diff options
Diffstat (limited to 'tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h')
| -rw-r--r-- | tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h | 412 |
1 files changed, 0 insertions, 412 deletions
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h deleted file mode 100644 index 162fa87..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h +++ /dev/null @@ -1,412 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_usart.h - * @author MCD Application Team - * @version V3.5.0 - * @date 11-March-2011 - * @brief This file contains all the functions prototypes for the USART - * firmware library. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_USART_H -#define __STM32F10x_USART_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup USART - * @{ - */ - -/** @defgroup USART_Exported_Types - * @{ - */ - -/** - * @brief USART Init Structure definition - */ - -typedef struct -{ - uint32_t USART_BaudRate; /*!< This member configures the USART communication baud rate. - The baud rate is computed using the following formula: - - IntegerDivider = ((PCLKx) / (16 * (USART_InitStruct->USART_BaudRate))) - - FractionalDivider = ((IntegerDivider - ((u32) IntegerDivider)) * 16) + 0.5 */ - - uint16_t USART_WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. - This parameter can be a value of @ref USART_Word_Length */ - - uint16_t USART_StopBits; /*!< Specifies the number of stop bits transmitted. - This parameter can be a value of @ref USART_Stop_Bits */ - - uint16_t USART_Parity; /*!< Specifies the parity mode. - This parameter can be a value of @ref USART_Parity - @note When parity is enabled, the computed parity is inserted - at the MSB position of the transmitted data (9th bit when - the word length is set to 9 data bits; 8th bit when the - word length is set to 8 data bits). */ - - uint16_t USART_Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled. - This parameter can be a value of @ref USART_Mode */ - - uint16_t USART_HardwareFlowControl; /*!< Specifies wether the hardware flow control mode is enabled - or disabled. - This parameter can be a value of @ref USART_Hardware_Flow_Control */ -} USART_InitTypeDef; - -/** - * @brief USART Clock Init Structure definition - */ - -typedef struct -{ - - uint16_t USART_Clock; /*!< Specifies whether the USART clock is enabled or disabled. - This parameter can be a value of @ref USART_Clock */ - - uint16_t USART_CPOL; /*!< Specifies the steady state value of the serial clock. - This parameter can be a value of @ref USART_Clock_Polarity */ - - uint16_t USART_CPHA; /*!< Specifies the clock transition on which the bit capture is made. - This parameter can be a value of @ref USART_Clock_Phase */ - - uint16_t USART_LastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted - data bit (MSB) has to be output on the SCLK pin in synchronous mode. - This parameter can be a value of @ref USART_Last_Bit */ -} USART_ClockInitTypeDef; - -/** - * @} - */ - -/** @defgroup USART_Exported_Constants - * @{ - */ - -#define IS_USART_ALL_PERIPH(PERIPH) (((PERIPH) == USART1) || \ - ((PERIPH) == USART2) || \ - ((PERIPH) == USART3) || \ - ((PERIPH) == UART4) || \ - ((PERIPH) == UART5)) - -#define IS_USART_123_PERIPH(PERIPH) (((PERIPH) == USART1) || \ - ((PERIPH) == USART2) || \ - ((PERIPH) == USART3)) - -#define IS_USART_1234_PERIPH(PERIPH) (((PERIPH) == USART1) || \ - ((PERIPH) == USART2) || \ - ((PERIPH) == USART3) || \ - ((PERIPH) == UART4)) -/** @defgroup USART_Word_Length - * @{ - */ - -#define USART_WordLength_8b ((uint16_t)0x0000) -#define USART_WordLength_9b ((uint16_t)0x1000) - -#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WordLength_8b) || \ - ((LENGTH) == USART_WordLength_9b)) -/** - * @} - */ - -/** @defgroup USART_Stop_Bits - * @{ - */ - -#define USART_StopBits_1 ((uint16_t)0x0000) -#define USART_StopBits_0_5 ((uint16_t)0x1000) -#define USART_StopBits_2 ((uint16_t)0x2000) -#define USART_StopBits_1_5 ((uint16_t)0x3000) -#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_StopBits_1) || \ - ((STOPBITS) == USART_StopBits_0_5) || \ - ((STOPBITS) == USART_StopBits_2) || \ - ((STOPBITS) == USART_StopBits_1_5)) -/** - * @} - */ - -/** @defgroup USART_Parity - * @{ - */ - -#define USART_Parity_No ((uint16_t)0x0000) -#define USART_Parity_Even ((uint16_t)0x0400) -#define USART_Parity_Odd ((uint16_t)0x0600) -#define IS_USART_PARITY(PARITY) (((PARITY) == USART_Parity_No) || \ - ((PARITY) == USART_Parity_Even) || \ - ((PARITY) == USART_Parity_Odd)) -/** - * @} - */ - -/** @defgroup USART_Mode - * @{ - */ - -#define USART_Mode_Rx ((uint16_t)0x0004) -#define USART_Mode_Tx ((uint16_t)0x0008) -#define IS_USART_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00)) -/** - * @} - */ - -/** @defgroup USART_Hardware_Flow_Control - * @{ - */ -#define USART_HardwareFlowControl_None ((uint16_t)0x0000) -#define USART_HardwareFlowControl_RTS ((uint16_t)0x0100) -#define USART_HardwareFlowControl_CTS ((uint16_t)0x0200) -#define USART_HardwareFlowControl_RTS_CTS ((uint16_t)0x0300) -#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)\ - (((CONTROL) == USART_HardwareFlowControl_None) || \ - ((CONTROL) == USART_HardwareFlowControl_RTS) || \ - ((CONTROL) == USART_HardwareFlowControl_CTS) || \ - ((CONTROL) == USART_HardwareFlowControl_RTS_CTS)) -/** - * @} - */ - -/** @defgroup USART_Clock - * @{ - */ -#define USART_Clock_Disable ((uint16_t)0x0000) -#define USART_Clock_Enable ((uint16_t)0x0800) -#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_Clock_Disable) || \ - ((CLOCK) == USART_Clock_Enable)) -/** - * @} - */ - -/** @defgroup USART_Clock_Polarity - * @{ - */ - -#define USART_CPOL_Low ((uint16_t)0x0000) -#define USART_CPOL_High ((uint16_t)0x0400) -#define IS_USART_CPOL(CPOL) (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High)) - -/** - * @} - */ - -/** @defgroup USART_Clock_Phase - * @{ - */ - -#define USART_CPHA_1Edge ((uint16_t)0x0000) -#define USART_CPHA_2Edge ((uint16_t)0x0200) -#define IS_USART_CPHA(CPHA) (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge)) - -/** - * @} - */ - -/** @defgroup USART_Last_Bit - * @{ - */ - -#define USART_LastBit_Disable ((uint16_t)0x0000) -#define USART_LastBit_Enable ((uint16_t)0x0100) -#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LastBit_Disable) || \ - ((LASTBIT) == USART_LastBit_Enable)) -/** - * @} - */ - -/** @defgroup USART_Interrupt_definition - * @{ - */ - -#define USART_IT_PE ((uint16_t)0x0028) -#define USART_IT_TXE ((uint16_t)0x0727) -#define USART_IT_TC ((uint16_t)0x0626) -#define USART_IT_RXNE ((uint16_t)0x0525) -#define USART_IT_IDLE ((uint16_t)0x0424) -#define USART_IT_LBD ((uint16_t)0x0846) -#define USART_IT_CTS ((uint16_t)0x096A) -#define USART_IT_ERR ((uint16_t)0x0060) -#define USART_IT_ORE ((uint16_t)0x0360) -#define USART_IT_NE ((uint16_t)0x0260) -#define USART_IT_FE ((uint16_t)0x0160) -#define IS_USART_CONFIG_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ - ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ - ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ - ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ERR)) -#define IS_USART_GET_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ - ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ - ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ - ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ORE) || \ - ((IT) == USART_IT_NE) || ((IT) == USART_IT_FE)) -#define IS_USART_CLEAR_IT(IT) (((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ - ((IT) == USART_IT_LBD) || ((IT) == USART_IT_CTS)) -/** - * @} - */ - -/** @defgroup USART_DMA_Requests - * @{ - */ - -#define USART_DMAReq_Tx ((uint16_t)0x0080) -#define USART_DMAReq_Rx ((uint16_t)0x0040) -#define IS_USART_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFF3F) == 0x00) && ((DMAREQ) != (uint16_t)0x00)) - -/** - * @} - */ - -/** @defgroup USART_WakeUp_methods - * @{ - */ - -#define USART_WakeUp_IdleLine ((uint16_t)0x0000) -#define USART_WakeUp_AddressMark ((uint16_t)0x0800) -#define IS_USART_WAKEUP(WAKEUP) (((WAKEUP) == USART_WakeUp_IdleLine) || \ - ((WAKEUP) == USART_WakeUp_AddressMark)) -/** - * @} - */ - -/** @defgroup USART_LIN_Break_Detection_Length - * @{ - */ - -#define USART_LINBreakDetectLength_10b ((uint16_t)0x0000) -#define USART_LINBreakDetectLength_11b ((uint16_t)0x0020) -#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH) \ - (((LENGTH) == USART_LINBreakDetectLength_10b) || \ - ((LENGTH) == USART_LINBreakDetectLength_11b)) -/** - * @} - */ - -/** @defgroup USART_IrDA_Low_Power - * @{ - */ - -#define USART_IrDAMode_LowPower ((uint16_t)0x0004) -#define USART_IrDAMode_Normal ((uint16_t)0x0000) -#define IS_USART_IRDA_MODE(MODE) (((MODE) == USART_IrDAMode_LowPower) || \ - ((MODE) == USART_IrDAMode_Normal)) -/** - * @} - */ - -/** @defgroup USART_Flags - * @{ - */ - -#define USART_FLAG_CTS ((uint16_t)0x0200) -#define USART_FLAG_LBD ((uint16_t)0x0100) -#define USART_FLAG_TXE ((uint16_t)0x0080) -#define USART_FLAG_TC ((uint16_t)0x0040) -#define USART_FLAG_RXNE ((uint16_t)0x0020) -#define USART_FLAG_IDLE ((uint16_t)0x0010) -#define USART_FLAG_ORE ((uint16_t)0x0008) -#define USART_FLAG_NE ((uint16_t)0x0004) -#define USART_FLAG_FE ((uint16_t)0x0002) -#define USART_FLAG_PE ((uint16_t)0x0001) -#define IS_USART_FLAG(FLAG) (((FLAG) == USART_FLAG_PE) || ((FLAG) == USART_FLAG_TXE) || \ - ((FLAG) == USART_FLAG_TC) || ((FLAG) == USART_FLAG_RXNE) || \ - ((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_LBD) || \ - ((FLAG) == USART_FLAG_CTS) || ((FLAG) == USART_FLAG_ORE) || \ - ((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE)) - -#define IS_USART_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFC9F) == 0x00) && ((FLAG) != (uint16_t)0x00)) -#define IS_USART_PERIPH_FLAG(PERIPH, USART_FLAG) ((((*(uint32_t*)&(PERIPH)) != UART4_BASE) &&\ - ((*(uint32_t*)&(PERIPH)) != UART5_BASE)) \ - || ((USART_FLAG) != USART_FLAG_CTS)) -#define IS_USART_BAUDRATE(BAUDRATE) (((BAUDRATE) > 0) && ((BAUDRATE) < 0x0044AA21)) -#define IS_USART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF) -#define IS_USART_DATA(DATA) ((DATA) <= 0x1FF) - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup USART_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup USART_Exported_Functions - * @{ - */ - -void USART_DeInit(USART_TypeDef* USARTx); -void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct); -void USART_StructInit(USART_InitTypeDef* USART_InitStruct); -void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct); -void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct); -void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState); -void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState); -void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address); -void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp); -void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength); -void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_SendData(USART_TypeDef* USARTx, uint16_t Data); -uint16_t USART_ReceiveData(USART_TypeDef* USARTx); -void USART_SendBreak(USART_TypeDef* USARTx); -void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime); -void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler); -void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode); -void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState); -FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG); -void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG); -ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT); -void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F10x_USART_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ |