diff options
Diffstat (limited to 'thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Utilities/STM32_EVAL/STM3210E_EVAL/stm3210e_eval.h')
| -rw-r--r-- | thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Utilities/STM32_EVAL/STM3210E_EVAL/stm3210e_eval.h | 407 |
1 files changed, 407 insertions, 0 deletions
diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Utilities/STM32_EVAL/STM3210E_EVAL/stm3210e_eval.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Utilities/STM32_EVAL/STM3210E_EVAL/stm3210e_eval.h new file mode 100644 index 0000000..1f9fbe0 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Utilities/STM32_EVAL/STM3210E_EVAL/stm3210e_eval.h @@ -0,0 +1,407 @@ +/** + ****************************************************************************** + * @file stm3210e_eval.h + * @author MCD Application Team + * @version V5.1.0 + * @date 18-January-2013 + * @brief This file contains definitions for STM3210E_EVAL's Leds, push-buttons + * COM ports, sFLASH (on SPI) and Temperature Sensor LM75 (on I2C) + * hardware resources. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2013 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM3210E_EVAL_H +#define __STM3210E_EVAL_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" +#include "stm32_eval_legacy.h" + +/** @addtogroup Utilities + * @{ + */ + +/** @addtogroup STM32_EVAL + * @{ + */ + +/** @addtogroup STM3210E_EVAL + * @{ + */ + +/** @addtogroup STM3210E_EVAL_LOW_LEVEL + * @{ + */ + +/** @defgroup STM3210E_EVAL_LOW_LEVEL_Exported_Types + * @{ + */ +typedef enum +{ + LED1 = 0, + LED2 = 1, + LED3 = 2, + LED4 = 3 +} Led_TypeDef; + +typedef enum +{ + BUTTON_WAKEUP = 0, + BUTTON_TAMPER = 1, + BUTTON_KEY = 2, + BUTTON_RIGHT = 3, + BUTTON_LEFT = 4, + BUTTON_UP = 5, + BUTTON_DOWN = 6, + BUTTON_SEL = 7 +} Button_TypeDef; + +typedef enum +{ + BUTTON_MODE_GPIO = 0, + BUTTON_MODE_EXTI = 1 +} ButtonMode_TypeDef; + +typedef enum +{ + JOY_NONE = 0, + JOY_SEL = 1, + JOY_DOWN = 2, + JOY_LEFT = 3, + JOY_RIGHT = 4, + JOY_UP = 5 +} JOYState_TypeDef +; + +typedef enum +{ + COM1 = 0, + COM2 = 1 +} COM_TypeDef; +/** + * @} + */ + +/** @defgroup STM3210E_EVAL_LOW_LEVEL_Exported_Constants + * @{ + */ +/** + * @brief Define for STM3210E_EVAL board + */ +#if !defined (USE_STM3210E_EVAL) + #define USE_STM3210E_EVAL +#endif + +/** @addtogroup STM3210E_EVAL_LOW_LEVEL_LED + * @{ + */ +#define LEDn 4 + +#define LED1_PIN GPIO_Pin_6 +#define LED1_GPIO_PORT GPIOF +#define LED1_GPIO_CLK RCC_APB2Periph_GPIOF + +#define LED2_PIN GPIO_Pin_7 +#define LED2_GPIO_PORT GPIOF +#define LED2_GPIO_CLK RCC_APB2Periph_GPIOF + +#define LED3_PIN GPIO_Pin_8 +#define LED3_GPIO_PORT GPIOF +#define LED3_GPIO_CLK RCC_APB2Periph_GPIOF + +#define LED4_PIN GPIO_Pin_9 +#define LED4_GPIO_PORT GPIOF +#define LED4_GPIO_CLK RCC_APB2Periph_GPIOF + +/** + * @} + */ + +/** @addtogroup STM3210E_EVAL_LOW_LEVEL_BUTTON + * @{ + */ +#define BUTTONn 8 + +/** + * @brief Wakeup push-button + */ +#define WAKEUP_BUTTON_PIN GPIO_Pin_0 +#define WAKEUP_BUTTON_GPIO_PORT GPIOA +#define WAKEUP_BUTTON_GPIO_CLK RCC_APB2Periph_GPIOA +#define WAKEUP_BUTTON_EXTI_LINE EXTI_Line0 +#define WAKEUP_BUTTON_EXTI_PORT_SOURCE GPIO_PortSourceGPIOA +#define WAKEUP_BUTTON_EXTI_PIN_SOURCE GPIO_PinSource0 +#define WAKEUP_BUTTON_EXTI_IRQn EXTI0_IRQn +/** + * @brief Tamper push-button + */ +#define TAMPER_BUTTON_PIN GPIO_Pin_13 +#define TAMPER_BUTTON_GPIO_PORT GPIOC +#define TAMPER_BUTTON_GPIO_CLK RCC_APB2Periph_GPIOC +#define TAMPER_BUTTON_EXTI_LINE EXTI_Line13 +#define TAMPER_BUTTON_EXTI_PORT_SOURCE GPIO_PortSourceGPIOC +#define TAMPER_BUTTON_EXTI_PIN_SOURCE GPIO_PinSource13 +#define TAMPER_BUTTON_EXTI_IRQn EXTI15_10_IRQn +/** + * @brief Key push-button + */ +#define KEY_BUTTON_PIN GPIO_Pin_8 +#define KEY_BUTTON_GPIO_PORT GPIOG +#define KEY_BUTTON_GPIO_CLK RCC_APB2Periph_GPIOG +#define KEY_BUTTON_EXTI_LINE EXTI_Line8 +#define KEY_BUTTON_EXTI_PORT_SOURCE GPIO_PortSourceGPIOG +#define KEY_BUTTON_EXTI_PIN_SOURCE GPIO_PinSource8 +#define KEY_BUTTON_EXTI_IRQn EXTI9_5_IRQn +/** + * @brief Joystick Right push-button + */ +#define RIGHT_BUTTON_PIN GPIO_Pin_13 +#define RIGHT_BUTTON_GPIO_PORT GPIOG +#define RIGHT_BUTTON_GPIO_CLK RCC_APB2Periph_GPIOG +#define RIGHT_BUTTON_EXTI_LINE EXTI_Line13 +#define RIGHT_BUTTON_EXTI_PORT_SOURCE GPIO_PortSourceGPIOG +#define RIGHT_BUTTON_EXTI_PIN_SOURCE GPIO_PinSource13 +#define RIGHT_BUTTON_EXTI_IRQn EXTI15_10_IRQn +/** + * @brief Joystick Left push-button + */ +#define LEFT_BUTTON_PIN GPIO_Pin_14 +#define LEFT_BUTTON_GPIO_PORT GPIOG +#define LEFT_BUTTON_GPIO_CLK RCC_APB2Periph_GPIOG +#define LEFT_BUTTON_EXTI_LINE EXTI_Line14 +#define LEFT_BUTTON_EXTI_PORT_SOURCE GPIO_PortSourceGPIOG +#define LEFT_BUTTON_EXTI_PIN_SOURCE GPIO_PinSource14 +#define LEFT_BUTTON_EXTI_IRQn EXTI15_10_IRQn +/** + * @brief Joystick Up push-button + */ +#define UP_BUTTON_PIN GPIO_Pin_15 +#define UP_BUTTON_GPIO_PORT GPIOG +#define UP_BUTTON_GPIO_CLK RCC_APB2Periph_GPIOG +#define UP_BUTTON_EXTI_LINE EXTI_Line15 +#define UP_BUTTON_EXTI_PORT_SOURCE GPIO_PortSourceGPIOG +#define UP_BUTTON_EXTI_PIN_SOURCE GPIO_PinSource15 +#define UP_BUTTON_EXTI_IRQn EXTI15_10_IRQn +/** + * @brief Joystick Down push-button + */ +#define DOWN_BUTTON_PIN GPIO_Pin_3 +#define DOWN_BUTTON_GPIO_PORT GPIOD +#define DOWN_BUTTON_GPIO_CLK RCC_APB2Periph_GPIOD +#define DOWN_BUTTON_EXTI_LINE EXTI_Line3 +#define DOWN_BUTTON_EXTI_PORT_SOURCE GPIO_PortSourceGPIOD +#define DOWN_BUTTON_EXTI_PIN_SOURCE GPIO_PinSource3 +#define DOWN_BUTTON_EXTI_IRQn EXTI3_IRQn +/** + * @brief Joystick Sel push-button + */ +#define SEL_BUTTON_PIN GPIO_Pin_7 +#define SEL_BUTTON_GPIO_PORT GPIOG +#define SEL_BUTTON_GPIO_CLK RCC_APB2Periph_GPIOG +#define SEL_BUTTON_EXTI_LINE EXTI_Line7 +#define SEL_BUTTON_EXTI_PORT_SOURCE GPIO_PortSourceGPIOG +#define SEL_BUTTON_EXTI_PIN_SOURCE GPIO_PinSource7 +#define SEL_BUTTON_EXTI_IRQn EXTI9_5_IRQn +/** + * @} + */ + +/** @addtogroup STM3210E_EVAL_LOW_LEVEL_COM + * @{ + */ +#define COMn 2 + +/** + * @brief Definition for COM port1, connected to USART1 + */ +#define EVAL_COM1 USART1 +#define EVAL_COM1_CLK RCC_APB2Periph_USART1 +#define EVAL_COM1_TX_PIN GPIO_Pin_9 +#define EVAL_COM1_TX_GPIO_PORT GPIOA +#define EVAL_COM1_TX_GPIO_CLK RCC_APB2Periph_GPIOA +#define EVAL_COM1_RX_PIN GPIO_Pin_10 +#define EVAL_COM1_RX_GPIO_PORT GPIOA +#define EVAL_COM1_RX_GPIO_CLK RCC_APB2Periph_GPIOA +#define EVAL_COM1_IRQn USART1_IRQn + +/** + * @brief Definition for COM port2, connected to USART2 + */ +#define EVAL_COM2 USART2 +#define EVAL_COM2_CLK RCC_APB1Periph_USART2 +#define EVAL_COM2_TX_PIN GPIO_Pin_2 +#define EVAL_COM2_TX_GPIO_PORT GPIOA +#define EVAL_COM2_TX_GPIO_CLK RCC_APB2Periph_GPIOA +#define EVAL_COM2_RX_PIN GPIO_Pin_3 +#define EVAL_COM2_RX_GPIO_PORT GPIOA +#define EVAL_COM2_RX_GPIO_CLK RCC_APB2Periph_GPIOA +#define EVAL_COM2_IRQn USART2_IRQn + +/** + * @} + */ + +/** @addtogroup STM3210E_EVAL_LOW_LEVEL_SD_FLASH + * @{ + */ +/** + * @brief SD FLASH SDIO Interface + */ + +#define SD_DETECT_PIN GPIO_Pin_11 /* PF.11 */ +#define SD_DETECT_GPIO_PORT GPIOF /* GPIOF */ +#define SD_DETECT_GPIO_CLK RCC_APB2Periph_GPIOF + +#define SDIO_FIFO_ADDRESS ((uint32_t)0x40018080) +/** + * @brief SDIO Intialization Frequency (400KHz max) + */ +#define SDIO_INIT_CLK_DIV ((uint8_t)0xB2) +/** + * @brief SDIO Data Transfer Frequency (25MHz max) + */ +#define SDIO_TRANSFER_CLK_DIV ((uint8_t)0x01) + +#define SD_SDIO_DMA DMA2 +#define SD_SDIO_DMA_CLK RCC_AHBPeriph_DMA2 +#define SD_SDIO_DMA_CHANNEL DMA2_Channel4 +#define SD_SDIO_DMA_FLAG_TC DMA2_FLAG_TC4 +#define SD_SDIO_DMA_FLAG_TE DMA2_FLAG_TE4 +#define SD_SDIO_DMA_FLAG_HT DMA2_FLAG_HT4 +#define SD_SDIO_DMA_FLAG_GL DMA2_FLAG_GL4 +#define SD_SDIO_DMA_IRQn DMA2_Channel4_5_IRQn +#define SD_SDIO_DMA_IRQHANDLER DMA2_Channel4_5_IRQHandler + +/** + * @} + */ + +/** @addtogroup STM3210E_EVAL_LOW_LEVEL_M25P_FLASH_SPI + * @{ + */ +/** + * @brief M25P FLASH SPI Interface pins + */ +#define sFLASH_SPI SPI1 +#define sFLASH_SPI_CLK RCC_APB2Periph_SPI1 +#define sFLASH_SPI_SCK_PIN GPIO_Pin_5 /* PA.05 */ +#define sFLASH_SPI_SCK_GPIO_PORT GPIOA /* GPIOA */ +#define sFLASH_SPI_SCK_GPIO_CLK RCC_APB2Periph_GPIOA +#define sFLASH_SPI_MISO_PIN GPIO_Pin_6 /* PA.06 */ +#define sFLASH_SPI_MISO_GPIO_PORT GPIOA /* GPIOA */ +#define sFLASH_SPI_MISO_GPIO_CLK RCC_APB2Periph_GPIOA +#define sFLASH_SPI_MOSI_PIN GPIO_Pin_7 /* PA.07 */ +#define sFLASH_SPI_MOSI_GPIO_PORT GPIOA /* GPIOA */ +#define sFLASH_SPI_MOSI_GPIO_CLK RCC_APB2Periph_GPIOA +#define sFLASH_CS_PIN GPIO_Pin_2 /* PB.02 */ +#define sFLASH_CS_GPIO_PORT GPIOB /* GPIOB */ +#define sFLASH_CS_GPIO_CLK RCC_APB2Periph_GPIOB + +/** + * @} + */ + +/** @addtogroup STM3210E_EVAL_LOW_LEVEL_TSENSOR_I2C + * @{ + */ +/** + * @brief LM75 Temperature Sensor I2C Interface pins + */ +#define LM75_I2C I2C1 +#define LM75_I2C_CLK RCC_APB1Periph_I2C1 +#define LM75_I2C_SCL_PIN GPIO_Pin_6 /* PB.06 */ +#define LM75_I2C_SCL_GPIO_PORT GPIOB /* GPIOB */ +#define LM75_I2C_SCL_GPIO_CLK RCC_APB2Periph_GPIOB +#define LM75_I2C_SDA_PIN GPIO_Pin_7 /* PB.07 */ +#define LM75_I2C_SDA_GPIO_PORT GPIOB /* GPIOB */ +#define LM75_I2C_SDA_GPIO_CLK RCC_APB2Periph_GPIOB +#define LM75_I2C_SMBUSALERT_PIN GPIO_Pin_5 /* PB.05 */ +#define LM75_I2C_SMBUSALERT_GPIO_PORT GPIOB /* GPIOB */ +#define LM75_I2C_SMBUSALERT_GPIO_CLK RCC_APB2Periph_GPIOB +#define LM75_I2C_DR ((uint32_t)0x40005410) + +#define LM75_DMA_CLK RCC_AHBPeriph_DMA1 +#define LM75_DMA_TX_CHANNEL DMA1_Channel6 +#define LM75_DMA_RX_CHANNEL DMA1_Channel7 +#define LM75_DMA_TX_TCFLAG DMA1_FLAG_TC6 +#define LM75_DMA_RX_TCFLAG DMA1_FLAG_TC7 +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup STM3210E_EVAL_LOW_LEVEL_Exported_Macros + * @{ + */ +/** + * @} + */ + +/** @defgroup STM3210E_EVAL_LOW_LEVEL_Exported_Functions + * @{ + */ +void STM_EVAL_LEDInit(Led_TypeDef Led); +void STM_EVAL_LEDOn(Led_TypeDef Led); +void STM_EVAL_LEDOff(Led_TypeDef Led); +void STM_EVAL_LEDToggle(Led_TypeDef Led); +void STM_EVAL_PBInit(Button_TypeDef Button, ButtonMode_TypeDef Button_Mode); +uint32_t STM_EVAL_PBGetState(Button_TypeDef Button); +void STM_EVAL_COMInit(COM_TypeDef COM, USART_InitTypeDef* USART_InitStruct); +void SD_LowLevel_DeInit(void); +void SD_LowLevel_Init(void); +void SD_LowLevel_DMA_TxConfig(uint32_t *BufferSRC, uint32_t BufferSize); +void SD_LowLevel_DMA_RxConfig(uint32_t *BufferDST, uint32_t BufferSize); +void sFLASH_LowLevel_DeInit(void); +void sFLASH_LowLevel_Init(void); +void LM75_LowLevel_DeInit(void); +void LM75_LowLevel_Init(void); +/** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif /* __STM3210E_EVAL_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |