diff options
Diffstat (limited to 'tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/RTC/LSI_Calib')
4 files changed, 0 insertions, 451 deletions
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/RTC/LSI_Calib/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/RTC/LSI_Calib/readme.txt deleted file mode 100644 index f465c39..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/RTC/LSI_Calib/readme.txt +++ /dev/null @@ -1,111 +0,0 @@ - -/** - @page RTC_LSI_Calib RTC LSI_Calib example - - @verbatim - ******************** (C) COPYRIGHT 2011 STMicroelectronics ******************* - * @file RTC/LSI_Calib/readme.txt - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Description of the RTC LSI_Calib example. - ****************************************************************************** - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - ****************************************************************************** - @endverbatim - -@par Example Description - -This example demonstrates and explains how to use the LSI clock source auto -calibration to get a precise RTC clock. -As an application example, it demonstrates how to configure the TIM5 timer -internally connected to LSI clock output, in order to adjust the RTC prescaler. - -The Low Speed External (LSI) clock is used as RTC clock source. -After reset, the RTC prescaler is set with the default value (40000). -The inaccuracy of the LSI clock causes the RTC Second signal to be inaccurate. This -signal is output on the Tamper pin (PC.13) and can be measured by on oscilloscope -or a frequencymeter. - -The program waits until Key Push button is pressed to begin the auto calibration procedure: - - Configure the TIM5 to remap internally the TIM5 Channel 4 Input Capture to the - LSI clock output. - - Enable the TIM5 Input Capture interrupt: after one cycle of LSI clock, the - period value is stored in a variable and compared to the HCLK clock to get - its real value. - - The RTC prescaler is adjusted with this LSI frequency value so that the RTC - Second value become more accurate. - - When calibration is done a led connected to PF.07 is turned ON to indicate the - end of this operation. At this moment, you can monitor the Second signal on - an oscilloscope to measure its accuracy again. - -The RTC Second signal can be monitored either on Tamper pin or on LED1 which is -toggled into the RTC Second interrupt service routine. - - -@par Directory contents - - - RTC/LSI_Calib/stm32f10x_conf.h Library Configuration file - - RTC/LSI_Calib/stm32f10x_it.c Interrupt handlers - - RTC/LSI_Calib/stm32f10x_it.h Header for stm32f10x_it.c - - RTC/LSI_Calib/main.h Main header file - - RTC/LSI_Calib/main.c Main program - - RTC/LSI_Calib/system_stm32f10x.c STM32F10x system source file - -@par Hardware and Software environment - - - This example runs on STM32F10x Connectivity line, High-Density Value line, - High-Density and XL-Density Devices. - - - This example has been tested with STMicroelectronics STM32100E-EVAL (High-Density - Value line), STM3210E-EVAL (High-Density and XL-Density) and STM3210C-EVAL - (Connectivity Line) evaluation boards and can be easily tailored to any other - supported device and development board. - To select the STMicroelectronics evaluation board used to run the example, - uncomment the corresponding line in stm32_eval.h file (under Utilities\STM32_EVAL) - - - STM32100E-EVAL Set-up - - Use LD1 and LD2 leds connected respectively to PF.06 and PF.07 pins - - Use the Key push button connected to PG.08 pin - - - STM3210C-EVAL Set-up - - Use LD1 and LD2 leds connected respectively to PD.07 and PD.13 pins - - Use the Key push-button connected to PB.09 pin - - - STM3210E-EVAL Set-up - - Use LD1 and LD2 leds connected respectively to PF.06 and PF.07 pins - - Use the Key push button connected to PG.08 pin - -@par How to use it ? - -In order to make the program work, you must do the following : - - Copy all source files from this example folder to the template folder under - Project\STM32F10x_StdPeriph_Template - - Open your preferred toolchain - - Rebuild all files and load your image into target memory - - Run the example - -@note - - Low-density Value line devices are STM32F100xx microcontrollers where the - Flash memory density ranges between 16 and 32 Kbytes. - - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx - microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes. - - Medium-density Value line devices are STM32F100xx microcontrollers where - the Flash memory density ranges between 64 and 128 Kbytes. - - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx - microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes. - - High-density Value line devices are STM32F100xx microcontrollers where - the Flash memory density ranges between 256 and 512 Kbytes. - - High-density devices are STM32F101xx and STM32F103xx microcontrollers where - the Flash memory density ranges between 256 and 512 Kbytes. - - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where - the Flash memory density ranges between 512 and 1024 Kbytes. - - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. - - * <h3><center>© COPYRIGHT 2011 STMicroelectronics</center></h3> - */ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/RTC/LSI_Calib/stm32f10x_conf.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/RTC/LSI_Calib/stm32f10x_conf.h deleted file mode 100644 index b6cd4ef..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/RTC/LSI_Calib/stm32f10x_conf.h +++ /dev/null @@ -1,77 +0,0 @@ -/** - ****************************************************************************** - * @file RTC/LSI_Calib/stm32f10x_conf.h - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Library configuration file. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_CONF_H -#define __STM32F10x_CONF_H - -/* Includes ------------------------------------------------------------------*/ -/* Uncomment/Comment the line below to enable/disable peripheral header file inclusion */ -#include "stm32f10x_adc.h" -#include "stm32f10x_bkp.h" -#include "stm32f10x_can.h" -#include "stm32f10x_cec.h" -#include "stm32f10x_crc.h" -#include "stm32f10x_dac.h" -#include "stm32f10x_dbgmcu.h" -#include "stm32f10x_dma.h" -#include "stm32f10x_exti.h" -#include "stm32f10x_flash.h" -#include "stm32f10x_fsmc.h" -#include "stm32f10x_gpio.h" -#include "stm32f10x_i2c.h" -#include "stm32f10x_iwdg.h" -#include "stm32f10x_pwr.h" -#include "stm32f10x_rcc.h" -#include "stm32f10x_rtc.h" -#include "stm32f10x_sdio.h" -#include "stm32f10x_spi.h" -#include "stm32f10x_tim.h" -#include "stm32f10x_usart.h" -#include "stm32f10x_wwdg.h" -#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Uncomment the line below to expanse the "assert_param" macro in the - Standard Peripheral Library drivers code */ -/* #define USE_FULL_ASSERT 1 */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT - -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function which reports - * the name of the source file and the source line number of the call - * that failed. If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0) -#endif /* USE_FULL_ASSERT */ - -#endif /* __STM32F10x_CONF_H */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/RTC/LSI_Calib/stm32f10x_it.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/RTC/LSI_Calib/stm32f10x_it.c deleted file mode 100644 index d9218cb..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/RTC/LSI_Calib/stm32f10x_it.c +++ /dev/null @@ -1,215 +0,0 @@ -/** - ****************************************************************************** - * @file RTC/LSI_Calib/stm32f10x_it.c - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Main Interrupt Service Routines. - * This file provides template for all exceptions handler and peripherals - * interrupt service routine. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_it.h" -#include "main.h" - -/** @addtogroup STM32F10x_StdPeriph_Examples - * @{ - */ - -/** @addtogroup RTC_LSI_Calib - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -uint16_t tmpCC4[2] = {0, 0}; - -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************/ -/* Cortex-M3 Processor Exceptions Handlers */ -/******************************************************************************/ - -/** - * @brief This function handles NMI exception. - * @param None - * @retval None - */ -void NMI_Handler(void) -{ -} - -/** - * @brief This function handles Hard Fault exception. - * @param None - * @retval None - */ -void HardFault_Handler(void) -{ - /* Go to infinite loop when Hard Fault exception occurs */ - while (1) - {} -} - -/** - * @brief This function handles Memory Manage exception. - * @param None - * @retval None - */ -void MemManage_Handler(void) -{ - /* Go to infinite loop when Memory Manage exception occurs */ - while (1) - {} -} - -/** - * @brief This function handles Bus Fault exception. - * @param None - * @retval None - */ -void BusFault_Handler(void) -{ - /* Go to infinite loop when Bus Fault exception occurs */ - while (1) - {} -} - -/** - * @brief This function handles Usage Fault exception. - * @param None - * @retval None - */ -void UsageFault_Handler(void) -{ - /* Go to infinite loop when Usage Fault exception occurs */ - while (1) - {} -} - -/** - * @brief This function handles Debug Monitor exception. - * @param None - * @retval None - */ -void DebugMon_Handler(void) -{ -} - -/** - * @brief This function handles SVCall exception. - * @param None - * @retval None - */ -void SVC_Handler(void) -{ -} - -/** - * @brief This function handles PendSV_Handler exception. - * @param None - * @retval None - */ -void PendSV_Handler(void) -{ -} - -/** - * @brief This function handles SysTick Handler. - * @param None - * @retval None - */ -void SysTick_Handler(void) -{ -} - -/******************************************************************************/ -/* STM32F10x Peripherals Interrupt Handlers */ -/******************************************************************************/ - -/** - * @brief This function handles RTC global interrupt request. - * @param None - * @retval None - */ -void RTC_IRQHandler(void) -{ - if (RTC_GetITStatus(RTC_IT_SEC) != RESET) - { - /* Toggle LED1 */ - STM_EVAL_LEDToggle(LED1); - - /* Clear Interrupt pending bit */ - RTC_ClearITPendingBit(RTC_FLAG_SEC); - } -} - -/** - * @brief This function handles TIM5 global interrupt request. - * @param None - * @retval None - */ -void TIM5_IRQHandler(void) -{ - uint32_t tmp = 0; - - if (TIM_GetITStatus(TIM5, TIM_IT_CC4) == SET) - { - tmpCC4[IncrementVar_OperationComplete()] = (uint16_t)(TIM5->CCR4); - - TIM_ClearITPendingBit(TIM5, TIM_IT_CC4); - - if (GetVar_OperationComplete() >= 2) - { - /* Compute the period length */ - tmp = (uint16_t)(tmpCC4[1] - tmpCC4[0] + 1); - SetVar_PeriodValue(tmp); - - /* Disable the interrupt */ - TIM_ITConfig(TIM5, TIM_IT_CC4, DISABLE); - TIM_Cmd(TIM5, DISABLE); - } - } -} - -/******************************************************************************/ -/* STM32F10x Peripherals Interrupt Handlers */ -/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */ -/* available peripheral interrupt handler's name please refer to the startup */ -/* file (startup_stm32f10x_xx.s). */ -/******************************************************************************/ - -/** - * @brief This function handles PPP interrupt request. - * @param None - * @retval None - */ -/*void PPP_IRQHandler(void) -{ -}*/ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/RTC/LSI_Calib/stm32f10x_it.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/RTC/LSI_Calib/stm32f10x_it.h deleted file mode 100644 index 9131767..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/RTC/LSI_Calib/stm32f10x_it.h +++ /dev/null @@ -1,48 +0,0 @@ -/** - ****************************************************************************** - * @file RTC/LSI_Calib/stm32f10x_it.h - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief This file contains the headers of the interrupt handlers. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_IT_H -#define __STM32F10x_IT_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -void NMI_Handler(void); -void HardFault_Handler(void); -void MemManage_Handler(void); -void BusFault_Handler(void); -void UsageFault_Handler(void); -void SVC_Handler(void); -void DebugMon_Handler(void); -void PendSV_Handler(void); -void SysTick_Handler(void); -void RTC_IRQHandler(void); -void TIM5_IRQHandler(void); - -#endif /* __STM32F10x_IT_H */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ |