diff options
Diffstat (limited to 'stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h')
-rw-r--r-- | stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h | 238 |
1 files changed, 0 insertions, 238 deletions
diff --git a/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h b/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h deleted file mode 100644 index 7bd9429..0000000 --- a/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h +++ /dev/null @@ -1,238 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx.h - * @author MCD Application Team - * @version V4.1.0 - * @date 29-April-2016 - * @brief CMSIS STM32F1xx Device Peripheral Access Layer Header File. - * - * The file is the unique include file that the application programmer - * is using in the C source code, usually in main.c. This file contains: - * - Configuration section that allows to select: - * - The STM32F1xx device used in the target application - * - To use or not the peripheral’s drivers in application code(i.e. - * code will be based on direct access to peripheral’s registers - * rather than drivers API), this option is controlled by - * "#define USE_HAL_DRIVER" - * - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/** @addtogroup CMSIS - * @{ - */ - -/** @addtogroup stm32f1xx - * @{ - */ - -#ifndef __STM32F1XX_H -#define __STM32F1XX_H - -#ifdef __cplusplus - extern "C" { -#endif /* __cplusplus */ - -/** @addtogroup Library_configuration_section - * @{ - */ - -/** - * @brief STM32 Family - */ -#if !defined (STM32F1) -#define STM32F1 -#endif /* STM32F1 */ - -/* Uncomment the line below according to the target STM32L device used in your - application - */ - -#if !defined (STM32F100xB) && !defined (STM32F100xE) && !defined (STM32F101x6) && \ - !defined (STM32F101xB) && !defined (STM32F101xE) && !defined (STM32F101xG) && !defined (STM32F102x6) && !defined (STM32F102xB) && !defined (STM32F103x6) && \ - !defined (STM32F103xB) && !defined (STM32F103xE) && !defined (STM32F103xG) && !defined (STM32F105xC) && !defined (STM32F107xC) - /* #define STM32F100xB */ /*!< STM32F100C4, STM32F100R4, STM32F100C6, STM32F100R6, STM32F100C8, STM32F100R8, STM32F100V8, STM32F100CB, STM32F100RB and STM32F100VB */ - /* #define STM32F100xE */ /*!< STM32F100RC, STM32F100VC, STM32F100ZC, STM32F100RD, STM32F100VD, STM32F100ZD, STM32F100RE, STM32F100VE and STM32F100ZE */ - /* #define STM32F101x6 */ /*!< STM32F101C4, STM32F101R4, STM32F101T4, STM32F101C6, STM32F101R6 and STM32F101T6 Devices */ - /* #define STM32F101xB */ /*!< STM32F101C8, STM32F101R8, STM32F101T8, STM32F101V8, STM32F101CB, STM32F101RB, STM32F101TB and STM32F101VB */ - /* #define STM32F101xE */ /*!< STM32F101RC, STM32F101VC, STM32F101ZC, STM32F101RD, STM32F101VD, STM32F101ZD, STM32F101RE, STM32F101VE and STM32F101ZE */ - /* #define STM32F101xG */ /*!< STM32F101RF, STM32F101VF, STM32F101ZF, STM32F101RG, STM32F101VG and STM32F101ZG */ - /* #define STM32F102x6 */ /*!< STM32F102C4, STM32F102R4, STM32F102C6 and STM32F102R6 */ - /* #define STM32F102xB */ /*!< STM32F102C8, STM32F102R8, STM32F102CB and STM32F102RB */ - /* #define STM32F103x6 */ /*!< STM32F103C4, STM32F103R4, STM32F103T4, STM32F103C6, STM32F103R6 and STM32F103T6 */ - /* #define STM32F103xB */ /*!< STM32F103C8, STM32F103R8, STM32F103T8, STM32F103V8, STM32F103CB, STM32F103RB, STM32F103TB and STM32F103VB */ - /* #define STM32F103xE */ /*!< STM32F103RC, STM32F103VC, STM32F103ZC, STM32F103RD, STM32F103VD, STM32F103ZD, STM32F103RE, STM32F103VE and STM32F103ZE */ - /* #define STM32F103xG */ /*!< STM32F103RF, STM32F103VF, STM32F103ZF, STM32F103RG, STM32F103VG and STM32F103ZG */ - /* #define STM32F105xC */ /*!< STM32F105R8, STM32F105V8, STM32F105RB, STM32F105VB, STM32F105RC and STM32F105VC */ - /* #define STM32F107xC */ /*!< STM32F107RB, STM32F107VB, STM32F107RC and STM32F107VC */ -#endif - -/* Tip: To avoid modifying this file each time you need to switch between these - devices, you can define the device in your toolchain compiler preprocessor. - */ - -#if !defined (USE_HAL_DRIVER) -/** - * @brief Comment the line below if you will not use the peripherals drivers. - In this case, these drivers will not be included and the application code will - be based on direct access to peripherals registers - */ - /*#define USE_HAL_DRIVER */ -#endif /* USE_HAL_DRIVER */ - -/** - * @brief CMSIS Device version number - */ -#define __STM32F1_CMSIS_VERSION_MAIN (0x04) /*!< [31:24] main version */ -#define __STM32F1_CMSIS_VERSION_SUB1 (0x01) /*!< [23:16] sub1 version */ -#define __STM32F1_CMSIS_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */ -#define __STM32F1_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */ -#define __STM32F1_CMSIS_VERSION ((__STM32F1_CMSIS_VERSION_MAIN << 24)\ - |(__STM32F1_CMSIS_VERSION_SUB1 << 16)\ - |(__STM32F1_CMSIS_VERSION_SUB2 << 8 )\ - |(__STM32F1_CMSIS_VERSION_RC)) - -/** - * @} - */ - -/** @addtogroup Device_Included - * @{ - */ - -#if defined(STM32F100xB) - #include "stm32f100xb.h" -#elif defined(STM32F100xE) - #include "stm32f100xe.h" -#elif defined(STM32F101x6) - #include "stm32f101x6.h" -#elif defined(STM32F101xB) - #include "stm32f101xb.h" -#elif defined(STM32F101xE) - #include "stm32f101xe.h" -#elif defined(STM32F101xG) - #include "stm32f101xg.h" -#elif defined(STM32F102x6) - #include "stm32f102x6.h" -#elif defined(STM32F102xB) - #include "stm32f102xb.h" -#elif defined(STM32F103x6) - #include "stm32f103x6.h" -#elif defined(STM32F103xB) - #include "stm32f103xb.h" -#elif defined(STM32F103xE) - #include "stm32f103xe.h" -#elif defined(STM32F103xG) - #include "stm32f103xg.h" -#elif defined(STM32F105xC) - #include "stm32f105xc.h" -#elif defined(STM32F107xC) - #include "stm32f107xc.h" -#else - #error "Please select first the target STM32F1xx device used in your application (in stm32f1xx.h file)" -#endif - -/** - * @} - */ - -/** @addtogroup Exported_types - * @{ - */ -typedef enum -{ - RESET = 0, - SET = !RESET -} FlagStatus, ITStatus; - -typedef enum -{ - DISABLE = 0, - ENABLE = !DISABLE -} FunctionalState; -#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) - -typedef enum -{ - ERROR = 0, - SUCCESS = !ERROR -} ErrorStatus; - -/** - * @} - */ - - -/** @addtogroup Exported_macros - * @{ - */ -#define SET_BIT(REG, BIT) ((REG) |= (BIT)) - -#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) - -#define READ_BIT(REG, BIT) ((REG) & (BIT)) - -#define CLEAR_REG(REG) ((REG) = (0x0)) - -#define WRITE_REG(REG, VAL) ((REG) = (VAL)) - -#define READ_REG(REG) ((REG)) - -#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) - -#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL))) - - -/** - * @} - */ - -#if defined (USE_HAL_DRIVER) - #include "stm32f1xx_hal.h" -#endif /* USE_HAL_DRIVER */ - - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif /* __STM32F1xx_H */ -/** - * @} - */ - -/** - * @} - */ - - - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |