aboutsummaryrefslogtreecommitdiff
path: root/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Device_Firmware_Upgrade/readme.txt
diff options
context:
space:
mode:
Diffstat (limited to 'thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Device_Firmware_Upgrade/readme.txt')
-rw-r--r--thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Device_Firmware_Upgrade/readme.txt173
1 files changed, 173 insertions, 0 deletions
diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Device_Firmware_Upgrade/readme.txt b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Device_Firmware_Upgrade/readme.txt
new file mode 100644
index 0000000..25ca5c0
--- /dev/null
+++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Device_Firmware_Upgrade/readme.txt
@@ -0,0 +1,173 @@
+/**
+ ******************************************************************************
+ * @file readme.txt
+ * @author MCD Application Team
+ * @version V4.0.0
+ * @date 21-January-2013
+ * @brief Description of the USB Device_Firmware_Upgrade Demo.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************
+ */
+
+
+Example description
+===================
+This Demo presents the implementation of a device firmware upgrade (DFU) capability
+in the STM32F10xxx, STM32F37xxx, STM32F30xxx and STM32L15xxx microcontrollers. It follows the DFU class
+specification defined by the USB Implementers Forum for reprogramming an application
+through USB-FS-Device.
+The DFU principle is particularly well suited to USB-FS-Device applications that
+need to be reprogrammed in the field.
+
+More details about this Demo implementation is given in the User manual
+"UM0424 STM32F10xxx USB development kit", available for download from the ST
+microcontrollers website: www.st.com/stm32
+
+
+Directory contents
+==================
+ + \binary_template: contains a set of sources files that build the application
+ to be loaded with DFU
+ + \inc: contains the Demo firmware header files
+ + \EWARM: contains preconfigured project for EWARM toolchain
+ + \RIDE: contains preconfigured project for RIDE toolchain
+ + \MDK-ARM: contains preconfigured project for MDK-ARM toolchain
+ + \TASKING: contains preconfigured project for TASKING toolchain
+ + \TrueSTUDIO: contains preconfigured projects for TrueSTUDIO toolchain
+ + \src: contains the Demo firmware source files
+
+
+Hardware environment
+====================
+This example runs these STMicroelectronics evaluation boards and can be easily tailored to any other hardware:
+
+- STM3210B-EVAL
+- STM3210E-EVAL
+- STM32L152-EVAL
+- STM32F373C_EVAL
+- STM32F303C_EVAL
+- STM32L152D-EVAL
+
+To select the STMicroelectronics evaluation board used to run the example, uncomment
+the corresponding line in platform_config.h file.
+
+Note: After each device reset, hold down the Key push-button on the STM3210B-EVAL
+ or STM3210E-EVAL or STM32L152D-EVAL or STM32F373C-EVAL evaluation boards or the Up push button
+ on STM32L152-EVAL evaluation board to enter the DFU mode.
+
+ - STM3210B-EVAL Set-up
+ - Jumper JP1 (USB disconnect) should be connected in position 2-3.
+
+ - STM3210E-EVAL Set-up
+ - Jumper JP14 (USB disconnect) should be connected in position 2-3.
+
+ - STM32L152-EVAL Set-up
+ - None.
+ - Note that the JoyStick Up push button is used to enter DFU mode.
+
+ - STM32L152D-EVAL Set-up
+ - None.
+
+ - STM32F373C-EVAL Set-up
+ - None.
+
+ - STM32F303C-EVAL Set-up
+ - None.
+
+How to use it
+=============
+ + EWARM
+ - Open the DFU.eww workspace.
+ - In the workspace toolbar select the project config:
+ - STM3210B-EVAL: to configure the project for STM32 Medium-density devices
+ - STM3210E-EVAL: to configure the project for STM32 High-density devices
+ - STM3210E-EVAL_XL: to configure the project for STM32 XL-density devices
+ - STM32L152-EVAL: to configure the project for STM32 Medium-Density Low-Power devices
+ - STM32L152D-EVAL: to configure the project for STM32 High-Density Low-Power devices
+ - STM32373C-EVAL: to configure the project for STM32F37xxx devices
+ - STM32303C-EVAL: to configure the project for STM32F30xxx devices
+ - Rebuild all files: Project->Rebuild all
+ - Load project image: Project->Debug
+ - Run program: Debug->Go(F5)
+
+ + MDK-ARM
+ - Open the DFU.Uv2 project
+ - In the build toolbar select the project config:
+ - STM3210B-EVAL: to configure the project for STM32 Medium-density devices
+ - STM3210E-EVAL: to configure the project for STM32 High-density devices
+ - STM3210E-EVAL_XL: to configure the project for STM32 XL-density devices
+ - STM32L152-EVAL: to configure the project for STM32 Medium-Density Low-Power devices
+ - STM32L152D-EVAL: to configure the project for STM32 High-Density Low-Power devices
+ - STM32373C-EVAL: to configure the project for STM32F37xxx devices
+ - STM32303C-EVAL: to configure the project for STM32F30xxx devices
+ - Rebuild all files: Project->Rebuild all target files
+ - Load project image: Debug->Start/Stop Debug Session
+ - Run program: Debug->Run (F5)
+
+ + RIDE
+ - Open the DFU.rprj project.
+ - In the configuration toolbar(Project->properties) select the project config:
+ - STM3210B-EVAL: to configure the project for STM32 Medium-density devices
+ - STM3210E-EVAL: to configure the project for STM32 High-density devices
+ - STM3210E-EVAL_XL: to configure the project for STM32 XL-density devices
+ - STM32L152-EVAL: to configure the project for STM32 Medium-Density Low-Power devices
+ - STM32L152D-EVAL: to configure the project for STM32 High-Density Low-Power devices
+ - STM32373C-EVAL: to configure the project for STM32F37xxx devices
+ - STM32303C-EVAL: to configure the project for STM32F30xxx devices
+ - Rebuild all files: Project->build project
+ - Load project image: Debug->start(ctrl+D)
+ - Run program: Debug->Run(ctrl+F9)
+
+ + TASKING
+ - Open TASKING toolchain.
+ - Click on File->Import, select General->'Existing Projects into Workspace'
+ and then click "Next".
+ - Browse to TASKING workspace directory and select the project:
+ - STM3210B-EVAL: to configure the project for STM32 Medium-density devices
+ - STM3210E-EVAL: to configure the project for STM32 High-density devices
+ - STM3210E-EVAL_XL: to configure the project for STM32 XL-density devices
+ - STM32L152-EVAL: to configure the project for STM32 Medium-Density Low-Power devices
+ - STM32L152D-EVAL: to configure the project for STM32 High-Density Low-Power devices
+ - STM32373C-EVAL: to configure the project for STM32F37xxx devices
+ - STM32303C-EVAL: to configure the project for STM32F30xxx devices
+ - Rebuild all project files: Select the project in the "Project explorer"
+ window then click on Project->build project menu.
+ - Run program: Select the project in the "Project explorer" window then click
+ Run->Debug (F11)
+
+ + TrueSTUDIO
+ - Open the TrueSTUDIO toolchain.
+ - Click on File->Switch Workspace->Other and browse to TrueSTUDIO workspace
+ directory.
+ - Click on File->Import, select General->'Existing Projects into Workspace'
+ and then click "Next".
+ - Browse to the TrueSTUDIO workspace directory and select the project:
+ - STM3210B-EVAL: to load the project for STM32 Medium-density devices
+ - STM3210E-EVAL: to load the project for STM32 High-density devices
+ - STM3210E_EVAL_XL: to load the project for STM32 XL-density devices
+ - STM32L152_EVAL: to load the project for STM32 Medium-Density Low-Power devices
+ - STM32L152D-EVAL: to configure the project for STM32 High-Density Low-Power devices
+ - STM32373C-EVAL: to configure the project for STM32F37xxx devices
+ - STM32303C-EVAL: to configure the project for STM32F30xxx devices
+ - Rebuild all project files: Select the project in the "Project explorer"
+ window then click on Project->build project menu.
+ - Run program: Select the project in the "Project explorer" window then click
+ Run->Debug (F11)
+
+************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE******
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-02 08:55:13 +0000