADC_Channel_17) + +#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_Channel_0) || ((CHANNEL) == ADC_Channel_1) || \ + ((CHANNEL) == ADC_Channel_2) || ((CHANNEL) == ADC_Channel_3) || \ + ((CHANNEL) == ADC_Channel_4) || ((CHANNEL) == ADC_Channel_5) || \ + ((CHANNEL) == ADC_Channel_6) || ((CHANNEL) == ADC_Channel_7) || \ + ((CHANNEL) == ADC_Channel_8) || ((CHANNEL) == ADC_Channel_9) || \ + ((CHANNEL) == ADC_Channel_10) || ((CHANNEL) == ADC_Channel_11) || \ + ((CHANNEL) == ADC_Channel_12) || ((CHANNEL) == ADC_Channel_13) || \ + ((CHANNEL) == ADC_Channel_14) || ((CHANNEL) == ADC_Channel_15) || \ + ((CHANNEL) == ADC_Channel_16) || ((CHANNEL) == ADC_Channel_17) || \ + ((CHANNEL) == ADC_Channel_18) || ((CHANNEL) == ADC_Channel_19) || \ + ((CHANNEL) == ADC_Channel_20) || ((CHANNEL) == ADC_Channel_21) || \ + ((CHANNEL) == ADC_Channel_22) || ((CHANNEL) == ADC_Channel_23) || \ + ((CHANNEL) == ADC_Channel_24) || ((CHANNEL) == ADC_Channel_25) || \ + ((CHANNEL) == ADC_Channel_27) || ((CHANNEL) == ADC_Channel_28) || \ + ((CHANNEL) == ADC_Channel_29) || ((CHANNEL) == ADC_Channel_30) || \ + ((CHANNEL) == ADC_Channel_31)) +/** + * @} + */ + +/** @defgroup ADC_sampling_times + * @{ + */ + +#define ADC_SampleTime_4Cycles ((uint8_t)0x00) +#define ADC_SampleTime_9Cycles ((uint8_t)0x01) +#define ADC_SampleTime_16Cycles ((uint8_t)0x02) +#define ADC_SampleTime_24Cycles ((uint8_t)0x03) +#define ADC_SampleTime_48Cycles ((uint8_t)0x04) +#define ADC_SampleTime_96Cycles ((uint8_t)0x05) +#define ADC_SampleTime_192Cycles ((uint8_t)0x06) +#define ADC_SampleTime_384Cycles ((uint8_t)0x07) + +#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SampleTime_4Cycles) || \ + ((TIME) == ADC_SampleTime_9Cycles) || \ + ((TIME) == ADC_SampleTime_16Cycles) || \ + ((TIME) == ADC_SampleTime_24Cycles) || \ + ((TIME) == ADC_SampleTime_48Cycles) || \ + ((TIME) == ADC_SampleTime_96Cycles) || \ + ((TIME) == ADC_SampleTime_192Cycles) || \ + ((TIME) == ADC_SampleTime_384Cycles)) +/** + * @} + */ + +/** @defgroup ADC_Delay_length + * @{ + */ + +#define ADC_DelayLength_None ((uint8_t)0x00) +#define ADC_DelayLength_Freeze ((uint8_t)0x10) +#define ADC_DelayLength_7Cycles ((uint8_t)0x20) +#define ADC_DelayLength_15Cycles ((uint8_t)0x30) +#define ADC_DelayLength_31Cycles ((uint8_t)0x40) +#define ADC_DelayLength_63Cycles ((uint8_t)0x50) +#define ADC_DelayLength_127Cycles ((uint8_t)0x60) +#define ADC_DelayLength_255Cycles ((uint8_t)0x70) + +#define IS_ADC_DELAY_LENGTH(LENGTH) (((LENGTH) == ADC_DelayLength_None) || \ + ((LENGTH) == ADC_DelayLength_Freeze) || \ + ((LENGTH) == ADC_DelayLength_7Cycles) || \ + ((LENGTH) == ADC_DelayLength_15Cycles) || \ + ((LENGTH) == ADC_DelayLength_31Cycles) || \ + ((LENGTH) == ADC_DelayLength_63Cycles) || \ + ((LENGTH) == ADC_DelayLength_127Cycles) || \ + ((LENGTH) == ADC_DelayLength_255Cycles)) + +/** + * @} + */ + +/** @defgroup ADC_external_trigger_edge_for_injected_channels_conversion + * @{ + */ +#define ADC_ExternalTrigInjecConvEdge_None ((uint32_t)0x00000000) +#define ADC_ExternalTrigInjecConvEdge_Rising ((uint32_t)0x00100000) +#define ADC_ExternalTrigInjecConvEdge_Falling ((uint32_t)0x00200000) +#define ADC_ExternalTrigInjecConvEdge_RisingFalling ((uint32_t)0x00300000) + +#define IS_ADC_EXT_INJEC_TRIG_EDGE(EDGE) (((EDGE) == ADC_ExternalTrigInjecConvEdge_None) || \ + ((EDGE) == ADC_ExternalTrigInjecConvEdge_Rising) || \ + ((EDGE) == ADC_ExternalTrigInjecConvEdge_Falling) || \ + ((EDGE) == ADC_ExternalTrigInjecConvEdge_RisingFalling)) +/** + * @} + */ + + +/** @defgroup ADC_external_trigger_sources_for_injected_channels_conversion + * @{ + */ + + +/* TIM2 */ +#define ADC_ExternalTrigInjecConv_T2_TRGO ((uint32_t)0x00020000) +#define ADC_ExternalTrigInjecConv_T2_CC1 ((uint32_t)0x00030000) + +/* TIM3 */ +#define ADC_ExternalTrigInjecConv_T3_CC4 ((uint32_t)0x00040000) + +/* TIM4 */ +#define ADC_ExternalTrigInjecConv_T4_TRGO ((uint32_t)0x00050000) +#define ADC_ExternalTrigInjecConv_T4_CC1 ((uint32_t)0x00060000) +#define ADC_ExternalTrigInjecConv_T4_CC2 ((uint32_t)0x00070000) +#define ADC_ExternalTrigInjecConv_T4_CC3 ((uint32_t)0x00080000) + +/* TIM7 */ +#define ADC_ExternalTrigInjecConv_T7_TRGO ((uint32_t)0x000A0000) + +/* TIM9 */ +#define ADC_ExternalTrigInjecConv_T9_CC1 ((uint32_t)0x00000000) +#define ADC_ExternalTrigInjecConv_T9_TRGO ((uint32_t)0x00010000) + +/* TIM10 */ +#define ADC_ExternalTrigInjecConv_T10_CC1 ((uint32_t)0x00090000) + +/* EXTI */ +#define ADC_ExternalTrigInjecConv_Ext_IT15 ((uint32_t)0x000F0000) + +#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_ExternalTrigInjecConv_T9_CC1) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T9_TRGO) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_TRGO) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_CC1) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T3_CC4) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_TRGO) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_CC1) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_CC2) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_CC3) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T10_CC1) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_T7_TRGO) || \ + ((INJTRIG) == ADC_ExternalTrigInjecConv_Ext_IT15)) +/** + * @} + */ + +/** @defgroup ADC_injected_channel_selection + * @{ + */ +#define ADC_InjectedChannel_1 ((uint8_t)0x18) +#define ADC_InjectedChannel_2 ((uint8_t)0x1C) +#define ADC_InjectedChannel_3 ((uint8_t)0x20) +#define ADC_InjectedChannel_4 ((uint8_t)0x24) + +#define IS_ADC_INJECTED_CHANNEL(CHANNEL) (((CHANNEL) == ADC_InjectedChannel_1) || \ + ((CHANNEL) == ADC_InjectedChannel_2) || \ + ((CHANNEL) == ADC_InjectedChannel_3) || \ + ((CHANNEL) == ADC_InjectedChannel_4)) +/** + * @} + */ + +/** @defgroup ADC_analog_watchdog_selection + * @{ + */ + +#define ADC_AnalogWatchdog_SingleRegEnable ((uint32_t)0x00800200) +#define ADC_AnalogWatchdog_SingleInjecEnable ((uint32_t)0x00400200) +#define ADC_AnalogWatchdog_SingleRegOrInjecEnable ((uint32_t)0x00C00200) +#define ADC_AnalogWatchdog_AllRegEnable ((uint32_t)0x00800000) +#define ADC_AnalogWatchdog_AllInjecEnable ((uint32_t)0x00400000) +#define ADC_AnalogWatchdog_AllRegAllInjecEnable ((uint32_t)0x00C00000) +#define ADC_AnalogWatchdog_None ((uint32_t)0x00000000) + +#define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_AnalogWatchdog_SingleRegEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_SingleInjecEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_SingleRegOrInjecEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_AllRegEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_AllInjecEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_AllRegAllInjecEnable) || \ + ((WATCHDOG) == ADC_AnalogWatchdog_None)) +/** + * @} + */ + +/** @defgroup ADC_interrupts_definition + * @{ + */ + +#define ADC_IT_AWD ((uint16_t)0x0106) +#define ADC_IT_EOC ((uint16_t)0x0205) +#define ADC_IT_JEOC ((uint16_t)0x0407) +#define ADC_IT_OVR ((uint16_t)0x201A) + +#define IS_ADC_IT(IT) (((IT) == ADC_IT_AWD) || ((IT) == ADC_IT_EOC) || \ + ((IT) == ADC_IT_JEOC)|| ((IT) == ADC_IT_OVR)) +/** + * @} + */ + +/** @defgroup ADC_flags_definition + * @{ + */ + +#define ADC_FLAG_AWD ((uint16_t)0x0001) +#define ADC_FLAG_EOC ((uint16_t)0x0002) +#define ADC_FLAG_JEOC ((uint16_t)0x0004) +#define ADC_FLAG_JSTRT ((uint16_t)0x0008) +#define ADC_FLAG_STRT ((uint16_t)0x0010) +#define ADC_FLAG_OVR ((uint16_t)0x0020) +#define ADC_FLAG_ADONS ((uint16_t)0x0040) +#define ADC_FLAG_RCNR ((uint16_t)0x0100) +#define ADC_FLAG_JCNR ((uint16_t)0x0200) + +#define IS_ADC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFFC0) == 0x00) && ((FLAG) != 0x00)) + +#define IS_ADC_GET_FLAG(FLAG) (((FLAG) == ADC_FLAG_AWD) || ((FLAG) == ADC_FLAG_EOC) || \ + ((FLAG) == ADC_FLAG_JEOC) || ((FLAG)== ADC_FLAG_JSTRT) || \ + ((FLAG) == ADC_FLAG_STRT) || ((FLAG)== ADC_FLAG_OVR) || \ + ((FLAG) == ADC_FLAG_ADONS) || ((FLAG)== ADC_FLAG_RCNR) || \ + ((FLAG) == ADC_FLAG_JCNR)) +/** + * @} + */ + +/** @defgroup ADC_thresholds + * @{ + */ + +#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= 0xFFF) + +/** + * @} + */ + +/** @defgroup ADC_injected_offset + * @{ + */ + +#define IS_ADC_OFFSET(OFFSET) ((OFFSET) <= 0xFFF) + +/** + * @} + */ + +/** @defgroup ADC_injected_length + * @{ + */ + +#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x4)) + +/** + * @} + */ + +/** @defgroup ADC_injected_rank + * @{ + */ + +#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x4)) + +/** + * @} + */ + +/** @defgroup ADC_regular_length + * @{ + */ + +#define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= 1) && ((LENGTH) <= 28)) + +/** + * @} + */ + +/** @defgroup ADC_regular_rank + * @{ + */ + +#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= 1) && ((RANK) <= 28)) + +/** + * @} + */ + +/** @defgroup ADC_regular_discontinuous_mode_number + * @{ + */ + +#define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= 0x1) && ((NUMBER) <= 0x8)) + +/** + * @} + */ + +/** @defgroup ADC_Bank_Selection + * @{ + */ +#define ADC_Bank_A ((uint8_t)0x00) +#define ADC_Bank_B ((uint8_t)0x01) +#define IS_ADC_BANK(BANK) (((BANK) == ADC_Bank_A) || ((BANK) == ADC_Bank_B)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/* Function used to set the ADC configuration to the default reset state *****/ +void ADC_DeInit(ADC_TypeDef* ADCx); + +/* Initialization and Configuration functions *********************************/ +void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct); +void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct); +void ADC_CommonInit(ADC_CommonInitTypeDef* ADC_CommonInitStruct); +void ADC_CommonStructInit(ADC_CommonInitTypeDef* ADC_CommonInitStruct); +void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_BankSelection(ADC_TypeDef* ADCx, uint8_t ADC_Bank); + +/* Power saving functions *****************************************************/ +void ADC_PowerDownCmd(ADC_TypeDef* ADCx, uint32_t ADC_PowerDown, FunctionalState NewState); +void ADC_DelaySelectionConfig(ADC_TypeDef* ADCx, uint8_t ADC_DelayLength); + +/* Analog Watchdog configuration functions ************************************/ +void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog); +void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold,uint16_t LowThreshold); +void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel); + +/* Temperature Sensor & Vrefint (Voltage Reference internal) management function */ +void ADC_TempSensorVrefintCmd(FunctionalState NewState); + +/* Regular Channels Configuration functions ***********************************/ +void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime); +void ADC_SoftwareStartConv(ADC_TypeDef* ADCx); +FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx); +void ADC_EOCOnEachRegularChannelCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_ContinuousModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number); +void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx); + +/* Regular Channels DMA Configuration functions *******************************/ +void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_DMARequestAfterLastTransferCmd(ADC_TypeDef* ADCx, FunctionalState NewState); + +/* Injected channels Configuration functions **********************************/ +void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime); +void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length); +void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset); +void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv); +void ADC_ExternalTrigInjectedConvEdgeConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConvEdge); +void ADC_SoftwareStartInjectedConv(ADC_TypeDef* ADCx); +FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx); +void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); +uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel); + +/* Interrupts and flags management functions **********************************/ +void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState); +FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint16_t ADC_FLAG); +void ADC_ClearFlag(ADC_TypeDef* ADCx, uint16_t ADC_FLAG); +ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT); +void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32L1xx_ADC_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_aes.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_aes.h new file mode 100644 index 0000000..46dcc01 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_aes.h @@ -0,0 +1,236 @@ +/** + ****************************************************************************** + * @file stm32l1xx_aes.h + * @author MCD Application Team + * @version V1.1.1 + * @date 05-March-2012 + * @brief This file contains all the functions prototypes for the AES firmware + * library. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_AES_H +#define __STM32L1xx_AES_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup AES + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief AES Init structure definition + */ +typedef struct +{ + uint32_t AES_Operation; /*!< Specifies the AES mode of operation. + This parameter can be a value of @ref AES_possible_Operation_modes */ + uint32_t AES_Chaining; /*!< Specifies the AES Chaining modes: ECB, CBC or CTR. + This parameter can be a value of @ref AES_possible_chaining_modes */ + uint32_t AES_DataType; /*!< Specifies the AES data swapping: 32-bit, 16-bit, 8-bit or 1-bit. + This parameter can be a value of @ref AES_Data_Types */ +}AES_InitTypeDef; + +/** + * @brief AES Key(s) structure definition + */ +typedef struct +{ + uint32_t AES_Key0; /*!< Key[31:0] */ + uint32_t AES_Key1; /*!< Key[63:32] */ + uint32_t AES_Key2; /*!< Key[95:64] */ + uint32_t AES_Key3; /*!< Key[127:96] */ +}AES_KeyInitTypeDef; + +/** + * @brief AES Initialization Vectors (IV) structure definition + */ +typedef struct +{ + uint32_t AES_IV0; /*!< Init Vector IV[31:0] */ + uint32_t AES_IV1; /*!< Init Vector IV[63:32] */ + uint32_t AES_IV2; /*!< Init Vector IV[95:64] */ + uint32_t AES_IV3; /*!< Init Vector IV[127:96] */ +}AES_IVInitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup AES_Exported_Constants + * @{ + */ + +/** @defgroup AES_possible_Operation_modes + * @{ + */ +#define AES_Operation_Encryp ((uint32_t)0x00000000) /*!< AES in Encryption mode */ +#define AES_Operation_KeyDeriv AES_CR_MODE_0 /*!< AES in Key Derivation mode */ +#define AES_Operation_Decryp AES_CR_MODE_1 /*!< AES in Decryption mode */ +#define AES_Operation_KeyDerivAndDecryp AES_CR_MODE /*!< AES in Key Derivation and Decryption mode */ + +#define IS_AES_MODE(OPERATION) (((OPERATION) == AES_Operation_Encryp) || \ + ((OPERATION) == AES_Operation_KeyDeriv) || \ + ((OPERATION) == AES_Operation_Decryp) || \ + ((OPERATION) == AES_Operation_KeyDerivAndDecryp)) + +/** + * @} + */ + +/** @defgroup AES_possible_chaining_modes + * @{ + */ +#define AES_Chaining_ECB ((uint32_t)0x00000000) /*!< AES in ECB chaining mode */ +#define AES_Chaining_CBC AES_CR_CHMOD_0 /*!< AES in CBC chaining mode */ +#define AES_Chaining_CTR AES_CR_CHMOD_1 /*!< AES in CTR chaining mode */ + +#define IS_AES_CHAINING(CHAINING) (((CHAINING) == AES_Chaining_ECB) || \ + ((CHAINING) == AES_Chaining_CBC) || \ + ((CHAINING) == AES_Chaining_CTR)) +/** + * @} + */ + +/** @defgroup AES_Data_Types + * @{ + */ +#define AES_DataType_32b ((uint32_t)0x00000000) /*!< 32-bit data. No swapping */ +#define AES_DataType_16b AES_CR_DATATYPE_0 /*!< 16-bit data. Each half word is swapped */ +#define AES_DataType_8b AES_CR_DATATYPE_1 /*!< 8-bit data. All bytes are swapped */ +#define AES_DataType_1b AES_CR_DATATYPE /*!< 1-bit data. In the word all bits are swapped */ + +#define IS_AES_DATATYPE(DATATYPE) (((DATATYPE) == AES_DataType_32b) || \ + ((DATATYPE) == AES_DataType_16b)|| \ + ((DATATYPE) == AES_DataType_8b) || \ + ((DATATYPE) == AES_DataType_1b)) +/** + * @} + */ + +/** @defgroup AES_Flags + * @{ + */ +#define AES_FLAG_CCF AES_SR_CCF /*!< Computation Complete Flag */ +#define AES_FLAG_RDERR AES_SR_RDERR /*!< Read Error Flag */ +#define AES_FLAG_WRERR AES_SR_WRERR /*!< Write Error Flag */ + +#define IS_AES_FLAG(FLAG) (((FLAG) == AES_FLAG_CCF) || \ + ((FLAG) == AES_FLAG_RDERR) || \ + ((FLAG) == AES_FLAG_WRERR)) +/** + * @} + */ + +/** @defgroup AES_Interrupts + * @{ + */ +#define AES_IT_CC AES_CR_CCIE /*!< Computation Complete interrupt */ +#define AES_IT_ERR AES_CR_ERRIE /*!< Error interrupt */ + +#define IS_AES_IT(IT) ((((IT) & (uint32_t)0xFFFFF9FF) == 0x00) && ((IT) != 0x00)) +#define IS_AES_GET_IT(IT) (((IT) == AES_IT_CC) || ((IT) == AES_IT_ERR)) + +/** + * @} + */ + +/** @defgroup AES_DMA_Transfer_modes + * @{ + */ +#define AES_DMATransfer_In AES_CR_DMAINEN /*!< DMA requests enabled for input transfer phase */ +#define AES_DMATransfer_Out AES_CR_DMAOUTEN /*!< DMA requests enabled for input transfer phase */ +#define AES_DMATransfer_InOut (AES_CR_DMAINEN | AES_CR_DMAOUTEN) /*!< DMA requests enabled for both input and output phases */ + +#define IS_AES_DMA_TRANSFER(TRANSFER) (((TRANSFER) == AES_DMATransfer_In) || \ + ((TRANSFER) == AES_DMATransfer_Out) || \ + ((TRANSFER) == AES_DMATransfer_InOut)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/* Initialization and configuration functions *********************************/ +void AES_DeInit(void); +void AES_Init(AES_InitTypeDef* AES_InitStruct); +void AES_KeyInit(AES_KeyInitTypeDef* AES_KeyInitStruct); +void AES_IVInit(AES_IVInitTypeDef* AES_IVInitStruct); +void AES_Cmd(FunctionalState NewState); + +/* Structures initialization functions ****************************************/ +void AES_StructInit(AES_InitTypeDef* AES_InitStruct); +void AES_KeyStructInit(AES_KeyInitTypeDef* AES_KeyInitStruct); +void AES_IVStructInit(AES_IVInitTypeDef* AES_IVInitStruct); + +/* AES Read and Write functions **********************************************/ +void AES_WriteSubData(uint32_t Data); +uint32_t AES_ReadSubData(void); +void AES_ReadKey(AES_KeyInitTypeDef* AES_KeyInitStruct); +void AES_ReadIV(AES_IVInitTypeDef* AES_IVInitStruct); + +/* DMA transfers management function ******************************************/ +void AES_DMAConfig(uint32_t AES_DMATransfer, FunctionalState NewState); + +/* Interrupts and flags management functions **********************************/ +void AES_ITConfig(uint32_t AES_IT, FunctionalState NewState); +FlagStatus AES_GetFlagStatus(uint32_t AES_FLAG); +void AES_ClearFlag(uint32_t AES_FLAG); +ITStatus AES_GetITStatus(uint32_t AES_IT); +void AES_ClearITPendingBit(uint32_t AES_IT); + +/* High Level AES functions **************************************************/ +ErrorStatus AES_ECB_Encrypt(uint8_t* Key, uint8_t* Input, uint32_t Ilength, uint8_t* Output); +ErrorStatus AES_ECB_Decrypt(uint8_t* Key, uint8_t* Input, uint32_t Ilength, uint8_t* Output); +ErrorStatus AES_CBC_Encrypt(uint8_t* Key, uint8_t InitVectors[16], uint8_t* Input, uint32_t Ilength, uint8_t* Output); +ErrorStatus AES_CBC_Decrypt(uint8_t* Key, uint8_t InitVectors[16], uint8_t* Input, uint32_t Ilength, uint8_t* Output); +ErrorStatus AES_CTR_Encrypt(uint8_t* Key, uint8_t InitVectors[16], uint8_t* Input, uint32_t Ilength, uint8_t* Output); +ErrorStatus AES_CTR_Decrypt(uint8_t* Key, uint8_t InitVectors[16], uint8_t* Input, uint32_t Ilength, uint8_t* Output); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32L1xx_AES_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_comp.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_comp.h new file mode 100644 index 0000000..efec1ee --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_comp.h @@ -0,0 +1,187 @@ +/** + ****************************************************************************** + * @file stm32l1xx_comp.h + * @author MCD Application Team + * @version V1.1.1 + * @date 05-March-2012 + * @brief This file contains all the functions prototypes for the COMP firmware + * library. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_COMP_H +#define __STM32L1xx_COMP_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup COMP + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief COMP Init structure definition + */ + +typedef struct +{ + uint32_t COMP_Speed; /*!< Defines the speed of comparator 2. + This parameter can be a value of @ref COMP_Speed */ + uint32_t COMP_InvertingInput; /*!< Selects the inverting input of the comparator 2. + This parameter can be a value of @ref COMP_InvertingInput */ + uint32_t COMP_OutputSelect; /*!< Selects the output redirection of the comparator 2. + This parameter can be a value of @ref COMP_OutputSelect */ + +}COMP_InitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup COMP_Exported_Constants + * @{ + */ + +#define COMP_OutputLevel_High ((uint32_t)0x00000001) +#define COMP_OutputLevel_Low ((uint32_t)0x00000000) + +/** @defgroup COMP_Selection + * @{ + */ + +#define COMP_Selection_COMP1 ((uint32_t)0x00000001) +#define COMP_Selection_COMP2 ((uint32_t)0x00000002) + +#define IS_COMP_ALL_PERIPH(PERIPH) (((PERIPH) == COMP_Selection_COMP1) || \ + ((PERIPH) == COMP_Selection_COMP2)) + +/** + * @} + */ + +/** @defgroup COMP_InvertingInput + * @{ + */ + +#define COMP_InvertingInput_None ((uint32_t)0x00000000) /* COMP2 is disabled when this parameter is selected */ +#define COMP_InvertingInput_IO ((uint32_t)0x00040000) +#define COMP_InvertingInput_VREFINT ((uint32_t)0x00080000) +#define COMP_InvertingInput_3_4VREFINT ((uint32_t)0x000C0000) +#define COMP_InvertingInput_1_2VREFINT ((uint32_t)0x00100000) +#define COMP_InvertingInput_1_4VREFINT ((uint32_t)0x00140000) +#define COMP_InvertingInput_DAC1 ((uint32_t)0x00180000) +#define COMP_InvertingInput_DAC2 ((uint32_t)0x001C0000) + +#define IS_COMP_INVERTING_INPUT(INPUT) (((INPUT) == COMP_InvertingInput_None) || \ + ((INPUT) == COMP_InvertingInput_IO) || \ + ((INPUT) == COMP_InvertingInput_VREFINT) || \ + ((INPUT) == COMP_InvertingInput_3_4VREFINT) || \ + ((INPUT) == COMP_InvertingInput_1_2VREFINT) || \ + ((INPUT) == COMP_InvertingInput_1_4VREFINT) || \ + ((INPUT) == COMP_InvertingInput_DAC1) || \ + ((INPUT) == COMP_InvertingInput_DAC2)) +/** + * @} + */ + +/** @defgroup COMP_OutputSelect + * @{ + */ + +#define COMP_OutputSelect_TIM2IC4 ((uint32_t)0x00000000) +#define COMP_OutputSelect_TIM2OCREFCLR ((uint32_t)0x00200000) +#define COMP_OutputSelect_TIM3IC4 ((uint32_t)0x00400000) +#define COMP_OutputSelect_TIM3OCREFCLR ((uint32_t)0x00600000) +#define COMP_OutputSelect_TIM4IC4 ((uint32_t)0x00800000) +#define COMP_OutputSelect_TIM4OCREFCLR ((uint32_t)0x00A00000) +#define COMP_OutputSelect_TIM10IC1 ((uint32_t)0x00C00000) +#define COMP_OutputSelect_None ((uint32_t)0x00E00000) + +#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OutputSelect_TIM2IC4) || \ + ((OUTPUT) == COMP_OutputSelect_TIM2OCREFCLR) || \ + ((OUTPUT) == COMP_OutputSelect_TIM3IC4) || \ + ((OUTPUT) == COMP_OutputSelect_TIM3OCREFCLR) || \ + ((OUTPUT) == COMP_OutputSelect_TIM4IC4) || \ + ((OUTPUT) == COMP_OutputSelect_TIM4OCREFCLR) || \ + ((OUTPUT) == COMP_OutputSelect_TIM10IC1) || \ + ((OUTPUT) == COMP_OutputSelect_None)) +/** + * @} + */ + +/** @defgroup COMP_Speed + * @{ + */ + +#define COMP_Speed_Slow ((uint32_t)0x00000000) +#define COMP_Speed_Fast ((uint32_t)0x00001000) + +#define IS_COMP_SPEED(SPEED) (((SPEED) == COMP_Speed_Slow) || \ + ((SPEED) == COMP_Speed_Fast)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/* Function used to set the COMP configuration to the default reset state ****/ +void COMP_DeInit(void); + +/* Initialization and Configuration functions *********************************/ +void COMP_Init(COMP_InitTypeDef* COMP_InitStruct); +void COMP_Cmd(FunctionalState NewState); +uint8_t COMP_GetOutputLevel(uint32_t COMP_Selection); +void COMP_SW1SwitchConfig(FunctionalState NewState); + +/* Window mode control function ***********************************************/ +void COMP_WindowCmd(FunctionalState NewState); + +/* Internal Reference Voltage (VREFINT) output function ***********************/ +void COMP_VrefintOutputCmd(FunctionalState NewState); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32L1xx_COMP_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_dbgmcu.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_dbgmcu.h new file mode 100644 index 0000000..04d0c24 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_dbgmcu.h @@ -0,0 +1,105 @@ +/** + ****************************************************************************** + * @file stm32l1xx_dbgmcu.h + * @author MCD Application Team + * @version V1.1.1 + * @date 05-March-2012 + * @brief This file contains all the functions prototypes for the DBGMCU + * firmware library. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_DBGMCU_H +#define __STM32L1xx_DBGMCU_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup DBGMCU + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DBGMCU_Exported_Constants + * @{ + */ + +#define DBGMCU_SLEEP ((uint32_t)0x00000001) +#define DBGMCU_STOP ((uint32_t)0x00000002) +#define DBGMCU_STANDBY ((uint32_t)0x00000004) +#define IS_DBGMCU_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFFF8) == 0x00) && ((PERIPH) != 0x00)) + +#define DBGMCU_TIM2_STOP ((uint32_t)0x00000001) +#define DBGMCU_TIM3_STOP ((uint32_t)0x00000002) +#define DBGMCU_TIM4_STOP ((uint32_t)0x00000004) +#define DBGMCU_TIM5_STOP ((uint32_t)0x00000008) +#define DBGMCU_TIM6_STOP ((uint32_t)0x00000010) +#define DBGMCU_TIM7_STOP ((uint32_t)0x00000020) +#define DBGMCU_RTC_STOP ((uint32_t)0x00000400) +#define DBGMCU_WWDG_STOP ((uint32_t)0x00000800) +#define DBGMCU_IWDG_STOP ((uint32_t)0x00001000) +#define DBGMCU_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000) +#define DBGMCU_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00400000) +#define IS_DBGMCU_APB1PERIPH(PERIPH) ((((PERIPH) & 0xFF9FE3C0) == 0x00) && ((PERIPH) != 0x00)) + +#define DBGMCU_TIM9_STOP ((uint32_t)0x00000004) +#define DBGMCU_TIM10_STOP ((uint32_t)0x00000008) +#define DBGMCU_TIM11_STOP ((uint32_t)0x00000010) +#define IS_DBGMCU_APB2PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFFE3) == 0x00) && ((PERIPH) != 0x00)) + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +uint32_t DBGMCU_GetREVID(void); +uint32_t DBGMCU_GetDEVID(void); +void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState); +void DBGMCU_APB1PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState); +void DBGMCU_APB2PeriphConfig(uint32_t DBGMCU_Periph, FunctionalState NewState); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_DBGMCU_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_dma.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_dma.h new file mode 100644 index 0000000..8971e77 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_dma.h @@ -0,0 +1,435 @@ +/** + ****************************************************************************** + * @file stm32l1xx_dma.h + * @author MCD Application Team + * @version V1.1.1 + * @date 05-March-2012 + * @brief This file contains all the functions prototypes for the DMA firmware + * library. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_DMA_H +#define __STM32L1xx_DMA_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup DMA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief DMA Init structure definition + */ + +typedef struct +{ + uint32_t DMA_PeripheralBaseAddr; /*!< Specifies the peripheral base address for DMAy Channelx. */ + + uint32_t DMA_MemoryBaseAddr; /*!< Specifies the memory base address for DMAy Channelx. */ + + uint32_t DMA_DIR; /*!< Specifies if the peripheral is the source or destination. + This parameter can be a value of @ref DMA_data_transfer_direction */ + + uint32_t DMA_BufferSize; /*!< Specifies the buffer size, in data unit, of the specified Channel. + The data unit is equal to the configuration set in DMA_PeripheralDataSize + or DMA_MemoryDataSize members depending in the transfer direction. */ + + uint32_t DMA_PeripheralInc; /*!< Specifies whether the Peripheral address register is incremented or not. + This parameter can be a value of @ref DMA_peripheral_incremented_mode */ + + uint32_t DMA_MemoryInc; /*!< Specifies whether the memory address register is incremented or not. + This parameter can be a value of @ref DMA_memory_incremented_mode */ + + uint32_t DMA_PeripheralDataSize; /*!< Specifies the Peripheral data width. + This parameter can be a value of @ref DMA_peripheral_data_size */ + + uint32_t DMA_MemoryDataSize; /*!< Specifies the Memory data width. + This parameter can be a value of @ref DMA_memory_data_size */ + + uint32_t DMA_Mode; /*!< Specifies the operation mode of the DMAy Channelx. + This parameter can be a value of @ref DMA_circular_normal_mode + @note: The circular buffer mode cannot be used if the memory-to-memory + data transfer is configured on the selected Channel */ + + uint32_t DMA_Priority; /*!< Specifies the software priority for the DMAy Channelx. + This parameter can be a value of @ref DMA_priority_level */ + + uint32_t DMA_M2M; /*!< Specifies if the DMAy Channelx will be used in memory-to-memory transfer. + This parameter can be a value of @ref DMA_memory_to_memory */ +}DMA_InitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup DMA_Exported_Constants + * @{ + */ + +#define IS_DMA_ALL_PERIPH(PERIPH) (((PERIPH) == DMA1_Channel1) || \ + ((PERIPH) == DMA1_Channel2) || \ + ((PERIPH) == DMA1_Channel3) || \ + ((PERIPH) == DMA1_Channel4) || \ + ((PERIPH) == DMA1_Channel5) || \ + ((PERIPH) == DMA1_Channel6) || \ + ((PERIPH) == DMA1_Channel7) || \ + ((PERIPH) == DMA2_Channel1) || \ + ((PERIPH) == DMA2_Channel2) || \ + ((PERIPH) == DMA2_Channel3) || \ + ((PERIPH) == DMA2_Channel4) || \ + ((PERIPH) == DMA2_Channel5)) + +/** @defgroup DMA_data_transfer_direction + * @{ + */ + +#define DMA_DIR_PeripheralDST ((uint32_t)0x00000010) +#define DMA_DIR_PeripheralSRC ((uint32_t)0x00000000) +#define IS_DMA_DIR(DIR) (((DIR) == DMA_DIR_PeripheralDST) || \ + ((DIR) == DMA_DIR_PeripheralSRC)) +/** + * @} + */ + +/** @defgroup DMA_peripheral_incremented_mode + * @{ + */ + +#define DMA_PeripheralInc_Enable ((uint32_t)0x00000040) +#define DMA_PeripheralInc_Disable ((uint32_t)0x00000000) +#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PeripheralInc_Enable) || \ + ((STATE) == DMA_PeripheralInc_Disable)) +/** + * @} + */ + +/** @defgroup DMA_memory_incremented_mode + * @{ + */ + +#define DMA_MemoryInc_Enable ((uint32_t)0x00000080) +#define DMA_MemoryInc_Disable ((uint32_t)0x00000000) +#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MemoryInc_Enable) || \ + ((STATE) == DMA_MemoryInc_Disable)) +/** + * @} + */ + +/** @defgroup DMA_peripheral_data_size + * @{ + */ + +#define DMA_PeripheralDataSize_Byte ((uint32_t)0x00000000) +#define DMA_PeripheralDataSize_HalfWord ((uint32_t)0x00000100) +#define DMA_PeripheralDataSize_Word ((uint32_t)0x00000200) +#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PeripheralDataSize_Byte) || \ + ((SIZE) == DMA_PeripheralDataSize_HalfWord) || \ + ((SIZE) == DMA_PeripheralDataSize_Word)) +/** + * @} + */ + +/** @defgroup DMA_memory_data_size + * @{ + */ + +#define DMA_MemoryDataSize_Byte ((uint32_t)0x00000000) +#define DMA_MemoryDataSize_HalfWord ((uint32_t)0x00000400) +#define DMA_MemoryDataSize_Word ((uint32_t)0x00000800) +#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MemoryDataSize_Byte) || \ + ((SIZE) == DMA_MemoryDataSize_HalfWord) || \ + ((SIZE) == DMA_MemoryDataSize_Word)) +/** + * @} + */ + +/** @defgroup DMA_circular_normal_mode + * @{ + */ + +#define DMA_Mode_Circular ((uint32_t)0x00000020) +#define DMA_Mode_Normal ((uint32_t)0x00000000) +#define IS_DMA_MODE(MODE) (((MODE) == DMA_Mode_Circular) || ((MODE) == DMA_Mode_Normal)) +/** + * @} + */ + +/** @defgroup DMA_priority_level + * @{ + */ + +#define DMA_Priority_VeryHigh ((uint32_t)0x00003000) +#define DMA_Priority_High ((uint32_t)0x00002000) +#define DMA_Priority_Medium ((uint32_t)0x00001000) +#define DMA_Priority_Low ((uint32_t)0x00000000) +#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_Priority_VeryHigh) || \ + ((PRIORITY) == DMA_Priority_High) || \ + ((PRIORITY) == DMA_Priority_Medium) || \ + ((PRIORITY) == DMA_Priority_Low)) +/** + * @} + */ + +/** @defgroup DMA_memory_to_memory + * @{ + */ + +#define DMA_M2M_Enable ((uint32_t)0x00004000) +#define DMA_M2M_Disable ((uint32_t)0x00000000) +#define IS_DMA_M2M_STATE(STATE) (((STATE) == DMA_M2M_Enable) || ((STATE) == DMA_M2M_Disable)) + +/** + * @} + */ + +/** @defgroup DMA_interrupts_definition + * @{ + */ + +#define DMA_IT_TC ((uint32_t)0x00000002) +#define DMA_IT_HT ((uint32_t)0x00000004) +#define DMA_IT_TE ((uint32_t)0x00000008) +#define IS_DMA_CONFIG_IT(IT) ((((IT) & 0xFFFFFFF1) == 0x00) && ((IT) != 0x00)) + +#define DMA1_IT_GL1 ((uint32_t)0x00000001) +#define DMA1_IT_TC1 ((uint32_t)0x00000002) +#define DMA1_IT_HT1 ((uint32_t)0x00000004) +#define DMA1_IT_TE1 ((uint32_t)0x00000008) +#define DMA1_IT_GL2 ((uint32_t)0x00000010) +#define DMA1_IT_TC2 ((uint32_t)0x00000020) +#define DMA1_IT_HT2 ((uint32_t)0x00000040) +#define DMA1_IT_TE2 ((uint32_t)0x00000080) +#define DMA1_IT_GL3 ((uint32_t)0x00000100) +#define DMA1_IT_TC3 ((uint32_t)0x00000200) +#define DMA1_IT_HT3 ((uint32_t)0x00000400) +#define DMA1_IT_TE3 ((uint32_t)0x00000800) +#define DMA1_IT_GL4 ((uint32_t)0x00001000) +#define DMA1_IT_TC4 ((uint32_t)0x00002000) +#define DMA1_IT_HT4 ((uint32_t)0x00004000) +#define DMA1_IT_TE4 ((uint32_t)0x00008000) +#define DMA1_IT_GL5 ((uint32_t)0x00010000) +#define DMA1_IT_TC5 ((uint32_t)0x00020000) +#define DMA1_IT_HT5 ((uint32_t)0x00040000) +#define DMA1_IT_TE5 ((uint32_t)0x00080000) +#define DMA1_IT_GL6 ((uint32_t)0x00100000) +#define DMA1_IT_TC6 ((uint32_t)0x00200000) +#define DMA1_IT_HT6 ((uint32_t)0x00400000) +#define DMA1_IT_TE6 ((uint32_t)0x00800000) +#define DMA1_IT_GL7 ((uint32_t)0x01000000) +#define DMA1_IT_TC7 ((uint32_t)0x02000000) +#define DMA1_IT_HT7 ((uint32_t)0x04000000) +#define DMA1_IT_TE7 ((uint32_t)0x08000000) + +#define DMA2_IT_GL1 ((uint32_t)0x10000001) +#define DMA2_IT_TC1 ((uint32_t)0x10000002) +#define DMA2_IT_HT1 ((uint32_t)0x10000004) +#define DMA2_IT_TE1 ((uint32_t)0x10000008) +#define DMA2_IT_GL2 ((uint32_t)0x10000010) +#define DMA2_IT_TC2 ((uint32_t)0x10000020) +#define DMA2_IT_HT2 ((uint32_t)0x10000040) +#define DMA2_IT_TE2 ((uint32_t)0x10000080) +#define DMA2_IT_GL3 ((uint32_t)0x10000100) +#define DMA2_IT_TC3 ((uint32_t)0x10000200) +#define DMA2_IT_HT3 ((uint32_t)0x10000400) +#define DMA2_IT_TE3 ((uint32_t)0x10000800) +#define DMA2_IT_GL4 ((uint32_t)0x10001000) +#define DMA2_IT_TC4 ((uint32_t)0x10002000) +#define DMA2_IT_HT4 ((uint32_t)0x10004000) +#define DMA2_IT_TE4 ((uint32_t)0x10008000) +#define DMA2_IT_GL5 ((uint32_t)0x10010000) +#define DMA2_IT_TC5 ((uint32_t)0x10020000) +#define DMA2_IT_HT5 ((uint32_t)0x10040000) +#define DMA2_IT_TE5 ((uint32_t)0x10080000) + +#define IS_DMA_CLEAR_IT(IT) (((((IT) & 0xF0000000) == 0x00) || (((IT) & 0xEFF00000) == 0x00)) && ((IT) != 0x00)) + +#define IS_DMA_GET_IT(IT) (((IT) == DMA1_IT_GL1) || ((IT) == DMA1_IT_TC1) || \ + ((IT) == DMA1_IT_HT1) || ((IT) == DMA1_IT_TE1) || \ + ((IT) == DMA1_IT_GL2) || ((IT) == DMA1_IT_TC2) || \ + ((IT) == DMA1_IT_HT2) || ((IT) == DMA1_IT_TE2) || \ + ((IT) == DMA1_IT_GL3) || ((IT) == DMA1_IT_TC3) || \ + ((IT) == DMA1_IT_HT3) || ((IT) == DMA1_IT_TE3) || \ + ((IT) == DMA1_IT_GL4) || ((IT) == DMA1_IT_TC4) || \ + ((IT) == DMA1_IT_HT4) || ((IT) == DMA1_IT_TE4) || \ + ((IT) == DMA1_IT_GL5) || ((IT) == DMA1_IT_TC5) || \ + ((IT) == DMA1_IT_HT5) || ((IT) == DMA1_IT_TE5) || \ + ((IT) == DMA1_IT_GL6) || ((IT) == DMA1_IT_TC6) || \ + ((IT) == DMA1_IT_HT6) || ((IT) == DMA1_IT_TE6) || \ + ((IT) == DMA1_IT_GL7) || ((IT) == DMA1_IT_TC7) || \ + ((IT) == DMA1_IT_HT7) || ((IT) == DMA1_IT_TE7) || \ + ((IT) == DMA2_IT_GL1) || ((IT) == DMA2_IT_TC1) || \ + ((IT) == DMA2_IT_HT1) || ((IT) == DMA2_IT_TE1) || \ + ((IT) == DMA2_IT_GL2) || ((IT) == DMA2_IT_TC2) || \ + ((IT) == DMA2_IT_HT2) || ((IT) == DMA2_IT_TE2) || \ + ((IT) == DMA2_IT_GL3) || ((IT) == DMA2_IT_TC3) || \ + ((IT) == DMA2_IT_HT3) || ((IT) == DMA2_IT_TE3) || \ + ((IT) == DMA2_IT_GL4) || ((IT) == DMA2_IT_TC4) || \ + ((IT) == DMA2_IT_HT4) || ((IT) == DMA2_IT_TE4) || \ + ((IT) == DMA2_IT_GL5) || ((IT) == DMA2_IT_TC5) || \ + ((IT) == DMA2_IT_HT5) || ((IT) == DMA2_IT_TE5)) +/** + * @} + */ + +/** @defgroup DMA_flags_definition + * @{ + */ +#define DMA1_FLAG_GL1 ((uint32_t)0x00000001) +#define DMA1_FLAG_TC1 ((uint32_t)0x00000002) +#define DMA1_FLAG_HT1 ((uint32_t)0x00000004) +#define DMA1_FLAG_TE1 ((uint32_t)0x00000008) +#define DMA1_FLAG_GL2 ((uint32_t)0x00000010) +#define DMA1_FLAG_TC2 ((uint32_t)0x00000020) +#define DMA1_FLAG_HT2 ((uint32_t)0x00000040) +#define DMA1_FLAG_TE2 ((uint32_t)0x00000080) +#define DMA1_FLAG_GL3 ((uint32_t)0x00000100) +#define DMA1_FLAG_TC3 ((uint32_t)0x00000200) +#define DMA1_FLAG_HT3 ((uint32_t)0x00000400) +#define DMA1_FLAG_TE3 ((uint32_t)0x00000800) +#define DMA1_FLAG_GL4 ((uint32_t)0x00001000) +#define DMA1_FLAG_TC4 ((uint32_t)0x00002000) +#define DMA1_FLAG_HT4 ((uint32_t)0x00004000) +#define DMA1_FLAG_TE4 ((uint32_t)0x00008000) +#define DMA1_FLAG_GL5 ((uint32_t)0x00010000) +#define DMA1_FLAG_TC5 ((uint32_t)0x00020000) +#define DMA1_FLAG_HT5 ((uint32_t)0x00040000) +#define DMA1_FLAG_TE5 ((uint32_t)0x00080000) +#define DMA1_FLAG_GL6 ((uint32_t)0x00100000) +#define DMA1_FLAG_TC6 ((uint32_t)0x00200000) +#define DMA1_FLAG_HT6 ((uint32_t)0x00400000) +#define DMA1_FLAG_TE6 ((uint32_t)0x00800000) +#define DMA1_FLAG_GL7 ((uint32_t)0x01000000) +#define DMA1_FLAG_TC7 ((uint32_t)0x02000000) +#define DMA1_FLAG_HT7 ((uint32_t)0x04000000) +#define DMA1_FLAG_TE7 ((uint32_t)0x08000000) + +#define DMA2_FLAG_GL1 ((uint32_t)0x10000001) +#define DMA2_FLAG_TC1 ((uint32_t)0x10000002) +#define DMA2_FLAG_HT1 ((uint32_t)0x10000004) +#define DMA2_FLAG_TE1 ((uint32_t)0x10000008) +#define DMA2_FLAG_GL2 ((uint32_t)0x10000010) +#define DMA2_FLAG_TC2 ((uint32_t)0x10000020) +#define DMA2_FLAG_HT2 ((uint32_t)0x10000040) +#define DMA2_FLAG_TE2 ((uint32_t)0x10000080) +#define DMA2_FLAG_GL3 ((uint32_t)0x10000100) +#define DMA2_FLAG_TC3 ((uint32_t)0x10000200) +#define DMA2_FLAG_HT3 ((uint32_t)0x10000400) +#define DMA2_FLAG_TE3 ((uint32_t)0x10000800) +#define DMA2_FLAG_GL4 ((uint32_t)0x10001000) +#define DMA2_FLAG_TC4 ((uint32_t)0x10002000) +#define DMA2_FLAG_HT4 ((uint32_t)0x10004000) +#define DMA2_FLAG_TE4 ((uint32_t)0x10008000) +#define DMA2_FLAG_GL5 ((uint32_t)0x10010000) +#define DMA2_FLAG_TC5 ((uint32_t)0x10020000) +#define DMA2_FLAG_HT5 ((uint32_t)0x10040000) +#define DMA2_FLAG_TE5 ((uint32_t)0x10080000) + +#define IS_DMA_CLEAR_FLAG(FLAG) (((((FLAG) & 0xF0000000) == 0x00) || (((FLAG) & 0xEFF00000) == 0x00)) && ((FLAG) != 0x00)) + +#define IS_DMA_GET_FLAG(FLAG) (((FLAG) == DMA1_FLAG_GL1) || ((FLAG) == DMA1_FLAG_TC1) || \ + ((FLAG) == DMA1_FLAG_HT1) || ((FLAG) == DMA1_FLAG_TE1) || \ + ((FLAG) == DMA1_FLAG_GL2) || ((FLAG) == DMA1_FLAG_TC2) || \ + ((FLAG) == DMA1_FLAG_HT2) || ((FLAG) == DMA1_FLAG_TE2) || \ + ((FLAG) == DMA1_FLAG_GL3) || ((FLAG) == DMA1_FLAG_TC3) || \ + ((FLAG) == DMA1_FLAG_HT3) || ((FLAG) == DMA1_FLAG_TE3) || \ + ((FLAG) == DMA1_FLAG_GL4) || ((FLAG) == DMA1_FLAG_TC4) || \ + ((FLAG) == DMA1_FLAG_HT4) || ((FLAG) == DMA1_FLAG_TE4) || \ + ((FLAG) == DMA1_FLAG_GL5) || ((FLAG) == DMA1_FLAG_TC5) || \ + ((FLAG) == DMA1_FLAG_HT5) || ((FLAG) == DMA1_FLAG_TE5) || \ + ((FLAG) == DMA1_FLAG_GL6) || ((FLAG) == DMA1_FLAG_TC6) || \ + ((FLAG) == DMA1_FLAG_HT6) || ((FLAG) == DMA1_FLAG_TE6) || \ + ((FLAG) == DMA1_FLAG_GL7) || ((FLAG) == DMA1_FLAG_TC7) || \ + ((FLAG) == DMA1_FLAG_HT7) || ((FLAG) == DMA1_FLAG_TE7) || \ + ((FLAG) == DMA2_FLAG_GL1) || ((FLAG) == DMA2_FLAG_TC1) || \ + ((FLAG) == DMA2_FLAG_HT1) || ((FLAG) == DMA2_FLAG_TE1) || \ + ((FLAG) == DMA2_FLAG_GL2) || ((FLAG) == DMA2_FLAG_TC2) || \ + ((FLAG) == DMA2_FLAG_HT2) || ((FLAG) == DMA2_FLAG_TE2) || \ + ((FLAG) == DMA2_FLAG_GL3) || ((FLAG) == DMA2_FLAG_TC3) || \ + ((FLAG) == DMA2_FLAG_HT3) || ((FLAG) == DMA2_FLAG_TE3) || \ + ((FLAG) == DMA2_FLAG_GL4) || ((FLAG) == DMA2_FLAG_TC4) || \ + ((FLAG) == DMA2_FLAG_HT4) || ((FLAG) == DMA2_FLAG_TE4) || \ + ((FLAG) == DMA2_FLAG_GL5) || ((FLAG) == DMA2_FLAG_TC5) || \ + ((FLAG) == DMA2_FLAG_HT5) || ((FLAG) == DMA2_FLAG_TE5)) +/** + * @} + */ + +/** @defgroup DMA_Buffer_Size + * @{ + */ + +#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/* Function used to set the DMA configuration to the default reset state *****/ +void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx); + +/* Initialization and Configuration functions *********************************/ +void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct); +void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct); +void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState); + +/* Data Counter functions *****************************************************/ +void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber); +uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx); + +/* Interrupts and flags management functions **********************************/ +void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState); +FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG); +void DMA_ClearFlag(uint32_t DMAy_FLAG); +ITStatus DMA_GetITStatus(uint32_t DMAy_IT); +void DMA_ClearITPendingBit(uint32_t DMAy_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32L1xx_DMA_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_exti.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_exti.h new file mode 100644 index 0000000..cb16d9f --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_exti.h @@ -0,0 +1,199 @@ +/** + ****************************************************************************** + * @file stm32l1xx_exti.h + * @author MCD Application Team + * @version V1.1.1 + * @date 05-March-2012 + * @brief This file contains all the functions prototypes for the EXTI firmware + * library. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_EXTI_H +#define __STM32L1xx_EXTI_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup EXTI + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief EXTI mode enumeration + */ + +typedef enum +{ + EXTI_Mode_Interrupt = 0x00, + EXTI_Mode_Event = 0x04 +}EXTIMode_TypeDef; + +#define IS_EXTI_MODE(MODE) (((MODE) == EXTI_Mode_Interrupt) || ((MODE) == EXTI_Mode_Event)) + +/** + * @brief EXTI Trigger enumeration + */ + +typedef enum +{ + EXTI_Trigger_Rising = 0x08, + EXTI_Trigger_Falling = 0x0C, + EXTI_Trigger_Rising_Falling = 0x10 +}EXTITrigger_TypeDef; + +#define IS_EXTI_TRIGGER(TRIGGER) (((TRIGGER) == EXTI_Trigger_Rising) || \ + ((TRIGGER) == EXTI_Trigger_Falling) || \ + ((TRIGGER) == EXTI_Trigger_Rising_Falling)) +/** + * @brief EXTI Init Structure definition + */ + +typedef struct +{ + uint32_t EXTI_Line; /*!< Specifies the EXTI lines to be enabled or disabled. + This parameter can be any combination of @ref EXTI_Lines */ + + EXTIMode_TypeDef EXTI_Mode; /*!< Specifies the mode for the EXTI lines. + This parameter can be a value of @ref EXTIMode_TypeDef */ + + EXTITrigger_TypeDef EXTI_Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines. + This parameter can be a value of @ref EXTITrigger_TypeDef */ + + FunctionalState EXTI_LineCmd; /*!< Specifies the new state of the selected EXTI lines. + This parameter can be set either to ENABLE or DISABLE */ +}EXTI_InitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup EXTI_Exported_Constants + * @{ + */ + +/** @defgroup EXTI_Lines + * @{ + */ + +#define EXTI_Line0 ((uint32_t)0x00000001) /*!< External interrupt line 0 */ +#define EXTI_Line1 ((uint32_t)0x00000002) /*!< External interrupt line 1 */ +#define EXTI_Line2 ((uint32_t)0x00000004) /*!< External interrupt line 2 */ +#define EXTI_Line3 ((uint32_t)0x00000008) /*!< External interrupt line 3 */ +#define EXTI_Line4 ((uint32_t)0x00000010) /*!< External interrupt line 4 */ +#define EXTI_Line5 ((uint32_t)0x00000020) /*!< External interrupt line 5 */ +#define EXTI_Line6 ((uint32_t)0x00000040) /*!< External interrupt line 6 */ +#define EXTI_Line7 ((uint32_t)0x00000080) /*!< External interrupt line 7 */ +#define EXTI_Line8 ((uint32_t)0x00000100) /*!< External interrupt line 8 */ +#define EXTI_Line9 ((uint32_t)0x00000200) /*!< External interrupt line 9 */ +#define EXTI_Line10 ((uint32_t)0x00000400) /*!< External interrupt line 10 */ +#define EXTI_Line11 ((uint32_t)0x00000800) /*!< External interrupt line 11 */ +#define EXTI_Line12 ((uint32_t)0x00001000) /*!< External interrupt line 12 */ +#define EXTI_Line13 ((uint32_t)0x00002000) /*!< External interrupt line 13 */ +#define EXTI_Line14 ((uint32_t)0x00004000) /*!< External interrupt line 14 */ +#define EXTI_Line15 ((uint32_t)0x00008000) /*!< External interrupt line 15 */ +#define EXTI_Line16 ((uint32_t)0x00010000) /*!< External interrupt line 16 + Connected to the PVD Output */ +#define EXTI_Line17 ((uint32_t)0x00020000) /*!< External interrupt line 17 + Connected to the RTC Alarm + event */ +#define EXTI_Line18 ((uint32_t)0x00040000) /*!< External interrupt line 18 + Connected to the USB Device + FS Wakeup from suspend event */ +#define EXTI_Line19 ((uint32_t)0x00080000) /*!< External interrupt line 19 + Connected to the RTC Tamper + and Time Stamp events */ +#define EXTI_Line20 ((uint32_t)0x00100000) /*!< External interrupt line 20 + Connected to the RTC Wakeup + event */ +#define EXTI_Line21 ((uint32_t)0x00200000) /*!< External interrupt line 21 + Connected to the Comparator 1 + event */ + +#define EXTI_Line22 ((uint32_t)0x00400000) /*!< External interrupt line 22 + Connected to the Comparator 2 + event */ + +#define EXTI_Line23 ((uint32_t)0x00800000) /*!< External interrupt line 23 + Comparator channel acquisition event */ + +#define IS_EXTI_LINE(LINE) ((((LINE) & (uint32_t)0xFF000000) == 0x00) && ((LINE) != (uint16_t)0x00)) + +#define IS_GET_EXTI_LINE(LINE) (((LINE) == EXTI_Line0) || ((LINE) == EXTI_Line1) || \ + ((LINE) == EXTI_Line2) || ((LINE) == EXTI_Line3) || \ + ((LINE) == EXTI_Line4) || ((LINE) == EXTI_Line5) || \ + ((LINE) == EXTI_Line6) || ((LINE) == EXTI_Line7) || \ + ((LINE) == EXTI_Line8) || ((LINE) == EXTI_Line9) || \ + ((LINE) == EXTI_Line10) || ((LINE) == EXTI_Line11) || \ + ((LINE) == EXTI_Line12) || ((LINE) == EXTI_Line13) || \ + ((LINE) == EXTI_Line14) || ((LINE) == EXTI_Line15) || \ + ((LINE) == EXTI_Line16) || ((LINE) == EXTI_Line17) || \ + ((LINE) == EXTI_Line18) || ((LINE) == EXTI_Line19) || \ + ((LINE) == EXTI_Line20) || ((LINE) == EXTI_Line21) || \ + ((LINE) == EXTI_Line22) || ((LINE) == EXTI_Line23)) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ +/* Function used to set the EXTI configuration to the default reset state *****/ +void EXTI_DeInit(void); + +/* Initialization and Configuration functions *********************************/ +void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct); +void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct); +void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line); + +/* Interrupts and flags management functions **********************************/ +FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line); +void EXTI_ClearFlag(uint32_t EXTI_Line); +ITStatus EXTI_GetITStatus(uint32_t EXTI_Line); +void EXTI_ClearITPendingBit(uint32_t EXTI_Line); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_EXTI_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_flash.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_flash.h new file mode 100644 index 0000000..202ffc2 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_flash.h @@ -0,0 +1,464 @@ +/** + ****************************************************************************** + * @file stm32l1xx_flash.h + * @author MCD Application Team + * @version V1.1.1 + * @date 05-March-2012 + * @brief This file contains all the functions prototypes for the FLASH + * firmware library. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_FLASH_H +#define __STM32L1xx_FLASH_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup FLASH + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief FLASH Status + */ +typedef enum +{ + FLASH_BUSY = 1, + FLASH_ERROR_WRP, + FLASH_ERROR_PROGRAM, + FLASH_COMPLETE, + FLASH_TIMEOUT +}FLASH_Status; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup FLASH_Exported_Constants + * @{ + */ + +/** @defgroup FLASH_Latency + * @{ + */ +#define FLASH_Latency_0 ((uint8_t)0x00) /*!< FLASH Zero Latency cycle */ +#define FLASH_Latency_1 ((uint8_t)0x01) /*!< FLASH One Latency cycle */ + +#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_Latency_0) || \ + ((LATENCY) == FLASH_Latency_1)) +/** + * @} + */ + +/** @defgroup FLASH_Interrupts + * @{ + */ + +#define FLASH_IT_EOP FLASH_PECR_EOPIE /*!< End of programming interrupt source */ +#define FLASH_IT_ERR FLASH_PECR_ERRIE /*!< Error interrupt source */ +#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0xFFFCFFFF) == 0x00000000) && (((IT) != 0x00000000))) +/** + * @} + */ + +/** @defgroup FLASH_Address + * @{ + */ + +#define IS_FLASH_DATA_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08080000) && ((ADDRESS) <= 0x08082FFF)) +#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x0805FFFF)) + +/** + * @} + */ + +/** @defgroup Option_Bytes_Write_Protection + * @{ + */ + +#define OB_WRP_Pages0to15 ((uint32_t)0x00000001) /* Write protection of Sector0 */ +#define OB_WRP_Pages16to31 ((uint32_t)0x00000002) /* Write protection of Sector1 */ +#define OB_WRP_Pages32to47 ((uint32_t)0x00000004) /* Write protection of Sector2 */ +#define OB_WRP_Pages48to63 ((uint32_t)0x00000008) /* Write protection of Sector3 */ +#define OB_WRP_Pages64to79 ((uint32_t)0x00000010) /* Write protection of Sector4 */ +#define OB_WRP_Pages80to95 ((uint32_t)0x00000020) /* Write protection of Sector5 */ +#define OB_WRP_Pages96to111 ((uint32_t)0x00000040) /* Write protection of Sector6 */ +#define OB_WRP_Pages112to127 ((uint32_t)0x00000080) /* Write protection of Sector7 */ +#define OB_WRP_Pages128to143 ((uint32_t)0x00000100) /* Write protection of Sector8 */ +#define OB_WRP_Pages144to159 ((uint32_t)0x00000200) /* Write protection of Sector9 */ +#define OB_WRP_Pages160to175 ((uint32_t)0x00000400) /* Write protection of Sector10 */ +#define OB_WRP_Pages176to191 ((uint32_t)0x00000800) /* Write protection of Sector11 */ +#define OB_WRP_Pages192to207 ((uint32_t)0x00001000) /* Write protection of Sector12 */ +#define OB_WRP_Pages208to223 ((uint32_t)0x00002000) /* Write protection of Sector13 */ +#define OB_WRP_Pages224to239 ((uint32_t)0x00004000) /* Write protection of Sector14 */ +#define OB_WRP_Pages240to255 ((uint32_t)0x00008000) /* Write protection of Sector15 */ +#define OB_WRP_Pages256to271 ((uint32_t)0x00010000) /* Write protection of Sector16 */ +#define OB_WRP_Pages272to287 ((uint32_t)0x00020000) /* Write protection of Sector17 */ +#define OB_WRP_Pages288to303 ((uint32_t)0x00040000) /* Write protection of Sector18 */ +#define OB_WRP_Pages304to319 ((uint32_t)0x00080000) /* Write protection of Sector19 */ +#define OB_WRP_Pages320to335 ((uint32_t)0x00100000) /* Write protection of Sector20 */ +#define OB_WRP_Pages336to351 ((uint32_t)0x00200000) /* Write protection of Sector21 */ +#define OB_WRP_Pages352to367 ((uint32_t)0x00400000) /* Write protection of Sector22 */ +#define OB_WRP_Pages368to383 ((uint32_t)0x00800000) /* Write protection of Sector23 */ +#define OB_WRP_Pages384to399 ((uint32_t)0x01000000) /* Write protection of Sector24 */ +#define OB_WRP_Pages400to415 ((uint32_t)0x02000000) /* Write protection of Sector25 */ +#define OB_WRP_Pages416to431 ((uint32_t)0x04000000) /* Write protection of Sector26 */ +#define OB_WRP_Pages432to447 ((uint32_t)0x08000000) /* Write protection of Sector27 */ +#define OB_WRP_Pages448to463 ((uint32_t)0x10000000) /* Write protection of Sector28 */ +#define OB_WRP_Pages464to479 ((uint32_t)0x20000000) /* Write protection of Sector29 */ +#define OB_WRP_Pages480to495 ((uint32_t)0x40000000) /* Write protection of Sector30 */ +#define OB_WRP_Pages496to511 ((uint32_t)0x80000000) /* Write protection of Sector31 */ + +#define OB_WRP_AllPages ((uint32_t)0xFFFFFFFF) /*!< Write protection of all Sectors */ + +#define OB_WRP1_Pages512to527 ((uint32_t)0x00000001) /* Write protection of Sector32 */ +#define OB_WRP1_Pages528to543 ((uint32_t)0x00000002) /* Write protection of Sector33 */ +#define OB_WRP1_Pages544to559 ((uint32_t)0x00000004) /* Write protection of Sector34 */ +#define OB_WRP1_Pages560to575 ((uint32_t)0x00000008) /* Write protection of Sector35 */ +#define OB_WRP1_Pages576to591 ((uint32_t)0x00000010) /* Write protection of Sector36 */ +#define OB_WRP1_Pages592to607 ((uint32_t)0x00000020) /* Write protection of Sector37 */ +#define OB_WRP1_Pages608to623 ((uint32_t)0x00000040) /* Write protection of Sector38 */ +#define OB_WRP1_Pages624to639 ((uint32_t)0x00000080) /* Write protection of Sector39 */ +#define OB_WRP1_Pages640to655 ((uint32_t)0x00000100) /* Write protection of Sector40 */ +#define OB_WRP1_Pages656to671 ((uint32_t)0x00000200) /* Write protection of Sector41 */ +#define OB_WRP1_Pages672to687 ((uint32_t)0x00000400) /* Write protection of Sector42 */ +#define OB_WRP1_Pages688to703 ((uint32_t)0x00000800) /* Write protection of Sector43 */ +#define OB_WRP1_Pages704to719 ((uint32_t)0x00001000) /* Write protection of Sector44 */ +#define OB_WRP1_Pages720to735 ((uint32_t)0x00002000) /* Write protection of Sector45 */ +#define OB_WRP1_Pages736to751 ((uint32_t)0x00004000) /* Write protection of Sector46 */ +#define OB_WRP1_Pages752to767 ((uint32_t)0x00008000) /* Write protection of Sector47 */ +#define OB_WRP1_Pages768to783 ((uint32_t)0x00010000) /* Write protection of Sector48 */ +#define OB_WRP1_Pages784to799 ((uint32_t)0x00020000) /* Write protection of Sector49 */ +#define OB_WRP1_Pages800to815 ((uint32_t)0x00040000) /* Write protection of Sector50 */ +#define OB_WRP1_Pages816to831 ((uint32_t)0x00080000) /* Write protection of Sector51 */ +#define OB_WRP1_Pages832to847 ((uint32_t)0x00100000) /* Write protection of Sector52 */ +#define OB_WRP1_Pages848to863 ((uint32_t)0x00200000) /* Write protection of Sector53 */ +#define OB_WRP1_Pages864to879 ((uint32_t)0x00400000) /* Write protection of Sector54 */ +#define OB_WRP1_Pages880to895 ((uint32_t)0x00800000) /* Write protection of Sector55 */ +#define OB_WRP1_Pages896to911 ((uint32_t)0x01000000) /* Write protection of Sector56 */ +#define OB_WRP1_Pages912to927 ((uint32_t)0x02000000) /* Write protection of Sector57 */ +#define OB_WRP1_Pages928to943 ((uint32_t)0x04000000) /* Write protection of Sector58 */ +#define OB_WRP1_Pages944to959 ((uint32_t)0x08000000) /* Write protection of Sector59 */ +#define OB_WRP1_Pages960to975 ((uint32_t)0x10000000) /* Write protection of Sector60 */ +#define OB_WRP1_Pages976to991 ((uint32_t)0x20000000) /* Write protection of Sector61 */ +#define OB_WRP1_Pages992to1007 ((uint32_t)0x40000000) /* Write protection of Sector62 */ +#define OB_WRP1_Pages1008to1023 ((uint32_t)0x80000000) /* Write protection of Sector63 */ + +#define OB_WRP1_AllPages ((uint32_t)0xFFFFFFFF) /*!< Write protection of all Sectors */ + +#define OB_WRP2_Pages1024to1039 ((uint32_t)0x00000001) /* Write protection of Sector64 */ +#define OB_WRP2_Pages1040to1055 ((uint32_t)0x00000002) /* Write protection of Sector65 */ +#define OB_WRP2_Pages1056to1071 ((uint32_t)0x00000004) /* Write protection of Sector66 */ +#define OB_WRP2_Pages1072to1087 ((uint32_t)0x00000008) /* Write protection of Sector67 */ +#define OB_WRP2_Pages1088to1103 ((uint32_t)0x00000010) /* Write protection of Sector68 */ +#define OB_WRP2_Pages1104to1119 ((uint32_t)0x00000020) /* Write protection of Sector69 */ +#define OB_WRP2_Pages1120to1135 ((uint32_t)0x00000040) /* Write protection of Sector70 */ +#define OB_WRP2_Pages1136to1151 ((uint32_t)0x00000080) /* Write protection of Sector71 */ +#define OB_WRP2_Pages1152to1167 ((uint32_t)0x00000100) /* Write protection of Sector72 */ +#define OB_WRP2_Pages1168to1183 ((uint32_t)0x00000200) /* Write protection of Sector73 */ +#define OB_WRP2_Pages1184to1199 ((uint32_t)0x00000400) /* Write protection of Sector74 */ +#define OB_WRP2_Pages1200to1215 ((uint32_t)0x00000800) /* Write protection of Sector75 */ +#define OB_WRP2_Pages1216to1231 ((uint32_t)0x00001000) /* Write protection of Sector76 */ +#define OB_WRP2_Pages1232to1247 ((uint32_t)0x00002000) /* Write protection of Sector77 */ +#define OB_WRP2_Pages1248to1263 ((uint32_t)0x00004000) /* Write protection of Sector78 */ +#define OB_WRP2_Pages1264to1279 ((uint32_t)0x00008000) /* Write protection of Sector79 */ +#define OB_WRP2_Pages1280to1295 ((uint32_t)0x00010000) /* Write protection of Sector80 */ +#define OB_WRP2_Pages1296to1311 ((uint32_t)0x00020000) /* Write protection of Sector81 */ +#define OB_WRP2_Pages1312to1327 ((uint32_t)0x00040000) /* Write protection of Sector82 */ +#define OB_WRP2_Pages1328to1343 ((uint32_t)0x00080000) /* Write protection of Sector83 */ +#define OB_WRP2_Pages1344to1359 ((uint32_t)0x00100000) /* Write protection of Sector84 */ +#define OB_WRP2_Pages1360to1375 ((uint32_t)0x00200000) /* Write protection of Sector85 */ +#define OB_WRP2_Pages1376to1391 ((uint32_t)0x00400000) /* Write protection of Sector86 */ +#define OB_WRP2_Pages1392to1407 ((uint32_t)0x00800000) /* Write protection of Sector87 */ +#define OB_WRP2_Pages1408to1423 ((uint32_t)0x01000000) /* Write protection of Sector88 */ +#define OB_WRP2_Pages1424to1439 ((uint32_t)0x02000000) /* Write protection of Sector89 */ +#define OB_WRP2_Pages1440to1455 ((uint32_t)0x04000000) /* Write protection of Sector90 */ +#define OB_WRP2_Pages1456to1471 ((uint32_t)0x08000000) /* Write protection of Sector91 */ +#define OB_WRP2_Pages1472to1487 ((uint32_t)0x10000000) /* Write protection of Sector92 */ +#define OB_WRP2_Pages1488to1503 ((uint32_t)0x20000000) /* Write protection of Sector93 */ +#define OB_WRP2_Pages1504to1519 ((uint32_t)0x40000000) /* Write protection of Sector94 */ +#define OB_WRP2_Pages1520to1535 ((uint32_t)0x80000000) /* Write protection of Sector95 */ + +#define OB_WRP2_AllPages ((uint32_t)0xFFFFFFFF) /*!< Write protection of all Sectors */ + +#define IS_OB_WRP(PAGE) (((PAGE) != 0x0000000)) + +/** + * @} + */ + +/** @defgroup Option_Bytes_Read_Protection + * @{ + */ + +/** + * @brief Read Protection Level + */ +#define OB_RDP_Level_0 ((uint8_t)0xAA) +#define OB_RDP_Level_1 ((uint8_t)0xBB) +/*#define OB_RDP_Level_2 ((uint8_t)0xCC)*/ /* Warning: When enabling read protection level 2 + it's no more possible to go back to level 1 or 0 */ + +#define IS_OB_RDP(LEVEL) (((LEVEL) == OB_RDP_Level_0)||\ + ((LEVEL) == OB_RDP_Level_1))/*||\ + ((LEVEL) == OB_RDP_Level_2))*/ +/** + * @} + */ + +/** @defgroup Option_Bytes_IWatchdog + * @{ + */ + +#define OB_IWDG_SW ((uint8_t)0x10) /*!< Software WDG selected */ +#define OB_IWDG_HW ((uint8_t)0x00) /*!< Hardware WDG selected */ +#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW)) + +/** + * @} + */ + +/** @defgroup Option_Bytes_nRST_STOP + * @{ + */ + +#define OB_STOP_NoRST ((uint8_t)0x20) /*!< No reset generated when entering in STOP */ +#define OB_STOP_RST ((uint8_t)0x00) /*!< Reset generated when entering in STOP */ +#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NoRST) || ((SOURCE) == OB_STOP_RST)) + +/** + * @} + */ + +/** @defgroup Option_Bytes_nRST_STDBY + * @{ + */ + +#define OB_STDBY_NoRST ((uint8_t)0x40) /*!< No reset generated when entering in STANDBY */ +#define OB_STDBY_RST ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY */ +#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NoRST) || ((SOURCE) == OB_STDBY_RST)) + +/** + * @} + */ + +/** @defgroup Option_Bytes_BOOT + * @{ + */ + +#define OB_BOOT_BANK2 ((uint8_t)0x00) /*!< At startup, if boot pins are set in boot from user Flash position + and this parameter is selected the device will boot from Bank 2 + or Bank 1, depending on the activation of the bank */ +#define OB_BOOT_BANK1 ((uint8_t)0x80) /*!< At startup, if boot pins are set in boot from user Flash position + and this parameter is selected the device will boot from Bank1(Default) */ +#define IS_OB_BOOT_BANK(BANK) (((BANK) == OB_BOOT_BANK2) || ((BANK) == OB_BOOT_BANK1)) + +/** + * @} + */ + +/** @defgroup Option_Bytes_BOR_Level + * @{ + */ + +#define OB_BOR_OFF ((uint8_t)0x00) /*!< BOR is disabled at power down, the reset is asserted when the VDD + power supply reaches the PDR(Power Down Reset) threshold (1.5V) */ +#define OB_BOR_LEVEL1 ((uint8_t)0x08) /*!< BOR Reset threshold levels for 1.7V - 1.8V VDD power supply */ +#define OB_BOR_LEVEL2 ((uint8_t)0x09) /*!< BOR Reset threshold levels for 1.9V - 2.0V VDD power supply */ +#define OB_BOR_LEVEL3 ((uint8_t)0x0A) /*!< BOR Reset threshold levels for 2.3V - 2.4V VDD power supply */ +#define OB_BOR_LEVEL4 ((uint8_t)0x0B) /*!< BOR Reset threshold levels for 2.55V - 2.65V VDD power supply */ +#define OB_BOR_LEVEL5 ((uint8_t)0x0C) /*!< BOR Reset threshold levels for 2.8V - 2.9V VDD power supply */ + +#define IS_OB_BOR_LEVEL(LEVEL) (((LEVEL) == OB_BOR_OFF) || \ + ((LEVEL) == OB_BOR_LEVEL1) || \ + ((LEVEL) == OB_BOR_LEVEL2) || \ + ((LEVEL) == OB_BOR_LEVEL3) || \ + ((LEVEL) == OB_BOR_LEVEL4) || \ + ((LEVEL) == OB_BOR_LEVEL5)) + +/** + * @} + */ + +/** @defgroup FLASH_Flags + * @{ + */ + +#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */ +#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Programming flag */ +#define FLASH_FLAG_ENDHV FLASH_SR_ENHV /*!< FLASH End of High Voltage flag */ +#define FLASH_FLAG_READY FLASH_SR_READY /*!< FLASH Ready flag after low power mode */ +#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */ +#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */ +#define FLASH_FLAG_SIZERR FLASH_SR_SIZERR /*!< FLASH Size error flag */ +#define FLASH_FLAG_OPTVERR FLASH_SR_OPTVERR /*!< FLASH Option Validity error flag */ +#define FLASH_FLAG_OPTVERRUSR FLASH_SR_OPTVERRUSR /*!< FLASH Option User Validity error flag */ + +#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFE0FD) == 0x00000000) && ((FLAG) != 0x00000000)) + +#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_EOP) || \ + ((FLAG) == FLASH_FLAG_ENDHV) || ((FLAG) == FLASH_FLAG_READY ) || \ + ((FLAG) == FLASH_FLAG_WRPERR) || ((FLAG) == FLASH_FLAG_PGAERR ) || \ + ((FLAG) == FLASH_FLAG_SIZERR) || ((FLAG) == FLASH_FLAG_OPTVERR) || \ + ((FLAG) == FLASH_FLAG_OPTVERRUSR)) +/** + * @} + */ + +/** @defgroup FLASH_Keys + * @{ + */ + +#define FLASH_PDKEY1 ((uint32_t)0x04152637) /*!< Flash power down key1 */ +#define FLASH_PDKEY2 ((uint32_t)0xFAFBFCFD) /*!< Flash power down key2: used with FLASH_PDKEY1 + to unlock the RUN_PD bit in FLASH_ACR */ + +#define FLASH_PEKEY1 ((uint32_t)0x89ABCDEF) /*!< Flash program erase key1 */ +#define FLASH_PEKEY2 ((uint32_t)0x02030405) /*!< Flash program erase key: used with FLASH_PEKEY2 + to unlock the write access to the FLASH_PECR register and + data EEPROM */ + +#define FLASH_PRGKEY1 ((uint32_t)0x8C9DAEBF) /*!< Flash program memory key1 */ +#define FLASH_PRGKEY2 ((uint32_t)0x13141516) /*!< Flash program memory key2: used with FLASH_PRGKEY2 + to unlock the program memory */ + +#define FLASH_OPTKEY1 ((uint32_t)0xFBEAD9C8) /*!< Flash option key1 */ +#define FLASH_OPTKEY2 ((uint32_t)0x24252627) /*!< Flash option key2: used with FLASH_OPTKEY1 to + unlock the write access to the option byte block */ +/** + * @} + */ + +/** @defgroup Timeout_definition + * @{ + */ +#define FLASH_ER_PRG_TIMEOUT ((uint32_t)0x8000) + +/** + * @} + */ + +/** @defgroup CMSIS_Legacy + * @{ + */ +#if defined ( __ICCARM__ ) +#define InterruptType_ACTLR_DISMCYCINT_Msk IntType_ACTLR_DISMCYCINT_Msk +#endif +/** + * @} + */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/** + * @brief FLASH memory functions that can be executed from FLASH. + */ +/* FLASH Interface configuration functions ************************************/ +void FLASH_SetLatency(uint32_t FLASH_Latency); +void FLASH_PrefetchBufferCmd(FunctionalState NewState); +void FLASH_ReadAccess64Cmd(FunctionalState NewState); +void FLASH_SLEEPPowerDownCmd(FunctionalState NewState); + +/* FLASH Memory Programming functions *****************************************/ +void FLASH_Unlock(void); +void FLASH_Lock(void); +FLASH_Status FLASH_ErasePage(uint32_t Page_Address); +FLASH_Status FLASH_FastProgramWord(uint32_t Address, uint32_t Data); + +/* DATA EEPROM Programming functions ******************************************/ +void DATA_EEPROM_Unlock(void); +void DATA_EEPROM_Lock(void); +void DATA_EEPROM_FixedTimeProgramCmd(FunctionalState NewState); +FLASH_Status DATA_EEPROM_EraseByte(uint32_t Address); +FLASH_Status DATA_EEPROM_EraseHalfWord(uint32_t Address); +FLASH_Status DATA_EEPROM_EraseWord(uint32_t Address); +FLASH_Status DATA_EEPROM_FastProgramByte(uint32_t Address, uint8_t Data); +FLASH_Status DATA_EEPROM_FastProgramHalfWord(uint32_t Address, uint16_t Data); +FLASH_Status DATA_EEPROM_FastProgramWord(uint32_t Address, uint32_t Data); +FLASH_Status DATA_EEPROM_ProgramByte(uint32_t Address, uint8_t Data); +FLASH_Status DATA_EEPROM_ProgramHalfWord(uint32_t Address, uint16_t Data); +FLASH_Status DATA_EEPROM_ProgramWord(uint32_t Address, uint32_t Data); + +/* Option Bytes Programming functions *****************************************/ +void FLASH_OB_Unlock(void); +void FLASH_OB_Lock(void); +void FLASH_OB_Launch(void); +FLASH_Status FLASH_OB_WRPConfig(uint32_t OB_WRP, FunctionalState NewState); +FLASH_Status FLASH_OB_WRP1Config(uint32_t OB_WRP1, FunctionalState NewState); +FLASH_Status FLASH_OB_WRP2Config(uint32_t OB_WRP2, FunctionalState NewState); +FLASH_Status FLASH_OB_RDPConfig(uint8_t OB_RDP); +FLASH_Status FLASH_OB_UserConfig(uint8_t OB_IWDG, uint8_t OB_STOP, uint8_t OB_STDBY); +FLASH_Status FLASH_OB_BORConfig(uint8_t OB_BOR); +FLASH_Status FLASH_OB_BootConfig(uint8_t OB_BOOT); +uint8_t FLASH_OB_GetUser(void); +uint32_t FLASH_OB_GetWRP(void); +uint32_t FLASH_OB_GetWRP1(void); +uint32_t FLASH_OB_GetWRP2(void); +FlagStatus FLASH_OB_GetRDP(void); +uint8_t FLASH_OB_GetBOR(void); + +/* Interrupts and flags management functions **********************************/ +void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState); +FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG); +void FLASH_ClearFlag(uint32_t FLASH_FLAG); +FLASH_Status FLASH_GetStatus(void); +FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout); + +/** + * @brief FLASH memory functions that should be executed from internal SRAM. + * These functions are defined inside the "stm32l1xx_flash_ramfunc.c" + * file. + */ +__RAM_FUNC FLASH_RUNPowerDownCmd(FunctionalState NewState); +__RAM_FUNC FLASH_EraseParallelPage(uint32_t Page_Address1, uint32_t Page_Address2); +__RAM_FUNC FLASH_ProgramHalfPage(uint32_t Address, uint32_t* pBuffer); +__RAM_FUNC FLASH_ProgramParallelHalfPage(uint32_t Address1, uint32_t* pBuffer1, uint32_t Address2, uint32_t* pBuffer2); +__RAM_FUNC DATA_EEPROM_EraseDoubleWord(uint32_t Address); +__RAM_FUNC DATA_EEPROM_ProgramDoubleWord(uint32_t Address, uint64_t Data); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_FLASH_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_fsmc.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_fsmc.h new file mode 100644 index 0000000..1f6a277 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_fsmc.h @@ -0,0 +1,438 @@ +/** + ****************************************************************************** + * @file stm32l1xx_fsmc.h + * @author MCD Application Team + * @version V1.1.1 + * @date 05-March-2012 + * @brief This file contains all the functions prototypes for the FSMC firmware + * library. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_FSMC_H +#define __STM32L1xx_FSMC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup FSMC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief Timing parameters For NOR/SRAM Banks + */ + +typedef struct +{ + uint32_t FSMC_AddressSetupTime; /*!< Defines the number of HCLK cycles to configure + the duration of the address setup time. + This parameter can be a value between 0 and 0xF. + @note It is not used with synchronous NOR Flash memories. */ + + uint32_t FSMC_AddressHoldTime; /*!< Defines the number of HCLK cycles to configure + the duration of the address hold time. + This parameter can be a value between 0 and 0xF. + @note It is not used with synchronous NOR Flash memories.*/ + + uint32_t FSMC_DataSetupTime; /*!< Defines the number of HCLK cycles to configure + the duration of the data setup time. + This parameter can be a value between 0 and 0xFF. + @note It is used for SRAMs, ROMs and asynchronous multiplexed NOR Flash memories. */ + + uint32_t FSMC_BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure + the duration of the bus turnaround. + This parameter can be a value between 0 and 0xF. + @note It is only used for multiplexed NOR Flash memories. */ + + uint32_t FSMC_CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of HCLK cycles. + This parameter can be a value between 1 and 0xF. + @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM accesses. */ + + uint32_t FSMC_DataLatency; /*!< Defines the number of memory clock cycles to issue + to the memory before getting the first data. + The parameter value depends on the memory type as shown below: + - It must be set to 0 in case of a CRAM + - It is don't care in asynchronous NOR, SRAM or ROM accesses + - It may assume a value between 0 and 0xF in NOR Flash memories + with synchronous burst mode enable */ + + uint32_t FSMC_AccessMode; /*!< Specifies the asynchronous access mode. + This parameter can be a value of @ref FSMC_Access_Mode */ +}FSMC_NORSRAMTimingInitTypeDef; + +/** + * @brief FSMC NOR/SRAM Init structure definition + */ + +typedef struct +{ + uint32_t FSMC_Bank; /*!< Specifies the NOR/SRAM memory bank that will be used. + This parameter can be a value of @ref FSMC_NORSRAM_Bank */ + + uint32_t FSMC_DataAddressMux; /*!< Specifies whether the address and data values are + multiplexed on the databus or not. + This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing */ + + uint32_t FSMC_MemoryType; /*!< Specifies the type of external memory attached to + the corresponding memory bank. + This parameter can be a value of @ref FSMC_Memory_Type */ + + uint32_t FSMC_MemoryDataWidth; /*!< Specifies the external memory device width. + This parameter can be a value of @ref FSMC_Data_Width */ + + uint32_t FSMC_BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory, + valid only with synchronous burst Flash memories. + This parameter can be a value of @ref FSMC_Burst_Access_Mode */ + + uint32_t FSMC_AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers, + valid only with asynchronous Flash memories. + This parameter can be a value of @ref FSMC_AsynchronousWait */ + + uint32_t FSMC_WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing + the Flash memory in burst mode. + This parameter can be a value of @ref FSMC_Wait_Signal_Polarity */ + + uint32_t FSMC_WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash + memory, valid only when accessing Flash memories in burst mode. + This parameter can be a value of @ref FSMC_Wrap_Mode */ + + uint32_t FSMC_WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one + clock cycle before the wait state or during the wait state, + valid only when accessing memories in burst mode. + This parameter can be a value of @ref FSMC_Wait_Timing */ + + uint32_t FSMC_WriteOperation; /*!< Enables or disables the write operation in the selected bank by the FSMC. + This parameter can be a value of @ref FSMC_Write_Operation */ + + uint32_t FSMC_WaitSignal; /*!< Enables or disables the wait-state insertion via wait + signal, valid for Flash memory access in burst mode. + This parameter can be a value of @ref FSMC_Wait_Signal */ + + uint32_t FSMC_ExtendedMode; /*!< Enables or disables the extended mode. + This parameter can be a value of @ref FSMC_Extended_Mode */ + + uint32_t FSMC_WriteBurst; /*!< Enables or disables the write burst operation. + This parameter can be a value of @ref FSMC_Write_Burst */ + + FSMC_NORSRAMTimingInitTypeDef* FSMC_ReadWriteTimingStruct; /*!< Timing Parameters for write and read access if the ExtendedMode is not used*/ + + FSMC_NORSRAMTimingInitTypeDef* FSMC_WriteTimingStruct; /*!< Timing Parameters for write access if the ExtendedMode is used*/ +}FSMC_NORSRAMInitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup FSMC_Exported_Constants + * @{ + */ + +/** @defgroup FSMC_NORSRAM_Bank + * @{ + */ +#define FSMC_Bank1_NORSRAM1 ((uint32_t)0x00000000) +#define FSMC_Bank1_NORSRAM2 ((uint32_t)0x00000002) +#define FSMC_Bank1_NORSRAM3 ((uint32_t)0x00000004) +#define FSMC_Bank1_NORSRAM4 ((uint32_t)0x00000006) + +#define IS_FSMC_NORSRAM_BANK(BANK) (((BANK) == FSMC_Bank1_NORSRAM1) || \ + ((BANK) == FSMC_Bank1_NORSRAM2) || \ + ((BANK) == FSMC_Bank1_NORSRAM3) || \ + ((BANK) == FSMC_Bank1_NORSRAM4)) +/** + * @} + */ + +/** @defgroup NOR_SRAM_Controller + * @{ + */ + +/** @defgroup FSMC_Data_Address_Bus_Multiplexing + * @{ + */ + +#define FSMC_DataAddressMux_Disable ((uint32_t)0x00000000) +#define FSMC_DataAddressMux_Enable ((uint32_t)0x00000002) +#define IS_FSMC_MUX(MUX) (((MUX) == FSMC_DataAddressMux_Disable) || \ + ((MUX) == FSMC_DataAddressMux_Enable)) + +/** + * @} + */ + +/** @defgroup FSMC_Memory_Type + * @{ + */ + +#define FSMC_MemoryType_SRAM ((uint32_t)0x00000000) +#define FSMC_MemoryType_PSRAM ((uint32_t)0x00000004) +#define FSMC_MemoryType_NOR ((uint32_t)0x00000008) +#define IS_FSMC_MEMORY(MEMORY) (((MEMORY) == FSMC_MemoryType_SRAM) || \ + ((MEMORY) == FSMC_MemoryType_PSRAM)|| \ + ((MEMORY) == FSMC_MemoryType_NOR)) + +/** + * @} + */ + +/** @defgroup FSMC_Data_Width + * @{ + */ + +#define FSMC_MemoryDataWidth_8b ((uint32_t)0x00000000) +#define FSMC_MemoryDataWidth_16b ((uint32_t)0x00000010) +#define IS_FSMC_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_MemoryDataWidth_8b) || \ + ((WIDTH) == FSMC_MemoryDataWidth_16b)) + +/** + * @} + */ + +/** @defgroup FSMC_Burst_Access_Mode + * @{ + */ + +#define FSMC_BurstAccessMode_Disable ((uint32_t)0x00000000) +#define FSMC_BurstAccessMode_Enable ((uint32_t)0x00000100) +#define IS_FSMC_BURSTMODE(STATE) (((STATE) == FSMC_BurstAccessMode_Disable) || \ + ((STATE) == FSMC_BurstAccessMode_Enable)) +/** + * @} + */ + +/** @defgroup FSMC_AsynchronousWait + * @{ + */ +#define FSMC_AsynchronousWait_Disable ((uint32_t)0x00000000) +#define FSMC_AsynchronousWait_Enable ((uint32_t)0x00008000) +#define IS_FSMC_ASYNWAIT(STATE) (((STATE) == FSMC_AsynchronousWait_Disable) || \ + ((STATE) == FSMC_AsynchronousWait_Enable)) + +/** + * @} + */ + +/** @defgroup FSMC_Wait_Signal_Polarity + * @{ + */ + +#define FSMC_WaitSignalPolarity_Low ((uint32_t)0x00000000) +#define FSMC_WaitSignalPolarity_High ((uint32_t)0x00000200) +#define IS_FSMC_WAIT_POLARITY(POLARITY) (((POLARITY) == FSMC_WaitSignalPolarity_Low) || \ + ((POLARITY) == FSMC_WaitSignalPolarity_High)) + +/** + * @} + */ + +/** @defgroup FSMC_Wrap_Mode + * @{ + */ + +#define FSMC_WrapMode_Disable ((uint32_t)0x00000000) +#define FSMC_WrapMode_Enable ((uint32_t)0x00000400) +#define IS_FSMC_WRAP_MODE(MODE) (((MODE) == FSMC_WrapMode_Disable) || \ + ((MODE) == FSMC_WrapMode_Enable)) + +/** + * @} + */ + +/** @defgroup FSMC_Wait_Timing + * @{ + */ + +#define FSMC_WaitSignalActive_BeforeWaitState ((uint32_t)0x00000000) +#define FSMC_WaitSignalActive_DuringWaitState ((uint32_t)0x00000800) +#define IS_FSMC_WAIT_SIGNAL_ACTIVE(ACTIVE) (((ACTIVE) == FSMC_WaitSignalActive_BeforeWaitState) || \ + ((ACTIVE) == FSMC_WaitSignalActive_DuringWaitState)) + +/** + * @} + */ + +/** @defgroup FSMC_Write_Operation + * @{ + */ + +#define FSMC_WriteOperation_Disable ((uint32_t)0x00000000) +#define FSMC_WriteOperation_Enable ((uint32_t)0x00001000) +#define IS_FSMC_WRITE_OPERATION(OPERATION) (((OPERATION) == FSMC_WriteOperation_Disable) || \ + ((OPERATION) == FSMC_WriteOperation_Enable)) + +/** + * @} + */ + +/** @defgroup FSMC_Wait_Signal + * @{ + */ + +#define FSMC_WaitSignal_Disable ((uint32_t)0x00000000) +#define FSMC_WaitSignal_Enable ((uint32_t)0x00002000) +#define IS_FSMC_WAITE_SIGNAL(SIGNAL) (((SIGNAL) == FSMC_WaitSignal_Disable) || \ + ((SIGNAL) == FSMC_WaitSignal_Enable)) +/** + * @} + */ + +/** @defgroup FSMC_Extended_Mode + * @{ + */ + +#define FSMC_ExtendedMode_Disable ((uint32_t)0x00000000) +#define FSMC_ExtendedMode_Enable ((uint32_t)0x00004000) + +#define IS_FSMC_EXTENDED_MODE(MODE) (((MODE) == FSMC_ExtendedMode_Disable) || \ + ((MODE) == FSMC_ExtendedMode_Enable)) + +/** + * @} + */ + +/** @defgroup FSMC_Write_Burst + * @{ + */ + +#define FSMC_WriteBurst_Disable ((uint32_t)0x00000000) +#define FSMC_WriteBurst_Enable ((uint32_t)0x00080000) +#define IS_FSMC_WRITE_BURST(BURST) (((BURST) == FSMC_WriteBurst_Disable) || \ + ((BURST) == FSMC_WriteBurst_Enable)) +/** + * @} + */ + +/** @defgroup FSMC_Address_Setup_Time + * @{ + */ + +#define IS_FSMC_ADDRESS_SETUP_TIME(TIME) ((TIME) <= 0xF) + +/** + * @} + */ + +/** @defgroup FSMC_Address_Hold_Time + * @{ + */ + +#define IS_FSMC_ADDRESS_HOLD_TIME(TIME) ((TIME) <= 0xF) + +/** + * @} + */ + +/** @defgroup FSMC_Data_Setup_Time + * @{ + */ + +#define IS_FSMC_DATASETUP_TIME(TIME) (((TIME) > 0) && ((TIME) <= 0xFF)) + +/** + * @} + */ + +/** @defgroup FSMC_Bus_Turn_around_Duration + * @{ + */ + +#define IS_FSMC_TURNAROUND_TIME(TIME) ((TIME) <= 0xF) + +/** + * @} + */ + +/** @defgroup FSMC_CLK_Division + * @{ + */ + +#define IS_FSMC_CLK_DIV(DIV) ((DIV) <= 0xF) + +/** + * @} + */ + +/** @defgroup FSMC_Data_Latency + * @{ + */ + +#define IS_FSMC_DATA_LATENCY(LATENCY) ((LATENCY) <= 0xF) + +/** + * @} + */ + +/** @defgroup FSMC_Access_Mode + * @{ + */ + +#define FSMC_AccessMode_A ((uint32_t)0x00000000) +#define FSMC_AccessMode_B ((uint32_t)0x10000000) +#define FSMC_AccessMode_C ((uint32_t)0x20000000) +#define FSMC_AccessMode_D ((uint32_t)0x30000000) +#define IS_FSMC_ACCESS_MODE(MODE) (((MODE) == FSMC_AccessMode_A) || \ + ((MODE) == FSMC_AccessMode_B) || \ + ((MODE) == FSMC_AccessMode_C) || \ + ((MODE) == FSMC_AccessMode_D)) + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ +/* NOR/SRAM Controller functions **********************************************/ +void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank); +void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct); +void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct); +void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32L1xx_FSMC_H */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_gpio.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_gpio.h new file mode 100644 index 0000000..fb072b5 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_gpio.h @@ -0,0 +1,391 @@ +/** + ****************************************************************************** + * @file stm32l1xx_gpio.h + * @author MCD Application Team + * @version V1.1.1 + * @date 05-March-2012 + * @brief This file contains all the functions prototypes for the GPIO + * firmware library. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_GPIO_H +#define __STM32L1xx_GPIO_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup GPIO + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +#define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \ + ((PERIPH) == GPIOB) || \ + ((PERIPH) == GPIOC) || \ + ((PERIPH) == GPIOD) || \ + ((PERIPH) == GPIOE) || \ + ((PERIPH) == GPIOH) || \ + ((PERIPH) == GPIOF) || \ + ((PERIPH) == GPIOG)) + +/** @defgroup Configuration_Mode_enumeration + * @{ + */ +typedef enum +{ + GPIO_Mode_IN = 0x00, /*!< GPIO Input Mode */ + GPIO_Mode_OUT = 0x01, /*!< GPIO Output Mode */ + GPIO_Mode_AF = 0x02, /*!< GPIO Alternate function Mode */ + GPIO_Mode_AN = 0x03 /*!< GPIO Analog Mode */ +}GPIOMode_TypeDef; +#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_IN) || ((MODE) == GPIO_Mode_OUT) || \ + ((MODE) == GPIO_Mode_AF)|| ((MODE) == GPIO_Mode_AN)) +/** + * @} + */ + +/** @defgroup Output_type_enumeration + * @{ + */ +typedef enum +{ GPIO_OType_PP = 0x00, + GPIO_OType_OD = 0x01 +}GPIOOType_TypeDef; +#define IS_GPIO_OTYPE(OTYPE) (((OTYPE) == GPIO_OType_PP) || ((OTYPE) == GPIO_OType_OD)) + +/** + * @} + */ + +/** @defgroup Output_Maximum_frequency_enumeration + * @{ + */ +typedef enum +{ + GPIO_Speed_400KHz = 0x00, /*!< Very Low Speed */ + GPIO_Speed_2MHz = 0x01, /*!< Low Speed */ + GPIO_Speed_10MHz = 0x02, /*!< Medium Speed */ + GPIO_Speed_40MHz = 0x03 /*!< High Speed */ +}GPIOSpeed_TypeDef; +#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_400KHz) || ((SPEED) == GPIO_Speed_2MHz) || \ + ((SPEED) == GPIO_Speed_10MHz)|| ((SPEED) == GPIO_Speed_40MHz)) +/** + * @} + */ + +/** @defgroup Configuration_Pull-Up_Pull-Down_enumeration + * @{ + */ +typedef enum +{ GPIO_PuPd_NOPULL = 0x00, + GPIO_PuPd_UP = 0x01, + GPIO_PuPd_DOWN = 0x02 +}GPIOPuPd_TypeDef; +#define IS_GPIO_PUPD(PUPD) (((PUPD) == GPIO_PuPd_NOPULL) || ((PUPD) == GPIO_PuPd_UP) || \ + ((PUPD) == GPIO_PuPd_DOWN)) +/** + * @} + */ + +/** @defgroup Bit_SET_and_Bit_RESET_enumeration + * @{ + */ +typedef enum +{ Bit_RESET = 0, + Bit_SET +}BitAction; +#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET)) + +/** + * @} + */ + +/** + * @brief GPIO Init structure definition + */ +typedef struct +{ + uint32_t GPIO_Pin; /*!< Specifies the GPIO pins to be configured. + This parameter can be any value of @ref GPIO_pins_define */ + + GPIOMode_TypeDef GPIO_Mode; /*!< Specifies the operating mode for the selected pins. + This parameter can be a value of @ref GPIOMode_TypeDef */ + + GPIOSpeed_TypeDef GPIO_Speed; /*!< Specifies the speed for the selected pins. + This parameter can be a value of @ref GPIOSpeed_TypeDef */ + + GPIOOType_TypeDef GPIO_OType; /*!< Specifies the operating output type for the selected pins. + This parameter can be a value of @ref GPIOOType_TypeDef */ + + GPIOPuPd_TypeDef GPIO_PuPd; /*!< Specifies the operating Pull-up/Pull down for the selected pins. + This parameter can be a value of @ref GPIOPuPd_TypeDef */ +}GPIO_InitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup GPIO_Exported_Constants + * @{ + */ + +/** @defgroup GPIO_pins_define + * @{ + */ +#define GPIO_Pin_0 ((uint16_t)0x0001) /*!< Pin 0 selected */ +#define GPIO_Pin_1 ((uint16_t)0x0002) /*!< Pin 1 selected */ +#define GPIO_Pin_2 ((uint16_t)0x0004) /*!< Pin 2 selected */ +#define GPIO_Pin_3 ((uint16_t)0x0008) /*!< Pin 3 selected */ +#define GPIO_Pin_4 ((uint16_t)0x0010) /*!< Pin 4 selected */ +#define GPIO_Pin_5 ((uint16_t)0x0020) /*!< Pin 5 selected */ +#define GPIO_Pin_6 ((uint16_t)0x0040) /*!< Pin 6 selected */ +#define GPIO_Pin_7 ((uint16_t)0x0080) /*!< Pin 7 selected */ +#define GPIO_Pin_8 ((uint16_t)0x0100) /*!< Pin 8 selected */ +#define GPIO_Pin_9 ((uint16_t)0x0200) /*!< Pin 9 selected */ +#define GPIO_Pin_10 ((uint16_t)0x0400) /*!< Pin 10 selected */ +#define GPIO_Pin_11 ((uint16_t)0x0800) /*!< Pin 11 selected */ +#define GPIO_Pin_12 ((uint16_t)0x1000) /*!< Pin 12 selected */ +#define GPIO_Pin_13 ((uint16_t)0x2000) /*!< Pin 13 selected */ +#define GPIO_Pin_14 ((uint16_t)0x4000) /*!< Pin 14 selected */ +#define GPIO_Pin_15 ((uint16_t)0x8000) /*!< Pin 15 selected */ +#define GPIO_Pin_All ((uint16_t)0xFFFF) /*!< All pins selected */ + +#define IS_GPIO_PIN(PIN) ((PIN) != (uint16_t)0x00) +#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \ + ((PIN) == GPIO_Pin_1) || \ + ((PIN) == GPIO_Pin_2) || \ + ((PIN) == GPIO_Pin_3) || \ + ((PIN) == GPIO_Pin_4) || \ + ((PIN) == GPIO_Pin_5) || \ + ((PIN) == GPIO_Pin_6) || \ + ((PIN) == GPIO_Pin_7) || \ + ((PIN) == GPIO_Pin_8) || \ + ((PIN) == GPIO_Pin_9) || \ + ((PIN) == GPIO_Pin_10) || \ + ((PIN) == GPIO_Pin_11) || \ + ((PIN) == GPIO_Pin_12) || \ + ((PIN) == GPIO_Pin_13) || \ + ((PIN) == GPIO_Pin_14) || \ + ((PIN) == GPIO_Pin_15)) +/** + * @} + */ + +/** @defgroup GPIO_Pin_sources + * @{ + */ +#define GPIO_PinSource0 ((uint8_t)0x00) +#define GPIO_PinSource1 ((uint8_t)0x01) +#define GPIO_PinSource2 ((uint8_t)0x02) +#define GPIO_PinSource3 ((uint8_t)0x03) +#define GPIO_PinSource4 ((uint8_t)0x04) +#define GPIO_PinSource5 ((uint8_t)0x05) +#define GPIO_PinSource6 ((uint8_t)0x06) +#define GPIO_PinSource7 ((uint8_t)0x07) +#define GPIO_PinSource8 ((uint8_t)0x08) +#define GPIO_PinSource9 ((uint8_t)0x09) +#define GPIO_PinSource10 ((uint8_t)0x0A) +#define GPIO_PinSource11 ((uint8_t)0x0B) +#define GPIO_PinSource12 ((uint8_t)0x0C) +#define GPIO_PinSource13 ((uint8_t)0x0D) +#define GPIO_PinSource14 ((uint8_t)0x0E) +#define GPIO_PinSource15 ((uint8_t)0x0F) + +#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \ + ((PINSOURCE) == GPIO_PinSource1) || \ + ((PINSOURCE) == GPIO_PinSource2) || \ + ((PINSOURCE) == GPIO_PinSource3) || \ + ((PINSOURCE) == GPIO_PinSource4) || \ + ((PINSOURCE) == GPIO_PinSource5) || \ + ((PINSOURCE) == GPIO_PinSource6) || \ + ((PINSOURCE) == GPIO_PinSource7) || \ + ((PINSOURCE) == GPIO_PinSource8) || \ + ((PINSOURCE) == GPIO_PinSource9) || \ + ((PINSOURCE) == GPIO_PinSource10) || \ + ((PINSOURCE) == GPIO_PinSource11) || \ + ((PINSOURCE) == GPIO_PinSource12) || \ + ((PINSOURCE) == GPIO_PinSource13) || \ + ((PINSOURCE) == GPIO_PinSource14) || \ + ((PINSOURCE) == GPIO_PinSource15)) +/** + * @} + */ + +/** @defgroup GPIO_Alternat_function_selection_define + * @{ + */ + +/** + * @brief AF 0 selection + */ +#define GPIO_AF_RTC_50Hz ((uint8_t)0x00) /*!< RTC 50/60 Hz Alternate Function mapping */ +#define GPIO_AF_MCO ((uint8_t)0x00) /*!< MCO Alternate Function mapping */ +#define GPIO_AF_RTC_AF1 ((uint8_t)0x00) /*!< RTC_AF1 Alternate Function mapping */ +#define GPIO_AF_WKUP ((uint8_t)0x00) /*!< Wakeup (WKUP1, WKUP2 and WKUP3) Alternate Function mapping */ +#define GPIO_AF_SWJ ((uint8_t)0x00) /*!< SWJ (SW and JTAG) Alternate Function mapping */ +#define GPIO_AF_TRACE ((uint8_t)0x00) /*!< TRACE Alternate Function mapping */ + +/** + * @brief AF 1 selection + */ +#define GPIO_AF_TIM2 ((uint8_t)0x01) /*!< TIM2 Alternate Function mapping */ +/** + * @brief AF 2 selection + */ +#define GPIO_AF_TIM3 ((uint8_t)0x02) /*!< TIM3 Alternate Function mapping */ +#define GPIO_AF_TIM4 ((uint8_t)0x02) /*!< TIM4 Alternate Function mapping */ +#define GPIO_AF_TIM5 ((uint8_t)0x02) /*!< TIM5 Alternate Function mapping */ +/** + * @brief AF 3 selection + */ +#define GPIO_AF_TIM9 ((uint8_t)0x03) /*!< TIM9 Alternate Function mapping */ +#define GPIO_AF_TIM10 ((uint8_t)0x03) /*!< TIM10 Alternate Function mapping */ +#define GPIO_AF_TIM11 ((uint8_t)0x03) /*!< TIM11 Alternate Function mapping */ +/** + * @brief AF 4 selection + */ +#define GPIO_AF_I2C1 ((uint8_t)0x04) /*!< I2C1 Alternate Function mapping */ +#define GPIO_AF_I2C2 ((uint8_t)0x04) /*!< I2C2 Alternate Function mapping */ +/** + * @brief AF 5 selection + */ +#define GPIO_AF_SPI1 ((uint8_t)0x05) /*!< SPI1 Alternate Function mapping */ +#define GPIO_AF_SPI2 ((uint8_t)0x05) /*!< SPI2 Alternate Function mapping */ +/** + * @brief AF 6 selection + */ +#define GPIO_AF_SPI3 ((uint8_t)0x06) /*!< SPI3 Alternate Function mapping */ +/** + * @brief AF 7 selection + */ +#define GPIO_AF_USART1 ((uint8_t)0x07) /*!< USART1 Alternate Function mapping */ +#define GPIO_AF_USART2 ((uint8_t)0x07) /*!< USART2 Alternate Function mapping */ +#define GPIO_AF_USART3 ((uint8_t)0x07) /*!< USART3 Alternate Function mapping */ +/** + * @brief AF 8 selection + */ +#define GPIO_AF_UART4 ((uint8_t)0x08) /*!< UART4 Alternate Function mapping */ +#define GPIO_AF_UART5 ((uint8_t)0x08) /*!< UART5 Alternate Function mapping */ +/** + * @brief AF 10 selection + */ +#define GPIO_AF_USB ((uint8_t)0xA) /*!< USB Full speed device Alternate Function mapping */ +/** + * @brief AF 11 selection + */ +#define GPIO_AF_LCD ((uint8_t)0x0B) /*!< LCD Alternate Function mapping */ +/** + * @brief AF 12 selection + */ +#define GPIO_AF_FSMC ((uint8_t)0x0C) /*!< FSMC Alternate Function mapping */ +#define GPIO_AF_SDIO ((uint8_t)0x0C) /*!< SDIO Alternate Function mapping */ +/** + * @brief AF 14 selection + */ +#define GPIO_AF_RI ((uint8_t)0x0E) /*!< RI Alternate Function mapping */ + +/** + * @brief AF 15 selection + */ +#define GPIO_AF_EVENTOUT ((uint8_t)0x0F) /*!< EVENTOUT Alternate Function mapping */ + +#define IS_GPIO_AF(AF) (((AF) == GPIO_AF_RTC_50Hz) || ((AF) == GPIO_AF_MCO) || \ + ((AF) == GPIO_AF_RTC_AF1) || ((AF) == GPIO_AF_WKUP) || \ + ((AF) == GPIO_AF_SWJ) || ((AF) == GPIO_AF_TRACE) || \ + ((AF) == GPIO_AF_TIM2) || ((AF)== GPIO_AF_TIM3) || \ + ((AF) == GPIO_AF_TIM4) || ((AF)== GPIO_AF_TIM9) || \ + ((AF) == GPIO_AF_TIM10) || ((AF)== GPIO_AF_TIM11) || \ + ((AF) == GPIO_AF_I2C1) || ((AF) == GPIO_AF_I2C2) || \ + ((AF) == GPIO_AF_SPI1) || ((AF) == GPIO_AF_SPI2) || \ + ((AF) == GPIO_AF_USART1) || ((AF) == GPIO_AF_USART2) || \ + ((AF) == GPIO_AF_USART3) || ((AF) == GPIO_AF_USB) || \ + ((AF) == GPIO_AF_LCD) || ((AF) == GPIO_AF_RI) || \ + ((AF) == GPIO_AF_TIM5) || ((AF) == GPIO_AF_SPI3) || \ + ((AF) == GPIO_AF_UART4) || ((AF) == GPIO_AF_UART5) || \ + ((AF) == GPIO_AF_FSMC) || ((AF) == GPIO_AF_SDIO) || \ + ((AF) == GPIO_AF_EVENTOUT)) + +/** + * @} + */ + +/** @defgroup GPIO_Legacy + * @{ + */ + +#define GPIO_Mode_AIN GPIO_Mode_AN + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/* Function used to set the GPIO configuration to the default reset state ****/ +void GPIO_DeInit(GPIO_TypeDef* GPIOx); + +/* Initialization and Configuration functions *********************************/ +void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct); +void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct); +void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); + +/* GPIO Read and Write functions **********************************************/ +uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx); +uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx); +void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); +void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal); +void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal); +void GPIO_ToggleBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); + +/* GPIO Alternate functions configuration functions ***************************/ +void GPIO_PinAFConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_PinSource, uint8_t GPIO_AF); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32L1xx_GPIO_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_i2c.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_i2c.h new file mode 100644 index 0000000..6159e4e --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_i2c.h @@ -0,0 +1,703 @@ +/** + ****************************************************************************** + * @file stm32l1xx_i2c.h + * @author MCD Application Team + * @version V1.1.1 + * @date 05-March-2012 + * @brief This file contains all the functions prototypes for the I2C firmware + * library. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_I2C_H +#define __STM32L1xx_I2C_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup I2C + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief I2C Init structure definition + */ + +typedef struct +{ + uint32_t I2C_ClockSpeed; /*!< Specifies the clock frequency. + This parameter must be set to a value lower than 400kHz */ + + uint16_t I2C_Mode; /*!< Specifies the I2C mode. + This parameter can be a value of @ref I2C_mode */ + + uint16_t I2C_DutyCycle; /*!< Specifies the I2C fast mode duty cycle. + This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */ + + uint16_t I2C_OwnAddress1; /*!< Specifies the first device own address. + This parameter can be a 7-bit or 10-bit address. */ + + uint16_t I2C_Ack; /*!< Enables or disables the acknowledgement. + This parameter can be a value of @ref I2C_acknowledgement */ + + uint16_t I2C_AcknowledgedAddress; /*!< Specifies if 7-bit or 10-bit address is acknowledged. + This parameter can be a value of @ref I2C_acknowledged_address */ +}I2C_InitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + + +/** @defgroup I2C_Exported_Constants + * @{ + */ + +#define IS_I2C_ALL_PERIPH(PERIPH) (((PERIPH) == I2C1) || \ + ((PERIPH) == I2C2)) +/** @defgroup I2C_mode + * @{ + */ + +#define I2C_Mode_I2C ((uint16_t)0x0000) +#define I2C_Mode_SMBusDevice ((uint16_t)0x0002) +#define I2C_Mode_SMBusHost ((uint16_t)0x000A) +#define IS_I2C_MODE(MODE) (((MODE) == I2C_Mode_I2C) || \ + ((MODE) == I2C_Mode_SMBusDevice) || \ + ((MODE) == I2C_Mode_SMBusHost)) +/** + * @} + */ + +/** @defgroup I2C_duty_cycle_in_fast_mode + * @{ + */ + +#define I2C_DutyCycle_16_9 ((uint16_t)0x4000) /*!< I2C fast mode Tlow/Thigh = 16/9 */ +#define I2C_DutyCycle_2 ((uint16_t)0xBFFF) /*!< I2C fast mode Tlow/Thigh = 2 */ +#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DutyCycle_16_9) || \ + ((CYCLE) == I2C_DutyCycle_2)) +/** + * @} + */ + +/** @defgroup I2C_acknowledgement + * @{ + */ + +#define I2C_Ack_Enable ((uint16_t)0x0400) +#define I2C_Ack_Disable ((uint16_t)0x0000) +#define IS_I2C_ACK_STATE(STATE) (((STATE) == I2C_Ack_Enable) || \ + ((STATE) == I2C_Ack_Disable)) +/** + * @} + */ + +/** @defgroup I2C_transfer_direction + * @{ + */ + +#define I2C_Direction_Transmitter ((uint8_t)0x00) +#define I2C_Direction_Receiver ((uint8_t)0x01) +#define IS_I2C_DIRECTION(DIRECTION) (((DIRECTION) == I2C_Direction_Transmitter) || \ + ((DIRECTION) == I2C_Direction_Receiver)) +/** + * @} + */ + +/** @defgroup I2C_acknowledged_address + * @{ + */ + +#define I2C_AcknowledgedAddress_7bit ((uint16_t)0x4000) +#define I2C_AcknowledgedAddress_10bit ((uint16_t)0xC000) +#define IS_I2C_ACKNOWLEDGE_ADDRESS(ADDRESS) (((ADDRESS) == I2C_AcknowledgedAddress_7bit) || \ + ((ADDRESS) == I2C_AcknowledgedAddress_10bit)) +/** + * @} + */ + +/** @defgroup I2C_registers + * @{ + */ + +#define I2C_Register_CR1 ((uint8_t)0x00) +#define I2C_Register_CR2 ((uint8_t)0x04) +#define I2C_Register_OAR1 ((uint8_t)0x08) +#define I2C_Register_OAR2 ((uint8_t)0x0C) +#define I2C_Register_DR ((uint8_t)0x10) +#define I2C_Register_SR1 ((uint8_t)0x14) +#define I2C_Register_SR2 ((uint8_t)0x18) +#define I2C_Register_CCR ((uint8_t)0x1C) +#define I2C_Register_TRISE ((uint8_t)0x20) +#define IS_I2C_REGISTER(REGISTER) (((REGISTER) == I2C_Register_CR1) || \ + ((REGISTER) == I2C_Register_CR2) || \ + ((REGISTER) == I2C_Register_OAR1) || \ + ((REGISTER) == I2C_Register_OAR2) || \ + ((REGISTER) == I2C_Register_DR) || \ + ((REGISTER) == I2C_Register_SR1) || \ + ((REGISTER) == I2C_Register_SR2) || \ + ((REGISTER) == I2C_Register_CCR) || \ + ((REGISTER) == I2C_Register_TRISE)) +/** + * @} + */ + +/** @defgroup I2C_SMBus_alert_pin_level + * @{ + */ + +#define I2C_SMBusAlert_Low ((uint16_t)0x2000) +#define I2C_SMBusAlert_High ((uint16_t)0xDFFF) +#define IS_I2C_SMBUS_ALERT(ALERT) (((ALERT) == I2C_SMBusAlert_Low) || \ + ((ALERT) == I2C_SMBusAlert_High)) +/** + * @} + */ + +/** @defgroup I2C_PEC_position + * @{ + */ + +#define I2C_PECPosition_Next ((uint16_t)0x0800) +#define I2C_PECPosition_Current ((uint16_t)0xF7FF) +#define IS_I2C_PEC_POSITION(POSITION) (((POSITION) == I2C_PECPosition_Next) || \ + ((POSITION) == I2C_PECPosition_Current)) +/** + * @} + */ + +/** @defgroup I2C_NACK_position + * @{ + */ + +#define I2C_NACKPosition_Next ((uint16_t)0x0800) +#define I2C_NACKPosition_Current ((uint16_t)0xF7FF) +#define IS_I2C_NACK_POSITION(POSITION) (((POSITION) == I2C_NACKPosition_Next) || \ + ((POSITION) == I2C_NACKPosition_Current)) +/** + * @} + */ + +/** @defgroup I2C_interrupts_definition + * @{ + */ + +#define I2C_IT_BUF ((uint16_t)0x0400) +#define I2C_IT_EVT ((uint16_t)0x0200) +#define I2C_IT_ERR ((uint16_t)0x0100) +#define IS_I2C_CONFIG_IT(IT) ((((IT) & (uint16_t)0xF8FF) == 0x00) && ((IT) != 0x00)) +/** + * @} + */ + +/** @defgroup I2C_interrupts_definition + * @{ + */ + +#define I2C_IT_SMBALERT ((uint32_t)0x01008000) +#define I2C_IT_TIMEOUT ((uint32_t)0x01004000) +#define I2C_IT_PECERR ((uint32_t)0x01001000) +#define I2C_IT_OVR ((uint32_t)0x01000800) +#define I2C_IT_AF ((uint32_t)0x01000400) +#define I2C_IT_ARLO ((uint32_t)0x01000200) +#define I2C_IT_BERR ((uint32_t)0x01000100) +#define I2C_IT_TXE ((uint32_t)0x06000080) +#define I2C_IT_RXNE ((uint32_t)0x06000040) +#define I2C_IT_STOPF ((uint32_t)0x02000010) +#define I2C_IT_ADD10 ((uint32_t)0x02000008) +#define I2C_IT_BTF ((uint32_t)0x02000004) +#define I2C_IT_ADDR ((uint32_t)0x02000002) +#define I2C_IT_SB ((uint32_t)0x02000001) + +#define IS_I2C_CLEAR_IT(IT) ((((IT) & (uint16_t)0x20FF) == 0x00) && ((IT) != (uint16_t)0x00)) + +#define IS_I2C_GET_IT(IT) (((IT) == I2C_IT_SMBALERT) || ((IT) == I2C_IT_TIMEOUT) || \ + ((IT) == I2C_IT_PECERR) || ((IT) == I2C_IT_OVR) || \ + ((IT) == I2C_IT_AF) || ((IT) == I2C_IT_ARLO) || \ + ((IT) == I2C_IT_BERR) || ((IT) == I2C_IT_TXE) || \ + ((IT) == I2C_IT_RXNE) || ((IT) == I2C_IT_STOPF) || \ + ((IT) == I2C_IT_ADD10) || ((IT) == I2C_IT_BTF) || \ + ((IT) == I2C_IT_ADDR) || ((IT) == I2C_IT_SB)) +/** + * @} + */ + +/** @defgroup I2C_flags_definition + * @{ + */ + +/** + * @brief SR2 register flags + */ + +#define I2C_FLAG_DUALF ((uint32_t)0x00800000) +#define I2C_FLAG_SMBHOST ((uint32_t)0x00400000) +#define I2C_FLAG_SMBDEFAULT ((uint32_t)0x00200000) +#define I2C_FLAG_GENCALL ((uint32_t)0x00100000) +#define I2C_FLAG_TRA ((uint32_t)0x00040000) +#define I2C_FLAG_BUSY ((uint32_t)0x00020000) +#define I2C_FLAG_MSL ((uint32_t)0x00010000) + +/** + * @brief SR1 register flags + */ + +#define I2C_FLAG_SMBALERT ((uint32_t)0x10008000) +#define I2C_FLAG_TIMEOUT ((uint32_t)0x10004000) +#define I2C_FLAG_PECERR ((uint32_t)0x10001000) +#define I2C_FLAG_OVR ((uint32_t)0x10000800) +#define I2C_FLAG_AF ((uint32_t)0x10000400) +#define I2C_FLAG_ARLO ((uint32_t)0x10000200) +#define I2C_FLAG_BERR ((uint32_t)0x10000100) +#define I2C_FLAG_TXE ((uint32_t)0x10000080) +#define I2C_FLAG_RXNE ((uint32_t)0x10000040) +#define I2C_FLAG_STOPF ((uint32_t)0x10000010) +#define I2C_FLAG_ADD10 ((uint32_t)0x10000008) +#define I2C_FLAG_BTF ((uint32_t)0x10000004) +#define I2C_FLAG_ADDR ((uint32_t)0x10000002) +#define I2C_FLAG_SB ((uint32_t)0x10000001) + +#define IS_I2C_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0x20FF) == 0x00) && ((FLAG) != (uint16_t)0x00)) + +#define IS_I2C_GET_FLAG(FLAG) (((FLAG) == I2C_FLAG_DUALF) || ((FLAG) == I2C_FLAG_SMBHOST) || \ + ((FLAG) == I2C_FLAG_SMBDEFAULT) || ((FLAG) == I2C_FLAG_GENCALL) || \ + ((FLAG) == I2C_FLAG_TRA) || ((FLAG) == I2C_FLAG_BUSY) || \ + ((FLAG) == I2C_FLAG_MSL) || ((FLAG) == I2C_FLAG_SMBALERT) || \ + ((FLAG) == I2C_FLAG_TIMEOUT) || ((FLAG) == I2C_FLAG_PECERR) || \ + ((FLAG) == I2C_FLAG_OVR) || ((FLAG) == I2C_FLAG_AF) || \ + ((FLAG) == I2C_FLAG_ARLO) || ((FLAG) == I2C_FLAG_BERR) || \ + ((FLAG) == I2C_FLAG_TXE) || ((FLAG) == I2C_FLAG_RXNE) || \ + ((FLAG) == I2C_FLAG_STOPF) || ((FLAG) == I2C_FLAG_ADD10) || \ + ((FLAG) == I2C_FLAG_BTF) || ((FLAG) == I2C_FLAG_ADDR) || \ + ((FLAG) == I2C_FLAG_SB)) +/** + * @} + */ + +/** @defgroup I2C_Events + * @{ + */ + +/** + =============================================================================== + I2C Master Events (Events grouped in order of communication) + =============================================================================== + */ + +/** + * @brief Communication start + * + * After sending the START condition (I2C_GenerateSTART() function) the master + * has to wait for this event. It means that the Start condition has been correctly + * released on the I2C bus (the bus is free, no other devices is communicating). + * + */ +/* --EV5 */ +#define I2C_EVENT_MASTER_MODE_SELECT ((uint32_t)0x00030001) /* BUSY, MSL and SB flag */ + +/** + * @brief Address Acknowledge + * + * After checking on EV5 (start condition correctly released on the bus), the + * master sends the address of the slave(s) with which it will communicate + * (I2C_Send7bitAddress() function, it also determines the direction of the communication: + * Master transmitter or Receiver). Then the master has to wait that a slave acknowledges + * his address. If an acknowledge is sent on the bus, one of the following events will + * be set: + * + * 1) In case of Master Receiver (7-bit addressing): the I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED + * event is set. + * + * 2) In case of Master Transmitter (7-bit addressing): the I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED + * is set + * + * 3) In case of 10-Bit addressing mode, the master (just after generating the START + * and checking on EV5) has to send the header of 10-bit addressing mode (I2C_SendData() + * function). Then master should wait on EV9. It means that the 10-bit addressing + * header has been correctly sent on the bus. Then master should send the second part of + * the 10-bit address (LSB) using the function I2C_Send7bitAddress(). Then master + * should wait for event EV6. + * + */ + +/* --EV6 */ +#define I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED ((uint32_t)0x00070082) /* BUSY, MSL, ADDR, TXE and TRA flags */ +#define I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED ((uint32_t)0x00030002) /* BUSY, MSL and ADDR flags */ +/* --EV9 */ +#define I2C_EVENT_MASTER_MODE_ADDRESS10 ((uint32_t)0x00030008) /* BUSY, MSL and ADD10 flags */ + +/** + * @brief Communication events + * + * If a communication is established (START condition generated and slave address + * acknowledged) then the master has to check on one of the following events for + * communication procedures: + * + * 1) Master Receiver mode: The master has to wait on the event EV7 then to read + * the data received from the slave (I2C_ReceiveData() function). + * + * 2) Master Transmitter mode: The master has to send data (I2C_SendData() + * function) then to wait on event EV8 or EV8_2. + * These two events are similar: + * - EV8 means that the data has been written in the data register and is + * being shifted out. + * - EV8_2 means that the data has been physically shifted out and output + * on the bus. + * In most cases, using EV8 is sufficient for the application. + * Using EV8_2 leads to a slower communication but ensure more reliable test. + * EV8_2 is also more suitable than EV8 for testing on the last data transmission + * (before Stop condition generation). + * + * @note In case the user software does not guarantee that this event EV7 is + * managed before the current byte end of transfer, then user may check on EV7 + * and BTF flag at the same time (ie. (I2C_EVENT_MASTER_BYTE_RECEIVED | I2C_FLAG_BTF)). + * In this case the communication may be slower. + * + */ + +/* Master RECEIVER mode -----------------------------*/ +/* --EV7 */ +#define I2C_EVENT_MASTER_BYTE_RECEIVED ((uint32_t)0x00030040) /* BUSY, MSL and RXNE flags */ + +/* Master TRANSMITTER mode --------------------------*/ +/* --EV8 */ +#define I2C_EVENT_MASTER_BYTE_TRANSMITTING ((uint32_t)0x00070080) /* TRA, BUSY, MSL, TXE flags */ +/* --EV8_2 */ +#define I2C_EVENT_MASTER_BYTE_TRANSMITTED ((uint32_t)0x00070084) /* TRA, BUSY, MSL, TXE and BTF flags */ + + +/** + =============================================================================== + I2C Slave Events (Events grouped in order of communication) + =============================================================================== + */ + + +/** + * @brief Communication start events + * + * Wait on one of these events at the start of the communication. It means that + * the I2C peripheral detected a Start condition on the bus (generated by master + * device) followed by the peripheral address. The peripheral generates an ACK + * condition on the bus (if the acknowledge feature is enabled through function + * I2C_AcknowledgeConfig()) and the events listed above are set : + * + * 1) In normal case (only one address managed by the slave), when the address + * sent by the master matches the own address of the peripheral (configured by + * I2C_OwnAddress1 field) the I2C_EVENT_SLAVE_XXX_ADDRESS_MATCHED event is set + * (where XXX could be TRANSMITTER or RECEIVER). + * + * 2) In case the address sent by the master matches the second address of the + * peripheral (configured by the function I2C_OwnAddress2Config() and enabled + * by the function I2C_DualAddressCmd()) the events I2C_EVENT_SLAVE_XXX_SECONDADDRESS_MATCHED + * (where XXX could be TRANSMITTER or RECEIVER) are set. + * + * 3) In case the address sent by the master is General Call (address 0x00) and + * if the General Call is enabled for the peripheral (using function I2C_GeneralCallCmd()) + * the following event is set I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED. + * + */ + +/* --EV1 (all the events below are variants of EV1) */ +/* 1) Case of One Single Address managed by the slave */ +#define I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED ((uint32_t)0x00020002) /* BUSY and ADDR flags */ +#define I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED ((uint32_t)0x00060082) /* TRA, BUSY, TXE and ADDR flags */ + +/* 2) Case of Dual address managed by the slave */ +#define I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED ((uint32_t)0x00820000) /* DUALF and BUSY flags */ +#define I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED ((uint32_t)0x00860080) /* DUALF, TRA, BUSY and TXE flags */ + +/* 3) Case of General Call enabled for the slave */ +#define I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED ((uint32_t)0x00120000) /* GENCALL and BUSY flags */ + +/** + * @brief Communication events + * + * Wait on one of these events when EV1 has already been checked and: + * + * - Slave RECEIVER mode: + * - EV2: When the application is expecting a data byte to be received. + * - EV4: When the application is expecting the end of the communication: master + * sends a stop condition and data transmission is stopped. + * + * - Slave Transmitter mode: + * - EV3: When a byte has been transmitted by the slave and the application is expecting + * the end of the byte transmission. The two events I2C_EVENT_SLAVE_BYTE_TRANSMITTED and + * I2C_EVENT_SLAVE_BYTE_TRANSMITTING are similar. The second one can optionally be + * used when the user software doesn't guarantee the EV3 is managed before the + * current byte end of transfer. + * - EV3_2: When the master sends a NACK in order to tell slave that data transmission + * shall end (before sending the STOP condition). In this case slave has to stop sending + * data bytes and expect a Stop condition on the bus. + * + * @note In case the user software does not guarantee that the event EV2 is + * managed before the current byte end of transfer, then user may check on EV2 + * and BTF flag at the same time (ie. (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_BTF)). + * In this case the communication may be slower. + * + */ + +/* Slave RECEIVER mode --------------------------*/ +/* --EV2 */ +#define I2C_EVENT_SLAVE_BYTE_RECEIVED ((uint32_t)0x00020040) /* BUSY and RXNE flags */ +/* --EV4 */ +#define I2C_EVENT_SLAVE_STOP_DETECTED ((uint32_t)0x00000010) /* STOPF flag */ + +/* Slave TRANSMITTER mode -----------------------*/ +/* --EV3 */ +#define I2C_EVENT_SLAVE_BYTE_TRANSMITTED ((uint32_t)0x00060084) /* TRA, BUSY, TXE and BTF flags */ +#define I2C_EVENT_SLAVE_BYTE_TRANSMITTING ((uint32_t)0x00060080) /* TRA, BUSY and TXE flags */ +/* --EV3_2 */ +#define I2C_EVENT_SLAVE_ACK_FAILURE ((uint32_t)0x00000400) /* AF flag */ + +/* + =============================================================================== + End of Events Description + =============================================================================== + */ + +#define IS_I2C_EVENT(EVENT) (((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED) || \ + ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED) || \ + ((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED) || \ + ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED) || \ + ((EVENT) == I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED) || \ + ((EVENT) == I2C_EVENT_SLAVE_BYTE_RECEIVED) || \ + ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF)) || \ + ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL)) || \ + ((EVENT) == I2C_EVENT_SLAVE_BYTE_TRANSMITTED) || \ + ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF)) || \ + ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL)) || \ + ((EVENT) == I2C_EVENT_SLAVE_STOP_DETECTED) || \ + ((EVENT) == I2C_EVENT_MASTER_MODE_SELECT) || \ + ((EVENT) == I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED) || \ + ((EVENT) == I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED) || \ + ((EVENT) == I2C_EVENT_MASTER_BYTE_RECEIVED) || \ + ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTED) || \ + ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTING) || \ + ((EVENT) == I2C_EVENT_MASTER_MODE_ADDRESS10) || \ + ((EVENT) == I2C_EVENT_SLAVE_ACK_FAILURE)) +/** + * @} + */ + +/** @defgroup I2C_own_address1 + * @{ + */ + +#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x3FF) +/** + * @} + */ + +/** @defgroup I2C_clock_speed + * @{ + */ + +#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) >= 0x1) && ((SPEED) <= 400000)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/* Function used to set the I2C configuration to the default reset state *****/ +void I2C_DeInit(I2C_TypeDef* I2Cx); + +/* Initialization and Configuration functions *********************************/ +void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct); +void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct); +void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint8_t Address); +void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert); +void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle); +void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction); + +/* Data transfers functions ***************************************************/ +void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data); +uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx); +void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition); + +/* PEC management functions ***************************************************/ +void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition); +void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState); +uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx); + +/* DMA transfers management functions *****************************************/ +void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState); +void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); + + +/* Interrupts, events and flags management functions **************************/ +uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register); +void I2C_ITConfig(I2C_TypeDef* I2Cx, uint16_t I2C_IT, FunctionalState NewState); + +/* + + =============================================================================== + I2C State Monitoring Functions + =============================================================================== + This I2C driver provides three different ways for I2C state monitoring + depending on the application requirements and constraints: + + + 1. Basic state monitoring (Using I2C_CheckEvent() function) + ----------------------------------------------------------- + It compares the status registers (SR1 and SR2) content to a given event + (can be the combination of one or more flags). + It returns SUCCESS if the current status includes the given flags + and returns ERROR if one or more flags are missing in the current status. + + - When to use + - This function is suitable for most applications as well as for startup + activity since the events are fully described in the product reference + manual (RM0038). + - It is also suitable for users who need to define their own events. + + - Limitations + - If an error occurs (ie. error flags are set besides to the monitored + flags), the I2C_CheckEvent() function may return SUCCESS despite + the communication hold or corrupted real state. + In this case, it is advised to use error interrupts to monitor + the error events and handle them in the interrupt IRQ handler. + + Note + For error management, it is advised to use the following functions: + - I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR). + - I2Cx_ER_IRQHandler() which is called when the error interrupt occurs. + Where x is the peripheral instance (I2C1, I2C2 ...) + - I2C_GetFlagStatus() or I2C_GetITStatus() to be called into the + I2Cx_ER_IRQHandler() function in order to determine which error occurred. + - I2C_ClearFlag() or I2C_ClearITPendingBit() and/or I2C_SoftwareResetCmd() + and/or I2C_GenerateStop() in order to clear the error flag and source + and return to correct communciation status. + + + 2. Advanced state monitoring (Using the function I2C_GetLastEvent()) + -------------------------------------------------------------------- + Using the function I2C_GetLastEvent() which returns the image of both status + registers in a single word (uint32_t) (Status Register 2 value is shifted left + by 16 bits and concatenated to Status Register 1). + + - When to use + - This function is suitable for the same applications above but it + allows to overcome the mentioned limitation of I2C_GetFlagStatus() + function. + - The returned value could be compared to events already defined in + the library (stm32l1xx_i2c.h) or to custom values defined by user. + This function is suitable when multiple flags are monitored at the + same time. + - At the opposite of I2C_CheckEvent() function, this function allows + user to choose when an event is accepted (when all events flags are + set and no other flags are set or just when the needed flags are set + like I2C_CheckEvent() function. + + - Limitations + - User may need to define his own events. + - Same remark concerning the error management is applicable for this + function if user decides to check only regular communication flags + (and ignores error flags). + + + 3. Flag-based state monitoring (Using the function I2C_GetFlagStatus()) + ----------------------------------------------------------------------- + + Using the function I2C_GetFlagStatus() which simply returns the status of + one single flag (ie. I2C_FLAG_RXNE ...). + + - When to use + - This function could be used for specific applications or in debug + phase. + - It is suitable when only one flag checking is needed (most I2C + events are monitored through multiple flags). + - Limitations: + - When calling this function, the Status register is accessed. + Some flags are cleared when the status register is accessed. + So checking the status of one Flag, may clear other ones. + - Function may need to be called twice or more in order to monitor + one single event. + + For detailed description of Events, please refer to section I2C_Events in + stm32l1xx_i2c.h file. + +*/ + +/* + =============================================================================== + 1. Basic state monitoring + =============================================================================== + */ +ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT); +/* + =============================================================================== + 2. Advanced state monitoring + =============================================================================== + */ +uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx); +/* + =============================================================================== + 3. Flag-based state monitoring + =============================================================================== + */ +FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG); + + +void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG); +ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT); +void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32L1xx_I2C_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_opamp.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_opamp.h new file mode 100644 index 0000000..c23135b --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_opamp.h @@ -0,0 +1,187 @@ +/** + ****************************************************************************** + * @file stm32l1xx_opamp.h + * @author MCD Application Team + * @version V1.1.1 + * @date 05-March-2012 + * @brief This file contains all the functions prototypes for the operational + * amplifiers (opamp) firmware library. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_OPAMP_H +#define __STM32L1xx_OPAMP_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup OPAMP + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup OPAMP_Exported_Constants + * @{ + */ + +/** @defgroup OPAMP_Selection + * @{ + */ + +#define OPAMP_Selection_OPAMP1 OPAMP_CSR_OPA1PD +#define OPAMP_Selection_OPAMP2 OPAMP_CSR_OPA2PD +#define OPAMP_Selection_OPAMP3 OPAMP_CSR_OPA3PD + +#define IS_OPAMP_ALL_PERIPH(PERIPH) (((PERIPH) == OPAMP_Selection_OPAMP1) || \ + ((PERIPH) == OPAMP_Selection_OPAMP2) || \ + ((PERIPH) == OPAMP_Selection_OPAMP3)) + +/** + * @} + */ + +/** @defgroup OPAMP_Switches + * @{ + */ + +/* OPAMP1 Switches */ +#define OPAMP_OPAMP1Switch3 OPAMP_CSR_S3SEL1 /*!< OPAMP1 Switch 3 */ +#define OPAMP_OPAMP1Switch4 OPAMP_CSR_S4SEL1 /*!< OPAMP1 Switch 4 */ +#define OPAMP_OPAMP1Switch5 OPAMP_CSR_S5SEL1 /*!< OPAMP1 Switch 5 */ +#define OPAMP_OPAMP1Switch6 OPAMP_CSR_S6SEL1 /*!< OPAMP1 Switch 6 */ +#define OPAMP_OPAMP1SwitchANA OPAMP_CSR_ANAWSEL1 /*!< OPAMP1 Switch ANA */ + +/* OPAMP2 Switches */ +#define OPAMP_OPAMP2Switch3 OPAMP_CSR_S3SEL2 /*!< OPAMP2 Switch 3 */ +#define OPAMP_OPAMP2Switch4 OPAMP_CSR_S4SEL2 /*!< OPAMP2 Switch 4 */ +#define OPAMP_OPAMP2Switch5 OPAMP_CSR_S5SEL2 /*!< OPAMP2 Switch 5 */ +#define OPAMP_OPAMP2Switch6 OPAMP_CSR_S6SEL2 /*!< OPAMP2 Switch 6 */ +#define OPAMP_OPAMP2Switch7 OPAMP_CSR_S7SEL2 /*!< OPAMP2 Switch 7 */ +#define OPAMP_OPAMP2SwitchANA OPAMP_CSR_ANAWSEL2 /*!< OPAMP2 Switch ANA */ + +/* OPAMP3 Switches */ +#define OPAMP_OPAMP3Switch3 OPAMP_CSR_S3SEL3 /*!< OPAMP3 Switch 3 */ +#define OPAMP_OPAMP3Switch4 OPAMP_CSR_S4SEL3 /*!< OPAMP3 Switch 4 */ +#define OPAMP_OPAMP3Switch5 OPAMP_CSR_S5SEL3 /*!< OPAMP3 Switch 5 */ +#define OPAMP_OPAMP3Switch6 OPAMP_CSR_S6SEL3 /*!< OPAMP3 Switch 6 */ +#define OPAMP_OPAMP3SwitchANA OPAMP_CSR_ANAWSEL3 /*!< OPAMP3 Switch ANA */ + +#define IS_OPAMP_SWITCH(SWITCH) ((((SWITCH) & (uint32_t)0xF0E1E1E1) == 0x00) && ((SWITCH) != 0x00)) + +/** + * @} + */ + +/** @defgroup OPAMP_Trimming + * @{ + */ + +#define OPAMP_Trimming_Factory ((uint32_t)0x00000000) /*!< Factory trimming */ +#define OPAMP_Trimming_User OPAMP_OTR_OT_USER /*!< User trimming */ + +#define IS_OPAMP_TRIMMING(TRIMMING) (((TRIMMING) == OPAMP_Trimming_Factory) || \ + ((TRIMMING) == OPAMP_Trimming_User)) + +/** + * @} + */ + +/** @defgroup OPAMP_Input + * @{ + */ + +#define OPAMP_Input_NMOS OPAMP_CSR_OPA1CAL_H /*!< NMOS input */ +#define OPAMP_Input_PMOS OPAMP_CSR_OPA1CAL_L /*!< PMOS input */ + +#define IS_OPAMP_INPUT(INPUT) (((INPUT) == OPAMP_Input_NMOS) || \ + ((INPUT) == OPAMP_Input_PMOS)) + +/** + * @} + */ + +/** @defgroup OPAMP_TrimValue + * @{ + */ + +#define IS_OPAMP_TRIMMINGVALUE(VALUE) ((VALUE) <= 0x0000001F) /*!< Trimming value */ + +/** + * @} + */ + +/** @defgroup OPAMP_PowerRange + * @{ + */ + +#define OPAMP_PowerRange_Low ((uint32_t)0x00000000) /*!< Low power range is selected (VDDA is lower than 2.4V) */ +#define OPAMP_PowerRange_High OPAMP_CSR_AOP_RANGE /*!< High power range is selected (VDDA is higher than 2.4V) */ + +#define IS_OPAMP_RANGE(RANGE) (((RANGE) == OPAMP_PowerRange_Low) || \ + ((RANGE) == OPAMP_PowerRange_High)) + +/** + * @} + */ +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ +/* Initialization and Configuration functions *********************************/ +void OPAMP_DeInit(void); +void OPAMP_SwitchCmd(uint32_t OPAMP_OPAMPxSwitchy, FunctionalState NewState); +void OPAMP_Cmd(uint32_t OPAMP_Selection, FunctionalState NewState); +void OPAMP_LowPowerCmd(uint32_t OPAMP_Selection, FunctionalState NewState); +void OPAMP_PowerRangeSelect(uint32_t OPAMP_PowerRange); + +/* Calibration functions ******************************************************/ +void OPAMP_OffsetTrimmingModeSelect(uint32_t OPAMP_Trimming); +void OPAMP_OffsetTrimConfig(uint32_t OPAMP_Selection, uint32_t OPAMP_Input, uint32_t OPAMP_TrimValue); +void OPAMP_OffsetTrimLowPowerConfig(uint32_t OPAMP_Selection, uint32_t OPAMP_Input, uint32_t OPAMP_TrimValue); +FlagStatus OPAMP_GetFlagStatus(uint32_t OPAMP_Selection); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32L1xx_OPAMP_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_pwr.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_pwr.h new file mode 100644 index 0000000..e6f28a6 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_pwr.h @@ -0,0 +1,213 @@ +/** + ****************************************************************************** + * @file stm32l1xx_pwr.h + * @author MCD Application Team + * @version V1.1.1 + * @date 05-March-2012 + * @brief This file contains all the functions prototypes for the PWR firmware + * library. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_PWR_H +#define __STM32L1xx_PWR_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup PWR + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup PWR_Exported_Constants + * @{ + */ + +/** @defgroup PWR_PVD_detection_level + * @{ + */ + +#define PWR_PVDLevel_0 PWR_CR_PLS_LEV0 +#define PWR_PVDLevel_1 PWR_CR_PLS_LEV1 +#define PWR_PVDLevel_2 PWR_CR_PLS_LEV2 +#define PWR_PVDLevel_3 PWR_CR_PLS_LEV3 +#define PWR_PVDLevel_4 PWR_CR_PLS_LEV4 +#define PWR_PVDLevel_5 PWR_CR_PLS_LEV5 +#define PWR_PVDLevel_6 PWR_CR_PLS_LEV6 +#define PWR_PVDLevel_7 PWR_CR_PLS_LEV7 /* External input analog voltage + (Compare internally to VREFINT) */ +#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_0) || ((LEVEL) == PWR_PVDLevel_1)|| \ + ((LEVEL) == PWR_PVDLevel_2) || ((LEVEL) == PWR_PVDLevel_3)|| \ + ((LEVEL) == PWR_PVDLevel_4) || ((LEVEL) == PWR_PVDLevel_5)|| \ + ((LEVEL) == PWR_PVDLevel_6) || ((LEVEL) == PWR_PVDLevel_7)) +/** + * @} + */ + +/** @defgroup PWR_WakeUp_Pins + * @{ + */ + +#define PWR_WakeUpPin_1 ((uint32_t)0x00000000) +#define PWR_WakeUpPin_2 ((uint32_t)0x00000004) +#define PWR_WakeUpPin_3 ((uint32_t)0x00000008) +#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WakeUpPin_1) || \ + ((PIN) == PWR_WakeUpPin_2) || \ + ((PIN) == PWR_WakeUpPin_3)) +/** + * @} + */ + + +/** @defgroup PWR_Voltage_Scaling_Ranges + * @{ + */ + +#define PWR_VoltageScaling_Range1 PWR_CR_VOS_0 +#define PWR_VoltageScaling_Range2 PWR_CR_VOS_1 +#define PWR_VoltageScaling_Range3 PWR_CR_VOS + +#define IS_PWR_VOLTAGE_SCALING_RANGE(RANGE) (((RANGE) == PWR_VoltageScaling_Range1) || \ + ((RANGE) == PWR_VoltageScaling_Range2) || \ + ((RANGE) == PWR_VoltageScaling_Range3)) +/** + * @} + */ + +/** @defgroup PWR_Regulator_state_is_Sleep_STOP_mode + * @{ + */ + +#define PWR_Regulator_ON ((uint32_t)0x00000000) +#define PWR_Regulator_LowPower PWR_CR_LPSDSR +#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_Regulator_ON) || \ + ((REGULATOR) == PWR_Regulator_LowPower)) +/** + * @} + */ + +/** @defgroup PWR_SLEEP_mode_entry + * @{ + */ + +#define PWR_SLEEPEntry_WFI ((uint8_t)0x01) +#define PWR_SLEEPEntry_WFE ((uint8_t)0x02) +#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPEntry_WFI) || ((ENTRY) == PWR_SLEEPEntry_WFE)) + +/** + * @} + */ + +/** @defgroup PWR_STOP_mode_entry + * @{ + */ + +#define PWR_STOPEntry_WFI ((uint8_t)0x01) +#define PWR_STOPEntry_WFE ((uint8_t)0x02) +#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE)) + +/** + * @} + */ + +/** @defgroup PWR_Flag + * @{ + */ + +#define PWR_FLAG_WU PWR_CSR_WUF +#define PWR_FLAG_SB PWR_CSR_SBF +#define PWR_FLAG_PVDO PWR_CSR_PVDO +#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF +#define PWR_FLAG_VOS PWR_CSR_VOSF +#define PWR_FLAG_REGLP PWR_CSR_REGLPF + +#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \ + ((FLAG) == PWR_FLAG_PVDO) || ((FLAG) == PWR_FLAG_VREFINTRDY) || \ + ((FLAG) == PWR_FLAG_VOS) || ((FLAG) == PWR_FLAG_REGLP)) + +#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/* Function used to set the PWR configuration to the default reset state ******/ +void PWR_DeInit(void); + +/* RTC Domain Access function *************************************************/ +void PWR_RTCAccessCmd(FunctionalState NewState); + +/* PVD configuration functions ************************************************/ +void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel); +void PWR_PVDCmd(FunctionalState NewState); + +/* WakeUp pins configuration functions ****************************************/ +void PWR_WakeUpPinCmd(uint32_t PWR_WakeUpPin, FunctionalState NewState); + +/* Ultra Low Power mode configuration functions *******************************/ +void PWR_FastWakeUpCmd(FunctionalState NewState); +void PWR_UltraLowPowerCmd(FunctionalState NewState); + +/* Voltage Scaling configuration functions ************************************/ +void PWR_VoltageScalingConfig(uint32_t PWR_VoltageScaling); + +/* Low Power modes configuration functions ************************************/ +void PWR_EnterLowPowerRunMode(FunctionalState NewState); +void PWR_EnterSleepMode(uint32_t PWR_Regulator, uint8_t PWR_SLEEPEntry); +void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry); +void PWR_EnterSTANDBYMode(void); + +/* Flags management functions *************************************************/ +FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG); +void PWR_ClearFlag(uint32_t PWR_FLAG); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_PWR_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_rtc.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_rtc.h new file mode 100644 index 0000000..a63d780 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_rtc.h @@ -0,0 +1,896 @@ +/** + ****************************************************************************** + * @file stm32l1xx_rtc.h + * @author MCD Application Team + * @version V1.1.1 + * @date 05-March-2012 + * @brief This file contains all the functions prototypes for the RTC firmware + * library. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_RTC_H +#define __STM32L1xx_RTC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup RTC + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief RTC Init structures definition + */ +typedef struct +{ + uint32_t RTC_HourFormat; /*!< Specifies the RTC Hour Format. + This parameter can be a value of @ref RTC_Hour_Formats */ + + uint32_t RTC_AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value. + This parameter must be set to a value lower than 0x7F */ + + uint32_t RTC_SynchPrediv; /*!< Specifies the RTC Synchronous Predivider value. + This parameter must be set to a value lower than 0x7FFF */ +}RTC_InitTypeDef; + +/** + * @brief RTC Time structure definition + */ +typedef struct +{ + uint8_t RTC_Hours; /*!< Specifies the RTC Time Hour. + This parameter must be set to a value in the 0-12 range + if the RTC_HourFormat_12 is selected or 0-23 range if + the RTC_HourFormat_24 is selected. */ + + uint8_t RTC_Minutes; /*!< Specifies the RTC Time Minutes. + This parameter must be set to a value in the 0-59 range. */ + + uint8_t RTC_Seconds; /*!< Specifies the RTC Time Seconds. + This parameter must be set to a value in the 0-59 range. */ + + uint8_t RTC_H12; /*!< Specifies the RTC AM/PM Time. + This parameter can be a value of @ref RTC_AM_PM_Definitions */ +}RTC_TimeTypeDef; + +/** + * @brief RTC Date structure definition + */ +typedef struct +{ + uint8_t RTC_WeekDay; /*!< Specifies the RTC Date WeekDay. + This parameter can be a value of @ref RTC_WeekDay_Definitions */ + + uint8_t RTC_Month; /*!< Specifies the RTC Date Month (in BCD format). + This parameter can be a value of @ref RTC_Month_Date_Definitions */ + + uint8_t RTC_Date; /*!< Specifies the RTC Date. + This parameter must be set to a value in the 1-31 range. */ + + uint8_t RTC_Year; /*!< Specifies the RTC Date Year. + This parameter must be set to a value in the 0-99 range. */ +}RTC_DateTypeDef; + +/** + * @brief RTC Alarm structure definition + */ +typedef struct +{ + RTC_TimeTypeDef RTC_AlarmTime; /*!< Specifies the RTC Alarm Time members. */ + + uint32_t RTC_AlarmMask; /*!< Specifies the RTC Alarm Masks. + This parameter can be a value of @ref RTC_AlarmMask_Definitions */ + + uint32_t RTC_AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on Date or WeekDay. + This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */ + + uint8_t RTC_AlarmDateWeekDay; /*!< Specifies the RTC Alarm Date/WeekDay. + If the Alarm Date is selected, this parameter + must be set to a value in the 1-31 range. + If the Alarm WeekDay is selected, this + parameter can be a value of @ref RTC_WeekDay_Definitions */ +}RTC_AlarmTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup RTC_Exported_Constants + * @{ + */ + + +/** @defgroup RTC_Hour_Formats + * @{ + */ +#define RTC_HourFormat_24 ((uint32_t)0x00000000) +#define RTC_HourFormat_12 ((uint32_t)0x00000040) +#define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HourFormat_12) || \ + ((FORMAT) == RTC_HourFormat_24)) +/** + * @} + */ + +/** @defgroup RTC_Asynchronous_Predivider + * @{ + */ +#define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= 0x7F) + +/** + * @} + */ + + +/** @defgroup RTC_Synchronous_Predivider + * @{ + */ +#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= 0x7FFF) + +/** + * @} + */ + +/** @defgroup RTC_Time_Definitions + * @{ + */ +#define IS_RTC_HOUR12(HOUR) (((HOUR) > 0) && ((HOUR) <= 12)) +#define IS_RTC_HOUR24(HOUR) ((HOUR) <= 23) +#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= 59) +#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= 59) + +/** + * @} + */ + +/** @defgroup RTC_AM_PM_Definitions + * @{ + */ +#define RTC_H12_AM ((uint8_t)0x00) +#define RTC_H12_PM ((uint8_t)0x40) +#define IS_RTC_H12(PM) (((PM) == RTC_H12_AM) || ((PM) == RTC_H12_PM)) + +/** + * @} + */ + +/** @defgroup RTC_Year_Date_Definitions + * @{ + */ +#define IS_RTC_YEAR(YEAR) ((YEAR) <= 99) + +/** + * @} + */ + +/** @defgroup RTC_Month_Date_Definitions + * @{ + */ + +/* Coded in BCD format */ +#define RTC_Month_January ((uint8_t)0x01) +#define RTC_Month_February ((uint8_t)0x02) +#define RTC_Month_March ((uint8_t)0x03) +#define RTC_Month_April ((uint8_t)0x04) +#define RTC_Month_May ((uint8_t)0x05) +#define RTC_Month_June ((uint8_t)0x06) +#define RTC_Month_July ((uint8_t)0x07) +#define RTC_Month_August ((uint8_t)0x08) +#define RTC_Month_September ((uint8_t)0x09) +#define RTC_Month_October ((uint8_t)0x10) +#define RTC_Month_November ((uint8_t)0x11) +#define RTC_Month_December ((uint8_t)0x12) +#define IS_RTC_MONTH(MONTH) (((MONTH) >= 1) && ((MONTH) <= 12)) +#define IS_RTC_DATE(DATE) (((DATE) >= 1) && ((DATE) <= 31)) + +/** + * @} + */ + +/** @defgroup RTC_WeekDay_Definitions + * @{ + */ + +#define RTC_Weekday_Monday ((uint8_t)0x01) +#define RTC_Weekday_Tuesday ((uint8_t)0x02) +#define RTC_Weekday_Wednesday ((uint8_t)0x03) +#define RTC_Weekday_Thursday ((uint8_t)0x04) +#define RTC_Weekday_Friday ((uint8_t)0x05) +#define RTC_Weekday_Saturday ((uint8_t)0x06) +#define RTC_Weekday_Sunday ((uint8_t)0x07) +#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_Weekday_Monday) || \ + ((WEEKDAY) == RTC_Weekday_Tuesday) || \ + ((WEEKDAY) == RTC_Weekday_Wednesday) || \ + ((WEEKDAY) == RTC_Weekday_Thursday) || \ + ((WEEKDAY) == RTC_Weekday_Friday) || \ + ((WEEKDAY) == RTC_Weekday_Saturday) || \ + ((WEEKDAY) == RTC_Weekday_Sunday)) +/** + * @} + */ + + +/** @defgroup RTC_Alarm_Definitions + * @{ + */ +#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) > 0) && ((DATE) <= 31)) +#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_Weekday_Monday) || \ + ((WEEKDAY) == RTC_Weekday_Tuesday) || \ + ((WEEKDAY) == RTC_Weekday_Wednesday) || \ + ((WEEKDAY) == RTC_Weekday_Thursday) || \ + ((WEEKDAY) == RTC_Weekday_Friday) || \ + ((WEEKDAY) == RTC_Weekday_Saturday) || \ + ((WEEKDAY) == RTC_Weekday_Sunday)) + +/** + * @} + */ + + +/** @defgroup RTC_AlarmDateWeekDay_Definitions + * @{ + */ +#define RTC_AlarmDateWeekDaySel_Date ((uint32_t)0x00000000) +#define RTC_AlarmDateWeekDaySel_WeekDay ((uint32_t)0x40000000) + +#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_AlarmDateWeekDaySel_Date) || \ + ((SEL) == RTC_AlarmDateWeekDaySel_WeekDay)) + +/** + * @} + */ + + +/** @defgroup RTC_AlarmMask_Definitions + * @{ + */ +#define RTC_AlarmMask_None ((uint32_t)0x00000000) +#define RTC_AlarmMask_DateWeekDay ((uint32_t)0x80000000) +#define RTC_AlarmMask_Hours ((uint32_t)0x00800000) +#define RTC_AlarmMask_Minutes ((uint32_t)0x00008000) +#define RTC_AlarmMask_Seconds ((uint32_t)0x00000080) +#define RTC_AlarmMask_All ((uint32_t)0x80808080) +#define IS_ALARM_MASK(MASK) (((MASK) & 0x7F7F7F7F) == (uint32_t)RESET) + +/** + * @} + */ + +/** @defgroup RTC_Alarms_Definitions + * @{ + */ +#define RTC_Alarm_A ((uint32_t)0x00000100) +#define RTC_Alarm_B ((uint32_t)0x00000200) +#define IS_RTC_ALARM(ALARM) (((ALARM) == RTC_Alarm_A) || ((ALARM) == RTC_Alarm_B)) +#define IS_RTC_CMD_ALARM(ALARM) (((ALARM) & (RTC_Alarm_A | RTC_Alarm_B)) != (uint32_t)RESET) + +/** + * @} + */ + +/** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions + * @{ + */ +#define RTC_AlarmSubSecondMask_All ((uint32_t)0x00000000) /*!< All Alarm SS fields are masked. + There is no comparison on sub seconds + for Alarm */ +#define RTC_AlarmSubSecondMask_SS14_1 ((uint32_t)0x01000000) /*!< SS[14:1] are don't care in Alarm + comparison. Only SS[0] is compared. */ +#define RTC_AlarmSubSecondMask_SS14_2 ((uint32_t)0x02000000) /*!< SS[14:2] are don't care in Alarm + comparison. Only SS[1:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_3 ((uint32_t)0x03000000) /*!< SS[14:3] are don't care in Alarm + comparison. Only SS[2:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_4 ((uint32_t)0x04000000) /*!< SS[14:4] are don't care in Alarm + comparison. Only SS[3:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_5 ((uint32_t)0x05000000) /*!< SS[14:5] are don't care in Alarm + comparison. Only SS[4:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_6 ((uint32_t)0x06000000) /*!< SS[14:6] are don't care in Alarm + comparison. Only SS[5:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_7 ((uint32_t)0x07000000) /*!< SS[14:7] are don't care in Alarm + comparison. Only SS[6:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_8 ((uint32_t)0x08000000) /*!< SS[14:8] are don't care in Alarm + comparison. Only SS[7:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_9 ((uint32_t)0x09000000) /*!< SS[14:9] are don't care in Alarm + comparison. Only SS[8:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_10 ((uint32_t)0x0A000000) /*!< SS[14:10] are don't care in Alarm + comparison. Only SS[9:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_11 ((uint32_t)0x0B000000) /*!< SS[14:11] are don't care in Alarm + comparison. Only SS[10:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_12 ((uint32_t)0x0C000000) /*!< SS[14:12] are don't care in Alarm + comparison.Only SS[11:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14_13 ((uint32_t)0x0D000000) /*!< SS[14:13] are don't care in Alarm + comparison. Only SS[12:0] are compared */ +#define RTC_AlarmSubSecondMask_SS14 ((uint32_t)0x0E000000) /*!< SS[14] is don't care in Alarm + comparison.Only SS[13:0] are compared */ +#define RTC_AlarmSubSecondMask_None ((uint32_t)0x0F000000) /*!< SS[14:0] are compared and must match + to activate alarm. */ +#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK) (((MASK) == RTC_AlarmSubSecondMask_All) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_1) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_2) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_3) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_4) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_5) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_6) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_7) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_8) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_9) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_10) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_11) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_12) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14_13) || \ + ((MASK) == RTC_AlarmSubSecondMask_SS14) || \ + ((MASK) == RTC_AlarmSubSecondMask_None)) +/** + * @} + */ + +/** @defgroup RTC_Alarm_Sub_Seconds_Value + * @{ + */ + +#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= 0x00007FFF) + +/** + * @} + */ + +/** @defgroup RTC_Wakeup_Timer_Definitions + * @{ + */ +#define RTC_WakeUpClock_RTCCLK_Div16 ((uint32_t)0x00000000) +#define RTC_WakeUpClock_RTCCLK_Div8 ((uint32_t)0x00000001) +#define RTC_WakeUpClock_RTCCLK_Div4 ((uint32_t)0x00000002) +#define RTC_WakeUpClock_RTCCLK_Div2 ((uint32_t)0x00000003) +#define RTC_WakeUpClock_CK_SPRE_16bits ((uint32_t)0x00000004) +#define RTC_WakeUpClock_CK_SPRE_17bits ((uint32_t)0x00000006) +#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WakeUpClock_RTCCLK_Div16) || \ + ((CLOCK) == RTC_WakeUpClock_RTCCLK_Div8) || \ + ((CLOCK) == RTC_WakeUpClock_RTCCLK_Div4) || \ + ((CLOCK) == RTC_WakeUpClock_RTCCLK_Div2) || \ + ((CLOCK) == RTC_WakeUpClock_CK_SPRE_16bits) || \ + ((CLOCK) == RTC_WakeUpClock_CK_SPRE_17bits)) +#define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFF) +/** + * @} + */ + +/** @defgroup RTC_Time_Stamp_Edges_definitions + * @{ + */ +#define RTC_TimeStampEdge_Rising ((uint32_t)0x00000000) +#define RTC_TimeStampEdge_Falling ((uint32_t)0x00000008) +#define IS_RTC_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TimeStampEdge_Rising) || \ + ((EDGE) == RTC_TimeStampEdge_Falling)) +/** + * @} + */ + +/** @defgroup RTC_Output_selection_Definitions + * @{ + */ +#define RTC_Output_Disable ((uint32_t)0x00000000) +#define RTC_Output_AlarmA ((uint32_t)0x00200000) +#define RTC_Output_AlarmB ((uint32_t)0x00400000) +#define RTC_Output_WakeUp ((uint32_t)0x00600000) + +#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_Output_Disable) || \ + ((OUTPUT) == RTC_Output_AlarmA) || \ + ((OUTPUT) == RTC_Output_AlarmB) || \ + ((OUTPUT) == RTC_Output_WakeUp)) + +/** + * @} + */ + +/** @defgroup RTC_Output_Polarity_Definitions + * @{ + */ +#define RTC_OutputPolarity_High ((uint32_t)0x00000000) +#define RTC_OutputPolarity_Low ((uint32_t)0x00100000) +#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OutputPolarity_High) || \ + ((POL) == RTC_OutputPolarity_Low)) +/** + * @} + */ + +/** @defgroup RTC_Coarse_Calibration_Definitions + * @{ + */ +#define RTC_CalibSign_Positive ((uint32_t)0x00000000) +#define RTC_CalibSign_Negative ((uint32_t)0x00000080) +#define IS_RTC_CALIB_SIGN(SIGN) (((SIGN) == RTC_CalibSign_Positive) || \ + ((SIGN) == RTC_CalibSign_Negative)) +#define IS_RTC_CALIB_VALUE(VALUE) ((VALUE) < 0x20) + +/** + * @} + */ + + /** @defgroup RTC_Calib_Output_selection_Definitions + * @{ + */ +#define RTC_CalibOutput_512Hz ((uint32_t)0x00000000) +#define RTC_CalibOutput_1Hz ((uint32_t)0x00080000) +#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CalibOutput_512Hz) || \ + ((OUTPUT) == RTC_CalibOutput_1Hz)) +/** + * @} + */ + +/** @defgroup RTC_Smooth_calib_period_Definitions + * @{ + */ +#define RTC_SmoothCalibPeriod_32sec ((uint32_t)0x00000000) /*!< if RTCCLK = 32768 Hz, Smooth calibation + period is 32s, else 2exp20 RTCCLK seconds */ +#define RTC_SmoothCalibPeriod_16sec ((uint32_t)0x00002000) /*!< if RTCCLK = 32768 Hz, Smooth calibation + period is 16s, else 2exp19 RTCCLK seconds */ +#define RTC_SmoothCalibPeriod_8sec ((uint32_t)0x00004000) /*!< if RTCCLK = 32768 Hz, Smooth calibation + period is 8s, else 2exp18 RTCCLK seconds */ +#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SmoothCalibPeriod_32sec) || \ + ((PERIOD) == RTC_SmoothCalibPeriod_16sec) || \ + ((PERIOD) == RTC_SmoothCalibPeriod_8sec)) + +/** + * @} + */ + +/** @defgroup RTC_Smooth_calib_Plus_pulses_Definitions + * @{ + */ +#define RTC_SmoothCalibPlusPulses_Set ((uint32_t)0x00008000) /*!< The number of RTCCLK pulses added + during a X -second window = Y - CALM[8:0]. + with Y = 512, 256, 128 when X = 32, 16, 8 */ +#define RTC_SmoothCalibPlusPulses_Reset ((uint32_t)0x00000000) /*!< The number of RTCCLK pulses subbstited + during a 32-second window = CALM[8:0]. */ +#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SmoothCalibPlusPulses_Set) || \ + ((PLUS) == RTC_SmoothCalibPlusPulses_Reset)) + +/** + * @} + */ + +/** @defgroup RTC_Smooth_calib_Minus_pulses_Definitions + * @{ + */ +#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FF) + +/** + * @} + */ + +/** @defgroup RTC_DayLightSaving_Definitions + * @{ + */ +#define RTC_DayLightSaving_SUB1H ((uint32_t)0x00020000) +#define RTC_DayLightSaving_ADD1H ((uint32_t)0x00010000) +#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DayLightSaving_SUB1H) || \ + ((SAVE) == RTC_DayLightSaving_ADD1H)) + +#define RTC_StoreOperation_Reset ((uint32_t)0x00000000) +#define RTC_StoreOperation_Set ((uint32_t)0x00040000) +#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_StoreOperation_Reset) || \ + ((OPERATION) == RTC_StoreOperation_Set)) +/** + * @} + */ + +/** @defgroup RTC_Tamper_Trigger_Definitions + * @{ + */ +#define RTC_TamperTrigger_RisingEdge ((uint32_t)0x00000000) +#define RTC_TamperTrigger_FallingEdge ((uint32_t)0x00000001) +#define RTC_TamperTrigger_LowLevel ((uint32_t)0x00000000) +#define RTC_TamperTrigger_HighLevel ((uint32_t)0x00000001) +#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TamperTrigger_RisingEdge) || \ + ((TRIGGER) == RTC_TamperTrigger_FallingEdge) || \ + ((TRIGGER) == RTC_TamperTrigger_LowLevel) || \ + ((TRIGGER) == RTC_TamperTrigger_HighLevel)) + +/** + * @} + */ + +/** @defgroup RTC_Tamper_Filter_Definitions + * @{ + */ +#define RTC_TamperFilter_Disable ((uint32_t)0x00000000) /*!< Tamper filter is disabled */ + +#define RTC_TamperFilter_2Sample ((uint32_t)0x00000800) /*!< Tamper is activated after 2 + consecutive samples at the active level */ +#define RTC_TamperFilter_4Sample ((uint32_t)0x00001000) /*!< Tamper is activated after 4 + consecutive samples at the active level */ +#define RTC_TamperFilter_8Sample ((uint32_t)0x00001800) /*!< Tamper is activated after 8 + consecutive samples at the active leve. */ +#define IS_RTC_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TamperFilter_Disable) || \ + ((FILTER) == RTC_TamperFilter_2Sample) || \ + ((FILTER) == RTC_TamperFilter_4Sample) || \ + ((FILTER) == RTC_TamperFilter_8Sample)) +/** + * @} + */ + +/** @defgroup RTC_Tamper_Sampling_Frequencies_Definitions + * @{ + */ +#define RTC_TamperSamplingFreq_RTCCLK_Div32768 ((uint32_t)0x00000000) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 32768 */ +#define RTC_TamperSamplingFreq_RTCCLK_Div16384 ((uint32_t)0x000000100) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 16384 */ +#define RTC_TamperSamplingFreq_RTCCLK_Div8192 ((uint32_t)0x00000200) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 8192 */ +#define RTC_TamperSamplingFreq_RTCCLK_Div4096 ((uint32_t)0x00000300) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 4096 */ +#define RTC_TamperSamplingFreq_RTCCLK_Div2048 ((uint32_t)0x00000400) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 2048 */ +#define RTC_TamperSamplingFreq_RTCCLK_Div1024 ((uint32_t)0x00000500) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 1024 */ +#define RTC_TamperSamplingFreq_RTCCLK_Div512 ((uint32_t)0x00000600) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 512 */ +#define RTC_TamperSamplingFreq_RTCCLK_Div256 ((uint32_t)0x00000700) /*!< Each of the tamper inputs are sampled + with a frequency = RTCCLK / 256 */ +#define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div32768) || \ + ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div16384) || \ + ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div8192) || \ + ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div4096) || \ + ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div2048) || \ + ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div1024) || \ + ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div512) || \ + ((FREQ) ==RTC_TamperSamplingFreq_RTCCLK_Div256)) + +/** + * @} + */ + + /** @defgroup RTC_Tamper_Pin_Precharge_Duration_Definitions + * @{ + */ +#define RTC_TamperPrechargeDuration_1RTCCLK ((uint32_t)0x00000000) /*!< Tamper pins are pre-charged before + sampling during 1 RTCCLK cycle */ +#define RTC_TamperPrechargeDuration_2RTCCLK ((uint32_t)0x00002000) /*!< Tamper pins are pre-charged before + sampling during 2 RTCCLK cycles */ +#define RTC_TamperPrechargeDuration_4RTCCLK ((uint32_t)0x00004000) /*!< Tamper pins are pre-charged before + sampling during 4 RTCCLK cycles */ +#define RTC_TamperPrechargeDuration_8RTCCLK ((uint32_t)0x00006000) /*!< Tamper pins are pre-charged before + sampling during 8 RTCCLK cycles */ + +#define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TamperPrechargeDuration_1RTCCLK) || \ + ((DURATION) == RTC_TamperPrechargeDuration_2RTCCLK) || \ + ((DURATION) == RTC_TamperPrechargeDuration_4RTCCLK) || \ + ((DURATION) == RTC_TamperPrechargeDuration_8RTCCLK)) +/** + * @} + */ + +/** @defgroup RTC_Tamper_Pins_Definitions + * @{ + */ +#define RTC_Tamper_1 RTC_TAFCR_TAMP1E /*!< Tamper detection enable for + input tamper 1 */ +#define RTC_Tamper_2 RTC_TAFCR_TAMP2E /*!< Tamper detection enable for + input tamper 2 */ +#define RTC_Tamper_3 RTC_TAFCR_TAMP3E /*!< Tamper detection enable for + input tamper 3 */ + +#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & (uint32_t)0xFFFFFFD6) == 0x00) && ((TAMPER) != (uint32_t)RESET)) + + +/** + * @} + */ + +/** @defgroup RTC_Output_Type_ALARM_OUT + * @{ + */ +#define RTC_OutputType_OpenDrain ((uint32_t)0x00000000) +#define RTC_OutputType_PushPull ((uint32_t)0x00040000) +#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OutputType_OpenDrain) || \ + ((TYPE) == RTC_OutputType_PushPull)) + +/** + * @} + */ + +/** @defgroup RTC_Add_1_Second_Parameter_Definitions + * @{ + */ +#define RTC_ShiftAdd1S_Reset ((uint32_t)0x00000000) +#define RTC_ShiftAdd1S_Set ((uint32_t)0x80000000) +#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_ShiftAdd1S_Reset) || \ + ((SEL) == RTC_ShiftAdd1S_Set)) +/** + * @} + */ + +/** @defgroup RTC_Substract_Fraction_Of_Second_Value + * @{ + */ +#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFF) + +/** + * @} + */ + +/** @defgroup RTC_Backup_Registers_Definitions + * @{ + */ + +#define RTC_BKP_DR0 ((uint32_t)0x00000000) +#define RTC_BKP_DR1 ((uint32_t)0x00000001) +#define RTC_BKP_DR2 ((uint32_t)0x00000002) +#define RTC_BKP_DR3 ((uint32_t)0x00000003) +#define RTC_BKP_DR4 ((uint32_t)0x00000004) +#define RTC_BKP_DR5 ((uint32_t)0x00000005) +#define RTC_BKP_DR6 ((uint32_t)0x00000006) +#define RTC_BKP_DR7 ((uint32_t)0x00000007) +#define RTC_BKP_DR8 ((uint32_t)0x00000008) +#define RTC_BKP_DR9 ((uint32_t)0x00000009) +#define RTC_BKP_DR10 ((uint32_t)0x0000000A) +#define RTC_BKP_DR11 ((uint32_t)0x0000000B) +#define RTC_BKP_DR12 ((uint32_t)0x0000000C) +#define RTC_BKP_DR13 ((uint32_t)0x0000000D) +#define RTC_BKP_DR14 ((uint32_t)0x0000000E) +#define RTC_BKP_DR15 ((uint32_t)0x0000000F) +#define RTC_BKP_DR16 ((uint32_t)0x00000010) +#define RTC_BKP_DR17 ((uint32_t)0x00000011) +#define RTC_BKP_DR18 ((uint32_t)0x00000012) +#define RTC_BKP_DR19 ((uint32_t)0x00000013) +#define RTC_BKP_DR20 ((uint32_t)0x00000014) +#define RTC_BKP_DR21 ((uint32_t)0x00000015) +#define RTC_BKP_DR22 ((uint32_t)0x00000016) +#define RTC_BKP_DR23 ((uint32_t)0x00000017) +#define RTC_BKP_DR24 ((uint32_t)0x00000018) +#define RTC_BKP_DR25 ((uint32_t)0x00000019) +#define RTC_BKP_DR26 ((uint32_t)0x0000001A) +#define RTC_BKP_DR27 ((uint32_t)0x0000001B) +#define RTC_BKP_DR28 ((uint32_t)0x0000001C) +#define RTC_BKP_DR29 ((uint32_t)0x0000001D) +#define RTC_BKP_DR30 ((uint32_t)0x0000001E) +#define RTC_BKP_DR31 ((uint32_t)0x0000001F) +#define IS_RTC_BKP(BKP) (((BKP) == RTC_BKP_DR0) || \ + ((BKP) == RTC_BKP_DR1) || \ + ((BKP) == RTC_BKP_DR2) || \ + ((BKP) == RTC_BKP_DR3) || \ + ((BKP) == RTC_BKP_DR4) || \ + ((BKP) == RTC_BKP_DR5) || \ + ((BKP) == RTC_BKP_DR6) || \ + ((BKP) == RTC_BKP_DR7) || \ + ((BKP) == RTC_BKP_DR8) || \ + ((BKP) == RTC_BKP_DR9) || \ + ((BKP) == RTC_BKP_DR10) || \ + ((BKP) == RTC_BKP_DR11) || \ + ((BKP) == RTC_BKP_DR12) || \ + ((BKP) == RTC_BKP_DR13) || \ + ((BKP) == RTC_BKP_DR14) || \ + ((BKP) == RTC_BKP_DR15) || \ + ((BKP) == RTC_BKP_DR16) || \ + ((BKP) == RTC_BKP_DR17) || \ + ((BKP) == RTC_BKP_DR18) || \ + ((BKP) == RTC_BKP_DR19) || \ + ((BKP) == RTC_BKP_DR20) || \ + ((BKP) == RTC_BKP_DR21) || \ + ((BKP) == RTC_BKP_DR22) || \ + ((BKP) == RTC_BKP_DR23) || \ + ((BKP) == RTC_BKP_DR24) || \ + ((BKP) == RTC_BKP_DR25) || \ + ((BKP) == RTC_BKP_DR26) || \ + ((BKP) == RTC_BKP_DR27) || \ + ((BKP) == RTC_BKP_DR28) || \ + ((BKP) == RTC_BKP_DR29) || \ + ((BKP) == RTC_BKP_DR30) || \ + ((BKP) == RTC_BKP_DR31)) +/** + * @} + */ + +/** @defgroup RTC_Input_parameter_format_definitions + * @{ + */ +#define RTC_Format_BIN ((uint32_t)0x000000000) +#define RTC_Format_BCD ((uint32_t)0x000000001) +#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_Format_BIN) || ((FORMAT) == RTC_Format_BCD)) + +/** + * @} + */ + +/** @defgroup RTC_Flags_Definitions + * @{ + */ +#define RTC_FLAG_RECALPF ((uint32_t)0x00010000) +#define RTC_FLAG_TAMP3F ((uint32_t)0x00008000) +#define RTC_FLAG_TAMP2F ((uint32_t)0x00004000) +#define RTC_FLAG_TAMP1F ((uint32_t)0x00002000) +#define RTC_FLAG_TSOVF ((uint32_t)0x00001000) +#define RTC_FLAG_TSF ((uint32_t)0x00000800) +#define RTC_FLAG_WUTF ((uint32_t)0x00000400) +#define RTC_FLAG_ALRBF ((uint32_t)0x00000200) +#define RTC_FLAG_ALRAF ((uint32_t)0x00000100) +#define RTC_FLAG_INITF ((uint32_t)0x00000040) +#define RTC_FLAG_RSF ((uint32_t)0x00000020) +#define RTC_FLAG_INITS ((uint32_t)0x00000010) +#define RTC_FLAG_SHPF ((uint32_t)0x00000008) +#define RTC_FLAG_WUTWF ((uint32_t)0x00000004) +#define RTC_FLAG_ALRBWF ((uint32_t)0x00000002) +#define RTC_FLAG_ALRAWF ((uint32_t)0x00000001) +#define IS_RTC_GET_FLAG(FLAG) (((FLAG) == RTC_FLAG_TSOVF) || ((FLAG) == RTC_FLAG_TSF) || \ + ((FLAG) == RTC_FLAG_WUTF) || ((FLAG) == RTC_FLAG_ALRBF) || \ + ((FLAG) == RTC_FLAG_ALRAF) || ((FLAG) == RTC_FLAG_INITF) || \ + ((FLAG) == RTC_FLAG_RSF) || ((FLAG) == RTC_FLAG_WUTWF) || \ + ((FLAG) == RTC_FLAG_ALRBWF) || ((FLAG) == RTC_FLAG_ALRAWF) || \ + ((FLAG) == RTC_FLAG_TAMP1F) || ((FLAG) == RTC_FLAG_TAMP2F) || \ + ((FLAG) == RTC_FLAG_TAMP3F) || ((FLAG) == RTC_FLAG_RECALPF) || \ + ((FLAG) == RTC_FLAG_SHPF)) +#define IS_RTC_CLEAR_FLAG(FLAG) (((FLAG) != (uint32_t)RESET) && (((FLAG) & 0xFFFF00DF) == (uint32_t)RESET)) + +/** + * @} + */ + +/** @defgroup RTC_Interrupts_Definitions + * @{ + */ +#define RTC_IT_TS ((uint32_t)0x00008000) +#define RTC_IT_WUT ((uint32_t)0x00004000) +#define RTC_IT_ALRB ((uint32_t)0x00002000) +#define RTC_IT_ALRA ((uint32_t)0x00001000) +#define RTC_IT_TAMP ((uint32_t)0x00000004) /* Used only to Enable the Tamper Interrupt */ +#define RTC_IT_TAMP1 ((uint32_t)0x00020000) +#define RTC_IT_TAMP2 ((uint32_t)0x00040000) +#define RTC_IT_TAMP3 ((uint32_t)0x00080000) + + +#define IS_RTC_CONFIG_IT(IT) (((IT) != (uint32_t)RESET) && (((IT) & 0xFFFF0FFB) == (uint32_t)RESET)) +#define IS_RTC_GET_IT(IT) (((IT) == RTC_IT_TS) || ((IT) == RTC_IT_WUT) || \ + ((IT) == RTC_IT_ALRB) || ((IT) == RTC_IT_ALRA) || \ + ((IT) == RTC_IT_TAMP1) || ((IT) == RTC_IT_TAMP2) || \ + ((IT) == RTC_IT_TAMP3)) +#define IS_RTC_CLEAR_IT(IT) (((IT) != (uint32_t)RESET) && (((IT) & 0xFFF10FFF) == (uint32_t)RESET)) + +/** + * @} + */ + +/** @defgroup RTC_Legacy + * @{ + */ +#define RTC_DigitalCalibConfig RTC_CoarseCalibConfig +#define RTC_DigitalCalibCmd RTC_CoarseCalibCmd + +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/* Function used to set the RTC configuration to the default reset state *****/ +ErrorStatus RTC_DeInit(void); + + +/* Initialization and Configuration functions *********************************/ +ErrorStatus RTC_Init(RTC_InitTypeDef* RTC_InitStruct); +void RTC_StructInit(RTC_InitTypeDef* RTC_InitStruct); +void RTC_WriteProtectionCmd(FunctionalState NewState); +ErrorStatus RTC_EnterInitMode(void); +void RTC_ExitInitMode(void); +ErrorStatus RTC_WaitForSynchro(void); +ErrorStatus RTC_RefClockCmd(FunctionalState NewState); +void RTC_BypassShadowCmd(FunctionalState NewState); + +/* Time and Date configuration functions **************************************/ +ErrorStatus RTC_SetTime(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_TimeStruct); +void RTC_TimeStructInit(RTC_TimeTypeDef* RTC_TimeStruct); +void RTC_GetTime(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_TimeStruct); +uint32_t RTC_GetSubSecond(void); +ErrorStatus RTC_SetDate(uint32_t RTC_Format, RTC_DateTypeDef* RTC_DateStruct); +void RTC_DateStructInit(RTC_DateTypeDef* RTC_DateStruct); +void RTC_GetDate(uint32_t RTC_Format, RTC_DateTypeDef* RTC_DateStruct); + +/* Alarms (Alarm A and Alarm B) configuration functions **********************/ +void RTC_SetAlarm(uint32_t RTC_Format, uint32_t RTC_Alarm, RTC_AlarmTypeDef* RTC_AlarmStruct); +void RTC_AlarmStructInit(RTC_AlarmTypeDef* RTC_AlarmStruct); +void RTC_GetAlarm(uint32_t RTC_Format, uint32_t RTC_Alarm, RTC_AlarmTypeDef* RTC_AlarmStruct); +ErrorStatus RTC_AlarmCmd(uint32_t RTC_Alarm, FunctionalState NewState); +void RTC_AlarmSubSecondConfig(uint32_t RTC_Alarm, uint32_t RTC_AlarmSubSecondValue, uint32_t RTC_AlarmSubSecondMask); +uint32_t RTC_GetAlarmSubSecond(uint32_t RTC_Alarm); + +/* WakeUp Timer configuration functions ***************************************/ +void RTC_WakeUpClockConfig(uint32_t RTC_WakeUpClock); +void RTC_SetWakeUpCounter(uint32_t RTC_WakeUpCounter); +uint32_t RTC_GetWakeUpCounter(void); +ErrorStatus RTC_WakeUpCmd(FunctionalState NewState); + +/* Daylight Saving configuration functions ************************************/ +void RTC_DayLightSavingConfig(uint32_t RTC_DayLightSaving, uint32_t RTC_StoreOperation); +uint32_t RTC_GetStoreOperation(void); + +/* Output pin Configuration function ******************************************/ +void RTC_OutputConfig(uint32_t RTC_Output, uint32_t RTC_OutputPolarity); + +/* Coarse and Smooth Calibration configuration functions **********************/ +ErrorStatus RTC_CoarseCalibConfig(uint32_t RTC_CalibSign, uint32_t Value); +ErrorStatus RTC_CoarseCalibCmd(FunctionalState NewState); +void RTC_CalibOutputCmd(FunctionalState NewState); +void RTC_CalibOutputConfig(uint32_t RTC_CalibOutput); +ErrorStatus RTC_SmoothCalibConfig(uint32_t RTC_SmoothCalibPeriod, + uint32_t RTC_SmoothCalibPlusPulses, + uint32_t RTC_SmouthCalibMinusPulsesValue); + +/* TimeStamp configuration functions ******************************************/ +void RTC_TimeStampCmd(uint32_t RTC_TimeStampEdge, FunctionalState NewState); +void RTC_GetTimeStamp(uint32_t RTC_Format, RTC_TimeTypeDef* RTC_StampTimeStruct, + RTC_DateTypeDef* RTC_StampDateStruct); +uint32_t RTC_GetTimeStampSubSecond(void); + +/* Tampers configuration functions ********************************************/ +void RTC_TamperTriggerConfig(uint32_t RTC_Tamper, uint32_t RTC_TamperTrigger); +void RTC_TamperCmd(uint32_t RTC_Tamper, FunctionalState NewState); +void RTC_TamperFilterConfig(uint32_t RTC_TamperFilter); +void RTC_TamperSamplingFreqConfig(uint32_t RTC_TamperSamplingFreq); +void RTC_TamperPinsPrechargeDuration(uint32_t RTC_TamperPrechargeDuration); +void RTC_TimeStampOnTamperDetectionCmd(FunctionalState NewState); +void RTC_TamperPullUpCmd(FunctionalState NewState); + +/* Backup Data Registers configuration functions ******************************/ +void RTC_WriteBackupRegister(uint32_t RTC_BKP_DR, uint32_t Data); +uint32_t RTC_ReadBackupRegister(uint32_t RTC_BKP_DR); + +/* Output Type Config configuration functions *********************************/ +void RTC_OutputTypeConfig(uint32_t RTC_OutputType); + +/* RTC_Shift_control_synchonisation_functions *********************************/ +ErrorStatus RTC_SynchroShiftConfig(uint32_t RTC_ShiftAdd1S, uint32_t RTC_ShiftSubFS); + +/* Interrupts and flags management functions **********************************/ +void RTC_ITConfig(uint32_t RTC_IT, FunctionalState NewState); +FlagStatus RTC_GetFlagStatus(uint32_t RTC_FLAG); +void RTC_ClearFlag(uint32_t RTC_FLAG); +ITStatus RTC_GetITStatus(uint32_t RTC_IT); +void RTC_ClearITPendingBit(uint32_t RTC_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32L1xx_RTC_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_sdio.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_sdio.h new file mode 100644 index 0000000..501be5d --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_sdio.h @@ -0,0 +1,535 @@ +/** + ****************************************************************************** + * @file stm32l1xx_sdio.h + * @author MCD Application Team + * @version V1.1.1 + * @date 05-March-2012 + * @brief This file contains all the functions prototypes for the SDIO firmware + * library. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_SDIO_H +#define __STM32L1xx_SDIO_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup SDIO + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +typedef struct +{ + uint32_t SDIO_ClockEdge; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref SDIO_Clock_Edge */ + + uint32_t SDIO_ClockBypass; /*!< Specifies whether the SDIO Clock divider bypass is + enabled or disabled. + This parameter can be a value of @ref SDIO_Clock_Bypass */ + + uint32_t SDIO_ClockPowerSave; /*!< Specifies whether SDIO Clock output is enabled or + disabled when the bus is idle. + This parameter can be a value of @ref SDIO_Clock_Power_Save */ + + uint32_t SDIO_BusWide; /*!< Specifies the SDIO bus width. + This parameter can be a value of @ref SDIO_Bus_Wide */ + + uint32_t SDIO_HardwareFlowControl; /*!< Specifies whether the SDIO hardware flow control is enabled or disabled. + This parameter can be a value of @ref SDIO_Hardware_Flow_Control */ + + uint8_t SDIO_ClockDiv; /*!< Specifies the clock frequency of the SDIO controller. + This parameter can be a value between 0x00 and 0xFF. */ + +} SDIO_InitTypeDef; + +typedef struct +{ + uint32_t SDIO_Argument; /*!< Specifies the SDIO command argument which is sent + to a card as part of a command message. If a command + contains an argument, it must be loaded into this register + before writing the command to the command register */ + + uint32_t SDIO_CmdIndex; /*!< Specifies the SDIO command index. It must be lower than 0x40. */ + + uint32_t SDIO_Response; /*!< Specifies the SDIO response type. + This parameter can be a value of @ref SDIO_Response_Type */ + + uint32_t SDIO_Wait; /*!< Specifies whether SDIO wait-for-interrupt request is enabled or disabled. + This parameter can be a value of @ref SDIO_Wait_Interrupt_State */ + + uint32_t SDIO_CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM) + is enabled or disabled. + This parameter can be a value of @ref SDIO_CPSM_State */ +} SDIO_CmdInitTypeDef; + +typedef struct +{ + uint32_t SDIO_DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */ + + uint32_t SDIO_DataLength; /*!< Specifies the number of data bytes to be transferred. */ + + uint32_t SDIO_DataBlockSize; /*!< Specifies the data block size for block transfer. + This parameter can be a value of @ref SDIO_Data_Block_Size */ + + uint32_t SDIO_TransferDir; /*!< Specifies the data transfer direction, whether the transfer + is a read or write. + This parameter can be a value of @ref SDIO_Transfer_Direction */ + + uint32_t SDIO_TransferMode; /*!< Specifies whether data transfer is in stream or block mode. + This parameter can be a value of @ref SDIO_Transfer_Type */ + + uint32_t SDIO_DPSM; /*!< Specifies whether SDIO Data path state machine (DPSM) + is enabled or disabled. + This parameter can be a value of @ref SDIO_DPSM_State */ +} SDIO_DataInitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup SDIO_Exported_Constants + * @{ + */ + +/** @defgroup SDIO_Clock_Edge + * @{ + */ + +#define SDIO_ClockEdge_Rising ((uint32_t)0x00000000) +#define SDIO_ClockEdge_Falling ((uint32_t)0x00002000) +#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_ClockEdge_Rising) || \ + ((EDGE) == SDIO_ClockEdge_Falling)) +/** + * @} + */ + +/** @defgroup SDIO_Clock_Bypass + * @{ + */ + +#define SDIO_ClockBypass_Disable ((uint32_t)0x00000000) +#define SDIO_ClockBypass_Enable ((uint32_t)0x00000400) +#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_ClockBypass_Disable) || \ + ((BYPASS) == SDIO_ClockBypass_Enable)) +/** + * @} + */ + +/** @defgroup SDIO_Clock_Power_Save + * @{ + */ + +#define SDIO_ClockPowerSave_Disable ((uint32_t)0x00000000) +#define SDIO_ClockPowerSave_Enable ((uint32_t)0x00000200) +#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_ClockPowerSave_Disable) || \ + ((SAVE) == SDIO_ClockPowerSave_Enable)) +/** + * @} + */ + +/** @defgroup SDIO_Bus_Wide + * @{ + */ + +#define SDIO_BusWide_1b ((uint32_t)0x00000000) +#define SDIO_BusWide_4b ((uint32_t)0x00000800) +#define SDIO_BusWide_8b ((uint32_t)0x00001000) +#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BusWide_1b) || ((WIDE) == SDIO_BusWide_4b) || \ + ((WIDE) == SDIO_BusWide_8b)) + +/** + * @} + */ + +/** @defgroup SDIO_Hardware_Flow_Control + * @{ + */ + +#define SDIO_HardwareFlowControl_Disable ((uint32_t)0x00000000) +#define SDIO_HardwareFlowControl_Enable ((uint32_t)0x00004000) +#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HardwareFlowControl_Disable) || \ + ((CONTROL) == SDIO_HardwareFlowControl_Enable)) +/** + * @} + */ + +/** @defgroup SDIO_Power_State + * @{ + */ + +#define SDIO_PowerState_OFF ((uint32_t)0x00000000) +#define SDIO_PowerState_ON ((uint32_t)0x00000003) +#define IS_SDIO_POWER_STATE(STATE) (((STATE) == SDIO_PowerState_OFF) || ((STATE) == SDIO_PowerState_ON)) +/** + * @} + */ + + +/** @defgroup SDIO_Interrupt_soucres + * @{ + */ + +#define SDIO_IT_CCRCFAIL ((uint32_t)0x00000001) +#define SDIO_IT_DCRCFAIL ((uint32_t)0x00000002) +#define SDIO_IT_CTIMEOUT ((uint32_t)0x00000004) +#define SDIO_IT_DTIMEOUT ((uint32_t)0x00000008) +#define SDIO_IT_TXUNDERR ((uint32_t)0x00000010) +#define SDIO_IT_RXOVERR ((uint32_t)0x00000020) +#define SDIO_IT_CMDREND ((uint32_t)0x00000040) +#define SDIO_IT_CMDSENT ((uint32_t)0x00000080) +#define SDIO_IT_DATAEND ((uint32_t)0x00000100) +#define SDIO_IT_STBITERR ((uint32_t)0x00000200) +#define SDIO_IT_DBCKEND ((uint32_t)0x00000400) +#define SDIO_IT_CMDACT ((uint32_t)0x00000800) +#define SDIO_IT_TXACT ((uint32_t)0x00001000) +#define SDIO_IT_RXACT ((uint32_t)0x00002000) +#define SDIO_IT_TXFIFOHE ((uint32_t)0x00004000) +#define SDIO_IT_RXFIFOHF ((uint32_t)0x00008000) +#define SDIO_IT_TXFIFOF ((uint32_t)0x00010000) +#define SDIO_IT_RXFIFOF ((uint32_t)0x00020000) +#define SDIO_IT_TXFIFOE ((uint32_t)0x00040000) +#define SDIO_IT_RXFIFOE ((uint32_t)0x00080000) +#define SDIO_IT_TXDAVL ((uint32_t)0x00100000) +#define SDIO_IT_RXDAVL ((uint32_t)0x00200000) +#define SDIO_IT_SDIOIT ((uint32_t)0x00400000) +#define SDIO_IT_CEATAEND ((uint32_t)0x00800000) +#define IS_SDIO_IT(IT) ((((IT) & (uint32_t)0xFF000000) == 0x00) && ((IT) != (uint32_t)0x00)) +/** + * @} + */ + +/** @defgroup SDIO_Command_Index + * @{ + */ + +#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40) +/** + * @} + */ + +/** @defgroup SDIO_Response_Type + * @{ + */ + +#define SDIO_Response_No ((uint32_t)0x00000000) +#define SDIO_Response_Short ((uint32_t)0x00000040) +#define SDIO_Response_Long ((uint32_t)0x000000C0) +#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_Response_No) || \ + ((RESPONSE) == SDIO_Response_Short) || \ + ((RESPONSE) == SDIO_Response_Long)) +/** + * @} + */ + +/** @defgroup SDIO_Wait_Interrupt_State + * @{ + */ + +#define SDIO_Wait_No ((uint32_t)0x00000000) /*!< SDIO No Wait, TimeOut is enabled */ +#define SDIO_Wait_IT ((uint32_t)0x00000100) /*!< SDIO Wait Interrupt Request */ +#define SDIO_Wait_Pend ((uint32_t)0x00000200) /*!< SDIO Wait End of transfer */ +#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_Wait_No) || ((WAIT) == SDIO_Wait_IT) || \ + ((WAIT) == SDIO_Wait_Pend)) +/** + * @} + */ + +/** @defgroup SDIO_CPSM_State + * @{ + */ + +#define SDIO_CPSM_Disable ((uint32_t)0x00000000) +#define SDIO_CPSM_Enable ((uint32_t)0x00000400) +#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_Enable) || ((CPSM) == SDIO_CPSM_Disable)) +/** + * @} + */ + +/** @defgroup SDIO_Response_Registers + * @{ + */ + +#define SDIO_RESP1 ((uint32_t)0x00000000) +#define SDIO_RESP2 ((uint32_t)0x00000004) +#define SDIO_RESP3 ((uint32_t)0x00000008) +#define SDIO_RESP4 ((uint32_t)0x0000000C) +#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || ((RESP) == SDIO_RESP2) || \ + ((RESP) == SDIO_RESP3) || ((RESP) == SDIO_RESP4)) +/** + * @} + */ + +/** @defgroup SDIO_Data_Length + * @{ + */ + +#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF) +/** + * @} + */ + +/** @defgroup SDIO_Data_Block_Size + * @{ + */ + +#define SDIO_DataBlockSize_1b ((uint32_t)0x00000000) +#define SDIO_DataBlockSize_2b ((uint32_t)0x00000010) +#define SDIO_DataBlockSize_4b ((uint32_t)0x00000020) +#define SDIO_DataBlockSize_8b ((uint32_t)0x00000030) +#define SDIO_DataBlockSize_16b ((uint32_t)0x00000040) +#define SDIO_DataBlockSize_32b ((uint32_t)0x00000050) +#define SDIO_DataBlockSize_64b ((uint32_t)0x00000060) +#define SDIO_DataBlockSize_128b ((uint32_t)0x00000070) +#define SDIO_DataBlockSize_256b ((uint32_t)0x00000080) +#define SDIO_DataBlockSize_512b ((uint32_t)0x00000090) +#define SDIO_DataBlockSize_1024b ((uint32_t)0x000000A0) +#define SDIO_DataBlockSize_2048b ((uint32_t)0x000000B0) +#define SDIO_DataBlockSize_4096b ((uint32_t)0x000000C0) +#define SDIO_DataBlockSize_8192b ((uint32_t)0x000000D0) +#define SDIO_DataBlockSize_16384b ((uint32_t)0x000000E0) +#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DataBlockSize_1b) || \ + ((SIZE) == SDIO_DataBlockSize_2b) || \ + ((SIZE) == SDIO_DataBlockSize_4b) || \ + ((SIZE) == SDIO_DataBlockSize_8b) || \ + ((SIZE) == SDIO_DataBlockSize_16b) || \ + ((SIZE) == SDIO_DataBlockSize_32b) || \ + ((SIZE) == SDIO_DataBlockSize_64b) || \ + ((SIZE) == SDIO_DataBlockSize_128b) || \ + ((SIZE) == SDIO_DataBlockSize_256b) || \ + ((SIZE) == SDIO_DataBlockSize_512b) || \ + ((SIZE) == SDIO_DataBlockSize_1024b) || \ + ((SIZE) == SDIO_DataBlockSize_2048b) || \ + ((SIZE) == SDIO_DataBlockSize_4096b) || \ + ((SIZE) == SDIO_DataBlockSize_8192b) || \ + ((SIZE) == SDIO_DataBlockSize_16384b)) +/** + * @} + */ + +/** @defgroup SDIO_Transfer_Direction + * @{ + */ + +#define SDIO_TransferDir_ToCard ((uint32_t)0x00000000) +#define SDIO_TransferDir_ToSDIO ((uint32_t)0x00000002) +#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TransferDir_ToCard) || \ + ((DIR) == SDIO_TransferDir_ToSDIO)) +/** + * @} + */ + +/** @defgroup SDIO_Transfer_Type + * @{ + */ + +#define SDIO_TransferMode_Block ((uint32_t)0x00000000) +#define SDIO_TransferMode_Stream ((uint32_t)0x00000004) +#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TransferMode_Stream) || \ + ((MODE) == SDIO_TransferMode_Block)) +/** + * @} + */ + +/** @defgroup SDIO_DPSM_State + * @{ + */ + +#define SDIO_DPSM_Disable ((uint32_t)0x00000000) +#define SDIO_DPSM_Enable ((uint32_t)0x00000001) +#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_Enable) || ((DPSM) == SDIO_DPSM_Disable)) +/** + * @} + */ + +/** @defgroup SDIO_Flags + * @{ + */ + +#define SDIO_FLAG_CCRCFAIL ((uint32_t)0x00000001) +#define SDIO_FLAG_DCRCFAIL ((uint32_t)0x00000002) +#define SDIO_FLAG_CTIMEOUT ((uint32_t)0x00000004) +#define SDIO_FLAG_DTIMEOUT ((uint32_t)0x00000008) +#define SDIO_FLAG_TXUNDERR ((uint32_t)0x00000010) +#define SDIO_FLAG_RXOVERR ((uint32_t)0x00000020) +#define SDIO_FLAG_CMDREND ((uint32_t)0x00000040) +#define SDIO_FLAG_CMDSENT ((uint32_t)0x00000080) +#define SDIO_FLAG_DATAEND ((uint32_t)0x00000100) +#define SDIO_FLAG_STBITERR ((uint32_t)0x00000200) +#define SDIO_FLAG_DBCKEND ((uint32_t)0x00000400) +#define SDIO_FLAG_CMDACT ((uint32_t)0x00000800) +#define SDIO_FLAG_TXACT ((uint32_t)0x00001000) +#define SDIO_FLAG_RXACT ((uint32_t)0x00002000) +#define SDIO_FLAG_TXFIFOHE ((uint32_t)0x00004000) +#define SDIO_FLAG_RXFIFOHF ((uint32_t)0x00008000) +#define SDIO_FLAG_TXFIFOF ((uint32_t)0x00010000) +#define SDIO_FLAG_RXFIFOF ((uint32_t)0x00020000) +#define SDIO_FLAG_TXFIFOE ((uint32_t)0x00040000) +#define SDIO_FLAG_RXFIFOE ((uint32_t)0x00080000) +#define SDIO_FLAG_TXDAVL ((uint32_t)0x00100000) +#define SDIO_FLAG_RXDAVL ((uint32_t)0x00200000) +#define SDIO_FLAG_SDIOIT ((uint32_t)0x00400000) +#define SDIO_FLAG_CEATAEND ((uint32_t)0x00800000) +#define IS_SDIO_FLAG(FLAG) (((FLAG) == SDIO_FLAG_CCRCFAIL) || \ + ((FLAG) == SDIO_FLAG_DCRCFAIL) || \ + ((FLAG) == SDIO_FLAG_CTIMEOUT) || \ + ((FLAG) == SDIO_FLAG_DTIMEOUT) || \ + ((FLAG) == SDIO_FLAG_TXUNDERR) || \ + ((FLAG) == SDIO_FLAG_RXOVERR) || \ + ((FLAG) == SDIO_FLAG_CMDREND) || \ + ((FLAG) == SDIO_FLAG_CMDSENT) || \ + ((FLAG) == SDIO_FLAG_DATAEND) || \ + ((FLAG) == SDIO_FLAG_STBITERR) || \ + ((FLAG) == SDIO_FLAG_DBCKEND) || \ + ((FLAG) == SDIO_FLAG_CMDACT) || \ + ((FLAG) == SDIO_FLAG_TXACT) || \ + ((FLAG) == SDIO_FLAG_RXACT) || \ + ((FLAG) == SDIO_FLAG_TXFIFOHE) || \ + ((FLAG) == SDIO_FLAG_RXFIFOHF) || \ + ((FLAG) == SDIO_FLAG_TXFIFOF) || \ + ((FLAG) == SDIO_FLAG_RXFIFOF) || \ + ((FLAG) == SDIO_FLAG_TXFIFOE) || \ + ((FLAG) == SDIO_FLAG_RXFIFOE) || \ + ((FLAG) == SDIO_FLAG_TXDAVL) || \ + ((FLAG) == SDIO_FLAG_RXDAVL) || \ + ((FLAG) == SDIO_FLAG_SDIOIT) || \ + ((FLAG) == SDIO_FLAG_CEATAEND)) + +#define IS_SDIO_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFF3FF800) == 0x00) && ((FLAG) != (uint32_t)0x00)) + +#define IS_SDIO_GET_IT(IT) (((IT) == SDIO_IT_CCRCFAIL) || \ + ((IT) == SDIO_IT_DCRCFAIL) || \ + ((IT) == SDIO_IT_CTIMEOUT) || \ + ((IT) == SDIO_IT_DTIMEOUT) || \ + ((IT) == SDIO_IT_TXUNDERR) || \ + ((IT) == SDIO_IT_RXOVERR) || \ + ((IT) == SDIO_IT_CMDREND) || \ + ((IT) == SDIO_IT_CMDSENT) || \ + ((IT) == SDIO_IT_DATAEND) || \ + ((IT) == SDIO_IT_STBITERR) || \ + ((IT) == SDIO_IT_DBCKEND) || \ + ((IT) == SDIO_IT_CMDACT) || \ + ((IT) == SDIO_IT_TXACT) || \ + ((IT) == SDIO_IT_RXACT) || \ + ((IT) == SDIO_IT_TXFIFOHE) || \ + ((IT) == SDIO_IT_RXFIFOHF) || \ + ((IT) == SDIO_IT_TXFIFOF) || \ + ((IT) == SDIO_IT_RXFIFOF) || \ + ((IT) == SDIO_IT_TXFIFOE) || \ + ((IT) == SDIO_IT_RXFIFOE) || \ + ((IT) == SDIO_IT_TXDAVL) || \ + ((IT) == SDIO_IT_RXDAVL) || \ + ((IT) == SDIO_IT_SDIOIT) || \ + ((IT) == SDIO_IT_CEATAEND)) + +#define IS_SDIO_CLEAR_IT(IT) ((((IT) & (uint32_t)0xFF3FF800) == 0x00) && ((IT) != (uint32_t)0x00)) + +/** + * @} + */ + +/** @defgroup SDIO_Read_Wait_Mode + * @{ + */ + +#define SDIO_ReadWaitMode_CLK ((uint32_t)0x00000001) +#define SDIO_ReadWaitMode_DATA2 ((uint32_t)0x00000000) +#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_ReadWaitMode_CLK) || \ + ((MODE) == SDIO_ReadWaitMode_DATA2)) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ +/* Function used to set the SDIO configuration to the default reset state ****/ +void SDIO_DeInit(void); + +/* Initialization and Configuration functions *********************************/ +void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct); +void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct); +void SDIO_ClockCmd(FunctionalState NewState); +void SDIO_SetPowerState(uint32_t SDIO_PowerState); +uint32_t SDIO_GetPowerState(void); + +/* DMA transfers management functions *****************************************/ +void SDIO_DMACmd(FunctionalState NewState); + +/* Command path state machine (CPSM) management functions *********************/ +void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct); +void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct); +uint8_t SDIO_GetCommandResponse(void); +uint32_t SDIO_GetResponse(uint32_t SDIO_RESP); + +/* Data path state machine (DPSM) management functions ************************/ +void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct); +void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct); +uint32_t SDIO_GetDataCounter(void); +uint32_t SDIO_ReadData(void); +void SDIO_WriteData(uint32_t Data); +uint32_t SDIO_GetFIFOCount(void); + +/* SDIO IO Cards mode management functions ************************************/ +void SDIO_StartSDIOReadWait(FunctionalState NewState); +void SDIO_StopSDIOReadWait(FunctionalState NewState); +void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode); +void SDIO_SetSDIOOperation(FunctionalState NewState); +void SDIO_SendSDIOSuspendCmd(FunctionalState NewState); + +/* CE-ATA mode management functions *******************************************/ +void SDIO_CommandCompletionCmd(FunctionalState NewState); +void SDIO_CEATAITCmd(FunctionalState NewState); +void SDIO_SendCEATACmd(FunctionalState NewState); + +/* Interrupts and flags management functions **********************************/ +void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState); +FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG); +void SDIO_ClearFlag(uint32_t SDIO_FLAG); +ITStatus SDIO_GetITStatus(uint32_t SDIO_IT); +void SDIO_ClearITPendingBit(uint32_t SDIO_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_SDIO_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_spi.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_spi.h new file mode 100644 index 0000000..d6e0b4b --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_spi.h @@ -0,0 +1,524 @@ +/** + ****************************************************************************** + * @file stm32l1xx_spi.h + * @author MCD Application Team + * @version V1.1.1 + * @date 05-March-2012 + * @brief This file contains all the functions prototypes for the SPI + * firmware library. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_SPI_H +#define __STM32L1xx_SPI_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup SPI + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief SPI Init structure definition + */ + +typedef struct +{ + uint16_t SPI_Direction; /*!< Specifies the SPI unidirectional or bidirectional data mode. + This parameter can be a value of @ref SPI_data_direction */ + + uint16_t SPI_Mode; /*!< Specifies the SPI operating mode. + This parameter can be a value of @ref SPI_mode */ + + uint16_t SPI_DataSize; /*!< Specifies the SPI data size. + This parameter can be a value of @ref SPI_data_size */ + + uint16_t SPI_CPOL; /*!< Specifies the serial clock steady state. + This parameter can be a value of @ref SPI_Clock_Polarity */ + + uint16_t SPI_CPHA; /*!< Specifies the clock active edge for the bit capture. + This parameter can be a value of @ref SPI_Clock_Phase */ + + uint16_t SPI_NSS; /*!< Specifies whether the NSS signal is managed by + hardware (NSS pin) or by software using the SSI bit. + This parameter can be a value of @ref SPI_Slave_Select_management */ + + uint16_t SPI_BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be + used to configure the transmit and receive SCK clock. + This parameter can be a value of @ref SPI_BaudRate_Prescaler + @note The communication clock is derived from the master + clock. The slave clock does not need to be set. */ + + uint16_t SPI_FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. + This parameter can be a value of @ref SPI_MSB_LSB_transmission */ + + uint16_t SPI_CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. */ +}SPI_InitTypeDef; + +/** + * @brief I2S Init structure definition + */ + +typedef struct +{ + + uint16_t I2S_Mode; /*!< Specifies the I2S operating mode. + This parameter can be a value of @ref SPI_I2S_Mode */ + + uint16_t I2S_Standard; /*!< Specifies the standard used for the I2S communication. + This parameter can be a value of @ref SPI_I2S_Standard */ + + uint16_t I2S_DataFormat; /*!< Specifies the data format for the I2S communication. + This parameter can be a value of @ref SPI_I2S_Data_Format */ + + uint16_t I2S_MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. + This parameter can be a value of @ref SPI_I2S_MCLK_Output */ + + uint32_t I2S_AudioFreq; /*!< Specifies the frequency selected for the I2S communication. + This parameter can be a value of @ref SPI_I2S_Audio_Frequency */ + + uint16_t I2S_CPOL; /*!< Specifies the idle state of the I2S clock. + This parameter can be a value of @ref SPI_I2S_Clock_Polarity */ +}I2S_InitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup SPI_Exported_Constants + * @{ + */ + +#define IS_SPI_ALL_PERIPH(PERIPH) (((PERIPH) == SPI1) || \ + ((PERIPH) == SPI2) || \ + ((PERIPH) == SPI3)) +#define IS_SPI_23_PERIPH(PERIPH) (((PERIPH) == SPI2) || \ + ((PERIPH) == SPI3)) + +/** @defgroup SPI_data_direction + * @{ + */ + +#define SPI_Direction_2Lines_FullDuplex ((uint16_t)0x0000) +#define SPI_Direction_2Lines_RxOnly ((uint16_t)0x0400) +#define SPI_Direction_1Line_Rx ((uint16_t)0x8000) +#define SPI_Direction_1Line_Tx ((uint16_t)0xC000) +#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_Direction_2Lines_FullDuplex) || \ + ((MODE) == SPI_Direction_2Lines_RxOnly) || \ + ((MODE) == SPI_Direction_1Line_Rx) || \ + ((MODE) == SPI_Direction_1Line_Tx)) +/** + * @} + */ + +/** @defgroup SPI_mode + * @{ + */ + +#define SPI_Mode_Master ((uint16_t)0x0104) +#define SPI_Mode_Slave ((uint16_t)0x0000) +#define IS_SPI_MODE(MODE) (((MODE) == SPI_Mode_Master) || \ + ((MODE) == SPI_Mode_Slave)) +/** + * @} + */ + +/** @defgroup SPI_data_size + * @{ + */ + +#define SPI_DataSize_16b ((uint16_t)0x0800) +#define SPI_DataSize_8b ((uint16_t)0x0000) +#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DataSize_16b) || \ + ((DATASIZE) == SPI_DataSize_8b)) +/** + * @} + */ + +/** @defgroup SPI_Clock_Polarity + * @{ + */ + +#define SPI_CPOL_Low ((uint16_t)0x0000) +#define SPI_CPOL_High ((uint16_t)0x0002) +#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_CPOL_Low) || \ + ((CPOL) == SPI_CPOL_High)) +/** + * @} + */ + +/** @defgroup SPI_Clock_Phase + * @{ + */ + +#define SPI_CPHA_1Edge ((uint16_t)0x0000) +#define SPI_CPHA_2Edge ((uint16_t)0x0001) +#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_CPHA_1Edge) || \ + ((CPHA) == SPI_CPHA_2Edge)) +/** + * @} + */ + +/** @defgroup SPI_Slave_Select_management + * @{ + */ + +#define SPI_NSS_Soft ((uint16_t)0x0200) +#define SPI_NSS_Hard ((uint16_t)0x0000) +#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_Soft) || \ + ((NSS) == SPI_NSS_Hard)) +/** + * @} + */ + +/** @defgroup SPI_BaudRate_Prescaler + * @{ + */ + +#define SPI_BaudRatePrescaler_2 ((uint16_t)0x0000) +#define SPI_BaudRatePrescaler_4 ((uint16_t)0x0008) +#define SPI_BaudRatePrescaler_8 ((uint16_t)0x0010) +#define SPI_BaudRatePrescaler_16 ((uint16_t)0x0018) +#define SPI_BaudRatePrescaler_32 ((uint16_t)0x0020) +#define SPI_BaudRatePrescaler_64 ((uint16_t)0x0028) +#define SPI_BaudRatePrescaler_128 ((uint16_t)0x0030) +#define SPI_BaudRatePrescaler_256 ((uint16_t)0x0038) +#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BaudRatePrescaler_2) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_4) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_8) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_16) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_32) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_64) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_128) || \ + ((PRESCALER) == SPI_BaudRatePrescaler_256)) +/** + * @} + */ + +/** @defgroup SPI_MSB_LSB_transmission + * @{ + */ + +#define SPI_FirstBit_MSB ((uint16_t)0x0000) +#define SPI_FirstBit_LSB ((uint16_t)0x0080) +#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FirstBit_MSB) || \ + ((BIT) == SPI_FirstBit_LSB)) +/** + * @} + */ + +/** @defgroup SPI_I2S_Mode + * @{ + */ + +#define I2S_Mode_SlaveTx ((uint16_t)0x0000) +#define I2S_Mode_SlaveRx ((uint16_t)0x0100) +#define I2S_Mode_MasterTx ((uint16_t)0x0200) +#define I2S_Mode_MasterRx ((uint16_t)0x0300) +#define IS_I2S_MODE(MODE) (((MODE) == I2S_Mode_SlaveTx) || \ + ((MODE) == I2S_Mode_SlaveRx) || \ + ((MODE) == I2S_Mode_MasterTx)|| \ + ((MODE) == I2S_Mode_MasterRx)) +/** + * @} + */ + + +/** @defgroup SPI_I2S_Standard + * @{ + */ + +#define I2S_Standard_Phillips ((uint16_t)0x0000) +#define I2S_Standard_MSB ((uint16_t)0x0010) +#define I2S_Standard_LSB ((uint16_t)0x0020) +#define I2S_Standard_PCMShort ((uint16_t)0x0030) +#define I2S_Standard_PCMLong ((uint16_t)0x00B0) +#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_Standard_Phillips) || \ + ((STANDARD) == I2S_Standard_MSB) || \ + ((STANDARD) == I2S_Standard_LSB) || \ + ((STANDARD) == I2S_Standard_PCMShort) || \ + ((STANDARD) == I2S_Standard_PCMLong)) +/** + * @} + */ + +/** @defgroup SPI_I2S_Data_Format + * @{ + */ + +#define I2S_DataFormat_16b ((uint16_t)0x0000) +#define I2S_DataFormat_16bextended ((uint16_t)0x0001) +#define I2S_DataFormat_24b ((uint16_t)0x0003) +#define I2S_DataFormat_32b ((uint16_t)0x0005) +#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DataFormat_16b) || \ + ((FORMAT) == I2S_DataFormat_16bextended) || \ + ((FORMAT) == I2S_DataFormat_24b) || \ + ((FORMAT) == I2S_DataFormat_32b)) +/** + * @} + */ + +/** @defgroup SPI_I2S_MCLK_Output + * @{ + */ + +#define I2S_MCLKOutput_Enable ((uint16_t)0x0200) +#define I2S_MCLKOutput_Disable ((uint16_t)0x0000) +#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOutput_Enable) || \ + ((OUTPUT) == I2S_MCLKOutput_Disable)) +/** + * @} + */ + +/** @defgroup SPI_I2S_Audio_Frequency + * @{ + */ + +#define I2S_AudioFreq_192k ((uint32_t)192000) +#define I2S_AudioFreq_96k ((uint32_t)96000) +#define I2S_AudioFreq_48k ((uint32_t)48000) +#define I2S_AudioFreq_44k ((uint32_t)44100) +#define I2S_AudioFreq_32k ((uint32_t)32000) +#define I2S_AudioFreq_22k ((uint32_t)22050) +#define I2S_AudioFreq_16k ((uint32_t)16000) +#define I2S_AudioFreq_11k ((uint32_t)11025) +#define I2S_AudioFreq_8k ((uint32_t)8000) +#define I2S_AudioFreq_Default ((uint32_t)2) + +#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AudioFreq_8k) && \ + ((FREQ) <= I2S_AudioFreq_192k)) || \ + ((FREQ) == I2S_AudioFreq_Default)) +/** + * @} + */ + +/** @defgroup SPI_I2S_Clock_Polarity + * @{ + */ + +#define I2S_CPOL_Low ((uint16_t)0x0000) +#define I2S_CPOL_High ((uint16_t)0x0008) +#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_Low) || \ + ((CPOL) == I2S_CPOL_High)) +/** + * @} + */ + +/** @defgroup SPI_I2S_DMA_transfer_requests + * @{ + */ + +#define SPI_I2S_DMAReq_Tx ((uint16_t)0x0002) +#define SPI_I2S_DMAReq_Rx ((uint16_t)0x0001) +#define IS_SPI_I2S_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFFFC) == 0x00) && ((DMAREQ) != 0x00)) +/** + * @} + */ + +/** @defgroup SPI_NSS_internal_software_management + * @{ + */ + +#define SPI_NSSInternalSoft_Set ((uint16_t)0x0100) +#define SPI_NSSInternalSoft_Reset ((uint16_t)0xFEFF) +#define IS_SPI_NSS_INTERNAL(INTERNAL) (((INTERNAL) == SPI_NSSInternalSoft_Set) || \ + ((INTERNAL) == SPI_NSSInternalSoft_Reset)) +/** + * @} + */ + +/** @defgroup SPI_CRC_Transmit_Receive + * @{ + */ + +#define SPI_CRC_Tx ((uint8_t)0x00) +#define SPI_CRC_Rx ((uint8_t)0x01) +#define IS_SPI_CRC(CRC) (((CRC) == SPI_CRC_Tx) || ((CRC) == SPI_CRC_Rx)) +/** + * @} + */ + +/** @defgroup SPI_direction_transmit_receive + * @{ + */ + +#define SPI_Direction_Rx ((uint16_t)0xBFFF) +#define SPI_Direction_Tx ((uint16_t)0x4000) +#define IS_SPI_DIRECTION(DIRECTION) (((DIRECTION) == SPI_Direction_Rx) || \ + ((DIRECTION) == SPI_Direction_Tx)) +/** + * @} + */ + +/** @defgroup SPI_I2S_interrupts_definition + * @{ + */ + +#define SPI_I2S_IT_TXE ((uint8_t)0x71) +#define SPI_I2S_IT_RXNE ((uint8_t)0x60) +#define SPI_I2S_IT_ERR ((uint8_t)0x50) +#define I2S_IT_UDR ((uint8_t)0x53) +#define SPI_I2S_IT_FRE ((uint8_t)0x58) + +#define IS_SPI_I2S_CONFIG_IT(IT) (((IT) == SPI_I2S_IT_TXE) || \ + ((IT) == SPI_I2S_IT_RXNE) || \ + ((IT) == SPI_I2S_IT_ERR)) + +#define SPI_I2S_IT_OVR ((uint8_t)0x56) +#define SPI_IT_MODF ((uint8_t)0x55) +#define SPI_IT_CRCERR ((uint8_t)0x54) + +#define IS_SPI_I2S_CLEAR_IT(IT) (((IT) == SPI_IT_CRCERR)) + +#define IS_SPI_I2S_GET_IT(IT) (((IT) == SPI_I2S_IT_RXNE) || ((IT) == SPI_I2S_IT_TXE) || \ + ((IT) == SPI_IT_CRCERR) || ((IT) == SPI_IT_MODF) || \ + ((IT) == SPI_I2S_IT_OVR) || ((IT) == I2S_IT_UDR) ||\ + ((IT) == SPI_I2S_IT_FRE)) +/** + * @} + */ + +/** @defgroup SPI_I2S_flags_definition + * @{ + */ + +#define SPI_I2S_FLAG_RXNE ((uint16_t)0x0001) +#define SPI_I2S_FLAG_TXE ((uint16_t)0x0002) +#define I2S_FLAG_CHSIDE ((uint16_t)0x0004) +#define I2S_FLAG_UDR ((uint16_t)0x0008) +#define SPI_FLAG_CRCERR ((uint16_t)0x0010) +#define SPI_FLAG_MODF ((uint16_t)0x0020) +#define SPI_I2S_FLAG_OVR ((uint16_t)0x0040) +#define SPI_I2S_FLAG_BSY ((uint16_t)0x0080) +#define SPI_I2S_FLAG_FRE ((uint16_t)0x0100) + +#define IS_SPI_I2S_CLEAR_FLAG(FLAG) (((FLAG) == SPI_FLAG_CRCERR)) +#define IS_SPI_I2S_GET_FLAG(FLAG) (((FLAG) == SPI_I2S_FLAG_BSY) || ((FLAG) == SPI_I2S_FLAG_OVR) || \ + ((FLAG) == SPI_FLAG_MODF) || ((FLAG) == SPI_FLAG_CRCERR) || \ + ((FLAG) == I2S_FLAG_UDR) || ((FLAG) == I2S_FLAG_CHSIDE) || \ + ((FLAG) == SPI_I2S_FLAG_TXE) || ((FLAG) == SPI_I2S_FLAG_RXNE)|| \ + ((FLAG) == SPI_I2S_FLAG_FRE)) +/** + * @} + */ + +/** @defgroup SPI_CRC_polynomial + * @{ + */ + +#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) ((POLYNOMIAL) >= 0x1) +/** + * @} + */ + +/** @defgroup SPI_I2S_Legacy + * @{ + */ + +#define SPI_DMAReq_Tx SPI_I2S_DMAReq_Tx +#define SPI_DMAReq_Rx SPI_I2S_DMAReq_Rx +#define SPI_IT_TXE SPI_I2S_IT_TXE +#define SPI_IT_RXNE SPI_I2S_IT_RXNE +#define SPI_IT_ERR SPI_I2S_IT_ERR +#define SPI_IT_OVR SPI_I2S_IT_OVR +#define SPI_FLAG_RXNE SPI_I2S_FLAG_RXNE +#define SPI_FLAG_TXE SPI_I2S_FLAG_TXE +#define SPI_FLAG_OVR SPI_I2S_FLAG_OVR +#define SPI_FLAG_BSY SPI_I2S_FLAG_BSY +#define SPI_DeInit SPI_I2S_DeInit +#define SPI_ITConfig SPI_I2S_ITConfig +#define SPI_DMACmd SPI_I2S_DMACmd +#define SPI_SendData SPI_I2S_SendData +#define SPI_ReceiveData SPI_I2S_ReceiveData +#define SPI_GetFlagStatus SPI_I2S_GetFlagStatus +#define SPI_ClearFlag SPI_I2S_ClearFlag +#define SPI_GetITStatus SPI_I2S_GetITStatus +#define SPI_ClearITPendingBit SPI_I2S_ClearITPendingBit +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/* Function used to set the SPI configuration to the default reset state *****/ +void SPI_I2S_DeInit(SPI_TypeDef* SPIx); + +/* Initialization and Configuration functions *********************************/ +void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct); +void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct); +void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct); +void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct); +void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); +void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); +void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize); +void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction); +void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft); +void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState); + +/* Data transfers functions ***************************************************/ +void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data); +uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx); + +/* Hardware CRC Calculation functions *****************************************/ +void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState); +void SPI_TransmitCRC(SPI_TypeDef* SPIx); +uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC); +uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx); + +/* DMA transfers management functions *****************************************/ +void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState); + +/* Interrupts and flags management functions **********************************/ +void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState); +FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); +void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); +ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT); +void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT); + +#ifdef __cplusplus +} +#endif + +#endif /*__STM32L1xx_SPI_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_usart.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_usart.h new file mode 100644 index 0000000..9c6b303 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32L1xx_StdPeriph_Driver/inc/stm32l1xx_usart.h @@ -0,0 +1,427 @@ +/** + ****************************************************************************** + * @file stm32l1xx_usart.h + * @author MCD Application Team + * @version V1.1.1 + * @date 05-March-2012 + * @brief This file contains all the functions prototypes for the USART + * firmware library. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L1xx_USART_H +#define __STM32L1xx_USART_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" + +/** @addtogroup STM32L1xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup USART + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + +/** + * @brief USART Init Structure definition + */ + +typedef struct +{ + uint32_t USART_BaudRate; /*!< This member configures the USART communication baud rate. + The baud rate is computed using the following formula: + - IntegerDivider = ((PCLKx) / (8 * (OVR8+1) * (USART_InitStruct->USART_BaudRate))) + - FractionalDivider = ((IntegerDivider - ((u32) IntegerDivider)) * 8 * (OVR8+1)) + 0.5 + Where OVR8 is the "oversampling by 8 mode" configuration bit in the CR1 register. */ + + uint16_t USART_WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref USART_Word_Length */ + + uint16_t USART_StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref USART_Stop_Bits */ + + uint16_t USART_Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref USART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint16_t USART_Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref USART_Mode */ + + uint16_t USART_HardwareFlowControl; /*!< Specifies wether the hardware flow control mode is enabled + or disabled. + This parameter can be a value of @ref USART_Hardware_Flow_Control */ +} USART_InitTypeDef; + +/** + * @brief USART Clock Init Structure definition + */ + +typedef struct +{ + + uint16_t USART_Clock; /*!< Specifies whether the USART clock is enabled or disabled. + This parameter can be a value of @ref USART_Clock */ + + uint16_t USART_CPOL; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref USART_Clock_Polarity */ + + uint16_t USART_CPHA; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref USART_Clock_Phase */ + + uint16_t USART_LastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref USART_Last_Bit */ +} USART_ClockInitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup USART_Exported_Constants + * @{ + */ + +#define IS_USART_ALL_PERIPH(PERIPH) (((PERIPH) == USART1) || \ + ((PERIPH) == USART2) || \ + ((PERIPH) == USART3) || \ + ((PERIPH) == UART4) || \ + ((PERIPH) == UART5)) + +#define IS_USART_123_PERIPH(PERIPH) (((PERIPH) == USART1) || \ + ((PERIPH) == USART2) || \ + ((PERIPH) == USART3)) + +/** @defgroup USART_Word_Length + * @{ + */ + +#define USART_WordLength_8b ((uint16_t)0x0000) +#define USART_WordLength_9b ((uint16_t)0x1000) + +#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WordLength_8b) || \ + ((LENGTH) == USART_WordLength_9b)) +/** + * @} + */ + +/** @defgroup USART_Stop_Bits + * @{ + */ + +#define USART_StopBits_1 ((uint16_t)0x0000) +#define USART_StopBits_0_5 ((uint16_t)0x1000) +#define USART_StopBits_2 ((uint16_t)0x2000) +#define USART_StopBits_1_5 ((uint16_t)0x3000) +#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_StopBits_1) || \ + ((STOPBITS) == USART_StopBits_0_5) || \ + ((STOPBITS) == USART_StopBits_2) || \ + ((STOPBITS) == USART_StopBits_1_5)) +/** + * @} + */ + +/** @defgroup USART_Parity + * @{ + */ + +#define USART_Parity_No ((uint16_t)0x0000) +#define USART_Parity_Even ((uint16_t)0x0400) +#define USART_Parity_Odd ((uint16_t)0x0600) +#define IS_USART_PARITY(PARITY) (((PARITY) == USART_Parity_No) || \ + ((PARITY) == USART_Parity_Even) || \ + ((PARITY) == USART_Parity_Odd)) +/** + * @} + */ + +/** @defgroup USART_Mode + * @{ + */ + +#define USART_Mode_Rx ((uint16_t)0x0004) +#define USART_Mode_Tx ((uint16_t)0x0008) +#define IS_USART_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00)) +/** + * @} + */ + +/** @defgroup USART_Hardware_Flow_Control + * @{ + */ +#define USART_HardwareFlowControl_None ((uint16_t)0x0000) +#define USART_HardwareFlowControl_RTS ((uint16_t)0x0100) +#define USART_HardwareFlowControl_CTS ((uint16_t)0x0200) +#define USART_HardwareFlowControl_RTS_CTS ((uint16_t)0x0300) +#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)\ + (((CONTROL) == USART_HardwareFlowControl_None) || \ + ((CONTROL) == USART_HardwareFlowControl_RTS) || \ + ((CONTROL) == USART_HardwareFlowControl_CTS) || \ + ((CONTROL) == USART_HardwareFlowControl_RTS_CTS)) +/** + * @} + */ + +/** @defgroup USART_Clock + * @{ + */ +#define USART_Clock_Disable ((uint16_t)0x0000) +#define USART_Clock_Enable ((uint16_t)0x0800) +#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_Clock_Disable) || \ + ((CLOCK) == USART_Clock_Enable)) +/** + * @} + */ + +/** @defgroup USART_Clock_Polarity + * @{ + */ + +#define USART_CPOL_Low ((uint16_t)0x0000) +#define USART_CPOL_High ((uint16_t)0x0400) +#define IS_USART_CPOL(CPOL) (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High)) + +/** + * @} + */ + +/** @defgroup USART_Clock_Phase + * @{ + */ + +#define USART_CPHA_1Edge ((uint16_t)0x0000) +#define USART_CPHA_2Edge ((uint16_t)0x0200) +#define IS_USART_CPHA(CPHA) (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge)) + +/** + * @} + */ + +/** @defgroup USART_Last_Bit + * @{ + */ + +#define USART_LastBit_Disable ((uint16_t)0x0000) +#define USART_LastBit_Enable ((uint16_t)0x0100) +#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LastBit_Disable) || \ + ((LASTBIT) == USART_LastBit_Enable)) +/** + * @} + */ + +/** @defgroup USART_Interrupt_definition + * @{ + */ + +#define USART_IT_PE ((uint16_t)0x0028) +#define USART_IT_TXE ((uint16_t)0x0727) +#define USART_IT_TC ((uint16_t)0x0626) +#define USART_IT_RXNE ((uint16_t)0x0525) +#define USART_IT_IDLE ((uint16_t)0x0424) +#define USART_IT_LBD ((uint16_t)0x0846) +#define USART_IT_ORE_RX ((uint16_t)0x0325) /* In case interrupt is generated if the RXNEIE bit is set */ +#define USART_IT_CTS ((uint16_t)0x096A) +#define USART_IT_ERR ((uint16_t)0x0060) +#define USART_IT_ORE_ER ((uint16_t)0x0360) /* In case interrupt is generated if the EIE bit is set */ +#define USART_IT_NE ((uint16_t)0x0260) +#define USART_IT_FE ((uint16_t)0x0160) + +/** @defgroup USART_Legacy + * @{ + */ +#define USART_IT_ORE USART_IT_ORE_ER +/** + * @} + */ + +#define IS_USART_CONFIG_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ + ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ + ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ + ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ERR)) +#define IS_USART_GET_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ + ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ + ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ + ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ORE_RX) || \ + ((IT) == USART_IT_ORE_ER) || ((IT) == USART_IT_NE) || \ + ((IT) == USART_IT_FE)) +#define IS_USART_CLEAR_IT(IT) (((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ + ((IT) == USART_IT_LBD) || ((IT) == USART_IT_CTS)) +/** + * @} + */ + +/** @defgroup USART_DMA_Requests + * @{ + */ + +#define USART_DMAReq_Tx ((uint16_t)0x0080) +#define USART_DMAReq_Rx ((uint16_t)0x0040) +#define IS_USART_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFF3F) == 0x00) && ((DMAREQ) != (uint16_t)0x00)) + +/** + * @} + */ + +/** @defgroup USART_WakeUp_methods + * @{ + */ + +#define USART_WakeUp_IdleLine ((uint16_t)0x0000) +#define USART_WakeUp_AddressMark ((uint16_t)0x0800) +#define IS_USART_WAKEUP(WAKEUP) (((WAKEUP) == USART_WakeUp_IdleLine) || \ + ((WAKEUP) == USART_WakeUp_AddressMark)) +/** + * @} + */ + +/** @defgroup USART_LIN_Break_Detection_Length + * @{ + */ + +#define USART_LINBreakDetectLength_10b ((uint16_t)0x0000) +#define USART_LINBreakDetectLength_11b ((uint16_t)0x0020) +#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH) \ + (((LENGTH) == USART_LINBreakDetectLength_10b) || \ + ((LENGTH) == USART_LINBreakDetectLength_11b)) +/** + * @} + */ + +/** @defgroup USART_IrDA_Low_Power + * @{ + */ + +#define USART_IrDAMode_LowPower ((uint16_t)0x0004) +#define USART_IrDAMode_Normal ((uint16_t)0x0000) +#define IS_USART_IRDA_MODE(MODE) (((MODE) == USART_IrDAMode_LowPower) || \ + ((MODE) == USART_IrDAMode_Normal)) +/** + * @} + */ + +/** @defgroup USART_Flags + * @{ + */ + +#define USART_FLAG_CTS ((uint16_t)0x0200) +#define USART_FLAG_LBD ((uint16_t)0x0100) +#define USART_FLAG_TXE ((uint16_t)0x0080) +#define USART_FLAG_TC ((uint16_t)0x0040) +#define USART_FLAG_RXNE ((uint16_t)0x0020) +#define USART_FLAG_IDLE ((uint16_t)0x0010) +#define USART_FLAG_ORE ((uint16_t)0x0008) +#define USART_FLAG_NE ((uint16_t)0x0004) +#define USART_FLAG_FE ((uint16_t)0x0002) +#define USART_FLAG_PE ((uint16_t)0x0001) +#define IS_USART_FLAG(FLAG) (((FLAG) == USART_FLAG_PE) || ((FLAG) == USART_FLAG_TXE) || \ + ((FLAG) == USART_FLAG_TC) || ((FLAG) == USART_FLAG_RXNE) || \ + ((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_LBD) || \ + ((FLAG) == USART_FLAG_CTS) || ((FLAG) == USART_FLAG_ORE) || \ + ((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE)) + +#define IS_USART_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFC9F) == 0x00) && ((FLAG) != (uint16_t)0x00)) + +#define IS_USART_BAUDRATE(BAUDRATE) (((BAUDRATE) > 0) && ((BAUDRATE) < 0x003D0901)) +#define IS_USART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF) +#define IS_USART_DATA(DATA) ((DATA) <= 0x1FF) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/* Function used to set the USART configuration to the default reset state ***/ +void USART_DeInit(USART_TypeDef* USARTx); + +/* Initialization and Configuration functions *********************************/ +void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct); +void USART_StructInit(USART_InitTypeDef* USART_InitStruct); +void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct); +void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct); +void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler); +void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState); + +/* Data transfers functions ***************************************************/ +void USART_SendData(USART_TypeDef* USARTx, uint16_t Data); +uint16_t USART_ReceiveData(USART_TypeDef* USARTx); + +/* Multi-Processor Communication functions ************************************/ +void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address); +void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp); +void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState); + +/* LIN mode functions *********************************************************/ +void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength); +void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_SendBreak(USART_TypeDef* USARTx); + +/* Half-duplex mode function **************************************************/ +void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState); + +/* Smartcard mode functions ***************************************************/ +void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime); + +/* IrDA mode functions ********************************************************/ +void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode); +void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState); + +/* DMA transfers management functions *****************************************/ +void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState); + +/* Interrupts and flags management functions **********************************/ +void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState); +FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG); +void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG); +ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT); +void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L1xx_USART_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |