diff options
Diffstat (limited to 'tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/IrDA/Receive')
2 files changed, 0 insertions, 300 deletions
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/IrDA/Receive/main.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/IrDA/Receive/main.c deleted file mode 100644 index 6ce1d06..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/IrDA/Receive/main.c +++ /dev/null @@ -1,224 +0,0 @@ -/** - ****************************************************************************** - * @file USART/IrDA/Receive/main.c - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Main program body - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" -#include "platform_config.h" - -/** @addtogroup STM32F10x_StdPeriph_Examples - * @{ - */ - -/** @addtogroup USART_IrDA_Receive - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -USART_InitTypeDef USART_InitStructure; -JOYState_TypeDef ReceivedData = JOY_NONE; - -/* Private function prototypes -----------------------------------------------*/ -void RCC_Configuration(void); -void GPIO_Configuration(void); - -/* Private functions ---------------------------------------------------------*/ - -/** - * @brief Main program - * @param None - * @retval None - */ -int main(void) -{ - /*!< At this stage the microcontroller clock setting is already configured, - this is done through SystemInit() function which is called from startup - file (startup_stm32f10x_xx.s) before to branch to application main. - To reconfigure the default setting of SystemInit() function, refer to - system_stm32f10x.c file - */ - - /* System Clocks Configuration */ - RCC_Configuration(); - - /* Configure the GPIO ports */ - GPIO_Configuration(); - - /* Initialize Leds mounted on STM3210X-EVAL board */ - STM_EVAL_LEDInit(LED1); - STM_EVAL_LEDInit(LED2); - STM_EVAL_LEDInit(LED3); - STM_EVAL_LEDInit(LED4); - -/* USARTy configuration ------------------------------------------------------*/ - /* USARTy configured as follow: - - BaudRate = 115200 baud - - Word Length = 8 Bits - - One Stop Bit - - No parity - - Hardware flow control disabled (RTS and CTS signals) - - Receive and transmit enabled - */ - USART_InitStructure.USART_BaudRate = 115200; - USART_InitStructure.USART_WordLength = USART_WordLength_8b; - USART_InitStructure.USART_StopBits = USART_StopBits_1; - USART_InitStructure.USART_Parity = USART_Parity_No ; - USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; - USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; - - /* Configure the USARTy */ - USART_Init(USARTy, &USART_InitStructure); - /* Enable the USARTy */ - USART_Cmd(USARTy, ENABLE); - - /* Set the USARTy prescaler */ - USART_SetPrescaler(USARTy, 0x1); - /* Configure the USARTy IrDA mode */ - USART_IrDAConfig(USARTy, USART_IrDAMode_Normal); - - /* Enable the USARTy IrDA mode */ - USART_IrDACmd(USARTy, ENABLE); - - while (1) - { - /* Wait until a byte is received */ - while(USART_GetFlagStatus(USARTy, USART_FLAG_RXNE) == RESET) - { - } - /* Read the received byte */ - ReceivedData = (JOYState_TypeDef)USART_ReceiveData(USARTy); - - switch(ReceivedData) - { - case JOY_UP: - STM_EVAL_LEDOn(LED1); - STM_EVAL_LEDOff(LED2); - STM_EVAL_LEDOff(LED3); - STM_EVAL_LEDOff(LED4); - break; - case JOY_DOWN: - STM_EVAL_LEDOn(LED2); - STM_EVAL_LEDOff(LED1); - STM_EVAL_LEDOff(LED3); - STM_EVAL_LEDOff(LED4); - break; - case JOY_LEFT: - STM_EVAL_LEDOn(LED3); - STM_EVAL_LEDOff(LED1); - STM_EVAL_LEDOff(LED2); - STM_EVAL_LEDOff(LED4); - break; - case JOY_RIGHT: - STM_EVAL_LEDOn(LED4); - STM_EVAL_LEDOff(LED1); - STM_EVAL_LEDOff(LED2); - STM_EVAL_LEDOff(LED3); - break; - case JOY_SEL: - STM_EVAL_LEDOn(LED1); - STM_EVAL_LEDOn(LED2); - STM_EVAL_LEDOn(LED3); - STM_EVAL_LEDOn(LED4); - break; - case JOY_NONE: - break; - default: - break; - } - } -} - -/** - * @brief Configures the different system clocks. - * @param None - * @retval None - */ -void RCC_Configuration(void) -{ - /* Enable GPIO clock */ - RCC_APB2PeriphClockCmd(USARTy_GPIO_CLK | RCC_APB2Periph_AFIO, ENABLE); - - /* Enable USARTy clocks */ - RCC_APB1PeriphClockCmd(USARTy_CLK, ENABLE); -} - -/** - * @brief Configures the different GPIO ports. - * @param None - * @retval None - */ -void GPIO_Configuration(void) -{ - GPIO_InitTypeDef GPIO_InitStructure; - -#ifndef USE_STM3210C_EVAL - /* Enable the USART3 Pins Partial Software Remapping */ - GPIO_PinRemapConfig(GPIO_PartialRemap_USART3, ENABLE); -#else - /* Enable the USART2 Pins Software Remapping */ - GPIO_PinRemapConfig(GPIO_Remap_USART2, ENABLE); -#endif - - /* Configure USARTy Tx as alternate function push-pull */ - GPIO_InitStructure.GPIO_Pin = USARTy_TxPin; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; - GPIO_Init(USARTy_GPIO, &GPIO_InitStructure); - - /* Configure USARTy Rx as input floating */ - GPIO_InitStructure.GPIO_Pin = USARTy_RxPin; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_Init(USARTy_GPIO, &GPIO_InitStructure); -} - -#ifdef USE_FULL_ASSERT - -/** - * @brief Reports the name of the source file and the source line number - * where the assert_param error has occurred. - * @param file: pointer to the source file name - * @param line: assert_param error line source number - * @retval None - */ -void assert_failed(uint8_t* file, uint32_t line) -{ - /* User can add his own implementation to report the file name and line number, - ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - - /* Infinite loop */ - while (1) - { - } -} - -#endif - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/IrDA/Receive/platform_config.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/IrDA/Receive/platform_config.h deleted file mode 100644 index 4b77212..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/IrDA/Receive/platform_config.h +++ /dev/null @@ -1,76 +0,0 @@ -/** - ****************************************************************************** - * @file USART/IrDA/Receive/platform_config.h - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Evaluation board specific configuration file. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __PLATFORM_CONFIG_H -#define __PLATFORM_CONFIG_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32_eval.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Uncomment the line corresponding to the STMicroelectronics evaluation board - used to run the example */ -#if !defined (USE_STM32100B_EVAL) && !defined (USE_STM3210B_EVAL) && !defined (USE_STM32100E_EVAL) && !defined (USE_STM3210E_EVAL) && !defined (USE_STM3210C_EVAL) - //#define USE_STM32100B_EVAL - //#define USE_STM3210B_EVAL - //#define USE_STM3210E_EVAL - //#define USE_STM32100E_EVAL - #define USE_STM3210C_EVAL -#endif - -/* Define the STM32F10x hardware depending on the used evaluation board */ -#if defined(USE_STM3210B_EVAL) || defined (USE_STM32100B_EVAL) - - #define USARTy USART3 - #define USARTy_GPIO GPIOC - #define USARTy_CLK RCC_APB1Periph_USART3 - #define USARTy_GPIO_CLK RCC_APB2Periph_GPIOC - #define USARTy_RxPin GPIO_Pin_11 - #define USARTy_TxPin GPIO_Pin_10 - -#elif defined USE_STM3210E_EVAL || defined USE_STM32100E_EVAL - - #define USARTy USART3 - #define USARTy_GPIO GPIOC - #define USARTy_CLK RCC_APB1Periph_USART3 - #define USARTy_GPIO_CLK RCC_APB2Periph_GPIOC - #define USARTy_RxPin GPIO_Pin_11 - #define USARTy_TxPin GPIO_Pin_10 - -#elif defined USE_STM3210C_EVAL - - #define USARTy USART2 - #define USARTy_GPIO GPIOD - #define USARTy_CLK RCC_APB1Periph_USART2 - #define USARTy_GPIO_CLK RCC_APB2Periph_GPIOD - #define USARTy_RxPin GPIO_Pin_6 - #define USARTy_TxPin GPIO_Pin_5 - -#endif /* USE_STM3210B_EVAL */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -#endif /* __PLATFORM_CONFIG_H */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ |