1 files changed, 129 insertions, 0 deletions
diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Utilities/STM32_EVAL/STM32373C_EVAL/stm32373c_eval_i2c_tsensor_cpal.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Utilities/STM32_EVAL/STM32373C_EVAL/stm32373c_eval_i2c_tsensor_cpal.h
new file mode 100644
index 0000000..dd868b4
--- /dev/null
+++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Utilities/STM32_EVAL/STM32373C_EVAL/stm32373c_eval_i2c_tsensor_cpal.h
@@ -0,0 +1,129 @@
+/**
+  ******************************************************************************
+  * @file    stm32373c_eval_i2c_tsensor_cpal.h
+  * @author  MCD Application Team
+  * @version V1.0.0
+  * @date    20-September-2012
+  * @brief   This file contains all the functions prototypes for the 
+  *          stm32373c_eval_i2c_tsensor_cpal.c firmware driver.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32373C_EVAL_I2C_TSENSOR_CPAL_H
+#define __STM32373C_EVAL_I2C_TSENSOR_CPAL_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+   
+   
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f37x_i2c_cpal.h"
+   
+/* Exported types ------------------------------------------------------------*/
+
+/** 
+  * @brief  TSENSOR Status  
+  */ 
+typedef enum
+{
+  LM75_OK = 0,
+  LM75_FAIL
+}LM75_Status_TypDef;
+
+/* Exported constants --------------------------------------------------------*/
+    
+/*====================== CPAL Structure configuration ========================*/ 
+/* Select I2C device (uncomment relative define) */
+
+//#define LM75_DevStructure                I2C1_DevStructure   
+#define LM75_DevStructure                I2C2_DevStructure  
+
+   
+/*============== TIMING Configuration ==========================*/
+/* I2C TIMING Register define when I2C clock source is SYSCLK */
+/* I2C TIMING is calculated in case of the I2C Clock source is the SYSCLK = 72 MHz */
+/* set TIMING to 0xC062121F to reach 100 KHz speed (Rise time = 640ns, Fall time = 20ns) */
+
+#define LM75_I2C_TIMING              0xC062121F
+
+
+/*=================== Programming model Configuration ========================*/
+/* Select interrupt programming model : By default DMA programming model is selected.
+ To select interrupt programming model uncomment this define */
+//#define LM75_IT
+
+
+/* Maximum Timeout values for waiting until device is ready for communication.*/
+   
+#define LM75_TIMEOUT        ((uint32_t)0x3FFFF)
+
+/**
+  * @brief  Internal register Memory
+  */
+#define LM75_REG_TEMP       0x00  /*!< Temperature Register of LM75 */
+#define LM75_REG_CONF       0x01  /*!< Configuration Register of LM75 */
+#define LM75_REG_THYS       0x02  /*!< Temperature Register of LM75 */
+#define LM75_REG_TOS        0x03  /*!< Over-temp Shutdown threshold Register of LM75 */
+#define LM75_ADDR           0x90   /*!< LM75 address */
+   
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */ 
+
+void LM75_DeInit(void);
+void LM75_Config(void);
+ErrorStatus LM75_GetStatus(void);
+uint16_t LM75_ReadTemp(void);
+uint16_t LM75_ReadReg(uint8_t RegName);
+uint8_t LM75_WriteReg(uint8_t RegName, uint16_t RegValue);
+uint8_t LM75_ReadConfReg(void);
+uint8_t LM75_WriteConfReg(uint8_t RegValue);
+uint8_t LM75_ShutDown(FunctionalState NewState);
+
+
+ 
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32373C_EVAL_I2C_TSENSOR_CPAL_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/