summaryrefslogtreecommitdiff
path: root/stm32cubemx/Drivers
diff options
context:
space:
mode:
Diffstat (limited to 'stm32cubemx/Drivers')
-rw-r--r--stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103x6.h10944
-rw-r--r--stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h238
-rw-r--r--stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h116
-rw-r--r--stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c448
-rw-r--r--stm32cubemx/Drivers/CMSIS/Include/arm_common_tables.h136
-rw-r--r--stm32cubemx/Drivers/CMSIS/Include/arm_const_structs.h79
-rw-r--r--stm32cubemx/Drivers/CMSIS/Include/arm_math.h7154
-rw-r--r--stm32cubemx/Drivers/CMSIS/Include/cmsis_armcc.h734
-rw-r--r--stm32cubemx/Drivers/CMSIS/Include/cmsis_armcc_V6.h1800
-rw-r--r--stm32cubemx/Drivers/CMSIS/Include/cmsis_gcc.h1373
-rw-r--r--stm32cubemx/Drivers/CMSIS/Include/core_cm0.h798
-rw-r--r--stm32cubemx/Drivers/CMSIS/Include/core_cm0plus.h914
-rw-r--r--stm32cubemx/Drivers/CMSIS/Include/core_cm3.h1763
-rw-r--r--stm32cubemx/Drivers/CMSIS/Include/core_cm4.h1937
-rw-r--r--stm32cubemx/Drivers/CMSIS/Include/core_cm7.h2512
-rw-r--r--stm32cubemx/Drivers/CMSIS/Include/core_cmFunc.h87
-rw-r--r--stm32cubemx/Drivers/CMSIS/Include/core_cmInstr.h87
-rw-r--r--stm32cubemx/Drivers/CMSIS/Include/core_cmSimd.h96
-rw-r--r--stm32cubemx/Drivers/CMSIS/Include/core_sc000.h926
-rw-r--r--stm32cubemx/Drivers/CMSIS/Include/core_sc300.h1745
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h3123
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h328
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h476
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h214
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h480
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h260
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h348
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h804
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h324
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h887
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h853
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h116
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h406
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h1395
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h1926
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h1767
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h312
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h751
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h616
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c526
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c494
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c709
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c974
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c1140
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c597
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c145
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c1440
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c252
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c636
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c1270
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c870
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c5379
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c1857
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c1921
-rw-r--r--stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c2211
55 files changed, 0 insertions, 69694 deletions
diff --git a/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103x6.h b/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103x6.h
deleted file mode 100644
index 405f697..0000000
--- a/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103x6.h
+++ /dev/null
@@ -1,10944 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f103x6.h
- * @author MCD Application Team
- * @version V4.1.0
- * @date 29-April-2016
- * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File.
- * This file contains all the peripheral register's definitions, bits
- * definitions and memory mapping for STM32F1xx devices.
- *
- * This file contains:
- * - Data structures and the address mapping for all peripherals
- * - Peripheral's registers declarations and bits definition
- * - Macros to access peripheral’s registers hardware
- *
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-
-/** @addtogroup CMSIS
- * @{
- */
-
-/** @addtogroup stm32f103x6
- * @{
- */
-
-#ifndef __STM32F103x6_H
-#define __STM32F103x6_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/** @addtogroup Configuration_section_for_CMSIS
- * @{
- */
-/**
- * @brief Configuration of the Cortex-M3 Processor and Core Peripherals
- */
- #define __MPU_PRESENT 0 /*!< Other STM32 devices does not provide an MPU */
-#define __CM3_REV 0x0200 /*!< Core Revision r2p0 */
-#define __NVIC_PRIO_BITS 4 /*!< STM32 uses 4 Bits for the Priority Levels */
-#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
-
-/**
- * @}
- */
-
-/** @addtogroup Peripheral_interrupt_number_definition
- * @{
- */
-
-/**
- * @brief STM32F10x Interrupt Number Definition, according to the selected device
- * in @ref Library_configuration_section
- */
-
- /*!< Interrupt Number Definition */
-typedef enum
-{
-/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/
- NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
- HardFault_IRQn = -13, /*!< 3 Cortex-M3 Hard Fault Interrupt */
- MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */
- BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */
- UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */
- SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */
- DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */
- PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */
- SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */
-
-/****** STM32 specific Interrupt Numbers *********************************************************/
- WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
- PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
- TAMPER_IRQn = 2, /*!< Tamper Interrupt */
- RTC_IRQn = 3, /*!< RTC global Interrupt */
- FLASH_IRQn = 4, /*!< FLASH global Interrupt */
- RCC_IRQn = 5, /*!< RCC global Interrupt */
- EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
- EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
- EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */
- EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
- EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
- DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */
- DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */
- DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */
- DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */
- DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */
- DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */
- DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */
- ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */
- USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */
- USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */
- CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */
- CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */
- EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
- TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */
- TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */
- TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */
- TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
- TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
- TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
- I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
- I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
- SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
- USART1_IRQn = 37, /*!< USART1 global Interrupt */
- USART2_IRQn = 38, /*!< USART2 global Interrupt */
- EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
- RTC_Alarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */
- USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */
-} IRQn_Type;
-
-
-/**
- * @}
- */
-
-#include "core_cm3.h"
-#include "system_stm32f1xx.h"
-#include <stdint.h>
-
-/** @addtogroup Peripheral_registers_structures
- * @{
- */
-
-/**
- * @brief Analog to Digital Converter
- */
-
-typedef struct
-{
- __IO uint32_t SR;
- __IO uint32_t CR1;
- __IO uint32_t CR2;
- __IO uint32_t SMPR1;
- __IO uint32_t SMPR2;
- __IO uint32_t JOFR1;
- __IO uint32_t JOFR2;
- __IO uint32_t JOFR3;
- __IO uint32_t JOFR4;
- __IO uint32_t HTR;
- __IO uint32_t LTR;
- __IO uint32_t SQR1;
- __IO uint32_t SQR2;
- __IO uint32_t SQR3;
- __IO uint32_t JSQR;
- __IO uint32_t JDR1;
- __IO uint32_t JDR2;
- __IO uint32_t JDR3;
- __IO uint32_t JDR4;
- __IO uint32_t DR;
-} ADC_TypeDef;
-
-typedef struct
-{
- __IO uint32_t SR; /*!< ADC status register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address */
- __IO uint32_t CR1; /*!< ADC control register 1, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x04 */
- __IO uint32_t CR2; /*!< ADC control register 2, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x08 */
- uint32_t RESERVED[16];
- __IO uint32_t DR; /*!< ADC data register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x4C */
-} ADC_Common_TypeDef;
-
-/**
- * @brief Backup Registers
- */
-
-typedef struct
-{
- uint32_t RESERVED0;
- __IO uint32_t DR1;
- __IO uint32_t DR2;
- __IO uint32_t DR3;
- __IO uint32_t DR4;
- __IO uint32_t DR5;
- __IO uint32_t DR6;
- __IO uint32_t DR7;
- __IO uint32_t DR8;
- __IO uint32_t DR9;
- __IO uint32_t DR10;
- __IO uint32_t RTCCR;
- __IO uint32_t CR;
- __IO uint32_t CSR;
-} BKP_TypeDef;
-
-/**
- * @brief Controller Area Network TxMailBox
- */
-
-typedef struct
-{
- __IO uint32_t TIR;
- __IO uint32_t TDTR;
- __IO uint32_t TDLR;
- __IO uint32_t TDHR;
-} CAN_TxMailBox_TypeDef;
-
-/**
- * @brief Controller Area Network FIFOMailBox
- */
-
-typedef struct
-{
- __IO uint32_t RIR;
- __IO uint32_t RDTR;
- __IO uint32_t RDLR;
- __IO uint32_t RDHR;
-} CAN_FIFOMailBox_TypeDef;
-
-/**
- * @brief Controller Area Network FilterRegister
- */
-
-typedef struct
-{
- __IO uint32_t FR1;
- __IO uint32_t FR2;
-} CAN_FilterRegister_TypeDef;
-
-/**
- * @brief Controller Area Network
- */
-
-typedef struct
-{
- __IO uint32_t MCR;
- __IO uint32_t MSR;
- __IO uint32_t TSR;
- __IO uint32_t RF0R;
- __IO uint32_t RF1R;
- __IO uint32_t IER;
- __IO uint32_t ESR;
- __IO uint32_t BTR;
- uint32_t RESERVED0[88];
- CAN_TxMailBox_TypeDef sTxMailBox[3];
- CAN_FIFOMailBox_TypeDef sFIFOMailBox[2];
- uint32_t RESERVED1[12];
- __IO uint32_t FMR;
- __IO uint32_t FM1R;
- uint32_t RESERVED2;
- __IO uint32_t FS1R;
- uint32_t RESERVED3;
- __IO uint32_t FFA1R;
- uint32_t RESERVED4;
- __IO uint32_t FA1R;
- uint32_t RESERVED5[8];
- CAN_FilterRegister_TypeDef sFilterRegister[14];
-} CAN_TypeDef;
-
-/**
- * @brief CRC calculation unit
- */
-
-typedef struct
-{
- __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
- __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
- uint8_t RESERVED0; /*!< Reserved, Address offset: 0x05 */
- uint16_t RESERVED1; /*!< Reserved, Address offset: 0x06 */
- __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
-} CRC_TypeDef;
-
-
-/**
- * @brief Debug MCU
- */
-
-typedef struct
-{
- __IO uint32_t IDCODE;
- __IO uint32_t CR;
-}DBGMCU_TypeDef;
-
-/**
- * @brief DMA Controller
- */
-
-typedef struct
-{
- __IO uint32_t CCR;
- __IO uint32_t CNDTR;
- __IO uint32_t CPAR;
- __IO uint32_t CMAR;
-} DMA_Channel_TypeDef;
-
-typedef struct
-{
- __IO uint32_t ISR;
- __IO uint32_t IFCR;
-} DMA_TypeDef;
-
-
-
-/**
- * @brief External Interrupt/Event Controller
- */
-
-typedef struct
-{
- __IO uint32_t IMR;
- __IO uint32_t EMR;
- __IO uint32_t RTSR;
- __IO uint32_t FTSR;
- __IO uint32_t SWIER;
- __IO uint32_t PR;
-} EXTI_TypeDef;
-
-/**
- * @brief FLASH Registers
- */
-
-typedef struct
-{
- __IO uint32_t ACR;
- __IO uint32_t KEYR;
- __IO uint32_t OPTKEYR;
- __IO uint32_t SR;
- __IO uint32_t CR;
- __IO uint32_t AR;
- __IO uint32_t RESERVED;
- __IO uint32_t OBR;
- __IO uint32_t WRPR;
-} FLASH_TypeDef;
-
-/**
- * @brief Option Bytes Registers
- */
-
-typedef struct
-{
- __IO uint16_t RDP;
- __IO uint16_t USER;
- __IO uint16_t Data0;
- __IO uint16_t Data1;
- __IO uint16_t WRP0;
- __IO uint16_t WRP1;
- __IO uint16_t WRP2;
- __IO uint16_t WRP3;
-} OB_TypeDef;
-
-/**
- * @brief General Purpose I/O
- */
-
-typedef struct
-{
- __IO uint32_t CRL;
- __IO uint32_t CRH;
- __IO uint32_t IDR;
- __IO uint32_t ODR;
- __IO uint32_t BSRR;
- __IO uint32_t BRR;
- __IO uint32_t LCKR;
-} GPIO_TypeDef;
-
-/**
- * @brief Alternate Function I/O
- */
-
-typedef struct
-{
- __IO uint32_t EVCR;
- __IO uint32_t MAPR;
- __IO uint32_t EXTICR[4];
- uint32_t RESERVED0;
- __IO uint32_t MAPR2;
-} AFIO_TypeDef;
-/**
- * @brief Inter Integrated Circuit Interface
- */
-
-typedef struct
-{
- __IO uint32_t CR1;
- __IO uint32_t CR2;
- __IO uint32_t OAR1;
- __IO uint32_t OAR2;
- __IO uint32_t DR;
- __IO uint32_t SR1;
- __IO uint32_t SR2;
- __IO uint32_t CCR;
- __IO uint32_t TRISE;
-} I2C_TypeDef;
-
-/**
- * @brief Independent WATCHDOG
- */
-
-typedef struct
-{
- __IO uint32_t KR; /*!< Key register, Address offset: 0x00 */
- __IO uint32_t PR; /*!< Prescaler register, Address offset: 0x04 */
- __IO uint32_t RLR; /*!< Reload register, Address offset: 0x08 */
- __IO uint32_t SR; /*!< Status register, Address offset: 0x0C */
-} IWDG_TypeDef;
-
-/**
- * @brief Power Control
- */
-
-typedef struct
-{
- __IO uint32_t CR;
- __IO uint32_t CSR;
-} PWR_TypeDef;
-
-/**
- * @brief Reset and Clock Control
- */
-
-typedef struct
-{
- __IO uint32_t CR;
- __IO uint32_t CFGR;
- __IO uint32_t CIR;
- __IO uint32_t APB2RSTR;
- __IO uint32_t APB1RSTR;
- __IO uint32_t AHBENR;
- __IO uint32_t APB2ENR;
- __IO uint32_t APB1ENR;
- __IO uint32_t BDCR;
- __IO uint32_t CSR;
-
-
-} RCC_TypeDef;
-
-/**
- * @brief Real-Time Clock
- */
-
-typedef struct
-{
- __IO uint32_t CRH;
- __IO uint32_t CRL;
- __IO uint32_t PRLH;
- __IO uint32_t PRLL;
- __IO uint32_t DIVH;
- __IO uint32_t DIVL;
- __IO uint32_t CNTH;
- __IO uint32_t CNTL;
- __IO uint32_t ALRH;
- __IO uint32_t ALRL;
-} RTC_TypeDef;
-
-/**
- * @brief SD host Interface
- */
-
-typedef struct
-{
- __IO uint32_t POWER;
- __IO uint32_t CLKCR;
- __IO uint32_t ARG;
- __IO uint32_t CMD;
- __I uint32_t RESPCMD;
- __I uint32_t RESP1;
- __I uint32_t RESP2;
- __I uint32_t RESP3;
- __I uint32_t RESP4;
- __IO uint32_t DTIMER;
- __IO uint32_t DLEN;
- __IO uint32_t DCTRL;
- __I uint32_t DCOUNT;
- __I uint32_t STA;
- __IO uint32_t ICR;
- __IO uint32_t MASK;
- uint32_t RESERVED0[2];
- __I uint32_t FIFOCNT;
- uint32_t RESERVED1[13];
- __IO uint32_t FIFO;
-} SDIO_TypeDef;
-
-/**
- * @brief Serial Peripheral Interface
- */
-
-typedef struct
-{
- __IO uint32_t CR1;
- __IO uint32_t CR2;
- __IO uint32_t SR;
- __IO uint32_t DR;
- __IO uint32_t CRCPR;
- __IO uint32_t RXCRCR;
- __IO uint32_t TXCRCR;
- __IO uint32_t I2SCFGR;
-} SPI_TypeDef;
-
-/**
- * @brief TIM Timers
- */
-typedef struct
-{
- __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
- __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
- __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */
- __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
- __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
- __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
- __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
- __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
- __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
- __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
- __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */
- __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
- __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
- __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
- __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
- __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
- __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
- __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
- __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
- __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */
- __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
-}TIM_TypeDef;
-
-
-/**
- * @brief Universal Synchronous Asynchronous Receiver Transmitter
- */
-
-typedef struct
-{
- __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */
- __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */
- __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */
- __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */
- __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */
- __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */
- __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */
-} USART_TypeDef;
-
-/**
- * @brief Universal Serial Bus Full Speed Device
- */
-
-typedef struct
-{
- __IO uint16_t EP0R; /*!< USB Endpoint 0 register, Address offset: 0x00 */
- __IO uint16_t RESERVED0; /*!< Reserved */
- __IO uint16_t EP1R; /*!< USB Endpoint 1 register, Address offset: 0x04 */
- __IO uint16_t RESERVED1; /*!< Reserved */
- __IO uint16_t EP2R; /*!< USB Endpoint 2 register, Address offset: 0x08 */
- __IO uint16_t RESERVED2; /*!< Reserved */
- __IO uint16_t EP3R; /*!< USB Endpoint 3 register, Address offset: 0x0C */
- __IO uint16_t RESERVED3; /*!< Reserved */
- __IO uint16_t EP4R; /*!< USB Endpoint 4 register, Address offset: 0x10 */
- __IO uint16_t RESERVED4; /*!< Reserved */
- __IO uint16_t EP5R; /*!< USB Endpoint 5 register, Address offset: 0x14 */
- __IO uint16_t RESERVED5; /*!< Reserved */
- __IO uint16_t EP6R; /*!< USB Endpoint 6 register, Address offset: 0x18 */
- __IO uint16_t RESERVED6; /*!< Reserved */
- __IO uint16_t EP7R; /*!< USB Endpoint 7 register, Address offset: 0x1C */
- __IO uint16_t RESERVED7[17]; /*!< Reserved */
- __IO uint16_t CNTR; /*!< Control register, Address offset: 0x40 */
- __IO uint16_t RESERVED8; /*!< Reserved */
- __IO uint16_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */
- __IO uint16_t RESERVED9; /*!< Reserved */
- __IO uint16_t FNR; /*!< Frame number register, Address offset: 0x48 */
- __IO uint16_t RESERVEDA; /*!< Reserved */
- __IO uint16_t DADDR; /*!< Device address register, Address offset: 0x4C */
- __IO uint16_t RESERVEDB; /*!< Reserved */
- __IO uint16_t BTABLE; /*!< Buffer Table address register, Address offset: 0x50 */
- __IO uint16_t RESERVEDC; /*!< Reserved */
-} USB_TypeDef;
-
-
-/**
- * @brief Window WATCHDOG
- */
-
-typedef struct
-{
- __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
- __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
- __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
-} WWDG_TypeDef;
-
-/**
- * @}
- */
-
-/** @addtogroup Peripheral_memory_map
- * @{
- */
-
-
-#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */
-#define FLASH_BANK1_END ((uint32_t)0x08007FFF) /*!< FLASH END address of bank1 */
-#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */
-#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
-
-#define SRAM_BB_BASE ((uint32_t)0x22000000) /*!< SRAM base address in the bit-band region */
-#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */
-
-
-/*!< Peripheral memory map */
-#define APB1PERIPH_BASE PERIPH_BASE
-#define APB2PERIPH_BASE (PERIPH_BASE + 0x10000)
-#define AHBPERIPH_BASE (PERIPH_BASE + 0x20000)
-
-#define TIM2_BASE (APB1PERIPH_BASE + 0x0000)
-#define TIM3_BASE (APB1PERIPH_BASE + 0x0400)
-#define RTC_BASE (APB1PERIPH_BASE + 0x2800)
-#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00)
-#define IWDG_BASE (APB1PERIPH_BASE + 0x3000)
-#define USART2_BASE (APB1PERIPH_BASE + 0x4400)
-#define I2C1_BASE (APB1PERIPH_BASE + 0x5400)
-#define CAN1_BASE (APB1PERIPH_BASE + 0x6400)
-#define BKP_BASE (APB1PERIPH_BASE + 0x6C00)
-#define PWR_BASE (APB1PERIPH_BASE + 0x7000)
-#define AFIO_BASE (APB2PERIPH_BASE + 0x0000)
-#define EXTI_BASE (APB2PERIPH_BASE + 0x0400)
-#define GPIOA_BASE (APB2PERIPH_BASE + 0x0800)
-#define GPIOB_BASE (APB2PERIPH_BASE + 0x0C00)
-#define GPIOC_BASE (APB2PERIPH_BASE + 0x1000)
-#define GPIOD_BASE (APB2PERIPH_BASE + 0x1400)
-#define ADC1_BASE (APB2PERIPH_BASE + 0x2400)
-#define ADC2_BASE (APB2PERIPH_BASE + 0x2800)
-#define TIM1_BASE (APB2PERIPH_BASE + 0x2C00)
-#define SPI1_BASE (APB2PERIPH_BASE + 0x3000)
-#define USART1_BASE (APB2PERIPH_BASE + 0x3800)
-
-#define SDIO_BASE (PERIPH_BASE + 0x18000)
-
-#define DMA1_BASE (AHBPERIPH_BASE + 0x0000)
-#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x0008)
-#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x001C)
-#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x0030)
-#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x0044)
-#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x0058)
-#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x006C)
-#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x0080)
-#define RCC_BASE (AHBPERIPH_BASE + 0x1000)
-#define CRC_BASE (AHBPERIPH_BASE + 0x3000)
-
-#define FLASH_R_BASE (AHBPERIPH_BASE + 0x2000) /*!< Flash registers base address */
-#define FLASHSIZE_BASE ((uint32_t)0x1FFFF7E0) /*!< FLASH Size register base address */
-#define UID_BASE ((uint32_t)0x1FFFF7E8) /*!< Unique device ID register base address */
-#define OB_BASE ((uint32_t)0x1FFFF800) /*!< Flash Option Bytes base address */
-
-
-
-#define DBGMCU_BASE ((uint32_t)0xE0042000) /*!< Debug MCU registers base address */
-
-/* USB device FS */
-#define USB_BASE (APB1PERIPH_BASE + 0x00005C00) /*!< USB_IP Peripheral Registers base address */
-#define USB_PMAADDR (APB1PERIPH_BASE + 0x00006000) /*!< USB_IP Packet Memory Area base address */
-
-
-/**
- * @}
- */
-
-/** @addtogroup Peripheral_declaration
- * @{
- */
-
-#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
-#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
-#define RTC ((RTC_TypeDef *) RTC_BASE)
-#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
-#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
-#define USART2 ((USART_TypeDef *) USART2_BASE)
-#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
-#define USB ((USB_TypeDef *) USB_BASE)
-#define CAN1 ((CAN_TypeDef *) CAN1_BASE)
-#define BKP ((BKP_TypeDef *) BKP_BASE)
-#define PWR ((PWR_TypeDef *) PWR_BASE)
-#define AFIO ((AFIO_TypeDef *) AFIO_BASE)
-#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
-#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
-#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
-#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
-#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
-#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
-#define ADC2 ((ADC_TypeDef *) ADC2_BASE)
-#define ADC12_COMMON ((ADC_Common_TypeDef *) ADC1_BASE)
-#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
-#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
-#define USART1 ((USART_TypeDef *) USART1_BASE)
-#define SDIO ((SDIO_TypeDef *) SDIO_BASE)
-#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
-#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
-#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
-#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
-#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
-#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
-#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE)
-#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE)
-#define RCC ((RCC_TypeDef *) RCC_BASE)
-#define CRC ((CRC_TypeDef *) CRC_BASE)
-#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
-#define OB ((OB_TypeDef *) OB_BASE)
-#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
-
-
-/**
- * @}
- */
-
-/** @addtogroup Exported_constants
- * @{
- */
-
- /** @addtogroup Peripheral_Registers_Bits_Definition
- * @{
- */
-
-/******************************************************************************/
-/* Peripheral Registers_Bits_Definition */
-/******************************************************************************/
-
-/******************************************************************************/
-/* */
-/* CRC calculation unit (CRC) */
-/* */
-/******************************************************************************/
-
-/******************* Bit definition for CRC_DR register *********************/
-#define CRC_DR_DR_Pos (0U)
-#define CRC_DR_DR_Msk (0xFFFFFFFFU << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */
-#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */
-
-/******************* Bit definition for CRC_IDR register ********************/
-#define CRC_IDR_IDR_Pos (0U)
-#define CRC_IDR_IDR_Msk (0xFFU << CRC_IDR_IDR_Pos) /*!< 0x000000FF */
-#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 8-bit data register bits */
-
-/******************** Bit definition for CRC_CR register ********************/
-#define CRC_CR_RESET_Pos (0U)
-#define CRC_CR_RESET_Msk (0x1U << CRC_CR_RESET_Pos) /*!< 0x00000001 */
-#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET bit */
-
-/******************************************************************************/
-/* */
-/* Power Control */
-/* */
-/******************************************************************************/
-
-/******************** Bit definition for PWR_CR register ********************/
-#define PWR_CR_LPDS_Pos (0U)
-#define PWR_CR_LPDS_Msk (0x1U << PWR_CR_LPDS_Pos) /*!< 0x00000001 */
-#define PWR_CR_LPDS PWR_CR_LPDS_Msk /*!< Low-Power Deepsleep */
-#define PWR_CR_PDDS_Pos (1U)
-#define PWR_CR_PDDS_Msk (0x1U << PWR_CR_PDDS_Pos) /*!< 0x00000002 */
-#define PWR_CR_PDDS PWR_CR_PDDS_Msk /*!< Power Down Deepsleep */
-#define PWR_CR_CWUF_Pos (2U)
-#define PWR_CR_CWUF_Msk (0x1U << PWR_CR_CWUF_Pos) /*!< 0x00000004 */
-#define PWR_CR_CWUF PWR_CR_CWUF_Msk /*!< Clear Wakeup Flag */
-#define PWR_CR_CSBF_Pos (3U)
-#define PWR_CR_CSBF_Msk (0x1U << PWR_CR_CSBF_Pos) /*!< 0x00000008 */
-#define PWR_CR_CSBF PWR_CR_CSBF_Msk /*!< Clear Standby Flag */
-#define PWR_CR_PVDE_Pos (4U)
-#define PWR_CR_PVDE_Msk (0x1U << PWR_CR_PVDE_Pos) /*!< 0x00000010 */
-#define PWR_CR_PVDE PWR_CR_PVDE_Msk /*!< Power Voltage Detector Enable */
-
-#define PWR_CR_PLS_Pos (5U)
-#define PWR_CR_PLS_Msk (0x7U << PWR_CR_PLS_Pos) /*!< 0x000000E0 */
-#define PWR_CR_PLS PWR_CR_PLS_Msk /*!< PLS[2:0] bits (PVD Level Selection) */
-#define PWR_CR_PLS_0 (0x1U << PWR_CR_PLS_Pos) /*!< 0x00000020 */
-#define PWR_CR_PLS_1 (0x2U << PWR_CR_PLS_Pos) /*!< 0x00000040 */
-#define PWR_CR_PLS_2 (0x4U << PWR_CR_PLS_Pos) /*!< 0x00000080 */
-
-/*!< PVD level configuration */
-#define PWR_CR_PLS_2V2 ((uint32_t)0x00000000) /*!< PVD level 2.2V */
-#define PWR_CR_PLS_2V3 ((uint32_t)0x00000020) /*!< PVD level 2.3V */
-#define PWR_CR_PLS_2V4 ((uint32_t)0x00000040) /*!< PVD level 2.4V */
-#define PWR_CR_PLS_2V5 ((uint32_t)0x00000060) /*!< PVD level 2.5V */
-#define PWR_CR_PLS_2V6 ((uint32_t)0x00000080) /*!< PVD level 2.6V */
-#define PWR_CR_PLS_2V7 ((uint32_t)0x000000A0) /*!< PVD level 2.7V */
-#define PWR_CR_PLS_2V8 ((uint32_t)0x000000C0) /*!< PVD level 2.8V */
-#define PWR_CR_PLS_2V9 ((uint32_t)0x000000E0) /*!< PVD level 2.9V */
-
-#define PWR_CR_DBP_Pos (8U)
-#define PWR_CR_DBP_Msk (0x1U << PWR_CR_DBP_Pos) /*!< 0x00000100 */
-#define PWR_CR_DBP PWR_CR_DBP_Msk /*!< Disable Backup Domain write protection */
-
-
-/******************* Bit definition for PWR_CSR register ********************/
-#define PWR_CSR_WUF_Pos (0U)
-#define PWR_CSR_WUF_Msk (0x1U << PWR_CSR_WUF_Pos) /*!< 0x00000001 */
-#define PWR_CSR_WUF PWR_CSR_WUF_Msk /*!< Wakeup Flag */
-#define PWR_CSR_SBF_Pos (1U)
-#define PWR_CSR_SBF_Msk (0x1U << PWR_CSR_SBF_Pos) /*!< 0x00000002 */
-#define PWR_CSR_SBF PWR_CSR_SBF_Msk /*!< Standby Flag */
-#define PWR_CSR_PVDO_Pos (2U)
-#define PWR_CSR_PVDO_Msk (0x1U << PWR_CSR_PVDO_Pos) /*!< 0x00000004 */
-#define PWR_CSR_PVDO PWR_CSR_PVDO_Msk /*!< PVD Output */
-#define PWR_CSR_EWUP_Pos (8U)
-#define PWR_CSR_EWUP_Msk (0x1U << PWR_CSR_EWUP_Pos) /*!< 0x00000100 */
-#define PWR_CSR_EWUP PWR_CSR_EWUP_Msk /*!< Enable WKUP pin */
-
-/******************************************************************************/
-/* */
-/* Backup registers */
-/* */
-/******************************************************************************/
-
-/******************* Bit definition for BKP_DR1 register ********************/
-#define BKP_DR1_D_Pos (0U)
-#define BKP_DR1_D_Msk (0xFFFFU << BKP_DR1_D_Pos) /*!< 0x0000FFFF */
-#define BKP_DR1_D BKP_DR1_D_Msk /*!< Backup data */
-
-/******************* Bit definition for BKP_DR2 register ********************/
-#define BKP_DR2_D_Pos (0U)
-#define BKP_DR2_D_Msk (0xFFFFU << BKP_DR2_D_Pos) /*!< 0x0000FFFF */
-#define BKP_DR2_D BKP_DR2_D_Msk /*!< Backup data */
-
-/******************* Bit definition for BKP_DR3 register ********************/
-#define BKP_DR3_D_Pos (0U)
-#define BKP_DR3_D_Msk (0xFFFFU << BKP_DR3_D_Pos) /*!< 0x0000FFFF */
-#define BKP_DR3_D BKP_DR3_D_Msk /*!< Backup data */
-
-/******************* Bit definition for BKP_DR4 register ********************/
-#define BKP_DR4_D_Pos (0U)
-#define BKP_DR4_D_Msk (0xFFFFU << BKP_DR4_D_Pos) /*!< 0x0000FFFF */
-#define BKP_DR4_D BKP_DR4_D_Msk /*!< Backup data */
-
-/******************* Bit definition for BKP_DR5 register ********************/
-#define BKP_DR5_D_Pos (0U)
-#define BKP_DR5_D_Msk (0xFFFFU << BKP_DR5_D_Pos) /*!< 0x0000FFFF */
-#define BKP_DR5_D BKP_DR5_D_Msk /*!< Backup data */
-
-/******************* Bit definition for BKP_DR6 register ********************/
-#define BKP_DR6_D_Pos (0U)
-#define BKP_DR6_D_Msk (0xFFFFU << BKP_DR6_D_Pos) /*!< 0x0000FFFF */
-#define BKP_DR6_D BKP_DR6_D_Msk /*!< Backup data */
-
-/******************* Bit definition for BKP_DR7 register ********************/
-#define BKP_DR7_D_Pos (0U)
-#define BKP_DR7_D_Msk (0xFFFFU << BKP_DR7_D_Pos) /*!< 0x0000FFFF */
-#define BKP_DR7_D BKP_DR7_D_Msk /*!< Backup data */
-
-/******************* Bit definition for BKP_DR8 register ********************/
-#define BKP_DR8_D_Pos (0U)
-#define BKP_DR8_D_Msk (0xFFFFU << BKP_DR8_D_Pos) /*!< 0x0000FFFF */
-#define BKP_DR8_D BKP_DR8_D_Msk /*!< Backup data */
-
-/******************* Bit definition for BKP_DR9 register ********************/
-#define BKP_DR9_D_Pos (0U)
-#define BKP_DR9_D_Msk (0xFFFFU << BKP_DR9_D_Pos) /*!< 0x0000FFFF */
-#define BKP_DR9_D BKP_DR9_D_Msk /*!< Backup data */
-
-/******************* Bit definition for BKP_DR10 register *******************/
-#define BKP_DR10_D_Pos (0U)
-#define BKP_DR10_D_Msk (0xFFFFU << BKP_DR10_D_Pos) /*!< 0x0000FFFF */
-#define BKP_DR10_D BKP_DR10_D_Msk /*!< Backup data */
-
-#define RTC_BKP_NUMBER 10
-
-/****************** Bit definition for BKP_RTCCR register *******************/
-#define BKP_RTCCR_CAL_Pos (0U)
-#define BKP_RTCCR_CAL_Msk (0x7FU << BKP_RTCCR_CAL_Pos) /*!< 0x0000007F */
-#define BKP_RTCCR_CAL BKP_RTCCR_CAL_Msk /*!< Calibration value */
-#define BKP_RTCCR_CCO_Pos (7U)
-#define BKP_RTCCR_CCO_Msk (0x1U << BKP_RTCCR_CCO_Pos) /*!< 0x00000080 */
-#define BKP_RTCCR_CCO BKP_RTCCR_CCO_Msk /*!< Calibration Clock Output */
-#define BKP_RTCCR_ASOE_Pos (8U)
-#define BKP_RTCCR_ASOE_Msk (0x1U << BKP_RTCCR_ASOE_Pos) /*!< 0x00000100 */
-#define BKP_RTCCR_ASOE BKP_RTCCR_ASOE_Msk /*!< Alarm or Second Output Enable */
-#define BKP_RTCCR_ASOS_Pos (9U)
-#define BKP_RTCCR_ASOS_Msk (0x1U << BKP_RTCCR_ASOS_Pos) /*!< 0x00000200 */
-#define BKP_RTCCR_ASOS BKP_RTCCR_ASOS_Msk /*!< Alarm or Second Output Selection */
-
-/******************** Bit definition for BKP_CR register ********************/
-#define BKP_CR_TPE_Pos (0U)
-#define BKP_CR_TPE_Msk (0x1U << BKP_CR_TPE_Pos) /*!< 0x00000001 */
-#define BKP_CR_TPE BKP_CR_TPE_Msk /*!< TAMPER pin enable */
-#define BKP_CR_TPAL_Pos (1U)
-#define BKP_CR_TPAL_Msk (0x1U << BKP_CR_TPAL_Pos) /*!< 0x00000002 */
-#define BKP_CR_TPAL BKP_CR_TPAL_Msk /*!< TAMPER pin active level */
-
-/******************* Bit definition for BKP_CSR register ********************/
-#define BKP_CSR_CTE_Pos (0U)
-#define BKP_CSR_CTE_Msk (0x1U << BKP_CSR_CTE_Pos) /*!< 0x00000001 */
-#define BKP_CSR_CTE BKP_CSR_CTE_Msk /*!< Clear Tamper event */
-#define BKP_CSR_CTI_Pos (1U)
-#define BKP_CSR_CTI_Msk (0x1U << BKP_CSR_CTI_Pos) /*!< 0x00000002 */
-#define BKP_CSR_CTI BKP_CSR_CTI_Msk /*!< Clear Tamper Interrupt */
-#define BKP_CSR_TPIE_Pos (2U)
-#define BKP_CSR_TPIE_Msk (0x1U << BKP_CSR_TPIE_Pos) /*!< 0x00000004 */
-#define BKP_CSR_TPIE BKP_CSR_TPIE_Msk /*!< TAMPER Pin interrupt enable */
-#define BKP_CSR_TEF_Pos (8U)
-#define BKP_CSR_TEF_Msk (0x1U << BKP_CSR_TEF_Pos) /*!< 0x00000100 */
-#define BKP_CSR_TEF BKP_CSR_TEF_Msk /*!< Tamper Event Flag */
-#define BKP_CSR_TIF_Pos (9U)
-#define BKP_CSR_TIF_Msk (0x1U << BKP_CSR_TIF_Pos) /*!< 0x00000200 */
-#define BKP_CSR_TIF BKP_CSR_TIF_Msk /*!< Tamper Interrupt Flag */
-
-/******************************************************************************/
-/* */
-/* Reset and Clock Control */
-/* */
-/******************************************************************************/
-
-/******************** Bit definition for RCC_CR register ********************/
-#define RCC_CR_HSION_Pos (0U)
-#define RCC_CR_HSION_Msk (0x1U << RCC_CR_HSION_Pos) /*!< 0x00000001 */
-#define RCC_CR_HSION RCC_CR_HSION_Msk /*!< Internal High Speed clock enable */
-#define RCC_CR_HSIRDY_Pos (1U)
-#define RCC_CR_HSIRDY_Msk (0x1U << RCC_CR_HSIRDY_Pos) /*!< 0x00000002 */
-#define RCC_CR_HSIRDY RCC_CR_HSIRDY_Msk /*!< Internal High Speed clock ready flag */
-#define RCC_CR_HSITRIM_Pos (3U)
-#define RCC_CR_HSITRIM_Msk (0x1FU << RCC_CR_HSITRIM_Pos) /*!< 0x000000F8 */
-#define RCC_CR_HSITRIM RCC_CR_HSITRIM_Msk /*!< Internal High Speed clock trimming */
-#define RCC_CR_HSICAL_Pos (8U)
-#define RCC_CR_HSICAL_Msk (0xFFU << RCC_CR_HSICAL_Pos) /*!< 0x0000FF00 */
-#define RCC_CR_HSICAL RCC_CR_HSICAL_Msk /*!< Internal High Speed clock Calibration */
-#define RCC_CR_HSEON_Pos (16U)
-#define RCC_CR_HSEON_Msk (0x1U << RCC_CR_HSEON_Pos) /*!< 0x00010000 */
-#define RCC_CR_HSEON RCC_CR_HSEON_Msk /*!< External High Speed clock enable */
-#define RCC_CR_HSERDY_Pos (17U)
-#define RCC_CR_HSERDY_Msk (0x1U << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */
-#define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed clock ready flag */
-#define RCC_CR_HSEBYP_Pos (18U)
-#define RCC_CR_HSEBYP_Msk (0x1U << RCC_CR_HSEBYP_Pos) /*!< 0x00040000 */
-#define RCC_CR_HSEBYP RCC_CR_HSEBYP_Msk /*!< External High Speed clock Bypass */
-#define RCC_CR_CSSON_Pos (19U)
-#define RCC_CR_CSSON_Msk (0x1U << RCC_CR_CSSON_Pos) /*!< 0x00080000 */
-#define RCC_CR_CSSON RCC_CR_CSSON_Msk /*!< Clock Security System enable */
-#define RCC_CR_PLLON_Pos (24U)
-#define RCC_CR_PLLON_Msk (0x1U << RCC_CR_PLLON_Pos) /*!< 0x01000000 */
-#define RCC_CR_PLLON RCC_CR_PLLON_Msk /*!< PLL enable */
-#define RCC_CR_PLLRDY_Pos (25U)
-#define RCC_CR_PLLRDY_Msk (0x1U << RCC_CR_PLLRDY_Pos) /*!< 0x02000000 */
-#define RCC_CR_PLLRDY RCC_CR_PLLRDY_Msk /*!< PLL clock ready flag */
-
-
-/******************* Bit definition for RCC_CFGR register *******************/
-/*!< SW configuration */
-#define RCC_CFGR_SW_Pos (0U)
-#define RCC_CFGR_SW_Msk (0x3U << RCC_CFGR_SW_Pos) /*!< 0x00000003 */
-#define RCC_CFGR_SW RCC_CFGR_SW_Msk /*!< SW[1:0] bits (System clock Switch) */
-#define RCC_CFGR_SW_0 (0x1U << RCC_CFGR_SW_Pos) /*!< 0x00000001 */
-#define RCC_CFGR_SW_1 (0x2U << RCC_CFGR_SW_Pos) /*!< 0x00000002 */
-
-#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
-#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
-#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
-
-/*!< SWS configuration */
-#define RCC_CFGR_SWS_Pos (2U)
-#define RCC_CFGR_SWS_Msk (0x3U << RCC_CFGR_SWS_Pos) /*!< 0x0000000C */
-#define RCC_CFGR_SWS RCC_CFGR_SWS_Msk /*!< SWS[1:0] bits (System Clock Switch Status) */
-#define RCC_CFGR_SWS_0 (0x1U << RCC_CFGR_SWS_Pos) /*!< 0x00000004 */
-#define RCC_CFGR_SWS_1 (0x2U << RCC_CFGR_SWS_Pos) /*!< 0x00000008 */
-
-#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
-#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
-#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
-
-/*!< HPRE configuration */
-#define RCC_CFGR_HPRE_Pos (4U)
-#define RCC_CFGR_HPRE_Msk (0xFU << RCC_CFGR_HPRE_Pos) /*!< 0x000000F0 */
-#define RCC_CFGR_HPRE RCC_CFGR_HPRE_Msk /*!< HPRE[3:0] bits (AHB prescaler) */
-#define RCC_CFGR_HPRE_0 (0x1U << RCC_CFGR_HPRE_Pos) /*!< 0x00000010 */
-#define RCC_CFGR_HPRE_1 (0x2U << RCC_CFGR_HPRE_Pos) /*!< 0x00000020 */
-#define RCC_CFGR_HPRE_2 (0x4U << RCC_CFGR_HPRE_Pos) /*!< 0x00000040 */
-#define RCC_CFGR_HPRE_3 (0x8U << RCC_CFGR_HPRE_Pos) /*!< 0x00000080 */
-
-#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
-#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
-#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
-#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
-#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
-#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
-#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
-#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
-#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
-
-/*!< PPRE1 configuration */
-#define RCC_CFGR_PPRE1_Pos (8U)
-#define RCC_CFGR_PPRE1_Msk (0x7U << RCC_CFGR_PPRE1_Pos) /*!< 0x00000700 */
-#define RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_Msk /*!< PRE1[2:0] bits (APB1 prescaler) */
-#define RCC_CFGR_PPRE1_0 (0x1U << RCC_CFGR_PPRE1_Pos) /*!< 0x00000100 */
-#define RCC_CFGR_PPRE1_1 (0x2U << RCC_CFGR_PPRE1_Pos) /*!< 0x00000200 */
-#define RCC_CFGR_PPRE1_2 (0x4U << RCC_CFGR_PPRE1_Pos) /*!< 0x00000400 */
-
-#define RCC_CFGR_PPRE1_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
-#define RCC_CFGR_PPRE1_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */
-#define RCC_CFGR_PPRE1_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */
-#define RCC_CFGR_PPRE1_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */
-#define RCC_CFGR_PPRE1_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */
-
-/*!< PPRE2 configuration */
-#define RCC_CFGR_PPRE2_Pos (11U)
-#define RCC_CFGR_PPRE2_Msk (0x7U << RCC_CFGR_PPRE2_Pos) /*!< 0x00003800 */
-#define RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_Msk /*!< PRE2[2:0] bits (APB2 prescaler) */
-#define RCC_CFGR_PPRE2_0 (0x1U << RCC_CFGR_PPRE2_Pos) /*!< 0x00000800 */
-#define RCC_CFGR_PPRE2_1 (0x2U << RCC_CFGR_PPRE2_Pos) /*!< 0x00001000 */
-#define RCC_CFGR_PPRE2_2 (0x4U << RCC_CFGR_PPRE2_Pos) /*!< 0x00002000 */
-
-#define RCC_CFGR_PPRE2_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
-#define RCC_CFGR_PPRE2_DIV2 ((uint32_t)0x00002000) /*!< HCLK divided by 2 */
-#define RCC_CFGR_PPRE2_DIV4 ((uint32_t)0x00002800) /*!< HCLK divided by 4 */
-#define RCC_CFGR_PPRE2_DIV8 ((uint32_t)0x00003000) /*!< HCLK divided by 8 */
-#define RCC_CFGR_PPRE2_DIV16 ((uint32_t)0x00003800) /*!< HCLK divided by 16 */
-
-/*!< ADCPPRE configuration */
-#define RCC_CFGR_ADCPRE_Pos (14U)
-#define RCC_CFGR_ADCPRE_Msk (0x3U << RCC_CFGR_ADCPRE_Pos) /*!< 0x0000C000 */
-#define RCC_CFGR_ADCPRE RCC_CFGR_ADCPRE_Msk /*!< ADCPRE[1:0] bits (ADC prescaler) */
-#define RCC_CFGR_ADCPRE_0 (0x1U << RCC_CFGR_ADCPRE_Pos) /*!< 0x00004000 */
-#define RCC_CFGR_ADCPRE_1 (0x2U << RCC_CFGR_ADCPRE_Pos) /*!< 0x00008000 */
-
-#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000) /*!< PCLK2 divided by 2 */
-#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000) /*!< PCLK2 divided by 4 */
-#define RCC_CFGR_ADCPRE_DIV6 ((uint32_t)0x00008000) /*!< PCLK2 divided by 6 */
-#define RCC_CFGR_ADCPRE_DIV8 ((uint32_t)0x0000C000) /*!< PCLK2 divided by 8 */
-
-#define RCC_CFGR_PLLSRC_Pos (16U)
-#define RCC_CFGR_PLLSRC_Msk (0x1U << RCC_CFGR_PLLSRC_Pos) /*!< 0x00010000 */
-#define RCC_CFGR_PLLSRC RCC_CFGR_PLLSRC_Msk /*!< PLL entry clock source */
-
-#define RCC_CFGR_PLLXTPRE_Pos (17U)
-#define RCC_CFGR_PLLXTPRE_Msk (0x1U << RCC_CFGR_PLLXTPRE_Pos) /*!< 0x00020000 */
-#define RCC_CFGR_PLLXTPRE RCC_CFGR_PLLXTPRE_Msk /*!< HSE divider for PLL entry */
-
-/*!< PLLMUL configuration */
-#define RCC_CFGR_PLLMULL_Pos (18U)
-#define RCC_CFGR_PLLMULL_Msk (0xFU << RCC_CFGR_PLLMULL_Pos) /*!< 0x003C0000 */
-#define RCC_CFGR_PLLMULL RCC_CFGR_PLLMULL_Msk /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
-#define RCC_CFGR_PLLMULL_0 (0x1U << RCC_CFGR_PLLMULL_Pos) /*!< 0x00040000 */
-#define RCC_CFGR_PLLMULL_1 (0x2U << RCC_CFGR_PLLMULL_Pos) /*!< 0x00080000 */
-#define RCC_CFGR_PLLMULL_2 (0x4U << RCC_CFGR_PLLMULL_Pos) /*!< 0x00100000 */
-#define RCC_CFGR_PLLMULL_3 (0x8U << RCC_CFGR_PLLMULL_Pos) /*!< 0x00200000 */
-
-#define RCC_CFGR_PLLXTPRE_HSE ((uint32_t)0x00000000) /*!< HSE clock not divided for PLL entry */
-#define RCC_CFGR_PLLXTPRE_HSE_DIV2 ((uint32_t)0x00020000) /*!< HSE clock divided by 2 for PLL entry */
-
-#define RCC_CFGR_PLLMULL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */
-#define RCC_CFGR_PLLMULL3_Pos (18U)
-#define RCC_CFGR_PLLMULL3_Msk (0x1U << RCC_CFGR_PLLMULL3_Pos) /*!< 0x00040000 */
-#define RCC_CFGR_PLLMULL3 RCC_CFGR_PLLMULL3_Msk /*!< PLL input clock*3 */
-#define RCC_CFGR_PLLMULL4_Pos (19U)
-#define RCC_CFGR_PLLMULL4_Msk (0x1U << RCC_CFGR_PLLMULL4_Pos) /*!< 0x00080000 */
-#define RCC_CFGR_PLLMULL4 RCC_CFGR_PLLMULL4_Msk /*!< PLL input clock*4 */
-#define RCC_CFGR_PLLMULL5_Pos (18U)
-#define RCC_CFGR_PLLMULL5_Msk (0x3U << RCC_CFGR_PLLMULL5_Pos) /*!< 0x000C0000 */
-#define RCC_CFGR_PLLMULL5 RCC_CFGR_PLLMULL5_Msk /*!< PLL input clock*5 */
-#define RCC_CFGR_PLLMULL6_Pos (20U)
-#define RCC_CFGR_PLLMULL6_Msk (0x1U << RCC_CFGR_PLLMULL6_Pos) /*!< 0x00100000 */
-#define RCC_CFGR_PLLMULL6 RCC_CFGR_PLLMULL6_Msk /*!< PLL input clock*6 */
-#define RCC_CFGR_PLLMULL7_Pos (18U)
-#define RCC_CFGR_PLLMULL7_Msk (0x5U << RCC_CFGR_PLLMULL7_Pos) /*!< 0x00140000 */
-#define RCC_CFGR_PLLMULL7 RCC_CFGR_PLLMULL7_Msk /*!< PLL input clock*7 */
-#define RCC_CFGR_PLLMULL8_Pos (19U)
-#define RCC_CFGR_PLLMULL8_Msk (0x3U << RCC_CFGR_PLLMULL8_Pos) /*!< 0x00180000 */
-#define RCC_CFGR_PLLMULL8 RCC_CFGR_PLLMULL8_Msk /*!< PLL input clock*8 */
-#define RCC_CFGR_PLLMULL9_Pos (18U)
-#define RCC_CFGR_PLLMULL9_Msk (0x7U << RCC_CFGR_PLLMULL9_Pos) /*!< 0x001C0000 */
-#define RCC_CFGR_PLLMULL9 RCC_CFGR_PLLMULL9_Msk /*!< PLL input clock*9 */
-#define RCC_CFGR_PLLMULL10_Pos (21U)
-#define RCC_CFGR_PLLMULL10_Msk (0x1U << RCC_CFGR_PLLMULL10_Pos) /*!< 0x00200000 */
-#define RCC_CFGR_PLLMULL10 RCC_CFGR_PLLMULL10_Msk /*!< PLL input clock10 */
-#define RCC_CFGR_PLLMULL11_Pos (18U)
-#define RCC_CFGR_PLLMULL11_Msk (0x9U << RCC_CFGR_PLLMULL11_Pos) /*!< 0x00240000 */
-#define RCC_CFGR_PLLMULL11 RCC_CFGR_PLLMULL11_Msk /*!< PLL input clock*11 */
-#define RCC_CFGR_PLLMULL12_Pos (19U)
-#define RCC_CFGR_PLLMULL12_Msk (0x5U << RCC_CFGR_PLLMULL12_Pos) /*!< 0x00280000 */
-#define RCC_CFGR_PLLMULL12 RCC_CFGR_PLLMULL12_Msk /*!< PLL input clock*12 */
-#define RCC_CFGR_PLLMULL13_Pos (18U)
-#define RCC_CFGR_PLLMULL13_Msk (0xBU << RCC_CFGR_PLLMULL13_Pos) /*!< 0x002C0000 */
-#define RCC_CFGR_PLLMULL13 RCC_CFGR_PLLMULL13_Msk /*!< PLL input clock*13 */
-#define RCC_CFGR_PLLMULL14_Pos (20U)
-#define RCC_CFGR_PLLMULL14_Msk (0x3U << RCC_CFGR_PLLMULL14_Pos) /*!< 0x00300000 */
-#define RCC_CFGR_PLLMULL14 RCC_CFGR_PLLMULL14_Msk /*!< PLL input clock*14 */
-#define RCC_CFGR_PLLMULL15_Pos (18U)
-#define RCC_CFGR_PLLMULL15_Msk (0xDU << RCC_CFGR_PLLMULL15_Pos) /*!< 0x00340000 */
-#define RCC_CFGR_PLLMULL15 RCC_CFGR_PLLMULL15_Msk /*!< PLL input clock*15 */
-#define RCC_CFGR_PLLMULL16_Pos (19U)
-#define RCC_CFGR_PLLMULL16_Msk (0x7U << RCC_CFGR_PLLMULL16_Pos) /*!< 0x00380000 */
-#define RCC_CFGR_PLLMULL16 RCC_CFGR_PLLMULL16_Msk /*!< PLL input clock*16 */
-#define RCC_CFGR_USBPRE_Pos (22U)
-#define RCC_CFGR_USBPRE_Msk (0x1U << RCC_CFGR_USBPRE_Pos) /*!< 0x00400000 */
-#define RCC_CFGR_USBPRE RCC_CFGR_USBPRE_Msk /*!< USB Device prescaler */
-
-/*!< MCO configuration */
-#define RCC_CFGR_MCO_Pos (24U)
-#define RCC_CFGR_MCO_Msk (0x7U << RCC_CFGR_MCO_Pos) /*!< 0x07000000 */
-#define RCC_CFGR_MCO RCC_CFGR_MCO_Msk /*!< MCO[2:0] bits (Microcontroller Clock Output) */
-#define RCC_CFGR_MCO_0 (0x1U << RCC_CFGR_MCO_Pos) /*!< 0x01000000 */
-#define RCC_CFGR_MCO_1 (0x2U << RCC_CFGR_MCO_Pos) /*!< 0x02000000 */
-#define RCC_CFGR_MCO_2 (0x4U << RCC_CFGR_MCO_Pos) /*!< 0x04000000 */
-
-#define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
-#define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */
-#define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */
-#define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */
-#define RCC_CFGR_MCO_PLLCLK_DIV2 ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */
-
- /* Reference defines */
- #define RCC_CFGR_MCOSEL RCC_CFGR_MCO
- #define RCC_CFGR_MCOSEL_0 RCC_CFGR_MCO_0
- #define RCC_CFGR_MCOSEL_1 RCC_CFGR_MCO_1
- #define RCC_CFGR_MCOSEL_2 RCC_CFGR_MCO_2
- #define RCC_CFGR_MCOSEL_NOCLOCK RCC_CFGR_MCO_NOCLOCK
- #define RCC_CFGR_MCOSEL_SYSCLK RCC_CFGR_MCO_SYSCLK
- #define RCC_CFGR_MCOSEL_HSI RCC_CFGR_MCO_HSI
- #define RCC_CFGR_MCOSEL_HSE RCC_CFGR_MCO_HSE
- #define RCC_CFGR_MCOSEL_PLL_DIV2 RCC_CFGR_MCO_PLLCLK_DIV2
-
-/*!<****************** Bit definition for RCC_CIR register ********************/
-#define RCC_CIR_LSIRDYF_Pos (0U)
-#define RCC_CIR_LSIRDYF_Msk (0x1U << RCC_CIR_LSIRDYF_Pos) /*!< 0x00000001 */
-#define RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF_Msk /*!< LSI Ready Interrupt flag */
-#define RCC_CIR_LSERDYF_Pos (1U)
-#define RCC_CIR_LSERDYF_Msk (0x1U << RCC_CIR_LSERDYF_Pos) /*!< 0x00000002 */
-#define RCC_CIR_LSERDYF RCC_CIR_LSERDYF_Msk /*!< LSE Ready Interrupt flag */
-#define RCC_CIR_HSIRDYF_Pos (2U)
-#define RCC_CIR_HSIRDYF_Msk (0x1U << RCC_CIR_HSIRDYF_Pos) /*!< 0x00000004 */
-#define RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF_Msk /*!< HSI Ready Interrupt flag */
-#define RCC_CIR_HSERDYF_Pos (3U)
-#define RCC_CIR_HSERDYF_Msk (0x1U << RCC_CIR_HSERDYF_Pos) /*!< 0x00000008 */
-#define RCC_CIR_HSERDYF RCC_CIR_HSERDYF_Msk /*!< HSE Ready Interrupt flag */
-#define RCC_CIR_PLLRDYF_Pos (4U)
-#define RCC_CIR_PLLRDYF_Msk (0x1U << RCC_CIR_PLLRDYF_Pos) /*!< 0x00000010 */
-#define RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF_Msk /*!< PLL Ready Interrupt flag */
-#define RCC_CIR_CSSF_Pos (7U)
-#define RCC_CIR_CSSF_Msk (0x1U << RCC_CIR_CSSF_Pos) /*!< 0x00000080 */
-#define RCC_CIR_CSSF RCC_CIR_CSSF_Msk /*!< Clock Security System Interrupt flag */
-#define RCC_CIR_LSIRDYIE_Pos (8U)
-#define RCC_CIR_LSIRDYIE_Msk (0x1U << RCC_CIR_LSIRDYIE_Pos) /*!< 0x00000100 */
-#define RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE_Msk /*!< LSI Ready Interrupt Enable */
-#define RCC_CIR_LSERDYIE_Pos (9U)
-#define RCC_CIR_LSERDYIE_Msk (0x1U << RCC_CIR_LSERDYIE_Pos) /*!< 0x00000200 */
-#define RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE_Msk /*!< LSE Ready Interrupt Enable */
-#define RCC_CIR_HSIRDYIE_Pos (10U)
-#define RCC_CIR_HSIRDYIE_Msk (0x1U << RCC_CIR_HSIRDYIE_Pos) /*!< 0x00000400 */
-#define RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE_Msk /*!< HSI Ready Interrupt Enable */
-#define RCC_CIR_HSERDYIE_Pos (11U)
-#define RCC_CIR_HSERDYIE_Msk (0x1U << RCC_CIR_HSERDYIE_Pos) /*!< 0x00000800 */
-#define RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE_Msk /*!< HSE Ready Interrupt Enable */
-#define RCC_CIR_PLLRDYIE_Pos (12U)
-#define RCC_CIR_PLLRDYIE_Msk (0x1U << RCC_CIR_PLLRDYIE_Pos) /*!< 0x00001000 */
-#define RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE_Msk /*!< PLL Ready Interrupt Enable */
-#define RCC_CIR_LSIRDYC_Pos (16U)
-#define RCC_CIR_LSIRDYC_Msk (0x1U << RCC_CIR_LSIRDYC_Pos) /*!< 0x00010000 */
-#define RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC_Msk /*!< LSI Ready Interrupt Clear */
-#define RCC_CIR_LSERDYC_Pos (17U)
-#define RCC_CIR_LSERDYC_Msk (0x1U << RCC_CIR_LSERDYC_Pos) /*!< 0x00020000 */
-#define RCC_CIR_LSERDYC RCC_CIR_LSERDYC_Msk /*!< LSE Ready Interrupt Clear */
-#define RCC_CIR_HSIRDYC_Pos (18U)
-#define RCC_CIR_HSIRDYC_Msk (0x1U << RCC_CIR_HSIRDYC_Pos) /*!< 0x00040000 */
-#define RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC_Msk /*!< HSI Ready Interrupt Clear */
-#define RCC_CIR_HSERDYC_Pos (19U)
-#define RCC_CIR_HSERDYC_Msk (0x1U << RCC_CIR_HSERDYC_Pos) /*!< 0x00080000 */
-#define RCC_CIR_HSERDYC RCC_CIR_HSERDYC_Msk /*!< HSE Ready Interrupt Clear */
-#define RCC_CIR_PLLRDYC_Pos (20U)
-#define RCC_CIR_PLLRDYC_Msk (0x1U << RCC_CIR_PLLRDYC_Pos) /*!< 0x00100000 */
-#define RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC_Msk /*!< PLL Ready Interrupt Clear */
-#define RCC_CIR_CSSC_Pos (23U)
-#define RCC_CIR_CSSC_Msk (0x1U << RCC_CIR_CSSC_Pos) /*!< 0x00800000 */
-#define RCC_CIR_CSSC RCC_CIR_CSSC_Msk /*!< Clock Security System Interrupt Clear */
-
-
-/***************** Bit definition for RCC_APB2RSTR register *****************/
-#define RCC_APB2RSTR_AFIORST_Pos (0U)
-#define RCC_APB2RSTR_AFIORST_Msk (0x1U << RCC_APB2RSTR_AFIORST_Pos) /*!< 0x00000001 */
-#define RCC_APB2RSTR_AFIORST RCC_APB2RSTR_AFIORST_Msk /*!< Alternate Function I/O reset */
-#define RCC_APB2RSTR_IOPARST_Pos (2U)
-#define RCC_APB2RSTR_IOPARST_Msk (0x1U << RCC_APB2RSTR_IOPARST_Pos) /*!< 0x00000004 */
-#define RCC_APB2RSTR_IOPARST RCC_APB2RSTR_IOPARST_Msk /*!< I/O port A reset */
-#define RCC_APB2RSTR_IOPBRST_Pos (3U)
-#define RCC_APB2RSTR_IOPBRST_Msk (0x1U << RCC_APB2RSTR_IOPBRST_Pos) /*!< 0x00000008 */
-#define RCC_APB2RSTR_IOPBRST RCC_APB2RSTR_IOPBRST_Msk /*!< I/O port B reset */
-#define RCC_APB2RSTR_IOPCRST_Pos (4U)
-#define RCC_APB2RSTR_IOPCRST_Msk (0x1U << RCC_APB2RSTR_IOPCRST_Pos) /*!< 0x00000010 */
-#define RCC_APB2RSTR_IOPCRST RCC_APB2RSTR_IOPCRST_Msk /*!< I/O port C reset */
-#define RCC_APB2RSTR_IOPDRST_Pos (5U)
-#define RCC_APB2RSTR_IOPDRST_Msk (0x1U << RCC_APB2RSTR_IOPDRST_Pos) /*!< 0x00000020 */
-#define RCC_APB2RSTR_IOPDRST RCC_APB2RSTR_IOPDRST_Msk /*!< I/O port D reset */
-#define RCC_APB2RSTR_ADC1RST_Pos (9U)
-#define RCC_APB2RSTR_ADC1RST_Msk (0x1U << RCC_APB2RSTR_ADC1RST_Pos) /*!< 0x00000200 */
-#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADC1RST_Msk /*!< ADC 1 interface reset */
-
-#define RCC_APB2RSTR_ADC2RST_Pos (10U)
-#define RCC_APB2RSTR_ADC2RST_Msk (0x1U << RCC_APB2RSTR_ADC2RST_Pos) /*!< 0x00000400 */
-#define RCC_APB2RSTR_ADC2RST RCC_APB2RSTR_ADC2RST_Msk /*!< ADC 2 interface reset */
-
-#define RCC_APB2RSTR_TIM1RST_Pos (11U)
-#define RCC_APB2RSTR_TIM1RST_Msk (0x1U << RCC_APB2RSTR_TIM1RST_Pos) /*!< 0x00000800 */
-#define RCC_APB2RSTR_TIM1RST RCC_APB2RSTR_TIM1RST_Msk /*!< TIM1 Timer reset */
-#define RCC_APB2RSTR_SPI1RST_Pos (12U)
-#define RCC_APB2RSTR_SPI1RST_Msk (0x1U << RCC_APB2RSTR_SPI1RST_Pos) /*!< 0x00001000 */
-#define RCC_APB2RSTR_SPI1RST RCC_APB2RSTR_SPI1RST_Msk /*!< SPI 1 reset */
-#define RCC_APB2RSTR_USART1RST_Pos (14U)
-#define RCC_APB2RSTR_USART1RST_Msk (0x1U << RCC_APB2RSTR_USART1RST_Pos) /*!< 0x00004000 */
-#define RCC_APB2RSTR_USART1RST RCC_APB2RSTR_USART1RST_Msk /*!< USART1 reset */
-
-
-
-
-
-
-/***************** Bit definition for RCC_APB1RSTR register *****************/
-#define RCC_APB1RSTR_TIM2RST_Pos (0U)
-#define RCC_APB1RSTR_TIM2RST_Msk (0x1U << RCC_APB1RSTR_TIM2RST_Pos) /*!< 0x00000001 */
-#define RCC_APB1RSTR_TIM2RST RCC_APB1RSTR_TIM2RST_Msk /*!< Timer 2 reset */
-#define RCC_APB1RSTR_TIM3RST_Pos (1U)
-#define RCC_APB1RSTR_TIM3RST_Msk (0x1U << RCC_APB1RSTR_TIM3RST_Pos) /*!< 0x00000002 */
-#define RCC_APB1RSTR_TIM3RST RCC_APB1RSTR_TIM3RST_Msk /*!< Timer 3 reset */
-#define RCC_APB1RSTR_WWDGRST_Pos (11U)
-#define RCC_APB1RSTR_WWDGRST_Msk (0x1U << RCC_APB1RSTR_WWDGRST_Pos) /*!< 0x00000800 */
-#define RCC_APB1RSTR_WWDGRST RCC_APB1RSTR_WWDGRST_Msk /*!< Window Watchdog reset */
-#define RCC_APB1RSTR_USART2RST_Pos (17U)
-#define RCC_APB1RSTR_USART2RST_Msk (0x1U << RCC_APB1RSTR_USART2RST_Pos) /*!< 0x00020000 */
-#define RCC_APB1RSTR_USART2RST RCC_APB1RSTR_USART2RST_Msk /*!< USART 2 reset */
-#define RCC_APB1RSTR_I2C1RST_Pos (21U)
-#define RCC_APB1RSTR_I2C1RST_Msk (0x1U << RCC_APB1RSTR_I2C1RST_Pos) /*!< 0x00200000 */
-#define RCC_APB1RSTR_I2C1RST RCC_APB1RSTR_I2C1RST_Msk /*!< I2C 1 reset */
-
-#define RCC_APB1RSTR_CAN1RST_Pos (25U)
-#define RCC_APB1RSTR_CAN1RST_Msk (0x1U << RCC_APB1RSTR_CAN1RST_Pos) /*!< 0x02000000 */
-#define RCC_APB1RSTR_CAN1RST RCC_APB1RSTR_CAN1RST_Msk /*!< CAN1 reset */
-
-#define RCC_APB1RSTR_BKPRST_Pos (27U)
-#define RCC_APB1RSTR_BKPRST_Msk (0x1U << RCC_APB1RSTR_BKPRST_Pos) /*!< 0x08000000 */
-#define RCC_APB1RSTR_BKPRST RCC_APB1RSTR_BKPRST_Msk /*!< Backup interface reset */
-#define RCC_APB1RSTR_PWRRST_Pos (28U)
-#define RCC_APB1RSTR_PWRRST_Msk (0x1U << RCC_APB1RSTR_PWRRST_Pos) /*!< 0x10000000 */
-#define RCC_APB1RSTR_PWRRST RCC_APB1RSTR_PWRRST_Msk /*!< Power interface reset */
-
-
-#define RCC_APB1RSTR_USBRST_Pos (23U)
-#define RCC_APB1RSTR_USBRST_Msk (0x1U << RCC_APB1RSTR_USBRST_Pos) /*!< 0x00800000 */
-#define RCC_APB1RSTR_USBRST RCC_APB1RSTR_USBRST_Msk /*!< USB Device reset */
-
-
-
-
-
-
-/****************** Bit definition for RCC_AHBENR register ******************/
-#define RCC_AHBENR_DMA1EN_Pos (0U)
-#define RCC_AHBENR_DMA1EN_Msk (0x1U << RCC_AHBENR_DMA1EN_Pos) /*!< 0x00000001 */
-#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMA1EN_Msk /*!< DMA1 clock enable */
-#define RCC_AHBENR_SRAMEN_Pos (2U)
-#define RCC_AHBENR_SRAMEN_Msk (0x1U << RCC_AHBENR_SRAMEN_Pos) /*!< 0x00000004 */
-#define RCC_AHBENR_SRAMEN RCC_AHBENR_SRAMEN_Msk /*!< SRAM interface clock enable */
-#define RCC_AHBENR_FLITFEN_Pos (4U)
-#define RCC_AHBENR_FLITFEN_Msk (0x1U << RCC_AHBENR_FLITFEN_Pos) /*!< 0x00000010 */
-#define RCC_AHBENR_FLITFEN RCC_AHBENR_FLITFEN_Msk /*!< FLITF clock enable */
-#define RCC_AHBENR_CRCEN_Pos (6U)
-#define RCC_AHBENR_CRCEN_Msk (0x1U << RCC_AHBENR_CRCEN_Pos) /*!< 0x00000040 */
-#define RCC_AHBENR_CRCEN RCC_AHBENR_CRCEN_Msk /*!< CRC clock enable */
-
-
-
-
-/****************** Bit definition for RCC_APB2ENR register *****************/
-#define RCC_APB2ENR_AFIOEN_Pos (0U)
-#define RCC_APB2ENR_AFIOEN_Msk (0x1U << RCC_APB2ENR_AFIOEN_Pos) /*!< 0x00000001 */
-#define RCC_APB2ENR_AFIOEN RCC_APB2ENR_AFIOEN_Msk /*!< Alternate Function I/O clock enable */
-#define RCC_APB2ENR_IOPAEN_Pos (2U)
-#define RCC_APB2ENR_IOPAEN_Msk (0x1U << RCC_APB2ENR_IOPAEN_Pos) /*!< 0x00000004 */
-#define RCC_APB2ENR_IOPAEN RCC_APB2ENR_IOPAEN_Msk /*!< I/O port A clock enable */
-#define RCC_APB2ENR_IOPBEN_Pos (3U)
-#define RCC_APB2ENR_IOPBEN_Msk (0x1U << RCC_APB2ENR_IOPBEN_Pos) /*!< 0x00000008 */
-#define RCC_APB2ENR_IOPBEN RCC_APB2ENR_IOPBEN_Msk /*!< I/O port B clock enable */
-#define RCC_APB2ENR_IOPCEN_Pos (4U)
-#define RCC_APB2ENR_IOPCEN_Msk (0x1U << RCC_APB2ENR_IOPCEN_Pos) /*!< 0x00000010 */
-#define RCC_APB2ENR_IOPCEN RCC_APB2ENR_IOPCEN_Msk /*!< I/O port C clock enable */
-#define RCC_APB2ENR_IOPDEN_Pos (5U)
-#define RCC_APB2ENR_IOPDEN_Msk (0x1U << RCC_APB2ENR_IOPDEN_Pos) /*!< 0x00000020 */
-#define RCC_APB2ENR_IOPDEN RCC_APB2ENR_IOPDEN_Msk /*!< I/O port D clock enable */
-#define RCC_APB2ENR_ADC1EN_Pos (9U)
-#define RCC_APB2ENR_ADC1EN_Msk (0x1U << RCC_APB2ENR_ADC1EN_Pos) /*!< 0x00000200 */
-#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADC1EN_Msk /*!< ADC 1 interface clock enable */
-
-#define RCC_APB2ENR_ADC2EN_Pos (10U)
-#define RCC_APB2ENR_ADC2EN_Msk (0x1U << RCC_APB2ENR_ADC2EN_Pos) /*!< 0x00000400 */
-#define RCC_APB2ENR_ADC2EN RCC_APB2ENR_ADC2EN_Msk /*!< ADC 2 interface clock enable */
-
-#define RCC_APB2ENR_TIM1EN_Pos (11U)
-#define RCC_APB2ENR_TIM1EN_Msk (0x1U << RCC_APB2ENR_TIM1EN_Pos) /*!< 0x00000800 */
-#define RCC_APB2ENR_TIM1EN RCC_APB2ENR_TIM1EN_Msk /*!< TIM1 Timer clock enable */
-#define RCC_APB2ENR_SPI1EN_Pos (12U)
-#define RCC_APB2ENR_SPI1EN_Msk (0x1U << RCC_APB2ENR_SPI1EN_Pos) /*!< 0x00001000 */
-#define RCC_APB2ENR_SPI1EN RCC_APB2ENR_SPI1EN_Msk /*!< SPI 1 clock enable */
-#define RCC_APB2ENR_USART1EN_Pos (14U)
-#define RCC_APB2ENR_USART1EN_Msk (0x1U << RCC_APB2ENR_USART1EN_Pos) /*!< 0x00004000 */
-#define RCC_APB2ENR_USART1EN RCC_APB2ENR_USART1EN_Msk /*!< USART1 clock enable */
-
-
-
-
-
-
-/***************** Bit definition for RCC_APB1ENR register ******************/
-#define RCC_APB1ENR_TIM2EN_Pos (0U)
-#define RCC_APB1ENR_TIM2EN_Msk (0x1U << RCC_APB1ENR_TIM2EN_Pos) /*!< 0x00000001 */
-#define RCC_APB1ENR_TIM2EN RCC_APB1ENR_TIM2EN_Msk /*!< Timer 2 clock enabled*/
-#define RCC_APB1ENR_TIM3EN_Pos (1U)
-#define RCC_APB1ENR_TIM3EN_Msk (0x1U << RCC_APB1ENR_TIM3EN_Pos) /*!< 0x00000002 */
-#define RCC_APB1ENR_TIM3EN RCC_APB1ENR_TIM3EN_Msk /*!< Timer 3 clock enable */
-#define RCC_APB1ENR_WWDGEN_Pos (11U)
-#define RCC_APB1ENR_WWDGEN_Msk (0x1U << RCC_APB1ENR_WWDGEN_Pos) /*!< 0x00000800 */
-#define RCC_APB1ENR_WWDGEN RCC_APB1ENR_WWDGEN_Msk /*!< Window Watchdog clock enable */
-#define RCC_APB1ENR_USART2EN_Pos (17U)
-#define RCC_APB1ENR_USART2EN_Msk (0x1U << RCC_APB1ENR_USART2EN_Pos) /*!< 0x00020000 */
-#define RCC_APB1ENR_USART2EN RCC_APB1ENR_USART2EN_Msk /*!< USART 2 clock enable */
-#define RCC_APB1ENR_I2C1EN_Pos (21U)
-#define RCC_APB1ENR_I2C1EN_Msk (0x1U << RCC_APB1ENR_I2C1EN_Pos) /*!< 0x00200000 */
-#define RCC_APB1ENR_I2C1EN RCC_APB1ENR_I2C1EN_Msk /*!< I2C 1 clock enable */
-
-#define RCC_APB1ENR_CAN1EN_Pos (25U)
-#define RCC_APB1ENR_CAN1EN_Msk (0x1U << RCC_APB1ENR_CAN1EN_Pos) /*!< 0x02000000 */
-#define RCC_APB1ENR_CAN1EN RCC_APB1ENR_CAN1EN_Msk /*!< CAN1 clock enable */
-
-#define RCC_APB1ENR_BKPEN_Pos (27U)
-#define RCC_APB1ENR_BKPEN_Msk (0x1U << RCC_APB1ENR_BKPEN_Pos) /*!< 0x08000000 */
-#define RCC_APB1ENR_BKPEN RCC_APB1ENR_BKPEN_Msk /*!< Backup interface clock enable */
-#define RCC_APB1ENR_PWREN_Pos (28U)
-#define RCC_APB1ENR_PWREN_Msk (0x1U << RCC_APB1ENR_PWREN_Pos) /*!< 0x10000000 */
-#define RCC_APB1ENR_PWREN RCC_APB1ENR_PWREN_Msk /*!< Power interface clock enable */
-
-
-#define RCC_APB1ENR_USBEN_Pos (23U)
-#define RCC_APB1ENR_USBEN_Msk (0x1U << RCC_APB1ENR_USBEN_Pos) /*!< 0x00800000 */
-#define RCC_APB1ENR_USBEN RCC_APB1ENR_USBEN_Msk /*!< USB Device clock enable */
-
-
-
-
-
-
-/******************* Bit definition for RCC_BDCR register *******************/
-#define RCC_BDCR_LSEON_Pos (0U)
-#define RCC_BDCR_LSEON_Msk (0x1U << RCC_BDCR_LSEON_Pos) /*!< 0x00000001 */
-#define RCC_BDCR_LSEON RCC_BDCR_LSEON_Msk /*!< External Low Speed oscillator enable */
-#define RCC_BDCR_LSERDY_Pos (1U)
-#define RCC_BDCR_LSERDY_Msk (0x1U << RCC_BDCR_LSERDY_Pos) /*!< 0x00000002 */
-#define RCC_BDCR_LSERDY RCC_BDCR_LSERDY_Msk /*!< External Low Speed oscillator Ready */
-#define RCC_BDCR_LSEBYP_Pos (2U)
-#define RCC_BDCR_LSEBYP_Msk (0x1U << RCC_BDCR_LSEBYP_Pos) /*!< 0x00000004 */
-#define RCC_BDCR_LSEBYP RCC_BDCR_LSEBYP_Msk /*!< External Low Speed oscillator Bypass */
-
-#define RCC_BDCR_RTCSEL_Pos (8U)
-#define RCC_BDCR_RTCSEL_Msk (0x3U << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000300 */
-#define RCC_BDCR_RTCSEL RCC_BDCR_RTCSEL_Msk /*!< RTCSEL[1:0] bits (RTC clock source selection) */
-#define RCC_BDCR_RTCSEL_0 (0x1U << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000100 */
-#define RCC_BDCR_RTCSEL_1 (0x2U << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000200 */
-
-/*!< RTC congiguration */
-#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
-#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */
-#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */
-#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */
-
-#define RCC_BDCR_RTCEN_Pos (15U)
-#define RCC_BDCR_RTCEN_Msk (0x1U << RCC_BDCR_RTCEN_Pos) /*!< 0x00008000 */
-#define RCC_BDCR_RTCEN RCC_BDCR_RTCEN_Msk /*!< RTC clock enable */
-#define RCC_BDCR_BDRST_Pos (16U)
-#define RCC_BDCR_BDRST_Msk (0x1U << RCC_BDCR_BDRST_Pos) /*!< 0x00010000 */
-#define RCC_BDCR_BDRST RCC_BDCR_BDRST_Msk /*!< Backup domain software reset */
-
-/******************* Bit definition for RCC_CSR register ********************/
-#define RCC_CSR_LSION_Pos (0U)
-#define RCC_CSR_LSION_Msk (0x1U << RCC_CSR_LSION_Pos) /*!< 0x00000001 */
-#define RCC_CSR_LSION RCC_CSR_LSION_Msk /*!< Internal Low Speed oscillator enable */
-#define RCC_CSR_LSIRDY_Pos (1U)
-#define RCC_CSR_LSIRDY_Msk (0x1U << RCC_CSR_LSIRDY_Pos) /*!< 0x00000002 */
-#define RCC_CSR_LSIRDY RCC_CSR_LSIRDY_Msk /*!< Internal Low Speed oscillator Ready */
-#define RCC_CSR_RMVF_Pos (24U)
-#define RCC_CSR_RMVF_Msk (0x1U << RCC_CSR_RMVF_Pos) /*!< 0x01000000 */
-#define RCC_CSR_RMVF RCC_CSR_RMVF_Msk /*!< Remove reset flag */
-#define RCC_CSR_PINRSTF_Pos (26U)
-#define RCC_CSR_PINRSTF_Msk (0x1U << RCC_CSR_PINRSTF_Pos) /*!< 0x04000000 */
-#define RCC_CSR_PINRSTF RCC_CSR_PINRSTF_Msk /*!< PIN reset flag */
-#define RCC_CSR_PORRSTF_Pos (27U)
-#define RCC_CSR_PORRSTF_Msk (0x1U << RCC_CSR_PORRSTF_Pos) /*!< 0x08000000 */
-#define RCC_CSR_PORRSTF RCC_CSR_PORRSTF_Msk /*!< POR/PDR reset flag */
-#define RCC_CSR_SFTRSTF_Pos (28U)
-#define RCC_CSR_SFTRSTF_Msk (0x1U << RCC_CSR_SFTRSTF_Pos) /*!< 0x10000000 */
-#define RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF_Msk /*!< Software Reset flag */
-#define RCC_CSR_IWDGRSTF_Pos (29U)
-#define RCC_CSR_IWDGRSTF_Msk (0x1U << RCC_CSR_IWDGRSTF_Pos) /*!< 0x20000000 */
-#define RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF_Msk /*!< Independent Watchdog reset flag */
-#define RCC_CSR_WWDGRSTF_Pos (30U)
-#define RCC_CSR_WWDGRSTF_Msk (0x1U << RCC_CSR_WWDGRSTF_Pos) /*!< 0x40000000 */
-#define RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF_Msk /*!< Window watchdog reset flag */
-#define RCC_CSR_LPWRRSTF_Pos (31U)
-#define RCC_CSR_LPWRRSTF_Msk (0x1U << RCC_CSR_LPWRRSTF_Pos) /*!< 0x80000000 */
-#define RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF_Msk /*!< Low-Power reset flag */
-
-
-
-/******************************************************************************/
-/* */
-/* General Purpose and Alternate Function I/O */
-/* */
-/******************************************************************************/
-
-/******************* Bit definition for GPIO_CRL register *******************/
-#define GPIO_CRL_MODE_Pos (0U)
-#define GPIO_CRL_MODE_Msk (0x33333333U << GPIO_CRL_MODE_Pos) /*!< 0x33333333 */
-#define GPIO_CRL_MODE GPIO_CRL_MODE_Msk /*!< Port x mode bits */
-
-#define GPIO_CRL_MODE0_Pos (0U)
-#define GPIO_CRL_MODE0_Msk (0x3U << GPIO_CRL_MODE0_Pos) /*!< 0x00000003 */
-#define GPIO_CRL_MODE0 GPIO_CRL_MODE0_Msk /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */
-#define GPIO_CRL_MODE0_0 (0x1U << GPIO_CRL_MODE0_Pos) /*!< 0x00000001 */
-#define GPIO_CRL_MODE0_1 (0x2U << GPIO_CRL_MODE0_Pos) /*!< 0x00000002 */
-
-#define GPIO_CRL_MODE1_Pos (4U)
-#define GPIO_CRL_MODE1_Msk (0x3U << GPIO_CRL_MODE1_Pos) /*!< 0x00000030 */
-#define GPIO_CRL_MODE1 GPIO_CRL_MODE1_Msk /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */
-#define GPIO_CRL_MODE1_0 (0x1U << GPIO_CRL_MODE1_Pos) /*!< 0x00000010 */
-#define GPIO_CRL_MODE1_1 (0x2U << GPIO_CRL_MODE1_Pos) /*!< 0x00000020 */
-
-#define GPIO_CRL_MODE2_Pos (8U)
-#define GPIO_CRL_MODE2_Msk (0x3U << GPIO_CRL_MODE2_Pos) /*!< 0x00000300 */
-#define GPIO_CRL_MODE2 GPIO_CRL_MODE2_Msk /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */
-#define GPIO_CRL_MODE2_0 (0x1U << GPIO_CRL_MODE2_Pos) /*!< 0x00000100 */
-#define GPIO_CRL_MODE2_1 (0x2U << GPIO_CRL_MODE2_Pos) /*!< 0x00000200 */
-
-#define GPIO_CRL_MODE3_Pos (12U)
-#define GPIO_CRL_MODE3_Msk (0x3U << GPIO_CRL_MODE3_Pos) /*!< 0x00003000 */
-#define GPIO_CRL_MODE3 GPIO_CRL_MODE3_Msk /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */
-#define GPIO_CRL_MODE3_0 (0x1U << GPIO_CRL_MODE3_Pos) /*!< 0x00001000 */
-#define GPIO_CRL_MODE3_1 (0x2U << GPIO_CRL_MODE3_Pos) /*!< 0x00002000 */
-
-#define GPIO_CRL_MODE4_Pos (16U)
-#define GPIO_CRL_MODE4_Msk (0x3U << GPIO_CRL_MODE4_Pos) /*!< 0x00030000 */
-#define GPIO_CRL_MODE4 GPIO_CRL_MODE4_Msk /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */
-#define GPIO_CRL_MODE4_0 (0x1U << GPIO_CRL_MODE4_Pos) /*!< 0x00010000 */
-#define GPIO_CRL_MODE4_1 (0x2U << GPIO_CRL_MODE4_Pos) /*!< 0x00020000 */
-
-#define GPIO_CRL_MODE5_Pos (20U)
-#define GPIO_CRL_MODE5_Msk (0x3U << GPIO_CRL_MODE5_Pos) /*!< 0x00300000 */
-#define GPIO_CRL_MODE5 GPIO_CRL_MODE5_Msk /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */
-#define GPIO_CRL_MODE5_0 (0x1U << GPIO_CRL_MODE5_Pos) /*!< 0x00100000 */
-#define GPIO_CRL_MODE5_1 (0x2U << GPIO_CRL_MODE5_Pos) /*!< 0x00200000 */
-
-#define GPIO_CRL_MODE6_Pos (24U)
-#define GPIO_CRL_MODE6_Msk (0x3U << GPIO_CRL_MODE6_Pos) /*!< 0x03000000 */
-#define GPIO_CRL_MODE6 GPIO_CRL_MODE6_Msk /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */
-#define GPIO_CRL_MODE6_0 (0x1U << GPIO_CRL_MODE6_Pos) /*!< 0x01000000 */
-#define GPIO_CRL_MODE6_1 (0x2U << GPIO_CRL_MODE6_Pos) /*!< 0x02000000 */
-
-#define GPIO_CRL_MODE7_Pos (28U)
-#define GPIO_CRL_MODE7_Msk (0x3U << GPIO_CRL_MODE7_Pos) /*!< 0x30000000 */
-#define GPIO_CRL_MODE7 GPIO_CRL_MODE7_Msk /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */
-#define GPIO_CRL_MODE7_0 (0x1U << GPIO_CRL_MODE7_Pos) /*!< 0x10000000 */
-#define GPIO_CRL_MODE7_1 (0x2U << GPIO_CRL_MODE7_Pos) /*!< 0x20000000 */
-
-#define GPIO_CRL_CNF_Pos (2U)
-#define GPIO_CRL_CNF_Msk (0x33333333U << GPIO_CRL_CNF_Pos) /*!< 0xCCCCCCCC */
-#define GPIO_CRL_CNF GPIO_CRL_CNF_Msk /*!< Port x configuration bits */
-
-#define GPIO_CRL_CNF0_Pos (2U)
-#define GPIO_CRL_CNF0_Msk (0x3U << GPIO_CRL_CNF0_Pos) /*!< 0x0000000C */
-#define GPIO_CRL_CNF0 GPIO_CRL_CNF0_Msk /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */
-#define GPIO_CRL_CNF0_0 (0x1U << GPIO_CRL_CNF0_Pos) /*!< 0x00000004 */
-#define GPIO_CRL_CNF0_1 (0x2U << GPIO_CRL_CNF0_Pos) /*!< 0x00000008 */
-
-#define GPIO_CRL_CNF1_Pos (6U)
-#define GPIO_CRL_CNF1_Msk (0x3U << GPIO_CRL_CNF1_Pos) /*!< 0x000000C0 */
-#define GPIO_CRL_CNF1 GPIO_CRL_CNF1_Msk /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */
-#define GPIO_CRL_CNF1_0 (0x1U << GPIO_CRL_CNF1_Pos) /*!< 0x00000040 */
-#define GPIO_CRL_CNF1_1 (0x2U << GPIO_CRL_CNF1_Pos) /*!< 0x00000080 */
-
-#define GPIO_CRL_CNF2_Pos (10U)
-#define GPIO_CRL_CNF2_Msk (0x3U << GPIO_CRL_CNF2_Pos) /*!< 0x00000C00 */
-#define GPIO_CRL_CNF2 GPIO_CRL_CNF2_Msk /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */
-#define GPIO_CRL_CNF2_0 (0x1U << GPIO_CRL_CNF2_Pos) /*!< 0x00000400 */
-#define GPIO_CRL_CNF2_1 (0x2U << GPIO_CRL_CNF2_Pos) /*!< 0x00000800 */
-
-#define GPIO_CRL_CNF3_Pos (14U)
-#define GPIO_CRL_CNF3_Msk (0x3U << GPIO_CRL_CNF3_Pos) /*!< 0x0000C000 */
-#define GPIO_CRL_CNF3 GPIO_CRL_CNF3_Msk /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */
-#define GPIO_CRL_CNF3_0 (0x1U << GPIO_CRL_CNF3_Pos) /*!< 0x00004000 */
-#define GPIO_CRL_CNF3_1 (0x2U << GPIO_CRL_CNF3_Pos) /*!< 0x00008000 */
-
-#define GPIO_CRL_CNF4_Pos (18U)
-#define GPIO_CRL_CNF4_Msk (0x3U << GPIO_CRL_CNF4_Pos) /*!< 0x000C0000 */
-#define GPIO_CRL_CNF4 GPIO_CRL_CNF4_Msk /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */
-#define GPIO_CRL_CNF4_0 (0x1U << GPIO_CRL_CNF4_Pos) /*!< 0x00040000 */
-#define GPIO_CRL_CNF4_1 (0x2U << GPIO_CRL_CNF4_Pos) /*!< 0x00080000 */
-
-#define GPIO_CRL_CNF5_Pos (22U)
-#define GPIO_CRL_CNF5_Msk (0x3U << GPIO_CRL_CNF5_Pos) /*!< 0x00C00000 */
-#define GPIO_CRL_CNF5 GPIO_CRL_CNF5_Msk /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */
-#define GPIO_CRL_CNF5_0 (0x1U << GPIO_CRL_CNF5_Pos) /*!< 0x00400000 */
-#define GPIO_CRL_CNF5_1 (0x2U << GPIO_CRL_CNF5_Pos) /*!< 0x00800000 */
-
-#define GPIO_CRL_CNF6_Pos (26U)
-#define GPIO_CRL_CNF6_Msk (0x3U << GPIO_CRL_CNF6_Pos) /*!< 0x0C000000 */
-#define GPIO_CRL_CNF6 GPIO_CRL_CNF6_Msk /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */
-#define GPIO_CRL_CNF6_0 (0x1U << GPIO_CRL_CNF6_Pos) /*!< 0x04000000 */
-#define GPIO_CRL_CNF6_1 (0x2U << GPIO_CRL_CNF6_Pos) /*!< 0x08000000 */
-
-#define GPIO_CRL_CNF7_Pos (30U)
-#define GPIO_CRL_CNF7_Msk (0x3U << GPIO_CRL_CNF7_Pos) /*!< 0xC0000000 */
-#define GPIO_CRL_CNF7 GPIO_CRL_CNF7_Msk /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */
-#define GPIO_CRL_CNF7_0 (0x1U << GPIO_CRL_CNF7_Pos) /*!< 0x40000000 */
-#define GPIO_CRL_CNF7_1 (0x2U << GPIO_CRL_CNF7_Pos) /*!< 0x80000000 */
-
-/******************* Bit definition for GPIO_CRH register *******************/
-#define GPIO_CRH_MODE_Pos (0U)
-#define GPIO_CRH_MODE_Msk (0x33333333U << GPIO_CRH_MODE_Pos) /*!< 0x33333333 */
-#define GPIO_CRH_MODE GPIO_CRH_MODE_Msk /*!< Port x mode bits */
-
-#define GPIO_CRH_MODE8_Pos (0U)
-#define GPIO_CRH_MODE8_Msk (0x3U << GPIO_CRH_MODE8_Pos) /*!< 0x00000003 */
-#define GPIO_CRH_MODE8 GPIO_CRH_MODE8_Msk /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */
-#define GPIO_CRH_MODE8_0 (0x1U << GPIO_CRH_MODE8_Pos) /*!< 0x00000001 */
-#define GPIO_CRH_MODE8_1 (0x2U << GPIO_CRH_MODE8_Pos) /*!< 0x00000002 */
-
-#define GPIO_CRH_MODE9_Pos (4U)
-#define GPIO_CRH_MODE9_Msk (0x3U << GPIO_CRH_MODE9_Pos) /*!< 0x00000030 */
-#define GPIO_CRH_MODE9 GPIO_CRH_MODE9_Msk /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */
-#define GPIO_CRH_MODE9_0 (0x1U << GPIO_CRH_MODE9_Pos) /*!< 0x00000010 */
-#define GPIO_CRH_MODE9_1 (0x2U << GPIO_CRH_MODE9_Pos) /*!< 0x00000020 */
-
-#define GPIO_CRH_MODE10_Pos (8U)
-#define GPIO_CRH_MODE10_Msk (0x3U << GPIO_CRH_MODE10_Pos) /*!< 0x00000300 */
-#define GPIO_CRH_MODE10 GPIO_CRH_MODE10_Msk /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */
-#define GPIO_CRH_MODE10_0 (0x1U << GPIO_CRH_MODE10_Pos) /*!< 0x00000100 */
-#define GPIO_CRH_MODE10_1 (0x2U << GPIO_CRH_MODE10_Pos) /*!< 0x00000200 */
-
-#define GPIO_CRH_MODE11_Pos (12U)
-#define GPIO_CRH_MODE11_Msk (0x3U << GPIO_CRH_MODE11_Pos) /*!< 0x00003000 */
-#define GPIO_CRH_MODE11 GPIO_CRH_MODE11_Msk /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */
-#define GPIO_CRH_MODE11_0 (0x1U << GPIO_CRH_MODE11_Pos) /*!< 0x00001000 */
-#define GPIO_CRH_MODE11_1 (0x2U << GPIO_CRH_MODE11_Pos) /*!< 0x00002000 */
-
-#define GPIO_CRH_MODE12_Pos (16U)
-#define GPIO_CRH_MODE12_Msk (0x3U << GPIO_CRH_MODE12_Pos) /*!< 0x00030000 */
-#define GPIO_CRH_MODE12 GPIO_CRH_MODE12_Msk /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */
-#define GPIO_CRH_MODE12_0 (0x1U << GPIO_CRH_MODE12_Pos) /*!< 0x00010000 */
-#define GPIO_CRH_MODE12_1 (0x2U << GPIO_CRH_MODE12_Pos) /*!< 0x00020000 */
-
-#define GPIO_CRH_MODE13_Pos (20U)
-#define GPIO_CRH_MODE13_Msk (0x3U << GPIO_CRH_MODE13_Pos) /*!< 0x00300000 */
-#define GPIO_CRH_MODE13 GPIO_CRH_MODE13_Msk /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */
-#define GPIO_CRH_MODE13_0 (0x1U << GPIO_CRH_MODE13_Pos) /*!< 0x00100000 */
-#define GPIO_CRH_MODE13_1 (0x2U << GPIO_CRH_MODE13_Pos) /*!< 0x00200000 */
-
-#define GPIO_CRH_MODE14_Pos (24U)
-#define GPIO_CRH_MODE14_Msk (0x3U << GPIO_CRH_MODE14_Pos) /*!< 0x03000000 */
-#define GPIO_CRH_MODE14 GPIO_CRH_MODE14_Msk /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */
-#define GPIO_CRH_MODE14_0 (0x1U << GPIO_CRH_MODE14_Pos) /*!< 0x01000000 */
-#define GPIO_CRH_MODE14_1 (0x2U << GPIO_CRH_MODE14_Pos) /*!< 0x02000000 */
-
-#define GPIO_CRH_MODE15_Pos (28U)
-#define GPIO_CRH_MODE15_Msk (0x3U << GPIO_CRH_MODE15_Pos) /*!< 0x30000000 */
-#define GPIO_CRH_MODE15 GPIO_CRH_MODE15_Msk /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */
-#define GPIO_CRH_MODE15_0 (0x1U << GPIO_CRH_MODE15_Pos) /*!< 0x10000000 */
-#define GPIO_CRH_MODE15_1 (0x2U << GPIO_CRH_MODE15_Pos) /*!< 0x20000000 */
-
-#define GPIO_CRH_CNF_Pos (2U)
-#define GPIO_CRH_CNF_Msk (0x33333333U << GPIO_CRH_CNF_Pos) /*!< 0xCCCCCCCC */
-#define GPIO_CRH_CNF GPIO_CRH_CNF_Msk /*!< Port x configuration bits */
-
-#define GPIO_CRH_CNF8_Pos (2U)
-#define GPIO_CRH_CNF8_Msk (0x3U << GPIO_CRH_CNF8_Pos) /*!< 0x0000000C */
-#define GPIO_CRH_CNF8 GPIO_CRH_CNF8_Msk /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */
-#define GPIO_CRH_CNF8_0 (0x1U << GPIO_CRH_CNF8_Pos) /*!< 0x00000004 */
-#define GPIO_CRH_CNF8_1 (0x2U << GPIO_CRH_CNF8_Pos) /*!< 0x00000008 */
-
-#define GPIO_CRH_CNF9_Pos (6U)
-#define GPIO_CRH_CNF9_Msk (0x3U << GPIO_CRH_CNF9_Pos) /*!< 0x000000C0 */
-#define GPIO_CRH_CNF9 GPIO_CRH_CNF9_Msk /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */
-#define GPIO_CRH_CNF9_0 (0x1U << GPIO_CRH_CNF9_Pos) /*!< 0x00000040 */
-#define GPIO_CRH_CNF9_1 (0x2U << GPIO_CRH_CNF9_Pos) /*!< 0x00000080 */
-
-#define GPIO_CRH_CNF10_Pos (10U)
-#define GPIO_CRH_CNF10_Msk (0x3U << GPIO_CRH_CNF10_Pos) /*!< 0x00000C00 */
-#define GPIO_CRH_CNF10 GPIO_CRH_CNF10_Msk /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */
-#define GPIO_CRH_CNF10_0 (0x1U << GPIO_CRH_CNF10_Pos) /*!< 0x00000400 */
-#define GPIO_CRH_CNF10_1 (0x2U << GPIO_CRH_CNF10_Pos) /*!< 0x00000800 */
-
-#define GPIO_CRH_CNF11_Pos (14U)
-#define GPIO_CRH_CNF11_Msk (0x3U << GPIO_CRH_CNF11_Pos) /*!< 0x0000C000 */
-#define GPIO_CRH_CNF11 GPIO_CRH_CNF11_Msk /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */
-#define GPIO_CRH_CNF11_0 (0x1U << GPIO_CRH_CNF11_Pos) /*!< 0x00004000 */
-#define GPIO_CRH_CNF11_1 (0x2U << GPIO_CRH_CNF11_Pos) /*!< 0x00008000 */
-
-#define GPIO_CRH_CNF12_Pos (18U)
-#define GPIO_CRH_CNF12_Msk (0x3U << GPIO_CRH_CNF12_Pos) /*!< 0x000C0000 */
-#define GPIO_CRH_CNF12 GPIO_CRH_CNF12_Msk /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */
-#define GPIO_CRH_CNF12_0 (0x1U << GPIO_CRH_CNF12_Pos) /*!< 0x00040000 */
-#define GPIO_CRH_CNF12_1 (0x2U << GPIO_CRH_CNF12_Pos) /*!< 0x00080000 */
-
-#define GPIO_CRH_CNF13_Pos (22U)
-#define GPIO_CRH_CNF13_Msk (0x3U << GPIO_CRH_CNF13_Pos) /*!< 0x00C00000 */
-#define GPIO_CRH_CNF13 GPIO_CRH_CNF13_Msk /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */
-#define GPIO_CRH_CNF13_0 (0x1U << GPIO_CRH_CNF13_Pos) /*!< 0x00400000 */
-#define GPIO_CRH_CNF13_1 (0x2U << GPIO_CRH_CNF13_Pos) /*!< 0x00800000 */
-
-#define GPIO_CRH_CNF14_Pos (26U)
-#define GPIO_CRH_CNF14_Msk (0x3U << GPIO_CRH_CNF14_Pos) /*!< 0x0C000000 */
-#define GPIO_CRH_CNF14 GPIO_CRH_CNF14_Msk /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */
-#define GPIO_CRH_CNF14_0 (0x1U << GPIO_CRH_CNF14_Pos) /*!< 0x04000000 */
-#define GPIO_CRH_CNF14_1 (0x2U << GPIO_CRH_CNF14_Pos) /*!< 0x08000000 */
-
-#define GPIO_CRH_CNF15_Pos (30U)
-#define GPIO_CRH_CNF15_Msk (0x3U << GPIO_CRH_CNF15_Pos) /*!< 0xC0000000 */
-#define GPIO_CRH_CNF15 GPIO_CRH_CNF15_Msk /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */
-#define GPIO_CRH_CNF15_0 (0x1U << GPIO_CRH_CNF15_Pos) /*!< 0x40000000 */
-#define GPIO_CRH_CNF15_1 (0x2U << GPIO_CRH_CNF15_Pos) /*!< 0x80000000 */
-
-/*!<****************** Bit definition for GPIO_IDR register *******************/
-#define GPIO_IDR_IDR0_Pos (0U)
-#define GPIO_IDR_IDR0_Msk (0x1U << GPIO_IDR_IDR0_Pos) /*!< 0x00000001 */
-#define GPIO_IDR_IDR0 GPIO_IDR_IDR0_Msk /*!< Port input data, bit 0 */
-#define GPIO_IDR_IDR1_Pos (1U)
-#define GPIO_IDR_IDR1_Msk (0x1U << GPIO_IDR_IDR1_Pos) /*!< 0x00000002 */
-#define GPIO_IDR_IDR1 GPIO_IDR_IDR1_Msk /*!< Port input data, bit 1 */
-#define GPIO_IDR_IDR2_Pos (2U)
-#define GPIO_IDR_IDR2_Msk (0x1U << GPIO_IDR_IDR2_Pos) /*!< 0x00000004 */
-#define GPIO_IDR_IDR2 GPIO_IDR_IDR2_Msk /*!< Port input data, bit 2 */
-#define GPIO_IDR_IDR3_Pos (3U)
-#define GPIO_IDR_IDR3_Msk (0x1U << GPIO_IDR_IDR3_Pos) /*!< 0x00000008 */
-#define GPIO_IDR_IDR3 GPIO_IDR_IDR3_Msk /*!< Port input data, bit 3 */
-#define GPIO_IDR_IDR4_Pos (4U)
-#define GPIO_IDR_IDR4_Msk (0x1U << GPIO_IDR_IDR4_Pos) /*!< 0x00000010 */
-#define GPIO_IDR_IDR4 GPIO_IDR_IDR4_Msk /*!< Port input data, bit 4 */
-#define GPIO_IDR_IDR5_Pos (5U)
-#define GPIO_IDR_IDR5_Msk (0x1U << GPIO_IDR_IDR5_Pos) /*!< 0x00000020 */
-#define GPIO_IDR_IDR5 GPIO_IDR_IDR5_Msk /*!< Port input data, bit 5 */
-#define GPIO_IDR_IDR6_Pos (6U)
-#define GPIO_IDR_IDR6_Msk (0x1U << GPIO_IDR_IDR6_Pos) /*!< 0x00000040 */
-#define GPIO_IDR_IDR6 GPIO_IDR_IDR6_Msk /*!< Port input data, bit 6 */
-#define GPIO_IDR_IDR7_Pos (7U)
-#define GPIO_IDR_IDR7_Msk (0x1U << GPIO_IDR_IDR7_Pos) /*!< 0x00000080 */
-#define GPIO_IDR_IDR7 GPIO_IDR_IDR7_Msk /*!< Port input data, bit 7 */
-#define GPIO_IDR_IDR8_Pos (8U)
-#define GPIO_IDR_IDR8_Msk (0x1U << GPIO_IDR_IDR8_Pos) /*!< 0x00000100 */
-#define GPIO_IDR_IDR8 GPIO_IDR_IDR8_Msk /*!< Port input data, bit 8 */
-#define GPIO_IDR_IDR9_Pos (9U)
-#define GPIO_IDR_IDR9_Msk (0x1U << GPIO_IDR_IDR9_Pos) /*!< 0x00000200 */
-#define GPIO_IDR_IDR9 GPIO_IDR_IDR9_Msk /*!< Port input data, bit 9 */
-#define GPIO_IDR_IDR10_Pos (10U)
-#define GPIO_IDR_IDR10_Msk (0x1U << GPIO_IDR_IDR10_Pos) /*!< 0x00000400 */
-#define GPIO_IDR_IDR10 GPIO_IDR_IDR10_Msk /*!< Port input data, bit 10 */
-#define GPIO_IDR_IDR11_Pos (11U)
-#define GPIO_IDR_IDR11_Msk (0x1U << GPIO_IDR_IDR11_Pos) /*!< 0x00000800 */
-#define GPIO_IDR_IDR11 GPIO_IDR_IDR11_Msk /*!< Port input data, bit 11 */
-#define GPIO_IDR_IDR12_Pos (12U)
-#define GPIO_IDR_IDR12_Msk (0x1U << GPIO_IDR_IDR12_Pos) /*!< 0x00001000 */
-#define GPIO_IDR_IDR12 GPIO_IDR_IDR12_Msk /*!< Port input data, bit 12 */
-#define GPIO_IDR_IDR13_Pos (13U)
-#define GPIO_IDR_IDR13_Msk (0x1U << GPIO_IDR_IDR13_Pos) /*!< 0x00002000 */
-#define GPIO_IDR_IDR13 GPIO_IDR_IDR13_Msk /*!< Port input data, bit 13 */
-#define GPIO_IDR_IDR14_Pos (14U)
-#define GPIO_IDR_IDR14_Msk (0x1U << GPIO_IDR_IDR14_Pos) /*!< 0x00004000 */
-#define GPIO_IDR_IDR14 GPIO_IDR_IDR14_Msk /*!< Port input data, bit 14 */
-#define GPIO_IDR_IDR15_Pos (15U)
-#define GPIO_IDR_IDR15_Msk (0x1U << GPIO_IDR_IDR15_Pos) /*!< 0x00008000 */
-#define GPIO_IDR_IDR15 GPIO_IDR_IDR15_Msk /*!< Port input data, bit 15 */
-
-/******************* Bit definition for GPIO_ODR register *******************/
-#define GPIO_ODR_ODR0_Pos (0U)
-#define GPIO_ODR_ODR0_Msk (0x1U << GPIO_ODR_ODR0_Pos) /*!< 0x00000001 */
-#define GPIO_ODR_ODR0 GPIO_ODR_ODR0_Msk /*!< Port output data, bit 0 */
-#define GPIO_ODR_ODR1_Pos (1U)
-#define GPIO_ODR_ODR1_Msk (0x1U << GPIO_ODR_ODR1_Pos) /*!< 0x00000002 */
-#define GPIO_ODR_ODR1 GPIO_ODR_ODR1_Msk /*!< Port output data, bit 1 */
-#define GPIO_ODR_ODR2_Pos (2U)
-#define GPIO_ODR_ODR2_Msk (0x1U << GPIO_ODR_ODR2_Pos) /*!< 0x00000004 */
-#define GPIO_ODR_ODR2 GPIO_ODR_ODR2_Msk /*!< Port output data, bit 2 */
-#define GPIO_ODR_ODR3_Pos (3U)
-#define GPIO_ODR_ODR3_Msk (0x1U << GPIO_ODR_ODR3_Pos) /*!< 0x00000008 */
-#define GPIO_ODR_ODR3 GPIO_ODR_ODR3_Msk /*!< Port output data, bit 3 */
-#define GPIO_ODR_ODR4_Pos (4U)
-#define GPIO_ODR_ODR4_Msk (0x1U << GPIO_ODR_ODR4_Pos) /*!< 0x00000010 */
-#define GPIO_ODR_ODR4 GPIO_ODR_ODR4_Msk /*!< Port output data, bit 4 */
-#define GPIO_ODR_ODR5_Pos (5U)
-#define GPIO_ODR_ODR5_Msk (0x1U << GPIO_ODR_ODR5_Pos) /*!< 0x00000020 */
-#define GPIO_ODR_ODR5 GPIO_ODR_ODR5_Msk /*!< Port output data, bit 5 */
-#define GPIO_ODR_ODR6_Pos (6U)
-#define GPIO_ODR_ODR6_Msk (0x1U << GPIO_ODR_ODR6_Pos) /*!< 0x00000040 */
-#define GPIO_ODR_ODR6 GPIO_ODR_ODR6_Msk /*!< Port output data, bit 6 */
-#define GPIO_ODR_ODR7_Pos (7U)
-#define GPIO_ODR_ODR7_Msk (0x1U << GPIO_ODR_ODR7_Pos) /*!< 0x00000080 */
-#define GPIO_ODR_ODR7 GPIO_ODR_ODR7_Msk /*!< Port output data, bit 7 */
-#define GPIO_ODR_ODR8_Pos (8U)
-#define GPIO_ODR_ODR8_Msk (0x1U << GPIO_ODR_ODR8_Pos) /*!< 0x00000100 */
-#define GPIO_ODR_ODR8 GPIO_ODR_ODR8_Msk /*!< Port output data, bit 8 */
-#define GPIO_ODR_ODR9_Pos (9U)
-#define GPIO_ODR_ODR9_Msk (0x1U << GPIO_ODR_ODR9_Pos) /*!< 0x00000200 */
-#define GPIO_ODR_ODR9 GPIO_ODR_ODR9_Msk /*!< Port output data, bit 9 */
-#define GPIO_ODR_ODR10_Pos (10U)
-#define GPIO_ODR_ODR10_Msk (0x1U << GPIO_ODR_ODR10_Pos) /*!< 0x00000400 */
-#define GPIO_ODR_ODR10 GPIO_ODR_ODR10_Msk /*!< Port output data, bit 10 */
-#define GPIO_ODR_ODR11_Pos (11U)
-#define GPIO_ODR_ODR11_Msk (0x1U << GPIO_ODR_ODR11_Pos) /*!< 0x00000800 */
-#define GPIO_ODR_ODR11 GPIO_ODR_ODR11_Msk /*!< Port output data, bit 11 */
-#define GPIO_ODR_ODR12_Pos (12U)
-#define GPIO_ODR_ODR12_Msk (0x1U << GPIO_ODR_ODR12_Pos) /*!< 0x00001000 */
-#define GPIO_ODR_ODR12 GPIO_ODR_ODR12_Msk /*!< Port output data, bit 12 */
-#define GPIO_ODR_ODR13_Pos (13U)
-#define GPIO_ODR_ODR13_Msk (0x1U << GPIO_ODR_ODR13_Pos) /*!< 0x00002000 */
-#define GPIO_ODR_ODR13 GPIO_ODR_ODR13_Msk /*!< Port output data, bit 13 */
-#define GPIO_ODR_ODR14_Pos (14U)
-#define GPIO_ODR_ODR14_Msk (0x1U << GPIO_ODR_ODR14_Pos) /*!< 0x00004000 */
-#define GPIO_ODR_ODR14 GPIO_ODR_ODR14_Msk /*!< Port output data, bit 14 */
-#define GPIO_ODR_ODR15_Pos (15U)
-#define GPIO_ODR_ODR15_Msk (0x1U << GPIO_ODR_ODR15_Pos) /*!< 0x00008000 */
-#define GPIO_ODR_ODR15 GPIO_ODR_ODR15_Msk /*!< Port output data, bit 15 */
-
-/****************** Bit definition for GPIO_BSRR register *******************/
-#define GPIO_BSRR_BS0_Pos (0U)
-#define GPIO_BSRR_BS0_Msk (0x1U << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */
-#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk /*!< Port x Set bit 0 */
-#define GPIO_BSRR_BS1_Pos (1U)
-#define GPIO_BSRR_BS1_Msk (0x1U << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */
-#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk /*!< Port x Set bit 1 */
-#define GPIO_BSRR_BS2_Pos (2U)
-#define GPIO_BSRR_BS2_Msk (0x1U << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */
-#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk /*!< Port x Set bit 2 */
-#define GPIO_BSRR_BS3_Pos (3U)
-#define GPIO_BSRR_BS3_Msk (0x1U << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */
-#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk /*!< Port x Set bit 3 */
-#define GPIO_BSRR_BS4_Pos (4U)
-#define GPIO_BSRR_BS4_Msk (0x1U << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */
-#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk /*!< Port x Set bit 4 */
-#define GPIO_BSRR_BS5_Pos (5U)
-#define GPIO_BSRR_BS5_Msk (0x1U << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */
-#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk /*!< Port x Set bit 5 */
-#define GPIO_BSRR_BS6_Pos (6U)
-#define GPIO_BSRR_BS6_Msk (0x1U << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */
-#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk /*!< Port x Set bit 6 */
-#define GPIO_BSRR_BS7_Pos (7U)
-#define GPIO_BSRR_BS7_Msk (0x1U << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */
-#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk /*!< Port x Set bit 7 */
-#define GPIO_BSRR_BS8_Pos (8U)
-#define GPIO_BSRR_BS8_Msk (0x1U << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */
-#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk /*!< Port x Set bit 8 */
-#define GPIO_BSRR_BS9_Pos (9U)
-#define GPIO_BSRR_BS9_Msk (0x1U << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */
-#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk /*!< Port x Set bit 9 */
-#define GPIO_BSRR_BS10_Pos (10U)
-#define GPIO_BSRR_BS10_Msk (0x1U << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */
-#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk /*!< Port x Set bit 10 */
-#define GPIO_BSRR_BS11_Pos (11U)
-#define GPIO_BSRR_BS11_Msk (0x1U << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */
-#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk /*!< Port x Set bit 11 */
-#define GPIO_BSRR_BS12_Pos (12U)
-#define GPIO_BSRR_BS12_Msk (0x1U << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */
-#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk /*!< Port x Set bit 12 */
-#define GPIO_BSRR_BS13_Pos (13U)
-#define GPIO_BSRR_BS13_Msk (0x1U << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */
-#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk /*!< Port x Set bit 13 */
-#define GPIO_BSRR_BS14_Pos (14U)
-#define GPIO_BSRR_BS14_Msk (0x1U << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */
-#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk /*!< Port x Set bit 14 */
-#define GPIO_BSRR_BS15_Pos (15U)
-#define GPIO_BSRR_BS15_Msk (0x1U << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */
-#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk /*!< Port x Set bit 15 */
-
-#define GPIO_BSRR_BR0_Pos (16U)
-#define GPIO_BSRR_BR0_Msk (0x1U << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */
-#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk /*!< Port x Reset bit 0 */
-#define GPIO_BSRR_BR1_Pos (17U)
-#define GPIO_BSRR_BR1_Msk (0x1U << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */
-#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk /*!< Port x Reset bit 1 */
-#define GPIO_BSRR_BR2_Pos (18U)
-#define GPIO_BSRR_BR2_Msk (0x1U << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */
-#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk /*!< Port x Reset bit 2 */
-#define GPIO_BSRR_BR3_Pos (19U)
-#define GPIO_BSRR_BR3_Msk (0x1U << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */
-#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk /*!< Port x Reset bit 3 */
-#define GPIO_BSRR_BR4_Pos (20U)
-#define GPIO_BSRR_BR4_Msk (0x1U << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */
-#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk /*!< Port x Reset bit 4 */
-#define GPIO_BSRR_BR5_Pos (21U)
-#define GPIO_BSRR_BR5_Msk (0x1U << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */
-#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk /*!< Port x Reset bit 5 */
-#define GPIO_BSRR_BR6_Pos (22U)
-#define GPIO_BSRR_BR6_Msk (0x1U << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */
-#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk /*!< Port x Reset bit 6 */
-#define GPIO_BSRR_BR7_Pos (23U)
-#define GPIO_BSRR_BR7_Msk (0x1U << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */
-#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk /*!< Port x Reset bit 7 */
-#define GPIO_BSRR_BR8_Pos (24U)
-#define GPIO_BSRR_BR8_Msk (0x1U << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */
-#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk /*!< Port x Reset bit 8 */
-#define GPIO_BSRR_BR9_Pos (25U)
-#define GPIO_BSRR_BR9_Msk (0x1U << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */
-#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk /*!< Port x Reset bit 9 */
-#define GPIO_BSRR_BR10_Pos (26U)
-#define GPIO_BSRR_BR10_Msk (0x1U << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */
-#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk /*!< Port x Reset bit 10 */
-#define GPIO_BSRR_BR11_Pos (27U)
-#define GPIO_BSRR_BR11_Msk (0x1U << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */
-#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk /*!< Port x Reset bit 11 */
-#define GPIO_BSRR_BR12_Pos (28U)
-#define GPIO_BSRR_BR12_Msk (0x1U << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */
-#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk /*!< Port x Reset bit 12 */
-#define GPIO_BSRR_BR13_Pos (29U)
-#define GPIO_BSRR_BR13_Msk (0x1U << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */
-#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk /*!< Port x Reset bit 13 */
-#define GPIO_BSRR_BR14_Pos (30U)
-#define GPIO_BSRR_BR14_Msk (0x1U << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */
-#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk /*!< Port x Reset bit 14 */
-#define GPIO_BSRR_BR15_Pos (31U)
-#define GPIO_BSRR_BR15_Msk (0x1U << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */
-#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk /*!< Port x Reset bit 15 */
-
-/******************* Bit definition for GPIO_BRR register *******************/
-#define GPIO_BRR_BR0_Pos (0U)
-#define GPIO_BRR_BR0_Msk (0x1U << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */
-#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk /*!< Port x Reset bit 0 */
-#define GPIO_BRR_BR1_Pos (1U)
-#define GPIO_BRR_BR1_Msk (0x1U << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */
-#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk /*!< Port x Reset bit 1 */
-#define GPIO_BRR_BR2_Pos (2U)
-#define GPIO_BRR_BR2_Msk (0x1U << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */
-#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk /*!< Port x Reset bit 2 */
-#define GPIO_BRR_BR3_Pos (3U)
-#define GPIO_BRR_BR3_Msk (0x1U << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */
-#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk /*!< Port x Reset bit 3 */
-#define GPIO_BRR_BR4_Pos (4U)
-#define GPIO_BRR_BR4_Msk (0x1U << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */
-#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk /*!< Port x Reset bit 4 */
-#define GPIO_BRR_BR5_Pos (5U)
-#define GPIO_BRR_BR5_Msk (0x1U << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */
-#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk /*!< Port x Reset bit 5 */
-#define GPIO_BRR_BR6_Pos (6U)
-#define GPIO_BRR_BR6_Msk (0x1U << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */
-#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk /*!< Port x Reset bit 6 */
-#define GPIO_BRR_BR7_Pos (7U)
-#define GPIO_BRR_BR7_Msk (0x1U << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */
-#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk /*!< Port x Reset bit 7 */
-#define GPIO_BRR_BR8_Pos (8U)
-#define GPIO_BRR_BR8_Msk (0x1U << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */
-#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk /*!< Port x Reset bit 8 */
-#define GPIO_BRR_BR9_Pos (9U)
-#define GPIO_BRR_BR9_Msk (0x1U << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */
-#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk /*!< Port x Reset bit 9 */
-#define GPIO_BRR_BR10_Pos (10U)
-#define GPIO_BRR_BR10_Msk (0x1U << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */
-#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk /*!< Port x Reset bit 10 */
-#define GPIO_BRR_BR11_Pos (11U)
-#define GPIO_BRR_BR11_Msk (0x1U << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */
-#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk /*!< Port x Reset bit 11 */
-#define GPIO_BRR_BR12_Pos (12U)
-#define GPIO_BRR_BR12_Msk (0x1U << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */
-#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk /*!< Port x Reset bit 12 */
-#define GPIO_BRR_BR13_Pos (13U)
-#define GPIO_BRR_BR13_Msk (0x1U << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */
-#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk /*!< Port x Reset bit 13 */
-#define GPIO_BRR_BR14_Pos (14U)
-#define GPIO_BRR_BR14_Msk (0x1U << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */
-#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk /*!< Port x Reset bit 14 */
-#define GPIO_BRR_BR15_Pos (15U)
-#define GPIO_BRR_BR15_Msk (0x1U << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */
-#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk /*!< Port x Reset bit 15 */
-
-/****************** Bit definition for GPIO_LCKR register *******************/
-#define GPIO_LCKR_LCK0_Pos (0U)
-#define GPIO_LCKR_LCK0_Msk (0x1U << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */
-#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk /*!< Port x Lock bit 0 */
-#define GPIO_LCKR_LCK1_Pos (1U)
-#define GPIO_LCKR_LCK1_Msk (0x1U << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */
-#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk /*!< Port x Lock bit 1 */
-#define GPIO_LCKR_LCK2_Pos (2U)
-#define GPIO_LCKR_LCK2_Msk (0x1U << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */
-#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk /*!< Port x Lock bit 2 */
-#define GPIO_LCKR_LCK3_Pos (3U)
-#define GPIO_LCKR_LCK3_Msk (0x1U << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */
-#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk /*!< Port x Lock bit 3 */
-#define GPIO_LCKR_LCK4_Pos (4U)
-#define GPIO_LCKR_LCK4_Msk (0x1U << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */
-#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk /*!< Port x Lock bit 4 */
-#define GPIO_LCKR_LCK5_Pos (5U)
-#define GPIO_LCKR_LCK5_Msk (0x1U << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */
-#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk /*!< Port x Lock bit 5 */
-#define GPIO_LCKR_LCK6_Pos (6U)
-#define GPIO_LCKR_LCK6_Msk (0x1U << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */
-#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk /*!< Port x Lock bit 6 */
-#define GPIO_LCKR_LCK7_Pos (7U)
-#define GPIO_LCKR_LCK7_Msk (0x1U << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */
-#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk /*!< Port x Lock bit 7 */
-#define GPIO_LCKR_LCK8_Pos (8U)
-#define GPIO_LCKR_LCK8_Msk (0x1U << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */
-#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk /*!< Port x Lock bit 8 */
-#define GPIO_LCKR_LCK9_Pos (9U)
-#define GPIO_LCKR_LCK9_Msk (0x1U << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */
-#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk /*!< Port x Lock bit 9 */
-#define GPIO_LCKR_LCK10_Pos (10U)
-#define GPIO_LCKR_LCK10_Msk (0x1U << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */
-#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk /*!< Port x Lock bit 10 */
-#define GPIO_LCKR_LCK11_Pos (11U)
-#define GPIO_LCKR_LCK11_Msk (0x1U << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */
-#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk /*!< Port x Lock bit 11 */
-#define GPIO_LCKR_LCK12_Pos (12U)
-#define GPIO_LCKR_LCK12_Msk (0x1U << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */
-#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk /*!< Port x Lock bit 12 */
-#define GPIO_LCKR_LCK13_Pos (13U)
-#define GPIO_LCKR_LCK13_Msk (0x1U << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */
-#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk /*!< Port x Lock bit 13 */
-#define GPIO_LCKR_LCK14_Pos (14U)
-#define GPIO_LCKR_LCK14_Msk (0x1U << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */
-#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk /*!< Port x Lock bit 14 */
-#define GPIO_LCKR_LCK15_Pos (15U)
-#define GPIO_LCKR_LCK15_Msk (0x1U << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */
-#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk /*!< Port x Lock bit 15 */
-#define GPIO_LCKR_LCKK_Pos (16U)
-#define GPIO_LCKR_LCKK_Msk (0x1U << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */
-#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk /*!< Lock key */
-
-/*----------------------------------------------------------------------------*/
-
-/****************** Bit definition for AFIO_EVCR register *******************/
-#define AFIO_EVCR_PIN_Pos (0U)
-#define AFIO_EVCR_PIN_Msk (0xFU << AFIO_EVCR_PIN_Pos) /*!< 0x0000000F */
-#define AFIO_EVCR_PIN AFIO_EVCR_PIN_Msk /*!< PIN[3:0] bits (Pin selection) */
-#define AFIO_EVCR_PIN_0 (0x1U << AFIO_EVCR_PIN_Pos) /*!< 0x00000001 */
-#define AFIO_EVCR_PIN_1 (0x2U << AFIO_EVCR_PIN_Pos) /*!< 0x00000002 */
-#define AFIO_EVCR_PIN_2 (0x4U << AFIO_EVCR_PIN_Pos) /*!< 0x00000004 */
-#define AFIO_EVCR_PIN_3 (0x8U << AFIO_EVCR_PIN_Pos) /*!< 0x00000008 */
-
-/*!< PIN configuration */
-#define AFIO_EVCR_PIN_PX0 ((uint32_t)0x00000000) /*!< Pin 0 selected */
-#define AFIO_EVCR_PIN_PX1_Pos (0U)
-#define AFIO_EVCR_PIN_PX1_Msk (0x1U << AFIO_EVCR_PIN_PX1_Pos) /*!< 0x00000001 */
-#define AFIO_EVCR_PIN_PX1 AFIO_EVCR_PIN_PX1_Msk /*!< Pin 1 selected */
-#define AFIO_EVCR_PIN_PX2_Pos (1U)
-#define AFIO_EVCR_PIN_PX2_Msk (0x1U << AFIO_EVCR_PIN_PX2_Pos) /*!< 0x00000002 */
-#define AFIO_EVCR_PIN_PX2 AFIO_EVCR_PIN_PX2_Msk /*!< Pin 2 selected */
-#define AFIO_EVCR_PIN_PX3_Pos (0U)
-#define AFIO_EVCR_PIN_PX3_Msk (0x3U << AFIO_EVCR_PIN_PX3_Pos) /*!< 0x00000003 */
-#define AFIO_EVCR_PIN_PX3 AFIO_EVCR_PIN_PX3_Msk /*!< Pin 3 selected */
-#define AFIO_EVCR_PIN_PX4_Pos (2U)
-#define AFIO_EVCR_PIN_PX4_Msk (0x1U << AFIO_EVCR_PIN_PX4_Pos) /*!< 0x00000004 */
-#define AFIO_EVCR_PIN_PX4 AFIO_EVCR_PIN_PX4_Msk /*!< Pin 4 selected */
-#define AFIO_EVCR_PIN_PX5_Pos (0U)
-#define AFIO_EVCR_PIN_PX5_Msk (0x5U << AFIO_EVCR_PIN_PX5_Pos) /*!< 0x00000005 */
-#define AFIO_EVCR_PIN_PX5 AFIO_EVCR_PIN_PX5_Msk /*!< Pin 5 selected */
-#define AFIO_EVCR_PIN_PX6_Pos (1U)
-#define AFIO_EVCR_PIN_PX6_Msk (0x3U << AFIO_EVCR_PIN_PX6_Pos) /*!< 0x00000006 */
-#define AFIO_EVCR_PIN_PX6 AFIO_EVCR_PIN_PX6_Msk /*!< Pin 6 selected */
-#define AFIO_EVCR_PIN_PX7_Pos (0U)
-#define AFIO_EVCR_PIN_PX7_Msk (0x7U << AFIO_EVCR_PIN_PX7_Pos) /*!< 0x00000007 */
-#define AFIO_EVCR_PIN_PX7 AFIO_EVCR_PIN_PX7_Msk /*!< Pin 7 selected */
-#define AFIO_EVCR_PIN_PX8_Pos (3U)
-#define AFIO_EVCR_PIN_PX8_Msk (0x1U << AFIO_EVCR_PIN_PX8_Pos) /*!< 0x00000008 */
-#define AFIO_EVCR_PIN_PX8 AFIO_EVCR_PIN_PX8_Msk /*!< Pin 8 selected */
-#define AFIO_EVCR_PIN_PX9_Pos (0U)
-#define AFIO_EVCR_PIN_PX9_Msk (0x9U << AFIO_EVCR_PIN_PX9_Pos) /*!< 0x00000009 */
-#define AFIO_EVCR_PIN_PX9 AFIO_EVCR_PIN_PX9_Msk /*!< Pin 9 selected */
-#define AFIO_EVCR_PIN_PX10_Pos (1U)
-#define AFIO_EVCR_PIN_PX10_Msk (0x5U << AFIO_EVCR_PIN_PX10_Pos) /*!< 0x0000000A */
-#define AFIO_EVCR_PIN_PX10 AFIO_EVCR_PIN_PX10_Msk /*!< Pin 10 selected */
-#define AFIO_EVCR_PIN_PX11_Pos (0U)
-#define AFIO_EVCR_PIN_PX11_Msk (0xBU << AFIO_EVCR_PIN_PX11_Pos) /*!< 0x0000000B */
-#define AFIO_EVCR_PIN_PX11 AFIO_EVCR_PIN_PX11_Msk /*!< Pin 11 selected */
-#define AFIO_EVCR_PIN_PX12_Pos (2U)
-#define AFIO_EVCR_PIN_PX12_Msk (0x3U << AFIO_EVCR_PIN_PX12_Pos) /*!< 0x0000000C */
-#define AFIO_EVCR_PIN_PX12 AFIO_EVCR_PIN_PX12_Msk /*!< Pin 12 selected */
-#define AFIO_EVCR_PIN_PX13_Pos (0U)
-#define AFIO_EVCR_PIN_PX13_Msk (0xDU << AFIO_EVCR_PIN_PX13_Pos) /*!< 0x0000000D */
-#define AFIO_EVCR_PIN_PX13 AFIO_EVCR_PIN_PX13_Msk /*!< Pin 13 selected */
-#define AFIO_EVCR_PIN_PX14_Pos (1U)
-#define AFIO_EVCR_PIN_PX14_Msk (0x7U << AFIO_EVCR_PIN_PX14_Pos) /*!< 0x0000000E */
-#define AFIO_EVCR_PIN_PX14 AFIO_EVCR_PIN_PX14_Msk /*!< Pin 14 selected */
-#define AFIO_EVCR_PIN_PX15_Pos (0U)
-#define AFIO_EVCR_PIN_PX15_Msk (0xFU << AFIO_EVCR_PIN_PX15_Pos) /*!< 0x0000000F */
-#define AFIO_EVCR_PIN_PX15 AFIO_EVCR_PIN_PX15_Msk /*!< Pin 15 selected */
-
-#define AFIO_EVCR_PORT_Pos (4U)
-#define AFIO_EVCR_PORT_Msk (0x7U << AFIO_EVCR_PORT_Pos) /*!< 0x00000070 */
-#define AFIO_EVCR_PORT AFIO_EVCR_PORT_Msk /*!< PORT[2:0] bits (Port selection) */
-#define AFIO_EVCR_PORT_0 (0x1U << AFIO_EVCR_PORT_Pos) /*!< 0x00000010 */
-#define AFIO_EVCR_PORT_1 (0x2U << AFIO_EVCR_PORT_Pos) /*!< 0x00000020 */
-#define AFIO_EVCR_PORT_2 (0x4U << AFIO_EVCR_PORT_Pos) /*!< 0x00000040 */
-
-/*!< PORT configuration */
-#define AFIO_EVCR_PORT_PA ((uint32_t)0x00000000) /*!< Port A selected */
-#define AFIO_EVCR_PORT_PB_Pos (4U)
-#define AFIO_EVCR_PORT_PB_Msk (0x1U << AFIO_EVCR_PORT_PB_Pos) /*!< 0x00000010 */
-#define AFIO_EVCR_PORT_PB AFIO_EVCR_PORT_PB_Msk /*!< Port B selected */
-#define AFIO_EVCR_PORT_PC_Pos (5U)
-#define AFIO_EVCR_PORT_PC_Msk (0x1U << AFIO_EVCR_PORT_PC_Pos) /*!< 0x00000020 */
-#define AFIO_EVCR_PORT_PC AFIO_EVCR_PORT_PC_Msk /*!< Port C selected */
-#define AFIO_EVCR_PORT_PD_Pos (4U)
-#define AFIO_EVCR_PORT_PD_Msk (0x3U << AFIO_EVCR_PORT_PD_Pos) /*!< 0x00000030 */
-#define AFIO_EVCR_PORT_PD AFIO_EVCR_PORT_PD_Msk /*!< Port D selected */
-#define AFIO_EVCR_PORT_PE_Pos (6U)
-#define AFIO_EVCR_PORT_PE_Msk (0x1U << AFIO_EVCR_PORT_PE_Pos) /*!< 0x00000040 */
-#define AFIO_EVCR_PORT_PE AFIO_EVCR_PORT_PE_Msk /*!< Port E selected */
-
-#define AFIO_EVCR_EVOE_Pos (7U)
-#define AFIO_EVCR_EVOE_Msk (0x1U << AFIO_EVCR_EVOE_Pos) /*!< 0x00000080 */
-#define AFIO_EVCR_EVOE AFIO_EVCR_EVOE_Msk /*!< Event Output Enable */
-
-/****************** Bit definition for AFIO_MAPR register *******************/
-#define AFIO_MAPR_SPI1_REMAP_Pos (0U)
-#define AFIO_MAPR_SPI1_REMAP_Msk (0x1U << AFIO_MAPR_SPI1_REMAP_Pos) /*!< 0x00000001 */
-#define AFIO_MAPR_SPI1_REMAP AFIO_MAPR_SPI1_REMAP_Msk /*!< SPI1 remapping */
-#define AFIO_MAPR_I2C1_REMAP_Pos (1U)
-#define AFIO_MAPR_I2C1_REMAP_Msk (0x1U << AFIO_MAPR_I2C1_REMAP_Pos) /*!< 0x00000002 */
-#define AFIO_MAPR_I2C1_REMAP AFIO_MAPR_I2C1_REMAP_Msk /*!< I2C1 remapping */
-#define AFIO_MAPR_USART1_REMAP_Pos (2U)
-#define AFIO_MAPR_USART1_REMAP_Msk (0x1U << AFIO_MAPR_USART1_REMAP_Pos) /*!< 0x00000004 */
-#define AFIO_MAPR_USART1_REMAP AFIO_MAPR_USART1_REMAP_Msk /*!< USART1 remapping */
-#define AFIO_MAPR_USART2_REMAP_Pos (3U)
-#define AFIO_MAPR_USART2_REMAP_Msk (0x1U << AFIO_MAPR_USART2_REMAP_Pos) /*!< 0x00000008 */
-#define AFIO_MAPR_USART2_REMAP AFIO_MAPR_USART2_REMAP_Msk /*!< USART2 remapping */
-
-
-#define AFIO_MAPR_TIM1_REMAP_Pos (6U)
-#define AFIO_MAPR_TIM1_REMAP_Msk (0x3U << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x000000C0 */
-#define AFIO_MAPR_TIM1_REMAP AFIO_MAPR_TIM1_REMAP_Msk /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */
-#define AFIO_MAPR_TIM1_REMAP_0 (0x1U << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000040 */
-#define AFIO_MAPR_TIM1_REMAP_1 (0x2U << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000080 */
-
-/*!< TIM1_REMAP configuration */
-#define AFIO_MAPR_TIM1_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */
-#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos (6U)
-#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk (0x1U << AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos) /*!< 0x00000040 */
-#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */
-#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos (6U)
-#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk (0x3U << AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos) /*!< 0x000000C0 */
-#define AFIO_MAPR_TIM1_REMAP_FULLREMAP AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */
-
-#define AFIO_MAPR_TIM2_REMAP_Pos (8U)
-#define AFIO_MAPR_TIM2_REMAP_Msk (0x3U << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000300 */
-#define AFIO_MAPR_TIM2_REMAP AFIO_MAPR_TIM2_REMAP_Msk /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */
-#define AFIO_MAPR_TIM2_REMAP_0 (0x1U << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000100 */
-#define AFIO_MAPR_TIM2_REMAP_1 (0x2U << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000200 */
-
-/*!< TIM2_REMAP configuration */
-#define AFIO_MAPR_TIM2_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */
-#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos (8U)
-#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk (0x1U << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos) /*!< 0x00000100 */
-#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */
-#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos (9U)
-#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk (0x1U << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos) /*!< 0x00000200 */
-#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */
-#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos (8U)
-#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk (0x3U << AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos) /*!< 0x00000300 */
-#define AFIO_MAPR_TIM2_REMAP_FULLREMAP AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */
-
-#define AFIO_MAPR_TIM3_REMAP_Pos (10U)
-#define AFIO_MAPR_TIM3_REMAP_Msk (0x3U << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000C00 */
-#define AFIO_MAPR_TIM3_REMAP AFIO_MAPR_TIM3_REMAP_Msk /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */
-#define AFIO_MAPR_TIM3_REMAP_0 (0x1U << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000400 */
-#define AFIO_MAPR_TIM3_REMAP_1 (0x2U << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000800 */
-
-/*!< TIM3_REMAP configuration */
-#define AFIO_MAPR_TIM3_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */
-#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos (11U)
-#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk (0x1U << AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000800 */
-#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */
-#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos (10U)
-#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk (0x3U << AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos) /*!< 0x00000C00 */
-#define AFIO_MAPR_TIM3_REMAP_FULLREMAP AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */
-
-
-#define AFIO_MAPR_CAN_REMAP_Pos (13U)
-#define AFIO_MAPR_CAN_REMAP_Msk (0x3U << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00006000 */
-#define AFIO_MAPR_CAN_REMAP AFIO_MAPR_CAN_REMAP_Msk /*!< CAN_REMAP[1:0] bits (CAN Alternate function remapping) */
-#define AFIO_MAPR_CAN_REMAP_0 (0x1U << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00002000 */
-#define AFIO_MAPR_CAN_REMAP_1 (0x2U << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00004000 */
-
-/*!< CAN_REMAP configuration */
-#define AFIO_MAPR_CAN_REMAP_REMAP1 ((uint32_t)0x00000000) /*!< CANRX mapped to PA11, CANTX mapped to PA12 */
-#define AFIO_MAPR_CAN_REMAP_REMAP2_Pos (14U)
-#define AFIO_MAPR_CAN_REMAP_REMAP2_Msk (0x1U << AFIO_MAPR_CAN_REMAP_REMAP2_Pos) /*!< 0x00004000 */
-#define AFIO_MAPR_CAN_REMAP_REMAP2 AFIO_MAPR_CAN_REMAP_REMAP2_Msk /*!< CANRX mapped to PB8, CANTX mapped to PB9 */
-#define AFIO_MAPR_CAN_REMAP_REMAP3_Pos (13U)
-#define AFIO_MAPR_CAN_REMAP_REMAP3_Msk (0x3U << AFIO_MAPR_CAN_REMAP_REMAP3_Pos) /*!< 0x00006000 */
-#define AFIO_MAPR_CAN_REMAP_REMAP3 AFIO_MAPR_CAN_REMAP_REMAP3_Msk /*!< CANRX mapped to PD0, CANTX mapped to PD1 */
-
-#define AFIO_MAPR_PD01_REMAP_Pos (15U)
-#define AFIO_MAPR_PD01_REMAP_Msk (0x1U << AFIO_MAPR_PD01_REMAP_Pos) /*!< 0x00008000 */
-#define AFIO_MAPR_PD01_REMAP AFIO_MAPR_PD01_REMAP_Msk /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */
-
-/*!< SWJ_CFG configuration */
-#define AFIO_MAPR_SWJ_CFG_Pos (24U)
-#define AFIO_MAPR_SWJ_CFG_Msk (0x7U << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x07000000 */
-#define AFIO_MAPR_SWJ_CFG AFIO_MAPR_SWJ_CFG_Msk /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */
-#define AFIO_MAPR_SWJ_CFG_0 (0x1U << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x01000000 */
-#define AFIO_MAPR_SWJ_CFG_1 (0x2U << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x02000000 */
-#define AFIO_MAPR_SWJ_CFG_2 (0x4U << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x04000000 */
-
-#define AFIO_MAPR_SWJ_CFG_RESET ((uint32_t)0x00000000) /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */
-#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos (24U)
-#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk (0x1U << AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos) /*!< 0x01000000 */
-#define AFIO_MAPR_SWJ_CFG_NOJNTRST AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */
-#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos (25U)
-#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk (0x1U << AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos) /*!< 0x02000000 */
-#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Enabled */
-#define AFIO_MAPR_SWJ_CFG_DISABLE_Pos (26U)
-#define AFIO_MAPR_SWJ_CFG_DISABLE_Msk (0x1U << AFIO_MAPR_SWJ_CFG_DISABLE_Pos) /*!< 0x04000000 */
-#define AFIO_MAPR_SWJ_CFG_DISABLE AFIO_MAPR_SWJ_CFG_DISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Disabled */
-
-
-/***************** Bit definition for AFIO_EXTICR1 register *****************/
-#define AFIO_EXTICR1_EXTI0_Pos (0U)
-#define AFIO_EXTICR1_EXTI0_Msk (0xFU << AFIO_EXTICR1_EXTI0_Pos) /*!< 0x0000000F */
-#define AFIO_EXTICR1_EXTI0 AFIO_EXTICR1_EXTI0_Msk /*!< EXTI 0 configuration */
-#define AFIO_EXTICR1_EXTI1_Pos (4U)
-#define AFIO_EXTICR1_EXTI1_Msk (0xFU << AFIO_EXTICR1_EXTI1_Pos) /*!< 0x000000F0 */
-#define AFIO_EXTICR1_EXTI1 AFIO_EXTICR1_EXTI1_Msk /*!< EXTI 1 configuration */
-#define AFIO_EXTICR1_EXTI2_Pos (8U)
-#define AFIO_EXTICR1_EXTI2_Msk (0xFU << AFIO_EXTICR1_EXTI2_Pos) /*!< 0x00000F00 */
-#define AFIO_EXTICR1_EXTI2 AFIO_EXTICR1_EXTI2_Msk /*!< EXTI 2 configuration */
-#define AFIO_EXTICR1_EXTI3_Pos (12U)
-#define AFIO_EXTICR1_EXTI3_Msk (0xFU << AFIO_EXTICR1_EXTI3_Pos) /*!< 0x0000F000 */
-#define AFIO_EXTICR1_EXTI3 AFIO_EXTICR1_EXTI3_Msk /*!< EXTI 3 configuration */
-
-/*!< EXTI0 configuration */
-#define AFIO_EXTICR1_EXTI0_PA ((uint32_t)0x00000000) /*!< PA[0] pin */
-#define AFIO_EXTICR1_EXTI0_PB_Pos (0U)
-#define AFIO_EXTICR1_EXTI0_PB_Msk (0x1U << AFIO_EXTICR1_EXTI0_PB_Pos) /*!< 0x00000001 */
-#define AFIO_EXTICR1_EXTI0_PB AFIO_EXTICR1_EXTI0_PB_Msk /*!< PB[0] pin */
-#define AFIO_EXTICR1_EXTI0_PC_Pos (1U)
-#define AFIO_EXTICR1_EXTI0_PC_Msk (0x1U << AFIO_EXTICR1_EXTI0_PC_Pos) /*!< 0x00000002 */
-#define AFIO_EXTICR1_EXTI0_PC AFIO_EXTICR1_EXTI0_PC_Msk /*!< PC[0] pin */
-#define AFIO_EXTICR1_EXTI0_PD_Pos (0U)
-#define AFIO_EXTICR1_EXTI0_PD_Msk (0x3U << AFIO_EXTICR1_EXTI0_PD_Pos) /*!< 0x00000003 */
-#define AFIO_EXTICR1_EXTI0_PD AFIO_EXTICR1_EXTI0_PD_Msk /*!< PD[0] pin */
-#define AFIO_EXTICR1_EXTI0_PE_Pos (2U)
-#define AFIO_EXTICR1_EXTI0_PE_Msk (0x1U << AFIO_EXTICR1_EXTI0_PE_Pos) /*!< 0x00000004 */
-#define AFIO_EXTICR1_EXTI0_PE AFIO_EXTICR1_EXTI0_PE_Msk /*!< PE[0] pin */
-#define AFIO_EXTICR1_EXTI0_PF_Pos (0U)
-#define AFIO_EXTICR1_EXTI0_PF_Msk (0x5U << AFIO_EXTICR1_EXTI0_PF_Pos) /*!< 0x00000005 */
-#define AFIO_EXTICR1_EXTI0_PF AFIO_EXTICR1_EXTI0_PF_Msk /*!< PF[0] pin */
-#define AFIO_EXTICR1_EXTI0_PG_Pos (1U)
-#define AFIO_EXTICR1_EXTI0_PG_Msk (0x3U << AFIO_EXTICR1_EXTI0_PG_Pos) /*!< 0x00000006 */
-#define AFIO_EXTICR1_EXTI0_PG AFIO_EXTICR1_EXTI0_PG_Msk /*!< PG[0] pin */
-
-/*!< EXTI1 configuration */
-#define AFIO_EXTICR1_EXTI1_PA ((uint32_t)0x00000000) /*!< PA[1] pin */
-#define AFIO_EXTICR1_EXTI1_PB_Pos (4U)
-#define AFIO_EXTICR1_EXTI1_PB_Msk (0x1U << AFIO_EXTICR1_EXTI1_PB_Pos) /*!< 0x00000010 */
-#define AFIO_EXTICR1_EXTI1_PB AFIO_EXTICR1_EXTI1_PB_Msk /*!< PB[1] pin */
-#define AFIO_EXTICR1_EXTI1_PC_Pos (5U)
-#define AFIO_EXTICR1_EXTI1_PC_Msk (0x1U << AFIO_EXTICR1_EXTI1_PC_Pos) /*!< 0x00000020 */
-#define AFIO_EXTICR1_EXTI1_PC AFIO_EXTICR1_EXTI1_PC_Msk /*!< PC[1] pin */
-#define AFIO_EXTICR1_EXTI1_PD_Pos (4U)
-#define AFIO_EXTICR1_EXTI1_PD_Msk (0x3U << AFIO_EXTICR1_EXTI1_PD_Pos) /*!< 0x00000030 */
-#define AFIO_EXTICR1_EXTI1_PD AFIO_EXTICR1_EXTI1_PD_Msk /*!< PD[1] pin */
-#define AFIO_EXTICR1_EXTI1_PE_Pos (6U)
-#define AFIO_EXTICR1_EXTI1_PE_Msk (0x1U << AFIO_EXTICR1_EXTI1_PE_Pos) /*!< 0x00000040 */
-#define AFIO_EXTICR1_EXTI1_PE AFIO_EXTICR1_EXTI1_PE_Msk /*!< PE[1] pin */
-#define AFIO_EXTICR1_EXTI1_PF_Pos (4U)
-#define AFIO_EXTICR1_EXTI1_PF_Msk (0x5U << AFIO_EXTICR1_EXTI1_PF_Pos) /*!< 0x00000050 */
-#define AFIO_EXTICR1_EXTI1_PF AFIO_EXTICR1_EXTI1_PF_Msk /*!< PF[1] pin */
-#define AFIO_EXTICR1_EXTI1_PG_Pos (5U)
-#define AFIO_EXTICR1_EXTI1_PG_Msk (0x3U << AFIO_EXTICR1_EXTI1_PG_Pos) /*!< 0x00000060 */
-#define AFIO_EXTICR1_EXTI1_PG AFIO_EXTICR1_EXTI1_PG_Msk /*!< PG[1] pin */
-
-/*!< EXTI2 configuration */
-#define AFIO_EXTICR1_EXTI2_PA ((uint32_t)0x00000000) /*!< PA[2] pin */
-#define AFIO_EXTICR1_EXTI2_PB_Pos (8U)
-#define AFIO_EXTICR1_EXTI2_PB_Msk (0x1U << AFIO_EXTICR1_EXTI2_PB_Pos) /*!< 0x00000100 */
-#define AFIO_EXTICR1_EXTI2_PB AFIO_EXTICR1_EXTI2_PB_Msk /*!< PB[2] pin */
-#define AFIO_EXTICR1_EXTI2_PC_Pos (9U)
-#define AFIO_EXTICR1_EXTI2_PC_Msk (0x1U << AFIO_EXTICR1_EXTI2_PC_Pos) /*!< 0x00000200 */
-#define AFIO_EXTICR1_EXTI2_PC AFIO_EXTICR1_EXTI2_PC_Msk /*!< PC[2] pin */
-#define AFIO_EXTICR1_EXTI2_PD_Pos (8U)
-#define AFIO_EXTICR1_EXTI2_PD_Msk (0x3U << AFIO_EXTICR1_EXTI2_PD_Pos) /*!< 0x00000300 */
-#define AFIO_EXTICR1_EXTI2_PD AFIO_EXTICR1_EXTI2_PD_Msk /*!< PD[2] pin */
-#define AFIO_EXTICR1_EXTI2_PE_Pos (10U)
-#define AFIO_EXTICR1_EXTI2_PE_Msk (0x1U << AFIO_EXTICR1_EXTI2_PE_Pos) /*!< 0x00000400 */
-#define AFIO_EXTICR1_EXTI2_PE AFIO_EXTICR1_EXTI2_PE_Msk /*!< PE[2] pin */
-#define AFIO_EXTICR1_EXTI2_PF_Pos (8U)
-#define AFIO_EXTICR1_EXTI2_PF_Msk (0x5U << AFIO_EXTICR1_EXTI2_PF_Pos) /*!< 0x00000500 */
-#define AFIO_EXTICR1_EXTI2_PF AFIO_EXTICR1_EXTI2_PF_Msk /*!< PF[2] pin */
-#define AFIO_EXTICR1_EXTI2_PG_Pos (9U)
-#define AFIO_EXTICR1_EXTI2_PG_Msk (0x3U << AFIO_EXTICR1_EXTI2_PG_Pos) /*!< 0x00000600 */
-#define AFIO_EXTICR1_EXTI2_PG AFIO_EXTICR1_EXTI2_PG_Msk /*!< PG[2] pin */
-
-/*!< EXTI3 configuration */
-#define AFIO_EXTICR1_EXTI3_PA ((uint32_t)0x00000000) /*!< PA[3] pin */
-#define AFIO_EXTICR1_EXTI3_PB_Pos (12U)
-#define AFIO_EXTICR1_EXTI3_PB_Msk (0x1U << AFIO_EXTICR1_EXTI3_PB_Pos) /*!< 0x00001000 */
-#define AFIO_EXTICR1_EXTI3_PB AFIO_EXTICR1_EXTI3_PB_Msk /*!< PB[3] pin */
-#define AFIO_EXTICR1_EXTI3_PC_Pos (13U)
-#define AFIO_EXTICR1_EXTI3_PC_Msk (0x1U << AFIO_EXTICR1_EXTI3_PC_Pos) /*!< 0x00002000 */
-#define AFIO_EXTICR1_EXTI3_PC AFIO_EXTICR1_EXTI3_PC_Msk /*!< PC[3] pin */
-#define AFIO_EXTICR1_EXTI3_PD_Pos (12U)
-#define AFIO_EXTICR1_EXTI3_PD_Msk (0x3U << AFIO_EXTICR1_EXTI3_PD_Pos) /*!< 0x00003000 */
-#define AFIO_EXTICR1_EXTI3_PD AFIO_EXTICR1_EXTI3_PD_Msk /*!< PD[3] pin */
-#define AFIO_EXTICR1_EXTI3_PE_Pos (14U)
-#define AFIO_EXTICR1_EXTI3_PE_Msk (0x1U << AFIO_EXTICR1_EXTI3_PE_Pos) /*!< 0x00004000 */
-#define AFIO_EXTICR1_EXTI3_PE AFIO_EXTICR1_EXTI3_PE_Msk /*!< PE[3] pin */
-#define AFIO_EXTICR1_EXTI3_PF_Pos (12U)
-#define AFIO_EXTICR1_EXTI3_PF_Msk (0x5U << AFIO_EXTICR1_EXTI3_PF_Pos) /*!< 0x00005000 */
-#define AFIO_EXTICR1_EXTI3_PF AFIO_EXTICR1_EXTI3_PF_Msk /*!< PF[3] pin */
-#define AFIO_EXTICR1_EXTI3_PG_Pos (13U)
-#define AFIO_EXTICR1_EXTI3_PG_Msk (0x3U << AFIO_EXTICR1_EXTI3_PG_Pos) /*!< 0x00006000 */
-#define AFIO_EXTICR1_EXTI3_PG AFIO_EXTICR1_EXTI3_PG_Msk /*!< PG[3] pin */
-
-/***************** Bit definition for AFIO_EXTICR2 register *****************/
-#define AFIO_EXTICR2_EXTI4_Pos (0U)
-#define AFIO_EXTICR2_EXTI4_Msk (0xFU << AFIO_EXTICR2_EXTI4_Pos) /*!< 0x0000000F */
-#define AFIO_EXTICR2_EXTI4 AFIO_EXTICR2_EXTI4_Msk /*!< EXTI 4 configuration */
-#define AFIO_EXTICR2_EXTI5_Pos (4U)
-#define AFIO_EXTICR2_EXTI5_Msk (0xFU << AFIO_EXTICR2_EXTI5_Pos) /*!< 0x000000F0 */
-#define AFIO_EXTICR2_EXTI5 AFIO_EXTICR2_EXTI5_Msk /*!< EXTI 5 configuration */
-#define AFIO_EXTICR2_EXTI6_Pos (8U)
-#define AFIO_EXTICR2_EXTI6_Msk (0xFU << AFIO_EXTICR2_EXTI6_Pos) /*!< 0x00000F00 */
-#define AFIO_EXTICR2_EXTI6 AFIO_EXTICR2_EXTI6_Msk /*!< EXTI 6 configuration */
-#define AFIO_EXTICR2_EXTI7_Pos (12U)
-#define AFIO_EXTICR2_EXTI7_Msk (0xFU << AFIO_EXTICR2_EXTI7_Pos) /*!< 0x0000F000 */
-#define AFIO_EXTICR2_EXTI7 AFIO_EXTICR2_EXTI7_Msk /*!< EXTI 7 configuration */
-
-/*!< EXTI4 configuration */
-#define AFIO_EXTICR2_EXTI4_PA ((uint32_t)0x00000000) /*!< PA[4] pin */
-#define AFIO_EXTICR2_EXTI4_PB_Pos (0U)
-#define AFIO_EXTICR2_EXTI4_PB_Msk (0x1U << AFIO_EXTICR2_EXTI4_PB_Pos) /*!< 0x00000001 */
-#define AFIO_EXTICR2_EXTI4_PB AFIO_EXTICR2_EXTI4_PB_Msk /*!< PB[4] pin */
-#define AFIO_EXTICR2_EXTI4_PC_Pos (1U)
-#define AFIO_EXTICR2_EXTI4_PC_Msk (0x1U << AFIO_EXTICR2_EXTI4_PC_Pos) /*!< 0x00000002 */
-#define AFIO_EXTICR2_EXTI4_PC AFIO_EXTICR2_EXTI4_PC_Msk /*!< PC[4] pin */
-#define AFIO_EXTICR2_EXTI4_PD_Pos (0U)
-#define AFIO_EXTICR2_EXTI4_PD_Msk (0x3U << AFIO_EXTICR2_EXTI4_PD_Pos) /*!< 0x00000003 */
-#define AFIO_EXTICR2_EXTI4_PD AFIO_EXTICR2_EXTI4_PD_Msk /*!< PD[4] pin */
-#define AFIO_EXTICR2_EXTI4_PE_Pos (2U)
-#define AFIO_EXTICR2_EXTI4_PE_Msk (0x1U << AFIO_EXTICR2_EXTI4_PE_Pos) /*!< 0x00000004 */
-#define AFIO_EXTICR2_EXTI4_PE AFIO_EXTICR2_EXTI4_PE_Msk /*!< PE[4] pin */
-#define AFIO_EXTICR2_EXTI4_PF_Pos (0U)
-#define AFIO_EXTICR2_EXTI4_PF_Msk (0x5U << AFIO_EXTICR2_EXTI4_PF_Pos) /*!< 0x00000005 */
-#define AFIO_EXTICR2_EXTI4_PF AFIO_EXTICR2_EXTI4_PF_Msk /*!< PF[4] pin */
-#define AFIO_EXTICR2_EXTI4_PG_Pos (1U)
-#define AFIO_EXTICR2_EXTI4_PG_Msk (0x3U << AFIO_EXTICR2_EXTI4_PG_Pos) /*!< 0x00000006 */
-#define AFIO_EXTICR2_EXTI4_PG AFIO_EXTICR2_EXTI4_PG_Msk /*!< PG[4] pin */
-
-/* EXTI5 configuration */
-#define AFIO_EXTICR2_EXTI5_PA ((uint32_t)0x00000000) /*!< PA[5] pin */
-#define AFIO_EXTICR2_EXTI5_PB_Pos (4U)
-#define AFIO_EXTICR2_EXTI5_PB_Msk (0x1U << AFIO_EXTICR2_EXTI5_PB_Pos) /*!< 0x00000010 */
-#define AFIO_EXTICR2_EXTI5_PB AFIO_EXTICR2_EXTI5_PB_Msk /*!< PB[5] pin */
-#define AFIO_EXTICR2_EXTI5_PC_Pos (5U)
-#define AFIO_EXTICR2_EXTI5_PC_Msk (0x1U << AFIO_EXTICR2_EXTI5_PC_Pos) /*!< 0x00000020 */
-#define AFIO_EXTICR2_EXTI5_PC AFIO_EXTICR2_EXTI5_PC_Msk /*!< PC[5] pin */
-#define AFIO_EXTICR2_EXTI5_PD_Pos (4U)
-#define AFIO_EXTICR2_EXTI5_PD_Msk (0x3U << AFIO_EXTICR2_EXTI5_PD_Pos) /*!< 0x00000030 */
-#define AFIO_EXTICR2_EXTI5_PD AFIO_EXTICR2_EXTI5_PD_Msk /*!< PD[5] pin */
-#define AFIO_EXTICR2_EXTI5_PE_Pos (6U)
-#define AFIO_EXTICR2_EXTI5_PE_Msk (0x1U << AFIO_EXTICR2_EXTI5_PE_Pos) /*!< 0x00000040 */
-#define AFIO_EXTICR2_EXTI5_PE AFIO_EXTICR2_EXTI5_PE_Msk /*!< PE[5] pin */
-#define AFIO_EXTICR2_EXTI5_PF_Pos (4U)
-#define AFIO_EXTICR2_EXTI5_PF_Msk (0x5U << AFIO_EXTICR2_EXTI5_PF_Pos) /*!< 0x00000050 */
-#define AFIO_EXTICR2_EXTI5_PF AFIO_EXTICR2_EXTI5_PF_Msk /*!< PF[5] pin */
-#define AFIO_EXTICR2_EXTI5_PG_Pos (5U)
-#define AFIO_EXTICR2_EXTI5_PG_Msk (0x3U << AFIO_EXTICR2_EXTI5_PG_Pos) /*!< 0x00000060 */
-#define AFIO_EXTICR2_EXTI5_PG AFIO_EXTICR2_EXTI5_PG_Msk /*!< PG[5] pin */
-
-/*!< EXTI6 configuration */
-#define AFIO_EXTICR2_EXTI6_PA ((uint32_t)0x00000000) /*!< PA[6] pin */
-#define AFIO_EXTICR2_EXTI6_PB_Pos (8U)
-#define AFIO_EXTICR2_EXTI6_PB_Msk (0x1U << AFIO_EXTICR2_EXTI6_PB_Pos) /*!< 0x00000100 */
-#define AFIO_EXTICR2_EXTI6_PB AFIO_EXTICR2_EXTI6_PB_Msk /*!< PB[6] pin */
-#define AFIO_EXTICR2_EXTI6_PC_Pos (9U)
-#define AFIO_EXTICR2_EXTI6_PC_Msk (0x1U << AFIO_EXTICR2_EXTI6_PC_Pos) /*!< 0x00000200 */
-#define AFIO_EXTICR2_EXTI6_PC AFIO_EXTICR2_EXTI6_PC_Msk /*!< PC[6] pin */
-#define AFIO_EXTICR2_EXTI6_PD_Pos (8U)
-#define AFIO_EXTICR2_EXTI6_PD_Msk (0x3U << AFIO_EXTICR2_EXTI6_PD_Pos) /*!< 0x00000300 */
-#define AFIO_EXTICR2_EXTI6_PD AFIO_EXTICR2_EXTI6_PD_Msk /*!< PD[6] pin */
-#define AFIO_EXTICR2_EXTI6_PE_Pos (10U)
-#define AFIO_EXTICR2_EXTI6_PE_Msk (0x1U << AFIO_EXTICR2_EXTI6_PE_Pos) /*!< 0x00000400 */
-#define AFIO_EXTICR2_EXTI6_PE AFIO_EXTICR2_EXTI6_PE_Msk /*!< PE[6] pin */
-#define AFIO_EXTICR2_EXTI6_PF_Pos (8U)
-#define AFIO_EXTICR2_EXTI6_PF_Msk (0x5U << AFIO_EXTICR2_EXTI6_PF_Pos) /*!< 0x00000500 */
-#define AFIO_EXTICR2_EXTI6_PF AFIO_EXTICR2_EXTI6_PF_Msk /*!< PF[6] pin */
-#define AFIO_EXTICR2_EXTI6_PG_Pos (9U)
-#define AFIO_EXTICR2_EXTI6_PG_Msk (0x3U << AFIO_EXTICR2_EXTI6_PG_Pos) /*!< 0x00000600 */
-#define AFIO_EXTICR2_EXTI6_PG AFIO_EXTICR2_EXTI6_PG_Msk /*!< PG[6] pin */
-
-/*!< EXTI7 configuration */
-#define AFIO_EXTICR2_EXTI7_PA ((uint32_t)0x00000000) /*!< PA[7] pin */
-#define AFIO_EXTICR2_EXTI7_PB_Pos (12U)
-#define AFIO_EXTICR2_EXTI7_PB_Msk (0x1U << AFIO_EXTICR2_EXTI7_PB_Pos) /*!< 0x00001000 */
-#define AFIO_EXTICR2_EXTI7_PB AFIO_EXTICR2_EXTI7_PB_Msk /*!< PB[7] pin */
-#define AFIO_EXTICR2_EXTI7_PC_Pos (13U)
-#define AFIO_EXTICR2_EXTI7_PC_Msk (0x1U << AFIO_EXTICR2_EXTI7_PC_Pos) /*!< 0x00002000 */
-#define AFIO_EXTICR2_EXTI7_PC AFIO_EXTICR2_EXTI7_PC_Msk /*!< PC[7] pin */
-#define AFIO_EXTICR2_EXTI7_PD_Pos (12U)
-#define AFIO_EXTICR2_EXTI7_PD_Msk (0x3U << AFIO_EXTICR2_EXTI7_PD_Pos) /*!< 0x00003000 */
-#define AFIO_EXTICR2_EXTI7_PD AFIO_EXTICR2_EXTI7_PD_Msk /*!< PD[7] pin */
-#define AFIO_EXTICR2_EXTI7_PE_Pos (14U)
-#define AFIO_EXTICR2_EXTI7_PE_Msk (0x1U << AFIO_EXTICR2_EXTI7_PE_Pos) /*!< 0x00004000 */
-#define AFIO_EXTICR2_EXTI7_PE AFIO_EXTICR2_EXTI7_PE_Msk /*!< PE[7] pin */
-#define AFIO_EXTICR2_EXTI7_PF_Pos (12U)
-#define AFIO_EXTICR2_EXTI7_PF_Msk (0x5U << AFIO_EXTICR2_EXTI7_PF_Pos) /*!< 0x00005000 */
-#define AFIO_EXTICR2_EXTI7_PF AFIO_EXTICR2_EXTI7_PF_Msk /*!< PF[7] pin */
-#define AFIO_EXTICR2_EXTI7_PG_Pos (13U)
-#define AFIO_EXTICR2_EXTI7_PG_Msk (0x3U << AFIO_EXTICR2_EXTI7_PG_Pos) /*!< 0x00006000 */
-#define AFIO_EXTICR2_EXTI7_PG AFIO_EXTICR2_EXTI7_PG_Msk /*!< PG[7] pin */
-
-/***************** Bit definition for AFIO_EXTICR3 register *****************/
-#define AFIO_EXTICR3_EXTI8_Pos (0U)
-#define AFIO_EXTICR3_EXTI8_Msk (0xFU << AFIO_EXTICR3_EXTI8_Pos) /*!< 0x0000000F */
-#define AFIO_EXTICR3_EXTI8 AFIO_EXTICR3_EXTI8_Msk /*!< EXTI 8 configuration */
-#define AFIO_EXTICR3_EXTI9_Pos (4U)
-#define AFIO_EXTICR3_EXTI9_Msk (0xFU << AFIO_EXTICR3_EXTI9_Pos) /*!< 0x000000F0 */
-#define AFIO_EXTICR3_EXTI9 AFIO_EXTICR3_EXTI9_Msk /*!< EXTI 9 configuration */
-#define AFIO_EXTICR3_EXTI10_Pos (8U)
-#define AFIO_EXTICR3_EXTI10_Msk (0xFU << AFIO_EXTICR3_EXTI10_Pos) /*!< 0x00000F00 */
-#define AFIO_EXTICR3_EXTI10 AFIO_EXTICR3_EXTI10_Msk /*!< EXTI 10 configuration */
-#define AFIO_EXTICR3_EXTI11_Pos (12U)
-#define AFIO_EXTICR3_EXTI11_Msk (0xFU << AFIO_EXTICR3_EXTI11_Pos) /*!< 0x0000F000 */
-#define AFIO_EXTICR3_EXTI11 AFIO_EXTICR3_EXTI11_Msk /*!< EXTI 11 configuration */
-
-/*!< EXTI8 configuration */
-#define AFIO_EXTICR3_EXTI8_PA ((uint32_t)0x00000000) /*!< PA[8] pin */
-#define AFIO_EXTICR3_EXTI8_PB_Pos (0U)
-#define AFIO_EXTICR3_EXTI8_PB_Msk (0x1U << AFIO_EXTICR3_EXTI8_PB_Pos) /*!< 0x00000001 */
-#define AFIO_EXTICR3_EXTI8_PB AFIO_EXTICR3_EXTI8_PB_Msk /*!< PB[8] pin */
-#define AFIO_EXTICR3_EXTI8_PC_Pos (1U)
-#define AFIO_EXTICR3_EXTI8_PC_Msk (0x1U << AFIO_EXTICR3_EXTI8_PC_Pos) /*!< 0x00000002 */
-#define AFIO_EXTICR3_EXTI8_PC AFIO_EXTICR3_EXTI8_PC_Msk /*!< PC[8] pin */
-#define AFIO_EXTICR3_EXTI8_PD_Pos (0U)
-#define AFIO_EXTICR3_EXTI8_PD_Msk (0x3U << AFIO_EXTICR3_EXTI8_PD_Pos) /*!< 0x00000003 */
-#define AFIO_EXTICR3_EXTI8_PD AFIO_EXTICR3_EXTI8_PD_Msk /*!< PD[8] pin */
-#define AFIO_EXTICR3_EXTI8_PE_Pos (2U)
-#define AFIO_EXTICR3_EXTI8_PE_Msk (0x1U << AFIO_EXTICR3_EXTI8_PE_Pos) /*!< 0x00000004 */
-#define AFIO_EXTICR3_EXTI8_PE AFIO_EXTICR3_EXTI8_PE_Msk /*!< PE[8] pin */
-#define AFIO_EXTICR3_EXTI8_PF_Pos (0U)
-#define AFIO_EXTICR3_EXTI8_PF_Msk (0x5U << AFIO_EXTICR3_EXTI8_PF_Pos) /*!< 0x00000005 */
-#define AFIO_EXTICR3_EXTI8_PF AFIO_EXTICR3_EXTI8_PF_Msk /*!< PF[8] pin */
-#define AFIO_EXTICR3_EXTI8_PG_Pos (1U)
-#define AFIO_EXTICR3_EXTI8_PG_Msk (0x3U << AFIO_EXTICR3_EXTI8_PG_Pos) /*!< 0x00000006 */
-#define AFIO_EXTICR3_EXTI8_PG AFIO_EXTICR3_EXTI8_PG_Msk /*!< PG[8] pin */
-
-/*!< EXTI9 configuration */
-#define AFIO_EXTICR3_EXTI9_PA ((uint32_t)0x00000000) /*!< PA[9] pin */
-#define AFIO_EXTICR3_EXTI9_PB_Pos (4U)
-#define AFIO_EXTICR3_EXTI9_PB_Msk (0x1U << AFIO_EXTICR3_EXTI9_PB_Pos) /*!< 0x00000010 */
-#define AFIO_EXTICR3_EXTI9_PB AFIO_EXTICR3_EXTI9_PB_Msk /*!< PB[9] pin */
-#define AFIO_EXTICR3_EXTI9_PC_Pos (5U)
-#define AFIO_EXTICR3_EXTI9_PC_Msk (0x1U << AFIO_EXTICR3_EXTI9_PC_Pos) /*!< 0x00000020 */
-#define AFIO_EXTICR3_EXTI9_PC AFIO_EXTICR3_EXTI9_PC_Msk /*!< PC[9] pin */
-#define AFIO_EXTICR3_EXTI9_PD_Pos (4U)
-#define AFIO_EXTICR3_EXTI9_PD_Msk (0x3U << AFIO_EXTICR3_EXTI9_PD_Pos) /*!< 0x00000030 */
-#define AFIO_EXTICR3_EXTI9_PD AFIO_EXTICR3_EXTI9_PD_Msk /*!< PD[9] pin */
-#define AFIO_EXTICR3_EXTI9_PE_Pos (6U)
-#define AFIO_EXTICR3_EXTI9_PE_Msk (0x1U << AFIO_EXTICR3_EXTI9_PE_Pos) /*!< 0x00000040 */
-#define AFIO_EXTICR3_EXTI9_PE AFIO_EXTICR3_EXTI9_PE_Msk /*!< PE[9] pin */
-#define AFIO_EXTICR3_EXTI9_PF_Pos (4U)
-#define AFIO_EXTICR3_EXTI9_PF_Msk (0x5U << AFIO_EXTICR3_EXTI9_PF_Pos) /*!< 0x00000050 */
-#define AFIO_EXTICR3_EXTI9_PF AFIO_EXTICR3_EXTI9_PF_Msk /*!< PF[9] pin */
-#define AFIO_EXTICR3_EXTI9_PG_Pos (5U)
-#define AFIO_EXTICR3_EXTI9_PG_Msk (0x3U << AFIO_EXTICR3_EXTI9_PG_Pos) /*!< 0x00000060 */
-#define AFIO_EXTICR3_EXTI9_PG AFIO_EXTICR3_EXTI9_PG_Msk /*!< PG[9] pin */
-
-/*!< EXTI10 configuration */
-#define AFIO_EXTICR3_EXTI10_PA ((uint32_t)0x00000000) /*!< PA[10] pin */
-#define AFIO_EXTICR3_EXTI10_PB_Pos (8U)
-#define AFIO_EXTICR3_EXTI10_PB_Msk (0x1U << AFIO_EXTICR3_EXTI10_PB_Pos) /*!< 0x00000100 */
-#define AFIO_EXTICR3_EXTI10_PB AFIO_EXTICR3_EXTI10_PB_Msk /*!< PB[10] pin */
-#define AFIO_EXTICR3_EXTI10_PC_Pos (9U)
-#define AFIO_EXTICR3_EXTI10_PC_Msk (0x1U << AFIO_EXTICR3_EXTI10_PC_Pos) /*!< 0x00000200 */
-#define AFIO_EXTICR3_EXTI10_PC AFIO_EXTICR3_EXTI10_PC_Msk /*!< PC[10] pin */
-#define AFIO_EXTICR3_EXTI10_PD_Pos (8U)
-#define AFIO_EXTICR3_EXTI10_PD_Msk (0x3U << AFIO_EXTICR3_EXTI10_PD_Pos) /*!< 0x00000300 */
-#define AFIO_EXTICR3_EXTI10_PD AFIO_EXTICR3_EXTI10_PD_Msk /*!< PD[10] pin */
-#define AFIO_EXTICR3_EXTI10_PE_Pos (10U)
-#define AFIO_EXTICR3_EXTI10_PE_Msk (0x1U << AFIO_EXTICR3_EXTI10_PE_Pos) /*!< 0x00000400 */
-#define AFIO_EXTICR3_EXTI10_PE AFIO_EXTICR3_EXTI10_PE_Msk /*!< PE[10] pin */
-#define AFIO_EXTICR3_EXTI10_PF_Pos (8U)
-#define AFIO_EXTICR3_EXTI10_PF_Msk (0x5U << AFIO_EXTICR3_EXTI10_PF_Pos) /*!< 0x00000500 */
-#define AFIO_EXTICR3_EXTI10_PF AFIO_EXTICR3_EXTI10_PF_Msk /*!< PF[10] pin */
-#define AFIO_EXTICR3_EXTI10_PG_Pos (9U)
-#define AFIO_EXTICR3_EXTI10_PG_Msk (0x3U << AFIO_EXTICR3_EXTI10_PG_Pos) /*!< 0x00000600 */
-#define AFIO_EXTICR3_EXTI10_PG AFIO_EXTICR3_EXTI10_PG_Msk /*!< PG[10] pin */
-
-/*!< EXTI11 configuration */
-#define AFIO_EXTICR3_EXTI11_PA ((uint32_t)0x00000000) /*!< PA[11] pin */
-#define AFIO_EXTICR3_EXTI11_PB_Pos (12U)
-#define AFIO_EXTICR3_EXTI11_PB_Msk (0x1U << AFIO_EXTICR3_EXTI11_PB_Pos) /*!< 0x00001000 */
-#define AFIO_EXTICR3_EXTI11_PB AFIO_EXTICR3_EXTI11_PB_Msk /*!< PB[11] pin */
-#define AFIO_EXTICR3_EXTI11_PC_Pos (13U)
-#define AFIO_EXTICR3_EXTI11_PC_Msk (0x1U << AFIO_EXTICR3_EXTI11_PC_Pos) /*!< 0x00002000 */
-#define AFIO_EXTICR3_EXTI11_PC AFIO_EXTICR3_EXTI11_PC_Msk /*!< PC[11] pin */
-#define AFIO_EXTICR3_EXTI11_PD_Pos (12U)
-#define AFIO_EXTICR3_EXTI11_PD_Msk (0x3U << AFIO_EXTICR3_EXTI11_PD_Pos) /*!< 0x00003000 */
-#define AFIO_EXTICR3_EXTI11_PD AFIO_EXTICR3_EXTI11_PD_Msk /*!< PD[11] pin */
-#define AFIO_EXTICR3_EXTI11_PE_Pos (14U)
-#define AFIO_EXTICR3_EXTI11_PE_Msk (0x1U << AFIO_EXTICR3_EXTI11_PE_Pos) /*!< 0x00004000 */
-#define AFIO_EXTICR3_EXTI11_PE AFIO_EXTICR3_EXTI11_PE_Msk /*!< PE[11] pin */
-#define AFIO_EXTICR3_EXTI11_PF_Pos (12U)
-#define AFIO_EXTICR3_EXTI11_PF_Msk (0x5U << AFIO_EXTICR3_EXTI11_PF_Pos) /*!< 0x00005000 */
-#define AFIO_EXTICR3_EXTI11_PF AFIO_EXTICR3_EXTI11_PF_Msk /*!< PF[11] pin */
-#define AFIO_EXTICR3_EXTI11_PG_Pos (13U)
-#define AFIO_EXTICR3_EXTI11_PG_Msk (0x3U << AFIO_EXTICR3_EXTI11_PG_Pos) /*!< 0x00006000 */
-#define AFIO_EXTICR3_EXTI11_PG AFIO_EXTICR3_EXTI11_PG_Msk /*!< PG[11] pin */
-
-/***************** Bit definition for AFIO_EXTICR4 register *****************/
-#define AFIO_EXTICR4_EXTI12_Pos (0U)
-#define AFIO_EXTICR4_EXTI12_Msk (0xFU << AFIO_EXTICR4_EXTI12_Pos) /*!< 0x0000000F */
-#define AFIO_EXTICR4_EXTI12 AFIO_EXTICR4_EXTI12_Msk /*!< EXTI 12 configuration */
-#define AFIO_EXTICR4_EXTI13_Pos (4U)
-#define AFIO_EXTICR4_EXTI13_Msk (0xFU << AFIO_EXTICR4_EXTI13_Pos) /*!< 0x000000F0 */
-#define AFIO_EXTICR4_EXTI13 AFIO_EXTICR4_EXTI13_Msk /*!< EXTI 13 configuration */
-#define AFIO_EXTICR4_EXTI14_Pos (8U)
-#define AFIO_EXTICR4_EXTI14_Msk (0xFU << AFIO_EXTICR4_EXTI14_Pos) /*!< 0x00000F00 */
-#define AFIO_EXTICR4_EXTI14 AFIO_EXTICR4_EXTI14_Msk /*!< EXTI 14 configuration */
-#define AFIO_EXTICR4_EXTI15_Pos (12U)
-#define AFIO_EXTICR4_EXTI15_Msk (0xFU << AFIO_EXTICR4_EXTI15_Pos) /*!< 0x0000F000 */
-#define AFIO_EXTICR4_EXTI15 AFIO_EXTICR4_EXTI15_Msk /*!< EXTI 15 configuration */
-
-/* EXTI12 configuration */
-#define AFIO_EXTICR4_EXTI12_PA ((uint32_t)0x00000000) /*!< PA[12] pin */
-#define AFIO_EXTICR4_EXTI12_PB_Pos (0U)
-#define AFIO_EXTICR4_EXTI12_PB_Msk (0x1U << AFIO_EXTICR4_EXTI12_PB_Pos) /*!< 0x00000001 */
-#define AFIO_EXTICR4_EXTI12_PB AFIO_EXTICR4_EXTI12_PB_Msk /*!< PB[12] pin */
-#define AFIO_EXTICR4_EXTI12_PC_Pos (1U)
-#define AFIO_EXTICR4_EXTI12_PC_Msk (0x1U << AFIO_EXTICR4_EXTI12_PC_Pos) /*!< 0x00000002 */
-#define AFIO_EXTICR4_EXTI12_PC AFIO_EXTICR4_EXTI12_PC_Msk /*!< PC[12] pin */
-#define AFIO_EXTICR4_EXTI12_PD_Pos (0U)
-#define AFIO_EXTICR4_EXTI12_PD_Msk (0x3U << AFIO_EXTICR4_EXTI12_PD_Pos) /*!< 0x00000003 */
-#define AFIO_EXTICR4_EXTI12_PD AFIO_EXTICR4_EXTI12_PD_Msk /*!< PD[12] pin */
-#define AFIO_EXTICR4_EXTI12_PE_Pos (2U)
-#define AFIO_EXTICR4_EXTI12_PE_Msk (0x1U << AFIO_EXTICR4_EXTI12_PE_Pos) /*!< 0x00000004 */
-#define AFIO_EXTICR4_EXTI12_PE AFIO_EXTICR4_EXTI12_PE_Msk /*!< PE[12] pin */
-#define AFIO_EXTICR4_EXTI12_PF_Pos (0U)
-#define AFIO_EXTICR4_EXTI12_PF_Msk (0x5U << AFIO_EXTICR4_EXTI12_PF_Pos) /*!< 0x00000005 */
-#define AFIO_EXTICR4_EXTI12_PF AFIO_EXTICR4_EXTI12_PF_Msk /*!< PF[12] pin */
-#define AFIO_EXTICR4_EXTI12_PG_Pos (1U)
-#define AFIO_EXTICR4_EXTI12_PG_Msk (0x3U << AFIO_EXTICR4_EXTI12_PG_Pos) /*!< 0x00000006 */
-#define AFIO_EXTICR4_EXTI12_PG AFIO_EXTICR4_EXTI12_PG_Msk /*!< PG[12] pin */
-
-/* EXTI13 configuration */
-#define AFIO_EXTICR4_EXTI13_PA ((uint32_t)0x00000000) /*!< PA[13] pin */
-#define AFIO_EXTICR4_EXTI13_PB_Pos (4U)
-#define AFIO_EXTICR4_EXTI13_PB_Msk (0x1U << AFIO_EXTICR4_EXTI13_PB_Pos) /*!< 0x00000010 */
-#define AFIO_EXTICR4_EXTI13_PB AFIO_EXTICR4_EXTI13_PB_Msk /*!< PB[13] pin */
-#define AFIO_EXTICR4_EXTI13_PC_Pos (5U)
-#define AFIO_EXTICR4_EXTI13_PC_Msk (0x1U << AFIO_EXTICR4_EXTI13_PC_Pos) /*!< 0x00000020 */
-#define AFIO_EXTICR4_EXTI13_PC AFIO_EXTICR4_EXTI13_PC_Msk /*!< PC[13] pin */
-#define AFIO_EXTICR4_EXTI13_PD_Pos (4U)
-#define AFIO_EXTICR4_EXTI13_PD_Msk (0x3U << AFIO_EXTICR4_EXTI13_PD_Pos) /*!< 0x00000030 */
-#define AFIO_EXTICR4_EXTI13_PD AFIO_EXTICR4_EXTI13_PD_Msk /*!< PD[13] pin */
-#define AFIO_EXTICR4_EXTI13_PE_Pos (6U)
-#define AFIO_EXTICR4_EXTI13_PE_Msk (0x1U << AFIO_EXTICR4_EXTI13_PE_Pos) /*!< 0x00000040 */
-#define AFIO_EXTICR4_EXTI13_PE AFIO_EXTICR4_EXTI13_PE_Msk /*!< PE[13] pin */
-#define AFIO_EXTICR4_EXTI13_PF_Pos (4U)
-#define AFIO_EXTICR4_EXTI13_PF_Msk (0x5U << AFIO_EXTICR4_EXTI13_PF_Pos) /*!< 0x00000050 */
-#define AFIO_EXTICR4_EXTI13_PF AFIO_EXTICR4_EXTI13_PF_Msk /*!< PF[13] pin */
-#define AFIO_EXTICR4_EXTI13_PG_Pos (5U)
-#define AFIO_EXTICR4_EXTI13_PG_Msk (0x3U << AFIO_EXTICR4_EXTI13_PG_Pos) /*!< 0x00000060 */
-#define AFIO_EXTICR4_EXTI13_PG AFIO_EXTICR4_EXTI13_PG_Msk /*!< PG[13] pin */
-
-/*!< EXTI14 configuration */
-#define AFIO_EXTICR4_EXTI14_PA ((uint32_t)0x00000000) /*!< PA[14] pin */
-#define AFIO_EXTICR4_EXTI14_PB_Pos (8U)
-#define AFIO_EXTICR4_EXTI14_PB_Msk (0x1U << AFIO_EXTICR4_EXTI14_PB_Pos) /*!< 0x00000100 */
-#define AFIO_EXTICR4_EXTI14_PB AFIO_EXTICR4_EXTI14_PB_Msk /*!< PB[14] pin */
-#define AFIO_EXTICR4_EXTI14_PC_Pos (9U)
-#define AFIO_EXTICR4_EXTI14_PC_Msk (0x1U << AFIO_EXTICR4_EXTI14_PC_Pos) /*!< 0x00000200 */
-#define AFIO_EXTICR4_EXTI14_PC AFIO_EXTICR4_EXTI14_PC_Msk /*!< PC[14] pin */
-#define AFIO_EXTICR4_EXTI14_PD_Pos (8U)
-#define AFIO_EXTICR4_EXTI14_PD_Msk (0x3U << AFIO_EXTICR4_EXTI14_PD_Pos) /*!< 0x00000300 */
-#define AFIO_EXTICR4_EXTI14_PD AFIO_EXTICR4_EXTI14_PD_Msk /*!< PD[14] pin */
-#define AFIO_EXTICR4_EXTI14_PE_Pos (10U)
-#define AFIO_EXTICR4_EXTI14_PE_Msk (0x1U << AFIO_EXTICR4_EXTI14_PE_Pos) /*!< 0x00000400 */
-#define AFIO_EXTICR4_EXTI14_PE AFIO_EXTICR4_EXTI14_PE_Msk /*!< PE[14] pin */
-#define AFIO_EXTICR4_EXTI14_PF_Pos (8U)
-#define AFIO_EXTICR4_EXTI14_PF_Msk (0x5U << AFIO_EXTICR4_EXTI14_PF_Pos) /*!< 0x00000500 */
-#define AFIO_EXTICR4_EXTI14_PF AFIO_EXTICR4_EXTI14_PF_Msk /*!< PF[14] pin */
-#define AFIO_EXTICR4_EXTI14_PG_Pos (9U)
-#define AFIO_EXTICR4_EXTI14_PG_Msk (0x3U << AFIO_EXTICR4_EXTI14_PG_Pos) /*!< 0x00000600 */
-#define AFIO_EXTICR4_EXTI14_PG AFIO_EXTICR4_EXTI14_PG_Msk /*!< PG[14] pin */
-
-/*!< EXTI15 configuration */
-#define AFIO_EXTICR4_EXTI15_PA ((uint32_t)0x00000000) /*!< PA[15] pin */
-#define AFIO_EXTICR4_EXTI15_PB_Pos (12U)
-#define AFIO_EXTICR4_EXTI15_PB_Msk (0x1U << AFIO_EXTICR4_EXTI15_PB_Pos) /*!< 0x00001000 */
-#define AFIO_EXTICR4_EXTI15_PB AFIO_EXTICR4_EXTI15_PB_Msk /*!< PB[15] pin */
-#define AFIO_EXTICR4_EXTI15_PC_Pos (13U)
-#define AFIO_EXTICR4_EXTI15_PC_Msk (0x1U << AFIO_EXTICR4_EXTI15_PC_Pos) /*!< 0x00002000 */
-#define AFIO_EXTICR4_EXTI15_PC AFIO_EXTICR4_EXTI15_PC_Msk /*!< PC[15] pin */
-#define AFIO_EXTICR4_EXTI15_PD_Pos (12U)
-#define AFIO_EXTICR4_EXTI15_PD_Msk (0x3U << AFIO_EXTICR4_EXTI15_PD_Pos) /*!< 0x00003000 */
-#define AFIO_EXTICR4_EXTI15_PD AFIO_EXTICR4_EXTI15_PD_Msk /*!< PD[15] pin */
-#define AFIO_EXTICR4_EXTI15_PE_Pos (14U)
-#define AFIO_EXTICR4_EXTI15_PE_Msk (0x1U << AFIO_EXTICR4_EXTI15_PE_Pos) /*!< 0x00004000 */
-#define AFIO_EXTICR4_EXTI15_PE AFIO_EXTICR4_EXTI15_PE_Msk /*!< PE[15] pin */
-#define AFIO_EXTICR4_EXTI15_PF_Pos (12U)
-#define AFIO_EXTICR4_EXTI15_PF_Msk (0x5U << AFIO_EXTICR4_EXTI15_PF_Pos) /*!< 0x00005000 */
-#define AFIO_EXTICR4_EXTI15_PF AFIO_EXTICR4_EXTI15_PF_Msk /*!< PF[15] pin */
-#define AFIO_EXTICR4_EXTI15_PG_Pos (13U)
-#define AFIO_EXTICR4_EXTI15_PG_Msk (0x3U << AFIO_EXTICR4_EXTI15_PG_Pos) /*!< 0x00006000 */
-#define AFIO_EXTICR4_EXTI15_PG AFIO_EXTICR4_EXTI15_PG_Msk /*!< PG[15] pin */
-
-/****************** Bit definition for AFIO_MAPR2 register ******************/
-
-
-
-/******************************************************************************/
-/* */
-/* SystemTick */
-/* */
-/******************************************************************************/
-
-/***************** Bit definition for SysTick_CTRL register *****************/
-#define SysTick_CTRL_ENABLE ((uint32_t)0x00000001) /*!< Counter enable */
-#define SysTick_CTRL_TICKINT ((uint32_t)0x00000002) /*!< Counting down to 0 pends the SysTick handler */
-#define SysTick_CTRL_CLKSOURCE ((uint32_t)0x00000004) /*!< Clock source */
-#define SysTick_CTRL_COUNTFLAG ((uint32_t)0x00010000) /*!< Count Flag */
-
-/***************** Bit definition for SysTick_LOAD register *****************/
-#define SysTick_LOAD_RELOAD ((uint32_t)0x00FFFFFF) /*!< Value to load into the SysTick Current Value Register when the counter reaches 0 */
-
-/***************** Bit definition for SysTick_VAL register ******************/
-#define SysTick_VAL_CURRENT ((uint32_t)0x00FFFFFF) /*!< Current value at the time the register is accessed */
-
-/***************** Bit definition for SysTick_CALIB register ****************/
-#define SysTick_CALIB_TENMS ((uint32_t)0x00FFFFFF) /*!< Reload value to use for 10ms timing */
-#define SysTick_CALIB_SKEW ((uint32_t)0x40000000) /*!< Calibration value is not exactly 10 ms */
-#define SysTick_CALIB_NOREF ((uint32_t)0x80000000) /*!< The reference clock is not provided */
-
-/******************************************************************************/
-/* */
-/* Nested Vectored Interrupt Controller */
-/* */
-/******************************************************************************/
-
-/****************** Bit definition for NVIC_ISER register *******************/
-#define NVIC_ISER_SETENA_Pos (0U)
-#define NVIC_ISER_SETENA_Msk (0xFFFFFFFFU << NVIC_ISER_SETENA_Pos) /*!< 0xFFFFFFFF */
-#define NVIC_ISER_SETENA NVIC_ISER_SETENA_Msk /*!< Interrupt set enable bits */
-#define NVIC_ISER_SETENA_0 (0x00000001U << NVIC_ISER_SETENA_Pos) /*!< 0x00000001 */
-#define NVIC_ISER_SETENA_1 (0x00000002U << NVIC_ISER_SETENA_Pos) /*!< 0x00000002 */
-#define NVIC_ISER_SETENA_2 (0x00000004U << NVIC_ISER_SETENA_Pos) /*!< 0x00000004 */
-#define NVIC_ISER_SETENA_3 (0x00000008U << NVIC_ISER_SETENA_Pos) /*!< 0x00000008 */
-#define NVIC_ISER_SETENA_4 (0x00000010U << NVIC_ISER_SETENA_Pos) /*!< 0x00000010 */
-#define NVIC_ISER_SETENA_5 (0x00000020U << NVIC_ISER_SETENA_Pos) /*!< 0x00000020 */
-#define NVIC_ISER_SETENA_6 (0x00000040U << NVIC_ISER_SETENA_Pos) /*!< 0x00000040 */
-#define NVIC_ISER_SETENA_7 (0x00000080U << NVIC_ISER_SETENA_Pos) /*!< 0x00000080 */
-#define NVIC_ISER_SETENA_8 (0x00000100U << NVIC_ISER_SETENA_Pos) /*!< 0x00000100 */
-#define NVIC_ISER_SETENA_9 (0x00000200U << NVIC_ISER_SETENA_Pos) /*!< 0x00000200 */
-#define NVIC_ISER_SETENA_10 (0x00000400U << NVIC_ISER_SETENA_Pos) /*!< 0x00000400 */
-#define NVIC_ISER_SETENA_11 (0x00000800U << NVIC_ISER_SETENA_Pos) /*!< 0x00000800 */
-#define NVIC_ISER_SETENA_12 (0x00001000U << NVIC_ISER_SETENA_Pos) /*!< 0x00001000 */
-#define NVIC_ISER_SETENA_13 (0x00002000U << NVIC_ISER_SETENA_Pos) /*!< 0x00002000 */
-#define NVIC_ISER_SETENA_14 (0x00004000U << NVIC_ISER_SETENA_Pos) /*!< 0x00004000 */
-#define NVIC_ISER_SETENA_15 (0x00008000U << NVIC_ISER_SETENA_Pos) /*!< 0x00008000 */
-#define NVIC_ISER_SETENA_16 (0x00010000U << NVIC_ISER_SETENA_Pos) /*!< 0x00010000 */
-#define NVIC_ISER_SETENA_17 (0x00020000U << NVIC_ISER_SETENA_Pos) /*!< 0x00020000 */
-#define NVIC_ISER_SETENA_18 (0x00040000U << NVIC_ISER_SETENA_Pos) /*!< 0x00040000 */
-#define NVIC_ISER_SETENA_19 (0x00080000U << NVIC_ISER_SETENA_Pos) /*!< 0x00080000 */
-#define NVIC_ISER_SETENA_20 (0x00100000U << NVIC_ISER_SETENA_Pos) /*!< 0x00100000 */
-#define NVIC_ISER_SETENA_21 (0x00200000U << NVIC_ISER_SETENA_Pos) /*!< 0x00200000 */
-#define NVIC_ISER_SETENA_22 (0x00400000U << NVIC_ISER_SETENA_Pos) /*!< 0x00400000 */
-#define NVIC_ISER_SETENA_23 (0x00800000U << NVIC_ISER_SETENA_Pos) /*!< 0x00800000 */
-#define NVIC_ISER_SETENA_24 (0x01000000U << NVIC_ISER_SETENA_Pos) /*!< 0x01000000 */
-#define NVIC_ISER_SETENA_25 (0x02000000U << NVIC_ISER_SETENA_Pos) /*!< 0x02000000 */
-#define NVIC_ISER_SETENA_26 (0x04000000U << NVIC_ISER_SETENA_Pos) /*!< 0x04000000 */
-#define NVIC_ISER_SETENA_27 (0x08000000U << NVIC_ISER_SETENA_Pos) /*!< 0x08000000 */
-#define NVIC_ISER_SETENA_28 (0x10000000U << NVIC_ISER_SETENA_Pos) /*!< 0x10000000 */
-#define NVIC_ISER_SETENA_29 (0x20000000U << NVIC_ISER_SETENA_Pos) /*!< 0x20000000 */
-#define NVIC_ISER_SETENA_30 (0x40000000U << NVIC_ISER_SETENA_Pos) /*!< 0x40000000 */
-#define NVIC_ISER_SETENA_31 (0x80000000U << NVIC_ISER_SETENA_Pos) /*!< 0x80000000 */
-
-/****************** Bit definition for NVIC_ICER register *******************/
-#define NVIC_ICER_CLRENA_Pos (0U)
-#define NVIC_ICER_CLRENA_Msk (0xFFFFFFFFU << NVIC_ICER_CLRENA_Pos) /*!< 0xFFFFFFFF */
-#define NVIC_ICER_CLRENA NVIC_ICER_CLRENA_Msk /*!< Interrupt clear-enable bits */
-#define NVIC_ICER_CLRENA_0 (0x00000001U << NVIC_ICER_CLRENA_Pos) /*!< 0x00000001 */
-#define NVIC_ICER_CLRENA_1 (0x00000002U << NVIC_ICER_CLRENA_Pos) /*!< 0x00000002 */
-#define NVIC_ICER_CLRENA_2 (0x00000004U << NVIC_ICER_CLRENA_Pos) /*!< 0x00000004 */
-#define NVIC_ICER_CLRENA_3 (0x00000008U << NVIC_ICER_CLRENA_Pos) /*!< 0x00000008 */
-#define NVIC_ICER_CLRENA_4 (0x00000010U << NVIC_ICER_CLRENA_Pos) /*!< 0x00000010 */
-#define NVIC_ICER_CLRENA_5 (0x00000020U << NVIC_ICER_CLRENA_Pos) /*!< 0x00000020 */
-#define NVIC_ICER_CLRENA_6 (0x00000040U << NVIC_ICER_CLRENA_Pos) /*!< 0x00000040 */
-#define NVIC_ICER_CLRENA_7 (0x00000080U << NVIC_ICER_CLRENA_Pos) /*!< 0x00000080 */
-#define NVIC_ICER_CLRENA_8 (0x00000100U << NVIC_ICER_CLRENA_Pos) /*!< 0x00000100 */
-#define NVIC_ICER_CLRENA_9 (0x00000200U << NVIC_ICER_CLRENA_Pos) /*!< 0x00000200 */
-#define NVIC_ICER_CLRENA_10 (0x00000400U << NVIC_ICER_CLRENA_Pos) /*!< 0x00000400 */
-#define NVIC_ICER_CLRENA_11 (0x00000800U << NVIC_ICER_CLRENA_Pos) /*!< 0x00000800 */
-#define NVIC_ICER_CLRENA_12 (0x00001000U << NVIC_ICER_CLRENA_Pos) /*!< 0x00001000 */
-#define NVIC_ICER_CLRENA_13 (0x00002000U << NVIC_ICER_CLRENA_Pos) /*!< 0x00002000 */
-#define NVIC_ICER_CLRENA_14 (0x00004000U << NVIC_ICER_CLRENA_Pos) /*!< 0x00004000 */
-#define NVIC_ICER_CLRENA_15 (0x00008000U << NVIC_ICER_CLRENA_Pos) /*!< 0x00008000 */
-#define NVIC_ICER_CLRENA_16 (0x00010000U << NVIC_ICER_CLRENA_Pos) /*!< 0x00010000 */
-#define NVIC_ICER_CLRENA_17 (0x00020000U << NVIC_ICER_CLRENA_Pos) /*!< 0x00020000 */
-#define NVIC_ICER_CLRENA_18 (0x00040000U << NVIC_ICER_CLRENA_Pos) /*!< 0x00040000 */
-#define NVIC_ICER_CLRENA_19 (0x00080000U << NVIC_ICER_CLRENA_Pos) /*!< 0x00080000 */
-#define NVIC_ICER_CLRENA_20 (0x00100000U << NVIC_ICER_CLRENA_Pos) /*!< 0x00100000 */
-#define NVIC_ICER_CLRENA_21 (0x00200000U << NVIC_ICER_CLRENA_Pos) /*!< 0x00200000 */
-#define NVIC_ICER_CLRENA_22 (0x00400000U << NVIC_ICER_CLRENA_Pos) /*!< 0x00400000 */
-#define NVIC_ICER_CLRENA_23 (0x00800000U << NVIC_ICER_CLRENA_Pos) /*!< 0x00800000 */
-#define NVIC_ICER_CLRENA_24 (0x01000000U << NVIC_ICER_CLRENA_Pos) /*!< 0x01000000 */
-#define NVIC_ICER_CLRENA_25 (0x02000000U << NVIC_ICER_CLRENA_Pos) /*!< 0x02000000 */
-#define NVIC_ICER_CLRENA_26 (0x04000000U << NVIC_ICER_CLRENA_Pos) /*!< 0x04000000 */
-#define NVIC_ICER_CLRENA_27 (0x08000000U << NVIC_ICER_CLRENA_Pos) /*!< 0x08000000 */
-#define NVIC_ICER_CLRENA_28 (0x10000000U << NVIC_ICER_CLRENA_Pos) /*!< 0x10000000 */
-#define NVIC_ICER_CLRENA_29 (0x20000000U << NVIC_ICER_CLRENA_Pos) /*!< 0x20000000 */
-#define NVIC_ICER_CLRENA_30 (0x40000000U << NVIC_ICER_CLRENA_Pos) /*!< 0x40000000 */
-#define NVIC_ICER_CLRENA_31 (0x80000000U << NVIC_ICER_CLRENA_Pos) /*!< 0x80000000 */
-
-/****************** Bit definition for NVIC_ISPR register *******************/
-#define NVIC_ISPR_SETPEND_Pos (0U)
-#define NVIC_ISPR_SETPEND_Msk (0xFFFFFFFFU << NVIC_ISPR_SETPEND_Pos) /*!< 0xFFFFFFFF */
-#define NVIC_ISPR_SETPEND NVIC_ISPR_SETPEND_Msk /*!< Interrupt set-pending bits */
-#define NVIC_ISPR_SETPEND_0 (0x00000001U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00000001 */
-#define NVIC_ISPR_SETPEND_1 (0x00000002U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00000002 */
-#define NVIC_ISPR_SETPEND_2 (0x00000004U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00000004 */
-#define NVIC_ISPR_SETPEND_3 (0x00000008U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00000008 */
-#define NVIC_ISPR_SETPEND_4 (0x00000010U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00000010 */
-#define NVIC_ISPR_SETPEND_5 (0x00000020U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00000020 */
-#define NVIC_ISPR_SETPEND_6 (0x00000040U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00000040 */
-#define NVIC_ISPR_SETPEND_7 (0x00000080U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00000080 */
-#define NVIC_ISPR_SETPEND_8 (0x00000100U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00000100 */
-#define NVIC_ISPR_SETPEND_9 (0x00000200U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00000200 */
-#define NVIC_ISPR_SETPEND_10 (0x00000400U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00000400 */
-#define NVIC_ISPR_SETPEND_11 (0x00000800U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00000800 */
-#define NVIC_ISPR_SETPEND_12 (0x00001000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00001000 */
-#define NVIC_ISPR_SETPEND_13 (0x00002000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00002000 */
-#define NVIC_ISPR_SETPEND_14 (0x00004000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00004000 */
-#define NVIC_ISPR_SETPEND_15 (0x00008000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00008000 */
-#define NVIC_ISPR_SETPEND_16 (0x00010000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00010000 */
-#define NVIC_ISPR_SETPEND_17 (0x00020000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00020000 */
-#define NVIC_ISPR_SETPEND_18 (0x00040000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00040000 */
-#define NVIC_ISPR_SETPEND_19 (0x00080000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00080000 */
-#define NVIC_ISPR_SETPEND_20 (0x00100000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00100000 */
-#define NVIC_ISPR_SETPEND_21 (0x00200000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00200000 */
-#define NVIC_ISPR_SETPEND_22 (0x00400000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00400000 */
-#define NVIC_ISPR_SETPEND_23 (0x00800000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00800000 */
-#define NVIC_ISPR_SETPEND_24 (0x01000000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x01000000 */
-#define NVIC_ISPR_SETPEND_25 (0x02000000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x02000000 */
-#define NVIC_ISPR_SETPEND_26 (0x04000000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x04000000 */
-#define NVIC_ISPR_SETPEND_27 (0x08000000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x08000000 */
-#define NVIC_ISPR_SETPEND_28 (0x10000000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x10000000 */
-#define NVIC_ISPR_SETPEND_29 (0x20000000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x20000000 */
-#define NVIC_ISPR_SETPEND_30 (0x40000000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x40000000 */
-#define NVIC_ISPR_SETPEND_31 (0x80000000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x80000000 */
-
-/****************** Bit definition for NVIC_ICPR register *******************/
-#define NVIC_ICPR_CLRPEND_Pos (0U)
-#define NVIC_ICPR_CLRPEND_Msk (0xFFFFFFFFU << NVIC_ICPR_CLRPEND_Pos) /*!< 0xFFFFFFFF */
-#define NVIC_ICPR_CLRPEND NVIC_ICPR_CLRPEND_Msk /*!< Interrupt clear-pending bits */
-#define NVIC_ICPR_CLRPEND_0 (0x00000001U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00000001 */
-#define NVIC_ICPR_CLRPEND_1 (0x00000002U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00000002 */
-#define NVIC_ICPR_CLRPEND_2 (0x00000004U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00000004 */
-#define NVIC_ICPR_CLRPEND_3 (0x00000008U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00000008 */
-#define NVIC_ICPR_CLRPEND_4 (0x00000010U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00000010 */
-#define NVIC_ICPR_CLRPEND_5 (0x00000020U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00000020 */
-#define NVIC_ICPR_CLRPEND_6 (0x00000040U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00000040 */
-#define NVIC_ICPR_CLRPEND_7 (0x00000080U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00000080 */
-#define NVIC_ICPR_CLRPEND_8 (0x00000100U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00000100 */
-#define NVIC_ICPR_CLRPEND_9 (0x00000200U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00000200 */
-#define NVIC_ICPR_CLRPEND_10 (0x00000400U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00000400 */
-#define NVIC_ICPR_CLRPEND_11 (0x00000800U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00000800 */
-#define NVIC_ICPR_CLRPEND_12 (0x00001000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00001000 */
-#define NVIC_ICPR_CLRPEND_13 (0x00002000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00002000 */
-#define NVIC_ICPR_CLRPEND_14 (0x00004000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00004000 */
-#define NVIC_ICPR_CLRPEND_15 (0x00008000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00008000 */
-#define NVIC_ICPR_CLRPEND_16 (0x00010000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00010000 */
-#define NVIC_ICPR_CLRPEND_17 (0x00020000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00020000 */
-#define NVIC_ICPR_CLRPEND_18 (0x00040000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00040000 */
-#define NVIC_ICPR_CLRPEND_19 (0x00080000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00080000 */
-#define NVIC_ICPR_CLRPEND_20 (0x00100000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00100000 */
-#define NVIC_ICPR_CLRPEND_21 (0x00200000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00200000 */
-#define NVIC_ICPR_CLRPEND_22 (0x00400000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00400000 */
-#define NVIC_ICPR_CLRPEND_23 (0x00800000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00800000 */
-#define NVIC_ICPR_CLRPEND_24 (0x01000000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x01000000 */
-#define NVIC_ICPR_CLRPEND_25 (0x02000000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x02000000 */
-#define NVIC_ICPR_CLRPEND_26 (0x04000000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x04000000 */
-#define NVIC_ICPR_CLRPEND_27 (0x08000000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x08000000 */
-#define NVIC_ICPR_CLRPEND_28 (0x10000000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x10000000 */
-#define NVIC_ICPR_CLRPEND_29 (0x20000000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x20000000 */
-#define NVIC_ICPR_CLRPEND_30 (0x40000000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x40000000 */
-#define NVIC_ICPR_CLRPEND_31 (0x80000000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x80000000 */
-
-/****************** Bit definition for NVIC_IABR register *******************/
-#define NVIC_IABR_ACTIVE_Pos (0U)
-#define NVIC_IABR_ACTIVE_Msk (0xFFFFFFFFU << NVIC_IABR_ACTIVE_Pos) /*!< 0xFFFFFFFF */
-#define NVIC_IABR_ACTIVE NVIC_IABR_ACTIVE_Msk /*!< Interrupt active flags */
-#define NVIC_IABR_ACTIVE_0 (0x00000001U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00000001 */
-#define NVIC_IABR_ACTIVE_1 (0x00000002U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00000002 */
-#define NVIC_IABR_ACTIVE_2 (0x00000004U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00000004 */
-#define NVIC_IABR_ACTIVE_3 (0x00000008U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00000008 */
-#define NVIC_IABR_ACTIVE_4 (0x00000010U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00000010 */
-#define NVIC_IABR_ACTIVE_5 (0x00000020U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00000020 */
-#define NVIC_IABR_ACTIVE_6 (0x00000040U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00000040 */
-#define NVIC_IABR_ACTIVE_7 (0x00000080U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00000080 */
-#define NVIC_IABR_ACTIVE_8 (0x00000100U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00000100 */
-#define NVIC_IABR_ACTIVE_9 (0x00000200U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00000200 */
-#define NVIC_IABR_ACTIVE_10 (0x00000400U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00000400 */
-#define NVIC_IABR_ACTIVE_11 (0x00000800U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00000800 */
-#define NVIC_IABR_ACTIVE_12 (0x00001000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00001000 */
-#define NVIC_IABR_ACTIVE_13 (0x00002000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00002000 */
-#define NVIC_IABR_ACTIVE_14 (0x00004000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00004000 */
-#define NVIC_IABR_ACTIVE_15 (0x00008000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00008000 */
-#define NVIC_IABR_ACTIVE_16 (0x00010000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00010000 */
-#define NVIC_IABR_ACTIVE_17 (0x00020000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00020000 */
-#define NVIC_IABR_ACTIVE_18 (0x00040000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00040000 */
-#define NVIC_IABR_ACTIVE_19 (0x00080000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00080000 */
-#define NVIC_IABR_ACTIVE_20 (0x00100000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00100000 */
-#define NVIC_IABR_ACTIVE_21 (0x00200000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00200000 */
-#define NVIC_IABR_ACTIVE_22 (0x00400000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00400000 */
-#define NVIC_IABR_ACTIVE_23 (0x00800000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00800000 */
-#define NVIC_IABR_ACTIVE_24 (0x01000000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x01000000 */
-#define NVIC_IABR_ACTIVE_25 (0x02000000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x02000000 */
-#define NVIC_IABR_ACTIVE_26 (0x04000000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x04000000 */
-#define NVIC_IABR_ACTIVE_27 (0x08000000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x08000000 */
-#define NVIC_IABR_ACTIVE_28 (0x10000000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x10000000 */
-#define NVIC_IABR_ACTIVE_29 (0x20000000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x20000000 */
-#define NVIC_IABR_ACTIVE_30 (0x40000000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x40000000 */
-#define NVIC_IABR_ACTIVE_31 (0x80000000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x80000000 */
-
-/****************** Bit definition for NVIC_PRI0 register *******************/
-#define NVIC_IPR0_PRI_0 ((uint32_t)0x000000FF) /*!< Priority of interrupt 0 */
-#define NVIC_IPR0_PRI_1 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 1 */
-#define NVIC_IPR0_PRI_2 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 2 */
-#define NVIC_IPR0_PRI_3 ((uint32_t)0xFF000000) /*!< Priority of interrupt 3 */
-
-/****************** Bit definition for NVIC_PRI1 register *******************/
-#define NVIC_IPR1_PRI_4 ((uint32_t)0x000000FF) /*!< Priority of interrupt 4 */
-#define NVIC_IPR1_PRI_5 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 5 */
-#define NVIC_IPR1_PRI_6 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 6 */
-#define NVIC_IPR1_PRI_7 ((uint32_t)0xFF000000) /*!< Priority of interrupt 7 */
-
-/****************** Bit definition for NVIC_PRI2 register *******************/
-#define NVIC_IPR2_PRI_8 ((uint32_t)0x000000FF) /*!< Priority of interrupt 8 */
-#define NVIC_IPR2_PRI_9 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 9 */
-#define NVIC_IPR2_PRI_10 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 10 */
-#define NVIC_IPR2_PRI_11 ((uint32_t)0xFF000000) /*!< Priority of interrupt 11 */
-
-/****************** Bit definition for NVIC_PRI3 register *******************/
-#define NVIC_IPR3_PRI_12 ((uint32_t)0x000000FF) /*!< Priority of interrupt 12 */
-#define NVIC_IPR3_PRI_13 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 13 */
-#define NVIC_IPR3_PRI_14 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 14 */
-#define NVIC_IPR3_PRI_15 ((uint32_t)0xFF000000) /*!< Priority of interrupt 15 */
-
-/****************** Bit definition for NVIC_PRI4 register *******************/
-#define NVIC_IPR4_PRI_16 ((uint32_t)0x000000FF) /*!< Priority of interrupt 16 */
-#define NVIC_IPR4_PRI_17 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 17 */
-#define NVIC_IPR4_PRI_18 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 18 */
-#define NVIC_IPR4_PRI_19 ((uint32_t)0xFF000000) /*!< Priority of interrupt 19 */
-
-/****************** Bit definition for NVIC_PRI5 register *******************/
-#define NVIC_IPR5_PRI_20 ((uint32_t)0x000000FF) /*!< Priority of interrupt 20 */
-#define NVIC_IPR5_PRI_21 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 21 */
-#define NVIC_IPR5_PRI_22 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 22 */
-#define NVIC_IPR5_PRI_23 ((uint32_t)0xFF000000) /*!< Priority of interrupt 23 */
-
-/****************** Bit definition for NVIC_PRI6 register *******************/
-#define NVIC_IPR6_PRI_24 ((uint32_t)0x000000FF) /*!< Priority of interrupt 24 */
-#define NVIC_IPR6_PRI_25 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 25 */
-#define NVIC_IPR6_PRI_26 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 26 */
-#define NVIC_IPR6_PRI_27 ((uint32_t)0xFF000000) /*!< Priority of interrupt 27 */
-
-/****************** Bit definition for NVIC_PRI7 register *******************/
-#define NVIC_IPR7_PRI_28 ((uint32_t)0x000000FF) /*!< Priority of interrupt 28 */
-#define NVIC_IPR7_PRI_29 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 29 */
-#define NVIC_IPR7_PRI_30 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 30 */
-#define NVIC_IPR7_PRI_31 ((uint32_t)0xFF000000) /*!< Priority of interrupt 31 */
-
-/****************** Bit definition for SCB_CPUID register *******************/
-#define SCB_CPUID_REVISION ((uint32_t)0x0000000F) /*!< Implementation defined revision number */
-#define SCB_CPUID_PARTNO ((uint32_t)0x0000FFF0) /*!< Number of processor within family */
-#define SCB_CPUID_Constant ((uint32_t)0x000F0000) /*!< Reads as 0x0F */
-#define SCB_CPUID_VARIANT ((uint32_t)0x00F00000) /*!< Implementation defined variant number */
-#define SCB_CPUID_IMPLEMENTER ((uint32_t)0xFF000000) /*!< Implementer code. ARM is 0x41 */
-
-/******************* Bit definition for SCB_ICSR register *******************/
-#define SCB_ICSR_VECTACTIVE ((uint32_t)0x000001FF) /*!< Active ISR number field */
-#define SCB_ICSR_RETTOBASE ((uint32_t)0x00000800) /*!< All active exceptions minus the IPSR_current_exception yields the empty set */
-#define SCB_ICSR_VECTPENDING ((uint32_t)0x003FF000) /*!< Pending ISR number field */
-#define SCB_ICSR_ISRPENDING ((uint32_t)0x00400000) /*!< Interrupt pending flag */
-#define SCB_ICSR_ISRPREEMPT ((uint32_t)0x00800000) /*!< It indicates that a pending interrupt becomes active in the next running cycle */
-#define SCB_ICSR_PENDSTCLR ((uint32_t)0x02000000) /*!< Clear pending SysTick bit */
-#define SCB_ICSR_PENDSTSET ((uint32_t)0x04000000) /*!< Set pending SysTick bit */
-#define SCB_ICSR_PENDSVCLR ((uint32_t)0x08000000) /*!< Clear pending pendSV bit */
-#define SCB_ICSR_PENDSVSET ((uint32_t)0x10000000) /*!< Set pending pendSV bit */
-#define SCB_ICSR_NMIPENDSET ((uint32_t)0x80000000) /*!< Set pending NMI bit */
-
-/******************* Bit definition for SCB_VTOR register *******************/
-#define SCB_VTOR_TBLOFF ((uint32_t)0x1FFFFF80) /*!< Vector table base offset field */
-#define SCB_VTOR_TBLBASE ((uint32_t)0x20000000) /*!< Table base in code(0) or RAM(1) */
-
-/*!<***************** Bit definition for SCB_AIRCR register *******************/
-#define SCB_AIRCR_VECTRESET ((uint32_t)0x00000001) /*!< System Reset bit */
-#define SCB_AIRCR_VECTCLRACTIVE ((uint32_t)0x00000002) /*!< Clear active vector bit */
-#define SCB_AIRCR_SYSRESETREQ ((uint32_t)0x00000004) /*!< Requests chip control logic to generate a reset */
-
-#define SCB_AIRCR_PRIGROUP ((uint32_t)0x00000700) /*!< PRIGROUP[2:0] bits (Priority group) */
-#define SCB_AIRCR_PRIGROUP_0 ((uint32_t)0x00000100) /*!< Bit 0 */
-#define SCB_AIRCR_PRIGROUP_1 ((uint32_t)0x00000200) /*!< Bit 1 */
-#define SCB_AIRCR_PRIGROUP_2 ((uint32_t)0x00000400) /*!< Bit 2 */
-
-/* prority group configuration */
-#define SCB_AIRCR_PRIGROUP0 ((uint32_t)0x00000000) /*!< Priority group=0 (7 bits of pre-emption priority, 1 bit of subpriority) */
-#define SCB_AIRCR_PRIGROUP1 ((uint32_t)0x00000100) /*!< Priority group=1 (6 bits of pre-emption priority, 2 bits of subpriority) */
-#define SCB_AIRCR_PRIGROUP2 ((uint32_t)0x00000200) /*!< Priority group=2 (5 bits of pre-emption priority, 3 bits of subpriority) */
-#define SCB_AIRCR_PRIGROUP3 ((uint32_t)0x00000300) /*!< Priority group=3 (4 bits of pre-emption priority, 4 bits of subpriority) */
-#define SCB_AIRCR_PRIGROUP4 ((uint32_t)0x00000400) /*!< Priority group=4 (3 bits of pre-emption priority, 5 bits of subpriority) */
-#define SCB_AIRCR_PRIGROUP5 ((uint32_t)0x00000500) /*!< Priority group=5 (2 bits of pre-emption priority, 6 bits of subpriority) */
-#define SCB_AIRCR_PRIGROUP6 ((uint32_t)0x00000600) /*!< Priority group=6 (1 bit of pre-emption priority, 7 bits of subpriority) */
-#define SCB_AIRCR_PRIGROUP7 ((uint32_t)0x00000700) /*!< Priority group=7 (no pre-emption priority, 8 bits of subpriority) */
-
-#define SCB_AIRCR_ENDIANESS ((uint32_t)0x00008000) /*!< Data endianness bit */
-#define SCB_AIRCR_VECTKEY ((uint32_t)0xFFFF0000) /*!< Register key (VECTKEY) - Reads as 0xFA05 (VECTKEYSTAT) */
-
-/******************* Bit definition for SCB_SCR register ********************/
-#define SCB_SCR_SLEEPONEXIT ((uint32_t)0x00000002) /*!< Sleep on exit bit */
-#define SCB_SCR_SLEEPDEEP ((uint32_t)0x00000004) /*!< Sleep deep bit */
-#define SCB_SCR_SEVONPEND ((uint32_t)0x00000010) /*!< Wake up from WFE */
-
-/******************** Bit definition for SCB_CCR register *******************/
-#define SCB_CCR_NONBASETHRDENA ((uint32_t)0x00000001) /*!< Thread mode can be entered from any level in Handler mode by controlled return value */
-#define SCB_CCR_USERSETMPEND ((uint32_t)0x00000002) /*!< Enables user code to write the Software Trigger Interrupt register to trigger (pend) a Main exception */
-#define SCB_CCR_UNALIGN_TRP ((uint32_t)0x00000008) /*!< Trap for unaligned access */
-#define SCB_CCR_DIV_0_TRP ((uint32_t)0x00000010) /*!< Trap on Divide by 0 */
-#define SCB_CCR_BFHFNMIGN ((uint32_t)0x00000100) /*!< Handlers running at priority -1 and -2 */
-#define SCB_CCR_STKALIGN ((uint32_t)0x00000200) /*!< On exception entry, the SP used prior to the exception is adjusted to be 8-byte aligned */
-
-/******************* Bit definition for SCB_SHPR register ********************/
-#define SCB_SHPR_PRI_N_Pos (0U)
-#define SCB_SHPR_PRI_N_Msk (0xFFU << SCB_SHPR_PRI_N_Pos) /*!< 0x000000FF */
-#define SCB_SHPR_PRI_N SCB_SHPR_PRI_N_Msk /*!< Priority of system handler 4,8, and 12. Mem Manage, reserved and Debug Monitor */
-#define SCB_SHPR_PRI_N1_Pos (8U)
-#define SCB_SHPR_PRI_N1_Msk (0xFFU << SCB_SHPR_PRI_N1_Pos) /*!< 0x0000FF00 */
-#define SCB_SHPR_PRI_N1 SCB_SHPR_PRI_N1_Msk /*!< Priority of system handler 5,9, and 13. Bus Fault, reserved and reserved */
-#define SCB_SHPR_PRI_N2_Pos (16U)
-#define SCB_SHPR_PRI_N2_Msk (0xFFU << SCB_SHPR_PRI_N2_Pos) /*!< 0x00FF0000 */
-#define SCB_SHPR_PRI_N2 SCB_SHPR_PRI_N2_Msk /*!< Priority of system handler 6,10, and 14. Usage Fault, reserved and PendSV */
-#define SCB_SHPR_PRI_N3_Pos (24U)
-#define SCB_SHPR_PRI_N3_Msk (0xFFU << SCB_SHPR_PRI_N3_Pos) /*!< 0xFF000000 */
-#define SCB_SHPR_PRI_N3 SCB_SHPR_PRI_N3_Msk /*!< Priority of system handler 7,11, and 15. Reserved, SVCall and SysTick */
-
-/****************** Bit definition for SCB_SHCSR register *******************/
-#define SCB_SHCSR_MEMFAULTACT ((uint32_t)0x00000001) /*!< MemManage is active */
-#define SCB_SHCSR_BUSFAULTACT ((uint32_t)0x00000002) /*!< BusFault is active */
-#define SCB_SHCSR_USGFAULTACT ((uint32_t)0x00000008) /*!< UsageFault is active */
-#define SCB_SHCSR_SVCALLACT ((uint32_t)0x00000080) /*!< SVCall is active */
-#define SCB_SHCSR_MONITORACT ((uint32_t)0x00000100) /*!< Monitor is active */
-#define SCB_SHCSR_PENDSVACT ((uint32_t)0x00000400) /*!< PendSV is active */
-#define SCB_SHCSR_SYSTICKACT ((uint32_t)0x00000800) /*!< SysTick is active */
-#define SCB_SHCSR_USGFAULTPENDED ((uint32_t)0x00001000) /*!< Usage Fault is pended */
-#define SCB_SHCSR_MEMFAULTPENDED ((uint32_t)0x00002000) /*!< MemManage is pended */
-#define SCB_SHCSR_BUSFAULTPENDED ((uint32_t)0x00004000) /*!< Bus Fault is pended */
-#define SCB_SHCSR_SVCALLPENDED ((uint32_t)0x00008000) /*!< SVCall is pended */
-#define SCB_SHCSR_MEMFAULTENA ((uint32_t)0x00010000) /*!< MemManage enable */
-#define SCB_SHCSR_BUSFAULTENA ((uint32_t)0x00020000) /*!< Bus Fault enable */
-#define SCB_SHCSR_USGFAULTENA ((uint32_t)0x00040000) /*!< UsageFault enable */
-
-/******************* Bit definition for SCB_CFSR register *******************/
-/*!< MFSR */
-#define SCB_CFSR_IACCVIOL_Pos (0U)
-#define SCB_CFSR_IACCVIOL_Msk (0x1U << SCB_CFSR_IACCVIOL_Pos) /*!< 0x00000001 */
-#define SCB_CFSR_IACCVIOL SCB_CFSR_IACCVIOL_Msk /*!< Instruction access violation */
-#define SCB_CFSR_DACCVIOL_Pos (1U)
-#define SCB_CFSR_DACCVIOL_Msk (0x1U << SCB_CFSR_DACCVIOL_Pos) /*!< 0x00000002 */
-#define SCB_CFSR_DACCVIOL SCB_CFSR_DACCVIOL_Msk /*!< Data access violation */
-#define SCB_CFSR_MUNSTKERR_Pos (3U)
-#define SCB_CFSR_MUNSTKERR_Msk (0x1U << SCB_CFSR_MUNSTKERR_Pos) /*!< 0x00000008 */
-#define SCB_CFSR_MUNSTKERR SCB_CFSR_MUNSTKERR_Msk /*!< Unstacking error */
-#define SCB_CFSR_MSTKERR_Pos (4U)
-#define SCB_CFSR_MSTKERR_Msk (0x1U << SCB_CFSR_MSTKERR_Pos) /*!< 0x00000010 */
-#define SCB_CFSR_MSTKERR SCB_CFSR_MSTKERR_Msk /*!< Stacking error */
-#define SCB_CFSR_MMARVALID_Pos (7U)
-#define SCB_CFSR_MMARVALID_Msk (0x1U << SCB_CFSR_MMARVALID_Pos) /*!< 0x00000080 */
-#define SCB_CFSR_MMARVALID SCB_CFSR_MMARVALID_Msk /*!< Memory Manage Address Register address valid flag */
-/*!< BFSR */
-#define SCB_CFSR_IBUSERR_Pos (8U)
-#define SCB_CFSR_IBUSERR_Msk (0x1U << SCB_CFSR_IBUSERR_Pos) /*!< 0x00000100 */
-#define SCB_CFSR_IBUSERR SCB_CFSR_IBUSERR_Msk /*!< Instruction bus error flag */
-#define SCB_CFSR_PRECISERR_Pos (9U)
-#define SCB_CFSR_PRECISERR_Msk (0x1U << SCB_CFSR_PRECISERR_Pos) /*!< 0x00000200 */
-#define SCB_CFSR_PRECISERR SCB_CFSR_PRECISERR_Msk /*!< Precise data bus error */
-#define SCB_CFSR_IMPRECISERR_Pos (10U)
-#define SCB_CFSR_IMPRECISERR_Msk (0x1U << SCB_CFSR_IMPRECISERR_Pos) /*!< 0x00000400 */
-#define SCB_CFSR_IMPRECISERR SCB_CFSR_IMPRECISERR_Msk /*!< Imprecise data bus error */
-#define SCB_CFSR_UNSTKERR_Pos (11U)
-#define SCB_CFSR_UNSTKERR_Msk (0x1U << SCB_CFSR_UNSTKERR_Pos) /*!< 0x00000800 */
-#define SCB_CFSR_UNSTKERR SCB_CFSR_UNSTKERR_Msk /*!< Unstacking error */
-#define SCB_CFSR_STKERR_Pos (12U)
-#define SCB_CFSR_STKERR_Msk (0x1U << SCB_CFSR_STKERR_Pos) /*!< 0x00001000 */
-#define SCB_CFSR_STKERR SCB_CFSR_STKERR_Msk /*!< Stacking error */
-#define SCB_CFSR_BFARVALID_Pos (15U)
-#define SCB_CFSR_BFARVALID_Msk (0x1U << SCB_CFSR_BFARVALID_Pos) /*!< 0x00008000 */
-#define SCB_CFSR_BFARVALID SCB_CFSR_BFARVALID_Msk /*!< Bus Fault Address Register address valid flag */
-/*!< UFSR */
-#define SCB_CFSR_UNDEFINSTR_Pos (16U)
-#define SCB_CFSR_UNDEFINSTR_Msk (0x1U << SCB_CFSR_UNDEFINSTR_Pos) /*!< 0x00010000 */
-#define SCB_CFSR_UNDEFINSTR SCB_CFSR_UNDEFINSTR_Msk /*!< The processor attempt to execute an undefined instruction */
-#define SCB_CFSR_INVSTATE_Pos (17U)
-#define SCB_CFSR_INVSTATE_Msk (0x1U << SCB_CFSR_INVSTATE_Pos) /*!< 0x00020000 */
-#define SCB_CFSR_INVSTATE SCB_CFSR_INVSTATE_Msk /*!< Invalid combination of EPSR and instruction */
-#define SCB_CFSR_INVPC_Pos (18U)
-#define SCB_CFSR_INVPC_Msk (0x1U << SCB_CFSR_INVPC_Pos) /*!< 0x00040000 */
-#define SCB_CFSR_INVPC SCB_CFSR_INVPC_Msk /*!< Attempt to load EXC_RETURN into pc illegally */
-#define SCB_CFSR_NOCP_Pos (19U)
-#define SCB_CFSR_NOCP_Msk (0x1U << SCB_CFSR_NOCP_Pos) /*!< 0x00080000 */
-#define SCB_CFSR_NOCP SCB_CFSR_NOCP_Msk /*!< Attempt to use a coprocessor instruction */
-#define SCB_CFSR_UNALIGNED_Pos (24U)
-#define SCB_CFSR_UNALIGNED_Msk (0x1U << SCB_CFSR_UNALIGNED_Pos) /*!< 0x01000000 */
-#define SCB_CFSR_UNALIGNED SCB_CFSR_UNALIGNED_Msk /*!< Fault occurs when there is an attempt to make an unaligned memory access */
-#define SCB_CFSR_DIVBYZERO_Pos (25U)
-#define SCB_CFSR_DIVBYZERO_Msk (0x1U << SCB_CFSR_DIVBYZERO_Pos) /*!< 0x02000000 */
-#define SCB_CFSR_DIVBYZERO SCB_CFSR_DIVBYZERO_Msk /*!< Fault occurs when SDIV or DIV instruction is used with a divisor of 0 */
-
-/******************* Bit definition for SCB_HFSR register *******************/
-#define SCB_HFSR_VECTTBL ((uint32_t)0x00000002) /*!< Fault occurs because of vector table read on exception processing */
-#define SCB_HFSR_FORCED ((uint32_t)0x40000000) /*!< Hard Fault activated when a configurable Fault was received and cannot activate */
-#define SCB_HFSR_DEBUGEVT ((uint32_t)0x80000000) /*!< Fault related to debug */
-
-/******************* Bit definition for SCB_DFSR register *******************/
-#define SCB_DFSR_HALTED ((uint32_t)0x00000001) /*!< Halt request flag */
-#define SCB_DFSR_BKPT ((uint32_t)0x00000002) /*!< BKPT flag */
-#define SCB_DFSR_DWTTRAP ((uint32_t)0x00000004) /*!< Data Watchpoint and Trace (DWT) flag */
-#define SCB_DFSR_VCATCH ((uint32_t)0x00000008) /*!< Vector catch flag */
-#define SCB_DFSR_EXTERNAL ((uint32_t)0x00000010) /*!< External debug request flag */
-
-/******************* Bit definition for SCB_MMFAR register ******************/
-#define SCB_MMFAR_ADDRESS_Pos (0U)
-#define SCB_MMFAR_ADDRESS_Msk (0xFFFFFFFFU << SCB_MMFAR_ADDRESS_Pos) /*!< 0xFFFFFFFF */
-#define SCB_MMFAR_ADDRESS SCB_MMFAR_ADDRESS_Msk /*!< Mem Manage fault address field */
-
-/******************* Bit definition for SCB_BFAR register *******************/
-#define SCB_BFAR_ADDRESS_Pos (0U)
-#define SCB_BFAR_ADDRESS_Msk (0xFFFFFFFFU << SCB_BFAR_ADDRESS_Pos) /*!< 0xFFFFFFFF */
-#define SCB_BFAR_ADDRESS SCB_BFAR_ADDRESS_Msk /*!< Bus fault address field */
-
-/******************* Bit definition for SCB_afsr register *******************/
-#define SCB_AFSR_IMPDEF_Pos (0U)
-#define SCB_AFSR_IMPDEF_Msk (0xFFFFFFFFU << SCB_AFSR_IMPDEF_Pos) /*!< 0xFFFFFFFF */
-#define SCB_AFSR_IMPDEF SCB_AFSR_IMPDEF_Msk /*!< Implementation defined */
-
-/******************************************************************************/
-/* */
-/* External Interrupt/Event Controller */
-/* */
-/******************************************************************************/
-
-/******************* Bit definition for EXTI_IMR register *******************/
-#define EXTI_IMR_MR0_Pos (0U)
-#define EXTI_IMR_MR0_Msk (0x1U << EXTI_IMR_MR0_Pos) /*!< 0x00000001 */
-#define EXTI_IMR_MR0 EXTI_IMR_MR0_Msk /*!< Interrupt Mask on line 0 */
-#define EXTI_IMR_MR1_Pos (1U)
-#define EXTI_IMR_MR1_Msk (0x1U << EXTI_IMR_MR1_Pos) /*!< 0x00000002 */
-#define EXTI_IMR_MR1 EXTI_IMR_MR1_Msk /*!< Interrupt Mask on line 1 */
-#define EXTI_IMR_MR2_Pos (2U)
-#define EXTI_IMR_MR2_Msk (0x1U << EXTI_IMR_MR2_Pos) /*!< 0x00000004 */
-#define EXTI_IMR_MR2 EXTI_IMR_MR2_Msk /*!< Interrupt Mask on line 2 */
-#define EXTI_IMR_MR3_Pos (3U)
-#define EXTI_IMR_MR3_Msk (0x1U << EXTI_IMR_MR3_Pos) /*!< 0x00000008 */
-#define EXTI_IMR_MR3 EXTI_IMR_MR3_Msk /*!< Interrupt Mask on line 3 */
-#define EXTI_IMR_MR4_Pos (4U)
-#define EXTI_IMR_MR4_Msk (0x1U << EXTI_IMR_MR4_Pos) /*!< 0x00000010 */
-#define EXTI_IMR_MR4 EXTI_IMR_MR4_Msk /*!< Interrupt Mask on line 4 */
-#define EXTI_IMR_MR5_Pos (5U)
-#define EXTI_IMR_MR5_Msk (0x1U << EXTI_IMR_MR5_Pos) /*!< 0x00000020 */
-#define EXTI_IMR_MR5 EXTI_IMR_MR5_Msk /*!< Interrupt Mask on line 5 */
-#define EXTI_IMR_MR6_Pos (6U)
-#define EXTI_IMR_MR6_Msk (0x1U << EXTI_IMR_MR6_Pos) /*!< 0x00000040 */
-#define EXTI_IMR_MR6 EXTI_IMR_MR6_Msk /*!< Interrupt Mask on line 6 */
-#define EXTI_IMR_MR7_Pos (7U)
-#define EXTI_IMR_MR7_Msk (0x1U << EXTI_IMR_MR7_Pos) /*!< 0x00000080 */
-#define EXTI_IMR_MR7 EXTI_IMR_MR7_Msk /*!< Interrupt Mask on line 7 */
-#define EXTI_IMR_MR8_Pos (8U)
-#define EXTI_IMR_MR8_Msk (0x1U << EXTI_IMR_MR8_Pos) /*!< 0x00000100 */
-#define EXTI_IMR_MR8 EXTI_IMR_MR8_Msk /*!< Interrupt Mask on line 8 */
-#define EXTI_IMR_MR9_Pos (9U)
-#define EXTI_IMR_MR9_Msk (0x1U << EXTI_IMR_MR9_Pos) /*!< 0x00000200 */
-#define EXTI_IMR_MR9 EXTI_IMR_MR9_Msk /*!< Interrupt Mask on line 9 */
-#define EXTI_IMR_MR10_Pos (10U)
-#define EXTI_IMR_MR10_Msk (0x1U << EXTI_IMR_MR10_Pos) /*!< 0x00000400 */
-#define EXTI_IMR_MR10 EXTI_IMR_MR10_Msk /*!< Interrupt Mask on line 10 */
-#define EXTI_IMR_MR11_Pos (11U)
-#define EXTI_IMR_MR11_Msk (0x1U << EXTI_IMR_MR11_Pos) /*!< 0x00000800 */
-#define EXTI_IMR_MR11 EXTI_IMR_MR11_Msk /*!< Interrupt Mask on line 11 */
-#define EXTI_IMR_MR12_Pos (12U)
-#define EXTI_IMR_MR12_Msk (0x1U << EXTI_IMR_MR12_Pos) /*!< 0x00001000 */
-#define EXTI_IMR_MR12 EXTI_IMR_MR12_Msk /*!< Interrupt Mask on line 12 */
-#define EXTI_IMR_MR13_Pos (13U)
-#define EXTI_IMR_MR13_Msk (0x1U << EXTI_IMR_MR13_Pos) /*!< 0x00002000 */
-#define EXTI_IMR_MR13 EXTI_IMR_MR13_Msk /*!< Interrupt Mask on line 13 */
-#define EXTI_IMR_MR14_Pos (14U)
-#define EXTI_IMR_MR14_Msk (0x1U << EXTI_IMR_MR14_Pos) /*!< 0x00004000 */
-#define EXTI_IMR_MR14 EXTI_IMR_MR14_Msk /*!< Interrupt Mask on line 14 */
-#define EXTI_IMR_MR15_Pos (15U)
-#define EXTI_IMR_MR15_Msk (0x1U << EXTI_IMR_MR15_Pos) /*!< 0x00008000 */
-#define EXTI_IMR_MR15 EXTI_IMR_MR15_Msk /*!< Interrupt Mask on line 15 */
-#define EXTI_IMR_MR16_Pos (16U)
-#define EXTI_IMR_MR16_Msk (0x1U << EXTI_IMR_MR16_Pos) /*!< 0x00010000 */
-#define EXTI_IMR_MR16 EXTI_IMR_MR16_Msk /*!< Interrupt Mask on line 16 */
-#define EXTI_IMR_MR17_Pos (17U)
-#define EXTI_IMR_MR17_Msk (0x1U << EXTI_IMR_MR17_Pos) /*!< 0x00020000 */
-#define EXTI_IMR_MR17 EXTI_IMR_MR17_Msk /*!< Interrupt Mask on line 17 */
-#define EXTI_IMR_MR18_Pos (18U)
-#define EXTI_IMR_MR18_Msk (0x1U << EXTI_IMR_MR18_Pos) /*!< 0x00040000 */
-#define EXTI_IMR_MR18 EXTI_IMR_MR18_Msk /*!< Interrupt Mask on line 18 */
-#define EXTI_IMR_MR19_Pos (19U)
-#define EXTI_IMR_MR19_Msk (0x1U << EXTI_IMR_MR19_Pos) /*!< 0x00080000 */
-#define EXTI_IMR_MR19 EXTI_IMR_MR19_Msk /*!< Interrupt Mask on line 19 */
-
-/* References Defines */
-#define EXTI_IMR_IM0 EXTI_IMR_MR0
-#define EXTI_IMR_IM1 EXTI_IMR_MR1
-#define EXTI_IMR_IM2 EXTI_IMR_MR2
-#define EXTI_IMR_IM3 EXTI_IMR_MR3
-#define EXTI_IMR_IM4 EXTI_IMR_MR4
-#define EXTI_IMR_IM5 EXTI_IMR_MR5
-#define EXTI_IMR_IM6 EXTI_IMR_MR6
-#define EXTI_IMR_IM7 EXTI_IMR_MR7
-#define EXTI_IMR_IM8 EXTI_IMR_MR8
-#define EXTI_IMR_IM9 EXTI_IMR_MR9
-#define EXTI_IMR_IM10 EXTI_IMR_MR10
-#define EXTI_IMR_IM11 EXTI_IMR_MR11
-#define EXTI_IMR_IM12 EXTI_IMR_MR12
-#define EXTI_IMR_IM13 EXTI_IMR_MR13
-#define EXTI_IMR_IM14 EXTI_IMR_MR14
-#define EXTI_IMR_IM15 EXTI_IMR_MR15
-#define EXTI_IMR_IM16 EXTI_IMR_MR16
-#define EXTI_IMR_IM17 EXTI_IMR_MR17
-#define EXTI_IMR_IM18 EXTI_IMR_MR18
-#define EXTI_IMR_IM19 EXTI_IMR_MR19
-
-/******************* Bit definition for EXTI_EMR register *******************/
-#define EXTI_EMR_MR0_Pos (0U)
-#define EXTI_EMR_MR0_Msk (0x1U << EXTI_EMR_MR0_Pos) /*!< 0x00000001 */
-#define EXTI_EMR_MR0 EXTI_EMR_MR0_Msk /*!< Event Mask on line 0 */
-#define EXTI_EMR_MR1_Pos (1U)
-#define EXTI_EMR_MR1_Msk (0x1U << EXTI_EMR_MR1_Pos) /*!< 0x00000002 */
-#define EXTI_EMR_MR1 EXTI_EMR_MR1_Msk /*!< Event Mask on line 1 */
-#define EXTI_EMR_MR2_Pos (2U)
-#define EXTI_EMR_MR2_Msk (0x1U << EXTI_EMR_MR2_Pos) /*!< 0x00000004 */
-#define EXTI_EMR_MR2 EXTI_EMR_MR2_Msk /*!< Event Mask on line 2 */
-#define EXTI_EMR_MR3_Pos (3U)
-#define EXTI_EMR_MR3_Msk (0x1U << EXTI_EMR_MR3_Pos) /*!< 0x00000008 */
-#define EXTI_EMR_MR3 EXTI_EMR_MR3_Msk /*!< Event Mask on line 3 */
-#define EXTI_EMR_MR4_Pos (4U)
-#define EXTI_EMR_MR4_Msk (0x1U << EXTI_EMR_MR4_Pos) /*!< 0x00000010 */
-#define EXTI_EMR_MR4 EXTI_EMR_MR4_Msk /*!< Event Mask on line 4 */
-#define EXTI_EMR_MR5_Pos (5U)
-#define EXTI_EMR_MR5_Msk (0x1U << EXTI_EMR_MR5_Pos) /*!< 0x00000020 */
-#define EXTI_EMR_MR5 EXTI_EMR_MR5_Msk /*!< Event Mask on line 5 */
-#define EXTI_EMR_MR6_Pos (6U)
-#define EXTI_EMR_MR6_Msk (0x1U << EXTI_EMR_MR6_Pos) /*!< 0x00000040 */
-#define EXTI_EMR_MR6 EXTI_EMR_MR6_Msk /*!< Event Mask on line 6 */
-#define EXTI_EMR_MR7_Pos (7U)
-#define EXTI_EMR_MR7_Msk (0x1U << EXTI_EMR_MR7_Pos) /*!< 0x00000080 */
-#define EXTI_EMR_MR7 EXTI_EMR_MR7_Msk /*!< Event Mask on line 7 */
-#define EXTI_EMR_MR8_Pos (8U)
-#define EXTI_EMR_MR8_Msk (0x1U << EXTI_EMR_MR8_Pos) /*!< 0x00000100 */
-#define EXTI_EMR_MR8 EXTI_EMR_MR8_Msk /*!< Event Mask on line 8 */
-#define EXTI_EMR_MR9_Pos (9U)
-#define EXTI_EMR_MR9_Msk (0x1U << EXTI_EMR_MR9_Pos) /*!< 0x00000200 */
-#define EXTI_EMR_MR9 EXTI_EMR_MR9_Msk /*!< Event Mask on line 9 */
-#define EXTI_EMR_MR10_Pos (10U)
-#define EXTI_EMR_MR10_Msk (0x1U << EXTI_EMR_MR10_Pos) /*!< 0x00000400 */
-#define EXTI_EMR_MR10 EXTI_EMR_MR10_Msk /*!< Event Mask on line 10 */
-#define EXTI_EMR_MR11_Pos (11U)
-#define EXTI_EMR_MR11_Msk (0x1U << EXTI_EMR_MR11_Pos) /*!< 0x00000800 */
-#define EXTI_EMR_MR11 EXTI_EMR_MR11_Msk /*!< Event Mask on line 11 */
-#define EXTI_EMR_MR12_Pos (12U)
-#define EXTI_EMR_MR12_Msk (0x1U << EXTI_EMR_MR12_Pos) /*!< 0x00001000 */
-#define EXTI_EMR_MR12 EXTI_EMR_MR12_Msk /*!< Event Mask on line 12 */
-#define EXTI_EMR_MR13_Pos (13U)
-#define EXTI_EMR_MR13_Msk (0x1U << EXTI_EMR_MR13_Pos) /*!< 0x00002000 */
-#define EXTI_EMR_MR13 EXTI_EMR_MR13_Msk /*!< Event Mask on line 13 */
-#define EXTI_EMR_MR14_Pos (14U)
-#define EXTI_EMR_MR14_Msk (0x1U << EXTI_EMR_MR14_Pos) /*!< 0x00004000 */
-#define EXTI_EMR_MR14 EXTI_EMR_MR14_Msk /*!< Event Mask on line 14 */
-#define EXTI_EMR_MR15_Pos (15U)
-#define EXTI_EMR_MR15_Msk (0x1U << EXTI_EMR_MR15_Pos) /*!< 0x00008000 */
-#define EXTI_EMR_MR15 EXTI_EMR_MR15_Msk /*!< Event Mask on line 15 */
-#define EXTI_EMR_MR16_Pos (16U)
-#define EXTI_EMR_MR16_Msk (0x1U << EXTI_EMR_MR16_Pos) /*!< 0x00010000 */
-#define EXTI_EMR_MR16 EXTI_EMR_MR16_Msk /*!< Event Mask on line 16 */
-#define EXTI_EMR_MR17_Pos (17U)
-#define EXTI_EMR_MR17_Msk (0x1U << EXTI_EMR_MR17_Pos) /*!< 0x00020000 */
-#define EXTI_EMR_MR17 EXTI_EMR_MR17_Msk /*!< Event Mask on line 17 */
-#define EXTI_EMR_MR18_Pos (18U)
-#define EXTI_EMR_MR18_Msk (0x1U << EXTI_EMR_MR18_Pos) /*!< 0x00040000 */
-#define EXTI_EMR_MR18 EXTI_EMR_MR18_Msk /*!< Event Mask on line 18 */
-#define EXTI_EMR_MR19_Pos (19U)
-#define EXTI_EMR_MR19_Msk (0x1U << EXTI_EMR_MR19_Pos) /*!< 0x00080000 */
-#define EXTI_EMR_MR19 EXTI_EMR_MR19_Msk /*!< Event Mask on line 19 */
-
-/* References Defines */
-#define EXTI_EMR_EM0 EXTI_EMR_MR0
-#define EXTI_EMR_EM1 EXTI_EMR_MR1
-#define EXTI_EMR_EM2 EXTI_EMR_MR2
-#define EXTI_EMR_EM3 EXTI_EMR_MR3
-#define EXTI_EMR_EM4 EXTI_EMR_MR4
-#define EXTI_EMR_EM5 EXTI_EMR_MR5
-#define EXTI_EMR_EM6 EXTI_EMR_MR6
-#define EXTI_EMR_EM7 EXTI_EMR_MR7
-#define EXTI_EMR_EM8 EXTI_EMR_MR8
-#define EXTI_EMR_EM9 EXTI_EMR_MR9
-#define EXTI_EMR_EM10 EXTI_EMR_MR10
-#define EXTI_EMR_EM11 EXTI_EMR_MR11
-#define EXTI_EMR_EM12 EXTI_EMR_MR12
-#define EXTI_EMR_EM13 EXTI_EMR_MR13
-#define EXTI_EMR_EM14 EXTI_EMR_MR14
-#define EXTI_EMR_EM15 EXTI_EMR_MR15
-#define EXTI_EMR_EM16 EXTI_EMR_MR16
-#define EXTI_EMR_EM17 EXTI_EMR_MR17
-#define EXTI_EMR_EM18 EXTI_EMR_MR18
-#define EXTI_EMR_EM19 EXTI_EMR_MR19
-
-/****************** Bit definition for EXTI_RTSR register *******************/
-#define EXTI_RTSR_TR0_Pos (0U)
-#define EXTI_RTSR_TR0_Msk (0x1U << EXTI_RTSR_TR0_Pos) /*!< 0x00000001 */
-#define EXTI_RTSR_TR0 EXTI_RTSR_TR0_Msk /*!< Rising trigger event configuration bit of line 0 */
-#define EXTI_RTSR_TR1_Pos (1U)
-#define EXTI_RTSR_TR1_Msk (0x1U << EXTI_RTSR_TR1_Pos) /*!< 0x00000002 */
-#define EXTI_RTSR_TR1 EXTI_RTSR_TR1_Msk /*!< Rising trigger event configuration bit of line 1 */
-#define EXTI_RTSR_TR2_Pos (2U)
-#define EXTI_RTSR_TR2_Msk (0x1U << EXTI_RTSR_TR2_Pos) /*!< 0x00000004 */
-#define EXTI_RTSR_TR2 EXTI_RTSR_TR2_Msk /*!< Rising trigger event configuration bit of line 2 */
-#define EXTI_RTSR_TR3_Pos (3U)
-#define EXTI_RTSR_TR3_Msk (0x1U << EXTI_RTSR_TR3_Pos) /*!< 0x00000008 */
-#define EXTI_RTSR_TR3 EXTI_RTSR_TR3_Msk /*!< Rising trigger event configuration bit of line 3 */
-#define EXTI_RTSR_TR4_Pos (4U)
-#define EXTI_RTSR_TR4_Msk (0x1U << EXTI_RTSR_TR4_Pos) /*!< 0x00000010 */
-#define EXTI_RTSR_TR4 EXTI_RTSR_TR4_Msk /*!< Rising trigger event configuration bit of line 4 */
-#define EXTI_RTSR_TR5_Pos (5U)
-#define EXTI_RTSR_TR5_Msk (0x1U << EXTI_RTSR_TR5_Pos) /*!< 0x00000020 */
-#define EXTI_RTSR_TR5 EXTI_RTSR_TR5_Msk /*!< Rising trigger event configuration bit of line 5 */
-#define EXTI_RTSR_TR6_Pos (6U)
-#define EXTI_RTSR_TR6_Msk (0x1U << EXTI_RTSR_TR6_Pos) /*!< 0x00000040 */
-#define EXTI_RTSR_TR6 EXTI_RTSR_TR6_Msk /*!< Rising trigger event configuration bit of line 6 */
-#define EXTI_RTSR_TR7_Pos (7U)
-#define EXTI_RTSR_TR7_Msk (0x1U << EXTI_RTSR_TR7_Pos) /*!< 0x00000080 */
-#define EXTI_RTSR_TR7 EXTI_RTSR_TR7_Msk /*!< Rising trigger event configuration bit of line 7 */
-#define EXTI_RTSR_TR8_Pos (8U)
-#define EXTI_RTSR_TR8_Msk (0x1U << EXTI_RTSR_TR8_Pos) /*!< 0x00000100 */
-#define EXTI_RTSR_TR8 EXTI_RTSR_TR8_Msk /*!< Rising trigger event configuration bit of line 8 */
-#define EXTI_RTSR_TR9_Pos (9U)
-#define EXTI_RTSR_TR9_Msk (0x1U << EXTI_RTSR_TR9_Pos) /*!< 0x00000200 */
-#define EXTI_RTSR_TR9 EXTI_RTSR_TR9_Msk /*!< Rising trigger event configuration bit of line 9 */
-#define EXTI_RTSR_TR10_Pos (10U)
-#define EXTI_RTSR_TR10_Msk (0x1U << EXTI_RTSR_TR10_Pos) /*!< 0x00000400 */
-#define EXTI_RTSR_TR10 EXTI_RTSR_TR10_Msk /*!< Rising trigger event configuration bit of line 10 */
-#define EXTI_RTSR_TR11_Pos (11U)
-#define EXTI_RTSR_TR11_Msk (0x1U << EXTI_RTSR_TR11_Pos) /*!< 0x00000800 */
-#define EXTI_RTSR_TR11 EXTI_RTSR_TR11_Msk /*!< Rising trigger event configuration bit of line 11 */
-#define EXTI_RTSR_TR12_Pos (12U)
-#define EXTI_RTSR_TR12_Msk (0x1U << EXTI_RTSR_TR12_Pos) /*!< 0x00001000 */
-#define EXTI_RTSR_TR12 EXTI_RTSR_TR12_Msk /*!< Rising trigger event configuration bit of line 12 */
-#define EXTI_RTSR_TR13_Pos (13U)
-#define EXTI_RTSR_TR13_Msk (0x1U << EXTI_RTSR_TR13_Pos) /*!< 0x00002000 */
-#define EXTI_RTSR_TR13 EXTI_RTSR_TR13_Msk /*!< Rising trigger event configuration bit of line 13 */
-#define EXTI_RTSR_TR14_Pos (14U)
-#define EXTI_RTSR_TR14_Msk (0x1U << EXTI_RTSR_TR14_Pos) /*!< 0x00004000 */
-#define EXTI_RTSR_TR14 EXTI_RTSR_TR14_Msk /*!< Rising trigger event configuration bit of line 14 */
-#define EXTI_RTSR_TR15_Pos (15U)
-#define EXTI_RTSR_TR15_Msk (0x1U << EXTI_RTSR_TR15_Pos) /*!< 0x00008000 */
-#define EXTI_RTSR_TR15 EXTI_RTSR_TR15_Msk /*!< Rising trigger event configuration bit of line 15 */
-#define EXTI_RTSR_TR16_Pos (16U)
-#define EXTI_RTSR_TR16_Msk (0x1U << EXTI_RTSR_TR16_Pos) /*!< 0x00010000 */
-#define EXTI_RTSR_TR16 EXTI_RTSR_TR16_Msk /*!< Rising trigger event configuration bit of line 16 */
-#define EXTI_RTSR_TR17_Pos (17U)
-#define EXTI_RTSR_TR17_Msk (0x1U << EXTI_RTSR_TR17_Pos) /*!< 0x00020000 */
-#define EXTI_RTSR_TR17 EXTI_RTSR_TR17_Msk /*!< Rising trigger event configuration bit of line 17 */
-#define EXTI_RTSR_TR18_Pos (18U)
-#define EXTI_RTSR_TR18_Msk (0x1U << EXTI_RTSR_TR18_Pos) /*!< 0x00040000 */
-#define EXTI_RTSR_TR18 EXTI_RTSR_TR18_Msk /*!< Rising trigger event configuration bit of line 18 */
-#define EXTI_RTSR_TR19_Pos (19U)
-#define EXTI_RTSR_TR19_Msk (0x1U << EXTI_RTSR_TR19_Pos) /*!< 0x00080000 */
-#define EXTI_RTSR_TR19 EXTI_RTSR_TR19_Msk /*!< Rising trigger event configuration bit of line 19 */
-
-/* References Defines */
-#define EXTI_RTSR_RT0 EXTI_RTSR_TR0
-#define EXTI_RTSR_RT1 EXTI_RTSR_TR1
-#define EXTI_RTSR_RT2 EXTI_RTSR_TR2
-#define EXTI_RTSR_RT3 EXTI_RTSR_TR3
-#define EXTI_RTSR_RT4 EXTI_RTSR_TR4
-#define EXTI_RTSR_RT5 EXTI_RTSR_TR5
-#define EXTI_RTSR_RT6 EXTI_RTSR_TR6
-#define EXTI_RTSR_RT7 EXTI_RTSR_TR7
-#define EXTI_RTSR_RT8 EXTI_RTSR_TR8
-#define EXTI_RTSR_RT9 EXTI_RTSR_TR9
-#define EXTI_RTSR_RT10 EXTI_RTSR_TR10
-#define EXTI_RTSR_RT11 EXTI_RTSR_TR11
-#define EXTI_RTSR_RT12 EXTI_RTSR_TR12
-#define EXTI_RTSR_RT13 EXTI_RTSR_TR13
-#define EXTI_RTSR_RT14 EXTI_RTSR_TR14
-#define EXTI_RTSR_RT15 EXTI_RTSR_TR15
-#define EXTI_RTSR_RT16 EXTI_RTSR_TR16
-#define EXTI_RTSR_RT17 EXTI_RTSR_TR17
-#define EXTI_RTSR_RT18 EXTI_RTSR_TR18
-#define EXTI_RTSR_RT19 EXTI_RTSR_TR19
-
-/****************** Bit definition for EXTI_FTSR register *******************/
-#define EXTI_FTSR_TR0_Pos (0U)
-#define EXTI_FTSR_TR0_Msk (0x1U << EXTI_FTSR_TR0_Pos) /*!< 0x00000001 */
-#define EXTI_FTSR_TR0 EXTI_FTSR_TR0_Msk /*!< Falling trigger event configuration bit of line 0 */
-#define EXTI_FTSR_TR1_Pos (1U)
-#define EXTI_FTSR_TR1_Msk (0x1U << EXTI_FTSR_TR1_Pos) /*!< 0x00000002 */
-#define EXTI_FTSR_TR1 EXTI_FTSR_TR1_Msk /*!< Falling trigger event configuration bit of line 1 */
-#define EXTI_FTSR_TR2_Pos (2U)
-#define EXTI_FTSR_TR2_Msk (0x1U << EXTI_FTSR_TR2_Pos) /*!< 0x00000004 */
-#define EXTI_FTSR_TR2 EXTI_FTSR_TR2_Msk /*!< Falling trigger event configuration bit of line 2 */
-#define EXTI_FTSR_TR3_Pos (3U)
-#define EXTI_FTSR_TR3_Msk (0x1U << EXTI_FTSR_TR3_Pos) /*!< 0x00000008 */
-#define EXTI_FTSR_TR3 EXTI_FTSR_TR3_Msk /*!< Falling trigger event configuration bit of line 3 */
-#define EXTI_FTSR_TR4_Pos (4U)
-#define EXTI_FTSR_TR4_Msk (0x1U << EXTI_FTSR_TR4_Pos) /*!< 0x00000010 */
-#define EXTI_FTSR_TR4 EXTI_FTSR_TR4_Msk /*!< Falling trigger event configuration bit of line 4 */
-#define EXTI_FTSR_TR5_Pos (5U)
-#define EXTI_FTSR_TR5_Msk (0x1U << EXTI_FTSR_TR5_Pos) /*!< 0x00000020 */
-#define EXTI_FTSR_TR5 EXTI_FTSR_TR5_Msk /*!< Falling trigger event configuration bit of line 5 */
-#define EXTI_FTSR_TR6_Pos (6U)
-#define EXTI_FTSR_TR6_Msk (0x1U << EXTI_FTSR_TR6_Pos) /*!< 0x00000040 */
-#define EXTI_FTSR_TR6 EXTI_FTSR_TR6_Msk /*!< Falling trigger event configuration bit of line 6 */
-#define EXTI_FTSR_TR7_Pos (7U)
-#define EXTI_FTSR_TR7_Msk (0x1U << EXTI_FTSR_TR7_Pos) /*!< 0x00000080 */
-#define EXTI_FTSR_TR7 EXTI_FTSR_TR7_Msk /*!< Falling trigger event configuration bit of line 7 */
-#define EXTI_FTSR_TR8_Pos (8U)
-#define EXTI_FTSR_TR8_Msk (0x1U << EXTI_FTSR_TR8_Pos) /*!< 0x00000100 */
-#define EXTI_FTSR_TR8 EXTI_FTSR_TR8_Msk /*!< Falling trigger event configuration bit of line 8 */
-#define EXTI_FTSR_TR9_Pos (9U)
-#define EXTI_FTSR_TR9_Msk (0x1U << EXTI_FTSR_TR9_Pos) /*!< 0x00000200 */
-#define EXTI_FTSR_TR9 EXTI_FTSR_TR9_Msk /*!< Falling trigger event configuration bit of line 9 */
-#define EXTI_FTSR_TR10_Pos (10U)
-#define EXTI_FTSR_TR10_Msk (0x1U << EXTI_FTSR_TR10_Pos) /*!< 0x00000400 */
-#define EXTI_FTSR_TR10 EXTI_FTSR_TR10_Msk /*!< Falling trigger event configuration bit of line 10 */
-#define EXTI_FTSR_TR11_Pos (11U)
-#define EXTI_FTSR_TR11_Msk (0x1U << EXTI_FTSR_TR11_Pos) /*!< 0x00000800 */
-#define EXTI_FTSR_TR11 EXTI_FTSR_TR11_Msk /*!< Falling trigger event configuration bit of line 11 */
-#define EXTI_FTSR_TR12_Pos (12U)
-#define EXTI_FTSR_TR12_Msk (0x1U << EXTI_FTSR_TR12_Pos) /*!< 0x00001000 */
-#define EXTI_FTSR_TR12 EXTI_FTSR_TR12_Msk /*!< Falling trigger event configuration bit of line 12 */
-#define EXTI_FTSR_TR13_Pos (13U)
-#define EXTI_FTSR_TR13_Msk (0x1U << EXTI_FTSR_TR13_Pos) /*!< 0x00002000 */
-#define EXTI_FTSR_TR13 EXTI_FTSR_TR13_Msk /*!< Falling trigger event configuration bit of line 13 */
-#define EXTI_FTSR_TR14_Pos (14U)
-#define EXTI_FTSR_TR14_Msk (0x1U << EXTI_FTSR_TR14_Pos) /*!< 0x00004000 */
-#define EXTI_FTSR_TR14 EXTI_FTSR_TR14_Msk /*!< Falling trigger event configuration bit of line 14 */
-#define EXTI_FTSR_TR15_Pos (15U)
-#define EXTI_FTSR_TR15_Msk (0x1U << EXTI_FTSR_TR15_Pos) /*!< 0x00008000 */
-#define EXTI_FTSR_TR15 EXTI_FTSR_TR15_Msk /*!< Falling trigger event configuration bit of line 15 */
-#define EXTI_FTSR_TR16_Pos (16U)
-#define EXTI_FTSR_TR16_Msk (0x1U << EXTI_FTSR_TR16_Pos) /*!< 0x00010000 */
-#define EXTI_FTSR_TR16 EXTI_FTSR_TR16_Msk /*!< Falling trigger event configuration bit of line 16 */
-#define EXTI_FTSR_TR17_Pos (17U)
-#define EXTI_FTSR_TR17_Msk (0x1U << EXTI_FTSR_TR17_Pos) /*!< 0x00020000 */
-#define EXTI_FTSR_TR17 EXTI_FTSR_TR17_Msk /*!< Falling trigger event configuration bit of line 17 */
-#define EXTI_FTSR_TR18_Pos (18U)
-#define EXTI_FTSR_TR18_Msk (0x1U << EXTI_FTSR_TR18_Pos) /*!< 0x00040000 */
-#define EXTI_FTSR_TR18 EXTI_FTSR_TR18_Msk /*!< Falling trigger event configuration bit of line 18 */
-#define EXTI_FTSR_TR19_Pos (19U)
-#define EXTI_FTSR_TR19_Msk (0x1U << EXTI_FTSR_TR19_Pos) /*!< 0x00080000 */
-#define EXTI_FTSR_TR19 EXTI_FTSR_TR19_Msk /*!< Falling trigger event configuration bit of line 19 */
-
-/* References Defines */
-#define EXTI_FTSR_FT0 EXTI_FTSR_TR0
-#define EXTI_FTSR_FT1 EXTI_FTSR_TR1
-#define EXTI_FTSR_FT2 EXTI_FTSR_TR2
-#define EXTI_FTSR_FT3 EXTI_FTSR_TR3
-#define EXTI_FTSR_FT4 EXTI_FTSR_TR4
-#define EXTI_FTSR_FT5 EXTI_FTSR_TR5
-#define EXTI_FTSR_FT6 EXTI_FTSR_TR6
-#define EXTI_FTSR_FT7 EXTI_FTSR_TR7
-#define EXTI_FTSR_FT8 EXTI_FTSR_TR8
-#define EXTI_FTSR_FT9 EXTI_FTSR_TR9
-#define EXTI_FTSR_FT10 EXTI_FTSR_TR10
-#define EXTI_FTSR_FT11 EXTI_FTSR_TR11
-#define EXTI_FTSR_FT12 EXTI_FTSR_TR12
-#define EXTI_FTSR_FT13 EXTI_FTSR_TR13
-#define EXTI_FTSR_FT14 EXTI_FTSR_TR14
-#define EXTI_FTSR_FT15 EXTI_FTSR_TR15
-#define EXTI_FTSR_FT16 EXTI_FTSR_TR16
-#define EXTI_FTSR_FT17 EXTI_FTSR_TR17
-#define EXTI_FTSR_FT18 EXTI_FTSR_TR18
-#define EXTI_FTSR_FT19 EXTI_FTSR_TR19
-
-/****************** Bit definition for EXTI_SWIER register ******************/
-#define EXTI_SWIER_SWIER0_Pos (0U)
-#define EXTI_SWIER_SWIER0_Msk (0x1U << EXTI_SWIER_SWIER0_Pos) /*!< 0x00000001 */
-#define EXTI_SWIER_SWIER0 EXTI_SWIER_SWIER0_Msk /*!< Software Interrupt on line 0 */
-#define EXTI_SWIER_SWIER1_Pos (1U)
-#define EXTI_SWIER_SWIER1_Msk (0x1U << EXTI_SWIER_SWIER1_Pos) /*!< 0x00000002 */
-#define EXTI_SWIER_SWIER1 EXTI_SWIER_SWIER1_Msk /*!< Software Interrupt on line 1 */
-#define EXTI_SWIER_SWIER2_Pos (2U)
-#define EXTI_SWIER_SWIER2_Msk (0x1U << EXTI_SWIER_SWIER2_Pos) /*!< 0x00000004 */
-#define EXTI_SWIER_SWIER2 EXTI_SWIER_SWIER2_Msk /*!< Software Interrupt on line 2 */
-#define EXTI_SWIER_SWIER3_Pos (3U)
-#define EXTI_SWIER_SWIER3_Msk (0x1U << EXTI_SWIER_SWIER3_Pos) /*!< 0x00000008 */
-#define EXTI_SWIER_SWIER3 EXTI_SWIER_SWIER3_Msk /*!< Software Interrupt on line 3 */
-#define EXTI_SWIER_SWIER4_Pos (4U)
-#define EXTI_SWIER_SWIER4_Msk (0x1U << EXTI_SWIER_SWIER4_Pos) /*!< 0x00000010 */
-#define EXTI_SWIER_SWIER4 EXTI_SWIER_SWIER4_Msk /*!< Software Interrupt on line 4 */
-#define EXTI_SWIER_SWIER5_Pos (5U)
-#define EXTI_SWIER_SWIER5_Msk (0x1U << EXTI_SWIER_SWIER5_Pos) /*!< 0x00000020 */
-#define EXTI_SWIER_SWIER5 EXTI_SWIER_SWIER5_Msk /*!< Software Interrupt on line 5 */
-#define EXTI_SWIER_SWIER6_Pos (6U)
-#define EXTI_SWIER_SWIER6_Msk (0x1U << EXTI_SWIER_SWIER6_Pos) /*!< 0x00000040 */
-#define EXTI_SWIER_SWIER6 EXTI_SWIER_SWIER6_Msk /*!< Software Interrupt on line 6 */
-#define EXTI_SWIER_SWIER7_Pos (7U)
-#define EXTI_SWIER_SWIER7_Msk (0x1U << EXTI_SWIER_SWIER7_Pos) /*!< 0x00000080 */
-#define EXTI_SWIER_SWIER7 EXTI_SWIER_SWIER7_Msk /*!< Software Interrupt on line 7 */
-#define EXTI_SWIER_SWIER8_Pos (8U)
-#define EXTI_SWIER_SWIER8_Msk (0x1U << EXTI_SWIER_SWIER8_Pos) /*!< 0x00000100 */
-#define EXTI_SWIER_SWIER8 EXTI_SWIER_SWIER8_Msk /*!< Software Interrupt on line 8 */
-#define EXTI_SWIER_SWIER9_Pos (9U)
-#define EXTI_SWIER_SWIER9_Msk (0x1U << EXTI_SWIER_SWIER9_Pos) /*!< 0x00000200 */
-#define EXTI_SWIER_SWIER9 EXTI_SWIER_SWIER9_Msk /*!< Software Interrupt on line 9 */
-#define EXTI_SWIER_SWIER10_Pos (10U)
-#define EXTI_SWIER_SWIER10_Msk (0x1U << EXTI_SWIER_SWIER10_Pos) /*!< 0x00000400 */
-#define EXTI_SWIER_SWIER10 EXTI_SWIER_SWIER10_Msk /*!< Software Interrupt on line 10 */
-#define EXTI_SWIER_SWIER11_Pos (11U)
-#define EXTI_SWIER_SWIER11_Msk (0x1U << EXTI_SWIER_SWIER11_Pos) /*!< 0x00000800 */
-#define EXTI_SWIER_SWIER11 EXTI_SWIER_SWIER11_Msk /*!< Software Interrupt on line 11 */
-#define EXTI_SWIER_SWIER12_Pos (12U)
-#define EXTI_SWIER_SWIER12_Msk (0x1U << EXTI_SWIER_SWIER12_Pos) /*!< 0x00001000 */
-#define EXTI_SWIER_SWIER12 EXTI_SWIER_SWIER12_Msk /*!< Software Interrupt on line 12 */
-#define EXTI_SWIER_SWIER13_Pos (13U)
-#define EXTI_SWIER_SWIER13_Msk (0x1U << EXTI_SWIER_SWIER13_Pos) /*!< 0x00002000 */
-#define EXTI_SWIER_SWIER13 EXTI_SWIER_SWIER13_Msk /*!< Software Interrupt on line 13 */
-#define EXTI_SWIER_SWIER14_Pos (14U)
-#define EXTI_SWIER_SWIER14_Msk (0x1U << EXTI_SWIER_SWIER14_Pos) /*!< 0x00004000 */
-#define EXTI_SWIER_SWIER14 EXTI_SWIER_SWIER14_Msk /*!< Software Interrupt on line 14 */
-#define EXTI_SWIER_SWIER15_Pos (15U)
-#define EXTI_SWIER_SWIER15_Msk (0x1U << EXTI_SWIER_SWIER15_Pos) /*!< 0x00008000 */
-#define EXTI_SWIER_SWIER15 EXTI_SWIER_SWIER15_Msk /*!< Software Interrupt on line 15 */
-#define EXTI_SWIER_SWIER16_Pos (16U)
-#define EXTI_SWIER_SWIER16_Msk (0x1U << EXTI_SWIER_SWIER16_Pos) /*!< 0x00010000 */
-#define EXTI_SWIER_SWIER16 EXTI_SWIER_SWIER16_Msk /*!< Software Interrupt on line 16 */
-#define EXTI_SWIER_SWIER17_Pos (17U)
-#define EXTI_SWIER_SWIER17_Msk (0x1U << EXTI_SWIER_SWIER17_Pos) /*!< 0x00020000 */
-#define EXTI_SWIER_SWIER17 EXTI_SWIER_SWIER17_Msk /*!< Software Interrupt on line 17 */
-#define EXTI_SWIER_SWIER18_Pos (18U)
-#define EXTI_SWIER_SWIER18_Msk (0x1U << EXTI_SWIER_SWIER18_Pos) /*!< 0x00040000 */
-#define EXTI_SWIER_SWIER18 EXTI_SWIER_SWIER18_Msk /*!< Software Interrupt on line 18 */
-#define EXTI_SWIER_SWIER19_Pos (19U)
-#define EXTI_SWIER_SWIER19_Msk (0x1U << EXTI_SWIER_SWIER19_Pos) /*!< 0x00080000 */
-#define EXTI_SWIER_SWIER19 EXTI_SWIER_SWIER19_Msk /*!< Software Interrupt on line 19 */
-
-/* References Defines */
-#define EXTI_SWIER_SWI0 EXTI_SWIER_SWIER0
-#define EXTI_SWIER_SWI1 EXTI_SWIER_SWIER1
-#define EXTI_SWIER_SWI2 EXTI_SWIER_SWIER2
-#define EXTI_SWIER_SWI3 EXTI_SWIER_SWIER3
-#define EXTI_SWIER_SWI4 EXTI_SWIER_SWIER4
-#define EXTI_SWIER_SWI5 EXTI_SWIER_SWIER5
-#define EXTI_SWIER_SWI6 EXTI_SWIER_SWIER6
-#define EXTI_SWIER_SWI7 EXTI_SWIER_SWIER7
-#define EXTI_SWIER_SWI8 EXTI_SWIER_SWIER8
-#define EXTI_SWIER_SWI9 EXTI_SWIER_SWIER9
-#define EXTI_SWIER_SWI10 EXTI_SWIER_SWIER10
-#define EXTI_SWIER_SWI11 EXTI_SWIER_SWIER11
-#define EXTI_SWIER_SWI12 EXTI_SWIER_SWIER12
-#define EXTI_SWIER_SWI13 EXTI_SWIER_SWIER13
-#define EXTI_SWIER_SWI14 EXTI_SWIER_SWIER14
-#define EXTI_SWIER_SWI15 EXTI_SWIER_SWIER15
-#define EXTI_SWIER_SWI16 EXTI_SWIER_SWIER16
-#define EXTI_SWIER_SWI17 EXTI_SWIER_SWIER17
-#define EXTI_SWIER_SWI18 EXTI_SWIER_SWIER18
-#define EXTI_SWIER_SWI19 EXTI_SWIER_SWIER19
-
-/******************* Bit definition for EXTI_PR register ********************/
-#define EXTI_PR_PR0_Pos (0U)
-#define EXTI_PR_PR0_Msk (0x1U << EXTI_PR_PR0_Pos) /*!< 0x00000001 */
-#define EXTI_PR_PR0 EXTI_PR_PR0_Msk /*!< Pending bit for line 0 */
-#define EXTI_PR_PR1_Pos (1U)
-#define EXTI_PR_PR1_Msk (0x1U << EXTI_PR_PR1_Pos) /*!< 0x00000002 */
-#define EXTI_PR_PR1 EXTI_PR_PR1_Msk /*!< Pending bit for line 1 */
-#define EXTI_PR_PR2_Pos (2U)
-#define EXTI_PR_PR2_Msk (0x1U << EXTI_PR_PR2_Pos) /*!< 0x00000004 */
-#define EXTI_PR_PR2 EXTI_PR_PR2_Msk /*!< Pending bit for line 2 */
-#define EXTI_PR_PR3_Pos (3U)
-#define EXTI_PR_PR3_Msk (0x1U << EXTI_PR_PR3_Pos) /*!< 0x00000008 */
-#define EXTI_PR_PR3 EXTI_PR_PR3_Msk /*!< Pending bit for line 3 */
-#define EXTI_PR_PR4_Pos (4U)
-#define EXTI_PR_PR4_Msk (0x1U << EXTI_PR_PR4_Pos) /*!< 0x00000010 */
-#define EXTI_PR_PR4 EXTI_PR_PR4_Msk /*!< Pending bit for line 4 */
-#define EXTI_PR_PR5_Pos (5U)
-#define EXTI_PR_PR5_Msk (0x1U << EXTI_PR_PR5_Pos) /*!< 0x00000020 */
-#define EXTI_PR_PR5 EXTI_PR_PR5_Msk /*!< Pending bit for line 5 */
-#define EXTI_PR_PR6_Pos (6U)
-#define EXTI_PR_PR6_Msk (0x1U << EXTI_PR_PR6_Pos) /*!< 0x00000040 */
-#define EXTI_PR_PR6 EXTI_PR_PR6_Msk /*!< Pending bit for line 6 */
-#define EXTI_PR_PR7_Pos (7U)
-#define EXTI_PR_PR7_Msk (0x1U << EXTI_PR_PR7_Pos) /*!< 0x00000080 */
-#define EXTI_PR_PR7 EXTI_PR_PR7_Msk /*!< Pending bit for line 7 */
-#define EXTI_PR_PR8_Pos (8U)
-#define EXTI_PR_PR8_Msk (0x1U << EXTI_PR_PR8_Pos) /*!< 0x00000100 */
-#define EXTI_PR_PR8 EXTI_PR_PR8_Msk /*!< Pending bit for line 8 */
-#define EXTI_PR_PR9_Pos (9U)
-#define EXTI_PR_PR9_Msk (0x1U << EXTI_PR_PR9_Pos) /*!< 0x00000200 */
-#define EXTI_PR_PR9 EXTI_PR_PR9_Msk /*!< Pending bit for line 9 */
-#define EXTI_PR_PR10_Pos (10U)
-#define EXTI_PR_PR10_Msk (0x1U << EXTI_PR_PR10_Pos) /*!< 0x00000400 */
-#define EXTI_PR_PR10 EXTI_PR_PR10_Msk /*!< Pending bit for line 10 */
-#define EXTI_PR_PR11_Pos (11U)
-#define EXTI_PR_PR11_Msk (0x1U << EXTI_PR_PR11_Pos) /*!< 0x00000800 */
-#define EXTI_PR_PR11 EXTI_PR_PR11_Msk /*!< Pending bit for line 11 */
-#define EXTI_PR_PR12_Pos (12U)
-#define EXTI_PR_PR12_Msk (0x1U << EXTI_PR_PR12_Pos) /*!< 0x00001000 */
-#define EXTI_PR_PR12 EXTI_PR_PR12_Msk /*!< Pending bit for line 12 */
-#define EXTI_PR_PR13_Pos (13U)
-#define EXTI_PR_PR13_Msk (0x1U << EXTI_PR_PR13_Pos) /*!< 0x00002000 */
-#define EXTI_PR_PR13 EXTI_PR_PR13_Msk /*!< Pending bit for line 13 */
-#define EXTI_PR_PR14_Pos (14U)
-#define EXTI_PR_PR14_Msk (0x1U << EXTI_PR_PR14_Pos) /*!< 0x00004000 */
-#define EXTI_PR_PR14 EXTI_PR_PR14_Msk /*!< Pending bit for line 14 */
-#define EXTI_PR_PR15_Pos (15U)
-#define EXTI_PR_PR15_Msk (0x1U << EXTI_PR_PR15_Pos) /*!< 0x00008000 */
-#define EXTI_PR_PR15 EXTI_PR_PR15_Msk /*!< Pending bit for line 15 */
-#define EXTI_PR_PR16_Pos (16U)
-#define EXTI_PR_PR16_Msk (0x1U << EXTI_PR_PR16_Pos) /*!< 0x00010000 */
-#define EXTI_PR_PR16 EXTI_PR_PR16_Msk /*!< Pending bit for line 16 */
-#define EXTI_PR_PR17_Pos (17U)
-#define EXTI_PR_PR17_Msk (0x1U << EXTI_PR_PR17_Pos) /*!< 0x00020000 */
-#define EXTI_PR_PR17 EXTI_PR_PR17_Msk /*!< Pending bit for line 17 */
-#define EXTI_PR_PR18_Pos (18U)
-#define EXTI_PR_PR18_Msk (0x1U << EXTI_PR_PR18_Pos) /*!< 0x00040000 */
-#define EXTI_PR_PR18 EXTI_PR_PR18_Msk /*!< Pending bit for line 18 */
-#define EXTI_PR_PR19_Pos (19U)
-#define EXTI_PR_PR19_Msk (0x1U << EXTI_PR_PR19_Pos) /*!< 0x00080000 */
-#define EXTI_PR_PR19 EXTI_PR_PR19_Msk /*!< Pending bit for line 19 */
-
-/* References Defines */
-#define EXTI_PR_PIF0 EXTI_PR_PR0
-#define EXTI_PR_PIF1 EXTI_PR_PR1
-#define EXTI_PR_PIF2 EXTI_PR_PR2
-#define EXTI_PR_PIF3 EXTI_PR_PR3
-#define EXTI_PR_PIF4 EXTI_PR_PR4
-#define EXTI_PR_PIF5 EXTI_PR_PR5
-#define EXTI_PR_PIF6 EXTI_PR_PR6
-#define EXTI_PR_PIF7 EXTI_PR_PR7
-#define EXTI_PR_PIF8 EXTI_PR_PR8
-#define EXTI_PR_PIF9 EXTI_PR_PR9
-#define EXTI_PR_PIF10 EXTI_PR_PR10
-#define EXTI_PR_PIF11 EXTI_PR_PR11
-#define EXTI_PR_PIF12 EXTI_PR_PR12
-#define EXTI_PR_PIF13 EXTI_PR_PR13
-#define EXTI_PR_PIF14 EXTI_PR_PR14
-#define EXTI_PR_PIF15 EXTI_PR_PR15
-#define EXTI_PR_PIF16 EXTI_PR_PR16
-#define EXTI_PR_PIF17 EXTI_PR_PR17
-#define EXTI_PR_PIF18 EXTI_PR_PR18
-#define EXTI_PR_PIF19 EXTI_PR_PR19
-
-/******************************************************************************/
-/* */
-/* DMA Controller */
-/* */
-/******************************************************************************/
-
-/******************* Bit definition for DMA_ISR register ********************/
-#define DMA_ISR_GIF1_Pos (0U)
-#define DMA_ISR_GIF1_Msk (0x1U << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */
-#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */
-#define DMA_ISR_TCIF1_Pos (1U)
-#define DMA_ISR_TCIF1_Msk (0x1U << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */
-#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */
-#define DMA_ISR_HTIF1_Pos (2U)
-#define DMA_ISR_HTIF1_Msk (0x1U << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */
-#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */
-#define DMA_ISR_TEIF1_Pos (3U)
-#define DMA_ISR_TEIF1_Msk (0x1U << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */
-#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */
-#define DMA_ISR_GIF2_Pos (4U)
-#define DMA_ISR_GIF2_Msk (0x1U << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */
-#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */
-#define DMA_ISR_TCIF2_Pos (5U)
-#define DMA_ISR_TCIF2_Msk (0x1U << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */
-#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */
-#define DMA_ISR_HTIF2_Pos (6U)
-#define DMA_ISR_HTIF2_Msk (0x1U << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */
-#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */
-#define DMA_ISR_TEIF2_Pos (7U)
-#define DMA_ISR_TEIF2_Msk (0x1U << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */
-#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */
-#define DMA_ISR_GIF3_Pos (8U)
-#define DMA_ISR_GIF3_Msk (0x1U << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */
-#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */
-#define DMA_ISR_TCIF3_Pos (9U)
-#define DMA_ISR_TCIF3_Msk (0x1U << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */
-#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */
-#define DMA_ISR_HTIF3_Pos (10U)
-#define DMA_ISR_HTIF3_Msk (0x1U << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */
-#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */
-#define DMA_ISR_TEIF3_Pos (11U)
-#define DMA_ISR_TEIF3_Msk (0x1U << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */
-#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */
-#define DMA_ISR_GIF4_Pos (12U)
-#define DMA_ISR_GIF4_Msk (0x1U << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */
-#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */
-#define DMA_ISR_TCIF4_Pos (13U)
-#define DMA_ISR_TCIF4_Msk (0x1U << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */
-#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */
-#define DMA_ISR_HTIF4_Pos (14U)
-#define DMA_ISR_HTIF4_Msk (0x1U << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */
-#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */
-#define DMA_ISR_TEIF4_Pos (15U)
-#define DMA_ISR_TEIF4_Msk (0x1U << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */
-#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */
-#define DMA_ISR_GIF5_Pos (16U)
-#define DMA_ISR_GIF5_Msk (0x1U << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */
-#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */
-#define DMA_ISR_TCIF5_Pos (17U)
-#define DMA_ISR_TCIF5_Msk (0x1U << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */
-#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */
-#define DMA_ISR_HTIF5_Pos (18U)
-#define DMA_ISR_HTIF5_Msk (0x1U << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */
-#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */
-#define DMA_ISR_TEIF5_Pos (19U)
-#define DMA_ISR_TEIF5_Msk (0x1U << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */
-#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */
-#define DMA_ISR_GIF6_Pos (20U)
-#define DMA_ISR_GIF6_Msk (0x1U << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */
-#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */
-#define DMA_ISR_TCIF6_Pos (21U)
-#define DMA_ISR_TCIF6_Msk (0x1U << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */
-#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */
-#define DMA_ISR_HTIF6_Pos (22U)
-#define DMA_ISR_HTIF6_Msk (0x1U << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */
-#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */
-#define DMA_ISR_TEIF6_Pos (23U)
-#define DMA_ISR_TEIF6_Msk (0x1U << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */
-#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */
-#define DMA_ISR_GIF7_Pos (24U)
-#define DMA_ISR_GIF7_Msk (0x1U << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */
-#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */
-#define DMA_ISR_TCIF7_Pos (25U)
-#define DMA_ISR_TCIF7_Msk (0x1U << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */
-#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */
-#define DMA_ISR_HTIF7_Pos (26U)
-#define DMA_ISR_HTIF7_Msk (0x1U << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */
-#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */
-#define DMA_ISR_TEIF7_Pos (27U)
-#define DMA_ISR_TEIF7_Msk (0x1U << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */
-#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */
-
-/******************* Bit definition for DMA_IFCR register *******************/
-#define DMA_IFCR_CGIF1_Pos (0U)
-#define DMA_IFCR_CGIF1_Msk (0x1U << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */
-#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clear */
-#define DMA_IFCR_CTCIF1_Pos (1U)
-#define DMA_IFCR_CTCIF1_Msk (0x1U << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */
-#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */
-#define DMA_IFCR_CHTIF1_Pos (2U)
-#define DMA_IFCR_CHTIF1_Msk (0x1U << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */
-#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */
-#define DMA_IFCR_CTEIF1_Pos (3U)
-#define DMA_IFCR_CTEIF1_Msk (0x1U << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */
-#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */
-#define DMA_IFCR_CGIF2_Pos (4U)
-#define DMA_IFCR_CGIF2_Msk (0x1U << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */
-#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */
-#define DMA_IFCR_CTCIF2_Pos (5U)
-#define DMA_IFCR_CTCIF2_Msk (0x1U << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */
-#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */
-#define DMA_IFCR_CHTIF2_Pos (6U)
-#define DMA_IFCR_CHTIF2_Msk (0x1U << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */
-#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */
-#define DMA_IFCR_CTEIF2_Pos (7U)
-#define DMA_IFCR_CTEIF2_Msk (0x1U << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */
-#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */
-#define DMA_IFCR_CGIF3_Pos (8U)
-#define DMA_IFCR_CGIF3_Msk (0x1U << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */
-#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */
-#define DMA_IFCR_CTCIF3_Pos (9U)
-#define DMA_IFCR_CTCIF3_Msk (0x1U << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */
-#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */
-#define DMA_IFCR_CHTIF3_Pos (10U)
-#define DMA_IFCR_CHTIF3_Msk (0x1U << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */
-#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */
-#define DMA_IFCR_CTEIF3_Pos (11U)
-#define DMA_IFCR_CTEIF3_Msk (0x1U << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */
-#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */
-#define DMA_IFCR_CGIF4_Pos (12U)
-#define DMA_IFCR_CGIF4_Msk (0x1U << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */
-#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */
-#define DMA_IFCR_CTCIF4_Pos (13U)
-#define DMA_IFCR_CTCIF4_Msk (0x1U << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */
-#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */
-#define DMA_IFCR_CHTIF4_Pos (14U)
-#define DMA_IFCR_CHTIF4_Msk (0x1U << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */
-#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */
-#define DMA_IFCR_CTEIF4_Pos (15U)
-#define DMA_IFCR_CTEIF4_Msk (0x1U << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */
-#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */
-#define DMA_IFCR_CGIF5_Pos (16U)
-#define DMA_IFCR_CGIF5_Msk (0x1U << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */
-#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */
-#define DMA_IFCR_CTCIF5_Pos (17U)
-#define DMA_IFCR_CTCIF5_Msk (0x1U << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */
-#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */
-#define DMA_IFCR_CHTIF5_Pos (18U)
-#define DMA_IFCR_CHTIF5_Msk (0x1U << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */
-#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */
-#define DMA_IFCR_CTEIF5_Pos (19U)
-#define DMA_IFCR_CTEIF5_Msk (0x1U << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */
-#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */
-#define DMA_IFCR_CGIF6_Pos (20U)
-#define DMA_IFCR_CGIF6_Msk (0x1U << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */
-#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */
-#define DMA_IFCR_CTCIF6_Pos (21U)
-#define DMA_IFCR_CTCIF6_Msk (0x1U << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */
-#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */
-#define DMA_IFCR_CHTIF6_Pos (22U)
-#define DMA_IFCR_CHTIF6_Msk (0x1U << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */
-#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */
-#define DMA_IFCR_CTEIF6_Pos (23U)
-#define DMA_IFCR_CTEIF6_Msk (0x1U << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */
-#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */
-#define DMA_IFCR_CGIF7_Pos (24U)
-#define DMA_IFCR_CGIF7_Msk (0x1U << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */
-#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */
-#define DMA_IFCR_CTCIF7_Pos (25U)
-#define DMA_IFCR_CTCIF7_Msk (0x1U << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */
-#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */
-#define DMA_IFCR_CHTIF7_Pos (26U)
-#define DMA_IFCR_CHTIF7_Msk (0x1U << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */
-#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */
-#define DMA_IFCR_CTEIF7_Pos (27U)
-#define DMA_IFCR_CTEIF7_Msk (0x1U << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */
-#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */
-
-/******************* Bit definition for DMA_CCR register *******************/
-#define DMA_CCR_EN_Pos (0U)
-#define DMA_CCR_EN_Msk (0x1U << DMA_CCR_EN_Pos) /*!< 0x00000001 */
-#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */
-#define DMA_CCR_TCIE_Pos (1U)
-#define DMA_CCR_TCIE_Msk (0x1U << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */
-#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */
-#define DMA_CCR_HTIE_Pos (2U)
-#define DMA_CCR_HTIE_Msk (0x1U << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */
-#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */
-#define DMA_CCR_TEIE_Pos (3U)
-#define DMA_CCR_TEIE_Msk (0x1U << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */
-#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */
-#define DMA_CCR_DIR_Pos (4U)
-#define DMA_CCR_DIR_Msk (0x1U << DMA_CCR_DIR_Pos) /*!< 0x00000010 */
-#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */
-#define DMA_CCR_CIRC_Pos (5U)
-#define DMA_CCR_CIRC_Msk (0x1U << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */
-#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */
-#define DMA_CCR_PINC_Pos (6U)
-#define DMA_CCR_PINC_Msk (0x1U << DMA_CCR_PINC_Pos) /*!< 0x00000040 */
-#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */
-#define DMA_CCR_MINC_Pos (7U)
-#define DMA_CCR_MINC_Msk (0x1U << DMA_CCR_MINC_Pos) /*!< 0x00000080 */
-#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */
-
-#define DMA_CCR_PSIZE_Pos (8U)
-#define DMA_CCR_PSIZE_Msk (0x3U << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */
-#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */
-#define DMA_CCR_PSIZE_0 (0x1U << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */
-#define DMA_CCR_PSIZE_1 (0x2U << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */
-
-#define DMA_CCR_MSIZE_Pos (10U)
-#define DMA_CCR_MSIZE_Msk (0x3U << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */
-#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */
-#define DMA_CCR_MSIZE_0 (0x1U << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */
-#define DMA_CCR_MSIZE_1 (0x2U << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */
-
-#define DMA_CCR_PL_Pos (12U)
-#define DMA_CCR_PL_Msk (0x3U << DMA_CCR_PL_Pos) /*!< 0x00003000 */
-#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level) */
-#define DMA_CCR_PL_0 (0x1U << DMA_CCR_PL_Pos) /*!< 0x00001000 */
-#define DMA_CCR_PL_1 (0x2U << DMA_CCR_PL_Pos) /*!< 0x00002000 */
-
-#define DMA_CCR_MEM2MEM_Pos (14U)
-#define DMA_CCR_MEM2MEM_Msk (0x1U << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */
-#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */
-
-/****************** Bit definition for DMA_CNDTR register ******************/
-#define DMA_CNDTR_NDT_Pos (0U)
-#define DMA_CNDTR_NDT_Msk (0xFFFFU << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */
-#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */
-
-/****************** Bit definition for DMA_CPAR register *******************/
-#define DMA_CPAR_PA_Pos (0U)
-#define DMA_CPAR_PA_Msk (0xFFFFFFFFU << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */
-#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */
-
-/****************** Bit definition for DMA_CMAR register *******************/
-#define DMA_CMAR_MA_Pos (0U)
-#define DMA_CMAR_MA_Msk (0xFFFFFFFFU << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */
-#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */
-
-/******************************************************************************/
-/* */
-/* Analog to Digital Converter (ADC) */
-/* */
-/******************************************************************************/
-
-/*
- * @brief Specific device feature definitions (not present on all devices in the STM32F1 family)
- */
-#define ADC_MULTIMODE_SUPPORT /*!< ADC feature available only on specific devices: multimode available on devices with several ADC instances */
-
-/******************** Bit definition for ADC_SR register ********************/
-#define ADC_SR_AWD_Pos (0U)
-#define ADC_SR_AWD_Msk (0x1U << ADC_SR_AWD_Pos) /*!< 0x00000001 */
-#define ADC_SR_AWD ADC_SR_AWD_Msk /*!< ADC analog watchdog 1 flag */
-#define ADC_SR_EOS_Pos (1U)
-#define ADC_SR_EOS_Msk (0x1U << ADC_SR_EOS_Pos) /*!< 0x00000002 */
-#define ADC_SR_EOS ADC_SR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */
-#define ADC_SR_JEOS_Pos (2U)
-#define ADC_SR_JEOS_Msk (0x1U << ADC_SR_JEOS_Pos) /*!< 0x00000004 */
-#define ADC_SR_JEOS ADC_SR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */
-#define ADC_SR_JSTRT_Pos (3U)
-#define ADC_SR_JSTRT_Msk (0x1U << ADC_SR_JSTRT_Pos) /*!< 0x00000008 */
-#define ADC_SR_JSTRT ADC_SR_JSTRT_Msk /*!< ADC group injected conversion start flag */
-#define ADC_SR_STRT_Pos (4U)
-#define ADC_SR_STRT_Msk (0x1U << ADC_SR_STRT_Pos) /*!< 0x00000010 */
-#define ADC_SR_STRT ADC_SR_STRT_Msk /*!< ADC group regular conversion start flag */
-
-/* Legacy defines */
-#define ADC_SR_EOC (ADC_SR_EOS)
-#define ADC_SR_JEOC (ADC_SR_JEOS)
-
-/******************* Bit definition for ADC_CR1 register ********************/
-#define ADC_CR1_AWDCH_Pos (0U)
-#define ADC_CR1_AWDCH_Msk (0x1FU << ADC_CR1_AWDCH_Pos) /*!< 0x0000001F */
-#define ADC_CR1_AWDCH ADC_CR1_AWDCH_Msk /*!< ADC analog watchdog 1 monitored channel selection */
-#define ADC_CR1_AWDCH_0 (0x01U << ADC_CR1_AWDCH_Pos) /*!< 0x00000001 */
-#define ADC_CR1_AWDCH_1 (0x02U << ADC_CR1_AWDCH_Pos) /*!< 0x00000002 */
-#define ADC_CR1_AWDCH_2 (0x04U << ADC_CR1_AWDCH_Pos) /*!< 0x00000004 */
-#define ADC_CR1_AWDCH_3 (0x08U << ADC_CR1_AWDCH_Pos) /*!< 0x00000008 */
-#define ADC_CR1_AWDCH_4 (0x10U << ADC_CR1_AWDCH_Pos) /*!< 0x00000010 */
-
-#define ADC_CR1_EOSIE_Pos (5U)
-#define ADC_CR1_EOSIE_Msk (0x1U << ADC_CR1_EOSIE_Pos) /*!< 0x00000020 */
-#define ADC_CR1_EOSIE ADC_CR1_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */
-#define ADC_CR1_AWDIE_Pos (6U)
-#define ADC_CR1_AWDIE_Msk (0x1U << ADC_CR1_AWDIE_Pos) /*!< 0x00000040 */
-#define ADC_CR1_AWDIE ADC_CR1_AWDIE_Msk /*!< ADC analog watchdog 1 interrupt */
-#define ADC_CR1_JEOSIE_Pos (7U)
-#define ADC_CR1_JEOSIE_Msk (0x1U << ADC_CR1_JEOSIE_Pos) /*!< 0x00000080 */
-#define ADC_CR1_JEOSIE ADC_CR1_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */
-#define ADC_CR1_SCAN_Pos (8U)
-#define ADC_CR1_SCAN_Msk (0x1U << ADC_CR1_SCAN_Pos) /*!< 0x00000100 */
-#define ADC_CR1_SCAN ADC_CR1_SCAN_Msk /*!< ADC scan mode */
-#define ADC_CR1_AWDSGL_Pos (9U)
-#define ADC_CR1_AWDSGL_Msk (0x1U << ADC_CR1_AWDSGL_Pos) /*!< 0x00000200 */
-#define ADC_CR1_AWDSGL ADC_CR1_AWDSGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */
-#define ADC_CR1_JAUTO_Pos (10U)
-#define ADC_CR1_JAUTO_Msk (0x1U << ADC_CR1_JAUTO_Pos) /*!< 0x00000400 */
-#define ADC_CR1_JAUTO ADC_CR1_JAUTO_Msk /*!< ADC group injected automatic trigger mode */
-#define ADC_CR1_DISCEN_Pos (11U)
-#define ADC_CR1_DISCEN_Msk (0x1U << ADC_CR1_DISCEN_Pos) /*!< 0x00000800 */
-#define ADC_CR1_DISCEN ADC_CR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */
-#define ADC_CR1_JDISCEN_Pos (12U)
-#define ADC_CR1_JDISCEN_Msk (0x1U << ADC_CR1_JDISCEN_Pos) /*!< 0x00001000 */
-#define ADC_CR1_JDISCEN ADC_CR1_JDISCEN_Msk /*!< ADC group injected sequencer discontinuous mode */
-
-#define ADC_CR1_DISCNUM_Pos (13U)
-#define ADC_CR1_DISCNUM_Msk (0x7U << ADC_CR1_DISCNUM_Pos) /*!< 0x0000E000 */
-#define ADC_CR1_DISCNUM ADC_CR1_DISCNUM_Msk /*!< ADC group regular sequencer discontinuous number of ranks */
-#define ADC_CR1_DISCNUM_0 (0x1U << ADC_CR1_DISCNUM_Pos) /*!< 0x00002000 */
-#define ADC_CR1_DISCNUM_1 (0x2U << ADC_CR1_DISCNUM_Pos) /*!< 0x00004000 */
-#define ADC_CR1_DISCNUM_2 (0x4U << ADC_CR1_DISCNUM_Pos) /*!< 0x00008000 */
-
-#define ADC_CR1_DUALMOD_Pos (16U)
-#define ADC_CR1_DUALMOD_Msk (0xFU << ADC_CR1_DUALMOD_Pos) /*!< 0x000F0000 */
-#define ADC_CR1_DUALMOD ADC_CR1_DUALMOD_Msk /*!< ADC multimode mode selection */
-#define ADC_CR1_DUALMOD_0 (0x1U << ADC_CR1_DUALMOD_Pos) /*!< 0x00010000 */
-#define ADC_CR1_DUALMOD_1 (0x2U << ADC_CR1_DUALMOD_Pos) /*!< 0x00020000 */
-#define ADC_CR1_DUALMOD_2 (0x4U << ADC_CR1_DUALMOD_Pos) /*!< 0x00040000 */
-#define ADC_CR1_DUALMOD_3 (0x8U << ADC_CR1_DUALMOD_Pos) /*!< 0x00080000 */
-
-#define ADC_CR1_JAWDEN_Pos (22U)
-#define ADC_CR1_JAWDEN_Msk (0x1U << ADC_CR1_JAWDEN_Pos) /*!< 0x00400000 */
-#define ADC_CR1_JAWDEN ADC_CR1_JAWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */
-#define ADC_CR1_AWDEN_Pos (23U)
-#define ADC_CR1_AWDEN_Msk (0x1U << ADC_CR1_AWDEN_Pos) /*!< 0x00800000 */
-#define ADC_CR1_AWDEN ADC_CR1_AWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */
-
-/* Legacy defines */
-#define ADC_CR1_EOCIE (ADC_CR1_EOSIE)
-#define ADC_CR1_JEOCIE (ADC_CR1_JEOSIE)
-
-/******************* Bit definition for ADC_CR2 register ********************/
-#define ADC_CR2_ADON_Pos (0U)
-#define ADC_CR2_ADON_Msk (0x1U << ADC_CR2_ADON_Pos) /*!< 0x00000001 */
-#define ADC_CR2_ADON ADC_CR2_ADON_Msk /*!< ADC enable */
-#define ADC_CR2_CONT_Pos (1U)
-#define ADC_CR2_CONT_Msk (0x1U << ADC_CR2_CONT_Pos) /*!< 0x00000002 */
-#define ADC_CR2_CONT ADC_CR2_CONT_Msk /*!< ADC group regular continuous conversion mode */
-#define ADC_CR2_CAL_Pos (2U)
-#define ADC_CR2_CAL_Msk (0x1U << ADC_CR2_CAL_Pos) /*!< 0x00000004 */
-#define ADC_CR2_CAL ADC_CR2_CAL_Msk /*!< ADC calibration start */
-#define ADC_CR2_RSTCAL_Pos (3U)
-#define ADC_CR2_RSTCAL_Msk (0x1U << ADC_CR2_RSTCAL_Pos) /*!< 0x00000008 */
-#define ADC_CR2_RSTCAL ADC_CR2_RSTCAL_Msk /*!< ADC calibration reset */
-#define ADC_CR2_DMA_Pos (8U)
-#define ADC_CR2_DMA_Msk (0x1U << ADC_CR2_DMA_Pos) /*!< 0x00000100 */
-#define ADC_CR2_DMA ADC_CR2_DMA_Msk /*!< ADC DMA transfer enable */
-#define ADC_CR2_ALIGN_Pos (11U)
-#define ADC_CR2_ALIGN_Msk (0x1U << ADC_CR2_ALIGN_Pos) /*!< 0x00000800 */
-#define ADC_CR2_ALIGN ADC_CR2_ALIGN_Msk /*!< ADC data alignement */
-
-#define ADC_CR2_JEXTSEL_Pos (12U)
-#define ADC_CR2_JEXTSEL_Msk (0x7U << ADC_CR2_JEXTSEL_Pos) /*!< 0x00007000 */
-#define ADC_CR2_JEXTSEL ADC_CR2_JEXTSEL_Msk /*!< ADC group injected external trigger source */
-#define ADC_CR2_JEXTSEL_0 (0x1U << ADC_CR2_JEXTSEL_Pos) /*!< 0x00001000 */
-#define ADC_CR2_JEXTSEL_1 (0x2U << ADC_CR2_JEXTSEL_Pos) /*!< 0x00002000 */
-#define ADC_CR2_JEXTSEL_2 (0x4U << ADC_CR2_JEXTSEL_Pos) /*!< 0x00004000 */
-
-#define ADC_CR2_JEXTTRIG_Pos (15U)
-#define ADC_CR2_JEXTTRIG_Msk (0x1U << ADC_CR2_JEXTTRIG_Pos) /*!< 0x00008000 */
-#define ADC_CR2_JEXTTRIG ADC_CR2_JEXTTRIG_Msk /*!< ADC group injected external trigger enable */
-
-#define ADC_CR2_EXTSEL_Pos (17U)
-#define ADC_CR2_EXTSEL_Msk (0x7U << ADC_CR2_EXTSEL_Pos) /*!< 0x000E0000 */
-#define ADC_CR2_EXTSEL ADC_CR2_EXTSEL_Msk /*!< ADC group regular external trigger source */
-#define ADC_CR2_EXTSEL_0 (0x1U << ADC_CR2_EXTSEL_Pos) /*!< 0x00020000 */
-#define ADC_CR2_EXTSEL_1 (0x2U << ADC_CR2_EXTSEL_Pos) /*!< 0x00040000 */
-#define ADC_CR2_EXTSEL_2 (0x4U << ADC_CR2_EXTSEL_Pos) /*!< 0x00080000 */
-
-#define ADC_CR2_EXTTRIG_Pos (20U)
-#define ADC_CR2_EXTTRIG_Msk (0x1U << ADC_CR2_EXTTRIG_Pos) /*!< 0x00100000 */
-#define ADC_CR2_EXTTRIG ADC_CR2_EXTTRIG_Msk /*!< ADC group regular external trigger enable */
-#define ADC_CR2_JSWSTART_Pos (21U)
-#define ADC_CR2_JSWSTART_Msk (0x1U << ADC_CR2_JSWSTART_Pos) /*!< 0x00200000 */
-#define ADC_CR2_JSWSTART ADC_CR2_JSWSTART_Msk /*!< ADC group injected conversion start */
-#define ADC_CR2_SWSTART_Pos (22U)
-#define ADC_CR2_SWSTART_Msk (0x1U << ADC_CR2_SWSTART_Pos) /*!< 0x00400000 */
-#define ADC_CR2_SWSTART ADC_CR2_SWSTART_Msk /*!< ADC group regular conversion start */
-#define ADC_CR2_TSVREFE_Pos (23U)
-#define ADC_CR2_TSVREFE_Msk (0x1U << ADC_CR2_TSVREFE_Pos) /*!< 0x00800000 */
-#define ADC_CR2_TSVREFE ADC_CR2_TSVREFE_Msk /*!< ADC internal path to VrefInt and temperature sensor enable */
-
-/****************** Bit definition for ADC_SMPR1 register *******************/
-#define ADC_SMPR1_SMP10_Pos (0U)
-#define ADC_SMPR1_SMP10_Msk (0x7U << ADC_SMPR1_SMP10_Pos) /*!< 0x00000007 */
-#define ADC_SMPR1_SMP10 ADC_SMPR1_SMP10_Msk /*!< ADC channel 10 sampling time selection */
-#define ADC_SMPR1_SMP10_0 (0x1U << ADC_SMPR1_SMP10_Pos) /*!< 0x00000001 */
-#define ADC_SMPR1_SMP10_1 (0x2U << ADC_SMPR1_SMP10_Pos) /*!< 0x00000002 */
-#define ADC_SMPR1_SMP10_2 (0x4U << ADC_SMPR1_SMP10_Pos) /*!< 0x00000004 */
-
-#define ADC_SMPR1_SMP11_Pos (3U)
-#define ADC_SMPR1_SMP11_Msk (0x7U << ADC_SMPR1_SMP11_Pos) /*!< 0x00000038 */
-#define ADC_SMPR1_SMP11 ADC_SMPR1_SMP11_Msk /*!< ADC channel 11 sampling time selection */
-#define ADC_SMPR1_SMP11_0 (0x1U << ADC_SMPR1_SMP11_Pos) /*!< 0x00000008 */
-#define ADC_SMPR1_SMP11_1 (0x2U << ADC_SMPR1_SMP11_Pos) /*!< 0x00000010 */
-#define ADC_SMPR1_SMP11_2 (0x4U << ADC_SMPR1_SMP11_Pos) /*!< 0x00000020 */
-
-#define ADC_SMPR1_SMP12_Pos (6U)
-#define ADC_SMPR1_SMP12_Msk (0x7U << ADC_SMPR1_SMP12_Pos) /*!< 0x000001C0 */
-#define ADC_SMPR1_SMP12 ADC_SMPR1_SMP12_Msk /*!< ADC channel 12 sampling time selection */
-#define ADC_SMPR1_SMP12_0 (0x1U << ADC_SMPR1_SMP12_Pos) /*!< 0x00000040 */
-#define ADC_SMPR1_SMP12_1 (0x2U << ADC_SMPR1_SMP12_Pos) /*!< 0x00000080 */
-#define ADC_SMPR1_SMP12_2 (0x4U << ADC_SMPR1_SMP12_Pos) /*!< 0x00000100 */
-
-#define ADC_SMPR1_SMP13_Pos (9U)
-#define ADC_SMPR1_SMP13_Msk (0x7U << ADC_SMPR1_SMP13_Pos) /*!< 0x00000E00 */
-#define ADC_SMPR1_SMP13 ADC_SMPR1_SMP13_Msk /*!< ADC channel 13 sampling time selection */
-#define ADC_SMPR1_SMP13_0 (0x1U << ADC_SMPR1_SMP13_Pos) /*!< 0x00000200 */
-#define ADC_SMPR1_SMP13_1 (0x2U << ADC_SMPR1_SMP13_Pos) /*!< 0x00000400 */
-#define ADC_SMPR1_SMP13_2 (0x4U << ADC_SMPR1_SMP13_Pos) /*!< 0x00000800 */
-
-#define ADC_SMPR1_SMP14_Pos (12U)
-#define ADC_SMPR1_SMP14_Msk (0x7U << ADC_SMPR1_SMP14_Pos) /*!< 0x00007000 */
-#define ADC_SMPR1_SMP14 ADC_SMPR1_SMP14_Msk /*!< ADC channel 14 sampling time selection */
-#define ADC_SMPR1_SMP14_0 (0x1U << ADC_SMPR1_SMP14_Pos) /*!< 0x00001000 */
-#define ADC_SMPR1_SMP14_1 (0x2U << ADC_SMPR1_SMP14_Pos) /*!< 0x00002000 */
-#define ADC_SMPR1_SMP14_2 (0x4U << ADC_SMPR1_SMP14_Pos) /*!< 0x00004000 */
-
-#define ADC_SMPR1_SMP15_Pos (15U)
-#define ADC_SMPR1_SMP15_Msk (0x7U << ADC_SMPR1_SMP15_Pos) /*!< 0x00038000 */
-#define ADC_SMPR1_SMP15 ADC_SMPR1_SMP15_Msk /*!< ADC channel 15 sampling time selection */
-#define ADC_SMPR1_SMP15_0 (0x1U << ADC_SMPR1_SMP15_Pos) /*!< 0x00008000 */
-#define ADC_SMPR1_SMP15_1 (0x2U << ADC_SMPR1_SMP15_Pos) /*!< 0x00010000 */
-#define ADC_SMPR1_SMP15_2 (0x4U << ADC_SMPR1_SMP15_Pos) /*!< 0x00020000 */
-
-#define ADC_SMPR1_SMP16_Pos (18U)
-#define ADC_SMPR1_SMP16_Msk (0x7U << ADC_SMPR1_SMP16_Pos) /*!< 0x001C0000 */
-#define ADC_SMPR1_SMP16 ADC_SMPR1_SMP16_Msk /*!< ADC channel 16 sampling time selection */
-#define ADC_SMPR1_SMP16_0 (0x1U << ADC_SMPR1_SMP16_Pos) /*!< 0x00040000 */
-#define ADC_SMPR1_SMP16_1 (0x2U << ADC_SMPR1_SMP16_Pos) /*!< 0x00080000 */
-#define ADC_SMPR1_SMP16_2 (0x4U << ADC_SMPR1_SMP16_Pos) /*!< 0x00100000 */
-
-#define ADC_SMPR1_SMP17_Pos (21U)
-#define ADC_SMPR1_SMP17_Msk (0x7U << ADC_SMPR1_SMP17_Pos) /*!< 0x00E00000 */
-#define ADC_SMPR1_SMP17 ADC_SMPR1_SMP17_Msk /*!< ADC channel 17 sampling time selection */
-#define ADC_SMPR1_SMP17_0 (0x1U << ADC_SMPR1_SMP17_Pos) /*!< 0x00200000 */
-#define ADC_SMPR1_SMP17_1 (0x2U << ADC_SMPR1_SMP17_Pos) /*!< 0x00400000 */
-#define ADC_SMPR1_SMP17_2 (0x4U << ADC_SMPR1_SMP17_Pos) /*!< 0x00800000 */
-
-/****************** Bit definition for ADC_SMPR2 register *******************/
-#define ADC_SMPR2_SMP0_Pos (0U)
-#define ADC_SMPR2_SMP0_Msk (0x7U << ADC_SMPR2_SMP0_Pos) /*!< 0x00000007 */
-#define ADC_SMPR2_SMP0 ADC_SMPR2_SMP0_Msk /*!< ADC channel 0 sampling time selection */
-#define ADC_SMPR2_SMP0_0 (0x1U << ADC_SMPR2_SMP0_Pos) /*!< 0x00000001 */
-#define ADC_SMPR2_SMP0_1 (0x2U << ADC_SMPR2_SMP0_Pos) /*!< 0x00000002 */
-#define ADC_SMPR2_SMP0_2 (0x4U << ADC_SMPR2_SMP0_Pos) /*!< 0x00000004 */
-
-#define ADC_SMPR2_SMP1_Pos (3U)
-#define ADC_SMPR2_SMP1_Msk (0x7U << ADC_SMPR2_SMP1_Pos) /*!< 0x00000038 */
-#define ADC_SMPR2_SMP1 ADC_SMPR2_SMP1_Msk /*!< ADC channel 1 sampling time selection */
-#define ADC_SMPR2_SMP1_0 (0x1U << ADC_SMPR2_SMP1_Pos) /*!< 0x00000008 */
-#define ADC_SMPR2_SMP1_1 (0x2U << ADC_SMPR2_SMP1_Pos) /*!< 0x00000010 */
-#define ADC_SMPR2_SMP1_2 (0x4U << ADC_SMPR2_SMP1_Pos) /*!< 0x00000020 */
-
-#define ADC_SMPR2_SMP2_Pos (6U)
-#define ADC_SMPR2_SMP2_Msk (0x7U << ADC_SMPR2_SMP2_Pos) /*!< 0x000001C0 */
-#define ADC_SMPR2_SMP2 ADC_SMPR2_SMP2_Msk /*!< ADC channel 2 sampling time selection */
-#define ADC_SMPR2_SMP2_0 (0x1U << ADC_SMPR2_SMP2_Pos) /*!< 0x00000040 */
-#define ADC_SMPR2_SMP2_1 (0x2U << ADC_SMPR2_SMP2_Pos) /*!< 0x00000080 */
-#define ADC_SMPR2_SMP2_2 (0x4U << ADC_SMPR2_SMP2_Pos) /*!< 0x00000100 */
-
-#define ADC_SMPR2_SMP3_Pos (9U)
-#define ADC_SMPR2_SMP3_Msk (0x7U << ADC_SMPR2_SMP3_Pos) /*!< 0x00000E00 */
-#define ADC_SMPR2_SMP3 ADC_SMPR2_SMP3_Msk /*!< ADC channel 3 sampling time selection */
-#define ADC_SMPR2_SMP3_0 (0x1U << ADC_SMPR2_SMP3_Pos) /*!< 0x00000200 */
-#define ADC_SMPR2_SMP3_1 (0x2U << ADC_SMPR2_SMP3_Pos) /*!< 0x00000400 */
-#define ADC_SMPR2_SMP3_2 (0x4U << ADC_SMPR2_SMP3_Pos) /*!< 0x00000800 */
-
-#define ADC_SMPR2_SMP4_Pos (12U)
-#define ADC_SMPR2_SMP4_Msk (0x7U << ADC_SMPR2_SMP4_Pos) /*!< 0x00007000 */
-#define ADC_SMPR2_SMP4 ADC_SMPR2_SMP4_Msk /*!< ADC channel 4 sampling time selection */
-#define ADC_SMPR2_SMP4_0 (0x1U << ADC_SMPR2_SMP4_Pos) /*!< 0x00001000 */
-#define ADC_SMPR2_SMP4_1 (0x2U << ADC_SMPR2_SMP4_Pos) /*!< 0x00002000 */
-#define ADC_SMPR2_SMP4_2 (0x4U << ADC_SMPR2_SMP4_Pos) /*!< 0x00004000 */
-
-#define ADC_SMPR2_SMP5_Pos (15U)
-#define ADC_SMPR2_SMP5_Msk (0x7U << ADC_SMPR2_SMP5_Pos) /*!< 0x00038000 */
-#define ADC_SMPR2_SMP5 ADC_SMPR2_SMP5_Msk /*!< ADC channel 5 sampling time selection */
-#define ADC_SMPR2_SMP5_0 (0x1U << ADC_SMPR2_SMP5_Pos) /*!< 0x00008000 */
-#define ADC_SMPR2_SMP5_1 (0x2U << ADC_SMPR2_SMP5_Pos) /*!< 0x00010000 */
-#define ADC_SMPR2_SMP5_2 (0x4U << ADC_SMPR2_SMP5_Pos) /*!< 0x00020000 */
-
-#define ADC_SMPR2_SMP6_Pos (18U)
-#define ADC_SMPR2_SMP6_Msk (0x7U << ADC_SMPR2_SMP6_Pos) /*!< 0x001C0000 */
-#define ADC_SMPR2_SMP6 ADC_SMPR2_SMP6_Msk /*!< ADC channel 6 sampling time selection */
-#define ADC_SMPR2_SMP6_0 (0x1U << ADC_SMPR2_SMP6_Pos) /*!< 0x00040000 */
-#define ADC_SMPR2_SMP6_1 (0x2U << ADC_SMPR2_SMP6_Pos) /*!< 0x00080000 */
-#define ADC_SMPR2_SMP6_2 (0x4U << ADC_SMPR2_SMP6_Pos) /*!< 0x00100000 */
-
-#define ADC_SMPR2_SMP7_Pos (21U)
-#define ADC_SMPR2_SMP7_Msk (0x7U << ADC_SMPR2_SMP7_Pos) /*!< 0x00E00000 */
-#define ADC_SMPR2_SMP7 ADC_SMPR2_SMP7_Msk /*!< ADC channel 7 sampling time selection */
-#define ADC_SMPR2_SMP7_0 (0x1U << ADC_SMPR2_SMP7_Pos) /*!< 0x00200000 */
-#define ADC_SMPR2_SMP7_1 (0x2U << ADC_SMPR2_SMP7_Pos) /*!< 0x00400000 */
-#define ADC_SMPR2_SMP7_2 (0x4U << ADC_SMPR2_SMP7_Pos) /*!< 0x00800000 */
-
-#define ADC_SMPR2_SMP8_Pos (24U)
-#define ADC_SMPR2_SMP8_Msk (0x7U << ADC_SMPR2_SMP8_Pos) /*!< 0x07000000 */
-#define ADC_SMPR2_SMP8 ADC_SMPR2_SMP8_Msk /*!< ADC channel 8 sampling time selection */
-#define ADC_SMPR2_SMP8_0 (0x1U << ADC_SMPR2_SMP8_Pos) /*!< 0x01000000 */
-#define ADC_SMPR2_SMP8_1 (0x2U << ADC_SMPR2_SMP8_Pos) /*!< 0x02000000 */
-#define ADC_SMPR2_SMP8_2 (0x4U << ADC_SMPR2_SMP8_Pos) /*!< 0x04000000 */
-
-#define ADC_SMPR2_SMP9_Pos (27U)
-#define ADC_SMPR2_SMP9_Msk (0x7U << ADC_SMPR2_SMP9_Pos) /*!< 0x38000000 */
-#define ADC_SMPR2_SMP9 ADC_SMPR2_SMP9_Msk /*!< ADC channel 9 sampling time selection */
-#define ADC_SMPR2_SMP9_0 (0x1U << ADC_SMPR2_SMP9_Pos) /*!< 0x08000000 */
-#define ADC_SMPR2_SMP9_1 (0x2U << ADC_SMPR2_SMP9_Pos) /*!< 0x10000000 */
-#define ADC_SMPR2_SMP9_2 (0x4U << ADC_SMPR2_SMP9_Pos) /*!< 0x20000000 */
-
-/****************** Bit definition for ADC_JOFR1 register *******************/
-#define ADC_JOFR1_JOFFSET1_Pos (0U)
-#define ADC_JOFR1_JOFFSET1_Msk (0xFFFU << ADC_JOFR1_JOFFSET1_Pos) /*!< 0x00000FFF */
-#define ADC_JOFR1_JOFFSET1 ADC_JOFR1_JOFFSET1_Msk /*!< ADC group injected sequencer rank 1 offset value */
-
-/****************** Bit definition for ADC_JOFR2 register *******************/
-#define ADC_JOFR2_JOFFSET2_Pos (0U)
-#define ADC_JOFR2_JOFFSET2_Msk (0xFFFU << ADC_JOFR2_JOFFSET2_Pos) /*!< 0x00000FFF */
-#define ADC_JOFR2_JOFFSET2 ADC_JOFR2_JOFFSET2_Msk /*!< ADC group injected sequencer rank 2 offset value */
-
-/****************** Bit definition for ADC_JOFR3 register *******************/
-#define ADC_JOFR3_JOFFSET3_Pos (0U)
-#define ADC_JOFR3_JOFFSET3_Msk (0xFFFU << ADC_JOFR3_JOFFSET3_Pos) /*!< 0x00000FFF */
-#define ADC_JOFR3_JOFFSET3 ADC_JOFR3_JOFFSET3_Msk /*!< ADC group injected sequencer rank 3 offset value */
-
-/****************** Bit definition for ADC_JOFR4 register *******************/
-#define ADC_JOFR4_JOFFSET4_Pos (0U)
-#define ADC_JOFR4_JOFFSET4_Msk (0xFFFU << ADC_JOFR4_JOFFSET4_Pos) /*!< 0x00000FFF */
-#define ADC_JOFR4_JOFFSET4 ADC_JOFR4_JOFFSET4_Msk /*!< ADC group injected sequencer rank 4 offset value */
-
-/******************* Bit definition for ADC_HTR register ********************/
-#define ADC_HTR_HT_Pos (0U)
-#define ADC_HTR_HT_Msk (0xFFFU << ADC_HTR_HT_Pos) /*!< 0x00000FFF */
-#define ADC_HTR_HT ADC_HTR_HT_Msk /*!< ADC analog watchdog 1 threshold high */
-
-/******************* Bit definition for ADC_LTR register ********************/
-#define ADC_LTR_LT_Pos (0U)
-#define ADC_LTR_LT_Msk (0xFFFU << ADC_LTR_LT_Pos) /*!< 0x00000FFF */
-#define ADC_LTR_LT ADC_LTR_LT_Msk /*!< ADC analog watchdog 1 threshold low */
-
-/******************* Bit definition for ADC_SQR1 register *******************/
-#define ADC_SQR1_SQ13_Pos (0U)
-#define ADC_SQR1_SQ13_Msk (0x1FU << ADC_SQR1_SQ13_Pos) /*!< 0x0000001F */
-#define ADC_SQR1_SQ13 ADC_SQR1_SQ13_Msk /*!< ADC group regular sequencer rank 13 */
-#define ADC_SQR1_SQ13_0 (0x01U << ADC_SQR1_SQ13_Pos) /*!< 0x00000001 */
-#define ADC_SQR1_SQ13_1 (0x02U << ADC_SQR1_SQ13_Pos) /*!< 0x00000002 */
-#define ADC_SQR1_SQ13_2 (0x04U << ADC_SQR1_SQ13_Pos) /*!< 0x00000004 */
-#define ADC_SQR1_SQ13_3 (0x08U << ADC_SQR1_SQ13_Pos) /*!< 0x00000008 */
-#define ADC_SQR1_SQ13_4 (0x10U << ADC_SQR1_SQ13_Pos) /*!< 0x00000010 */
-
-#define ADC_SQR1_SQ14_Pos (5U)
-#define ADC_SQR1_SQ14_Msk (0x1FU << ADC_SQR1_SQ14_Pos) /*!< 0x000003E0 */
-#define ADC_SQR1_SQ14 ADC_SQR1_SQ14_Msk /*!< ADC group regular sequencer rank 14 */
-#define ADC_SQR1_SQ14_0 (0x01U << ADC_SQR1_SQ14_Pos) /*!< 0x00000020 */
-#define ADC_SQR1_SQ14_1 (0x02U << ADC_SQR1_SQ14_Pos) /*!< 0x00000040 */
-#define ADC_SQR1_SQ14_2 (0x04U << ADC_SQR1_SQ14_Pos) /*!< 0x00000080 */
-#define ADC_SQR1_SQ14_3 (0x08U << ADC_SQR1_SQ14_Pos) /*!< 0x00000100 */
-#define ADC_SQR1_SQ14_4 (0x10U << ADC_SQR1_SQ14_Pos) /*!< 0x00000200 */
-
-#define ADC_SQR1_SQ15_Pos (10U)
-#define ADC_SQR1_SQ15_Msk (0x1FU << ADC_SQR1_SQ15_Pos) /*!< 0x00007C00 */
-#define ADC_SQR1_SQ15 ADC_SQR1_SQ15_Msk /*!< ADC group regular sequencer rank 15 */
-#define ADC_SQR1_SQ15_0 (0x01U << ADC_SQR1_SQ15_Pos) /*!< 0x00000400 */
-#define ADC_SQR1_SQ15_1 (0x02U << ADC_SQR1_SQ15_Pos) /*!< 0x00000800 */
-#define ADC_SQR1_SQ15_2 (0x04U << ADC_SQR1_SQ15_Pos) /*!< 0x00001000 */
-#define ADC_SQR1_SQ15_3 (0x08U << ADC_SQR1_SQ15_Pos) /*!< 0x00002000 */
-#define ADC_SQR1_SQ15_4 (0x10U << ADC_SQR1_SQ15_Pos) /*!< 0x00004000 */
-
-#define ADC_SQR1_SQ16_Pos (15U)
-#define ADC_SQR1_SQ16_Msk (0x1FU << ADC_SQR1_SQ16_Pos) /*!< 0x000F8000 */
-#define ADC_SQR1_SQ16 ADC_SQR1_SQ16_Msk /*!< ADC group regular sequencer rank 16 */
-#define ADC_SQR1_SQ16_0 (0x01U << ADC_SQR1_SQ16_Pos) /*!< 0x00008000 */
-#define ADC_SQR1_SQ16_1 (0x02U << ADC_SQR1_SQ16_Pos) /*!< 0x00010000 */
-#define ADC_SQR1_SQ16_2 (0x04U << ADC_SQR1_SQ16_Pos) /*!< 0x00020000 */
-#define ADC_SQR1_SQ16_3 (0x08U << ADC_SQR1_SQ16_Pos) /*!< 0x00040000 */
-#define ADC_SQR1_SQ16_4 (0x10U << ADC_SQR1_SQ16_Pos) /*!< 0x00080000 */
-
-#define ADC_SQR1_L_Pos (20U)
-#define ADC_SQR1_L_Msk (0xFU << ADC_SQR1_L_Pos) /*!< 0x00F00000 */
-#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */
-#define ADC_SQR1_L_0 (0x1U << ADC_SQR1_L_Pos) /*!< 0x00100000 */
-#define ADC_SQR1_L_1 (0x2U << ADC_SQR1_L_Pos) /*!< 0x00200000 */
-#define ADC_SQR1_L_2 (0x4U << ADC_SQR1_L_Pos) /*!< 0x00400000 */
-#define ADC_SQR1_L_3 (0x8U << ADC_SQR1_L_Pos) /*!< 0x00800000 */
-
-/******************* Bit definition for ADC_SQR2 register *******************/
-#define ADC_SQR2_SQ7_Pos (0U)
-#define ADC_SQR2_SQ7_Msk (0x1FU << ADC_SQR2_SQ7_Pos) /*!< 0x0000001F */
-#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */
-#define ADC_SQR2_SQ7_0 (0x01U << ADC_SQR2_SQ7_Pos) /*!< 0x00000001 */
-#define ADC_SQR2_SQ7_1 (0x02U << ADC_SQR2_SQ7_Pos) /*!< 0x00000002 */
-#define ADC_SQR2_SQ7_2 (0x04U << ADC_SQR2_SQ7_Pos) /*!< 0x00000004 */
-#define ADC_SQR2_SQ7_3 (0x08U << ADC_SQR2_SQ7_Pos) /*!< 0x00000008 */
-#define ADC_SQR2_SQ7_4 (0x10U << ADC_SQR2_SQ7_Pos) /*!< 0x00000010 */
-
-#define ADC_SQR2_SQ8_Pos (5U)
-#define ADC_SQR2_SQ8_Msk (0x1FU << ADC_SQR2_SQ8_Pos) /*!< 0x000003E0 */
-#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */
-#define ADC_SQR2_SQ8_0 (0x01U << ADC_SQR2_SQ8_Pos) /*!< 0x00000020 */
-#define ADC_SQR2_SQ8_1 (0x02U << ADC_SQR2_SQ8_Pos) /*!< 0x00000040 */
-#define ADC_SQR2_SQ8_2 (0x04U << ADC_SQR2_SQ8_Pos) /*!< 0x00000080 */
-#define ADC_SQR2_SQ8_3 (0x08U << ADC_SQR2_SQ8_Pos) /*!< 0x00000100 */
-#define ADC_SQR2_SQ8_4 (0x10U << ADC_SQR2_SQ8_Pos) /*!< 0x00000200 */
-
-#define ADC_SQR2_SQ9_Pos (10U)
-#define ADC_SQR2_SQ9_Msk (0x1FU << ADC_SQR2_SQ9_Pos) /*!< 0x00007C00 */
-#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */
-#define ADC_SQR2_SQ9_0 (0x01U << ADC_SQR2_SQ9_Pos) /*!< 0x00000400 */
-#define ADC_SQR2_SQ9_1 (0x02U << ADC_SQR2_SQ9_Pos) /*!< 0x00000800 */
-#define ADC_SQR2_SQ9_2 (0x04U << ADC_SQR2_SQ9_Pos) /*!< 0x00001000 */
-#define ADC_SQR2_SQ9_3 (0x08U << ADC_SQR2_SQ9_Pos) /*!< 0x00002000 */
-#define ADC_SQR2_SQ9_4 (0x10U << ADC_SQR2_SQ9_Pos) /*!< 0x00004000 */
-
-#define ADC_SQR2_SQ10_Pos (15U)
-#define ADC_SQR2_SQ10_Msk (0x1FU << ADC_SQR2_SQ10_Pos) /*!< 0x000F8000 */
-#define ADC_SQR2_SQ10 ADC_SQR2_SQ10_Msk /*!< ADC group regular sequencer rank 10 */
-#define ADC_SQR2_SQ10_0 (0x01U << ADC_SQR2_SQ10_Pos) /*!< 0x00008000 */
-#define ADC_SQR2_SQ10_1 (0x02U << ADC_SQR2_SQ10_Pos) /*!< 0x00010000 */
-#define ADC_SQR2_SQ10_2 (0x04U << ADC_SQR2_SQ10_Pos) /*!< 0x00020000 */
-#define ADC_SQR2_SQ10_3 (0x08U << ADC_SQR2_SQ10_Pos) /*!< 0x00040000 */
-#define ADC_SQR2_SQ10_4 (0x10U << ADC_SQR2_SQ10_Pos) /*!< 0x00080000 */
-
-#define ADC_SQR2_SQ11_Pos (20U)
-#define ADC_SQR2_SQ11_Msk (0x1FU << ADC_SQR2_SQ11_Pos) /*!< 0x01F00000 */
-#define ADC_SQR2_SQ11 ADC_SQR2_SQ11_Msk /*!< ADC group regular sequencer rank 1 */
-#define ADC_SQR2_SQ11_0 (0x01U << ADC_SQR2_SQ11_Pos) /*!< 0x00100000 */
-#define ADC_SQR2_SQ11_1 (0x02U << ADC_SQR2_SQ11_Pos) /*!< 0x00200000 */
-#define ADC_SQR2_SQ11_2 (0x04U << ADC_SQR2_SQ11_Pos) /*!< 0x00400000 */
-#define ADC_SQR2_SQ11_3 (0x08U << ADC_SQR2_SQ11_Pos) /*!< 0x00800000 */
-#define ADC_SQR2_SQ11_4 (0x10U << ADC_SQR2_SQ11_Pos) /*!< 0x01000000 */
-
-#define ADC_SQR2_SQ12_Pos (25U)
-#define ADC_SQR2_SQ12_Msk (0x1FU << ADC_SQR2_SQ12_Pos) /*!< 0x3E000000 */
-#define ADC_SQR2_SQ12 ADC_SQR2_SQ12_Msk /*!< ADC group regular sequencer rank 12 */
-#define ADC_SQR2_SQ12_0 (0x01U << ADC_SQR2_SQ12_Pos) /*!< 0x02000000 */
-#define ADC_SQR2_SQ12_1 (0x02U << ADC_SQR2_SQ12_Pos) /*!< 0x04000000 */
-#define ADC_SQR2_SQ12_2 (0x04U << ADC_SQR2_SQ12_Pos) /*!< 0x08000000 */
-#define ADC_SQR2_SQ12_3 (0x08U << ADC_SQR2_SQ12_Pos) /*!< 0x10000000 */
-#define ADC_SQR2_SQ12_4 (0x10U << ADC_SQR2_SQ12_Pos) /*!< 0x20000000 */
-
-/******************* Bit definition for ADC_SQR3 register *******************/
-#define ADC_SQR3_SQ1_Pos (0U)
-#define ADC_SQR3_SQ1_Msk (0x1FU << ADC_SQR3_SQ1_Pos) /*!< 0x0000001F */
-#define ADC_SQR3_SQ1 ADC_SQR3_SQ1_Msk /*!< ADC group regular sequencer rank 1 */
-#define ADC_SQR3_SQ1_0 (0x01U << ADC_SQR3_SQ1_Pos) /*!< 0x00000001 */
-#define ADC_SQR3_SQ1_1 (0x02U << ADC_SQR3_SQ1_Pos) /*!< 0x00000002 */
-#define ADC_SQR3_SQ1_2 (0x04U << ADC_SQR3_SQ1_Pos) /*!< 0x00000004 */
-#define ADC_SQR3_SQ1_3 (0x08U << ADC_SQR3_SQ1_Pos) /*!< 0x00000008 */
-#define ADC_SQR3_SQ1_4 (0x10U << ADC_SQR3_SQ1_Pos) /*!< 0x00000010 */
-
-#define ADC_SQR3_SQ2_Pos (5U)
-#define ADC_SQR3_SQ2_Msk (0x1FU << ADC_SQR3_SQ2_Pos) /*!< 0x000003E0 */
-#define ADC_SQR3_SQ2 ADC_SQR3_SQ2_Msk /*!< ADC group regular sequencer rank 2 */
-#define ADC_SQR3_SQ2_0 (0x01U << ADC_SQR3_SQ2_Pos) /*!< 0x00000020 */
-#define ADC_SQR3_SQ2_1 (0x02U << ADC_SQR3_SQ2_Pos) /*!< 0x00000040 */
-#define ADC_SQR3_SQ2_2 (0x04U << ADC_SQR3_SQ2_Pos) /*!< 0x00000080 */
-#define ADC_SQR3_SQ2_3 (0x08U << ADC_SQR3_SQ2_Pos) /*!< 0x00000100 */
-#define ADC_SQR3_SQ2_4 (0x10U << ADC_SQR3_SQ2_Pos) /*!< 0x00000200 */
-
-#define ADC_SQR3_SQ3_Pos (10U)
-#define ADC_SQR3_SQ3_Msk (0x1FU << ADC_SQR3_SQ3_Pos) /*!< 0x00007C00 */
-#define ADC_SQR3_SQ3 ADC_SQR3_SQ3_Msk /*!< ADC group regular sequencer rank 3 */
-#define ADC_SQR3_SQ3_0 (0x01U << ADC_SQR3_SQ3_Pos) /*!< 0x00000400 */
-#define ADC_SQR3_SQ3_1 (0x02U << ADC_SQR3_SQ3_Pos) /*!< 0x00000800 */
-#define ADC_SQR3_SQ3_2 (0x04U << ADC_SQR3_SQ3_Pos) /*!< 0x00001000 */
-#define ADC_SQR3_SQ3_3 (0x08U << ADC_SQR3_SQ3_Pos) /*!< 0x00002000 */
-#define ADC_SQR3_SQ3_4 (0x10U << ADC_SQR3_SQ3_Pos) /*!< 0x00004000 */
-
-#define ADC_SQR3_SQ4_Pos (15U)
-#define ADC_SQR3_SQ4_Msk (0x1FU << ADC_SQR3_SQ4_Pos) /*!< 0x000F8000 */
-#define ADC_SQR3_SQ4 ADC_SQR3_SQ4_Msk /*!< ADC group regular sequencer rank 4 */
-#define ADC_SQR3_SQ4_0 (0x01U << ADC_SQR3_SQ4_Pos) /*!< 0x00008000 */
-#define ADC_SQR3_SQ4_1 (0x02U << ADC_SQR3_SQ4_Pos) /*!< 0x00010000 */
-#define ADC_SQR3_SQ4_2 (0x04U << ADC_SQR3_SQ4_Pos) /*!< 0x00020000 */
-#define ADC_SQR3_SQ4_3 (0x08U << ADC_SQR3_SQ4_Pos) /*!< 0x00040000 */
-#define ADC_SQR3_SQ4_4 (0x10U << ADC_SQR3_SQ4_Pos) /*!< 0x00080000 */
-
-#define ADC_SQR3_SQ5_Pos (20U)
-#define ADC_SQR3_SQ5_Msk (0x1FU << ADC_SQR3_SQ5_Pos) /*!< 0x01F00000 */
-#define ADC_SQR3_SQ5 ADC_SQR3_SQ5_Msk /*!< ADC group regular sequencer rank 5 */
-#define ADC_SQR3_SQ5_0 (0x01U << ADC_SQR3_SQ5_Pos) /*!< 0x00100000 */
-#define ADC_SQR3_SQ5_1 (0x02U << ADC_SQR3_SQ5_Pos) /*!< 0x00200000 */
-#define ADC_SQR3_SQ5_2 (0x04U << ADC_SQR3_SQ5_Pos) /*!< 0x00400000 */
-#define ADC_SQR3_SQ5_3 (0x08U << ADC_SQR3_SQ5_Pos) /*!< 0x00800000 */
-#define ADC_SQR3_SQ5_4 (0x10U << ADC_SQR3_SQ5_Pos) /*!< 0x01000000 */
-
-#define ADC_SQR3_SQ6_Pos (25U)
-#define ADC_SQR3_SQ6_Msk (0x1FU << ADC_SQR3_SQ6_Pos) /*!< 0x3E000000 */
-#define ADC_SQR3_SQ6 ADC_SQR3_SQ6_Msk /*!< ADC group regular sequencer rank 6 */
-#define ADC_SQR3_SQ6_0 (0x01U << ADC_SQR3_SQ6_Pos) /*!< 0x02000000 */
-#define ADC_SQR3_SQ6_1 (0x02U << ADC_SQR3_SQ6_Pos) /*!< 0x04000000 */
-#define ADC_SQR3_SQ6_2 (0x04U << ADC_SQR3_SQ6_Pos) /*!< 0x08000000 */
-#define ADC_SQR3_SQ6_3 (0x08U << ADC_SQR3_SQ6_Pos) /*!< 0x10000000 */
-#define ADC_SQR3_SQ6_4 (0x10U << ADC_SQR3_SQ6_Pos) /*!< 0x20000000 */
-
-/******************* Bit definition for ADC_JSQR register *******************/
-#define ADC_JSQR_JSQ1_Pos (0U)
-#define ADC_JSQR_JSQ1_Msk (0x1FU << ADC_JSQR_JSQ1_Pos) /*!< 0x0000001F */
-#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */
-#define ADC_JSQR_JSQ1_0 (0x01U << ADC_JSQR_JSQ1_Pos) /*!< 0x00000001 */
-#define ADC_JSQR_JSQ1_1 (0x02U << ADC_JSQR_JSQ1_Pos) /*!< 0x00000002 */
-#define ADC_JSQR_JSQ1_2 (0x04U << ADC_JSQR_JSQ1_Pos) /*!< 0x00000004 */
-#define ADC_JSQR_JSQ1_3 (0x08U << ADC_JSQR_JSQ1_Pos) /*!< 0x00000008 */
-#define ADC_JSQR_JSQ1_4 (0x10U << ADC_JSQR_JSQ1_Pos) /*!< 0x00000010 */
-
-#define ADC_JSQR_JSQ2_Pos (5U)
-#define ADC_JSQR_JSQ2_Msk (0x1FU << ADC_JSQR_JSQ2_Pos) /*!< 0x000003E0 */
-#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */
-#define ADC_JSQR_JSQ2_0 (0x01U << ADC_JSQR_JSQ2_Pos) /*!< 0x00000020 */
-#define ADC_JSQR_JSQ2_1 (0x02U << ADC_JSQR_JSQ2_Pos) /*!< 0x00000040 */
-#define ADC_JSQR_JSQ2_2 (0x04U << ADC_JSQR_JSQ2_Pos) /*!< 0x00000080 */
-#define ADC_JSQR_JSQ2_3 (0x08U << ADC_JSQR_JSQ2_Pos) /*!< 0x00000100 */
-#define ADC_JSQR_JSQ2_4 (0x10U << ADC_JSQR_JSQ2_Pos) /*!< 0x00000200 */
-
-#define ADC_JSQR_JSQ3_Pos (10U)
-#define ADC_JSQR_JSQ3_Msk (0x1FU << ADC_JSQR_JSQ3_Pos) /*!< 0x00007C00 */
-#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */
-#define ADC_JSQR_JSQ3_0 (0x01U << ADC_JSQR_JSQ3_Pos) /*!< 0x00000400 */
-#define ADC_JSQR_JSQ3_1 (0x02U << ADC_JSQR_JSQ3_Pos) /*!< 0x00000800 */
-#define ADC_JSQR_JSQ3_2 (0x04U << ADC_JSQR_JSQ3_Pos) /*!< 0x00001000 */
-#define ADC_JSQR_JSQ3_3 (0x08U << ADC_JSQR_JSQ3_Pos) /*!< 0x00002000 */
-#define ADC_JSQR_JSQ3_4 (0x10U << ADC_JSQR_JSQ3_Pos) /*!< 0x00004000 */
-
-#define ADC_JSQR_JSQ4_Pos (15U)
-#define ADC_JSQR_JSQ4_Msk (0x1FU << ADC_JSQR_JSQ4_Pos) /*!< 0x000F8000 */
-#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */
-#define ADC_JSQR_JSQ4_0 (0x01U << ADC_JSQR_JSQ4_Pos) /*!< 0x00008000 */
-#define ADC_JSQR_JSQ4_1 (0x02U << ADC_JSQR_JSQ4_Pos) /*!< 0x00010000 */
-#define ADC_JSQR_JSQ4_2 (0x04U << ADC_JSQR_JSQ4_Pos) /*!< 0x00020000 */
-#define ADC_JSQR_JSQ4_3 (0x08U << ADC_JSQR_JSQ4_Pos) /*!< 0x00040000 */
-#define ADC_JSQR_JSQ4_4 (0x10U << ADC_JSQR_JSQ4_Pos) /*!< 0x00080000 */
-
-#define ADC_JSQR_JL_Pos (20U)
-#define ADC_JSQR_JL_Msk (0x3U << ADC_JSQR_JL_Pos) /*!< 0x00300000 */
-#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */
-#define ADC_JSQR_JL_0 (0x1U << ADC_JSQR_JL_Pos) /*!< 0x00100000 */
-#define ADC_JSQR_JL_1 (0x2U << ADC_JSQR_JL_Pos) /*!< 0x00200000 */
-
-/******************* Bit definition for ADC_JDR1 register *******************/
-#define ADC_JDR1_JDATA_Pos (0U)
-#define ADC_JDR1_JDATA_Msk (0xFFFFU << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */
-#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */
-
-/******************* Bit definition for ADC_JDR2 register *******************/
-#define ADC_JDR2_JDATA_Pos (0U)
-#define ADC_JDR2_JDATA_Msk (0xFFFFU << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */
-#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */
-
-/******************* Bit definition for ADC_JDR3 register *******************/
-#define ADC_JDR3_JDATA_Pos (0U)
-#define ADC_JDR3_JDATA_Msk (0xFFFFU << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */
-#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */
-
-/******************* Bit definition for ADC_JDR4 register *******************/
-#define ADC_JDR4_JDATA_Pos (0U)
-#define ADC_JDR4_JDATA_Msk (0xFFFFU << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */
-#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */
-
-/******************** Bit definition for ADC_DR register ********************/
-#define ADC_DR_DATA_Pos (0U)
-#define ADC_DR_DATA_Msk (0xFFFFU << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */
-#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */
-#define ADC_DR_ADC2DATA_Pos (16U)
-#define ADC_DR_ADC2DATA_Msk (0xFFFFU << ADC_DR_ADC2DATA_Pos) /*!< 0xFFFF0000 */
-#define ADC_DR_ADC2DATA ADC_DR_ADC2DATA_Msk /*!< ADC group regular conversion data for ADC slave, in multimode */
-
-
-/*****************************************************************************/
-/* */
-/* Timers (TIM) */
-/* */
-/*****************************************************************************/
-/******************* Bit definition for TIM_CR1 register *******************/
-#define TIM_CR1_CEN_Pos (0U)
-#define TIM_CR1_CEN_Msk (0x1U << TIM_CR1_CEN_Pos) /*!< 0x00000001 */
-#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!<Counter enable */
-#define TIM_CR1_UDIS_Pos (1U)
-#define TIM_CR1_UDIS_Msk (0x1U << TIM_CR1_UDIS_Pos) /*!< 0x00000002 */
-#define TIM_CR1_UDIS TIM_CR1_UDIS_Msk /*!<Update disable */
-#define TIM_CR1_URS_Pos (2U)
-#define TIM_CR1_URS_Msk (0x1U << TIM_CR1_URS_Pos) /*!< 0x00000004 */
-#define TIM_CR1_URS TIM_CR1_URS_Msk /*!<Update request source */
-#define TIM_CR1_OPM_Pos (3U)
-#define TIM_CR1_OPM_Msk (0x1U << TIM_CR1_OPM_Pos) /*!< 0x00000008 */
-#define TIM_CR1_OPM TIM_CR1_OPM_Msk /*!<One pulse mode */
-#define TIM_CR1_DIR_Pos (4U)
-#define TIM_CR1_DIR_Msk (0x1U << TIM_CR1_DIR_Pos) /*!< 0x00000010 */
-#define TIM_CR1_DIR TIM_CR1_DIR_Msk /*!<Direction */
-
-#define TIM_CR1_CMS_Pos (5U)
-#define TIM_CR1_CMS_Msk (0x3U << TIM_CR1_CMS_Pos) /*!< 0x00000060 */
-#define TIM_CR1_CMS TIM_CR1_CMS_Msk /*!<CMS[1:0] bits (Center-aligned mode selection) */
-#define TIM_CR1_CMS_0 (0x1U << TIM_CR1_CMS_Pos) /*!< 0x00000020 */
-#define TIM_CR1_CMS_1 (0x2U << TIM_CR1_CMS_Pos) /*!< 0x00000040 */
-
-#define TIM_CR1_ARPE_Pos (7U)
-#define TIM_CR1_ARPE_Msk (0x1U << TIM_CR1_ARPE_Pos) /*!< 0x00000080 */
-#define TIM_CR1_ARPE TIM_CR1_ARPE_Msk /*!<Auto-reload preload enable */
-
-#define TIM_CR1_CKD_Pos (8U)
-#define TIM_CR1_CKD_Msk (0x3U << TIM_CR1_CKD_Pos) /*!< 0x00000300 */
-#define TIM_CR1_CKD TIM_CR1_CKD_Msk /*!<CKD[1:0] bits (clock division) */
-#define TIM_CR1_CKD_0 (0x1U << TIM_CR1_CKD_Pos) /*!< 0x00000100 */
-#define TIM_CR1_CKD_1 (0x2U << TIM_CR1_CKD_Pos) /*!< 0x00000200 */
-
-/******************* Bit definition for TIM_CR2 register *******************/
-#define TIM_CR2_CCPC_Pos (0U)
-#define TIM_CR2_CCPC_Msk (0x1U << TIM_CR2_CCPC_Pos) /*!< 0x00000001 */
-#define TIM_CR2_CCPC TIM_CR2_CCPC_Msk /*!<Capture/Compare Preloaded Control */
-#define TIM_CR2_CCUS_Pos (2U)
-#define TIM_CR2_CCUS_Msk (0x1U << TIM_CR2_CCUS_Pos) /*!< 0x00000004 */
-#define TIM_CR2_CCUS TIM_CR2_CCUS_Msk /*!<Capture/Compare Control Update Selection */
-#define TIM_CR2_CCDS_Pos (3U)
-#define TIM_CR2_CCDS_Msk (0x1U << TIM_CR2_CCDS_Pos) /*!< 0x00000008 */
-#define TIM_CR2_CCDS TIM_CR2_CCDS_Msk /*!<Capture/Compare DMA Selection */
-
-#define TIM_CR2_MMS_Pos (4U)
-#define TIM_CR2_MMS_Msk (0x7U << TIM_CR2_MMS_Pos) /*!< 0x00000070 */
-#define TIM_CR2_MMS TIM_CR2_MMS_Msk /*!<MMS[2:0] bits (Master Mode Selection) */
-#define TIM_CR2_MMS_0 (0x1U << TIM_CR2_MMS_Pos) /*!< 0x00000010 */
-#define TIM_CR2_MMS_1 (0x2U << TIM_CR2_MMS_Pos) /*!< 0x00000020 */
-#define TIM_CR2_MMS_2 (0x4U << TIM_CR2_MMS_Pos) /*!< 0x00000040 */
-
-#define TIM_CR2_TI1S_Pos (7U)
-#define TIM_CR2_TI1S_Msk (0x1U << TIM_CR2_TI1S_Pos) /*!< 0x00000080 */
-#define TIM_CR2_TI1S TIM_CR2_TI1S_Msk /*!<TI1 Selection */
-#define TIM_CR2_OIS1_Pos (8U)
-#define TIM_CR2_OIS1_Msk (0x1U << TIM_CR2_OIS1_Pos) /*!< 0x00000100 */
-#define TIM_CR2_OIS1 TIM_CR2_OIS1_Msk /*!<Output Idle state 1 (OC1 output) */
-#define TIM_CR2_OIS1N_Pos (9U)
-#define TIM_CR2_OIS1N_Msk (0x1U << TIM_CR2_OIS1N_Pos) /*!< 0x00000200 */
-#define TIM_CR2_OIS1N TIM_CR2_OIS1N_Msk /*!<Output Idle state 1 (OC1N output) */
-#define TIM_CR2_OIS2_Pos (10U)
-#define TIM_CR2_OIS2_Msk (0x1U << TIM_CR2_OIS2_Pos) /*!< 0x00000400 */
-#define TIM_CR2_OIS2 TIM_CR2_OIS2_Msk /*!<Output Idle state 2 (OC2 output) */
-#define TIM_CR2_OIS2N_Pos (11U)
-#define TIM_CR2_OIS2N_Msk (0x1U << TIM_CR2_OIS2N_Pos) /*!< 0x00000800 */
-#define TIM_CR2_OIS2N TIM_CR2_OIS2N_Msk /*!<Output Idle state 2 (OC2N output) */
-#define TIM_CR2_OIS3_Pos (12U)
-#define TIM_CR2_OIS3_Msk (0x1U << TIM_CR2_OIS3_Pos) /*!< 0x00001000 */
-#define TIM_CR2_OIS3 TIM_CR2_OIS3_Msk /*!<Output Idle state 3 (OC3 output) */
-#define TIM_CR2_OIS3N_Pos (13U)
-#define TIM_CR2_OIS3N_Msk (0x1U << TIM_CR2_OIS3N_Pos) /*!< 0x00002000 */
-#define TIM_CR2_OIS3N TIM_CR2_OIS3N_Msk /*!<Output Idle state 3 (OC3N output) */
-#define TIM_CR2_OIS4_Pos (14U)
-#define TIM_CR2_OIS4_Msk (0x1U << TIM_CR2_OIS4_Pos) /*!< 0x00004000 */
-#define TIM_CR2_OIS4 TIM_CR2_OIS4_Msk /*!<Output Idle state 4 (OC4 output) */
-
-/******************* Bit definition for TIM_SMCR register ******************/
-#define TIM_SMCR_SMS_Pos (0U)
-#define TIM_SMCR_SMS_Msk (0x7U << TIM_SMCR_SMS_Pos) /*!< 0x00000007 */
-#define TIM_SMCR_SMS TIM_SMCR_SMS_Msk /*!<SMS[2:0] bits (Slave mode selection) */
-#define TIM_SMCR_SMS_0 (0x1U << TIM_SMCR_SMS_Pos) /*!< 0x00000001 */
-#define TIM_SMCR_SMS_1 (0x2U << TIM_SMCR_SMS_Pos) /*!< 0x00000002 */
-#define TIM_SMCR_SMS_2 (0x4U << TIM_SMCR_SMS_Pos) /*!< 0x00000004 */
-
-#define TIM_SMCR_OCCS_Pos (3U)
-#define TIM_SMCR_OCCS_Msk (0x1U << TIM_SMCR_OCCS_Pos) /*!< 0x00000008 */
-#define TIM_SMCR_OCCS TIM_SMCR_OCCS_Msk /*!< OCREF clear selection */
-
-#define TIM_SMCR_TS_Pos (4U)
-#define TIM_SMCR_TS_Msk (0x7U << TIM_SMCR_TS_Pos) /*!< 0x00000070 */
-#define TIM_SMCR_TS TIM_SMCR_TS_Msk /*!<TS[2:0] bits (Trigger selection) */
-#define TIM_SMCR_TS_0 (0x1U << TIM_SMCR_TS_Pos) /*!< 0x00000010 */
-#define TIM_SMCR_TS_1 (0x2U << TIM_SMCR_TS_Pos) /*!< 0x00000020 */
-#define TIM_SMCR_TS_2 (0x4U << TIM_SMCR_TS_Pos) /*!< 0x00000040 */
-
-#define TIM_SMCR_MSM_Pos (7U)
-#define TIM_SMCR_MSM_Msk (0x1U << TIM_SMCR_MSM_Pos) /*!< 0x00000080 */
-#define TIM_SMCR_MSM TIM_SMCR_MSM_Msk /*!<Master/slave mode */
-
-#define TIM_SMCR_ETF_Pos (8U)
-#define TIM_SMCR_ETF_Msk (0xFU << TIM_SMCR_ETF_Pos) /*!< 0x00000F00 */
-#define TIM_SMCR_ETF TIM_SMCR_ETF_Msk /*!<ETF[3:0] bits (External trigger filter) */
-#define TIM_SMCR_ETF_0 (0x1U << TIM_SMCR_ETF_Pos) /*!< 0x00000100 */
-#define TIM_SMCR_ETF_1 (0x2U << TIM_SMCR_ETF_Pos) /*!< 0x00000200 */
-#define TIM_SMCR_ETF_2 (0x4U << TIM_SMCR_ETF_Pos) /*!< 0x00000400 */
-#define TIM_SMCR_ETF_3 (0x8U << TIM_SMCR_ETF_Pos) /*!< 0x00000800 */
-
-#define TIM_SMCR_ETPS_Pos (12U)
-#define TIM_SMCR_ETPS_Msk (0x3U << TIM_SMCR_ETPS_Pos) /*!< 0x00003000 */
-#define TIM_SMCR_ETPS TIM_SMCR_ETPS_Msk /*!<ETPS[1:0] bits (External trigger prescaler) */
-#define TIM_SMCR_ETPS_0 (0x1U << TIM_SMCR_ETPS_Pos) /*!< 0x00001000 */
-#define TIM_SMCR_ETPS_1 (0x2U << TIM_SMCR_ETPS_Pos) /*!< 0x00002000 */
-
-#define TIM_SMCR_ECE_Pos (14U)
-#define TIM_SMCR_ECE_Msk (0x1U << TIM_SMCR_ECE_Pos) /*!< 0x00004000 */
-#define TIM_SMCR_ECE TIM_SMCR_ECE_Msk /*!<External clock enable */
-#define TIM_SMCR_ETP_Pos (15U)
-#define TIM_SMCR_ETP_Msk (0x1U << TIM_SMCR_ETP_Pos) /*!< 0x00008000 */
-#define TIM_SMCR_ETP TIM_SMCR_ETP_Msk /*!<External trigger polarity */
-
-/******************* Bit definition for TIM_DIER register ******************/
-#define TIM_DIER_UIE_Pos (0U)
-#define TIM_DIER_UIE_Msk (0x1U << TIM_DIER_UIE_Pos) /*!< 0x00000001 */
-#define TIM_DIER_UIE TIM_DIER_UIE_Msk /*!<Update interrupt enable */
-#define TIM_DIER_CC1IE_Pos (1U)
-#define TIM_DIER_CC1IE_Msk (0x1U << TIM_DIER_CC1IE_Pos) /*!< 0x00000002 */
-#define TIM_DIER_CC1IE TIM_DIER_CC1IE_Msk /*!<Capture/Compare 1 interrupt enable */
-#define TIM_DIER_CC2IE_Pos (2U)
-#define TIM_DIER_CC2IE_Msk (0x1U << TIM_DIER_CC2IE_Pos) /*!< 0x00000004 */
-#define TIM_DIER_CC2IE TIM_DIER_CC2IE_Msk /*!<Capture/Compare 2 interrupt enable */
-#define TIM_DIER_CC3IE_Pos (3U)
-#define TIM_DIER_CC3IE_Msk (0x1U << TIM_DIER_CC3IE_Pos) /*!< 0x00000008 */
-#define TIM_DIER_CC3IE TIM_DIER_CC3IE_Msk /*!<Capture/Compare 3 interrupt enable */
-#define TIM_DIER_CC4IE_Pos (4U)
-#define TIM_DIER_CC4IE_Msk (0x1U << TIM_DIER_CC4IE_Pos) /*!< 0x00000010 */
-#define TIM_DIER_CC4IE TIM_DIER_CC4IE_Msk /*!<Capture/Compare 4 interrupt enable */
-#define TIM_DIER_COMIE_Pos (5U)
-#define TIM_DIER_COMIE_Msk (0x1U << TIM_DIER_COMIE_Pos) /*!< 0x00000020 */
-#define TIM_DIER_COMIE TIM_DIER_COMIE_Msk /*!<COM interrupt enable */
-#define TIM_DIER_TIE_Pos (6U)
-#define TIM_DIER_TIE_Msk (0x1U << TIM_DIER_TIE_Pos) /*!< 0x00000040 */
-#define TIM_DIER_TIE TIM_DIER_TIE_Msk /*!<Trigger interrupt enable */
-#define TIM_DIER_BIE_Pos (7U)
-#define TIM_DIER_BIE_Msk (0x1U << TIM_DIER_BIE_Pos) /*!< 0x00000080 */
-#define TIM_DIER_BIE TIM_DIER_BIE_Msk /*!<Break interrupt enable */
-#define TIM_DIER_UDE_Pos (8U)
-#define TIM_DIER_UDE_Msk (0x1U << TIM_DIER_UDE_Pos) /*!< 0x00000100 */
-#define TIM_DIER_UDE TIM_DIER_UDE_Msk /*!<Update DMA request enable */
-#define TIM_DIER_CC1DE_Pos (9U)
-#define TIM_DIER_CC1DE_Msk (0x1U << TIM_DIER_CC1DE_Pos) /*!< 0x00000200 */
-#define TIM_DIER_CC1DE TIM_DIER_CC1DE_Msk /*!<Capture/Compare 1 DMA request enable */
-#define TIM_DIER_CC2DE_Pos (10U)
-#define TIM_DIER_CC2DE_Msk (0x1U << TIM_DIER_CC2DE_Pos) /*!< 0x00000400 */
-#define TIM_DIER_CC2DE TIM_DIER_CC2DE_Msk /*!<Capture/Compare 2 DMA request enable */
-#define TIM_DIER_CC3DE_Pos (11U)
-#define TIM_DIER_CC3DE_Msk (0x1U << TIM_DIER_CC3DE_Pos) /*!< 0x00000800 */
-#define TIM_DIER_CC3DE TIM_DIER_CC3DE_Msk /*!<Capture/Compare 3 DMA request enable */
-#define TIM_DIER_CC4DE_Pos (12U)
-#define TIM_DIER_CC4DE_Msk (0x1U << TIM_DIER_CC4DE_Pos) /*!< 0x00001000 */
-#define TIM_DIER_CC4DE TIM_DIER_CC4DE_Msk /*!<Capture/Compare 4 DMA request enable */
-#define TIM_DIER_COMDE_Pos (13U)
-#define TIM_DIER_COMDE_Msk (0x1U << TIM_DIER_COMDE_Pos) /*!< 0x00002000 */
-#define TIM_DIER_COMDE TIM_DIER_COMDE_Msk /*!<COM DMA request enable */
-#define TIM_DIER_TDE_Pos (14U)
-#define TIM_DIER_TDE_Msk (0x1U << TIM_DIER_TDE_Pos) /*!< 0x00004000 */
-#define TIM_DIER_TDE TIM_DIER_TDE_Msk /*!<Trigger DMA request enable */
-
-/******************** Bit definition for TIM_SR register *******************/
-#define TIM_SR_UIF_Pos (0U)
-#define TIM_SR_UIF_Msk (0x1U << TIM_SR_UIF_Pos) /*!< 0x00000001 */
-#define TIM_SR_UIF TIM_SR_UIF_Msk /*!<Update interrupt Flag */
-#define TIM_SR_CC1IF_Pos (1U)
-#define TIM_SR_CC1IF_Msk (0x1U << TIM_SR_CC1IF_Pos) /*!< 0x00000002 */
-#define TIM_SR_CC1IF TIM_SR_CC1IF_Msk /*!<Capture/Compare 1 interrupt Flag */
-#define TIM_SR_CC2IF_Pos (2U)
-#define TIM_SR_CC2IF_Msk (0x1U << TIM_SR_CC2IF_Pos) /*!< 0x00000004 */
-#define TIM_SR_CC2IF TIM_SR_CC2IF_Msk /*!<Capture/Compare 2 interrupt Flag */
-#define TIM_SR_CC3IF_Pos (3U)
-#define TIM_SR_CC3IF_Msk (0x1U << TIM_SR_CC3IF_Pos) /*!< 0x00000008 */
-#define TIM_SR_CC3IF TIM_SR_CC3IF_Msk /*!<Capture/Compare 3 interrupt Flag */
-#define TIM_SR_CC4IF_Pos (4U)
-#define TIM_SR_CC4IF_Msk (0x1U << TIM_SR_CC4IF_Pos) /*!< 0x00000010 */
-#define TIM_SR_CC4IF TIM_SR_CC4IF_Msk /*!<Capture/Compare 4 interrupt Flag */
-#define TIM_SR_COMIF_Pos (5U)
-#define TIM_SR_COMIF_Msk (0x1U << TIM_SR_COMIF_Pos) /*!< 0x00000020 */
-#define TIM_SR_COMIF TIM_SR_COMIF_Msk /*!<COM interrupt Flag */
-#define TIM_SR_TIF_Pos (6U)
-#define TIM_SR_TIF_Msk (0x1U << TIM_SR_TIF_Pos) /*!< 0x00000040 */
-#define TIM_SR_TIF TIM_SR_TIF_Msk /*!<Trigger interrupt Flag */
-#define TIM_SR_BIF_Pos (7U)
-#define TIM_SR_BIF_Msk (0x1U << TIM_SR_BIF_Pos) /*!< 0x00000080 */
-#define TIM_SR_BIF TIM_SR_BIF_Msk /*!<Break interrupt Flag */
-#define TIM_SR_CC1OF_Pos (9U)
-#define TIM_SR_CC1OF_Msk (0x1U << TIM_SR_CC1OF_Pos) /*!< 0x00000200 */
-#define TIM_SR_CC1OF TIM_SR_CC1OF_Msk /*!<Capture/Compare 1 Overcapture Flag */
-#define TIM_SR_CC2OF_Pos (10U)
-#define TIM_SR_CC2OF_Msk (0x1U << TIM_SR_CC2OF_Pos) /*!< 0x00000400 */
-#define TIM_SR_CC2OF TIM_SR_CC2OF_Msk /*!<Capture/Compare 2 Overcapture Flag */
-#define TIM_SR_CC3OF_Pos (11U)
-#define TIM_SR_CC3OF_Msk (0x1U << TIM_SR_CC3OF_Pos) /*!< 0x00000800 */
-#define TIM_SR_CC3OF TIM_SR_CC3OF_Msk /*!<Capture/Compare 3 Overcapture Flag */
-#define TIM_SR_CC4OF_Pos (12U)
-#define TIM_SR_CC4OF_Msk (0x1U << TIM_SR_CC4OF_Pos) /*!< 0x00001000 */
-#define TIM_SR_CC4OF TIM_SR_CC4OF_Msk /*!<Capture/Compare 4 Overcapture Flag */
-
-/******************* Bit definition for TIM_EGR register *******************/
-#define TIM_EGR_UG_Pos (0U)
-#define TIM_EGR_UG_Msk (0x1U << TIM_EGR_UG_Pos) /*!< 0x00000001 */
-#define TIM_EGR_UG TIM_EGR_UG_Msk /*!<Update Generation */
-#define TIM_EGR_CC1G_Pos (1U)
-#define TIM_EGR_CC1G_Msk (0x1U << TIM_EGR_CC1G_Pos) /*!< 0x00000002 */
-#define TIM_EGR_CC1G TIM_EGR_CC1G_Msk /*!<Capture/Compare 1 Generation */
-#define TIM_EGR_CC2G_Pos (2U)
-#define TIM_EGR_CC2G_Msk (0x1U << TIM_EGR_CC2G_Pos) /*!< 0x00000004 */
-#define TIM_EGR_CC2G TIM_EGR_CC2G_Msk /*!<Capture/Compare 2 Generation */
-#define TIM_EGR_CC3G_Pos (3U)
-#define TIM_EGR_CC3G_Msk (0x1U << TIM_EGR_CC3G_Pos) /*!< 0x00000008 */
-#define TIM_EGR_CC3G TIM_EGR_CC3G_Msk /*!<Capture/Compare 3 Generation */
-#define TIM_EGR_CC4G_Pos (4U)
-#define TIM_EGR_CC4G_Msk (0x1U << TIM_EGR_CC4G_Pos) /*!< 0x00000010 */
-#define TIM_EGR_CC4G TIM_EGR_CC4G_Msk /*!<Capture/Compare 4 Generation */
-#define TIM_EGR_COMG_Pos (5U)
-#define TIM_EGR_COMG_Msk (0x1U << TIM_EGR_COMG_Pos) /*!< 0x00000020 */
-#define TIM_EGR_COMG TIM_EGR_COMG_Msk /*!<Capture/Compare Control Update Generation */
-#define TIM_EGR_TG_Pos (6U)
-#define TIM_EGR_TG_Msk (0x1U << TIM_EGR_TG_Pos) /*!< 0x00000040 */
-#define TIM_EGR_TG TIM_EGR_TG_Msk /*!<Trigger Generation */
-#define TIM_EGR_BG_Pos (7U)
-#define TIM_EGR_BG_Msk (0x1U << TIM_EGR_BG_Pos) /*!< 0x00000080 */
-#define TIM_EGR_BG TIM_EGR_BG_Msk /*!<Break Generation */
-
-/****************** Bit definition for TIM_CCMR1 register ******************/
-#define TIM_CCMR1_CC1S_Pos (0U)
-#define TIM_CCMR1_CC1S_Msk (0x3U << TIM_CCMR1_CC1S_Pos) /*!< 0x00000003 */
-#define TIM_CCMR1_CC1S TIM_CCMR1_CC1S_Msk /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
-#define TIM_CCMR1_CC1S_0 (0x1U << TIM_CCMR1_CC1S_Pos) /*!< 0x00000001 */
-#define TIM_CCMR1_CC1S_1 (0x2U << TIM_CCMR1_CC1S_Pos) /*!< 0x00000002 */
-
-#define TIM_CCMR1_OC1FE_Pos (2U)
-#define TIM_CCMR1_OC1FE_Msk (0x1U << TIM_CCMR1_OC1FE_Pos) /*!< 0x00000004 */
-#define TIM_CCMR1_OC1FE TIM_CCMR1_OC1FE_Msk /*!<Output Compare 1 Fast enable */
-#define TIM_CCMR1_OC1PE_Pos (3U)
-#define TIM_CCMR1_OC1PE_Msk (0x1U << TIM_CCMR1_OC1PE_Pos) /*!< 0x00000008 */
-#define TIM_CCMR1_OC1PE TIM_CCMR1_OC1PE_Msk /*!<Output Compare 1 Preload enable */
-
-#define TIM_CCMR1_OC1M_Pos (4U)
-#define TIM_CCMR1_OC1M_Msk (0x7U << TIM_CCMR1_OC1M_Pos) /*!< 0x00000070 */
-#define TIM_CCMR1_OC1M TIM_CCMR1_OC1M_Msk /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
-#define TIM_CCMR1_OC1M_0 (0x1U << TIM_CCMR1_OC1M_Pos) /*!< 0x00000010 */
-#define TIM_CCMR1_OC1M_1 (0x2U << TIM_CCMR1_OC1M_Pos) /*!< 0x00000020 */
-#define TIM_CCMR1_OC1M_2 (0x4U << TIM_CCMR1_OC1M_Pos) /*!< 0x00000040 */
-
-#define TIM_CCMR1_OC1CE_Pos (7U)
-#define TIM_CCMR1_OC1CE_Msk (0x1U << TIM_CCMR1_OC1CE_Pos) /*!< 0x00000080 */
-#define TIM_CCMR1_OC1CE TIM_CCMR1_OC1CE_Msk /*!<Output Compare 1Clear Enable */
-
-#define TIM_CCMR1_CC2S_Pos (8U)
-#define TIM_CCMR1_CC2S_Msk (0x3U << TIM_CCMR1_CC2S_Pos) /*!< 0x00000300 */
-#define TIM_CCMR1_CC2S TIM_CCMR1_CC2S_Msk /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
-#define TIM_CCMR1_CC2S_0 (0x1U << TIM_CCMR1_CC2S_Pos) /*!< 0x00000100 */
-#define TIM_CCMR1_CC2S_1 (0x2U << TIM_CCMR1_CC2S_Pos) /*!< 0x00000200 */
-
-#define TIM_CCMR1_OC2FE_Pos (10U)
-#define TIM_CCMR1_OC2FE_Msk (0x1U << TIM_CCMR1_OC2FE_Pos) /*!< 0x00000400 */
-#define TIM_CCMR1_OC2FE TIM_CCMR1_OC2FE_Msk /*!<Output Compare 2 Fast enable */
-#define TIM_CCMR1_OC2PE_Pos (11U)
-#define TIM_CCMR1_OC2PE_Msk (0x1U << TIM_CCMR1_OC2PE_Pos) /*!< 0x00000800 */
-#define TIM_CCMR1_OC2PE TIM_CCMR1_OC2PE_Msk /*!<Output Compare 2 Preload enable */
-
-#define TIM_CCMR1_OC2M_Pos (12U)
-#define TIM_CCMR1_OC2M_Msk (0x7U << TIM_CCMR1_OC2M_Pos) /*!< 0x00007000 */
-#define TIM_CCMR1_OC2M TIM_CCMR1_OC2M_Msk /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
-#define TIM_CCMR1_OC2M_0 (0x1U << TIM_CCMR1_OC2M_Pos) /*!< 0x00001000 */
-#define TIM_CCMR1_OC2M_1 (0x2U << TIM_CCMR1_OC2M_Pos) /*!< 0x00002000 */
-#define TIM_CCMR1_OC2M_2 (0x4U << TIM_CCMR1_OC2M_Pos) /*!< 0x00004000 */
-
-#define TIM_CCMR1_OC2CE_Pos (15U)
-#define TIM_CCMR1_OC2CE_Msk (0x1U << TIM_CCMR1_OC2CE_Pos) /*!< 0x00008000 */
-#define TIM_CCMR1_OC2CE TIM_CCMR1_OC2CE_Msk /*!<Output Compare 2 Clear Enable */
-
-/*---------------------------------------------------------------------------*/
-
-#define TIM_CCMR1_IC1PSC_Pos (2U)
-#define TIM_CCMR1_IC1PSC_Msk (0x3U << TIM_CCMR1_IC1PSC_Pos) /*!< 0x0000000C */
-#define TIM_CCMR1_IC1PSC TIM_CCMR1_IC1PSC_Msk /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
-#define TIM_CCMR1_IC1PSC_0 (0x1U << TIM_CCMR1_IC1PSC_Pos) /*!< 0x00000004 */
-#define TIM_CCMR1_IC1PSC_1 (0x2U << TIM_CCMR1_IC1PSC_Pos) /*!< 0x00000008 */
-
-#define TIM_CCMR1_IC1F_Pos (4U)
-#define TIM_CCMR1_IC1F_Msk (0xFU << TIM_CCMR1_IC1F_Pos) /*!< 0x000000F0 */
-#define TIM_CCMR1_IC1F TIM_CCMR1_IC1F_Msk /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
-#define TIM_CCMR1_IC1F_0 (0x1U << TIM_CCMR1_IC1F_Pos) /*!< 0x00000010 */
-#define TIM_CCMR1_IC1F_1 (0x2U << TIM_CCMR1_IC1F_Pos) /*!< 0x00000020 */
-#define TIM_CCMR1_IC1F_2 (0x4U << TIM_CCMR1_IC1F_Pos) /*!< 0x00000040 */
-#define TIM_CCMR1_IC1F_3 (0x8U << TIM_CCMR1_IC1F_Pos) /*!< 0x00000080 */
-
-#define TIM_CCMR1_IC2PSC_Pos (10U)
-#define TIM_CCMR1_IC2PSC_Msk (0x3U << TIM_CCMR1_IC2PSC_Pos) /*!< 0x00000C00 */
-#define TIM_CCMR1_IC2PSC TIM_CCMR1_IC2PSC_Msk /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
-#define TIM_CCMR1_IC2PSC_0 (0x1U << TIM_CCMR1_IC2PSC_Pos) /*!< 0x00000400 */
-#define TIM_CCMR1_IC2PSC_1 (0x2U << TIM_CCMR1_IC2PSC_Pos) /*!< 0x00000800 */
-
-#define TIM_CCMR1_IC2F_Pos (12U)
-#define TIM_CCMR1_IC2F_Msk (0xFU << TIM_CCMR1_IC2F_Pos) /*!< 0x0000F000 */
-#define TIM_CCMR1_IC2F TIM_CCMR1_IC2F_Msk /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
-#define TIM_CCMR1_IC2F_0 (0x1U << TIM_CCMR1_IC2F_Pos) /*!< 0x00001000 */
-#define TIM_CCMR1_IC2F_1 (0x2U << TIM_CCMR1_IC2F_Pos) /*!< 0x00002000 */
-#define TIM_CCMR1_IC2F_2 (0x4U << TIM_CCMR1_IC2F_Pos) /*!< 0x00004000 */
-#define TIM_CCMR1_IC2F_3 (0x8U << TIM_CCMR1_IC2F_Pos) /*!< 0x00008000 */
-
-/****************** Bit definition for TIM_CCMR2 register ******************/
-#define TIM_CCMR2_CC3S_Pos (0U)
-#define TIM_CCMR2_CC3S_Msk (0x3U << TIM_CCMR2_CC3S_Pos) /*!< 0x00000003 */
-#define TIM_CCMR2_CC3S TIM_CCMR2_CC3S_Msk /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
-#define TIM_CCMR2_CC3S_0 (0x1U << TIM_CCMR2_CC3S_Pos) /*!< 0x00000001 */
-#define TIM_CCMR2_CC3S_1 (0x2U << TIM_CCMR2_CC3S_Pos) /*!< 0x00000002 */
-
-#define TIM_CCMR2_OC3FE_Pos (2U)
-#define TIM_CCMR2_OC3FE_Msk (0x1U << TIM_CCMR2_OC3FE_Pos) /*!< 0x00000004 */
-#define TIM_CCMR2_OC3FE TIM_CCMR2_OC3FE_Msk /*!<Output Compare 3 Fast enable */
-#define TIM_CCMR2_OC3PE_Pos (3U)
-#define TIM_CCMR2_OC3PE_Msk (0x1U << TIM_CCMR2_OC3PE_Pos) /*!< 0x00000008 */
-#define TIM_CCMR2_OC3PE TIM_CCMR2_OC3PE_Msk /*!<Output Compare 3 Preload enable */
-
-#define TIM_CCMR2_OC3M_Pos (4U)
-#define TIM_CCMR2_OC3M_Msk (0x7U << TIM_CCMR2_OC3M_Pos) /*!< 0x00000070 */
-#define TIM_CCMR2_OC3M TIM_CCMR2_OC3M_Msk /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
-#define TIM_CCMR2_OC3M_0 (0x1U << TIM_CCMR2_OC3M_Pos) /*!< 0x00000010 */
-#define TIM_CCMR2_OC3M_1 (0x2U << TIM_CCMR2_OC3M_Pos) /*!< 0x00000020 */
-#define TIM_CCMR2_OC3M_2 (0x4U << TIM_CCMR2_OC3M_Pos) /*!< 0x00000040 */
-
-#define TIM_CCMR2_OC3CE_Pos (7U)
-#define TIM_CCMR2_OC3CE_Msk (0x1U << TIM_CCMR2_OC3CE_Pos) /*!< 0x00000080 */
-#define TIM_CCMR2_OC3CE TIM_CCMR2_OC3CE_Msk /*!<Output Compare 3 Clear Enable */
-
-#define TIM_CCMR2_CC4S_Pos (8U)
-#define TIM_CCMR2_CC4S_Msk (0x3U << TIM_CCMR2_CC4S_Pos) /*!< 0x00000300 */
-#define TIM_CCMR2_CC4S TIM_CCMR2_CC4S_Msk /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
-#define TIM_CCMR2_CC4S_0 (0x1U << TIM_CCMR2_CC4S_Pos) /*!< 0x00000100 */
-#define TIM_CCMR2_CC4S_1 (0x2U << TIM_CCMR2_CC4S_Pos) /*!< 0x00000200 */
-
-#define TIM_CCMR2_OC4FE_Pos (10U)
-#define TIM_CCMR2_OC4FE_Msk (0x1U << TIM_CCMR2_OC4FE_Pos) /*!< 0x00000400 */
-#define TIM_CCMR2_OC4FE TIM_CCMR2_OC4FE_Msk /*!<Output Compare 4 Fast enable */
-#define TIM_CCMR2_OC4PE_Pos (11U)
-#define TIM_CCMR2_OC4PE_Msk (0x1U << TIM_CCMR2_OC4PE_Pos) /*!< 0x00000800 */
-#define TIM_CCMR2_OC4PE TIM_CCMR2_OC4PE_Msk /*!<Output Compare 4 Preload enable */
-
-#define TIM_CCMR2_OC4M_Pos (12U)
-#define TIM_CCMR2_OC4M_Msk (0x7U << TIM_CCMR2_OC4M_Pos) /*!< 0x00007000 */
-#define TIM_CCMR2_OC4M TIM_CCMR2_OC4M_Msk /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
-#define TIM_CCMR2_OC4M_0 (0x1U << TIM_CCMR2_OC4M_Pos) /*!< 0x00001000 */
-#define TIM_CCMR2_OC4M_1 (0x2U << TIM_CCMR2_OC4M_Pos) /*!< 0x00002000 */
-#define TIM_CCMR2_OC4M_2 (0x4U << TIM_CCMR2_OC4M_Pos) /*!< 0x00004000 */
-
-#define TIM_CCMR2_OC4CE_Pos (15U)
-#define TIM_CCMR2_OC4CE_Msk (0x1U << TIM_CCMR2_OC4CE_Pos) /*!< 0x00008000 */
-#define TIM_CCMR2_OC4CE TIM_CCMR2_OC4CE_Msk /*!<Output Compare 4 Clear Enable */
-
-/*---------------------------------------------------------------------------*/
-
-#define TIM_CCMR2_IC3PSC_Pos (2U)
-#define TIM_CCMR2_IC3PSC_Msk (0x3U << TIM_CCMR2_IC3PSC_Pos) /*!< 0x0000000C */
-#define TIM_CCMR2_IC3PSC TIM_CCMR2_IC3PSC_Msk /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
-#define TIM_CCMR2_IC3PSC_0 (0x1U << TIM_CCMR2_IC3PSC_Pos) /*!< 0x00000004 */
-#define TIM_CCMR2_IC3PSC_1 (0x2U << TIM_CCMR2_IC3PSC_Pos) /*!< 0x00000008 */
-
-#define TIM_CCMR2_IC3F_Pos (4U)
-#define TIM_CCMR2_IC3F_Msk (0xFU << TIM_CCMR2_IC3F_Pos) /*!< 0x000000F0 */
-#define TIM_CCMR2_IC3F TIM_CCMR2_IC3F_Msk /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
-#define TIM_CCMR2_IC3F_0 (0x1U << TIM_CCMR2_IC3F_Pos) /*!< 0x00000010 */
-#define TIM_CCMR2_IC3F_1 (0x2U << TIM_CCMR2_IC3F_Pos) /*!< 0x00000020 */
-#define TIM_CCMR2_IC3F_2 (0x4U << TIM_CCMR2_IC3F_Pos) /*!< 0x00000040 */
-#define TIM_CCMR2_IC3F_3 (0x8U << TIM_CCMR2_IC3F_Pos) /*!< 0x00000080 */
-
-#define TIM_CCMR2_IC4PSC_Pos (10U)
-#define TIM_CCMR2_IC4PSC_Msk (0x3U << TIM_CCMR2_IC4PSC_Pos) /*!< 0x00000C00 */
-#define TIM_CCMR2_IC4PSC TIM_CCMR2_IC4PSC_Msk /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
-#define TIM_CCMR2_IC4PSC_0 (0x1U << TIM_CCMR2_IC4PSC_Pos) /*!< 0x00000400 */
-#define TIM_CCMR2_IC4PSC_1 (0x2U << TIM_CCMR2_IC4PSC_Pos) /*!< 0x00000800 */
-
-#define TIM_CCMR2_IC4F_Pos (12U)
-#define TIM_CCMR2_IC4F_Msk (0xFU << TIM_CCMR2_IC4F_Pos) /*!< 0x0000F000 */
-#define TIM_CCMR2_IC4F TIM_CCMR2_IC4F_Msk /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
-#define TIM_CCMR2_IC4F_0 (0x1U << TIM_CCMR2_IC4F_Pos) /*!< 0x00001000 */
-#define TIM_CCMR2_IC4F_1 (0x2U << TIM_CCMR2_IC4F_Pos) /*!< 0x00002000 */
-#define TIM_CCMR2_IC4F_2 (0x4U << TIM_CCMR2_IC4F_Pos) /*!< 0x00004000 */
-#define TIM_CCMR2_IC4F_3 (0x8U << TIM_CCMR2_IC4F_Pos) /*!< 0x00008000 */
-
-/******************* Bit definition for TIM_CCER register ******************/
-#define TIM_CCER_CC1E_Pos (0U)
-#define TIM_CCER_CC1E_Msk (0x1U << TIM_CCER_CC1E_Pos) /*!< 0x00000001 */
-#define TIM_CCER_CC1E TIM_CCER_CC1E_Msk /*!<Capture/Compare 1 output enable */
-#define TIM_CCER_CC1P_Pos (1U)
-#define TIM_CCER_CC1P_Msk (0x1U << TIM_CCER_CC1P_Pos) /*!< 0x00000002 */
-#define TIM_CCER_CC1P TIM_CCER_CC1P_Msk /*!<Capture/Compare 1 output Polarity */
-#define TIM_CCER_CC1NE_Pos (2U)
-#define TIM_CCER_CC1NE_Msk (0x1U << TIM_CCER_CC1NE_Pos) /*!< 0x00000004 */
-#define TIM_CCER_CC1NE TIM_CCER_CC1NE_Msk /*!<Capture/Compare 1 Complementary output enable */
-#define TIM_CCER_CC1NP_Pos (3U)
-#define TIM_CCER_CC1NP_Msk (0x1U << TIM_CCER_CC1NP_Pos) /*!< 0x00000008 */
-#define TIM_CCER_CC1NP TIM_CCER_CC1NP_Msk /*!<Capture/Compare 1 Complementary output Polarity */
-#define TIM_CCER_CC2E_Pos (4U)
-#define TIM_CCER_CC2E_Msk (0x1U << TIM_CCER_CC2E_Pos) /*!< 0x00000010 */
-#define TIM_CCER_CC2E TIM_CCER_CC2E_Msk /*!<Capture/Compare 2 output enable */
-#define TIM_CCER_CC2P_Pos (5U)
-#define TIM_CCER_CC2P_Msk (0x1U << TIM_CCER_CC2P_Pos) /*!< 0x00000020 */
-#define TIM_CCER_CC2P TIM_CCER_CC2P_Msk /*!<Capture/Compare 2 output Polarity */
-#define TIM_CCER_CC2NE_Pos (6U)
-#define TIM_CCER_CC2NE_Msk (0x1U << TIM_CCER_CC2NE_Pos) /*!< 0x00000040 */
-#define TIM_CCER_CC2NE TIM_CCER_CC2NE_Msk /*!<Capture/Compare 2 Complementary output enable */
-#define TIM_CCER_CC2NP_Pos (7U)
-#define TIM_CCER_CC2NP_Msk (0x1U << TIM_CCER_CC2NP_Pos) /*!< 0x00000080 */
-#define TIM_CCER_CC2NP TIM_CCER_CC2NP_Msk /*!<Capture/Compare 2 Complementary output Polarity */
-#define TIM_CCER_CC3E_Pos (8U)
-#define TIM_CCER_CC3E_Msk (0x1U << TIM_CCER_CC3E_Pos) /*!< 0x00000100 */
-#define TIM_CCER_CC3E TIM_CCER_CC3E_Msk /*!<Capture/Compare 3 output enable */
-#define TIM_CCER_CC3P_Pos (9U)
-#define TIM_CCER_CC3P_Msk (0x1U << TIM_CCER_CC3P_Pos) /*!< 0x00000200 */
-#define TIM_CCER_CC3P TIM_CCER_CC3P_Msk /*!<Capture/Compare 3 output Polarity */
-#define TIM_CCER_CC3NE_Pos (10U)
-#define TIM_CCER_CC3NE_Msk (0x1U << TIM_CCER_CC3NE_Pos) /*!< 0x00000400 */
-#define TIM_CCER_CC3NE TIM_CCER_CC3NE_Msk /*!<Capture/Compare 3 Complementary output enable */
-#define TIM_CCER_CC3NP_Pos (11U)
-#define TIM_CCER_CC3NP_Msk (0x1U << TIM_CCER_CC3NP_Pos) /*!< 0x00000800 */
-#define TIM_CCER_CC3NP TIM_CCER_CC3NP_Msk /*!<Capture/Compare 3 Complementary output Polarity */
-#define TIM_CCER_CC4E_Pos (12U)
-#define TIM_CCER_CC4E_Msk (0x1U << TIM_CCER_CC4E_Pos) /*!< 0x00001000 */
-#define TIM_CCER_CC4E TIM_CCER_CC4E_Msk /*!<Capture/Compare 4 output enable */
-#define TIM_CCER_CC4P_Pos (13U)
-#define TIM_CCER_CC4P_Msk (0x1U << TIM_CCER_CC4P_Pos) /*!< 0x00002000 */
-#define TIM_CCER_CC4P TIM_CCER_CC4P_Msk /*!<Capture/Compare 4 output Polarity */
-#define TIM_CCER_CC4NP_Pos (15U)
-#define TIM_CCER_CC4NP_Msk (0x1U << TIM_CCER_CC4NP_Pos) /*!< 0x00008000 */
-#define TIM_CCER_CC4NP TIM_CCER_CC4NP_Msk /*!<Capture/Compare 4 Complementary output Polarity */
-
-/******************* Bit definition for TIM_CNT register *******************/
-#define TIM_CNT_CNT_Pos (0U)
-#define TIM_CNT_CNT_Msk (0xFFFFFFFFU << TIM_CNT_CNT_Pos) /*!< 0xFFFFFFFF */
-#define TIM_CNT_CNT TIM_CNT_CNT_Msk /*!<Counter Value */
-
-/******************* Bit definition for TIM_PSC register *******************/
-#define TIM_PSC_PSC_Pos (0U)
-#define TIM_PSC_PSC_Msk (0xFFFFU << TIM_PSC_PSC_Pos) /*!< 0x0000FFFF */
-#define TIM_PSC_PSC TIM_PSC_PSC_Msk /*!<Prescaler Value */
-
-/******************* Bit definition for TIM_ARR register *******************/
-#define TIM_ARR_ARR_Pos (0U)
-#define TIM_ARR_ARR_Msk (0xFFFFFFFFU << TIM_ARR_ARR_Pos) /*!< 0xFFFFFFFF */
-#define TIM_ARR_ARR TIM_ARR_ARR_Msk /*!<actual auto-reload Value */
-
-/******************* Bit definition for TIM_RCR register *******************/
-#define TIM_RCR_REP_Pos (0U)
-#define TIM_RCR_REP_Msk (0xFFU << TIM_RCR_REP_Pos) /*!< 0x000000FF */
-#define TIM_RCR_REP TIM_RCR_REP_Msk /*!<Repetition Counter Value */
-
-/******************* Bit definition for TIM_CCR1 register ******************/
-#define TIM_CCR1_CCR1_Pos (0U)
-#define TIM_CCR1_CCR1_Msk (0xFFFFU << TIM_CCR1_CCR1_Pos) /*!< 0x0000FFFF */
-#define TIM_CCR1_CCR1 TIM_CCR1_CCR1_Msk /*!<Capture/Compare 1 Value */
-
-/******************* Bit definition for TIM_CCR2 register ******************/
-#define TIM_CCR2_CCR2_Pos (0U)
-#define TIM_CCR2_CCR2_Msk (0xFFFFU << TIM_CCR2_CCR2_Pos) /*!< 0x0000FFFF */
-#define TIM_CCR2_CCR2 TIM_CCR2_CCR2_Msk /*!<Capture/Compare 2 Value */
-
-/******************* Bit definition for TIM_CCR3 register ******************/
-#define TIM_CCR3_CCR3_Pos (0U)
-#define TIM_CCR3_CCR3_Msk (0xFFFFU << TIM_CCR3_CCR3_Pos) /*!< 0x0000FFFF */
-#define TIM_CCR3_CCR3 TIM_CCR3_CCR3_Msk /*!<Capture/Compare 3 Value */
-
-/******************* Bit definition for TIM_CCR4 register ******************/
-#define TIM_CCR4_CCR4_Pos (0U)
-#define TIM_CCR4_CCR4_Msk (0xFFFFU << TIM_CCR4_CCR4_Pos) /*!< 0x0000FFFF */
-#define TIM_CCR4_CCR4 TIM_CCR4_CCR4_Msk /*!<Capture/Compare 4 Value */
-
-/******************* Bit definition for TIM_BDTR register ******************/
-#define TIM_BDTR_DTG_Pos (0U)
-#define TIM_BDTR_DTG_Msk (0xFFU << TIM_BDTR_DTG_Pos) /*!< 0x000000FF */
-#define TIM_BDTR_DTG TIM_BDTR_DTG_Msk /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
-#define TIM_BDTR_DTG_0 (0x01U << TIM_BDTR_DTG_Pos) /*!< 0x00000001 */
-#define TIM_BDTR_DTG_1 (0x02U << TIM_BDTR_DTG_Pos) /*!< 0x00000002 */
-#define TIM_BDTR_DTG_2 (0x04U << TIM_BDTR_DTG_Pos) /*!< 0x00000004 */
-#define TIM_BDTR_DTG_3 (0x08U << TIM_BDTR_DTG_Pos) /*!< 0x00000008 */
-#define TIM_BDTR_DTG_4 (0x10U << TIM_BDTR_DTG_Pos) /*!< 0x00000010 */
-#define TIM_BDTR_DTG_5 (0x20U << TIM_BDTR_DTG_Pos) /*!< 0x00000020 */
-#define TIM_BDTR_DTG_6 (0x40U << TIM_BDTR_DTG_Pos) /*!< 0x00000040 */
-#define TIM_BDTR_DTG_7 (0x80U << TIM_BDTR_DTG_Pos) /*!< 0x00000080 */
-
-#define TIM_BDTR_LOCK_Pos (8U)
-#define TIM_BDTR_LOCK_Msk (0x3U << TIM_BDTR_LOCK_Pos) /*!< 0x00000300 */
-#define TIM_BDTR_LOCK TIM_BDTR_LOCK_Msk /*!<LOCK[1:0] bits (Lock Configuration) */
-#define TIM_BDTR_LOCK_0 (0x1U << TIM_BDTR_LOCK_Pos) /*!< 0x00000100 */
-#define TIM_BDTR_LOCK_1 (0x2U << TIM_BDTR_LOCK_Pos) /*!< 0x00000200 */
-
-#define TIM_BDTR_OSSI_Pos (10U)
-#define TIM_BDTR_OSSI_Msk (0x1U << TIM_BDTR_OSSI_Pos) /*!< 0x00000400 */
-#define TIM_BDTR_OSSI TIM_BDTR_OSSI_Msk /*!<Off-State Selection for Idle mode */
-#define TIM_BDTR_OSSR_Pos (11U)
-#define TIM_BDTR_OSSR_Msk (0x1U << TIM_BDTR_OSSR_Pos) /*!< 0x00000800 */
-#define TIM_BDTR_OSSR TIM_BDTR_OSSR_Msk /*!<Off-State Selection for Run mode */
-#define TIM_BDTR_BKE_Pos (12U)
-#define TIM_BDTR_BKE_Msk (0x1U << TIM_BDTR_BKE_Pos) /*!< 0x00001000 */
-#define TIM_BDTR_BKE TIM_BDTR_BKE_Msk /*!<Break enable */
-#define TIM_BDTR_BKP_Pos (13U)
-#define TIM_BDTR_BKP_Msk (0x1U << TIM_BDTR_BKP_Pos) /*!< 0x00002000 */
-#define TIM_BDTR_BKP TIM_BDTR_BKP_Msk /*!<Break Polarity */
-#define TIM_BDTR_AOE_Pos (14U)
-#define TIM_BDTR_AOE_Msk (0x1U << TIM_BDTR_AOE_Pos) /*!< 0x00004000 */
-#define TIM_BDTR_AOE TIM_BDTR_AOE_Msk /*!<Automatic Output enable */
-#define TIM_BDTR_MOE_Pos (15U)
-#define TIM_BDTR_MOE_Msk (0x1U << TIM_BDTR_MOE_Pos) /*!< 0x00008000 */
-#define TIM_BDTR_MOE TIM_BDTR_MOE_Msk /*!<Main Output enable */
-
-/******************* Bit definition for TIM_DCR register *******************/
-#define TIM_DCR_DBA_Pos (0U)
-#define TIM_DCR_DBA_Msk (0x1FU << TIM_DCR_DBA_Pos) /*!< 0x0000001F */
-#define TIM_DCR_DBA TIM_DCR_DBA_Msk /*!<DBA[4:0] bits (DMA Base Address) */
-#define TIM_DCR_DBA_0 (0x01U << TIM_DCR_DBA_Pos) /*!< 0x00000001 */
-#define TIM_DCR_DBA_1 (0x02U << TIM_DCR_DBA_Pos) /*!< 0x00000002 */
-#define TIM_DCR_DBA_2 (0x04U << TIM_DCR_DBA_Pos) /*!< 0x00000004 */
-#define TIM_DCR_DBA_3 (0x08U << TIM_DCR_DBA_Pos) /*!< 0x00000008 */
-#define TIM_DCR_DBA_4 (0x10U << TIM_DCR_DBA_Pos) /*!< 0x00000010 */
-
-#define TIM_DCR_DBL_Pos (8U)
-#define TIM_DCR_DBL_Msk (0x1FU << TIM_DCR_DBL_Pos) /*!< 0x00001F00 */
-#define TIM_DCR_DBL TIM_DCR_DBL_Msk /*!<DBL[4:0] bits (DMA Burst Length) */
-#define TIM_DCR_DBL_0 (0x01U << TIM_DCR_DBL_Pos) /*!< 0x00000100 */
-#define TIM_DCR_DBL_1 (0x02U << TIM_DCR_DBL_Pos) /*!< 0x00000200 */
-#define TIM_DCR_DBL_2 (0x04U << TIM_DCR_DBL_Pos) /*!< 0x00000400 */
-#define TIM_DCR_DBL_3 (0x08U << TIM_DCR_DBL_Pos) /*!< 0x00000800 */
-#define TIM_DCR_DBL_4 (0x10U << TIM_DCR_DBL_Pos) /*!< 0x00001000 */
-
-/******************* Bit definition for TIM_DMAR register ******************/
-#define TIM_DMAR_DMAB_Pos (0U)
-#define TIM_DMAR_DMAB_Msk (0xFFFFU << TIM_DMAR_DMAB_Pos) /*!< 0x0000FFFF */
-#define TIM_DMAR_DMAB TIM_DMAR_DMAB_Msk /*!<DMA register for burst accesses */
-
-/******************* Bit definition for TIM_OR register ********************/
-
-/******************************************************************************/
-/* */
-/* Real-Time Clock */
-/* */
-/******************************************************************************/
-
-/******************* Bit definition for RTC_CRH register ********************/
-#define RTC_CRH_SECIE_Pos (0U)
-#define RTC_CRH_SECIE_Msk (0x1U << RTC_CRH_SECIE_Pos) /*!< 0x00000001 */
-#define RTC_CRH_SECIE RTC_CRH_SECIE_Msk /*!< Second Interrupt Enable */
-#define RTC_CRH_ALRIE_Pos (1U)
-#define RTC_CRH_ALRIE_Msk (0x1U << RTC_CRH_ALRIE_Pos) /*!< 0x00000002 */
-#define RTC_CRH_ALRIE RTC_CRH_ALRIE_Msk /*!< Alarm Interrupt Enable */
-#define RTC_CRH_OWIE_Pos (2U)
-#define RTC_CRH_OWIE_Msk (0x1U << RTC_CRH_OWIE_Pos) /*!< 0x00000004 */
-#define RTC_CRH_OWIE RTC_CRH_OWIE_Msk /*!< OverfloW Interrupt Enable */
-
-/******************* Bit definition for RTC_CRL register ********************/
-#define RTC_CRL_SECF_Pos (0U)
-#define RTC_CRL_SECF_Msk (0x1U << RTC_CRL_SECF_Pos) /*!< 0x00000001 */
-#define RTC_CRL_SECF RTC_CRL_SECF_Msk /*!< Second Flag */
-#define RTC_CRL_ALRF_Pos (1U)
-#define RTC_CRL_ALRF_Msk (0x1U << RTC_CRL_ALRF_Pos) /*!< 0x00000002 */
-#define RTC_CRL_ALRF RTC_CRL_ALRF_Msk /*!< Alarm Flag */
-#define RTC_CRL_OWF_Pos (2U)
-#define RTC_CRL_OWF_Msk (0x1U << RTC_CRL_OWF_Pos) /*!< 0x00000004 */
-#define RTC_CRL_OWF RTC_CRL_OWF_Msk /*!< OverfloW Flag */
-#define RTC_CRL_RSF_Pos (3U)
-#define RTC_CRL_RSF_Msk (0x1U << RTC_CRL_RSF_Pos) /*!< 0x00000008 */
-#define RTC_CRL_RSF RTC_CRL_RSF_Msk /*!< Registers Synchronized Flag */
-#define RTC_CRL_CNF_Pos (4U)
-#define RTC_CRL_CNF_Msk (0x1U << RTC_CRL_CNF_Pos) /*!< 0x00000010 */
-#define RTC_CRL_CNF RTC_CRL_CNF_Msk /*!< Configuration Flag */
-#define RTC_CRL_RTOFF_Pos (5U)
-#define RTC_CRL_RTOFF_Msk (0x1U << RTC_CRL_RTOFF_Pos) /*!< 0x00000020 */
-#define RTC_CRL_RTOFF RTC_CRL_RTOFF_Msk /*!< RTC operation OFF */
-
-/******************* Bit definition for RTC_PRLH register *******************/
-#define RTC_PRLH_PRL_Pos (0U)
-#define RTC_PRLH_PRL_Msk (0xFU << RTC_PRLH_PRL_Pos) /*!< 0x0000000F */
-#define RTC_PRLH_PRL RTC_PRLH_PRL_Msk /*!< RTC Prescaler Reload Value High */
-
-/******************* Bit definition for RTC_PRLL register *******************/
-#define RTC_PRLL_PRL_Pos (0U)
-#define RTC_PRLL_PRL_Msk (0xFFFFU << RTC_PRLL_PRL_Pos) /*!< 0x0000FFFF */
-#define RTC_PRLL_PRL RTC_PRLL_PRL_Msk /*!< RTC Prescaler Reload Value Low */
-
-/******************* Bit definition for RTC_DIVH register *******************/
-#define RTC_DIVH_RTC_DIV_Pos (0U)
-#define RTC_DIVH_RTC_DIV_Msk (0xFU << RTC_DIVH_RTC_DIV_Pos) /*!< 0x0000000F */
-#define RTC_DIVH_RTC_DIV RTC_DIVH_RTC_DIV_Msk /*!< RTC Clock Divider High */
-
-/******************* Bit definition for RTC_DIVL register *******************/
-#define RTC_DIVL_RTC_DIV_Pos (0U)
-#define RTC_DIVL_RTC_DIV_Msk (0xFFFFU << RTC_DIVL_RTC_DIV_Pos) /*!< 0x0000FFFF */
-#define RTC_DIVL_RTC_DIV RTC_DIVL_RTC_DIV_Msk /*!< RTC Clock Divider Low */
-
-/******************* Bit definition for RTC_CNTH register *******************/
-#define RTC_CNTH_RTC_CNT_Pos (0U)
-#define RTC_CNTH_RTC_CNT_Msk (0xFFFFU << RTC_CNTH_RTC_CNT_Pos) /*!< 0x0000FFFF */
-#define RTC_CNTH_RTC_CNT RTC_CNTH_RTC_CNT_Msk /*!< RTC Counter High */
-
-/******************* Bit definition for RTC_CNTL register *******************/
-#define RTC_CNTL_RTC_CNT_Pos (0U)
-#define RTC_CNTL_RTC_CNT_Msk (0xFFFFU << RTC_CNTL_RTC_CNT_Pos) /*!< 0x0000FFFF */
-#define RTC_CNTL_RTC_CNT RTC_CNTL_RTC_CNT_Msk /*!< RTC Counter Low */
-
-/******************* Bit definition for RTC_ALRH register *******************/
-#define RTC_ALRH_RTC_ALR_Pos (0U)
-#define RTC_ALRH_RTC_ALR_Msk (0xFFFFU << RTC_ALRH_RTC_ALR_Pos) /*!< 0x0000FFFF */
-#define RTC_ALRH_RTC_ALR RTC_ALRH_RTC_ALR_Msk /*!< RTC Alarm High */
-
-/******************* Bit definition for RTC_ALRL register *******************/
-#define RTC_ALRL_RTC_ALR_Pos (0U)
-#define RTC_ALRL_RTC_ALR_Msk (0xFFFFU << RTC_ALRL_RTC_ALR_Pos) /*!< 0x0000FFFF */
-#define RTC_ALRL_RTC_ALR RTC_ALRL_RTC_ALR_Msk /*!< RTC Alarm Low */
-
-/******************************************************************************/
-/* */
-/* Independent WATCHDOG (IWDG) */
-/* */
-/******************************************************************************/
-
-/******************* Bit definition for IWDG_KR register ********************/
-#define IWDG_KR_KEY_Pos (0U)
-#define IWDG_KR_KEY_Msk (0xFFFFU << IWDG_KR_KEY_Pos) /*!< 0x0000FFFF */
-#define IWDG_KR_KEY IWDG_KR_KEY_Msk /*!< Key value (write only, read 0000h) */
-
-/******************* Bit definition for IWDG_PR register ********************/
-#define IWDG_PR_PR_Pos (0U)
-#define IWDG_PR_PR_Msk (0x7U << IWDG_PR_PR_Pos) /*!< 0x00000007 */
-#define IWDG_PR_PR IWDG_PR_PR_Msk /*!< PR[2:0] (Prescaler divider) */
-#define IWDG_PR_PR_0 (0x1U << IWDG_PR_PR_Pos) /*!< 0x00000001 */
-#define IWDG_PR_PR_1 (0x2U << IWDG_PR_PR_Pos) /*!< 0x00000002 */
-#define IWDG_PR_PR_2 (0x4U << IWDG_PR_PR_Pos) /*!< 0x00000004 */
-
-/******************* Bit definition for IWDG_RLR register *******************/
-#define IWDG_RLR_RL_Pos (0U)
-#define IWDG_RLR_RL_Msk (0xFFFU << IWDG_RLR_RL_Pos) /*!< 0x00000FFF */
-#define IWDG_RLR_RL IWDG_RLR_RL_Msk /*!< Watchdog counter reload value */
-
-/******************* Bit definition for IWDG_SR register ********************/
-#define IWDG_SR_PVU_Pos (0U)
-#define IWDG_SR_PVU_Msk (0x1U << IWDG_SR_PVU_Pos) /*!< 0x00000001 */
-#define IWDG_SR_PVU IWDG_SR_PVU_Msk /*!< Watchdog prescaler value update */
-#define IWDG_SR_RVU_Pos (1U)
-#define IWDG_SR_RVU_Msk (0x1U << IWDG_SR_RVU_Pos) /*!< 0x00000002 */
-#define IWDG_SR_RVU IWDG_SR_RVU_Msk /*!< Watchdog counter reload value update */
-
-/******************************************************************************/
-/* */
-/* Window WATCHDOG (WWDG) */
-/* */
-/******************************************************************************/
-
-/******************* Bit definition for WWDG_CR register ********************/
-#define WWDG_CR_T_Pos (0U)
-#define WWDG_CR_T_Msk (0x7FU << WWDG_CR_T_Pos) /*!< 0x0000007F */
-#define WWDG_CR_T WWDG_CR_T_Msk /*!< T[6:0] bits (7-Bit counter (MSB to LSB)) */
-#define WWDG_CR_T_0 (0x01U << WWDG_CR_T_Pos) /*!< 0x00000001 */
-#define WWDG_CR_T_1 (0x02U << WWDG_CR_T_Pos) /*!< 0x00000002 */
-#define WWDG_CR_T_2 (0x04U << WWDG_CR_T_Pos) /*!< 0x00000004 */
-#define WWDG_CR_T_3 (0x08U << WWDG_CR_T_Pos) /*!< 0x00000008 */
-#define WWDG_CR_T_4 (0x10U << WWDG_CR_T_Pos) /*!< 0x00000010 */
-#define WWDG_CR_T_5 (0x20U << WWDG_CR_T_Pos) /*!< 0x00000020 */
-#define WWDG_CR_T_6 (0x40U << WWDG_CR_T_Pos) /*!< 0x00000040 */
-
-/* Legacy defines */
-#define WWDG_CR_T0 WWDG_CR_T_0
-#define WWDG_CR_T1 WWDG_CR_T_1
-#define WWDG_CR_T2 WWDG_CR_T_2
-#define WWDG_CR_T3 WWDG_CR_T_3
-#define WWDG_CR_T4 WWDG_CR_T_4
-#define WWDG_CR_T5 WWDG_CR_T_5
-#define WWDG_CR_T6 WWDG_CR_T_6
-
-#define WWDG_CR_WDGA_Pos (7U)
-#define WWDG_CR_WDGA_Msk (0x1U << WWDG_CR_WDGA_Pos) /*!< 0x00000080 */
-#define WWDG_CR_WDGA WWDG_CR_WDGA_Msk /*!< Activation bit */
-
-/******************* Bit definition for WWDG_CFR register *******************/
-#define WWDG_CFR_W_Pos (0U)
-#define WWDG_CFR_W_Msk (0x7FU << WWDG_CFR_W_Pos) /*!< 0x0000007F */
-#define WWDG_CFR_W WWDG_CFR_W_Msk /*!< W[6:0] bits (7-bit window value) */
-#define WWDG_CFR_W_0 (0x01U << WWDG_CFR_W_Pos) /*!< 0x00000001 */
-#define WWDG_CFR_W_1 (0x02U << WWDG_CFR_W_Pos) /*!< 0x00000002 */
-#define WWDG_CFR_W_2 (0x04U << WWDG_CFR_W_Pos) /*!< 0x00000004 */
-#define WWDG_CFR_W_3 (0x08U << WWDG_CFR_W_Pos) /*!< 0x00000008 */
-#define WWDG_CFR_W_4 (0x10U << WWDG_CFR_W_Pos) /*!< 0x00000010 */
-#define WWDG_CFR_W_5 (0x20U << WWDG_CFR_W_Pos) /*!< 0x00000020 */
-#define WWDG_CFR_W_6 (0x40U << WWDG_CFR_W_Pos) /*!< 0x00000040 */
-
-/* Legacy defines */
-#define WWDG_CFR_W0 WWDG_CFR_W_0
-#define WWDG_CFR_W1 WWDG_CFR_W_1
-#define WWDG_CFR_W2 WWDG_CFR_W_2
-#define WWDG_CFR_W3 WWDG_CFR_W_3
-#define WWDG_CFR_W4 WWDG_CFR_W_4
-#define WWDG_CFR_W5 WWDG_CFR_W_5
-#define WWDG_CFR_W6 WWDG_CFR_W_6
-
-#define WWDG_CFR_WDGTB_Pos (7U)
-#define WWDG_CFR_WDGTB_Msk (0x3U << WWDG_CFR_WDGTB_Pos) /*!< 0x00000180 */
-#define WWDG_CFR_WDGTB WWDG_CFR_WDGTB_Msk /*!< WDGTB[1:0] bits (Timer Base) */
-#define WWDG_CFR_WDGTB_0 (0x1U << WWDG_CFR_WDGTB_Pos) /*!< 0x00000080 */
-#define WWDG_CFR_WDGTB_1 (0x2U << WWDG_CFR_WDGTB_Pos) /*!< 0x00000100 */
-
-/* Legacy defines */
-#define WWDG_CFR_WDGTB0 WWDG_CFR_WDGTB_0
-#define WWDG_CFR_WDGTB1 WWDG_CFR_WDGTB_1
-
-#define WWDG_CFR_EWI_Pos (9U)
-#define WWDG_CFR_EWI_Msk (0x1U << WWDG_CFR_EWI_Pos) /*!< 0x00000200 */
-#define WWDG_CFR_EWI WWDG_CFR_EWI_Msk /*!< Early Wakeup Interrupt */
-
-/******************* Bit definition for WWDG_SR register ********************/
-#define WWDG_SR_EWIF_Pos (0U)
-#define WWDG_SR_EWIF_Msk (0x1U << WWDG_SR_EWIF_Pos) /*!< 0x00000001 */
-#define WWDG_SR_EWIF WWDG_SR_EWIF_Msk /*!< Early Wakeup Interrupt Flag */
-
-
-/******************************************************************************/
-/* */
-/* SD host Interface */
-/* */
-/******************************************************************************/
-
-/****************** Bit definition for SDIO_POWER register ******************/
-#define SDIO_POWER_PWRCTRL_Pos (0U)
-#define SDIO_POWER_PWRCTRL_Msk (0x3U << SDIO_POWER_PWRCTRL_Pos) /*!< 0x00000003 */
-#define SDIO_POWER_PWRCTRL SDIO_POWER_PWRCTRL_Msk /*!< PWRCTRL[1:0] bits (Power supply control bits) */
-#define SDIO_POWER_PWRCTRL_0 (0x1U << SDIO_POWER_PWRCTRL_Pos) /*!< 0x01 */
-#define SDIO_POWER_PWRCTRL_1 (0x2U << SDIO_POWER_PWRCTRL_Pos) /*!< 0x02 */
-
-/****************** Bit definition for SDIO_CLKCR register ******************/
-#define SDIO_CLKCR_CLKDIV_Pos (0U)
-#define SDIO_CLKCR_CLKDIV_Msk (0xFFU << SDIO_CLKCR_CLKDIV_Pos) /*!< 0x000000FF */
-#define SDIO_CLKCR_CLKDIV SDIO_CLKCR_CLKDIV_Msk /*!< Clock divide factor */
-#define SDIO_CLKCR_CLKEN_Pos (8U)
-#define SDIO_CLKCR_CLKEN_Msk (0x1U << SDIO_CLKCR_CLKEN_Pos) /*!< 0x00000100 */
-#define SDIO_CLKCR_CLKEN SDIO_CLKCR_CLKEN_Msk /*!< Clock enable bit */
-#define SDIO_CLKCR_PWRSAV_Pos (9U)
-#define SDIO_CLKCR_PWRSAV_Msk (0x1U << SDIO_CLKCR_PWRSAV_Pos) /*!< 0x00000200 */
-#define SDIO_CLKCR_PWRSAV SDIO_CLKCR_PWRSAV_Msk /*!< Power saving configuration bit */
-#define SDIO_CLKCR_BYPASS_Pos (10U)
-#define SDIO_CLKCR_BYPASS_Msk (0x1U << SDIO_CLKCR_BYPASS_Pos) /*!< 0x00000400 */
-#define SDIO_CLKCR_BYPASS SDIO_CLKCR_BYPASS_Msk /*!< Clock divider bypass enable bit */
-
-#define SDIO_CLKCR_WIDBUS_Pos (11U)
-#define SDIO_CLKCR_WIDBUS_Msk (0x3U << SDIO_CLKCR_WIDBUS_Pos) /*!< 0x00001800 */
-#define SDIO_CLKCR_WIDBUS SDIO_CLKCR_WIDBUS_Msk /*!< WIDBUS[1:0] bits (Wide bus mode enable bit) */
-#define SDIO_CLKCR_WIDBUS_0 (0x1U << SDIO_CLKCR_WIDBUS_Pos) /*!< 0x0800 */
-#define SDIO_CLKCR_WIDBUS_1 (0x2U << SDIO_CLKCR_WIDBUS_Pos) /*!< 0x1000 */
-
-#define SDIO_CLKCR_NEGEDGE_Pos (13U)
-#define SDIO_CLKCR_NEGEDGE_Msk (0x1U << SDIO_CLKCR_NEGEDGE_Pos) /*!< 0x00002000 */
-#define SDIO_CLKCR_NEGEDGE SDIO_CLKCR_NEGEDGE_Msk /*!< SDIO_CK dephasing selection bit */
-#define SDIO_CLKCR_HWFC_EN_Pos (14U)
-#define SDIO_CLKCR_HWFC_EN_Msk (0x1U << SDIO_CLKCR_HWFC_EN_Pos) /*!< 0x00004000 */
-#define SDIO_CLKCR_HWFC_EN SDIO_CLKCR_HWFC_EN_Msk /*!< HW Flow Control enable */
-
-/******************* Bit definition for SDIO_ARG register *******************/
-#define SDIO_ARG_CMDARG_Pos (0U)
-#define SDIO_ARG_CMDARG_Msk (0xFFFFFFFFU << SDIO_ARG_CMDARG_Pos) /*!< 0xFFFFFFFF */
-#define SDIO_ARG_CMDARG SDIO_ARG_CMDARG_Msk /*!< Command argument */
-
-/******************* Bit definition for SDIO_CMD register *******************/
-#define SDIO_CMD_CMDINDEX_Pos (0U)
-#define SDIO_CMD_CMDINDEX_Msk (0x3FU << SDIO_CMD_CMDINDEX_Pos) /*!< 0x0000003F */
-#define SDIO_CMD_CMDINDEX SDIO_CMD_CMDINDEX_Msk /*!< Command Index */
-
-#define SDIO_CMD_WAITRESP_Pos (6U)
-#define SDIO_CMD_WAITRESP_Msk (0x3U << SDIO_CMD_WAITRESP_Pos) /*!< 0x000000C0 */
-#define SDIO_CMD_WAITRESP SDIO_CMD_WAITRESP_Msk /*!< WAITRESP[1:0] bits (Wait for response bits) */
-#define SDIO_CMD_WAITRESP_0 (0x1U << SDIO_CMD_WAITRESP_Pos) /*!< 0x0040 */
-#define SDIO_CMD_WAITRESP_1 (0x2U << SDIO_CMD_WAITRESP_Pos) /*!< 0x0080 */
-
-#define SDIO_CMD_WAITINT_Pos (8U)
-#define SDIO_CMD_WAITINT_Msk (0x1U << SDIO_CMD_WAITINT_Pos) /*!< 0x00000100 */
-#define SDIO_CMD_WAITINT SDIO_CMD_WAITINT_Msk /*!< CPSM Waits for Interrupt Request */
-#define SDIO_CMD_WAITPEND_Pos (9U)
-#define SDIO_CMD_WAITPEND_Msk (0x1U << SDIO_CMD_WAITPEND_Pos) /*!< 0x00000200 */
-#define SDIO_CMD_WAITPEND SDIO_CMD_WAITPEND_Msk /*!< CPSM Waits for ends of data transfer (CmdPend internal signal) */
-#define SDIO_CMD_CPSMEN_Pos (10U)
-#define SDIO_CMD_CPSMEN_Msk (0x1U << SDIO_CMD_CPSMEN_Pos) /*!< 0x00000400 */
-#define SDIO_CMD_CPSMEN SDIO_CMD_CPSMEN_Msk /*!< Command path state machine (CPSM) Enable bit */
-#define SDIO_CMD_SDIOSUSPEND_Pos (11U)
-#define SDIO_CMD_SDIOSUSPEND_Msk (0x1U << SDIO_CMD_SDIOSUSPEND_Pos) /*!< 0x00000800 */
-#define SDIO_CMD_SDIOSUSPEND SDIO_CMD_SDIOSUSPEND_Msk /*!< SD I/O suspend command */
-#define SDIO_CMD_ENCMDCOMPL_Pos (12U)
-#define SDIO_CMD_ENCMDCOMPL_Msk (0x1U << SDIO_CMD_ENCMDCOMPL_Pos) /*!< 0x00001000 */
-#define SDIO_CMD_ENCMDCOMPL SDIO_CMD_ENCMDCOMPL_Msk /*!< Enable CMD completion */
-#define SDIO_CMD_NIEN_Pos (13U)
-#define SDIO_CMD_NIEN_Msk (0x1U << SDIO_CMD_NIEN_Pos) /*!< 0x00002000 */
-#define SDIO_CMD_NIEN SDIO_CMD_NIEN_Msk /*!< Not Interrupt Enable */
-#define SDIO_CMD_CEATACMD_Pos (14U)
-#define SDIO_CMD_CEATACMD_Msk (0x1U << SDIO_CMD_CEATACMD_Pos) /*!< 0x00004000 */
-#define SDIO_CMD_CEATACMD SDIO_CMD_CEATACMD_Msk /*!< CE-ATA command */
-
-/***************** Bit definition for SDIO_RESPCMD register *****************/
-#define SDIO_RESPCMD_RESPCMD_Pos (0U)
-#define SDIO_RESPCMD_RESPCMD_Msk (0x3FU << SDIO_RESPCMD_RESPCMD_Pos) /*!< 0x0000003F */
-#define SDIO_RESPCMD_RESPCMD SDIO_RESPCMD_RESPCMD_Msk /*!< Response command index */
-
-/****************** Bit definition for SDIO_RESP0 register ******************/
-#define SDIO_RESP0_CARDSTATUS0_Pos (0U)
-#define SDIO_RESP0_CARDSTATUS0_Msk (0xFFFFFFFFU << SDIO_RESP0_CARDSTATUS0_Pos) /*!< 0xFFFFFFFF */
-#define SDIO_RESP0_CARDSTATUS0 SDIO_RESP0_CARDSTATUS0_Msk /*!< Card Status */
-
-/****************** Bit definition for SDIO_RESP1 register ******************/
-#define SDIO_RESP1_CARDSTATUS1_Pos (0U)
-#define SDIO_RESP1_CARDSTATUS1_Msk (0xFFFFFFFFU << SDIO_RESP1_CARDSTATUS1_Pos) /*!< 0xFFFFFFFF */
-#define SDIO_RESP1_CARDSTATUS1 SDIO_RESP1_CARDSTATUS1_Msk /*!< Card Status */
-
-/****************** Bit definition for SDIO_RESP2 register ******************/
-#define SDIO_RESP2_CARDSTATUS2_Pos (0U)
-#define SDIO_RESP2_CARDSTATUS2_Msk (0xFFFFFFFFU << SDIO_RESP2_CARDSTATUS2_Pos) /*!< 0xFFFFFFFF */
-#define SDIO_RESP2_CARDSTATUS2 SDIO_RESP2_CARDSTATUS2_Msk /*!< Card Status */
-
-/****************** Bit definition for SDIO_RESP3 register ******************/
-#define SDIO_RESP3_CARDSTATUS3_Pos (0U)
-#define SDIO_RESP3_CARDSTATUS3_Msk (0xFFFFFFFFU << SDIO_RESP3_CARDSTATUS3_Pos) /*!< 0xFFFFFFFF */
-#define SDIO_RESP3_CARDSTATUS3 SDIO_RESP3_CARDSTATUS3_Msk /*!< Card Status */
-
-/****************** Bit definition for SDIO_RESP4 register ******************/
-#define SDIO_RESP4_CARDSTATUS4_Pos (0U)
-#define SDIO_RESP4_CARDSTATUS4_Msk (0xFFFFFFFFU << SDIO_RESP4_CARDSTATUS4_Pos) /*!< 0xFFFFFFFF */
-#define SDIO_RESP4_CARDSTATUS4 SDIO_RESP4_CARDSTATUS4_Msk /*!< Card Status */
-
-/****************** Bit definition for SDIO_DTIMER register *****************/
-#define SDIO_DTIMER_DATATIME_Pos (0U)
-#define SDIO_DTIMER_DATATIME_Msk (0xFFFFFFFFU << SDIO_DTIMER_DATATIME_Pos) /*!< 0xFFFFFFFF */
-#define SDIO_DTIMER_DATATIME SDIO_DTIMER_DATATIME_Msk /*!< Data timeout period. */
-
-/****************** Bit definition for SDIO_DLEN register *******************/
-#define SDIO_DLEN_DATALENGTH_Pos (0U)
-#define SDIO_DLEN_DATALENGTH_Msk (0x1FFFFFFU << SDIO_DLEN_DATALENGTH_Pos) /*!< 0x01FFFFFF */
-#define SDIO_DLEN_DATALENGTH SDIO_DLEN_DATALENGTH_Msk /*!< Data length value */
-
-/****************** Bit definition for SDIO_DCTRL register ******************/
-#define SDIO_DCTRL_DTEN_Pos (0U)
-#define SDIO_DCTRL_DTEN_Msk (0x1U << SDIO_DCTRL_DTEN_Pos) /*!< 0x00000001 */
-#define SDIO_DCTRL_DTEN SDIO_DCTRL_DTEN_Msk /*!< Data transfer enabled bit */
-#define SDIO_DCTRL_DTDIR_Pos (1U)
-#define SDIO_DCTRL_DTDIR_Msk (0x1U << SDIO_DCTRL_DTDIR_Pos) /*!< 0x00000002 */
-#define SDIO_DCTRL_DTDIR SDIO_DCTRL_DTDIR_Msk /*!< Data transfer direction selection */
-#define SDIO_DCTRL_DTMODE_Pos (2U)
-#define SDIO_DCTRL_DTMODE_Msk (0x1U << SDIO_DCTRL_DTMODE_Pos) /*!< 0x00000004 */
-#define SDIO_DCTRL_DTMODE SDIO_DCTRL_DTMODE_Msk /*!< Data transfer mode selection */
-#define SDIO_DCTRL_DMAEN_Pos (3U)
-#define SDIO_DCTRL_DMAEN_Msk (0x1U << SDIO_DCTRL_DMAEN_Pos) /*!< 0x00000008 */
-#define SDIO_DCTRL_DMAEN SDIO_DCTRL_DMAEN_Msk /*!< DMA enabled bit */
-
-#define SDIO_DCTRL_DBLOCKSIZE_Pos (4U)
-#define SDIO_DCTRL_DBLOCKSIZE_Msk (0xFU << SDIO_DCTRL_DBLOCKSIZE_Pos) /*!< 0x000000F0 */
-#define SDIO_DCTRL_DBLOCKSIZE SDIO_DCTRL_DBLOCKSIZE_Msk /*!< DBLOCKSIZE[3:0] bits (Data block size) */
-#define SDIO_DCTRL_DBLOCKSIZE_0 (0x1U << SDIO_DCTRL_DBLOCKSIZE_Pos) /*!< 0x0010 */
-#define SDIO_DCTRL_DBLOCKSIZE_1 (0x2U << SDIO_DCTRL_DBLOCKSIZE_Pos) /*!< 0x0020 */
-#define SDIO_DCTRL_DBLOCKSIZE_2 (0x4U << SDIO_DCTRL_DBLOCKSIZE_Pos) /*!< 0x0040 */
-#define SDIO_DCTRL_DBLOCKSIZE_3 (0x8U << SDIO_DCTRL_DBLOCKSIZE_Pos) /*!< 0x0080 */
-
-#define SDIO_DCTRL_RWSTART_Pos (8U)
-#define SDIO_DCTRL_RWSTART_Msk (0x1U << SDIO_DCTRL_RWSTART_Pos) /*!< 0x00000100 */
-#define SDIO_DCTRL_RWSTART SDIO_DCTRL_RWSTART_Msk /*!< Read wait start */
-#define SDIO_DCTRL_RWSTOP_Pos (9U)
-#define SDIO_DCTRL_RWSTOP_Msk (0x1U << SDIO_DCTRL_RWSTOP_Pos) /*!< 0x00000200 */
-#define SDIO_DCTRL_RWSTOP SDIO_DCTRL_RWSTOP_Msk /*!< Read wait stop */
-#define SDIO_DCTRL_RWMOD_Pos (10U)
-#define SDIO_DCTRL_RWMOD_Msk (0x1U << SDIO_DCTRL_RWMOD_Pos) /*!< 0x00000400 */
-#define SDIO_DCTRL_RWMOD SDIO_DCTRL_RWMOD_Msk /*!< Read wait mode */
-#define SDIO_DCTRL_SDIOEN_Pos (11U)
-#define SDIO_DCTRL_SDIOEN_Msk (0x1U << SDIO_DCTRL_SDIOEN_Pos) /*!< 0x00000800 */
-#define SDIO_DCTRL_SDIOEN SDIO_DCTRL_SDIOEN_Msk /*!< SD I/O enable functions */
-
-/****************** Bit definition for SDIO_DCOUNT register *****************/
-#define SDIO_DCOUNT_DATACOUNT_Pos (0U)
-#define SDIO_DCOUNT_DATACOUNT_Msk (0x1FFFFFFU << SDIO_DCOUNT_DATACOUNT_Pos) /*!< 0x01FFFFFF */
-#define SDIO_DCOUNT_DATACOUNT SDIO_DCOUNT_DATACOUNT_Msk /*!< Data count value */
-
-/****************** Bit definition for SDIO_STA register ********************/
-#define SDIO_STA_CCRCFAIL_Pos (0U)
-#define SDIO_STA_CCRCFAIL_Msk (0x1U << SDIO_STA_CCRCFAIL_Pos) /*!< 0x00000001 */
-#define SDIO_STA_CCRCFAIL SDIO_STA_CCRCFAIL_Msk /*!< Command response received (CRC check failed) */
-#define SDIO_STA_DCRCFAIL_Pos (1U)
-#define SDIO_STA_DCRCFAIL_Msk (0x1U << SDIO_STA_DCRCFAIL_Pos) /*!< 0x00000002 */
-#define SDIO_STA_DCRCFAIL SDIO_STA_DCRCFAIL_Msk /*!< Data block sent/received (CRC check failed) */
-#define SDIO_STA_CTIMEOUT_Pos (2U)
-#define SDIO_STA_CTIMEOUT_Msk (0x1U << SDIO_STA_CTIMEOUT_Pos) /*!< 0x00000004 */
-#define SDIO_STA_CTIMEOUT SDIO_STA_CTIMEOUT_Msk /*!< Command response timeout */
-#define SDIO_STA_DTIMEOUT_Pos (3U)
-#define SDIO_STA_DTIMEOUT_Msk (0x1U << SDIO_STA_DTIMEOUT_Pos) /*!< 0x00000008 */
-#define SDIO_STA_DTIMEOUT SDIO_STA_DTIMEOUT_Msk /*!< Data timeout */
-#define SDIO_STA_TXUNDERR_Pos (4U)
-#define SDIO_STA_TXUNDERR_Msk (0x1U << SDIO_STA_TXUNDERR_Pos) /*!< 0x00000010 */
-#define SDIO_STA_TXUNDERR SDIO_STA_TXUNDERR_Msk /*!< Transmit FIFO underrun error */
-#define SDIO_STA_RXOVERR_Pos (5U)
-#define SDIO_STA_RXOVERR_Msk (0x1U << SDIO_STA_RXOVERR_Pos) /*!< 0x00000020 */
-#define SDIO_STA_RXOVERR SDIO_STA_RXOVERR_Msk /*!< Received FIFO overrun error */
-#define SDIO_STA_CMDREND_Pos (6U)
-#define SDIO_STA_CMDREND_Msk (0x1U << SDIO_STA_CMDREND_Pos) /*!< 0x00000040 */
-#define SDIO_STA_CMDREND SDIO_STA_CMDREND_Msk /*!< Command response received (CRC check passed) */
-#define SDIO_STA_CMDSENT_Pos (7U)
-#define SDIO_STA_CMDSENT_Msk (0x1U << SDIO_STA_CMDSENT_Pos) /*!< 0x00000080 */
-#define SDIO_STA_CMDSENT SDIO_STA_CMDSENT_Msk /*!< Command sent (no response required) */
-#define SDIO_STA_DATAEND_Pos (8U)
-#define SDIO_STA_DATAEND_Msk (0x1U << SDIO_STA_DATAEND_Pos) /*!< 0x00000100 */
-#define SDIO_STA_DATAEND SDIO_STA_DATAEND_Msk /*!< Data end (data counter, SDIDCOUNT, is zero) */
-#define SDIO_STA_STBITERR_Pos (9U)
-#define SDIO_STA_STBITERR_Msk (0x1U << SDIO_STA_STBITERR_Pos) /*!< 0x00000200 */
-#define SDIO_STA_STBITERR SDIO_STA_STBITERR_Msk /*!< Start bit not detected on all data signals in wide bus mode */
-#define SDIO_STA_DBCKEND_Pos (10U)
-#define SDIO_STA_DBCKEND_Msk (0x1U << SDIO_STA_DBCKEND_Pos) /*!< 0x00000400 */
-#define SDIO_STA_DBCKEND SDIO_STA_DBCKEND_Msk /*!< Data block sent/received (CRC check passed) */
-#define SDIO_STA_CMDACT_Pos (11U)
-#define SDIO_STA_CMDACT_Msk (0x1U << SDIO_STA_CMDACT_Pos) /*!< 0x00000800 */
-#define SDIO_STA_CMDACT SDIO_STA_CMDACT_Msk /*!< Command transfer in progress */
-#define SDIO_STA_TXACT_Pos (12U)
-#define SDIO_STA_TXACT_Msk (0x1U << SDIO_STA_TXACT_Pos) /*!< 0x00001000 */
-#define SDIO_STA_TXACT SDIO_STA_TXACT_Msk /*!< Data transmit in progress */
-#define SDIO_STA_RXACT_Pos (13U)
-#define SDIO_STA_RXACT_Msk (0x1U << SDIO_STA_RXACT_Pos) /*!< 0x00002000 */
-#define SDIO_STA_RXACT SDIO_STA_RXACT_Msk /*!< Data receive in progress */
-#define SDIO_STA_TXFIFOHE_Pos (14U)
-#define SDIO_STA_TXFIFOHE_Msk (0x1U << SDIO_STA_TXFIFOHE_Pos) /*!< 0x00004000 */
-#define SDIO_STA_TXFIFOHE SDIO_STA_TXFIFOHE_Msk /*!< Transmit FIFO Half Empty: at least 8 words can be written into the FIFO */
-#define SDIO_STA_RXFIFOHF_Pos (15U)
-#define SDIO_STA_RXFIFOHF_Msk (0x1U << SDIO_STA_RXFIFOHF_Pos) /*!< 0x00008000 */
-#define SDIO_STA_RXFIFOHF SDIO_STA_RXFIFOHF_Msk /*!< Receive FIFO Half Full: there are at least 8 words in the FIFO */
-#define SDIO_STA_TXFIFOF_Pos (16U)
-#define SDIO_STA_TXFIFOF_Msk (0x1U << SDIO_STA_TXFIFOF_Pos) /*!< 0x00010000 */
-#define SDIO_STA_TXFIFOF SDIO_STA_TXFIFOF_Msk /*!< Transmit FIFO full */
-#define SDIO_STA_RXFIFOF_Pos (17U)
-#define SDIO_STA_RXFIFOF_Msk (0x1U << SDIO_STA_RXFIFOF_Pos) /*!< 0x00020000 */
-#define SDIO_STA_RXFIFOF SDIO_STA_RXFIFOF_Msk /*!< Receive FIFO full */
-#define SDIO_STA_TXFIFOE_Pos (18U)
-#define SDIO_STA_TXFIFOE_Msk (0x1U << SDIO_STA_TXFIFOE_Pos) /*!< 0x00040000 */
-#define SDIO_STA_TXFIFOE SDIO_STA_TXFIFOE_Msk /*!< Transmit FIFO empty */
-#define SDIO_STA_RXFIFOE_Pos (19U)
-#define SDIO_STA_RXFIFOE_Msk (0x1U << SDIO_STA_RXFIFOE_Pos) /*!< 0x00080000 */
-#define SDIO_STA_RXFIFOE SDIO_STA_RXFIFOE_Msk /*!< Receive FIFO empty */
-#define SDIO_STA_TXDAVL_Pos (20U)
-#define SDIO_STA_TXDAVL_Msk (0x1U << SDIO_STA_TXDAVL_Pos) /*!< 0x00100000 */
-#define SDIO_STA_TXDAVL SDIO_STA_TXDAVL_Msk /*!< Data available in transmit FIFO */
-#define SDIO_STA_RXDAVL_Pos (21U)
-#define SDIO_STA_RXDAVL_Msk (0x1U << SDIO_STA_RXDAVL_Pos) /*!< 0x00200000 */
-#define SDIO_STA_RXDAVL SDIO_STA_RXDAVL_Msk /*!< Data available in receive FIFO */
-#define SDIO_STA_SDIOIT_Pos (22U)
-#define SDIO_STA_SDIOIT_Msk (0x1U << SDIO_STA_SDIOIT_Pos) /*!< 0x00400000 */
-#define SDIO_STA_SDIOIT SDIO_STA_SDIOIT_Msk /*!< SDIO interrupt received */
-#define SDIO_STA_CEATAEND_Pos (23U)
-#define SDIO_STA_CEATAEND_Msk (0x1U << SDIO_STA_CEATAEND_Pos) /*!< 0x00800000 */
-#define SDIO_STA_CEATAEND SDIO_STA_CEATAEND_Msk /*!< CE-ATA command completion signal received for CMD61 */
-
-/******************* Bit definition for SDIO_ICR register *******************/
-#define SDIO_ICR_CCRCFAILC_Pos (0U)
-#define SDIO_ICR_CCRCFAILC_Msk (0x1U << SDIO_ICR_CCRCFAILC_Pos) /*!< 0x00000001 */
-#define SDIO_ICR_CCRCFAILC SDIO_ICR_CCRCFAILC_Msk /*!< CCRCFAIL flag clear bit */
-#define SDIO_ICR_DCRCFAILC_Pos (1U)
-#define SDIO_ICR_DCRCFAILC_Msk (0x1U << SDIO_ICR_DCRCFAILC_Pos) /*!< 0x00000002 */
-#define SDIO_ICR_DCRCFAILC SDIO_ICR_DCRCFAILC_Msk /*!< DCRCFAIL flag clear bit */
-#define SDIO_ICR_CTIMEOUTC_Pos (2U)
-#define SDIO_ICR_CTIMEOUTC_Msk (0x1U << SDIO_ICR_CTIMEOUTC_Pos) /*!< 0x00000004 */
-#define SDIO_ICR_CTIMEOUTC SDIO_ICR_CTIMEOUTC_Msk /*!< CTIMEOUT flag clear bit */
-#define SDIO_ICR_DTIMEOUTC_Pos (3U)
-#define SDIO_ICR_DTIMEOUTC_Msk (0x1U << SDIO_ICR_DTIMEOUTC_Pos) /*!< 0x00000008 */
-#define SDIO_ICR_DTIMEOUTC SDIO_ICR_DTIMEOUTC_Msk /*!< DTIMEOUT flag clear bit */
-#define SDIO_ICR_TXUNDERRC_Pos (4U)
-#define SDIO_ICR_TXUNDERRC_Msk (0x1U << SDIO_ICR_TXUNDERRC_Pos) /*!< 0x00000010 */
-#define SDIO_ICR_TXUNDERRC SDIO_ICR_TXUNDERRC_Msk /*!< TXUNDERR flag clear bit */
-#define SDIO_ICR_RXOVERRC_Pos (5U)
-#define SDIO_ICR_RXOVERRC_Msk (0x1U << SDIO_ICR_RXOVERRC_Pos) /*!< 0x00000020 */
-#define SDIO_ICR_RXOVERRC SDIO_ICR_RXOVERRC_Msk /*!< RXOVERR flag clear bit */
-#define SDIO_ICR_CMDRENDC_Pos (6U)
-#define SDIO_ICR_CMDRENDC_Msk (0x1U << SDIO_ICR_CMDRENDC_Pos) /*!< 0x00000040 */
-#define SDIO_ICR_CMDRENDC SDIO_ICR_CMDRENDC_Msk /*!< CMDREND flag clear bit */
-#define SDIO_ICR_CMDSENTC_Pos (7U)
-#define SDIO_ICR_CMDSENTC_Msk (0x1U << SDIO_ICR_CMDSENTC_Pos) /*!< 0x00000080 */
-#define SDIO_ICR_CMDSENTC SDIO_ICR_CMDSENTC_Msk /*!< CMDSENT flag clear bit */
-#define SDIO_ICR_DATAENDC_Pos (8U)
-#define SDIO_ICR_DATAENDC_Msk (0x1U << SDIO_ICR_DATAENDC_Pos) /*!< 0x00000100 */
-#define SDIO_ICR_DATAENDC SDIO_ICR_DATAENDC_Msk /*!< DATAEND flag clear bit */
-#define SDIO_ICR_STBITERRC_Pos (9U)
-#define SDIO_ICR_STBITERRC_Msk (0x1U << SDIO_ICR_STBITERRC_Pos) /*!< 0x00000200 */
-#define SDIO_ICR_STBITERRC SDIO_ICR_STBITERRC_Msk /*!< STBITERR flag clear bit */
-#define SDIO_ICR_DBCKENDC_Pos (10U)
-#define SDIO_ICR_DBCKENDC_Msk (0x1U << SDIO_ICR_DBCKENDC_Pos) /*!< 0x00000400 */
-#define SDIO_ICR_DBCKENDC SDIO_ICR_DBCKENDC_Msk /*!< DBCKEND flag clear bit */
-#define SDIO_ICR_SDIOITC_Pos (22U)
-#define SDIO_ICR_SDIOITC_Msk (0x1U << SDIO_ICR_SDIOITC_Pos) /*!< 0x00400000 */
-#define SDIO_ICR_SDIOITC SDIO_ICR_SDIOITC_Msk /*!< SDIOIT flag clear bit */
-#define SDIO_ICR_CEATAENDC_Pos (23U)
-#define SDIO_ICR_CEATAENDC_Msk (0x1U << SDIO_ICR_CEATAENDC_Pos) /*!< 0x00800000 */
-#define SDIO_ICR_CEATAENDC SDIO_ICR_CEATAENDC_Msk /*!< CEATAEND flag clear bit */
-
-/****************** Bit definition for SDIO_MASK register *******************/
-#define SDIO_MASK_CCRCFAILIE_Pos (0U)
-#define SDIO_MASK_CCRCFAILIE_Msk (0x1U << SDIO_MASK_CCRCFAILIE_Pos) /*!< 0x00000001 */
-#define SDIO_MASK_CCRCFAILIE SDIO_MASK_CCRCFAILIE_Msk /*!< Command CRC Fail Interrupt Enable */
-#define SDIO_MASK_DCRCFAILIE_Pos (1U)
-#define SDIO_MASK_DCRCFAILIE_Msk (0x1U << SDIO_MASK_DCRCFAILIE_Pos) /*!< 0x00000002 */
-#define SDIO_MASK_DCRCFAILIE SDIO_MASK_DCRCFAILIE_Msk /*!< Data CRC Fail Interrupt Enable */
-#define SDIO_MASK_CTIMEOUTIE_Pos (2U)
-#define SDIO_MASK_CTIMEOUTIE_Msk (0x1U << SDIO_MASK_CTIMEOUTIE_Pos) /*!< 0x00000004 */
-#define SDIO_MASK_CTIMEOUTIE SDIO_MASK_CTIMEOUTIE_Msk /*!< Command TimeOut Interrupt Enable */
-#define SDIO_MASK_DTIMEOUTIE_Pos (3U)
-#define SDIO_MASK_DTIMEOUTIE_Msk (0x1U << SDIO_MASK_DTIMEOUTIE_Pos) /*!< 0x00000008 */
-#define SDIO_MASK_DTIMEOUTIE SDIO_MASK_DTIMEOUTIE_Msk /*!< Data TimeOut Interrupt Enable */
-#define SDIO_MASK_TXUNDERRIE_Pos (4U)
-#define SDIO_MASK_TXUNDERRIE_Msk (0x1U << SDIO_MASK_TXUNDERRIE_Pos) /*!< 0x00000010 */
-#define SDIO_MASK_TXUNDERRIE SDIO_MASK_TXUNDERRIE_Msk /*!< Tx FIFO UnderRun Error Interrupt Enable */
-#define SDIO_MASK_RXOVERRIE_Pos (5U)
-#define SDIO_MASK_RXOVERRIE_Msk (0x1U << SDIO_MASK_RXOVERRIE_Pos) /*!< 0x00000020 */
-#define SDIO_MASK_RXOVERRIE SDIO_MASK_RXOVERRIE_Msk /*!< Rx FIFO OverRun Error Interrupt Enable */
-#define SDIO_MASK_CMDRENDIE_Pos (6U)
-#define SDIO_MASK_CMDRENDIE_Msk (0x1U << SDIO_MASK_CMDRENDIE_Pos) /*!< 0x00000040 */
-#define SDIO_MASK_CMDRENDIE SDIO_MASK_CMDRENDIE_Msk /*!< Command Response Received Interrupt Enable */
-#define SDIO_MASK_CMDSENTIE_Pos (7U)
-#define SDIO_MASK_CMDSENTIE_Msk (0x1U << SDIO_MASK_CMDSENTIE_Pos) /*!< 0x00000080 */
-#define SDIO_MASK_CMDSENTIE SDIO_MASK_CMDSENTIE_Msk /*!< Command Sent Interrupt Enable */
-#define SDIO_MASK_DATAENDIE_Pos (8U)
-#define SDIO_MASK_DATAENDIE_Msk (0x1U << SDIO_MASK_DATAENDIE_Pos) /*!< 0x00000100 */
-#define SDIO_MASK_DATAENDIE SDIO_MASK_DATAENDIE_Msk /*!< Data End Interrupt Enable */
-#define SDIO_MASK_STBITERRIE_Pos (9U)
-#define SDIO_MASK_STBITERRIE_Msk (0x1U << SDIO_MASK_STBITERRIE_Pos) /*!< 0x00000200 */
-#define SDIO_MASK_STBITERRIE SDIO_MASK_STBITERRIE_Msk /*!< Start Bit Error Interrupt Enable */
-#define SDIO_MASK_DBCKENDIE_Pos (10U)
-#define SDIO_MASK_DBCKENDIE_Msk (0x1U << SDIO_MASK_DBCKENDIE_Pos) /*!< 0x00000400 */
-#define SDIO_MASK_DBCKENDIE SDIO_MASK_DBCKENDIE_Msk /*!< Data Block End Interrupt Enable */
-#define SDIO_MASK_CMDACTIE_Pos (11U)
-#define SDIO_MASK_CMDACTIE_Msk (0x1U << SDIO_MASK_CMDACTIE_Pos) /*!< 0x00000800 */
-#define SDIO_MASK_CMDACTIE SDIO_MASK_CMDACTIE_Msk /*!< Command Acting Interrupt Enable */
-#define SDIO_MASK_TXACTIE_Pos (12U)
-#define SDIO_MASK_TXACTIE_Msk (0x1U << SDIO_MASK_TXACTIE_Pos) /*!< 0x00001000 */
-#define SDIO_MASK_TXACTIE SDIO_MASK_TXACTIE_Msk /*!< Data Transmit Acting Interrupt Enable */
-#define SDIO_MASK_RXACTIE_Pos (13U)
-#define SDIO_MASK_RXACTIE_Msk (0x1U << SDIO_MASK_RXACTIE_Pos) /*!< 0x00002000 */
-#define SDIO_MASK_RXACTIE SDIO_MASK_RXACTIE_Msk /*!< Data receive acting interrupt enabled */
-#define SDIO_MASK_TXFIFOHEIE_Pos (14U)
-#define SDIO_MASK_TXFIFOHEIE_Msk (0x1U << SDIO_MASK_TXFIFOHEIE_Pos) /*!< 0x00004000 */
-#define SDIO_MASK_TXFIFOHEIE SDIO_MASK_TXFIFOHEIE_Msk /*!< Tx FIFO Half Empty interrupt Enable */
-#define SDIO_MASK_RXFIFOHFIE_Pos (15U)
-#define SDIO_MASK_RXFIFOHFIE_Msk (0x1U << SDIO_MASK_RXFIFOHFIE_Pos) /*!< 0x00008000 */
-#define SDIO_MASK_RXFIFOHFIE SDIO_MASK_RXFIFOHFIE_Msk /*!< Rx FIFO Half Full interrupt Enable */
-#define SDIO_MASK_TXFIFOFIE_Pos (16U)
-#define SDIO_MASK_TXFIFOFIE_Msk (0x1U << SDIO_MASK_TXFIFOFIE_Pos) /*!< 0x00010000 */
-#define SDIO_MASK_TXFIFOFIE SDIO_MASK_TXFIFOFIE_Msk /*!< Tx FIFO Full interrupt Enable */
-#define SDIO_MASK_RXFIFOFIE_Pos (17U)
-#define SDIO_MASK_RXFIFOFIE_Msk (0x1U << SDIO_MASK_RXFIFOFIE_Pos) /*!< 0x00020000 */
-#define SDIO_MASK_RXFIFOFIE SDIO_MASK_RXFIFOFIE_Msk /*!< Rx FIFO Full interrupt Enable */
-#define SDIO_MASK_TXFIFOEIE_Pos (18U)
-#define SDIO_MASK_TXFIFOEIE_Msk (0x1U << SDIO_MASK_TXFIFOEIE_Pos) /*!< 0x00040000 */
-#define SDIO_MASK_TXFIFOEIE SDIO_MASK_TXFIFOEIE_Msk /*!< Tx FIFO Empty interrupt Enable */
-#define SDIO_MASK_RXFIFOEIE_Pos (19U)
-#define SDIO_MASK_RXFIFOEIE_Msk (0x1U << SDIO_MASK_RXFIFOEIE_Pos) /*!< 0x00080000 */
-#define SDIO_MASK_RXFIFOEIE SDIO_MASK_RXFIFOEIE_Msk /*!< Rx FIFO Empty interrupt Enable */
-#define SDIO_MASK_TXDAVLIE_Pos (20U)
-#define SDIO_MASK_TXDAVLIE_Msk (0x1U << SDIO_MASK_TXDAVLIE_Pos) /*!< 0x00100000 */
-#define SDIO_MASK_TXDAVLIE SDIO_MASK_TXDAVLIE_Msk /*!< Data available in Tx FIFO interrupt Enable */
-#define SDIO_MASK_RXDAVLIE_Pos (21U)
-#define SDIO_MASK_RXDAVLIE_Msk (0x1U << SDIO_MASK_RXDAVLIE_Pos) /*!< 0x00200000 */
-#define SDIO_MASK_RXDAVLIE SDIO_MASK_RXDAVLIE_Msk /*!< Data available in Rx FIFO interrupt Enable */
-#define SDIO_MASK_SDIOITIE_Pos (22U)
-#define SDIO_MASK_SDIOITIE_Msk (0x1U << SDIO_MASK_SDIOITIE_Pos) /*!< 0x00400000 */
-#define SDIO_MASK_SDIOITIE SDIO_MASK_SDIOITIE_Msk /*!< SDIO Mode Interrupt Received interrupt Enable */
-#define SDIO_MASK_CEATAENDIE_Pos (23U)
-#define SDIO_MASK_CEATAENDIE_Msk (0x1U << SDIO_MASK_CEATAENDIE_Pos) /*!< 0x00800000 */
-#define SDIO_MASK_CEATAENDIE SDIO_MASK_CEATAENDIE_Msk /*!< CE-ATA command completion signal received Interrupt Enable */
-
-/***************** Bit definition for SDIO_FIFOCNT register *****************/
-#define SDIO_FIFOCNT_FIFOCOUNT_Pos (0U)
-#define SDIO_FIFOCNT_FIFOCOUNT_Msk (0xFFFFFFU << SDIO_FIFOCNT_FIFOCOUNT_Pos) /*!< 0x00FFFFFF */
-#define SDIO_FIFOCNT_FIFOCOUNT SDIO_FIFOCNT_FIFOCOUNT_Msk /*!< Remaining number of words to be written to or read from the FIFO */
-
-/****************** Bit definition for SDIO_FIFO register *******************/
-#define SDIO_FIFO_FIFODATA_Pos (0U)
-#define SDIO_FIFO_FIFODATA_Msk (0xFFFFFFFFU << SDIO_FIFO_FIFODATA_Pos) /*!< 0xFFFFFFFF */
-#define SDIO_FIFO_FIFODATA SDIO_FIFO_FIFODATA_Msk /*!< Receive and transmit FIFO data */
-
-/******************************************************************************/
-/* */
-/* USB Device FS */
-/* */
-/******************************************************************************/
-
-/*!< Endpoint-specific registers */
-#define USB_EP0R USB_BASE /*!< Endpoint 0 register address */
-#define USB_EP1R (USB_BASE + 0x00000004) /*!< Endpoint 1 register address */
-#define USB_EP2R (USB_BASE + 0x00000008) /*!< Endpoint 2 register address */
-#define USB_EP3R (USB_BASE + 0x0000000C) /*!< Endpoint 3 register address */
-#define USB_EP4R (USB_BASE + 0x00000010) /*!< Endpoint 4 register address */
-#define USB_EP5R (USB_BASE + 0x00000014) /*!< Endpoint 5 register address */
-#define USB_EP6R (USB_BASE + 0x00000018) /*!< Endpoint 6 register address */
-#define USB_EP7R (USB_BASE + 0x0000001C) /*!< Endpoint 7 register address */
-
-/* bit positions */
-#define USB_EP_CTR_RX_Pos (15U)
-#define USB_EP_CTR_RX_Msk (0x1U << USB_EP_CTR_RX_Pos) /*!< 0x00008000 */
-#define USB_EP_CTR_RX USB_EP_CTR_RX_Msk /*!< EndPoint Correct TRansfer RX */
-#define USB_EP_DTOG_RX_Pos (14U)
-#define USB_EP_DTOG_RX_Msk (0x1U << USB_EP_DTOG_RX_Pos) /*!< 0x00004000 */
-#define USB_EP_DTOG_RX USB_EP_DTOG_RX_Msk /*!< EndPoint Data TOGGLE RX */
-#define USB_EPRX_STAT_Pos (12U)
-#define USB_EPRX_STAT_Msk (0x3U << USB_EPRX_STAT_Pos) /*!< 0x00003000 */
-#define USB_EPRX_STAT USB_EPRX_STAT_Msk /*!< EndPoint RX STATus bit field */
-#define USB_EP_SETUP_Pos (11U)
-#define USB_EP_SETUP_Msk (0x1U << USB_EP_SETUP_Pos) /*!< 0x00000800 */
-#define USB_EP_SETUP USB_EP_SETUP_Msk /*!< EndPoint SETUP */
-#define USB_EP_T_FIELD_Pos (9U)
-#define USB_EP_T_FIELD_Msk (0x3U << USB_EP_T_FIELD_Pos) /*!< 0x00000600 */
-#define USB_EP_T_FIELD USB_EP_T_FIELD_Msk /*!< EndPoint TYPE */
-#define USB_EP_KIND_Pos (8U)
-#define USB_EP_KIND_Msk (0x1U << USB_EP_KIND_Pos) /*!< 0x00000100 */
-#define USB_EP_KIND USB_EP_KIND_Msk /*!< EndPoint KIND */
-#define USB_EP_CTR_TX_Pos (7U)
-#define USB_EP_CTR_TX_Msk (0x1U << USB_EP_CTR_TX_Pos) /*!< 0x00000080 */
-#define USB_EP_CTR_TX USB_EP_CTR_TX_Msk /*!< EndPoint Correct TRansfer TX */
-#define USB_EP_DTOG_TX_Pos (6U)
-#define USB_EP_DTOG_TX_Msk (0x1U << USB_EP_DTOG_TX_Pos) /*!< 0x00000040 */
-#define USB_EP_DTOG_TX USB_EP_DTOG_TX_Msk /*!< EndPoint Data TOGGLE TX */
-#define USB_EPTX_STAT_Pos (4U)
-#define USB_EPTX_STAT_Msk (0x3U << USB_EPTX_STAT_Pos) /*!< 0x00000030 */
-#define USB_EPTX_STAT USB_EPTX_STAT_Msk /*!< EndPoint TX STATus bit field */
-#define USB_EPADDR_FIELD_Pos (0U)
-#define USB_EPADDR_FIELD_Msk (0xFU << USB_EPADDR_FIELD_Pos) /*!< 0x0000000F */
-#define USB_EPADDR_FIELD USB_EPADDR_FIELD_Msk /*!< EndPoint ADDRess FIELD */
-
-/* EndPoint REGister MASK (no toggle fields) */
-#define USB_EPREG_MASK (USB_EP_CTR_RX|USB_EP_SETUP|USB_EP_T_FIELD|USB_EP_KIND|USB_EP_CTR_TX|USB_EPADDR_FIELD)
- /*!< EP_TYPE[1:0] EndPoint TYPE */
-#define USB_EP_TYPE_MASK_Pos (9U)
-#define USB_EP_TYPE_MASK_Msk (0x3U << USB_EP_TYPE_MASK_Pos) /*!< 0x00000600 */
-#define USB_EP_TYPE_MASK USB_EP_TYPE_MASK_Msk /*!< EndPoint TYPE Mask */
-#define USB_EP_BULK ((uint32_t)0x00000000) /*!< EndPoint BULK */
-#define USB_EP_CONTROL ((uint32_t)0x00000200) /*!< EndPoint CONTROL */
-#define USB_EP_ISOCHRONOUS ((uint32_t)0x00000400) /*!< EndPoint ISOCHRONOUS */
-#define USB_EP_INTERRUPT ((uint32_t)0x00000600) /*!< EndPoint INTERRUPT */
-#define USB_EP_T_MASK (~USB_EP_T_FIELD & USB_EPREG_MASK)
-
-#define USB_EPKIND_MASK (~USB_EP_KIND & USB_EPREG_MASK) /*!< EP_KIND EndPoint KIND */
- /*!< STAT_TX[1:0] STATus for TX transfer */
-#define USB_EP_TX_DIS ((uint32_t)0x00000000) /*!< EndPoint TX DISabled */
-#define USB_EP_TX_STALL ((uint32_t)0x00000010) /*!< EndPoint TX STALLed */
-#define USB_EP_TX_NAK ((uint32_t)0x00000020) /*!< EndPoint TX NAKed */
-#define USB_EP_TX_VALID ((uint32_t)0x00000030) /*!< EndPoint TX VALID */
-#define USB_EPTX_DTOG1 ((uint32_t)0x00000010) /*!< EndPoint TX Data TOGgle bit1 */
-#define USB_EPTX_DTOG2 ((uint32_t)0x00000020) /*!< EndPoint TX Data TOGgle bit2 */
-#define USB_EPTX_DTOGMASK (USB_EPTX_STAT|USB_EPREG_MASK)
- /*!< STAT_RX[1:0] STATus for RX transfer */
-#define USB_EP_RX_DIS ((uint32_t)0x00000000) /*!< EndPoint RX DISabled */
-#define USB_EP_RX_STALL ((uint32_t)0x00001000) /*!< EndPoint RX STALLed */
-#define USB_EP_RX_NAK ((uint32_t)0x00002000) /*!< EndPoint RX NAKed */
-#define USB_EP_RX_VALID ((uint32_t)0x00003000) /*!< EndPoint RX VALID */
-#define USB_EPRX_DTOG1 ((uint32_t)0x00001000) /*!< EndPoint RX Data TOGgle bit1 */
-#define USB_EPRX_DTOG2 ((uint32_t)0x00002000) /*!< EndPoint RX Data TOGgle bit1 */
-#define USB_EPRX_DTOGMASK (USB_EPRX_STAT|USB_EPREG_MASK)
-
-/******************* Bit definition for USB_EP0R register *******************/
-#define USB_EP0R_EA_Pos (0U)
-#define USB_EP0R_EA_Msk (0xFU << USB_EP0R_EA_Pos) /*!< 0x0000000F */
-#define USB_EP0R_EA USB_EP0R_EA_Msk /*!< Endpoint Address */
-
-#define USB_EP0R_STAT_TX_Pos (4U)
-#define USB_EP0R_STAT_TX_Msk (0x3U << USB_EP0R_STAT_TX_Pos) /*!< 0x00000030 */
-#define USB_EP0R_STAT_TX USB_EP0R_STAT_TX_Msk /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
-#define USB_EP0R_STAT_TX_0 (0x1U << USB_EP0R_STAT_TX_Pos) /*!< 0x00000010 */
-#define USB_EP0R_STAT_TX_1 (0x2U << USB_EP0R_STAT_TX_Pos) /*!< 0x00000020 */
-
-#define USB_EP0R_DTOG_TX_Pos (6U)
-#define USB_EP0R_DTOG_TX_Msk (0x1U << USB_EP0R_DTOG_TX_Pos) /*!< 0x00000040 */
-#define USB_EP0R_DTOG_TX USB_EP0R_DTOG_TX_Msk /*!< Data Toggle, for transmission transfers */
-#define USB_EP0R_CTR_TX_Pos (7U)
-#define USB_EP0R_CTR_TX_Msk (0x1U << USB_EP0R_CTR_TX_Pos) /*!< 0x00000080 */
-#define USB_EP0R_CTR_TX USB_EP0R_CTR_TX_Msk /*!< Correct Transfer for transmission */
-#define USB_EP0R_EP_KIND_Pos (8U)
-#define USB_EP0R_EP_KIND_Msk (0x1U << USB_EP0R_EP_KIND_Pos) /*!< 0x00000100 */
-#define USB_EP0R_EP_KIND USB_EP0R_EP_KIND_Msk /*!< Endpoint Kind */
-
-#define USB_EP0R_EP_TYPE_Pos (9U)
-#define USB_EP0R_EP_TYPE_Msk (0x3U << USB_EP0R_EP_TYPE_Pos) /*!< 0x00000600 */
-#define USB_EP0R_EP_TYPE USB_EP0R_EP_TYPE_Msk /*!< EP_TYPE[1:0] bits (Endpoint type) */
-#define USB_EP0R_EP_TYPE_0 (0x1U << USB_EP0R_EP_TYPE_Pos) /*!< 0x00000200 */
-#define USB_EP0R_EP_TYPE_1 (0x2U << USB_EP0R_EP_TYPE_Pos) /*!< 0x00000400 */
-
-#define USB_EP0R_SETUP_Pos (11U)
-#define USB_EP0R_SETUP_Msk (0x1U << USB_EP0R_SETUP_Pos) /*!< 0x00000800 */
-#define USB_EP0R_SETUP USB_EP0R_SETUP_Msk /*!< Setup transaction completed */
-
-#define USB_EP0R_STAT_RX_Pos (12U)
-#define USB_EP0R_STAT_RX_Msk (0x3U << USB_EP0R_STAT_RX_Pos) /*!< 0x00003000 */
-#define USB_EP0R_STAT_RX USB_EP0R_STAT_RX_Msk /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
-#define USB_EP0R_STAT_RX_0 (0x1U << USB_EP0R_STAT_RX_Pos) /*!< 0x00001000 */
-#define USB_EP0R_STAT_RX_1 (0x2U << USB_EP0R_STAT_RX_Pos) /*!< 0x00002000 */
-
-#define USB_EP0R_DTOG_RX_Pos (14U)
-#define USB_EP0R_DTOG_RX_Msk (0x1U << USB_EP0R_DTOG_RX_Pos) /*!< 0x00004000 */
-#define USB_EP0R_DTOG_RX USB_EP0R_DTOG_RX_Msk /*!< Data Toggle, for reception transfers */
-#define USB_EP0R_CTR_RX_Pos (15U)
-#define USB_EP0R_CTR_RX_Msk (0x1U << USB_EP0R_CTR_RX_Pos) /*!< 0x00008000 */
-#define USB_EP0R_CTR_RX USB_EP0R_CTR_RX_Msk /*!< Correct Transfer for reception */
-
-/******************* Bit definition for USB_EP1R register *******************/
-#define USB_EP1R_EA_Pos (0U)
-#define USB_EP1R_EA_Msk (0xFU << USB_EP1R_EA_Pos) /*!< 0x0000000F */
-#define USB_EP1R_EA USB_EP1R_EA_Msk /*!< Endpoint Address */
-
-#define USB_EP1R_STAT_TX_Pos (4U)
-#define USB_EP1R_STAT_TX_Msk (0x3U << USB_EP1R_STAT_TX_Pos) /*!< 0x00000030 */
-#define USB_EP1R_STAT_TX USB_EP1R_STAT_TX_Msk /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
-#define USB_EP1R_STAT_TX_0 (0x1U << USB_EP1R_STAT_TX_Pos) /*!< 0x00000010 */
-#define USB_EP1R_STAT_TX_1 (0x2U << USB_EP1R_STAT_TX_Pos) /*!< 0x00000020 */
-
-#define USB_EP1R_DTOG_TX_Pos (6U)
-#define USB_EP1R_DTOG_TX_Msk (0x1U << USB_EP1R_DTOG_TX_Pos) /*!< 0x00000040 */
-#define USB_EP1R_DTOG_TX USB_EP1R_DTOG_TX_Msk /*!< Data Toggle, for transmission transfers */
-#define USB_EP1R_CTR_TX_Pos (7U)
-#define USB_EP1R_CTR_TX_Msk (0x1U << USB_EP1R_CTR_TX_Pos) /*!< 0x00000080 */
-#define USB_EP1R_CTR_TX USB_EP1R_CTR_TX_Msk /*!< Correct Transfer for transmission */
-#define USB_EP1R_EP_KIND_Pos (8U)
-#define USB_EP1R_EP_KIND_Msk (0x1U << USB_EP1R_EP_KIND_Pos) /*!< 0x00000100 */
-#define USB_EP1R_EP_KIND USB_EP1R_EP_KIND_Msk /*!< Endpoint Kind */
-
-#define USB_EP1R_EP_TYPE_Pos (9U)
-#define USB_EP1R_EP_TYPE_Msk (0x3U << USB_EP1R_EP_TYPE_Pos) /*!< 0x00000600 */
-#define USB_EP1R_EP_TYPE USB_EP1R_EP_TYPE_Msk /*!< EP_TYPE[1:0] bits (Endpoint type) */
-#define USB_EP1R_EP_TYPE_0 (0x1U << USB_EP1R_EP_TYPE_Pos) /*!< 0x00000200 */
-#define USB_EP1R_EP_TYPE_1 (0x2U << USB_EP1R_EP_TYPE_Pos) /*!< 0x00000400 */
-
-#define USB_EP1R_SETUP_Pos (11U)
-#define USB_EP1R_SETUP_Msk (0x1U << USB_EP1R_SETUP_Pos) /*!< 0x00000800 */
-#define USB_EP1R_SETUP USB_EP1R_SETUP_Msk /*!< Setup transaction completed */
-
-#define USB_EP1R_STAT_RX_Pos (12U)
-#define USB_EP1R_STAT_RX_Msk (0x3U << USB_EP1R_STAT_RX_Pos) /*!< 0x00003000 */
-#define USB_EP1R_STAT_RX USB_EP1R_STAT_RX_Msk /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
-#define USB_EP1R_STAT_RX_0 (0x1U << USB_EP1R_STAT_RX_Pos) /*!< 0x00001000 */
-#define USB_EP1R_STAT_RX_1 (0x2U << USB_EP1R_STAT_RX_Pos) /*!< 0x00002000 */
-
-#define USB_EP1R_DTOG_RX_Pos (14U)
-#define USB_EP1R_DTOG_RX_Msk (0x1U << USB_EP1R_DTOG_RX_Pos) /*!< 0x00004000 */
-#define USB_EP1R_DTOG_RX USB_EP1R_DTOG_RX_Msk /*!< Data Toggle, for reception transfers */
-#define USB_EP1R_CTR_RX_Pos (15U)
-#define USB_EP1R_CTR_RX_Msk (0x1U << USB_EP1R_CTR_RX_Pos) /*!< 0x00008000 */
-#define USB_EP1R_CTR_RX USB_EP1R_CTR_RX_Msk /*!< Correct Transfer for reception */
-
-/******************* Bit definition for USB_EP2R register *******************/
-#define USB_EP2R_EA_Pos (0U)
-#define USB_EP2R_EA_Msk (0xFU << USB_EP2R_EA_Pos) /*!< 0x0000000F */
-#define USB_EP2R_EA USB_EP2R_EA_Msk /*!< Endpoint Address */
-
-#define USB_EP2R_STAT_TX_Pos (4U)
-#define USB_EP2R_STAT_TX_Msk (0x3U << USB_EP2R_STAT_TX_Pos) /*!< 0x00000030 */
-#define USB_EP2R_STAT_TX USB_EP2R_STAT_TX_Msk /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
-#define USB_EP2R_STAT_TX_0 (0x1U << USB_EP2R_STAT_TX_Pos) /*!< 0x00000010 */
-#define USB_EP2R_STAT_TX_1 (0x2U << USB_EP2R_STAT_TX_Pos) /*!< 0x00000020 */
-
-#define USB_EP2R_DTOG_TX_Pos (6U)
-#define USB_EP2R_DTOG_TX_Msk (0x1U << USB_EP2R_DTOG_TX_Pos) /*!< 0x00000040 */
-#define USB_EP2R_DTOG_TX USB_EP2R_DTOG_TX_Msk /*!< Data Toggle, for transmission transfers */
-#define USB_EP2R_CTR_TX_Pos (7U)
-#define USB_EP2R_CTR_TX_Msk (0x1U << USB_EP2R_CTR_TX_Pos) /*!< 0x00000080 */
-#define USB_EP2R_CTR_TX USB_EP2R_CTR_TX_Msk /*!< Correct Transfer for transmission */
-#define USB_EP2R_EP_KIND_Pos (8U)
-#define USB_EP2R_EP_KIND_Msk (0x1U << USB_EP2R_EP_KIND_Pos) /*!< 0x00000100 */
-#define USB_EP2R_EP_KIND USB_EP2R_EP_KIND_Msk /*!< Endpoint Kind */
-
-#define USB_EP2R_EP_TYPE_Pos (9U)
-#define USB_EP2R_EP_TYPE_Msk (0x3U << USB_EP2R_EP_TYPE_Pos) /*!< 0x00000600 */
-#define USB_EP2R_EP_TYPE USB_EP2R_EP_TYPE_Msk /*!< EP_TYPE[1:0] bits (Endpoint type) */
-#define USB_EP2R_EP_TYPE_0 (0x1U << USB_EP2R_EP_TYPE_Pos) /*!< 0x00000200 */
-#define USB_EP2R_EP_TYPE_1 (0x2U << USB_EP2R_EP_TYPE_Pos) /*!< 0x00000400 */
-
-#define USB_EP2R_SETUP_Pos (11U)
-#define USB_EP2R_SETUP_Msk (0x1U << USB_EP2R_SETUP_Pos) /*!< 0x00000800 */
-#define USB_EP2R_SETUP USB_EP2R_SETUP_Msk /*!< Setup transaction completed */
-
-#define USB_EP2R_STAT_RX_Pos (12U)
-#define USB_EP2R_STAT_RX_Msk (0x3U << USB_EP2R_STAT_RX_Pos) /*!< 0x00003000 */
-#define USB_EP2R_STAT_RX USB_EP2R_STAT_RX_Msk /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
-#define USB_EP2R_STAT_RX_0 (0x1U << USB_EP2R_STAT_RX_Pos) /*!< 0x00001000 */
-#define USB_EP2R_STAT_RX_1 (0x2U << USB_EP2R_STAT_RX_Pos) /*!< 0x00002000 */
-
-#define USB_EP2R_DTOG_RX_Pos (14U)
-#define USB_EP2R_DTOG_RX_Msk (0x1U << USB_EP2R_DTOG_RX_Pos) /*!< 0x00004000 */
-#define USB_EP2R_DTOG_RX USB_EP2R_DTOG_RX_Msk /*!< Data Toggle, for reception transfers */
-#define USB_EP2R_CTR_RX_Pos (15U)
-#define USB_EP2R_CTR_RX_Msk (0x1U << USB_EP2R_CTR_RX_Pos) /*!< 0x00008000 */
-#define USB_EP2R_CTR_RX USB_EP2R_CTR_RX_Msk /*!< Correct Transfer for reception */
-
-/******************* Bit definition for USB_EP3R register *******************/
-#define USB_EP3R_EA_Pos (0U)
-#define USB_EP3R_EA_Msk (0xFU << USB_EP3R_EA_Pos) /*!< 0x0000000F */
-#define USB_EP3R_EA USB_EP3R_EA_Msk /*!< Endpoint Address */
-
-#define USB_EP3R_STAT_TX_Pos (4U)
-#define USB_EP3R_STAT_TX_Msk (0x3U << USB_EP3R_STAT_TX_Pos) /*!< 0x00000030 */
-#define USB_EP3R_STAT_TX USB_EP3R_STAT_TX_Msk /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
-#define USB_EP3R_STAT_TX_0 (0x1U << USB_EP3R_STAT_TX_Pos) /*!< 0x00000010 */
-#define USB_EP3R_STAT_TX_1 (0x2U << USB_EP3R_STAT_TX_Pos) /*!< 0x00000020 */
-
-#define USB_EP3R_DTOG_TX_Pos (6U)
-#define USB_EP3R_DTOG_TX_Msk (0x1U << USB_EP3R_DTOG_TX_Pos) /*!< 0x00000040 */
-#define USB_EP3R_DTOG_TX USB_EP3R_DTOG_TX_Msk /*!< Data Toggle, for transmission transfers */
-#define USB_EP3R_CTR_TX_Pos (7U)
-#define USB_EP3R_CTR_TX_Msk (0x1U << USB_EP3R_CTR_TX_Pos) /*!< 0x00000080 */
-#define USB_EP3R_CTR_TX USB_EP3R_CTR_TX_Msk /*!< Correct Transfer for transmission */
-#define USB_EP3R_EP_KIND_Pos (8U)
-#define USB_EP3R_EP_KIND_Msk (0x1U << USB_EP3R_EP_KIND_Pos) /*!< 0x00000100 */
-#define USB_EP3R_EP_KIND USB_EP3R_EP_KIND_Msk /*!< Endpoint Kind */
-
-#define USB_EP3R_EP_TYPE_Pos (9U)
-#define USB_EP3R_EP_TYPE_Msk (0x3U << USB_EP3R_EP_TYPE_Pos) /*!< 0x00000600 */
-#define USB_EP3R_EP_TYPE USB_EP3R_EP_TYPE_Msk /*!< EP_TYPE[1:0] bits (Endpoint type) */
-#define USB_EP3R_EP_TYPE_0 (0x1U << USB_EP3R_EP_TYPE_Pos) /*!< 0x00000200 */
-#define USB_EP3R_EP_TYPE_1 (0x2U << USB_EP3R_EP_TYPE_Pos) /*!< 0x00000400 */
-
-#define USB_EP3R_SETUP_Pos (11U)
-#define USB_EP3R_SETUP_Msk (0x1U << USB_EP3R_SETUP_Pos) /*!< 0x00000800 */
-#define USB_EP3R_SETUP USB_EP3R_SETUP_Msk /*!< Setup transaction completed */
-
-#define USB_EP3R_STAT_RX_Pos (12U)
-#define USB_EP3R_STAT_RX_Msk (0x3U << USB_EP3R_STAT_RX_Pos) /*!< 0x00003000 */
-#define USB_EP3R_STAT_RX USB_EP3R_STAT_RX_Msk /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
-#define USB_EP3R_STAT_RX_0 (0x1U << USB_EP3R_STAT_RX_Pos) /*!< 0x00001000 */
-#define USB_EP3R_STAT_RX_1 (0x2U << USB_EP3R_STAT_RX_Pos) /*!< 0x00002000 */
-
-#define USB_EP3R_DTOG_RX_Pos (14U)
-#define USB_EP3R_DTOG_RX_Msk (0x1U << USB_EP3R_DTOG_RX_Pos) /*!< 0x00004000 */
-#define USB_EP3R_DTOG_RX USB_EP3R_DTOG_RX_Msk /*!< Data Toggle, for reception transfers */
-#define USB_EP3R_CTR_RX_Pos (15U)
-#define USB_EP3R_CTR_RX_Msk (0x1U << USB_EP3R_CTR_RX_Pos) /*!< 0x00008000 */
-#define USB_EP3R_CTR_RX USB_EP3R_CTR_RX_Msk /*!< Correct Transfer for reception */
-
-/******************* Bit definition for USB_EP4R register *******************/
-#define USB_EP4R_EA_Pos (0U)
-#define USB_EP4R_EA_Msk (0xFU << USB_EP4R_EA_Pos) /*!< 0x0000000F */
-#define USB_EP4R_EA USB_EP4R_EA_Msk /*!< Endpoint Address */
-
-#define USB_EP4R_STAT_TX_Pos (4U)
-#define USB_EP4R_STAT_TX_Msk (0x3U << USB_EP4R_STAT_TX_Pos) /*!< 0x00000030 */
-#define USB_EP4R_STAT_TX USB_EP4R_STAT_TX_Msk /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
-#define USB_EP4R_STAT_TX_0 (0x1U << USB_EP4R_STAT_TX_Pos) /*!< 0x00000010 */
-#define USB_EP4R_STAT_TX_1 (0x2U << USB_EP4R_STAT_TX_Pos) /*!< 0x00000020 */
-
-#define USB_EP4R_DTOG_TX_Pos (6U)
-#define USB_EP4R_DTOG_TX_Msk (0x1U << USB_EP4R_DTOG_TX_Pos) /*!< 0x00000040 */
-#define USB_EP4R_DTOG_TX USB_EP4R_DTOG_TX_Msk /*!< Data Toggle, for transmission transfers */
-#define USB_EP4R_CTR_TX_Pos (7U)
-#define USB_EP4R_CTR_TX_Msk (0x1U << USB_EP4R_CTR_TX_Pos) /*!< 0x00000080 */
-#define USB_EP4R_CTR_TX USB_EP4R_CTR_TX_Msk /*!< Correct Transfer for transmission */
-#define USB_EP4R_EP_KIND_Pos (8U)
-#define USB_EP4R_EP_KIND_Msk (0x1U << USB_EP4R_EP_KIND_Pos) /*!< 0x00000100 */
-#define USB_EP4R_EP_KIND USB_EP4R_EP_KIND_Msk /*!< Endpoint Kind */
-
-#define USB_EP4R_EP_TYPE_Pos (9U)
-#define USB_EP4R_EP_TYPE_Msk (0x3U << USB_EP4R_EP_TYPE_Pos) /*!< 0x00000600 */
-#define USB_EP4R_EP_TYPE USB_EP4R_EP_TYPE_Msk /*!< EP_TYPE[1:0] bits (Endpoint type) */
-#define USB_EP4R_EP_TYPE_0 (0x1U << USB_EP4R_EP_TYPE_Pos) /*!< 0x00000200 */
-#define USB_EP4R_EP_TYPE_1 (0x2U << USB_EP4R_EP_TYPE_Pos) /*!< 0x00000400 */
-
-#define USB_EP4R_SETUP_Pos (11U)
-#define USB_EP4R_SETUP_Msk (0x1U << USB_EP4R_SETUP_Pos) /*!< 0x00000800 */
-#define USB_EP4R_SETUP USB_EP4R_SETUP_Msk /*!< Setup transaction completed */
-
-#define USB_EP4R_STAT_RX_Pos (12U)
-#define USB_EP4R_STAT_RX_Msk (0x3U << USB_EP4R_STAT_RX_Pos) /*!< 0x00003000 */
-#define USB_EP4R_STAT_RX USB_EP4R_STAT_RX_Msk /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
-#define USB_EP4R_STAT_RX_0 (0x1U << USB_EP4R_STAT_RX_Pos) /*!< 0x00001000 */
-#define USB_EP4R_STAT_RX_1 (0x2U << USB_EP4R_STAT_RX_Pos) /*!< 0x00002000 */
-
-#define USB_EP4R_DTOG_RX_Pos (14U)
-#define USB_EP4R_DTOG_RX_Msk (0x1U << USB_EP4R_DTOG_RX_Pos) /*!< 0x00004000 */
-#define USB_EP4R_DTOG_RX USB_EP4R_DTOG_RX_Msk /*!< Data Toggle, for reception transfers */
-#define USB_EP4R_CTR_RX_Pos (15U)
-#define USB_EP4R_CTR_RX_Msk (0x1U << USB_EP4R_CTR_RX_Pos) /*!< 0x00008000 */
-#define USB_EP4R_CTR_RX USB_EP4R_CTR_RX_Msk /*!< Correct Transfer for reception */
-
-/******************* Bit definition for USB_EP5R register *******************/
-#define USB_EP5R_EA_Pos (0U)
-#define USB_EP5R_EA_Msk (0xFU << USB_EP5R_EA_Pos) /*!< 0x0000000F */
-#define USB_EP5R_EA USB_EP5R_EA_Msk /*!< Endpoint Address */
-
-#define USB_EP5R_STAT_TX_Pos (4U)
-#define USB_EP5R_STAT_TX_Msk (0x3U << USB_EP5R_STAT_TX_Pos) /*!< 0x00000030 */
-#define USB_EP5R_STAT_TX USB_EP5R_STAT_TX_Msk /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
-#define USB_EP5R_STAT_TX_0 (0x1U << USB_EP5R_STAT_TX_Pos) /*!< 0x00000010 */
-#define USB_EP5R_STAT_TX_1 (0x2U << USB_EP5R_STAT_TX_Pos) /*!< 0x00000020 */
-
-#define USB_EP5R_DTOG_TX_Pos (6U)
-#define USB_EP5R_DTOG_TX_Msk (0x1U << USB_EP5R_DTOG_TX_Pos) /*!< 0x00000040 */
-#define USB_EP5R_DTOG_TX USB_EP5R_DTOG_TX_Msk /*!< Data Toggle, for transmission transfers */
-#define USB_EP5R_CTR_TX_Pos (7U)
-#define USB_EP5R_CTR_TX_Msk (0x1U << USB_EP5R_CTR_TX_Pos) /*!< 0x00000080 */
-#define USB_EP5R_CTR_TX USB_EP5R_CTR_TX_Msk /*!< Correct Transfer for transmission */
-#define USB_EP5R_EP_KIND_Pos (8U)
-#define USB_EP5R_EP_KIND_Msk (0x1U << USB_EP5R_EP_KIND_Pos) /*!< 0x00000100 */
-#define USB_EP5R_EP_KIND USB_EP5R_EP_KIND_Msk /*!< Endpoint Kind */
-
-#define USB_EP5R_EP_TYPE_Pos (9U)
-#define USB_EP5R_EP_TYPE_Msk (0x3U << USB_EP5R_EP_TYPE_Pos) /*!< 0x00000600 */
-#define USB_EP5R_EP_TYPE USB_EP5R_EP_TYPE_Msk /*!< EP_TYPE[1:0] bits (Endpoint type) */
-#define USB_EP5R_EP_TYPE_0 (0x1U << USB_EP5R_EP_TYPE_Pos) /*!< 0x00000200 */
-#define USB_EP5R_EP_TYPE_1 (0x2U << USB_EP5R_EP_TYPE_Pos) /*!< 0x00000400 */
-
-#define USB_EP5R_SETUP_Pos (11U)
-#define USB_EP5R_SETUP_Msk (0x1U << USB_EP5R_SETUP_Pos) /*!< 0x00000800 */
-#define USB_EP5R_SETUP USB_EP5R_SETUP_Msk /*!< Setup transaction completed */
-
-#define USB_EP5R_STAT_RX_Pos (12U)
-#define USB_EP5R_STAT_RX_Msk (0x3U << USB_EP5R_STAT_RX_Pos) /*!< 0x00003000 */
-#define USB_EP5R_STAT_RX USB_EP5R_STAT_RX_Msk /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
-#define USB_EP5R_STAT_RX_0 (0x1U << USB_EP5R_STAT_RX_Pos) /*!< 0x00001000 */
-#define USB_EP5R_STAT_RX_1 (0x2U << USB_EP5R_STAT_RX_Pos) /*!< 0x00002000 */
-
-#define USB_EP5R_DTOG_RX_Pos (14U)
-#define USB_EP5R_DTOG_RX_Msk (0x1U << USB_EP5R_DTOG_RX_Pos) /*!< 0x00004000 */
-#define USB_EP5R_DTOG_RX USB_EP5R_DTOG_RX_Msk /*!< Data Toggle, for reception transfers */
-#define USB_EP5R_CTR_RX_Pos (15U)
-#define USB_EP5R_CTR_RX_Msk (0x1U << USB_EP5R_CTR_RX_Pos) /*!< 0x00008000 */
-#define USB_EP5R_CTR_RX USB_EP5R_CTR_RX_Msk /*!< Correct Transfer for reception */
-
-/******************* Bit definition for USB_EP6R register *******************/
-#define USB_EP6R_EA_Pos (0U)
-#define USB_EP6R_EA_Msk (0xFU << USB_EP6R_EA_Pos) /*!< 0x0000000F */
-#define USB_EP6R_EA USB_EP6R_EA_Msk /*!< Endpoint Address */
-
-#define USB_EP6R_STAT_TX_Pos (4U)
-#define USB_EP6R_STAT_TX_Msk (0x3U << USB_EP6R_STAT_TX_Pos) /*!< 0x00000030 */
-#define USB_EP6R_STAT_TX USB_EP6R_STAT_TX_Msk /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
-#define USB_EP6R_STAT_TX_0 (0x1U << USB_EP6R_STAT_TX_Pos) /*!< 0x00000010 */
-#define USB_EP6R_STAT_TX_1 (0x2U << USB_EP6R_STAT_TX_Pos) /*!< 0x00000020 */
-
-#define USB_EP6R_DTOG_TX_Pos (6U)
-#define USB_EP6R_DTOG_TX_Msk (0x1U << USB_EP6R_DTOG_TX_Pos) /*!< 0x00000040 */
-#define USB_EP6R_DTOG_TX USB_EP6R_DTOG_TX_Msk /*!< Data Toggle, for transmission transfers */
-#define USB_EP6R_CTR_TX_Pos (7U)
-#define USB_EP6R_CTR_TX_Msk (0x1U << USB_EP6R_CTR_TX_Pos) /*!< 0x00000080 */
-#define USB_EP6R_CTR_TX USB_EP6R_CTR_TX_Msk /*!< Correct Transfer for transmission */
-#define USB_EP6R_EP_KIND_Pos (8U)
-#define USB_EP6R_EP_KIND_Msk (0x1U << USB_EP6R_EP_KIND_Pos) /*!< 0x00000100 */
-#define USB_EP6R_EP_KIND USB_EP6R_EP_KIND_Msk /*!< Endpoint Kind */
-
-#define USB_EP6R_EP_TYPE_Pos (9U)
-#define USB_EP6R_EP_TYPE_Msk (0x3U << USB_EP6R_EP_TYPE_Pos) /*!< 0x00000600 */
-#define USB_EP6R_EP_TYPE USB_EP6R_EP_TYPE_Msk /*!< EP_TYPE[1:0] bits (Endpoint type) */
-#define USB_EP6R_EP_TYPE_0 (0x1U << USB_EP6R_EP_TYPE_Pos) /*!< 0x00000200 */
-#define USB_EP6R_EP_TYPE_1 (0x2U << USB_EP6R_EP_TYPE_Pos) /*!< 0x00000400 */
-
-#define USB_EP6R_SETUP_Pos (11U)
-#define USB_EP6R_SETUP_Msk (0x1U << USB_EP6R_SETUP_Pos) /*!< 0x00000800 */
-#define USB_EP6R_SETUP USB_EP6R_SETUP_Msk /*!< Setup transaction completed */
-
-#define USB_EP6R_STAT_RX_Pos (12U)
-#define USB_EP6R_STAT_RX_Msk (0x3U << USB_EP6R_STAT_RX_Pos) /*!< 0x00003000 */
-#define USB_EP6R_STAT_RX USB_EP6R_STAT_RX_Msk /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
-#define USB_EP6R_STAT_RX_0 (0x1U << USB_EP6R_STAT_RX_Pos) /*!< 0x00001000 */
-#define USB_EP6R_STAT_RX_1 (0x2U << USB_EP6R_STAT_RX_Pos) /*!< 0x00002000 */
-
-#define USB_EP6R_DTOG_RX_Pos (14U)
-#define USB_EP6R_DTOG_RX_Msk (0x1U << USB_EP6R_DTOG_RX_Pos) /*!< 0x00004000 */
-#define USB_EP6R_DTOG_RX USB_EP6R_DTOG_RX_Msk /*!< Data Toggle, for reception transfers */
-#define USB_EP6R_CTR_RX_Pos (15U)
-#define USB_EP6R_CTR_RX_Msk (0x1U << USB_EP6R_CTR_RX_Pos) /*!< 0x00008000 */
-#define USB_EP6R_CTR_RX USB_EP6R_CTR_RX_Msk /*!< Correct Transfer for reception */
-
-/******************* Bit definition for USB_EP7R register *******************/
-#define USB_EP7R_EA_Pos (0U)
-#define USB_EP7R_EA_Msk (0xFU << USB_EP7R_EA_Pos) /*!< 0x0000000F */
-#define USB_EP7R_EA USB_EP7R_EA_Msk /*!< Endpoint Address */
-
-#define USB_EP7R_STAT_TX_Pos (4U)
-#define USB_EP7R_STAT_TX_Msk (0x3U << USB_EP7R_STAT_TX_Pos) /*!< 0x00000030 */
-#define USB_EP7R_STAT_TX USB_EP7R_STAT_TX_Msk /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
-#define USB_EP7R_STAT_TX_0 (0x1U << USB_EP7R_STAT_TX_Pos) /*!< 0x00000010 */
-#define USB_EP7R_STAT_TX_1 (0x2U << USB_EP7R_STAT_TX_Pos) /*!< 0x00000020 */
-
-#define USB_EP7R_DTOG_TX_Pos (6U)
-#define USB_EP7R_DTOG_TX_Msk (0x1U << USB_EP7R_DTOG_TX_Pos) /*!< 0x00000040 */
-#define USB_EP7R_DTOG_TX USB_EP7R_DTOG_TX_Msk /*!< Data Toggle, for transmission transfers */
-#define USB_EP7R_CTR_TX_Pos (7U)
-#define USB_EP7R_CTR_TX_Msk (0x1U << USB_EP7R_CTR_TX_Pos) /*!< 0x00000080 */
-#define USB_EP7R_CTR_TX USB_EP7R_CTR_TX_Msk /*!< Correct Transfer for transmission */
-#define USB_EP7R_EP_KIND_Pos (8U)
-#define USB_EP7R_EP_KIND_Msk (0x1U << USB_EP7R_EP_KIND_Pos) /*!< 0x00000100 */
-#define USB_EP7R_EP_KIND USB_EP7R_EP_KIND_Msk /*!< Endpoint Kind */
-
-#define USB_EP7R_EP_TYPE_Pos (9U)
-#define USB_EP7R_EP_TYPE_Msk (0x3U << USB_EP7R_EP_TYPE_Pos) /*!< 0x00000600 */
-#define USB_EP7R_EP_TYPE USB_EP7R_EP_TYPE_Msk /*!< EP_TYPE[1:0] bits (Endpoint type) */
-#define USB_EP7R_EP_TYPE_0 (0x1U << USB_EP7R_EP_TYPE_Pos) /*!< 0x00000200 */
-#define USB_EP7R_EP_TYPE_1 (0x2U << USB_EP7R_EP_TYPE_Pos) /*!< 0x00000400 */
-
-#define USB_EP7R_SETUP_Pos (11U)
-#define USB_EP7R_SETUP_Msk (0x1U << USB_EP7R_SETUP_Pos) /*!< 0x00000800 */
-#define USB_EP7R_SETUP USB_EP7R_SETUP_Msk /*!< Setup transaction completed */
-
-#define USB_EP7R_STAT_RX_Pos (12U)
-#define USB_EP7R_STAT_RX_Msk (0x3U << USB_EP7R_STAT_RX_Pos) /*!< 0x00003000 */
-#define USB_EP7R_STAT_RX USB_EP7R_STAT_RX_Msk /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
-#define USB_EP7R_STAT_RX_0 (0x1U << USB_EP7R_STAT_RX_Pos) /*!< 0x00001000 */
-#define USB_EP7R_STAT_RX_1 (0x2U << USB_EP7R_STAT_RX_Pos) /*!< 0x00002000 */
-
-#define USB_EP7R_DTOG_RX_Pos (14U)
-#define USB_EP7R_DTOG_RX_Msk (0x1U << USB_EP7R_DTOG_RX_Pos) /*!< 0x00004000 */
-#define USB_EP7R_DTOG_RX USB_EP7R_DTOG_RX_Msk /*!< Data Toggle, for reception transfers */
-#define USB_EP7R_CTR_RX_Pos (15U)
-#define USB_EP7R_CTR_RX_Msk (0x1U << USB_EP7R_CTR_RX_Pos) /*!< 0x00008000 */
-#define USB_EP7R_CTR_RX USB_EP7R_CTR_RX_Msk /*!< Correct Transfer for reception */
-
-/*!< Common registers */
-/******************* Bit definition for USB_CNTR register *******************/
-#define USB_CNTR_FRES_Pos (0U)
-#define USB_CNTR_FRES_Msk (0x1U << USB_CNTR_FRES_Pos) /*!< 0x00000001 */
-#define USB_CNTR_FRES USB_CNTR_FRES_Msk /*!< Force USB Reset */
-#define USB_CNTR_PDWN_Pos (1U)
-#define USB_CNTR_PDWN_Msk (0x1U << USB_CNTR_PDWN_Pos) /*!< 0x00000002 */
-#define USB_CNTR_PDWN USB_CNTR_PDWN_Msk /*!< Power down */
-#define USB_CNTR_LP_MODE_Pos (2U)
-#define USB_CNTR_LP_MODE_Msk (0x1U << USB_CNTR_LP_MODE_Pos) /*!< 0x00000004 */
-#define USB_CNTR_LP_MODE USB_CNTR_LP_MODE_Msk /*!< Low-power mode */
-#define USB_CNTR_FSUSP_Pos (3U)
-#define USB_CNTR_FSUSP_Msk (0x1U << USB_CNTR_FSUSP_Pos) /*!< 0x00000008 */
-#define USB_CNTR_FSUSP USB_CNTR_FSUSP_Msk /*!< Force suspend */
-#define USB_CNTR_RESUME_Pos (4U)
-#define USB_CNTR_RESUME_Msk (0x1U << USB_CNTR_RESUME_Pos) /*!< 0x00000010 */
-#define USB_CNTR_RESUME USB_CNTR_RESUME_Msk /*!< Resume request */
-#define USB_CNTR_ESOFM_Pos (8U)
-#define USB_CNTR_ESOFM_Msk (0x1U << USB_CNTR_ESOFM_Pos) /*!< 0x00000100 */
-#define USB_CNTR_ESOFM USB_CNTR_ESOFM_Msk /*!< Expected Start Of Frame Interrupt Mask */
-#define USB_CNTR_SOFM_Pos (9U)
-#define USB_CNTR_SOFM_Msk (0x1U << USB_CNTR_SOFM_Pos) /*!< 0x00000200 */
-#define USB_CNTR_SOFM USB_CNTR_SOFM_Msk /*!< Start Of Frame Interrupt Mask */
-#define USB_CNTR_RESETM_Pos (10U)
-#define USB_CNTR_RESETM_Msk (0x1U << USB_CNTR_RESETM_Pos) /*!< 0x00000400 */
-#define USB_CNTR_RESETM USB_CNTR_RESETM_Msk /*!< RESET Interrupt Mask */
-#define USB_CNTR_SUSPM_Pos (11U)
-#define USB_CNTR_SUSPM_Msk (0x1U << USB_CNTR_SUSPM_Pos) /*!< 0x00000800 */
-#define USB_CNTR_SUSPM USB_CNTR_SUSPM_Msk /*!< Suspend mode Interrupt Mask */
-#define USB_CNTR_WKUPM_Pos (12U)
-#define USB_CNTR_WKUPM_Msk (0x1U << USB_CNTR_WKUPM_Pos) /*!< 0x00001000 */
-#define USB_CNTR_WKUPM USB_CNTR_WKUPM_Msk /*!< Wakeup Interrupt Mask */
-#define USB_CNTR_ERRM_Pos (13U)
-#define USB_CNTR_ERRM_Msk (0x1U << USB_CNTR_ERRM_Pos) /*!< 0x00002000 */
-#define USB_CNTR_ERRM USB_CNTR_ERRM_Msk /*!< Error Interrupt Mask */
-#define USB_CNTR_PMAOVRM_Pos (14U)
-#define USB_CNTR_PMAOVRM_Msk (0x1U << USB_CNTR_PMAOVRM_Pos) /*!< 0x00004000 */
-#define USB_CNTR_PMAOVRM USB_CNTR_PMAOVRM_Msk /*!< Packet Memory Area Over / Underrun Interrupt Mask */
-#define USB_CNTR_CTRM_Pos (15U)
-#define USB_CNTR_CTRM_Msk (0x1U << USB_CNTR_CTRM_Pos) /*!< 0x00008000 */
-#define USB_CNTR_CTRM USB_CNTR_CTRM_Msk /*!< Correct Transfer Interrupt Mask */
-
-/******************* Bit definition for USB_ISTR register *******************/
-#define USB_ISTR_EP_ID_Pos (0U)
-#define USB_ISTR_EP_ID_Msk (0xFU << USB_ISTR_EP_ID_Pos) /*!< 0x0000000F */
-#define USB_ISTR_EP_ID USB_ISTR_EP_ID_Msk /*!< Endpoint Identifier */
-#define USB_ISTR_DIR_Pos (4U)
-#define USB_ISTR_DIR_Msk (0x1U << USB_ISTR_DIR_Pos) /*!< 0x00000010 */
-#define USB_ISTR_DIR USB_ISTR_DIR_Msk /*!< Direction of transaction */
-#define USB_ISTR_ESOF_Pos (8U)
-#define USB_ISTR_ESOF_Msk (0x1U << USB_ISTR_ESOF_Pos) /*!< 0x00000100 */
-#define USB_ISTR_ESOF USB_ISTR_ESOF_Msk /*!< Expected Start Of Frame */
-#define USB_ISTR_SOF_Pos (9U)
-#define USB_ISTR_SOF_Msk (0x1U << USB_ISTR_SOF_Pos) /*!< 0x00000200 */
-#define USB_ISTR_SOF USB_ISTR_SOF_Msk /*!< Start Of Frame */
-#define USB_ISTR_RESET_Pos (10U)
-#define USB_ISTR_RESET_Msk (0x1U << USB_ISTR_RESET_Pos) /*!< 0x00000400 */
-#define USB_ISTR_RESET USB_ISTR_RESET_Msk /*!< USB RESET request */
-#define USB_ISTR_SUSP_Pos (11U)
-#define USB_ISTR_SUSP_Msk (0x1U << USB_ISTR_SUSP_Pos) /*!< 0x00000800 */
-#define USB_ISTR_SUSP USB_ISTR_SUSP_Msk /*!< Suspend mode request */
-#define USB_ISTR_WKUP_Pos (12U)
-#define USB_ISTR_WKUP_Msk (0x1U << USB_ISTR_WKUP_Pos) /*!< 0x00001000 */
-#define USB_ISTR_WKUP USB_ISTR_WKUP_Msk /*!< Wake up */
-#define USB_ISTR_ERR_Pos (13U)
-#define USB_ISTR_ERR_Msk (0x1U << USB_ISTR_ERR_Pos) /*!< 0x00002000 */
-#define USB_ISTR_ERR USB_ISTR_ERR_Msk /*!< Error */
-#define USB_ISTR_PMAOVR_Pos (14U)
-#define USB_ISTR_PMAOVR_Msk (0x1U << USB_ISTR_PMAOVR_Pos) /*!< 0x00004000 */
-#define USB_ISTR_PMAOVR USB_ISTR_PMAOVR_Msk /*!< Packet Memory Area Over / Underrun */
-#define USB_ISTR_CTR_Pos (15U)
-#define USB_ISTR_CTR_Msk (0x1U << USB_ISTR_CTR_Pos) /*!< 0x00008000 */
-#define USB_ISTR_CTR USB_ISTR_CTR_Msk /*!< Correct Transfer */
-
-/******************* Bit definition for USB_FNR register ********************/
-#define USB_FNR_FN_Pos (0U)
-#define USB_FNR_FN_Msk (0x7FFU << USB_FNR_FN_Pos) /*!< 0x000007FF */
-#define USB_FNR_FN USB_FNR_FN_Msk /*!< Frame Number */
-#define USB_FNR_LSOF_Pos (11U)
-#define USB_FNR_LSOF_Msk (0x3U << USB_FNR_LSOF_Pos) /*!< 0x00001800 */
-#define USB_FNR_LSOF USB_FNR_LSOF_Msk /*!< Lost SOF */
-#define USB_FNR_LCK_Pos (13U)
-#define USB_FNR_LCK_Msk (0x1U << USB_FNR_LCK_Pos) /*!< 0x00002000 */
-#define USB_FNR_LCK USB_FNR_LCK_Msk /*!< Locked */
-#define USB_FNR_RXDM_Pos (14U)
-#define USB_FNR_RXDM_Msk (0x1U << USB_FNR_RXDM_Pos) /*!< 0x00004000 */
-#define USB_FNR_RXDM USB_FNR_RXDM_Msk /*!< Receive Data - Line Status */
-#define USB_FNR_RXDP_Pos (15U)
-#define USB_FNR_RXDP_Msk (0x1U << USB_FNR_RXDP_Pos) /*!< 0x00008000 */
-#define USB_FNR_RXDP USB_FNR_RXDP_Msk /*!< Receive Data + Line Status */
-
-/****************** Bit definition for USB_DADDR register *******************/
-#define USB_DADDR_ADD_Pos (0U)
-#define USB_DADDR_ADD_Msk (0x7FU << USB_DADDR_ADD_Pos) /*!< 0x0000007F */
-#define USB_DADDR_ADD USB_DADDR_ADD_Msk /*!< ADD[6:0] bits (Device Address) */
-#define USB_DADDR_ADD0_Pos (0U)
-#define USB_DADDR_ADD0_Msk (0x1U << USB_DADDR_ADD0_Pos) /*!< 0x00000001 */
-#define USB_DADDR_ADD0 USB_DADDR_ADD0_Msk /*!< Bit 0 */
-#define USB_DADDR_ADD1_Pos (1U)
-#define USB_DADDR_ADD1_Msk (0x1U << USB_DADDR_ADD1_Pos) /*!< 0x00000002 */
-#define USB_DADDR_ADD1 USB_DADDR_ADD1_Msk /*!< Bit 1 */
-#define USB_DADDR_ADD2_Pos (2U)
-#define USB_DADDR_ADD2_Msk (0x1U << USB_DADDR_ADD2_Pos) /*!< 0x00000004 */
-#define USB_DADDR_ADD2 USB_DADDR_ADD2_Msk /*!< Bit 2 */
-#define USB_DADDR_ADD3_Pos (3U)
-#define USB_DADDR_ADD3_Msk (0x1U << USB_DADDR_ADD3_Pos) /*!< 0x00000008 */
-#define USB_DADDR_ADD3 USB_DADDR_ADD3_Msk /*!< Bit 3 */
-#define USB_DADDR_ADD4_Pos (4U)
-#define USB_DADDR_ADD4_Msk (0x1U << USB_DADDR_ADD4_Pos) /*!< 0x00000010 */
-#define USB_DADDR_ADD4 USB_DADDR_ADD4_Msk /*!< Bit 4 */
-#define USB_DADDR_ADD5_Pos (5U)
-#define USB_DADDR_ADD5_Msk (0x1U << USB_DADDR_ADD5_Pos) /*!< 0x00000020 */
-#define USB_DADDR_ADD5 USB_DADDR_ADD5_Msk /*!< Bit 5 */
-#define USB_DADDR_ADD6_Pos (6U)
-#define USB_DADDR_ADD6_Msk (0x1U << USB_DADDR_ADD6_Pos) /*!< 0x00000040 */
-#define USB_DADDR_ADD6 USB_DADDR_ADD6_Msk /*!< Bit 6 */
-
-#define USB_DADDR_EF_Pos (7U)
-#define USB_DADDR_EF_Msk (0x1U << USB_DADDR_EF_Pos) /*!< 0x00000080 */
-#define USB_DADDR_EF USB_DADDR_EF_Msk /*!< Enable Function */
-
-/****************** Bit definition for USB_BTABLE register ******************/
-#define USB_BTABLE_BTABLE_Pos (3U)
-#define USB_BTABLE_BTABLE_Msk (0x1FFFU << USB_BTABLE_BTABLE_Pos) /*!< 0x0000FFF8 */
-#define USB_BTABLE_BTABLE USB_BTABLE_BTABLE_Msk /*!< Buffer Table */
-
-/*!< Buffer descriptor table */
-/***************** Bit definition for USB_ADDR0_TX register *****************/
-#define USB_ADDR0_TX_ADDR0_TX_Pos (1U)
-#define USB_ADDR0_TX_ADDR0_TX_Msk (0x7FFFU << USB_ADDR0_TX_ADDR0_TX_Pos) /*!< 0x0000FFFE */
-#define USB_ADDR0_TX_ADDR0_TX USB_ADDR0_TX_ADDR0_TX_Msk /*!< Transmission Buffer Address 0 */
-
-/***************** Bit definition for USB_ADDR1_TX register *****************/
-#define USB_ADDR1_TX_ADDR1_TX_Pos (1U)
-#define USB_ADDR1_TX_ADDR1_TX_Msk (0x7FFFU << USB_ADDR1_TX_ADDR1_TX_Pos) /*!< 0x0000FFFE */
-#define USB_ADDR1_TX_ADDR1_TX USB_ADDR1_TX_ADDR1_TX_Msk /*!< Transmission Buffer Address 1 */
-
-/***************** Bit definition for USB_ADDR2_TX register *****************/
-#define USB_ADDR2_TX_ADDR2_TX_Pos (1U)
-#define USB_ADDR2_TX_ADDR2_TX_Msk (0x7FFFU << USB_ADDR2_TX_ADDR2_TX_Pos) /*!< 0x0000FFFE */
-#define USB_ADDR2_TX_ADDR2_TX USB_ADDR2_TX_ADDR2_TX_Msk /*!< Transmission Buffer Address 2 */
-
-/***************** Bit definition for USB_ADDR3_TX register *****************/
-#define USB_ADDR3_TX_ADDR3_TX_Pos (1U)
-#define USB_ADDR3_TX_ADDR3_TX_Msk (0x7FFFU << USB_ADDR3_TX_ADDR3_TX_Pos) /*!< 0x0000FFFE */
-#define USB_ADDR3_TX_ADDR3_TX USB_ADDR3_TX_ADDR3_TX_Msk /*!< Transmission Buffer Address 3 */
-
-/***************** Bit definition for USB_ADDR4_TX register *****************/
-#define USB_ADDR4_TX_ADDR4_TX_Pos (1U)
-#define USB_ADDR4_TX_ADDR4_TX_Msk (0x7FFFU << USB_ADDR4_TX_ADDR4_TX_Pos) /*!< 0x0000FFFE */
-#define USB_ADDR4_TX_ADDR4_TX USB_ADDR4_TX_ADDR4_TX_Msk /*!< Transmission Buffer Address 4 */
-
-/***************** Bit definition for USB_ADDR5_TX register *****************/
-#define USB_ADDR5_TX_ADDR5_TX_Pos (1U)
-#define USB_ADDR5_TX_ADDR5_TX_Msk (0x7FFFU << USB_ADDR5_TX_ADDR5_TX_Pos) /*!< 0x0000FFFE */
-#define USB_ADDR5_TX_ADDR5_TX USB_ADDR5_TX_ADDR5_TX_Msk /*!< Transmission Buffer Address 5 */
-
-/***************** Bit definition for USB_ADDR6_TX register *****************/
-#define USB_ADDR6_TX_ADDR6_TX_Pos (1U)
-#define USB_ADDR6_TX_ADDR6_TX_Msk (0x7FFFU << USB_ADDR6_TX_ADDR6_TX_Pos) /*!< 0x0000FFFE */
-#define USB_ADDR6_TX_ADDR6_TX USB_ADDR6_TX_ADDR6_TX_Msk /*!< Transmission Buffer Address 6 */
-
-/***************** Bit definition for USB_ADDR7_TX register *****************/
-#define USB_ADDR7_TX_ADDR7_TX_Pos (1U)
-#define USB_ADDR7_TX_ADDR7_TX_Msk (0x7FFFU << USB_ADDR7_TX_ADDR7_TX_Pos) /*!< 0x0000FFFE */
-#define USB_ADDR7_TX_ADDR7_TX USB_ADDR7_TX_ADDR7_TX_Msk /*!< Transmission Buffer Address 7 */
-
-/*----------------------------------------------------------------------------*/
-
-/***************** Bit definition for USB_COUNT0_TX register ****************/
-#define USB_COUNT0_TX_COUNT0_TX_Pos (0U)
-#define USB_COUNT0_TX_COUNT0_TX_Msk (0x3FFU << USB_COUNT0_TX_COUNT0_TX_Pos) /*!< 0x000003FF */
-#define USB_COUNT0_TX_COUNT0_TX USB_COUNT0_TX_COUNT0_TX_Msk /*!< Transmission Byte Count 0 */
-
-/***************** Bit definition for USB_COUNT1_TX register ****************/
-#define USB_COUNT1_TX_COUNT1_TX_Pos (0U)
-#define USB_COUNT1_TX_COUNT1_TX_Msk (0x3FFU << USB_COUNT1_TX_COUNT1_TX_Pos) /*!< 0x000003FF */
-#define USB_COUNT1_TX_COUNT1_TX USB_COUNT1_TX_COUNT1_TX_Msk /*!< Transmission Byte Count 1 */
-
-/***************** Bit definition for USB_COUNT2_TX register ****************/
-#define USB_COUNT2_TX_COUNT2_TX_Pos (0U)
-#define USB_COUNT2_TX_COUNT2_TX_Msk (0x3FFU << USB_COUNT2_TX_COUNT2_TX_Pos) /*!< 0x000003FF */
-#define USB_COUNT2_TX_COUNT2_TX USB_COUNT2_TX_COUNT2_TX_Msk /*!< Transmission Byte Count 2 */
-
-/***************** Bit definition for USB_COUNT3_TX register ****************/
-#define USB_COUNT3_TX_COUNT3_TX_Pos (0U)
-#define USB_COUNT3_TX_COUNT3_TX_Msk (0x3FFU << USB_COUNT3_TX_COUNT3_TX_Pos) /*!< 0x000003FF */
-#define USB_COUNT3_TX_COUNT3_TX USB_COUNT3_TX_COUNT3_TX_Msk /*!< Transmission Byte Count 3 */
-
-/***************** Bit definition for USB_COUNT4_TX register ****************/
-#define USB_COUNT4_TX_COUNT4_TX_Pos (0U)
-#define USB_COUNT4_TX_COUNT4_TX_Msk (0x3FFU << USB_COUNT4_TX_COUNT4_TX_Pos) /*!< 0x000003FF */
-#define USB_COUNT4_TX_COUNT4_TX USB_COUNT4_TX_COUNT4_TX_Msk /*!< Transmission Byte Count 4 */
-
-/***************** Bit definition for USB_COUNT5_TX register ****************/
-#define USB_COUNT5_TX_COUNT5_TX_Pos (0U)
-#define USB_COUNT5_TX_COUNT5_TX_Msk (0x3FFU << USB_COUNT5_TX_COUNT5_TX_Pos) /*!< 0x000003FF */
-#define USB_COUNT5_TX_COUNT5_TX USB_COUNT5_TX_COUNT5_TX_Msk /*!< Transmission Byte Count 5 */
-
-/***************** Bit definition for USB_COUNT6_TX register ****************/
-#define USB_COUNT6_TX_COUNT6_TX_Pos (0U)
-#define USB_COUNT6_TX_COUNT6_TX_Msk (0x3FFU << USB_COUNT6_TX_COUNT6_TX_Pos) /*!< 0x000003FF */
-#define USB_COUNT6_TX_COUNT6_TX USB_COUNT6_TX_COUNT6_TX_Msk /*!< Transmission Byte Count 6 */
-
-/***************** Bit definition for USB_COUNT7_TX register ****************/
-#define USB_COUNT7_TX_COUNT7_TX_Pos (0U)
-#define USB_COUNT7_TX_COUNT7_TX_Msk (0x3FFU << USB_COUNT7_TX_COUNT7_TX_Pos) /*!< 0x000003FF */
-#define USB_COUNT7_TX_COUNT7_TX USB_COUNT7_TX_COUNT7_TX_Msk /*!< Transmission Byte Count 7 */
-
-/*----------------------------------------------------------------------------*/
-
-/**************** Bit definition for USB_COUNT0_TX_0 register ***************/
-#define USB_COUNT0_TX_0_COUNT0_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 0 (low) */
-
-/**************** Bit definition for USB_COUNT0_TX_1 register ***************/
-#define USB_COUNT0_TX_1_COUNT0_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 0 (high) */
-
-/**************** Bit definition for USB_COUNT1_TX_0 register ***************/
-#define USB_COUNT1_TX_0_COUNT1_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 1 (low) */
-
-/**************** Bit definition for USB_COUNT1_TX_1 register ***************/
-#define USB_COUNT1_TX_1_COUNT1_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 1 (high) */
-
-/**************** Bit definition for USB_COUNT2_TX_0 register ***************/
-#define USB_COUNT2_TX_0_COUNT2_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 2 (low) */
-
-/**************** Bit definition for USB_COUNT2_TX_1 register ***************/
-#define USB_COUNT2_TX_1_COUNT2_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 2 (high) */
-
-/**************** Bit definition for USB_COUNT3_TX_0 register ***************/
-#define USB_COUNT3_TX_0_COUNT3_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 3 (low) */
-
-/**************** Bit definition for USB_COUNT3_TX_1 register ***************/
-#define USB_COUNT3_TX_1_COUNT3_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 3 (high) */
-
-/**************** Bit definition for USB_COUNT4_TX_0 register ***************/
-#define USB_COUNT4_TX_0_COUNT4_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 4 (low) */
-
-/**************** Bit definition for USB_COUNT4_TX_1 register ***************/
-#define USB_COUNT4_TX_1_COUNT4_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 4 (high) */
-
-/**************** Bit definition for USB_COUNT5_TX_0 register ***************/
-#define USB_COUNT5_TX_0_COUNT5_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 5 (low) */
-
-/**************** Bit definition for USB_COUNT5_TX_1 register ***************/
-#define USB_COUNT5_TX_1_COUNT5_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 5 (high) */
-
-/**************** Bit definition for USB_COUNT6_TX_0 register ***************/
-#define USB_COUNT6_TX_0_COUNT6_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 6 (low) */
-
-/**************** Bit definition for USB_COUNT6_TX_1 register ***************/
-#define USB_COUNT6_TX_1_COUNT6_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 6 (high) */
-
-/**************** Bit definition for USB_COUNT7_TX_0 register ***************/
-#define USB_COUNT7_TX_0_COUNT7_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 7 (low) */
-
-/**************** Bit definition for USB_COUNT7_TX_1 register ***************/
-#define USB_COUNT7_TX_1_COUNT7_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 7 (high) */
-
-/*----------------------------------------------------------------------------*/
-
-/***************** Bit definition for USB_ADDR0_RX register *****************/
-#define USB_ADDR0_RX_ADDR0_RX_Pos (1U)
-#define USB_ADDR0_RX_ADDR0_RX_Msk (0x7FFFU << USB_ADDR0_RX_ADDR0_RX_Pos) /*!< 0x0000FFFE */
-#define USB_ADDR0_RX_ADDR0_RX USB_ADDR0_RX_ADDR0_RX_Msk /*!< Reception Buffer Address 0 */
-
-/***************** Bit definition for USB_ADDR1_RX register *****************/
-#define USB_ADDR1_RX_ADDR1_RX_Pos (1U)
-#define USB_ADDR1_RX_ADDR1_RX_Msk (0x7FFFU << USB_ADDR1_RX_ADDR1_RX_Pos) /*!< 0x0000FFFE */
-#define USB_ADDR1_RX_ADDR1_RX USB_ADDR1_RX_ADDR1_RX_Msk /*!< Reception Buffer Address 1 */
-
-/***************** Bit definition for USB_ADDR2_RX register *****************/
-#define USB_ADDR2_RX_ADDR2_RX_Pos (1U)
-#define USB_ADDR2_RX_ADDR2_RX_Msk (0x7FFFU << USB_ADDR2_RX_ADDR2_RX_Pos) /*!< 0x0000FFFE */
-#define USB_ADDR2_RX_ADDR2_RX USB_ADDR2_RX_ADDR2_RX_Msk /*!< Reception Buffer Address 2 */
-
-/***************** Bit definition for USB_ADDR3_RX register *****************/
-#define USB_ADDR3_RX_ADDR3_RX_Pos (1U)
-#define USB_ADDR3_RX_ADDR3_RX_Msk (0x7FFFU << USB_ADDR3_RX_ADDR3_RX_Pos) /*!< 0x0000FFFE */
-#define USB_ADDR3_RX_ADDR3_RX USB_ADDR3_RX_ADDR3_RX_Msk /*!< Reception Buffer Address 3 */
-
-/***************** Bit definition for USB_ADDR4_RX register *****************/
-#define USB_ADDR4_RX_ADDR4_RX_Pos (1U)
-#define USB_ADDR4_RX_ADDR4_RX_Msk (0x7FFFU << USB_ADDR4_RX_ADDR4_RX_Pos) /*!< 0x0000FFFE */
-#define USB_ADDR4_RX_ADDR4_RX USB_ADDR4_RX_ADDR4_RX_Msk /*!< Reception Buffer Address 4 */
-
-/***************** Bit definition for USB_ADDR5_RX register *****************/
-#define USB_ADDR5_RX_ADDR5_RX_Pos (1U)
-#define USB_ADDR5_RX_ADDR5_RX_Msk (0x7FFFU << USB_ADDR5_RX_ADDR5_RX_Pos) /*!< 0x0000FFFE */
-#define USB_ADDR5_RX_ADDR5_RX USB_ADDR5_RX_ADDR5_RX_Msk /*!< Reception Buffer Address 5 */
-
-/***************** Bit definition for USB_ADDR6_RX register *****************/
-#define USB_ADDR6_RX_ADDR6_RX_Pos (1U)
-#define USB_ADDR6_RX_ADDR6_RX_Msk (0x7FFFU << USB_ADDR6_RX_ADDR6_RX_Pos) /*!< 0x0000FFFE */
-#define USB_ADDR6_RX_ADDR6_RX USB_ADDR6_RX_ADDR6_RX_Msk /*!< Reception Buffer Address 6 */
-
-/***************** Bit definition for USB_ADDR7_RX register *****************/
-#define USB_ADDR7_RX_ADDR7_RX_Pos (1U)
-#define USB_ADDR7_RX_ADDR7_RX_Msk (0x7FFFU << USB_ADDR7_RX_ADDR7_RX_Pos) /*!< 0x0000FFFE */
-#define USB_ADDR7_RX_ADDR7_RX USB_ADDR7_RX_ADDR7_RX_Msk /*!< Reception Buffer Address 7 */
-
-/*----------------------------------------------------------------------------*/
-
-/***************** Bit definition for USB_COUNT0_RX register ****************/
-#define USB_COUNT0_RX_COUNT0_RX_Pos (0U)
-#define USB_COUNT0_RX_COUNT0_RX_Msk (0x3FFU << USB_COUNT0_RX_COUNT0_RX_Pos) /*!< 0x000003FF */
-#define USB_COUNT0_RX_COUNT0_RX USB_COUNT0_RX_COUNT0_RX_Msk /*!< Reception Byte Count */
-
-#define USB_COUNT0_RX_NUM_BLOCK_Pos (10U)
-#define USB_COUNT0_RX_NUM_BLOCK_Msk (0x1FU << USB_COUNT0_RX_NUM_BLOCK_Pos) /*!< 0x00007C00 */
-#define USB_COUNT0_RX_NUM_BLOCK USB_COUNT0_RX_NUM_BLOCK_Msk /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
-#define USB_COUNT0_RX_NUM_BLOCK_0 (0x01U << USB_COUNT0_RX_NUM_BLOCK_Pos) /*!< 0x00000400 */
-#define USB_COUNT0_RX_NUM_BLOCK_1 (0x02U << USB_COUNT0_RX_NUM_BLOCK_Pos) /*!< 0x00000800 */
-#define USB_COUNT0_RX_NUM_BLOCK_2 (0x04U << USB_COUNT0_RX_NUM_BLOCK_Pos) /*!< 0x00001000 */
-#define USB_COUNT0_RX_NUM_BLOCK_3 (0x08U << USB_COUNT0_RX_NUM_BLOCK_Pos) /*!< 0x00002000 */
-#define USB_COUNT0_RX_NUM_BLOCK_4 (0x10U << USB_COUNT0_RX_NUM_BLOCK_Pos) /*!< 0x00004000 */
-
-#define USB_COUNT0_RX_BLSIZE_Pos (15U)
-#define USB_COUNT0_RX_BLSIZE_Msk (0x1U << USB_COUNT0_RX_BLSIZE_Pos) /*!< 0x00008000 */
-#define USB_COUNT0_RX_BLSIZE USB_COUNT0_RX_BLSIZE_Msk /*!< BLock SIZE */
-
-/***************** Bit definition for USB_COUNT1_RX register ****************/
-#define USB_COUNT1_RX_COUNT1_RX_Pos (0U)
-#define USB_COUNT1_RX_COUNT1_RX_Msk (0x3FFU << USB_COUNT1_RX_COUNT1_RX_Pos) /*!< 0x000003FF */
-#define USB_COUNT1_RX_COUNT1_RX USB_COUNT1_RX_COUNT1_RX_Msk /*!< Reception Byte Count */
-
-#define USB_COUNT1_RX_NUM_BLOCK_Pos (10U)
-#define USB_COUNT1_RX_NUM_BLOCK_Msk (0x1FU << USB_COUNT1_RX_NUM_BLOCK_Pos) /*!< 0x00007C00 */
-#define USB_COUNT1_RX_NUM_BLOCK USB_COUNT1_RX_NUM_BLOCK_Msk /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
-#define USB_COUNT1_RX_NUM_BLOCK_0 (0x01U << USB_COUNT1_RX_NUM_BLOCK_Pos) /*!< 0x00000400 */
-#define USB_COUNT1_RX_NUM_BLOCK_1 (0x02U << USB_COUNT1_RX_NUM_BLOCK_Pos) /*!< 0x00000800 */
-#define USB_COUNT1_RX_NUM_BLOCK_2 (0x04U << USB_COUNT1_RX_NUM_BLOCK_Pos) /*!< 0x00001000 */
-#define USB_COUNT1_RX_NUM_BLOCK_3 (0x08U << USB_COUNT1_RX_NUM_BLOCK_Pos) /*!< 0x00002000 */
-#define USB_COUNT1_RX_NUM_BLOCK_4 (0x10U << USB_COUNT1_RX_NUM_BLOCK_Pos) /*!< 0x00004000 */
-
-#define USB_COUNT1_RX_BLSIZE_Pos (15U)
-#define USB_COUNT1_RX_BLSIZE_Msk (0x1U << USB_COUNT1_RX_BLSIZE_Pos) /*!< 0x00008000 */
-#define USB_COUNT1_RX_BLSIZE USB_COUNT1_RX_BLSIZE_Msk /*!< BLock SIZE */
-
-/***************** Bit definition for USB_COUNT2_RX register ****************/
-#define USB_COUNT2_RX_COUNT2_RX_Pos (0U)
-#define USB_COUNT2_RX_COUNT2_RX_Msk (0x3FFU << USB_COUNT2_RX_COUNT2_RX_Pos) /*!< 0x000003FF */
-#define USB_COUNT2_RX_COUNT2_RX USB_COUNT2_RX_COUNT2_RX_Msk /*!< Reception Byte Count */
-
-#define USB_COUNT2_RX_NUM_BLOCK_Pos (10U)
-#define USB_COUNT2_RX_NUM_BLOCK_Msk (0x1FU << USB_COUNT2_RX_NUM_BLOCK_Pos) /*!< 0x00007C00 */
-#define USB_COUNT2_RX_NUM_BLOCK USB_COUNT2_RX_NUM_BLOCK_Msk /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
-#define USB_COUNT2_RX_NUM_BLOCK_0 (0x01U << USB_COUNT2_RX_NUM_BLOCK_Pos) /*!< 0x00000400 */
-#define USB_COUNT2_RX_NUM_BLOCK_1 (0x02U << USB_COUNT2_RX_NUM_BLOCK_Pos) /*!< 0x00000800 */
-#define USB_COUNT2_RX_NUM_BLOCK_2 (0x04U << USB_COUNT2_RX_NUM_BLOCK_Pos) /*!< 0x00001000 */
-#define USB_COUNT2_RX_NUM_BLOCK_3 (0x08U << USB_COUNT2_RX_NUM_BLOCK_Pos) /*!< 0x00002000 */
-#define USB_COUNT2_RX_NUM_BLOCK_4 (0x10U << USB_COUNT2_RX_NUM_BLOCK_Pos) /*!< 0x00004000 */
-
-#define USB_COUNT2_RX_BLSIZE_Pos (15U)
-#define USB_COUNT2_RX_BLSIZE_Msk (0x1U << USB_COUNT2_RX_BLSIZE_Pos) /*!< 0x00008000 */
-#define USB_COUNT2_RX_BLSIZE USB_COUNT2_RX_BLSIZE_Msk /*!< BLock SIZE */
-
-/***************** Bit definition for USB_COUNT3_RX register ****************/
-#define USB_COUNT3_RX_COUNT3_RX_Pos (0U)
-#define USB_COUNT3_RX_COUNT3_RX_Msk (0x3FFU << USB_COUNT3_RX_COUNT3_RX_Pos) /*!< 0x000003FF */
-#define USB_COUNT3_RX_COUNT3_RX USB_COUNT3_RX_COUNT3_RX_Msk /*!< Reception Byte Count */
-
-#define USB_COUNT3_RX_NUM_BLOCK_Pos (10U)
-#define USB_COUNT3_RX_NUM_BLOCK_Msk (0x1FU << USB_COUNT3_RX_NUM_BLOCK_Pos) /*!< 0x00007C00 */
-#define USB_COUNT3_RX_NUM_BLOCK USB_COUNT3_RX_NUM_BLOCK_Msk /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
-#define USB_COUNT3_RX_NUM_BLOCK_0 (0x01U << USB_COUNT3_RX_NUM_BLOCK_Pos) /*!< 0x00000400 */
-#define USB_COUNT3_RX_NUM_BLOCK_1 (0x02U << USB_COUNT3_RX_NUM_BLOCK_Pos) /*!< 0x00000800 */
-#define USB_COUNT3_RX_NUM_BLOCK_2 (0x04U << USB_COUNT3_RX_NUM_BLOCK_Pos) /*!< 0x00001000 */
-#define USB_COUNT3_RX_NUM_BLOCK_3 (0x08U << USB_COUNT3_RX_NUM_BLOCK_Pos) /*!< 0x00002000 */
-#define USB_COUNT3_RX_NUM_BLOCK_4 (0x10U << USB_COUNT3_RX_NUM_BLOCK_Pos) /*!< 0x00004000 */
-
-#define USB_COUNT3_RX_BLSIZE_Pos (15U)
-#define USB_COUNT3_RX_BLSIZE_Msk (0x1U << USB_COUNT3_RX_BLSIZE_Pos) /*!< 0x00008000 */
-#define USB_COUNT3_RX_BLSIZE USB_COUNT3_RX_BLSIZE_Msk /*!< BLock SIZE */
-
-/***************** Bit definition for USB_COUNT4_RX register ****************/
-#define USB_COUNT4_RX_COUNT4_RX_Pos (0U)
-#define USB_COUNT4_RX_COUNT4_RX_Msk (0x3FFU << USB_COUNT4_RX_COUNT4_RX_Pos) /*!< 0x000003FF */
-#define USB_COUNT4_RX_COUNT4_RX USB_COUNT4_RX_COUNT4_RX_Msk /*!< Reception Byte Count */
-
-#define USB_COUNT4_RX_NUM_BLOCK_Pos (10U)
-#define USB_COUNT4_RX_NUM_BLOCK_Msk (0x1FU << USB_COUNT4_RX_NUM_BLOCK_Pos) /*!< 0x00007C00 */
-#define USB_COUNT4_RX_NUM_BLOCK USB_COUNT4_RX_NUM_BLOCK_Msk /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
-#define USB_COUNT4_RX_NUM_BLOCK_0 (0x01U << USB_COUNT4_RX_NUM_BLOCK_Pos) /*!< 0x00000400 */
-#define USB_COUNT4_RX_NUM_BLOCK_1 (0x02U << USB_COUNT4_RX_NUM_BLOCK_Pos) /*!< 0x00000800 */
-#define USB_COUNT4_RX_NUM_BLOCK_2 (0x04U << USB_COUNT4_RX_NUM_BLOCK_Pos) /*!< 0x00001000 */
-#define USB_COUNT4_RX_NUM_BLOCK_3 (0x08U << USB_COUNT4_RX_NUM_BLOCK_Pos) /*!< 0x00002000 */
-#define USB_COUNT4_RX_NUM_BLOCK_4 (0x10U << USB_COUNT4_RX_NUM_BLOCK_Pos) /*!< 0x00004000 */
-
-#define USB_COUNT4_RX_BLSIZE_Pos (15U)
-#define USB_COUNT4_RX_BLSIZE_Msk (0x1U << USB_COUNT4_RX_BLSIZE_Pos) /*!< 0x00008000 */
-#define USB_COUNT4_RX_BLSIZE USB_COUNT4_RX_BLSIZE_Msk /*!< BLock SIZE */
-
-/***************** Bit definition for USB_COUNT5_RX register ****************/
-#define USB_COUNT5_RX_COUNT5_RX_Pos (0U)
-#define USB_COUNT5_RX_COUNT5_RX_Msk (0x3FFU << USB_COUNT5_RX_COUNT5_RX_Pos) /*!< 0x000003FF */
-#define USB_COUNT5_RX_COUNT5_RX USB_COUNT5_RX_COUNT5_RX_Msk /*!< Reception Byte Count */
-
-#define USB_COUNT5_RX_NUM_BLOCK_Pos (10U)
-#define USB_COUNT5_RX_NUM_BLOCK_Msk (0x1FU << USB_COUNT5_RX_NUM_BLOCK_Pos) /*!< 0x00007C00 */
-#define USB_COUNT5_RX_NUM_BLOCK USB_COUNT5_RX_NUM_BLOCK_Msk /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
-#define USB_COUNT5_RX_NUM_BLOCK_0 (0x01U << USB_COUNT5_RX_NUM_BLOCK_Pos) /*!< 0x00000400 */
-#define USB_COUNT5_RX_NUM_BLOCK_1 (0x02U << USB_COUNT5_RX_NUM_BLOCK_Pos) /*!< 0x00000800 */
-#define USB_COUNT5_RX_NUM_BLOCK_2 (0x04U << USB_COUNT5_RX_NUM_BLOCK_Pos) /*!< 0x00001000 */
-#define USB_COUNT5_RX_NUM_BLOCK_3 (0x08U << USB_COUNT5_RX_NUM_BLOCK_Pos) /*!< 0x00002000 */
-#define USB_COUNT5_RX_NUM_BLOCK_4 (0x10U << USB_COUNT5_RX_NUM_BLOCK_Pos) /*!< 0x00004000 */
-
-#define USB_COUNT5_RX_BLSIZE_Pos (15U)
-#define USB_COUNT5_RX_BLSIZE_Msk (0x1U << USB_COUNT5_RX_BLSIZE_Pos) /*!< 0x00008000 */
-#define USB_COUNT5_RX_BLSIZE USB_COUNT5_RX_BLSIZE_Msk /*!< BLock SIZE */
-
-/***************** Bit definition for USB_COUNT6_RX register ****************/
-#define USB_COUNT6_RX_COUNT6_RX_Pos (0U)
-#define USB_COUNT6_RX_COUNT6_RX_Msk (0x3FFU << USB_COUNT6_RX_COUNT6_RX_Pos) /*!< 0x000003FF */
-#define USB_COUNT6_RX_COUNT6_RX USB_COUNT6_RX_COUNT6_RX_Msk /*!< Reception Byte Count */
-
-#define USB_COUNT6_RX_NUM_BLOCK_Pos (10U)
-#define USB_COUNT6_RX_NUM_BLOCK_Msk (0x1FU << USB_COUNT6_RX_NUM_BLOCK_Pos) /*!< 0x00007C00 */
-#define USB_COUNT6_RX_NUM_BLOCK USB_COUNT6_RX_NUM_BLOCK_Msk /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
-#define USB_COUNT6_RX_NUM_BLOCK_0 (0x01U << USB_COUNT6_RX_NUM_BLOCK_Pos) /*!< 0x00000400 */
-#define USB_COUNT6_RX_NUM_BLOCK_1 (0x02U << USB_COUNT6_RX_NUM_BLOCK_Pos) /*!< 0x00000800 */
-#define USB_COUNT6_RX_NUM_BLOCK_2 (0x04U << USB_COUNT6_RX_NUM_BLOCK_Pos) /*!< 0x00001000 */
-#define USB_COUNT6_RX_NUM_BLOCK_3 (0x08U << USB_COUNT6_RX_NUM_BLOCK_Pos) /*!< 0x00002000 */
-#define USB_COUNT6_RX_NUM_BLOCK_4 (0x10U << USB_COUNT6_RX_NUM_BLOCK_Pos) /*!< 0x00004000 */
-
-#define USB_COUNT6_RX_BLSIZE_Pos (15U)
-#define USB_COUNT6_RX_BLSIZE_Msk (0x1U << USB_COUNT6_RX_BLSIZE_Pos) /*!< 0x00008000 */
-#define USB_COUNT6_RX_BLSIZE USB_COUNT6_RX_BLSIZE_Msk /*!< BLock SIZE */
-
-/***************** Bit definition for USB_COUNT7_RX register ****************/
-#define USB_COUNT7_RX_COUNT7_RX_Pos (0U)
-#define USB_COUNT7_RX_COUNT7_RX_Msk (0x3FFU << USB_COUNT7_RX_COUNT7_RX_Pos) /*!< 0x000003FF */
-#define USB_COUNT7_RX_COUNT7_RX USB_COUNT7_RX_COUNT7_RX_Msk /*!< Reception Byte Count */
-
-#define USB_COUNT7_RX_NUM_BLOCK_Pos (10U)
-#define USB_COUNT7_RX_NUM_BLOCK_Msk (0x1FU << USB_COUNT7_RX_NUM_BLOCK_Pos) /*!< 0x00007C00 */
-#define USB_COUNT7_RX_NUM_BLOCK USB_COUNT7_RX_NUM_BLOCK_Msk /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
-#define USB_COUNT7_RX_NUM_BLOCK_0 (0x01U << USB_COUNT7_RX_NUM_BLOCK_Pos) /*!< 0x00000400 */
-#define USB_COUNT7_RX_NUM_BLOCK_1 (0x02U << USB_COUNT7_RX_NUM_BLOCK_Pos) /*!< 0x00000800 */
-#define USB_COUNT7_RX_NUM_BLOCK_2 (0x04U << USB_COUNT7_RX_NUM_BLOCK_Pos) /*!< 0x00001000 */
-#define USB_COUNT7_RX_NUM_BLOCK_3 (0x08U << USB_COUNT7_RX_NUM_BLOCK_Pos) /*!< 0x00002000 */
-#define USB_COUNT7_RX_NUM_BLOCK_4 (0x10U << USB_COUNT7_RX_NUM_BLOCK_Pos) /*!< 0x00004000 */
-
-#define USB_COUNT7_RX_BLSIZE_Pos (15U)
-#define USB_COUNT7_RX_BLSIZE_Msk (0x1U << USB_COUNT7_RX_BLSIZE_Pos) /*!< 0x00008000 */
-#define USB_COUNT7_RX_BLSIZE USB_COUNT7_RX_BLSIZE_Msk /*!< BLock SIZE */
-
-/*----------------------------------------------------------------------------*/
-
-/**************** Bit definition for USB_COUNT0_RX_0 register ***************/
-#define USB_COUNT0_RX_0_COUNT0_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
-
-#define USB_COUNT0_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
-#define USB_COUNT0_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define USB_COUNT0_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define USB_COUNT0_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define USB_COUNT0_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define USB_COUNT0_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define USB_COUNT0_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
-
-/**************** Bit definition for USB_COUNT0_RX_1 register ***************/
-#define USB_COUNT0_RX_1_COUNT0_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
-
-#define USB_COUNT0_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
-#define USB_COUNT0_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 1 */
-#define USB_COUNT0_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
-#define USB_COUNT0_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
-#define USB_COUNT0_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
-#define USB_COUNT0_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
-
-#define USB_COUNT0_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
-
-/**************** Bit definition for USB_COUNT1_RX_0 register ***************/
-#define USB_COUNT1_RX_0_COUNT1_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
-
-#define USB_COUNT1_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
-#define USB_COUNT1_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define USB_COUNT1_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define USB_COUNT1_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define USB_COUNT1_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define USB_COUNT1_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define USB_COUNT1_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
-
-/**************** Bit definition for USB_COUNT1_RX_1 register ***************/
-#define USB_COUNT1_RX_1_COUNT1_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
-
-#define USB_COUNT1_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
-#define USB_COUNT1_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
-#define USB_COUNT1_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
-#define USB_COUNT1_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
-#define USB_COUNT1_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
-#define USB_COUNT1_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
-
-#define USB_COUNT1_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
-
-/**************** Bit definition for USB_COUNT2_RX_0 register ***************/
-#define USB_COUNT2_RX_0_COUNT2_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
-
-#define USB_COUNT2_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
-#define USB_COUNT2_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define USB_COUNT2_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define USB_COUNT2_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define USB_COUNT2_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define USB_COUNT2_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define USB_COUNT2_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
-
-/**************** Bit definition for USB_COUNT2_RX_1 register ***************/
-#define USB_COUNT2_RX_1_COUNT2_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
-
-#define USB_COUNT2_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
-#define USB_COUNT2_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
-#define USB_COUNT2_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
-#define USB_COUNT2_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
-#define USB_COUNT2_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
-#define USB_COUNT2_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
-
-#define USB_COUNT2_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
-
-/**************** Bit definition for USB_COUNT3_RX_0 register ***************/
-#define USB_COUNT3_RX_0_COUNT3_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
-
-#define USB_COUNT3_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
-#define USB_COUNT3_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define USB_COUNT3_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define USB_COUNT3_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define USB_COUNT3_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define USB_COUNT3_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define USB_COUNT3_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
-
-/**************** Bit definition for USB_COUNT3_RX_1 register ***************/
-#define USB_COUNT3_RX_1_COUNT3_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
-
-#define USB_COUNT3_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
-#define USB_COUNT3_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
-#define USB_COUNT3_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
-#define USB_COUNT3_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
-#define USB_COUNT3_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
-#define USB_COUNT3_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
-
-#define USB_COUNT3_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
-
-/**************** Bit definition for USB_COUNT4_RX_0 register ***************/
-#define USB_COUNT4_RX_0_COUNT4_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
-
-#define USB_COUNT4_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
-#define USB_COUNT4_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define USB_COUNT4_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define USB_COUNT4_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define USB_COUNT4_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define USB_COUNT4_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define USB_COUNT4_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
-
-/**************** Bit definition for USB_COUNT4_RX_1 register ***************/
-#define USB_COUNT4_RX_1_COUNT4_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
-
-#define USB_COUNT4_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
-#define USB_COUNT4_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
-#define USB_COUNT4_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
-#define USB_COUNT4_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
-#define USB_COUNT4_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
-#define USB_COUNT4_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
-
-#define USB_COUNT4_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
-
-/**************** Bit definition for USB_COUNT5_RX_0 register ***************/
-#define USB_COUNT5_RX_0_COUNT5_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
-
-#define USB_COUNT5_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
-#define USB_COUNT5_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define USB_COUNT5_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define USB_COUNT5_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define USB_COUNT5_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define USB_COUNT5_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define USB_COUNT5_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
-
-/**************** Bit definition for USB_COUNT5_RX_1 register ***************/
-#define USB_COUNT5_RX_1_COUNT5_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
-
-#define USB_COUNT5_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
-#define USB_COUNT5_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
-#define USB_COUNT5_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
-#define USB_COUNT5_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
-#define USB_COUNT5_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
-#define USB_COUNT5_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
-
-#define USB_COUNT5_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
-
-/*************** Bit definition for USB_COUNT6_RX_0 register ***************/
-#define USB_COUNT6_RX_0_COUNT6_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
-
-#define USB_COUNT6_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
-#define USB_COUNT6_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define USB_COUNT6_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define USB_COUNT6_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define USB_COUNT6_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define USB_COUNT6_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define USB_COUNT6_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
-
-/**************** Bit definition for USB_COUNT6_RX_1 register ***************/
-#define USB_COUNT6_RX_1_COUNT6_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
-
-#define USB_COUNT6_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
-#define USB_COUNT6_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
-#define USB_COUNT6_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
-#define USB_COUNT6_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
-#define USB_COUNT6_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
-#define USB_COUNT6_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
-
-#define USB_COUNT6_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
-
-/*************** Bit definition for USB_COUNT7_RX_0 register ****************/
-#define USB_COUNT7_RX_0_COUNT7_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */
-
-#define USB_COUNT7_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
-#define USB_COUNT7_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */
-#define USB_COUNT7_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */
-#define USB_COUNT7_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */
-#define USB_COUNT7_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */
-#define USB_COUNT7_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-
-#define USB_COUNT7_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */
-
-/*************** Bit definition for USB_COUNT7_RX_1 register ****************/
-#define USB_COUNT7_RX_1_COUNT7_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */
-
-#define USB_COUNT7_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
-#define USB_COUNT7_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */
-#define USB_COUNT7_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */
-#define USB_COUNT7_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */
-#define USB_COUNT7_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */
-#define USB_COUNT7_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */
-
-#define USB_COUNT7_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */
-
-/******************************************************************************/
-/* */
-/* Controller Area Network */
-/* */
-/******************************************************************************/
-
-/*!< CAN control and status registers */
-/******************* Bit definition for CAN_MCR register ********************/
-#define CAN_MCR_INRQ_Pos (0U)
-#define CAN_MCR_INRQ_Msk (0x1U << CAN_MCR_INRQ_Pos) /*!< 0x00000001 */
-#define CAN_MCR_INRQ CAN_MCR_INRQ_Msk /*!< Initialization Request */
-#define CAN_MCR_SLEEP_Pos (1U)
-#define CAN_MCR_SLEEP_Msk (0x1U << CAN_MCR_SLEEP_Pos) /*!< 0x00000002 */
-#define CAN_MCR_SLEEP CAN_MCR_SLEEP_Msk /*!< Sleep Mode Request */
-#define CAN_MCR_TXFP_Pos (2U)
-#define CAN_MCR_TXFP_Msk (0x1U << CAN_MCR_TXFP_Pos) /*!< 0x00000004 */
-#define CAN_MCR_TXFP CAN_MCR_TXFP_Msk /*!< Transmit FIFO Priority */
-#define CAN_MCR_RFLM_Pos (3U)
-#define CAN_MCR_RFLM_Msk (0x1U << CAN_MCR_RFLM_Pos) /*!< 0x00000008 */
-#define CAN_MCR_RFLM CAN_MCR_RFLM_Msk /*!< Receive FIFO Locked Mode */
-#define CAN_MCR_NART_Pos (4U)
-#define CAN_MCR_NART_Msk (0x1U << CAN_MCR_NART_Pos) /*!< 0x00000010 */
-#define CAN_MCR_NART CAN_MCR_NART_Msk /*!< No Automatic Retransmission */
-#define CAN_MCR_AWUM_Pos (5U)
-#define CAN_MCR_AWUM_Msk (0x1U << CAN_MCR_AWUM_Pos) /*!< 0x00000020 */
-#define CAN_MCR_AWUM CAN_MCR_AWUM_Msk /*!< Automatic Wakeup Mode */
-#define CAN_MCR_ABOM_Pos (6U)
-#define CAN_MCR_ABOM_Msk (0x1U << CAN_MCR_ABOM_Pos) /*!< 0x00000040 */
-#define CAN_MCR_ABOM CAN_MCR_ABOM_Msk /*!< Automatic Bus-Off Management */
-#define CAN_MCR_TTCM_Pos (7U)
-#define CAN_MCR_TTCM_Msk (0x1U << CAN_MCR_TTCM_Pos) /*!< 0x00000080 */
-#define CAN_MCR_TTCM CAN_MCR_TTCM_Msk /*!< Time Triggered Communication Mode */
-#define CAN_MCR_RESET_Pos (15U)
-#define CAN_MCR_RESET_Msk (0x1U << CAN_MCR_RESET_Pos) /*!< 0x00008000 */
-#define CAN_MCR_RESET CAN_MCR_RESET_Msk /*!< CAN software master reset */
-#define CAN_MCR_DBF_Pos (16U)
-#define CAN_MCR_DBF_Msk (0x1U << CAN_MCR_DBF_Pos) /*!< 0x00010000 */
-#define CAN_MCR_DBF CAN_MCR_DBF_Msk /*!< CAN Debug freeze */
-
-/******************* Bit definition for CAN_MSR register ********************/
-#define CAN_MSR_INAK_Pos (0U)
-#define CAN_MSR_INAK_Msk (0x1U << CAN_MSR_INAK_Pos) /*!< 0x00000001 */
-#define CAN_MSR_INAK CAN_MSR_INAK_Msk /*!< Initialization Acknowledge */
-#define CAN_MSR_SLAK_Pos (1U)
-#define CAN_MSR_SLAK_Msk (0x1U << CAN_MSR_SLAK_Pos) /*!< 0x00000002 */
-#define CAN_MSR_SLAK CAN_MSR_SLAK_Msk /*!< Sleep Acknowledge */
-#define CAN_MSR_ERRI_Pos (2U)
-#define CAN_MSR_ERRI_Msk (0x1U << CAN_MSR_ERRI_Pos) /*!< 0x00000004 */
-#define CAN_MSR_ERRI CAN_MSR_ERRI_Msk /*!< Error Interrupt */
-#define CAN_MSR_WKUI_Pos (3U)
-#define CAN_MSR_WKUI_Msk (0x1U << CAN_MSR_WKUI_Pos) /*!< 0x00000008 */
-#define CAN_MSR_WKUI CAN_MSR_WKUI_Msk /*!< Wakeup Interrupt */
-#define CAN_MSR_SLAKI_Pos (4U)
-#define CAN_MSR_SLAKI_Msk (0x1U << CAN_MSR_SLAKI_Pos) /*!< 0x00000010 */
-#define CAN_MSR_SLAKI CAN_MSR_SLAKI_Msk /*!< Sleep Acknowledge Interrupt */
-#define CAN_MSR_TXM_Pos (8U)
-#define CAN_MSR_TXM_Msk (0x1U << CAN_MSR_TXM_Pos) /*!< 0x00000100 */
-#define CAN_MSR_TXM CAN_MSR_TXM_Msk /*!< Transmit Mode */
-#define CAN_MSR_RXM_Pos (9U)
-#define CAN_MSR_RXM_Msk (0x1U << CAN_MSR_RXM_Pos) /*!< 0x00000200 */
-#define CAN_MSR_RXM CAN_MSR_RXM_Msk /*!< Receive Mode */
-#define CAN_MSR_SAMP_Pos (10U)
-#define CAN_MSR_SAMP_Msk (0x1U << CAN_MSR_SAMP_Pos) /*!< 0x00000400 */
-#define CAN_MSR_SAMP CAN_MSR_SAMP_Msk /*!< Last Sample Point */
-#define CAN_MSR_RX_Pos (11U)
-#define CAN_MSR_RX_Msk (0x1U << CAN_MSR_RX_Pos) /*!< 0x00000800 */
-#define CAN_MSR_RX CAN_MSR_RX_Msk /*!< CAN Rx Signal */
-
-/******************* Bit definition for CAN_TSR register ********************/
-#define CAN_TSR_RQCP0_Pos (0U)
-#define CAN_TSR_RQCP0_Msk (0x1U << CAN_TSR_RQCP0_Pos) /*!< 0x00000001 */
-#define CAN_TSR_RQCP0 CAN_TSR_RQCP0_Msk /*!< Request Completed Mailbox0 */
-#define CAN_TSR_TXOK0_Pos (1U)
-#define CAN_TSR_TXOK0_Msk (0x1U << CAN_TSR_TXOK0_Pos) /*!< 0x00000002 */
-#define CAN_TSR_TXOK0 CAN_TSR_TXOK0_Msk /*!< Transmission OK of Mailbox0 */
-#define CAN_TSR_ALST0_Pos (2U)
-#define CAN_TSR_ALST0_Msk (0x1U << CAN_TSR_ALST0_Pos) /*!< 0x00000004 */
-#define CAN_TSR_ALST0 CAN_TSR_ALST0_Msk /*!< Arbitration Lost for Mailbox0 */
-#define CAN_TSR_TERR0_Pos (3U)
-#define CAN_TSR_TERR0_Msk (0x1U << CAN_TSR_TERR0_Pos) /*!< 0x00000008 */
-#define CAN_TSR_TERR0 CAN_TSR_TERR0_Msk /*!< Transmission Error of Mailbox0 */
-#define CAN_TSR_ABRQ0_Pos (7U)
-#define CAN_TSR_ABRQ0_Msk (0x1U << CAN_TSR_ABRQ0_Pos) /*!< 0x00000080 */
-#define CAN_TSR_ABRQ0 CAN_TSR_ABRQ0_Msk /*!< Abort Request for Mailbox0 */
-#define CAN_TSR_RQCP1_Pos (8U)
-#define CAN_TSR_RQCP1_Msk (0x1U << CAN_TSR_RQCP1_Pos) /*!< 0x00000100 */
-#define CAN_TSR_RQCP1 CAN_TSR_RQCP1_Msk /*!< Request Completed Mailbox1 */
-#define CAN_TSR_TXOK1_Pos (9U)
-#define CAN_TSR_TXOK1_Msk (0x1U << CAN_TSR_TXOK1_Pos) /*!< 0x00000200 */
-#define CAN_TSR_TXOK1 CAN_TSR_TXOK1_Msk /*!< Transmission OK of Mailbox1 */
-#define CAN_TSR_ALST1_Pos (10U)
-#define CAN_TSR_ALST1_Msk (0x1U << CAN_TSR_ALST1_Pos) /*!< 0x00000400 */
-#define CAN_TSR_ALST1 CAN_TSR_ALST1_Msk /*!< Arbitration Lost for Mailbox1 */
-#define CAN_TSR_TERR1_Pos (11U)
-#define CAN_TSR_TERR1_Msk (0x1U << CAN_TSR_TERR1_Pos) /*!< 0x00000800 */
-#define CAN_TSR_TERR1 CAN_TSR_TERR1_Msk /*!< Transmission Error of Mailbox1 */
-#define CAN_TSR_ABRQ1_Pos (15U)
-#define CAN_TSR_ABRQ1_Msk (0x1U << CAN_TSR_ABRQ1_Pos) /*!< 0x00008000 */
-#define CAN_TSR_ABRQ1 CAN_TSR_ABRQ1_Msk /*!< Abort Request for Mailbox 1 */
-#define CAN_TSR_RQCP2_Pos (16U)
-#define CAN_TSR_RQCP2_Msk (0x1U << CAN_TSR_RQCP2_Pos) /*!< 0x00010000 */
-#define CAN_TSR_RQCP2 CAN_TSR_RQCP2_Msk /*!< Request Completed Mailbox2 */
-#define CAN_TSR_TXOK2_Pos (17U)
-#define CAN_TSR_TXOK2_Msk (0x1U << CAN_TSR_TXOK2_Pos) /*!< 0x00020000 */
-#define CAN_TSR_TXOK2 CAN_TSR_TXOK2_Msk /*!< Transmission OK of Mailbox 2 */
-#define CAN_TSR_ALST2_Pos (18U)
-#define CAN_TSR_ALST2_Msk (0x1U << CAN_TSR_ALST2_Pos) /*!< 0x00040000 */
-#define CAN_TSR_ALST2 CAN_TSR_ALST2_Msk /*!< Arbitration Lost for mailbox 2 */
-#define CAN_TSR_TERR2_Pos (19U)
-#define CAN_TSR_TERR2_Msk (0x1U << CAN_TSR_TERR2_Pos) /*!< 0x00080000 */
-#define CAN_TSR_TERR2 CAN_TSR_TERR2_Msk /*!< Transmission Error of Mailbox 2 */
-#define CAN_TSR_ABRQ2_Pos (23U)
-#define CAN_TSR_ABRQ2_Msk (0x1U << CAN_TSR_ABRQ2_Pos) /*!< 0x00800000 */
-#define CAN_TSR_ABRQ2 CAN_TSR_ABRQ2_Msk /*!< Abort Request for Mailbox 2 */
-#define CAN_TSR_CODE_Pos (24U)
-#define CAN_TSR_CODE_Msk (0x3U << CAN_TSR_CODE_Pos) /*!< 0x03000000 */
-#define CAN_TSR_CODE CAN_TSR_CODE_Msk /*!< Mailbox Code */
-
-#define CAN_TSR_TME_Pos (26U)
-#define CAN_TSR_TME_Msk (0x7U << CAN_TSR_TME_Pos) /*!< 0x1C000000 */
-#define CAN_TSR_TME CAN_TSR_TME_Msk /*!< TME[2:0] bits */
-#define CAN_TSR_TME0_Pos (26U)
-#define CAN_TSR_TME0_Msk (0x1U << CAN_TSR_TME0_Pos) /*!< 0x04000000 */
-#define CAN_TSR_TME0 CAN_TSR_TME0_Msk /*!< Transmit Mailbox 0 Empty */
-#define CAN_TSR_TME1_Pos (27U)
-#define CAN_TSR_TME1_Msk (0x1U << CAN_TSR_TME1_Pos) /*!< 0x08000000 */
-#define CAN_TSR_TME1 CAN_TSR_TME1_Msk /*!< Transmit Mailbox 1 Empty */
-#define CAN_TSR_TME2_Pos (28U)
-#define CAN_TSR_TME2_Msk (0x1U << CAN_TSR_TME2_Pos) /*!< 0x10000000 */
-#define CAN_TSR_TME2 CAN_TSR_TME2_Msk /*!< Transmit Mailbox 2 Empty */
-
-#define CAN_TSR_LOW_Pos (29U)
-#define CAN_TSR_LOW_Msk (0x7U << CAN_TSR_LOW_Pos) /*!< 0xE0000000 */
-#define CAN_TSR_LOW CAN_TSR_LOW_Msk /*!< LOW[2:0] bits */
-#define CAN_TSR_LOW0_Pos (29U)
-#define CAN_TSR_LOW0_Msk (0x1U << CAN_TSR_LOW0_Pos) /*!< 0x20000000 */
-#define CAN_TSR_LOW0 CAN_TSR_LOW0_Msk /*!< Lowest Priority Flag for Mailbox 0 */
-#define CAN_TSR_LOW1_Pos (30U)
-#define CAN_TSR_LOW1_Msk (0x1U << CAN_TSR_LOW1_Pos) /*!< 0x40000000 */
-#define CAN_TSR_LOW1 CAN_TSR_LOW1_Msk /*!< Lowest Priority Flag for Mailbox 1 */
-#define CAN_TSR_LOW2_Pos (31U)
-#define CAN_TSR_LOW2_Msk (0x1U << CAN_TSR_LOW2_Pos) /*!< 0x80000000 */
-#define CAN_TSR_LOW2 CAN_TSR_LOW2_Msk /*!< Lowest Priority Flag for Mailbox 2 */
-
-/******************* Bit definition for CAN_RF0R register *******************/
-#define CAN_RF0R_FMP0_Pos (0U)
-#define CAN_RF0R_FMP0_Msk (0x3U << CAN_RF0R_FMP0_Pos) /*!< 0x00000003 */
-#define CAN_RF0R_FMP0 CAN_RF0R_FMP0_Msk /*!< FIFO 0 Message Pending */
-#define CAN_RF0R_FULL0_Pos (3U)
-#define CAN_RF0R_FULL0_Msk (0x1U << CAN_RF0R_FULL0_Pos) /*!< 0x00000008 */
-#define CAN_RF0R_FULL0 CAN_RF0R_FULL0_Msk /*!< FIFO 0 Full */
-#define CAN_RF0R_FOVR0_Pos (4U)
-#define CAN_RF0R_FOVR0_Msk (0x1U << CAN_RF0R_FOVR0_Pos) /*!< 0x00000010 */
-#define CAN_RF0R_FOVR0 CAN_RF0R_FOVR0_Msk /*!< FIFO 0 Overrun */
-#define CAN_RF0R_RFOM0_Pos (5U)
-#define CAN_RF0R_RFOM0_Msk (0x1U << CAN_RF0R_RFOM0_Pos) /*!< 0x00000020 */
-#define CAN_RF0R_RFOM0 CAN_RF0R_RFOM0_Msk /*!< Release FIFO 0 Output Mailbox */
-
-/******************* Bit definition for CAN_RF1R register *******************/
-#define CAN_RF1R_FMP1_Pos (0U)
-#define CAN_RF1R_FMP1_Msk (0x3U << CAN_RF1R_FMP1_Pos) /*!< 0x00000003 */
-#define CAN_RF1R_FMP1 CAN_RF1R_FMP1_Msk /*!< FIFO 1 Message Pending */
-#define CAN_RF1R_FULL1_Pos (3U)
-#define CAN_RF1R_FULL1_Msk (0x1U << CAN_RF1R_FULL1_Pos) /*!< 0x00000008 */
-#define CAN_RF1R_FULL1 CAN_RF1R_FULL1_Msk /*!< FIFO 1 Full */
-#define CAN_RF1R_FOVR1_Pos (4U)
-#define CAN_RF1R_FOVR1_Msk (0x1U << CAN_RF1R_FOVR1_Pos) /*!< 0x00000010 */
-#define CAN_RF1R_FOVR1 CAN_RF1R_FOVR1_Msk /*!< FIFO 1 Overrun */
-#define CAN_RF1R_RFOM1_Pos (5U)
-#define CAN_RF1R_RFOM1_Msk (0x1U << CAN_RF1R_RFOM1_Pos) /*!< 0x00000020 */
-#define CAN_RF1R_RFOM1 CAN_RF1R_RFOM1_Msk /*!< Release FIFO 1 Output Mailbox */
-
-/******************** Bit definition for CAN_IER register *******************/
-#define CAN_IER_TMEIE_Pos (0U)
-#define CAN_IER_TMEIE_Msk (0x1U << CAN_IER_TMEIE_Pos) /*!< 0x00000001 */
-#define CAN_IER_TMEIE CAN_IER_TMEIE_Msk /*!< Transmit Mailbox Empty Interrupt Enable */
-#define CAN_IER_FMPIE0_Pos (1U)
-#define CAN_IER_FMPIE0_Msk (0x1U << CAN_IER_FMPIE0_Pos) /*!< 0x00000002 */
-#define CAN_IER_FMPIE0 CAN_IER_FMPIE0_Msk /*!< FIFO Message Pending Interrupt Enable */
-#define CAN_IER_FFIE0_Pos (2U)
-#define CAN_IER_FFIE0_Msk (0x1U << CAN_IER_FFIE0_Pos) /*!< 0x00000004 */
-#define CAN_IER_FFIE0 CAN_IER_FFIE0_Msk /*!< FIFO Full Interrupt Enable */
-#define CAN_IER_FOVIE0_Pos (3U)
-#define CAN_IER_FOVIE0_Msk (0x1U << CAN_IER_FOVIE0_Pos) /*!< 0x00000008 */
-#define CAN_IER_FOVIE0 CAN_IER_FOVIE0_Msk /*!< FIFO Overrun Interrupt Enable */
-#define CAN_IER_FMPIE1_Pos (4U)
-#define CAN_IER_FMPIE1_Msk (0x1U << CAN_IER_FMPIE1_Pos) /*!< 0x00000010 */
-#define CAN_IER_FMPIE1 CAN_IER_FMPIE1_Msk /*!< FIFO Message Pending Interrupt Enable */
-#define CAN_IER_FFIE1_Pos (5U)
-#define CAN_IER_FFIE1_Msk (0x1U << CAN_IER_FFIE1_Pos) /*!< 0x00000020 */
-#define CAN_IER_FFIE1 CAN_IER_FFIE1_Msk /*!< FIFO Full Interrupt Enable */
-#define CAN_IER_FOVIE1_Pos (6U)
-#define CAN_IER_FOVIE1_Msk (0x1U << CAN_IER_FOVIE1_Pos) /*!< 0x00000040 */
-#define CAN_IER_FOVIE1 CAN_IER_FOVIE1_Msk /*!< FIFO Overrun Interrupt Enable */
-#define CAN_IER_EWGIE_Pos (8U)
-#define CAN_IER_EWGIE_Msk (0x1U << CAN_IER_EWGIE_Pos) /*!< 0x00000100 */
-#define CAN_IER_EWGIE CAN_IER_EWGIE_Msk /*!< Error Warning Interrupt Enable */
-#define CAN_IER_EPVIE_Pos (9U)
-#define CAN_IER_EPVIE_Msk (0x1U << CAN_IER_EPVIE_Pos) /*!< 0x00000200 */
-#define CAN_IER_EPVIE CAN_IER_EPVIE_Msk /*!< Error Passive Interrupt Enable */
-#define CAN_IER_BOFIE_Pos (10U)
-#define CAN_IER_BOFIE_Msk (0x1U << CAN_IER_BOFIE_Pos) /*!< 0x00000400 */
-#define CAN_IER_BOFIE CAN_IER_BOFIE_Msk /*!< Bus-Off Interrupt Enable */
-#define CAN_IER_LECIE_Pos (11U)
-#define CAN_IER_LECIE_Msk (0x1U << CAN_IER_LECIE_Pos) /*!< 0x00000800 */
-#define CAN_IER_LECIE CAN_IER_LECIE_Msk /*!< Last Error Code Interrupt Enable */
-#define CAN_IER_ERRIE_Pos (15U)
-#define CAN_IER_ERRIE_Msk (0x1U << CAN_IER_ERRIE_Pos) /*!< 0x00008000 */
-#define CAN_IER_ERRIE CAN_IER_ERRIE_Msk /*!< Error Interrupt Enable */
-#define CAN_IER_WKUIE_Pos (16U)
-#define CAN_IER_WKUIE_Msk (0x1U << CAN_IER_WKUIE_Pos) /*!< 0x00010000 */
-#define CAN_IER_WKUIE CAN_IER_WKUIE_Msk /*!< Wakeup Interrupt Enable */
-#define CAN_IER_SLKIE_Pos (17U)
-#define CAN_IER_SLKIE_Msk (0x1U << CAN_IER_SLKIE_Pos) /*!< 0x00020000 */
-#define CAN_IER_SLKIE CAN_IER_SLKIE_Msk /*!< Sleep Interrupt Enable */
-
-/******************** Bit definition for CAN_ESR register *******************/
-#define CAN_ESR_EWGF_Pos (0U)
-#define CAN_ESR_EWGF_Msk (0x1U << CAN_ESR_EWGF_Pos) /*!< 0x00000001 */
-#define CAN_ESR_EWGF CAN_ESR_EWGF_Msk /*!< Error Warning Flag */
-#define CAN_ESR_EPVF_Pos (1U)
-#define CAN_ESR_EPVF_Msk (0x1U << CAN_ESR_EPVF_Pos) /*!< 0x00000002 */
-#define CAN_ESR_EPVF CAN_ESR_EPVF_Msk /*!< Error Passive Flag */
-#define CAN_ESR_BOFF_Pos (2U)
-#define CAN_ESR_BOFF_Msk (0x1U << CAN_ESR_BOFF_Pos) /*!< 0x00000004 */
-#define CAN_ESR_BOFF CAN_ESR_BOFF_Msk /*!< Bus-Off Flag */
-
-#define CAN_ESR_LEC_Pos (4U)
-#define CAN_ESR_LEC_Msk (0x7U << CAN_ESR_LEC_Pos) /*!< 0x00000070 */
-#define CAN_ESR_LEC CAN_ESR_LEC_Msk /*!< LEC[2:0] bits (Last Error Code) */
-#define CAN_ESR_LEC_0 (0x1U << CAN_ESR_LEC_Pos) /*!< 0x00000010 */
-#define CAN_ESR_LEC_1 (0x2U << CAN_ESR_LEC_Pos) /*!< 0x00000020 */
-#define CAN_ESR_LEC_2 (0x4U << CAN_ESR_LEC_Pos) /*!< 0x00000040 */
-
-#define CAN_ESR_TEC_Pos (16U)
-#define CAN_ESR_TEC_Msk (0xFFU << CAN_ESR_TEC_Pos) /*!< 0x00FF0000 */
-#define CAN_ESR_TEC CAN_ESR_TEC_Msk /*!< Least significant byte of the 9-bit Transmit Error Counter */
-#define CAN_ESR_REC_Pos (24U)
-#define CAN_ESR_REC_Msk (0xFFU << CAN_ESR_REC_Pos) /*!< 0xFF000000 */
-#define CAN_ESR_REC CAN_ESR_REC_Msk /*!< Receive Error Counter */
-
-/******************* Bit definition for CAN_BTR register ********************/
-#define CAN_BTR_BRP_Pos (0U)
-#define CAN_BTR_BRP_Msk (0x3FFU << CAN_BTR_BRP_Pos) /*!< 0x000003FF */
-#define CAN_BTR_BRP CAN_BTR_BRP_Msk /*!<Baud Rate Prescaler */
-#define CAN_BTR_TS1_Pos (16U)
-#define CAN_BTR_TS1_Msk (0xFU << CAN_BTR_TS1_Pos) /*!< 0x000F0000 */
-#define CAN_BTR_TS1 CAN_BTR_TS1_Msk /*!<Time Segment 1 */
-#define CAN_BTR_TS1_0 (0x1U << CAN_BTR_TS1_Pos) /*!< 0x00010000 */
-#define CAN_BTR_TS1_1 (0x2U << CAN_BTR_TS1_Pos) /*!< 0x00020000 */
-#define CAN_BTR_TS1_2 (0x4U << CAN_BTR_TS1_Pos) /*!< 0x00040000 */
-#define CAN_BTR_TS1_3 (0x8U << CAN_BTR_TS1_Pos) /*!< 0x00080000 */
-#define CAN_BTR_TS2_Pos (20U)
-#define CAN_BTR_TS2_Msk (0x7U << CAN_BTR_TS2_Pos) /*!< 0x00700000 */
-#define CAN_BTR_TS2 CAN_BTR_TS2_Msk /*!<Time Segment 2 */
-#define CAN_BTR_TS2_0 (0x1U << CAN_BTR_TS2_Pos) /*!< 0x00100000 */
-#define CAN_BTR_TS2_1 (0x2U << CAN_BTR_TS2_Pos) /*!< 0x00200000 */
-#define CAN_BTR_TS2_2 (0x4U << CAN_BTR_TS2_Pos) /*!< 0x00400000 */
-#define CAN_BTR_SJW_Pos (24U)
-#define CAN_BTR_SJW_Msk (0x3U << CAN_BTR_SJW_Pos) /*!< 0x03000000 */
-#define CAN_BTR_SJW CAN_BTR_SJW_Msk /*!<Resynchronization Jump Width */
-#define CAN_BTR_SJW_0 (0x1U << CAN_BTR_SJW_Pos) /*!< 0x01000000 */
-#define CAN_BTR_SJW_1 (0x2U << CAN_BTR_SJW_Pos) /*!< 0x02000000 */
-#define CAN_BTR_LBKM_Pos (30U)
-#define CAN_BTR_LBKM_Msk (0x1U << CAN_BTR_LBKM_Pos) /*!< 0x40000000 */
-#define CAN_BTR_LBKM CAN_BTR_LBKM_Msk /*!<Loop Back Mode (Debug) */
-#define CAN_BTR_SILM_Pos (31U)
-#define CAN_BTR_SILM_Msk (0x1U << CAN_BTR_SILM_Pos) /*!< 0x80000000 */
-#define CAN_BTR_SILM CAN_BTR_SILM_Msk /*!<Silent Mode */
-
-/*!< Mailbox registers */
-/****************** Bit definition for CAN_TI0R register ********************/
-#define CAN_TI0R_TXRQ_Pos (0U)
-#define CAN_TI0R_TXRQ_Msk (0x1U << CAN_TI0R_TXRQ_Pos) /*!< 0x00000001 */
-#define CAN_TI0R_TXRQ CAN_TI0R_TXRQ_Msk /*!< Transmit Mailbox Request */
-#define CAN_TI0R_RTR_Pos (1U)
-#define CAN_TI0R_RTR_Msk (0x1U << CAN_TI0R_RTR_Pos) /*!< 0x00000002 */
-#define CAN_TI0R_RTR CAN_TI0R_RTR_Msk /*!< Remote Transmission Request */
-#define CAN_TI0R_IDE_Pos (2U)
-#define CAN_TI0R_IDE_Msk (0x1U << CAN_TI0R_IDE_Pos) /*!< 0x00000004 */
-#define CAN_TI0R_IDE CAN_TI0R_IDE_Msk /*!< Identifier Extension */
-#define CAN_TI0R_EXID_Pos (3U)
-#define CAN_TI0R_EXID_Msk (0x3FFFFU << CAN_TI0R_EXID_Pos) /*!< 0x001FFFF8 */
-#define CAN_TI0R_EXID CAN_TI0R_EXID_Msk /*!< Extended Identifier */
-#define CAN_TI0R_STID_Pos (21U)
-#define CAN_TI0R_STID_Msk (0x7FFU << CAN_TI0R_STID_Pos) /*!< 0xFFE00000 */
-#define CAN_TI0R_STID CAN_TI0R_STID_Msk /*!< Standard Identifier or Extended Identifier */
-
-/****************** Bit definition for CAN_TDT0R register *******************/
-#define CAN_TDT0R_DLC_Pos (0U)
-#define CAN_TDT0R_DLC_Msk (0xFU << CAN_TDT0R_DLC_Pos) /*!< 0x0000000F */
-#define CAN_TDT0R_DLC CAN_TDT0R_DLC_Msk /*!< Data Length Code */
-#define CAN_TDT0R_TGT_Pos (8U)
-#define CAN_TDT0R_TGT_Msk (0x1U << CAN_TDT0R_TGT_Pos) /*!< 0x00000100 */
-#define CAN_TDT0R_TGT CAN_TDT0R_TGT_Msk /*!< Transmit Global Time */
-#define CAN_TDT0R_TIME_Pos (16U)
-#define CAN_TDT0R_TIME_Msk (0xFFFFU << CAN_TDT0R_TIME_Pos) /*!< 0xFFFF0000 */
-#define CAN_TDT0R_TIME CAN_TDT0R_TIME_Msk /*!< Message Time Stamp */
-
-/****************** Bit definition for CAN_TDL0R register *******************/
-#define CAN_TDL0R_DATA0_Pos (0U)
-#define CAN_TDL0R_DATA0_Msk (0xFFU << CAN_TDL0R_DATA0_Pos) /*!< 0x000000FF */
-#define CAN_TDL0R_DATA0 CAN_TDL0R_DATA0_Msk /*!< Data byte 0 */
-#define CAN_TDL0R_DATA1_Pos (8U)
-#define CAN_TDL0R_DATA1_Msk (0xFFU << CAN_TDL0R_DATA1_Pos) /*!< 0x0000FF00 */
-#define CAN_TDL0R_DATA1 CAN_TDL0R_DATA1_Msk /*!< Data byte 1 */
-#define CAN_TDL0R_DATA2_Pos (16U)
-#define CAN_TDL0R_DATA2_Msk (0xFFU << CAN_TDL0R_DATA2_Pos) /*!< 0x00FF0000 */
-#define CAN_TDL0R_DATA2 CAN_TDL0R_DATA2_Msk /*!< Data byte 2 */
-#define CAN_TDL0R_DATA3_Pos (24U)
-#define CAN_TDL0R_DATA3_Msk (0xFFU << CAN_TDL0R_DATA3_Pos) /*!< 0xFF000000 */
-#define CAN_TDL0R_DATA3 CAN_TDL0R_DATA3_Msk /*!< Data byte 3 */
-
-/****************** Bit definition for CAN_TDH0R register *******************/
-#define CAN_TDH0R_DATA4_Pos (0U)
-#define CAN_TDH0R_DATA4_Msk (0xFFU << CAN_TDH0R_DATA4_Pos) /*!< 0x000000FF */
-#define CAN_TDH0R_DATA4 CAN_TDH0R_DATA4_Msk /*!< Data byte 4 */
-#define CAN_TDH0R_DATA5_Pos (8U)
-#define CAN_TDH0R_DATA5_Msk (0xFFU << CAN_TDH0R_DATA5_Pos) /*!< 0x0000FF00 */
-#define CAN_TDH0R_DATA5 CAN_TDH0R_DATA5_Msk /*!< Data byte 5 */
-#define CAN_TDH0R_DATA6_Pos (16U)
-#define CAN_TDH0R_DATA6_Msk (0xFFU << CAN_TDH0R_DATA6_Pos) /*!< 0x00FF0000 */
-#define CAN_TDH0R_DATA6 CAN_TDH0R_DATA6_Msk /*!< Data byte 6 */
-#define CAN_TDH0R_DATA7_Pos (24U)
-#define CAN_TDH0R_DATA7_Msk (0xFFU << CAN_TDH0R_DATA7_Pos) /*!< 0xFF000000 */
-#define CAN_TDH0R_DATA7 CAN_TDH0R_DATA7_Msk /*!< Data byte 7 */
-
-/******************* Bit definition for CAN_TI1R register *******************/
-#define CAN_TI1R_TXRQ_Pos (0U)
-#define CAN_TI1R_TXRQ_Msk (0x1U << CAN_TI1R_TXRQ_Pos) /*!< 0x00000001 */
-#define CAN_TI1R_TXRQ CAN_TI1R_TXRQ_Msk /*!< Transmit Mailbox Request */
-#define CAN_TI1R_RTR_Pos (1U)
-#define CAN_TI1R_RTR_Msk (0x1U << CAN_TI1R_RTR_Pos) /*!< 0x00000002 */
-#define CAN_TI1R_RTR CAN_TI1R_RTR_Msk /*!< Remote Transmission Request */
-#define CAN_TI1R_IDE_Pos (2U)
-#define CAN_TI1R_IDE_Msk (0x1U << CAN_TI1R_IDE_Pos) /*!< 0x00000004 */
-#define CAN_TI1R_IDE CAN_TI1R_IDE_Msk /*!< Identifier Extension */
-#define CAN_TI1R_EXID_Pos (3U)
-#define CAN_TI1R_EXID_Msk (0x3FFFFU << CAN_TI1R_EXID_Pos) /*!< 0x001FFFF8 */
-#define CAN_TI1R_EXID CAN_TI1R_EXID_Msk /*!< Extended Identifier */
-#define CAN_TI1R_STID_Pos (21U)
-#define CAN_TI1R_STID_Msk (0x7FFU << CAN_TI1R_STID_Pos) /*!< 0xFFE00000 */
-#define CAN_TI1R_STID CAN_TI1R_STID_Msk /*!< Standard Identifier or Extended Identifier */
-
-/******************* Bit definition for CAN_TDT1R register ******************/
-#define CAN_TDT1R_DLC_Pos (0U)
-#define CAN_TDT1R_DLC_Msk (0xFU << CAN_TDT1R_DLC_Pos) /*!< 0x0000000F */
-#define CAN_TDT1R_DLC CAN_TDT1R_DLC_Msk /*!< Data Length Code */
-#define CAN_TDT1R_TGT_Pos (8U)
-#define CAN_TDT1R_TGT_Msk (0x1U << CAN_TDT1R_TGT_Pos) /*!< 0x00000100 */
-#define CAN_TDT1R_TGT CAN_TDT1R_TGT_Msk /*!< Transmit Global Time */
-#define CAN_TDT1R_TIME_Pos (16U)
-#define CAN_TDT1R_TIME_Msk (0xFFFFU << CAN_TDT1R_TIME_Pos) /*!< 0xFFFF0000 */
-#define CAN_TDT1R_TIME CAN_TDT1R_TIME_Msk /*!< Message Time Stamp */
-
-/******************* Bit definition for CAN_TDL1R register ******************/
-#define CAN_TDL1R_DATA0_Pos (0U)
-#define CAN_TDL1R_DATA0_Msk (0xFFU << CAN_TDL1R_DATA0_Pos) /*!< 0x000000FF */
-#define CAN_TDL1R_DATA0 CAN_TDL1R_DATA0_Msk /*!< Data byte 0 */
-#define CAN_TDL1R_DATA1_Pos (8U)
-#define CAN_TDL1R_DATA1_Msk (0xFFU << CAN_TDL1R_DATA1_Pos) /*!< 0x0000FF00 */
-#define CAN_TDL1R_DATA1 CAN_TDL1R_DATA1_Msk /*!< Data byte 1 */
-#define CAN_TDL1R_DATA2_Pos (16U)
-#define CAN_TDL1R_DATA2_Msk (0xFFU << CAN_TDL1R_DATA2_Pos) /*!< 0x00FF0000 */
-#define CAN_TDL1R_DATA2 CAN_TDL1R_DATA2_Msk /*!< Data byte 2 */
-#define CAN_TDL1R_DATA3_Pos (24U)
-#define CAN_TDL1R_DATA3_Msk (0xFFU << CAN_TDL1R_DATA3_Pos) /*!< 0xFF000000 */
-#define CAN_TDL1R_DATA3 CAN_TDL1R_DATA3_Msk /*!< Data byte 3 */
-
-/******************* Bit definition for CAN_TDH1R register ******************/
-#define CAN_TDH1R_DATA4_Pos (0U)
-#define CAN_TDH1R_DATA4_Msk (0xFFU << CAN_TDH1R_DATA4_Pos) /*!< 0x000000FF */
-#define CAN_TDH1R_DATA4 CAN_TDH1R_DATA4_Msk /*!< Data byte 4 */
-#define CAN_TDH1R_DATA5_Pos (8U)
-#define CAN_TDH1R_DATA5_Msk (0xFFU << CAN_TDH1R_DATA5_Pos) /*!< 0x0000FF00 */
-#define CAN_TDH1R_DATA5 CAN_TDH1R_DATA5_Msk /*!< Data byte 5 */
-#define CAN_TDH1R_DATA6_Pos (16U)
-#define CAN_TDH1R_DATA6_Msk (0xFFU << CAN_TDH1R_DATA6_Pos) /*!< 0x00FF0000 */
-#define CAN_TDH1R_DATA6 CAN_TDH1R_DATA6_Msk /*!< Data byte 6 */
-#define CAN_TDH1R_DATA7_Pos (24U)
-#define CAN_TDH1R_DATA7_Msk (0xFFU << CAN_TDH1R_DATA7_Pos) /*!< 0xFF000000 */
-#define CAN_TDH1R_DATA7 CAN_TDH1R_DATA7_Msk /*!< Data byte 7 */
-
-/******************* Bit definition for CAN_TI2R register *******************/
-#define CAN_TI2R_TXRQ_Pos (0U)
-#define CAN_TI2R_TXRQ_Msk (0x1U << CAN_TI2R_TXRQ_Pos) /*!< 0x00000001 */
-#define CAN_TI2R_TXRQ CAN_TI2R_TXRQ_Msk /*!< Transmit Mailbox Request */
-#define CAN_TI2R_RTR_Pos (1U)
-#define CAN_TI2R_RTR_Msk (0x1U << CAN_TI2R_RTR_Pos) /*!< 0x00000002 */
-#define CAN_TI2R_RTR CAN_TI2R_RTR_Msk /*!< Remote Transmission Request */
-#define CAN_TI2R_IDE_Pos (2U)
-#define CAN_TI2R_IDE_Msk (0x1U << CAN_TI2R_IDE_Pos) /*!< 0x00000004 */
-#define CAN_TI2R_IDE CAN_TI2R_IDE_Msk /*!< Identifier Extension */
-#define CAN_TI2R_EXID_Pos (3U)
-#define CAN_TI2R_EXID_Msk (0x3FFFFU << CAN_TI2R_EXID_Pos) /*!< 0x001FFFF8 */
-#define CAN_TI2R_EXID CAN_TI2R_EXID_Msk /*!< Extended identifier */
-#define CAN_TI2R_STID_Pos (21U)
-#define CAN_TI2R_STID_Msk (0x7FFU << CAN_TI2R_STID_Pos) /*!< 0xFFE00000 */
-#define CAN_TI2R_STID CAN_TI2R_STID_Msk /*!< Standard Identifier or Extended Identifier */
-
-/******************* Bit definition for CAN_TDT2R register ******************/
-#define CAN_TDT2R_DLC_Pos (0U)
-#define CAN_TDT2R_DLC_Msk (0xFU << CAN_TDT2R_DLC_Pos) /*!< 0x0000000F */
-#define CAN_TDT2R_DLC CAN_TDT2R_DLC_Msk /*!< Data Length Code */
-#define CAN_TDT2R_TGT_Pos (8U)
-#define CAN_TDT2R_TGT_Msk (0x1U << CAN_TDT2R_TGT_Pos) /*!< 0x00000100 */
-#define CAN_TDT2R_TGT CAN_TDT2R_TGT_Msk /*!< Transmit Global Time */
-#define CAN_TDT2R_TIME_Pos (16U)
-#define CAN_TDT2R_TIME_Msk (0xFFFFU << CAN_TDT2R_TIME_Pos) /*!< 0xFFFF0000 */
-#define CAN_TDT2R_TIME CAN_TDT2R_TIME_Msk /*!< Message Time Stamp */
-
-/******************* Bit definition for CAN_TDL2R register ******************/
-#define CAN_TDL2R_DATA0_Pos (0U)
-#define CAN_TDL2R_DATA0_Msk (0xFFU << CAN_TDL2R_DATA0_Pos) /*!< 0x000000FF */
-#define CAN_TDL2R_DATA0 CAN_TDL2R_DATA0_Msk /*!< Data byte 0 */
-#define CAN_TDL2R_DATA1_Pos (8U)
-#define CAN_TDL2R_DATA1_Msk (0xFFU << CAN_TDL2R_DATA1_Pos) /*!< 0x0000FF00 */
-#define CAN_TDL2R_DATA1 CAN_TDL2R_DATA1_Msk /*!< Data byte 1 */
-#define CAN_TDL2R_DATA2_Pos (16U)
-#define CAN_TDL2R_DATA2_Msk (0xFFU << CAN_TDL2R_DATA2_Pos) /*!< 0x00FF0000 */
-#define CAN_TDL2R_DATA2 CAN_TDL2R_DATA2_Msk /*!< Data byte 2 */
-#define CAN_TDL2R_DATA3_Pos (24U)
-#define CAN_TDL2R_DATA3_Msk (0xFFU << CAN_TDL2R_DATA3_Pos) /*!< 0xFF000000 */
-#define CAN_TDL2R_DATA3 CAN_TDL2R_DATA3_Msk /*!< Data byte 3 */
-
-/******************* Bit definition for CAN_TDH2R register ******************/
-#define CAN_TDH2R_DATA4_Pos (0U)
-#define CAN_TDH2R_DATA4_Msk (0xFFU << CAN_TDH2R_DATA4_Pos) /*!< 0x000000FF */
-#define CAN_TDH2R_DATA4 CAN_TDH2R_DATA4_Msk /*!< Data byte 4 */
-#define CAN_TDH2R_DATA5_Pos (8U)
-#define CAN_TDH2R_DATA5_Msk (0xFFU << CAN_TDH2R_DATA5_Pos) /*!< 0x0000FF00 */
-#define CAN_TDH2R_DATA5 CAN_TDH2R_DATA5_Msk /*!< Data byte 5 */
-#define CAN_TDH2R_DATA6_Pos (16U)
-#define CAN_TDH2R_DATA6_Msk (0xFFU << CAN_TDH2R_DATA6_Pos) /*!< 0x00FF0000 */
-#define CAN_TDH2R_DATA6 CAN_TDH2R_DATA6_Msk /*!< Data byte 6 */
-#define CAN_TDH2R_DATA7_Pos (24U)
-#define CAN_TDH2R_DATA7_Msk (0xFFU << CAN_TDH2R_DATA7_Pos) /*!< 0xFF000000 */
-#define CAN_TDH2R_DATA7 CAN_TDH2R_DATA7_Msk /*!< Data byte 7 */
-
-/******************* Bit definition for CAN_RI0R register *******************/
-#define CAN_RI0R_RTR_Pos (1U)
-#define CAN_RI0R_RTR_Msk (0x1U << CAN_RI0R_RTR_Pos) /*!< 0x00000002 */
-#define CAN_RI0R_RTR CAN_RI0R_RTR_Msk /*!< Remote Transmission Request */
-#define CAN_RI0R_IDE_Pos (2U)
-#define CAN_RI0R_IDE_Msk (0x1U << CAN_RI0R_IDE_Pos) /*!< 0x00000004 */
-#define CAN_RI0R_IDE CAN_RI0R_IDE_Msk /*!< Identifier Extension */
-#define CAN_RI0R_EXID_Pos (3U)
-#define CAN_RI0R_EXID_Msk (0x3FFFFU << CAN_RI0R_EXID_Pos) /*!< 0x001FFFF8 */
-#define CAN_RI0R_EXID CAN_RI0R_EXID_Msk /*!< Extended Identifier */
-#define CAN_RI0R_STID_Pos (21U)
-#define CAN_RI0R_STID_Msk (0x7FFU << CAN_RI0R_STID_Pos) /*!< 0xFFE00000 */
-#define CAN_RI0R_STID CAN_RI0R_STID_Msk /*!< Standard Identifier or Extended Identifier */
-
-/******************* Bit definition for CAN_RDT0R register ******************/
-#define CAN_RDT0R_DLC_Pos (0U)
-#define CAN_RDT0R_DLC_Msk (0xFU << CAN_RDT0R_DLC_Pos) /*!< 0x0000000F */
-#define CAN_RDT0R_DLC CAN_RDT0R_DLC_Msk /*!< Data Length Code */
-#define CAN_RDT0R_FMI_Pos (8U)
-#define CAN_RDT0R_FMI_Msk (0xFFU << CAN_RDT0R_FMI_Pos) /*!< 0x0000FF00 */
-#define CAN_RDT0R_FMI CAN_RDT0R_FMI_Msk /*!< Filter Match Index */
-#define CAN_RDT0R_TIME_Pos (16U)
-#define CAN_RDT0R_TIME_Msk (0xFFFFU << CAN_RDT0R_TIME_Pos) /*!< 0xFFFF0000 */
-#define CAN_RDT0R_TIME CAN_RDT0R_TIME_Msk /*!< Message Time Stamp */
-
-/******************* Bit definition for CAN_RDL0R register ******************/
-#define CAN_RDL0R_DATA0_Pos (0U)
-#define CAN_RDL0R_DATA0_Msk (0xFFU << CAN_RDL0R_DATA0_Pos) /*!< 0x000000FF */
-#define CAN_RDL0R_DATA0 CAN_RDL0R_DATA0_Msk /*!< Data byte 0 */
-#define CAN_RDL0R_DATA1_Pos (8U)
-#define CAN_RDL0R_DATA1_Msk (0xFFU << CAN_RDL0R_DATA1_Pos) /*!< 0x0000FF00 */
-#define CAN_RDL0R_DATA1 CAN_RDL0R_DATA1_Msk /*!< Data byte 1 */
-#define CAN_RDL0R_DATA2_Pos (16U)
-#define CAN_RDL0R_DATA2_Msk (0xFFU << CAN_RDL0R_DATA2_Pos) /*!< 0x00FF0000 */
-#define CAN_RDL0R_DATA2 CAN_RDL0R_DATA2_Msk /*!< Data byte 2 */
-#define CAN_RDL0R_DATA3_Pos (24U)
-#define CAN_RDL0R_DATA3_Msk (0xFFU << CAN_RDL0R_DATA3_Pos) /*!< 0xFF000000 */
-#define CAN_RDL0R_DATA3 CAN_RDL0R_DATA3_Msk /*!< Data byte 3 */
-
-/******************* Bit definition for CAN_RDH0R register ******************/
-#define CAN_RDH0R_DATA4_Pos (0U)
-#define CAN_RDH0R_DATA4_Msk (0xFFU << CAN_RDH0R_DATA4_Pos) /*!< 0x000000FF */
-#define CAN_RDH0R_DATA4 CAN_RDH0R_DATA4_Msk /*!< Data byte 4 */
-#define CAN_RDH0R_DATA5_Pos (8U)
-#define CAN_RDH0R_DATA5_Msk (0xFFU << CAN_RDH0R_DATA5_Pos) /*!< 0x0000FF00 */
-#define CAN_RDH0R_DATA5 CAN_RDH0R_DATA5_Msk /*!< Data byte 5 */
-#define CAN_RDH0R_DATA6_Pos (16U)
-#define CAN_RDH0R_DATA6_Msk (0xFFU << CAN_RDH0R_DATA6_Pos) /*!< 0x00FF0000 */
-#define CAN_RDH0R_DATA6 CAN_RDH0R_DATA6_Msk /*!< Data byte 6 */
-#define CAN_RDH0R_DATA7_Pos (24U)
-#define CAN_RDH0R_DATA7_Msk (0xFFU << CAN_RDH0R_DATA7_Pos) /*!< 0xFF000000 */
-#define CAN_RDH0R_DATA7 CAN_RDH0R_DATA7_Msk /*!< Data byte 7 */
-
-/******************* Bit definition for CAN_RI1R register *******************/
-#define CAN_RI1R_RTR_Pos (1U)
-#define CAN_RI1R_RTR_Msk (0x1U << CAN_RI1R_RTR_Pos) /*!< 0x00000002 */
-#define CAN_RI1R_RTR CAN_RI1R_RTR_Msk /*!< Remote Transmission Request */
-#define CAN_RI1R_IDE_Pos (2U)
-#define CAN_RI1R_IDE_Msk (0x1U << CAN_RI1R_IDE_Pos) /*!< 0x00000004 */
-#define CAN_RI1R_IDE CAN_RI1R_IDE_Msk /*!< Identifier Extension */
-#define CAN_RI1R_EXID_Pos (3U)
-#define CAN_RI1R_EXID_Msk (0x3FFFFU << CAN_RI1R_EXID_Pos) /*!< 0x001FFFF8 */
-#define CAN_RI1R_EXID CAN_RI1R_EXID_Msk /*!< Extended identifier */
-#define CAN_RI1R_STID_Pos (21U)
-#define CAN_RI1R_STID_Msk (0x7FFU << CAN_RI1R_STID_Pos) /*!< 0xFFE00000 */
-#define CAN_RI1R_STID CAN_RI1R_STID_Msk /*!< Standard Identifier or Extended Identifier */
-
-/******************* Bit definition for CAN_RDT1R register ******************/
-#define CAN_RDT1R_DLC_Pos (0U)
-#define CAN_RDT1R_DLC_Msk (0xFU << CAN_RDT1R_DLC_Pos) /*!< 0x0000000F */
-#define CAN_RDT1R_DLC CAN_RDT1R_DLC_Msk /*!< Data Length Code */
-#define CAN_RDT1R_FMI_Pos (8U)
-#define CAN_RDT1R_FMI_Msk (0xFFU << CAN_RDT1R_FMI_Pos) /*!< 0x0000FF00 */
-#define CAN_RDT1R_FMI CAN_RDT1R_FMI_Msk /*!< Filter Match Index */
-#define CAN_RDT1R_TIME_Pos (16U)
-#define CAN_RDT1R_TIME_Msk (0xFFFFU << CAN_RDT1R_TIME_Pos) /*!< 0xFFFF0000 */
-#define CAN_RDT1R_TIME CAN_RDT1R_TIME_Msk /*!< Message Time Stamp */
-
-/******************* Bit definition for CAN_RDL1R register ******************/
-#define CAN_RDL1R_DATA0_Pos (0U)
-#define CAN_RDL1R_DATA0_Msk (0xFFU << CAN_RDL1R_DATA0_Pos) /*!< 0x000000FF */
-#define CAN_RDL1R_DATA0 CAN_RDL1R_DATA0_Msk /*!< Data byte 0 */
-#define CAN_RDL1R_DATA1_Pos (8U)
-#define CAN_RDL1R_DATA1_Msk (0xFFU << CAN_RDL1R_DATA1_Pos) /*!< 0x0000FF00 */
-#define CAN_RDL1R_DATA1 CAN_RDL1R_DATA1_Msk /*!< Data byte 1 */
-#define CAN_RDL1R_DATA2_Pos (16U)
-#define CAN_RDL1R_DATA2_Msk (0xFFU << CAN_RDL1R_DATA2_Pos) /*!< 0x00FF0000 */
-#define CAN_RDL1R_DATA2 CAN_RDL1R_DATA2_Msk /*!< Data byte 2 */
-#define CAN_RDL1R_DATA3_Pos (24U)
-#define CAN_RDL1R_DATA3_Msk (0xFFU << CAN_RDL1R_DATA3_Pos) /*!< 0xFF000000 */
-#define CAN_RDL1R_DATA3 CAN_RDL1R_DATA3_Msk /*!< Data byte 3 */
-
-/******************* Bit definition for CAN_RDH1R register ******************/
-#define CAN_RDH1R_DATA4_Pos (0U)
-#define CAN_RDH1R_DATA4_Msk (0xFFU << CAN_RDH1R_DATA4_Pos) /*!< 0x000000FF */
-#define CAN_RDH1R_DATA4 CAN_RDH1R_DATA4_Msk /*!< Data byte 4 */
-#define CAN_RDH1R_DATA5_Pos (8U)
-#define CAN_RDH1R_DATA5_Msk (0xFFU << CAN_RDH1R_DATA5_Pos) /*!< 0x0000FF00 */
-#define CAN_RDH1R_DATA5 CAN_RDH1R_DATA5_Msk /*!< Data byte 5 */
-#define CAN_RDH1R_DATA6_Pos (16U)
-#define CAN_RDH1R_DATA6_Msk (0xFFU << CAN_RDH1R_DATA6_Pos) /*!< 0x00FF0000 */
-#define CAN_RDH1R_DATA6 CAN_RDH1R_DATA6_Msk /*!< Data byte 6 */
-#define CAN_RDH1R_DATA7_Pos (24U)
-#define CAN_RDH1R_DATA7_Msk (0xFFU << CAN_RDH1R_DATA7_Pos) /*!< 0xFF000000 */
-#define CAN_RDH1R_DATA7 CAN_RDH1R_DATA7_Msk /*!< Data byte 7 */
-
-/*!< CAN filter registers */
-/******************* Bit definition for CAN_FMR register ********************/
-#define CAN_FMR_FINIT_Pos (0U)
-#define CAN_FMR_FINIT_Msk (0x1U << CAN_FMR_FINIT_Pos) /*!< 0x00000001 */
-#define CAN_FMR_FINIT CAN_FMR_FINIT_Msk /*!< Filter Init Mode */
-#define CAN_FMR_CAN2SB_Pos (8U)
-#define CAN_FMR_CAN2SB_Msk (0x3FU << CAN_FMR_CAN2SB_Pos) /*!< 0x00003F00 */
-#define CAN_FMR_CAN2SB CAN_FMR_CAN2SB_Msk /*!< CAN2 start bank */
-
-/******************* Bit definition for CAN_FM1R register *******************/
-#define CAN_FM1R_FBM_Pos (0U)
-#define CAN_FM1R_FBM_Msk (0x3FFFU << CAN_FM1R_FBM_Pos) /*!< 0x00003FFF */
-#define CAN_FM1R_FBM CAN_FM1R_FBM_Msk /*!< Filter Mode */
-#define CAN_FM1R_FBM0_Pos (0U)
-#define CAN_FM1R_FBM0_Msk (0x1U << CAN_FM1R_FBM0_Pos) /*!< 0x00000001 */
-#define CAN_FM1R_FBM0 CAN_FM1R_FBM0_Msk /*!< Filter Init Mode for filter 0 */
-#define CAN_FM1R_FBM1_Pos (1U)
-#define CAN_FM1R_FBM1_Msk (0x1U << CAN_FM1R_FBM1_Pos) /*!< 0x00000002 */
-#define CAN_FM1R_FBM1 CAN_FM1R_FBM1_Msk /*!< Filter Init Mode for filter 1 */
-#define CAN_FM1R_FBM2_Pos (2U)
-#define CAN_FM1R_FBM2_Msk (0x1U << CAN_FM1R_FBM2_Pos) /*!< 0x00000004 */
-#define CAN_FM1R_FBM2 CAN_FM1R_FBM2_Msk /*!< Filter Init Mode for filter 2 */
-#define CAN_FM1R_FBM3_Pos (3U)
-#define CAN_FM1R_FBM3_Msk (0x1U << CAN_FM1R_FBM3_Pos) /*!< 0x00000008 */
-#define CAN_FM1R_FBM3 CAN_FM1R_FBM3_Msk /*!< Filter Init Mode for filter 3 */
-#define CAN_FM1R_FBM4_Pos (4U)
-#define CAN_FM1R_FBM4_Msk (0x1U << CAN_FM1R_FBM4_Pos) /*!< 0x00000010 */
-#define CAN_FM1R_FBM4 CAN_FM1R_FBM4_Msk /*!< Filter Init Mode for filter 4 */
-#define CAN_FM1R_FBM5_Pos (5U)
-#define CAN_FM1R_FBM5_Msk (0x1U << CAN_FM1R_FBM5_Pos) /*!< 0x00000020 */
-#define CAN_FM1R_FBM5 CAN_FM1R_FBM5_Msk /*!< Filter Init Mode for filter 5 */
-#define CAN_FM1R_FBM6_Pos (6U)
-#define CAN_FM1R_FBM6_Msk (0x1U << CAN_FM1R_FBM6_Pos) /*!< 0x00000040 */
-#define CAN_FM1R_FBM6 CAN_FM1R_FBM6_Msk /*!< Filter Init Mode for filter 6 */
-#define CAN_FM1R_FBM7_Pos (7U)
-#define CAN_FM1R_FBM7_Msk (0x1U << CAN_FM1R_FBM7_Pos) /*!< 0x00000080 */
-#define CAN_FM1R_FBM7 CAN_FM1R_FBM7_Msk /*!< Filter Init Mode for filter 7 */
-#define CAN_FM1R_FBM8_Pos (8U)
-#define CAN_FM1R_FBM8_Msk (0x1U << CAN_FM1R_FBM8_Pos) /*!< 0x00000100 */
-#define CAN_FM1R_FBM8 CAN_FM1R_FBM8_Msk /*!< Filter Init Mode for filter 8 */
-#define CAN_FM1R_FBM9_Pos (9U)
-#define CAN_FM1R_FBM9_Msk (0x1U << CAN_FM1R_FBM9_Pos) /*!< 0x00000200 */
-#define CAN_FM1R_FBM9 CAN_FM1R_FBM9_Msk /*!< Filter Init Mode for filter 9 */
-#define CAN_FM1R_FBM10_Pos (10U)
-#define CAN_FM1R_FBM10_Msk (0x1U << CAN_FM1R_FBM10_Pos) /*!< 0x00000400 */
-#define CAN_FM1R_FBM10 CAN_FM1R_FBM10_Msk /*!< Filter Init Mode for filter 10 */
-#define CAN_FM1R_FBM11_Pos (11U)
-#define CAN_FM1R_FBM11_Msk (0x1U << CAN_FM1R_FBM11_Pos) /*!< 0x00000800 */
-#define CAN_FM1R_FBM11 CAN_FM1R_FBM11_Msk /*!< Filter Init Mode for filter 11 */
-#define CAN_FM1R_FBM12_Pos (12U)
-#define CAN_FM1R_FBM12_Msk (0x1U << CAN_FM1R_FBM12_Pos) /*!< 0x00001000 */
-#define CAN_FM1R_FBM12 CAN_FM1R_FBM12_Msk /*!< Filter Init Mode for filter 12 */
-#define CAN_FM1R_FBM13_Pos (13U)
-#define CAN_FM1R_FBM13_Msk (0x1U << CAN_FM1R_FBM13_Pos) /*!< 0x00002000 */
-#define CAN_FM1R_FBM13 CAN_FM1R_FBM13_Msk /*!< Filter Init Mode for filter 13 */
-
-/******************* Bit definition for CAN_FS1R register *******************/
-#define CAN_FS1R_FSC_Pos (0U)
-#define CAN_FS1R_FSC_Msk (0x3FFFU << CAN_FS1R_FSC_Pos) /*!< 0x00003FFF */
-#define CAN_FS1R_FSC CAN_FS1R_FSC_Msk /*!< Filter Scale Configuration */
-#define CAN_FS1R_FSC0_Pos (0U)
-#define CAN_FS1R_FSC0_Msk (0x1U << CAN_FS1R_FSC0_Pos) /*!< 0x00000001 */
-#define CAN_FS1R_FSC0 CAN_FS1R_FSC0_Msk /*!< Filter Scale Configuration for filter 0 */
-#define CAN_FS1R_FSC1_Pos (1U)
-#define CAN_FS1R_FSC1_Msk (0x1U << CAN_FS1R_FSC1_Pos) /*!< 0x00000002 */
-#define CAN_FS1R_FSC1 CAN_FS1R_FSC1_Msk /*!< Filter Scale Configuration for filter 1 */
-#define CAN_FS1R_FSC2_Pos (2U)
-#define CAN_FS1R_FSC2_Msk (0x1U << CAN_FS1R_FSC2_Pos) /*!< 0x00000004 */
-#define CAN_FS1R_FSC2 CAN_FS1R_FSC2_Msk /*!< Filter Scale Configuration for filter 2 */
-#define CAN_FS1R_FSC3_Pos (3U)
-#define CAN_FS1R_FSC3_Msk (0x1U << CAN_FS1R_FSC3_Pos) /*!< 0x00000008 */
-#define CAN_FS1R_FSC3 CAN_FS1R_FSC3_Msk /*!< Filter Scale Configuration for filter 3 */
-#define CAN_FS1R_FSC4_Pos (4U)
-#define CAN_FS1R_FSC4_Msk (0x1U << CAN_FS1R_FSC4_Pos) /*!< 0x00000010 */
-#define CAN_FS1R_FSC4 CAN_FS1R_FSC4_Msk /*!< Filter Scale Configuration for filter 4 */
-#define CAN_FS1R_FSC5_Pos (5U)
-#define CAN_FS1R_FSC5_Msk (0x1U << CAN_FS1R_FSC5_Pos) /*!< 0x00000020 */
-#define CAN_FS1R_FSC5 CAN_FS1R_FSC5_Msk /*!< Filter Scale Configuration for filter 5 */
-#define CAN_FS1R_FSC6_Pos (6U)
-#define CAN_FS1R_FSC6_Msk (0x1U << CAN_FS1R_FSC6_Pos) /*!< 0x00000040 */
-#define CAN_FS1R_FSC6 CAN_FS1R_FSC6_Msk /*!< Filter Scale Configuration for filter 6 */
-#define CAN_FS1R_FSC7_Pos (7U)
-#define CAN_FS1R_FSC7_Msk (0x1U << CAN_FS1R_FSC7_Pos) /*!< 0x00000080 */
-#define CAN_FS1R_FSC7 CAN_FS1R_FSC7_Msk /*!< Filter Scale Configuration for filter 7 */
-#define CAN_FS1R_FSC8_Pos (8U)
-#define CAN_FS1R_FSC8_Msk (0x1U << CAN_FS1R_FSC8_Pos) /*!< 0x00000100 */
-#define CAN_FS1R_FSC8 CAN_FS1R_FSC8_Msk /*!< Filter Scale Configuration for filter 8 */
-#define CAN_FS1R_FSC9_Pos (9U)
-#define CAN_FS1R_FSC9_Msk (0x1U << CAN_FS1R_FSC9_Pos) /*!< 0x00000200 */
-#define CAN_FS1R_FSC9 CAN_FS1R_FSC9_Msk /*!< Filter Scale Configuration for filter 9 */
-#define CAN_FS1R_FSC10_Pos (10U)
-#define CAN_FS1R_FSC10_Msk (0x1U << CAN_FS1R_FSC10_Pos) /*!< 0x00000400 */
-#define CAN_FS1R_FSC10 CAN_FS1R_FSC10_Msk /*!< Filter Scale Configuration for filter 10 */
-#define CAN_FS1R_FSC11_Pos (11U)
-#define CAN_FS1R_FSC11_Msk (0x1U << CAN_FS1R_FSC11_Pos) /*!< 0x00000800 */
-#define CAN_FS1R_FSC11 CAN_FS1R_FSC11_Msk /*!< Filter Scale Configuration for filter 11 */
-#define CAN_FS1R_FSC12_Pos (12U)
-#define CAN_FS1R_FSC12_Msk (0x1U << CAN_FS1R_FSC12_Pos) /*!< 0x00001000 */
-#define CAN_FS1R_FSC12 CAN_FS1R_FSC12_Msk /*!< Filter Scale Configuration for filter 12 */
-#define CAN_FS1R_FSC13_Pos (13U)
-#define CAN_FS1R_FSC13_Msk (0x1U << CAN_FS1R_FSC13_Pos) /*!< 0x00002000 */
-#define CAN_FS1R_FSC13 CAN_FS1R_FSC13_Msk /*!< Filter Scale Configuration for filter 13 */
-
-/****************** Bit definition for CAN_FFA1R register *******************/
-#define CAN_FFA1R_FFA_Pos (0U)
-#define CAN_FFA1R_FFA_Msk (0x3FFFU << CAN_FFA1R_FFA_Pos) /*!< 0x00003FFF */
-#define CAN_FFA1R_FFA CAN_FFA1R_FFA_Msk /*!< Filter FIFO Assignment */
-#define CAN_FFA1R_FFA0_Pos (0U)
-#define CAN_FFA1R_FFA0_Msk (0x1U << CAN_FFA1R_FFA0_Pos) /*!< 0x00000001 */
-#define CAN_FFA1R_FFA0 CAN_FFA1R_FFA0_Msk /*!< Filter FIFO Assignment for filter 0 */
-#define CAN_FFA1R_FFA1_Pos (1U)
-#define CAN_FFA1R_FFA1_Msk (0x1U << CAN_FFA1R_FFA1_Pos) /*!< 0x00000002 */
-#define CAN_FFA1R_FFA1 CAN_FFA1R_FFA1_Msk /*!< Filter FIFO Assignment for filter 1 */
-#define CAN_FFA1R_FFA2_Pos (2U)
-#define CAN_FFA1R_FFA2_Msk (0x1U << CAN_FFA1R_FFA2_Pos) /*!< 0x00000004 */
-#define CAN_FFA1R_FFA2 CAN_FFA1R_FFA2_Msk /*!< Filter FIFO Assignment for filter 2 */
-#define CAN_FFA1R_FFA3_Pos (3U)
-#define CAN_FFA1R_FFA3_Msk (0x1U << CAN_FFA1R_FFA3_Pos) /*!< 0x00000008 */
-#define CAN_FFA1R_FFA3 CAN_FFA1R_FFA3_Msk /*!< Filter FIFO Assignment for filter 3 */
-#define CAN_FFA1R_FFA4_Pos (4U)
-#define CAN_FFA1R_FFA4_Msk (0x1U << CAN_FFA1R_FFA4_Pos) /*!< 0x00000010 */
-#define CAN_FFA1R_FFA4 CAN_FFA1R_FFA4_Msk /*!< Filter FIFO Assignment for filter 4 */
-#define CAN_FFA1R_FFA5_Pos (5U)
-#define CAN_FFA1R_FFA5_Msk (0x1U << CAN_FFA1R_FFA5_Pos) /*!< 0x00000020 */
-#define CAN_FFA1R_FFA5 CAN_FFA1R_FFA5_Msk /*!< Filter FIFO Assignment for filter 5 */
-#define CAN_FFA1R_FFA6_Pos (6U)
-#define CAN_FFA1R_FFA6_Msk (0x1U << CAN_FFA1R_FFA6_Pos) /*!< 0x00000040 */
-#define CAN_FFA1R_FFA6 CAN_FFA1R_FFA6_Msk /*!< Filter FIFO Assignment for filter 6 */
-#define CAN_FFA1R_FFA7_Pos (7U)
-#define CAN_FFA1R_FFA7_Msk (0x1U << CAN_FFA1R_FFA7_Pos) /*!< 0x00000080 */
-#define CAN_FFA1R_FFA7 CAN_FFA1R_FFA7_Msk /*!< Filter FIFO Assignment for filter 7 */
-#define CAN_FFA1R_FFA8_Pos (8U)
-#define CAN_FFA1R_FFA8_Msk (0x1U << CAN_FFA1R_FFA8_Pos) /*!< 0x00000100 */
-#define CAN_FFA1R_FFA8 CAN_FFA1R_FFA8_Msk /*!< Filter FIFO Assignment for filter 8 */
-#define CAN_FFA1R_FFA9_Pos (9U)
-#define CAN_FFA1R_FFA9_Msk (0x1U << CAN_FFA1R_FFA9_Pos) /*!< 0x00000200 */
-#define CAN_FFA1R_FFA9 CAN_FFA1R_FFA9_Msk /*!< Filter FIFO Assignment for filter 9 */
-#define CAN_FFA1R_FFA10_Pos (10U)
-#define CAN_FFA1R_FFA10_Msk (0x1U << CAN_FFA1R_FFA10_Pos) /*!< 0x00000400 */
-#define CAN_FFA1R_FFA10 CAN_FFA1R_FFA10_Msk /*!< Filter FIFO Assignment for filter 10 */
-#define CAN_FFA1R_FFA11_Pos (11U)
-#define CAN_FFA1R_FFA11_Msk (0x1U << CAN_FFA1R_FFA11_Pos) /*!< 0x00000800 */
-#define CAN_FFA1R_FFA11 CAN_FFA1R_FFA11_Msk /*!< Filter FIFO Assignment for filter 11 */
-#define CAN_FFA1R_FFA12_Pos (12U)
-#define CAN_FFA1R_FFA12_Msk (0x1U << CAN_FFA1R_FFA12_Pos) /*!< 0x00001000 */
-#define CAN_FFA1R_FFA12 CAN_FFA1R_FFA12_Msk /*!< Filter FIFO Assignment for filter 12 */
-#define CAN_FFA1R_FFA13_Pos (13U)
-#define CAN_FFA1R_FFA13_Msk (0x1U << CAN_FFA1R_FFA13_Pos) /*!< 0x00002000 */
-#define CAN_FFA1R_FFA13 CAN_FFA1R_FFA13_Msk /*!< Filter FIFO Assignment for filter 13 */
-
-/******************* Bit definition for CAN_FA1R register *******************/
-#define CAN_FA1R_FACT_Pos (0U)
-#define CAN_FA1R_FACT_Msk (0x3FFFU << CAN_FA1R_FACT_Pos) /*!< 0x00003FFF */
-#define CAN_FA1R_FACT CAN_FA1R_FACT_Msk /*!< Filter Active */
-#define CAN_FA1R_FACT0_Pos (0U)
-#define CAN_FA1R_FACT0_Msk (0x1U << CAN_FA1R_FACT0_Pos) /*!< 0x00000001 */
-#define CAN_FA1R_FACT0 CAN_FA1R_FACT0_Msk /*!< Filter 0 Active */
-#define CAN_FA1R_FACT1_Pos (1U)
-#define CAN_FA1R_FACT1_Msk (0x1U << CAN_FA1R_FACT1_Pos) /*!< 0x00000002 */
-#define CAN_FA1R_FACT1 CAN_FA1R_FACT1_Msk /*!< Filter 1 Active */
-#define CAN_FA1R_FACT2_Pos (2U)
-#define CAN_FA1R_FACT2_Msk (0x1U << CAN_FA1R_FACT2_Pos) /*!< 0x00000004 */
-#define CAN_FA1R_FACT2 CAN_FA1R_FACT2_Msk /*!< Filter 2 Active */
-#define CAN_FA1R_FACT3_Pos (3U)
-#define CAN_FA1R_FACT3_Msk (0x1U << CAN_FA1R_FACT3_Pos) /*!< 0x00000008 */
-#define CAN_FA1R_FACT3 CAN_FA1R_FACT3_Msk /*!< Filter 3 Active */
-#define CAN_FA1R_FACT4_Pos (4U)
-#define CAN_FA1R_FACT4_Msk (0x1U << CAN_FA1R_FACT4_Pos) /*!< 0x00000010 */
-#define CAN_FA1R_FACT4 CAN_FA1R_FACT4_Msk /*!< Filter 4 Active */
-#define CAN_FA1R_FACT5_Pos (5U)
-#define CAN_FA1R_FACT5_Msk (0x1U << CAN_FA1R_FACT5_Pos) /*!< 0x00000020 */
-#define CAN_FA1R_FACT5 CAN_FA1R_FACT5_Msk /*!< Filter 5 Active */
-#define CAN_FA1R_FACT6_Pos (6U)
-#define CAN_FA1R_FACT6_Msk (0x1U << CAN_FA1R_FACT6_Pos) /*!< 0x00000040 */
-#define CAN_FA1R_FACT6 CAN_FA1R_FACT6_Msk /*!< Filter 6 Active */
-#define CAN_FA1R_FACT7_Pos (7U)
-#define CAN_FA1R_FACT7_Msk (0x1U << CAN_FA1R_FACT7_Pos) /*!< 0x00000080 */
-#define CAN_FA1R_FACT7 CAN_FA1R_FACT7_Msk /*!< Filter 7 Active */
-#define CAN_FA1R_FACT8_Pos (8U)
-#define CAN_FA1R_FACT8_Msk (0x1U << CAN_FA1R_FACT8_Pos) /*!< 0x00000100 */
-#define CAN_FA1R_FACT8 CAN_FA1R_FACT8_Msk /*!< Filter 8 Active */
-#define CAN_FA1R_FACT9_Pos (9U)
-#define CAN_FA1R_FACT9_Msk (0x1U << CAN_FA1R_FACT9_Pos) /*!< 0x00000200 */
-#define CAN_FA1R_FACT9 CAN_FA1R_FACT9_Msk /*!< Filter 9 Active */
-#define CAN_FA1R_FACT10_Pos (10U)
-#define CAN_FA1R_FACT10_Msk (0x1U << CAN_FA1R_FACT10_Pos) /*!< 0x00000400 */
-#define CAN_FA1R_FACT10 CAN_FA1R_FACT10_Msk /*!< Filter 10 Active */
-#define CAN_FA1R_FACT11_Pos (11U)
-#define CAN_FA1R_FACT11_Msk (0x1U << CAN_FA1R_FACT11_Pos) /*!< 0x00000800 */
-#define CAN_FA1R_FACT11 CAN_FA1R_FACT11_Msk /*!< Filter 11 Active */
-#define CAN_FA1R_FACT12_Pos (12U)
-#define CAN_FA1R_FACT12_Msk (0x1U << CAN_FA1R_FACT12_Pos) /*!< 0x00001000 */
-#define CAN_FA1R_FACT12 CAN_FA1R_FACT12_Msk /*!< Filter 12 Active */
-#define CAN_FA1R_FACT13_Pos (13U)
-#define CAN_FA1R_FACT13_Msk (0x1U << CAN_FA1R_FACT13_Pos) /*!< 0x00002000 */
-#define CAN_FA1R_FACT13 CAN_FA1R_FACT13_Msk /*!< Filter 13 Active */
-
-/******************* Bit definition for CAN_F0R1 register *******************/
-#define CAN_F0R1_FB0_Pos (0U)
-#define CAN_F0R1_FB0_Msk (0x1U << CAN_F0R1_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F0R1_FB0 CAN_F0R1_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F0R1_FB1_Pos (1U)
-#define CAN_F0R1_FB1_Msk (0x1U << CAN_F0R1_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F0R1_FB1 CAN_F0R1_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F0R1_FB2_Pos (2U)
-#define CAN_F0R1_FB2_Msk (0x1U << CAN_F0R1_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F0R1_FB2 CAN_F0R1_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F0R1_FB3_Pos (3U)
-#define CAN_F0R1_FB3_Msk (0x1U << CAN_F0R1_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F0R1_FB3 CAN_F0R1_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F0R1_FB4_Pos (4U)
-#define CAN_F0R1_FB4_Msk (0x1U << CAN_F0R1_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F0R1_FB4 CAN_F0R1_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F0R1_FB5_Pos (5U)
-#define CAN_F0R1_FB5_Msk (0x1U << CAN_F0R1_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F0R1_FB5 CAN_F0R1_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F0R1_FB6_Pos (6U)
-#define CAN_F0R1_FB6_Msk (0x1U << CAN_F0R1_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F0R1_FB6 CAN_F0R1_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F0R1_FB7_Pos (7U)
-#define CAN_F0R1_FB7_Msk (0x1U << CAN_F0R1_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F0R1_FB7 CAN_F0R1_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F0R1_FB8_Pos (8U)
-#define CAN_F0R1_FB8_Msk (0x1U << CAN_F0R1_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F0R1_FB8 CAN_F0R1_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F0R1_FB9_Pos (9U)
-#define CAN_F0R1_FB9_Msk (0x1U << CAN_F0R1_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F0R1_FB9 CAN_F0R1_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F0R1_FB10_Pos (10U)
-#define CAN_F0R1_FB10_Msk (0x1U << CAN_F0R1_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F0R1_FB10 CAN_F0R1_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F0R1_FB11_Pos (11U)
-#define CAN_F0R1_FB11_Msk (0x1U << CAN_F0R1_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F0R1_FB11 CAN_F0R1_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F0R1_FB12_Pos (12U)
-#define CAN_F0R1_FB12_Msk (0x1U << CAN_F0R1_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F0R1_FB12 CAN_F0R1_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F0R1_FB13_Pos (13U)
-#define CAN_F0R1_FB13_Msk (0x1U << CAN_F0R1_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F0R1_FB13 CAN_F0R1_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F0R1_FB14_Pos (14U)
-#define CAN_F0R1_FB14_Msk (0x1U << CAN_F0R1_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F0R1_FB14 CAN_F0R1_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F0R1_FB15_Pos (15U)
-#define CAN_F0R1_FB15_Msk (0x1U << CAN_F0R1_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F0R1_FB15 CAN_F0R1_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F0R1_FB16_Pos (16U)
-#define CAN_F0R1_FB16_Msk (0x1U << CAN_F0R1_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F0R1_FB16 CAN_F0R1_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F0R1_FB17_Pos (17U)
-#define CAN_F0R1_FB17_Msk (0x1U << CAN_F0R1_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F0R1_FB17 CAN_F0R1_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F0R1_FB18_Pos (18U)
-#define CAN_F0R1_FB18_Msk (0x1U << CAN_F0R1_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F0R1_FB18 CAN_F0R1_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F0R1_FB19_Pos (19U)
-#define CAN_F0R1_FB19_Msk (0x1U << CAN_F0R1_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F0R1_FB19 CAN_F0R1_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F0R1_FB20_Pos (20U)
-#define CAN_F0R1_FB20_Msk (0x1U << CAN_F0R1_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F0R1_FB20 CAN_F0R1_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F0R1_FB21_Pos (21U)
-#define CAN_F0R1_FB21_Msk (0x1U << CAN_F0R1_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F0R1_FB21 CAN_F0R1_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F0R1_FB22_Pos (22U)
-#define CAN_F0R1_FB22_Msk (0x1U << CAN_F0R1_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F0R1_FB22 CAN_F0R1_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F0R1_FB23_Pos (23U)
-#define CAN_F0R1_FB23_Msk (0x1U << CAN_F0R1_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F0R1_FB23 CAN_F0R1_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F0R1_FB24_Pos (24U)
-#define CAN_F0R1_FB24_Msk (0x1U << CAN_F0R1_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F0R1_FB24 CAN_F0R1_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F0R1_FB25_Pos (25U)
-#define CAN_F0R1_FB25_Msk (0x1U << CAN_F0R1_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F0R1_FB25 CAN_F0R1_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F0R1_FB26_Pos (26U)
-#define CAN_F0R1_FB26_Msk (0x1U << CAN_F0R1_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F0R1_FB26 CAN_F0R1_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F0R1_FB27_Pos (27U)
-#define CAN_F0R1_FB27_Msk (0x1U << CAN_F0R1_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F0R1_FB27 CAN_F0R1_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F0R1_FB28_Pos (28U)
-#define CAN_F0R1_FB28_Msk (0x1U << CAN_F0R1_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F0R1_FB28 CAN_F0R1_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F0R1_FB29_Pos (29U)
-#define CAN_F0R1_FB29_Msk (0x1U << CAN_F0R1_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F0R1_FB29 CAN_F0R1_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F0R1_FB30_Pos (30U)
-#define CAN_F0R1_FB30_Msk (0x1U << CAN_F0R1_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F0R1_FB30 CAN_F0R1_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F0R1_FB31_Pos (31U)
-#define CAN_F0R1_FB31_Msk (0x1U << CAN_F0R1_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F0R1_FB31 CAN_F0R1_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F1R1 register *******************/
-#define CAN_F1R1_FB0_Pos (0U)
-#define CAN_F1R1_FB0_Msk (0x1U << CAN_F1R1_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F1R1_FB0 CAN_F1R1_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F1R1_FB1_Pos (1U)
-#define CAN_F1R1_FB1_Msk (0x1U << CAN_F1R1_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F1R1_FB1 CAN_F1R1_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F1R1_FB2_Pos (2U)
-#define CAN_F1R1_FB2_Msk (0x1U << CAN_F1R1_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F1R1_FB2 CAN_F1R1_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F1R1_FB3_Pos (3U)
-#define CAN_F1R1_FB3_Msk (0x1U << CAN_F1R1_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F1R1_FB3 CAN_F1R1_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F1R1_FB4_Pos (4U)
-#define CAN_F1R1_FB4_Msk (0x1U << CAN_F1R1_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F1R1_FB4 CAN_F1R1_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F1R1_FB5_Pos (5U)
-#define CAN_F1R1_FB5_Msk (0x1U << CAN_F1R1_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F1R1_FB5 CAN_F1R1_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F1R1_FB6_Pos (6U)
-#define CAN_F1R1_FB6_Msk (0x1U << CAN_F1R1_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F1R1_FB6 CAN_F1R1_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F1R1_FB7_Pos (7U)
-#define CAN_F1R1_FB7_Msk (0x1U << CAN_F1R1_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F1R1_FB7 CAN_F1R1_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F1R1_FB8_Pos (8U)
-#define CAN_F1R1_FB8_Msk (0x1U << CAN_F1R1_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F1R1_FB8 CAN_F1R1_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F1R1_FB9_Pos (9U)
-#define CAN_F1R1_FB9_Msk (0x1U << CAN_F1R1_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F1R1_FB9 CAN_F1R1_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F1R1_FB10_Pos (10U)
-#define CAN_F1R1_FB10_Msk (0x1U << CAN_F1R1_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F1R1_FB10 CAN_F1R1_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F1R1_FB11_Pos (11U)
-#define CAN_F1R1_FB11_Msk (0x1U << CAN_F1R1_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F1R1_FB11 CAN_F1R1_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F1R1_FB12_Pos (12U)
-#define CAN_F1R1_FB12_Msk (0x1U << CAN_F1R1_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F1R1_FB12 CAN_F1R1_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F1R1_FB13_Pos (13U)
-#define CAN_F1R1_FB13_Msk (0x1U << CAN_F1R1_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F1R1_FB13 CAN_F1R1_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F1R1_FB14_Pos (14U)
-#define CAN_F1R1_FB14_Msk (0x1U << CAN_F1R1_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F1R1_FB14 CAN_F1R1_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F1R1_FB15_Pos (15U)
-#define CAN_F1R1_FB15_Msk (0x1U << CAN_F1R1_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F1R1_FB15 CAN_F1R1_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F1R1_FB16_Pos (16U)
-#define CAN_F1R1_FB16_Msk (0x1U << CAN_F1R1_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F1R1_FB16 CAN_F1R1_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F1R1_FB17_Pos (17U)
-#define CAN_F1R1_FB17_Msk (0x1U << CAN_F1R1_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F1R1_FB17 CAN_F1R1_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F1R1_FB18_Pos (18U)
-#define CAN_F1R1_FB18_Msk (0x1U << CAN_F1R1_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F1R1_FB18 CAN_F1R1_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F1R1_FB19_Pos (19U)
-#define CAN_F1R1_FB19_Msk (0x1U << CAN_F1R1_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F1R1_FB19 CAN_F1R1_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F1R1_FB20_Pos (20U)
-#define CAN_F1R1_FB20_Msk (0x1U << CAN_F1R1_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F1R1_FB20 CAN_F1R1_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F1R1_FB21_Pos (21U)
-#define CAN_F1R1_FB21_Msk (0x1U << CAN_F1R1_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F1R1_FB21 CAN_F1R1_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F1R1_FB22_Pos (22U)
-#define CAN_F1R1_FB22_Msk (0x1U << CAN_F1R1_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F1R1_FB22 CAN_F1R1_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F1R1_FB23_Pos (23U)
-#define CAN_F1R1_FB23_Msk (0x1U << CAN_F1R1_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F1R1_FB23 CAN_F1R1_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F1R1_FB24_Pos (24U)
-#define CAN_F1R1_FB24_Msk (0x1U << CAN_F1R1_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F1R1_FB24 CAN_F1R1_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F1R1_FB25_Pos (25U)
-#define CAN_F1R1_FB25_Msk (0x1U << CAN_F1R1_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F1R1_FB25 CAN_F1R1_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F1R1_FB26_Pos (26U)
-#define CAN_F1R1_FB26_Msk (0x1U << CAN_F1R1_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F1R1_FB26 CAN_F1R1_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F1R1_FB27_Pos (27U)
-#define CAN_F1R1_FB27_Msk (0x1U << CAN_F1R1_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F1R1_FB27 CAN_F1R1_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F1R1_FB28_Pos (28U)
-#define CAN_F1R1_FB28_Msk (0x1U << CAN_F1R1_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F1R1_FB28 CAN_F1R1_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F1R1_FB29_Pos (29U)
-#define CAN_F1R1_FB29_Msk (0x1U << CAN_F1R1_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F1R1_FB29 CAN_F1R1_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F1R1_FB30_Pos (30U)
-#define CAN_F1R1_FB30_Msk (0x1U << CAN_F1R1_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F1R1_FB30 CAN_F1R1_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F1R1_FB31_Pos (31U)
-#define CAN_F1R1_FB31_Msk (0x1U << CAN_F1R1_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F1R1_FB31 CAN_F1R1_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F2R1 register *******************/
-#define CAN_F2R1_FB0_Pos (0U)
-#define CAN_F2R1_FB0_Msk (0x1U << CAN_F2R1_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F2R1_FB0 CAN_F2R1_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F2R1_FB1_Pos (1U)
-#define CAN_F2R1_FB1_Msk (0x1U << CAN_F2R1_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F2R1_FB1 CAN_F2R1_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F2R1_FB2_Pos (2U)
-#define CAN_F2R1_FB2_Msk (0x1U << CAN_F2R1_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F2R1_FB2 CAN_F2R1_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F2R1_FB3_Pos (3U)
-#define CAN_F2R1_FB3_Msk (0x1U << CAN_F2R1_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F2R1_FB3 CAN_F2R1_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F2R1_FB4_Pos (4U)
-#define CAN_F2R1_FB4_Msk (0x1U << CAN_F2R1_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F2R1_FB4 CAN_F2R1_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F2R1_FB5_Pos (5U)
-#define CAN_F2R1_FB5_Msk (0x1U << CAN_F2R1_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F2R1_FB5 CAN_F2R1_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F2R1_FB6_Pos (6U)
-#define CAN_F2R1_FB6_Msk (0x1U << CAN_F2R1_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F2R1_FB6 CAN_F2R1_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F2R1_FB7_Pos (7U)
-#define CAN_F2R1_FB7_Msk (0x1U << CAN_F2R1_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F2R1_FB7 CAN_F2R1_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F2R1_FB8_Pos (8U)
-#define CAN_F2R1_FB8_Msk (0x1U << CAN_F2R1_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F2R1_FB8 CAN_F2R1_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F2R1_FB9_Pos (9U)
-#define CAN_F2R1_FB9_Msk (0x1U << CAN_F2R1_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F2R1_FB9 CAN_F2R1_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F2R1_FB10_Pos (10U)
-#define CAN_F2R1_FB10_Msk (0x1U << CAN_F2R1_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F2R1_FB10 CAN_F2R1_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F2R1_FB11_Pos (11U)
-#define CAN_F2R1_FB11_Msk (0x1U << CAN_F2R1_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F2R1_FB11 CAN_F2R1_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F2R1_FB12_Pos (12U)
-#define CAN_F2R1_FB12_Msk (0x1U << CAN_F2R1_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F2R1_FB12 CAN_F2R1_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F2R1_FB13_Pos (13U)
-#define CAN_F2R1_FB13_Msk (0x1U << CAN_F2R1_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F2R1_FB13 CAN_F2R1_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F2R1_FB14_Pos (14U)
-#define CAN_F2R1_FB14_Msk (0x1U << CAN_F2R1_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F2R1_FB14 CAN_F2R1_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F2R1_FB15_Pos (15U)
-#define CAN_F2R1_FB15_Msk (0x1U << CAN_F2R1_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F2R1_FB15 CAN_F2R1_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F2R1_FB16_Pos (16U)
-#define CAN_F2R1_FB16_Msk (0x1U << CAN_F2R1_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F2R1_FB16 CAN_F2R1_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F2R1_FB17_Pos (17U)
-#define CAN_F2R1_FB17_Msk (0x1U << CAN_F2R1_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F2R1_FB17 CAN_F2R1_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F2R1_FB18_Pos (18U)
-#define CAN_F2R1_FB18_Msk (0x1U << CAN_F2R1_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F2R1_FB18 CAN_F2R1_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F2R1_FB19_Pos (19U)
-#define CAN_F2R1_FB19_Msk (0x1U << CAN_F2R1_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F2R1_FB19 CAN_F2R1_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F2R1_FB20_Pos (20U)
-#define CAN_F2R1_FB20_Msk (0x1U << CAN_F2R1_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F2R1_FB20 CAN_F2R1_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F2R1_FB21_Pos (21U)
-#define CAN_F2R1_FB21_Msk (0x1U << CAN_F2R1_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F2R1_FB21 CAN_F2R1_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F2R1_FB22_Pos (22U)
-#define CAN_F2R1_FB22_Msk (0x1U << CAN_F2R1_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F2R1_FB22 CAN_F2R1_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F2R1_FB23_Pos (23U)
-#define CAN_F2R1_FB23_Msk (0x1U << CAN_F2R1_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F2R1_FB23 CAN_F2R1_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F2R1_FB24_Pos (24U)
-#define CAN_F2R1_FB24_Msk (0x1U << CAN_F2R1_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F2R1_FB24 CAN_F2R1_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F2R1_FB25_Pos (25U)
-#define CAN_F2R1_FB25_Msk (0x1U << CAN_F2R1_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F2R1_FB25 CAN_F2R1_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F2R1_FB26_Pos (26U)
-#define CAN_F2R1_FB26_Msk (0x1U << CAN_F2R1_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F2R1_FB26 CAN_F2R1_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F2R1_FB27_Pos (27U)
-#define CAN_F2R1_FB27_Msk (0x1U << CAN_F2R1_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F2R1_FB27 CAN_F2R1_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F2R1_FB28_Pos (28U)
-#define CAN_F2R1_FB28_Msk (0x1U << CAN_F2R1_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F2R1_FB28 CAN_F2R1_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F2R1_FB29_Pos (29U)
-#define CAN_F2R1_FB29_Msk (0x1U << CAN_F2R1_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F2R1_FB29 CAN_F2R1_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F2R1_FB30_Pos (30U)
-#define CAN_F2R1_FB30_Msk (0x1U << CAN_F2R1_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F2R1_FB30 CAN_F2R1_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F2R1_FB31_Pos (31U)
-#define CAN_F2R1_FB31_Msk (0x1U << CAN_F2R1_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F2R1_FB31 CAN_F2R1_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F3R1 register *******************/
-#define CAN_F3R1_FB0_Pos (0U)
-#define CAN_F3R1_FB0_Msk (0x1U << CAN_F3R1_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F3R1_FB0 CAN_F3R1_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F3R1_FB1_Pos (1U)
-#define CAN_F3R1_FB1_Msk (0x1U << CAN_F3R1_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F3R1_FB1 CAN_F3R1_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F3R1_FB2_Pos (2U)
-#define CAN_F3R1_FB2_Msk (0x1U << CAN_F3R1_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F3R1_FB2 CAN_F3R1_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F3R1_FB3_Pos (3U)
-#define CAN_F3R1_FB3_Msk (0x1U << CAN_F3R1_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F3R1_FB3 CAN_F3R1_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F3R1_FB4_Pos (4U)
-#define CAN_F3R1_FB4_Msk (0x1U << CAN_F3R1_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F3R1_FB4 CAN_F3R1_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F3R1_FB5_Pos (5U)
-#define CAN_F3R1_FB5_Msk (0x1U << CAN_F3R1_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F3R1_FB5 CAN_F3R1_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F3R1_FB6_Pos (6U)
-#define CAN_F3R1_FB6_Msk (0x1U << CAN_F3R1_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F3R1_FB6 CAN_F3R1_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F3R1_FB7_Pos (7U)
-#define CAN_F3R1_FB7_Msk (0x1U << CAN_F3R1_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F3R1_FB7 CAN_F3R1_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F3R1_FB8_Pos (8U)
-#define CAN_F3R1_FB8_Msk (0x1U << CAN_F3R1_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F3R1_FB8 CAN_F3R1_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F3R1_FB9_Pos (9U)
-#define CAN_F3R1_FB9_Msk (0x1U << CAN_F3R1_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F3R1_FB9 CAN_F3R1_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F3R1_FB10_Pos (10U)
-#define CAN_F3R1_FB10_Msk (0x1U << CAN_F3R1_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F3R1_FB10 CAN_F3R1_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F3R1_FB11_Pos (11U)
-#define CAN_F3R1_FB11_Msk (0x1U << CAN_F3R1_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F3R1_FB11 CAN_F3R1_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F3R1_FB12_Pos (12U)
-#define CAN_F3R1_FB12_Msk (0x1U << CAN_F3R1_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F3R1_FB12 CAN_F3R1_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F3R1_FB13_Pos (13U)
-#define CAN_F3R1_FB13_Msk (0x1U << CAN_F3R1_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F3R1_FB13 CAN_F3R1_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F3R1_FB14_Pos (14U)
-#define CAN_F3R1_FB14_Msk (0x1U << CAN_F3R1_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F3R1_FB14 CAN_F3R1_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F3R1_FB15_Pos (15U)
-#define CAN_F3R1_FB15_Msk (0x1U << CAN_F3R1_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F3R1_FB15 CAN_F3R1_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F3R1_FB16_Pos (16U)
-#define CAN_F3R1_FB16_Msk (0x1U << CAN_F3R1_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F3R1_FB16 CAN_F3R1_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F3R1_FB17_Pos (17U)
-#define CAN_F3R1_FB17_Msk (0x1U << CAN_F3R1_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F3R1_FB17 CAN_F3R1_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F3R1_FB18_Pos (18U)
-#define CAN_F3R1_FB18_Msk (0x1U << CAN_F3R1_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F3R1_FB18 CAN_F3R1_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F3R1_FB19_Pos (19U)
-#define CAN_F3R1_FB19_Msk (0x1U << CAN_F3R1_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F3R1_FB19 CAN_F3R1_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F3R1_FB20_Pos (20U)
-#define CAN_F3R1_FB20_Msk (0x1U << CAN_F3R1_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F3R1_FB20 CAN_F3R1_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F3R1_FB21_Pos (21U)
-#define CAN_F3R1_FB21_Msk (0x1U << CAN_F3R1_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F3R1_FB21 CAN_F3R1_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F3R1_FB22_Pos (22U)
-#define CAN_F3R1_FB22_Msk (0x1U << CAN_F3R1_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F3R1_FB22 CAN_F3R1_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F3R1_FB23_Pos (23U)
-#define CAN_F3R1_FB23_Msk (0x1U << CAN_F3R1_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F3R1_FB23 CAN_F3R1_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F3R1_FB24_Pos (24U)
-#define CAN_F3R1_FB24_Msk (0x1U << CAN_F3R1_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F3R1_FB24 CAN_F3R1_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F3R1_FB25_Pos (25U)
-#define CAN_F3R1_FB25_Msk (0x1U << CAN_F3R1_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F3R1_FB25 CAN_F3R1_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F3R1_FB26_Pos (26U)
-#define CAN_F3R1_FB26_Msk (0x1U << CAN_F3R1_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F3R1_FB26 CAN_F3R1_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F3R1_FB27_Pos (27U)
-#define CAN_F3R1_FB27_Msk (0x1U << CAN_F3R1_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F3R1_FB27 CAN_F3R1_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F3R1_FB28_Pos (28U)
-#define CAN_F3R1_FB28_Msk (0x1U << CAN_F3R1_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F3R1_FB28 CAN_F3R1_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F3R1_FB29_Pos (29U)
-#define CAN_F3R1_FB29_Msk (0x1U << CAN_F3R1_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F3R1_FB29 CAN_F3R1_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F3R1_FB30_Pos (30U)
-#define CAN_F3R1_FB30_Msk (0x1U << CAN_F3R1_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F3R1_FB30 CAN_F3R1_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F3R1_FB31_Pos (31U)
-#define CAN_F3R1_FB31_Msk (0x1U << CAN_F3R1_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F3R1_FB31 CAN_F3R1_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F4R1 register *******************/
-#define CAN_F4R1_FB0_Pos (0U)
-#define CAN_F4R1_FB0_Msk (0x1U << CAN_F4R1_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F4R1_FB0 CAN_F4R1_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F4R1_FB1_Pos (1U)
-#define CAN_F4R1_FB1_Msk (0x1U << CAN_F4R1_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F4R1_FB1 CAN_F4R1_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F4R1_FB2_Pos (2U)
-#define CAN_F4R1_FB2_Msk (0x1U << CAN_F4R1_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F4R1_FB2 CAN_F4R1_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F4R1_FB3_Pos (3U)
-#define CAN_F4R1_FB3_Msk (0x1U << CAN_F4R1_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F4R1_FB3 CAN_F4R1_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F4R1_FB4_Pos (4U)
-#define CAN_F4R1_FB4_Msk (0x1U << CAN_F4R1_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F4R1_FB4 CAN_F4R1_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F4R1_FB5_Pos (5U)
-#define CAN_F4R1_FB5_Msk (0x1U << CAN_F4R1_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F4R1_FB5 CAN_F4R1_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F4R1_FB6_Pos (6U)
-#define CAN_F4R1_FB6_Msk (0x1U << CAN_F4R1_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F4R1_FB6 CAN_F4R1_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F4R1_FB7_Pos (7U)
-#define CAN_F4R1_FB7_Msk (0x1U << CAN_F4R1_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F4R1_FB7 CAN_F4R1_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F4R1_FB8_Pos (8U)
-#define CAN_F4R1_FB8_Msk (0x1U << CAN_F4R1_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F4R1_FB8 CAN_F4R1_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F4R1_FB9_Pos (9U)
-#define CAN_F4R1_FB9_Msk (0x1U << CAN_F4R1_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F4R1_FB9 CAN_F4R1_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F4R1_FB10_Pos (10U)
-#define CAN_F4R1_FB10_Msk (0x1U << CAN_F4R1_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F4R1_FB10 CAN_F4R1_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F4R1_FB11_Pos (11U)
-#define CAN_F4R1_FB11_Msk (0x1U << CAN_F4R1_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F4R1_FB11 CAN_F4R1_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F4R1_FB12_Pos (12U)
-#define CAN_F4R1_FB12_Msk (0x1U << CAN_F4R1_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F4R1_FB12 CAN_F4R1_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F4R1_FB13_Pos (13U)
-#define CAN_F4R1_FB13_Msk (0x1U << CAN_F4R1_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F4R1_FB13 CAN_F4R1_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F4R1_FB14_Pos (14U)
-#define CAN_F4R1_FB14_Msk (0x1U << CAN_F4R1_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F4R1_FB14 CAN_F4R1_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F4R1_FB15_Pos (15U)
-#define CAN_F4R1_FB15_Msk (0x1U << CAN_F4R1_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F4R1_FB15 CAN_F4R1_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F4R1_FB16_Pos (16U)
-#define CAN_F4R1_FB16_Msk (0x1U << CAN_F4R1_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F4R1_FB16 CAN_F4R1_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F4R1_FB17_Pos (17U)
-#define CAN_F4R1_FB17_Msk (0x1U << CAN_F4R1_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F4R1_FB17 CAN_F4R1_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F4R1_FB18_Pos (18U)
-#define CAN_F4R1_FB18_Msk (0x1U << CAN_F4R1_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F4R1_FB18 CAN_F4R1_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F4R1_FB19_Pos (19U)
-#define CAN_F4R1_FB19_Msk (0x1U << CAN_F4R1_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F4R1_FB19 CAN_F4R1_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F4R1_FB20_Pos (20U)
-#define CAN_F4R1_FB20_Msk (0x1U << CAN_F4R1_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F4R1_FB20 CAN_F4R1_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F4R1_FB21_Pos (21U)
-#define CAN_F4R1_FB21_Msk (0x1U << CAN_F4R1_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F4R1_FB21 CAN_F4R1_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F4R1_FB22_Pos (22U)
-#define CAN_F4R1_FB22_Msk (0x1U << CAN_F4R1_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F4R1_FB22 CAN_F4R1_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F4R1_FB23_Pos (23U)
-#define CAN_F4R1_FB23_Msk (0x1U << CAN_F4R1_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F4R1_FB23 CAN_F4R1_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F4R1_FB24_Pos (24U)
-#define CAN_F4R1_FB24_Msk (0x1U << CAN_F4R1_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F4R1_FB24 CAN_F4R1_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F4R1_FB25_Pos (25U)
-#define CAN_F4R1_FB25_Msk (0x1U << CAN_F4R1_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F4R1_FB25 CAN_F4R1_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F4R1_FB26_Pos (26U)
-#define CAN_F4R1_FB26_Msk (0x1U << CAN_F4R1_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F4R1_FB26 CAN_F4R1_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F4R1_FB27_Pos (27U)
-#define CAN_F4R1_FB27_Msk (0x1U << CAN_F4R1_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F4R1_FB27 CAN_F4R1_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F4R1_FB28_Pos (28U)
-#define CAN_F4R1_FB28_Msk (0x1U << CAN_F4R1_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F4R1_FB28 CAN_F4R1_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F4R1_FB29_Pos (29U)
-#define CAN_F4R1_FB29_Msk (0x1U << CAN_F4R1_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F4R1_FB29 CAN_F4R1_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F4R1_FB30_Pos (30U)
-#define CAN_F4R1_FB30_Msk (0x1U << CAN_F4R1_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F4R1_FB30 CAN_F4R1_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F4R1_FB31_Pos (31U)
-#define CAN_F4R1_FB31_Msk (0x1U << CAN_F4R1_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F4R1_FB31 CAN_F4R1_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F5R1 register *******************/
-#define CAN_F5R1_FB0_Pos (0U)
-#define CAN_F5R1_FB0_Msk (0x1U << CAN_F5R1_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F5R1_FB0 CAN_F5R1_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F5R1_FB1_Pos (1U)
-#define CAN_F5R1_FB1_Msk (0x1U << CAN_F5R1_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F5R1_FB1 CAN_F5R1_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F5R1_FB2_Pos (2U)
-#define CAN_F5R1_FB2_Msk (0x1U << CAN_F5R1_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F5R1_FB2 CAN_F5R1_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F5R1_FB3_Pos (3U)
-#define CAN_F5R1_FB3_Msk (0x1U << CAN_F5R1_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F5R1_FB3 CAN_F5R1_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F5R1_FB4_Pos (4U)
-#define CAN_F5R1_FB4_Msk (0x1U << CAN_F5R1_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F5R1_FB4 CAN_F5R1_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F5R1_FB5_Pos (5U)
-#define CAN_F5R1_FB5_Msk (0x1U << CAN_F5R1_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F5R1_FB5 CAN_F5R1_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F5R1_FB6_Pos (6U)
-#define CAN_F5R1_FB6_Msk (0x1U << CAN_F5R1_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F5R1_FB6 CAN_F5R1_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F5R1_FB7_Pos (7U)
-#define CAN_F5R1_FB7_Msk (0x1U << CAN_F5R1_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F5R1_FB7 CAN_F5R1_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F5R1_FB8_Pos (8U)
-#define CAN_F5R1_FB8_Msk (0x1U << CAN_F5R1_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F5R1_FB8 CAN_F5R1_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F5R1_FB9_Pos (9U)
-#define CAN_F5R1_FB9_Msk (0x1U << CAN_F5R1_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F5R1_FB9 CAN_F5R1_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F5R1_FB10_Pos (10U)
-#define CAN_F5R1_FB10_Msk (0x1U << CAN_F5R1_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F5R1_FB10 CAN_F5R1_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F5R1_FB11_Pos (11U)
-#define CAN_F5R1_FB11_Msk (0x1U << CAN_F5R1_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F5R1_FB11 CAN_F5R1_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F5R1_FB12_Pos (12U)
-#define CAN_F5R1_FB12_Msk (0x1U << CAN_F5R1_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F5R1_FB12 CAN_F5R1_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F5R1_FB13_Pos (13U)
-#define CAN_F5R1_FB13_Msk (0x1U << CAN_F5R1_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F5R1_FB13 CAN_F5R1_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F5R1_FB14_Pos (14U)
-#define CAN_F5R1_FB14_Msk (0x1U << CAN_F5R1_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F5R1_FB14 CAN_F5R1_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F5R1_FB15_Pos (15U)
-#define CAN_F5R1_FB15_Msk (0x1U << CAN_F5R1_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F5R1_FB15 CAN_F5R1_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F5R1_FB16_Pos (16U)
-#define CAN_F5R1_FB16_Msk (0x1U << CAN_F5R1_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F5R1_FB16 CAN_F5R1_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F5R1_FB17_Pos (17U)
-#define CAN_F5R1_FB17_Msk (0x1U << CAN_F5R1_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F5R1_FB17 CAN_F5R1_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F5R1_FB18_Pos (18U)
-#define CAN_F5R1_FB18_Msk (0x1U << CAN_F5R1_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F5R1_FB18 CAN_F5R1_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F5R1_FB19_Pos (19U)
-#define CAN_F5R1_FB19_Msk (0x1U << CAN_F5R1_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F5R1_FB19 CAN_F5R1_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F5R1_FB20_Pos (20U)
-#define CAN_F5R1_FB20_Msk (0x1U << CAN_F5R1_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F5R1_FB20 CAN_F5R1_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F5R1_FB21_Pos (21U)
-#define CAN_F5R1_FB21_Msk (0x1U << CAN_F5R1_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F5R1_FB21 CAN_F5R1_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F5R1_FB22_Pos (22U)
-#define CAN_F5R1_FB22_Msk (0x1U << CAN_F5R1_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F5R1_FB22 CAN_F5R1_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F5R1_FB23_Pos (23U)
-#define CAN_F5R1_FB23_Msk (0x1U << CAN_F5R1_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F5R1_FB23 CAN_F5R1_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F5R1_FB24_Pos (24U)
-#define CAN_F5R1_FB24_Msk (0x1U << CAN_F5R1_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F5R1_FB24 CAN_F5R1_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F5R1_FB25_Pos (25U)
-#define CAN_F5R1_FB25_Msk (0x1U << CAN_F5R1_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F5R1_FB25 CAN_F5R1_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F5R1_FB26_Pos (26U)
-#define CAN_F5R1_FB26_Msk (0x1U << CAN_F5R1_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F5R1_FB26 CAN_F5R1_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F5R1_FB27_Pos (27U)
-#define CAN_F5R1_FB27_Msk (0x1U << CAN_F5R1_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F5R1_FB27 CAN_F5R1_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F5R1_FB28_Pos (28U)
-#define CAN_F5R1_FB28_Msk (0x1U << CAN_F5R1_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F5R1_FB28 CAN_F5R1_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F5R1_FB29_Pos (29U)
-#define CAN_F5R1_FB29_Msk (0x1U << CAN_F5R1_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F5R1_FB29 CAN_F5R1_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F5R1_FB30_Pos (30U)
-#define CAN_F5R1_FB30_Msk (0x1U << CAN_F5R1_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F5R1_FB30 CAN_F5R1_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F5R1_FB31_Pos (31U)
-#define CAN_F5R1_FB31_Msk (0x1U << CAN_F5R1_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F5R1_FB31 CAN_F5R1_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F6R1 register *******************/
-#define CAN_F6R1_FB0_Pos (0U)
-#define CAN_F6R1_FB0_Msk (0x1U << CAN_F6R1_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F6R1_FB0 CAN_F6R1_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F6R1_FB1_Pos (1U)
-#define CAN_F6R1_FB1_Msk (0x1U << CAN_F6R1_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F6R1_FB1 CAN_F6R1_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F6R1_FB2_Pos (2U)
-#define CAN_F6R1_FB2_Msk (0x1U << CAN_F6R1_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F6R1_FB2 CAN_F6R1_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F6R1_FB3_Pos (3U)
-#define CAN_F6R1_FB3_Msk (0x1U << CAN_F6R1_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F6R1_FB3 CAN_F6R1_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F6R1_FB4_Pos (4U)
-#define CAN_F6R1_FB4_Msk (0x1U << CAN_F6R1_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F6R1_FB4 CAN_F6R1_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F6R1_FB5_Pos (5U)
-#define CAN_F6R1_FB5_Msk (0x1U << CAN_F6R1_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F6R1_FB5 CAN_F6R1_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F6R1_FB6_Pos (6U)
-#define CAN_F6R1_FB6_Msk (0x1U << CAN_F6R1_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F6R1_FB6 CAN_F6R1_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F6R1_FB7_Pos (7U)
-#define CAN_F6R1_FB7_Msk (0x1U << CAN_F6R1_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F6R1_FB7 CAN_F6R1_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F6R1_FB8_Pos (8U)
-#define CAN_F6R1_FB8_Msk (0x1U << CAN_F6R1_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F6R1_FB8 CAN_F6R1_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F6R1_FB9_Pos (9U)
-#define CAN_F6R1_FB9_Msk (0x1U << CAN_F6R1_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F6R1_FB9 CAN_F6R1_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F6R1_FB10_Pos (10U)
-#define CAN_F6R1_FB10_Msk (0x1U << CAN_F6R1_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F6R1_FB10 CAN_F6R1_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F6R1_FB11_Pos (11U)
-#define CAN_F6R1_FB11_Msk (0x1U << CAN_F6R1_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F6R1_FB11 CAN_F6R1_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F6R1_FB12_Pos (12U)
-#define CAN_F6R1_FB12_Msk (0x1U << CAN_F6R1_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F6R1_FB12 CAN_F6R1_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F6R1_FB13_Pos (13U)
-#define CAN_F6R1_FB13_Msk (0x1U << CAN_F6R1_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F6R1_FB13 CAN_F6R1_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F6R1_FB14_Pos (14U)
-#define CAN_F6R1_FB14_Msk (0x1U << CAN_F6R1_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F6R1_FB14 CAN_F6R1_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F6R1_FB15_Pos (15U)
-#define CAN_F6R1_FB15_Msk (0x1U << CAN_F6R1_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F6R1_FB15 CAN_F6R1_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F6R1_FB16_Pos (16U)
-#define CAN_F6R1_FB16_Msk (0x1U << CAN_F6R1_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F6R1_FB16 CAN_F6R1_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F6R1_FB17_Pos (17U)
-#define CAN_F6R1_FB17_Msk (0x1U << CAN_F6R1_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F6R1_FB17 CAN_F6R1_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F6R1_FB18_Pos (18U)
-#define CAN_F6R1_FB18_Msk (0x1U << CAN_F6R1_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F6R1_FB18 CAN_F6R1_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F6R1_FB19_Pos (19U)
-#define CAN_F6R1_FB19_Msk (0x1U << CAN_F6R1_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F6R1_FB19 CAN_F6R1_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F6R1_FB20_Pos (20U)
-#define CAN_F6R1_FB20_Msk (0x1U << CAN_F6R1_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F6R1_FB20 CAN_F6R1_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F6R1_FB21_Pos (21U)
-#define CAN_F6R1_FB21_Msk (0x1U << CAN_F6R1_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F6R1_FB21 CAN_F6R1_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F6R1_FB22_Pos (22U)
-#define CAN_F6R1_FB22_Msk (0x1U << CAN_F6R1_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F6R1_FB22 CAN_F6R1_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F6R1_FB23_Pos (23U)
-#define CAN_F6R1_FB23_Msk (0x1U << CAN_F6R1_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F6R1_FB23 CAN_F6R1_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F6R1_FB24_Pos (24U)
-#define CAN_F6R1_FB24_Msk (0x1U << CAN_F6R1_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F6R1_FB24 CAN_F6R1_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F6R1_FB25_Pos (25U)
-#define CAN_F6R1_FB25_Msk (0x1U << CAN_F6R1_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F6R1_FB25 CAN_F6R1_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F6R1_FB26_Pos (26U)
-#define CAN_F6R1_FB26_Msk (0x1U << CAN_F6R1_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F6R1_FB26 CAN_F6R1_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F6R1_FB27_Pos (27U)
-#define CAN_F6R1_FB27_Msk (0x1U << CAN_F6R1_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F6R1_FB27 CAN_F6R1_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F6R1_FB28_Pos (28U)
-#define CAN_F6R1_FB28_Msk (0x1U << CAN_F6R1_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F6R1_FB28 CAN_F6R1_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F6R1_FB29_Pos (29U)
-#define CAN_F6R1_FB29_Msk (0x1U << CAN_F6R1_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F6R1_FB29 CAN_F6R1_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F6R1_FB30_Pos (30U)
-#define CAN_F6R1_FB30_Msk (0x1U << CAN_F6R1_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F6R1_FB30 CAN_F6R1_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F6R1_FB31_Pos (31U)
-#define CAN_F6R1_FB31_Msk (0x1U << CAN_F6R1_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F6R1_FB31 CAN_F6R1_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F7R1 register *******************/
-#define CAN_F7R1_FB0_Pos (0U)
-#define CAN_F7R1_FB0_Msk (0x1U << CAN_F7R1_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F7R1_FB0 CAN_F7R1_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F7R1_FB1_Pos (1U)
-#define CAN_F7R1_FB1_Msk (0x1U << CAN_F7R1_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F7R1_FB1 CAN_F7R1_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F7R1_FB2_Pos (2U)
-#define CAN_F7R1_FB2_Msk (0x1U << CAN_F7R1_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F7R1_FB2 CAN_F7R1_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F7R1_FB3_Pos (3U)
-#define CAN_F7R1_FB3_Msk (0x1U << CAN_F7R1_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F7R1_FB3 CAN_F7R1_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F7R1_FB4_Pos (4U)
-#define CAN_F7R1_FB4_Msk (0x1U << CAN_F7R1_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F7R1_FB4 CAN_F7R1_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F7R1_FB5_Pos (5U)
-#define CAN_F7R1_FB5_Msk (0x1U << CAN_F7R1_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F7R1_FB5 CAN_F7R1_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F7R1_FB6_Pos (6U)
-#define CAN_F7R1_FB6_Msk (0x1U << CAN_F7R1_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F7R1_FB6 CAN_F7R1_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F7R1_FB7_Pos (7U)
-#define CAN_F7R1_FB7_Msk (0x1U << CAN_F7R1_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F7R1_FB7 CAN_F7R1_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F7R1_FB8_Pos (8U)
-#define CAN_F7R1_FB8_Msk (0x1U << CAN_F7R1_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F7R1_FB8 CAN_F7R1_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F7R1_FB9_Pos (9U)
-#define CAN_F7R1_FB9_Msk (0x1U << CAN_F7R1_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F7R1_FB9 CAN_F7R1_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F7R1_FB10_Pos (10U)
-#define CAN_F7R1_FB10_Msk (0x1U << CAN_F7R1_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F7R1_FB10 CAN_F7R1_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F7R1_FB11_Pos (11U)
-#define CAN_F7R1_FB11_Msk (0x1U << CAN_F7R1_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F7R1_FB11 CAN_F7R1_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F7R1_FB12_Pos (12U)
-#define CAN_F7R1_FB12_Msk (0x1U << CAN_F7R1_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F7R1_FB12 CAN_F7R1_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F7R1_FB13_Pos (13U)
-#define CAN_F7R1_FB13_Msk (0x1U << CAN_F7R1_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F7R1_FB13 CAN_F7R1_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F7R1_FB14_Pos (14U)
-#define CAN_F7R1_FB14_Msk (0x1U << CAN_F7R1_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F7R1_FB14 CAN_F7R1_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F7R1_FB15_Pos (15U)
-#define CAN_F7R1_FB15_Msk (0x1U << CAN_F7R1_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F7R1_FB15 CAN_F7R1_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F7R1_FB16_Pos (16U)
-#define CAN_F7R1_FB16_Msk (0x1U << CAN_F7R1_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F7R1_FB16 CAN_F7R1_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F7R1_FB17_Pos (17U)
-#define CAN_F7R1_FB17_Msk (0x1U << CAN_F7R1_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F7R1_FB17 CAN_F7R1_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F7R1_FB18_Pos (18U)
-#define CAN_F7R1_FB18_Msk (0x1U << CAN_F7R1_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F7R1_FB18 CAN_F7R1_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F7R1_FB19_Pos (19U)
-#define CAN_F7R1_FB19_Msk (0x1U << CAN_F7R1_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F7R1_FB19 CAN_F7R1_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F7R1_FB20_Pos (20U)
-#define CAN_F7R1_FB20_Msk (0x1U << CAN_F7R1_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F7R1_FB20 CAN_F7R1_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F7R1_FB21_Pos (21U)
-#define CAN_F7R1_FB21_Msk (0x1U << CAN_F7R1_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F7R1_FB21 CAN_F7R1_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F7R1_FB22_Pos (22U)
-#define CAN_F7R1_FB22_Msk (0x1U << CAN_F7R1_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F7R1_FB22 CAN_F7R1_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F7R1_FB23_Pos (23U)
-#define CAN_F7R1_FB23_Msk (0x1U << CAN_F7R1_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F7R1_FB23 CAN_F7R1_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F7R1_FB24_Pos (24U)
-#define CAN_F7R1_FB24_Msk (0x1U << CAN_F7R1_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F7R1_FB24 CAN_F7R1_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F7R1_FB25_Pos (25U)
-#define CAN_F7R1_FB25_Msk (0x1U << CAN_F7R1_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F7R1_FB25 CAN_F7R1_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F7R1_FB26_Pos (26U)
-#define CAN_F7R1_FB26_Msk (0x1U << CAN_F7R1_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F7R1_FB26 CAN_F7R1_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F7R1_FB27_Pos (27U)
-#define CAN_F7R1_FB27_Msk (0x1U << CAN_F7R1_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F7R1_FB27 CAN_F7R1_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F7R1_FB28_Pos (28U)
-#define CAN_F7R1_FB28_Msk (0x1U << CAN_F7R1_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F7R1_FB28 CAN_F7R1_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F7R1_FB29_Pos (29U)
-#define CAN_F7R1_FB29_Msk (0x1U << CAN_F7R1_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F7R1_FB29 CAN_F7R1_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F7R1_FB30_Pos (30U)
-#define CAN_F7R1_FB30_Msk (0x1U << CAN_F7R1_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F7R1_FB30 CAN_F7R1_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F7R1_FB31_Pos (31U)
-#define CAN_F7R1_FB31_Msk (0x1U << CAN_F7R1_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F7R1_FB31 CAN_F7R1_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F8R1 register *******************/
-#define CAN_F8R1_FB0_Pos (0U)
-#define CAN_F8R1_FB0_Msk (0x1U << CAN_F8R1_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F8R1_FB0 CAN_F8R1_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F8R1_FB1_Pos (1U)
-#define CAN_F8R1_FB1_Msk (0x1U << CAN_F8R1_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F8R1_FB1 CAN_F8R1_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F8R1_FB2_Pos (2U)
-#define CAN_F8R1_FB2_Msk (0x1U << CAN_F8R1_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F8R1_FB2 CAN_F8R1_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F8R1_FB3_Pos (3U)
-#define CAN_F8R1_FB3_Msk (0x1U << CAN_F8R1_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F8R1_FB3 CAN_F8R1_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F8R1_FB4_Pos (4U)
-#define CAN_F8R1_FB4_Msk (0x1U << CAN_F8R1_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F8R1_FB4 CAN_F8R1_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F8R1_FB5_Pos (5U)
-#define CAN_F8R1_FB5_Msk (0x1U << CAN_F8R1_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F8R1_FB5 CAN_F8R1_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F8R1_FB6_Pos (6U)
-#define CAN_F8R1_FB6_Msk (0x1U << CAN_F8R1_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F8R1_FB6 CAN_F8R1_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F8R1_FB7_Pos (7U)
-#define CAN_F8R1_FB7_Msk (0x1U << CAN_F8R1_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F8R1_FB7 CAN_F8R1_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F8R1_FB8_Pos (8U)
-#define CAN_F8R1_FB8_Msk (0x1U << CAN_F8R1_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F8R1_FB8 CAN_F8R1_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F8R1_FB9_Pos (9U)
-#define CAN_F8R1_FB9_Msk (0x1U << CAN_F8R1_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F8R1_FB9 CAN_F8R1_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F8R1_FB10_Pos (10U)
-#define CAN_F8R1_FB10_Msk (0x1U << CAN_F8R1_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F8R1_FB10 CAN_F8R1_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F8R1_FB11_Pos (11U)
-#define CAN_F8R1_FB11_Msk (0x1U << CAN_F8R1_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F8R1_FB11 CAN_F8R1_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F8R1_FB12_Pos (12U)
-#define CAN_F8R1_FB12_Msk (0x1U << CAN_F8R1_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F8R1_FB12 CAN_F8R1_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F8R1_FB13_Pos (13U)
-#define CAN_F8R1_FB13_Msk (0x1U << CAN_F8R1_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F8R1_FB13 CAN_F8R1_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F8R1_FB14_Pos (14U)
-#define CAN_F8R1_FB14_Msk (0x1U << CAN_F8R1_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F8R1_FB14 CAN_F8R1_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F8R1_FB15_Pos (15U)
-#define CAN_F8R1_FB15_Msk (0x1U << CAN_F8R1_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F8R1_FB15 CAN_F8R1_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F8R1_FB16_Pos (16U)
-#define CAN_F8R1_FB16_Msk (0x1U << CAN_F8R1_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F8R1_FB16 CAN_F8R1_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F8R1_FB17_Pos (17U)
-#define CAN_F8R1_FB17_Msk (0x1U << CAN_F8R1_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F8R1_FB17 CAN_F8R1_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F8R1_FB18_Pos (18U)
-#define CAN_F8R1_FB18_Msk (0x1U << CAN_F8R1_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F8R1_FB18 CAN_F8R1_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F8R1_FB19_Pos (19U)
-#define CAN_F8R1_FB19_Msk (0x1U << CAN_F8R1_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F8R1_FB19 CAN_F8R1_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F8R1_FB20_Pos (20U)
-#define CAN_F8R1_FB20_Msk (0x1U << CAN_F8R1_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F8R1_FB20 CAN_F8R1_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F8R1_FB21_Pos (21U)
-#define CAN_F8R1_FB21_Msk (0x1U << CAN_F8R1_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F8R1_FB21 CAN_F8R1_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F8R1_FB22_Pos (22U)
-#define CAN_F8R1_FB22_Msk (0x1U << CAN_F8R1_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F8R1_FB22 CAN_F8R1_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F8R1_FB23_Pos (23U)
-#define CAN_F8R1_FB23_Msk (0x1U << CAN_F8R1_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F8R1_FB23 CAN_F8R1_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F8R1_FB24_Pos (24U)
-#define CAN_F8R1_FB24_Msk (0x1U << CAN_F8R1_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F8R1_FB24 CAN_F8R1_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F8R1_FB25_Pos (25U)
-#define CAN_F8R1_FB25_Msk (0x1U << CAN_F8R1_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F8R1_FB25 CAN_F8R1_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F8R1_FB26_Pos (26U)
-#define CAN_F8R1_FB26_Msk (0x1U << CAN_F8R1_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F8R1_FB26 CAN_F8R1_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F8R1_FB27_Pos (27U)
-#define CAN_F8R1_FB27_Msk (0x1U << CAN_F8R1_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F8R1_FB27 CAN_F8R1_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F8R1_FB28_Pos (28U)
-#define CAN_F8R1_FB28_Msk (0x1U << CAN_F8R1_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F8R1_FB28 CAN_F8R1_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F8R1_FB29_Pos (29U)
-#define CAN_F8R1_FB29_Msk (0x1U << CAN_F8R1_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F8R1_FB29 CAN_F8R1_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F8R1_FB30_Pos (30U)
-#define CAN_F8R1_FB30_Msk (0x1U << CAN_F8R1_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F8R1_FB30 CAN_F8R1_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F8R1_FB31_Pos (31U)
-#define CAN_F8R1_FB31_Msk (0x1U << CAN_F8R1_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F8R1_FB31 CAN_F8R1_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F9R1 register *******************/
-#define CAN_F9R1_FB0_Pos (0U)
-#define CAN_F9R1_FB0_Msk (0x1U << CAN_F9R1_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F9R1_FB0 CAN_F9R1_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F9R1_FB1_Pos (1U)
-#define CAN_F9R1_FB1_Msk (0x1U << CAN_F9R1_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F9R1_FB1 CAN_F9R1_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F9R1_FB2_Pos (2U)
-#define CAN_F9R1_FB2_Msk (0x1U << CAN_F9R1_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F9R1_FB2 CAN_F9R1_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F9R1_FB3_Pos (3U)
-#define CAN_F9R1_FB3_Msk (0x1U << CAN_F9R1_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F9R1_FB3 CAN_F9R1_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F9R1_FB4_Pos (4U)
-#define CAN_F9R1_FB4_Msk (0x1U << CAN_F9R1_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F9R1_FB4 CAN_F9R1_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F9R1_FB5_Pos (5U)
-#define CAN_F9R1_FB5_Msk (0x1U << CAN_F9R1_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F9R1_FB5 CAN_F9R1_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F9R1_FB6_Pos (6U)
-#define CAN_F9R1_FB6_Msk (0x1U << CAN_F9R1_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F9R1_FB6 CAN_F9R1_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F9R1_FB7_Pos (7U)
-#define CAN_F9R1_FB7_Msk (0x1U << CAN_F9R1_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F9R1_FB7 CAN_F9R1_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F9R1_FB8_Pos (8U)
-#define CAN_F9R1_FB8_Msk (0x1U << CAN_F9R1_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F9R1_FB8 CAN_F9R1_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F9R1_FB9_Pos (9U)
-#define CAN_F9R1_FB9_Msk (0x1U << CAN_F9R1_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F9R1_FB9 CAN_F9R1_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F9R1_FB10_Pos (10U)
-#define CAN_F9R1_FB10_Msk (0x1U << CAN_F9R1_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F9R1_FB10 CAN_F9R1_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F9R1_FB11_Pos (11U)
-#define CAN_F9R1_FB11_Msk (0x1U << CAN_F9R1_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F9R1_FB11 CAN_F9R1_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F9R1_FB12_Pos (12U)
-#define CAN_F9R1_FB12_Msk (0x1U << CAN_F9R1_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F9R1_FB12 CAN_F9R1_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F9R1_FB13_Pos (13U)
-#define CAN_F9R1_FB13_Msk (0x1U << CAN_F9R1_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F9R1_FB13 CAN_F9R1_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F9R1_FB14_Pos (14U)
-#define CAN_F9R1_FB14_Msk (0x1U << CAN_F9R1_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F9R1_FB14 CAN_F9R1_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F9R1_FB15_Pos (15U)
-#define CAN_F9R1_FB15_Msk (0x1U << CAN_F9R1_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F9R1_FB15 CAN_F9R1_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F9R1_FB16_Pos (16U)
-#define CAN_F9R1_FB16_Msk (0x1U << CAN_F9R1_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F9R1_FB16 CAN_F9R1_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F9R1_FB17_Pos (17U)
-#define CAN_F9R1_FB17_Msk (0x1U << CAN_F9R1_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F9R1_FB17 CAN_F9R1_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F9R1_FB18_Pos (18U)
-#define CAN_F9R1_FB18_Msk (0x1U << CAN_F9R1_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F9R1_FB18 CAN_F9R1_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F9R1_FB19_Pos (19U)
-#define CAN_F9R1_FB19_Msk (0x1U << CAN_F9R1_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F9R1_FB19 CAN_F9R1_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F9R1_FB20_Pos (20U)
-#define CAN_F9R1_FB20_Msk (0x1U << CAN_F9R1_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F9R1_FB20 CAN_F9R1_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F9R1_FB21_Pos (21U)
-#define CAN_F9R1_FB21_Msk (0x1U << CAN_F9R1_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F9R1_FB21 CAN_F9R1_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F9R1_FB22_Pos (22U)
-#define CAN_F9R1_FB22_Msk (0x1U << CAN_F9R1_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F9R1_FB22 CAN_F9R1_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F9R1_FB23_Pos (23U)
-#define CAN_F9R1_FB23_Msk (0x1U << CAN_F9R1_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F9R1_FB23 CAN_F9R1_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F9R1_FB24_Pos (24U)
-#define CAN_F9R1_FB24_Msk (0x1U << CAN_F9R1_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F9R1_FB24 CAN_F9R1_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F9R1_FB25_Pos (25U)
-#define CAN_F9R1_FB25_Msk (0x1U << CAN_F9R1_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F9R1_FB25 CAN_F9R1_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F9R1_FB26_Pos (26U)
-#define CAN_F9R1_FB26_Msk (0x1U << CAN_F9R1_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F9R1_FB26 CAN_F9R1_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F9R1_FB27_Pos (27U)
-#define CAN_F9R1_FB27_Msk (0x1U << CAN_F9R1_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F9R1_FB27 CAN_F9R1_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F9R1_FB28_Pos (28U)
-#define CAN_F9R1_FB28_Msk (0x1U << CAN_F9R1_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F9R1_FB28 CAN_F9R1_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F9R1_FB29_Pos (29U)
-#define CAN_F9R1_FB29_Msk (0x1U << CAN_F9R1_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F9R1_FB29 CAN_F9R1_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F9R1_FB30_Pos (30U)
-#define CAN_F9R1_FB30_Msk (0x1U << CAN_F9R1_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F9R1_FB30 CAN_F9R1_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F9R1_FB31_Pos (31U)
-#define CAN_F9R1_FB31_Msk (0x1U << CAN_F9R1_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F9R1_FB31 CAN_F9R1_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F10R1 register ******************/
-#define CAN_F10R1_FB0_Pos (0U)
-#define CAN_F10R1_FB0_Msk (0x1U << CAN_F10R1_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F10R1_FB0 CAN_F10R1_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F10R1_FB1_Pos (1U)
-#define CAN_F10R1_FB1_Msk (0x1U << CAN_F10R1_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F10R1_FB1 CAN_F10R1_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F10R1_FB2_Pos (2U)
-#define CAN_F10R1_FB2_Msk (0x1U << CAN_F10R1_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F10R1_FB2 CAN_F10R1_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F10R1_FB3_Pos (3U)
-#define CAN_F10R1_FB3_Msk (0x1U << CAN_F10R1_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F10R1_FB3 CAN_F10R1_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F10R1_FB4_Pos (4U)
-#define CAN_F10R1_FB4_Msk (0x1U << CAN_F10R1_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F10R1_FB4 CAN_F10R1_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F10R1_FB5_Pos (5U)
-#define CAN_F10R1_FB5_Msk (0x1U << CAN_F10R1_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F10R1_FB5 CAN_F10R1_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F10R1_FB6_Pos (6U)
-#define CAN_F10R1_FB6_Msk (0x1U << CAN_F10R1_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F10R1_FB6 CAN_F10R1_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F10R1_FB7_Pos (7U)
-#define CAN_F10R1_FB7_Msk (0x1U << CAN_F10R1_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F10R1_FB7 CAN_F10R1_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F10R1_FB8_Pos (8U)
-#define CAN_F10R1_FB8_Msk (0x1U << CAN_F10R1_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F10R1_FB8 CAN_F10R1_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F10R1_FB9_Pos (9U)
-#define CAN_F10R1_FB9_Msk (0x1U << CAN_F10R1_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F10R1_FB9 CAN_F10R1_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F10R1_FB10_Pos (10U)
-#define CAN_F10R1_FB10_Msk (0x1U << CAN_F10R1_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F10R1_FB10 CAN_F10R1_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F10R1_FB11_Pos (11U)
-#define CAN_F10R1_FB11_Msk (0x1U << CAN_F10R1_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F10R1_FB11 CAN_F10R1_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F10R1_FB12_Pos (12U)
-#define CAN_F10R1_FB12_Msk (0x1U << CAN_F10R1_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F10R1_FB12 CAN_F10R1_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F10R1_FB13_Pos (13U)
-#define CAN_F10R1_FB13_Msk (0x1U << CAN_F10R1_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F10R1_FB13 CAN_F10R1_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F10R1_FB14_Pos (14U)
-#define CAN_F10R1_FB14_Msk (0x1U << CAN_F10R1_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F10R1_FB14 CAN_F10R1_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F10R1_FB15_Pos (15U)
-#define CAN_F10R1_FB15_Msk (0x1U << CAN_F10R1_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F10R1_FB15 CAN_F10R1_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F10R1_FB16_Pos (16U)
-#define CAN_F10R1_FB16_Msk (0x1U << CAN_F10R1_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F10R1_FB16 CAN_F10R1_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F10R1_FB17_Pos (17U)
-#define CAN_F10R1_FB17_Msk (0x1U << CAN_F10R1_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F10R1_FB17 CAN_F10R1_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F10R1_FB18_Pos (18U)
-#define CAN_F10R1_FB18_Msk (0x1U << CAN_F10R1_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F10R1_FB18 CAN_F10R1_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F10R1_FB19_Pos (19U)
-#define CAN_F10R1_FB19_Msk (0x1U << CAN_F10R1_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F10R1_FB19 CAN_F10R1_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F10R1_FB20_Pos (20U)
-#define CAN_F10R1_FB20_Msk (0x1U << CAN_F10R1_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F10R1_FB20 CAN_F10R1_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F10R1_FB21_Pos (21U)
-#define CAN_F10R1_FB21_Msk (0x1U << CAN_F10R1_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F10R1_FB21 CAN_F10R1_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F10R1_FB22_Pos (22U)
-#define CAN_F10R1_FB22_Msk (0x1U << CAN_F10R1_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F10R1_FB22 CAN_F10R1_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F10R1_FB23_Pos (23U)
-#define CAN_F10R1_FB23_Msk (0x1U << CAN_F10R1_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F10R1_FB23 CAN_F10R1_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F10R1_FB24_Pos (24U)
-#define CAN_F10R1_FB24_Msk (0x1U << CAN_F10R1_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F10R1_FB24 CAN_F10R1_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F10R1_FB25_Pos (25U)
-#define CAN_F10R1_FB25_Msk (0x1U << CAN_F10R1_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F10R1_FB25 CAN_F10R1_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F10R1_FB26_Pos (26U)
-#define CAN_F10R1_FB26_Msk (0x1U << CAN_F10R1_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F10R1_FB26 CAN_F10R1_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F10R1_FB27_Pos (27U)
-#define CAN_F10R1_FB27_Msk (0x1U << CAN_F10R1_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F10R1_FB27 CAN_F10R1_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F10R1_FB28_Pos (28U)
-#define CAN_F10R1_FB28_Msk (0x1U << CAN_F10R1_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F10R1_FB28 CAN_F10R1_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F10R1_FB29_Pos (29U)
-#define CAN_F10R1_FB29_Msk (0x1U << CAN_F10R1_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F10R1_FB29 CAN_F10R1_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F10R1_FB30_Pos (30U)
-#define CAN_F10R1_FB30_Msk (0x1U << CAN_F10R1_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F10R1_FB30 CAN_F10R1_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F10R1_FB31_Pos (31U)
-#define CAN_F10R1_FB31_Msk (0x1U << CAN_F10R1_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F10R1_FB31 CAN_F10R1_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F11R1 register ******************/
-#define CAN_F11R1_FB0_Pos (0U)
-#define CAN_F11R1_FB0_Msk (0x1U << CAN_F11R1_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F11R1_FB0 CAN_F11R1_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F11R1_FB1_Pos (1U)
-#define CAN_F11R1_FB1_Msk (0x1U << CAN_F11R1_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F11R1_FB1 CAN_F11R1_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F11R1_FB2_Pos (2U)
-#define CAN_F11R1_FB2_Msk (0x1U << CAN_F11R1_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F11R1_FB2 CAN_F11R1_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F11R1_FB3_Pos (3U)
-#define CAN_F11R1_FB3_Msk (0x1U << CAN_F11R1_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F11R1_FB3 CAN_F11R1_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F11R1_FB4_Pos (4U)
-#define CAN_F11R1_FB4_Msk (0x1U << CAN_F11R1_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F11R1_FB4 CAN_F11R1_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F11R1_FB5_Pos (5U)
-#define CAN_F11R1_FB5_Msk (0x1U << CAN_F11R1_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F11R1_FB5 CAN_F11R1_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F11R1_FB6_Pos (6U)
-#define CAN_F11R1_FB6_Msk (0x1U << CAN_F11R1_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F11R1_FB6 CAN_F11R1_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F11R1_FB7_Pos (7U)
-#define CAN_F11R1_FB7_Msk (0x1U << CAN_F11R1_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F11R1_FB7 CAN_F11R1_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F11R1_FB8_Pos (8U)
-#define CAN_F11R1_FB8_Msk (0x1U << CAN_F11R1_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F11R1_FB8 CAN_F11R1_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F11R1_FB9_Pos (9U)
-#define CAN_F11R1_FB9_Msk (0x1U << CAN_F11R1_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F11R1_FB9 CAN_F11R1_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F11R1_FB10_Pos (10U)
-#define CAN_F11R1_FB10_Msk (0x1U << CAN_F11R1_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F11R1_FB10 CAN_F11R1_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F11R1_FB11_Pos (11U)
-#define CAN_F11R1_FB11_Msk (0x1U << CAN_F11R1_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F11R1_FB11 CAN_F11R1_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F11R1_FB12_Pos (12U)
-#define CAN_F11R1_FB12_Msk (0x1U << CAN_F11R1_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F11R1_FB12 CAN_F11R1_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F11R1_FB13_Pos (13U)
-#define CAN_F11R1_FB13_Msk (0x1U << CAN_F11R1_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F11R1_FB13 CAN_F11R1_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F11R1_FB14_Pos (14U)
-#define CAN_F11R1_FB14_Msk (0x1U << CAN_F11R1_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F11R1_FB14 CAN_F11R1_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F11R1_FB15_Pos (15U)
-#define CAN_F11R1_FB15_Msk (0x1U << CAN_F11R1_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F11R1_FB15 CAN_F11R1_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F11R1_FB16_Pos (16U)
-#define CAN_F11R1_FB16_Msk (0x1U << CAN_F11R1_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F11R1_FB16 CAN_F11R1_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F11R1_FB17_Pos (17U)
-#define CAN_F11R1_FB17_Msk (0x1U << CAN_F11R1_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F11R1_FB17 CAN_F11R1_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F11R1_FB18_Pos (18U)
-#define CAN_F11R1_FB18_Msk (0x1U << CAN_F11R1_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F11R1_FB18 CAN_F11R1_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F11R1_FB19_Pos (19U)
-#define CAN_F11R1_FB19_Msk (0x1U << CAN_F11R1_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F11R1_FB19 CAN_F11R1_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F11R1_FB20_Pos (20U)
-#define CAN_F11R1_FB20_Msk (0x1U << CAN_F11R1_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F11R1_FB20 CAN_F11R1_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F11R1_FB21_Pos (21U)
-#define CAN_F11R1_FB21_Msk (0x1U << CAN_F11R1_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F11R1_FB21 CAN_F11R1_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F11R1_FB22_Pos (22U)
-#define CAN_F11R1_FB22_Msk (0x1U << CAN_F11R1_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F11R1_FB22 CAN_F11R1_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F11R1_FB23_Pos (23U)
-#define CAN_F11R1_FB23_Msk (0x1U << CAN_F11R1_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F11R1_FB23 CAN_F11R1_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F11R1_FB24_Pos (24U)
-#define CAN_F11R1_FB24_Msk (0x1U << CAN_F11R1_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F11R1_FB24 CAN_F11R1_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F11R1_FB25_Pos (25U)
-#define CAN_F11R1_FB25_Msk (0x1U << CAN_F11R1_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F11R1_FB25 CAN_F11R1_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F11R1_FB26_Pos (26U)
-#define CAN_F11R1_FB26_Msk (0x1U << CAN_F11R1_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F11R1_FB26 CAN_F11R1_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F11R1_FB27_Pos (27U)
-#define CAN_F11R1_FB27_Msk (0x1U << CAN_F11R1_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F11R1_FB27 CAN_F11R1_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F11R1_FB28_Pos (28U)
-#define CAN_F11R1_FB28_Msk (0x1U << CAN_F11R1_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F11R1_FB28 CAN_F11R1_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F11R1_FB29_Pos (29U)
-#define CAN_F11R1_FB29_Msk (0x1U << CAN_F11R1_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F11R1_FB29 CAN_F11R1_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F11R1_FB30_Pos (30U)
-#define CAN_F11R1_FB30_Msk (0x1U << CAN_F11R1_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F11R1_FB30 CAN_F11R1_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F11R1_FB31_Pos (31U)
-#define CAN_F11R1_FB31_Msk (0x1U << CAN_F11R1_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F11R1_FB31 CAN_F11R1_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F12R1 register ******************/
-#define CAN_F12R1_FB0_Pos (0U)
-#define CAN_F12R1_FB0_Msk (0x1U << CAN_F12R1_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F12R1_FB0 CAN_F12R1_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F12R1_FB1_Pos (1U)
-#define CAN_F12R1_FB1_Msk (0x1U << CAN_F12R1_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F12R1_FB1 CAN_F12R1_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F12R1_FB2_Pos (2U)
-#define CAN_F12R1_FB2_Msk (0x1U << CAN_F12R1_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F12R1_FB2 CAN_F12R1_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F12R1_FB3_Pos (3U)
-#define CAN_F12R1_FB3_Msk (0x1U << CAN_F12R1_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F12R1_FB3 CAN_F12R1_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F12R1_FB4_Pos (4U)
-#define CAN_F12R1_FB4_Msk (0x1U << CAN_F12R1_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F12R1_FB4 CAN_F12R1_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F12R1_FB5_Pos (5U)
-#define CAN_F12R1_FB5_Msk (0x1U << CAN_F12R1_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F12R1_FB5 CAN_F12R1_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F12R1_FB6_Pos (6U)
-#define CAN_F12R1_FB6_Msk (0x1U << CAN_F12R1_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F12R1_FB6 CAN_F12R1_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F12R1_FB7_Pos (7U)
-#define CAN_F12R1_FB7_Msk (0x1U << CAN_F12R1_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F12R1_FB7 CAN_F12R1_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F12R1_FB8_Pos (8U)
-#define CAN_F12R1_FB8_Msk (0x1U << CAN_F12R1_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F12R1_FB8 CAN_F12R1_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F12R1_FB9_Pos (9U)
-#define CAN_F12R1_FB9_Msk (0x1U << CAN_F12R1_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F12R1_FB9 CAN_F12R1_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F12R1_FB10_Pos (10U)
-#define CAN_F12R1_FB10_Msk (0x1U << CAN_F12R1_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F12R1_FB10 CAN_F12R1_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F12R1_FB11_Pos (11U)
-#define CAN_F12R1_FB11_Msk (0x1U << CAN_F12R1_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F12R1_FB11 CAN_F12R1_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F12R1_FB12_Pos (12U)
-#define CAN_F12R1_FB12_Msk (0x1U << CAN_F12R1_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F12R1_FB12 CAN_F12R1_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F12R1_FB13_Pos (13U)
-#define CAN_F12R1_FB13_Msk (0x1U << CAN_F12R1_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F12R1_FB13 CAN_F12R1_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F12R1_FB14_Pos (14U)
-#define CAN_F12R1_FB14_Msk (0x1U << CAN_F12R1_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F12R1_FB14 CAN_F12R1_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F12R1_FB15_Pos (15U)
-#define CAN_F12R1_FB15_Msk (0x1U << CAN_F12R1_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F12R1_FB15 CAN_F12R1_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F12R1_FB16_Pos (16U)
-#define CAN_F12R1_FB16_Msk (0x1U << CAN_F12R1_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F12R1_FB16 CAN_F12R1_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F12R1_FB17_Pos (17U)
-#define CAN_F12R1_FB17_Msk (0x1U << CAN_F12R1_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F12R1_FB17 CAN_F12R1_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F12R1_FB18_Pos (18U)
-#define CAN_F12R1_FB18_Msk (0x1U << CAN_F12R1_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F12R1_FB18 CAN_F12R1_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F12R1_FB19_Pos (19U)
-#define CAN_F12R1_FB19_Msk (0x1U << CAN_F12R1_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F12R1_FB19 CAN_F12R1_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F12R1_FB20_Pos (20U)
-#define CAN_F12R1_FB20_Msk (0x1U << CAN_F12R1_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F12R1_FB20 CAN_F12R1_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F12R1_FB21_Pos (21U)
-#define CAN_F12R1_FB21_Msk (0x1U << CAN_F12R1_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F12R1_FB21 CAN_F12R1_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F12R1_FB22_Pos (22U)
-#define CAN_F12R1_FB22_Msk (0x1U << CAN_F12R1_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F12R1_FB22 CAN_F12R1_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F12R1_FB23_Pos (23U)
-#define CAN_F12R1_FB23_Msk (0x1U << CAN_F12R1_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F12R1_FB23 CAN_F12R1_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F12R1_FB24_Pos (24U)
-#define CAN_F12R1_FB24_Msk (0x1U << CAN_F12R1_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F12R1_FB24 CAN_F12R1_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F12R1_FB25_Pos (25U)
-#define CAN_F12R1_FB25_Msk (0x1U << CAN_F12R1_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F12R1_FB25 CAN_F12R1_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F12R1_FB26_Pos (26U)
-#define CAN_F12R1_FB26_Msk (0x1U << CAN_F12R1_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F12R1_FB26 CAN_F12R1_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F12R1_FB27_Pos (27U)
-#define CAN_F12R1_FB27_Msk (0x1U << CAN_F12R1_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F12R1_FB27 CAN_F12R1_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F12R1_FB28_Pos (28U)
-#define CAN_F12R1_FB28_Msk (0x1U << CAN_F12R1_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F12R1_FB28 CAN_F12R1_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F12R1_FB29_Pos (29U)
-#define CAN_F12R1_FB29_Msk (0x1U << CAN_F12R1_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F12R1_FB29 CAN_F12R1_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F12R1_FB30_Pos (30U)
-#define CAN_F12R1_FB30_Msk (0x1U << CAN_F12R1_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F12R1_FB30 CAN_F12R1_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F12R1_FB31_Pos (31U)
-#define CAN_F12R1_FB31_Msk (0x1U << CAN_F12R1_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F12R1_FB31 CAN_F12R1_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F13R1 register ******************/
-#define CAN_F13R1_FB0_Pos (0U)
-#define CAN_F13R1_FB0_Msk (0x1U << CAN_F13R1_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F13R1_FB0 CAN_F13R1_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F13R1_FB1_Pos (1U)
-#define CAN_F13R1_FB1_Msk (0x1U << CAN_F13R1_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F13R1_FB1 CAN_F13R1_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F13R1_FB2_Pos (2U)
-#define CAN_F13R1_FB2_Msk (0x1U << CAN_F13R1_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F13R1_FB2 CAN_F13R1_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F13R1_FB3_Pos (3U)
-#define CAN_F13R1_FB3_Msk (0x1U << CAN_F13R1_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F13R1_FB3 CAN_F13R1_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F13R1_FB4_Pos (4U)
-#define CAN_F13R1_FB4_Msk (0x1U << CAN_F13R1_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F13R1_FB4 CAN_F13R1_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F13R1_FB5_Pos (5U)
-#define CAN_F13R1_FB5_Msk (0x1U << CAN_F13R1_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F13R1_FB5 CAN_F13R1_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F13R1_FB6_Pos (6U)
-#define CAN_F13R1_FB6_Msk (0x1U << CAN_F13R1_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F13R1_FB6 CAN_F13R1_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F13R1_FB7_Pos (7U)
-#define CAN_F13R1_FB7_Msk (0x1U << CAN_F13R1_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F13R1_FB7 CAN_F13R1_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F13R1_FB8_Pos (8U)
-#define CAN_F13R1_FB8_Msk (0x1U << CAN_F13R1_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F13R1_FB8 CAN_F13R1_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F13R1_FB9_Pos (9U)
-#define CAN_F13R1_FB9_Msk (0x1U << CAN_F13R1_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F13R1_FB9 CAN_F13R1_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F13R1_FB10_Pos (10U)
-#define CAN_F13R1_FB10_Msk (0x1U << CAN_F13R1_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F13R1_FB10 CAN_F13R1_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F13R1_FB11_Pos (11U)
-#define CAN_F13R1_FB11_Msk (0x1U << CAN_F13R1_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F13R1_FB11 CAN_F13R1_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F13R1_FB12_Pos (12U)
-#define CAN_F13R1_FB12_Msk (0x1U << CAN_F13R1_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F13R1_FB12 CAN_F13R1_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F13R1_FB13_Pos (13U)
-#define CAN_F13R1_FB13_Msk (0x1U << CAN_F13R1_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F13R1_FB13 CAN_F13R1_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F13R1_FB14_Pos (14U)
-#define CAN_F13R1_FB14_Msk (0x1U << CAN_F13R1_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F13R1_FB14 CAN_F13R1_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F13R1_FB15_Pos (15U)
-#define CAN_F13R1_FB15_Msk (0x1U << CAN_F13R1_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F13R1_FB15 CAN_F13R1_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F13R1_FB16_Pos (16U)
-#define CAN_F13R1_FB16_Msk (0x1U << CAN_F13R1_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F13R1_FB16 CAN_F13R1_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F13R1_FB17_Pos (17U)
-#define CAN_F13R1_FB17_Msk (0x1U << CAN_F13R1_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F13R1_FB17 CAN_F13R1_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F13R1_FB18_Pos (18U)
-#define CAN_F13R1_FB18_Msk (0x1U << CAN_F13R1_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F13R1_FB18 CAN_F13R1_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F13R1_FB19_Pos (19U)
-#define CAN_F13R1_FB19_Msk (0x1U << CAN_F13R1_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F13R1_FB19 CAN_F13R1_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F13R1_FB20_Pos (20U)
-#define CAN_F13R1_FB20_Msk (0x1U << CAN_F13R1_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F13R1_FB20 CAN_F13R1_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F13R1_FB21_Pos (21U)
-#define CAN_F13R1_FB21_Msk (0x1U << CAN_F13R1_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F13R1_FB21 CAN_F13R1_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F13R1_FB22_Pos (22U)
-#define CAN_F13R1_FB22_Msk (0x1U << CAN_F13R1_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F13R1_FB22 CAN_F13R1_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F13R1_FB23_Pos (23U)
-#define CAN_F13R1_FB23_Msk (0x1U << CAN_F13R1_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F13R1_FB23 CAN_F13R1_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F13R1_FB24_Pos (24U)
-#define CAN_F13R1_FB24_Msk (0x1U << CAN_F13R1_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F13R1_FB24 CAN_F13R1_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F13R1_FB25_Pos (25U)
-#define CAN_F13R1_FB25_Msk (0x1U << CAN_F13R1_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F13R1_FB25 CAN_F13R1_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F13R1_FB26_Pos (26U)
-#define CAN_F13R1_FB26_Msk (0x1U << CAN_F13R1_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F13R1_FB26 CAN_F13R1_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F13R1_FB27_Pos (27U)
-#define CAN_F13R1_FB27_Msk (0x1U << CAN_F13R1_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F13R1_FB27 CAN_F13R1_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F13R1_FB28_Pos (28U)
-#define CAN_F13R1_FB28_Msk (0x1U << CAN_F13R1_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F13R1_FB28 CAN_F13R1_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F13R1_FB29_Pos (29U)
-#define CAN_F13R1_FB29_Msk (0x1U << CAN_F13R1_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F13R1_FB29 CAN_F13R1_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F13R1_FB30_Pos (30U)
-#define CAN_F13R1_FB30_Msk (0x1U << CAN_F13R1_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F13R1_FB30 CAN_F13R1_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F13R1_FB31_Pos (31U)
-#define CAN_F13R1_FB31_Msk (0x1U << CAN_F13R1_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F13R1_FB31 CAN_F13R1_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F0R2 register *******************/
-#define CAN_F0R2_FB0_Pos (0U)
-#define CAN_F0R2_FB0_Msk (0x1U << CAN_F0R2_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F0R2_FB0 CAN_F0R2_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F0R2_FB1_Pos (1U)
-#define CAN_F0R2_FB1_Msk (0x1U << CAN_F0R2_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F0R2_FB1 CAN_F0R2_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F0R2_FB2_Pos (2U)
-#define CAN_F0R2_FB2_Msk (0x1U << CAN_F0R2_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F0R2_FB2 CAN_F0R2_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F0R2_FB3_Pos (3U)
-#define CAN_F0R2_FB3_Msk (0x1U << CAN_F0R2_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F0R2_FB3 CAN_F0R2_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F0R2_FB4_Pos (4U)
-#define CAN_F0R2_FB4_Msk (0x1U << CAN_F0R2_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F0R2_FB4 CAN_F0R2_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F0R2_FB5_Pos (5U)
-#define CAN_F0R2_FB5_Msk (0x1U << CAN_F0R2_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F0R2_FB5 CAN_F0R2_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F0R2_FB6_Pos (6U)
-#define CAN_F0R2_FB6_Msk (0x1U << CAN_F0R2_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F0R2_FB6 CAN_F0R2_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F0R2_FB7_Pos (7U)
-#define CAN_F0R2_FB7_Msk (0x1U << CAN_F0R2_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F0R2_FB7 CAN_F0R2_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F0R2_FB8_Pos (8U)
-#define CAN_F0R2_FB8_Msk (0x1U << CAN_F0R2_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F0R2_FB8 CAN_F0R2_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F0R2_FB9_Pos (9U)
-#define CAN_F0R2_FB9_Msk (0x1U << CAN_F0R2_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F0R2_FB9 CAN_F0R2_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F0R2_FB10_Pos (10U)
-#define CAN_F0R2_FB10_Msk (0x1U << CAN_F0R2_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F0R2_FB10 CAN_F0R2_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F0R2_FB11_Pos (11U)
-#define CAN_F0R2_FB11_Msk (0x1U << CAN_F0R2_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F0R2_FB11 CAN_F0R2_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F0R2_FB12_Pos (12U)
-#define CAN_F0R2_FB12_Msk (0x1U << CAN_F0R2_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F0R2_FB12 CAN_F0R2_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F0R2_FB13_Pos (13U)
-#define CAN_F0R2_FB13_Msk (0x1U << CAN_F0R2_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F0R2_FB13 CAN_F0R2_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F0R2_FB14_Pos (14U)
-#define CAN_F0R2_FB14_Msk (0x1U << CAN_F0R2_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F0R2_FB14 CAN_F0R2_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F0R2_FB15_Pos (15U)
-#define CAN_F0R2_FB15_Msk (0x1U << CAN_F0R2_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F0R2_FB15 CAN_F0R2_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F0R2_FB16_Pos (16U)
-#define CAN_F0R2_FB16_Msk (0x1U << CAN_F0R2_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F0R2_FB16 CAN_F0R2_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F0R2_FB17_Pos (17U)
-#define CAN_F0R2_FB17_Msk (0x1U << CAN_F0R2_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F0R2_FB17 CAN_F0R2_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F0R2_FB18_Pos (18U)
-#define CAN_F0R2_FB18_Msk (0x1U << CAN_F0R2_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F0R2_FB18 CAN_F0R2_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F0R2_FB19_Pos (19U)
-#define CAN_F0R2_FB19_Msk (0x1U << CAN_F0R2_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F0R2_FB19 CAN_F0R2_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F0R2_FB20_Pos (20U)
-#define CAN_F0R2_FB20_Msk (0x1U << CAN_F0R2_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F0R2_FB20 CAN_F0R2_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F0R2_FB21_Pos (21U)
-#define CAN_F0R2_FB21_Msk (0x1U << CAN_F0R2_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F0R2_FB21 CAN_F0R2_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F0R2_FB22_Pos (22U)
-#define CAN_F0R2_FB22_Msk (0x1U << CAN_F0R2_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F0R2_FB22 CAN_F0R2_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F0R2_FB23_Pos (23U)
-#define CAN_F0R2_FB23_Msk (0x1U << CAN_F0R2_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F0R2_FB23 CAN_F0R2_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F0R2_FB24_Pos (24U)
-#define CAN_F0R2_FB24_Msk (0x1U << CAN_F0R2_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F0R2_FB24 CAN_F0R2_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F0R2_FB25_Pos (25U)
-#define CAN_F0R2_FB25_Msk (0x1U << CAN_F0R2_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F0R2_FB25 CAN_F0R2_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F0R2_FB26_Pos (26U)
-#define CAN_F0R2_FB26_Msk (0x1U << CAN_F0R2_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F0R2_FB26 CAN_F0R2_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F0R2_FB27_Pos (27U)
-#define CAN_F0R2_FB27_Msk (0x1U << CAN_F0R2_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F0R2_FB27 CAN_F0R2_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F0R2_FB28_Pos (28U)
-#define CAN_F0R2_FB28_Msk (0x1U << CAN_F0R2_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F0R2_FB28 CAN_F0R2_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F0R2_FB29_Pos (29U)
-#define CAN_F0R2_FB29_Msk (0x1U << CAN_F0R2_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F0R2_FB29 CAN_F0R2_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F0R2_FB30_Pos (30U)
-#define CAN_F0R2_FB30_Msk (0x1U << CAN_F0R2_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F0R2_FB30 CAN_F0R2_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F0R2_FB31_Pos (31U)
-#define CAN_F0R2_FB31_Msk (0x1U << CAN_F0R2_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F0R2_FB31 CAN_F0R2_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F1R2 register *******************/
-#define CAN_F1R2_FB0_Pos (0U)
-#define CAN_F1R2_FB0_Msk (0x1U << CAN_F1R2_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F1R2_FB0 CAN_F1R2_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F1R2_FB1_Pos (1U)
-#define CAN_F1R2_FB1_Msk (0x1U << CAN_F1R2_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F1R2_FB1 CAN_F1R2_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F1R2_FB2_Pos (2U)
-#define CAN_F1R2_FB2_Msk (0x1U << CAN_F1R2_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F1R2_FB2 CAN_F1R2_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F1R2_FB3_Pos (3U)
-#define CAN_F1R2_FB3_Msk (0x1U << CAN_F1R2_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F1R2_FB3 CAN_F1R2_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F1R2_FB4_Pos (4U)
-#define CAN_F1R2_FB4_Msk (0x1U << CAN_F1R2_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F1R2_FB4 CAN_F1R2_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F1R2_FB5_Pos (5U)
-#define CAN_F1R2_FB5_Msk (0x1U << CAN_F1R2_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F1R2_FB5 CAN_F1R2_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F1R2_FB6_Pos (6U)
-#define CAN_F1R2_FB6_Msk (0x1U << CAN_F1R2_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F1R2_FB6 CAN_F1R2_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F1R2_FB7_Pos (7U)
-#define CAN_F1R2_FB7_Msk (0x1U << CAN_F1R2_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F1R2_FB7 CAN_F1R2_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F1R2_FB8_Pos (8U)
-#define CAN_F1R2_FB8_Msk (0x1U << CAN_F1R2_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F1R2_FB8 CAN_F1R2_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F1R2_FB9_Pos (9U)
-#define CAN_F1R2_FB9_Msk (0x1U << CAN_F1R2_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F1R2_FB9 CAN_F1R2_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F1R2_FB10_Pos (10U)
-#define CAN_F1R2_FB10_Msk (0x1U << CAN_F1R2_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F1R2_FB10 CAN_F1R2_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F1R2_FB11_Pos (11U)
-#define CAN_F1R2_FB11_Msk (0x1U << CAN_F1R2_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F1R2_FB11 CAN_F1R2_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F1R2_FB12_Pos (12U)
-#define CAN_F1R2_FB12_Msk (0x1U << CAN_F1R2_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F1R2_FB12 CAN_F1R2_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F1R2_FB13_Pos (13U)
-#define CAN_F1R2_FB13_Msk (0x1U << CAN_F1R2_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F1R2_FB13 CAN_F1R2_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F1R2_FB14_Pos (14U)
-#define CAN_F1R2_FB14_Msk (0x1U << CAN_F1R2_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F1R2_FB14 CAN_F1R2_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F1R2_FB15_Pos (15U)
-#define CAN_F1R2_FB15_Msk (0x1U << CAN_F1R2_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F1R2_FB15 CAN_F1R2_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F1R2_FB16_Pos (16U)
-#define CAN_F1R2_FB16_Msk (0x1U << CAN_F1R2_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F1R2_FB16 CAN_F1R2_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F1R2_FB17_Pos (17U)
-#define CAN_F1R2_FB17_Msk (0x1U << CAN_F1R2_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F1R2_FB17 CAN_F1R2_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F1R2_FB18_Pos (18U)
-#define CAN_F1R2_FB18_Msk (0x1U << CAN_F1R2_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F1R2_FB18 CAN_F1R2_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F1R2_FB19_Pos (19U)
-#define CAN_F1R2_FB19_Msk (0x1U << CAN_F1R2_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F1R2_FB19 CAN_F1R2_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F1R2_FB20_Pos (20U)
-#define CAN_F1R2_FB20_Msk (0x1U << CAN_F1R2_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F1R2_FB20 CAN_F1R2_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F1R2_FB21_Pos (21U)
-#define CAN_F1R2_FB21_Msk (0x1U << CAN_F1R2_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F1R2_FB21 CAN_F1R2_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F1R2_FB22_Pos (22U)
-#define CAN_F1R2_FB22_Msk (0x1U << CAN_F1R2_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F1R2_FB22 CAN_F1R2_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F1R2_FB23_Pos (23U)
-#define CAN_F1R2_FB23_Msk (0x1U << CAN_F1R2_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F1R2_FB23 CAN_F1R2_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F1R2_FB24_Pos (24U)
-#define CAN_F1R2_FB24_Msk (0x1U << CAN_F1R2_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F1R2_FB24 CAN_F1R2_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F1R2_FB25_Pos (25U)
-#define CAN_F1R2_FB25_Msk (0x1U << CAN_F1R2_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F1R2_FB25 CAN_F1R2_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F1R2_FB26_Pos (26U)
-#define CAN_F1R2_FB26_Msk (0x1U << CAN_F1R2_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F1R2_FB26 CAN_F1R2_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F1R2_FB27_Pos (27U)
-#define CAN_F1R2_FB27_Msk (0x1U << CAN_F1R2_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F1R2_FB27 CAN_F1R2_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F1R2_FB28_Pos (28U)
-#define CAN_F1R2_FB28_Msk (0x1U << CAN_F1R2_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F1R2_FB28 CAN_F1R2_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F1R2_FB29_Pos (29U)
-#define CAN_F1R2_FB29_Msk (0x1U << CAN_F1R2_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F1R2_FB29 CAN_F1R2_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F1R2_FB30_Pos (30U)
-#define CAN_F1R2_FB30_Msk (0x1U << CAN_F1R2_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F1R2_FB30 CAN_F1R2_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F1R2_FB31_Pos (31U)
-#define CAN_F1R2_FB31_Msk (0x1U << CAN_F1R2_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F1R2_FB31 CAN_F1R2_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F2R2 register *******************/
-#define CAN_F2R2_FB0_Pos (0U)
-#define CAN_F2R2_FB0_Msk (0x1U << CAN_F2R2_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F2R2_FB0 CAN_F2R2_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F2R2_FB1_Pos (1U)
-#define CAN_F2R2_FB1_Msk (0x1U << CAN_F2R2_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F2R2_FB1 CAN_F2R2_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F2R2_FB2_Pos (2U)
-#define CAN_F2R2_FB2_Msk (0x1U << CAN_F2R2_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F2R2_FB2 CAN_F2R2_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F2R2_FB3_Pos (3U)
-#define CAN_F2R2_FB3_Msk (0x1U << CAN_F2R2_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F2R2_FB3 CAN_F2R2_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F2R2_FB4_Pos (4U)
-#define CAN_F2R2_FB4_Msk (0x1U << CAN_F2R2_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F2R2_FB4 CAN_F2R2_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F2R2_FB5_Pos (5U)
-#define CAN_F2R2_FB5_Msk (0x1U << CAN_F2R2_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F2R2_FB5 CAN_F2R2_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F2R2_FB6_Pos (6U)
-#define CAN_F2R2_FB6_Msk (0x1U << CAN_F2R2_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F2R2_FB6 CAN_F2R2_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F2R2_FB7_Pos (7U)
-#define CAN_F2R2_FB7_Msk (0x1U << CAN_F2R2_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F2R2_FB7 CAN_F2R2_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F2R2_FB8_Pos (8U)
-#define CAN_F2R2_FB8_Msk (0x1U << CAN_F2R2_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F2R2_FB8 CAN_F2R2_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F2R2_FB9_Pos (9U)
-#define CAN_F2R2_FB9_Msk (0x1U << CAN_F2R2_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F2R2_FB9 CAN_F2R2_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F2R2_FB10_Pos (10U)
-#define CAN_F2R2_FB10_Msk (0x1U << CAN_F2R2_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F2R2_FB10 CAN_F2R2_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F2R2_FB11_Pos (11U)
-#define CAN_F2R2_FB11_Msk (0x1U << CAN_F2R2_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F2R2_FB11 CAN_F2R2_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F2R2_FB12_Pos (12U)
-#define CAN_F2R2_FB12_Msk (0x1U << CAN_F2R2_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F2R2_FB12 CAN_F2R2_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F2R2_FB13_Pos (13U)
-#define CAN_F2R2_FB13_Msk (0x1U << CAN_F2R2_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F2R2_FB13 CAN_F2R2_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F2R2_FB14_Pos (14U)
-#define CAN_F2R2_FB14_Msk (0x1U << CAN_F2R2_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F2R2_FB14 CAN_F2R2_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F2R2_FB15_Pos (15U)
-#define CAN_F2R2_FB15_Msk (0x1U << CAN_F2R2_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F2R2_FB15 CAN_F2R2_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F2R2_FB16_Pos (16U)
-#define CAN_F2R2_FB16_Msk (0x1U << CAN_F2R2_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F2R2_FB16 CAN_F2R2_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F2R2_FB17_Pos (17U)
-#define CAN_F2R2_FB17_Msk (0x1U << CAN_F2R2_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F2R2_FB17 CAN_F2R2_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F2R2_FB18_Pos (18U)
-#define CAN_F2R2_FB18_Msk (0x1U << CAN_F2R2_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F2R2_FB18 CAN_F2R2_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F2R2_FB19_Pos (19U)
-#define CAN_F2R2_FB19_Msk (0x1U << CAN_F2R2_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F2R2_FB19 CAN_F2R2_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F2R2_FB20_Pos (20U)
-#define CAN_F2R2_FB20_Msk (0x1U << CAN_F2R2_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F2R2_FB20 CAN_F2R2_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F2R2_FB21_Pos (21U)
-#define CAN_F2R2_FB21_Msk (0x1U << CAN_F2R2_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F2R2_FB21 CAN_F2R2_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F2R2_FB22_Pos (22U)
-#define CAN_F2R2_FB22_Msk (0x1U << CAN_F2R2_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F2R2_FB22 CAN_F2R2_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F2R2_FB23_Pos (23U)
-#define CAN_F2R2_FB23_Msk (0x1U << CAN_F2R2_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F2R2_FB23 CAN_F2R2_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F2R2_FB24_Pos (24U)
-#define CAN_F2R2_FB24_Msk (0x1U << CAN_F2R2_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F2R2_FB24 CAN_F2R2_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F2R2_FB25_Pos (25U)
-#define CAN_F2R2_FB25_Msk (0x1U << CAN_F2R2_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F2R2_FB25 CAN_F2R2_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F2R2_FB26_Pos (26U)
-#define CAN_F2R2_FB26_Msk (0x1U << CAN_F2R2_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F2R2_FB26 CAN_F2R2_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F2R2_FB27_Pos (27U)
-#define CAN_F2R2_FB27_Msk (0x1U << CAN_F2R2_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F2R2_FB27 CAN_F2R2_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F2R2_FB28_Pos (28U)
-#define CAN_F2R2_FB28_Msk (0x1U << CAN_F2R2_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F2R2_FB28 CAN_F2R2_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F2R2_FB29_Pos (29U)
-#define CAN_F2R2_FB29_Msk (0x1U << CAN_F2R2_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F2R2_FB29 CAN_F2R2_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F2R2_FB30_Pos (30U)
-#define CAN_F2R2_FB30_Msk (0x1U << CAN_F2R2_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F2R2_FB30 CAN_F2R2_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F2R2_FB31_Pos (31U)
-#define CAN_F2R2_FB31_Msk (0x1U << CAN_F2R2_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F2R2_FB31 CAN_F2R2_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F3R2 register *******************/
-#define CAN_F3R2_FB0_Pos (0U)
-#define CAN_F3R2_FB0_Msk (0x1U << CAN_F3R2_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F3R2_FB0 CAN_F3R2_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F3R2_FB1_Pos (1U)
-#define CAN_F3R2_FB1_Msk (0x1U << CAN_F3R2_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F3R2_FB1 CAN_F3R2_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F3R2_FB2_Pos (2U)
-#define CAN_F3R2_FB2_Msk (0x1U << CAN_F3R2_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F3R2_FB2 CAN_F3R2_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F3R2_FB3_Pos (3U)
-#define CAN_F3R2_FB3_Msk (0x1U << CAN_F3R2_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F3R2_FB3 CAN_F3R2_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F3R2_FB4_Pos (4U)
-#define CAN_F3R2_FB4_Msk (0x1U << CAN_F3R2_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F3R2_FB4 CAN_F3R2_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F3R2_FB5_Pos (5U)
-#define CAN_F3R2_FB5_Msk (0x1U << CAN_F3R2_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F3R2_FB5 CAN_F3R2_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F3R2_FB6_Pos (6U)
-#define CAN_F3R2_FB6_Msk (0x1U << CAN_F3R2_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F3R2_FB6 CAN_F3R2_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F3R2_FB7_Pos (7U)
-#define CAN_F3R2_FB7_Msk (0x1U << CAN_F3R2_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F3R2_FB7 CAN_F3R2_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F3R2_FB8_Pos (8U)
-#define CAN_F3R2_FB8_Msk (0x1U << CAN_F3R2_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F3R2_FB8 CAN_F3R2_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F3R2_FB9_Pos (9U)
-#define CAN_F3R2_FB9_Msk (0x1U << CAN_F3R2_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F3R2_FB9 CAN_F3R2_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F3R2_FB10_Pos (10U)
-#define CAN_F3R2_FB10_Msk (0x1U << CAN_F3R2_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F3R2_FB10 CAN_F3R2_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F3R2_FB11_Pos (11U)
-#define CAN_F3R2_FB11_Msk (0x1U << CAN_F3R2_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F3R2_FB11 CAN_F3R2_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F3R2_FB12_Pos (12U)
-#define CAN_F3R2_FB12_Msk (0x1U << CAN_F3R2_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F3R2_FB12 CAN_F3R2_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F3R2_FB13_Pos (13U)
-#define CAN_F3R2_FB13_Msk (0x1U << CAN_F3R2_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F3R2_FB13 CAN_F3R2_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F3R2_FB14_Pos (14U)
-#define CAN_F3R2_FB14_Msk (0x1U << CAN_F3R2_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F3R2_FB14 CAN_F3R2_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F3R2_FB15_Pos (15U)
-#define CAN_F3R2_FB15_Msk (0x1U << CAN_F3R2_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F3R2_FB15 CAN_F3R2_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F3R2_FB16_Pos (16U)
-#define CAN_F3R2_FB16_Msk (0x1U << CAN_F3R2_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F3R2_FB16 CAN_F3R2_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F3R2_FB17_Pos (17U)
-#define CAN_F3R2_FB17_Msk (0x1U << CAN_F3R2_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F3R2_FB17 CAN_F3R2_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F3R2_FB18_Pos (18U)
-#define CAN_F3R2_FB18_Msk (0x1U << CAN_F3R2_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F3R2_FB18 CAN_F3R2_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F3R2_FB19_Pos (19U)
-#define CAN_F3R2_FB19_Msk (0x1U << CAN_F3R2_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F3R2_FB19 CAN_F3R2_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F3R2_FB20_Pos (20U)
-#define CAN_F3R2_FB20_Msk (0x1U << CAN_F3R2_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F3R2_FB20 CAN_F3R2_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F3R2_FB21_Pos (21U)
-#define CAN_F3R2_FB21_Msk (0x1U << CAN_F3R2_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F3R2_FB21 CAN_F3R2_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F3R2_FB22_Pos (22U)
-#define CAN_F3R2_FB22_Msk (0x1U << CAN_F3R2_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F3R2_FB22 CAN_F3R2_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F3R2_FB23_Pos (23U)
-#define CAN_F3R2_FB23_Msk (0x1U << CAN_F3R2_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F3R2_FB23 CAN_F3R2_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F3R2_FB24_Pos (24U)
-#define CAN_F3R2_FB24_Msk (0x1U << CAN_F3R2_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F3R2_FB24 CAN_F3R2_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F3R2_FB25_Pos (25U)
-#define CAN_F3R2_FB25_Msk (0x1U << CAN_F3R2_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F3R2_FB25 CAN_F3R2_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F3R2_FB26_Pos (26U)
-#define CAN_F3R2_FB26_Msk (0x1U << CAN_F3R2_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F3R2_FB26 CAN_F3R2_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F3R2_FB27_Pos (27U)
-#define CAN_F3R2_FB27_Msk (0x1U << CAN_F3R2_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F3R2_FB27 CAN_F3R2_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F3R2_FB28_Pos (28U)
-#define CAN_F3R2_FB28_Msk (0x1U << CAN_F3R2_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F3R2_FB28 CAN_F3R2_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F3R2_FB29_Pos (29U)
-#define CAN_F3R2_FB29_Msk (0x1U << CAN_F3R2_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F3R2_FB29 CAN_F3R2_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F3R2_FB30_Pos (30U)
-#define CAN_F3R2_FB30_Msk (0x1U << CAN_F3R2_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F3R2_FB30 CAN_F3R2_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F3R2_FB31_Pos (31U)
-#define CAN_F3R2_FB31_Msk (0x1U << CAN_F3R2_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F3R2_FB31 CAN_F3R2_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F4R2 register *******************/
-#define CAN_F4R2_FB0_Pos (0U)
-#define CAN_F4R2_FB0_Msk (0x1U << CAN_F4R2_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F4R2_FB0 CAN_F4R2_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F4R2_FB1_Pos (1U)
-#define CAN_F4R2_FB1_Msk (0x1U << CAN_F4R2_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F4R2_FB1 CAN_F4R2_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F4R2_FB2_Pos (2U)
-#define CAN_F4R2_FB2_Msk (0x1U << CAN_F4R2_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F4R2_FB2 CAN_F4R2_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F4R2_FB3_Pos (3U)
-#define CAN_F4R2_FB3_Msk (0x1U << CAN_F4R2_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F4R2_FB3 CAN_F4R2_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F4R2_FB4_Pos (4U)
-#define CAN_F4R2_FB4_Msk (0x1U << CAN_F4R2_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F4R2_FB4 CAN_F4R2_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F4R2_FB5_Pos (5U)
-#define CAN_F4R2_FB5_Msk (0x1U << CAN_F4R2_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F4R2_FB5 CAN_F4R2_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F4R2_FB6_Pos (6U)
-#define CAN_F4R2_FB6_Msk (0x1U << CAN_F4R2_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F4R2_FB6 CAN_F4R2_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F4R2_FB7_Pos (7U)
-#define CAN_F4R2_FB7_Msk (0x1U << CAN_F4R2_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F4R2_FB7 CAN_F4R2_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F4R2_FB8_Pos (8U)
-#define CAN_F4R2_FB8_Msk (0x1U << CAN_F4R2_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F4R2_FB8 CAN_F4R2_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F4R2_FB9_Pos (9U)
-#define CAN_F4R2_FB9_Msk (0x1U << CAN_F4R2_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F4R2_FB9 CAN_F4R2_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F4R2_FB10_Pos (10U)
-#define CAN_F4R2_FB10_Msk (0x1U << CAN_F4R2_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F4R2_FB10 CAN_F4R2_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F4R2_FB11_Pos (11U)
-#define CAN_F4R2_FB11_Msk (0x1U << CAN_F4R2_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F4R2_FB11 CAN_F4R2_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F4R2_FB12_Pos (12U)
-#define CAN_F4R2_FB12_Msk (0x1U << CAN_F4R2_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F4R2_FB12 CAN_F4R2_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F4R2_FB13_Pos (13U)
-#define CAN_F4R2_FB13_Msk (0x1U << CAN_F4R2_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F4R2_FB13 CAN_F4R2_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F4R2_FB14_Pos (14U)
-#define CAN_F4R2_FB14_Msk (0x1U << CAN_F4R2_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F4R2_FB14 CAN_F4R2_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F4R2_FB15_Pos (15U)
-#define CAN_F4R2_FB15_Msk (0x1U << CAN_F4R2_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F4R2_FB15 CAN_F4R2_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F4R2_FB16_Pos (16U)
-#define CAN_F4R2_FB16_Msk (0x1U << CAN_F4R2_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F4R2_FB16 CAN_F4R2_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F4R2_FB17_Pos (17U)
-#define CAN_F4R2_FB17_Msk (0x1U << CAN_F4R2_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F4R2_FB17 CAN_F4R2_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F4R2_FB18_Pos (18U)
-#define CAN_F4R2_FB18_Msk (0x1U << CAN_F4R2_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F4R2_FB18 CAN_F4R2_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F4R2_FB19_Pos (19U)
-#define CAN_F4R2_FB19_Msk (0x1U << CAN_F4R2_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F4R2_FB19 CAN_F4R2_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F4R2_FB20_Pos (20U)
-#define CAN_F4R2_FB20_Msk (0x1U << CAN_F4R2_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F4R2_FB20 CAN_F4R2_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F4R2_FB21_Pos (21U)
-#define CAN_F4R2_FB21_Msk (0x1U << CAN_F4R2_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F4R2_FB21 CAN_F4R2_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F4R2_FB22_Pos (22U)
-#define CAN_F4R2_FB22_Msk (0x1U << CAN_F4R2_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F4R2_FB22 CAN_F4R2_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F4R2_FB23_Pos (23U)
-#define CAN_F4R2_FB23_Msk (0x1U << CAN_F4R2_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F4R2_FB23 CAN_F4R2_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F4R2_FB24_Pos (24U)
-#define CAN_F4R2_FB24_Msk (0x1U << CAN_F4R2_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F4R2_FB24 CAN_F4R2_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F4R2_FB25_Pos (25U)
-#define CAN_F4R2_FB25_Msk (0x1U << CAN_F4R2_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F4R2_FB25 CAN_F4R2_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F4R2_FB26_Pos (26U)
-#define CAN_F4R2_FB26_Msk (0x1U << CAN_F4R2_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F4R2_FB26 CAN_F4R2_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F4R2_FB27_Pos (27U)
-#define CAN_F4R2_FB27_Msk (0x1U << CAN_F4R2_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F4R2_FB27 CAN_F4R2_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F4R2_FB28_Pos (28U)
-#define CAN_F4R2_FB28_Msk (0x1U << CAN_F4R2_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F4R2_FB28 CAN_F4R2_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F4R2_FB29_Pos (29U)
-#define CAN_F4R2_FB29_Msk (0x1U << CAN_F4R2_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F4R2_FB29 CAN_F4R2_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F4R2_FB30_Pos (30U)
-#define CAN_F4R2_FB30_Msk (0x1U << CAN_F4R2_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F4R2_FB30 CAN_F4R2_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F4R2_FB31_Pos (31U)
-#define CAN_F4R2_FB31_Msk (0x1U << CAN_F4R2_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F4R2_FB31 CAN_F4R2_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F5R2 register *******************/
-#define CAN_F5R2_FB0_Pos (0U)
-#define CAN_F5R2_FB0_Msk (0x1U << CAN_F5R2_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F5R2_FB0 CAN_F5R2_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F5R2_FB1_Pos (1U)
-#define CAN_F5R2_FB1_Msk (0x1U << CAN_F5R2_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F5R2_FB1 CAN_F5R2_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F5R2_FB2_Pos (2U)
-#define CAN_F5R2_FB2_Msk (0x1U << CAN_F5R2_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F5R2_FB2 CAN_F5R2_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F5R2_FB3_Pos (3U)
-#define CAN_F5R2_FB3_Msk (0x1U << CAN_F5R2_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F5R2_FB3 CAN_F5R2_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F5R2_FB4_Pos (4U)
-#define CAN_F5R2_FB4_Msk (0x1U << CAN_F5R2_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F5R2_FB4 CAN_F5R2_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F5R2_FB5_Pos (5U)
-#define CAN_F5R2_FB5_Msk (0x1U << CAN_F5R2_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F5R2_FB5 CAN_F5R2_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F5R2_FB6_Pos (6U)
-#define CAN_F5R2_FB6_Msk (0x1U << CAN_F5R2_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F5R2_FB6 CAN_F5R2_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F5R2_FB7_Pos (7U)
-#define CAN_F5R2_FB7_Msk (0x1U << CAN_F5R2_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F5R2_FB7 CAN_F5R2_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F5R2_FB8_Pos (8U)
-#define CAN_F5R2_FB8_Msk (0x1U << CAN_F5R2_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F5R2_FB8 CAN_F5R2_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F5R2_FB9_Pos (9U)
-#define CAN_F5R2_FB9_Msk (0x1U << CAN_F5R2_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F5R2_FB9 CAN_F5R2_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F5R2_FB10_Pos (10U)
-#define CAN_F5R2_FB10_Msk (0x1U << CAN_F5R2_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F5R2_FB10 CAN_F5R2_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F5R2_FB11_Pos (11U)
-#define CAN_F5R2_FB11_Msk (0x1U << CAN_F5R2_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F5R2_FB11 CAN_F5R2_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F5R2_FB12_Pos (12U)
-#define CAN_F5R2_FB12_Msk (0x1U << CAN_F5R2_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F5R2_FB12 CAN_F5R2_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F5R2_FB13_Pos (13U)
-#define CAN_F5R2_FB13_Msk (0x1U << CAN_F5R2_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F5R2_FB13 CAN_F5R2_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F5R2_FB14_Pos (14U)
-#define CAN_F5R2_FB14_Msk (0x1U << CAN_F5R2_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F5R2_FB14 CAN_F5R2_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F5R2_FB15_Pos (15U)
-#define CAN_F5R2_FB15_Msk (0x1U << CAN_F5R2_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F5R2_FB15 CAN_F5R2_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F5R2_FB16_Pos (16U)
-#define CAN_F5R2_FB16_Msk (0x1U << CAN_F5R2_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F5R2_FB16 CAN_F5R2_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F5R2_FB17_Pos (17U)
-#define CAN_F5R2_FB17_Msk (0x1U << CAN_F5R2_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F5R2_FB17 CAN_F5R2_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F5R2_FB18_Pos (18U)
-#define CAN_F5R2_FB18_Msk (0x1U << CAN_F5R2_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F5R2_FB18 CAN_F5R2_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F5R2_FB19_Pos (19U)
-#define CAN_F5R2_FB19_Msk (0x1U << CAN_F5R2_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F5R2_FB19 CAN_F5R2_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F5R2_FB20_Pos (20U)
-#define CAN_F5R2_FB20_Msk (0x1U << CAN_F5R2_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F5R2_FB20 CAN_F5R2_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F5R2_FB21_Pos (21U)
-#define CAN_F5R2_FB21_Msk (0x1U << CAN_F5R2_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F5R2_FB21 CAN_F5R2_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F5R2_FB22_Pos (22U)
-#define CAN_F5R2_FB22_Msk (0x1U << CAN_F5R2_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F5R2_FB22 CAN_F5R2_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F5R2_FB23_Pos (23U)
-#define CAN_F5R2_FB23_Msk (0x1U << CAN_F5R2_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F5R2_FB23 CAN_F5R2_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F5R2_FB24_Pos (24U)
-#define CAN_F5R2_FB24_Msk (0x1U << CAN_F5R2_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F5R2_FB24 CAN_F5R2_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F5R2_FB25_Pos (25U)
-#define CAN_F5R2_FB25_Msk (0x1U << CAN_F5R2_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F5R2_FB25 CAN_F5R2_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F5R2_FB26_Pos (26U)
-#define CAN_F5R2_FB26_Msk (0x1U << CAN_F5R2_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F5R2_FB26 CAN_F5R2_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F5R2_FB27_Pos (27U)
-#define CAN_F5R2_FB27_Msk (0x1U << CAN_F5R2_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F5R2_FB27 CAN_F5R2_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F5R2_FB28_Pos (28U)
-#define CAN_F5R2_FB28_Msk (0x1U << CAN_F5R2_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F5R2_FB28 CAN_F5R2_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F5R2_FB29_Pos (29U)
-#define CAN_F5R2_FB29_Msk (0x1U << CAN_F5R2_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F5R2_FB29 CAN_F5R2_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F5R2_FB30_Pos (30U)
-#define CAN_F5R2_FB30_Msk (0x1U << CAN_F5R2_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F5R2_FB30 CAN_F5R2_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F5R2_FB31_Pos (31U)
-#define CAN_F5R2_FB31_Msk (0x1U << CAN_F5R2_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F5R2_FB31 CAN_F5R2_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F6R2 register *******************/
-#define CAN_F6R2_FB0_Pos (0U)
-#define CAN_F6R2_FB0_Msk (0x1U << CAN_F6R2_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F6R2_FB0 CAN_F6R2_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F6R2_FB1_Pos (1U)
-#define CAN_F6R2_FB1_Msk (0x1U << CAN_F6R2_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F6R2_FB1 CAN_F6R2_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F6R2_FB2_Pos (2U)
-#define CAN_F6R2_FB2_Msk (0x1U << CAN_F6R2_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F6R2_FB2 CAN_F6R2_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F6R2_FB3_Pos (3U)
-#define CAN_F6R2_FB3_Msk (0x1U << CAN_F6R2_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F6R2_FB3 CAN_F6R2_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F6R2_FB4_Pos (4U)
-#define CAN_F6R2_FB4_Msk (0x1U << CAN_F6R2_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F6R2_FB4 CAN_F6R2_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F6R2_FB5_Pos (5U)
-#define CAN_F6R2_FB5_Msk (0x1U << CAN_F6R2_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F6R2_FB5 CAN_F6R2_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F6R2_FB6_Pos (6U)
-#define CAN_F6R2_FB6_Msk (0x1U << CAN_F6R2_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F6R2_FB6 CAN_F6R2_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F6R2_FB7_Pos (7U)
-#define CAN_F6R2_FB7_Msk (0x1U << CAN_F6R2_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F6R2_FB7 CAN_F6R2_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F6R2_FB8_Pos (8U)
-#define CAN_F6R2_FB8_Msk (0x1U << CAN_F6R2_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F6R2_FB8 CAN_F6R2_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F6R2_FB9_Pos (9U)
-#define CAN_F6R2_FB9_Msk (0x1U << CAN_F6R2_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F6R2_FB9 CAN_F6R2_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F6R2_FB10_Pos (10U)
-#define CAN_F6R2_FB10_Msk (0x1U << CAN_F6R2_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F6R2_FB10 CAN_F6R2_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F6R2_FB11_Pos (11U)
-#define CAN_F6R2_FB11_Msk (0x1U << CAN_F6R2_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F6R2_FB11 CAN_F6R2_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F6R2_FB12_Pos (12U)
-#define CAN_F6R2_FB12_Msk (0x1U << CAN_F6R2_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F6R2_FB12 CAN_F6R2_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F6R2_FB13_Pos (13U)
-#define CAN_F6R2_FB13_Msk (0x1U << CAN_F6R2_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F6R2_FB13 CAN_F6R2_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F6R2_FB14_Pos (14U)
-#define CAN_F6R2_FB14_Msk (0x1U << CAN_F6R2_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F6R2_FB14 CAN_F6R2_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F6R2_FB15_Pos (15U)
-#define CAN_F6R2_FB15_Msk (0x1U << CAN_F6R2_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F6R2_FB15 CAN_F6R2_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F6R2_FB16_Pos (16U)
-#define CAN_F6R2_FB16_Msk (0x1U << CAN_F6R2_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F6R2_FB16 CAN_F6R2_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F6R2_FB17_Pos (17U)
-#define CAN_F6R2_FB17_Msk (0x1U << CAN_F6R2_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F6R2_FB17 CAN_F6R2_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F6R2_FB18_Pos (18U)
-#define CAN_F6R2_FB18_Msk (0x1U << CAN_F6R2_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F6R2_FB18 CAN_F6R2_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F6R2_FB19_Pos (19U)
-#define CAN_F6R2_FB19_Msk (0x1U << CAN_F6R2_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F6R2_FB19 CAN_F6R2_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F6R2_FB20_Pos (20U)
-#define CAN_F6R2_FB20_Msk (0x1U << CAN_F6R2_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F6R2_FB20 CAN_F6R2_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F6R2_FB21_Pos (21U)
-#define CAN_F6R2_FB21_Msk (0x1U << CAN_F6R2_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F6R2_FB21 CAN_F6R2_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F6R2_FB22_Pos (22U)
-#define CAN_F6R2_FB22_Msk (0x1U << CAN_F6R2_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F6R2_FB22 CAN_F6R2_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F6R2_FB23_Pos (23U)
-#define CAN_F6R2_FB23_Msk (0x1U << CAN_F6R2_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F6R2_FB23 CAN_F6R2_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F6R2_FB24_Pos (24U)
-#define CAN_F6R2_FB24_Msk (0x1U << CAN_F6R2_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F6R2_FB24 CAN_F6R2_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F6R2_FB25_Pos (25U)
-#define CAN_F6R2_FB25_Msk (0x1U << CAN_F6R2_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F6R2_FB25 CAN_F6R2_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F6R2_FB26_Pos (26U)
-#define CAN_F6R2_FB26_Msk (0x1U << CAN_F6R2_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F6R2_FB26 CAN_F6R2_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F6R2_FB27_Pos (27U)
-#define CAN_F6R2_FB27_Msk (0x1U << CAN_F6R2_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F6R2_FB27 CAN_F6R2_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F6R2_FB28_Pos (28U)
-#define CAN_F6R2_FB28_Msk (0x1U << CAN_F6R2_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F6R2_FB28 CAN_F6R2_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F6R2_FB29_Pos (29U)
-#define CAN_F6R2_FB29_Msk (0x1U << CAN_F6R2_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F6R2_FB29 CAN_F6R2_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F6R2_FB30_Pos (30U)
-#define CAN_F6R2_FB30_Msk (0x1U << CAN_F6R2_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F6R2_FB30 CAN_F6R2_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F6R2_FB31_Pos (31U)
-#define CAN_F6R2_FB31_Msk (0x1U << CAN_F6R2_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F6R2_FB31 CAN_F6R2_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F7R2 register *******************/
-#define CAN_F7R2_FB0_Pos (0U)
-#define CAN_F7R2_FB0_Msk (0x1U << CAN_F7R2_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F7R2_FB0 CAN_F7R2_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F7R2_FB1_Pos (1U)
-#define CAN_F7R2_FB1_Msk (0x1U << CAN_F7R2_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F7R2_FB1 CAN_F7R2_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F7R2_FB2_Pos (2U)
-#define CAN_F7R2_FB2_Msk (0x1U << CAN_F7R2_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F7R2_FB2 CAN_F7R2_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F7R2_FB3_Pos (3U)
-#define CAN_F7R2_FB3_Msk (0x1U << CAN_F7R2_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F7R2_FB3 CAN_F7R2_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F7R2_FB4_Pos (4U)
-#define CAN_F7R2_FB4_Msk (0x1U << CAN_F7R2_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F7R2_FB4 CAN_F7R2_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F7R2_FB5_Pos (5U)
-#define CAN_F7R2_FB5_Msk (0x1U << CAN_F7R2_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F7R2_FB5 CAN_F7R2_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F7R2_FB6_Pos (6U)
-#define CAN_F7R2_FB6_Msk (0x1U << CAN_F7R2_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F7R2_FB6 CAN_F7R2_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F7R2_FB7_Pos (7U)
-#define CAN_F7R2_FB7_Msk (0x1U << CAN_F7R2_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F7R2_FB7 CAN_F7R2_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F7R2_FB8_Pos (8U)
-#define CAN_F7R2_FB8_Msk (0x1U << CAN_F7R2_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F7R2_FB8 CAN_F7R2_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F7R2_FB9_Pos (9U)
-#define CAN_F7R2_FB9_Msk (0x1U << CAN_F7R2_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F7R2_FB9 CAN_F7R2_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F7R2_FB10_Pos (10U)
-#define CAN_F7R2_FB10_Msk (0x1U << CAN_F7R2_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F7R2_FB10 CAN_F7R2_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F7R2_FB11_Pos (11U)
-#define CAN_F7R2_FB11_Msk (0x1U << CAN_F7R2_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F7R2_FB11 CAN_F7R2_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F7R2_FB12_Pos (12U)
-#define CAN_F7R2_FB12_Msk (0x1U << CAN_F7R2_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F7R2_FB12 CAN_F7R2_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F7R2_FB13_Pos (13U)
-#define CAN_F7R2_FB13_Msk (0x1U << CAN_F7R2_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F7R2_FB13 CAN_F7R2_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F7R2_FB14_Pos (14U)
-#define CAN_F7R2_FB14_Msk (0x1U << CAN_F7R2_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F7R2_FB14 CAN_F7R2_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F7R2_FB15_Pos (15U)
-#define CAN_F7R2_FB15_Msk (0x1U << CAN_F7R2_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F7R2_FB15 CAN_F7R2_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F7R2_FB16_Pos (16U)
-#define CAN_F7R2_FB16_Msk (0x1U << CAN_F7R2_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F7R2_FB16 CAN_F7R2_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F7R2_FB17_Pos (17U)
-#define CAN_F7R2_FB17_Msk (0x1U << CAN_F7R2_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F7R2_FB17 CAN_F7R2_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F7R2_FB18_Pos (18U)
-#define CAN_F7R2_FB18_Msk (0x1U << CAN_F7R2_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F7R2_FB18 CAN_F7R2_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F7R2_FB19_Pos (19U)
-#define CAN_F7R2_FB19_Msk (0x1U << CAN_F7R2_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F7R2_FB19 CAN_F7R2_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F7R2_FB20_Pos (20U)
-#define CAN_F7R2_FB20_Msk (0x1U << CAN_F7R2_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F7R2_FB20 CAN_F7R2_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F7R2_FB21_Pos (21U)
-#define CAN_F7R2_FB21_Msk (0x1U << CAN_F7R2_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F7R2_FB21 CAN_F7R2_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F7R2_FB22_Pos (22U)
-#define CAN_F7R2_FB22_Msk (0x1U << CAN_F7R2_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F7R2_FB22 CAN_F7R2_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F7R2_FB23_Pos (23U)
-#define CAN_F7R2_FB23_Msk (0x1U << CAN_F7R2_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F7R2_FB23 CAN_F7R2_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F7R2_FB24_Pos (24U)
-#define CAN_F7R2_FB24_Msk (0x1U << CAN_F7R2_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F7R2_FB24 CAN_F7R2_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F7R2_FB25_Pos (25U)
-#define CAN_F7R2_FB25_Msk (0x1U << CAN_F7R2_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F7R2_FB25 CAN_F7R2_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F7R2_FB26_Pos (26U)
-#define CAN_F7R2_FB26_Msk (0x1U << CAN_F7R2_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F7R2_FB26 CAN_F7R2_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F7R2_FB27_Pos (27U)
-#define CAN_F7R2_FB27_Msk (0x1U << CAN_F7R2_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F7R2_FB27 CAN_F7R2_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F7R2_FB28_Pos (28U)
-#define CAN_F7R2_FB28_Msk (0x1U << CAN_F7R2_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F7R2_FB28 CAN_F7R2_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F7R2_FB29_Pos (29U)
-#define CAN_F7R2_FB29_Msk (0x1U << CAN_F7R2_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F7R2_FB29 CAN_F7R2_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F7R2_FB30_Pos (30U)
-#define CAN_F7R2_FB30_Msk (0x1U << CAN_F7R2_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F7R2_FB30 CAN_F7R2_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F7R2_FB31_Pos (31U)
-#define CAN_F7R2_FB31_Msk (0x1U << CAN_F7R2_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F7R2_FB31 CAN_F7R2_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F8R2 register *******************/
-#define CAN_F8R2_FB0_Pos (0U)
-#define CAN_F8R2_FB0_Msk (0x1U << CAN_F8R2_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F8R2_FB0 CAN_F8R2_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F8R2_FB1_Pos (1U)
-#define CAN_F8R2_FB1_Msk (0x1U << CAN_F8R2_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F8R2_FB1 CAN_F8R2_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F8R2_FB2_Pos (2U)
-#define CAN_F8R2_FB2_Msk (0x1U << CAN_F8R2_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F8R2_FB2 CAN_F8R2_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F8R2_FB3_Pos (3U)
-#define CAN_F8R2_FB3_Msk (0x1U << CAN_F8R2_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F8R2_FB3 CAN_F8R2_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F8R2_FB4_Pos (4U)
-#define CAN_F8R2_FB4_Msk (0x1U << CAN_F8R2_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F8R2_FB4 CAN_F8R2_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F8R2_FB5_Pos (5U)
-#define CAN_F8R2_FB5_Msk (0x1U << CAN_F8R2_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F8R2_FB5 CAN_F8R2_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F8R2_FB6_Pos (6U)
-#define CAN_F8R2_FB6_Msk (0x1U << CAN_F8R2_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F8R2_FB6 CAN_F8R2_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F8R2_FB7_Pos (7U)
-#define CAN_F8R2_FB7_Msk (0x1U << CAN_F8R2_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F8R2_FB7 CAN_F8R2_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F8R2_FB8_Pos (8U)
-#define CAN_F8R2_FB8_Msk (0x1U << CAN_F8R2_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F8R2_FB8 CAN_F8R2_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F8R2_FB9_Pos (9U)
-#define CAN_F8R2_FB9_Msk (0x1U << CAN_F8R2_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F8R2_FB9 CAN_F8R2_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F8R2_FB10_Pos (10U)
-#define CAN_F8R2_FB10_Msk (0x1U << CAN_F8R2_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F8R2_FB10 CAN_F8R2_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F8R2_FB11_Pos (11U)
-#define CAN_F8R2_FB11_Msk (0x1U << CAN_F8R2_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F8R2_FB11 CAN_F8R2_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F8R2_FB12_Pos (12U)
-#define CAN_F8R2_FB12_Msk (0x1U << CAN_F8R2_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F8R2_FB12 CAN_F8R2_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F8R2_FB13_Pos (13U)
-#define CAN_F8R2_FB13_Msk (0x1U << CAN_F8R2_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F8R2_FB13 CAN_F8R2_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F8R2_FB14_Pos (14U)
-#define CAN_F8R2_FB14_Msk (0x1U << CAN_F8R2_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F8R2_FB14 CAN_F8R2_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F8R2_FB15_Pos (15U)
-#define CAN_F8R2_FB15_Msk (0x1U << CAN_F8R2_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F8R2_FB15 CAN_F8R2_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F8R2_FB16_Pos (16U)
-#define CAN_F8R2_FB16_Msk (0x1U << CAN_F8R2_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F8R2_FB16 CAN_F8R2_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F8R2_FB17_Pos (17U)
-#define CAN_F8R2_FB17_Msk (0x1U << CAN_F8R2_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F8R2_FB17 CAN_F8R2_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F8R2_FB18_Pos (18U)
-#define CAN_F8R2_FB18_Msk (0x1U << CAN_F8R2_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F8R2_FB18 CAN_F8R2_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F8R2_FB19_Pos (19U)
-#define CAN_F8R2_FB19_Msk (0x1U << CAN_F8R2_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F8R2_FB19 CAN_F8R2_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F8R2_FB20_Pos (20U)
-#define CAN_F8R2_FB20_Msk (0x1U << CAN_F8R2_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F8R2_FB20 CAN_F8R2_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F8R2_FB21_Pos (21U)
-#define CAN_F8R2_FB21_Msk (0x1U << CAN_F8R2_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F8R2_FB21 CAN_F8R2_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F8R2_FB22_Pos (22U)
-#define CAN_F8R2_FB22_Msk (0x1U << CAN_F8R2_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F8R2_FB22 CAN_F8R2_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F8R2_FB23_Pos (23U)
-#define CAN_F8R2_FB23_Msk (0x1U << CAN_F8R2_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F8R2_FB23 CAN_F8R2_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F8R2_FB24_Pos (24U)
-#define CAN_F8R2_FB24_Msk (0x1U << CAN_F8R2_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F8R2_FB24 CAN_F8R2_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F8R2_FB25_Pos (25U)
-#define CAN_F8R2_FB25_Msk (0x1U << CAN_F8R2_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F8R2_FB25 CAN_F8R2_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F8R2_FB26_Pos (26U)
-#define CAN_F8R2_FB26_Msk (0x1U << CAN_F8R2_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F8R2_FB26 CAN_F8R2_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F8R2_FB27_Pos (27U)
-#define CAN_F8R2_FB27_Msk (0x1U << CAN_F8R2_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F8R2_FB27 CAN_F8R2_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F8R2_FB28_Pos (28U)
-#define CAN_F8R2_FB28_Msk (0x1U << CAN_F8R2_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F8R2_FB28 CAN_F8R2_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F8R2_FB29_Pos (29U)
-#define CAN_F8R2_FB29_Msk (0x1U << CAN_F8R2_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F8R2_FB29 CAN_F8R2_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F8R2_FB30_Pos (30U)
-#define CAN_F8R2_FB30_Msk (0x1U << CAN_F8R2_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F8R2_FB30 CAN_F8R2_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F8R2_FB31_Pos (31U)
-#define CAN_F8R2_FB31_Msk (0x1U << CAN_F8R2_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F8R2_FB31 CAN_F8R2_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F9R2 register *******************/
-#define CAN_F9R2_FB0_Pos (0U)
-#define CAN_F9R2_FB0_Msk (0x1U << CAN_F9R2_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F9R2_FB0 CAN_F9R2_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F9R2_FB1_Pos (1U)
-#define CAN_F9R2_FB1_Msk (0x1U << CAN_F9R2_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F9R2_FB1 CAN_F9R2_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F9R2_FB2_Pos (2U)
-#define CAN_F9R2_FB2_Msk (0x1U << CAN_F9R2_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F9R2_FB2 CAN_F9R2_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F9R2_FB3_Pos (3U)
-#define CAN_F9R2_FB3_Msk (0x1U << CAN_F9R2_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F9R2_FB3 CAN_F9R2_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F9R2_FB4_Pos (4U)
-#define CAN_F9R2_FB4_Msk (0x1U << CAN_F9R2_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F9R2_FB4 CAN_F9R2_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F9R2_FB5_Pos (5U)
-#define CAN_F9R2_FB5_Msk (0x1U << CAN_F9R2_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F9R2_FB5 CAN_F9R2_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F9R2_FB6_Pos (6U)
-#define CAN_F9R2_FB6_Msk (0x1U << CAN_F9R2_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F9R2_FB6 CAN_F9R2_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F9R2_FB7_Pos (7U)
-#define CAN_F9R2_FB7_Msk (0x1U << CAN_F9R2_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F9R2_FB7 CAN_F9R2_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F9R2_FB8_Pos (8U)
-#define CAN_F9R2_FB8_Msk (0x1U << CAN_F9R2_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F9R2_FB8 CAN_F9R2_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F9R2_FB9_Pos (9U)
-#define CAN_F9R2_FB9_Msk (0x1U << CAN_F9R2_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F9R2_FB9 CAN_F9R2_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F9R2_FB10_Pos (10U)
-#define CAN_F9R2_FB10_Msk (0x1U << CAN_F9R2_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F9R2_FB10 CAN_F9R2_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F9R2_FB11_Pos (11U)
-#define CAN_F9R2_FB11_Msk (0x1U << CAN_F9R2_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F9R2_FB11 CAN_F9R2_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F9R2_FB12_Pos (12U)
-#define CAN_F9R2_FB12_Msk (0x1U << CAN_F9R2_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F9R2_FB12 CAN_F9R2_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F9R2_FB13_Pos (13U)
-#define CAN_F9R2_FB13_Msk (0x1U << CAN_F9R2_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F9R2_FB13 CAN_F9R2_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F9R2_FB14_Pos (14U)
-#define CAN_F9R2_FB14_Msk (0x1U << CAN_F9R2_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F9R2_FB14 CAN_F9R2_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F9R2_FB15_Pos (15U)
-#define CAN_F9R2_FB15_Msk (0x1U << CAN_F9R2_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F9R2_FB15 CAN_F9R2_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F9R2_FB16_Pos (16U)
-#define CAN_F9R2_FB16_Msk (0x1U << CAN_F9R2_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F9R2_FB16 CAN_F9R2_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F9R2_FB17_Pos (17U)
-#define CAN_F9R2_FB17_Msk (0x1U << CAN_F9R2_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F9R2_FB17 CAN_F9R2_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F9R2_FB18_Pos (18U)
-#define CAN_F9R2_FB18_Msk (0x1U << CAN_F9R2_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F9R2_FB18 CAN_F9R2_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F9R2_FB19_Pos (19U)
-#define CAN_F9R2_FB19_Msk (0x1U << CAN_F9R2_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F9R2_FB19 CAN_F9R2_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F9R2_FB20_Pos (20U)
-#define CAN_F9R2_FB20_Msk (0x1U << CAN_F9R2_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F9R2_FB20 CAN_F9R2_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F9R2_FB21_Pos (21U)
-#define CAN_F9R2_FB21_Msk (0x1U << CAN_F9R2_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F9R2_FB21 CAN_F9R2_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F9R2_FB22_Pos (22U)
-#define CAN_F9R2_FB22_Msk (0x1U << CAN_F9R2_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F9R2_FB22 CAN_F9R2_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F9R2_FB23_Pos (23U)
-#define CAN_F9R2_FB23_Msk (0x1U << CAN_F9R2_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F9R2_FB23 CAN_F9R2_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F9R2_FB24_Pos (24U)
-#define CAN_F9R2_FB24_Msk (0x1U << CAN_F9R2_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F9R2_FB24 CAN_F9R2_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F9R2_FB25_Pos (25U)
-#define CAN_F9R2_FB25_Msk (0x1U << CAN_F9R2_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F9R2_FB25 CAN_F9R2_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F9R2_FB26_Pos (26U)
-#define CAN_F9R2_FB26_Msk (0x1U << CAN_F9R2_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F9R2_FB26 CAN_F9R2_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F9R2_FB27_Pos (27U)
-#define CAN_F9R2_FB27_Msk (0x1U << CAN_F9R2_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F9R2_FB27 CAN_F9R2_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F9R2_FB28_Pos (28U)
-#define CAN_F9R2_FB28_Msk (0x1U << CAN_F9R2_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F9R2_FB28 CAN_F9R2_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F9R2_FB29_Pos (29U)
-#define CAN_F9R2_FB29_Msk (0x1U << CAN_F9R2_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F9R2_FB29 CAN_F9R2_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F9R2_FB30_Pos (30U)
-#define CAN_F9R2_FB30_Msk (0x1U << CAN_F9R2_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F9R2_FB30 CAN_F9R2_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F9R2_FB31_Pos (31U)
-#define CAN_F9R2_FB31_Msk (0x1U << CAN_F9R2_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F9R2_FB31 CAN_F9R2_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F10R2 register ******************/
-#define CAN_F10R2_FB0_Pos (0U)
-#define CAN_F10R2_FB0_Msk (0x1U << CAN_F10R2_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F10R2_FB0 CAN_F10R2_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F10R2_FB1_Pos (1U)
-#define CAN_F10R2_FB1_Msk (0x1U << CAN_F10R2_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F10R2_FB1 CAN_F10R2_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F10R2_FB2_Pos (2U)
-#define CAN_F10R2_FB2_Msk (0x1U << CAN_F10R2_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F10R2_FB2 CAN_F10R2_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F10R2_FB3_Pos (3U)
-#define CAN_F10R2_FB3_Msk (0x1U << CAN_F10R2_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F10R2_FB3 CAN_F10R2_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F10R2_FB4_Pos (4U)
-#define CAN_F10R2_FB4_Msk (0x1U << CAN_F10R2_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F10R2_FB4 CAN_F10R2_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F10R2_FB5_Pos (5U)
-#define CAN_F10R2_FB5_Msk (0x1U << CAN_F10R2_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F10R2_FB5 CAN_F10R2_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F10R2_FB6_Pos (6U)
-#define CAN_F10R2_FB6_Msk (0x1U << CAN_F10R2_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F10R2_FB6 CAN_F10R2_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F10R2_FB7_Pos (7U)
-#define CAN_F10R2_FB7_Msk (0x1U << CAN_F10R2_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F10R2_FB7 CAN_F10R2_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F10R2_FB8_Pos (8U)
-#define CAN_F10R2_FB8_Msk (0x1U << CAN_F10R2_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F10R2_FB8 CAN_F10R2_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F10R2_FB9_Pos (9U)
-#define CAN_F10R2_FB9_Msk (0x1U << CAN_F10R2_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F10R2_FB9 CAN_F10R2_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F10R2_FB10_Pos (10U)
-#define CAN_F10R2_FB10_Msk (0x1U << CAN_F10R2_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F10R2_FB10 CAN_F10R2_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F10R2_FB11_Pos (11U)
-#define CAN_F10R2_FB11_Msk (0x1U << CAN_F10R2_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F10R2_FB11 CAN_F10R2_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F10R2_FB12_Pos (12U)
-#define CAN_F10R2_FB12_Msk (0x1U << CAN_F10R2_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F10R2_FB12 CAN_F10R2_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F10R2_FB13_Pos (13U)
-#define CAN_F10R2_FB13_Msk (0x1U << CAN_F10R2_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F10R2_FB13 CAN_F10R2_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F10R2_FB14_Pos (14U)
-#define CAN_F10R2_FB14_Msk (0x1U << CAN_F10R2_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F10R2_FB14 CAN_F10R2_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F10R2_FB15_Pos (15U)
-#define CAN_F10R2_FB15_Msk (0x1U << CAN_F10R2_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F10R2_FB15 CAN_F10R2_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F10R2_FB16_Pos (16U)
-#define CAN_F10R2_FB16_Msk (0x1U << CAN_F10R2_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F10R2_FB16 CAN_F10R2_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F10R2_FB17_Pos (17U)
-#define CAN_F10R2_FB17_Msk (0x1U << CAN_F10R2_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F10R2_FB17 CAN_F10R2_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F10R2_FB18_Pos (18U)
-#define CAN_F10R2_FB18_Msk (0x1U << CAN_F10R2_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F10R2_FB18 CAN_F10R2_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F10R2_FB19_Pos (19U)
-#define CAN_F10R2_FB19_Msk (0x1U << CAN_F10R2_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F10R2_FB19 CAN_F10R2_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F10R2_FB20_Pos (20U)
-#define CAN_F10R2_FB20_Msk (0x1U << CAN_F10R2_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F10R2_FB20 CAN_F10R2_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F10R2_FB21_Pos (21U)
-#define CAN_F10R2_FB21_Msk (0x1U << CAN_F10R2_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F10R2_FB21 CAN_F10R2_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F10R2_FB22_Pos (22U)
-#define CAN_F10R2_FB22_Msk (0x1U << CAN_F10R2_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F10R2_FB22 CAN_F10R2_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F10R2_FB23_Pos (23U)
-#define CAN_F10R2_FB23_Msk (0x1U << CAN_F10R2_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F10R2_FB23 CAN_F10R2_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F10R2_FB24_Pos (24U)
-#define CAN_F10R2_FB24_Msk (0x1U << CAN_F10R2_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F10R2_FB24 CAN_F10R2_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F10R2_FB25_Pos (25U)
-#define CAN_F10R2_FB25_Msk (0x1U << CAN_F10R2_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F10R2_FB25 CAN_F10R2_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F10R2_FB26_Pos (26U)
-#define CAN_F10R2_FB26_Msk (0x1U << CAN_F10R2_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F10R2_FB26 CAN_F10R2_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F10R2_FB27_Pos (27U)
-#define CAN_F10R2_FB27_Msk (0x1U << CAN_F10R2_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F10R2_FB27 CAN_F10R2_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F10R2_FB28_Pos (28U)
-#define CAN_F10R2_FB28_Msk (0x1U << CAN_F10R2_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F10R2_FB28 CAN_F10R2_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F10R2_FB29_Pos (29U)
-#define CAN_F10R2_FB29_Msk (0x1U << CAN_F10R2_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F10R2_FB29 CAN_F10R2_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F10R2_FB30_Pos (30U)
-#define CAN_F10R2_FB30_Msk (0x1U << CAN_F10R2_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F10R2_FB30 CAN_F10R2_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F10R2_FB31_Pos (31U)
-#define CAN_F10R2_FB31_Msk (0x1U << CAN_F10R2_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F10R2_FB31 CAN_F10R2_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F11R2 register ******************/
-#define CAN_F11R2_FB0_Pos (0U)
-#define CAN_F11R2_FB0_Msk (0x1U << CAN_F11R2_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F11R2_FB0 CAN_F11R2_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F11R2_FB1_Pos (1U)
-#define CAN_F11R2_FB1_Msk (0x1U << CAN_F11R2_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F11R2_FB1 CAN_F11R2_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F11R2_FB2_Pos (2U)
-#define CAN_F11R2_FB2_Msk (0x1U << CAN_F11R2_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F11R2_FB2 CAN_F11R2_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F11R2_FB3_Pos (3U)
-#define CAN_F11R2_FB3_Msk (0x1U << CAN_F11R2_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F11R2_FB3 CAN_F11R2_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F11R2_FB4_Pos (4U)
-#define CAN_F11R2_FB4_Msk (0x1U << CAN_F11R2_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F11R2_FB4 CAN_F11R2_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F11R2_FB5_Pos (5U)
-#define CAN_F11R2_FB5_Msk (0x1U << CAN_F11R2_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F11R2_FB5 CAN_F11R2_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F11R2_FB6_Pos (6U)
-#define CAN_F11R2_FB6_Msk (0x1U << CAN_F11R2_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F11R2_FB6 CAN_F11R2_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F11R2_FB7_Pos (7U)
-#define CAN_F11R2_FB7_Msk (0x1U << CAN_F11R2_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F11R2_FB7 CAN_F11R2_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F11R2_FB8_Pos (8U)
-#define CAN_F11R2_FB8_Msk (0x1U << CAN_F11R2_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F11R2_FB8 CAN_F11R2_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F11R2_FB9_Pos (9U)
-#define CAN_F11R2_FB9_Msk (0x1U << CAN_F11R2_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F11R2_FB9 CAN_F11R2_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F11R2_FB10_Pos (10U)
-#define CAN_F11R2_FB10_Msk (0x1U << CAN_F11R2_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F11R2_FB10 CAN_F11R2_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F11R2_FB11_Pos (11U)
-#define CAN_F11R2_FB11_Msk (0x1U << CAN_F11R2_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F11R2_FB11 CAN_F11R2_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F11R2_FB12_Pos (12U)
-#define CAN_F11R2_FB12_Msk (0x1U << CAN_F11R2_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F11R2_FB12 CAN_F11R2_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F11R2_FB13_Pos (13U)
-#define CAN_F11R2_FB13_Msk (0x1U << CAN_F11R2_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F11R2_FB13 CAN_F11R2_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F11R2_FB14_Pos (14U)
-#define CAN_F11R2_FB14_Msk (0x1U << CAN_F11R2_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F11R2_FB14 CAN_F11R2_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F11R2_FB15_Pos (15U)
-#define CAN_F11R2_FB15_Msk (0x1U << CAN_F11R2_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F11R2_FB15 CAN_F11R2_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F11R2_FB16_Pos (16U)
-#define CAN_F11R2_FB16_Msk (0x1U << CAN_F11R2_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F11R2_FB16 CAN_F11R2_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F11R2_FB17_Pos (17U)
-#define CAN_F11R2_FB17_Msk (0x1U << CAN_F11R2_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F11R2_FB17 CAN_F11R2_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F11R2_FB18_Pos (18U)
-#define CAN_F11R2_FB18_Msk (0x1U << CAN_F11R2_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F11R2_FB18 CAN_F11R2_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F11R2_FB19_Pos (19U)
-#define CAN_F11R2_FB19_Msk (0x1U << CAN_F11R2_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F11R2_FB19 CAN_F11R2_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F11R2_FB20_Pos (20U)
-#define CAN_F11R2_FB20_Msk (0x1U << CAN_F11R2_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F11R2_FB20 CAN_F11R2_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F11R2_FB21_Pos (21U)
-#define CAN_F11R2_FB21_Msk (0x1U << CAN_F11R2_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F11R2_FB21 CAN_F11R2_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F11R2_FB22_Pos (22U)
-#define CAN_F11R2_FB22_Msk (0x1U << CAN_F11R2_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F11R2_FB22 CAN_F11R2_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F11R2_FB23_Pos (23U)
-#define CAN_F11R2_FB23_Msk (0x1U << CAN_F11R2_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F11R2_FB23 CAN_F11R2_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F11R2_FB24_Pos (24U)
-#define CAN_F11R2_FB24_Msk (0x1U << CAN_F11R2_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F11R2_FB24 CAN_F11R2_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F11R2_FB25_Pos (25U)
-#define CAN_F11R2_FB25_Msk (0x1U << CAN_F11R2_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F11R2_FB25 CAN_F11R2_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F11R2_FB26_Pos (26U)
-#define CAN_F11R2_FB26_Msk (0x1U << CAN_F11R2_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F11R2_FB26 CAN_F11R2_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F11R2_FB27_Pos (27U)
-#define CAN_F11R2_FB27_Msk (0x1U << CAN_F11R2_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F11R2_FB27 CAN_F11R2_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F11R2_FB28_Pos (28U)
-#define CAN_F11R2_FB28_Msk (0x1U << CAN_F11R2_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F11R2_FB28 CAN_F11R2_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F11R2_FB29_Pos (29U)
-#define CAN_F11R2_FB29_Msk (0x1U << CAN_F11R2_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F11R2_FB29 CAN_F11R2_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F11R2_FB30_Pos (30U)
-#define CAN_F11R2_FB30_Msk (0x1U << CAN_F11R2_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F11R2_FB30 CAN_F11R2_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F11R2_FB31_Pos (31U)
-#define CAN_F11R2_FB31_Msk (0x1U << CAN_F11R2_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F11R2_FB31 CAN_F11R2_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F12R2 register ******************/
-#define CAN_F12R2_FB0_Pos (0U)
-#define CAN_F12R2_FB0_Msk (0x1U << CAN_F12R2_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F12R2_FB0 CAN_F12R2_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F12R2_FB1_Pos (1U)
-#define CAN_F12R2_FB1_Msk (0x1U << CAN_F12R2_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F12R2_FB1 CAN_F12R2_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F12R2_FB2_Pos (2U)
-#define CAN_F12R2_FB2_Msk (0x1U << CAN_F12R2_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F12R2_FB2 CAN_F12R2_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F12R2_FB3_Pos (3U)
-#define CAN_F12R2_FB3_Msk (0x1U << CAN_F12R2_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F12R2_FB3 CAN_F12R2_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F12R2_FB4_Pos (4U)
-#define CAN_F12R2_FB4_Msk (0x1U << CAN_F12R2_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F12R2_FB4 CAN_F12R2_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F12R2_FB5_Pos (5U)
-#define CAN_F12R2_FB5_Msk (0x1U << CAN_F12R2_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F12R2_FB5 CAN_F12R2_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F12R2_FB6_Pos (6U)
-#define CAN_F12R2_FB6_Msk (0x1U << CAN_F12R2_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F12R2_FB6 CAN_F12R2_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F12R2_FB7_Pos (7U)
-#define CAN_F12R2_FB7_Msk (0x1U << CAN_F12R2_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F12R2_FB7 CAN_F12R2_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F12R2_FB8_Pos (8U)
-#define CAN_F12R2_FB8_Msk (0x1U << CAN_F12R2_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F12R2_FB8 CAN_F12R2_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F12R2_FB9_Pos (9U)
-#define CAN_F12R2_FB9_Msk (0x1U << CAN_F12R2_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F12R2_FB9 CAN_F12R2_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F12R2_FB10_Pos (10U)
-#define CAN_F12R2_FB10_Msk (0x1U << CAN_F12R2_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F12R2_FB10 CAN_F12R2_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F12R2_FB11_Pos (11U)
-#define CAN_F12R2_FB11_Msk (0x1U << CAN_F12R2_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F12R2_FB11 CAN_F12R2_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F12R2_FB12_Pos (12U)
-#define CAN_F12R2_FB12_Msk (0x1U << CAN_F12R2_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F12R2_FB12 CAN_F12R2_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F12R2_FB13_Pos (13U)
-#define CAN_F12R2_FB13_Msk (0x1U << CAN_F12R2_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F12R2_FB13 CAN_F12R2_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F12R2_FB14_Pos (14U)
-#define CAN_F12R2_FB14_Msk (0x1U << CAN_F12R2_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F12R2_FB14 CAN_F12R2_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F12R2_FB15_Pos (15U)
-#define CAN_F12R2_FB15_Msk (0x1U << CAN_F12R2_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F12R2_FB15 CAN_F12R2_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F12R2_FB16_Pos (16U)
-#define CAN_F12R2_FB16_Msk (0x1U << CAN_F12R2_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F12R2_FB16 CAN_F12R2_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F12R2_FB17_Pos (17U)
-#define CAN_F12R2_FB17_Msk (0x1U << CAN_F12R2_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F12R2_FB17 CAN_F12R2_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F12R2_FB18_Pos (18U)
-#define CAN_F12R2_FB18_Msk (0x1U << CAN_F12R2_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F12R2_FB18 CAN_F12R2_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F12R2_FB19_Pos (19U)
-#define CAN_F12R2_FB19_Msk (0x1U << CAN_F12R2_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F12R2_FB19 CAN_F12R2_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F12R2_FB20_Pos (20U)
-#define CAN_F12R2_FB20_Msk (0x1U << CAN_F12R2_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F12R2_FB20 CAN_F12R2_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F12R2_FB21_Pos (21U)
-#define CAN_F12R2_FB21_Msk (0x1U << CAN_F12R2_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F12R2_FB21 CAN_F12R2_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F12R2_FB22_Pos (22U)
-#define CAN_F12R2_FB22_Msk (0x1U << CAN_F12R2_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F12R2_FB22 CAN_F12R2_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F12R2_FB23_Pos (23U)
-#define CAN_F12R2_FB23_Msk (0x1U << CAN_F12R2_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F12R2_FB23 CAN_F12R2_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F12R2_FB24_Pos (24U)
-#define CAN_F12R2_FB24_Msk (0x1U << CAN_F12R2_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F12R2_FB24 CAN_F12R2_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F12R2_FB25_Pos (25U)
-#define CAN_F12R2_FB25_Msk (0x1U << CAN_F12R2_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F12R2_FB25 CAN_F12R2_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F12R2_FB26_Pos (26U)
-#define CAN_F12R2_FB26_Msk (0x1U << CAN_F12R2_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F12R2_FB26 CAN_F12R2_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F12R2_FB27_Pos (27U)
-#define CAN_F12R2_FB27_Msk (0x1U << CAN_F12R2_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F12R2_FB27 CAN_F12R2_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F12R2_FB28_Pos (28U)
-#define CAN_F12R2_FB28_Msk (0x1U << CAN_F12R2_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F12R2_FB28 CAN_F12R2_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F12R2_FB29_Pos (29U)
-#define CAN_F12R2_FB29_Msk (0x1U << CAN_F12R2_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F12R2_FB29 CAN_F12R2_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F12R2_FB30_Pos (30U)
-#define CAN_F12R2_FB30_Msk (0x1U << CAN_F12R2_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F12R2_FB30 CAN_F12R2_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F12R2_FB31_Pos (31U)
-#define CAN_F12R2_FB31_Msk (0x1U << CAN_F12R2_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F12R2_FB31 CAN_F12R2_FB31_Msk /*!< Filter bit 31 */
-
-/******************* Bit definition for CAN_F13R2 register ******************/
-#define CAN_F13R2_FB0_Pos (0U)
-#define CAN_F13R2_FB0_Msk (0x1U << CAN_F13R2_FB0_Pos) /*!< 0x00000001 */
-#define CAN_F13R2_FB0 CAN_F13R2_FB0_Msk /*!< Filter bit 0 */
-#define CAN_F13R2_FB1_Pos (1U)
-#define CAN_F13R2_FB1_Msk (0x1U << CAN_F13R2_FB1_Pos) /*!< 0x00000002 */
-#define CAN_F13R2_FB1 CAN_F13R2_FB1_Msk /*!< Filter bit 1 */
-#define CAN_F13R2_FB2_Pos (2U)
-#define CAN_F13R2_FB2_Msk (0x1U << CAN_F13R2_FB2_Pos) /*!< 0x00000004 */
-#define CAN_F13R2_FB2 CAN_F13R2_FB2_Msk /*!< Filter bit 2 */
-#define CAN_F13R2_FB3_Pos (3U)
-#define CAN_F13R2_FB3_Msk (0x1U << CAN_F13R2_FB3_Pos) /*!< 0x00000008 */
-#define CAN_F13R2_FB3 CAN_F13R2_FB3_Msk /*!< Filter bit 3 */
-#define CAN_F13R2_FB4_Pos (4U)
-#define CAN_F13R2_FB4_Msk (0x1U << CAN_F13R2_FB4_Pos) /*!< 0x00000010 */
-#define CAN_F13R2_FB4 CAN_F13R2_FB4_Msk /*!< Filter bit 4 */
-#define CAN_F13R2_FB5_Pos (5U)
-#define CAN_F13R2_FB5_Msk (0x1U << CAN_F13R2_FB5_Pos) /*!< 0x00000020 */
-#define CAN_F13R2_FB5 CAN_F13R2_FB5_Msk /*!< Filter bit 5 */
-#define CAN_F13R2_FB6_Pos (6U)
-#define CAN_F13R2_FB6_Msk (0x1U << CAN_F13R2_FB6_Pos) /*!< 0x00000040 */
-#define CAN_F13R2_FB6 CAN_F13R2_FB6_Msk /*!< Filter bit 6 */
-#define CAN_F13R2_FB7_Pos (7U)
-#define CAN_F13R2_FB7_Msk (0x1U << CAN_F13R2_FB7_Pos) /*!< 0x00000080 */
-#define CAN_F13R2_FB7 CAN_F13R2_FB7_Msk /*!< Filter bit 7 */
-#define CAN_F13R2_FB8_Pos (8U)
-#define CAN_F13R2_FB8_Msk (0x1U << CAN_F13R2_FB8_Pos) /*!< 0x00000100 */
-#define CAN_F13R2_FB8 CAN_F13R2_FB8_Msk /*!< Filter bit 8 */
-#define CAN_F13R2_FB9_Pos (9U)
-#define CAN_F13R2_FB9_Msk (0x1U << CAN_F13R2_FB9_Pos) /*!< 0x00000200 */
-#define CAN_F13R2_FB9 CAN_F13R2_FB9_Msk /*!< Filter bit 9 */
-#define CAN_F13R2_FB10_Pos (10U)
-#define CAN_F13R2_FB10_Msk (0x1U << CAN_F13R2_FB10_Pos) /*!< 0x00000400 */
-#define CAN_F13R2_FB10 CAN_F13R2_FB10_Msk /*!< Filter bit 10 */
-#define CAN_F13R2_FB11_Pos (11U)
-#define CAN_F13R2_FB11_Msk (0x1U << CAN_F13R2_FB11_Pos) /*!< 0x00000800 */
-#define CAN_F13R2_FB11 CAN_F13R2_FB11_Msk /*!< Filter bit 11 */
-#define CAN_F13R2_FB12_Pos (12U)
-#define CAN_F13R2_FB12_Msk (0x1U << CAN_F13R2_FB12_Pos) /*!< 0x00001000 */
-#define CAN_F13R2_FB12 CAN_F13R2_FB12_Msk /*!< Filter bit 12 */
-#define CAN_F13R2_FB13_Pos (13U)
-#define CAN_F13R2_FB13_Msk (0x1U << CAN_F13R2_FB13_Pos) /*!< 0x00002000 */
-#define CAN_F13R2_FB13 CAN_F13R2_FB13_Msk /*!< Filter bit 13 */
-#define CAN_F13R2_FB14_Pos (14U)
-#define CAN_F13R2_FB14_Msk (0x1U << CAN_F13R2_FB14_Pos) /*!< 0x00004000 */
-#define CAN_F13R2_FB14 CAN_F13R2_FB14_Msk /*!< Filter bit 14 */
-#define CAN_F13R2_FB15_Pos (15U)
-#define CAN_F13R2_FB15_Msk (0x1U << CAN_F13R2_FB15_Pos) /*!< 0x00008000 */
-#define CAN_F13R2_FB15 CAN_F13R2_FB15_Msk /*!< Filter bit 15 */
-#define CAN_F13R2_FB16_Pos (16U)
-#define CAN_F13R2_FB16_Msk (0x1U << CAN_F13R2_FB16_Pos) /*!< 0x00010000 */
-#define CAN_F13R2_FB16 CAN_F13R2_FB16_Msk /*!< Filter bit 16 */
-#define CAN_F13R2_FB17_Pos (17U)
-#define CAN_F13R2_FB17_Msk (0x1U << CAN_F13R2_FB17_Pos) /*!< 0x00020000 */
-#define CAN_F13R2_FB17 CAN_F13R2_FB17_Msk /*!< Filter bit 17 */
-#define CAN_F13R2_FB18_Pos (18U)
-#define CAN_F13R2_FB18_Msk (0x1U << CAN_F13R2_FB18_Pos) /*!< 0x00040000 */
-#define CAN_F13R2_FB18 CAN_F13R2_FB18_Msk /*!< Filter bit 18 */
-#define CAN_F13R2_FB19_Pos (19U)
-#define CAN_F13R2_FB19_Msk (0x1U << CAN_F13R2_FB19_Pos) /*!< 0x00080000 */
-#define CAN_F13R2_FB19 CAN_F13R2_FB19_Msk /*!< Filter bit 19 */
-#define CAN_F13R2_FB20_Pos (20U)
-#define CAN_F13R2_FB20_Msk (0x1U << CAN_F13R2_FB20_Pos) /*!< 0x00100000 */
-#define CAN_F13R2_FB20 CAN_F13R2_FB20_Msk /*!< Filter bit 20 */
-#define CAN_F13R2_FB21_Pos (21U)
-#define CAN_F13R2_FB21_Msk (0x1U << CAN_F13R2_FB21_Pos) /*!< 0x00200000 */
-#define CAN_F13R2_FB21 CAN_F13R2_FB21_Msk /*!< Filter bit 21 */
-#define CAN_F13R2_FB22_Pos (22U)
-#define CAN_F13R2_FB22_Msk (0x1U << CAN_F13R2_FB22_Pos) /*!< 0x00400000 */
-#define CAN_F13R2_FB22 CAN_F13R2_FB22_Msk /*!< Filter bit 22 */
-#define CAN_F13R2_FB23_Pos (23U)
-#define CAN_F13R2_FB23_Msk (0x1U << CAN_F13R2_FB23_Pos) /*!< 0x00800000 */
-#define CAN_F13R2_FB23 CAN_F13R2_FB23_Msk /*!< Filter bit 23 */
-#define CAN_F13R2_FB24_Pos (24U)
-#define CAN_F13R2_FB24_Msk (0x1U << CAN_F13R2_FB24_Pos) /*!< 0x01000000 */
-#define CAN_F13R2_FB24 CAN_F13R2_FB24_Msk /*!< Filter bit 24 */
-#define CAN_F13R2_FB25_Pos (25U)
-#define CAN_F13R2_FB25_Msk (0x1U << CAN_F13R2_FB25_Pos) /*!< 0x02000000 */
-#define CAN_F13R2_FB25 CAN_F13R2_FB25_Msk /*!< Filter bit 25 */
-#define CAN_F13R2_FB26_Pos (26U)
-#define CAN_F13R2_FB26_Msk (0x1U << CAN_F13R2_FB26_Pos) /*!< 0x04000000 */
-#define CAN_F13R2_FB26 CAN_F13R2_FB26_Msk /*!< Filter bit 26 */
-#define CAN_F13R2_FB27_Pos (27U)
-#define CAN_F13R2_FB27_Msk (0x1U << CAN_F13R2_FB27_Pos) /*!< 0x08000000 */
-#define CAN_F13R2_FB27 CAN_F13R2_FB27_Msk /*!< Filter bit 27 */
-#define CAN_F13R2_FB28_Pos (28U)
-#define CAN_F13R2_FB28_Msk (0x1U << CAN_F13R2_FB28_Pos) /*!< 0x10000000 */
-#define CAN_F13R2_FB28 CAN_F13R2_FB28_Msk /*!< Filter bit 28 */
-#define CAN_F13R2_FB29_Pos (29U)
-#define CAN_F13R2_FB29_Msk (0x1U << CAN_F13R2_FB29_Pos) /*!< 0x20000000 */
-#define CAN_F13R2_FB29 CAN_F13R2_FB29_Msk /*!< Filter bit 29 */
-#define CAN_F13R2_FB30_Pos (30U)
-#define CAN_F13R2_FB30_Msk (0x1U << CAN_F13R2_FB30_Pos) /*!< 0x40000000 */
-#define CAN_F13R2_FB30 CAN_F13R2_FB30_Msk /*!< Filter bit 30 */
-#define CAN_F13R2_FB31_Pos (31U)
-#define CAN_F13R2_FB31_Msk (0x1U << CAN_F13R2_FB31_Pos) /*!< 0x80000000 */
-#define CAN_F13R2_FB31 CAN_F13R2_FB31_Msk /*!< Filter bit 31 */
-
-/******************************************************************************/
-/* */
-/* Serial Peripheral Interface */
-/* */
-/******************************************************************************/
-
-/******************* Bit definition for SPI_CR1 register ********************/
-#define SPI_CR1_CPHA_Pos (0U)
-#define SPI_CR1_CPHA_Msk (0x1U << SPI_CR1_CPHA_Pos) /*!< 0x00000001 */
-#define SPI_CR1_CPHA SPI_CR1_CPHA_Msk /*!< Clock Phase */
-#define SPI_CR1_CPOL_Pos (1U)
-#define SPI_CR1_CPOL_Msk (0x1U << SPI_CR1_CPOL_Pos) /*!< 0x00000002 */
-#define SPI_CR1_CPOL SPI_CR1_CPOL_Msk /*!< Clock Polarity */
-#define SPI_CR1_MSTR_Pos (2U)
-#define SPI_CR1_MSTR_Msk (0x1U << SPI_CR1_MSTR_Pos) /*!< 0x00000004 */
-#define SPI_CR1_MSTR SPI_CR1_MSTR_Msk /*!< Master Selection */
-
-#define SPI_CR1_BR_Pos (3U)
-#define SPI_CR1_BR_Msk (0x7U << SPI_CR1_BR_Pos) /*!< 0x00000038 */
-#define SPI_CR1_BR SPI_CR1_BR_Msk /*!< BR[2:0] bits (Baud Rate Control) */
-#define SPI_CR1_BR_0 (0x1U << SPI_CR1_BR_Pos) /*!< 0x00000008 */
-#define SPI_CR1_BR_1 (0x2U << SPI_CR1_BR_Pos) /*!< 0x00000010 */
-#define SPI_CR1_BR_2 (0x4U << SPI_CR1_BR_Pos) /*!< 0x00000020 */
-
-#define SPI_CR1_SPE_Pos (6U)
-#define SPI_CR1_SPE_Msk (0x1U << SPI_CR1_SPE_Pos) /*!< 0x00000040 */
-#define SPI_CR1_SPE SPI_CR1_SPE_Msk /*!< SPI Enable */
-#define SPI_CR1_LSBFIRST_Pos (7U)
-#define SPI_CR1_LSBFIRST_Msk (0x1U << SPI_CR1_LSBFIRST_Pos) /*!< 0x00000080 */
-#define SPI_CR1_LSBFIRST SPI_CR1_LSBFIRST_Msk /*!< Frame Format */
-#define SPI_CR1_SSI_Pos (8U)
-#define SPI_CR1_SSI_Msk (0x1U << SPI_CR1_SSI_Pos) /*!< 0x00000100 */
-#define SPI_CR1_SSI SPI_CR1_SSI_Msk /*!< Internal slave select */
-#define SPI_CR1_SSM_Pos (9U)
-#define SPI_CR1_SSM_Msk (0x1U << SPI_CR1_SSM_Pos) /*!< 0x00000200 */
-#define SPI_CR1_SSM SPI_CR1_SSM_Msk /*!< Software slave management */
-#define SPI_CR1_RXONLY_Pos (10U)
-#define SPI_CR1_RXONLY_Msk (0x1U << SPI_CR1_RXONLY_Pos) /*!< 0x00000400 */
-#define SPI_CR1_RXONLY SPI_CR1_RXONLY_Msk /*!< Receive only */
-#define SPI_CR1_DFF_Pos (11U)
-#define SPI_CR1_DFF_Msk (0x1U << SPI_CR1_DFF_Pos) /*!< 0x00000800 */
-#define SPI_CR1_DFF SPI_CR1_DFF_Msk /*!< Data Frame Format */
-#define SPI_CR1_CRCNEXT_Pos (12U)
-#define SPI_CR1_CRCNEXT_Msk (0x1U << SPI_CR1_CRCNEXT_Pos) /*!< 0x00001000 */
-#define SPI_CR1_CRCNEXT SPI_CR1_CRCNEXT_Msk /*!< Transmit CRC next */
-#define SPI_CR1_CRCEN_Pos (13U)
-#define SPI_CR1_CRCEN_Msk (0x1U << SPI_CR1_CRCEN_Pos) /*!< 0x00002000 */
-#define SPI_CR1_CRCEN SPI_CR1_CRCEN_Msk /*!< Hardware CRC calculation enable */
-#define SPI_CR1_BIDIOE_Pos (14U)
-#define SPI_CR1_BIDIOE_Msk (0x1U << SPI_CR1_BIDIOE_Pos) /*!< 0x00004000 */
-#define SPI_CR1_BIDIOE SPI_CR1_BIDIOE_Msk /*!< Output enable in bidirectional mode */
-#define SPI_CR1_BIDIMODE_Pos (15U)
-#define SPI_CR1_BIDIMODE_Msk (0x1U << SPI_CR1_BIDIMODE_Pos) /*!< 0x00008000 */
-#define SPI_CR1_BIDIMODE SPI_CR1_BIDIMODE_Msk /*!< Bidirectional data mode enable */
-
-/******************* Bit definition for SPI_CR2 register ********************/
-#define SPI_CR2_RXDMAEN_Pos (0U)
-#define SPI_CR2_RXDMAEN_Msk (0x1U << SPI_CR2_RXDMAEN_Pos) /*!< 0x00000001 */
-#define SPI_CR2_RXDMAEN SPI_CR2_RXDMAEN_Msk /*!< Rx Buffer DMA Enable */
-#define SPI_CR2_TXDMAEN_Pos (1U)
-#define SPI_CR2_TXDMAEN_Msk (0x1U << SPI_CR2_TXDMAEN_Pos) /*!< 0x00000002 */
-#define SPI_CR2_TXDMAEN SPI_CR2_TXDMAEN_Msk /*!< Tx Buffer DMA Enable */
-#define SPI_CR2_SSOE_Pos (2U)
-#define SPI_CR2_SSOE_Msk (0x1U << SPI_CR2_SSOE_Pos) /*!< 0x00000004 */
-#define SPI_CR2_SSOE SPI_CR2_SSOE_Msk /*!< SS Output Enable */
-#define SPI_CR2_ERRIE_Pos (5U)
-#define SPI_CR2_ERRIE_Msk (0x1U << SPI_CR2_ERRIE_Pos) /*!< 0x00000020 */
-#define SPI_CR2_ERRIE SPI_CR2_ERRIE_Msk /*!< Error Interrupt Enable */
-#define SPI_CR2_RXNEIE_Pos (6U)
-#define SPI_CR2_RXNEIE_Msk (0x1U << SPI_CR2_RXNEIE_Pos) /*!< 0x00000040 */
-#define SPI_CR2_RXNEIE SPI_CR2_RXNEIE_Msk /*!< RX buffer Not Empty Interrupt Enable */
-#define SPI_CR2_TXEIE_Pos (7U)
-#define SPI_CR2_TXEIE_Msk (0x1U << SPI_CR2_TXEIE_Pos) /*!< 0x00000080 */
-#define SPI_CR2_TXEIE SPI_CR2_TXEIE_Msk /*!< Tx buffer Empty Interrupt Enable */
-
-/******************** Bit definition for SPI_SR register ********************/
-#define SPI_SR_RXNE_Pos (0U)
-#define SPI_SR_RXNE_Msk (0x1U << SPI_SR_RXNE_Pos) /*!< 0x00000001 */
-#define SPI_SR_RXNE SPI_SR_RXNE_Msk /*!< Receive buffer Not Empty */
-#define SPI_SR_TXE_Pos (1U)
-#define SPI_SR_TXE_Msk (0x1U << SPI_SR_TXE_Pos) /*!< 0x00000002 */
-#define SPI_SR_TXE SPI_SR_TXE_Msk /*!< Transmit buffer Empty */
-#define SPI_SR_CHSIDE_Pos (2U)
-#define SPI_SR_CHSIDE_Msk (0x1U << SPI_SR_CHSIDE_Pos) /*!< 0x00000004 */
-#define SPI_SR_CHSIDE SPI_SR_CHSIDE_Msk /*!< Channel side */
-#define SPI_SR_UDR_Pos (3U)
-#define SPI_SR_UDR_Msk (0x1U << SPI_SR_UDR_Pos) /*!< 0x00000008 */
-#define SPI_SR_UDR SPI_SR_UDR_Msk /*!< Underrun flag */
-#define SPI_SR_CRCERR_Pos (4U)
-#define SPI_SR_CRCERR_Msk (0x1U << SPI_SR_CRCERR_Pos) /*!< 0x00000010 */
-#define SPI_SR_CRCERR SPI_SR_CRCERR_Msk /*!< CRC Error flag */
-#define SPI_SR_MODF_Pos (5U)
-#define SPI_SR_MODF_Msk (0x1U << SPI_SR_MODF_Pos) /*!< 0x00000020 */
-#define SPI_SR_MODF SPI_SR_MODF_Msk /*!< Mode fault */
-#define SPI_SR_OVR_Pos (6U)
-#define SPI_SR_OVR_Msk (0x1U << SPI_SR_OVR_Pos) /*!< 0x00000040 */
-#define SPI_SR_OVR SPI_SR_OVR_Msk /*!< Overrun flag */
-#define SPI_SR_BSY_Pos (7U)
-#define SPI_SR_BSY_Msk (0x1U << SPI_SR_BSY_Pos) /*!< 0x00000080 */
-#define SPI_SR_BSY SPI_SR_BSY_Msk /*!< Busy flag */
-
-/******************** Bit definition for SPI_DR register ********************/
-#define SPI_DR_DR_Pos (0U)
-#define SPI_DR_DR_Msk (0xFFFFU << SPI_DR_DR_Pos) /*!< 0x0000FFFF */
-#define SPI_DR_DR SPI_DR_DR_Msk /*!< Data Register */
-
-/******************* Bit definition for SPI_CRCPR register ******************/
-#define SPI_CRCPR_CRCPOLY_Pos (0U)
-#define SPI_CRCPR_CRCPOLY_Msk (0xFFFFU << SPI_CRCPR_CRCPOLY_Pos) /*!< 0x0000FFFF */
-#define SPI_CRCPR_CRCPOLY SPI_CRCPR_CRCPOLY_Msk /*!< CRC polynomial register */
-
-/****************** Bit definition for SPI_RXCRCR register ******************/
-#define SPI_RXCRCR_RXCRC_Pos (0U)
-#define SPI_RXCRCR_RXCRC_Msk (0xFFFFU << SPI_RXCRCR_RXCRC_Pos) /*!< 0x0000FFFF */
-#define SPI_RXCRCR_RXCRC SPI_RXCRCR_RXCRC_Msk /*!< Rx CRC Register */
-
-/****************** Bit definition for SPI_TXCRCR register ******************/
-#define SPI_TXCRCR_TXCRC_Pos (0U)
-#define SPI_TXCRCR_TXCRC_Msk (0xFFFFU << SPI_TXCRCR_TXCRC_Pos) /*!< 0x0000FFFF */
-#define SPI_TXCRCR_TXCRC SPI_TXCRCR_TXCRC_Msk /*!< Tx CRC Register */
-
-/****************** Bit definition for SPI_I2SCFGR register *****************/
-#define SPI_I2SCFGR_I2SMOD_Pos (11U)
-#define SPI_I2SCFGR_I2SMOD_Msk (0x1U << SPI_I2SCFGR_I2SMOD_Pos) /*!< 0x00000800 */
-#define SPI_I2SCFGR_I2SMOD SPI_I2SCFGR_I2SMOD_Msk /*!< I2S mode selection */
-
-
-/******************************************************************************/
-/* */
-/* Inter-integrated Circuit Interface */
-/* */
-/******************************************************************************/
-
-/******************* Bit definition for I2C_CR1 register ********************/
-#define I2C_CR1_PE_Pos (0U)
-#define I2C_CR1_PE_Msk (0x1U << I2C_CR1_PE_Pos) /*!< 0x00000001 */
-#define I2C_CR1_PE I2C_CR1_PE_Msk /*!< Peripheral Enable */
-#define I2C_CR1_SMBUS_Pos (1U)
-#define I2C_CR1_SMBUS_Msk (0x1U << I2C_CR1_SMBUS_Pos) /*!< 0x00000002 */
-#define I2C_CR1_SMBUS I2C_CR1_SMBUS_Msk /*!< SMBus Mode */
-#define I2C_CR1_SMBTYPE_Pos (3U)
-#define I2C_CR1_SMBTYPE_Msk (0x1U << I2C_CR1_SMBTYPE_Pos) /*!< 0x00000008 */
-#define I2C_CR1_SMBTYPE I2C_CR1_SMBTYPE_Msk /*!< SMBus Type */
-#define I2C_CR1_ENARP_Pos (4U)
-#define I2C_CR1_ENARP_Msk (0x1U << I2C_CR1_ENARP_Pos) /*!< 0x00000010 */
-#define I2C_CR1_ENARP I2C_CR1_ENARP_Msk /*!< ARP Enable */
-#define I2C_CR1_ENPEC_Pos (5U)
-#define I2C_CR1_ENPEC_Msk (0x1U << I2C_CR1_ENPEC_Pos) /*!< 0x00000020 */
-#define I2C_CR1_ENPEC I2C_CR1_ENPEC_Msk /*!< PEC Enable */
-#define I2C_CR1_ENGC_Pos (6U)
-#define I2C_CR1_ENGC_Msk (0x1U << I2C_CR1_ENGC_Pos) /*!< 0x00000040 */
-#define I2C_CR1_ENGC I2C_CR1_ENGC_Msk /*!< General Call Enable */
-#define I2C_CR1_NOSTRETCH_Pos (7U)
-#define I2C_CR1_NOSTRETCH_Msk (0x1U << I2C_CR1_NOSTRETCH_Pos) /*!< 0x00000080 */
-#define I2C_CR1_NOSTRETCH I2C_CR1_NOSTRETCH_Msk /*!< Clock Stretching Disable (Slave mode) */
-#define I2C_CR1_START_Pos (8U)
-#define I2C_CR1_START_Msk (0x1U << I2C_CR1_START_Pos) /*!< 0x00000100 */
-#define I2C_CR1_START I2C_CR1_START_Msk /*!< Start Generation */
-#define I2C_CR1_STOP_Pos (9U)
-#define I2C_CR1_STOP_Msk (0x1U << I2C_CR1_STOP_Pos) /*!< 0x00000200 */
-#define I2C_CR1_STOP I2C_CR1_STOP_Msk /*!< Stop Generation */
-#define I2C_CR1_ACK_Pos (10U)
-#define I2C_CR1_ACK_Msk (0x1U << I2C_CR1_ACK_Pos) /*!< 0x00000400 */
-#define I2C_CR1_ACK I2C_CR1_ACK_Msk /*!< Acknowledge Enable */
-#define I2C_CR1_POS_Pos (11U)
-#define I2C_CR1_POS_Msk (0x1U << I2C_CR1_POS_Pos) /*!< 0x00000800 */
-#define I2C_CR1_POS I2C_CR1_POS_Msk /*!< Acknowledge/PEC Position (for data reception) */
-#define I2C_CR1_PEC_Pos (12U)
-#define I2C_CR1_PEC_Msk (0x1U << I2C_CR1_PEC_Pos) /*!< 0x00001000 */
-#define I2C_CR1_PEC I2C_CR1_PEC_Msk /*!< Packet Error Checking */
-#define I2C_CR1_ALERT_Pos (13U)
-#define I2C_CR1_ALERT_Msk (0x1U << I2C_CR1_ALERT_Pos) /*!< 0x00002000 */
-#define I2C_CR1_ALERT I2C_CR1_ALERT_Msk /*!< SMBus Alert */
-#define I2C_CR1_SWRST_Pos (15U)
-#define I2C_CR1_SWRST_Msk (0x1U << I2C_CR1_SWRST_Pos) /*!< 0x00008000 */
-#define I2C_CR1_SWRST I2C_CR1_SWRST_Msk /*!< Software Reset */
-
-/******************* Bit definition for I2C_CR2 register ********************/
-#define I2C_CR2_FREQ_Pos (0U)
-#define I2C_CR2_FREQ_Msk (0x3FU << I2C_CR2_FREQ_Pos) /*!< 0x0000003F */
-#define I2C_CR2_FREQ I2C_CR2_FREQ_Msk /*!< FREQ[5:0] bits (Peripheral Clock Frequency) */
-#define I2C_CR2_FREQ_0 (0x01U << I2C_CR2_FREQ_Pos) /*!< 0x00000001 */
-#define I2C_CR2_FREQ_1 (0x02U << I2C_CR2_FREQ_Pos) /*!< 0x00000002 */
-#define I2C_CR2_FREQ_2 (0x04U << I2C_CR2_FREQ_Pos) /*!< 0x00000004 */
-#define I2C_CR2_FREQ_3 (0x08U << I2C_CR2_FREQ_Pos) /*!< 0x00000008 */
-#define I2C_CR2_FREQ_4 (0x10U << I2C_CR2_FREQ_Pos) /*!< 0x00000010 */
-#define I2C_CR2_FREQ_5 (0x20U << I2C_CR2_FREQ_Pos) /*!< 0x00000020 */
-
-#define I2C_CR2_ITERREN_Pos (8U)
-#define I2C_CR2_ITERREN_Msk (0x1U << I2C_CR2_ITERREN_Pos) /*!< 0x00000100 */
-#define I2C_CR2_ITERREN I2C_CR2_ITERREN_Msk /*!< Error Interrupt Enable */
-#define I2C_CR2_ITEVTEN_Pos (9U)
-#define I2C_CR2_ITEVTEN_Msk (0x1U << I2C_CR2_ITEVTEN_Pos) /*!< 0x00000200 */
-#define I2C_CR2_ITEVTEN I2C_CR2_ITEVTEN_Msk /*!< Event Interrupt Enable */
-#define I2C_CR2_ITBUFEN_Pos (10U)
-#define I2C_CR2_ITBUFEN_Msk (0x1U << I2C_CR2_ITBUFEN_Pos) /*!< 0x00000400 */
-#define I2C_CR2_ITBUFEN I2C_CR2_ITBUFEN_Msk /*!< Buffer Interrupt Enable */
-#define I2C_CR2_DMAEN_Pos (11U)
-#define I2C_CR2_DMAEN_Msk (0x1U << I2C_CR2_DMAEN_Pos) /*!< 0x00000800 */
-#define I2C_CR2_DMAEN I2C_CR2_DMAEN_Msk /*!< DMA Requests Enable */
-#define I2C_CR2_LAST_Pos (12U)
-#define I2C_CR2_LAST_Msk (0x1U << I2C_CR2_LAST_Pos) /*!< 0x00001000 */
-#define I2C_CR2_LAST I2C_CR2_LAST_Msk /*!< DMA Last Transfer */
-
-/******************* Bit definition for I2C_OAR1 register *******************/
-#define I2C_OAR1_ADD1_7 ((uint32_t)0x000000FE) /*!< Interface Address */
-#define I2C_OAR1_ADD8_9 ((uint32_t)0x00000300) /*!< Interface Address */
-
-#define I2C_OAR1_ADD0_Pos (0U)
-#define I2C_OAR1_ADD0_Msk (0x1U << I2C_OAR1_ADD0_Pos) /*!< 0x00000001 */
-#define I2C_OAR1_ADD0 I2C_OAR1_ADD0_Msk /*!< Bit 0 */
-#define I2C_OAR1_ADD1_Pos (1U)
-#define I2C_OAR1_ADD1_Msk (0x1U << I2C_OAR1_ADD1_Pos) /*!< 0x00000002 */
-#define I2C_OAR1_ADD1 I2C_OAR1_ADD1_Msk /*!< Bit 1 */
-#define I2C_OAR1_ADD2_Pos (2U)
-#define I2C_OAR1_ADD2_Msk (0x1U << I2C_OAR1_ADD2_Pos) /*!< 0x00000004 */
-#define I2C_OAR1_ADD2 I2C_OAR1_ADD2_Msk /*!< Bit 2 */
-#define I2C_OAR1_ADD3_Pos (3U)
-#define I2C_OAR1_ADD3_Msk (0x1U << I2C_OAR1_ADD3_Pos) /*!< 0x00000008 */
-#define I2C_OAR1_ADD3 I2C_OAR1_ADD3_Msk /*!< Bit 3 */
-#define I2C_OAR1_ADD4_Pos (4U)
-#define I2C_OAR1_ADD4_Msk (0x1U << I2C_OAR1_ADD4_Pos) /*!< 0x00000010 */
-#define I2C_OAR1_ADD4 I2C_OAR1_ADD4_Msk /*!< Bit 4 */
-#define I2C_OAR1_ADD5_Pos (5U)
-#define I2C_OAR1_ADD5_Msk (0x1U << I2C_OAR1_ADD5_Pos) /*!< 0x00000020 */
-#define I2C_OAR1_ADD5 I2C_OAR1_ADD5_Msk /*!< Bit 5 */
-#define I2C_OAR1_ADD6_Pos (6U)
-#define I2C_OAR1_ADD6_Msk (0x1U << I2C_OAR1_ADD6_Pos) /*!< 0x00000040 */
-#define I2C_OAR1_ADD6 I2C_OAR1_ADD6_Msk /*!< Bit 6 */
-#define I2C_OAR1_ADD7_Pos (7U)
-#define I2C_OAR1_ADD7_Msk (0x1U << I2C_OAR1_ADD7_Pos) /*!< 0x00000080 */
-#define I2C_OAR1_ADD7 I2C_OAR1_ADD7_Msk /*!< Bit 7 */
-#define I2C_OAR1_ADD8_Pos (8U)
-#define I2C_OAR1_ADD8_Msk (0x1U << I2C_OAR1_ADD8_Pos) /*!< 0x00000100 */
-#define I2C_OAR1_ADD8 I2C_OAR1_ADD8_Msk /*!< Bit 8 */
-#define I2C_OAR1_ADD9_Pos (9U)
-#define I2C_OAR1_ADD9_Msk (0x1U << I2C_OAR1_ADD9_Pos) /*!< 0x00000200 */
-#define I2C_OAR1_ADD9 I2C_OAR1_ADD9_Msk /*!< Bit 9 */
-
-#define I2C_OAR1_ADDMODE_Pos (15U)
-#define I2C_OAR1_ADDMODE_Msk (0x1U << I2C_OAR1_ADDMODE_Pos) /*!< 0x00008000 */
-#define I2C_OAR1_ADDMODE I2C_OAR1_ADDMODE_Msk /*!< Addressing Mode (Slave mode) */
-
-/******************* Bit definition for I2C_OAR2 register *******************/
-#define I2C_OAR2_ENDUAL_Pos (0U)
-#define I2C_OAR2_ENDUAL_Msk (0x1U << I2C_OAR2_ENDUAL_Pos) /*!< 0x00000001 */
-#define I2C_OAR2_ENDUAL I2C_OAR2_ENDUAL_Msk /*!< Dual addressing mode enable */
-#define I2C_OAR2_ADD2_Pos (1U)
-#define I2C_OAR2_ADD2_Msk (0x7FU << I2C_OAR2_ADD2_Pos) /*!< 0x000000FE */
-#define I2C_OAR2_ADD2 I2C_OAR2_ADD2_Msk /*!< Interface address */
-
-/******************* Bit definition for I2C_SR1 register ********************/
-#define I2C_SR1_SB_Pos (0U)
-#define I2C_SR1_SB_Msk (0x1U << I2C_SR1_SB_Pos) /*!< 0x00000001 */
-#define I2C_SR1_SB I2C_SR1_SB_Msk /*!< Start Bit (Master mode) */
-#define I2C_SR1_ADDR_Pos (1U)
-#define I2C_SR1_ADDR_Msk (0x1U << I2C_SR1_ADDR_Pos) /*!< 0x00000002 */
-#define I2C_SR1_ADDR I2C_SR1_ADDR_Msk /*!< Address sent (master mode)/matched (slave mode) */
-#define I2C_SR1_BTF_Pos (2U)
-#define I2C_SR1_BTF_Msk (0x1U << I2C_SR1_BTF_Pos) /*!< 0x00000004 */
-#define I2C_SR1_BTF I2C_SR1_BTF_Msk /*!< Byte Transfer Finished */
-#define I2C_SR1_ADD10_Pos (3U)
-#define I2C_SR1_ADD10_Msk (0x1U << I2C_SR1_ADD10_Pos) /*!< 0x00000008 */
-#define I2C_SR1_ADD10 I2C_SR1_ADD10_Msk /*!< 10-bit header sent (Master mode) */
-#define I2C_SR1_STOPF_Pos (4U)
-#define I2C_SR1_STOPF_Msk (0x1U << I2C_SR1_STOPF_Pos) /*!< 0x00000010 */
-#define I2C_SR1_STOPF I2C_SR1_STOPF_Msk /*!< Stop detection (Slave mode) */
-#define I2C_SR1_RXNE_Pos (6U)
-#define I2C_SR1_RXNE_Msk (0x1U << I2C_SR1_RXNE_Pos) /*!< 0x00000040 */
-#define I2C_SR1_RXNE I2C_SR1_RXNE_Msk /*!< Data Register not Empty (receivers) */
-#define I2C_SR1_TXE_Pos (7U)
-#define I2C_SR1_TXE_Msk (0x1U << I2C_SR1_TXE_Pos) /*!< 0x00000080 */
-#define I2C_SR1_TXE I2C_SR1_TXE_Msk /*!< Data Register Empty (transmitters) */
-#define I2C_SR1_BERR_Pos (8U)
-#define I2C_SR1_BERR_Msk (0x1U << I2C_SR1_BERR_Pos) /*!< 0x00000100 */
-#define I2C_SR1_BERR I2C_SR1_BERR_Msk /*!< Bus Error */
-#define I2C_SR1_ARLO_Pos (9U)
-#define I2C_SR1_ARLO_Msk (0x1U << I2C_SR1_ARLO_Pos) /*!< 0x00000200 */
-#define I2C_SR1_ARLO I2C_SR1_ARLO_Msk /*!< Arbitration Lost (master mode) */
-#define I2C_SR1_AF_Pos (10U)
-#define I2C_SR1_AF_Msk (0x1U << I2C_SR1_AF_Pos) /*!< 0x00000400 */
-#define I2C_SR1_AF I2C_SR1_AF_Msk /*!< Acknowledge Failure */
-#define I2C_SR1_OVR_Pos (11U)
-#define I2C_SR1_OVR_Msk (0x1U << I2C_SR1_OVR_Pos) /*!< 0x00000800 */
-#define I2C_SR1_OVR I2C_SR1_OVR_Msk /*!< Overrun/Underrun */
-#define I2C_SR1_PECERR_Pos (12U)
-#define I2C_SR1_PECERR_Msk (0x1U << I2C_SR1_PECERR_Pos) /*!< 0x00001000 */
-#define I2C_SR1_PECERR I2C_SR1_PECERR_Msk /*!< PEC Error in reception */
-#define I2C_SR1_TIMEOUT_Pos (14U)
-#define I2C_SR1_TIMEOUT_Msk (0x1U << I2C_SR1_TIMEOUT_Pos) /*!< 0x00004000 */
-#define I2C_SR1_TIMEOUT I2C_SR1_TIMEOUT_Msk /*!< Timeout or Tlow Error */
-#define I2C_SR1_SMBALERT_Pos (15U)
-#define I2C_SR1_SMBALERT_Msk (0x1U << I2C_SR1_SMBALERT_Pos) /*!< 0x00008000 */
-#define I2C_SR1_SMBALERT I2C_SR1_SMBALERT_Msk /*!< SMBus Alert */
-
-/******************* Bit definition for I2C_SR2 register ********************/
-#define I2C_SR2_MSL_Pos (0U)
-#define I2C_SR2_MSL_Msk (0x1U << I2C_SR2_MSL_Pos) /*!< 0x00000001 */
-#define I2C_SR2_MSL I2C_SR2_MSL_Msk /*!< Master/Slave */
-#define I2C_SR2_BUSY_Pos (1U)
-#define I2C_SR2_BUSY_Msk (0x1U << I2C_SR2_BUSY_Pos) /*!< 0x00000002 */
-#define I2C_SR2_BUSY I2C_SR2_BUSY_Msk /*!< Bus Busy */
-#define I2C_SR2_TRA_Pos (2U)
-#define I2C_SR2_TRA_Msk (0x1U << I2C_SR2_TRA_Pos) /*!< 0x00000004 */
-#define I2C_SR2_TRA I2C_SR2_TRA_Msk /*!< Transmitter/Receiver */
-#define I2C_SR2_GENCALL_Pos (4U)
-#define I2C_SR2_GENCALL_Msk (0x1U << I2C_SR2_GENCALL_Pos) /*!< 0x00000010 */
-#define I2C_SR2_GENCALL I2C_SR2_GENCALL_Msk /*!< General Call Address (Slave mode) */
-#define I2C_SR2_SMBDEFAULT_Pos (5U)
-#define I2C_SR2_SMBDEFAULT_Msk (0x1U << I2C_SR2_SMBDEFAULT_Pos) /*!< 0x00000020 */
-#define I2C_SR2_SMBDEFAULT I2C_SR2_SMBDEFAULT_Msk /*!< SMBus Device Default Address (Slave mode) */
-#define I2C_SR2_SMBHOST_Pos (6U)
-#define I2C_SR2_SMBHOST_Msk (0x1U << I2C_SR2_SMBHOST_Pos) /*!< 0x00000040 */
-#define I2C_SR2_SMBHOST I2C_SR2_SMBHOST_Msk /*!< SMBus Host Header (Slave mode) */
-#define I2C_SR2_DUALF_Pos (7U)
-#define I2C_SR2_DUALF_Msk (0x1U << I2C_SR2_DUALF_Pos) /*!< 0x00000080 */
-#define I2C_SR2_DUALF I2C_SR2_DUALF_Msk /*!< Dual Flag (Slave mode) */
-#define I2C_SR2_PEC_Pos (8U)
-#define I2C_SR2_PEC_Msk (0xFFU << I2C_SR2_PEC_Pos) /*!< 0x0000FF00 */
-#define I2C_SR2_PEC I2C_SR2_PEC_Msk /*!< Packet Error Checking Register */
-
-/******************* Bit definition for I2C_CCR register ********************/
-#define I2C_CCR_CCR_Pos (0U)
-#define I2C_CCR_CCR_Msk (0xFFFU << I2C_CCR_CCR_Pos) /*!< 0x00000FFF */
-#define I2C_CCR_CCR I2C_CCR_CCR_Msk /*!< Clock Control Register in Fast/Standard mode (Master mode) */
-#define I2C_CCR_DUTY_Pos (14U)
-#define I2C_CCR_DUTY_Msk (0x1U << I2C_CCR_DUTY_Pos) /*!< 0x00004000 */
-#define I2C_CCR_DUTY I2C_CCR_DUTY_Msk /*!< Fast Mode Duty Cycle */
-#define I2C_CCR_FS_Pos (15U)
-#define I2C_CCR_FS_Msk (0x1U << I2C_CCR_FS_Pos) /*!< 0x00008000 */
-#define I2C_CCR_FS I2C_CCR_FS_Msk /*!< I2C Master Mode Selection */
-
-/****************** Bit definition for I2C_TRISE register *******************/
-#define I2C_TRISE_TRISE_Pos (0U)
-#define I2C_TRISE_TRISE_Msk (0x3FU << I2C_TRISE_TRISE_Pos) /*!< 0x0000003F */
-#define I2C_TRISE_TRISE I2C_TRISE_TRISE_Msk /*!< Maximum Rise Time in Fast/Standard mode (Master mode) */
-
-/******************************************************************************/
-/* */
-/* Universal Synchronous Asynchronous Receiver Transmitter */
-/* */
-/******************************************************************************/
-
-/******************* Bit definition for USART_SR register *******************/
-#define USART_SR_PE_Pos (0U)
-#define USART_SR_PE_Msk (0x1U << USART_SR_PE_Pos) /*!< 0x00000001 */
-#define USART_SR_PE USART_SR_PE_Msk /*!< Parity Error */
-#define USART_SR_FE_Pos (1U)
-#define USART_SR_FE_Msk (0x1U << USART_SR_FE_Pos) /*!< 0x00000002 */
-#define USART_SR_FE USART_SR_FE_Msk /*!< Framing Error */
-#define USART_SR_NE_Pos (2U)
-#define USART_SR_NE_Msk (0x1U << USART_SR_NE_Pos) /*!< 0x00000004 */
-#define USART_SR_NE USART_SR_NE_Msk /*!< Noise Error Flag */
-#define USART_SR_ORE_Pos (3U)
-#define USART_SR_ORE_Msk (0x1U << USART_SR_ORE_Pos) /*!< 0x00000008 */
-#define USART_SR_ORE USART_SR_ORE_Msk /*!< OverRun Error */
-#define USART_SR_IDLE_Pos (4U)
-#define USART_SR_IDLE_Msk (0x1U << USART_SR_IDLE_Pos) /*!< 0x00000010 */
-#define USART_SR_IDLE USART_SR_IDLE_Msk /*!< IDLE line detected */
-#define USART_SR_RXNE_Pos (5U)
-#define USART_SR_RXNE_Msk (0x1U << USART_SR_RXNE_Pos) /*!< 0x00000020 */
-#define USART_SR_RXNE USART_SR_RXNE_Msk /*!< Read Data Register Not Empty */
-#define USART_SR_TC_Pos (6U)
-#define USART_SR_TC_Msk (0x1U << USART_SR_TC_Pos) /*!< 0x00000040 */
-#define USART_SR_TC USART_SR_TC_Msk /*!< Transmission Complete */
-#define USART_SR_TXE_Pos (7U)
-#define USART_SR_TXE_Msk (0x1U << USART_SR_TXE_Pos) /*!< 0x00000080 */
-#define USART_SR_TXE USART_SR_TXE_Msk /*!< Transmit Data Register Empty */
-#define USART_SR_LBD_Pos (8U)
-#define USART_SR_LBD_Msk (0x1U << USART_SR_LBD_Pos) /*!< 0x00000100 */
-#define USART_SR_LBD USART_SR_LBD_Msk /*!< LIN Break Detection Flag */
-#define USART_SR_CTS_Pos (9U)
-#define USART_SR_CTS_Msk (0x1U << USART_SR_CTS_Pos) /*!< 0x00000200 */
-#define USART_SR_CTS USART_SR_CTS_Msk /*!< CTS Flag */
-
-/******************* Bit definition for USART_DR register *******************/
-#define USART_DR_DR_Pos (0U)
-#define USART_DR_DR_Msk (0x1FFU << USART_DR_DR_Pos) /*!< 0x000001FF */
-#define USART_DR_DR USART_DR_DR_Msk /*!< Data value */
-
-/****************** Bit definition for USART_BRR register *******************/
-#define USART_BRR_DIV_Fraction_Pos (0U)
-#define USART_BRR_DIV_Fraction_Msk (0xFU << USART_BRR_DIV_Fraction_Pos) /*!< 0x0000000F */
-#define USART_BRR_DIV_Fraction USART_BRR_DIV_Fraction_Msk /*!< Fraction of USARTDIV */
-#define USART_BRR_DIV_Mantissa_Pos (4U)
-#define USART_BRR_DIV_Mantissa_Msk (0xFFFU << USART_BRR_DIV_Mantissa_Pos) /*!< 0x0000FFF0 */
-#define USART_BRR_DIV_Mantissa USART_BRR_DIV_Mantissa_Msk /*!< Mantissa of USARTDIV */
-
-/****************** Bit definition for USART_CR1 register *******************/
-#define USART_CR1_SBK_Pos (0U)
-#define USART_CR1_SBK_Msk (0x1U << USART_CR1_SBK_Pos) /*!< 0x00000001 */
-#define USART_CR1_SBK USART_CR1_SBK_Msk /*!< Send Break */
-#define USART_CR1_RWU_Pos (1U)
-#define USART_CR1_RWU_Msk (0x1U << USART_CR1_RWU_Pos) /*!< 0x00000002 */
-#define USART_CR1_RWU USART_CR1_RWU_Msk /*!< Receiver wakeup */
-#define USART_CR1_RE_Pos (2U)
-#define USART_CR1_RE_Msk (0x1U << USART_CR1_RE_Pos) /*!< 0x00000004 */
-#define USART_CR1_RE USART_CR1_RE_Msk /*!< Receiver Enable */
-#define USART_CR1_TE_Pos (3U)
-#define USART_CR1_TE_Msk (0x1U << USART_CR1_TE_Pos) /*!< 0x00000008 */
-#define USART_CR1_TE USART_CR1_TE_Msk /*!< Transmitter Enable */
-#define USART_CR1_IDLEIE_Pos (4U)
-#define USART_CR1_IDLEIE_Msk (0x1U << USART_CR1_IDLEIE_Pos) /*!< 0x00000010 */
-#define USART_CR1_IDLEIE USART_CR1_IDLEIE_Msk /*!< IDLE Interrupt Enable */
-#define USART_CR1_RXNEIE_Pos (5U)
-#define USART_CR1_RXNEIE_Msk (0x1U << USART_CR1_RXNEIE_Pos) /*!< 0x00000020 */
-#define USART_CR1_RXNEIE USART_CR1_RXNEIE_Msk /*!< RXNE Interrupt Enable */
-#define USART_CR1_TCIE_Pos (6U)
-#define USART_CR1_TCIE_Msk (0x1U << USART_CR1_TCIE_Pos) /*!< 0x00000040 */
-#define USART_CR1_TCIE USART_CR1_TCIE_Msk /*!< Transmission Complete Interrupt Enable */
-#define USART_CR1_TXEIE_Pos (7U)
-#define USART_CR1_TXEIE_Msk (0x1U << USART_CR1_TXEIE_Pos) /*!< 0x00000080 */
-#define USART_CR1_TXEIE USART_CR1_TXEIE_Msk /*!< PE Interrupt Enable */
-#define USART_CR1_PEIE_Pos (8U)
-#define USART_CR1_PEIE_Msk (0x1U << USART_CR1_PEIE_Pos) /*!< 0x00000100 */
-#define USART_CR1_PEIE USART_CR1_PEIE_Msk /*!< PE Interrupt Enable */
-#define USART_CR1_PS_Pos (9U)
-#define USART_CR1_PS_Msk (0x1U << USART_CR1_PS_Pos) /*!< 0x00000200 */
-#define USART_CR1_PS USART_CR1_PS_Msk /*!< Parity Selection */
-#define USART_CR1_PCE_Pos (10U)
-#define USART_CR1_PCE_Msk (0x1U << USART_CR1_PCE_Pos) /*!< 0x00000400 */
-#define USART_CR1_PCE USART_CR1_PCE_Msk /*!< Parity Control Enable */
-#define USART_CR1_WAKE_Pos (11U)
-#define USART_CR1_WAKE_Msk (0x1U << USART_CR1_WAKE_Pos) /*!< 0x00000800 */
-#define USART_CR1_WAKE USART_CR1_WAKE_Msk /*!< Wakeup method */
-#define USART_CR1_M_Pos (12U)
-#define USART_CR1_M_Msk (0x1U << USART_CR1_M_Pos) /*!< 0x00001000 */
-#define USART_CR1_M USART_CR1_M_Msk /*!< Word length */
-#define USART_CR1_UE_Pos (13U)
-#define USART_CR1_UE_Msk (0x1U << USART_CR1_UE_Pos) /*!< 0x00002000 */
-#define USART_CR1_UE USART_CR1_UE_Msk /*!< USART Enable */
-
-/****************** Bit definition for USART_CR2 register *******************/
-#define USART_CR2_ADD_Pos (0U)
-#define USART_CR2_ADD_Msk (0xFU << USART_CR2_ADD_Pos) /*!< 0x0000000F */
-#define USART_CR2_ADD USART_CR2_ADD_Msk /*!< Address of the USART node */
-#define USART_CR2_LBDL_Pos (5U)
-#define USART_CR2_LBDL_Msk (0x1U << USART_CR2_LBDL_Pos) /*!< 0x00000020 */
-#define USART_CR2_LBDL USART_CR2_LBDL_Msk /*!< LIN Break Detection Length */
-#define USART_CR2_LBDIE_Pos (6U)
-#define USART_CR2_LBDIE_Msk (0x1U << USART_CR2_LBDIE_Pos) /*!< 0x00000040 */
-#define USART_CR2_LBDIE USART_CR2_LBDIE_Msk /*!< LIN Break Detection Interrupt Enable */
-#define USART_CR2_LBCL_Pos (8U)
-#define USART_CR2_LBCL_Msk (0x1U << USART_CR2_LBCL_Pos) /*!< 0x00000100 */
-#define USART_CR2_LBCL USART_CR2_LBCL_Msk /*!< Last Bit Clock pulse */
-#define USART_CR2_CPHA_Pos (9U)
-#define USART_CR2_CPHA_Msk (0x1U << USART_CR2_CPHA_Pos) /*!< 0x00000200 */
-#define USART_CR2_CPHA USART_CR2_CPHA_Msk /*!< Clock Phase */
-#define USART_CR2_CPOL_Pos (10U)
-#define USART_CR2_CPOL_Msk (0x1U << USART_CR2_CPOL_Pos) /*!< 0x00000400 */
-#define USART_CR2_CPOL USART_CR2_CPOL_Msk /*!< Clock Polarity */
-#define USART_CR2_CLKEN_Pos (11U)
-#define USART_CR2_CLKEN_Msk (0x1U << USART_CR2_CLKEN_Pos) /*!< 0x00000800 */
-#define USART_CR2_CLKEN USART_CR2_CLKEN_Msk /*!< Clock Enable */
-
-#define USART_CR2_STOP_Pos (12U)
-#define USART_CR2_STOP_Msk (0x3U << USART_CR2_STOP_Pos) /*!< 0x00003000 */
-#define USART_CR2_STOP USART_CR2_STOP_Msk /*!< STOP[1:0] bits (STOP bits) */
-#define USART_CR2_STOP_0 (0x1U << USART_CR2_STOP_Pos) /*!< 0x00001000 */
-#define USART_CR2_STOP_1 (0x2U << USART_CR2_STOP_Pos) /*!< 0x00002000 */
-
-#define USART_CR2_LINEN_Pos (14U)
-#define USART_CR2_LINEN_Msk (0x1U << USART_CR2_LINEN_Pos) /*!< 0x00004000 */
-#define USART_CR2_LINEN USART_CR2_LINEN_Msk /*!< LIN mode enable */
-
-/****************** Bit definition for USART_CR3 register *******************/
-#define USART_CR3_EIE_Pos (0U)
-#define USART_CR3_EIE_Msk (0x1U << USART_CR3_EIE_Pos) /*!< 0x00000001 */
-#define USART_CR3_EIE USART_CR3_EIE_Msk /*!< Error Interrupt Enable */
-#define USART_CR3_IREN_Pos (1U)
-#define USART_CR3_IREN_Msk (0x1U << USART_CR3_IREN_Pos) /*!< 0x00000002 */
-#define USART_CR3_IREN USART_CR3_IREN_Msk /*!< IrDA mode Enable */
-#define USART_CR3_IRLP_Pos (2U)
-#define USART_CR3_IRLP_Msk (0x1U << USART_CR3_IRLP_Pos) /*!< 0x00000004 */
-#define USART_CR3_IRLP USART_CR3_IRLP_Msk /*!< IrDA Low-Power */
-#define USART_CR3_HDSEL_Pos (3U)
-#define USART_CR3_HDSEL_Msk (0x1U << USART_CR3_HDSEL_Pos) /*!< 0x00000008 */
-#define USART_CR3_HDSEL USART_CR3_HDSEL_Msk /*!< Half-Duplex Selection */
-#define USART_CR3_NACK_Pos (4U)
-#define USART_CR3_NACK_Msk (0x1U << USART_CR3_NACK_Pos) /*!< 0x00000010 */
-#define USART_CR3_NACK USART_CR3_NACK_Msk /*!< Smartcard NACK enable */
-#define USART_CR3_SCEN_Pos (5U)
-#define USART_CR3_SCEN_Msk (0x1U << USART_CR3_SCEN_Pos) /*!< 0x00000020 */
-#define USART_CR3_SCEN USART_CR3_SCEN_Msk /*!< Smartcard mode enable */
-#define USART_CR3_DMAR_Pos (6U)
-#define USART_CR3_DMAR_Msk (0x1U << USART_CR3_DMAR_Pos) /*!< 0x00000040 */
-#define USART_CR3_DMAR USART_CR3_DMAR_Msk /*!< DMA Enable Receiver */
-#define USART_CR3_DMAT_Pos (7U)
-#define USART_CR3_DMAT_Msk (0x1U << USART_CR3_DMAT_Pos) /*!< 0x00000080 */
-#define USART_CR3_DMAT USART_CR3_DMAT_Msk /*!< DMA Enable Transmitter */
-#define USART_CR3_RTSE_Pos (8U)
-#define USART_CR3_RTSE_Msk (0x1U << USART_CR3_RTSE_Pos) /*!< 0x00000100 */
-#define USART_CR3_RTSE USART_CR3_RTSE_Msk /*!< RTS Enable */
-#define USART_CR3_CTSE_Pos (9U)
-#define USART_CR3_CTSE_Msk (0x1U << USART_CR3_CTSE_Pos) /*!< 0x00000200 */
-#define USART_CR3_CTSE USART_CR3_CTSE_Msk /*!< CTS Enable */
-#define USART_CR3_CTSIE_Pos (10U)
-#define USART_CR3_CTSIE_Msk (0x1U << USART_CR3_CTSIE_Pos) /*!< 0x00000400 */
-#define USART_CR3_CTSIE USART_CR3_CTSIE_Msk /*!< CTS Interrupt Enable */
-
-/****************** Bit definition for USART_GTPR register ******************/
-#define USART_GTPR_PSC_Pos (0U)
-#define USART_GTPR_PSC_Msk (0xFFU << USART_GTPR_PSC_Pos) /*!< 0x000000FF */
-#define USART_GTPR_PSC USART_GTPR_PSC_Msk /*!< PSC[7:0] bits (Prescaler value) */
-#define USART_GTPR_PSC_0 (0x01U << USART_GTPR_PSC_Pos) /*!< 0x00000001 */
-#define USART_GTPR_PSC_1 (0x02U << USART_GTPR_PSC_Pos) /*!< 0x00000002 */
-#define USART_GTPR_PSC_2 (0x04U << USART_GTPR_PSC_Pos) /*!< 0x00000004 */
-#define USART_GTPR_PSC_3 (0x08U << USART_GTPR_PSC_Pos) /*!< 0x00000008 */
-#define USART_GTPR_PSC_4 (0x10U << USART_GTPR_PSC_Pos) /*!< 0x00000010 */
-#define USART_GTPR_PSC_5 (0x20U << USART_GTPR_PSC_Pos) /*!< 0x00000020 */
-#define USART_GTPR_PSC_6 (0x40U << USART_GTPR_PSC_Pos) /*!< 0x00000040 */
-#define USART_GTPR_PSC_7 (0x80U << USART_GTPR_PSC_Pos) /*!< 0x00000080 */
-
-#define USART_GTPR_GT_Pos (8U)
-#define USART_GTPR_GT_Msk (0xFFU << USART_GTPR_GT_Pos) /*!< 0x0000FF00 */
-#define USART_GTPR_GT USART_GTPR_GT_Msk /*!< Guard time value */
-
-/******************************************************************************/
-/* */
-/* Debug MCU */
-/* */
-/******************************************************************************/
-
-/**************** Bit definition for DBGMCU_IDCODE register *****************/
-#define DBGMCU_IDCODE_DEV_ID_Pos (0U)
-#define DBGMCU_IDCODE_DEV_ID_Msk (0xFFFU << DBGMCU_IDCODE_DEV_ID_Pos) /*!< 0x00000FFF */
-#define DBGMCU_IDCODE_DEV_ID DBGMCU_IDCODE_DEV_ID_Msk /*!< Device Identifier */
-
-#define DBGMCU_IDCODE_REV_ID_Pos (16U)
-#define DBGMCU_IDCODE_REV_ID_Msk (0xFFFFU << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0xFFFF0000 */
-#define DBGMCU_IDCODE_REV_ID DBGMCU_IDCODE_REV_ID_Msk /*!< REV_ID[15:0] bits (Revision Identifier) */
-#define DBGMCU_IDCODE_REV_ID_0 (0x0001U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00010000 */
-#define DBGMCU_IDCODE_REV_ID_1 (0x0002U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00020000 */
-#define DBGMCU_IDCODE_REV_ID_2 (0x0004U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00040000 */
-#define DBGMCU_IDCODE_REV_ID_3 (0x0008U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00080000 */
-#define DBGMCU_IDCODE_REV_ID_4 (0x0010U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00100000 */
-#define DBGMCU_IDCODE_REV_ID_5 (0x0020U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00200000 */
-#define DBGMCU_IDCODE_REV_ID_6 (0x0040U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00400000 */
-#define DBGMCU_IDCODE_REV_ID_7 (0x0080U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00800000 */
-#define DBGMCU_IDCODE_REV_ID_8 (0x0100U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x01000000 */
-#define DBGMCU_IDCODE_REV_ID_9 (0x0200U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x02000000 */
-#define DBGMCU_IDCODE_REV_ID_10 (0x0400U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x04000000 */
-#define DBGMCU_IDCODE_REV_ID_11 (0x0800U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x08000000 */
-#define DBGMCU_IDCODE_REV_ID_12 (0x1000U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x10000000 */
-#define DBGMCU_IDCODE_REV_ID_13 (0x2000U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x20000000 */
-#define DBGMCU_IDCODE_REV_ID_14 (0x4000U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x40000000 */
-#define DBGMCU_IDCODE_REV_ID_15 (0x8000U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x80000000 */
-
-/****************** Bit definition for DBGMCU_CR register *******************/
-#define DBGMCU_CR_DBG_SLEEP_Pos (0U)
-#define DBGMCU_CR_DBG_SLEEP_Msk (0x1U << DBGMCU_CR_DBG_SLEEP_Pos) /*!< 0x00000001 */
-#define DBGMCU_CR_DBG_SLEEP DBGMCU_CR_DBG_SLEEP_Msk /*!< Debug Sleep Mode */
-#define DBGMCU_CR_DBG_STOP_Pos (1U)
-#define DBGMCU_CR_DBG_STOP_Msk (0x1U << DBGMCU_CR_DBG_STOP_Pos) /*!< 0x00000002 */
-#define DBGMCU_CR_DBG_STOP DBGMCU_CR_DBG_STOP_Msk /*!< Debug Stop Mode */
-#define DBGMCU_CR_DBG_STANDBY_Pos (2U)
-#define DBGMCU_CR_DBG_STANDBY_Msk (0x1U << DBGMCU_CR_DBG_STANDBY_Pos) /*!< 0x00000004 */
-#define DBGMCU_CR_DBG_STANDBY DBGMCU_CR_DBG_STANDBY_Msk /*!< Debug Standby mode */
-#define DBGMCU_CR_TRACE_IOEN_Pos (5U)
-#define DBGMCU_CR_TRACE_IOEN_Msk (0x1U << DBGMCU_CR_TRACE_IOEN_Pos) /*!< 0x00000020 */
-#define DBGMCU_CR_TRACE_IOEN DBGMCU_CR_TRACE_IOEN_Msk /*!< Trace Pin Assignment Control */
-
-#define DBGMCU_CR_TRACE_MODE_Pos (6U)
-#define DBGMCU_CR_TRACE_MODE_Msk (0x3U << DBGMCU_CR_TRACE_MODE_Pos) /*!< 0x000000C0 */
-#define DBGMCU_CR_TRACE_MODE DBGMCU_CR_TRACE_MODE_Msk /*!< TRACE_MODE[1:0] bits (Trace Pin Assignment Control) */
-#define DBGMCU_CR_TRACE_MODE_0 (0x1U << DBGMCU_CR_TRACE_MODE_Pos) /*!< 0x00000040 */
-#define DBGMCU_CR_TRACE_MODE_1 (0x2U << DBGMCU_CR_TRACE_MODE_Pos) /*!< 0x00000080 */
-
-#define DBGMCU_CR_DBG_IWDG_STOP_Pos (8U)
-#define DBGMCU_CR_DBG_IWDG_STOP_Msk (0x1U << DBGMCU_CR_DBG_IWDG_STOP_Pos) /*!< 0x00000100 */
-#define DBGMCU_CR_DBG_IWDG_STOP DBGMCU_CR_DBG_IWDG_STOP_Msk /*!< Debug Independent Watchdog stopped when Core is halted */
-#define DBGMCU_CR_DBG_WWDG_STOP_Pos (9U)
-#define DBGMCU_CR_DBG_WWDG_STOP_Msk (0x1U << DBGMCU_CR_DBG_WWDG_STOP_Pos) /*!< 0x00000200 */
-#define DBGMCU_CR_DBG_WWDG_STOP DBGMCU_CR_DBG_WWDG_STOP_Msk /*!< Debug Window Watchdog stopped when Core is halted */
-#define DBGMCU_CR_DBG_TIM1_STOP_Pos (10U)
-#define DBGMCU_CR_DBG_TIM1_STOP_Msk (0x1U << DBGMCU_CR_DBG_TIM1_STOP_Pos) /*!< 0x00000400 */
-#define DBGMCU_CR_DBG_TIM1_STOP DBGMCU_CR_DBG_TIM1_STOP_Msk /*!< TIM1 counter stopped when core is halted */
-#define DBGMCU_CR_DBG_TIM2_STOP_Pos (11U)
-#define DBGMCU_CR_DBG_TIM2_STOP_Msk (0x1U << DBGMCU_CR_DBG_TIM2_STOP_Pos) /*!< 0x00000800 */
-#define DBGMCU_CR_DBG_TIM2_STOP DBGMCU_CR_DBG_TIM2_STOP_Msk /*!< TIM2 counter stopped when core is halted */
-#define DBGMCU_CR_DBG_TIM3_STOP_Pos (12U)
-#define DBGMCU_CR_DBG_TIM3_STOP_Msk (0x1U << DBGMCU_CR_DBG_TIM3_STOP_Pos) /*!< 0x00001000 */
-#define DBGMCU_CR_DBG_TIM3_STOP DBGMCU_CR_DBG_TIM3_STOP_Msk /*!< TIM3 counter stopped when core is halted */
-#define DBGMCU_CR_DBG_CAN1_STOP_Pos (14U)
-#define DBGMCU_CR_DBG_CAN1_STOP_Msk (0x1U << DBGMCU_CR_DBG_CAN1_STOP_Pos) /*!< 0x00004000 */
-#define DBGMCU_CR_DBG_CAN1_STOP DBGMCU_CR_DBG_CAN1_STOP_Msk /*!< Debug CAN1 stopped when Core is halted */
-#define DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT_Pos (15U)
-#define DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT_Msk (0x1U << DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT_Pos) /*!< 0x00008000 */
-#define DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT_Msk /*!< SMBUS timeout mode stopped when Core is halted */
-
-/******************************************************************************/
-/* */
-/* FLASH and Option Bytes Registers */
-/* */
-/******************************************************************************/
-/******************* Bit definition for FLASH_ACR register ******************/
-#define FLASH_ACR_LATENCY_Pos (0U)
-#define FLASH_ACR_LATENCY_Msk (0x7U << FLASH_ACR_LATENCY_Pos) /*!< 0x00000007 */
-#define FLASH_ACR_LATENCY FLASH_ACR_LATENCY_Msk /*!< LATENCY[2:0] bits (Latency) */
-#define FLASH_ACR_LATENCY_0 (0x1U << FLASH_ACR_LATENCY_Pos) /*!< 0x00000001 */
-#define FLASH_ACR_LATENCY_1 (0x2U << FLASH_ACR_LATENCY_Pos) /*!< 0x00000002 */
-#define FLASH_ACR_LATENCY_2 (0x4U << FLASH_ACR_LATENCY_Pos) /*!< 0x00000004 */
-
-#define FLASH_ACR_HLFCYA_Pos (3U)
-#define FLASH_ACR_HLFCYA_Msk (0x1U << FLASH_ACR_HLFCYA_Pos) /*!< 0x00000008 */
-#define FLASH_ACR_HLFCYA FLASH_ACR_HLFCYA_Msk /*!< Flash Half Cycle Access Enable */
-#define FLASH_ACR_PRFTBE_Pos (4U)
-#define FLASH_ACR_PRFTBE_Msk (0x1U << FLASH_ACR_PRFTBE_Pos) /*!< 0x00000010 */
-#define FLASH_ACR_PRFTBE FLASH_ACR_PRFTBE_Msk /*!< Prefetch Buffer Enable */
-#define FLASH_ACR_PRFTBS_Pos (5U)
-#define FLASH_ACR_PRFTBS_Msk (0x1U << FLASH_ACR_PRFTBS_Pos) /*!< 0x00000020 */
-#define FLASH_ACR_PRFTBS FLASH_ACR_PRFTBS_Msk /*!< Prefetch Buffer Status */
-
-/****************** Bit definition for FLASH_KEYR register ******************/
-#define FLASH_KEYR_FKEYR_Pos (0U)
-#define FLASH_KEYR_FKEYR_Msk (0xFFFFFFFFU << FLASH_KEYR_FKEYR_Pos) /*!< 0xFFFFFFFF */
-#define FLASH_KEYR_FKEYR FLASH_KEYR_FKEYR_Msk /*!< FPEC Key */
-
-#define RDP_KEY_Pos (0U)
-#define RDP_KEY_Msk (0xA5U << RDP_KEY_Pos) /*!< 0x000000A5 */
-#define RDP_KEY RDP_KEY_Msk /*!< RDP Key */
-#define FLASH_KEY1_Pos (0U)
-#define FLASH_KEY1_Msk (0x45670123U << FLASH_KEY1_Pos) /*!< 0x45670123 */
-#define FLASH_KEY1 FLASH_KEY1_Msk /*!< FPEC Key1 */
-#define FLASH_KEY2_Pos (0U)
-#define FLASH_KEY2_Msk (0xCDEF89ABU << FLASH_KEY2_Pos) /*!< 0xCDEF89AB */
-#define FLASH_KEY2 FLASH_KEY2_Msk /*!< FPEC Key2 */
-
-/***************** Bit definition for FLASH_OPTKEYR register ****************/
-#define FLASH_OPTKEYR_OPTKEYR_Pos (0U)
-#define FLASH_OPTKEYR_OPTKEYR_Msk (0xFFFFFFFFU << FLASH_OPTKEYR_OPTKEYR_Pos) /*!< 0xFFFFFFFF */
-#define FLASH_OPTKEYR_OPTKEYR FLASH_OPTKEYR_OPTKEYR_Msk /*!< Option Byte Key */
-
-#define FLASH_OPTKEY1 FLASH_KEY1 /*!< Option Byte Key1 */
-#define FLASH_OPTKEY2 FLASH_KEY2 /*!< Option Byte Key2 */
-
-/****************** Bit definition for FLASH_SR register ********************/
-#define FLASH_SR_BSY_Pos (0U)
-#define FLASH_SR_BSY_Msk (0x1U << FLASH_SR_BSY_Pos) /*!< 0x00000001 */
-#define FLASH_SR_BSY FLASH_SR_BSY_Msk /*!< Busy */
-#define FLASH_SR_PGERR_Pos (2U)
-#define FLASH_SR_PGERR_Msk (0x1U << FLASH_SR_PGERR_Pos) /*!< 0x00000004 */
-#define FLASH_SR_PGERR FLASH_SR_PGERR_Msk /*!< Programming Error */
-#define FLASH_SR_WRPRTERR_Pos (4U)
-#define FLASH_SR_WRPRTERR_Msk (0x1U << FLASH_SR_WRPRTERR_Pos) /*!< 0x00000010 */
-#define FLASH_SR_WRPRTERR FLASH_SR_WRPRTERR_Msk /*!< Write Protection Error */
-#define FLASH_SR_EOP_Pos (5U)
-#define FLASH_SR_EOP_Msk (0x1U << FLASH_SR_EOP_Pos) /*!< 0x00000020 */
-#define FLASH_SR_EOP FLASH_SR_EOP_Msk /*!< End of operation */
-
-/******************* Bit definition for FLASH_CR register *******************/
-#define FLASH_CR_PG_Pos (0U)
-#define FLASH_CR_PG_Msk (0x1U << FLASH_CR_PG_Pos) /*!< 0x00000001 */
-#define FLASH_CR_PG FLASH_CR_PG_Msk /*!< Programming */
-#define FLASH_CR_PER_Pos (1U)
-#define FLASH_CR_PER_Msk (0x1U << FLASH_CR_PER_Pos) /*!< 0x00000002 */
-#define FLASH_CR_PER FLASH_CR_PER_Msk /*!< Page Erase */
-#define FLASH_CR_MER_Pos (2U)
-#define FLASH_CR_MER_Msk (0x1U << FLASH_CR_MER_Pos) /*!< 0x00000004 */
-#define FLASH_CR_MER FLASH_CR_MER_Msk /*!< Mass Erase */
-#define FLASH_CR_OPTPG_Pos (4U)
-#define FLASH_CR_OPTPG_Msk (0x1U << FLASH_CR_OPTPG_Pos) /*!< 0x00000010 */
-#define FLASH_CR_OPTPG FLASH_CR_OPTPG_Msk /*!< Option Byte Programming */
-#define FLASH_CR_OPTER_Pos (5U)
-#define FLASH_CR_OPTER_Msk (0x1U << FLASH_CR_OPTER_Pos) /*!< 0x00000020 */
-#define FLASH_CR_OPTER FLASH_CR_OPTER_Msk /*!< Option Byte Erase */
-#define FLASH_CR_STRT_Pos (6U)
-#define FLASH_CR_STRT_Msk (0x1U << FLASH_CR_STRT_Pos) /*!< 0x00000040 */
-#define FLASH_CR_STRT FLASH_CR_STRT_Msk /*!< Start */
-#define FLASH_CR_LOCK_Pos (7U)
-#define FLASH_CR_LOCK_Msk (0x1U << FLASH_CR_LOCK_Pos) /*!< 0x00000080 */
-#define FLASH_CR_LOCK FLASH_CR_LOCK_Msk /*!< Lock */
-#define FLASH_CR_OPTWRE_Pos (9U)
-#define FLASH_CR_OPTWRE_Msk (0x1U << FLASH_CR_OPTWRE_Pos) /*!< 0x00000200 */
-#define FLASH_CR_OPTWRE FLASH_CR_OPTWRE_Msk /*!< Option Bytes Write Enable */
-#define FLASH_CR_ERRIE_Pos (10U)
-#define FLASH_CR_ERRIE_Msk (0x1U << FLASH_CR_ERRIE_Pos) /*!< 0x00000400 */
-#define FLASH_CR_ERRIE FLASH_CR_ERRIE_Msk /*!< Error Interrupt Enable */
-#define FLASH_CR_EOPIE_Pos (12U)
-#define FLASH_CR_EOPIE_Msk (0x1U << FLASH_CR_EOPIE_Pos) /*!< 0x00001000 */
-#define FLASH_CR_EOPIE FLASH_CR_EOPIE_Msk /*!< End of operation interrupt enable */
-
-/******************* Bit definition for FLASH_AR register *******************/
-#define FLASH_AR_FAR_Pos (0U)
-#define FLASH_AR_FAR_Msk (0xFFFFFFFFU << FLASH_AR_FAR_Pos) /*!< 0xFFFFFFFF */
-#define FLASH_AR_FAR FLASH_AR_FAR_Msk /*!< Flash Address */
-
-/****************** Bit definition for FLASH_OBR register *******************/
-#define FLASH_OBR_OPTERR_Pos (0U)
-#define FLASH_OBR_OPTERR_Msk (0x1U << FLASH_OBR_OPTERR_Pos) /*!< 0x00000001 */
-#define FLASH_OBR_OPTERR FLASH_OBR_OPTERR_Msk /*!< Option Byte Error */
-#define FLASH_OBR_RDPRT_Pos (1U)
-#define FLASH_OBR_RDPRT_Msk (0x1U << FLASH_OBR_RDPRT_Pos) /*!< 0x00000002 */
-#define FLASH_OBR_RDPRT FLASH_OBR_RDPRT_Msk /*!< Read protection */
-
-#define FLASH_OBR_IWDG_SW_Pos (2U)
-#define FLASH_OBR_IWDG_SW_Msk (0x1U << FLASH_OBR_IWDG_SW_Pos) /*!< 0x00000004 */
-#define FLASH_OBR_IWDG_SW FLASH_OBR_IWDG_SW_Msk /*!< IWDG SW */
-#define FLASH_OBR_nRST_STOP_Pos (3U)
-#define FLASH_OBR_nRST_STOP_Msk (0x1U << FLASH_OBR_nRST_STOP_Pos) /*!< 0x00000008 */
-#define FLASH_OBR_nRST_STOP FLASH_OBR_nRST_STOP_Msk /*!< nRST_STOP */
-#define FLASH_OBR_nRST_STDBY_Pos (4U)
-#define FLASH_OBR_nRST_STDBY_Msk (0x1U << FLASH_OBR_nRST_STDBY_Pos) /*!< 0x00000010 */
-#define FLASH_OBR_nRST_STDBY FLASH_OBR_nRST_STDBY_Msk /*!< nRST_STDBY */
-#define FLASH_OBR_USER_Pos (2U)
-#define FLASH_OBR_USER_Msk (0x7U << FLASH_OBR_USER_Pos) /*!< 0x0000001C */
-#define FLASH_OBR_USER FLASH_OBR_USER_Msk /*!< User Option Bytes */
-#define FLASH_OBR_DATA0_Pos (10U)
-#define FLASH_OBR_DATA0_Msk (0xFFU << FLASH_OBR_DATA0_Pos) /*!< 0x0003FC00 */
-#define FLASH_OBR_DATA0 FLASH_OBR_DATA0_Msk /*!< Data0 */
-#define FLASH_OBR_DATA1_Pos (18U)
-#define FLASH_OBR_DATA1_Msk (0xFFU << FLASH_OBR_DATA1_Pos) /*!< 0x03FC0000 */
-#define FLASH_OBR_DATA1 FLASH_OBR_DATA1_Msk /*!< Data1 */
-
-/****************** Bit definition for FLASH_WRPR register ******************/
-#define FLASH_WRPR_WRP_Pos (0U)
-#define FLASH_WRPR_WRP_Msk (0xFFFFFFFFU << FLASH_WRPR_WRP_Pos) /*!< 0xFFFFFFFF */
-#define FLASH_WRPR_WRP FLASH_WRPR_WRP_Msk /*!< Write Protect */
-
-/*----------------------------------------------------------------------------*/
-
-/****************** Bit definition for FLASH_RDP register *******************/
-#define FLASH_RDP_RDP_Pos (0U)
-#define FLASH_RDP_RDP_Msk (0xFFU << FLASH_RDP_RDP_Pos) /*!< 0x000000FF */
-#define FLASH_RDP_RDP FLASH_RDP_RDP_Msk /*!< Read protection option byte */
-#define FLASH_RDP_nRDP_Pos (8U)
-#define FLASH_RDP_nRDP_Msk (0xFFU << FLASH_RDP_nRDP_Pos) /*!< 0x0000FF00 */
-#define FLASH_RDP_nRDP FLASH_RDP_nRDP_Msk /*!< Read protection complemented option byte */
-
-/****************** Bit definition for FLASH_USER register ******************/
-#define FLASH_USER_USER_Pos (16U)
-#define FLASH_USER_USER_Msk (0xFFU << FLASH_USER_USER_Pos) /*!< 0x00FF0000 */
-#define FLASH_USER_USER FLASH_USER_USER_Msk /*!< User option byte */
-#define FLASH_USER_nUSER_Pos (24U)
-#define FLASH_USER_nUSER_Msk (0xFFU << FLASH_USER_nUSER_Pos) /*!< 0xFF000000 */
-#define FLASH_USER_nUSER FLASH_USER_nUSER_Msk /*!< User complemented option byte */
-
-/****************** Bit definition for FLASH_Data0 register *****************/
-#define FLASH_DATA0_DATA0_Pos (0U)
-#define FLASH_DATA0_DATA0_Msk (0xFFU << FLASH_DATA0_DATA0_Pos) /*!< 0x000000FF */
-#define FLASH_DATA0_DATA0 FLASH_DATA0_DATA0_Msk /*!< User data storage option byte */
-#define FLASH_DATA0_nDATA0_Pos (8U)
-#define FLASH_DATA0_nDATA0_Msk (0xFFU << FLASH_DATA0_nDATA0_Pos) /*!< 0x0000FF00 */
-#define FLASH_DATA0_nDATA0 FLASH_DATA0_nDATA0_Msk /*!< User data storage complemented option byte */
-
-/****************** Bit definition for FLASH_Data1 register *****************/
-#define FLASH_DATA1_DATA1_Pos (16U)
-#define FLASH_DATA1_DATA1_Msk (0xFFU << FLASH_DATA1_DATA1_Pos) /*!< 0x00FF0000 */
-#define FLASH_DATA1_DATA1 FLASH_DATA1_DATA1_Msk /*!< User data storage option byte */
-#define FLASH_DATA1_nDATA1_Pos (24U)
-#define FLASH_DATA1_nDATA1_Msk (0xFFU << FLASH_DATA1_nDATA1_Pos) /*!< 0xFF000000 */
-#define FLASH_DATA1_nDATA1 FLASH_DATA1_nDATA1_Msk /*!< User data storage complemented option byte */
-
-/****************** Bit definition for FLASH_WRP0 register ******************/
-#define FLASH_WRP0_WRP0_Pos (0U)
-#define FLASH_WRP0_WRP0_Msk (0xFFU << FLASH_WRP0_WRP0_Pos) /*!< 0x000000FF */
-#define FLASH_WRP0_WRP0 FLASH_WRP0_WRP0_Msk /*!< Flash memory write protection option bytes */
-#define FLASH_WRP0_nWRP0_Pos (8U)
-#define FLASH_WRP0_nWRP0_Msk (0xFFU << FLASH_WRP0_nWRP0_Pos) /*!< 0x0000FF00 */
-#define FLASH_WRP0_nWRP0 FLASH_WRP0_nWRP0_Msk /*!< Flash memory write protection complemented option bytes */
-
-
-
-/**
- * @}
-*/
-
-/**
- * @}
-*/
-
-/** @addtogroup Exported_macro
- * @{
- */
-
-/****************************** ADC Instances *********************************/
-#define IS_ADC_ALL_INSTANCE(INSTANCE) (((INSTANCE) == ADC1) || \
- ((INSTANCE) == ADC2))
-
-#define IS_ADC_COMMON_INSTANCE(INSTANCE) ((INSTANCE) == ADC12_COMMON)
-
-#define IS_ADC_MULTIMODE_MASTER_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
-
-#define IS_ADC_DMA_CAPABILITY_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
-
-/****************************** CAN Instances *********************************/
-#define IS_CAN_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CAN1)
-
-/****************************** CRC Instances *********************************/
-#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
-
-/****************************** DAC Instances *********************************/
-
-/****************************** DMA Instances *********************************/
-#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \
- ((INSTANCE) == DMA1_Channel2) || \
- ((INSTANCE) == DMA1_Channel3) || \
- ((INSTANCE) == DMA1_Channel4) || \
- ((INSTANCE) == DMA1_Channel5) || \
- ((INSTANCE) == DMA1_Channel6) || \
- ((INSTANCE) == DMA1_Channel7))
-
-/******************************* GPIO Instances *******************************/
-#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
- ((INSTANCE) == GPIOB) || \
- ((INSTANCE) == GPIOC) || \
- ((INSTANCE) == GPIOD))
-
-/**************************** GPIO Alternate Function Instances ***************/
-#define IS_GPIO_AF_INSTANCE(INSTANCE) IS_GPIO_ALL_INSTANCE(INSTANCE)
-
-/**************************** GPIO Lock Instances *****************************/
-#define IS_GPIO_LOCK_INSTANCE(INSTANCE) IS_GPIO_ALL_INSTANCE(INSTANCE)
-
-/******************************** I2C Instances *******************************/
-#define IS_I2C_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
-
-/****************************** IWDG Instances ********************************/
-#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
-
-/******************************** SPI Instances *******************************/
-#define IS_SPI_ALL_INSTANCE(INSTANCE) ((INSTANCE) == SPI1)
-
-/****************************** START TIM Instances ***************************/
-/****************************** TIM Instances *********************************/
-#define IS_TIM_INSTANCE(INSTANCE)\
- (((INSTANCE) == TIM1) || \
- ((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3))
-
-#define IS_TIM_CC1_INSTANCE(INSTANCE)\
- (((INSTANCE) == TIM1) || \
- ((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3))
-
-#define IS_TIM_CC2_INSTANCE(INSTANCE)\
- (((INSTANCE) == TIM1) || \
- ((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3))
-
-#define IS_TIM_CC3_INSTANCE(INSTANCE)\
- (((INSTANCE) == TIM1) || \
- ((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3))
-
-#define IS_TIM_CC4_INSTANCE(INSTANCE)\
- (((INSTANCE) == TIM1) || \
- ((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3))
-
-#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE)\
- (((INSTANCE) == TIM1) || \
- ((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3))
-
-#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE)\
- (((INSTANCE) == TIM1) || \
- ((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3))
-
-#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE)\
- (((INSTANCE) == TIM1) || \
- ((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3))
-
-#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE)\
- (((INSTANCE) == TIM1) || \
- ((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3))
-
-#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)\
- (((INSTANCE) == TIM1) || \
- ((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3))
-
-#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE)\
- (((INSTANCE) == TIM1) || \
- ((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3))
-
-#define IS_TIM_XOR_INSTANCE(INSTANCE)\
- (((INSTANCE) == TIM1) || \
- ((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3))
-
-#define IS_TIM_MASTER_INSTANCE(INSTANCE)\
- (((INSTANCE) == TIM1) || \
- ((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3))
-
-#define IS_TIM_SLAVE_INSTANCE(INSTANCE)\
- (((INSTANCE) == TIM1) || \
- ((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3))
-
-#define IS_TIM_DMABURST_INSTANCE(INSTANCE)\
- (((INSTANCE) == TIM1) || \
- ((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3))
-
-#define IS_TIM_BREAK_INSTANCE(INSTANCE)\
- ((INSTANCE) == TIM1)
-
-#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
- ((((INSTANCE) == TIM1) && \
- (((CHANNEL) == TIM_CHANNEL_1) || \
- ((CHANNEL) == TIM_CHANNEL_2) || \
- ((CHANNEL) == TIM_CHANNEL_3) || \
- ((CHANNEL) == TIM_CHANNEL_4))) \
- || \
- (((INSTANCE) == TIM2) && \
- (((CHANNEL) == TIM_CHANNEL_1) || \
- ((CHANNEL) == TIM_CHANNEL_2) || \
- ((CHANNEL) == TIM_CHANNEL_3) || \
- ((CHANNEL) == TIM_CHANNEL_4))) \
- || \
- (((INSTANCE) == TIM3) && \
- (((CHANNEL) == TIM_CHANNEL_1) || \
- ((CHANNEL) == TIM_CHANNEL_2) || \
- ((CHANNEL) == TIM_CHANNEL_3) || \
- ((CHANNEL) == TIM_CHANNEL_4))))
-
-#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
- (((INSTANCE) == TIM1) && \
- (((CHANNEL) == TIM_CHANNEL_1) || \
- ((CHANNEL) == TIM_CHANNEL_2) || \
- ((CHANNEL) == TIM_CHANNEL_3)))
-
-#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE)\
- (((INSTANCE) == TIM1) || \
- ((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3))
-
-#define IS_TIM_REPETITION_COUNTER_INSTANCE(INSTANCE)\
- ((INSTANCE) == TIM1)
-
-#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE)\
- (((INSTANCE) == TIM1) || \
- ((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3))
-
-#define IS_TIM_DMA_INSTANCE(INSTANCE)\
- (((INSTANCE) == TIM1) || \
- ((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3))
-
-#define IS_TIM_DMA_CC_INSTANCE(INSTANCE)\
- (((INSTANCE) == TIM1) || \
- ((INSTANCE) == TIM2) || \
- ((INSTANCE) == TIM3))
-
-#define IS_TIM_COMMUTATION_EVENT_INSTANCE(INSTANCE)\
- ((INSTANCE) == TIM1)
-
-/****************************** END TIM Instances *****************************/
-
-
-/******************** USART Instances : Synchronous mode **********************/
-#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
- ((INSTANCE) == USART2))
-
-/******************** UART Instances : Asynchronous mode **********************/
-#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
- ((INSTANCE) == USART2) )
-
-/******************** UART Instances : Half-Duplex mode **********************/
-#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
- ((INSTANCE) == USART2) )
-
-/******************** UART Instances : LIN mode **********************/
-#define IS_UART_LIN_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
- ((INSTANCE) == USART2) )
-
-/****************** UART Instances : Hardware Flow control ********************/
-#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
- ((INSTANCE) == USART2) )
-
-/********************* UART Instances : Smard card mode ***********************/
-#define IS_SMARTCARD_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
- ((INSTANCE) == USART2) )
-
-/*********************** UART Instances : IRDA mode ***************************/
-#define IS_IRDA_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
- ((INSTANCE) == USART2) )
-
-/***************** UART Instances : Multi-Processor mode **********************/
-#define IS_UART_MULTIPROCESSOR_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
- ((INSTANCE) == USART2) )
-
-/***************** UART Instances : DMA mode available **********************/
-#define IS_UART_DMA_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
- ((INSTANCE) == USART2) )
-
-/****************************** RTC Instances *********************************/
-#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
-
-/**************************** WWDG Instances *****************************/
-#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
-
-/****************************** USB Instances ********************************/
-#define IS_USB_ALL_INSTANCE(INSTANCE) ((INSTANCE) == USB)
-
-
-
-
-/**
- * @}
-*/
-/******************************************************************************/
-/* For a painless codes migration between the STM32F1xx device product */
-/* lines, the aliases defined below are put in place to overcome the */
-/* differences in the interrupt handlers and IRQn definitions. */
-/* No need to update developed interrupt code when moving across */
-/* product lines within the same STM32F1 Family */
-/******************************************************************************/
-
-/* Aliases for __IRQn */
-#define ADC1_IRQn ADC1_2_IRQn
-#define TIM1_BRK_TIM15_IRQn TIM1_BRK_IRQn
-#define TIM1_BRK_TIM9_IRQn TIM1_BRK_IRQn
-#define TIM9_IRQn TIM1_BRK_IRQn
-#define TIM1_TRG_COM_TIM11_IRQn TIM1_TRG_COM_IRQn
-#define TIM1_TRG_COM_TIM17_IRQn TIM1_TRG_COM_IRQn
-#define TIM11_IRQn TIM1_TRG_COM_IRQn
-#define TIM10_IRQn TIM1_UP_IRQn
-#define TIM1_UP_TIM16_IRQn TIM1_UP_IRQn
-#define TIM1_UP_TIM10_IRQn TIM1_UP_IRQn
-#define CEC_IRQn USBWakeUp_IRQn
-#define OTG_FS_WKUP_IRQn USBWakeUp_IRQn
-#define CAN1_TX_IRQn USB_HP_CAN1_TX_IRQn
-#define USB_HP_IRQn USB_HP_CAN1_TX_IRQn
-#define USB_LP_IRQn USB_LP_CAN1_RX0_IRQn
-#define CAN1_RX0_IRQn USB_LP_CAN1_RX0_IRQn
-
-
-/* Aliases for __IRQHandler */
-#define ADC1_IRQHandler ADC1_2_IRQHandler
-#define TIM1_BRK_TIM15_IRQHandler TIM1_BRK_IRQHandler
-#define TIM1_BRK_TIM9_IRQHandler TIM1_BRK_IRQHandler
-#define TIM9_IRQHandler TIM1_BRK_IRQHandler
-#define TIM1_TRG_COM_TIM11_IRQHandler TIM1_TRG_COM_IRQHandler
-#define TIM1_TRG_COM_TIM17_IRQHandler TIM1_TRG_COM_IRQHandler
-#define TIM11_IRQHandler TIM1_TRG_COM_IRQHandler
-#define TIM10_IRQHandler TIM1_UP_IRQHandler
-#define TIM1_UP_TIM16_IRQHandler TIM1_UP_IRQHandler
-#define TIM1_UP_TIM10_IRQHandler TIM1_UP_IRQHandler
-#define CEC_IRQHandler USBWakeUp_IRQHandler
-#define OTG_FS_WKUP_IRQHandler USBWakeUp_IRQHandler
-#define CAN1_TX_IRQHandler USB_HP_CAN1_TX_IRQHandler
-#define USB_HP_IRQHandler USB_HP_CAN1_TX_IRQHandler
-#define USB_LP_IRQHandler USB_LP_CAN1_RX0_IRQHandler
-#define CAN1_RX0_IRQHandler USB_LP_CAN1_RX0_IRQHandler
-
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-
-#ifdef __cplusplus
- }
-#endif /* __cplusplus */
-
-#endif /* __STM32F103x6_H */
-
-
-
- /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h b/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
deleted file mode 100644
index 7bd9429..0000000
--- a/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
+++ /dev/null
@@ -1,238 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx.h
- * @author MCD Application Team
- * @version V4.1.0
- * @date 29-April-2016
- * @brief CMSIS STM32F1xx Device Peripheral Access Layer Header File.
- *
- * The file is the unique include file that the application programmer
- * is using in the C source code, usually in main.c. This file contains:
- * - Configuration section that allows to select:
- * - The STM32F1xx device used in the target application
- * - To use or not the peripheral’s drivers in application code(i.e.
- * code will be based on direct access to peripheral’s registers
- * rather than drivers API), this option is controlled by
- * "#define USE_HAL_DRIVER"
- *
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/** @addtogroup CMSIS
- * @{
- */
-
-/** @addtogroup stm32f1xx
- * @{
- */
-
-#ifndef __STM32F1XX_H
-#define __STM32F1XX_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif /* __cplusplus */
-
-/** @addtogroup Library_configuration_section
- * @{
- */
-
-/**
- * @brief STM32 Family
- */
-#if !defined (STM32F1)
-#define STM32F1
-#endif /* STM32F1 */
-
-/* Uncomment the line below according to the target STM32L device used in your
- application
- */
-
-#if !defined (STM32F100xB) && !defined (STM32F100xE) && !defined (STM32F101x6) && \
- !defined (STM32F101xB) && !defined (STM32F101xE) && !defined (STM32F101xG) && !defined (STM32F102x6) && !defined (STM32F102xB) && !defined (STM32F103x6) && \
- !defined (STM32F103xB) && !defined (STM32F103xE) && !defined (STM32F103xG) && !defined (STM32F105xC) && !defined (STM32F107xC)
- /* #define STM32F100xB */ /*!< STM32F100C4, STM32F100R4, STM32F100C6, STM32F100R6, STM32F100C8, STM32F100R8, STM32F100V8, STM32F100CB, STM32F100RB and STM32F100VB */
- /* #define STM32F100xE */ /*!< STM32F100RC, STM32F100VC, STM32F100ZC, STM32F100RD, STM32F100VD, STM32F100ZD, STM32F100RE, STM32F100VE and STM32F100ZE */
- /* #define STM32F101x6 */ /*!< STM32F101C4, STM32F101R4, STM32F101T4, STM32F101C6, STM32F101R6 and STM32F101T6 Devices */
- /* #define STM32F101xB */ /*!< STM32F101C8, STM32F101R8, STM32F101T8, STM32F101V8, STM32F101CB, STM32F101RB, STM32F101TB and STM32F101VB */
- /* #define STM32F101xE */ /*!< STM32F101RC, STM32F101VC, STM32F101ZC, STM32F101RD, STM32F101VD, STM32F101ZD, STM32F101RE, STM32F101VE and STM32F101ZE */
- /* #define STM32F101xG */ /*!< STM32F101RF, STM32F101VF, STM32F101ZF, STM32F101RG, STM32F101VG and STM32F101ZG */
- /* #define STM32F102x6 */ /*!< STM32F102C4, STM32F102R4, STM32F102C6 and STM32F102R6 */
- /* #define STM32F102xB */ /*!< STM32F102C8, STM32F102R8, STM32F102CB and STM32F102RB */
- /* #define STM32F103x6 */ /*!< STM32F103C4, STM32F103R4, STM32F103T4, STM32F103C6, STM32F103R6 and STM32F103T6 */
- /* #define STM32F103xB */ /*!< STM32F103C8, STM32F103R8, STM32F103T8, STM32F103V8, STM32F103CB, STM32F103RB, STM32F103TB and STM32F103VB */
- /* #define STM32F103xE */ /*!< STM32F103RC, STM32F103VC, STM32F103ZC, STM32F103RD, STM32F103VD, STM32F103ZD, STM32F103RE, STM32F103VE and STM32F103ZE */
- /* #define STM32F103xG */ /*!< STM32F103RF, STM32F103VF, STM32F103ZF, STM32F103RG, STM32F103VG and STM32F103ZG */
- /* #define STM32F105xC */ /*!< STM32F105R8, STM32F105V8, STM32F105RB, STM32F105VB, STM32F105RC and STM32F105VC */
- /* #define STM32F107xC */ /*!< STM32F107RB, STM32F107VB, STM32F107RC and STM32F107VC */
-#endif
-
-/* Tip: To avoid modifying this file each time you need to switch between these
- devices, you can define the device in your toolchain compiler preprocessor.
- */
-
-#if !defined (USE_HAL_DRIVER)
-/**
- * @brief Comment the line below if you will not use the peripherals drivers.
- In this case, these drivers will not be included and the application code will
- be based on direct access to peripherals registers
- */
- /*#define USE_HAL_DRIVER */
-#endif /* USE_HAL_DRIVER */
-
-/**
- * @brief CMSIS Device version number
- */
-#define __STM32F1_CMSIS_VERSION_MAIN (0x04) /*!< [31:24] main version */
-#define __STM32F1_CMSIS_VERSION_SUB1 (0x01) /*!< [23:16] sub1 version */
-#define __STM32F1_CMSIS_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
-#define __STM32F1_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */
-#define __STM32F1_CMSIS_VERSION ((__STM32F1_CMSIS_VERSION_MAIN << 24)\
- |(__STM32F1_CMSIS_VERSION_SUB1 << 16)\
- |(__STM32F1_CMSIS_VERSION_SUB2 << 8 )\
- |(__STM32F1_CMSIS_VERSION_RC))
-
-/**
- * @}
- */
-
-/** @addtogroup Device_Included
- * @{
- */
-
-#if defined(STM32F100xB)
- #include "stm32f100xb.h"
-#elif defined(STM32F100xE)
- #include "stm32f100xe.h"
-#elif defined(STM32F101x6)
- #include "stm32f101x6.h"
-#elif defined(STM32F101xB)
- #include "stm32f101xb.h"
-#elif defined(STM32F101xE)
- #include "stm32f101xe.h"
-#elif defined(STM32F101xG)
- #include "stm32f101xg.h"
-#elif defined(STM32F102x6)
- #include "stm32f102x6.h"
-#elif defined(STM32F102xB)
- #include "stm32f102xb.h"
-#elif defined(STM32F103x6)
- #include "stm32f103x6.h"
-#elif defined(STM32F103xB)
- #include "stm32f103xb.h"
-#elif defined(STM32F103xE)
- #include "stm32f103xe.h"
-#elif defined(STM32F103xG)
- #include "stm32f103xg.h"
-#elif defined(STM32F105xC)
- #include "stm32f105xc.h"
-#elif defined(STM32F107xC)
- #include "stm32f107xc.h"
-#else
- #error "Please select first the target STM32F1xx device used in your application (in stm32f1xx.h file)"
-#endif
-
-/**
- * @}
- */
-
-/** @addtogroup Exported_types
- * @{
- */
-typedef enum
-{
- RESET = 0,
- SET = !RESET
-} FlagStatus, ITStatus;
-
-typedef enum
-{
- DISABLE = 0,
- ENABLE = !DISABLE
-} FunctionalState;
-#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
-
-typedef enum
-{
- ERROR = 0,
- SUCCESS = !ERROR
-} ErrorStatus;
-
-/**
- * @}
- */
-
-
-/** @addtogroup Exported_macros
- * @{
- */
-#define SET_BIT(REG, BIT) ((REG) |= (BIT))
-
-#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
-
-#define READ_BIT(REG, BIT) ((REG) & (BIT))
-
-#define CLEAR_REG(REG) ((REG) = (0x0))
-
-#define WRITE_REG(REG, VAL) ((REG) = (VAL))
-
-#define READ_REG(REG) ((REG))
-
-#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
-
-#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
-
-
-/**
- * @}
- */
-
-#if defined (USE_HAL_DRIVER)
- #include "stm32f1xx_hal.h"
-#endif /* USE_HAL_DRIVER */
-
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* __STM32F1xx_H */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h b/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
deleted file mode 100644
index 7d23de6..0000000
--- a/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/**
- ******************************************************************************
- * @file system_stm32f10x.h
- * @author MCD Application Team
- * @version V4.1.0
- * @date 29-April-2016
- * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Header File.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/** @addtogroup CMSIS
- * @{
- */
-
-/** @addtogroup stm32f10x_system
- * @{
- */
-
-/**
- * @brief Define to prevent recursive inclusion
- */
-#ifndef __SYSTEM_STM32F10X_H
-#define __SYSTEM_STM32F10X_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/** @addtogroup STM32F10x_System_Includes
- * @{
- */
-
-/**
- * @}
- */
-
-
-/** @addtogroup STM32F10x_System_Exported_types
- * @{
- */
-
-extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
-extern const uint8_t AHBPrescTable[16]; /*!< AHB prescalers table values */
-extern const uint8_t APBPrescTable[8]; /*!< APB prescalers table values */
-
-/**
- * @}
- */
-
-/** @addtogroup STM32F10x_System_Exported_Constants
- * @{
- */
-
-/**
- * @}
- */
-
-/** @addtogroup STM32F10x_System_Exported_Macros
- * @{
- */
-
-/**
- * @}
- */
-
-/** @addtogroup STM32F10x_System_Exported_Functions
- * @{
- */
-
-extern void SystemInit(void);
-extern void SystemCoreClockUpdate(void);
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /*__SYSTEM_STM32F10X_H */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c b/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c
deleted file mode 100644
index 9d07f89..0000000
--- a/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c
+++ /dev/null
@@ -1,448 +0,0 @@
-/**
- ******************************************************************************
- * @file system_stm32f1xx.c
- * @author MCD Application Team
- * @version V4.1.0
- * @date 29-April-2016
- * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
- *
- * 1. This file provides two functions and one global variable to be called from
- * user application:
- * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
- * factors, AHB/APBx prescalers and Flash settings).
- * This function is called at startup just after reset and
- * before branch to main program. This call is made inside
- * the "startup_stm32f1xx_xx.s" file.
- *
- * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
- * by the user application to setup the SysTick
- * timer or configure other parameters.
- *
- * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
- * be called whenever the core clock is changed
- * during program execution.
- *
- * 2. After each device reset the HSI (8 MHz) is used as system clock source.
- * Then SystemInit() function is called, in "startup_stm32f1xx_xx.s" file, to
- * configure the system clock before to branch to main program.
- *
- * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depending on
- * the product used), refer to "HSE_VALUE".
- * When HSE is used as system clock source, directly or through PLL, and you
- * are using different crystal you have to adapt the HSE value to your own
- * configuration.
- *
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/** @addtogroup CMSIS
- * @{
- */
-
-/** @addtogroup stm32f1xx_system
- * @{
- */
-
-/** @addtogroup STM32F1xx_System_Private_Includes
- * @{
- */
-
-#include "stm32f1xx.h"
-
-/**
- * @}
- */
-
-/** @addtogroup STM32F1xx_System_Private_TypesDefinitions
- * @{
- */
-
-/**
- * @}
- */
-
-/** @addtogroup STM32F1xx_System_Private_Defines
- * @{
- */
-
-#if !defined (HSE_VALUE)
- #define HSE_VALUE ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz.
- This value can be provided and adapted by the user application. */
-#endif /* HSE_VALUE */
-
-#if !defined (HSI_VALUE)
- #define HSI_VALUE ((uint32_t)8000000) /*!< Default value of the Internal oscillator in Hz.
- This value can be provided and adapted by the user application. */
-#endif /* HSI_VALUE */
-
-/*!< Uncomment the following line if you need to use external SRAM */
-#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
-/* #define DATA_IN_ExtSRAM */
-#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
-
-/*!< Uncomment the following line if you need to relocate your vector Table in
- Internal SRAM. */
-/* #define VECT_TAB_SRAM */
-#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field.
- This value must be a multiple of 0x200. */
-
-
-/**
- * @}
- */
-
-/** @addtogroup STM32F1xx_System_Private_Macros
- * @{
- */
-
-/**
- * @}
- */
-
-/** @addtogroup STM32F1xx_System_Private_Variables
- * @{
- */
-
-/*******************************************************************************
-* Clock Definitions
-*******************************************************************************/
-#if defined(STM32F100xB) ||defined(STM32F100xE)
- uint32_t SystemCoreClock = 24000000; /*!< System Clock Frequency (Core Clock) */
-#else /*!< HSI Selected as System Clock source */
- uint32_t SystemCoreClock = 72000000; /*!< System Clock Frequency (Core Clock) */
-#endif
-
-const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
-const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
-
-/**
- * @}
- */
-
-/** @addtogroup STM32F1xx_System_Private_FunctionPrototypes
- * @{
- */
-
-#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
-#ifdef DATA_IN_ExtSRAM
- static void SystemInit_ExtMemCtl(void);
-#endif /* DATA_IN_ExtSRAM */
-#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
-
-/**
- * @}
- */
-
-/** @addtogroup STM32F1xx_System_Private_Functions
- * @{
- */
-
-/**
- * @brief Setup the microcontroller system
- * Initialize the Embedded Flash Interface, the PLL and update the
- * SystemCoreClock variable.
- * @note This function should be used only after reset.
- * @param None
- * @retval None
- */
-void SystemInit (void)
-{
- /* Reset the RCC clock configuration to the default reset state(for debug purpose) */
- /* Set HSION bit */
- RCC->CR |= (uint32_t)0x00000001;
-
- /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
-#if !defined(STM32F105xC) && !defined(STM32F107xC)
- RCC->CFGR &= (uint32_t)0xF8FF0000;
-#else
- RCC->CFGR &= (uint32_t)0xF0FF0000;
-#endif /* STM32F105xC */
-
- /* Reset HSEON, CSSON and PLLON bits */
- RCC->CR &= (uint32_t)0xFEF6FFFF;
-
- /* Reset HSEBYP bit */
- RCC->CR &= (uint32_t)0xFFFBFFFF;
-
- /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
- RCC->CFGR &= (uint32_t)0xFF80FFFF;
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
- /* Reset PLL2ON and PLL3ON bits */
- RCC->CR &= (uint32_t)0xEBFFFFFF;
-
- /* Disable all interrupts and clear pending bits */
- RCC->CIR = 0x00FF0000;
-
- /* Reset CFGR2 register */
- RCC->CFGR2 = 0x00000000;
-#elif defined(STM32F100xB) || defined(STM32F100xE)
- /* Disable all interrupts and clear pending bits */
- RCC->CIR = 0x009F0000;
-
- /* Reset CFGR2 register */
- RCC->CFGR2 = 0x00000000;
-#else
- /* Disable all interrupts and clear pending bits */
- RCC->CIR = 0x009F0000;
-#endif /* STM32F105xC */
-
-#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
- #ifdef DATA_IN_ExtSRAM
- SystemInit_ExtMemCtl();
- #endif /* DATA_IN_ExtSRAM */
-#endif
-
-#ifdef VECT_TAB_SRAM
- SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
-#else
- SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
-#endif
-}
-
-/**
- * @brief Update SystemCoreClock variable according to Clock Register Values.
- * The SystemCoreClock variable contains the core clock (HCLK), it can
- * be used by the user application to setup the SysTick timer or configure
- * other parameters.
- *
- * @note Each time the core clock (HCLK) changes, this function must be called
- * to update SystemCoreClock variable value. Otherwise, any configuration
- * based on this variable will be incorrect.
- *
- * @note - The system frequency computed by this function is not the real
- * frequency in the chip. It is calculated based on the predefined
- * constant and the selected clock source:
- *
- * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
- *
- * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
- *
- * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
- * or HSI_VALUE(*) multiplied by the PLL factors.
- *
- * (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
- * 8 MHz) but the real value may vary depending on the variations
- * in voltage and temperature.
- *
- * (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
- * 8 MHz or 25 MHz, depending on the product used), user has to ensure
- * that HSE_VALUE is same as the real frequency of the crystal used.
- * Otherwise, this function may have wrong result.
- *
- * - The result of this function could be not correct when using fractional
- * value for HSE crystal.
- * @param None
- * @retval None
- */
-void SystemCoreClockUpdate (void)
-{
- uint32_t tmp = 0, pllmull = 0, pllsource = 0;
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
- uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0;
-#endif /* STM32F105xC */
-
-#if defined(STM32F100xB) || defined(STM32F100xE)
- uint32_t prediv1factor = 0;
-#endif /* STM32F100xB or STM32F100xE */
-
- /* Get SYSCLK source -------------------------------------------------------*/
- tmp = RCC->CFGR & RCC_CFGR_SWS;
-
- switch (tmp)
- {
- case 0x00: /* HSI used as system clock */
- SystemCoreClock = HSI_VALUE;
- break;
- case 0x04: /* HSE used as system clock */
- SystemCoreClock = HSE_VALUE;
- break;
- case 0x08: /* PLL used as system clock */
-
- /* Get PLL clock source and multiplication factor ----------------------*/
- pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
- pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
-
-#if !defined(STM32F105xC) && !defined(STM32F107xC)
- pllmull = ( pllmull >> 18) + 2;
-
- if (pllsource == 0x00)
- {
- /* HSI oscillator clock divided by 2 selected as PLL clock entry */
- SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
- }
- else
- {
- #if defined(STM32F100xB) || defined(STM32F100xE)
- prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
- /* HSE oscillator clock selected as PREDIV1 clock entry */
- SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;
- #else
- /* HSE selected as PLL clock entry */
- if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
- {/* HSE oscillator clock divided by 2 */
- SystemCoreClock = (HSE_VALUE >> 1) * pllmull;
- }
- else
- {
- SystemCoreClock = HSE_VALUE * pllmull;
- }
- #endif
- }
-#else
- pllmull = pllmull >> 18;
-
- if (pllmull != 0x0D)
- {
- pllmull += 2;
- }
- else
- { /* PLL multiplication factor = PLL input clock * 6.5 */
- pllmull = 13 / 2;
- }
-
- if (pllsource == 0x00)
- {
- /* HSI oscillator clock divided by 2 selected as PLL clock entry */
- SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
- }
- else
- {/* PREDIV1 selected as PLL clock entry */
-
- /* Get PREDIV1 clock source and division factor */
- prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
- prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
-
- if (prediv1source == 0)
- {
- /* HSE oscillator clock selected as PREDIV1 clock entry */
- SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;
- }
- else
- {/* PLL2 clock selected as PREDIV1 clock entry */
-
- /* Get PREDIV2 division factor and PLL2 multiplication factor */
- prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1;
- pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2;
- SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;
- }
- }
-#endif /* STM32F105xC */
- break;
-
- default:
- SystemCoreClock = HSI_VALUE;
- break;
- }
-
- /* Compute HCLK clock frequency ----------------*/
- /* Get HCLK prescaler */
- tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
- /* HCLK clock frequency */
- SystemCoreClock >>= tmp;
-}
-
-#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
-/**
- * @brief Setup the external memory controller. Called in startup_stm32f1xx.s
- * before jump to __main
- * @param None
- * @retval None
- */
-#ifdef DATA_IN_ExtSRAM
-/**
- * @brief Setup the external memory controller.
- * Called in startup_stm32f1xx_xx.s/.c before jump to main.
- * This function configures the external SRAM mounted on STM3210E-EVAL
- * board (STM32 High density devices). This SRAM will be used as program
- * data memory (including heap and stack).
- * @param None
- * @retval None
- */
-void SystemInit_ExtMemCtl(void)
-{
- __IO uint32_t tmpreg;
- /*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is
- required, then adjust the Register Addresses */
-
- /* Enable FSMC clock */
- RCC->AHBENR = 0x00000114;
-
- /* Delay after an RCC peripheral clock enabling */
- tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);
-
- /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */
- RCC->APB2ENR = 0x000001E0;
-
- /* Delay after an RCC peripheral clock enabling */
- tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN);
-
- (void)(tmpreg);
-
-/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/
-/*---------------- SRAM Address lines configuration -------------------------*/
-/*---------------- NOE and NWE configuration --------------------------------*/
-/*---------------- NE3 configuration ----------------------------------------*/
-/*---------------- NBL0, NBL1 configuration ---------------------------------*/
-
- GPIOD->CRL = 0x44BB44BB;
- GPIOD->CRH = 0xBBBBBBBB;
-
- GPIOE->CRL = 0xB44444BB;
- GPIOE->CRH = 0xBBBBBBBB;
-
- GPIOF->CRL = 0x44BBBBBB;
- GPIOF->CRH = 0xBBBB4444;
-
- GPIOG->CRL = 0x44BBBBBB;
- GPIOG->CRH = 0x444B4B44;
-
-/*---------------- FSMC Configuration ---------------------------------------*/
-/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/
-
- FSMC_Bank1->BTCR[4] = 0x00001091;
- FSMC_Bank1->BTCR[5] = 0x00110212;
-}
-#endif /* DATA_IN_ExtSRAM */
-#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/CMSIS/Include/arm_common_tables.h b/stm32cubemx/Drivers/CMSIS/Include/arm_common_tables.h
deleted file mode 100644
index 8742a56..0000000
--- a/stm32cubemx/Drivers/CMSIS/Include/arm_common_tables.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/* ----------------------------------------------------------------------
-* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
-*
-* $Date: 19. October 2015
-* $Revision: V.1.4.5 a
-*
-* Project: CMSIS DSP Library
-* Title: arm_common_tables.h
-*
-* Description: This file has extern declaration for common tables like Bitreverse, reciprocal etc which are used across different functions
-*
-* Target Processor: Cortex-M4/Cortex-M3
-*
-* Redistribution and use in source and binary forms, with or without
-* modification, are permitted provided that the following conditions
-* are met:
-* - Redistributions of source code must retain the above copyright
-* notice, this list of conditions and the following disclaimer.
-* - Redistributions in binary form must reproduce the above copyright
-* notice, this list of conditions and the following disclaimer in
-* the documentation and/or other materials provided with the
-* distribution.
-* - Neither the name of ARM LIMITED nor the names of its contributors
-* may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-* POSSIBILITY OF SUCH DAMAGE.
-* -------------------------------------------------------------------- */
-
-#ifndef _ARM_COMMON_TABLES_H
-#define _ARM_COMMON_TABLES_H
-
-#include "arm_math.h"
-
-extern const uint16_t armBitRevTable[1024];
-extern const q15_t armRecipTableQ15[64];
-extern const q31_t armRecipTableQ31[64];
-/* extern const q31_t realCoefAQ31[1024]; */
-/* extern const q31_t realCoefBQ31[1024]; */
-extern const float32_t twiddleCoef_16[32];
-extern const float32_t twiddleCoef_32[64];
-extern const float32_t twiddleCoef_64[128];
-extern const float32_t twiddleCoef_128[256];
-extern const float32_t twiddleCoef_256[512];
-extern const float32_t twiddleCoef_512[1024];
-extern const float32_t twiddleCoef_1024[2048];
-extern const float32_t twiddleCoef_2048[4096];
-extern const float32_t twiddleCoef_4096[8192];
-#define twiddleCoef twiddleCoef_4096
-extern const q31_t twiddleCoef_16_q31[24];
-extern const q31_t twiddleCoef_32_q31[48];
-extern const q31_t twiddleCoef_64_q31[96];
-extern const q31_t twiddleCoef_128_q31[192];
-extern const q31_t twiddleCoef_256_q31[384];
-extern const q31_t twiddleCoef_512_q31[768];
-extern const q31_t twiddleCoef_1024_q31[1536];
-extern const q31_t twiddleCoef_2048_q31[3072];
-extern const q31_t twiddleCoef_4096_q31[6144];
-extern const q15_t twiddleCoef_16_q15[24];
-extern const q15_t twiddleCoef_32_q15[48];
-extern const q15_t twiddleCoef_64_q15[96];
-extern const q15_t twiddleCoef_128_q15[192];
-extern const q15_t twiddleCoef_256_q15[384];
-extern const q15_t twiddleCoef_512_q15[768];
-extern const q15_t twiddleCoef_1024_q15[1536];
-extern const q15_t twiddleCoef_2048_q15[3072];
-extern const q15_t twiddleCoef_4096_q15[6144];
-extern const float32_t twiddleCoef_rfft_32[32];
-extern const float32_t twiddleCoef_rfft_64[64];
-extern const float32_t twiddleCoef_rfft_128[128];
-extern const float32_t twiddleCoef_rfft_256[256];
-extern const float32_t twiddleCoef_rfft_512[512];
-extern const float32_t twiddleCoef_rfft_1024[1024];
-extern const float32_t twiddleCoef_rfft_2048[2048];
-extern const float32_t twiddleCoef_rfft_4096[4096];
-
-
-/* floating-point bit reversal tables */
-#define ARMBITREVINDEXTABLE__16_TABLE_LENGTH ((uint16_t)20 )
-#define ARMBITREVINDEXTABLE__32_TABLE_LENGTH ((uint16_t)48 )
-#define ARMBITREVINDEXTABLE__64_TABLE_LENGTH ((uint16_t)56 )
-#define ARMBITREVINDEXTABLE_128_TABLE_LENGTH ((uint16_t)208 )
-#define ARMBITREVINDEXTABLE_256_TABLE_LENGTH ((uint16_t)440 )
-#define ARMBITREVINDEXTABLE_512_TABLE_LENGTH ((uint16_t)448 )
-#define ARMBITREVINDEXTABLE1024_TABLE_LENGTH ((uint16_t)1800)
-#define ARMBITREVINDEXTABLE2048_TABLE_LENGTH ((uint16_t)3808)
-#define ARMBITREVINDEXTABLE4096_TABLE_LENGTH ((uint16_t)4032)
-
-extern const uint16_t armBitRevIndexTable16[ARMBITREVINDEXTABLE__16_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable32[ARMBITREVINDEXTABLE__32_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable64[ARMBITREVINDEXTABLE__64_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable128[ARMBITREVINDEXTABLE_128_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable256[ARMBITREVINDEXTABLE_256_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable512[ARMBITREVINDEXTABLE_512_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable1024[ARMBITREVINDEXTABLE1024_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable2048[ARMBITREVINDEXTABLE2048_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable4096[ARMBITREVINDEXTABLE4096_TABLE_LENGTH];
-
-/* fixed-point bit reversal tables */
-#define ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH ((uint16_t)12 )
-#define ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH ((uint16_t)24 )
-#define ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH ((uint16_t)56 )
-#define ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH ((uint16_t)112 )
-#define ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH ((uint16_t)240 )
-#define ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH ((uint16_t)480 )
-#define ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH ((uint16_t)992 )
-#define ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH ((uint16_t)1984)
-#define ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH ((uint16_t)4032)
-
-extern const uint16_t armBitRevIndexTable_fixed_16[ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable_fixed_32[ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable_fixed_64[ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable_fixed_128[ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable_fixed_256[ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable_fixed_512[ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable_fixed_1024[ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable_fixed_2048[ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH];
-extern const uint16_t armBitRevIndexTable_fixed_4096[ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH];
-
-/* Tables for Fast Math Sine and Cosine */
-extern const float32_t sinTable_f32[FAST_MATH_TABLE_SIZE + 1];
-extern const q31_t sinTable_q31[FAST_MATH_TABLE_SIZE + 1];
-extern const q15_t sinTable_q15[FAST_MATH_TABLE_SIZE + 1];
-
-#endif /* ARM_COMMON_TABLES_H */
diff --git a/stm32cubemx/Drivers/CMSIS/Include/arm_const_structs.h b/stm32cubemx/Drivers/CMSIS/Include/arm_const_structs.h
deleted file mode 100644
index 726d06e..0000000
--- a/stm32cubemx/Drivers/CMSIS/Include/arm_const_structs.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/* ----------------------------------------------------------------------
-* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
-*
-* $Date: 19. March 2015
-* $Revision: V.1.4.5
-*
-* Project: CMSIS DSP Library
-* Title: arm_const_structs.h
-*
-* Description: This file has constant structs that are initialized for
-* user convenience. For example, some can be given as
-* arguments to the arm_cfft_f32() function.
-*
-* Target Processor: Cortex-M4/Cortex-M3
-*
-* Redistribution and use in source and binary forms, with or without
-* modification, are permitted provided that the following conditions
-* are met:
-* - Redistributions of source code must retain the above copyright
-* notice, this list of conditions and the following disclaimer.
-* - Redistributions in binary form must reproduce the above copyright
-* notice, this list of conditions and the following disclaimer in
-* the documentation and/or other materials provided with the
-* distribution.
-* - Neither the name of ARM LIMITED nor the names of its contributors
-* may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-* POSSIBILITY OF SUCH DAMAGE.
-* -------------------------------------------------------------------- */
-
-#ifndef _ARM_CONST_STRUCTS_H
-#define _ARM_CONST_STRUCTS_H
-
-#include "arm_math.h"
-#include "arm_common_tables.h"
-
- extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len16;
- extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len32;
- extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len64;
- extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len128;
- extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len256;
- extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len512;
- extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len1024;
- extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len2048;
- extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len4096;
-
- extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len16;
- extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len32;
- extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len64;
- extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len128;
- extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len256;
- extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len512;
- extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len1024;
- extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len2048;
- extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len4096;
-
- extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len16;
- extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len32;
- extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len64;
- extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len128;
- extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len256;
- extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len512;
- extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len1024;
- extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len2048;
- extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len4096;
-
-#endif
diff --git a/stm32cubemx/Drivers/CMSIS/Include/arm_math.h b/stm32cubemx/Drivers/CMSIS/Include/arm_math.h
deleted file mode 100644
index d33f8a9..0000000
--- a/stm32cubemx/Drivers/CMSIS/Include/arm_math.h
+++ /dev/null
@@ -1,7154 +0,0 @@
-/* ----------------------------------------------------------------------
-* Copyright (C) 2010-2015 ARM Limited. All rights reserved.
-*
-* $Date: 20. October 2015
-* $Revision: V1.4.5 b
-*
-* Project: CMSIS DSP Library
-* Title: arm_math.h
-*
-* Description: Public header file for CMSIS DSP Library
-*
-* Target Processor: Cortex-M7/Cortex-M4/Cortex-M3/Cortex-M0
-*
-* Redistribution and use in source and binary forms, with or without
-* modification, are permitted provided that the following conditions
-* are met:
-* - Redistributions of source code must retain the above copyright
-* notice, this list of conditions and the following disclaimer.
-* - Redistributions in binary form must reproduce the above copyright
-* notice, this list of conditions and the following disclaimer in
-* the documentation and/or other materials provided with the
-* distribution.
-* - Neither the name of ARM LIMITED nor the names of its contributors
-* may be used to endorse or promote products derived from this
-* software without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-* POSSIBILITY OF SUCH DAMAGE.
- * -------------------------------------------------------------------- */
-
-/**
- \mainpage CMSIS DSP Software Library
- *
- * Introduction
- * ------------
- *
- * This user manual describes the CMSIS DSP software library,
- * a suite of common signal processing functions for use on Cortex-M processor based devices.
- *
- * The library is divided into a number of functions each covering a specific category:
- * - Basic math functions
- * - Fast math functions
- * - Complex math functions
- * - Filters
- * - Matrix functions
- * - Transforms
- * - Motor control functions
- * - Statistical functions
- * - Support functions
- * - Interpolation functions
- *
- * The library has separate functions for operating on 8-bit integers, 16-bit integers,
- * 32-bit integer and 32-bit floating-point values.
- *
- * Using the Library
- * ------------
- *
- * The library installer contains prebuilt versions of the libraries in the <code>Lib</code> folder.
- * - arm_cortexM7lfdp_math.lib (Little endian and Double Precision Floating Point Unit on Cortex-M7)
- * - arm_cortexM7bfdp_math.lib (Big endian and Double Precision Floating Point Unit on Cortex-M7)
- * - arm_cortexM7lfsp_math.lib (Little endian and Single Precision Floating Point Unit on Cortex-M7)
- * - arm_cortexM7bfsp_math.lib (Big endian and Single Precision Floating Point Unit on Cortex-M7)
- * - arm_cortexM7l_math.lib (Little endian on Cortex-M7)
- * - arm_cortexM7b_math.lib (Big endian on Cortex-M7)
- * - arm_cortexM4lf_math.lib (Little endian and Floating Point Unit on Cortex-M4)
- * - arm_cortexM4bf_math.lib (Big endian and Floating Point Unit on Cortex-M4)
- * - arm_cortexM4l_math.lib (Little endian on Cortex-M4)
- * - arm_cortexM4b_math.lib (Big endian on Cortex-M4)
- * - arm_cortexM3l_math.lib (Little endian on Cortex-M3)
- * - arm_cortexM3b_math.lib (Big endian on Cortex-M3)
- * - arm_cortexM0l_math.lib (Little endian on Cortex-M0 / CortexM0+)
- * - arm_cortexM0b_math.lib (Big endian on Cortex-M0 / CortexM0+)
- *
- * The library functions are declared in the public file <code>arm_math.h</code> which is placed in the <code>Include</code> folder.
- * Simply include this file and link the appropriate library in the application and begin calling the library functions. The Library supports single
- * public header file <code> arm_math.h</code> for Cortex-M7/M4/M3/M0/M0+ with little endian and big endian. Same header file will be used for floating point unit(FPU) variants.
- * Define the appropriate pre processor MACRO ARM_MATH_CM7 or ARM_MATH_CM4 or ARM_MATH_CM3 or
- * ARM_MATH_CM0 or ARM_MATH_CM0PLUS depending on the target processor in the application.
- *
- * Examples
- * --------
- *
- * The library ships with a number of examples which demonstrate how to use the library functions.
- *
- * Toolchain Support
- * ------------
- *
- * The library has been developed and tested with MDK-ARM version 5.14.0.0
- * The library is being tested in GCC and IAR toolchains and updates on this activity will be made available shortly.
- *
- * Building the Library
- * ------------
- *
- * The library installer contains a project file to re build libraries on MDK-ARM Tool chain in the <code>CMSIS\\DSP_Lib\\Source\\ARM</code> folder.
- * - arm_cortexM_math.uvprojx
- *
- *
- * The libraries can be built by opening the arm_cortexM_math.uvprojx project in MDK-ARM, selecting a specific target, and defining the optional pre processor MACROs detailed above.
- *
- * Pre-processor Macros
- * ------------
- *
- * Each library project have differant pre-processor macros.
- *
- * - UNALIGNED_SUPPORT_DISABLE:
- *
- * Define macro UNALIGNED_SUPPORT_DISABLE, If the silicon does not support unaligned memory access
- *
- * - ARM_MATH_BIG_ENDIAN:
- *
- * Define macro ARM_MATH_BIG_ENDIAN to build the library for big endian targets. By default library builds for little endian targets.
- *
- * - ARM_MATH_MATRIX_CHECK:
- *
- * Define macro ARM_MATH_MATRIX_CHECK for checking on the input and output sizes of matrices
- *
- * - ARM_MATH_ROUNDING:
- *
- * Define macro ARM_MATH_ROUNDING for rounding on support functions
- *
- * - ARM_MATH_CMx:
- *
- * Define macro ARM_MATH_CM4 for building the library on Cortex-M4 target, ARM_MATH_CM3 for building library on Cortex-M3 target
- * and ARM_MATH_CM0 for building library on Cortex-M0 target, ARM_MATH_CM0PLUS for building library on Cortex-M0+ target, and
- * ARM_MATH_CM7 for building the library on cortex-M7.
- *
- * - __FPU_PRESENT:
- *
- * Initialize macro __FPU_PRESENT = 1 when building on FPU supported Targets. Enable this macro for M4bf and M4lf libraries
- *
- * <hr>
- * CMSIS-DSP in ARM::CMSIS Pack
- * -----------------------------
- *
- * The following files relevant to CMSIS-DSP are present in the <b>ARM::CMSIS</b> Pack directories:
- * |File/Folder |Content |
- * |------------------------------|------------------------------------------------------------------------|
- * |\b CMSIS\\Documentation\\DSP | This documentation |
- * |\b CMSIS\\DSP_Lib | Software license agreement (license.txt) |
- * |\b CMSIS\\DSP_Lib\\Examples | Example projects demonstrating the usage of the library functions |
- * |\b CMSIS\\DSP_Lib\\Source | Source files for rebuilding the library |
- *
- * <hr>
- * Revision History of CMSIS-DSP
- * ------------
- * Please refer to \ref ChangeLog_pg.
- *
- * Copyright Notice
- * ------------
- *
- * Copyright (C) 2010-2015 ARM Limited. All rights reserved.
- */
-
-
-/**
- * @defgroup groupMath Basic Math Functions
- */
-
-/**
- * @defgroup groupFastMath Fast Math Functions
- * This set of functions provides a fast approximation to sine, cosine, and square root.
- * As compared to most of the other functions in the CMSIS math library, the fast math functions
- * operate on individual values and not arrays.
- * There are separate functions for Q15, Q31, and floating-point data.
- *
- */
-
-/**
- * @defgroup groupCmplxMath Complex Math Functions
- * This set of functions operates on complex data vectors.
- * The data in the complex arrays is stored in an interleaved fashion
- * (real, imag, real, imag, ...).
- * In the API functions, the number of samples in a complex array refers
- * to the number of complex values; the array contains twice this number of
- * real values.
- */
-
-/**
- * @defgroup groupFilters Filtering Functions
- */
-
-/**
- * @defgroup groupMatrix Matrix Functions
- *
- * This set of functions provides basic matrix math operations.
- * The functions operate on matrix data structures. For example,
- * the type
- * definition for the floating-point matrix structure is shown
- * below:
- * <pre>
- * typedef struct
- * {
- * uint16_t numRows; // number of rows of the matrix.
- * uint16_t numCols; // number of columns of the matrix.
- * float32_t *pData; // points to the data of the matrix.
- * } arm_matrix_instance_f32;
- * </pre>
- * There are similar definitions for Q15 and Q31 data types.
- *
- * The structure specifies the size of the matrix and then points to
- * an array of data. The array is of size <code>numRows X numCols</code>
- * and the values are arranged in row order. That is, the
- * matrix element (i, j) is stored at:
- * <pre>
- * pData[i*numCols + j]
- * </pre>
- *
- * \par Init Functions
- * There is an associated initialization function for each type of matrix
- * data structure.
- * The initialization function sets the values of the internal structure fields.
- * Refer to the function <code>arm_mat_init_f32()</code>, <code>arm_mat_init_q31()</code>
- * and <code>arm_mat_init_q15()</code> for floating-point, Q31 and Q15 types, respectively.
- *
- * \par
- * Use of the initialization function is optional. However, if initialization function is used
- * then the instance structure cannot be placed into a const data section.
- * To place the instance structure in a const data
- * section, manually initialize the data structure. For example:
- * <pre>
- * <code>arm_matrix_instance_f32 S = {nRows, nColumns, pData};</code>
- * <code>arm_matrix_instance_q31 S = {nRows, nColumns, pData};</code>
- * <code>arm_matrix_instance_q15 S = {nRows, nColumns, pData};</code>
- * </pre>
- * where <code>nRows</code> specifies the number of rows, <code>nColumns</code>
- * specifies the number of columns, and <code>pData</code> points to the
- * data array.
- *
- * \par Size Checking
- * By default all of the matrix functions perform size checking on the input and
- * output matrices. For example, the matrix addition function verifies that the
- * two input matrices and the output matrix all have the same number of rows and
- * columns. If the size check fails the functions return:
- * <pre>
- * ARM_MATH_SIZE_MISMATCH
- * </pre>
- * Otherwise the functions return
- * <pre>
- * ARM_MATH_SUCCESS
- * </pre>
- * There is some overhead associated with this matrix size checking.
- * The matrix size checking is enabled via the \#define
- * <pre>
- * ARM_MATH_MATRIX_CHECK
- * </pre>
- * within the library project settings. By default this macro is defined
- * and size checking is enabled. By changing the project settings and
- * undefining this macro size checking is eliminated and the functions
- * run a bit faster. With size checking disabled the functions always
- * return <code>ARM_MATH_SUCCESS</code>.
- */
-
-/**
- * @defgroup groupTransforms Transform Functions
- */
-
-/**
- * @defgroup groupController Controller Functions
- */
-
-/**
- * @defgroup groupStats Statistics Functions
- */
-/**
- * @defgroup groupSupport Support Functions
- */
-
-/**
- * @defgroup groupInterpolation Interpolation Functions
- * These functions perform 1- and 2-dimensional interpolation of data.
- * Linear interpolation is used for 1-dimensional data and
- * bilinear interpolation is used for 2-dimensional data.
- */
-
-/**
- * @defgroup groupExamples Examples
- */
-#ifndef _ARM_MATH_H
-#define _ARM_MATH_H
-
-/* ignore some GCC warnings */
-#if defined ( __GNUC__ )
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wsign-conversion"
-#pragma GCC diagnostic ignored "-Wconversion"
-#pragma GCC diagnostic ignored "-Wunused-parameter"
-#endif
-
-#define __CMSIS_GENERIC /* disable NVIC and Systick functions */
-
-#if defined(ARM_MATH_CM7)
- #include "core_cm7.h"
-#elif defined (ARM_MATH_CM4)
- #include "core_cm4.h"
-#elif defined (ARM_MATH_CM3)
- #include "core_cm3.h"
-#elif defined (ARM_MATH_CM0)
- #include "core_cm0.h"
- #define ARM_MATH_CM0_FAMILY
-#elif defined (ARM_MATH_CM0PLUS)
- #include "core_cm0plus.h"
- #define ARM_MATH_CM0_FAMILY
-#else
- #error "Define according the used Cortex core ARM_MATH_CM7, ARM_MATH_CM4, ARM_MATH_CM3, ARM_MATH_CM0PLUS or ARM_MATH_CM0"
-#endif
-
-#undef __CMSIS_GENERIC /* enable NVIC and Systick functions */
-#include "string.h"
-#include "math.h"
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-
-
- /**
- * @brief Macros required for reciprocal calculation in Normalized LMS
- */
-
-#define DELTA_Q31 (0x100)
-#define DELTA_Q15 0x5
-#define INDEX_MASK 0x0000003F
-#ifndef PI
-#define PI 3.14159265358979f
-#endif
-
- /**
- * @brief Macros required for SINE and COSINE Fast math approximations
- */
-
-#define FAST_MATH_TABLE_SIZE 512
-#define FAST_MATH_Q31_SHIFT (32 - 10)
-#define FAST_MATH_Q15_SHIFT (16 - 10)
-#define CONTROLLER_Q31_SHIFT (32 - 9)
-#define TABLE_SIZE 256
-#define TABLE_SPACING_Q31 0x400000
-#define TABLE_SPACING_Q15 0x80
-
- /**
- * @brief Macros required for SINE and COSINE Controller functions
- */
- /* 1.31(q31) Fixed value of 2/360 */
- /* -1 to +1 is divided into 360 values so total spacing is (2/360) */
-#define INPUT_SPACING 0xB60B61
-
- /**
- * @brief Macro for Unaligned Support
- */
-#ifndef UNALIGNED_SUPPORT_DISABLE
- #define ALIGN4
-#else
- #if defined (__GNUC__)
- #define ALIGN4 __attribute__((aligned(4)))
- #else
- #define ALIGN4 __align(4)
- #endif
-#endif /* #ifndef UNALIGNED_SUPPORT_DISABLE */
-
- /**
- * @brief Error status returned by some functions in the library.
- */
-
- typedef enum
- {
- ARM_MATH_SUCCESS = 0, /**< No error */
- ARM_MATH_ARGUMENT_ERROR = -1, /**< One or more arguments are incorrect */
- ARM_MATH_LENGTH_ERROR = -2, /**< Length of data buffer is incorrect */
- ARM_MATH_SIZE_MISMATCH = -3, /**< Size of matrices is not compatible with the operation. */
- ARM_MATH_NANINF = -4, /**< Not-a-number (NaN) or infinity is generated */
- ARM_MATH_SINGULAR = -5, /**< Generated by matrix inversion if the input matrix is singular and cannot be inverted. */
- ARM_MATH_TEST_FAILURE = -6 /**< Test Failed */
- } arm_status;
-
- /**
- * @brief 8-bit fractional data type in 1.7 format.
- */
- typedef int8_t q7_t;
-
- /**
- * @brief 16-bit fractional data type in 1.15 format.
- */
- typedef int16_t q15_t;
-
- /**
- * @brief 32-bit fractional data type in 1.31 format.
- */
- typedef int32_t q31_t;
-
- /**
- * @brief 64-bit fractional data type in 1.63 format.
- */
- typedef int64_t q63_t;
-
- /**
- * @brief 32-bit floating-point type definition.
- */
- typedef float float32_t;
-
- /**
- * @brief 64-bit floating-point type definition.
- */
- typedef double float64_t;
-
- /**
- * @brief definition to read/write two 16 bit values.
- */
-#if defined __CC_ARM
- #define __SIMD32_TYPE int32_t __packed
- #define CMSIS_UNUSED __attribute__((unused))
-
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #define __SIMD32_TYPE int32_t
- #define CMSIS_UNUSED __attribute__((unused))
-
-#elif defined __GNUC__
- #define __SIMD32_TYPE int32_t
- #define CMSIS_UNUSED __attribute__((unused))
-
-#elif defined __ICCARM__
- #define __SIMD32_TYPE int32_t __packed
- #define CMSIS_UNUSED
-
-#elif defined __CSMC__
- #define __SIMD32_TYPE int32_t
- #define CMSIS_UNUSED
-
-#elif defined __TASKING__
- #define __SIMD32_TYPE __unaligned int32_t
- #define CMSIS_UNUSED
-
-#else
- #error Unknown compiler
-#endif
-
-#define __SIMD32(addr) (*(__SIMD32_TYPE **) & (addr))
-#define __SIMD32_CONST(addr) ((__SIMD32_TYPE *)(addr))
-#define _SIMD32_OFFSET(addr) (*(__SIMD32_TYPE *) (addr))
-#define __SIMD64(addr) (*(int64_t **) & (addr))
-
-#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY)
- /**
- * @brief definition to pack two 16 bit values.
- */
-#define __PKHBT(ARG1, ARG2, ARG3) ( (((int32_t)(ARG1) << 0) & (int32_t)0x0000FFFF) | \
- (((int32_t)(ARG2) << ARG3) & (int32_t)0xFFFF0000) )
-#define __PKHTB(ARG1, ARG2, ARG3) ( (((int32_t)(ARG1) << 0) & (int32_t)0xFFFF0000) | \
- (((int32_t)(ARG2) >> ARG3) & (int32_t)0x0000FFFF) )
-
-#endif
-
-
- /**
- * @brief definition to pack four 8 bit values.
- */
-#ifndef ARM_MATH_BIG_ENDIAN
-
-#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v0) << 0) & (int32_t)0x000000FF) | \
- (((int32_t)(v1) << 8) & (int32_t)0x0000FF00) | \
- (((int32_t)(v2) << 16) & (int32_t)0x00FF0000) | \
- (((int32_t)(v3) << 24) & (int32_t)0xFF000000) )
-#else
-
-#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v3) << 0) & (int32_t)0x000000FF) | \
- (((int32_t)(v2) << 8) & (int32_t)0x0000FF00) | \
- (((int32_t)(v1) << 16) & (int32_t)0x00FF0000) | \
- (((int32_t)(v0) << 24) & (int32_t)0xFF000000) )
-
-#endif
-
-
- /**
- * @brief Clips Q63 to Q31 values.
- */
- static __INLINE q31_t clip_q63_to_q31(
- q63_t x)
- {
- return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ?
- ((0x7FFFFFFF ^ ((q31_t) (x >> 63)))) : (q31_t) x;
- }
-
- /**
- * @brief Clips Q63 to Q15 values.
- */
- static __INLINE q15_t clip_q63_to_q15(
- q63_t x)
- {
- return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ?
- ((0x7FFF ^ ((q15_t) (x >> 63)))) : (q15_t) (x >> 15);
- }
-
- /**
- * @brief Clips Q31 to Q7 values.
- */
- static __INLINE q7_t clip_q31_to_q7(
- q31_t x)
- {
- return ((q31_t) (x >> 24) != ((q31_t) x >> 23)) ?
- ((0x7F ^ ((q7_t) (x >> 31)))) : (q7_t) x;
- }
-
- /**
- * @brief Clips Q31 to Q15 values.
- */
- static __INLINE q15_t clip_q31_to_q15(
- q31_t x)
- {
- return ((q31_t) (x >> 16) != ((q31_t) x >> 15)) ?
- ((0x7FFF ^ ((q15_t) (x >> 31)))) : (q15_t) x;
- }
-
- /**
- * @brief Multiplies 32 X 64 and returns 32 bit result in 2.30 format.
- */
-
- static __INLINE q63_t mult32x64(
- q63_t x,
- q31_t y)
- {
- return ((((q63_t) (x & 0x00000000FFFFFFFF) * y) >> 32) +
- (((q63_t) (x >> 32) * y)));
- }
-
-/*
- #if defined (ARM_MATH_CM0_FAMILY) && defined ( __CC_ARM )
- #define __CLZ __clz
- #endif
- */
-/* note: function can be removed when all toolchain support __CLZ for Cortex-M0 */
-#if defined (ARM_MATH_CM0_FAMILY) && ((defined (__ICCARM__)) )
- static __INLINE uint32_t __CLZ(
- q31_t data);
-
- static __INLINE uint32_t __CLZ(
- q31_t data)
- {
- uint32_t count = 0;
- uint32_t mask = 0x80000000;
-
- while((data & mask) == 0)
- {
- count += 1u;
- mask = mask >> 1u;
- }
-
- return (count);
- }
-#endif
-
- /**
- * @brief Function to Calculates 1/in (reciprocal) value of Q31 Data type.
- */
-
- static __INLINE uint32_t arm_recip_q31(
- q31_t in,
- q31_t * dst,
- q31_t * pRecipTable)
- {
- q31_t out;
- uint32_t tempVal;
- uint32_t index, i;
- uint32_t signBits;
-
- if(in > 0)
- {
- signBits = ((uint32_t) (__CLZ( in) - 1));
- }
- else
- {
- signBits = ((uint32_t) (__CLZ(-in) - 1));
- }
-
- /* Convert input sample to 1.31 format */
- in = (in << signBits);
-
- /* calculation of index for initial approximated Val */
- index = (uint32_t)(in >> 24);
- index = (index & INDEX_MASK);
-
- /* 1.31 with exp 1 */
- out = pRecipTable[index];
-
- /* calculation of reciprocal value */
- /* running approximation for two iterations */
- for (i = 0u; i < 2u; i++)
- {
- tempVal = (uint32_t) (((q63_t) in * out) >> 31);
- tempVal = 0x7FFFFFFFu - tempVal;
- /* 1.31 with exp 1 */
- /* out = (q31_t) (((q63_t) out * tempVal) >> 30); */
- out = clip_q63_to_q31(((q63_t) out * tempVal) >> 30);
- }
-
- /* write output */
- *dst = out;
-
- /* return num of signbits of out = 1/in value */
- return (signBits + 1u);
- }
-
-
- /**
- * @brief Function to Calculates 1/in (reciprocal) value of Q15 Data type.
- */
- static __INLINE uint32_t arm_recip_q15(
- q15_t in,
- q15_t * dst,
- q15_t * pRecipTable)
- {
- q15_t out = 0;
- uint32_t tempVal = 0;
- uint32_t index = 0, i = 0;
- uint32_t signBits = 0;
-
- if(in > 0)
- {
- signBits = ((uint32_t)(__CLZ( in) - 17));
- }
- else
- {
- signBits = ((uint32_t)(__CLZ(-in) - 17));
- }
-
- /* Convert input sample to 1.15 format */
- in = (in << signBits);
-
- /* calculation of index for initial approximated Val */
- index = (uint32_t)(in >> 8);
- index = (index & INDEX_MASK);
-
- /* 1.15 with exp 1 */
- out = pRecipTable[index];
-
- /* calculation of reciprocal value */
- /* running approximation for two iterations */
- for (i = 0u; i < 2u; i++)
- {
- tempVal = (uint32_t) (((q31_t) in * out) >> 15);
- tempVal = 0x7FFFu - tempVal;
- /* 1.15 with exp 1 */
- out = (q15_t) (((q31_t) out * tempVal) >> 14);
- /* out = clip_q31_to_q15(((q31_t) out * tempVal) >> 14); */
- }
-
- /* write output */
- *dst = out;
-
- /* return num of signbits of out = 1/in value */
- return (signBits + 1);
- }
-
-
- /*
- * @brief C custom defined intrinisic function for only M0 processors
- */
-#if defined(ARM_MATH_CM0_FAMILY)
- static __INLINE q31_t __SSAT(
- q31_t x,
- uint32_t y)
- {
- int32_t posMax, negMin;
- uint32_t i;
-
- posMax = 1;
- for (i = 0; i < (y - 1); i++)
- {
- posMax = posMax * 2;
- }
-
- if(x > 0)
- {
- posMax = (posMax - 1);
-
- if(x > posMax)
- {
- x = posMax;
- }
- }
- else
- {
- negMin = -posMax;
-
- if(x < negMin)
- {
- x = negMin;
- }
- }
- return (x);
- }
-#endif /* end of ARM_MATH_CM0_FAMILY */
-
-
- /*
- * @brief C custom defined intrinsic function for M3 and M0 processors
- */
-#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY)
-
- /*
- * @brief C custom defined QADD8 for M3 and M0 processors
- */
- static __INLINE uint32_t __QADD8(
- uint32_t x,
- uint32_t y)
- {
- q31_t r, s, t, u;
-
- r = __SSAT(((((q31_t)x << 24) >> 24) + (((q31_t)y << 24) >> 24)), 8) & (int32_t)0x000000FF;
- s = __SSAT(((((q31_t)x << 16) >> 24) + (((q31_t)y << 16) >> 24)), 8) & (int32_t)0x000000FF;
- t = __SSAT(((((q31_t)x << 8) >> 24) + (((q31_t)y << 8) >> 24)), 8) & (int32_t)0x000000FF;
- u = __SSAT(((((q31_t)x ) >> 24) + (((q31_t)y ) >> 24)), 8) & (int32_t)0x000000FF;
-
- return ((uint32_t)((u << 24) | (t << 16) | (s << 8) | (r )));
- }
-
-
- /*
- * @brief C custom defined QSUB8 for M3 and M0 processors
- */
- static __INLINE uint32_t __QSUB8(
- uint32_t x,
- uint32_t y)
- {
- q31_t r, s, t, u;
-
- r = __SSAT(((((q31_t)x << 24) >> 24) - (((q31_t)y << 24) >> 24)), 8) & (int32_t)0x000000FF;
- s = __SSAT(((((q31_t)x << 16) >> 24) - (((q31_t)y << 16) >> 24)), 8) & (int32_t)0x000000FF;
- t = __SSAT(((((q31_t)x << 8) >> 24) - (((q31_t)y << 8) >> 24)), 8) & (int32_t)0x000000FF;
- u = __SSAT(((((q31_t)x ) >> 24) - (((q31_t)y ) >> 24)), 8) & (int32_t)0x000000FF;
-
- return ((uint32_t)((u << 24) | (t << 16) | (s << 8) | (r )));
- }
-
-
- /*
- * @brief C custom defined QADD16 for M3 and M0 processors
- */
- static __INLINE uint32_t __QADD16(
- uint32_t x,
- uint32_t y)
- {
-/* q31_t r, s; without initialisation 'arm_offset_q15 test' fails but 'intrinsic' tests pass! for armCC */
- q31_t r = 0, s = 0;
-
- r = __SSAT(((((q31_t)x << 16) >> 16) + (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF;
- s = __SSAT(((((q31_t)x ) >> 16) + (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF;
-
- return ((uint32_t)((s << 16) | (r )));
- }
-
-
- /*
- * @brief C custom defined SHADD16 for M3 and M0 processors
- */
- static __INLINE uint32_t __SHADD16(
- uint32_t x,
- uint32_t y)
- {
- q31_t r, s;
-
- r = (((((q31_t)x << 16) >> 16) + (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF;
- s = (((((q31_t)x ) >> 16) + (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF;
-
- return ((uint32_t)((s << 16) | (r )));
- }
-
-
- /*
- * @brief C custom defined QSUB16 for M3 and M0 processors
- */
- static __INLINE uint32_t __QSUB16(
- uint32_t x,
- uint32_t y)
- {
- q31_t r, s;
-
- r = __SSAT(((((q31_t)x << 16) >> 16) - (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF;
- s = __SSAT(((((q31_t)x ) >> 16) - (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF;
-
- return ((uint32_t)((s << 16) | (r )));
- }
-
-
- /*
- * @brief C custom defined SHSUB16 for M3 and M0 processors
- */
- static __INLINE uint32_t __SHSUB16(
- uint32_t x,
- uint32_t y)
- {
- q31_t r, s;
-
- r = (((((q31_t)x << 16) >> 16) - (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF;
- s = (((((q31_t)x ) >> 16) - (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF;
-
- return ((uint32_t)((s << 16) | (r )));
- }
-
-
- /*
- * @brief C custom defined QASX for M3 and M0 processors
- */
- static __INLINE uint32_t __QASX(
- uint32_t x,
- uint32_t y)
- {
- q31_t r, s;
-
- r = __SSAT(((((q31_t)x << 16) >> 16) - (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF;
- s = __SSAT(((((q31_t)x ) >> 16) + (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF;
-
- return ((uint32_t)((s << 16) | (r )));
- }
-
-
- /*
- * @brief C custom defined SHASX for M3 and M0 processors
- */
- static __INLINE uint32_t __SHASX(
- uint32_t x,
- uint32_t y)
- {
- q31_t r, s;
-
- r = (((((q31_t)x << 16) >> 16) - (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF;
- s = (((((q31_t)x ) >> 16) + (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF;
-
- return ((uint32_t)((s << 16) | (r )));
- }
-
-
- /*
- * @brief C custom defined QSAX for M3 and M0 processors
- */
- static __INLINE uint32_t __QSAX(
- uint32_t x,
- uint32_t y)
- {
- q31_t r, s;
-
- r = __SSAT(((((q31_t)x << 16) >> 16) + (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF;
- s = __SSAT(((((q31_t)x ) >> 16) - (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF;
-
- return ((uint32_t)((s << 16) | (r )));
- }
-
-
- /*
- * @brief C custom defined SHSAX for M3 and M0 processors
- */
- static __INLINE uint32_t __SHSAX(
- uint32_t x,
- uint32_t y)
- {
- q31_t r, s;
-
- r = (((((q31_t)x << 16) >> 16) + (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF;
- s = (((((q31_t)x ) >> 16) - (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF;
-
- return ((uint32_t)((s << 16) | (r )));
- }
-
-
- /*
- * @brief C custom defined SMUSDX for M3 and M0 processors
- */
- static __INLINE uint32_t __SMUSDX(
- uint32_t x,
- uint32_t y)
- {
- return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) -
- ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) ));
- }
-
- /*
- * @brief C custom defined SMUADX for M3 and M0 processors
- */
- static __INLINE uint32_t __SMUADX(
- uint32_t x,
- uint32_t y)
- {
- return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) +
- ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) ));
- }
-
-
- /*
- * @brief C custom defined QADD for M3 and M0 processors
- */
- static __INLINE int32_t __QADD(
- int32_t x,
- int32_t y)
- {
- return ((int32_t)(clip_q63_to_q31((q63_t)x + (q31_t)y)));
- }
-
-
- /*
- * @brief C custom defined QSUB for M3 and M0 processors
- */
- static __INLINE int32_t __QSUB(
- int32_t x,
- int32_t y)
- {
- return ((int32_t)(clip_q63_to_q31((q63_t)x - (q31_t)y)));
- }
-
-
- /*
- * @brief C custom defined SMLAD for M3 and M0 processors
- */
- static __INLINE uint32_t __SMLAD(
- uint32_t x,
- uint32_t y,
- uint32_t sum)
- {
- return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) +
- ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) +
- ( ((q31_t)sum ) ) ));
- }
-
-
- /*
- * @brief C custom defined SMLADX for M3 and M0 processors
- */
- static __INLINE uint32_t __SMLADX(
- uint32_t x,
- uint32_t y,
- uint32_t sum)
- {
- return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) +
- ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) +
- ( ((q31_t)sum ) ) ));
- }
-
-
- /*
- * @brief C custom defined SMLSDX for M3 and M0 processors
- */
- static __INLINE uint32_t __SMLSDX(
- uint32_t x,
- uint32_t y,
- uint32_t sum)
- {
- return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) -
- ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) +
- ( ((q31_t)sum ) ) ));
- }
-
-
- /*
- * @brief C custom defined SMLALD for M3 and M0 processors
- */
- static __INLINE uint64_t __SMLALD(
- uint32_t x,
- uint32_t y,
- uint64_t sum)
- {
-/* return (sum + ((q15_t) (x >> 16) * (q15_t) (y >> 16)) + ((q15_t) x * (q15_t) y)); */
- return ((uint64_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) +
- ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) +
- ( ((q63_t)sum ) ) ));
- }
-
-
- /*
- * @brief C custom defined SMLALDX for M3 and M0 processors
- */
- static __INLINE uint64_t __SMLALDX(
- uint32_t x,
- uint32_t y,
- uint64_t sum)
- {
-/* return (sum + ((q15_t) (x >> 16) * (q15_t) y)) + ((q15_t) x * (q15_t) (y >> 16)); */
- return ((uint64_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) +
- ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) +
- ( ((q63_t)sum ) ) ));
- }
-
-
- /*
- * @brief C custom defined SMUAD for M3 and M0 processors
- */
- static __INLINE uint32_t __SMUAD(
- uint32_t x,
- uint32_t y)
- {
- return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) +
- ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) ));
- }
-
-
- /*
- * @brief C custom defined SMUSD for M3 and M0 processors
- */
- static __INLINE uint32_t __SMUSD(
- uint32_t x,
- uint32_t y)
- {
- return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) -
- ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) ));
- }
-
-
- /*
- * @brief C custom defined SXTB16 for M3 and M0 processors
- */
- static __INLINE uint32_t __SXTB16(
- uint32_t x)
- {
- return ((uint32_t)(((((q31_t)x << 24) >> 24) & (q31_t)0x0000FFFF) |
- ((((q31_t)x << 8) >> 8) & (q31_t)0xFFFF0000) ));
- }
-
-#endif /* defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY) */
-
-
- /**
- * @brief Instance structure for the Q7 FIR filter.
- */
- typedef struct
- {
- uint16_t numTaps; /**< number of filter coefficients in the filter. */
- q7_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
- q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
- } arm_fir_instance_q7;
-
- /**
- * @brief Instance structure for the Q15 FIR filter.
- */
- typedef struct
- {
- uint16_t numTaps; /**< number of filter coefficients in the filter. */
- q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
- q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
- } arm_fir_instance_q15;
-
- /**
- * @brief Instance structure for the Q31 FIR filter.
- */
- typedef struct
- {
- uint16_t numTaps; /**< number of filter coefficients in the filter. */
- q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
- q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
- } arm_fir_instance_q31;
-
- /**
- * @brief Instance structure for the floating-point FIR filter.
- */
- typedef struct
- {
- uint16_t numTaps; /**< number of filter coefficients in the filter. */
- float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
- float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
- } arm_fir_instance_f32;
-
-
- /**
- * @brief Processing function for the Q7 FIR filter.
- * @param[in] S points to an instance of the Q7 FIR filter structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- */
- void arm_fir_q7(
- const arm_fir_instance_q7 * S,
- q7_t * pSrc,
- q7_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the Q7 FIR filter.
- * @param[in,out] S points to an instance of the Q7 FIR structure.
- * @param[in] numTaps Number of filter coefficients in the filter.
- * @param[in] pCoeffs points to the filter coefficients.
- * @param[in] pState points to the state buffer.
- * @param[in] blockSize number of samples that are processed.
- */
- void arm_fir_init_q7(
- arm_fir_instance_q7 * S,
- uint16_t numTaps,
- q7_t * pCoeffs,
- q7_t * pState,
- uint32_t blockSize);
-
-
- /**
- * @brief Processing function for the Q15 FIR filter.
- * @param[in] S points to an instance of the Q15 FIR structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- */
- void arm_fir_q15(
- const arm_fir_instance_q15 * S,
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Processing function for the fast Q15 FIR filter for Cortex-M3 and Cortex-M4.
- * @param[in] S points to an instance of the Q15 FIR filter structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- */
- void arm_fir_fast_q15(
- const arm_fir_instance_q15 * S,
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the Q15 FIR filter.
- * @param[in,out] S points to an instance of the Q15 FIR filter structure.
- * @param[in] numTaps Number of filter coefficients in the filter. Must be even and greater than or equal to 4.
- * @param[in] pCoeffs points to the filter coefficients.
- * @param[in] pState points to the state buffer.
- * @param[in] blockSize number of samples that are processed at a time.
- * @return The function returns ARM_MATH_SUCCESS if initialization was successful or ARM_MATH_ARGUMENT_ERROR if
- * <code>numTaps</code> is not a supported value.
- */
- arm_status arm_fir_init_q15(
- arm_fir_instance_q15 * S,
- uint16_t numTaps,
- q15_t * pCoeffs,
- q15_t * pState,
- uint32_t blockSize);
-
-
- /**
- * @brief Processing function for the Q31 FIR filter.
- * @param[in] S points to an instance of the Q31 FIR filter structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- */
- void arm_fir_q31(
- const arm_fir_instance_q31 * S,
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Processing function for the fast Q31 FIR filter for Cortex-M3 and Cortex-M4.
- * @param[in] S points to an instance of the Q31 FIR structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- */
- void arm_fir_fast_q31(
- const arm_fir_instance_q31 * S,
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the Q31 FIR filter.
- * @param[in,out] S points to an instance of the Q31 FIR structure.
- * @param[in] numTaps Number of filter coefficients in the filter.
- * @param[in] pCoeffs points to the filter coefficients.
- * @param[in] pState points to the state buffer.
- * @param[in] blockSize number of samples that are processed at a time.
- */
- void arm_fir_init_q31(
- arm_fir_instance_q31 * S,
- uint16_t numTaps,
- q31_t * pCoeffs,
- q31_t * pState,
- uint32_t blockSize);
-
-
- /**
- * @brief Processing function for the floating-point FIR filter.
- * @param[in] S points to an instance of the floating-point FIR structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- */
- void arm_fir_f32(
- const arm_fir_instance_f32 * S,
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the floating-point FIR filter.
- * @param[in,out] S points to an instance of the floating-point FIR filter structure.
- * @param[in] numTaps Number of filter coefficients in the filter.
- * @param[in] pCoeffs points to the filter coefficients.
- * @param[in] pState points to the state buffer.
- * @param[in] blockSize number of samples that are processed at a time.
- */
- void arm_fir_init_f32(
- arm_fir_instance_f32 * S,
- uint16_t numTaps,
- float32_t * pCoeffs,
- float32_t * pState,
- uint32_t blockSize);
-
-
- /**
- * @brief Instance structure for the Q15 Biquad cascade filter.
- */
- typedef struct
- {
- int8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
- q15_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
- q15_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
- int8_t postShift; /**< Additional shift, in bits, applied to each output sample. */
- } arm_biquad_casd_df1_inst_q15;
-
- /**
- * @brief Instance structure for the Q31 Biquad cascade filter.
- */
- typedef struct
- {
- uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
- q31_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
- q31_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
- uint8_t postShift; /**< Additional shift, in bits, applied to each output sample. */
- } arm_biquad_casd_df1_inst_q31;
-
- /**
- * @brief Instance structure for the floating-point Biquad cascade filter.
- */
- typedef struct
- {
- uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
- float32_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */
- float32_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */
- } arm_biquad_casd_df1_inst_f32;
-
-
- /**
- * @brief Processing function for the Q15 Biquad cascade filter.
- * @param[in] S points to an instance of the Q15 Biquad cascade structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- */
- void arm_biquad_cascade_df1_q15(
- const arm_biquad_casd_df1_inst_q15 * S,
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the Q15 Biquad cascade filter.
- * @param[in,out] S points to an instance of the Q15 Biquad cascade structure.
- * @param[in] numStages number of 2nd order stages in the filter.
- * @param[in] pCoeffs points to the filter coefficients.
- * @param[in] pState points to the state buffer.
- * @param[in] postShift Shift to be applied to the output. Varies according to the coefficients format
- */
- void arm_biquad_cascade_df1_init_q15(
- arm_biquad_casd_df1_inst_q15 * S,
- uint8_t numStages,
- q15_t * pCoeffs,
- q15_t * pState,
- int8_t postShift);
-
-
- /**
- * @brief Fast but less precise processing function for the Q15 Biquad cascade filter for Cortex-M3 and Cortex-M4.
- * @param[in] S points to an instance of the Q15 Biquad cascade structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- */
- void arm_biquad_cascade_df1_fast_q15(
- const arm_biquad_casd_df1_inst_q15 * S,
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Processing function for the Q31 Biquad cascade filter
- * @param[in] S points to an instance of the Q31 Biquad cascade structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- */
- void arm_biquad_cascade_df1_q31(
- const arm_biquad_casd_df1_inst_q31 * S,
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Fast but less precise processing function for the Q31 Biquad cascade filter for Cortex-M3 and Cortex-M4.
- * @param[in] S points to an instance of the Q31 Biquad cascade structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- */
- void arm_biquad_cascade_df1_fast_q31(
- const arm_biquad_casd_df1_inst_q31 * S,
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the Q31 Biquad cascade filter.
- * @param[in,out] S points to an instance of the Q31 Biquad cascade structure.
- * @param[in] numStages number of 2nd order stages in the filter.
- * @param[in] pCoeffs points to the filter coefficients.
- * @param[in] pState points to the state buffer.
- * @param[in] postShift Shift to be applied to the output. Varies according to the coefficients format
- */
- void arm_biquad_cascade_df1_init_q31(
- arm_biquad_casd_df1_inst_q31 * S,
- uint8_t numStages,
- q31_t * pCoeffs,
- q31_t * pState,
- int8_t postShift);
-
-
- /**
- * @brief Processing function for the floating-point Biquad cascade filter.
- * @param[in] S points to an instance of the floating-point Biquad cascade structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- */
- void arm_biquad_cascade_df1_f32(
- const arm_biquad_casd_df1_inst_f32 * S,
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the floating-point Biquad cascade filter.
- * @param[in,out] S points to an instance of the floating-point Biquad cascade structure.
- * @param[in] numStages number of 2nd order stages in the filter.
- * @param[in] pCoeffs points to the filter coefficients.
- * @param[in] pState points to the state buffer.
- */
- void arm_biquad_cascade_df1_init_f32(
- arm_biquad_casd_df1_inst_f32 * S,
- uint8_t numStages,
- float32_t * pCoeffs,
- float32_t * pState);
-
-
- /**
- * @brief Instance structure for the floating-point matrix structure.
- */
- typedef struct
- {
- uint16_t numRows; /**< number of rows of the matrix. */
- uint16_t numCols; /**< number of columns of the matrix. */
- float32_t *pData; /**< points to the data of the matrix. */
- } arm_matrix_instance_f32;
-
-
- /**
- * @brief Instance structure for the floating-point matrix structure.
- */
- typedef struct
- {
- uint16_t numRows; /**< number of rows of the matrix. */
- uint16_t numCols; /**< number of columns of the matrix. */
- float64_t *pData; /**< points to the data of the matrix. */
- } arm_matrix_instance_f64;
-
- /**
- * @brief Instance structure for the Q15 matrix structure.
- */
- typedef struct
- {
- uint16_t numRows; /**< number of rows of the matrix. */
- uint16_t numCols; /**< number of columns of the matrix. */
- q15_t *pData; /**< points to the data of the matrix. */
- } arm_matrix_instance_q15;
-
- /**
- * @brief Instance structure for the Q31 matrix structure.
- */
- typedef struct
- {
- uint16_t numRows; /**< number of rows of the matrix. */
- uint16_t numCols; /**< number of columns of the matrix. */
- q31_t *pData; /**< points to the data of the matrix. */
- } arm_matrix_instance_q31;
-
-
- /**
- * @brief Floating-point matrix addition.
- * @param[in] pSrcA points to the first input matrix structure
- * @param[in] pSrcB points to the second input matrix structure
- * @param[out] pDst points to output matrix structure
- * @return The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
- arm_status arm_mat_add_f32(
- const arm_matrix_instance_f32 * pSrcA,
- const arm_matrix_instance_f32 * pSrcB,
- arm_matrix_instance_f32 * pDst);
-
-
- /**
- * @brief Q15 matrix addition.
- * @param[in] pSrcA points to the first input matrix structure
- * @param[in] pSrcB points to the second input matrix structure
- * @param[out] pDst points to output matrix structure
- * @return The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
- arm_status arm_mat_add_q15(
- const arm_matrix_instance_q15 * pSrcA,
- const arm_matrix_instance_q15 * pSrcB,
- arm_matrix_instance_q15 * pDst);
-
-
- /**
- * @brief Q31 matrix addition.
- * @param[in] pSrcA points to the first input matrix structure
- * @param[in] pSrcB points to the second input matrix structure
- * @param[out] pDst points to output matrix structure
- * @return The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
- arm_status arm_mat_add_q31(
- const arm_matrix_instance_q31 * pSrcA,
- const arm_matrix_instance_q31 * pSrcB,
- arm_matrix_instance_q31 * pDst);
-
-
- /**
- * @brief Floating-point, complex, matrix multiplication.
- * @param[in] pSrcA points to the first input matrix structure
- * @param[in] pSrcB points to the second input matrix structure
- * @param[out] pDst points to output matrix structure
- * @return The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
- arm_status arm_mat_cmplx_mult_f32(
- const arm_matrix_instance_f32 * pSrcA,
- const arm_matrix_instance_f32 * pSrcB,
- arm_matrix_instance_f32 * pDst);
-
-
- /**
- * @brief Q15, complex, matrix multiplication.
- * @param[in] pSrcA points to the first input matrix structure
- * @param[in] pSrcB points to the second input matrix structure
- * @param[out] pDst points to output matrix structure
- * @return The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
- arm_status arm_mat_cmplx_mult_q15(
- const arm_matrix_instance_q15 * pSrcA,
- const arm_matrix_instance_q15 * pSrcB,
- arm_matrix_instance_q15 * pDst,
- q15_t * pScratch);
-
-
- /**
- * @brief Q31, complex, matrix multiplication.
- * @param[in] pSrcA points to the first input matrix structure
- * @param[in] pSrcB points to the second input matrix structure
- * @param[out] pDst points to output matrix structure
- * @return The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
- arm_status arm_mat_cmplx_mult_q31(
- const arm_matrix_instance_q31 * pSrcA,
- const arm_matrix_instance_q31 * pSrcB,
- arm_matrix_instance_q31 * pDst);
-
-
- /**
- * @brief Floating-point matrix transpose.
- * @param[in] pSrc points to the input matrix
- * @param[out] pDst points to the output matrix
- * @return The function returns either <code>ARM_MATH_SIZE_MISMATCH</code>
- * or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
- arm_status arm_mat_trans_f32(
- const arm_matrix_instance_f32 * pSrc,
- arm_matrix_instance_f32 * pDst);
-
-
- /**
- * @brief Q15 matrix transpose.
- * @param[in] pSrc points to the input matrix
- * @param[out] pDst points to the output matrix
- * @return The function returns either <code>ARM_MATH_SIZE_MISMATCH</code>
- * or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
- arm_status arm_mat_trans_q15(
- const arm_matrix_instance_q15 * pSrc,
- arm_matrix_instance_q15 * pDst);
-
-
- /**
- * @brief Q31 matrix transpose.
- * @param[in] pSrc points to the input matrix
- * @param[out] pDst points to the output matrix
- * @return The function returns either <code>ARM_MATH_SIZE_MISMATCH</code>
- * or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
- arm_status arm_mat_trans_q31(
- const arm_matrix_instance_q31 * pSrc,
- arm_matrix_instance_q31 * pDst);
-
-
- /**
- * @brief Floating-point matrix multiplication
- * @param[in] pSrcA points to the first input matrix structure
- * @param[in] pSrcB points to the second input matrix structure
- * @param[out] pDst points to output matrix structure
- * @return The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
- arm_status arm_mat_mult_f32(
- const arm_matrix_instance_f32 * pSrcA,
- const arm_matrix_instance_f32 * pSrcB,
- arm_matrix_instance_f32 * pDst);
-
-
- /**
- * @brief Q15 matrix multiplication
- * @param[in] pSrcA points to the first input matrix structure
- * @param[in] pSrcB points to the second input matrix structure
- * @param[out] pDst points to output matrix structure
- * @param[in] pState points to the array for storing intermediate results
- * @return The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
- arm_status arm_mat_mult_q15(
- const arm_matrix_instance_q15 * pSrcA,
- const arm_matrix_instance_q15 * pSrcB,
- arm_matrix_instance_q15 * pDst,
- q15_t * pState);
-
-
- /**
- * @brief Q15 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4
- * @param[in] pSrcA points to the first input matrix structure
- * @param[in] pSrcB points to the second input matrix structure
- * @param[out] pDst points to output matrix structure
- * @param[in] pState points to the array for storing intermediate results
- * @return The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
- arm_status arm_mat_mult_fast_q15(
- const arm_matrix_instance_q15 * pSrcA,
- const arm_matrix_instance_q15 * pSrcB,
- arm_matrix_instance_q15 * pDst,
- q15_t * pState);
-
-
- /**
- * @brief Q31 matrix multiplication
- * @param[in] pSrcA points to the first input matrix structure
- * @param[in] pSrcB points to the second input matrix structure
- * @param[out] pDst points to output matrix structure
- * @return The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
- arm_status arm_mat_mult_q31(
- const arm_matrix_instance_q31 * pSrcA,
- const arm_matrix_instance_q31 * pSrcB,
- arm_matrix_instance_q31 * pDst);
-
-
- /**
- * @brief Q31 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4
- * @param[in] pSrcA points to the first input matrix structure
- * @param[in] pSrcB points to the second input matrix structure
- * @param[out] pDst points to output matrix structure
- * @return The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
- arm_status arm_mat_mult_fast_q31(
- const arm_matrix_instance_q31 * pSrcA,
- const arm_matrix_instance_q31 * pSrcB,
- arm_matrix_instance_q31 * pDst);
-
-
- /**
- * @brief Floating-point matrix subtraction
- * @param[in] pSrcA points to the first input matrix structure
- * @param[in] pSrcB points to the second input matrix structure
- * @param[out] pDst points to output matrix structure
- * @return The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
- arm_status arm_mat_sub_f32(
- const arm_matrix_instance_f32 * pSrcA,
- const arm_matrix_instance_f32 * pSrcB,
- arm_matrix_instance_f32 * pDst);
-
-
- /**
- * @brief Q15 matrix subtraction
- * @param[in] pSrcA points to the first input matrix structure
- * @param[in] pSrcB points to the second input matrix structure
- * @param[out] pDst points to output matrix structure
- * @return The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
- arm_status arm_mat_sub_q15(
- const arm_matrix_instance_q15 * pSrcA,
- const arm_matrix_instance_q15 * pSrcB,
- arm_matrix_instance_q15 * pDst);
-
-
- /**
- * @brief Q31 matrix subtraction
- * @param[in] pSrcA points to the first input matrix structure
- * @param[in] pSrcB points to the second input matrix structure
- * @param[out] pDst points to output matrix structure
- * @return The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
- arm_status arm_mat_sub_q31(
- const arm_matrix_instance_q31 * pSrcA,
- const arm_matrix_instance_q31 * pSrcB,
- arm_matrix_instance_q31 * pDst);
-
-
- /**
- * @brief Floating-point matrix scaling.
- * @param[in] pSrc points to the input matrix
- * @param[in] scale scale factor
- * @param[out] pDst points to the output matrix
- * @return The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
- arm_status arm_mat_scale_f32(
- const arm_matrix_instance_f32 * pSrc,
- float32_t scale,
- arm_matrix_instance_f32 * pDst);
-
-
- /**
- * @brief Q15 matrix scaling.
- * @param[in] pSrc points to input matrix
- * @param[in] scaleFract fractional portion of the scale factor
- * @param[in] shift number of bits to shift the result by
- * @param[out] pDst points to output matrix
- * @return The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
- arm_status arm_mat_scale_q15(
- const arm_matrix_instance_q15 * pSrc,
- q15_t scaleFract,
- int32_t shift,
- arm_matrix_instance_q15 * pDst);
-
-
- /**
- * @brief Q31 matrix scaling.
- * @param[in] pSrc points to input matrix
- * @param[in] scaleFract fractional portion of the scale factor
- * @param[in] shift number of bits to shift the result by
- * @param[out] pDst points to output matrix structure
- * @return The function returns either
- * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
- */
- arm_status arm_mat_scale_q31(
- const arm_matrix_instance_q31 * pSrc,
- q31_t scaleFract,
- int32_t shift,
- arm_matrix_instance_q31 * pDst);
-
-
- /**
- * @brief Q31 matrix initialization.
- * @param[in,out] S points to an instance of the floating-point matrix structure.
- * @param[in] nRows number of rows in the matrix.
- * @param[in] nColumns number of columns in the matrix.
- * @param[in] pData points to the matrix data array.
- */
- void arm_mat_init_q31(
- arm_matrix_instance_q31 * S,
- uint16_t nRows,
- uint16_t nColumns,
- q31_t * pData);
-
-
- /**
- * @brief Q15 matrix initialization.
- * @param[in,out] S points to an instance of the floating-point matrix structure.
- * @param[in] nRows number of rows in the matrix.
- * @param[in] nColumns number of columns in the matrix.
- * @param[in] pData points to the matrix data array.
- */
- void arm_mat_init_q15(
- arm_matrix_instance_q15 * S,
- uint16_t nRows,
- uint16_t nColumns,
- q15_t * pData);
-
-
- /**
- * @brief Floating-point matrix initialization.
- * @param[in,out] S points to an instance of the floating-point matrix structure.
- * @param[in] nRows number of rows in the matrix.
- * @param[in] nColumns number of columns in the matrix.
- * @param[in] pData points to the matrix data array.
- */
- void arm_mat_init_f32(
- arm_matrix_instance_f32 * S,
- uint16_t nRows,
- uint16_t nColumns,
- float32_t * pData);
-
-
-
- /**
- * @brief Instance structure for the Q15 PID Control.
- */
- typedef struct
- {
- q15_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
-#ifdef ARM_MATH_CM0_FAMILY
- q15_t A1;
- q15_t A2;
-#else
- q31_t A1; /**< The derived gain A1 = -Kp - 2Kd | Kd.*/
-#endif
- q15_t state[3]; /**< The state array of length 3. */
- q15_t Kp; /**< The proportional gain. */
- q15_t Ki; /**< The integral gain. */
- q15_t Kd; /**< The derivative gain. */
- } arm_pid_instance_q15;
-
- /**
- * @brief Instance structure for the Q31 PID Control.
- */
- typedef struct
- {
- q31_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
- q31_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */
- q31_t A2; /**< The derived gain, A2 = Kd . */
- q31_t state[3]; /**< The state array of length 3. */
- q31_t Kp; /**< The proportional gain. */
- q31_t Ki; /**< The integral gain. */
- q31_t Kd; /**< The derivative gain. */
- } arm_pid_instance_q31;
-
- /**
- * @brief Instance structure for the floating-point PID Control.
- */
- typedef struct
- {
- float32_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */
- float32_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */
- float32_t A2; /**< The derived gain, A2 = Kd . */
- float32_t state[3]; /**< The state array of length 3. */
- float32_t Kp; /**< The proportional gain. */
- float32_t Ki; /**< The integral gain. */
- float32_t Kd; /**< The derivative gain. */
- } arm_pid_instance_f32;
-
-
-
- /**
- * @brief Initialization function for the floating-point PID Control.
- * @param[in,out] S points to an instance of the PID structure.
- * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
- */
- void arm_pid_init_f32(
- arm_pid_instance_f32 * S,
- int32_t resetStateFlag);
-
-
- /**
- * @brief Reset function for the floating-point PID Control.
- * @param[in,out] S is an instance of the floating-point PID Control structure
- */
- void arm_pid_reset_f32(
- arm_pid_instance_f32 * S);
-
-
- /**
- * @brief Initialization function for the Q31 PID Control.
- * @param[in,out] S points to an instance of the Q15 PID structure.
- * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
- */
- void arm_pid_init_q31(
- arm_pid_instance_q31 * S,
- int32_t resetStateFlag);
-
-
- /**
- * @brief Reset function for the Q31 PID Control.
- * @param[in,out] S points to an instance of the Q31 PID Control structure
- */
-
- void arm_pid_reset_q31(
- arm_pid_instance_q31 * S);
-
-
- /**
- * @brief Initialization function for the Q15 PID Control.
- * @param[in,out] S points to an instance of the Q15 PID structure.
- * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state.
- */
- void arm_pid_init_q15(
- arm_pid_instance_q15 * S,
- int32_t resetStateFlag);
-
-
- /**
- * @brief Reset function for the Q15 PID Control.
- * @param[in,out] S points to an instance of the q15 PID Control structure
- */
- void arm_pid_reset_q15(
- arm_pid_instance_q15 * S);
-
-
- /**
- * @brief Instance structure for the floating-point Linear Interpolate function.
- */
- typedef struct
- {
- uint32_t nValues; /**< nValues */
- float32_t x1; /**< x1 */
- float32_t xSpacing; /**< xSpacing */
- float32_t *pYData; /**< pointer to the table of Y values */
- } arm_linear_interp_instance_f32;
-
- /**
- * @brief Instance structure for the floating-point bilinear interpolation function.
- */
- typedef struct
- {
- uint16_t numRows; /**< number of rows in the data table. */
- uint16_t numCols; /**< number of columns in the data table. */
- float32_t *pData; /**< points to the data table. */
- } arm_bilinear_interp_instance_f32;
-
- /**
- * @brief Instance structure for the Q31 bilinear interpolation function.
- */
- typedef struct
- {
- uint16_t numRows; /**< number of rows in the data table. */
- uint16_t numCols; /**< number of columns in the data table. */
- q31_t *pData; /**< points to the data table. */
- } arm_bilinear_interp_instance_q31;
-
- /**
- * @brief Instance structure for the Q15 bilinear interpolation function.
- */
- typedef struct
- {
- uint16_t numRows; /**< number of rows in the data table. */
- uint16_t numCols; /**< number of columns in the data table. */
- q15_t *pData; /**< points to the data table. */
- } arm_bilinear_interp_instance_q15;
-
- /**
- * @brief Instance structure for the Q15 bilinear interpolation function.
- */
- typedef struct
- {
- uint16_t numRows; /**< number of rows in the data table. */
- uint16_t numCols; /**< number of columns in the data table. */
- q7_t *pData; /**< points to the data table. */
- } arm_bilinear_interp_instance_q7;
-
-
- /**
- * @brief Q7 vector multiplication.
- * @param[in] pSrcA points to the first input vector
- * @param[in] pSrcB points to the second input vector
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in each vector
- */
- void arm_mult_q7(
- q7_t * pSrcA,
- q7_t * pSrcB,
- q7_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Q15 vector multiplication.
- * @param[in] pSrcA points to the first input vector
- * @param[in] pSrcB points to the second input vector
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in each vector
- */
- void arm_mult_q15(
- q15_t * pSrcA,
- q15_t * pSrcB,
- q15_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Q31 vector multiplication.
- * @param[in] pSrcA points to the first input vector
- * @param[in] pSrcB points to the second input vector
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in each vector
- */
- void arm_mult_q31(
- q31_t * pSrcA,
- q31_t * pSrcB,
- q31_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Floating-point vector multiplication.
- * @param[in] pSrcA points to the first input vector
- * @param[in] pSrcB points to the second input vector
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in each vector
- */
- void arm_mult_f32(
- float32_t * pSrcA,
- float32_t * pSrcB,
- float32_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Instance structure for the Q15 CFFT/CIFFT function.
- */
- typedef struct
- {
- uint16_t fftLen; /**< length of the FFT. */
- uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
- uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
- q15_t *pTwiddle; /**< points to the Sin twiddle factor table. */
- uint16_t *pBitRevTable; /**< points to the bit reversal table. */
- uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
- uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
- } arm_cfft_radix2_instance_q15;
-
-/* Deprecated */
- arm_status arm_cfft_radix2_init_q15(
- arm_cfft_radix2_instance_q15 * S,
- uint16_t fftLen,
- uint8_t ifftFlag,
- uint8_t bitReverseFlag);
-
-/* Deprecated */
- void arm_cfft_radix2_q15(
- const arm_cfft_radix2_instance_q15 * S,
- q15_t * pSrc);
-
-
- /**
- * @brief Instance structure for the Q15 CFFT/CIFFT function.
- */
- typedef struct
- {
- uint16_t fftLen; /**< length of the FFT. */
- uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
- uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
- q15_t *pTwiddle; /**< points to the twiddle factor table. */
- uint16_t *pBitRevTable; /**< points to the bit reversal table. */
- uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
- uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
- } arm_cfft_radix4_instance_q15;
-
-/* Deprecated */
- arm_status arm_cfft_radix4_init_q15(
- arm_cfft_radix4_instance_q15 * S,
- uint16_t fftLen,
- uint8_t ifftFlag,
- uint8_t bitReverseFlag);
-
-/* Deprecated */
- void arm_cfft_radix4_q15(
- const arm_cfft_radix4_instance_q15 * S,
- q15_t * pSrc);
-
- /**
- * @brief Instance structure for the Radix-2 Q31 CFFT/CIFFT function.
- */
- typedef struct
- {
- uint16_t fftLen; /**< length of the FFT. */
- uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
- uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
- q31_t *pTwiddle; /**< points to the Twiddle factor table. */
- uint16_t *pBitRevTable; /**< points to the bit reversal table. */
- uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
- uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
- } arm_cfft_radix2_instance_q31;
-
-/* Deprecated */
- arm_status arm_cfft_radix2_init_q31(
- arm_cfft_radix2_instance_q31 * S,
- uint16_t fftLen,
- uint8_t ifftFlag,
- uint8_t bitReverseFlag);
-
-/* Deprecated */
- void arm_cfft_radix2_q31(
- const arm_cfft_radix2_instance_q31 * S,
- q31_t * pSrc);
-
- /**
- * @brief Instance structure for the Q31 CFFT/CIFFT function.
- */
- typedef struct
- {
- uint16_t fftLen; /**< length of the FFT. */
- uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
- uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
- q31_t *pTwiddle; /**< points to the twiddle factor table. */
- uint16_t *pBitRevTable; /**< points to the bit reversal table. */
- uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
- uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
- } arm_cfft_radix4_instance_q31;
-
-/* Deprecated */
- void arm_cfft_radix4_q31(
- const arm_cfft_radix4_instance_q31 * S,
- q31_t * pSrc);
-
-/* Deprecated */
- arm_status arm_cfft_radix4_init_q31(
- arm_cfft_radix4_instance_q31 * S,
- uint16_t fftLen,
- uint8_t ifftFlag,
- uint8_t bitReverseFlag);
-
- /**
- * @brief Instance structure for the floating-point CFFT/CIFFT function.
- */
- typedef struct
- {
- uint16_t fftLen; /**< length of the FFT. */
- uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
- uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
- float32_t *pTwiddle; /**< points to the Twiddle factor table. */
- uint16_t *pBitRevTable; /**< points to the bit reversal table. */
- uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
- uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
- float32_t onebyfftLen; /**< value of 1/fftLen. */
- } arm_cfft_radix2_instance_f32;
-
-/* Deprecated */
- arm_status arm_cfft_radix2_init_f32(
- arm_cfft_radix2_instance_f32 * S,
- uint16_t fftLen,
- uint8_t ifftFlag,
- uint8_t bitReverseFlag);
-
-/* Deprecated */
- void arm_cfft_radix2_f32(
- const arm_cfft_radix2_instance_f32 * S,
- float32_t * pSrc);
-
- /**
- * @brief Instance structure for the floating-point CFFT/CIFFT function.
- */
- typedef struct
- {
- uint16_t fftLen; /**< length of the FFT. */
- uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
- uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
- float32_t *pTwiddle; /**< points to the Twiddle factor table. */
- uint16_t *pBitRevTable; /**< points to the bit reversal table. */
- uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
- uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
- float32_t onebyfftLen; /**< value of 1/fftLen. */
- } arm_cfft_radix4_instance_f32;
-
-/* Deprecated */
- arm_status arm_cfft_radix4_init_f32(
- arm_cfft_radix4_instance_f32 * S,
- uint16_t fftLen,
- uint8_t ifftFlag,
- uint8_t bitReverseFlag);
-
-/* Deprecated */
- void arm_cfft_radix4_f32(
- const arm_cfft_radix4_instance_f32 * S,
- float32_t * pSrc);
-
- /**
- * @brief Instance structure for the fixed-point CFFT/CIFFT function.
- */
- typedef struct
- {
- uint16_t fftLen; /**< length of the FFT. */
- const q15_t *pTwiddle; /**< points to the Twiddle factor table. */
- const uint16_t *pBitRevTable; /**< points to the bit reversal table. */
- uint16_t bitRevLength; /**< bit reversal table length. */
- } arm_cfft_instance_q15;
-
-void arm_cfft_q15(
- const arm_cfft_instance_q15 * S,
- q15_t * p1,
- uint8_t ifftFlag,
- uint8_t bitReverseFlag);
-
- /**
- * @brief Instance structure for the fixed-point CFFT/CIFFT function.
- */
- typedef struct
- {
- uint16_t fftLen; /**< length of the FFT. */
- const q31_t *pTwiddle; /**< points to the Twiddle factor table. */
- const uint16_t *pBitRevTable; /**< points to the bit reversal table. */
- uint16_t bitRevLength; /**< bit reversal table length. */
- } arm_cfft_instance_q31;
-
-void arm_cfft_q31(
- const arm_cfft_instance_q31 * S,
- q31_t * p1,
- uint8_t ifftFlag,
- uint8_t bitReverseFlag);
-
- /**
- * @brief Instance structure for the floating-point CFFT/CIFFT function.
- */
- typedef struct
- {
- uint16_t fftLen; /**< length of the FFT. */
- const float32_t *pTwiddle; /**< points to the Twiddle factor table. */
- const uint16_t *pBitRevTable; /**< points to the bit reversal table. */
- uint16_t bitRevLength; /**< bit reversal table length. */
- } arm_cfft_instance_f32;
-
- void arm_cfft_f32(
- const arm_cfft_instance_f32 * S,
- float32_t * p1,
- uint8_t ifftFlag,
- uint8_t bitReverseFlag);
-
- /**
- * @brief Instance structure for the Q15 RFFT/RIFFT function.
- */
- typedef struct
- {
- uint32_t fftLenReal; /**< length of the real FFT. */
- uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
- uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
- uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
- q15_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
- q15_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
- const arm_cfft_instance_q15 *pCfft; /**< points to the complex FFT instance. */
- } arm_rfft_instance_q15;
-
- arm_status arm_rfft_init_q15(
- arm_rfft_instance_q15 * S,
- uint32_t fftLenReal,
- uint32_t ifftFlagR,
- uint32_t bitReverseFlag);
-
- void arm_rfft_q15(
- const arm_rfft_instance_q15 * S,
- q15_t * pSrc,
- q15_t * pDst);
-
- /**
- * @brief Instance structure for the Q31 RFFT/RIFFT function.
- */
- typedef struct
- {
- uint32_t fftLenReal; /**< length of the real FFT. */
- uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
- uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
- uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
- q31_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
- q31_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
- const arm_cfft_instance_q31 *pCfft; /**< points to the complex FFT instance. */
- } arm_rfft_instance_q31;
-
- arm_status arm_rfft_init_q31(
- arm_rfft_instance_q31 * S,
- uint32_t fftLenReal,
- uint32_t ifftFlagR,
- uint32_t bitReverseFlag);
-
- void arm_rfft_q31(
- const arm_rfft_instance_q31 * S,
- q31_t * pSrc,
- q31_t * pDst);
-
- /**
- * @brief Instance structure for the floating-point RFFT/RIFFT function.
- */
- typedef struct
- {
- uint32_t fftLenReal; /**< length of the real FFT. */
- uint16_t fftLenBy2; /**< length of the complex FFT. */
- uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
- uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
- uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
- float32_t *pTwiddleAReal; /**< points to the real twiddle factor table. */
- float32_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */
- arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */
- } arm_rfft_instance_f32;
-
- arm_status arm_rfft_init_f32(
- arm_rfft_instance_f32 * S,
- arm_cfft_radix4_instance_f32 * S_CFFT,
- uint32_t fftLenReal,
- uint32_t ifftFlagR,
- uint32_t bitReverseFlag);
-
- void arm_rfft_f32(
- const arm_rfft_instance_f32 * S,
- float32_t * pSrc,
- float32_t * pDst);
-
- /**
- * @brief Instance structure for the floating-point RFFT/RIFFT function.
- */
-typedef struct
- {
- arm_cfft_instance_f32 Sint; /**< Internal CFFT structure. */
- uint16_t fftLenRFFT; /**< length of the real sequence */
- float32_t * pTwiddleRFFT; /**< Twiddle factors real stage */
- } arm_rfft_fast_instance_f32 ;
-
-arm_status arm_rfft_fast_init_f32 (
- arm_rfft_fast_instance_f32 * S,
- uint16_t fftLen);
-
-void arm_rfft_fast_f32(
- arm_rfft_fast_instance_f32 * S,
- float32_t * p, float32_t * pOut,
- uint8_t ifftFlag);
-
- /**
- * @brief Instance structure for the floating-point DCT4/IDCT4 function.
- */
- typedef struct
- {
- uint16_t N; /**< length of the DCT4. */
- uint16_t Nby2; /**< half of the length of the DCT4. */
- float32_t normalize; /**< normalizing factor. */
- float32_t *pTwiddle; /**< points to the twiddle factor table. */
- float32_t *pCosFactor; /**< points to the cosFactor table. */
- arm_rfft_instance_f32 *pRfft; /**< points to the real FFT instance. */
- arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */
- } arm_dct4_instance_f32;
-
-
- /**
- * @brief Initialization function for the floating-point DCT4/IDCT4.
- * @param[in,out] S points to an instance of floating-point DCT4/IDCT4 structure.
- * @param[in] S_RFFT points to an instance of floating-point RFFT/RIFFT structure.
- * @param[in] S_CFFT points to an instance of floating-point CFFT/CIFFT structure.
- * @param[in] N length of the DCT4.
- * @param[in] Nby2 half of the length of the DCT4.
- * @param[in] normalize normalizing factor.
- * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>fftLenReal</code> is not a supported transform length.
- */
- arm_status arm_dct4_init_f32(
- arm_dct4_instance_f32 * S,
- arm_rfft_instance_f32 * S_RFFT,
- arm_cfft_radix4_instance_f32 * S_CFFT,
- uint16_t N,
- uint16_t Nby2,
- float32_t normalize);
-
-
- /**
- * @brief Processing function for the floating-point DCT4/IDCT4.
- * @param[in] S points to an instance of the floating-point DCT4/IDCT4 structure.
- * @param[in] pState points to state buffer.
- * @param[in,out] pInlineBuffer points to the in-place input and output buffer.
- */
- void arm_dct4_f32(
- const arm_dct4_instance_f32 * S,
- float32_t * pState,
- float32_t * pInlineBuffer);
-
-
- /**
- * @brief Instance structure for the Q31 DCT4/IDCT4 function.
- */
- typedef struct
- {
- uint16_t N; /**< length of the DCT4. */
- uint16_t Nby2; /**< half of the length of the DCT4. */
- q31_t normalize; /**< normalizing factor. */
- q31_t *pTwiddle; /**< points to the twiddle factor table. */
- q31_t *pCosFactor; /**< points to the cosFactor table. */
- arm_rfft_instance_q31 *pRfft; /**< points to the real FFT instance. */
- arm_cfft_radix4_instance_q31 *pCfft; /**< points to the complex FFT instance. */
- } arm_dct4_instance_q31;
-
-
- /**
- * @brief Initialization function for the Q31 DCT4/IDCT4.
- * @param[in,out] S points to an instance of Q31 DCT4/IDCT4 structure.
- * @param[in] S_RFFT points to an instance of Q31 RFFT/RIFFT structure
- * @param[in] S_CFFT points to an instance of Q31 CFFT/CIFFT structure
- * @param[in] N length of the DCT4.
- * @param[in] Nby2 half of the length of the DCT4.
- * @param[in] normalize normalizing factor.
- * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>N</code> is not a supported transform length.
- */
- arm_status arm_dct4_init_q31(
- arm_dct4_instance_q31 * S,
- arm_rfft_instance_q31 * S_RFFT,
- arm_cfft_radix4_instance_q31 * S_CFFT,
- uint16_t N,
- uint16_t Nby2,
- q31_t normalize);
-
-
- /**
- * @brief Processing function for the Q31 DCT4/IDCT4.
- * @param[in] S points to an instance of the Q31 DCT4 structure.
- * @param[in] pState points to state buffer.
- * @param[in,out] pInlineBuffer points to the in-place input and output buffer.
- */
- void arm_dct4_q31(
- const arm_dct4_instance_q31 * S,
- q31_t * pState,
- q31_t * pInlineBuffer);
-
-
- /**
- * @brief Instance structure for the Q15 DCT4/IDCT4 function.
- */
- typedef struct
- {
- uint16_t N; /**< length of the DCT4. */
- uint16_t Nby2; /**< half of the length of the DCT4. */
- q15_t normalize; /**< normalizing factor. */
- q15_t *pTwiddle; /**< points to the twiddle factor table. */
- q15_t *pCosFactor; /**< points to the cosFactor table. */
- arm_rfft_instance_q15 *pRfft; /**< points to the real FFT instance. */
- arm_cfft_radix4_instance_q15 *pCfft; /**< points to the complex FFT instance. */
- } arm_dct4_instance_q15;
-
-
- /**
- * @brief Initialization function for the Q15 DCT4/IDCT4.
- * @param[in,out] S points to an instance of Q15 DCT4/IDCT4 structure.
- * @param[in] S_RFFT points to an instance of Q15 RFFT/RIFFT structure.
- * @param[in] S_CFFT points to an instance of Q15 CFFT/CIFFT structure.
- * @param[in] N length of the DCT4.
- * @param[in] Nby2 half of the length of the DCT4.
- * @param[in] normalize normalizing factor.
- * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>N</code> is not a supported transform length.
- */
- arm_status arm_dct4_init_q15(
- arm_dct4_instance_q15 * S,
- arm_rfft_instance_q15 * S_RFFT,
- arm_cfft_radix4_instance_q15 * S_CFFT,
- uint16_t N,
- uint16_t Nby2,
- q15_t normalize);
-
-
- /**
- * @brief Processing function for the Q15 DCT4/IDCT4.
- * @param[in] S points to an instance of the Q15 DCT4 structure.
- * @param[in] pState points to state buffer.
- * @param[in,out] pInlineBuffer points to the in-place input and output buffer.
- */
- void arm_dct4_q15(
- const arm_dct4_instance_q15 * S,
- q15_t * pState,
- q15_t * pInlineBuffer);
-
-
- /**
- * @brief Floating-point vector addition.
- * @param[in] pSrcA points to the first input vector
- * @param[in] pSrcB points to the second input vector
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in each vector
- */
- void arm_add_f32(
- float32_t * pSrcA,
- float32_t * pSrcB,
- float32_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Q7 vector addition.
- * @param[in] pSrcA points to the first input vector
- * @param[in] pSrcB points to the second input vector
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in each vector
- */
- void arm_add_q7(
- q7_t * pSrcA,
- q7_t * pSrcB,
- q7_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Q15 vector addition.
- * @param[in] pSrcA points to the first input vector
- * @param[in] pSrcB points to the second input vector
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in each vector
- */
- void arm_add_q15(
- q15_t * pSrcA,
- q15_t * pSrcB,
- q15_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Q31 vector addition.
- * @param[in] pSrcA points to the first input vector
- * @param[in] pSrcB points to the second input vector
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in each vector
- */
- void arm_add_q31(
- q31_t * pSrcA,
- q31_t * pSrcB,
- q31_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Floating-point vector subtraction.
- * @param[in] pSrcA points to the first input vector
- * @param[in] pSrcB points to the second input vector
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in each vector
- */
- void arm_sub_f32(
- float32_t * pSrcA,
- float32_t * pSrcB,
- float32_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Q7 vector subtraction.
- * @param[in] pSrcA points to the first input vector
- * @param[in] pSrcB points to the second input vector
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in each vector
- */
- void arm_sub_q7(
- q7_t * pSrcA,
- q7_t * pSrcB,
- q7_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Q15 vector subtraction.
- * @param[in] pSrcA points to the first input vector
- * @param[in] pSrcB points to the second input vector
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in each vector
- */
- void arm_sub_q15(
- q15_t * pSrcA,
- q15_t * pSrcB,
- q15_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Q31 vector subtraction.
- * @param[in] pSrcA points to the first input vector
- * @param[in] pSrcB points to the second input vector
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in each vector
- */
- void arm_sub_q31(
- q31_t * pSrcA,
- q31_t * pSrcB,
- q31_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Multiplies a floating-point vector by a scalar.
- * @param[in] pSrc points to the input vector
- * @param[in] scale scale factor to be applied
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- */
- void arm_scale_f32(
- float32_t * pSrc,
- float32_t scale,
- float32_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Multiplies a Q7 vector by a scalar.
- * @param[in] pSrc points to the input vector
- * @param[in] scaleFract fractional portion of the scale value
- * @param[in] shift number of bits to shift the result by
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- */
- void arm_scale_q7(
- q7_t * pSrc,
- q7_t scaleFract,
- int8_t shift,
- q7_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Multiplies a Q15 vector by a scalar.
- * @param[in] pSrc points to the input vector
- * @param[in] scaleFract fractional portion of the scale value
- * @param[in] shift number of bits to shift the result by
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- */
- void arm_scale_q15(
- q15_t * pSrc,
- q15_t scaleFract,
- int8_t shift,
- q15_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Multiplies a Q31 vector by a scalar.
- * @param[in] pSrc points to the input vector
- * @param[in] scaleFract fractional portion of the scale value
- * @param[in] shift number of bits to shift the result by
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- */
- void arm_scale_q31(
- q31_t * pSrc,
- q31_t scaleFract,
- int8_t shift,
- q31_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Q7 vector absolute value.
- * @param[in] pSrc points to the input buffer
- * @param[out] pDst points to the output buffer
- * @param[in] blockSize number of samples in each vector
- */
- void arm_abs_q7(
- q7_t * pSrc,
- q7_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Floating-point vector absolute value.
- * @param[in] pSrc points to the input buffer
- * @param[out] pDst points to the output buffer
- * @param[in] blockSize number of samples in each vector
- */
- void arm_abs_f32(
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Q15 vector absolute value.
- * @param[in] pSrc points to the input buffer
- * @param[out] pDst points to the output buffer
- * @param[in] blockSize number of samples in each vector
- */
- void arm_abs_q15(
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Q31 vector absolute value.
- * @param[in] pSrc points to the input buffer
- * @param[out] pDst points to the output buffer
- * @param[in] blockSize number of samples in each vector
- */
- void arm_abs_q31(
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Dot product of floating-point vectors.
- * @param[in] pSrcA points to the first input vector
- * @param[in] pSrcB points to the second input vector
- * @param[in] blockSize number of samples in each vector
- * @param[out] result output result returned here
- */
- void arm_dot_prod_f32(
- float32_t * pSrcA,
- float32_t * pSrcB,
- uint32_t blockSize,
- float32_t * result);
-
-
- /**
- * @brief Dot product of Q7 vectors.
- * @param[in] pSrcA points to the first input vector
- * @param[in] pSrcB points to the second input vector
- * @param[in] blockSize number of samples in each vector
- * @param[out] result output result returned here
- */
- void arm_dot_prod_q7(
- q7_t * pSrcA,
- q7_t * pSrcB,
- uint32_t blockSize,
- q31_t * result);
-
-
- /**
- * @brief Dot product of Q15 vectors.
- * @param[in] pSrcA points to the first input vector
- * @param[in] pSrcB points to the second input vector
- * @param[in] blockSize number of samples in each vector
- * @param[out] result output result returned here
- */
- void arm_dot_prod_q15(
- q15_t * pSrcA,
- q15_t * pSrcB,
- uint32_t blockSize,
- q63_t * result);
-
-
- /**
- * @brief Dot product of Q31 vectors.
- * @param[in] pSrcA points to the first input vector
- * @param[in] pSrcB points to the second input vector
- * @param[in] blockSize number of samples in each vector
- * @param[out] result output result returned here
- */
- void arm_dot_prod_q31(
- q31_t * pSrcA,
- q31_t * pSrcB,
- uint32_t blockSize,
- q63_t * result);
-
-
- /**
- * @brief Shifts the elements of a Q7 vector a specified number of bits.
- * @param[in] pSrc points to the input vector
- * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- */
- void arm_shift_q7(
- q7_t * pSrc,
- int8_t shiftBits,
- q7_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Shifts the elements of a Q15 vector a specified number of bits.
- * @param[in] pSrc points to the input vector
- * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- */
- void arm_shift_q15(
- q15_t * pSrc,
- int8_t shiftBits,
- q15_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Shifts the elements of a Q31 vector a specified number of bits.
- * @param[in] pSrc points to the input vector
- * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right.
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- */
- void arm_shift_q31(
- q31_t * pSrc,
- int8_t shiftBits,
- q31_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Adds a constant offset to a floating-point vector.
- * @param[in] pSrc points to the input vector
- * @param[in] offset is the offset to be added
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- */
- void arm_offset_f32(
- float32_t * pSrc,
- float32_t offset,
- float32_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Adds a constant offset to a Q7 vector.
- * @param[in] pSrc points to the input vector
- * @param[in] offset is the offset to be added
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- */
- void arm_offset_q7(
- q7_t * pSrc,
- q7_t offset,
- q7_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Adds a constant offset to a Q15 vector.
- * @param[in] pSrc points to the input vector
- * @param[in] offset is the offset to be added
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- */
- void arm_offset_q15(
- q15_t * pSrc,
- q15_t offset,
- q15_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Adds a constant offset to a Q31 vector.
- * @param[in] pSrc points to the input vector
- * @param[in] offset is the offset to be added
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- */
- void arm_offset_q31(
- q31_t * pSrc,
- q31_t offset,
- q31_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Negates the elements of a floating-point vector.
- * @param[in] pSrc points to the input vector
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- */
- void arm_negate_f32(
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Negates the elements of a Q7 vector.
- * @param[in] pSrc points to the input vector
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- */
- void arm_negate_q7(
- q7_t * pSrc,
- q7_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Negates the elements of a Q15 vector.
- * @param[in] pSrc points to the input vector
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- */
- void arm_negate_q15(
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Negates the elements of a Q31 vector.
- * @param[in] pSrc points to the input vector
- * @param[out] pDst points to the output vector
- * @param[in] blockSize number of samples in the vector
- */
- void arm_negate_q31(
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Copies the elements of a floating-point vector.
- * @param[in] pSrc input pointer
- * @param[out] pDst output pointer
- * @param[in] blockSize number of samples to process
- */
- void arm_copy_f32(
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Copies the elements of a Q7 vector.
- * @param[in] pSrc input pointer
- * @param[out] pDst output pointer
- * @param[in] blockSize number of samples to process
- */
- void arm_copy_q7(
- q7_t * pSrc,
- q7_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Copies the elements of a Q15 vector.
- * @param[in] pSrc input pointer
- * @param[out] pDst output pointer
- * @param[in] blockSize number of samples to process
- */
- void arm_copy_q15(
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Copies the elements of a Q31 vector.
- * @param[in] pSrc input pointer
- * @param[out] pDst output pointer
- * @param[in] blockSize number of samples to process
- */
- void arm_copy_q31(
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Fills a constant value into a floating-point vector.
- * @param[in] value input value to be filled
- * @param[out] pDst output pointer
- * @param[in] blockSize number of samples to process
- */
- void arm_fill_f32(
- float32_t value,
- float32_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Fills a constant value into a Q7 vector.
- * @param[in] value input value to be filled
- * @param[out] pDst output pointer
- * @param[in] blockSize number of samples to process
- */
- void arm_fill_q7(
- q7_t value,
- q7_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Fills a constant value into a Q15 vector.
- * @param[in] value input value to be filled
- * @param[out] pDst output pointer
- * @param[in] blockSize number of samples to process
- */
- void arm_fill_q15(
- q15_t value,
- q15_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Fills a constant value into a Q31 vector.
- * @param[in] value input value to be filled
- * @param[out] pDst output pointer
- * @param[in] blockSize number of samples to process
- */
- void arm_fill_q31(
- q31_t value,
- q31_t * pDst,
- uint32_t blockSize);
-
-
-/**
- * @brief Convolution of floating-point sequences.
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the location where the output result is written. Length srcALen+srcBLen-1.
- */
- void arm_conv_f32(
- float32_t * pSrcA,
- uint32_t srcALen,
- float32_t * pSrcB,
- uint32_t srcBLen,
- float32_t * pDst);
-
-
- /**
- * @brief Convolution of Q15 sequences.
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
- * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
- */
- void arm_conv_opt_q15(
- q15_t * pSrcA,
- uint32_t srcALen,
- q15_t * pSrcB,
- uint32_t srcBLen,
- q15_t * pDst,
- q15_t * pScratch1,
- q15_t * pScratch2);
-
-
-/**
- * @brief Convolution of Q15 sequences.
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the location where the output result is written. Length srcALen+srcBLen-1.
- */
- void arm_conv_q15(
- q15_t * pSrcA,
- uint32_t srcALen,
- q15_t * pSrcB,
- uint32_t srcBLen,
- q15_t * pDst);
-
-
- /**
- * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
- */
- void arm_conv_fast_q15(
- q15_t * pSrcA,
- uint32_t srcALen,
- q15_t * pSrcB,
- uint32_t srcBLen,
- q15_t * pDst);
-
-
- /**
- * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
- * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
- */
- void arm_conv_fast_opt_q15(
- q15_t * pSrcA,
- uint32_t srcALen,
- q15_t * pSrcB,
- uint32_t srcBLen,
- q15_t * pDst,
- q15_t * pScratch1,
- q15_t * pScratch2);
-
-
- /**
- * @brief Convolution of Q31 sequences.
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
- */
- void arm_conv_q31(
- q31_t * pSrcA,
- uint32_t srcALen,
- q31_t * pSrcB,
- uint32_t srcBLen,
- q31_t * pDst);
-
-
- /**
- * @brief Convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
- */
- void arm_conv_fast_q31(
- q31_t * pSrcA,
- uint32_t srcALen,
- q31_t * pSrcB,
- uint32_t srcBLen,
- q31_t * pDst);
-
-
- /**
- * @brief Convolution of Q7 sequences.
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
- * @param[in] pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- * @param[in] pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
- */
- void arm_conv_opt_q7(
- q7_t * pSrcA,
- uint32_t srcALen,
- q7_t * pSrcB,
- uint32_t srcBLen,
- q7_t * pDst,
- q15_t * pScratch1,
- q15_t * pScratch2);
-
-
- /**
- * @brief Convolution of Q7 sequences.
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1.
- */
- void arm_conv_q7(
- q7_t * pSrcA,
- uint32_t srcALen,
- q7_t * pSrcB,
- uint32_t srcBLen,
- q7_t * pDst);
-
-
- /**
- * @brief Partial convolution of floating-point sequences.
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the block of output data
- * @param[in] firstIndex is the first output sample to start with.
- * @param[in] numPoints is the number of output points to be computed.
- * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
- arm_status arm_conv_partial_f32(
- float32_t * pSrcA,
- uint32_t srcALen,
- float32_t * pSrcB,
- uint32_t srcBLen,
- float32_t * pDst,
- uint32_t firstIndex,
- uint32_t numPoints);
-
-
- /**
- * @brief Partial convolution of Q15 sequences.
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the block of output data
- * @param[in] firstIndex is the first output sample to start with.
- * @param[in] numPoints is the number of output points to be computed.
- * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
- * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
- arm_status arm_conv_partial_opt_q15(
- q15_t * pSrcA,
- uint32_t srcALen,
- q15_t * pSrcB,
- uint32_t srcBLen,
- q15_t * pDst,
- uint32_t firstIndex,
- uint32_t numPoints,
- q15_t * pScratch1,
- q15_t * pScratch2);
-
-
- /**
- * @brief Partial convolution of Q15 sequences.
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the block of output data
- * @param[in] firstIndex is the first output sample to start with.
- * @param[in] numPoints is the number of output points to be computed.
- * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
- arm_status arm_conv_partial_q15(
- q15_t * pSrcA,
- uint32_t srcALen,
- q15_t * pSrcB,
- uint32_t srcBLen,
- q15_t * pDst,
- uint32_t firstIndex,
- uint32_t numPoints);
-
-
- /**
- * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the block of output data
- * @param[in] firstIndex is the first output sample to start with.
- * @param[in] numPoints is the number of output points to be computed.
- * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
- arm_status arm_conv_partial_fast_q15(
- q15_t * pSrcA,
- uint32_t srcALen,
- q15_t * pSrcB,
- uint32_t srcBLen,
- q15_t * pDst,
- uint32_t firstIndex,
- uint32_t numPoints);
-
-
- /**
- * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the block of output data
- * @param[in] firstIndex is the first output sample to start with.
- * @param[in] numPoints is the number of output points to be computed.
- * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
- * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
- arm_status arm_conv_partial_fast_opt_q15(
- q15_t * pSrcA,
- uint32_t srcALen,
- q15_t * pSrcB,
- uint32_t srcBLen,
- q15_t * pDst,
- uint32_t firstIndex,
- uint32_t numPoints,
- q15_t * pScratch1,
- q15_t * pScratch2);
-
-
- /**
- * @brief Partial convolution of Q31 sequences.
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the block of output data
- * @param[in] firstIndex is the first output sample to start with.
- * @param[in] numPoints is the number of output points to be computed.
- * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
- arm_status arm_conv_partial_q31(
- q31_t * pSrcA,
- uint32_t srcALen,
- q31_t * pSrcB,
- uint32_t srcBLen,
- q31_t * pDst,
- uint32_t firstIndex,
- uint32_t numPoints);
-
-
- /**
- * @brief Partial convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the block of output data
- * @param[in] firstIndex is the first output sample to start with.
- * @param[in] numPoints is the number of output points to be computed.
- * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
- arm_status arm_conv_partial_fast_q31(
- q31_t * pSrcA,
- uint32_t srcALen,
- q31_t * pSrcB,
- uint32_t srcBLen,
- q31_t * pDst,
- uint32_t firstIndex,
- uint32_t numPoints);
-
-
- /**
- * @brief Partial convolution of Q7 sequences
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the block of output data
- * @param[in] firstIndex is the first output sample to start with.
- * @param[in] numPoints is the number of output points to be computed.
- * @param[in] pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- * @param[in] pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
- * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
- arm_status arm_conv_partial_opt_q7(
- q7_t * pSrcA,
- uint32_t srcALen,
- q7_t * pSrcB,
- uint32_t srcBLen,
- q7_t * pDst,
- uint32_t firstIndex,
- uint32_t numPoints,
- q15_t * pScratch1,
- q15_t * pScratch2);
-
-
-/**
- * @brief Partial convolution of Q7 sequences.
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the block of output data
- * @param[in] firstIndex is the first output sample to start with.
- * @param[in] numPoints is the number of output points to be computed.
- * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
- */
- arm_status arm_conv_partial_q7(
- q7_t * pSrcA,
- uint32_t srcALen,
- q7_t * pSrcB,
- uint32_t srcBLen,
- q7_t * pDst,
- uint32_t firstIndex,
- uint32_t numPoints);
-
-
- /**
- * @brief Instance structure for the Q15 FIR decimator.
- */
- typedef struct
- {
- uint8_t M; /**< decimation factor. */
- uint16_t numTaps; /**< number of coefficients in the filter. */
- q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
- q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
- } arm_fir_decimate_instance_q15;
-
- /**
- * @brief Instance structure for the Q31 FIR decimator.
- */
- typedef struct
- {
- uint8_t M; /**< decimation factor. */
- uint16_t numTaps; /**< number of coefficients in the filter. */
- q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
- q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
- } arm_fir_decimate_instance_q31;
-
- /**
- * @brief Instance structure for the floating-point FIR decimator.
- */
- typedef struct
- {
- uint8_t M; /**< decimation factor. */
- uint16_t numTaps; /**< number of coefficients in the filter. */
- float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
- float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
- } arm_fir_decimate_instance_f32;
-
-
- /**
- * @brief Processing function for the floating-point FIR decimator.
- * @param[in] S points to an instance of the floating-point FIR decimator structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data
- * @param[in] blockSize number of input samples to process per call.
- */
- void arm_fir_decimate_f32(
- const arm_fir_decimate_instance_f32 * S,
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the floating-point FIR decimator.
- * @param[in,out] S points to an instance of the floating-point FIR decimator structure.
- * @param[in] numTaps number of coefficients in the filter.
- * @param[in] M decimation factor.
- * @param[in] pCoeffs points to the filter coefficients.
- * @param[in] pState points to the state buffer.
- * @param[in] blockSize number of input samples to process per call.
- * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
- * <code>blockSize</code> is not a multiple of <code>M</code>.
- */
- arm_status arm_fir_decimate_init_f32(
- arm_fir_decimate_instance_f32 * S,
- uint16_t numTaps,
- uint8_t M,
- float32_t * pCoeffs,
- float32_t * pState,
- uint32_t blockSize);
-
-
- /**
- * @brief Processing function for the Q15 FIR decimator.
- * @param[in] S points to an instance of the Q15 FIR decimator structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data
- * @param[in] blockSize number of input samples to process per call.
- */
- void arm_fir_decimate_q15(
- const arm_fir_decimate_instance_q15 * S,
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Processing function for the Q15 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4.
- * @param[in] S points to an instance of the Q15 FIR decimator structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data
- * @param[in] blockSize number of input samples to process per call.
- */
- void arm_fir_decimate_fast_q15(
- const arm_fir_decimate_instance_q15 * S,
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the Q15 FIR decimator.
- * @param[in,out] S points to an instance of the Q15 FIR decimator structure.
- * @param[in] numTaps number of coefficients in the filter.
- * @param[in] M decimation factor.
- * @param[in] pCoeffs points to the filter coefficients.
- * @param[in] pState points to the state buffer.
- * @param[in] blockSize number of input samples to process per call.
- * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
- * <code>blockSize</code> is not a multiple of <code>M</code>.
- */
- arm_status arm_fir_decimate_init_q15(
- arm_fir_decimate_instance_q15 * S,
- uint16_t numTaps,
- uint8_t M,
- q15_t * pCoeffs,
- q15_t * pState,
- uint32_t blockSize);
-
-
- /**
- * @brief Processing function for the Q31 FIR decimator.
- * @param[in] S points to an instance of the Q31 FIR decimator structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data
- * @param[in] blockSize number of input samples to process per call.
- */
- void arm_fir_decimate_q31(
- const arm_fir_decimate_instance_q31 * S,
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
- /**
- * @brief Processing function for the Q31 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4.
- * @param[in] S points to an instance of the Q31 FIR decimator structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data
- * @param[in] blockSize number of input samples to process per call.
- */
- void arm_fir_decimate_fast_q31(
- arm_fir_decimate_instance_q31 * S,
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the Q31 FIR decimator.
- * @param[in,out] S points to an instance of the Q31 FIR decimator structure.
- * @param[in] numTaps number of coefficients in the filter.
- * @param[in] M decimation factor.
- * @param[in] pCoeffs points to the filter coefficients.
- * @param[in] pState points to the state buffer.
- * @param[in] blockSize number of input samples to process per call.
- * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
- * <code>blockSize</code> is not a multiple of <code>M</code>.
- */
- arm_status arm_fir_decimate_init_q31(
- arm_fir_decimate_instance_q31 * S,
- uint16_t numTaps,
- uint8_t M,
- q31_t * pCoeffs,
- q31_t * pState,
- uint32_t blockSize);
-
-
- /**
- * @brief Instance structure for the Q15 FIR interpolator.
- */
- typedef struct
- {
- uint8_t L; /**< upsample factor. */
- uint16_t phaseLength; /**< length of each polyphase filter component. */
- q15_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
- q15_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */
- } arm_fir_interpolate_instance_q15;
-
- /**
- * @brief Instance structure for the Q31 FIR interpolator.
- */
- typedef struct
- {
- uint8_t L; /**< upsample factor. */
- uint16_t phaseLength; /**< length of each polyphase filter component. */
- q31_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
- q31_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */
- } arm_fir_interpolate_instance_q31;
-
- /**
- * @brief Instance structure for the floating-point FIR interpolator.
- */
- typedef struct
- {
- uint8_t L; /**< upsample factor. */
- uint16_t phaseLength; /**< length of each polyphase filter component. */
- float32_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */
- float32_t *pState; /**< points to the state variable array. The array is of length phaseLength+numTaps-1. */
- } arm_fir_interpolate_instance_f32;
-
-
- /**
- * @brief Processing function for the Q15 FIR interpolator.
- * @param[in] S points to an instance of the Q15 FIR interpolator structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data.
- * @param[in] blockSize number of input samples to process per call.
- */
- void arm_fir_interpolate_q15(
- const arm_fir_interpolate_instance_q15 * S,
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the Q15 FIR interpolator.
- * @param[in,out] S points to an instance of the Q15 FIR interpolator structure.
- * @param[in] L upsample factor.
- * @param[in] numTaps number of filter coefficients in the filter.
- * @param[in] pCoeffs points to the filter coefficient buffer.
- * @param[in] pState points to the state buffer.
- * @param[in] blockSize number of input samples to process per call.
- * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
- * the filter length <code>numTaps</code> is not a multiple of the interpolation factor <code>L</code>.
- */
- arm_status arm_fir_interpolate_init_q15(
- arm_fir_interpolate_instance_q15 * S,
- uint8_t L,
- uint16_t numTaps,
- q15_t * pCoeffs,
- q15_t * pState,
- uint32_t blockSize);
-
-
- /**
- * @brief Processing function for the Q31 FIR interpolator.
- * @param[in] S points to an instance of the Q15 FIR interpolator structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data.
- * @param[in] blockSize number of input samples to process per call.
- */
- void arm_fir_interpolate_q31(
- const arm_fir_interpolate_instance_q31 * S,
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the Q31 FIR interpolator.
- * @param[in,out] S points to an instance of the Q31 FIR interpolator structure.
- * @param[in] L upsample factor.
- * @param[in] numTaps number of filter coefficients in the filter.
- * @param[in] pCoeffs points to the filter coefficient buffer.
- * @param[in] pState points to the state buffer.
- * @param[in] blockSize number of input samples to process per call.
- * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
- * the filter length <code>numTaps</code> is not a multiple of the interpolation factor <code>L</code>.
- */
- arm_status arm_fir_interpolate_init_q31(
- arm_fir_interpolate_instance_q31 * S,
- uint8_t L,
- uint16_t numTaps,
- q31_t * pCoeffs,
- q31_t * pState,
- uint32_t blockSize);
-
-
- /**
- * @brief Processing function for the floating-point FIR interpolator.
- * @param[in] S points to an instance of the floating-point FIR interpolator structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data.
- * @param[in] blockSize number of input samples to process per call.
- */
- void arm_fir_interpolate_f32(
- const arm_fir_interpolate_instance_f32 * S,
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the floating-point FIR interpolator.
- * @param[in,out] S points to an instance of the floating-point FIR interpolator structure.
- * @param[in] L upsample factor.
- * @param[in] numTaps number of filter coefficients in the filter.
- * @param[in] pCoeffs points to the filter coefficient buffer.
- * @param[in] pState points to the state buffer.
- * @param[in] blockSize number of input samples to process per call.
- * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
- * the filter length <code>numTaps</code> is not a multiple of the interpolation factor <code>L</code>.
- */
- arm_status arm_fir_interpolate_init_f32(
- arm_fir_interpolate_instance_f32 * S,
- uint8_t L,
- uint16_t numTaps,
- float32_t * pCoeffs,
- float32_t * pState,
- uint32_t blockSize);
-
-
- /**
- * @brief Instance structure for the high precision Q31 Biquad cascade filter.
- */
- typedef struct
- {
- uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
- q63_t *pState; /**< points to the array of state coefficients. The array is of length 4*numStages. */
- q31_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
- uint8_t postShift; /**< additional shift, in bits, applied to each output sample. */
- } arm_biquad_cas_df1_32x64_ins_q31;
-
-
- /**
- * @param[in] S points to an instance of the high precision Q31 Biquad cascade filter structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data
- * @param[in] blockSize number of samples to process.
- */
- void arm_biquad_cas_df1_32x64_q31(
- const arm_biquad_cas_df1_32x64_ins_q31 * S,
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @param[in,out] S points to an instance of the high precision Q31 Biquad cascade filter structure.
- * @param[in] numStages number of 2nd order stages in the filter.
- * @param[in] pCoeffs points to the filter coefficients.
- * @param[in] pState points to the state buffer.
- * @param[in] postShift shift to be applied to the output. Varies according to the coefficients format
- */
- void arm_biquad_cas_df1_32x64_init_q31(
- arm_biquad_cas_df1_32x64_ins_q31 * S,
- uint8_t numStages,
- q31_t * pCoeffs,
- q63_t * pState,
- uint8_t postShift);
-
-
- /**
- * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
- */
- typedef struct
- {
- uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
- float32_t *pState; /**< points to the array of state coefficients. The array is of length 2*numStages. */
- float32_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
- } arm_biquad_cascade_df2T_instance_f32;
-
- /**
- * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
- */
- typedef struct
- {
- uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
- float32_t *pState; /**< points to the array of state coefficients. The array is of length 4*numStages. */
- float32_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
- } arm_biquad_cascade_stereo_df2T_instance_f32;
-
- /**
- * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
- */
- typedef struct
- {
- uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */
- float64_t *pState; /**< points to the array of state coefficients. The array is of length 2*numStages. */
- float64_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */
- } arm_biquad_cascade_df2T_instance_f64;
-
-
- /**
- * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter.
- * @param[in] S points to an instance of the filter data structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data
- * @param[in] blockSize number of samples to process.
- */
- void arm_biquad_cascade_df2T_f32(
- const arm_biquad_cascade_df2T_instance_f32 * S,
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter. 2 channels
- * @param[in] S points to an instance of the filter data structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data
- * @param[in] blockSize number of samples to process.
- */
- void arm_biquad_cascade_stereo_df2T_f32(
- const arm_biquad_cascade_stereo_df2T_instance_f32 * S,
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter.
- * @param[in] S points to an instance of the filter data structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data
- * @param[in] blockSize number of samples to process.
- */
- void arm_biquad_cascade_df2T_f64(
- const arm_biquad_cascade_df2T_instance_f64 * S,
- float64_t * pSrc,
- float64_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter.
- * @param[in,out] S points to an instance of the filter data structure.
- * @param[in] numStages number of 2nd order stages in the filter.
- * @param[in] pCoeffs points to the filter coefficients.
- * @param[in] pState points to the state buffer.
- */
- void arm_biquad_cascade_df2T_init_f32(
- arm_biquad_cascade_df2T_instance_f32 * S,
- uint8_t numStages,
- float32_t * pCoeffs,
- float32_t * pState);
-
-
- /**
- * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter.
- * @param[in,out] S points to an instance of the filter data structure.
- * @param[in] numStages number of 2nd order stages in the filter.
- * @param[in] pCoeffs points to the filter coefficients.
- * @param[in] pState points to the state buffer.
- */
- void arm_biquad_cascade_stereo_df2T_init_f32(
- arm_biquad_cascade_stereo_df2T_instance_f32 * S,
- uint8_t numStages,
- float32_t * pCoeffs,
- float32_t * pState);
-
-
- /**
- * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter.
- * @param[in,out] S points to an instance of the filter data structure.
- * @param[in] numStages number of 2nd order stages in the filter.
- * @param[in] pCoeffs points to the filter coefficients.
- * @param[in] pState points to the state buffer.
- */
- void arm_biquad_cascade_df2T_init_f64(
- arm_biquad_cascade_df2T_instance_f64 * S,
- uint8_t numStages,
- float64_t * pCoeffs,
- float64_t * pState);
-
-
- /**
- * @brief Instance structure for the Q15 FIR lattice filter.
- */
- typedef struct
- {
- uint16_t numStages; /**< number of filter stages. */
- q15_t *pState; /**< points to the state variable array. The array is of length numStages. */
- q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
- } arm_fir_lattice_instance_q15;
-
- /**
- * @brief Instance structure for the Q31 FIR lattice filter.
- */
- typedef struct
- {
- uint16_t numStages; /**< number of filter stages. */
- q31_t *pState; /**< points to the state variable array. The array is of length numStages. */
- q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
- } arm_fir_lattice_instance_q31;
-
- /**
- * @brief Instance structure for the floating-point FIR lattice filter.
- */
- typedef struct
- {
- uint16_t numStages; /**< number of filter stages. */
- float32_t *pState; /**< points to the state variable array. The array is of length numStages. */
- float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */
- } arm_fir_lattice_instance_f32;
-
-
- /**
- * @brief Initialization function for the Q15 FIR lattice filter.
- * @param[in] S points to an instance of the Q15 FIR lattice structure.
- * @param[in] numStages number of filter stages.
- * @param[in] pCoeffs points to the coefficient buffer. The array is of length numStages.
- * @param[in] pState points to the state buffer. The array is of length numStages.
- */
- void arm_fir_lattice_init_q15(
- arm_fir_lattice_instance_q15 * S,
- uint16_t numStages,
- q15_t * pCoeffs,
- q15_t * pState);
-
-
- /**
- * @brief Processing function for the Q15 FIR lattice filter.
- * @param[in] S points to an instance of the Q15 FIR lattice structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- */
- void arm_fir_lattice_q15(
- const arm_fir_lattice_instance_q15 * S,
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the Q31 FIR lattice filter.
- * @param[in] S points to an instance of the Q31 FIR lattice structure.
- * @param[in] numStages number of filter stages.
- * @param[in] pCoeffs points to the coefficient buffer. The array is of length numStages.
- * @param[in] pState points to the state buffer. The array is of length numStages.
- */
- void arm_fir_lattice_init_q31(
- arm_fir_lattice_instance_q31 * S,
- uint16_t numStages,
- q31_t * pCoeffs,
- q31_t * pState);
-
-
- /**
- * @brief Processing function for the Q31 FIR lattice filter.
- * @param[in] S points to an instance of the Q31 FIR lattice structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data
- * @param[in] blockSize number of samples to process.
- */
- void arm_fir_lattice_q31(
- const arm_fir_lattice_instance_q31 * S,
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
-
-/**
- * @brief Initialization function for the floating-point FIR lattice filter.
- * @param[in] S points to an instance of the floating-point FIR lattice structure.
- * @param[in] numStages number of filter stages.
- * @param[in] pCoeffs points to the coefficient buffer. The array is of length numStages.
- * @param[in] pState points to the state buffer. The array is of length numStages.
- */
- void arm_fir_lattice_init_f32(
- arm_fir_lattice_instance_f32 * S,
- uint16_t numStages,
- float32_t * pCoeffs,
- float32_t * pState);
-
-
- /**
- * @brief Processing function for the floating-point FIR lattice filter.
- * @param[in] S points to an instance of the floating-point FIR lattice structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data
- * @param[in] blockSize number of samples to process.
- */
- void arm_fir_lattice_f32(
- const arm_fir_lattice_instance_f32 * S,
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Instance structure for the Q15 IIR lattice filter.
- */
- typedef struct
- {
- uint16_t numStages; /**< number of stages in the filter. */
- q15_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
- q15_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
- q15_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
- } arm_iir_lattice_instance_q15;
-
- /**
- * @brief Instance structure for the Q31 IIR lattice filter.
- */
- typedef struct
- {
- uint16_t numStages; /**< number of stages in the filter. */
- q31_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
- q31_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
- q31_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
- } arm_iir_lattice_instance_q31;
-
- /**
- * @brief Instance structure for the floating-point IIR lattice filter.
- */
- typedef struct
- {
- uint16_t numStages; /**< number of stages in the filter. */
- float32_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */
- float32_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */
- float32_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */
- } arm_iir_lattice_instance_f32;
-
-
- /**
- * @brief Processing function for the floating-point IIR lattice filter.
- * @param[in] S points to an instance of the floating-point IIR lattice structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- */
- void arm_iir_lattice_f32(
- const arm_iir_lattice_instance_f32 * S,
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the floating-point IIR lattice filter.
- * @param[in] S points to an instance of the floating-point IIR lattice structure.
- * @param[in] numStages number of stages in the filter.
- * @param[in] pkCoeffs points to the reflection coefficient buffer. The array is of length numStages.
- * @param[in] pvCoeffs points to the ladder coefficient buffer. The array is of length numStages+1.
- * @param[in] pState points to the state buffer. The array is of length numStages+blockSize-1.
- * @param[in] blockSize number of samples to process.
- */
- void arm_iir_lattice_init_f32(
- arm_iir_lattice_instance_f32 * S,
- uint16_t numStages,
- float32_t * pkCoeffs,
- float32_t * pvCoeffs,
- float32_t * pState,
- uint32_t blockSize);
-
-
- /**
- * @brief Processing function for the Q31 IIR lattice filter.
- * @param[in] S points to an instance of the Q31 IIR lattice structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- */
- void arm_iir_lattice_q31(
- const arm_iir_lattice_instance_q31 * S,
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the Q31 IIR lattice filter.
- * @param[in] S points to an instance of the Q31 IIR lattice structure.
- * @param[in] numStages number of stages in the filter.
- * @param[in] pkCoeffs points to the reflection coefficient buffer. The array is of length numStages.
- * @param[in] pvCoeffs points to the ladder coefficient buffer. The array is of length numStages+1.
- * @param[in] pState points to the state buffer. The array is of length numStages+blockSize.
- * @param[in] blockSize number of samples to process.
- */
- void arm_iir_lattice_init_q31(
- arm_iir_lattice_instance_q31 * S,
- uint16_t numStages,
- q31_t * pkCoeffs,
- q31_t * pvCoeffs,
- q31_t * pState,
- uint32_t blockSize);
-
-
- /**
- * @brief Processing function for the Q15 IIR lattice filter.
- * @param[in] S points to an instance of the Q15 IIR lattice structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data.
- * @param[in] blockSize number of samples to process.
- */
- void arm_iir_lattice_q15(
- const arm_iir_lattice_instance_q15 * S,
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
-
-/**
- * @brief Initialization function for the Q15 IIR lattice filter.
- * @param[in] S points to an instance of the fixed-point Q15 IIR lattice structure.
- * @param[in] numStages number of stages in the filter.
- * @param[in] pkCoeffs points to reflection coefficient buffer. The array is of length numStages.
- * @param[in] pvCoeffs points to ladder coefficient buffer. The array is of length numStages+1.
- * @param[in] pState points to state buffer. The array is of length numStages+blockSize.
- * @param[in] blockSize number of samples to process per call.
- */
- void arm_iir_lattice_init_q15(
- arm_iir_lattice_instance_q15 * S,
- uint16_t numStages,
- q15_t * pkCoeffs,
- q15_t * pvCoeffs,
- q15_t * pState,
- uint32_t blockSize);
-
-
- /**
- * @brief Instance structure for the floating-point LMS filter.
- */
- typedef struct
- {
- uint16_t numTaps; /**< number of coefficients in the filter. */
- float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
- float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
- float32_t mu; /**< step size that controls filter coefficient updates. */
- } arm_lms_instance_f32;
-
-
- /**
- * @brief Processing function for floating-point LMS filter.
- * @param[in] S points to an instance of the floating-point LMS filter structure.
- * @param[in] pSrc points to the block of input data.
- * @param[in] pRef points to the block of reference data.
- * @param[out] pOut points to the block of output data.
- * @param[out] pErr points to the block of error data.
- * @param[in] blockSize number of samples to process.
- */
- void arm_lms_f32(
- const arm_lms_instance_f32 * S,
- float32_t * pSrc,
- float32_t * pRef,
- float32_t * pOut,
- float32_t * pErr,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for floating-point LMS filter.
- * @param[in] S points to an instance of the floating-point LMS filter structure.
- * @param[in] numTaps number of filter coefficients.
- * @param[in] pCoeffs points to the coefficient buffer.
- * @param[in] pState points to state buffer.
- * @param[in] mu step size that controls filter coefficient updates.
- * @param[in] blockSize number of samples to process.
- */
- void arm_lms_init_f32(
- arm_lms_instance_f32 * S,
- uint16_t numTaps,
- float32_t * pCoeffs,
- float32_t * pState,
- float32_t mu,
- uint32_t blockSize);
-
-
- /**
- * @brief Instance structure for the Q15 LMS filter.
- */
- typedef struct
- {
- uint16_t numTaps; /**< number of coefficients in the filter. */
- q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
- q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
- q15_t mu; /**< step size that controls filter coefficient updates. */
- uint32_t postShift; /**< bit shift applied to coefficients. */
- } arm_lms_instance_q15;
-
-
- /**
- * @brief Initialization function for the Q15 LMS filter.
- * @param[in] S points to an instance of the Q15 LMS filter structure.
- * @param[in] numTaps number of filter coefficients.
- * @param[in] pCoeffs points to the coefficient buffer.
- * @param[in] pState points to the state buffer.
- * @param[in] mu step size that controls filter coefficient updates.
- * @param[in] blockSize number of samples to process.
- * @param[in] postShift bit shift applied to coefficients.
- */
- void arm_lms_init_q15(
- arm_lms_instance_q15 * S,
- uint16_t numTaps,
- q15_t * pCoeffs,
- q15_t * pState,
- q15_t mu,
- uint32_t blockSize,
- uint32_t postShift);
-
-
- /**
- * @brief Processing function for Q15 LMS filter.
- * @param[in] S points to an instance of the Q15 LMS filter structure.
- * @param[in] pSrc points to the block of input data.
- * @param[in] pRef points to the block of reference data.
- * @param[out] pOut points to the block of output data.
- * @param[out] pErr points to the block of error data.
- * @param[in] blockSize number of samples to process.
- */
- void arm_lms_q15(
- const arm_lms_instance_q15 * S,
- q15_t * pSrc,
- q15_t * pRef,
- q15_t * pOut,
- q15_t * pErr,
- uint32_t blockSize);
-
-
- /**
- * @brief Instance structure for the Q31 LMS filter.
- */
- typedef struct
- {
- uint16_t numTaps; /**< number of coefficients in the filter. */
- q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
- q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
- q31_t mu; /**< step size that controls filter coefficient updates. */
- uint32_t postShift; /**< bit shift applied to coefficients. */
- } arm_lms_instance_q31;
-
-
- /**
- * @brief Processing function for Q31 LMS filter.
- * @param[in] S points to an instance of the Q15 LMS filter structure.
- * @param[in] pSrc points to the block of input data.
- * @param[in] pRef points to the block of reference data.
- * @param[out] pOut points to the block of output data.
- * @param[out] pErr points to the block of error data.
- * @param[in] blockSize number of samples to process.
- */
- void arm_lms_q31(
- const arm_lms_instance_q31 * S,
- q31_t * pSrc,
- q31_t * pRef,
- q31_t * pOut,
- q31_t * pErr,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for Q31 LMS filter.
- * @param[in] S points to an instance of the Q31 LMS filter structure.
- * @param[in] numTaps number of filter coefficients.
- * @param[in] pCoeffs points to coefficient buffer.
- * @param[in] pState points to state buffer.
- * @param[in] mu step size that controls filter coefficient updates.
- * @param[in] blockSize number of samples to process.
- * @param[in] postShift bit shift applied to coefficients.
- */
- void arm_lms_init_q31(
- arm_lms_instance_q31 * S,
- uint16_t numTaps,
- q31_t * pCoeffs,
- q31_t * pState,
- q31_t mu,
- uint32_t blockSize,
- uint32_t postShift);
-
-
- /**
- * @brief Instance structure for the floating-point normalized LMS filter.
- */
- typedef struct
- {
- uint16_t numTaps; /**< number of coefficients in the filter. */
- float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
- float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
- float32_t mu; /**< step size that control filter coefficient updates. */
- float32_t energy; /**< saves previous frame energy. */
- float32_t x0; /**< saves previous input sample. */
- } arm_lms_norm_instance_f32;
-
-
- /**
- * @brief Processing function for floating-point normalized LMS filter.
- * @param[in] S points to an instance of the floating-point normalized LMS filter structure.
- * @param[in] pSrc points to the block of input data.
- * @param[in] pRef points to the block of reference data.
- * @param[out] pOut points to the block of output data.
- * @param[out] pErr points to the block of error data.
- * @param[in] blockSize number of samples to process.
- */
- void arm_lms_norm_f32(
- arm_lms_norm_instance_f32 * S,
- float32_t * pSrc,
- float32_t * pRef,
- float32_t * pOut,
- float32_t * pErr,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for floating-point normalized LMS filter.
- * @param[in] S points to an instance of the floating-point LMS filter structure.
- * @param[in] numTaps number of filter coefficients.
- * @param[in] pCoeffs points to coefficient buffer.
- * @param[in] pState points to state buffer.
- * @param[in] mu step size that controls filter coefficient updates.
- * @param[in] blockSize number of samples to process.
- */
- void arm_lms_norm_init_f32(
- arm_lms_norm_instance_f32 * S,
- uint16_t numTaps,
- float32_t * pCoeffs,
- float32_t * pState,
- float32_t mu,
- uint32_t blockSize);
-
-
- /**
- * @brief Instance structure for the Q31 normalized LMS filter.
- */
- typedef struct
- {
- uint16_t numTaps; /**< number of coefficients in the filter. */
- q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
- q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
- q31_t mu; /**< step size that controls filter coefficient updates. */
- uint8_t postShift; /**< bit shift applied to coefficients. */
- q31_t *recipTable; /**< points to the reciprocal initial value table. */
- q31_t energy; /**< saves previous frame energy. */
- q31_t x0; /**< saves previous input sample. */
- } arm_lms_norm_instance_q31;
-
-
- /**
- * @brief Processing function for Q31 normalized LMS filter.
- * @param[in] S points to an instance of the Q31 normalized LMS filter structure.
- * @param[in] pSrc points to the block of input data.
- * @param[in] pRef points to the block of reference data.
- * @param[out] pOut points to the block of output data.
- * @param[out] pErr points to the block of error data.
- * @param[in] blockSize number of samples to process.
- */
- void arm_lms_norm_q31(
- arm_lms_norm_instance_q31 * S,
- q31_t * pSrc,
- q31_t * pRef,
- q31_t * pOut,
- q31_t * pErr,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for Q31 normalized LMS filter.
- * @param[in] S points to an instance of the Q31 normalized LMS filter structure.
- * @param[in] numTaps number of filter coefficients.
- * @param[in] pCoeffs points to coefficient buffer.
- * @param[in] pState points to state buffer.
- * @param[in] mu step size that controls filter coefficient updates.
- * @param[in] blockSize number of samples to process.
- * @param[in] postShift bit shift applied to coefficients.
- */
- void arm_lms_norm_init_q31(
- arm_lms_norm_instance_q31 * S,
- uint16_t numTaps,
- q31_t * pCoeffs,
- q31_t * pState,
- q31_t mu,
- uint32_t blockSize,
- uint8_t postShift);
-
-
- /**
- * @brief Instance structure for the Q15 normalized LMS filter.
- */
- typedef struct
- {
- uint16_t numTaps; /**< Number of coefficients in the filter. */
- q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
- q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */
- q15_t mu; /**< step size that controls filter coefficient updates. */
- uint8_t postShift; /**< bit shift applied to coefficients. */
- q15_t *recipTable; /**< Points to the reciprocal initial value table. */
- q15_t energy; /**< saves previous frame energy. */
- q15_t x0; /**< saves previous input sample. */
- } arm_lms_norm_instance_q15;
-
-
- /**
- * @brief Processing function for Q15 normalized LMS filter.
- * @param[in] S points to an instance of the Q15 normalized LMS filter structure.
- * @param[in] pSrc points to the block of input data.
- * @param[in] pRef points to the block of reference data.
- * @param[out] pOut points to the block of output data.
- * @param[out] pErr points to the block of error data.
- * @param[in] blockSize number of samples to process.
- */
- void arm_lms_norm_q15(
- arm_lms_norm_instance_q15 * S,
- q15_t * pSrc,
- q15_t * pRef,
- q15_t * pOut,
- q15_t * pErr,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for Q15 normalized LMS filter.
- * @param[in] S points to an instance of the Q15 normalized LMS filter structure.
- * @param[in] numTaps number of filter coefficients.
- * @param[in] pCoeffs points to coefficient buffer.
- * @param[in] pState points to state buffer.
- * @param[in] mu step size that controls filter coefficient updates.
- * @param[in] blockSize number of samples to process.
- * @param[in] postShift bit shift applied to coefficients.
- */
- void arm_lms_norm_init_q15(
- arm_lms_norm_instance_q15 * S,
- uint16_t numTaps,
- q15_t * pCoeffs,
- q15_t * pState,
- q15_t mu,
- uint32_t blockSize,
- uint8_t postShift);
-
-
- /**
- * @brief Correlation of floating-point sequences.
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
- */
- void arm_correlate_f32(
- float32_t * pSrcA,
- uint32_t srcALen,
- float32_t * pSrcB,
- uint32_t srcBLen,
- float32_t * pDst);
-
-
- /**
- * @brief Correlation of Q15 sequences
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
- * @param[in] pScratch points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- */
- void arm_correlate_opt_q15(
- q15_t * pSrcA,
- uint32_t srcALen,
- q15_t * pSrcB,
- uint32_t srcBLen,
- q15_t * pDst,
- q15_t * pScratch);
-
-
- /**
- * @brief Correlation of Q15 sequences.
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
- */
-
- void arm_correlate_q15(
- q15_t * pSrcA,
- uint32_t srcALen,
- q15_t * pSrcB,
- uint32_t srcBLen,
- q15_t * pDst);
-
-
- /**
- * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4.
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
- */
-
- void arm_correlate_fast_q15(
- q15_t * pSrcA,
- uint32_t srcALen,
- q15_t * pSrcB,
- uint32_t srcBLen,
- q15_t * pDst);
-
-
- /**
- * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4.
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
- * @param[in] pScratch points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- */
- void arm_correlate_fast_opt_q15(
- q15_t * pSrcA,
- uint32_t srcALen,
- q15_t * pSrcB,
- uint32_t srcBLen,
- q15_t * pDst,
- q15_t * pScratch);
-
-
- /**
- * @brief Correlation of Q31 sequences.
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
- */
- void arm_correlate_q31(
- q31_t * pSrcA,
- uint32_t srcALen,
- q31_t * pSrcB,
- uint32_t srcBLen,
- q31_t * pDst);
-
-
- /**
- * @brief Correlation of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
- */
- void arm_correlate_fast_q31(
- q31_t * pSrcA,
- uint32_t srcALen,
- q31_t * pSrcB,
- uint32_t srcBLen,
- q31_t * pDst);
-
-
- /**
- * @brief Correlation of Q7 sequences.
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
- * @param[in] pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
- * @param[in] pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
- */
- void arm_correlate_opt_q7(
- q7_t * pSrcA,
- uint32_t srcALen,
- q7_t * pSrcB,
- uint32_t srcBLen,
- q7_t * pDst,
- q15_t * pScratch1,
- q15_t * pScratch2);
-
-
- /**
- * @brief Correlation of Q7 sequences.
- * @param[in] pSrcA points to the first input sequence.
- * @param[in] srcALen length of the first input sequence.
- * @param[in] pSrcB points to the second input sequence.
- * @param[in] srcBLen length of the second input sequence.
- * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1.
- */
- void arm_correlate_q7(
- q7_t * pSrcA,
- uint32_t srcALen,
- q7_t * pSrcB,
- uint32_t srcBLen,
- q7_t * pDst);
-
-
- /**
- * @brief Instance structure for the floating-point sparse FIR filter.
- */
- typedef struct
- {
- uint16_t numTaps; /**< number of coefficients in the filter. */
- uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
- float32_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
- float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
- uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
- int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
- } arm_fir_sparse_instance_f32;
-
- /**
- * @brief Instance structure for the Q31 sparse FIR filter.
- */
- typedef struct
- {
- uint16_t numTaps; /**< number of coefficients in the filter. */
- uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
- q31_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
- q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
- uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
- int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
- } arm_fir_sparse_instance_q31;
-
- /**
- * @brief Instance structure for the Q15 sparse FIR filter.
- */
- typedef struct
- {
- uint16_t numTaps; /**< number of coefficients in the filter. */
- uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
- q15_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
- q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
- uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
- int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
- } arm_fir_sparse_instance_q15;
-
- /**
- * @brief Instance structure for the Q7 sparse FIR filter.
- */
- typedef struct
- {
- uint16_t numTaps; /**< number of coefficients in the filter. */
- uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */
- q7_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
- q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/
- uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */
- int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */
- } arm_fir_sparse_instance_q7;
-
-
- /**
- * @brief Processing function for the floating-point sparse FIR filter.
- * @param[in] S points to an instance of the floating-point sparse FIR structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data
- * @param[in] pScratchIn points to a temporary buffer of size blockSize.
- * @param[in] blockSize number of input samples to process per call.
- */
- void arm_fir_sparse_f32(
- arm_fir_sparse_instance_f32 * S,
- float32_t * pSrc,
- float32_t * pDst,
- float32_t * pScratchIn,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the floating-point sparse FIR filter.
- * @param[in,out] S points to an instance of the floating-point sparse FIR structure.
- * @param[in] numTaps number of nonzero coefficients in the filter.
- * @param[in] pCoeffs points to the array of filter coefficients.
- * @param[in] pState points to the state buffer.
- * @param[in] pTapDelay points to the array of offset times.
- * @param[in] maxDelay maximum offset time supported.
- * @param[in] blockSize number of samples that will be processed per block.
- */
- void arm_fir_sparse_init_f32(
- arm_fir_sparse_instance_f32 * S,
- uint16_t numTaps,
- float32_t * pCoeffs,
- float32_t * pState,
- int32_t * pTapDelay,
- uint16_t maxDelay,
- uint32_t blockSize);
-
-
- /**
- * @brief Processing function for the Q31 sparse FIR filter.
- * @param[in] S points to an instance of the Q31 sparse FIR structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data
- * @param[in] pScratchIn points to a temporary buffer of size blockSize.
- * @param[in] blockSize number of input samples to process per call.
- */
- void arm_fir_sparse_q31(
- arm_fir_sparse_instance_q31 * S,
- q31_t * pSrc,
- q31_t * pDst,
- q31_t * pScratchIn,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the Q31 sparse FIR filter.
- * @param[in,out] S points to an instance of the Q31 sparse FIR structure.
- * @param[in] numTaps number of nonzero coefficients in the filter.
- * @param[in] pCoeffs points to the array of filter coefficients.
- * @param[in] pState points to the state buffer.
- * @param[in] pTapDelay points to the array of offset times.
- * @param[in] maxDelay maximum offset time supported.
- * @param[in] blockSize number of samples that will be processed per block.
- */
- void arm_fir_sparse_init_q31(
- arm_fir_sparse_instance_q31 * S,
- uint16_t numTaps,
- q31_t * pCoeffs,
- q31_t * pState,
- int32_t * pTapDelay,
- uint16_t maxDelay,
- uint32_t blockSize);
-
-
- /**
- * @brief Processing function for the Q15 sparse FIR filter.
- * @param[in] S points to an instance of the Q15 sparse FIR structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data
- * @param[in] pScratchIn points to a temporary buffer of size blockSize.
- * @param[in] pScratchOut points to a temporary buffer of size blockSize.
- * @param[in] blockSize number of input samples to process per call.
- */
- void arm_fir_sparse_q15(
- arm_fir_sparse_instance_q15 * S,
- q15_t * pSrc,
- q15_t * pDst,
- q15_t * pScratchIn,
- q31_t * pScratchOut,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the Q15 sparse FIR filter.
- * @param[in,out] S points to an instance of the Q15 sparse FIR structure.
- * @param[in] numTaps number of nonzero coefficients in the filter.
- * @param[in] pCoeffs points to the array of filter coefficients.
- * @param[in] pState points to the state buffer.
- * @param[in] pTapDelay points to the array of offset times.
- * @param[in] maxDelay maximum offset time supported.
- * @param[in] blockSize number of samples that will be processed per block.
- */
- void arm_fir_sparse_init_q15(
- arm_fir_sparse_instance_q15 * S,
- uint16_t numTaps,
- q15_t * pCoeffs,
- q15_t * pState,
- int32_t * pTapDelay,
- uint16_t maxDelay,
- uint32_t blockSize);
-
-
- /**
- * @brief Processing function for the Q7 sparse FIR filter.
- * @param[in] S points to an instance of the Q7 sparse FIR structure.
- * @param[in] pSrc points to the block of input data.
- * @param[out] pDst points to the block of output data
- * @param[in] pScratchIn points to a temporary buffer of size blockSize.
- * @param[in] pScratchOut points to a temporary buffer of size blockSize.
- * @param[in] blockSize number of input samples to process per call.
- */
- void arm_fir_sparse_q7(
- arm_fir_sparse_instance_q7 * S,
- q7_t * pSrc,
- q7_t * pDst,
- q7_t * pScratchIn,
- q31_t * pScratchOut,
- uint32_t blockSize);
-
-
- /**
- * @brief Initialization function for the Q7 sparse FIR filter.
- * @param[in,out] S points to an instance of the Q7 sparse FIR structure.
- * @param[in] numTaps number of nonzero coefficients in the filter.
- * @param[in] pCoeffs points to the array of filter coefficients.
- * @param[in] pState points to the state buffer.
- * @param[in] pTapDelay points to the array of offset times.
- * @param[in] maxDelay maximum offset time supported.
- * @param[in] blockSize number of samples that will be processed per block.
- */
- void arm_fir_sparse_init_q7(
- arm_fir_sparse_instance_q7 * S,
- uint16_t numTaps,
- q7_t * pCoeffs,
- q7_t * pState,
- int32_t * pTapDelay,
- uint16_t maxDelay,
- uint32_t blockSize);
-
-
- /**
- * @brief Floating-point sin_cos function.
- * @param[in] theta input value in degrees
- * @param[out] pSinVal points to the processed sine output.
- * @param[out] pCosVal points to the processed cos output.
- */
- void arm_sin_cos_f32(
- float32_t theta,
- float32_t * pSinVal,
- float32_t * pCosVal);
-
-
- /**
- * @brief Q31 sin_cos function.
- * @param[in] theta scaled input value in degrees
- * @param[out] pSinVal points to the processed sine output.
- * @param[out] pCosVal points to the processed cosine output.
- */
- void arm_sin_cos_q31(
- q31_t theta,
- q31_t * pSinVal,
- q31_t * pCosVal);
-
-
- /**
- * @brief Floating-point complex conjugate.
- * @param[in] pSrc points to the input vector
- * @param[out] pDst points to the output vector
- * @param[in] numSamples number of complex samples in each vector
- */
- void arm_cmplx_conj_f32(
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t numSamples);
-
- /**
- * @brief Q31 complex conjugate.
- * @param[in] pSrc points to the input vector
- * @param[out] pDst points to the output vector
- * @param[in] numSamples number of complex samples in each vector
- */
- void arm_cmplx_conj_q31(
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t numSamples);
-
-
- /**
- * @brief Q15 complex conjugate.
- * @param[in] pSrc points to the input vector
- * @param[out] pDst points to the output vector
- * @param[in] numSamples number of complex samples in each vector
- */
- void arm_cmplx_conj_q15(
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t numSamples);
-
-
- /**
- * @brief Floating-point complex magnitude squared
- * @param[in] pSrc points to the complex input vector
- * @param[out] pDst points to the real output vector
- * @param[in] numSamples number of complex samples in the input vector
- */
- void arm_cmplx_mag_squared_f32(
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t numSamples);
-
-
- /**
- * @brief Q31 complex magnitude squared
- * @param[in] pSrc points to the complex input vector
- * @param[out] pDst points to the real output vector
- * @param[in] numSamples number of complex samples in the input vector
- */
- void arm_cmplx_mag_squared_q31(
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t numSamples);
-
-
- /**
- * @brief Q15 complex magnitude squared
- * @param[in] pSrc points to the complex input vector
- * @param[out] pDst points to the real output vector
- * @param[in] numSamples number of complex samples in the input vector
- */
- void arm_cmplx_mag_squared_q15(
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t numSamples);
-
-
- /**
- * @ingroup groupController
- */
-
- /**
- * @defgroup PID PID Motor Control
- *
- * A Proportional Integral Derivative (PID) controller is a generic feedback control
- * loop mechanism widely used in industrial control systems.
- * A PID controller is the most commonly used type of feedback controller.
- *
- * This set of functions implements (PID) controllers
- * for Q15, Q31, and floating-point data types. The functions operate on a single sample
- * of data and each call to the function returns a single processed value.
- * <code>S</code> points to an instance of the PID control data structure. <code>in</code>
- * is the input sample value. The functions return the output value.
- *
- * \par Algorithm:
- * <pre>
- * y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2]
- * A0 = Kp + Ki + Kd
- * A1 = (-Kp ) - (2 * Kd )
- * A2 = Kd </pre>
- *
- * \par
- * where \c Kp is proportional constant, \c Ki is Integral constant and \c Kd is Derivative constant
- *
- * \par
- * \image html PID.gif "Proportional Integral Derivative Controller"
- *
- * \par
- * The PID controller calculates an "error" value as the difference between
- * the measured output and the reference input.
- * The controller attempts to minimize the error by adjusting the process control inputs.
- * The proportional value determines the reaction to the current error,
- * the integral value determines the reaction based on the sum of recent errors,
- * and the derivative value determines the reaction based on the rate at which the error has been changing.
- *
- * \par Instance Structure
- * The Gains A0, A1, A2 and state variables for a PID controller are stored together in an instance data structure.
- * A separate instance structure must be defined for each PID Controller.
- * There are separate instance structure declarations for each of the 3 supported data types.
- *
- * \par Reset Functions
- * There is also an associated reset function for each data type which clears the state array.
- *
- * \par Initialization Functions
- * There is also an associated initialization function for each data type.
- * The initialization function performs the following operations:
- * - Initializes the Gains A0, A1, A2 from Kp,Ki, Kd gains.
- * - Zeros out the values in the state buffer.
- *
- * \par
- * Instance structure cannot be placed into a const data section and it is recommended to use the initialization function.
- *
- * \par Fixed-Point Behavior
- * Care must be taken when using the fixed-point versions of the PID Controller functions.
- * In particular, the overflow and saturation behavior of the accumulator used in each function must be considered.
- * Refer to the function specific documentation below for usage guidelines.
- */
-
- /**
- * @addtogroup PID
- * @{
- */
-
- /**
- * @brief Process function for the floating-point PID Control.
- * @param[in,out] S is an instance of the floating-point PID Control structure
- * @param[in] in input sample to process
- * @return out processed output sample.
- */
- static __INLINE float32_t arm_pid_f32(
- arm_pid_instance_f32 * S,
- float32_t in)
- {
- float32_t out;
-
- /* y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2] */
- out = (S->A0 * in) +
- (S->A1 * S->state[0]) + (S->A2 * S->state[1]) + (S->state[2]);
-
- /* Update state */
- S->state[1] = S->state[0];
- S->state[0] = in;
- S->state[2] = out;
-
- /* return to application */
- return (out);
-
- }
-
- /**
- * @brief Process function for the Q31 PID Control.
- * @param[in,out] S points to an instance of the Q31 PID Control structure
- * @param[in] in input sample to process
- * @return out processed output sample.
- *
- * <b>Scaling and Overflow Behavior:</b>
- * \par
- * The function is implemented using an internal 64-bit accumulator.
- * The accumulator has a 2.62 format and maintains full precision of the intermediate multiplication results but provides only a single guard bit.
- * Thus, if the accumulator result overflows it wraps around rather than clip.
- * In order to avoid overflows completely the input signal must be scaled down by 2 bits as there are four additions.
- * After all multiply-accumulates are performed, the 2.62 accumulator is truncated to 1.32 format and then saturated to 1.31 format.
- */
- static __INLINE q31_t arm_pid_q31(
- arm_pid_instance_q31 * S,
- q31_t in)
- {
- q63_t acc;
- q31_t out;
-
- /* acc = A0 * x[n] */
- acc = (q63_t) S->A0 * in;
-
- /* acc += A1 * x[n-1] */
- acc += (q63_t) S->A1 * S->state[0];
-
- /* acc += A2 * x[n-2] */
- acc += (q63_t) S->A2 * S->state[1];
-
- /* convert output to 1.31 format to add y[n-1] */
- out = (q31_t) (acc >> 31u);
-
- /* out += y[n-1] */
- out += S->state[2];
-
- /* Update state */
- S->state[1] = S->state[0];
- S->state[0] = in;
- S->state[2] = out;
-
- /* return to application */
- return (out);
- }
-
-
- /**
- * @brief Process function for the Q15 PID Control.
- * @param[in,out] S points to an instance of the Q15 PID Control structure
- * @param[in] in input sample to process
- * @return out processed output sample.
- *
- * <b>Scaling and Overflow Behavior:</b>
- * \par
- * The function is implemented using a 64-bit internal accumulator.
- * Both Gains and state variables are represented in 1.15 format and multiplications yield a 2.30 result.
- * The 2.30 intermediate results are accumulated in a 64-bit accumulator in 34.30 format.
- * There is no risk of internal overflow with this approach and the full precision of intermediate multiplications is preserved.
- * After all additions have been performed, the accumulator is truncated to 34.15 format by discarding low 15 bits.
- * Lastly, the accumulator is saturated to yield a result in 1.15 format.
- */
- static __INLINE q15_t arm_pid_q15(
- arm_pid_instance_q15 * S,
- q15_t in)
- {
- q63_t acc;
- q15_t out;
-
-#ifndef ARM_MATH_CM0_FAMILY
- __SIMD32_TYPE *vstate;
-
- /* Implementation of PID controller */
-
- /* acc = A0 * x[n] */
- acc = (q31_t) __SMUAD((uint32_t)S->A0, (uint32_t)in);
-
- /* acc += A1 * x[n-1] + A2 * x[n-2] */
- vstate = __SIMD32_CONST(S->state);
- acc = (q63_t)__SMLALD((uint32_t)S->A1, (uint32_t)*vstate, (uint64_t)acc);
-#else
- /* acc = A0 * x[n] */
- acc = ((q31_t) S->A0) * in;
-
- /* acc += A1 * x[n-1] + A2 * x[n-2] */
- acc += (q31_t) S->A1 * S->state[0];
- acc += (q31_t) S->A2 * S->state[1];
-#endif
-
- /* acc += y[n-1] */
- acc += (q31_t) S->state[2] << 15;
-
- /* saturate the output */
- out = (q15_t) (__SSAT((acc >> 15), 16));
-
- /* Update state */
- S->state[1] = S->state[0];
- S->state[0] = in;
- S->state[2] = out;
-
- /* return to application */
- return (out);
- }
-
- /**
- * @} end of PID group
- */
-
-
- /**
- * @brief Floating-point matrix inverse.
- * @param[in] src points to the instance of the input floating-point matrix structure.
- * @param[out] dst points to the instance of the output floating-point matrix structure.
- * @return The function returns ARM_MATH_SIZE_MISMATCH, if the dimensions do not match.
- * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR.
- */
- arm_status arm_mat_inverse_f32(
- const arm_matrix_instance_f32 * src,
- arm_matrix_instance_f32 * dst);
-
-
- /**
- * @brief Floating-point matrix inverse.
- * @param[in] src points to the instance of the input floating-point matrix structure.
- * @param[out] dst points to the instance of the output floating-point matrix structure.
- * @return The function returns ARM_MATH_SIZE_MISMATCH, if the dimensions do not match.
- * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR.
- */
- arm_status arm_mat_inverse_f64(
- const arm_matrix_instance_f64 * src,
- arm_matrix_instance_f64 * dst);
-
-
-
- /**
- * @ingroup groupController
- */
-
- /**
- * @defgroup clarke Vector Clarke Transform
- * Forward Clarke transform converts the instantaneous stator phases into a two-coordinate time invariant vector.
- * Generally the Clarke transform uses three-phase currents <code>Ia, Ib and Ic</code> to calculate currents
- * in the two-phase orthogonal stator axis <code>Ialpha</code> and <code>Ibeta</code>.
- * When <code>Ialpha</code> is superposed with <code>Ia</code> as shown in the figure below
- * \image html clarke.gif Stator current space vector and its components in (a,b).
- * and <code>Ia + Ib + Ic = 0</code>, in this condition <code>Ialpha</code> and <code>Ibeta</code>
- * can be calculated using only <code>Ia</code> and <code>Ib</code>.
- *
- * The function operates on a single sample of data and each call to the function returns the processed output.
- * The library provides separate functions for Q31 and floating-point data types.
- * \par Algorithm
- * \image html clarkeFormula.gif
- * where <code>Ia</code> and <code>Ib</code> are the instantaneous stator phases and
- * <code>pIalpha</code> and <code>pIbeta</code> are the two coordinates of time invariant vector.
- * \par Fixed-Point Behavior
- * Care must be taken when using the Q31 version of the Clarke transform.
- * In particular, the overflow and saturation behavior of the accumulator used must be considered.
- * Refer to the function specific documentation below for usage guidelines.
- */
-
- /**
- * @addtogroup clarke
- * @{
- */
-
- /**
- *
- * @brief Floating-point Clarke transform
- * @param[in] Ia input three-phase coordinate <code>a</code>
- * @param[in] Ib input three-phase coordinate <code>b</code>
- * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha
- * @param[out] pIbeta points to output two-phase orthogonal vector axis beta
- */
- static __INLINE void arm_clarke_f32(
- float32_t Ia,
- float32_t Ib,
- float32_t * pIalpha,
- float32_t * pIbeta)
- {
- /* Calculate pIalpha using the equation, pIalpha = Ia */
- *pIalpha = Ia;
-
- /* Calculate pIbeta using the equation, pIbeta = (1/sqrt(3)) * Ia + (2/sqrt(3)) * Ib */
- *pIbeta = ((float32_t) 0.57735026919 * Ia + (float32_t) 1.15470053838 * Ib);
- }
-
-
- /**
- * @brief Clarke transform for Q31 version
- * @param[in] Ia input three-phase coordinate <code>a</code>
- * @param[in] Ib input three-phase coordinate <code>b</code>
- * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha
- * @param[out] pIbeta points to output two-phase orthogonal vector axis beta
- *
- * <b>Scaling and Overflow Behavior:</b>
- * \par
- * The function is implemented using an internal 32-bit accumulator.
- * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
- * There is saturation on the addition, hence there is no risk of overflow.
- */
- static __INLINE void arm_clarke_q31(
- q31_t Ia,
- q31_t Ib,
- q31_t * pIalpha,
- q31_t * pIbeta)
- {
- q31_t product1, product2; /* Temporary variables used to store intermediate results */
-
- /* Calculating pIalpha from Ia by equation pIalpha = Ia */
- *pIalpha = Ia;
-
- /* Intermediate product is calculated by (1/(sqrt(3)) * Ia) */
- product1 = (q31_t) (((q63_t) Ia * 0x24F34E8B) >> 30);
-
- /* Intermediate product is calculated by (2/sqrt(3) * Ib) */
- product2 = (q31_t) (((q63_t) Ib * 0x49E69D16) >> 30);
-
- /* pIbeta is calculated by adding the intermediate products */
- *pIbeta = __QADD(product1, product2);
- }
-
- /**
- * @} end of clarke group
- */
-
- /**
- * @brief Converts the elements of the Q7 vector to Q31 vector.
- * @param[in] pSrc input pointer
- * @param[out] pDst output pointer
- * @param[in] blockSize number of samples to process
- */
- void arm_q7_to_q31(
- q7_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
-
-
- /**
- * @ingroup groupController
- */
-
- /**
- * @defgroup inv_clarke Vector Inverse Clarke Transform
- * Inverse Clarke transform converts the two-coordinate time invariant vector into instantaneous stator phases.
- *
- * The function operates on a single sample of data and each call to the function returns the processed output.
- * The library provides separate functions for Q31 and floating-point data types.
- * \par Algorithm
- * \image html clarkeInvFormula.gif
- * where <code>pIa</code> and <code>pIb</code> are the instantaneous stator phases and
- * <code>Ialpha</code> and <code>Ibeta</code> are the two coordinates of time invariant vector.
- * \par Fixed-Point Behavior
- * Care must be taken when using the Q31 version of the Clarke transform.
- * In particular, the overflow and saturation behavior of the accumulator used must be considered.
- * Refer to the function specific documentation below for usage guidelines.
- */
-
- /**
- * @addtogroup inv_clarke
- * @{
- */
-
- /**
- * @brief Floating-point Inverse Clarke transform
- * @param[in] Ialpha input two-phase orthogonal vector axis alpha
- * @param[in] Ibeta input two-phase orthogonal vector axis beta
- * @param[out] pIa points to output three-phase coordinate <code>a</code>
- * @param[out] pIb points to output three-phase coordinate <code>b</code>
- */
- static __INLINE void arm_inv_clarke_f32(
- float32_t Ialpha,
- float32_t Ibeta,
- float32_t * pIa,
- float32_t * pIb)
- {
- /* Calculating pIa from Ialpha by equation pIa = Ialpha */
- *pIa = Ialpha;
-
- /* Calculating pIb from Ialpha and Ibeta by equation pIb = -(1/2) * Ialpha + (sqrt(3)/2) * Ibeta */
- *pIb = -0.5f * Ialpha + 0.8660254039f * Ibeta;
- }
-
-
- /**
- * @brief Inverse Clarke transform for Q31 version
- * @param[in] Ialpha input two-phase orthogonal vector axis alpha
- * @param[in] Ibeta input two-phase orthogonal vector axis beta
- * @param[out] pIa points to output three-phase coordinate <code>a</code>
- * @param[out] pIb points to output three-phase coordinate <code>b</code>
- *
- * <b>Scaling and Overflow Behavior:</b>
- * \par
- * The function is implemented using an internal 32-bit accumulator.
- * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
- * There is saturation on the subtraction, hence there is no risk of overflow.
- */
- static __INLINE void arm_inv_clarke_q31(
- q31_t Ialpha,
- q31_t Ibeta,
- q31_t * pIa,
- q31_t * pIb)
- {
- q31_t product1, product2; /* Temporary variables used to store intermediate results */
-
- /* Calculating pIa from Ialpha by equation pIa = Ialpha */
- *pIa = Ialpha;
-
- /* Intermediate product is calculated by (1/(2*sqrt(3)) * Ia) */
- product1 = (q31_t) (((q63_t) (Ialpha) * (0x40000000)) >> 31);
-
- /* Intermediate product is calculated by (1/sqrt(3) * pIb) */
- product2 = (q31_t) (((q63_t) (Ibeta) * (0x6ED9EBA1)) >> 31);
-
- /* pIb is calculated by subtracting the products */
- *pIb = __QSUB(product2, product1);
- }
-
- /**
- * @} end of inv_clarke group
- */
-
- /**
- * @brief Converts the elements of the Q7 vector to Q15 vector.
- * @param[in] pSrc input pointer
- * @param[out] pDst output pointer
- * @param[in] blockSize number of samples to process
- */
- void arm_q7_to_q15(
- q7_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
-
-
- /**
- * @ingroup groupController
- */
-
- /**
- * @defgroup park Vector Park Transform
- *
- * Forward Park transform converts the input two-coordinate vector to flux and torque components.
- * The Park transform can be used to realize the transformation of the <code>Ialpha</code> and the <code>Ibeta</code> currents
- * from the stationary to the moving reference frame and control the spatial relationship between
- * the stator vector current and rotor flux vector.
- * If we consider the d axis aligned with the rotor flux, the diagram below shows the
- * current vector and the relationship from the two reference frames:
- * \image html park.gif "Stator current space vector and its component in (a,b) and in the d,q rotating reference frame"
- *
- * The function operates on a single sample of data and each call to the function returns the processed output.
- * The library provides separate functions for Q31 and floating-point data types.
- * \par Algorithm
- * \image html parkFormula.gif
- * where <code>Ialpha</code> and <code>Ibeta</code> are the stator vector components,
- * <code>pId</code> and <code>pIq</code> are rotor vector components and <code>cosVal</code> and <code>sinVal</code> are the
- * cosine and sine values of theta (rotor flux position).
- * \par Fixed-Point Behavior
- * Care must be taken when using the Q31 version of the Park transform.
- * In particular, the overflow and saturation behavior of the accumulator used must be considered.
- * Refer to the function specific documentation below for usage guidelines.
- */
-
- /**
- * @addtogroup park
- * @{
- */
-
- /**
- * @brief Floating-point Park transform
- * @param[in] Ialpha input two-phase vector coordinate alpha
- * @param[in] Ibeta input two-phase vector coordinate beta
- * @param[out] pId points to output rotor reference frame d
- * @param[out] pIq points to output rotor reference frame q
- * @param[in] sinVal sine value of rotation angle theta
- * @param[in] cosVal cosine value of rotation angle theta
- *
- * The function implements the forward Park transform.
- *
- */
- static __INLINE void arm_park_f32(
- float32_t Ialpha,
- float32_t Ibeta,
- float32_t * pId,
- float32_t * pIq,
- float32_t sinVal,
- float32_t cosVal)
- {
- /* Calculate pId using the equation, pId = Ialpha * cosVal + Ibeta * sinVal */
- *pId = Ialpha * cosVal + Ibeta * sinVal;
-
- /* Calculate pIq using the equation, pIq = - Ialpha * sinVal + Ibeta * cosVal */
- *pIq = -Ialpha * sinVal + Ibeta * cosVal;
- }
-
-
- /**
- * @brief Park transform for Q31 version
- * @param[in] Ialpha input two-phase vector coordinate alpha
- * @param[in] Ibeta input two-phase vector coordinate beta
- * @param[out] pId points to output rotor reference frame d
- * @param[out] pIq points to output rotor reference frame q
- * @param[in] sinVal sine value of rotation angle theta
- * @param[in] cosVal cosine value of rotation angle theta
- *
- * <b>Scaling and Overflow Behavior:</b>
- * \par
- * The function is implemented using an internal 32-bit accumulator.
- * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
- * There is saturation on the addition and subtraction, hence there is no risk of overflow.
- */
- static __INLINE void arm_park_q31(
- q31_t Ialpha,
- q31_t Ibeta,
- q31_t * pId,
- q31_t * pIq,
- q31_t sinVal,
- q31_t cosVal)
- {
- q31_t product1, product2; /* Temporary variables used to store intermediate results */
- q31_t product3, product4; /* Temporary variables used to store intermediate results */
-
- /* Intermediate product is calculated by (Ialpha * cosVal) */
- product1 = (q31_t) (((q63_t) (Ialpha) * (cosVal)) >> 31);
-
- /* Intermediate product is calculated by (Ibeta * sinVal) */
- product2 = (q31_t) (((q63_t) (Ibeta) * (sinVal)) >> 31);
-
-
- /* Intermediate product is calculated by (Ialpha * sinVal) */
- product3 = (q31_t) (((q63_t) (Ialpha) * (sinVal)) >> 31);
-
- /* Intermediate product is calculated by (Ibeta * cosVal) */
- product4 = (q31_t) (((q63_t) (Ibeta) * (cosVal)) >> 31);
-
- /* Calculate pId by adding the two intermediate products 1 and 2 */
- *pId = __QADD(product1, product2);
-
- /* Calculate pIq by subtracting the two intermediate products 3 from 4 */
- *pIq = __QSUB(product4, product3);
- }
-
- /**
- * @} end of park group
- */
-
- /**
- * @brief Converts the elements of the Q7 vector to floating-point vector.
- * @param[in] pSrc is input pointer
- * @param[out] pDst is output pointer
- * @param[in] blockSize is the number of samples to process
- */
- void arm_q7_to_float(
- q7_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @ingroup groupController
- */
-
- /**
- * @defgroup inv_park Vector Inverse Park transform
- * Inverse Park transform converts the input flux and torque components to two-coordinate vector.
- *
- * The function operates on a single sample of data and each call to the function returns the processed output.
- * The library provides separate functions for Q31 and floating-point data types.
- * \par Algorithm
- * \image html parkInvFormula.gif
- * where <code>pIalpha</code> and <code>pIbeta</code> are the stator vector components,
- * <code>Id</code> and <code>Iq</code> are rotor vector components and <code>cosVal</code> and <code>sinVal</code> are the
- * cosine and sine values of theta (rotor flux position).
- * \par Fixed-Point Behavior
- * Care must be taken when using the Q31 version of the Park transform.
- * In particular, the overflow and saturation behavior of the accumulator used must be considered.
- * Refer to the function specific documentation below for usage guidelines.
- */
-
- /**
- * @addtogroup inv_park
- * @{
- */
-
- /**
- * @brief Floating-point Inverse Park transform
- * @param[in] Id input coordinate of rotor reference frame d
- * @param[in] Iq input coordinate of rotor reference frame q
- * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha
- * @param[out] pIbeta points to output two-phase orthogonal vector axis beta
- * @param[in] sinVal sine value of rotation angle theta
- * @param[in] cosVal cosine value of rotation angle theta
- */
- static __INLINE void arm_inv_park_f32(
- float32_t Id,
- float32_t Iq,
- float32_t * pIalpha,
- float32_t * pIbeta,
- float32_t sinVal,
- float32_t cosVal)
- {
- /* Calculate pIalpha using the equation, pIalpha = Id * cosVal - Iq * sinVal */
- *pIalpha = Id * cosVal - Iq * sinVal;
-
- /* Calculate pIbeta using the equation, pIbeta = Id * sinVal + Iq * cosVal */
- *pIbeta = Id * sinVal + Iq * cosVal;
- }
-
-
- /**
- * @brief Inverse Park transform for Q31 version
- * @param[in] Id input coordinate of rotor reference frame d
- * @param[in] Iq input coordinate of rotor reference frame q
- * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha
- * @param[out] pIbeta points to output two-phase orthogonal vector axis beta
- * @param[in] sinVal sine value of rotation angle theta
- * @param[in] cosVal cosine value of rotation angle theta
- *
- * <b>Scaling and Overflow Behavior:</b>
- * \par
- * The function is implemented using an internal 32-bit accumulator.
- * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
- * There is saturation on the addition, hence there is no risk of overflow.
- */
- static __INLINE void arm_inv_park_q31(
- q31_t Id,
- q31_t Iq,
- q31_t * pIalpha,
- q31_t * pIbeta,
- q31_t sinVal,
- q31_t cosVal)
- {
- q31_t product1, product2; /* Temporary variables used to store intermediate results */
- q31_t product3, product4; /* Temporary variables used to store intermediate results */
-
- /* Intermediate product is calculated by (Id * cosVal) */
- product1 = (q31_t) (((q63_t) (Id) * (cosVal)) >> 31);
-
- /* Intermediate product is calculated by (Iq * sinVal) */
- product2 = (q31_t) (((q63_t) (Iq) * (sinVal)) >> 31);
-
-
- /* Intermediate product is calculated by (Id * sinVal) */
- product3 = (q31_t) (((q63_t) (Id) * (sinVal)) >> 31);
-
- /* Intermediate product is calculated by (Iq * cosVal) */
- product4 = (q31_t) (((q63_t) (Iq) * (cosVal)) >> 31);
-
- /* Calculate pIalpha by using the two intermediate products 1 and 2 */
- *pIalpha = __QSUB(product1, product2);
-
- /* Calculate pIbeta by using the two intermediate products 3 and 4 */
- *pIbeta = __QADD(product4, product3);
- }
-
- /**
- * @} end of Inverse park group
- */
-
-
- /**
- * @brief Converts the elements of the Q31 vector to floating-point vector.
- * @param[in] pSrc is input pointer
- * @param[out] pDst is output pointer
- * @param[in] blockSize is the number of samples to process
- */
- void arm_q31_to_float(
- q31_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
- /**
- * @ingroup groupInterpolation
- */
-
- /**
- * @defgroup LinearInterpolate Linear Interpolation
- *
- * Linear interpolation is a method of curve fitting using linear polynomials.
- * Linear interpolation works by effectively drawing a straight line between two neighboring samples and returning the appropriate point along that line
- *
- * \par
- * \image html LinearInterp.gif "Linear interpolation"
- *
- * \par
- * A Linear Interpolate function calculates an output value(y), for the input(x)
- * using linear interpolation of the input values x0, x1( nearest input values) and the output values y0 and y1(nearest output values)
- *
- * \par Algorithm:
- * <pre>
- * y = y0 + (x - x0) * ((y1 - y0)/(x1-x0))
- * where x0, x1 are nearest values of input x
- * y0, y1 are nearest values to output y
- * </pre>
- *
- * \par
- * This set of functions implements Linear interpolation process
- * for Q7, Q15, Q31, and floating-point data types. The functions operate on a single
- * sample of data and each call to the function returns a single processed value.
- * <code>S</code> points to an instance of the Linear Interpolate function data structure.
- * <code>x</code> is the input sample value. The functions returns the output value.
- *
- * \par
- * if x is outside of the table boundary, Linear interpolation returns first value of the table
- * if x is below input range and returns last value of table if x is above range.
- */
-
- /**
- * @addtogroup LinearInterpolate
- * @{
- */
-
- /**
- * @brief Process function for the floating-point Linear Interpolation Function.
- * @param[in,out] S is an instance of the floating-point Linear Interpolation structure
- * @param[in] x input sample to process
- * @return y processed output sample.
- *
- */
- static __INLINE float32_t arm_linear_interp_f32(
- arm_linear_interp_instance_f32 * S,
- float32_t x)
- {
- float32_t y;
- float32_t x0, x1; /* Nearest input values */
- float32_t y0, y1; /* Nearest output values */
- float32_t xSpacing = S->xSpacing; /* spacing between input values */
- int32_t i; /* Index variable */
- float32_t *pYData = S->pYData; /* pointer to output table */
-
- /* Calculation of index */
- i = (int32_t) ((x - S->x1) / xSpacing);
-
- if(i < 0)
- {
- /* Iniatilize output for below specified range as least output value of table */
- y = pYData[0];
- }
- else if((uint32_t)i >= S->nValues)
- {
- /* Iniatilize output for above specified range as last output value of table */
- y = pYData[S->nValues - 1];
- }
- else
- {
- /* Calculation of nearest input values */
- x0 = S->x1 + i * xSpacing;
- x1 = S->x1 + (i + 1) * xSpacing;
-
- /* Read of nearest output values */
- y0 = pYData[i];
- y1 = pYData[i + 1];
-
- /* Calculation of output */
- y = y0 + (x - x0) * ((y1 - y0) / (x1 - x0));
-
- }
-
- /* returns output value */
- return (y);
- }
-
-
- /**
- *
- * @brief Process function for the Q31 Linear Interpolation Function.
- * @param[in] pYData pointer to Q31 Linear Interpolation table
- * @param[in] x input sample to process
- * @param[in] nValues number of table values
- * @return y processed output sample.
- *
- * \par
- * Input sample <code>x</code> is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
- * This function can support maximum of table size 2^12.
- *
- */
- static __INLINE q31_t arm_linear_interp_q31(
- q31_t * pYData,
- q31_t x,
- uint32_t nValues)
- {
- q31_t y; /* output */
- q31_t y0, y1; /* Nearest output values */
- q31_t fract; /* fractional part */
- int32_t index; /* Index to read nearest output values */
-
- /* Input is in 12.20 format */
- /* 12 bits for the table index */
- /* Index value calculation */
- index = ((x & (q31_t)0xFFF00000) >> 20);
-
- if(index >= (int32_t)(nValues - 1))
- {
- return (pYData[nValues - 1]);
- }
- else if(index < 0)
- {
- return (pYData[0]);
- }
- else
- {
- /* 20 bits for the fractional part */
- /* shift left by 11 to keep fract in 1.31 format */
- fract = (x & 0x000FFFFF) << 11;
-
- /* Read two nearest output values from the index in 1.31(q31) format */
- y0 = pYData[index];
- y1 = pYData[index + 1];
-
- /* Calculation of y0 * (1-fract) and y is in 2.30 format */
- y = ((q31_t) ((q63_t) y0 * (0x7FFFFFFF - fract) >> 32));
-
- /* Calculation of y0 * (1-fract) + y1 *fract and y is in 2.30 format */
- y += ((q31_t) (((q63_t) y1 * fract) >> 32));
-
- /* Convert y to 1.31 format */
- return (y << 1u);
- }
- }
-
-
- /**
- *
- * @brief Process function for the Q15 Linear Interpolation Function.
- * @param[in] pYData pointer to Q15 Linear Interpolation table
- * @param[in] x input sample to process
- * @param[in] nValues number of table values
- * @return y processed output sample.
- *
- * \par
- * Input sample <code>x</code> is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
- * This function can support maximum of table size 2^12.
- *
- */
- static __INLINE q15_t arm_linear_interp_q15(
- q15_t * pYData,
- q31_t x,
- uint32_t nValues)
- {
- q63_t y; /* output */
- q15_t y0, y1; /* Nearest output values */
- q31_t fract; /* fractional part */
- int32_t index; /* Index to read nearest output values */
-
- /* Input is in 12.20 format */
- /* 12 bits for the table index */
- /* Index value calculation */
- index = ((x & (int32_t)0xFFF00000) >> 20);
-
- if(index >= (int32_t)(nValues - 1))
- {
- return (pYData[nValues - 1]);
- }
- else if(index < 0)
- {
- return (pYData[0]);
- }
- else
- {
- /* 20 bits for the fractional part */
- /* fract is in 12.20 format */
- fract = (x & 0x000FFFFF);
-
- /* Read two nearest output values from the index */
- y0 = pYData[index];
- y1 = pYData[index + 1];
-
- /* Calculation of y0 * (1-fract) and y is in 13.35 format */
- y = ((q63_t) y0 * (0xFFFFF - fract));
-
- /* Calculation of (y0 * (1-fract) + y1 * fract) and y is in 13.35 format */
- y += ((q63_t) y1 * (fract));
-
- /* convert y to 1.15 format */
- return (q15_t) (y >> 20);
- }
- }
-
-
- /**
- *
- * @brief Process function for the Q7 Linear Interpolation Function.
- * @param[in] pYData pointer to Q7 Linear Interpolation table
- * @param[in] x input sample to process
- * @param[in] nValues number of table values
- * @return y processed output sample.
- *
- * \par
- * Input sample <code>x</code> is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
- * This function can support maximum of table size 2^12.
- */
- static __INLINE q7_t arm_linear_interp_q7(
- q7_t * pYData,
- q31_t x,
- uint32_t nValues)
- {
- q31_t y; /* output */
- q7_t y0, y1; /* Nearest output values */
- q31_t fract; /* fractional part */
- uint32_t index; /* Index to read nearest output values */
-
- /* Input is in 12.20 format */
- /* 12 bits for the table index */
- /* Index value calculation */
- if (x < 0)
- {
- return (pYData[0]);
- }
- index = (x >> 20) & 0xfff;
-
- if(index >= (nValues - 1))
- {
- return (pYData[nValues - 1]);
- }
- else
- {
- /* 20 bits for the fractional part */
- /* fract is in 12.20 format */
- fract = (x & 0x000FFFFF);
-
- /* Read two nearest output values from the index and are in 1.7(q7) format */
- y0 = pYData[index];
- y1 = pYData[index + 1];
-
- /* Calculation of y0 * (1-fract ) and y is in 13.27(q27) format */
- y = ((y0 * (0xFFFFF - fract)));
-
- /* Calculation of y1 * fract + y0 * (1-fract) and y is in 13.27(q27) format */
- y += (y1 * fract);
-
- /* convert y to 1.7(q7) format */
- return (q7_t) (y >> 20);
- }
- }
-
- /**
- * @} end of LinearInterpolate group
- */
-
- /**
- * @brief Fast approximation to the trigonometric sine function for floating-point data.
- * @param[in] x input value in radians.
- * @return sin(x).
- */
- float32_t arm_sin_f32(
- float32_t x);
-
-
- /**
- * @brief Fast approximation to the trigonometric sine function for Q31 data.
- * @param[in] x Scaled input value in radians.
- * @return sin(x).
- */
- q31_t arm_sin_q31(
- q31_t x);
-
-
- /**
- * @brief Fast approximation to the trigonometric sine function for Q15 data.
- * @param[in] x Scaled input value in radians.
- * @return sin(x).
- */
- q15_t arm_sin_q15(
- q15_t x);
-
-
- /**
- * @brief Fast approximation to the trigonometric cosine function for floating-point data.
- * @param[in] x input value in radians.
- * @return cos(x).
- */
- float32_t arm_cos_f32(
- float32_t x);
-
-
- /**
- * @brief Fast approximation to the trigonometric cosine function for Q31 data.
- * @param[in] x Scaled input value in radians.
- * @return cos(x).
- */
- q31_t arm_cos_q31(
- q31_t x);
-
-
- /**
- * @brief Fast approximation to the trigonometric cosine function for Q15 data.
- * @param[in] x Scaled input value in radians.
- * @return cos(x).
- */
- q15_t arm_cos_q15(
- q15_t x);
-
-
- /**
- * @ingroup groupFastMath
- */
-
-
- /**
- * @defgroup SQRT Square Root
- *
- * Computes the square root of a number.
- * There are separate functions for Q15, Q31, and floating-point data types.
- * The square root function is computed using the Newton-Raphson algorithm.
- * This is an iterative algorithm of the form:
- * <pre>
- * x1 = x0 - f(x0)/f'(x0)
- * </pre>
- * where <code>x1</code> is the current estimate,
- * <code>x0</code> is the previous estimate, and
- * <code>f'(x0)</code> is the derivative of <code>f()</code> evaluated at <code>x0</code>.
- * For the square root function, the algorithm reduces to:
- * <pre>
- * x0 = in/2 [initial guess]
- * x1 = 1/2 * ( x0 + in / x0) [each iteration]
- * </pre>
- */
-
-
- /**
- * @addtogroup SQRT
- * @{
- */
-
- /**
- * @brief Floating-point square root function.
- * @param[in] in input value.
- * @param[out] pOut square root of input value.
- * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
- * <code>in</code> is negative value and returns zero output for negative values.
- */
- static __INLINE arm_status arm_sqrt_f32(
- float32_t in,
- float32_t * pOut)
- {
- if(in >= 0.0f)
- {
-
-#if (__FPU_USED == 1) && defined ( __CC_ARM )
- *pOut = __sqrtf(in);
-#elif (__FPU_USED == 1) && (defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050))
- *pOut = __builtin_sqrtf(in);
-#elif (__FPU_USED == 1) && defined(__GNUC__)
- *pOut = __builtin_sqrtf(in);
-#elif (__FPU_USED == 1) && defined ( __ICCARM__ ) && (__VER__ >= 6040000)
- __ASM("VSQRT.F32 %0,%1" : "=t"(*pOut) : "t"(in));
-#else
- *pOut = sqrtf(in);
-#endif
-
- return (ARM_MATH_SUCCESS);
- }
- else
- {
- *pOut = 0.0f;
- return (ARM_MATH_ARGUMENT_ERROR);
- }
- }
-
-
- /**
- * @brief Q31 square root function.
- * @param[in] in input value. The range of the input value is [0 +1) or 0x00000000 to 0x7FFFFFFF.
- * @param[out] pOut square root of input value.
- * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
- * <code>in</code> is negative value and returns zero output for negative values.
- */
- arm_status arm_sqrt_q31(
- q31_t in,
- q31_t * pOut);
-
-
- /**
- * @brief Q15 square root function.
- * @param[in] in input value. The range of the input value is [0 +1) or 0x0000 to 0x7FFF.
- * @param[out] pOut square root of input value.
- * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
- * <code>in</code> is negative value and returns zero output for negative values.
- */
- arm_status arm_sqrt_q15(
- q15_t in,
- q15_t * pOut);
-
- /**
- * @} end of SQRT group
- */
-
-
- /**
- * @brief floating-point Circular write function.
- */
- static __INLINE void arm_circularWrite_f32(
- int32_t * circBuffer,
- int32_t L,
- uint16_t * writeOffset,
- int32_t bufferInc,
- const int32_t * src,
- int32_t srcInc,
- uint32_t blockSize)
- {
- uint32_t i = 0u;
- int32_t wOffset;
-
- /* Copy the value of Index pointer that points
- * to the current location where the input samples to be copied */
- wOffset = *writeOffset;
-
- /* Loop over the blockSize */
- i = blockSize;
-
- while(i > 0u)
- {
- /* copy the input sample to the circular buffer */
- circBuffer[wOffset] = *src;
-
- /* Update the input pointer */
- src += srcInc;
-
- /* Circularly update wOffset. Watch out for positive and negative value */
- wOffset += bufferInc;
- if(wOffset >= L)
- wOffset -= L;
-
- /* Decrement the loop counter */
- i--;
- }
-
- /* Update the index pointer */
- *writeOffset = (uint16_t)wOffset;
- }
-
-
-
- /**
- * @brief floating-point Circular Read function.
- */
- static __INLINE void arm_circularRead_f32(
- int32_t * circBuffer,
- int32_t L,
- int32_t * readOffset,
- int32_t bufferInc,
- int32_t * dst,
- int32_t * dst_base,
- int32_t dst_length,
- int32_t dstInc,
- uint32_t blockSize)
- {
- uint32_t i = 0u;
- int32_t rOffset, dst_end;
-
- /* Copy the value of Index pointer that points
- * to the current location from where the input samples to be read */
- rOffset = *readOffset;
- dst_end = (int32_t) (dst_base + dst_length);
-
- /* Loop over the blockSize */
- i = blockSize;
-
- while(i > 0u)
- {
- /* copy the sample from the circular buffer to the destination buffer */
- *dst = circBuffer[rOffset];
-
- /* Update the input pointer */
- dst += dstInc;
-
- if(dst == (int32_t *) dst_end)
- {
- dst = dst_base;
- }
-
- /* Circularly update rOffset. Watch out for positive and negative value */
- rOffset += bufferInc;
-
- if(rOffset >= L)
- {
- rOffset -= L;
- }
-
- /* Decrement the loop counter */
- i--;
- }
-
- /* Update the index pointer */
- *readOffset = rOffset;
- }
-
-
- /**
- * @brief Q15 Circular write function.
- */
- static __INLINE void arm_circularWrite_q15(
- q15_t * circBuffer,
- int32_t L,
- uint16_t * writeOffset,
- int32_t bufferInc,
- const q15_t * src,
- int32_t srcInc,
- uint32_t blockSize)
- {
- uint32_t i = 0u;
- int32_t wOffset;
-
- /* Copy the value of Index pointer that points
- * to the current location where the input samples to be copied */
- wOffset = *writeOffset;
-
- /* Loop over the blockSize */
- i = blockSize;
-
- while(i > 0u)
- {
- /* copy the input sample to the circular buffer */
- circBuffer[wOffset] = *src;
-
- /* Update the input pointer */
- src += srcInc;
-
- /* Circularly update wOffset. Watch out for positive and negative value */
- wOffset += bufferInc;
- if(wOffset >= L)
- wOffset -= L;
-
- /* Decrement the loop counter */
- i--;
- }
-
- /* Update the index pointer */
- *writeOffset = (uint16_t)wOffset;
- }
-
-
- /**
- * @brief Q15 Circular Read function.
- */
- static __INLINE void arm_circularRead_q15(
- q15_t * circBuffer,
- int32_t L,
- int32_t * readOffset,
- int32_t bufferInc,
- q15_t * dst,
- q15_t * dst_base,
- int32_t dst_length,
- int32_t dstInc,
- uint32_t blockSize)
- {
- uint32_t i = 0;
- int32_t rOffset, dst_end;
-
- /* Copy the value of Index pointer that points
- * to the current location from where the input samples to be read */
- rOffset = *readOffset;
-
- dst_end = (int32_t) (dst_base + dst_length);
-
- /* Loop over the blockSize */
- i = blockSize;
-
- while(i > 0u)
- {
- /* copy the sample from the circular buffer to the destination buffer */
- *dst = circBuffer[rOffset];
-
- /* Update the input pointer */
- dst += dstInc;
-
- if(dst == (q15_t *) dst_end)
- {
- dst = dst_base;
- }
-
- /* Circularly update wOffset. Watch out for positive and negative value */
- rOffset += bufferInc;
-
- if(rOffset >= L)
- {
- rOffset -= L;
- }
-
- /* Decrement the loop counter */
- i--;
- }
-
- /* Update the index pointer */
- *readOffset = rOffset;
- }
-
-
- /**
- * @brief Q7 Circular write function.
- */
- static __INLINE void arm_circularWrite_q7(
- q7_t * circBuffer,
- int32_t L,
- uint16_t * writeOffset,
- int32_t bufferInc,
- const q7_t * src,
- int32_t srcInc,
- uint32_t blockSize)
- {
- uint32_t i = 0u;
- int32_t wOffset;
-
- /* Copy the value of Index pointer that points
- * to the current location where the input samples to be copied */
- wOffset = *writeOffset;
-
- /* Loop over the blockSize */
- i = blockSize;
-
- while(i > 0u)
- {
- /* copy the input sample to the circular buffer */
- circBuffer[wOffset] = *src;
-
- /* Update the input pointer */
- src += srcInc;
-
- /* Circularly update wOffset. Watch out for positive and negative value */
- wOffset += bufferInc;
- if(wOffset >= L)
- wOffset -= L;
-
- /* Decrement the loop counter */
- i--;
- }
-
- /* Update the index pointer */
- *writeOffset = (uint16_t)wOffset;
- }
-
-
- /**
- * @brief Q7 Circular Read function.
- */
- static __INLINE void arm_circularRead_q7(
- q7_t * circBuffer,
- int32_t L,
- int32_t * readOffset,
- int32_t bufferInc,
- q7_t * dst,
- q7_t * dst_base,
- int32_t dst_length,
- int32_t dstInc,
- uint32_t blockSize)
- {
- uint32_t i = 0;
- int32_t rOffset, dst_end;
-
- /* Copy the value of Index pointer that points
- * to the current location from where the input samples to be read */
- rOffset = *readOffset;
-
- dst_end = (int32_t) (dst_base + dst_length);
-
- /* Loop over the blockSize */
- i = blockSize;
-
- while(i > 0u)
- {
- /* copy the sample from the circular buffer to the destination buffer */
- *dst = circBuffer[rOffset];
-
- /* Update the input pointer */
- dst += dstInc;
-
- if(dst == (q7_t *) dst_end)
- {
- dst = dst_base;
- }
-
- /* Circularly update rOffset. Watch out for positive and negative value */
- rOffset += bufferInc;
-
- if(rOffset >= L)
- {
- rOffset -= L;
- }
-
- /* Decrement the loop counter */
- i--;
- }
-
- /* Update the index pointer */
- *readOffset = rOffset;
- }
-
-
- /**
- * @brief Sum of the squares of the elements of a Q31 vector.
- * @param[in] pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] pResult is output value.
- */
- void arm_power_q31(
- q31_t * pSrc,
- uint32_t blockSize,
- q63_t * pResult);
-
-
- /**
- * @brief Sum of the squares of the elements of a floating-point vector.
- * @param[in] pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] pResult is output value.
- */
- void arm_power_f32(
- float32_t * pSrc,
- uint32_t blockSize,
- float32_t * pResult);
-
-
- /**
- * @brief Sum of the squares of the elements of a Q15 vector.
- * @param[in] pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] pResult is output value.
- */
- void arm_power_q15(
- q15_t * pSrc,
- uint32_t blockSize,
- q63_t * pResult);
-
-
- /**
- * @brief Sum of the squares of the elements of a Q7 vector.
- * @param[in] pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] pResult is output value.
- */
- void arm_power_q7(
- q7_t * pSrc,
- uint32_t blockSize,
- q31_t * pResult);
-
-
- /**
- * @brief Mean value of a Q7 vector.
- * @param[in] pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] pResult is output value.
- */
- void arm_mean_q7(
- q7_t * pSrc,
- uint32_t blockSize,
- q7_t * pResult);
-
-
- /**
- * @brief Mean value of a Q15 vector.
- * @param[in] pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] pResult is output value.
- */
- void arm_mean_q15(
- q15_t * pSrc,
- uint32_t blockSize,
- q15_t * pResult);
-
-
- /**
- * @brief Mean value of a Q31 vector.
- * @param[in] pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] pResult is output value.
- */
- void arm_mean_q31(
- q31_t * pSrc,
- uint32_t blockSize,
- q31_t * pResult);
-
-
- /**
- * @brief Mean value of a floating-point vector.
- * @param[in] pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] pResult is output value.
- */
- void arm_mean_f32(
- float32_t * pSrc,
- uint32_t blockSize,
- float32_t * pResult);
-
-
- /**
- * @brief Variance of the elements of a floating-point vector.
- * @param[in] pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] pResult is output value.
- */
- void arm_var_f32(
- float32_t * pSrc,
- uint32_t blockSize,
- float32_t * pResult);
-
-
- /**
- * @brief Variance of the elements of a Q31 vector.
- * @param[in] pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] pResult is output value.
- */
- void arm_var_q31(
- q31_t * pSrc,
- uint32_t blockSize,
- q31_t * pResult);
-
-
- /**
- * @brief Variance of the elements of a Q15 vector.
- * @param[in] pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] pResult is output value.
- */
- void arm_var_q15(
- q15_t * pSrc,
- uint32_t blockSize,
- q15_t * pResult);
-
-
- /**
- * @brief Root Mean Square of the elements of a floating-point vector.
- * @param[in] pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] pResult is output value.
- */
- void arm_rms_f32(
- float32_t * pSrc,
- uint32_t blockSize,
- float32_t * pResult);
-
-
- /**
- * @brief Root Mean Square of the elements of a Q31 vector.
- * @param[in] pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] pResult is output value.
- */
- void arm_rms_q31(
- q31_t * pSrc,
- uint32_t blockSize,
- q31_t * pResult);
-
-
- /**
- * @brief Root Mean Square of the elements of a Q15 vector.
- * @param[in] pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] pResult is output value.
- */
- void arm_rms_q15(
- q15_t * pSrc,
- uint32_t blockSize,
- q15_t * pResult);
-
-
- /**
- * @brief Standard deviation of the elements of a floating-point vector.
- * @param[in] pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] pResult is output value.
- */
- void arm_std_f32(
- float32_t * pSrc,
- uint32_t blockSize,
- float32_t * pResult);
-
-
- /**
- * @brief Standard deviation of the elements of a Q31 vector.
- * @param[in] pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] pResult is output value.
- */
- void arm_std_q31(
- q31_t * pSrc,
- uint32_t blockSize,
- q31_t * pResult);
-
-
- /**
- * @brief Standard deviation of the elements of a Q15 vector.
- * @param[in] pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] pResult is output value.
- */
- void arm_std_q15(
- q15_t * pSrc,
- uint32_t blockSize,
- q15_t * pResult);
-
-
- /**
- * @brief Floating-point complex magnitude
- * @param[in] pSrc points to the complex input vector
- * @param[out] pDst points to the real output vector
- * @param[in] numSamples number of complex samples in the input vector
- */
- void arm_cmplx_mag_f32(
- float32_t * pSrc,
- float32_t * pDst,
- uint32_t numSamples);
-
-
- /**
- * @brief Q31 complex magnitude
- * @param[in] pSrc points to the complex input vector
- * @param[out] pDst points to the real output vector
- * @param[in] numSamples number of complex samples in the input vector
- */
- void arm_cmplx_mag_q31(
- q31_t * pSrc,
- q31_t * pDst,
- uint32_t numSamples);
-
-
- /**
- * @brief Q15 complex magnitude
- * @param[in] pSrc points to the complex input vector
- * @param[out] pDst points to the real output vector
- * @param[in] numSamples number of complex samples in the input vector
- */
- void arm_cmplx_mag_q15(
- q15_t * pSrc,
- q15_t * pDst,
- uint32_t numSamples);
-
-
- /**
- * @brief Q15 complex dot product
- * @param[in] pSrcA points to the first input vector
- * @param[in] pSrcB points to the second input vector
- * @param[in] numSamples number of complex samples in each vector
- * @param[out] realResult real part of the result returned here
- * @param[out] imagResult imaginary part of the result returned here
- */
- void arm_cmplx_dot_prod_q15(
- q15_t * pSrcA,
- q15_t * pSrcB,
- uint32_t numSamples,
- q31_t * realResult,
- q31_t * imagResult);
-
-
- /**
- * @brief Q31 complex dot product
- * @param[in] pSrcA points to the first input vector
- * @param[in] pSrcB points to the second input vector
- * @param[in] numSamples number of complex samples in each vector
- * @param[out] realResult real part of the result returned here
- * @param[out] imagResult imaginary part of the result returned here
- */
- void arm_cmplx_dot_prod_q31(
- q31_t * pSrcA,
- q31_t * pSrcB,
- uint32_t numSamples,
- q63_t * realResult,
- q63_t * imagResult);
-
-
- /**
- * @brief Floating-point complex dot product
- * @param[in] pSrcA points to the first input vector
- * @param[in] pSrcB points to the second input vector
- * @param[in] numSamples number of complex samples in each vector
- * @param[out] realResult real part of the result returned here
- * @param[out] imagResult imaginary part of the result returned here
- */
- void arm_cmplx_dot_prod_f32(
- float32_t * pSrcA,
- float32_t * pSrcB,
- uint32_t numSamples,
- float32_t * realResult,
- float32_t * imagResult);
-
-
- /**
- * @brief Q15 complex-by-real multiplication
- * @param[in] pSrcCmplx points to the complex input vector
- * @param[in] pSrcReal points to the real input vector
- * @param[out] pCmplxDst points to the complex output vector
- * @param[in] numSamples number of samples in each vector
- */
- void arm_cmplx_mult_real_q15(
- q15_t * pSrcCmplx,
- q15_t * pSrcReal,
- q15_t * pCmplxDst,
- uint32_t numSamples);
-
-
- /**
- * @brief Q31 complex-by-real multiplication
- * @param[in] pSrcCmplx points to the complex input vector
- * @param[in] pSrcReal points to the real input vector
- * @param[out] pCmplxDst points to the complex output vector
- * @param[in] numSamples number of samples in each vector
- */
- void arm_cmplx_mult_real_q31(
- q31_t * pSrcCmplx,
- q31_t * pSrcReal,
- q31_t * pCmplxDst,
- uint32_t numSamples);
-
-
- /**
- * @brief Floating-point complex-by-real multiplication
- * @param[in] pSrcCmplx points to the complex input vector
- * @param[in] pSrcReal points to the real input vector
- * @param[out] pCmplxDst points to the complex output vector
- * @param[in] numSamples number of samples in each vector
- */
- void arm_cmplx_mult_real_f32(
- float32_t * pSrcCmplx,
- float32_t * pSrcReal,
- float32_t * pCmplxDst,
- uint32_t numSamples);
-
-
- /**
- * @brief Minimum value of a Q7 vector.
- * @param[in] pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] result is output pointer
- * @param[in] index is the array index of the minimum value in the input buffer.
- */
- void arm_min_q7(
- q7_t * pSrc,
- uint32_t blockSize,
- q7_t * result,
- uint32_t * index);
-
-
- /**
- * @brief Minimum value of a Q15 vector.
- * @param[in] pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] pResult is output pointer
- * @param[in] pIndex is the array index of the minimum value in the input buffer.
- */
- void arm_min_q15(
- q15_t * pSrc,
- uint32_t blockSize,
- q15_t * pResult,
- uint32_t * pIndex);
-
-
- /**
- * @brief Minimum value of a Q31 vector.
- * @param[in] pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] pResult is output pointer
- * @param[out] pIndex is the array index of the minimum value in the input buffer.
- */
- void arm_min_q31(
- q31_t * pSrc,
- uint32_t blockSize,
- q31_t * pResult,
- uint32_t * pIndex);
-
-
- /**
- * @brief Minimum value of a floating-point vector.
- * @param[in] pSrc is input pointer
- * @param[in] blockSize is the number of samples to process
- * @param[out] pResult is output pointer
- * @param[out] pIndex is the array index of the minimum value in the input buffer.
- */
- void arm_min_f32(
- float32_t * pSrc,
- uint32_t blockSize,
- float32_t * pResult,
- uint32_t * pIndex);
-
-
-/**
- * @brief Maximum value of a Q7 vector.
- * @param[in] pSrc points to the input buffer
- * @param[in] blockSize length of the input vector
- * @param[out] pResult maximum value returned here
- * @param[out] pIndex index of maximum value returned here
- */
- void arm_max_q7(
- q7_t * pSrc,
- uint32_t blockSize,
- q7_t * pResult,
- uint32_t * pIndex);
-
-
-/**
- * @brief Maximum value of a Q15 vector.
- * @param[in] pSrc points to the input buffer
- * @param[in] blockSize length of the input vector
- * @param[out] pResult maximum value returned here
- * @param[out] pIndex index of maximum value returned here
- */
- void arm_max_q15(
- q15_t * pSrc,
- uint32_t blockSize,
- q15_t * pResult,
- uint32_t * pIndex);
-
-
-/**
- * @brief Maximum value of a Q31 vector.
- * @param[in] pSrc points to the input buffer
- * @param[in] blockSize length of the input vector
- * @param[out] pResult maximum value returned here
- * @param[out] pIndex index of maximum value returned here
- */
- void arm_max_q31(
- q31_t * pSrc,
- uint32_t blockSize,
- q31_t * pResult,
- uint32_t * pIndex);
-
-
-/**
- * @brief Maximum value of a floating-point vector.
- * @param[in] pSrc points to the input buffer
- * @param[in] blockSize length of the input vector
- * @param[out] pResult maximum value returned here
- * @param[out] pIndex index of maximum value returned here
- */
- void arm_max_f32(
- float32_t * pSrc,
- uint32_t blockSize,
- float32_t * pResult,
- uint32_t * pIndex);
-
-
- /**
- * @brief Q15 complex-by-complex multiplication
- * @param[in] pSrcA points to the first input vector
- * @param[in] pSrcB points to the second input vector
- * @param[out] pDst points to the output vector
- * @param[in] numSamples number of complex samples in each vector
- */
- void arm_cmplx_mult_cmplx_q15(
- q15_t * pSrcA,
- q15_t * pSrcB,
- q15_t * pDst,
- uint32_t numSamples);
-
-
- /**
- * @brief Q31 complex-by-complex multiplication
- * @param[in] pSrcA points to the first input vector
- * @param[in] pSrcB points to the second input vector
- * @param[out] pDst points to the output vector
- * @param[in] numSamples number of complex samples in each vector
- */
- void arm_cmplx_mult_cmplx_q31(
- q31_t * pSrcA,
- q31_t * pSrcB,
- q31_t * pDst,
- uint32_t numSamples);
-
-
- /**
- * @brief Floating-point complex-by-complex multiplication
- * @param[in] pSrcA points to the first input vector
- * @param[in] pSrcB points to the second input vector
- * @param[out] pDst points to the output vector
- * @param[in] numSamples number of complex samples in each vector
- */
- void arm_cmplx_mult_cmplx_f32(
- float32_t * pSrcA,
- float32_t * pSrcB,
- float32_t * pDst,
- uint32_t numSamples);
-
-
- /**
- * @brief Converts the elements of the floating-point vector to Q31 vector.
- * @param[in] pSrc points to the floating-point input vector
- * @param[out] pDst points to the Q31 output vector
- * @param[in] blockSize length of the input vector
- */
- void arm_float_to_q31(
- float32_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Converts the elements of the floating-point vector to Q15 vector.
- * @param[in] pSrc points to the floating-point input vector
- * @param[out] pDst points to the Q15 output vector
- * @param[in] blockSize length of the input vector
- */
- void arm_float_to_q15(
- float32_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Converts the elements of the floating-point vector to Q7 vector.
- * @param[in] pSrc points to the floating-point input vector
- * @param[out] pDst points to the Q7 output vector
- * @param[in] blockSize length of the input vector
- */
- void arm_float_to_q7(
- float32_t * pSrc,
- q7_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Converts the elements of the Q31 vector to Q15 vector.
- * @param[in] pSrc is input pointer
- * @param[out] pDst is output pointer
- * @param[in] blockSize is the number of samples to process
- */
- void arm_q31_to_q15(
- q31_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Converts the elements of the Q31 vector to Q7 vector.
- * @param[in] pSrc is input pointer
- * @param[out] pDst is output pointer
- * @param[in] blockSize is the number of samples to process
- */
- void arm_q31_to_q7(
- q31_t * pSrc,
- q7_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Converts the elements of the Q15 vector to floating-point vector.
- * @param[in] pSrc is input pointer
- * @param[out] pDst is output pointer
- * @param[in] blockSize is the number of samples to process
- */
- void arm_q15_to_float(
- q15_t * pSrc,
- float32_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Converts the elements of the Q15 vector to Q31 vector.
- * @param[in] pSrc is input pointer
- * @param[out] pDst is output pointer
- * @param[in] blockSize is the number of samples to process
- */
- void arm_q15_to_q31(
- q15_t * pSrc,
- q31_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @brief Converts the elements of the Q15 vector to Q7 vector.
- * @param[in] pSrc is input pointer
- * @param[out] pDst is output pointer
- * @param[in] blockSize is the number of samples to process
- */
- void arm_q15_to_q7(
- q15_t * pSrc,
- q7_t * pDst,
- uint32_t blockSize);
-
-
- /**
- * @ingroup groupInterpolation
- */
-
- /**
- * @defgroup BilinearInterpolate Bilinear Interpolation
- *
- * Bilinear interpolation is an extension of linear interpolation applied to a two dimensional grid.
- * The underlying function <code>f(x, y)</code> is sampled on a regular grid and the interpolation process
- * determines values between the grid points.
- * Bilinear interpolation is equivalent to two step linear interpolation, first in the x-dimension and then in the y-dimension.
- * Bilinear interpolation is often used in image processing to rescale images.
- * The CMSIS DSP library provides bilinear interpolation functions for Q7, Q15, Q31, and floating-point data types.
- *
- * <b>Algorithm</b>
- * \par
- * The instance structure used by the bilinear interpolation functions describes a two dimensional data table.
- * For floating-point, the instance structure is defined as:
- * <pre>
- * typedef struct
- * {
- * uint16_t numRows;
- * uint16_t numCols;
- * float32_t *pData;
- * } arm_bilinear_interp_instance_f32;
- * </pre>
- *
- * \par
- * where <code>numRows</code> specifies the number of rows in the table;
- * <code>numCols</code> specifies the number of columns in the table;
- * and <code>pData</code> points to an array of size <code>numRows*numCols</code> values.
- * The data table <code>pTable</code> is organized in row order and the supplied data values fall on integer indexes.
- * That is, table element (x,y) is located at <code>pTable[x + y*numCols]</code> where x and y are integers.
- *
- * \par
- * Let <code>(x, y)</code> specify the desired interpolation point. Then define:
- * <pre>
- * XF = floor(x)
- * YF = floor(y)
- * </pre>
- * \par
- * The interpolated output point is computed as:
- * <pre>
- * f(x, y) = f(XF, YF) * (1-(x-XF)) * (1-(y-YF))
- * + f(XF+1, YF) * (x-XF)*(1-(y-YF))
- * + f(XF, YF+1) * (1-(x-XF))*(y-YF)
- * + f(XF+1, YF+1) * (x-XF)*(y-YF)
- * </pre>
- * Note that the coordinates (x, y) contain integer and fractional components.
- * The integer components specify which portion of the table to use while the
- * fractional components control the interpolation processor.
- *
- * \par
- * if (x,y) are outside of the table boundary, Bilinear interpolation returns zero output.
- */
-
- /**
- * @addtogroup BilinearInterpolate
- * @{
- */
-
-
- /**
- *
- * @brief Floating-point bilinear interpolation.
- * @param[in,out] S points to an instance of the interpolation structure.
- * @param[in] X interpolation coordinate.
- * @param[in] Y interpolation coordinate.
- * @return out interpolated value.
- */
- static __INLINE float32_t arm_bilinear_interp_f32(
- const arm_bilinear_interp_instance_f32 * S,
- float32_t X,
- float32_t Y)
- {
- float32_t out;
- float32_t f00, f01, f10, f11;
- float32_t *pData = S->pData;
- int32_t xIndex, yIndex, index;
- float32_t xdiff, ydiff;
- float32_t b1, b2, b3, b4;
-
- xIndex = (int32_t) X;
- yIndex = (int32_t) Y;
-
- /* Care taken for table outside boundary */
- /* Returns zero output when values are outside table boundary */
- if(xIndex < 0 || xIndex > (S->numRows - 1) || yIndex < 0 || yIndex > (S->numCols - 1))
- {
- return (0);
- }
-
- /* Calculation of index for two nearest points in X-direction */
- index = (xIndex - 1) + (yIndex - 1) * S->numCols;
-
-
- /* Read two nearest points in X-direction */
- f00 = pData[index];
- f01 = pData[index + 1];
-
- /* Calculation of index for two nearest points in Y-direction */
- index = (xIndex - 1) + (yIndex) * S->numCols;
-
-
- /* Read two nearest points in Y-direction */
- f10 = pData[index];
- f11 = pData[index + 1];
-
- /* Calculation of intermediate values */
- b1 = f00;
- b2 = f01 - f00;
- b3 = f10 - f00;
- b4 = f00 - f01 - f10 + f11;
-
- /* Calculation of fractional part in X */
- xdiff = X - xIndex;
-
- /* Calculation of fractional part in Y */
- ydiff = Y - yIndex;
-
- /* Calculation of bi-linear interpolated output */
- out = b1 + b2 * xdiff + b3 * ydiff + b4 * xdiff * ydiff;
-
- /* return to application */
- return (out);
- }
-
-
- /**
- *
- * @brief Q31 bilinear interpolation.
- * @param[in,out] S points to an instance of the interpolation structure.
- * @param[in] X interpolation coordinate in 12.20 format.
- * @param[in] Y interpolation coordinate in 12.20 format.
- * @return out interpolated value.
- */
- static __INLINE q31_t arm_bilinear_interp_q31(
- arm_bilinear_interp_instance_q31 * S,
- q31_t X,
- q31_t Y)
- {
- q31_t out; /* Temporary output */
- q31_t acc = 0; /* output */
- q31_t xfract, yfract; /* X, Y fractional parts */
- q31_t x1, x2, y1, y2; /* Nearest output values */
- int32_t rI, cI; /* Row and column indices */
- q31_t *pYData = S->pData; /* pointer to output table values */
- uint32_t nCols = S->numCols; /* num of rows */
-
- /* Input is in 12.20 format */
- /* 12 bits for the table index */
- /* Index value calculation */
- rI = ((X & (q31_t)0xFFF00000) >> 20);
-
- /* Input is in 12.20 format */
- /* 12 bits for the table index */
- /* Index value calculation */
- cI = ((Y & (q31_t)0xFFF00000) >> 20);
-
- /* Care taken for table outside boundary */
- /* Returns zero output when values are outside table boundary */
- if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
- {
- return (0);
- }
-
- /* 20 bits for the fractional part */
- /* shift left xfract by 11 to keep 1.31 format */
- xfract = (X & 0x000FFFFF) << 11u;
-
- /* Read two nearest output values from the index */
- x1 = pYData[(rI) + (int32_t)nCols * (cI) ];
- x2 = pYData[(rI) + (int32_t)nCols * (cI) + 1];
-
- /* 20 bits for the fractional part */
- /* shift left yfract by 11 to keep 1.31 format */
- yfract = (Y & 0x000FFFFF) << 11u;
-
- /* Read two nearest output values from the index */
- y1 = pYData[(rI) + (int32_t)nCols * (cI + 1) ];
- y2 = pYData[(rI) + (int32_t)nCols * (cI + 1) + 1];
-
- /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 3.29(q29) format */
- out = ((q31_t) (((q63_t) x1 * (0x7FFFFFFF - xfract)) >> 32));
- acc = ((q31_t) (((q63_t) out * (0x7FFFFFFF - yfract)) >> 32));
-
- /* x2 * (xfract) * (1-yfract) in 3.29(q29) and adding to acc */
- out = ((q31_t) ((q63_t) x2 * (0x7FFFFFFF - yfract) >> 32));
- acc += ((q31_t) ((q63_t) out * (xfract) >> 32));
-
- /* y1 * (1 - xfract) * (yfract) in 3.29(q29) and adding to acc */
- out = ((q31_t) ((q63_t) y1 * (0x7FFFFFFF - xfract) >> 32));
- acc += ((q31_t) ((q63_t) out * (yfract) >> 32));
-
- /* y2 * (xfract) * (yfract) in 3.29(q29) and adding to acc */
- out = ((q31_t) ((q63_t) y2 * (xfract) >> 32));
- acc += ((q31_t) ((q63_t) out * (yfract) >> 32));
-
- /* Convert acc to 1.31(q31) format */
- return ((q31_t)(acc << 2));
- }
-
-
- /**
- * @brief Q15 bilinear interpolation.
- * @param[in,out] S points to an instance of the interpolation structure.
- * @param[in] X interpolation coordinate in 12.20 format.
- * @param[in] Y interpolation coordinate in 12.20 format.
- * @return out interpolated value.
- */
- static __INLINE q15_t arm_bilinear_interp_q15(
- arm_bilinear_interp_instance_q15 * S,
- q31_t X,
- q31_t Y)
- {
- q63_t acc = 0; /* output */
- q31_t out; /* Temporary output */
- q15_t x1, x2, y1, y2; /* Nearest output values */
- q31_t xfract, yfract; /* X, Y fractional parts */
- int32_t rI, cI; /* Row and column indices */
- q15_t *pYData = S->pData; /* pointer to output table values */
- uint32_t nCols = S->numCols; /* num of rows */
-
- /* Input is in 12.20 format */
- /* 12 bits for the table index */
- /* Index value calculation */
- rI = ((X & (q31_t)0xFFF00000) >> 20);
-
- /* Input is in 12.20 format */
- /* 12 bits for the table index */
- /* Index value calculation */
- cI = ((Y & (q31_t)0xFFF00000) >> 20);
-
- /* Care taken for table outside boundary */
- /* Returns zero output when values are outside table boundary */
- if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
- {
- return (0);
- }
-
- /* 20 bits for the fractional part */
- /* xfract should be in 12.20 format */
- xfract = (X & 0x000FFFFF);
-
- /* Read two nearest output values from the index */
- x1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) ];
- x2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) + 1];
-
- /* 20 bits for the fractional part */
- /* yfract should be in 12.20 format */
- yfract = (Y & 0x000FFFFF);
-
- /* Read two nearest output values from the index */
- y1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) ];
- y2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) + 1];
-
- /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 13.51 format */
-
- /* x1 is in 1.15(q15), xfract in 12.20 format and out is in 13.35 format */
- /* convert 13.35 to 13.31 by right shifting and out is in 1.31 */
- out = (q31_t) (((q63_t) x1 * (0xFFFFF - xfract)) >> 4u);
- acc = ((q63_t) out * (0xFFFFF - yfract));
-
- /* x2 * (xfract) * (1-yfract) in 1.51 and adding to acc */
- out = (q31_t) (((q63_t) x2 * (0xFFFFF - yfract)) >> 4u);
- acc += ((q63_t) out * (xfract));
-
- /* y1 * (1 - xfract) * (yfract) in 1.51 and adding to acc */
- out = (q31_t) (((q63_t) y1 * (0xFFFFF - xfract)) >> 4u);
- acc += ((q63_t) out * (yfract));
-
- /* y2 * (xfract) * (yfract) in 1.51 and adding to acc */
- out = (q31_t) (((q63_t) y2 * (xfract)) >> 4u);
- acc += ((q63_t) out * (yfract));
-
- /* acc is in 13.51 format and down shift acc by 36 times */
- /* Convert out to 1.15 format */
- return ((q15_t)(acc >> 36));
- }
-
-
- /**
- * @brief Q7 bilinear interpolation.
- * @param[in,out] S points to an instance of the interpolation structure.
- * @param[in] X interpolation coordinate in 12.20 format.
- * @param[in] Y interpolation coordinate in 12.20 format.
- * @return out interpolated value.
- */
- static __INLINE q7_t arm_bilinear_interp_q7(
- arm_bilinear_interp_instance_q7 * S,
- q31_t X,
- q31_t Y)
- {
- q63_t acc = 0; /* output */
- q31_t out; /* Temporary output */
- q31_t xfract, yfract; /* X, Y fractional parts */
- q7_t x1, x2, y1, y2; /* Nearest output values */
- int32_t rI, cI; /* Row and column indices */
- q7_t *pYData = S->pData; /* pointer to output table values */
- uint32_t nCols = S->numCols; /* num of rows */
-
- /* Input is in 12.20 format */
- /* 12 bits for the table index */
- /* Index value calculation */
- rI = ((X & (q31_t)0xFFF00000) >> 20);
-
- /* Input is in 12.20 format */
- /* 12 bits for the table index */
- /* Index value calculation */
- cI = ((Y & (q31_t)0xFFF00000) >> 20);
-
- /* Care taken for table outside boundary */
- /* Returns zero output when values are outside table boundary */
- if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
- {
- return (0);
- }
-
- /* 20 bits for the fractional part */
- /* xfract should be in 12.20 format */
- xfract = (X & (q31_t)0x000FFFFF);
-
- /* Read two nearest output values from the index */
- x1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) ];
- x2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) + 1];
-
- /* 20 bits for the fractional part */
- /* yfract should be in 12.20 format */
- yfract = (Y & (q31_t)0x000FFFFF);
-
- /* Read two nearest output values from the index */
- y1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) ];
- y2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) + 1];
-
- /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 16.47 format */
- out = ((x1 * (0xFFFFF - xfract)));
- acc = (((q63_t) out * (0xFFFFF - yfract)));
-
- /* x2 * (xfract) * (1-yfract) in 2.22 and adding to acc */
- out = ((x2 * (0xFFFFF - yfract)));
- acc += (((q63_t) out * (xfract)));
-
- /* y1 * (1 - xfract) * (yfract) in 2.22 and adding to acc */
- out = ((y1 * (0xFFFFF - xfract)));
- acc += (((q63_t) out * (yfract)));
-
- /* y2 * (xfract) * (yfract) in 2.22 and adding to acc */
- out = ((y2 * (yfract)));
- acc += (((q63_t) out * (xfract)));
-
- /* acc in 16.47 format and down shift by 40 to convert to 1.7 format */
- return ((q7_t)(acc >> 40));
- }
-
- /**
- * @} end of BilinearInterpolate group
- */
-
-
-/* SMMLAR */
-#define multAcc_32x32_keep32_R(a, x, y) \
- a = (q31_t) (((((q63_t) a) << 32) + ((q63_t) x * y) + 0x80000000LL ) >> 32)
-
-/* SMMLSR */
-#define multSub_32x32_keep32_R(a, x, y) \
- a = (q31_t) (((((q63_t) a) << 32) - ((q63_t) x * y) + 0x80000000LL ) >> 32)
-
-/* SMMULR */
-#define mult_32x32_keep32_R(a, x, y) \
- a = (q31_t) (((q63_t) x * y + 0x80000000LL ) >> 32)
-
-/* SMMLA */
-#define multAcc_32x32_keep32(a, x, y) \
- a += (q31_t) (((q63_t) x * y) >> 32)
-
-/* SMMLS */
-#define multSub_32x32_keep32(a, x, y) \
- a -= (q31_t) (((q63_t) x * y) >> 32)
-
-/* SMMUL */
-#define mult_32x32_keep32(a, x, y) \
- a = (q31_t) (((q63_t) x * y ) >> 32)
-
-
-#if defined ( __CC_ARM )
- /* Enter low optimization region - place directly above function definition */
- #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7)
- #define LOW_OPTIMIZATION_ENTER \
- _Pragma ("push") \
- _Pragma ("O1")
- #else
- #define LOW_OPTIMIZATION_ENTER
- #endif
-
- /* Exit low optimization region - place directly after end of function definition */
- #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7)
- #define LOW_OPTIMIZATION_EXIT \
- _Pragma ("pop")
- #else
- #define LOW_OPTIMIZATION_EXIT
- #endif
-
- /* Enter low optimization region - place directly above function definition */
- #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
-
- /* Exit low optimization region - place directly after end of function definition */
- #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
-
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #define LOW_OPTIMIZATION_ENTER
- #define LOW_OPTIMIZATION_EXIT
- #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
- #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
-
-#elif defined(__GNUC__)
- #define LOW_OPTIMIZATION_ENTER __attribute__(( optimize("-O1") ))
- #define LOW_OPTIMIZATION_EXIT
- #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
- #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
-
-#elif defined(__ICCARM__)
- /* Enter low optimization region - place directly above function definition */
- #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7)
- #define LOW_OPTIMIZATION_ENTER \
- _Pragma ("optimize=low")
- #else
- #define LOW_OPTIMIZATION_ENTER
- #endif
-
- /* Exit low optimization region - place directly after end of function definition */
- #define LOW_OPTIMIZATION_EXIT
-
- /* Enter low optimization region - place directly above function definition */
- #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7)
- #define IAR_ONLY_LOW_OPTIMIZATION_ENTER \
- _Pragma ("optimize=low")
- #else
- #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
- #endif
-
- /* Exit low optimization region - place directly after end of function definition */
- #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
-
-#elif defined(__CSMC__)
- #define LOW_OPTIMIZATION_ENTER
- #define LOW_OPTIMIZATION_EXIT
- #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
- #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
-
-#elif defined(__TASKING__)
- #define LOW_OPTIMIZATION_ENTER
- #define LOW_OPTIMIZATION_EXIT
- #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
- #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
-
-#endif
-
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#if defined ( __GNUC__ )
-#pragma GCC diagnostic pop
-#endif
-
-#endif /* _ARM_MATH_H */
-
-/**
- *
- * End of file.
- */
diff --git a/stm32cubemx/Drivers/CMSIS/Include/cmsis_armcc.h b/stm32cubemx/Drivers/CMSIS/Include/cmsis_armcc.h
deleted file mode 100644
index 74c49c6..0000000
--- a/stm32cubemx/Drivers/CMSIS/Include/cmsis_armcc.h
+++ /dev/null
@@ -1,734 +0,0 @@
-/**************************************************************************//**
- * @file cmsis_armcc.h
- * @brief CMSIS Cortex-M Core Function/Instruction Header File
- * @version V4.30
- * @date 20. October 2015
- ******************************************************************************/
-/* Copyright (c) 2009 - 2015 ARM LIMITED
-
- All rights reserved.
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- - Neither the name of ARM nor the names of its contributors may be used
- to endorse or promote products derived from this software without
- specific prior written permission.
- *
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- POSSIBILITY OF SUCH DAMAGE.
- ---------------------------------------------------------------------------*/
-
-
-#ifndef __CMSIS_ARMCC_H
-#define __CMSIS_ARMCC_H
-
-
-#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677)
- #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
-#endif
-
-/* ########################### Core Function Access ########################### */
-/** \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
- @{
- */
-
-/* intrinsic void __enable_irq(); */
-/* intrinsic void __disable_irq(); */
-
-/**
- \brief Get Control Register
- \details Returns the content of the Control Register.
- \return Control Register value
- */
-__STATIC_INLINE uint32_t __get_CONTROL(void)
-{
- register uint32_t __regControl __ASM("control");
- return(__regControl);
-}
-
-
-/**
- \brief Set Control Register
- \details Writes the given value to the Control Register.
- \param [in] control Control Register value to set
- */
-__STATIC_INLINE void __set_CONTROL(uint32_t control)
-{
- register uint32_t __regControl __ASM("control");
- __regControl = control;
-}
-
-
-/**
- \brief Get IPSR Register
- \details Returns the content of the IPSR Register.
- \return IPSR Register value
- */
-__STATIC_INLINE uint32_t __get_IPSR(void)
-{
- register uint32_t __regIPSR __ASM("ipsr");
- return(__regIPSR);
-}
-
-
-/**
- \brief Get APSR Register
- \details Returns the content of the APSR Register.
- \return APSR Register value
- */
-__STATIC_INLINE uint32_t __get_APSR(void)
-{
- register uint32_t __regAPSR __ASM("apsr");
- return(__regAPSR);
-}
-
-
-/**
- \brief Get xPSR Register
- \details Returns the content of the xPSR Register.
- \return xPSR Register value
- */
-__STATIC_INLINE uint32_t __get_xPSR(void)
-{
- register uint32_t __regXPSR __ASM("xpsr");
- return(__regXPSR);
-}
-
-
-/**
- \brief Get Process Stack Pointer
- \details Returns the current value of the Process Stack Pointer (PSP).
- \return PSP Register value
- */
-__STATIC_INLINE uint32_t __get_PSP(void)
-{
- register uint32_t __regProcessStackPointer __ASM("psp");
- return(__regProcessStackPointer);
-}
-
-
-/**
- \brief Set Process Stack Pointer
- \details Assigns the given value to the Process Stack Pointer (PSP).
- \param [in] topOfProcStack Process Stack Pointer value to set
- */
-__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
-{
- register uint32_t __regProcessStackPointer __ASM("psp");
- __regProcessStackPointer = topOfProcStack;
-}
-
-
-/**
- \brief Get Main Stack Pointer
- \details Returns the current value of the Main Stack Pointer (MSP).
- \return MSP Register value
- */
-__STATIC_INLINE uint32_t __get_MSP(void)
-{
- register uint32_t __regMainStackPointer __ASM("msp");
- return(__regMainStackPointer);
-}
-
-
-/**
- \brief Set Main Stack Pointer
- \details Assigns the given value to the Main Stack Pointer (MSP).
- \param [in] topOfMainStack Main Stack Pointer value to set
- */
-__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
-{
- register uint32_t __regMainStackPointer __ASM("msp");
- __regMainStackPointer = topOfMainStack;
-}
-
-
-/**
- \brief Get Priority Mask
- \details Returns the current state of the priority mask bit from the Priority Mask Register.
- \return Priority Mask value
- */
-__STATIC_INLINE uint32_t __get_PRIMASK(void)
-{
- register uint32_t __regPriMask __ASM("primask");
- return(__regPriMask);
-}
-
-
-/**
- \brief Set Priority Mask
- \details Assigns the given value to the Priority Mask Register.
- \param [in] priMask Priority Mask
- */
-__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
-{
- register uint32_t __regPriMask __ASM("primask");
- __regPriMask = (priMask);
-}
-
-
-#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
-
-/**
- \brief Enable FIQ
- \details Enables FIQ interrupts by clearing the F-bit in the CPSR.
- Can only be executed in Privileged modes.
- */
-#define __enable_fault_irq __enable_fiq
-
-
-/**
- \brief Disable FIQ
- \details Disables FIQ interrupts by setting the F-bit in the CPSR.
- Can only be executed in Privileged modes.
- */
-#define __disable_fault_irq __disable_fiq
-
-
-/**
- \brief Get Base Priority
- \details Returns the current value of the Base Priority register.
- \return Base Priority register value
- */
-__STATIC_INLINE uint32_t __get_BASEPRI(void)
-{
- register uint32_t __regBasePri __ASM("basepri");
- return(__regBasePri);
-}
-
-
-/**
- \brief Set Base Priority
- \details Assigns the given value to the Base Priority register.
- \param [in] basePri Base Priority value to set
- */
-__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
-{
- register uint32_t __regBasePri __ASM("basepri");
- __regBasePri = (basePri & 0xFFU);
-}
-
-
-/**
- \brief Set Base Priority with condition
- \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
- or the new value increases the BASEPRI priority level.
- \param [in] basePri Base Priority value to set
- */
-__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri)
-{
- register uint32_t __regBasePriMax __ASM("basepri_max");
- __regBasePriMax = (basePri & 0xFFU);
-}
-
-
-/**
- \brief Get Fault Mask
- \details Returns the current value of the Fault Mask register.
- \return Fault Mask register value
- */
-__STATIC_INLINE uint32_t __get_FAULTMASK(void)
-{
- register uint32_t __regFaultMask __ASM("faultmask");
- return(__regFaultMask);
-}
-
-
-/**
- \brief Set Fault Mask
- \details Assigns the given value to the Fault Mask register.
- \param [in] faultMask Fault Mask value to set
- */
-__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
-{
- register uint32_t __regFaultMask __ASM("faultmask");
- __regFaultMask = (faultMask & (uint32_t)1);
-}
-
-#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */
-
-
-#if (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U)
-
-/**
- \brief Get FPSCR
- \details Returns the current value of the Floating Point Status/Control register.
- \return Floating Point Status/Control register value
- */
-__STATIC_INLINE uint32_t __get_FPSCR(void)
-{
-#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
- register uint32_t __regfpscr __ASM("fpscr");
- return(__regfpscr);
-#else
- return(0U);
-#endif
-}
-
-
-/**
- \brief Set FPSCR
- \details Assigns the given value to the Floating Point Status/Control register.
- \param [in] fpscr Floating Point Status/Control value to set
- */
-__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
-{
-#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
- register uint32_t __regfpscr __ASM("fpscr");
- __regfpscr = (fpscr);
-#endif
-}
-
-#endif /* (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U) */
-
-
-
-/*@} end of CMSIS_Core_RegAccFunctions */
-
-
-/* ########################## Core Instruction Access ######################### */
-/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
- Access to dedicated instructions
- @{
-*/
-
-/**
- \brief No Operation
- \details No Operation does nothing. This instruction can be used for code alignment purposes.
- */
-#define __NOP __nop
-
-
-/**
- \brief Wait For Interrupt
- \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
- */
-#define __WFI __wfi
-
-
-/**
- \brief Wait For Event
- \details Wait For Event is a hint instruction that permits the processor to enter
- a low-power state until one of a number of events occurs.
- */
-#define __WFE __wfe
-
-
-/**
- \brief Send Event
- \details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
- */
-#define __SEV __sev
-
-
-/**
- \brief Instruction Synchronization Barrier
- \details Instruction Synchronization Barrier flushes the pipeline in the processor,
- so that all instructions following the ISB are fetched from cache or memory,
- after the instruction has been completed.
- */
-#define __ISB() do {\
- __schedule_barrier();\
- __isb(0xF);\
- __schedule_barrier();\
- } while (0U)
-
-/**
- \brief Data Synchronization Barrier
- \details Acts as a special kind of Data Memory Barrier.
- It completes when all explicit memory accesses before this instruction complete.
- */
-#define __DSB() do {\
- __schedule_barrier();\
- __dsb(0xF);\
- __schedule_barrier();\
- } while (0U)
-
-/**
- \brief Data Memory Barrier
- \details Ensures the apparent order of the explicit memory operations before
- and after the instruction, without ensuring their completion.
- */
-#define __DMB() do {\
- __schedule_barrier();\
- __dmb(0xF);\
- __schedule_barrier();\
- } while (0U)
-
-/**
- \brief Reverse byte order (32 bit)
- \details Reverses the byte order in integer value.
- \param [in] value Value to reverse
- \return Reversed value
- */
-#define __REV __rev
-
-
-/**
- \brief Reverse byte order (16 bit)
- \details Reverses the byte order in two unsigned short values.
- \param [in] value Value to reverse
- \return Reversed value
- */
-#ifndef __NO_EMBEDDED_ASM
-__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
-{
- rev16 r0, r0
- bx lr
-}
-#endif
-
-/**
- \brief Reverse byte order in signed short value
- \details Reverses the byte order in a signed short value with sign extension to integer.
- \param [in] value Value to reverse
- \return Reversed value
- */
-#ifndef __NO_EMBEDDED_ASM
-__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
-{
- revsh r0, r0
- bx lr
-}
-#endif
-
-
-/**
- \brief Rotate Right in unsigned value (32 bit)
- \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
- \param [in] value Value to rotate
- \param [in] value Number of Bits to rotate
- \return Rotated value
- */
-#define __ROR __ror
-
-
-/**
- \brief Breakpoint
- \details Causes the processor to enter Debug state.
- Debug tools can use this to investigate system state when the instruction at a particular address is reached.
- \param [in] value is ignored by the processor.
- If required, a debugger can use it to store additional information about the breakpoint.
- */
-#define __BKPT(value) __breakpoint(value)
-
-
-/**
- \brief Reverse bit order of value
- \details Reverses the bit order of the given value.
- \param [in] value Value to reverse
- \return Reversed value
- */
-#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
- #define __RBIT __rbit
-#else
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
-{
- uint32_t result;
- int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */
-
- result = value; /* r will be reversed bits of v; first get LSB of v */
- for (value >>= 1U; value; value >>= 1U)
- {
- result <<= 1U;
- result |= value & 1U;
- s--;
- }
- result <<= s; /* shift when v's highest bits are zero */
- return(result);
-}
-#endif
-
-
-/**
- \brief Count leading zeros
- \details Counts the number of leading zeros of a data value.
- \param [in] value Value to count the leading zeros
- \return number of leading zeros in value
- */
-#define __CLZ __clz
-
-
-#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
-
-/**
- \brief LDR Exclusive (8 bit)
- \details Executes a exclusive LDR instruction for 8 bit value.
- \param [in] ptr Pointer to data
- \return value of type uint8_t at (*ptr)
- */
-#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
- #define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
-#else
- #define __LDREXB(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr)) _Pragma("pop")
-#endif
-
-
-/**
- \brief LDR Exclusive (16 bit)
- \details Executes a exclusive LDR instruction for 16 bit values.
- \param [in] ptr Pointer to data
- \return value of type uint16_t at (*ptr)
- */
-#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
- #define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
-#else
- #define __LDREXH(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr)) _Pragma("pop")
-#endif
-
-
-/**
- \brief LDR Exclusive (32 bit)
- \details Executes a exclusive LDR instruction for 32 bit values.
- \param [in] ptr Pointer to data
- \return value of type uint32_t at (*ptr)
- */
-#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
- #define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
-#else
- #define __LDREXW(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr)) _Pragma("pop")
-#endif
-
-
-/**
- \brief STR Exclusive (8 bit)
- \details Executes a exclusive STR instruction for 8 bit values.
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- \return 0 Function succeeded
- \return 1 Function failed
- */
-#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
- #define __STREXB(value, ptr) __strex(value, ptr)
-#else
- #define __STREXB(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
-#endif
-
-
-/**
- \brief STR Exclusive (16 bit)
- \details Executes a exclusive STR instruction for 16 bit values.
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- \return 0 Function succeeded
- \return 1 Function failed
- */
-#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
- #define __STREXH(value, ptr) __strex(value, ptr)
-#else
- #define __STREXH(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
-#endif
-
-
-/**
- \brief STR Exclusive (32 bit)
- \details Executes a exclusive STR instruction for 32 bit values.
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- \return 0 Function succeeded
- \return 1 Function failed
- */
-#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
- #define __STREXW(value, ptr) __strex(value, ptr)
-#else
- #define __STREXW(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
-#endif
-
-
-/**
- \brief Remove the exclusive lock
- \details Removes the exclusive lock which is created by LDREX.
- */
-#define __CLREX __clrex
-
-
-/**
- \brief Signed Saturate
- \details Saturates a signed value.
- \param [in] value Value to be saturated
- \param [in] sat Bit position to saturate to (1..32)
- \return Saturated value
- */
-#define __SSAT __ssat
-
-
-/**
- \brief Unsigned Saturate
- \details Saturates an unsigned value.
- \param [in] value Value to be saturated
- \param [in] sat Bit position to saturate to (0..31)
- \return Saturated value
- */
-#define __USAT __usat
-
-
-/**
- \brief Rotate Right with Extend (32 bit)
- \details Moves each bit of a bitstring right by one bit.
- The carry input is shifted in at the left end of the bitstring.
- \param [in] value Value to rotate
- \return Rotated value
- */
-#ifndef __NO_EMBEDDED_ASM
-__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value)
-{
- rrx r0, r0
- bx lr
-}
-#endif
-
-
-/**
- \brief LDRT Unprivileged (8 bit)
- \details Executes a Unprivileged LDRT instruction for 8 bit value.
- \param [in] ptr Pointer to data
- \return value of type uint8_t at (*ptr)
- */
-#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr))
-
-
-/**
- \brief LDRT Unprivileged (16 bit)
- \details Executes a Unprivileged LDRT instruction for 16 bit values.
- \param [in] ptr Pointer to data
- \return value of type uint16_t at (*ptr)
- */
-#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr))
-
-
-/**
- \brief LDRT Unprivileged (32 bit)
- \details Executes a Unprivileged LDRT instruction for 32 bit values.
- \param [in] ptr Pointer to data
- \return value of type uint32_t at (*ptr)
- */
-#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr))
-
-
-/**
- \brief STRT Unprivileged (8 bit)
- \details Executes a Unprivileged STRT instruction for 8 bit values.
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- */
-#define __STRBT(value, ptr) __strt(value, ptr)
-
-
-/**
- \brief STRT Unprivileged (16 bit)
- \details Executes a Unprivileged STRT instruction for 16 bit values.
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- */
-#define __STRHT(value, ptr) __strt(value, ptr)
-
-
-/**
- \brief STRT Unprivileged (32 bit)
- \details Executes a Unprivileged STRT instruction for 32 bit values.
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- */
-#define __STRT(value, ptr) __strt(value, ptr)
-
-#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */
-
-/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
-
-
-/* ################### Compiler specific Intrinsics ########################### */
-/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
- Access to dedicated SIMD instructions
- @{
-*/
-
-#if (__CORTEX_M >= 0x04U) /* only for Cortex-M4 and above */
-
-#define __SADD8 __sadd8
-#define __QADD8 __qadd8
-#define __SHADD8 __shadd8
-#define __UADD8 __uadd8
-#define __UQADD8 __uqadd8
-#define __UHADD8 __uhadd8
-#define __SSUB8 __ssub8
-#define __QSUB8 __qsub8
-#define __SHSUB8 __shsub8
-#define __USUB8 __usub8
-#define __UQSUB8 __uqsub8
-#define __UHSUB8 __uhsub8
-#define __SADD16 __sadd16
-#define __QADD16 __qadd16
-#define __SHADD16 __shadd16
-#define __UADD16 __uadd16
-#define __UQADD16 __uqadd16
-#define __UHADD16 __uhadd16
-#define __SSUB16 __ssub16
-#define __QSUB16 __qsub16
-#define __SHSUB16 __shsub16
-#define __USUB16 __usub16
-#define __UQSUB16 __uqsub16
-#define __UHSUB16 __uhsub16
-#define __SASX __sasx
-#define __QASX __qasx
-#define __SHASX __shasx
-#define __UASX __uasx
-#define __UQASX __uqasx
-#define __UHASX __uhasx
-#define __SSAX __ssax
-#define __QSAX __qsax
-#define __SHSAX __shsax
-#define __USAX __usax
-#define __UQSAX __uqsax
-#define __UHSAX __uhsax
-#define __USAD8 __usad8
-#define __USADA8 __usada8
-#define __SSAT16 __ssat16
-#define __USAT16 __usat16
-#define __UXTB16 __uxtb16
-#define __UXTAB16 __uxtab16
-#define __SXTB16 __sxtb16
-#define __SXTAB16 __sxtab16
-#define __SMUAD __smuad
-#define __SMUADX __smuadx
-#define __SMLAD __smlad
-#define __SMLADX __smladx
-#define __SMLALD __smlald
-#define __SMLALDX __smlaldx
-#define __SMUSD __smusd
-#define __SMUSDX __smusdx
-#define __SMLSD __smlsd
-#define __SMLSDX __smlsdx
-#define __SMLSLD __smlsld
-#define __SMLSLDX __smlsldx
-#define __SEL __sel
-#define __QADD __qadd
-#define __QSUB __qsub
-
-#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
- ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
-
-#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
- ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
-
-#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
- ((int64_t)(ARG3) << 32U) ) >> 32U))
-
-#endif /* (__CORTEX_M >= 0x04) */
-/*@} end of group CMSIS_SIMD_intrinsics */
-
-
-#endif /* __CMSIS_ARMCC_H */
diff --git a/stm32cubemx/Drivers/CMSIS/Include/cmsis_armcc_V6.h b/stm32cubemx/Drivers/CMSIS/Include/cmsis_armcc_V6.h
deleted file mode 100644
index cd13240..0000000
--- a/stm32cubemx/Drivers/CMSIS/Include/cmsis_armcc_V6.h
+++ /dev/null
@@ -1,1800 +0,0 @@
-/**************************************************************************//**
- * @file cmsis_armcc_V6.h
- * @brief CMSIS Cortex-M Core Function/Instruction Header File
- * @version V4.30
- * @date 20. October 2015
- ******************************************************************************/
-/* Copyright (c) 2009 - 2015 ARM LIMITED
-
- All rights reserved.
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- - Neither the name of ARM nor the names of its contributors may be used
- to endorse or promote products derived from this software without
- specific prior written permission.
- *
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- POSSIBILITY OF SUCH DAMAGE.
- ---------------------------------------------------------------------------*/
-
-
-#ifndef __CMSIS_ARMCC_V6_H
-#define __CMSIS_ARMCC_V6_H
-
-
-/* ########################### Core Function Access ########################### */
-/** \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
- @{
- */
-
-/**
- \brief Enable IRQ Interrupts
- \details Enables IRQ interrupts by clearing the I-bit in the CPSR.
- Can only be executed in Privileged modes.
- */
-__attribute__((always_inline)) __STATIC_INLINE void __enable_irq(void)
-{
- __ASM volatile ("cpsie i" : : : "memory");
-}
-
-
-/**
- \brief Disable IRQ Interrupts
- \details Disables IRQ interrupts by setting the I-bit in the CPSR.
- Can only be executed in Privileged modes.
- */
-__attribute__((always_inline)) __STATIC_INLINE void __disable_irq(void)
-{
- __ASM volatile ("cpsid i" : : : "memory");
-}
-
-
-/**
- \brief Get Control Register
- \details Returns the content of the Control Register.
- \return Control Register value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_CONTROL(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, control" : "=r" (result) );
- return(result);
-}
-
-
-#if (__ARM_FEATURE_CMSE == 3U)
-/**
- \brief Get Control Register (non-secure)
- \details Returns the content of the non-secure Control Register when in secure mode.
- \return non-secure Control Register value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_CONTROL_NS(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, control_ns" : "=r" (result) );
- return(result);
-}
-#endif
-
-
-/**
- \brief Set Control Register
- \details Writes the given value to the Control Register.
- \param [in] control Control Register value to set
- */
-__attribute__((always_inline)) __STATIC_INLINE void __set_CONTROL(uint32_t control)
-{
- __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
-}
-
-
-#if (__ARM_FEATURE_CMSE == 3U)
-/**
- \brief Set Control Register (non-secure)
- \details Writes the given value to the non-secure Control Register when in secure state.
- \param [in] control Control Register value to set
- */
-__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_CONTROL_NS(uint32_t control)
-{
- __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory");
-}
-#endif
-
-
-/**
- \brief Get IPSR Register
- \details Returns the content of the IPSR Register.
- \return IPSR Register value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_IPSR(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
- return(result);
-}
-
-
-#if (__ARM_FEATURE_CMSE == 3U)
-/**
- \brief Get IPSR Register (non-secure)
- \details Returns the content of the non-secure IPSR Register when in secure state.
- \return IPSR Register value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_IPSR_NS(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, ipsr_ns" : "=r" (result) );
- return(result);
-}
-#endif
-
-
-/**
- \brief Get APSR Register
- \details Returns the content of the APSR Register.
- \return APSR Register value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_APSR(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, apsr" : "=r" (result) );
- return(result);
-}
-
-
-#if (__ARM_FEATURE_CMSE == 3U)
-/**
- \brief Get APSR Register (non-secure)
- \details Returns the content of the non-secure APSR Register when in secure state.
- \return APSR Register value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_APSR_NS(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, apsr_ns" : "=r" (result) );
- return(result);
-}
-#endif
-
-
-/**
- \brief Get xPSR Register
- \details Returns the content of the xPSR Register.
- \return xPSR Register value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_xPSR(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
- return(result);
-}
-
-
-#if (__ARM_FEATURE_CMSE == 3U)
-/**
- \brief Get xPSR Register (non-secure)
- \details Returns the content of the non-secure xPSR Register when in secure state.
- \return xPSR Register value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_xPSR_NS(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, xpsr_ns" : "=r" (result) );
- return(result);
-}
-#endif
-
-
-/**
- \brief Get Process Stack Pointer
- \details Returns the current value of the Process Stack Pointer (PSP).
- \return PSP Register value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PSP(void)
-{
- register uint32_t result;
-
- __ASM volatile ("MRS %0, psp" : "=r" (result) );
- return(result);
-}
-
-
-#if (__ARM_FEATURE_CMSE == 3U)
-/**
- \brief Get Process Stack Pointer (non-secure)
- \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state.
- \return PSP Register value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PSP_NS(void)
-{
- register uint32_t result;
-
- __ASM volatile ("MRS %0, psp_ns" : "=r" (result) );
- return(result);
-}
-#endif
-
-
-/**
- \brief Set Process Stack Pointer
- \details Assigns the given value to the Process Stack Pointer (PSP).
- \param [in] topOfProcStack Process Stack Pointer value to set
- */
-__attribute__((always_inline)) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
-{
- __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : "sp");
-}
-
-
-#if (__ARM_FEATURE_CMSE == 3U)
-/**
- \brief Set Process Stack Pointer (non-secure)
- \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state.
- \param [in] topOfProcStack Process Stack Pointer value to set
- */
-__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack)
-{
- __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : "sp");
-}
-#endif
-
-
-/**
- \brief Get Main Stack Pointer
- \details Returns the current value of the Main Stack Pointer (MSP).
- \return MSP Register value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_MSP(void)
-{
- register uint32_t result;
-
- __ASM volatile ("MRS %0, msp" : "=r" (result) );
- return(result);
-}
-
-
-#if (__ARM_FEATURE_CMSE == 3U)
-/**
- \brief Get Main Stack Pointer (non-secure)
- \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state.
- \return MSP Register value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_MSP_NS(void)
-{
- register uint32_t result;
-
- __ASM volatile ("MRS %0, msp_ns" : "=r" (result) );
- return(result);
-}
-#endif
-
-
-/**
- \brief Set Main Stack Pointer
- \details Assigns the given value to the Main Stack Pointer (MSP).
- \param [in] topOfMainStack Main Stack Pointer value to set
- */
-__attribute__((always_inline)) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
-{
- __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : "sp");
-}
-
-
-#if (__ARM_FEATURE_CMSE == 3U)
-/**
- \brief Set Main Stack Pointer (non-secure)
- \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state.
- \param [in] topOfMainStack Main Stack Pointer value to set
- */
-__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack)
-{
- __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : "sp");
-}
-#endif
-
-
-/**
- \brief Get Priority Mask
- \details Returns the current state of the priority mask bit from the Priority Mask Register.
- \return Priority Mask value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PRIMASK(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, primask" : "=r" (result) );
- return(result);
-}
-
-
-#if (__ARM_FEATURE_CMSE == 3U)
-/**
- \brief Get Priority Mask (non-secure)
- \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state.
- \return Priority Mask value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PRIMASK_NS(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, primask_ns" : "=r" (result) );
- return(result);
-}
-#endif
-
-
-/**
- \brief Set Priority Mask
- \details Assigns the given value to the Priority Mask Register.
- \param [in] priMask Priority Mask
- */
-__attribute__((always_inline)) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
-{
- __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
-}
-
-
-#if (__ARM_FEATURE_CMSE == 3U)
-/**
- \brief Set Priority Mask (non-secure)
- \details Assigns the given value to the non-secure Priority Mask Register when in secure state.
- \param [in] priMask Priority Mask
- */
-__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PRIMASK_NS(uint32_t priMask)
-{
- __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory");
-}
-#endif
-
-
-#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */
-
-/**
- \brief Enable FIQ
- \details Enables FIQ interrupts by clearing the F-bit in the CPSR.
- Can only be executed in Privileged modes.
- */
-__attribute__((always_inline)) __STATIC_INLINE void __enable_fault_irq(void)
-{
- __ASM volatile ("cpsie f" : : : "memory");
-}
-
-
-/**
- \brief Disable FIQ
- \details Disables FIQ interrupts by setting the F-bit in the CPSR.
- Can only be executed in Privileged modes.
- */
-__attribute__((always_inline)) __STATIC_INLINE void __disable_fault_irq(void)
-{
- __ASM volatile ("cpsid f" : : : "memory");
-}
-
-
-/**
- \brief Get Base Priority
- \details Returns the current value of the Base Priority register.
- \return Base Priority register value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_BASEPRI(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, basepri" : "=r" (result) );
- return(result);
-}
-
-
-#if (__ARM_FEATURE_CMSE == 3U)
-/**
- \brief Get Base Priority (non-secure)
- \details Returns the current value of the non-secure Base Priority register when in secure state.
- \return Base Priority register value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_BASEPRI_NS(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) );
- return(result);
-}
-#endif
-
-
-/**
- \brief Set Base Priority
- \details Assigns the given value to the Base Priority register.
- \param [in] basePri Base Priority value to set
- */
-__attribute__((always_inline)) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
-{
- __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
-}
-
-
-#if (__ARM_FEATURE_CMSE == 3U)
-/**
- \brief Set Base Priority (non-secure)
- \details Assigns the given value to the non-secure Base Priority register when in secure state.
- \param [in] basePri Base Priority value to set
- */
-__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_BASEPRI_NS(uint32_t value)
-{
- __ASM volatile ("MSR basepri_ns, %0" : : "r" (value) : "memory");
-}
-#endif
-
-
-/**
- \brief Set Base Priority with condition
- \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
- or the new value increases the BASEPRI priority level.
- \param [in] basePri Base Priority value to set
- */
-__attribute__((always_inline)) __STATIC_INLINE void __set_BASEPRI_MAX(uint32_t value)
-{
- __ASM volatile ("MSR basepri_max, %0" : : "r" (value) : "memory");
-}
-
-
-#if (__ARM_FEATURE_CMSE == 3U)
-/**
- \brief Set Base Priority with condition (non_secure)
- \details Assigns the given value to the non-secure Base Priority register when in secure state only if BASEPRI masking is disabled,
- or the new value increases the BASEPRI priority level.
- \param [in] basePri Base Priority value to set
- */
-__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_BASEPRI_MAX_NS(uint32_t value)
-{
- __ASM volatile ("MSR basepri_max_ns, %0" : : "r" (value) : "memory");
-}
-#endif
-
-
-/**
- \brief Get Fault Mask
- \details Returns the current value of the Fault Mask register.
- \return Fault Mask register value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
- return(result);
-}
-
-
-#if (__ARM_FEATURE_CMSE == 3U)
-/**
- \brief Get Fault Mask (non-secure)
- \details Returns the current value of the non-secure Fault Mask register when in secure state.
- \return Fault Mask register value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_FAULTMASK_NS(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) );
- return(result);
-}
-#endif
-
-
-/**
- \brief Set Fault Mask
- \details Assigns the given value to the Fault Mask register.
- \param [in] faultMask Fault Mask value to set
- */
-__attribute__((always_inline)) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
-{
- __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
-}
-
-
-#if (__ARM_FEATURE_CMSE == 3U)
-/**
- \brief Set Fault Mask (non-secure)
- \details Assigns the given value to the non-secure Fault Mask register when in secure state.
- \param [in] faultMask Fault Mask value to set
- */
-__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask)
-{
- __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory");
-}
-#endif
-
-
-#endif /* ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */
-
-
-#if (__ARM_ARCH_8M__ == 1U)
-
-/**
- \brief Get Process Stack Pointer Limit
- \details Returns the current value of the Process Stack Pointer Limit (PSPLIM).
- \return PSPLIM Register value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PSPLIM(void)
-{
- register uint32_t result;
-
- __ASM volatile ("MRS %0, psplim" : "=r" (result) );
- return(result);
-}
-
-
-#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */
-/**
- \brief Get Process Stack Pointer Limit (non-secure)
- \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state.
- \return PSPLIM Register value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PSPLIM_NS(void)
-{
- register uint32_t result;
-
- __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) );
- return(result);
-}
-#endif
-
-
-/**
- \brief Set Process Stack Pointer Limit
- \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM).
- \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set
- */
-__attribute__((always_inline)) __STATIC_INLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit)
-{
- __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit));
-}
-
-
-#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */
-/**
- \brief Set Process Stack Pointer (non-secure)
- \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state.
- \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set
- */
-__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit)
-{
- __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit));
-}
-#endif
-
-
-/**
- \brief Get Main Stack Pointer Limit
- \details Returns the current value of the Main Stack Pointer Limit (MSPLIM).
- \return MSPLIM Register value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_MSPLIM(void)
-{
- register uint32_t result;
-
- __ASM volatile ("MRS %0, msplim" : "=r" (result) );
-
- return(result);
-}
-
-
-#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */
-/**
- \brief Get Main Stack Pointer Limit (non-secure)
- \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state.
- \return MSPLIM Register value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_MSPLIM_NS(void)
-{
- register uint32_t result;
-
- __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) );
- return(result);
-}
-#endif
-
-
-/**
- \brief Set Main Stack Pointer Limit
- \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM).
- \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set
- */
-__attribute__((always_inline)) __STATIC_INLINE void __set_MSPLIM(uint32_t MainStackPtrLimit)
-{
- __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit));
-}
-
-
-#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */
-/**
- \brief Set Main Stack Pointer Limit (non-secure)
- \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state.
- \param [in] MainStackPtrLimit Main Stack Pointer value to set
- */
-__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit)
-{
- __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit));
-}
-#endif
-
-#endif /* (__ARM_ARCH_8M__ == 1U) */
-
-
-#if ((__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=4 */
-
-/**
- \brief Get FPSCR
- \details eturns the current value of the Floating Point Status/Control register.
- \return Floating Point Status/Control register value
- */
-#define __get_FPSCR __builtin_arm_get_fpscr
-#if 0
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_FPSCR(void)
-{
-#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
- uint32_t result;
-
- __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */
- __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
- __ASM volatile ("");
- return(result);
-#else
- return(0);
-#endif
-}
-#endif
-
-#if (__ARM_FEATURE_CMSE == 3U)
-/**
- \brief Get FPSCR (non-secure)
- \details Returns the current value of the non-secure Floating Point Status/Control register when in secure state.
- \return Floating Point Status/Control register value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_FPSCR_NS(void)
-{
-#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
- uint32_t result;
-
- __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */
- __ASM volatile ("VMRS %0, fpscr_ns" : "=r" (result) );
- __ASM volatile ("");
- return(result);
-#else
- return(0);
-#endif
-}
-#endif
-
-
-/**
- \brief Set FPSCR
- \details Assigns the given value to the Floating Point Status/Control register.
- \param [in] fpscr Floating Point Status/Control value to set
- */
-#define __set_FPSCR __builtin_arm_set_fpscr
-#if 0
-__attribute__((always_inline)) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
-{
-#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
- __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */
- __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
- __ASM volatile ("");
-#endif
-}
-#endif
-
-#if (__ARM_FEATURE_CMSE == 3U)
-/**
- \brief Set FPSCR (non-secure)
- \details Assigns the given value to the non-secure Floating Point Status/Control register when in secure state.
- \param [in] fpscr Floating Point Status/Control value to set
- */
-__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_FPSCR_NS(uint32_t fpscr)
-{
-#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
- __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */
- __ASM volatile ("VMSR fpscr_ns, %0" : : "r" (fpscr) : "vfpcc");
- __ASM volatile ("");
-#endif
-}
-#endif
-
-#endif /* ((__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */
-
-
-
-/*@} end of CMSIS_Core_RegAccFunctions */
-
-
-/* ########################## Core Instruction Access ######################### */
-/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
- Access to dedicated instructions
- @{
-*/
-
-/* Define macros for porting to both thumb1 and thumb2.
- * For thumb1, use low register (r0-r7), specified by constraint "l"
- * Otherwise, use general registers, specified by constraint "r" */
-#if defined (__thumb__) && !defined (__thumb2__)
-#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
-#define __CMSIS_GCC_USE_REG(r) "l" (r)
-#else
-#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
-#define __CMSIS_GCC_USE_REG(r) "r" (r)
-#endif
-
-/**
- \brief No Operation
- \details No Operation does nothing. This instruction can be used for code alignment purposes.
- */
-#define __NOP __builtin_arm_nop
-
-/**
- \brief Wait For Interrupt
- \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
- */
-#define __WFI __builtin_arm_wfi
-
-
-/**
- \brief Wait For Event
- \details Wait For Event is a hint instruction that permits the processor to enter
- a low-power state until one of a number of events occurs.
- */
-#define __WFE __builtin_arm_wfe
-
-
-/**
- \brief Send Event
- \details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
- */
-#define __SEV __builtin_arm_sev
-
-
-/**
- \brief Instruction Synchronization Barrier
- \details Instruction Synchronization Barrier flushes the pipeline in the processor,
- so that all instructions following the ISB are fetched from cache or memory,
- after the instruction has been completed.
- */
-#define __ISB() __builtin_arm_isb(0xF);
-
-/**
- \brief Data Synchronization Barrier
- \details Acts as a special kind of Data Memory Barrier.
- It completes when all explicit memory accesses before this instruction complete.
- */
-#define __DSB() __builtin_arm_dsb(0xF);
-
-
-/**
- \brief Data Memory Barrier
- \details Ensures the apparent order of the explicit memory operations before
- and after the instruction, without ensuring their completion.
- */
-#define __DMB() __builtin_arm_dmb(0xF);
-
-
-/**
- \brief Reverse byte order (32 bit)
- \details Reverses the byte order in integer value.
- \param [in] value Value to reverse
- \return Reversed value
- */
-#define __REV __builtin_bswap32
-
-
-/**
- \brief Reverse byte order (16 bit)
- \details Reverses the byte order in two unsigned short values.
- \param [in] value Value to reverse
- \return Reversed value
- */
-#define __REV16 __builtin_bswap16 /* ToDo: ARMCC_V6: check if __builtin_bswap16 could be used */
-#if 0
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV16(uint32_t value)
-{
- uint32_t result;
-
- __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
- return(result);
-}
-#endif
-
-
-/**
- \brief Reverse byte order in signed short value
- \details Reverses the byte order in a signed short value with sign extension to integer.
- \param [in] value Value to reverse
- \return Reversed value
- */
- /* ToDo: ARMCC_V6: check if __builtin_bswap16 could be used */
-__attribute__((always_inline)) __STATIC_INLINE int32_t __REVSH(int32_t value)
-{
- int32_t result;
-
- __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
- return(result);
-}
-
-
-/**
- \brief Rotate Right in unsigned value (32 bit)
- \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
- \param [in] op1 Value to rotate
- \param [in] op2 Number of Bits to rotate
- \return Rotated value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
-{
- return (op1 >> op2) | (op1 << (32U - op2));
-}
-
-
-/**
- \brief Breakpoint
- \details Causes the processor to enter Debug state.
- Debug tools can use this to investigate system state when the instruction at a particular address is reached.
- \param [in] value is ignored by the processor.
- If required, a debugger can use it to store additional information about the breakpoint.
- */
-#define __BKPT(value) __ASM volatile ("bkpt "#value)
-
-
-/**
- \brief Reverse bit order of value
- \details Reverses the bit order of the given value.
- \param [in] value Value to reverse
- \return Reversed value
- */
- /* ToDo: ARMCC_V6: check if __builtin_arm_rbit is supported */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
-{
- uint32_t result;
-
-#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */
- __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
-#else
- int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */
-
- result = value; /* r will be reversed bits of v; first get LSB of v */
- for (value >>= 1U; value; value >>= 1U)
- {
- result <<= 1U;
- result |= value & 1U;
- s--;
- }
- result <<= s; /* shift when v's highest bits are zero */
-#endif
- return(result);
-}
-
-
-/**
- \brief Count leading zeros
- \details Counts the number of leading zeros of a data value.
- \param [in] value Value to count the leading zeros
- \return number of leading zeros in value
- */
-#define __CLZ __builtin_clz
-
-
-#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */
-
-/**
- \brief LDR Exclusive (8 bit)
- \details Executes a exclusive LDR instruction for 8 bit value.
- \param [in] ptr Pointer to data
- \return value of type uint8_t at (*ptr)
- */
-#define __LDREXB (uint8_t)__builtin_arm_ldrex
-
-
-/**
- \brief LDR Exclusive (16 bit)
- \details Executes a exclusive LDR instruction for 16 bit values.
- \param [in] ptr Pointer to data
- \return value of type uint16_t at (*ptr)
- */
-#define __LDREXH (uint16_t)__builtin_arm_ldrex
-
-
-/**
- \brief LDR Exclusive (32 bit)
- \details Executes a exclusive LDR instruction for 32 bit values.
- \param [in] ptr Pointer to data
- \return value of type uint32_t at (*ptr)
- */
-#define __LDREXW (uint32_t)__builtin_arm_ldrex
-
-
-/**
- \brief STR Exclusive (8 bit)
- \details Executes a exclusive STR instruction for 8 bit values.
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- \return 0 Function succeeded
- \return 1 Function failed
- */
-#define __STREXB (uint32_t)__builtin_arm_strex
-
-
-/**
- \brief STR Exclusive (16 bit)
- \details Executes a exclusive STR instruction for 16 bit values.
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- \return 0 Function succeeded
- \return 1 Function failed
- */
-#define __STREXH (uint32_t)__builtin_arm_strex
-
-
-/**
- \brief STR Exclusive (32 bit)
- \details Executes a exclusive STR instruction for 32 bit values.
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- \return 0 Function succeeded
- \return 1 Function failed
- */
-#define __STREXW (uint32_t)__builtin_arm_strex
-
-
-/**
- \brief Remove the exclusive lock
- \details Removes the exclusive lock which is created by LDREX.
- */
-#define __CLREX __builtin_arm_clrex
-
-
-/**
- \brief Signed Saturate
- \details Saturates a signed value.
- \param [in] value Value to be saturated
- \param [in] sat Bit position to saturate to (1..32)
- \return Saturated value
- */
-/*#define __SSAT __builtin_arm_ssat*/
-#define __SSAT(ARG1,ARG2) \
-({ \
- int32_t __RES, __ARG1 = (ARG1); \
- __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
- __RES; \
- })
-
-
-/**
- \brief Unsigned Saturate
- \details Saturates an unsigned value.
- \param [in] value Value to be saturated
- \param [in] sat Bit position to saturate to (0..31)
- \return Saturated value
- */
-#define __USAT __builtin_arm_usat
-#if 0
-#define __USAT(ARG1,ARG2) \
-({ \
- uint32_t __RES, __ARG1 = (ARG1); \
- __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
- __RES; \
- })
-#endif
-
-
-/**
- \brief Rotate Right with Extend (32 bit)
- \details Moves each bit of a bitstring right by one bit.
- The carry input is shifted in at the left end of the bitstring.
- \param [in] value Value to rotate
- \return Rotated value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __RRX(uint32_t value)
-{
- uint32_t result;
-
- __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
- return(result);
-}
-
-
-/**
- \brief LDRT Unprivileged (8 bit)
- \details Executes a Unprivileged LDRT instruction for 8 bit value.
- \param [in] ptr Pointer to data
- \return value of type uint8_t at (*ptr)
- */
-__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDRBT(volatile uint8_t *ptr)
-{
- uint32_t result;
-
- __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) );
- return ((uint8_t) result); /* Add explicit type cast here */
-}
-
-
-/**
- \brief LDRT Unprivileged (16 bit)
- \details Executes a Unprivileged LDRT instruction for 16 bit values.
- \param [in] ptr Pointer to data
- \return value of type uint16_t at (*ptr)
- */
-__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDRHT(volatile uint16_t *ptr)
-{
- uint32_t result;
-
- __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) );
- return ((uint16_t) result); /* Add explicit type cast here */
-}
-
-
-/**
- \brief LDRT Unprivileged (32 bit)
- \details Executes a Unprivileged LDRT instruction for 32 bit values.
- \param [in] ptr Pointer to data
- \return value of type uint32_t at (*ptr)
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDRT(volatile uint32_t *ptr)
-{
- uint32_t result;
-
- __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) );
- return(result);
-}
-
-
-/**
- \brief STRT Unprivileged (8 bit)
- \details Executes a Unprivileged STRT instruction for 8 bit values.
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- */
-__attribute__((always_inline)) __STATIC_INLINE void __STRBT(uint8_t value, volatile uint8_t *ptr)
-{
- __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
-}
-
-
-/**
- \brief STRT Unprivileged (16 bit)
- \details Executes a Unprivileged STRT instruction for 16 bit values.
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- */
-__attribute__((always_inline)) __STATIC_INLINE void __STRHT(uint16_t value, volatile uint16_t *ptr)
-{
- __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
-}
-
-
-/**
- \brief STRT Unprivileged (32 bit)
- \details Executes a Unprivileged STRT instruction for 32 bit values.
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- */
-__attribute__((always_inline)) __STATIC_INLINE void __STRT(uint32_t value, volatile uint32_t *ptr)
-{
- __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) );
-}
-
-#endif /* ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */
-
-
-#if (__ARM_ARCH_8M__ == 1U)
-
-/**
- \brief Load-Acquire (8 bit)
- \details Executes a LDAB instruction for 8 bit value.
- \param [in] ptr Pointer to data
- \return value of type uint8_t at (*ptr)
- */
-__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDAB(volatile uint8_t *ptr)
-{
- uint32_t result;
-
- __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) );
- return ((uint8_t) result);
-}
-
-
-/**
- \brief Load-Acquire (16 bit)
- \details Executes a LDAH instruction for 16 bit values.
- \param [in] ptr Pointer to data
- \return value of type uint16_t at (*ptr)
- */
-__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDAH(volatile uint16_t *ptr)
-{
- uint32_t result;
-
- __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) );
- return ((uint16_t) result);
-}
-
-
-/**
- \brief Load-Acquire (32 bit)
- \details Executes a LDA instruction for 32 bit values.
- \param [in] ptr Pointer to data
- \return value of type uint32_t at (*ptr)
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDA(volatile uint32_t *ptr)
-{
- uint32_t result;
-
- __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) );
- return(result);
-}
-
-
-/**
- \brief Store-Release (8 bit)
- \details Executes a STLB instruction for 8 bit values.
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- */
-__attribute__((always_inline)) __STATIC_INLINE void __STLB(uint8_t value, volatile uint8_t *ptr)
-{
- __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
-}
-
-
-/**
- \brief Store-Release (16 bit)
- \details Executes a STLH instruction for 16 bit values.
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- */
-__attribute__((always_inline)) __STATIC_INLINE void __STLH(uint16_t value, volatile uint16_t *ptr)
-{
- __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
-}
-
-
-/**
- \brief Store-Release (32 bit)
- \details Executes a STL instruction for 32 bit values.
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- */
-__attribute__((always_inline)) __STATIC_INLINE void __STL(uint32_t value, volatile uint32_t *ptr)
-{
- __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) );
-}
-
-
-/**
- \brief Load-Acquire Exclusive (8 bit)
- \details Executes a LDAB exclusive instruction for 8 bit value.
- \param [in] ptr Pointer to data
- \return value of type uint8_t at (*ptr)
- */
-#define __LDAEXB (uint8_t)__builtin_arm_ldaex
-
-
-/**
- \brief Load-Acquire Exclusive (16 bit)
- \details Executes a LDAH exclusive instruction for 16 bit values.
- \param [in] ptr Pointer to data
- \return value of type uint16_t at (*ptr)
- */
-#define __LDAEXH (uint16_t)__builtin_arm_ldaex
-
-
-/**
- \brief Load-Acquire Exclusive (32 bit)
- \details Executes a LDA exclusive instruction for 32 bit values.
- \param [in] ptr Pointer to data
- \return value of type uint32_t at (*ptr)
- */
-#define __LDAEX (uint32_t)__builtin_arm_ldaex
-
-
-/**
- \brief Store-Release Exclusive (8 bit)
- \details Executes a STLB exclusive instruction for 8 bit values.
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- \return 0 Function succeeded
- \return 1 Function failed
- */
-#define __STLEXB (uint32_t)__builtin_arm_stlex
-
-
-/**
- \brief Store-Release Exclusive (16 bit)
- \details Executes a STLH exclusive instruction for 16 bit values.
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- \return 0 Function succeeded
- \return 1 Function failed
- */
-#define __STLEXH (uint32_t)__builtin_arm_stlex
-
-
-/**
- \brief Store-Release Exclusive (32 bit)
- \details Executes a STL exclusive instruction for 32 bit values.
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- \return 0 Function succeeded
- \return 1 Function failed
- */
-#define __STLEX (uint32_t)__builtin_arm_stlex
-
-#endif /* (__ARM_ARCH_8M__ == 1U) */
-
-/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
-
-
-/* ################### Compiler specific Intrinsics ########################### */
-/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
- Access to dedicated SIMD instructions
- @{
-*/
-
-#if (__ARM_FEATURE_DSP == 1U) /* ToDo: ARMCC_V6: This should be ARCH >= ARMv7-M + SIMD */
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
-{
- uint32_t result;
-
- __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
- return(result);
-}
-
-#define __SSAT16(ARG1,ARG2) \
-({ \
- uint32_t __RES, __ARG1 = (ARG1); \
- __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
- __RES; \
- })
-
-#define __USAT16(ARG1,ARG2) \
-({ \
- uint32_t __RES, __ARG1 = (ARG1); \
- __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
- __RES; \
- })
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
-{
- uint32_t result;
-
- __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
-{
- uint32_t result;
-
- __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
-{
- uint32_t result;
-
- __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
-{
- uint32_t result;
-
- __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc)
-{
- union llreg_u{
- uint32_t w32[2];
- uint64_t w64;
- } llr;
- llr.w64 = acc;
-
-#ifndef __ARMEB__ /* Little endian */
- __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
-#else /* Big endian */
- __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
-#endif
-
- return(llr.w64);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc)
-{
- union llreg_u{
- uint32_t w32[2];
- uint64_t w64;
- } llr;
- llr.w64 = acc;
-
-#ifndef __ARMEB__ /* Little endian */
- __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
-#else /* Big endian */
- __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
-#endif
-
- return(llr.w64);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
-{
- uint32_t result;
-
- __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
-{
- uint32_t result;
-
- __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc)
-{
- union llreg_u{
- uint32_t w32[2];
- uint64_t w64;
- } llr;
- llr.w64 = acc;
-
-#ifndef __ARMEB__ /* Little endian */
- __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
-#else /* Big endian */
- __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
-#endif
-
- return(llr.w64);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc)
-{
- union llreg_u{
- uint32_t w32[2];
- uint64_t w64;
- } llr;
- llr.w64 = acc;
-
-#ifndef __ARMEB__ /* Little endian */
- __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
-#else /* Big endian */
- __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
-#endif
-
- return(llr.w64);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE int32_t __QADD( int32_t op1, int32_t op2)
-{
- int32_t result;
-
- __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__((always_inline)) __STATIC_INLINE int32_t __QSUB( int32_t op1, int32_t op2)
-{
- int32_t result;
-
- __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-#define __PKHBT(ARG1,ARG2,ARG3) \
-({ \
- uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
- __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
- __RES; \
- })
-
-#define __PKHTB(ARG1,ARG2,ARG3) \
-({ \
- uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
- if (ARG3 == 0) \
- __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
- else \
- __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
- __RES; \
- })
-
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
-{
- int32_t result;
-
- __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
- return(result);
-}
-
-#endif /* (__ARM_FEATURE_DSP == 1U) */
-/*@} end of group CMSIS_SIMD_intrinsics */
-
-
-#endif /* __CMSIS_ARMCC_V6_H */
diff --git a/stm32cubemx/Drivers/CMSIS/Include/cmsis_gcc.h b/stm32cubemx/Drivers/CMSIS/Include/cmsis_gcc.h
deleted file mode 100644
index bb89fbb..0000000
--- a/stm32cubemx/Drivers/CMSIS/Include/cmsis_gcc.h
+++ /dev/null
@@ -1,1373 +0,0 @@
-/**************************************************************************//**
- * @file cmsis_gcc.h
- * @brief CMSIS Cortex-M Core Function/Instruction Header File
- * @version V4.30
- * @date 20. October 2015
- ******************************************************************************/
-/* Copyright (c) 2009 - 2015 ARM LIMITED
-
- All rights reserved.
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- - Neither the name of ARM nor the names of its contributors may be used
- to endorse or promote products derived from this software without
- specific prior written permission.
- *
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- POSSIBILITY OF SUCH DAMAGE.
- ---------------------------------------------------------------------------*/
-
-
-#ifndef __CMSIS_GCC_H
-#define __CMSIS_GCC_H
-
-/* ignore some GCC warnings */
-#if defined ( __GNUC__ )
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wsign-conversion"
-#pragma GCC diagnostic ignored "-Wconversion"
-#pragma GCC diagnostic ignored "-Wunused-parameter"
-#endif
-
-
-/* ########################### Core Function Access ########################### */
-/** \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
- @{
- */
-
-/**
- \brief Enable IRQ Interrupts
- \details Enables IRQ interrupts by clearing the I-bit in the CPSR.
- Can only be executed in Privileged modes.
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
-{
- __ASM volatile ("cpsie i" : : : "memory");
-}
-
-
-/**
- \brief Disable IRQ Interrupts
- \details Disables IRQ interrupts by setting the I-bit in the CPSR.
- Can only be executed in Privileged modes.
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
-{
- __ASM volatile ("cpsid i" : : : "memory");
-}
-
-
-/**
- \brief Get Control Register
- \details Returns the content of the Control Register.
- \return Control Register value
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, control" : "=r" (result) );
- return(result);
-}
-
-
-/**
- \brief Set Control Register
- \details Writes the given value to the Control Register.
- \param [in] control Control Register value to set
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
-{
- __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
-}
-
-
-/**
- \brief Get IPSR Register
- \details Returns the content of the IPSR Register.
- \return IPSR Register value
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
- return(result);
-}
-
-
-/**
- \brief Get APSR Register
- \details Returns the content of the APSR Register.
- \return APSR Register value
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, apsr" : "=r" (result) );
- return(result);
-}
-
-
-/**
- \brief Get xPSR Register
- \details Returns the content of the xPSR Register.
-
- \return xPSR Register value
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
- return(result);
-}
-
-
-/**
- \brief Get Process Stack Pointer
- \details Returns the current value of the Process Stack Pointer (PSP).
- \return PSP Register value
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
-{
- register uint32_t result;
-
- __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
- return(result);
-}
-
-
-/**
- \brief Set Process Stack Pointer
- \details Assigns the given value to the Process Stack Pointer (PSP).
- \param [in] topOfProcStack Process Stack Pointer value to set
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
-{
- __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
-}
-
-
-/**
- \brief Get Main Stack Pointer
- \details Returns the current value of the Main Stack Pointer (MSP).
- \return MSP Register value
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
-{
- register uint32_t result;
-
- __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
- return(result);
-}
-
-
-/**
- \brief Set Main Stack Pointer
- \details Assigns the given value to the Main Stack Pointer (MSP).
-
- \param [in] topOfMainStack Main Stack Pointer value to set
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
-{
- __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
-}
-
-
-/**
- \brief Get Priority Mask
- \details Returns the current state of the priority mask bit from the Priority Mask Register.
- \return Priority Mask value
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, primask" : "=r" (result) );
- return(result);
-}
-
-
-/**
- \brief Set Priority Mask
- \details Assigns the given value to the Priority Mask Register.
- \param [in] priMask Priority Mask
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
-{
- __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
-}
-
-
-#if (__CORTEX_M >= 0x03U)
-
-/**
- \brief Enable FIQ
- \details Enables FIQ interrupts by clearing the F-bit in the CPSR.
- Can only be executed in Privileged modes.
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
-{
- __ASM volatile ("cpsie f" : : : "memory");
-}
-
-
-/**
- \brief Disable FIQ
- \details Disables FIQ interrupts by setting the F-bit in the CPSR.
- Can only be executed in Privileged modes.
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
-{
- __ASM volatile ("cpsid f" : : : "memory");
-}
-
-
-/**
- \brief Get Base Priority
- \details Returns the current value of the Base Priority register.
- \return Base Priority register value
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, basepri" : "=r" (result) );
- return(result);
-}
-
-
-/**
- \brief Set Base Priority
- \details Assigns the given value to the Base Priority register.
- \param [in] basePri Base Priority value to set
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
-{
- __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
-}
-
-
-/**
- \brief Set Base Priority with condition
- \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
- or the new value increases the BASEPRI priority level.
- \param [in] basePri Base Priority value to set
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI_MAX(uint32_t value)
-{
- __ASM volatile ("MSR basepri_max, %0" : : "r" (value) : "memory");
-}
-
-
-/**
- \brief Get Fault Mask
- \details Returns the current value of the Fault Mask register.
- \return Fault Mask register value
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
-{
- uint32_t result;
-
- __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
- return(result);
-}
-
-
-/**
- \brief Set Fault Mask
- \details Assigns the given value to the Fault Mask register.
- \param [in] faultMask Fault Mask value to set
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
-{
- __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
-}
-
-#endif /* (__CORTEX_M >= 0x03U) */
-
-
-#if (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U)
-
-/**
- \brief Get FPSCR
- \details Returns the current value of the Floating Point Status/Control register.
- \return Floating Point Status/Control register value
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
-{
-#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
- uint32_t result;
-
- /* Empty asm statement works as a scheduling barrier */
- __ASM volatile ("");
- __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
- __ASM volatile ("");
- return(result);
-#else
- return(0);
-#endif
-}
-
-
-/**
- \brief Set FPSCR
- \details Assigns the given value to the Floating Point Status/Control register.
- \param [in] fpscr Floating Point Status/Control value to set
- */
-__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
-{
-#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U)
- /* Empty asm statement works as a scheduling barrier */
- __ASM volatile ("");
- __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
- __ASM volatile ("");
-#endif
-}
-
-#endif /* (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U) */
-
-
-
-/*@} end of CMSIS_Core_RegAccFunctions */
-
-
-/* ########################## Core Instruction Access ######################### */
-/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
- Access to dedicated instructions
- @{
-*/
-
-/* Define macros for porting to both thumb1 and thumb2.
- * For thumb1, use low register (r0-r7), specified by constraint "l"
- * Otherwise, use general registers, specified by constraint "r" */
-#if defined (__thumb__) && !defined (__thumb2__)
-#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
-#define __CMSIS_GCC_USE_REG(r) "l" (r)
-#else
-#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
-#define __CMSIS_GCC_USE_REG(r) "r" (r)
-#endif
-
-/**
- \brief No Operation
- \details No Operation does nothing. This instruction can be used for code alignment purposes.
- */
-__attribute__((always_inline)) __STATIC_INLINE void __NOP(void)
-{
- __ASM volatile ("nop");
-}
-
-
-/**
- \brief Wait For Interrupt
- \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
- */
-__attribute__((always_inline)) __STATIC_INLINE void __WFI(void)
-{
- __ASM volatile ("wfi");
-}
-
-
-/**
- \brief Wait For Event
- \details Wait For Event is a hint instruction that permits the processor to enter
- a low-power state until one of a number of events occurs.
- */
-__attribute__((always_inline)) __STATIC_INLINE void __WFE(void)
-{
- __ASM volatile ("wfe");
-}
-
-
-/**
- \brief Send Event
- \details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
- */
-__attribute__((always_inline)) __STATIC_INLINE void __SEV(void)
-{
- __ASM volatile ("sev");
-}
-
-
-/**
- \brief Instruction Synchronization Barrier
- \details Instruction Synchronization Barrier flushes the pipeline in the processor,
- so that all instructions following the ISB are fetched from cache or memory,
- after the instruction has been completed.
- */
-__attribute__((always_inline)) __STATIC_INLINE void __ISB(void)
-{
- __ASM volatile ("isb 0xF":::"memory");
-}
-
-
-/**
- \brief Data Synchronization Barrier
- \details Acts as a special kind of Data Memory Barrier.
- It completes when all explicit memory accesses before this instruction complete.
- */
-__attribute__((always_inline)) __STATIC_INLINE void __DSB(void)
-{
- __ASM volatile ("dsb 0xF":::"memory");
-}
-
-
-/**
- \brief Data Memory Barrier
- \details Ensures the apparent order of the explicit memory operations before
- and after the instruction, without ensuring their completion.
- */
-__attribute__((always_inline)) __STATIC_INLINE void __DMB(void)
-{
- __ASM volatile ("dmb 0xF":::"memory");
-}
-
-
-/**
- \brief Reverse byte order (32 bit)
- \details Reverses the byte order in integer value.
- \param [in] value Value to reverse
- \return Reversed value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV(uint32_t value)
-{
-#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
- return __builtin_bswap32(value);
-#else
- uint32_t result;
-
- __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
- return(result);
-#endif
-}
-
-
-/**
- \brief Reverse byte order (16 bit)
- \details Reverses the byte order in two unsigned short values.
- \param [in] value Value to reverse
- \return Reversed value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV16(uint32_t value)
-{
- uint32_t result;
-
- __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
- return(result);
-}
-
-
-/**
- \brief Reverse byte order in signed short value
- \details Reverses the byte order in a signed short value with sign extension to integer.
- \param [in] value Value to reverse
- \return Reversed value
- */
-__attribute__((always_inline)) __STATIC_INLINE int32_t __REVSH(int32_t value)
-{
-#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
- return (short)__builtin_bswap16(value);
-#else
- int32_t result;
-
- __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
- return(result);
-#endif
-}
-
-
-/**
- \brief Rotate Right in unsigned value (32 bit)
- \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
- \param [in] value Value to rotate
- \param [in] value Number of Bits to rotate
- \return Rotated value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
-{
- return (op1 >> op2) | (op1 << (32U - op2));
-}
-
-
-/**
- \brief Breakpoint
- \details Causes the processor to enter Debug state.
- Debug tools can use this to investigate system state when the instruction at a particular address is reached.
- \param [in] value is ignored by the processor.
- If required, a debugger can use it to store additional information about the breakpoint.
- */
-#define __BKPT(value) __ASM volatile ("bkpt "#value)
-
-
-/**
- \brief Reverse bit order of value
- \details Reverses the bit order of the given value.
- \param [in] value Value to reverse
- \return Reversed value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
-{
- uint32_t result;
-
-#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
- __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
-#else
- int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */
-
- result = value; /* r will be reversed bits of v; first get LSB of v */
- for (value >>= 1U; value; value >>= 1U)
- {
- result <<= 1U;
- result |= value & 1U;
- s--;
- }
- result <<= s; /* shift when v's highest bits are zero */
-#endif
- return(result);
-}
-
-
-/**
- \brief Count leading zeros
- \details Counts the number of leading zeros of a data value.
- \param [in] value Value to count the leading zeros
- \return number of leading zeros in value
- */
-#define __CLZ __builtin_clz
-
-
-#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U)
-
-/**
- \brief LDR Exclusive (8 bit)
- \details Executes a exclusive LDR instruction for 8 bit value.
- \param [in] ptr Pointer to data
- \return value of type uint8_t at (*ptr)
- */
-__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
-{
- uint32_t result;
-
-#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
- __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
-#else
- /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
- accepted by assembler. So has to use following less efficient pattern.
- */
- __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
-#endif
- return ((uint8_t) result); /* Add explicit type cast here */
-}
-
-
-/**
- \brief LDR Exclusive (16 bit)
- \details Executes a exclusive LDR instruction for 16 bit values.
- \param [in] ptr Pointer to data
- \return value of type uint16_t at (*ptr)
- */
-__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
-{
- uint32_t result;
-
-#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
- __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
-#else
- /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
- accepted by assembler. So has to use following less efficient pattern.
- */
- __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
-#endif
- return ((uint16_t) result); /* Add explicit type cast here */
-}
-
-
-/**
- \brief LDR Exclusive (32 bit)
- \details Executes a exclusive LDR instruction for 32 bit values.
- \param [in] ptr Pointer to data
- \return value of type uint32_t at (*ptr)
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
-{
- uint32_t result;
-
- __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
- return(result);
-}
-
-
-/**
- \brief STR Exclusive (8 bit)
- \details Executes a exclusive STR instruction for 8 bit values.
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- \return 0 Function succeeded
- \return 1 Function failed
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
-{
- uint32_t result;
-
- __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) );
- return(result);
-}
-
-
-/**
- \brief STR Exclusive (16 bit)
- \details Executes a exclusive STR instruction for 16 bit values.
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- \return 0 Function succeeded
- \return 1 Function failed
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
-{
- uint32_t result;
-
- __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) );
- return(result);
-}
-
-
-/**
- \brief STR Exclusive (32 bit)
- \details Executes a exclusive STR instruction for 32 bit values.
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- \return 0 Function succeeded
- \return 1 Function failed
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
-{
- uint32_t result;
-
- __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
- return(result);
-}
-
-
-/**
- \brief Remove the exclusive lock
- \details Removes the exclusive lock which is created by LDREX.
- */
-__attribute__((always_inline)) __STATIC_INLINE void __CLREX(void)
-{
- __ASM volatile ("clrex" ::: "memory");
-}
-
-
-/**
- \brief Signed Saturate
- \details Saturates a signed value.
- \param [in] value Value to be saturated
- \param [in] sat Bit position to saturate to (1..32)
- \return Saturated value
- */
-#define __SSAT(ARG1,ARG2) \
-({ \
- uint32_t __RES, __ARG1 = (ARG1); \
- __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
- __RES; \
- })
-
-
-/**
- \brief Unsigned Saturate
- \details Saturates an unsigned value.
- \param [in] value Value to be saturated
- \param [in] sat Bit position to saturate to (0..31)
- \return Saturated value
- */
-#define __USAT(ARG1,ARG2) \
-({ \
- uint32_t __RES, __ARG1 = (ARG1); \
- __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
- __RES; \
- })
-
-
-/**
- \brief Rotate Right with Extend (32 bit)
- \details Moves each bit of a bitstring right by one bit.
- The carry input is shifted in at the left end of the bitstring.
- \param [in] value Value to rotate
- \return Rotated value
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __RRX(uint32_t value)
-{
- uint32_t result;
-
- __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
- return(result);
-}
-
-
-/**
- \brief LDRT Unprivileged (8 bit)
- \details Executes a Unprivileged LDRT instruction for 8 bit value.
- \param [in] ptr Pointer to data
- \return value of type uint8_t at (*ptr)
- */
-__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDRBT(volatile uint8_t *addr)
-{
- uint32_t result;
-
-#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
- __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*addr) );
-#else
- /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
- accepted by assembler. So has to use following less efficient pattern.
- */
- __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
-#endif
- return ((uint8_t) result); /* Add explicit type cast here */
-}
-
-
-/**
- \brief LDRT Unprivileged (16 bit)
- \details Executes a Unprivileged LDRT instruction for 16 bit values.
- \param [in] ptr Pointer to data
- \return value of type uint16_t at (*ptr)
- */
-__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDRHT(volatile uint16_t *addr)
-{
- uint32_t result;
-
-#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
- __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*addr) );
-#else
- /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
- accepted by assembler. So has to use following less efficient pattern.
- */
- __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
-#endif
- return ((uint16_t) result); /* Add explicit type cast here */
-}
-
-
-/**
- \brief LDRT Unprivileged (32 bit)
- \details Executes a Unprivileged LDRT instruction for 32 bit values.
- \param [in] ptr Pointer to data
- \return value of type uint32_t at (*ptr)
- */
-__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDRT(volatile uint32_t *addr)
-{
- uint32_t result;
-
- __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*addr) );
- return(result);
-}
-
-
-/**
- \brief STRT Unprivileged (8 bit)
- \details Executes a Unprivileged STRT instruction for 8 bit values.
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- */
-__attribute__((always_inline)) __STATIC_INLINE void __STRBT(uint8_t value, volatile uint8_t *addr)
-{
- __ASM volatile ("strbt %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) );
-}
-
-
-/**
- \brief STRT Unprivileged (16 bit)
- \details Executes a Unprivileged STRT instruction for 16 bit values.
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- */
-__attribute__((always_inline)) __STATIC_INLINE void __STRHT(uint16_t value, volatile uint16_t *addr)
-{
- __ASM volatile ("strht %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) );
-}
-
-
-/**
- \brief STRT Unprivileged (32 bit)
- \details Executes a Unprivileged STRT instruction for 32 bit values.
- \param [in] value Value to store
- \param [in] ptr Pointer to location
- */
-__attribute__((always_inline)) __STATIC_INLINE void __STRT(uint32_t value, volatile uint32_t *addr)
-{
- __ASM volatile ("strt %1, %0" : "=Q" (*addr) : "r" (value) );
-}
-
-#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */
-
-/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
-
-
-/* ################### Compiler specific Intrinsics ########################### */
-/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
- Access to dedicated SIMD instructions
- @{
-*/
-
-#if (__CORTEX_M >= 0x04U) /* only for Cortex-M4 and above */
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
-{
- uint32_t result;
-
- __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
- return(result);
-}
-
-#define __SSAT16(ARG1,ARG2) \
-({ \
- int32_t __RES, __ARG1 = (ARG1); \
- __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
- __RES; \
- })
-
-#define __USAT16(ARG1,ARG2) \
-({ \
- uint32_t __RES, __ARG1 = (ARG1); \
- __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
- __RES; \
- })
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
-{
- uint32_t result;
-
- __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
-{
- uint32_t result;
-
- __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
-{
- uint32_t result;
-
- __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
-{
- uint32_t result;
-
- __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc)
-{
- union llreg_u{
- uint32_t w32[2];
- uint64_t w64;
- } llr;
- llr.w64 = acc;
-
-#ifndef __ARMEB__ /* Little endian */
- __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
-#else /* Big endian */
- __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
-#endif
-
- return(llr.w64);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc)
-{
- union llreg_u{
- uint32_t w32[2];
- uint64_t w64;
- } llr;
- llr.w64 = acc;
-
-#ifndef __ARMEB__ /* Little endian */
- __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
-#else /* Big endian */
- __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
-#endif
-
- return(llr.w64);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
-{
- uint32_t result;
-
- __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
-{
- uint32_t result;
-
- __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc)
-{
- union llreg_u{
- uint32_t w32[2];
- uint64_t w64;
- } llr;
- llr.w64 = acc;
-
-#ifndef __ARMEB__ /* Little endian */
- __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
-#else /* Big endian */
- __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
-#endif
-
- return(llr.w64);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc)
-{
- union llreg_u{
- uint32_t w32[2];
- uint64_t w64;
- } llr;
- llr.w64 = acc;
-
-#ifndef __ARMEB__ /* Little endian */
- __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
-#else /* Big endian */
- __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
-#endif
-
- return(llr.w64);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
-{
- uint32_t result;
-
- __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __QADD( int32_t op1, int32_t op2)
-{
- int32_t result;
-
- __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __QSUB( int32_t op1, int32_t op2)
-{
- int32_t result;
-
- __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
- return(result);
-}
-
-#define __PKHBT(ARG1,ARG2,ARG3) \
-({ \
- uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
- __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
- __RES; \
- })
-
-#define __PKHTB(ARG1,ARG2,ARG3) \
-({ \
- uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
- if (ARG3 == 0) \
- __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
- else \
- __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
- __RES; \
- })
-
-__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
-{
- int32_t result;
-
- __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
- return(result);
-}
-
-#endif /* (__CORTEX_M >= 0x04) */
-/*@} end of group CMSIS_SIMD_intrinsics */
-
-
-#if defined ( __GNUC__ )
-#pragma GCC diagnostic pop
-#endif
-
-#endif /* __CMSIS_GCC_H */
diff --git a/stm32cubemx/Drivers/CMSIS/Include/core_cm0.h b/stm32cubemx/Drivers/CMSIS/Include/core_cm0.h
deleted file mode 100644
index 711dad5..0000000
--- a/stm32cubemx/Drivers/CMSIS/Include/core_cm0.h
+++ /dev/null
@@ -1,798 +0,0 @@
-/**************************************************************************//**
- * @file core_cm0.h
- * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
- * @version V4.30
- * @date 20. October 2015
- ******************************************************************************/
-/* Copyright (c) 2009 - 2015 ARM LIMITED
-
- All rights reserved.
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- - Neither the name of ARM nor the names of its contributors may be used
- to endorse or promote products derived from this software without
- specific prior written permission.
- *
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- POSSIBILITY OF SUCH DAMAGE.
- ---------------------------------------------------------------------------*/
-
-
-#if defined ( __ICCARM__ )
- #pragma system_include /* treat file as system include file for MISRA check */
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #pragma clang system_header /* treat file as system include file */
-#endif
-
-#ifndef __CORE_CM0_H_GENERIC
-#define __CORE_CM0_H_GENERIC
-
-#include <stdint.h>
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/**
- \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
- CMSIS violates the following MISRA-C:2004 rules:
-
- \li Required Rule 8.5, object/function definition in header file.<br>
- Function definitions in header files are used to allow 'inlining'.
-
- \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
- Unions are used for effective representation of core registers.
-
- \li Advisory Rule 19.7, Function-like macro defined.<br>
- Function-like macros are used to allow more efficient code.
- */
-
-
-/*******************************************************************************
- * CMSIS definitions
- ******************************************************************************/
-/**
- \ingroup Cortex_M0
- @{
- */
-
-/* CMSIS CM0 definitions */
-#define __CM0_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
-#define __CM0_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
-#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16U) | \
- __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
-
-#define __CORTEX_M (0x00U) /*!< Cortex-M Core */
-
-
-#if defined ( __CC_ARM )
- #define __ASM __asm /*!< asm keyword for ARM Compiler */
- #define __INLINE __inline /*!< inline keyword for ARM Compiler */
- #define __STATIC_INLINE static __inline
-
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #define __ASM __asm /*!< asm keyword for ARM Compiler */
- #define __INLINE __inline /*!< inline keyword for ARM Compiler */
- #define __STATIC_INLINE static __inline
-
-#elif defined ( __GNUC__ )
- #define __ASM __asm /*!< asm keyword for GNU Compiler */
- #define __INLINE inline /*!< inline keyword for GNU Compiler */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __ICCARM__ )
- #define __ASM __asm /*!< asm keyword for IAR Compiler */
- #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __TMS470__ )
- #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __TASKING__ )
- #define __ASM __asm /*!< asm keyword for TASKING Compiler */
- #define __INLINE inline /*!< inline keyword for TASKING Compiler */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __CSMC__ )
- #define __packed
- #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
- #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
- #define __STATIC_INLINE static inline
-
-#else
- #error Unknown compiler
-#endif
-
-/** __FPU_USED indicates whether an FPU is used or not.
- This core does not support an FPU at all
-*/
-#define __FPU_USED 0U
-
-#if defined ( __CC_ARM )
- #if defined __TARGET_FPU_VFP
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #if defined __ARM_PCS_VFP
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __GNUC__ )
- #if defined (__VFP_FP__) && !defined(__SOFTFP__)
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __ICCARM__ )
- #if defined __ARMVFP__
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __TMS470__ )
- #if defined __TI_VFP_SUPPORT__
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __TASKING__ )
- #if defined __FPU_VFP__
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __CSMC__ )
- #if ( __CSMC__ & 0x400U)
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#endif
-
-#include "core_cmInstr.h" /* Core Instruction Access */
-#include "core_cmFunc.h" /* Core Function Access */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __CORE_CM0_H_GENERIC */
-
-#ifndef __CMSIS_GENERIC
-
-#ifndef __CORE_CM0_H_DEPENDANT
-#define __CORE_CM0_H_DEPENDANT
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* check device defines and use defaults */
-#if defined __CHECK_DEVICE_DEFINES
- #ifndef __CM0_REV
- #define __CM0_REV 0x0000U
- #warning "__CM0_REV not defined in device header file; using default!"
- #endif
-
- #ifndef __NVIC_PRIO_BITS
- #define __NVIC_PRIO_BITS 2U
- #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
- #endif
-
- #ifndef __Vendor_SysTickConfig
- #define __Vendor_SysTickConfig 0U
- #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
- #endif
-#endif
-
-/* IO definitions (access restrictions to peripheral registers) */
-/**
- \defgroup CMSIS_glob_defs CMSIS Global Defines
-
- <strong>IO Type Qualifiers</strong> are used
- \li to specify the access to peripheral variables.
- \li for automatic generation of peripheral register debug information.
-*/
-#ifdef __cplusplus
- #define __I volatile /*!< Defines 'read only' permissions */
-#else
- #define __I volatile const /*!< Defines 'read only' permissions */
-#endif
-#define __O volatile /*!< Defines 'write only' permissions */
-#define __IO volatile /*!< Defines 'read / write' permissions */
-
-/* following defines should be used for structure members */
-#define __IM volatile const /*! Defines 'read only' structure member permissions */
-#define __OM volatile /*! Defines 'write only' structure member permissions */
-#define __IOM volatile /*! Defines 'read / write' structure member permissions */
-
-/*@} end of group Cortex_M0 */
-
-
-
-/*******************************************************************************
- * Register Abstraction
- Core Register contain:
- - Core Register
- - Core NVIC Register
- - Core SCB Register
- - Core SysTick Register
- ******************************************************************************/
-/**
- \defgroup CMSIS_core_register Defines and Type Definitions
- \brief Type definitions and defines for Cortex-M processor based devices.
-*/
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_CORE Status and Control Registers
- \brief Core Register type definitions.
- @{
- */
-
-/**
- \brief Union type to access the Application Program Status Register (APSR).
- */
-typedef union
-{
- struct
- {
- uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
- uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
- uint32_t C:1; /*!< bit: 29 Carry condition code flag */
- uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
- uint32_t N:1; /*!< bit: 31 Negative condition code flag */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} APSR_Type;
-
-/* APSR Register Definitions */
-#define APSR_N_Pos 31U /*!< APSR: N Position */
-#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
-
-#define APSR_Z_Pos 30U /*!< APSR: Z Position */
-#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
-
-#define APSR_C_Pos 29U /*!< APSR: C Position */
-#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
-
-#define APSR_V_Pos 28U /*!< APSR: V Position */
-#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
-
-
-/**
- \brief Union type to access the Interrupt Program Status Register (IPSR).
- */
-typedef union
-{
- struct
- {
- uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
- uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} IPSR_Type;
-
-/* IPSR Register Definitions */
-#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
-#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
-
-
-/**
- \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
- */
-typedef union
-{
- struct
- {
- uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
- uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
- uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
- uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
- uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
- uint32_t C:1; /*!< bit: 29 Carry condition code flag */
- uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
- uint32_t N:1; /*!< bit: 31 Negative condition code flag */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} xPSR_Type;
-
-/* xPSR Register Definitions */
-#define xPSR_N_Pos 31U /*!< xPSR: N Position */
-#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
-
-#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
-#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
-
-#define xPSR_C_Pos 29U /*!< xPSR: C Position */
-#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
-
-#define xPSR_V_Pos 28U /*!< xPSR: V Position */
-#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
-
-#define xPSR_T_Pos 24U /*!< xPSR: T Position */
-#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
-
-#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
-#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
-
-
-/**
- \brief Union type to access the Control Registers (CONTROL).
- */
-typedef union
-{
- struct
- {
- uint32_t _reserved0:1; /*!< bit: 0 Reserved */
- uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
- uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} CONTROL_Type;
-
-/* CONTROL Register Definitions */
-#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
-#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
-
-/*@} end of group CMSIS_CORE */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
- \brief Type definitions for the NVIC Registers
- @{
- */
-
-/**
- \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
- */
-typedef struct
-{
- __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
- uint32_t RESERVED0[31U];
- __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
- uint32_t RSERVED1[31U];
- __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
- uint32_t RESERVED2[31U];
- __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
- uint32_t RESERVED3[31U];
- uint32_t RESERVED4[64U];
- __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
-} NVIC_Type;
-
-/*@} end of group CMSIS_NVIC */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_SCB System Control Block (SCB)
- \brief Type definitions for the System Control Block Registers
- @{
- */
-
-/**
- \brief Structure type to access the System Control Block (SCB).
- */
-typedef struct
-{
- __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
- __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
- uint32_t RESERVED0;
- __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
- __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
- __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
- uint32_t RESERVED1;
- __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
- __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
-} SCB_Type;
-
-/* SCB CPUID Register Definitions */
-#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
-#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
-
-#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
-#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
-
-#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
-#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
-
-#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
-#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
-
-#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
-#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
-
-/* SCB Interrupt Control State Register Definitions */
-#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
-#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
-
-#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
-#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
-
-#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
-#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
-
-#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
-#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
-
-#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
-#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
-
-#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
-#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
-
-#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
-#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
-
-#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
-#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
-
-#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
-#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
-
-/* SCB Application Interrupt and Reset Control Register Definitions */
-#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
-#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
-
-#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
-#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
-
-#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
-#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
-
-#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
-#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
-
-#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
-#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
-
-/* SCB System Control Register Definitions */
-#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
-#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
-
-#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
-#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
-
-#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
-#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
-
-/* SCB Configuration Control Register Definitions */
-#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
-#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
-
-#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
-#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
-
-/* SCB System Handler Control and State Register Definitions */
-#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
-#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
-
-/*@} end of group CMSIS_SCB */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_SysTick System Tick Timer (SysTick)
- \brief Type definitions for the System Timer Registers.
- @{
- */
-
-/**
- \brief Structure type to access the System Timer (SysTick).
- */
-typedef struct
-{
- __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
- __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
- __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
- __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
-} SysTick_Type;
-
-/* SysTick Control / Status Register Definitions */
-#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
-#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
-
-#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
-#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
-
-#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
-#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
-
-#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
-#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
-
-/* SysTick Reload Register Definitions */
-#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
-#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
-
-/* SysTick Current Register Definitions */
-#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
-#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
-
-/* SysTick Calibration Register Definitions */
-#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
-#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
-
-#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
-#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
-
-#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
-#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
-
-/*@} end of group CMSIS_SysTick */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
- \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
- Therefore they are not covered by the Cortex-M0 header file.
- @{
- */
-/*@} end of group CMSIS_CoreDebug */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_core_bitfield Core register bit field macros
- \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
- @{
- */
-
-/**
- \brief Mask and shift a bit field value for use in a register bit range.
- \param[in] field Name of the register bit field.
- \param[in] value Value of the bit field.
- \return Masked and shifted value.
-*/
-#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
-
-/**
- \brief Mask and shift a register value to extract a bit filed value.
- \param[in] field Name of the register bit field.
- \param[in] value Value of register.
- \return Masked and shifted bit field value.
-*/
-#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
-
-/*@} end of group CMSIS_core_bitfield */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_core_base Core Definitions
- \brief Definitions for base addresses, unions, and structures.
- @{
- */
-
-/* Memory mapping of Cortex-M0 Hardware */
-#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
-#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
-#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
-#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
-
-#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
-#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
-#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
-
-
-/*@} */
-
-
-
-/*******************************************************************************
- * Hardware Abstraction Layer
- Core Function Interface contains:
- - Core NVIC Functions
- - Core SysTick Functions
- - Core Register Access Functions
- ******************************************************************************/
-/**
- \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
-*/
-
-
-
-/* ########################## NVIC functions #################################### */
-/**
- \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_NVICFunctions NVIC Functions
- \brief Functions that manage interrupts and exceptions via the NVIC.
- @{
- */
-
-/* Interrupt Priorities are WORD accessible only under ARMv6M */
-/* The following MACROS handle generation of the register offset and byte masks */
-#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
-#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
-#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
-
-
-/**
- \brief Enable External Interrupt
- \details Enables a device-specific interrupt in the NVIC interrupt controller.
- \param [in] IRQn External interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
-{
- NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Disable External Interrupt
- \details Disables a device-specific interrupt in the NVIC interrupt controller.
- \param [in] IRQn External interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
-{
- NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Get Pending Interrupt
- \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
- \param [in] IRQn Interrupt number.
- \return 0 Interrupt status is not pending.
- \return 1 Interrupt status is pending.
- */
-__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
-{
- return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
-}
-
-
-/**
- \brief Set Pending Interrupt
- \details Sets the pending bit of an external interrupt.
- \param [in] IRQn Interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
-{
- NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Clear Pending Interrupt
- \details Clears the pending bit of an external interrupt.
- \param [in] IRQn External interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
-{
- NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Set Interrupt Priority
- \details Sets the priority of an interrupt.
- \note The priority cannot be set for every core interrupt.
- \param [in] IRQn Interrupt number.
- \param [in] priority Priority to set.
- */
-__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
-{
- if ((int32_t)(IRQn) < 0)
- {
- SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
- (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
- }
- else
- {
- NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
- (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
- }
-}
-
-
-/**
- \brief Get Interrupt Priority
- \details Reads the priority of an interrupt.
- The interrupt number can be positive to specify an external (device specific) interrupt,
- or negative to specify an internal (core) interrupt.
- \param [in] IRQn Interrupt number.
- \return Interrupt Priority.
- Value is aligned automatically to the implemented priority bits of the microcontroller.
- */
-__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
-{
-
- if ((int32_t)(IRQn) < 0)
- {
- return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
- }
- else
- {
- return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
- }
-}
-
-
-/**
- \brief System Reset
- \details Initiates a system reset request to reset the MCU.
- */
-__STATIC_INLINE void NVIC_SystemReset(void)
-{
- __DSB(); /* Ensure all outstanding memory accesses included
- buffered write are completed before reset */
- SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
- SCB_AIRCR_SYSRESETREQ_Msk);
- __DSB(); /* Ensure completion of memory access */
-
- for(;;) /* wait until reset */
- {
- __NOP();
- }
-}
-
-/*@} end of CMSIS_Core_NVICFunctions */
-
-
-
-/* ################################## SysTick function ############################################ */
-/**
- \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
- \brief Functions that configure the System.
- @{
- */
-
-#if (__Vendor_SysTickConfig == 0U)
-
-/**
- \brief System Tick Configuration
- \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
- Counter is in free running mode to generate periodic interrupts.
- \param [in] ticks Number of ticks between two interrupts.
- \return 0 Function succeeded.
- \return 1 Function failed.
- \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
- function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
- must contain a vendor-specific implementation of this function.
- */
-__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
-{
- if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
- {
- return (1UL); /* Reload value impossible */
- }
-
- SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
- NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
- SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
- SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
- SysTick_CTRL_TICKINT_Msk |
- SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
- return (0UL); /* Function successful */
-}
-
-#endif
-
-/*@} end of CMSIS_Core_SysTickFunctions */
-
-
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __CORE_CM0_H_DEPENDANT */
-
-#endif /* __CMSIS_GENERIC */
diff --git a/stm32cubemx/Drivers/CMSIS/Include/core_cm0plus.h b/stm32cubemx/Drivers/CMSIS/Include/core_cm0plus.h
deleted file mode 100644
index b04aa39..0000000
--- a/stm32cubemx/Drivers/CMSIS/Include/core_cm0plus.h
+++ /dev/null
@@ -1,914 +0,0 @@
-/**************************************************************************//**
- * @file core_cm0plus.h
- * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
- * @version V4.30
- * @date 20. October 2015
- ******************************************************************************/
-/* Copyright (c) 2009 - 2015 ARM LIMITED
-
- All rights reserved.
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- - Neither the name of ARM nor the names of its contributors may be used
- to endorse or promote products derived from this software without
- specific prior written permission.
- *
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- POSSIBILITY OF SUCH DAMAGE.
- ---------------------------------------------------------------------------*/
-
-
-#if defined ( __ICCARM__ )
- #pragma system_include /* treat file as system include file for MISRA check */
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #pragma clang system_header /* treat file as system include file */
-#endif
-
-#ifndef __CORE_CM0PLUS_H_GENERIC
-#define __CORE_CM0PLUS_H_GENERIC
-
-#include <stdint.h>
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/**
- \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
- CMSIS violates the following MISRA-C:2004 rules:
-
- \li Required Rule 8.5, object/function definition in header file.<br>
- Function definitions in header files are used to allow 'inlining'.
-
- \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
- Unions are used for effective representation of core registers.
-
- \li Advisory Rule 19.7, Function-like macro defined.<br>
- Function-like macros are used to allow more efficient code.
- */
-
-
-/*******************************************************************************
- * CMSIS definitions
- ******************************************************************************/
-/**
- \ingroup Cortex-M0+
- @{
- */
-
-/* CMSIS CM0+ definitions */
-#define __CM0PLUS_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
-#define __CM0PLUS_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
-#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16U) | \
- __CM0PLUS_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
-
-#define __CORTEX_M (0x00U) /*!< Cortex-M Core */
-
-
-#if defined ( __CC_ARM )
- #define __ASM __asm /*!< asm keyword for ARM Compiler */
- #define __INLINE __inline /*!< inline keyword for ARM Compiler */
- #define __STATIC_INLINE static __inline
-
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #define __ASM __asm /*!< asm keyword for ARM Compiler */
- #define __INLINE __inline /*!< inline keyword for ARM Compiler */
- #define __STATIC_INLINE static __inline
-
-#elif defined ( __GNUC__ )
- #define __ASM __asm /*!< asm keyword for GNU Compiler */
- #define __INLINE inline /*!< inline keyword for GNU Compiler */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __ICCARM__ )
- #define __ASM __asm /*!< asm keyword for IAR Compiler */
- #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __TMS470__ )
- #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __TASKING__ )
- #define __ASM __asm /*!< asm keyword for TASKING Compiler */
- #define __INLINE inline /*!< inline keyword for TASKING Compiler */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __CSMC__ )
- #define __packed
- #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
- #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
- #define __STATIC_INLINE static inline
-
-#else
- #error Unknown compiler
-#endif
-
-/** __FPU_USED indicates whether an FPU is used or not.
- This core does not support an FPU at all
-*/
-#define __FPU_USED 0U
-
-#if defined ( __CC_ARM )
- #if defined __TARGET_FPU_VFP
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #if defined __ARM_PCS_VFP
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __GNUC__ )
- #if defined (__VFP_FP__) && !defined(__SOFTFP__)
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __ICCARM__ )
- #if defined __ARMVFP__
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __TMS470__ )
- #if defined __TI_VFP_SUPPORT__
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __TASKING__ )
- #if defined __FPU_VFP__
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __CSMC__ )
- #if ( __CSMC__ & 0x400U)
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#endif
-
-#include "core_cmInstr.h" /* Core Instruction Access */
-#include "core_cmFunc.h" /* Core Function Access */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __CORE_CM0PLUS_H_GENERIC */
-
-#ifndef __CMSIS_GENERIC
-
-#ifndef __CORE_CM0PLUS_H_DEPENDANT
-#define __CORE_CM0PLUS_H_DEPENDANT
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* check device defines and use defaults */
-#if defined __CHECK_DEVICE_DEFINES
- #ifndef __CM0PLUS_REV
- #define __CM0PLUS_REV 0x0000U
- #warning "__CM0PLUS_REV not defined in device header file; using default!"
- #endif
-
- #ifndef __MPU_PRESENT
- #define __MPU_PRESENT 0U
- #warning "__MPU_PRESENT not defined in device header file; using default!"
- #endif
-
- #ifndef __VTOR_PRESENT
- #define __VTOR_PRESENT 0U
- #warning "__VTOR_PRESENT not defined in device header file; using default!"
- #endif
-
- #ifndef __NVIC_PRIO_BITS
- #define __NVIC_PRIO_BITS 2U
- #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
- #endif
-
- #ifndef __Vendor_SysTickConfig
- #define __Vendor_SysTickConfig 0U
- #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
- #endif
-#endif
-
-/* IO definitions (access restrictions to peripheral registers) */
-/**
- \defgroup CMSIS_glob_defs CMSIS Global Defines
-
- <strong>IO Type Qualifiers</strong> are used
- \li to specify the access to peripheral variables.
- \li for automatic generation of peripheral register debug information.
-*/
-#ifdef __cplusplus
- #define __I volatile /*!< Defines 'read only' permissions */
-#else
- #define __I volatile const /*!< Defines 'read only' permissions */
-#endif
-#define __O volatile /*!< Defines 'write only' permissions */
-#define __IO volatile /*!< Defines 'read / write' permissions */
-
-/* following defines should be used for structure members */
-#define __IM volatile const /*! Defines 'read only' structure member permissions */
-#define __OM volatile /*! Defines 'write only' structure member permissions */
-#define __IOM volatile /*! Defines 'read / write' structure member permissions */
-
-/*@} end of group Cortex-M0+ */
-
-
-
-/*******************************************************************************
- * Register Abstraction
- Core Register contain:
- - Core Register
- - Core NVIC Register
- - Core SCB Register
- - Core SysTick Register
- - Core MPU Register
- ******************************************************************************/
-/**
- \defgroup CMSIS_core_register Defines and Type Definitions
- \brief Type definitions and defines for Cortex-M processor based devices.
-*/
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_CORE Status and Control Registers
- \brief Core Register type definitions.
- @{
- */
-
-/**
- \brief Union type to access the Application Program Status Register (APSR).
- */
-typedef union
-{
- struct
- {
- uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
- uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
- uint32_t C:1; /*!< bit: 29 Carry condition code flag */
- uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
- uint32_t N:1; /*!< bit: 31 Negative condition code flag */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} APSR_Type;
-
-/* APSR Register Definitions */
-#define APSR_N_Pos 31U /*!< APSR: N Position */
-#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
-
-#define APSR_Z_Pos 30U /*!< APSR: Z Position */
-#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
-
-#define APSR_C_Pos 29U /*!< APSR: C Position */
-#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
-
-#define APSR_V_Pos 28U /*!< APSR: V Position */
-#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
-
-
-/**
- \brief Union type to access the Interrupt Program Status Register (IPSR).
- */
-typedef union
-{
- struct
- {
- uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
- uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} IPSR_Type;
-
-/* IPSR Register Definitions */
-#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
-#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
-
-
-/**
- \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
- */
-typedef union
-{
- struct
- {
- uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
- uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
- uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
- uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
- uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
- uint32_t C:1; /*!< bit: 29 Carry condition code flag */
- uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
- uint32_t N:1; /*!< bit: 31 Negative condition code flag */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} xPSR_Type;
-
-/* xPSR Register Definitions */
-#define xPSR_N_Pos 31U /*!< xPSR: N Position */
-#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
-
-#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
-#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
-
-#define xPSR_C_Pos 29U /*!< xPSR: C Position */
-#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
-
-#define xPSR_V_Pos 28U /*!< xPSR: V Position */
-#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
-
-#define xPSR_T_Pos 24U /*!< xPSR: T Position */
-#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
-
-#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
-#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
-
-
-/**
- \brief Union type to access the Control Registers (CONTROL).
- */
-typedef union
-{
- struct
- {
- uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
- uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
- uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} CONTROL_Type;
-
-/* CONTROL Register Definitions */
-#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
-#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
-
-#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
-#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
-
-/*@} end of group CMSIS_CORE */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
- \brief Type definitions for the NVIC Registers
- @{
- */
-
-/**
- \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
- */
-typedef struct
-{
- __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
- uint32_t RESERVED0[31U];
- __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
- uint32_t RSERVED1[31U];
- __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
- uint32_t RESERVED2[31U];
- __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
- uint32_t RESERVED3[31U];
- uint32_t RESERVED4[64U];
- __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
-} NVIC_Type;
-
-/*@} end of group CMSIS_NVIC */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_SCB System Control Block (SCB)
- \brief Type definitions for the System Control Block Registers
- @{
- */
-
-/**
- \brief Structure type to access the System Control Block (SCB).
- */
-typedef struct
-{
- __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
- __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
-#if (__VTOR_PRESENT == 1U)
- __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
-#else
- uint32_t RESERVED0;
-#endif
- __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
- __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
- __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
- uint32_t RESERVED1;
- __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
- __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
-} SCB_Type;
-
-/* SCB CPUID Register Definitions */
-#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
-#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
-
-#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
-#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
-
-#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
-#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
-
-#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
-#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
-
-#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
-#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
-
-/* SCB Interrupt Control State Register Definitions */
-#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
-#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
-
-#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
-#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
-
-#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
-#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
-
-#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
-#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
-
-#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
-#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
-
-#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
-#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
-
-#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
-#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
-
-#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
-#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
-
-#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
-#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
-
-#if (__VTOR_PRESENT == 1U)
-/* SCB Interrupt Control State Register Definitions */
-#define SCB_VTOR_TBLOFF_Pos 8U /*!< SCB VTOR: TBLOFF Position */
-#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
-#endif
-
-/* SCB Application Interrupt and Reset Control Register Definitions */
-#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
-#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
-
-#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
-#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
-
-#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
-#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
-
-#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
-#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
-
-#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
-#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
-
-/* SCB System Control Register Definitions */
-#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
-#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
-
-#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
-#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
-
-#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
-#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
-
-/* SCB Configuration Control Register Definitions */
-#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
-#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
-
-#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
-#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
-
-/* SCB System Handler Control and State Register Definitions */
-#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
-#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
-
-/*@} end of group CMSIS_SCB */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_SysTick System Tick Timer (SysTick)
- \brief Type definitions for the System Timer Registers.
- @{
- */
-
-/**
- \brief Structure type to access the System Timer (SysTick).
- */
-typedef struct
-{
- __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
- __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
- __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
- __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
-} SysTick_Type;
-
-/* SysTick Control / Status Register Definitions */
-#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
-#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
-
-#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
-#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
-
-#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
-#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
-
-#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
-#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
-
-/* SysTick Reload Register Definitions */
-#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
-#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
-
-/* SysTick Current Register Definitions */
-#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
-#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
-
-/* SysTick Calibration Register Definitions */
-#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
-#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
-
-#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
-#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
-
-#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
-#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
-
-/*@} end of group CMSIS_SysTick */
-
-#if (__MPU_PRESENT == 1U)
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_MPU Memory Protection Unit (MPU)
- \brief Type definitions for the Memory Protection Unit (MPU)
- @{
- */
-
-/**
- \brief Structure type to access the Memory Protection Unit (MPU).
- */
-typedef struct
-{
- __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
- __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
- __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
- __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
- __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
-} MPU_Type;
-
-/* MPU Type Register Definitions */
-#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
-#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
-
-#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
-#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
-
-#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
-#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
-
-/* MPU Control Register Definitions */
-#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
-#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
-
-#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
-#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
-
-#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
-#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
-
-/* MPU Region Number Register Definitions */
-#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
-#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
-
-/* MPU Region Base Address Register Definitions */
-#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */
-#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
-
-#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
-#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
-
-#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
-#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
-
-/* MPU Region Attribute and Size Register Definitions */
-#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
-#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
-
-#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
-#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
-
-#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
-#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
-
-#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
-#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
-
-#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
-#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
-
-#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
-#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
-
-#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
-#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
-
-#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
-#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
-
-#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
-#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
-
-#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
-#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
-
-/*@} end of group CMSIS_MPU */
-#endif
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
- \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
- Therefore they are not covered by the Cortex-M0+ header file.
- @{
- */
-/*@} end of group CMSIS_CoreDebug */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_core_bitfield Core register bit field macros
- \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
- @{
- */
-
-/**
- \brief Mask and shift a bit field value for use in a register bit range.
- \param[in] field Name of the register bit field.
- \param[in] value Value of the bit field.
- \return Masked and shifted value.
-*/
-#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
-
-/**
- \brief Mask and shift a register value to extract a bit filed value.
- \param[in] field Name of the register bit field.
- \param[in] value Value of register.
- \return Masked and shifted bit field value.
-*/
-#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
-
-/*@} end of group CMSIS_core_bitfield */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_core_base Core Definitions
- \brief Definitions for base addresses, unions, and structures.
- @{
- */
-
-/* Memory mapping of Cortex-M0+ Hardware */
-#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
-#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
-#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
-#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
-
-#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
-#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
-#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
-
-#if (__MPU_PRESENT == 1U)
- #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
- #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
-#endif
-
-/*@} */
-
-
-
-/*******************************************************************************
- * Hardware Abstraction Layer
- Core Function Interface contains:
- - Core NVIC Functions
- - Core SysTick Functions
- - Core Register Access Functions
- ******************************************************************************/
-/**
- \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
-*/
-
-
-
-/* ########################## NVIC functions #################################### */
-/**
- \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_NVICFunctions NVIC Functions
- \brief Functions that manage interrupts and exceptions via the NVIC.
- @{
- */
-
-/* Interrupt Priorities are WORD accessible only under ARMv6M */
-/* The following MACROS handle generation of the register offset and byte masks */
-#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
-#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
-#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
-
-
-/**
- \brief Enable External Interrupt
- \details Enables a device-specific interrupt in the NVIC interrupt controller.
- \param [in] IRQn External interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
-{
- NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Disable External Interrupt
- \details Disables a device-specific interrupt in the NVIC interrupt controller.
- \param [in] IRQn External interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
-{
- NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Get Pending Interrupt
- \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
- \param [in] IRQn Interrupt number.
- \return 0 Interrupt status is not pending.
- \return 1 Interrupt status is pending.
- */
-__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
-{
- return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
-}
-
-
-/**
- \brief Set Pending Interrupt
- \details Sets the pending bit of an external interrupt.
- \param [in] IRQn Interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
-{
- NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Clear Pending Interrupt
- \details Clears the pending bit of an external interrupt.
- \param [in] IRQn External interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
-{
- NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Set Interrupt Priority
- \details Sets the priority of an interrupt.
- \note The priority cannot be set for every core interrupt.
- \param [in] IRQn Interrupt number.
- \param [in] priority Priority to set.
- */
-__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
-{
- if ((int32_t)(IRQn) < 0)
- {
- SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
- (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
- }
- else
- {
- NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
- (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
- }
-}
-
-
-/**
- \brief Get Interrupt Priority
- \details Reads the priority of an interrupt.
- The interrupt number can be positive to specify an external (device specific) interrupt,
- or negative to specify an internal (core) interrupt.
- \param [in] IRQn Interrupt number.
- \return Interrupt Priority.
- Value is aligned automatically to the implemented priority bits of the microcontroller.
- */
-__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
-{
-
- if ((int32_t)(IRQn) < 0)
- {
- return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
- }
- else
- {
- return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
- }
-}
-
-
-/**
- \brief System Reset
- \details Initiates a system reset request to reset the MCU.
- */
-__STATIC_INLINE void NVIC_SystemReset(void)
-{
- __DSB(); /* Ensure all outstanding memory accesses included
- buffered write are completed before reset */
- SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
- SCB_AIRCR_SYSRESETREQ_Msk);
- __DSB(); /* Ensure completion of memory access */
-
- for(;;) /* wait until reset */
- {
- __NOP();
- }
-}
-
-/*@} end of CMSIS_Core_NVICFunctions */
-
-
-
-/* ################################## SysTick function ############################################ */
-/**
- \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
- \brief Functions that configure the System.
- @{
- */
-
-#if (__Vendor_SysTickConfig == 0U)
-
-/**
- \brief System Tick Configuration
- \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
- Counter is in free running mode to generate periodic interrupts.
- \param [in] ticks Number of ticks between two interrupts.
- \return 0 Function succeeded.
- \return 1 Function failed.
- \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
- function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
- must contain a vendor-specific implementation of this function.
- */
-__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
-{
- if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
- {
- return (1UL); /* Reload value impossible */
- }
-
- SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
- NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
- SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
- SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
- SysTick_CTRL_TICKINT_Msk |
- SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
- return (0UL); /* Function successful */
-}
-
-#endif
-
-/*@} end of CMSIS_Core_SysTickFunctions */
-
-
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __CORE_CM0PLUS_H_DEPENDANT */
-
-#endif /* __CMSIS_GENERIC */
diff --git a/stm32cubemx/Drivers/CMSIS/Include/core_cm3.h b/stm32cubemx/Drivers/CMSIS/Include/core_cm3.h
deleted file mode 100644
index b4ac4c7..0000000
--- a/stm32cubemx/Drivers/CMSIS/Include/core_cm3.h
+++ /dev/null
@@ -1,1763 +0,0 @@
-/**************************************************************************//**
- * @file core_cm3.h
- * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
- * @version V4.30
- * @date 20. October 2015
- ******************************************************************************/
-/* Copyright (c) 2009 - 2015 ARM LIMITED
-
- All rights reserved.
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- - Neither the name of ARM nor the names of its contributors may be used
- to endorse or promote products derived from this software without
- specific prior written permission.
- *
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- POSSIBILITY OF SUCH DAMAGE.
- ---------------------------------------------------------------------------*/
-
-
-#if defined ( __ICCARM__ )
- #pragma system_include /* treat file as system include file for MISRA check */
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #pragma clang system_header /* treat file as system include file */
-#endif
-
-#ifndef __CORE_CM3_H_GENERIC
-#define __CORE_CM3_H_GENERIC
-
-#include <stdint.h>
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/**
- \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
- CMSIS violates the following MISRA-C:2004 rules:
-
- \li Required Rule 8.5, object/function definition in header file.<br>
- Function definitions in header files are used to allow 'inlining'.
-
- \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
- Unions are used for effective representation of core registers.
-
- \li Advisory Rule 19.7, Function-like macro defined.<br>
- Function-like macros are used to allow more efficient code.
- */
-
-
-/*******************************************************************************
- * CMSIS definitions
- ******************************************************************************/
-/**
- \ingroup Cortex_M3
- @{
- */
-
-/* CMSIS CM3 definitions */
-#define __CM3_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
-#define __CM3_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
-#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16U) | \
- __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
-
-#define __CORTEX_M (0x03U) /*!< Cortex-M Core */
-
-
-#if defined ( __CC_ARM )
- #define __ASM __asm /*!< asm keyword for ARM Compiler */
- #define __INLINE __inline /*!< inline keyword for ARM Compiler */
- #define __STATIC_INLINE static __inline
-
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #define __ASM __asm /*!< asm keyword for ARM Compiler */
- #define __INLINE __inline /*!< inline keyword for ARM Compiler */
- #define __STATIC_INLINE static __inline
-
-#elif defined ( __GNUC__ )
- #define __ASM __asm /*!< asm keyword for GNU Compiler */
- #define __INLINE inline /*!< inline keyword for GNU Compiler */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __ICCARM__ )
- #define __ASM __asm /*!< asm keyword for IAR Compiler */
- #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __TMS470__ )
- #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __TASKING__ )
- #define __ASM __asm /*!< asm keyword for TASKING Compiler */
- #define __INLINE inline /*!< inline keyword for TASKING Compiler */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __CSMC__ )
- #define __packed
- #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
- #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
- #define __STATIC_INLINE static inline
-
-#else
- #error Unknown compiler
-#endif
-
-/** __FPU_USED indicates whether an FPU is used or not.
- This core does not support an FPU at all
-*/
-#define __FPU_USED 0U
-
-#if defined ( __CC_ARM )
- #if defined __TARGET_FPU_VFP
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #if defined __ARM_PCS_VFP
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __GNUC__ )
- #if defined (__VFP_FP__) && !defined(__SOFTFP__)
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __ICCARM__ )
- #if defined __ARMVFP__
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __TMS470__ )
- #if defined __TI_VFP_SUPPORT__
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __TASKING__ )
- #if defined __FPU_VFP__
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __CSMC__ )
- #if ( __CSMC__ & 0x400U)
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#endif
-
-#include "core_cmInstr.h" /* Core Instruction Access */
-#include "core_cmFunc.h" /* Core Function Access */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __CORE_CM3_H_GENERIC */
-
-#ifndef __CMSIS_GENERIC
-
-#ifndef __CORE_CM3_H_DEPENDANT
-#define __CORE_CM3_H_DEPENDANT
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* check device defines and use defaults */
-#if defined __CHECK_DEVICE_DEFINES
- #ifndef __CM3_REV
- #define __CM3_REV 0x0200U
- #warning "__CM3_REV not defined in device header file; using default!"
- #endif
-
- #ifndef __MPU_PRESENT
- #define __MPU_PRESENT 0U
- #warning "__MPU_PRESENT not defined in device header file; using default!"
- #endif
-
- #ifndef __NVIC_PRIO_BITS
- #define __NVIC_PRIO_BITS 4U
- #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
- #endif
-
- #ifndef __Vendor_SysTickConfig
- #define __Vendor_SysTickConfig 0U
- #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
- #endif
-#endif
-
-/* IO definitions (access restrictions to peripheral registers) */
-/**
- \defgroup CMSIS_glob_defs CMSIS Global Defines
-
- <strong>IO Type Qualifiers</strong> are used
- \li to specify the access to peripheral variables.
- \li for automatic generation of peripheral register debug information.
-*/
-#ifdef __cplusplus
- #define __I volatile /*!< Defines 'read only' permissions */
-#else
- #define __I volatile const /*!< Defines 'read only' permissions */
-#endif
-#define __O volatile /*!< Defines 'write only' permissions */
-#define __IO volatile /*!< Defines 'read / write' permissions */
-
-/* following defines should be used for structure members */
-#define __IM volatile const /*! Defines 'read only' structure member permissions */
-#define __OM volatile /*! Defines 'write only' structure member permissions */
-#define __IOM volatile /*! Defines 'read / write' structure member permissions */
-
-/*@} end of group Cortex_M3 */
-
-
-
-/*******************************************************************************
- * Register Abstraction
- Core Register contain:
- - Core Register
- - Core NVIC Register
- - Core SCB Register
- - Core SysTick Register
- - Core Debug Register
- - Core MPU Register
- ******************************************************************************/
-/**
- \defgroup CMSIS_core_register Defines and Type Definitions
- \brief Type definitions and defines for Cortex-M processor based devices.
-*/
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_CORE Status and Control Registers
- \brief Core Register type definitions.
- @{
- */
-
-/**
- \brief Union type to access the Application Program Status Register (APSR).
- */
-typedef union
-{
- struct
- {
- uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
- uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
- uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
- uint32_t C:1; /*!< bit: 29 Carry condition code flag */
- uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
- uint32_t N:1; /*!< bit: 31 Negative condition code flag */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} APSR_Type;
-
-/* APSR Register Definitions */
-#define APSR_N_Pos 31U /*!< APSR: N Position */
-#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
-
-#define APSR_Z_Pos 30U /*!< APSR: Z Position */
-#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
-
-#define APSR_C_Pos 29U /*!< APSR: C Position */
-#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
-
-#define APSR_V_Pos 28U /*!< APSR: V Position */
-#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
-
-#define APSR_Q_Pos 27U /*!< APSR: Q Position */
-#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */
-
-
-/**
- \brief Union type to access the Interrupt Program Status Register (IPSR).
- */
-typedef union
-{
- struct
- {
- uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
- uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} IPSR_Type;
-
-/* IPSR Register Definitions */
-#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
-#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
-
-
-/**
- \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
- */
-typedef union
-{
- struct
- {
- uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
- uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
- uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
- uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
- uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
- uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
- uint32_t C:1; /*!< bit: 29 Carry condition code flag */
- uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
- uint32_t N:1; /*!< bit: 31 Negative condition code flag */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} xPSR_Type;
-
-/* xPSR Register Definitions */
-#define xPSR_N_Pos 31U /*!< xPSR: N Position */
-#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
-
-#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
-#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
-
-#define xPSR_C_Pos 29U /*!< xPSR: C Position */
-#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
-
-#define xPSR_V_Pos 28U /*!< xPSR: V Position */
-#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
-
-#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */
-#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */
-
-#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */
-#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */
-
-#define xPSR_T_Pos 24U /*!< xPSR: T Position */
-#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
-
-#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
-#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
-
-
-/**
- \brief Union type to access the Control Registers (CONTROL).
- */
-typedef union
-{
- struct
- {
- uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
- uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
- uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} CONTROL_Type;
-
-/* CONTROL Register Definitions */
-#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
-#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
-
-#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
-#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
-
-/*@} end of group CMSIS_CORE */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
- \brief Type definitions for the NVIC Registers
- @{
- */
-
-/**
- \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
- */
-typedef struct
-{
- __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
- uint32_t RESERVED0[24U];
- __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
- uint32_t RSERVED1[24U];
- __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
- uint32_t RESERVED2[24U];
- __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
- uint32_t RESERVED3[24U];
- __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
- uint32_t RESERVED4[56U];
- __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
- uint32_t RESERVED5[644U];
- __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
-} NVIC_Type;
-
-/* Software Triggered Interrupt Register Definitions */
-#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */
-#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */
-
-/*@} end of group CMSIS_NVIC */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_SCB System Control Block (SCB)
- \brief Type definitions for the System Control Block Registers
- @{
- */
-
-/**
- \brief Structure type to access the System Control Block (SCB).
- */
-typedef struct
-{
- __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
- __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
- __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
- __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
- __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
- __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
- __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
- __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
- __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
- __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
- __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
- __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
- __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
- __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
- __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
- __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
- __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
- __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
- __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
- uint32_t RESERVED0[5U];
- __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
-} SCB_Type;
-
-/* SCB CPUID Register Definitions */
-#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
-#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
-
-#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
-#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
-
-#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
-#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
-
-#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
-#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
-
-#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
-#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
-
-/* SCB Interrupt Control State Register Definitions */
-#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
-#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
-
-#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
-#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
-
-#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
-#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
-
-#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
-#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
-
-#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
-#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
-
-#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
-#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
-
-#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
-#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
-
-#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
-#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
-
-#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */
-#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
-
-#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
-#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
-
-/* SCB Vector Table Offset Register Definitions */
-#if (__CM3_REV < 0x0201U) /* core r2p1 */
-#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */
-#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
-
-#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
-#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
-#else
-#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
-#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
-#endif
-
-/* SCB Application Interrupt and Reset Control Register Definitions */
-#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
-#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
-
-#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
-#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
-
-#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
-#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
-
-#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */
-#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
-
-#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
-#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
-
-#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
-#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
-
-#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */
-#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */
-
-/* SCB System Control Register Definitions */
-#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
-#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
-
-#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
-#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
-
-#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
-#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
-
-/* SCB Configuration Control Register Definitions */
-#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
-#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
-
-#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */
-#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
-
-#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */
-#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
-
-#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
-#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
-
-#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */
-#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
-
-#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */
-#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */
-
-/* SCB System Handler Control and State Register Definitions */
-#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */
-#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
-
-#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */
-#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
-
-#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */
-#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
-
-#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
-#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
-
-#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */
-#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
-
-#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */
-#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
-
-#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */
-#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
-
-#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */
-#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
-
-#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */
-#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
-
-#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */
-#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
-
-#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */
-#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
-
-#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */
-#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
-
-#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */
-#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
-
-#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */
-#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */
-
-/* SCB Configurable Fault Status Register Definitions */
-#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */
-#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
-
-#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */
-#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
-
-#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */
-#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
-
-/* SCB Hard Fault Status Register Definitions */
-#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */
-#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
-
-#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */
-#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
-
-#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */
-#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
-
-/* SCB Debug Fault Status Register Definitions */
-#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */
-#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
-
-#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */
-#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
-
-#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */
-#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
-
-#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */
-#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
-
-#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */
-#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */
-
-/*@} end of group CMSIS_SCB */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
- \brief Type definitions for the System Control and ID Register not in the SCB
- @{
- */
-
-/**
- \brief Structure type to access the System Control and ID Register not in the SCB.
- */
-typedef struct
-{
- uint32_t RESERVED0[1U];
- __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
-#if ((defined __CM3_REV) && (__CM3_REV >= 0x200U))
- __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
-#else
- uint32_t RESERVED1[1U];
-#endif
-} SCnSCB_Type;
-
-/* Interrupt Controller Type Register Definitions */
-#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */
-#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */
-
-/* Auxiliary Control Register Definitions */
-
-#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */
-#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
-
-#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */
-#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
-
-#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */
-#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */
-
-/*@} end of group CMSIS_SCnotSCB */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_SysTick System Tick Timer (SysTick)
- \brief Type definitions for the System Timer Registers.
- @{
- */
-
-/**
- \brief Structure type to access the System Timer (SysTick).
- */
-typedef struct
-{
- __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
- __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
- __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
- __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
-} SysTick_Type;
-
-/* SysTick Control / Status Register Definitions */
-#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
-#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
-
-#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
-#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
-
-#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
-#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
-
-#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
-#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
-
-/* SysTick Reload Register Definitions */
-#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
-#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
-
-/* SysTick Current Register Definitions */
-#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
-#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
-
-/* SysTick Calibration Register Definitions */
-#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
-#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
-
-#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
-#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
-
-#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
-#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
-
-/*@} end of group CMSIS_SysTick */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
- \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
- @{
- */
-
-/**
- \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
- */
-typedef struct
-{
- __OM union
- {
- __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
- __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
- __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
- } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
- uint32_t RESERVED0[864U];
- __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
- uint32_t RESERVED1[15U];
- __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
- uint32_t RESERVED2[15U];
- __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
- uint32_t RESERVED3[29U];
- __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
- __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
- __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
- uint32_t RESERVED4[43U];
- __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
- __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
- uint32_t RESERVED5[6U];
- __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
- __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
- __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
- __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
- __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
- __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
- __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
- __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
- __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
- __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
- __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
- __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
-} ITM_Type;
-
-/* ITM Trace Privilege Register Definitions */
-#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */
-#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */
-
-/* ITM Trace Control Register Definitions */
-#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */
-#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
-
-#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */
-#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
-
-#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */
-#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
-
-#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */
-#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
-
-#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */
-#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
-
-#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */
-#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
-
-#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */
-#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
-
-#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */
-#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
-
-#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */
-#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */
-
-/* ITM Integration Write Register Definitions */
-#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */
-#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */
-
-/* ITM Integration Read Register Definitions */
-#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */
-#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */
-
-/* ITM Integration Mode Control Register Definitions */
-#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */
-#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */
-
-/* ITM Lock Status Register Definitions */
-#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */
-#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
-
-#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */
-#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
-
-#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */
-#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */
-
-/*@}*/ /* end of group CMSIS_ITM */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
- \brief Type definitions for the Data Watchpoint and Trace (DWT)
- @{
- */
-
-/**
- \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
- */
-typedef struct
-{
- __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
- __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
- __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
- __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
- __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
- __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
- __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
- __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
- __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
- __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
- __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
- uint32_t RESERVED0[1U];
- __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
- __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
- __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
- uint32_t RESERVED1[1U];
- __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
- __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
- __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
- uint32_t RESERVED2[1U];
- __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
- __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
- __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
-} DWT_Type;
-
-/* DWT Control Register Definitions */
-#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */
-#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
-
-#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */
-#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
-
-#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */
-#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
-
-#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */
-#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
-
-#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */
-#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
-
-#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */
-#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
-
-#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */
-#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
-
-#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */
-#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
-
-#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */
-#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
-
-#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */
-#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
-
-#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */
-#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
-
-#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */
-#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
-
-#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */
-#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
-
-#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */
-#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
-
-#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */
-#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
-
-#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */
-#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
-
-#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */
-#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
-
-#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */
-#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */
-
-/* DWT CPI Count Register Definitions */
-#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */
-#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */
-
-/* DWT Exception Overhead Count Register Definitions */
-#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */
-#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */
-
-/* DWT Sleep Count Register Definitions */
-#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */
-#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
-
-/* DWT LSU Count Register Definitions */
-#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */
-#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */
-
-/* DWT Folded-instruction Count Register Definitions */
-#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */
-#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */
-
-/* DWT Comparator Mask Register Definitions */
-#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */
-#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */
-
-/* DWT Comparator Function Register Definitions */
-#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */
-#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
-
-#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */
-#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
-
-#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */
-#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
-
-#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */
-#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
-
-#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */
-#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
-
-#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */
-#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
-
-#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */
-#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
-
-#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */
-#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
-
-#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */
-#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */
-
-/*@}*/ /* end of group CMSIS_DWT */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_TPI Trace Port Interface (TPI)
- \brief Type definitions for the Trace Port Interface (TPI)
- @{
- */
-
-/**
- \brief Structure type to access the Trace Port Interface Register (TPI).
- */
-typedef struct
-{
- __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
- __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
- uint32_t RESERVED0[2U];
- __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
- uint32_t RESERVED1[55U];
- __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
- uint32_t RESERVED2[131U];
- __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
- __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
- __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
- uint32_t RESERVED3[759U];
- __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
- __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
- __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
- uint32_t RESERVED4[1U];
- __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
- __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
- __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
- uint32_t RESERVED5[39U];
- __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
- __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
- uint32_t RESERVED7[8U];
- __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
- __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
-} TPI_Type;
-
-/* TPI Asynchronous Clock Prescaler Register Definitions */
-#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */
-#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */
-
-/* TPI Selected Pin Protocol Register Definitions */
-#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */
-#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */
-
-/* TPI Formatter and Flush Status Register Definitions */
-#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */
-#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
-
-#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */
-#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
-
-#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */
-#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
-
-#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */
-#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */
-
-/* TPI Formatter and Flush Control Register Definitions */
-#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */
-#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
-
-#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */
-#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
-
-/* TPI TRIGGER Register Definitions */
-#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */
-#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */
-
-/* TPI Integration ETM Data Register Definitions (FIFO0) */
-#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */
-#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
-
-#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */
-#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
-
-#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */
-#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
-
-#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */
-#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
-
-#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */
-#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
-
-#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */
-#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
-
-#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */
-#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */
-
-/* TPI ITATBCTR2 Register Definitions */
-#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */
-#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */
-
-/* TPI Integration ITM Data Register Definitions (FIFO1) */
-#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */
-#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
-
-#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */
-#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
-
-#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */
-#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
-
-#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */
-#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
-
-#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */
-#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
-
-#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */
-#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
-
-#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */
-#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */
-
-/* TPI ITATBCTR0 Register Definitions */
-#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */
-#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */
-
-/* TPI Integration Mode Control Register Definitions */
-#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */
-#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */
-
-/* TPI DEVID Register Definitions */
-#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */
-#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
-
-#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */
-#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
-
-#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */
-#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
-
-#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */
-#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
-
-#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */
-#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
-
-#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */
-#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */
-
-/* TPI DEVTYPE Register Definitions */
-#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */
-#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
-
-#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */
-#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */
-
-/*@}*/ /* end of group CMSIS_TPI */
-
-
-#if (__MPU_PRESENT == 1U)
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_MPU Memory Protection Unit (MPU)
- \brief Type definitions for the Memory Protection Unit (MPU)
- @{
- */
-
-/**
- \brief Structure type to access the Memory Protection Unit (MPU).
- */
-typedef struct
-{
- __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
- __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
- __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
- __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
- __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
- __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
- __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
- __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
- __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
- __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
- __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
-} MPU_Type;
-
-/* MPU Type Register Definitions */
-#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
-#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
-
-#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
-#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
-
-#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
-#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
-
-/* MPU Control Register Definitions */
-#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
-#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
-
-#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
-#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
-
-#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
-#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
-
-/* MPU Region Number Register Definitions */
-#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
-#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
-
-/* MPU Region Base Address Register Definitions */
-#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */
-#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
-
-#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
-#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
-
-#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
-#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
-
-/* MPU Region Attribute and Size Register Definitions */
-#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
-#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
-
-#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
-#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
-
-#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
-#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
-
-#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
-#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
-
-#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
-#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
-
-#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
-#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
-
-#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
-#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
-
-#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
-#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
-
-#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
-#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
-
-#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
-#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
-
-/*@} end of group CMSIS_MPU */
-#endif
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
- \brief Type definitions for the Core Debug Registers
- @{
- */
-
-/**
- \brief Structure type to access the Core Debug Register (CoreDebug).
- */
-typedef struct
-{
- __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
- __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
- __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
- __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
-} CoreDebug_Type;
-
-/* Debug Halting Control and Status Register Definitions */
-#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */
-#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
-
-#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */
-#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
-
-#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
-#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
-
-#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */
-#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
-
-#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */
-#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
-
-#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */
-#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
-
-#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */
-#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
-
-#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
-#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
-
-#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */
-#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
-
-#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */
-#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
-
-#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */
-#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
-
-#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */
-#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
-
-/* Debug Core Register Selector Register Definitions */
-#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */
-#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
-
-#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */
-#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */
-
-/* Debug Exception and Monitor Control Register Definitions */
-#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */
-#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
-
-#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */
-#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
-
-#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */
-#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
-
-#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */
-#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
-
-#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */
-#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
-
-#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */
-#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
-
-#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */
-#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
-
-#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */
-#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
-
-#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */
-#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
-
-#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */
-#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
-
-#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */
-#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
-
-#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */
-#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
-
-#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */
-#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
-
-/*@} end of group CMSIS_CoreDebug */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_core_bitfield Core register bit field macros
- \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
- @{
- */
-
-/**
- \brief Mask and shift a bit field value for use in a register bit range.
- \param[in] field Name of the register bit field.
- \param[in] value Value of the bit field.
- \return Masked and shifted value.
-*/
-#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
-
-/**
- \brief Mask and shift a register value to extract a bit filed value.
- \param[in] field Name of the register bit field.
- \param[in] value Value of register.
- \return Masked and shifted bit field value.
-*/
-#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
-
-/*@} end of group CMSIS_core_bitfield */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_core_base Core Definitions
- \brief Definitions for base addresses, unions, and structures.
- @{
- */
-
-/* Memory mapping of Cortex-M3 Hardware */
-#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
-#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
-#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
-#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
-#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
-#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
-#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
-#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
-
-#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
-#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
-#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
-#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
-#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
-#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
-#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
-#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
-
-#if (__MPU_PRESENT == 1U)
- #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
- #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
-#endif
-
-/*@} */
-
-
-
-/*******************************************************************************
- * Hardware Abstraction Layer
- Core Function Interface contains:
- - Core NVIC Functions
- - Core SysTick Functions
- - Core Debug Functions
- - Core Register Access Functions
- ******************************************************************************/
-/**
- \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
-*/
-
-
-
-/* ########################## NVIC functions #################################### */
-/**
- \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_NVICFunctions NVIC Functions
- \brief Functions that manage interrupts and exceptions via the NVIC.
- @{
- */
-
-/**
- \brief Set Priority Grouping
- \details Sets the priority grouping field using the required unlock sequence.
- The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
- Only values from 0..7 are used.
- In case of a conflict between priority grouping and available
- priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
- \param [in] PriorityGroup Priority grouping field.
- */
-__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
-{
- uint32_t reg_value;
- uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
-
- reg_value = SCB->AIRCR; /* read old register configuration */
- reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */
- reg_value = (reg_value |
- ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
- (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */
- SCB->AIRCR = reg_value;
-}
-
-
-/**
- \brief Get Priority Grouping
- \details Reads the priority grouping field from the NVIC Interrupt Controller.
- \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
- */
-__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
-{
- return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
-}
-
-
-/**
- \brief Enable External Interrupt
- \details Enables a device-specific interrupt in the NVIC interrupt controller.
- \param [in] IRQn External interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
-{
- NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Disable External Interrupt
- \details Disables a device-specific interrupt in the NVIC interrupt controller.
- \param [in] IRQn External interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
-{
- NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Get Pending Interrupt
- \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
- \param [in] IRQn Interrupt number.
- \return 0 Interrupt status is not pending.
- \return 1 Interrupt status is pending.
- */
-__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
-{
- return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
-}
-
-
-/**
- \brief Set Pending Interrupt
- \details Sets the pending bit of an external interrupt.
- \param [in] IRQn Interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
-{
- NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Clear Pending Interrupt
- \details Clears the pending bit of an external interrupt.
- \param [in] IRQn External interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
-{
- NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Get Active Interrupt
- \details Reads the active register in NVIC and returns the active bit.
- \param [in] IRQn Interrupt number.
- \return 0 Interrupt status is not active.
- \return 1 Interrupt status is active.
- */
-__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
-{
- return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
-}
-
-
-/**
- \brief Set Interrupt Priority
- \details Sets the priority of an interrupt.
- \note The priority cannot be set for every core interrupt.
- \param [in] IRQn Interrupt number.
- \param [in] priority Priority to set.
- */
-__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
-{
- if ((int32_t)(IRQn) < 0)
- {
- SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
- }
- else
- {
- NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
- }
-}
-
-
-/**
- \brief Get Interrupt Priority
- \details Reads the priority of an interrupt.
- The interrupt number can be positive to specify an external (device specific) interrupt,
- or negative to specify an internal (core) interrupt.
- \param [in] IRQn Interrupt number.
- \return Interrupt Priority.
- Value is aligned automatically to the implemented priority bits of the microcontroller.
- */
-__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
-{
-
- if ((int32_t)(IRQn) < 0)
- {
- return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
- }
- else
- {
- return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS)));
- }
-}
-
-
-/**
- \brief Encode Priority
- \details Encodes the priority for an interrupt with the given priority group,
- preemptive priority value, and subpriority value.
- In case of a conflict between priority grouping and available
- priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
- \param [in] PriorityGroup Used priority group.
- \param [in] PreemptPriority Preemptive priority value (starting from 0).
- \param [in] SubPriority Subpriority value (starting from 0).
- \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
- */
-__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
-{
- uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
- uint32_t PreemptPriorityBits;
- uint32_t SubPriorityBits;
-
- PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
- SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
-
- return (
- ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
- ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
- );
-}
-
-
-/**
- \brief Decode Priority
- \details Decodes an interrupt priority value with a given priority group to
- preemptive priority value and subpriority value.
- In case of a conflict between priority grouping and available
- priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
- \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
- \param [in] PriorityGroup Used priority group.
- \param [out] pPreemptPriority Preemptive priority value (starting from 0).
- \param [out] pSubPriority Subpriority value (starting from 0).
- */
-__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
-{
- uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
- uint32_t PreemptPriorityBits;
- uint32_t SubPriorityBits;
-
- PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
- SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
-
- *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
- *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
-}
-
-
-/**
- \brief System Reset
- \details Initiates a system reset request to reset the MCU.
- */
-__STATIC_INLINE void NVIC_SystemReset(void)
-{
- __DSB(); /* Ensure all outstanding memory accesses included
- buffered write are completed before reset */
- SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
- (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
- SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */
- __DSB(); /* Ensure completion of memory access */
-
- for(;;) /* wait until reset */
- {
- __NOP();
- }
-}
-
-/*@} end of CMSIS_Core_NVICFunctions */
-
-
-
-/* ################################## SysTick function ############################################ */
-/**
- \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
- \brief Functions that configure the System.
- @{
- */
-
-#if (__Vendor_SysTickConfig == 0U)
-
-/**
- \brief System Tick Configuration
- \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
- Counter is in free running mode to generate periodic interrupts.
- \param [in] ticks Number of ticks between two interrupts.
- \return 0 Function succeeded.
- \return 1 Function failed.
- \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
- function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
- must contain a vendor-specific implementation of this function.
- */
-__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
-{
- if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
- {
- return (1UL); /* Reload value impossible */
- }
-
- SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
- NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
- SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
- SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
- SysTick_CTRL_TICKINT_Msk |
- SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
- return (0UL); /* Function successful */
-}
-
-#endif
-
-/*@} end of CMSIS_Core_SysTickFunctions */
-
-
-
-/* ##################################### Debug In/Output function ########################################### */
-/**
- \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_core_DebugFunctions ITM Functions
- \brief Functions that access the ITM debug interface.
- @{
- */
-
-extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
-#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
-
-
-/**
- \brief ITM Send Character
- \details Transmits a character via the ITM channel 0, and
- \li Just returns when no debugger is connected that has booked the output.
- \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
- \param [in] ch Character to transmit.
- \returns Character to transmit.
- */
-__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
-{
- if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */
- ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */
- {
- while (ITM->PORT[0U].u32 == 0UL)
- {
- __NOP();
- }
- ITM->PORT[0U].u8 = (uint8_t)ch;
- }
- return (ch);
-}
-
-
-/**
- \brief ITM Receive Character
- \details Inputs a character via the external variable \ref ITM_RxBuffer.
- \return Received character.
- \return -1 No character pending.
- */
-__STATIC_INLINE int32_t ITM_ReceiveChar (void)
-{
- int32_t ch = -1; /* no character available */
-
- if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
- {
- ch = ITM_RxBuffer;
- ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
- }
-
- return (ch);
-}
-
-
-/**
- \brief ITM Check Character
- \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
- \return 0 No character available.
- \return 1 Character available.
- */
-__STATIC_INLINE int32_t ITM_CheckChar (void)
-{
-
- if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
- {
- return (0); /* no character available */
- }
- else
- {
- return (1); /* character available */
- }
-}
-
-/*@} end of CMSIS_core_DebugFunctions */
-
-
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __CORE_CM3_H_DEPENDANT */
-
-#endif /* __CMSIS_GENERIC */
diff --git a/stm32cubemx/Drivers/CMSIS/Include/core_cm4.h b/stm32cubemx/Drivers/CMSIS/Include/core_cm4.h
deleted file mode 100644
index dc840eb..0000000
--- a/stm32cubemx/Drivers/CMSIS/Include/core_cm4.h
+++ /dev/null
@@ -1,1937 +0,0 @@
-/**************************************************************************//**
- * @file core_cm4.h
- * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File
- * @version V4.30
- * @date 20. October 2015
- ******************************************************************************/
-/* Copyright (c) 2009 - 2015 ARM LIMITED
-
- All rights reserved.
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- - Neither the name of ARM nor the names of its contributors may be used
- to endorse or promote products derived from this software without
- specific prior written permission.
- *
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- POSSIBILITY OF SUCH DAMAGE.
- ---------------------------------------------------------------------------*/
-
-
-#if defined ( __ICCARM__ )
- #pragma system_include /* treat file as system include file for MISRA check */
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #pragma clang system_header /* treat file as system include file */
-#endif
-
-#ifndef __CORE_CM4_H_GENERIC
-#define __CORE_CM4_H_GENERIC
-
-#include <stdint.h>
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/**
- \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
- CMSIS violates the following MISRA-C:2004 rules:
-
- \li Required Rule 8.5, object/function definition in header file.<br>
- Function definitions in header files are used to allow 'inlining'.
-
- \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
- Unions are used for effective representation of core registers.
-
- \li Advisory Rule 19.7, Function-like macro defined.<br>
- Function-like macros are used to allow more efficient code.
- */
-
-
-/*******************************************************************************
- * CMSIS definitions
- ******************************************************************************/
-/**
- \ingroup Cortex_M4
- @{
- */
-
-/* CMSIS CM4 definitions */
-#define __CM4_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
-#define __CM4_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
-#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16U) | \
- __CM4_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
-
-#define __CORTEX_M (0x04U) /*!< Cortex-M Core */
-
-
-#if defined ( __CC_ARM )
- #define __ASM __asm /*!< asm keyword for ARM Compiler */
- #define __INLINE __inline /*!< inline keyword for ARM Compiler */
- #define __STATIC_INLINE static __inline
-
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #define __ASM __asm /*!< asm keyword for ARM Compiler */
- #define __INLINE __inline /*!< inline keyword for ARM Compiler */
- #define __STATIC_INLINE static __inline
-
-#elif defined ( __GNUC__ )
- #define __ASM __asm /*!< asm keyword for GNU Compiler */
- #define __INLINE inline /*!< inline keyword for GNU Compiler */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __ICCARM__ )
- #define __ASM __asm /*!< asm keyword for IAR Compiler */
- #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __TMS470__ )
- #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __TASKING__ )
- #define __ASM __asm /*!< asm keyword for TASKING Compiler */
- #define __INLINE inline /*!< inline keyword for TASKING Compiler */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __CSMC__ )
- #define __packed
- #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
- #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
- #define __STATIC_INLINE static inline
-
-#else
- #error Unknown compiler
-#endif
-
-/** __FPU_USED indicates whether an FPU is used or not.
- For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
-*/
-#if defined ( __CC_ARM )
- #if defined __TARGET_FPU_VFP
- #if (__FPU_PRESENT == 1U)
- #define __FPU_USED 1U
- #else
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #define __FPU_USED 0U
- #endif
- #else
- #define __FPU_USED 0U
- #endif
-
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #if defined __ARM_PCS_VFP
- #if (__FPU_PRESENT == 1)
- #define __FPU_USED 1U
- #else
- #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #define __FPU_USED 0U
- #endif
- #else
- #define __FPU_USED 0U
- #endif
-
-#elif defined ( __GNUC__ )
- #if defined (__VFP_FP__) && !defined(__SOFTFP__)
- #if (__FPU_PRESENT == 1U)
- #define __FPU_USED 1U
- #else
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #define __FPU_USED 0U
- #endif
- #else
- #define __FPU_USED 0U
- #endif
-
-#elif defined ( __ICCARM__ )
- #if defined __ARMVFP__
- #if (__FPU_PRESENT == 1U)
- #define __FPU_USED 1U
- #else
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #define __FPU_USED 0U
- #endif
- #else
- #define __FPU_USED 0U
- #endif
-
-#elif defined ( __TMS470__ )
- #if defined __TI_VFP_SUPPORT__
- #if (__FPU_PRESENT == 1U)
- #define __FPU_USED 1U
- #else
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #define __FPU_USED 0U
- #endif
- #else
- #define __FPU_USED 0U
- #endif
-
-#elif defined ( __TASKING__ )
- #if defined __FPU_VFP__
- #if (__FPU_PRESENT == 1U)
- #define __FPU_USED 1U
- #else
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #define __FPU_USED 0U
- #endif
- #else
- #define __FPU_USED 0U
- #endif
-
-#elif defined ( __CSMC__ )
- #if ( __CSMC__ & 0x400U)
- #if (__FPU_PRESENT == 1U)
- #define __FPU_USED 1U
- #else
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #define __FPU_USED 0U
- #endif
- #else
- #define __FPU_USED 0U
- #endif
-
-#endif
-
-#include "core_cmInstr.h" /* Core Instruction Access */
-#include "core_cmFunc.h" /* Core Function Access */
-#include "core_cmSimd.h" /* Compiler specific SIMD Intrinsics */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __CORE_CM4_H_GENERIC */
-
-#ifndef __CMSIS_GENERIC
-
-#ifndef __CORE_CM4_H_DEPENDANT
-#define __CORE_CM4_H_DEPENDANT
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* check device defines and use defaults */
-#if defined __CHECK_DEVICE_DEFINES
- #ifndef __CM4_REV
- #define __CM4_REV 0x0000U
- #warning "__CM4_REV not defined in device header file; using default!"
- #endif
-
- #ifndef __FPU_PRESENT
- #define __FPU_PRESENT 0U
- #warning "__FPU_PRESENT not defined in device header file; using default!"
- #endif
-
- #ifndef __MPU_PRESENT
- #define __MPU_PRESENT 0U
- #warning "__MPU_PRESENT not defined in device header file; using default!"
- #endif
-
- #ifndef __NVIC_PRIO_BITS
- #define __NVIC_PRIO_BITS 4U
- #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
- #endif
-
- #ifndef __Vendor_SysTickConfig
- #define __Vendor_SysTickConfig 0U
- #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
- #endif
-#endif
-
-/* IO definitions (access restrictions to peripheral registers) */
-/**
- \defgroup CMSIS_glob_defs CMSIS Global Defines
-
- <strong>IO Type Qualifiers</strong> are used
- \li to specify the access to peripheral variables.
- \li for automatic generation of peripheral register debug information.
-*/
-#ifdef __cplusplus
- #define __I volatile /*!< Defines 'read only' permissions */
-#else
- #define __I volatile const /*!< Defines 'read only' permissions */
-#endif
-#define __O volatile /*!< Defines 'write only' permissions */
-#define __IO volatile /*!< Defines 'read / write' permissions */
-
-/* following defines should be used for structure members */
-#define __IM volatile const /*! Defines 'read only' structure member permissions */
-#define __OM volatile /*! Defines 'write only' structure member permissions */
-#define __IOM volatile /*! Defines 'read / write' structure member permissions */
-
-/*@} end of group Cortex_M4 */
-
-
-
-/*******************************************************************************
- * Register Abstraction
- Core Register contain:
- - Core Register
- - Core NVIC Register
- - Core SCB Register
- - Core SysTick Register
- - Core Debug Register
- - Core MPU Register
- - Core FPU Register
- ******************************************************************************/
-/**
- \defgroup CMSIS_core_register Defines and Type Definitions
- \brief Type definitions and defines for Cortex-M processor based devices.
-*/
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_CORE Status and Control Registers
- \brief Core Register type definitions.
- @{
- */
-
-/**
- \brief Union type to access the Application Program Status Register (APSR).
- */
-typedef union
-{
- struct
- {
- uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
- uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
- uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
- uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
- uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
- uint32_t C:1; /*!< bit: 29 Carry condition code flag */
- uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
- uint32_t N:1; /*!< bit: 31 Negative condition code flag */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} APSR_Type;
-
-/* APSR Register Definitions */
-#define APSR_N_Pos 31U /*!< APSR: N Position */
-#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
-
-#define APSR_Z_Pos 30U /*!< APSR: Z Position */
-#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
-
-#define APSR_C_Pos 29U /*!< APSR: C Position */
-#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
-
-#define APSR_V_Pos 28U /*!< APSR: V Position */
-#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
-
-#define APSR_Q_Pos 27U /*!< APSR: Q Position */
-#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */
-
-#define APSR_GE_Pos 16U /*!< APSR: GE Position */
-#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */
-
-
-/**
- \brief Union type to access the Interrupt Program Status Register (IPSR).
- */
-typedef union
-{
- struct
- {
- uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
- uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} IPSR_Type;
-
-/* IPSR Register Definitions */
-#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
-#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
-
-
-/**
- \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
- */
-typedef union
-{
- struct
- {
- uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
- uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
- uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
- uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
- uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
- uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
- uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
- uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
- uint32_t C:1; /*!< bit: 29 Carry condition code flag */
- uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
- uint32_t N:1; /*!< bit: 31 Negative condition code flag */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} xPSR_Type;
-
-/* xPSR Register Definitions */
-#define xPSR_N_Pos 31U /*!< xPSR: N Position */
-#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
-
-#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
-#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
-
-#define xPSR_C_Pos 29U /*!< xPSR: C Position */
-#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
-
-#define xPSR_V_Pos 28U /*!< xPSR: V Position */
-#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
-
-#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */
-#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */
-
-#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */
-#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */
-
-#define xPSR_T_Pos 24U /*!< xPSR: T Position */
-#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
-
-#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */
-#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */
-
-#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
-#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
-
-
-/**
- \brief Union type to access the Control Registers (CONTROL).
- */
-typedef union
-{
- struct
- {
- uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
- uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
- uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
- uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} CONTROL_Type;
-
-/* CONTROL Register Definitions */
-#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */
-#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */
-
-#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
-#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
-
-#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
-#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
-
-/*@} end of group CMSIS_CORE */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
- \brief Type definitions for the NVIC Registers
- @{
- */
-
-/**
- \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
- */
-typedef struct
-{
- __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
- uint32_t RESERVED0[24U];
- __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
- uint32_t RSERVED1[24U];
- __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
- uint32_t RESERVED2[24U];
- __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
- uint32_t RESERVED3[24U];
- __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
- uint32_t RESERVED4[56U];
- __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
- uint32_t RESERVED5[644U];
- __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
-} NVIC_Type;
-
-/* Software Triggered Interrupt Register Definitions */
-#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */
-#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */
-
-/*@} end of group CMSIS_NVIC */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_SCB System Control Block (SCB)
- \brief Type definitions for the System Control Block Registers
- @{
- */
-
-/**
- \brief Structure type to access the System Control Block (SCB).
- */
-typedef struct
-{
- __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
- __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
- __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
- __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
- __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
- __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
- __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
- __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
- __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
- __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
- __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
- __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
- __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
- __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
- __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
- __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
- __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
- __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
- __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
- uint32_t RESERVED0[5U];
- __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
-} SCB_Type;
-
-/* SCB CPUID Register Definitions */
-#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
-#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
-
-#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
-#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
-
-#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
-#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
-
-#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
-#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
-
-#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
-#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
-
-/* SCB Interrupt Control State Register Definitions */
-#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
-#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
-
-#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
-#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
-
-#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
-#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
-
-#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
-#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
-
-#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
-#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
-
-#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
-#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
-
-#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
-#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
-
-#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
-#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
-
-#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */
-#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
-
-#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
-#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
-
-/* SCB Vector Table Offset Register Definitions */
-#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
-#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
-
-/* SCB Application Interrupt and Reset Control Register Definitions */
-#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
-#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
-
-#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
-#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
-
-#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
-#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
-
-#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */
-#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
-
-#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
-#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
-
-#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
-#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
-
-#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */
-#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */
-
-/* SCB System Control Register Definitions */
-#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
-#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
-
-#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
-#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
-
-#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
-#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
-
-/* SCB Configuration Control Register Definitions */
-#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
-#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
-
-#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */
-#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
-
-#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */
-#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
-
-#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
-#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
-
-#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */
-#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
-
-#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */
-#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */
-
-/* SCB System Handler Control and State Register Definitions */
-#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */
-#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
-
-#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */
-#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
-
-#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */
-#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
-
-#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
-#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
-
-#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */
-#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
-
-#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */
-#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
-
-#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */
-#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
-
-#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */
-#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
-
-#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */
-#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
-
-#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */
-#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
-
-#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */
-#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
-
-#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */
-#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
-
-#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */
-#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
-
-#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */
-#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */
-
-/* SCB Configurable Fault Status Register Definitions */
-#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */
-#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
-
-#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */
-#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
-
-#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */
-#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
-
-/* SCB Hard Fault Status Register Definitions */
-#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */
-#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
-
-#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */
-#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
-
-#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */
-#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
-
-/* SCB Debug Fault Status Register Definitions */
-#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */
-#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
-
-#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */
-#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
-
-#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */
-#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
-
-#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */
-#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
-
-#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */
-#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */
-
-/*@} end of group CMSIS_SCB */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
- \brief Type definitions for the System Control and ID Register not in the SCB
- @{
- */
-
-/**
- \brief Structure type to access the System Control and ID Register not in the SCB.
- */
-typedef struct
-{
- uint32_t RESERVED0[1U];
- __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
- __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
-} SCnSCB_Type;
-
-/* Interrupt Controller Type Register Definitions */
-#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */
-#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */
-
-/* Auxiliary Control Register Definitions */
-#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */
-#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */
-
-#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */
-#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */
-
-#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */
-#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
-
-#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */
-#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
-
-#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */
-#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */
-
-/*@} end of group CMSIS_SCnotSCB */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_SysTick System Tick Timer (SysTick)
- \brief Type definitions for the System Timer Registers.
- @{
- */
-
-/**
- \brief Structure type to access the System Timer (SysTick).
- */
-typedef struct
-{
- __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
- __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
- __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
- __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
-} SysTick_Type;
-
-/* SysTick Control / Status Register Definitions */
-#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
-#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
-
-#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
-#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
-
-#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
-#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
-
-#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
-#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
-
-/* SysTick Reload Register Definitions */
-#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
-#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
-
-/* SysTick Current Register Definitions */
-#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
-#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
-
-/* SysTick Calibration Register Definitions */
-#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
-#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
-
-#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
-#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
-
-#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
-#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
-
-/*@} end of group CMSIS_SysTick */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
- \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
- @{
- */
-
-/**
- \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
- */
-typedef struct
-{
- __OM union
- {
- __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
- __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
- __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
- } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
- uint32_t RESERVED0[864U];
- __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
- uint32_t RESERVED1[15U];
- __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
- uint32_t RESERVED2[15U];
- __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
- uint32_t RESERVED3[29U];
- __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
- __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
- __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
- uint32_t RESERVED4[43U];
- __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
- __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
- uint32_t RESERVED5[6U];
- __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
- __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
- __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
- __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
- __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
- __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
- __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
- __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
- __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
- __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
- __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
- __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
-} ITM_Type;
-
-/* ITM Trace Privilege Register Definitions */
-#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */
-#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */
-
-/* ITM Trace Control Register Definitions */
-#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */
-#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
-
-#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */
-#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
-
-#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */
-#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
-
-#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */
-#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
-
-#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */
-#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
-
-#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */
-#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
-
-#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */
-#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
-
-#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */
-#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
-
-#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */
-#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */
-
-/* ITM Integration Write Register Definitions */
-#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */
-#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */
-
-/* ITM Integration Read Register Definitions */
-#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */
-#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */
-
-/* ITM Integration Mode Control Register Definitions */
-#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */
-#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */
-
-/* ITM Lock Status Register Definitions */
-#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */
-#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
-
-#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */
-#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
-
-#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */
-#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */
-
-/*@}*/ /* end of group CMSIS_ITM */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
- \brief Type definitions for the Data Watchpoint and Trace (DWT)
- @{
- */
-
-/**
- \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
- */
-typedef struct
-{
- __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
- __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
- __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
- __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
- __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
- __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
- __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
- __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
- __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
- __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
- __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
- uint32_t RESERVED0[1U];
- __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
- __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
- __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
- uint32_t RESERVED1[1U];
- __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
- __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
- __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
- uint32_t RESERVED2[1U];
- __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
- __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
- __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
-} DWT_Type;
-
-/* DWT Control Register Definitions */
-#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */
-#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
-
-#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */
-#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
-
-#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */
-#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
-
-#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */
-#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
-
-#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */
-#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
-
-#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */
-#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
-
-#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */
-#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
-
-#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */
-#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
-
-#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */
-#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
-
-#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */
-#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
-
-#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */
-#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
-
-#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */
-#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
-
-#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */
-#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
-
-#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */
-#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
-
-#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */
-#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
-
-#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */
-#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
-
-#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */
-#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
-
-#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */
-#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */
-
-/* DWT CPI Count Register Definitions */
-#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */
-#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */
-
-/* DWT Exception Overhead Count Register Definitions */
-#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */
-#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */
-
-/* DWT Sleep Count Register Definitions */
-#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */
-#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
-
-/* DWT LSU Count Register Definitions */
-#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */
-#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */
-
-/* DWT Folded-instruction Count Register Definitions */
-#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */
-#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */
-
-/* DWT Comparator Mask Register Definitions */
-#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */
-#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */
-
-/* DWT Comparator Function Register Definitions */
-#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */
-#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
-
-#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */
-#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
-
-#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */
-#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
-
-#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */
-#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
-
-#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */
-#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
-
-#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */
-#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
-
-#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */
-#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
-
-#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */
-#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
-
-#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */
-#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */
-
-/*@}*/ /* end of group CMSIS_DWT */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_TPI Trace Port Interface (TPI)
- \brief Type definitions for the Trace Port Interface (TPI)
- @{
- */
-
-/**
- \brief Structure type to access the Trace Port Interface Register (TPI).
- */
-typedef struct
-{
- __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
- __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
- uint32_t RESERVED0[2U];
- __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
- uint32_t RESERVED1[55U];
- __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
- uint32_t RESERVED2[131U];
- __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
- __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
- __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
- uint32_t RESERVED3[759U];
- __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
- __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
- __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
- uint32_t RESERVED4[1U];
- __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
- __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
- __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
- uint32_t RESERVED5[39U];
- __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
- __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
- uint32_t RESERVED7[8U];
- __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
- __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
-} TPI_Type;
-
-/* TPI Asynchronous Clock Prescaler Register Definitions */
-#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */
-#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */
-
-/* TPI Selected Pin Protocol Register Definitions */
-#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */
-#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */
-
-/* TPI Formatter and Flush Status Register Definitions */
-#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */
-#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
-
-#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */
-#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
-
-#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */
-#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
-
-#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */
-#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */
-
-/* TPI Formatter and Flush Control Register Definitions */
-#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */
-#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
-
-#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */
-#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
-
-/* TPI TRIGGER Register Definitions */
-#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */
-#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */
-
-/* TPI Integration ETM Data Register Definitions (FIFO0) */
-#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */
-#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
-
-#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */
-#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
-
-#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */
-#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
-
-#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */
-#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
-
-#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */
-#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
-
-#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */
-#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
-
-#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */
-#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */
-
-/* TPI ITATBCTR2 Register Definitions */
-#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */
-#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */
-
-/* TPI Integration ITM Data Register Definitions (FIFO1) */
-#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */
-#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
-
-#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */
-#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
-
-#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */
-#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
-
-#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */
-#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
-
-#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */
-#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
-
-#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */
-#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
-
-#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */
-#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */
-
-/* TPI ITATBCTR0 Register Definitions */
-#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */
-#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */
-
-/* TPI Integration Mode Control Register Definitions */
-#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */
-#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */
-
-/* TPI DEVID Register Definitions */
-#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */
-#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
-
-#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */
-#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
-
-#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */
-#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
-
-#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */
-#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
-
-#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */
-#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
-
-#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */
-#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */
-
-/* TPI DEVTYPE Register Definitions */
-#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */
-#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
-
-#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */
-#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */
-
-/*@}*/ /* end of group CMSIS_TPI */
-
-
-#if (__MPU_PRESENT == 1U)
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_MPU Memory Protection Unit (MPU)
- \brief Type definitions for the Memory Protection Unit (MPU)
- @{
- */
-
-/**
- \brief Structure type to access the Memory Protection Unit (MPU).
- */
-typedef struct
-{
- __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
- __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
- __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
- __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
- __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
- __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
- __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
- __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
- __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
- __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
- __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
-} MPU_Type;
-
-/* MPU Type Register Definitions */
-#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
-#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
-
-#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
-#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
-
-#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
-#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
-
-/* MPU Control Register Definitions */
-#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
-#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
-
-#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
-#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
-
-#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
-#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
-
-/* MPU Region Number Register Definitions */
-#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
-#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
-
-/* MPU Region Base Address Register Definitions */
-#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */
-#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
-
-#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
-#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
-
-#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
-#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
-
-/* MPU Region Attribute and Size Register Definitions */
-#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
-#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
-
-#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
-#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
-
-#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
-#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
-
-#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
-#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
-
-#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
-#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
-
-#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
-#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
-
-#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
-#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
-
-#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
-#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
-
-#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
-#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
-
-#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
-#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
-
-/*@} end of group CMSIS_MPU */
-#endif
-
-
-#if (__FPU_PRESENT == 1U)
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_FPU Floating Point Unit (FPU)
- \brief Type definitions for the Floating Point Unit (FPU)
- @{
- */
-
-/**
- \brief Structure type to access the Floating Point Unit (FPU).
- */
-typedef struct
-{
- uint32_t RESERVED0[1U];
- __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
- __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
- __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
- __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
- __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
-} FPU_Type;
-
-/* Floating-Point Context Control Register Definitions */
-#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */
-#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
-
-#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */
-#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
-
-#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */
-#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
-
-#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */
-#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
-
-#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */
-#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
-
-#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */
-#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
-
-#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */
-#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
-
-#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */
-#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
-
-#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */
-#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */
-
-/* Floating-Point Context Address Register Definitions */
-#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */
-#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
-
-/* Floating-Point Default Status Control Register Definitions */
-#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */
-#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
-
-#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */
-#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
-
-#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */
-#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
-
-#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */
-#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
-
-/* Media and FP Feature Register 0 Definitions */
-#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */
-#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
-
-#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */
-#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
-
-#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */
-#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
-
-#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */
-#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
-
-#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */
-#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
-
-#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */
-#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
-
-#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */
-#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
-
-#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */
-#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */
-
-/* Media and FP Feature Register 1 Definitions */
-#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */
-#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
-
-#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */
-#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
-
-#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */
-#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
-
-#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */
-#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */
-
-/*@} end of group CMSIS_FPU */
-#endif
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
- \brief Type definitions for the Core Debug Registers
- @{
- */
-
-/**
- \brief Structure type to access the Core Debug Register (CoreDebug).
- */
-typedef struct
-{
- __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
- __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
- __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
- __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
-} CoreDebug_Type;
-
-/* Debug Halting Control and Status Register Definitions */
-#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */
-#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
-
-#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */
-#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
-
-#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
-#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
-
-#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */
-#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
-
-#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */
-#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
-
-#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */
-#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
-
-#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */
-#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
-
-#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
-#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
-
-#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */
-#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
-
-#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */
-#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
-
-#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */
-#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
-
-#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */
-#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
-
-/* Debug Core Register Selector Register Definitions */
-#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */
-#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
-
-#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */
-#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */
-
-/* Debug Exception and Monitor Control Register Definitions */
-#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */
-#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
-
-#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */
-#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
-
-#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */
-#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
-
-#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */
-#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
-
-#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */
-#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
-
-#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */
-#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
-
-#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */
-#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
-
-#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */
-#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
-
-#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */
-#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
-
-#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */
-#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
-
-#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */
-#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
-
-#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */
-#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
-
-#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */
-#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
-
-/*@} end of group CMSIS_CoreDebug */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_core_bitfield Core register bit field macros
- \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
- @{
- */
-
-/**
- \brief Mask and shift a bit field value for use in a register bit range.
- \param[in] field Name of the register bit field.
- \param[in] value Value of the bit field.
- \return Masked and shifted value.
-*/
-#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
-
-/**
- \brief Mask and shift a register value to extract a bit filed value.
- \param[in] field Name of the register bit field.
- \param[in] value Value of register.
- \return Masked and shifted bit field value.
-*/
-#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
-
-/*@} end of group CMSIS_core_bitfield */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_core_base Core Definitions
- \brief Definitions for base addresses, unions, and structures.
- @{
- */
-
-/* Memory mapping of Cortex-M4 Hardware */
-#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
-#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
-#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
-#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
-#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
-#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
-#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
-#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
-
-#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
-#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
-#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
-#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
-#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
-#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
-#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
-#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
-
-#if (__MPU_PRESENT == 1U)
- #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
- #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
-#endif
-
-#if (__FPU_PRESENT == 1U)
- #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
- #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
-#endif
-
-/*@} */
-
-
-
-/*******************************************************************************
- * Hardware Abstraction Layer
- Core Function Interface contains:
- - Core NVIC Functions
- - Core SysTick Functions
- - Core Debug Functions
- - Core Register Access Functions
- ******************************************************************************/
-/**
- \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
-*/
-
-
-
-/* ########################## NVIC functions #################################### */
-/**
- \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_NVICFunctions NVIC Functions
- \brief Functions that manage interrupts and exceptions via the NVIC.
- @{
- */
-
-/**
- \brief Set Priority Grouping
- \details Sets the priority grouping field using the required unlock sequence.
- The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
- Only values from 0..7 are used.
- In case of a conflict between priority grouping and available
- priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
- \param [in] PriorityGroup Priority grouping field.
- */
-__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
-{
- uint32_t reg_value;
- uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
-
- reg_value = SCB->AIRCR; /* read old register configuration */
- reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */
- reg_value = (reg_value |
- ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
- (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */
- SCB->AIRCR = reg_value;
-}
-
-
-/**
- \brief Get Priority Grouping
- \details Reads the priority grouping field from the NVIC Interrupt Controller.
- \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
- */
-__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
-{
- return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
-}
-
-
-/**
- \brief Enable External Interrupt
- \details Enables a device-specific interrupt in the NVIC interrupt controller.
- \param [in] IRQn External interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
-{
- NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Disable External Interrupt
- \details Disables a device-specific interrupt in the NVIC interrupt controller.
- \param [in] IRQn External interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
-{
- NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Get Pending Interrupt
- \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
- \param [in] IRQn Interrupt number.
- \return 0 Interrupt status is not pending.
- \return 1 Interrupt status is pending.
- */
-__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
-{
- return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
-}
-
-
-/**
- \brief Set Pending Interrupt
- \details Sets the pending bit of an external interrupt.
- \param [in] IRQn Interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
-{
- NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Clear Pending Interrupt
- \details Clears the pending bit of an external interrupt.
- \param [in] IRQn External interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
-{
- NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Get Active Interrupt
- \details Reads the active register in NVIC and returns the active bit.
- \param [in] IRQn Interrupt number.
- \return 0 Interrupt status is not active.
- \return 1 Interrupt status is active.
- */
-__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
-{
- return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
-}
-
-
-/**
- \brief Set Interrupt Priority
- \details Sets the priority of an interrupt.
- \note The priority cannot be set for every core interrupt.
- \param [in] IRQn Interrupt number.
- \param [in] priority Priority to set.
- */
-__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
-{
- if ((int32_t)(IRQn) < 0)
- {
- SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
- }
- else
- {
- NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
- }
-}
-
-
-/**
- \brief Get Interrupt Priority
- \details Reads the priority of an interrupt.
- The interrupt number can be positive to specify an external (device specific) interrupt,
- or negative to specify an internal (core) interrupt.
- \param [in] IRQn Interrupt number.
- \return Interrupt Priority.
- Value is aligned automatically to the implemented priority bits of the microcontroller.
- */
-__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
-{
-
- if ((int32_t)(IRQn) < 0)
- {
- return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
- }
- else
- {
- return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS)));
- }
-}
-
-
-/**
- \brief Encode Priority
- \details Encodes the priority for an interrupt with the given priority group,
- preemptive priority value, and subpriority value.
- In case of a conflict between priority grouping and available
- priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
- \param [in] PriorityGroup Used priority group.
- \param [in] PreemptPriority Preemptive priority value (starting from 0).
- \param [in] SubPriority Subpriority value (starting from 0).
- \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
- */
-__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
-{
- uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
- uint32_t PreemptPriorityBits;
- uint32_t SubPriorityBits;
-
- PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
- SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
-
- return (
- ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
- ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
- );
-}
-
-
-/**
- \brief Decode Priority
- \details Decodes an interrupt priority value with a given priority group to
- preemptive priority value and subpriority value.
- In case of a conflict between priority grouping and available
- priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
- \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
- \param [in] PriorityGroup Used priority group.
- \param [out] pPreemptPriority Preemptive priority value (starting from 0).
- \param [out] pSubPriority Subpriority value (starting from 0).
- */
-__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
-{
- uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
- uint32_t PreemptPriorityBits;
- uint32_t SubPriorityBits;
-
- PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
- SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
-
- *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
- *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
-}
-
-
-/**
- \brief System Reset
- \details Initiates a system reset request to reset the MCU.
- */
-__STATIC_INLINE void NVIC_SystemReset(void)
-{
- __DSB(); /* Ensure all outstanding memory accesses included
- buffered write are completed before reset */
- SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
- (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
- SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */
- __DSB(); /* Ensure completion of memory access */
-
- for(;;) /* wait until reset */
- {
- __NOP();
- }
-}
-
-/*@} end of CMSIS_Core_NVICFunctions */
-
-
-
-/* ################################## SysTick function ############################################ */
-/**
- \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
- \brief Functions that configure the System.
- @{
- */
-
-#if (__Vendor_SysTickConfig == 0U)
-
-/**
- \brief System Tick Configuration
- \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
- Counter is in free running mode to generate periodic interrupts.
- \param [in] ticks Number of ticks between two interrupts.
- \return 0 Function succeeded.
- \return 1 Function failed.
- \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
- function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
- must contain a vendor-specific implementation of this function.
- */
-__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
-{
- if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
- {
- return (1UL); /* Reload value impossible */
- }
-
- SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
- NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
- SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
- SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
- SysTick_CTRL_TICKINT_Msk |
- SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
- return (0UL); /* Function successful */
-}
-
-#endif
-
-/*@} end of CMSIS_Core_SysTickFunctions */
-
-
-
-/* ##################################### Debug In/Output function ########################################### */
-/**
- \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_core_DebugFunctions ITM Functions
- \brief Functions that access the ITM debug interface.
- @{
- */
-
-extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
-#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
-
-
-/**
- \brief ITM Send Character
- \details Transmits a character via the ITM channel 0, and
- \li Just returns when no debugger is connected that has booked the output.
- \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
- \param [in] ch Character to transmit.
- \returns Character to transmit.
- */
-__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
-{
- if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */
- ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */
- {
- while (ITM->PORT[0U].u32 == 0UL)
- {
- __NOP();
- }
- ITM->PORT[0U].u8 = (uint8_t)ch;
- }
- return (ch);
-}
-
-
-/**
- \brief ITM Receive Character
- \details Inputs a character via the external variable \ref ITM_RxBuffer.
- \return Received character.
- \return -1 No character pending.
- */
-__STATIC_INLINE int32_t ITM_ReceiveChar (void)
-{
- int32_t ch = -1; /* no character available */
-
- if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
- {
- ch = ITM_RxBuffer;
- ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
- }
-
- return (ch);
-}
-
-
-/**
- \brief ITM Check Character
- \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
- \return 0 No character available.
- \return 1 Character available.
- */
-__STATIC_INLINE int32_t ITM_CheckChar (void)
-{
-
- if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
- {
- return (0); /* no character available */
- }
- else
- {
- return (1); /* character available */
- }
-}
-
-/*@} end of CMSIS_core_DebugFunctions */
-
-
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __CORE_CM4_H_DEPENDANT */
-
-#endif /* __CMSIS_GENERIC */
diff --git a/stm32cubemx/Drivers/CMSIS/Include/core_cm7.h b/stm32cubemx/Drivers/CMSIS/Include/core_cm7.h
deleted file mode 100644
index 3b7530a..0000000
--- a/stm32cubemx/Drivers/CMSIS/Include/core_cm7.h
+++ /dev/null
@@ -1,2512 +0,0 @@
-/**************************************************************************//**
- * @file core_cm7.h
- * @brief CMSIS Cortex-M7 Core Peripheral Access Layer Header File
- * @version V4.30
- * @date 20. October 2015
- ******************************************************************************/
-/* Copyright (c) 2009 - 2015 ARM LIMITED
-
- All rights reserved.
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- - Neither the name of ARM nor the names of its contributors may be used
- to endorse or promote products derived from this software without
- specific prior written permission.
- *
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- POSSIBILITY OF SUCH DAMAGE.
- ---------------------------------------------------------------------------*/
-
-
-#if defined ( __ICCARM__ )
- #pragma system_include /* treat file as system include file for MISRA check */
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #pragma clang system_header /* treat file as system include file */
-#endif
-
-#ifndef __CORE_CM7_H_GENERIC
-#define __CORE_CM7_H_GENERIC
-
-#include <stdint.h>
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/**
- \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
- CMSIS violates the following MISRA-C:2004 rules:
-
- \li Required Rule 8.5, object/function definition in header file.<br>
- Function definitions in header files are used to allow 'inlining'.
-
- \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
- Unions are used for effective representation of core registers.
-
- \li Advisory Rule 19.7, Function-like macro defined.<br>
- Function-like macros are used to allow more efficient code.
- */
-
-
-/*******************************************************************************
- * CMSIS definitions
- ******************************************************************************/
-/**
- \ingroup Cortex_M7
- @{
- */
-
-/* CMSIS CM7 definitions */
-#define __CM7_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
-#define __CM7_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
-#define __CM7_CMSIS_VERSION ((__CM7_CMSIS_VERSION_MAIN << 16U) | \
- __CM7_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
-
-#define __CORTEX_M (0x07U) /*!< Cortex-M Core */
-
-
-#if defined ( __CC_ARM )
- #define __ASM __asm /*!< asm keyword for ARM Compiler */
- #define __INLINE __inline /*!< inline keyword for ARM Compiler */
- #define __STATIC_INLINE static __inline
-
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #define __ASM __asm /*!< asm keyword for ARM Compiler */
- #define __INLINE __inline /*!< inline keyword for ARM Compiler */
- #define __STATIC_INLINE static __inline
-
-#elif defined ( __GNUC__ )
- #define __ASM __asm /*!< asm keyword for GNU Compiler */
- #define __INLINE inline /*!< inline keyword for GNU Compiler */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __ICCARM__ )
- #define __ASM __asm /*!< asm keyword for IAR Compiler */
- #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __TMS470__ )
- #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __TASKING__ )
- #define __ASM __asm /*!< asm keyword for TASKING Compiler */
- #define __INLINE inline /*!< inline keyword for TASKING Compiler */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __CSMC__ )
- #define __packed
- #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
- #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
- #define __STATIC_INLINE static inline
-
-#else
- #error Unknown compiler
-#endif
-
-/** __FPU_USED indicates whether an FPU is used or not.
- For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
-*/
-#if defined ( __CC_ARM )
- #if defined __TARGET_FPU_VFP
- #if (__FPU_PRESENT == 1U)
- #define __FPU_USED 1U
- #else
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #define __FPU_USED 0U
- #endif
- #else
- #define __FPU_USED 0U
- #endif
-
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #if defined __ARM_PCS_VFP
- #if (__FPU_PRESENT == 1)
- #define __FPU_USED 1U
- #else
- #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #define __FPU_USED 0U
- #endif
- #else
- #define __FPU_USED 0U
- #endif
-
-#elif defined ( __GNUC__ )
- #if defined (__VFP_FP__) && !defined(__SOFTFP__)
- #if (__FPU_PRESENT == 1U)
- #define __FPU_USED 1U
- #else
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #define __FPU_USED 0U
- #endif
- #else
- #define __FPU_USED 0U
- #endif
-
-#elif defined ( __ICCARM__ )
- #if defined __ARMVFP__
- #if (__FPU_PRESENT == 1U)
- #define __FPU_USED 1U
- #else
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #define __FPU_USED 0U
- #endif
- #else
- #define __FPU_USED 0U
- #endif
-
-#elif defined ( __TMS470__ )
- #if defined __TI_VFP_SUPPORT__
- #if (__FPU_PRESENT == 1U)
- #define __FPU_USED 1U
- #else
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #define __FPU_USED 0U
- #endif
- #else
- #define __FPU_USED 0U
- #endif
-
-#elif defined ( __TASKING__ )
- #if defined __FPU_VFP__
- #if (__FPU_PRESENT == 1U)
- #define __FPU_USED 1U
- #else
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #define __FPU_USED 0U
- #endif
- #else
- #define __FPU_USED 0U
- #endif
-
-#elif defined ( __CSMC__ )
- #if ( __CSMC__ & 0x400U)
- #if (__FPU_PRESENT == 1U)
- #define __FPU_USED 1U
- #else
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #define __FPU_USED 0U
- #endif
- #else
- #define __FPU_USED 0U
- #endif
-
-#endif
-
-#include "core_cmInstr.h" /* Core Instruction Access */
-#include "core_cmFunc.h" /* Core Function Access */
-#include "core_cmSimd.h" /* Compiler specific SIMD Intrinsics */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __CORE_CM7_H_GENERIC */
-
-#ifndef __CMSIS_GENERIC
-
-#ifndef __CORE_CM7_H_DEPENDANT
-#define __CORE_CM7_H_DEPENDANT
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* check device defines and use defaults */
-#if defined __CHECK_DEVICE_DEFINES
- #ifndef __CM7_REV
- #define __CM7_REV 0x0000U
- #warning "__CM7_REV not defined in device header file; using default!"
- #endif
-
- #ifndef __FPU_PRESENT
- #define __FPU_PRESENT 0U
- #warning "__FPU_PRESENT not defined in device header file; using default!"
- #endif
-
- #ifndef __MPU_PRESENT
- #define __MPU_PRESENT 0U
- #warning "__MPU_PRESENT not defined in device header file; using default!"
- #endif
-
- #ifndef __ICACHE_PRESENT
- #define __ICACHE_PRESENT 0U
- #warning "__ICACHE_PRESENT not defined in device header file; using default!"
- #endif
-
- #ifndef __DCACHE_PRESENT
- #define __DCACHE_PRESENT 0U
- #warning "__DCACHE_PRESENT not defined in device header file; using default!"
- #endif
-
- #ifndef __DTCM_PRESENT
- #define __DTCM_PRESENT 0U
- #warning "__DTCM_PRESENT not defined in device header file; using default!"
- #endif
-
- #ifndef __NVIC_PRIO_BITS
- #define __NVIC_PRIO_BITS 3U
- #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
- #endif
-
- #ifndef __Vendor_SysTickConfig
- #define __Vendor_SysTickConfig 0U
- #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
- #endif
-#endif
-
-/* IO definitions (access restrictions to peripheral registers) */
-/**
- \defgroup CMSIS_glob_defs CMSIS Global Defines
-
- <strong>IO Type Qualifiers</strong> are used
- \li to specify the access to peripheral variables.
- \li for automatic generation of peripheral register debug information.
-*/
-#ifdef __cplusplus
- #define __I volatile /*!< Defines 'read only' permissions */
-#else
- #define __I volatile const /*!< Defines 'read only' permissions */
-#endif
-#define __O volatile /*!< Defines 'write only' permissions */
-#define __IO volatile /*!< Defines 'read / write' permissions */
-
-/* following defines should be used for structure members */
-#define __IM volatile const /*! Defines 'read only' structure member permissions */
-#define __OM volatile /*! Defines 'write only' structure member permissions */
-#define __IOM volatile /*! Defines 'read / write' structure member permissions */
-
-/*@} end of group Cortex_M7 */
-
-
-
-/*******************************************************************************
- * Register Abstraction
- Core Register contain:
- - Core Register
- - Core NVIC Register
- - Core SCB Register
- - Core SysTick Register
- - Core Debug Register
- - Core MPU Register
- - Core FPU Register
- ******************************************************************************/
-/**
- \defgroup CMSIS_core_register Defines and Type Definitions
- \brief Type definitions and defines for Cortex-M processor based devices.
-*/
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_CORE Status and Control Registers
- \brief Core Register type definitions.
- @{
- */
-
-/**
- \brief Union type to access the Application Program Status Register (APSR).
- */
-typedef union
-{
- struct
- {
- uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
- uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
- uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
- uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
- uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
- uint32_t C:1; /*!< bit: 29 Carry condition code flag */
- uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
- uint32_t N:1; /*!< bit: 31 Negative condition code flag */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} APSR_Type;
-
-/* APSR Register Definitions */
-#define APSR_N_Pos 31U /*!< APSR: N Position */
-#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
-
-#define APSR_Z_Pos 30U /*!< APSR: Z Position */
-#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
-
-#define APSR_C_Pos 29U /*!< APSR: C Position */
-#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
-
-#define APSR_V_Pos 28U /*!< APSR: V Position */
-#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
-
-#define APSR_Q_Pos 27U /*!< APSR: Q Position */
-#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */
-
-#define APSR_GE_Pos 16U /*!< APSR: GE Position */
-#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */
-
-
-/**
- \brief Union type to access the Interrupt Program Status Register (IPSR).
- */
-typedef union
-{
- struct
- {
- uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
- uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} IPSR_Type;
-
-/* IPSR Register Definitions */
-#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
-#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
-
-
-/**
- \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
- */
-typedef union
-{
- struct
- {
- uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
- uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
- uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
- uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
- uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
- uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
- uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
- uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
- uint32_t C:1; /*!< bit: 29 Carry condition code flag */
- uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
- uint32_t N:1; /*!< bit: 31 Negative condition code flag */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} xPSR_Type;
-
-/* xPSR Register Definitions */
-#define xPSR_N_Pos 31U /*!< xPSR: N Position */
-#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
-
-#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
-#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
-
-#define xPSR_C_Pos 29U /*!< xPSR: C Position */
-#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
-
-#define xPSR_V_Pos 28U /*!< xPSR: V Position */
-#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
-
-#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */
-#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */
-
-#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */
-#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */
-
-#define xPSR_T_Pos 24U /*!< xPSR: T Position */
-#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
-
-#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */
-#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */
-
-#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
-#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
-
-
-/**
- \brief Union type to access the Control Registers (CONTROL).
- */
-typedef union
-{
- struct
- {
- uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
- uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
- uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
- uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} CONTROL_Type;
-
-/* CONTROL Register Definitions */
-#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */
-#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */
-
-#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
-#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
-
-#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
-#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
-
-/*@} end of group CMSIS_CORE */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
- \brief Type definitions for the NVIC Registers
- @{
- */
-
-/**
- \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
- */
-typedef struct
-{
- __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
- uint32_t RESERVED0[24U];
- __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
- uint32_t RSERVED1[24U];
- __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
- uint32_t RESERVED2[24U];
- __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
- uint32_t RESERVED3[24U];
- __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
- uint32_t RESERVED4[56U];
- __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
- uint32_t RESERVED5[644U];
- __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
-} NVIC_Type;
-
-/* Software Triggered Interrupt Register Definitions */
-#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */
-#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */
-
-/*@} end of group CMSIS_NVIC */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_SCB System Control Block (SCB)
- \brief Type definitions for the System Control Block Registers
- @{
- */
-
-/**
- \brief Structure type to access the System Control Block (SCB).
- */
-typedef struct
-{
- __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
- __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
- __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
- __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
- __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
- __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
- __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
- __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
- __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
- __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
- __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
- __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
- __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
- __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
- __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
- __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
- __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
- __IM uint32_t ID_MFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
- __IM uint32_t ID_ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
- uint32_t RESERVED0[1U];
- __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */
- __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */
- __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */
- __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */
- __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
- uint32_t RESERVED3[93U];
- __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */
- uint32_t RESERVED4[15U];
- __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */
- __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */
- __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 1 */
- uint32_t RESERVED5[1U];
- __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */
- uint32_t RESERVED6[1U];
- __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */
- __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */
- __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */
- __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */
- __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */
- __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */
- __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */
- __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */
- uint32_t RESERVED7[6U];
- __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */
- __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */
- __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */
- __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */
- __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */
- uint32_t RESERVED8[1U];
- __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */
-} SCB_Type;
-
-/* SCB CPUID Register Definitions */
-#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
-#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
-
-#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
-#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
-
-#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
-#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
-
-#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
-#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
-
-#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
-#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
-
-/* SCB Interrupt Control State Register Definitions */
-#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
-#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
-
-#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
-#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
-
-#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
-#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
-
-#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
-#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
-
-#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
-#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
-
-#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
-#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
-
-#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
-#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
-
-#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
-#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
-
-#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */
-#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
-
-#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
-#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
-
-/* SCB Vector Table Offset Register Definitions */
-#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
-#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
-
-/* SCB Application Interrupt and Reset Control Register Definitions */
-#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
-#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
-
-#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
-#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
-
-#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
-#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
-
-#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */
-#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
-
-#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
-#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
-
-#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
-#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
-
-#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */
-#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */
-
-/* SCB System Control Register Definitions */
-#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
-#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
-
-#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
-#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
-
-#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
-#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
-
-/* SCB Configuration Control Register Definitions */
-#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: Branch prediction enable bit Position */
-#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: Branch prediction enable bit Mask */
-
-#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: Instruction cache enable bit Position */
-#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: Instruction cache enable bit Mask */
-
-#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: Cache enable bit Position */
-#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: Cache enable bit Mask */
-
-#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
-#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
-
-#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */
-#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
-
-#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */
-#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
-
-#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
-#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
-
-#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */
-#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
-
-#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */
-#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */
-
-/* SCB System Handler Control and State Register Definitions */
-#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */
-#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
-
-#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */
-#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
-
-#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */
-#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
-
-#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
-#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
-
-#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */
-#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
-
-#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */
-#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
-
-#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */
-#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
-
-#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */
-#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
-
-#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */
-#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
-
-#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */
-#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
-
-#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */
-#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
-
-#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */
-#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
-
-#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */
-#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
-
-#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */
-#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */
-
-/* SCB Configurable Fault Status Register Definitions */
-#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */
-#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
-
-#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */
-#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
-
-#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */
-#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
-
-/* SCB Hard Fault Status Register Definitions */
-#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */
-#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
-
-#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */
-#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
-
-#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */
-#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
-
-/* SCB Debug Fault Status Register Definitions */
-#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */
-#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
-
-#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */
-#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
-
-#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */
-#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
-
-#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */
-#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
-
-#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */
-#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */
-
-/* SCB Cache Level ID Register Definitions */
-#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */
-#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */
-
-#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */
-#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */
-
-/* SCB Cache Type Register Definitions */
-#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */
-#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */
-
-#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */
-#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */
-
-#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */
-#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */
-
-#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */
-#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */
-
-#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */
-#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */
-
-/* SCB Cache Size ID Register Definitions */
-#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */
-#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */
-
-#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */
-#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */
-
-#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */
-#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */
-
-#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */
-#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */
-
-#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */
-#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */
-
-#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */
-#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */
-
-#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */
-#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */
-
-/* SCB Cache Size Selection Register Definitions */
-#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */
-#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */
-
-#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */
-#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */
-
-/* SCB Software Triggered Interrupt Register Definitions */
-#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */
-#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */
-
-/* SCB D-Cache Invalidate by Set-way Register Definitions */
-#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */
-#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */
-
-#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */
-#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */
-
-/* SCB D-Cache Clean by Set-way Register Definitions */
-#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */
-#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */
-
-#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */
-#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */
-
-/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */
-#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */
-#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */
-
-#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */
-#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */
-
-/* Instruction Tightly-Coupled Memory Control Register Definitions */
-#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */
-#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */
-
-#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */
-#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */
-
-#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */
-#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */
-
-#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */
-#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */
-
-/* Data Tightly-Coupled Memory Control Register Definitions */
-#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */
-#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */
-
-#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */
-#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */
-
-#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */
-#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */
-
-#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */
-#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */
-
-/* AHBP Control Register Definitions */
-#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */
-#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */
-
-#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */
-#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */
-
-/* L1 Cache Control Register Definitions */
-#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */
-#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */
-
-#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */
-#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */
-
-#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */
-#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */
-
-/* AHBS Control Register Definitions */
-#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */
-#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */
-
-#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */
-#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */
-
-#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/
-#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */
-
-/* Auxiliary Bus Fault Status Register Definitions */
-#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/
-#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */
-
-#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/
-#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */
-
-#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/
-#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */
-
-#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/
-#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */
-
-#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/
-#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */
-
-#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/
-#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */
-
-/*@} end of group CMSIS_SCB */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
- \brief Type definitions for the System Control and ID Register not in the SCB
- @{
- */
-
-/**
- \brief Structure type to access the System Control and ID Register not in the SCB.
- */
-typedef struct
-{
- uint32_t RESERVED0[1U];
- __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
- __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
-} SCnSCB_Type;
-
-/* Interrupt Controller Type Register Definitions */
-#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */
-#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */
-
-/* Auxiliary Control Register Definitions */
-#define SCnSCB_ACTLR_DISITMATBFLUSH_Pos 12U /*!< ACTLR: DISITMATBFLUSH Position */
-#define SCnSCB_ACTLR_DISITMATBFLUSH_Msk (1UL << SCnSCB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */
-
-#define SCnSCB_ACTLR_DISRAMODE_Pos 11U /*!< ACTLR: DISRAMODE Position */
-#define SCnSCB_ACTLR_DISRAMODE_Msk (1UL << SCnSCB_ACTLR_DISRAMODE_Pos) /*!< ACTLR: DISRAMODE Mask */
-
-#define SCnSCB_ACTLR_FPEXCODIS_Pos 10U /*!< ACTLR: FPEXCODIS Position */
-#define SCnSCB_ACTLR_FPEXCODIS_Msk (1UL << SCnSCB_ACTLR_FPEXCODIS_Pos) /*!< ACTLR: FPEXCODIS Mask */
-
-#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */
-#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
-
-#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */
-#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */
-
-/*@} end of group CMSIS_SCnotSCB */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_SysTick System Tick Timer (SysTick)
- \brief Type definitions for the System Timer Registers.
- @{
- */
-
-/**
- \brief Structure type to access the System Timer (SysTick).
- */
-typedef struct
-{
- __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
- __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
- __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
- __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
-} SysTick_Type;
-
-/* SysTick Control / Status Register Definitions */
-#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
-#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
-
-#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
-#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
-
-#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
-#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
-
-#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
-#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
-
-/* SysTick Reload Register Definitions */
-#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
-#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
-
-/* SysTick Current Register Definitions */
-#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
-#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
-
-/* SysTick Calibration Register Definitions */
-#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
-#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
-
-#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
-#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
-
-#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
-#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
-
-/*@} end of group CMSIS_SysTick */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
- \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
- @{
- */
-
-/**
- \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
- */
-typedef struct
-{
- __OM union
- {
- __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
- __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
- __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
- } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
- uint32_t RESERVED0[864U];
- __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
- uint32_t RESERVED1[15U];
- __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
- uint32_t RESERVED2[15U];
- __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
- uint32_t RESERVED3[29U];
- __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
- __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
- __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
- uint32_t RESERVED4[43U];
- __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
- __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
- uint32_t RESERVED5[6U];
- __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
- __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
- __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
- __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
- __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
- __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
- __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
- __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
- __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
- __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
- __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
- __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
-} ITM_Type;
-
-/* ITM Trace Privilege Register Definitions */
-#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */
-#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */
-
-/* ITM Trace Control Register Definitions */
-#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */
-#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
-
-#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */
-#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
-
-#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */
-#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
-
-#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */
-#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
-
-#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */
-#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
-
-#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */
-#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
-
-#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */
-#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
-
-#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */
-#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
-
-#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */
-#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */
-
-/* ITM Integration Write Register Definitions */
-#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */
-#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */
-
-/* ITM Integration Read Register Definitions */
-#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */
-#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */
-
-/* ITM Integration Mode Control Register Definitions */
-#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */
-#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */
-
-/* ITM Lock Status Register Definitions */
-#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */
-#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
-
-#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */
-#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
-
-#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */
-#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */
-
-/*@}*/ /* end of group CMSIS_ITM */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
- \brief Type definitions for the Data Watchpoint and Trace (DWT)
- @{
- */
-
-/**
- \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
- */
-typedef struct
-{
- __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
- __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
- __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
- __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
- __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
- __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
- __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
- __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
- __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
- __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
- __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
- uint32_t RESERVED0[1U];
- __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
- __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
- __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
- uint32_t RESERVED1[1U];
- __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
- __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
- __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
- uint32_t RESERVED2[1U];
- __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
- __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
- __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
- uint32_t RESERVED3[981U];
- __OM uint32_t LAR; /*!< Offset: 0xFB0 ( W) Lock Access Register */
- __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */
-} DWT_Type;
-
-/* DWT Control Register Definitions */
-#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */
-#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
-
-#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */
-#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
-
-#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */
-#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
-
-#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */
-#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
-
-#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */
-#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
-
-#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */
-#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
-
-#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */
-#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
-
-#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */
-#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
-
-#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */
-#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
-
-#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */
-#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
-
-#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */
-#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
-
-#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */
-#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
-
-#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */
-#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
-
-#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */
-#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
-
-#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */
-#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
-
-#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */
-#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
-
-#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */
-#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
-
-#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */
-#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */
-
-/* DWT CPI Count Register Definitions */
-#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */
-#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */
-
-/* DWT Exception Overhead Count Register Definitions */
-#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */
-#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */
-
-/* DWT Sleep Count Register Definitions */
-#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */
-#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
-
-/* DWT LSU Count Register Definitions */
-#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */
-#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */
-
-/* DWT Folded-instruction Count Register Definitions */
-#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */
-#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */
-
-/* DWT Comparator Mask Register Definitions */
-#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */
-#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */
-
-/* DWT Comparator Function Register Definitions */
-#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */
-#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
-
-#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */
-#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
-
-#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */
-#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
-
-#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */
-#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
-
-#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */
-#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
-
-#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */
-#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
-
-#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */
-#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
-
-#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */
-#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
-
-#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */
-#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */
-
-/*@}*/ /* end of group CMSIS_DWT */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_TPI Trace Port Interface (TPI)
- \brief Type definitions for the Trace Port Interface (TPI)
- @{
- */
-
-/**
- \brief Structure type to access the Trace Port Interface Register (TPI).
- */
-typedef struct
-{
- __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
- __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
- uint32_t RESERVED0[2U];
- __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
- uint32_t RESERVED1[55U];
- __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
- uint32_t RESERVED2[131U];
- __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
- __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
- __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
- uint32_t RESERVED3[759U];
- __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
- __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
- __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
- uint32_t RESERVED4[1U];
- __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
- __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
- __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
- uint32_t RESERVED5[39U];
- __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
- __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
- uint32_t RESERVED7[8U];
- __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
- __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
-} TPI_Type;
-
-/* TPI Asynchronous Clock Prescaler Register Definitions */
-#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */
-#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */
-
-/* TPI Selected Pin Protocol Register Definitions */
-#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */
-#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */
-
-/* TPI Formatter and Flush Status Register Definitions */
-#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */
-#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
-
-#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */
-#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
-
-#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */
-#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
-
-#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */
-#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */
-
-/* TPI Formatter and Flush Control Register Definitions */
-#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */
-#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
-
-#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */
-#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
-
-/* TPI TRIGGER Register Definitions */
-#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */
-#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */
-
-/* TPI Integration ETM Data Register Definitions (FIFO0) */
-#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */
-#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
-
-#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */
-#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
-
-#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */
-#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
-
-#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */
-#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
-
-#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */
-#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
-
-#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */
-#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
-
-#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */
-#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */
-
-/* TPI ITATBCTR2 Register Definitions */
-#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */
-#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */
-
-/* TPI Integration ITM Data Register Definitions (FIFO1) */
-#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */
-#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
-
-#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */
-#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
-
-#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */
-#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
-
-#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */
-#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
-
-#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */
-#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
-
-#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */
-#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
-
-#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */
-#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */
-
-/* TPI ITATBCTR0 Register Definitions */
-#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */
-#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */
-
-/* TPI Integration Mode Control Register Definitions */
-#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */
-#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */
-
-/* TPI DEVID Register Definitions */
-#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */
-#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
-
-#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */
-#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
-
-#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */
-#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
-
-#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */
-#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
-
-#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */
-#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
-
-#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */
-#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */
-
-/* TPI DEVTYPE Register Definitions */
-#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */
-#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
-
-#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */
-#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */
-
-/*@}*/ /* end of group CMSIS_TPI */
-
-
-#if (__MPU_PRESENT == 1U)
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_MPU Memory Protection Unit (MPU)
- \brief Type definitions for the Memory Protection Unit (MPU)
- @{
- */
-
-/**
- \brief Structure type to access the Memory Protection Unit (MPU).
- */
-typedef struct
-{
- __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
- __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
- __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
- __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
- __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
- __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
- __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
- __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
- __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
- __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
- __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
-} MPU_Type;
-
-/* MPU Type Register Definitions */
-#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
-#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
-
-#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
-#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
-
-#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
-#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
-
-/* MPU Control Register Definitions */
-#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
-#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
-
-#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
-#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
-
-#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
-#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
-
-/* MPU Region Number Register Definitions */
-#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
-#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
-
-/* MPU Region Base Address Register Definitions */
-#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */
-#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
-
-#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
-#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
-
-#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
-#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
-
-/* MPU Region Attribute and Size Register Definitions */
-#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
-#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
-
-#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
-#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
-
-#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
-#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
-
-#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
-#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
-
-#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
-#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
-
-#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
-#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
-
-#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
-#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
-
-#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
-#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
-
-#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
-#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
-
-#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
-#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
-
-/*@} end of group CMSIS_MPU */
-#endif
-
-
-#if (__FPU_PRESENT == 1U)
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_FPU Floating Point Unit (FPU)
- \brief Type definitions for the Floating Point Unit (FPU)
- @{
- */
-
-/**
- \brief Structure type to access the Floating Point Unit (FPU).
- */
-typedef struct
-{
- uint32_t RESERVED0[1U];
- __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
- __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
- __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
- __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
- __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
- __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */
-} FPU_Type;
-
-/* Floating-Point Context Control Register Definitions */
-#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */
-#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
-
-#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */
-#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
-
-#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */
-#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
-
-#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */
-#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
-
-#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */
-#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
-
-#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */
-#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
-
-#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */
-#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
-
-#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */
-#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
-
-#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */
-#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */
-
-/* Floating-Point Context Address Register Definitions */
-#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */
-#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
-
-/* Floating-Point Default Status Control Register Definitions */
-#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */
-#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
-
-#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */
-#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
-
-#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */
-#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
-
-#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */
-#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
-
-/* Media and FP Feature Register 0 Definitions */
-#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */
-#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
-
-#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */
-#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
-
-#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */
-#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
-
-#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */
-#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
-
-#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */
-#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
-
-#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */
-#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
-
-#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */
-#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
-
-#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */
-#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */
-
-/* Media and FP Feature Register 1 Definitions */
-#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */
-#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
-
-#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */
-#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
-
-#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */
-#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
-
-#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */
-#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */
-
-/* Media and FP Feature Register 2 Definitions */
-
-/*@} end of group CMSIS_FPU */
-#endif
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
- \brief Type definitions for the Core Debug Registers
- @{
- */
-
-/**
- \brief Structure type to access the Core Debug Register (CoreDebug).
- */
-typedef struct
-{
- __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
- __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
- __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
- __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
-} CoreDebug_Type;
-
-/* Debug Halting Control and Status Register Definitions */
-#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */
-#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
-
-#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */
-#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
-
-#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
-#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
-
-#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */
-#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
-
-#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */
-#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
-
-#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */
-#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
-
-#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */
-#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
-
-#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
-#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
-
-#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */
-#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
-
-#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */
-#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
-
-#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */
-#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
-
-#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */
-#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
-
-/* Debug Core Register Selector Register Definitions */
-#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */
-#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
-
-#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */
-#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */
-
-/* Debug Exception and Monitor Control Register Definitions */
-#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */
-#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
-
-#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */
-#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
-
-#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */
-#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
-
-#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */
-#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
-
-#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */
-#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
-
-#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */
-#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
-
-#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */
-#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
-
-#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */
-#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
-
-#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */
-#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
-
-#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */
-#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
-
-#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */
-#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
-
-#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */
-#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
-
-#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */
-#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
-
-/*@} end of group CMSIS_CoreDebug */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_core_bitfield Core register bit field macros
- \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
- @{
- */
-
-/**
- \brief Mask and shift a bit field value for use in a register bit range.
- \param[in] field Name of the register bit field.
- \param[in] value Value of the bit field.
- \return Masked and shifted value.
-*/
-#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
-
-/**
- \brief Mask and shift a register value to extract a bit filed value.
- \param[in] field Name of the register bit field.
- \param[in] value Value of register.
- \return Masked and shifted bit field value.
-*/
-#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
-
-/*@} end of group CMSIS_core_bitfield */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_core_base Core Definitions
- \brief Definitions for base addresses, unions, and structures.
- @{
- */
-
-/* Memory mapping of Cortex-M4 Hardware */
-#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
-#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
-#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
-#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
-#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
-#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
-#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
-#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
-
-#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
-#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
-#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
-#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
-#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
-#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
-#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
-#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
-
-#if (__MPU_PRESENT == 1U)
- #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
- #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
-#endif
-
-#if (__FPU_PRESENT == 1U)
- #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
- #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
-#endif
-
-/*@} */
-
-
-
-/*******************************************************************************
- * Hardware Abstraction Layer
- Core Function Interface contains:
- - Core NVIC Functions
- - Core SysTick Functions
- - Core Debug Functions
- - Core Register Access Functions
- ******************************************************************************/
-/**
- \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
-*/
-
-
-
-/* ########################## NVIC functions #################################### */
-/**
- \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_NVICFunctions NVIC Functions
- \brief Functions that manage interrupts and exceptions via the NVIC.
- @{
- */
-
-/**
- \brief Set Priority Grouping
- \details Sets the priority grouping field using the required unlock sequence.
- The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
- Only values from 0..7 are used.
- In case of a conflict between priority grouping and available
- priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
- \param [in] PriorityGroup Priority grouping field.
- */
-__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
-{
- uint32_t reg_value;
- uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
-
- reg_value = SCB->AIRCR; /* read old register configuration */
- reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */
- reg_value = (reg_value |
- ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
- (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */
- SCB->AIRCR = reg_value;
-}
-
-
-/**
- \brief Get Priority Grouping
- \details Reads the priority grouping field from the NVIC Interrupt Controller.
- \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
- */
-__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
-{
- return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
-}
-
-
-/**
- \brief Enable External Interrupt
- \details Enables a device-specific interrupt in the NVIC interrupt controller.
- \param [in] IRQn External interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
-{
- NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Disable External Interrupt
- \details Disables a device-specific interrupt in the NVIC interrupt controller.
- \param [in] IRQn External interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
-{
- NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Get Pending Interrupt
- \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
- \param [in] IRQn Interrupt number.
- \return 0 Interrupt status is not pending.
- \return 1 Interrupt status is pending.
- */
-__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
-{
- return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
-}
-
-
-/**
- \brief Set Pending Interrupt
- \details Sets the pending bit of an external interrupt.
- \param [in] IRQn Interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
-{
- NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Clear Pending Interrupt
- \details Clears the pending bit of an external interrupt.
- \param [in] IRQn External interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
-{
- NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Get Active Interrupt
- \details Reads the active register in NVIC and returns the active bit.
- \param [in] IRQn Interrupt number.
- \return 0 Interrupt status is not active.
- \return 1 Interrupt status is active.
- */
-__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
-{
- return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
-}
-
-
-/**
- \brief Set Interrupt Priority
- \details Sets the priority of an interrupt.
- \note The priority cannot be set for every core interrupt.
- \param [in] IRQn Interrupt number.
- \param [in] priority Priority to set.
- */
-__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
-{
- if ((int32_t)(IRQn) < 0)
- {
- SCB->SHPR[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
- }
- else
- {
- NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
- }
-}
-
-
-/**
- \brief Get Interrupt Priority
- \details Reads the priority of an interrupt.
- The interrupt number can be positive to specify an external (device specific) interrupt,
- or negative to specify an internal (core) interrupt.
- \param [in] IRQn Interrupt number.
- \return Interrupt Priority.
- Value is aligned automatically to the implemented priority bits of the microcontroller.
- */
-__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
-{
-
- if ((int32_t)(IRQn) < 0)
- {
- return(((uint32_t)SCB->SHPR[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
- }
- else
- {
- return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS)));
- }
-}
-
-
-/**
- \brief Encode Priority
- \details Encodes the priority for an interrupt with the given priority group,
- preemptive priority value, and subpriority value.
- In case of a conflict between priority grouping and available
- priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
- \param [in] PriorityGroup Used priority group.
- \param [in] PreemptPriority Preemptive priority value (starting from 0).
- \param [in] SubPriority Subpriority value (starting from 0).
- \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
- */
-__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
-{
- uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
- uint32_t PreemptPriorityBits;
- uint32_t SubPriorityBits;
-
- PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
- SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
-
- return (
- ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
- ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
- );
-}
-
-
-/**
- \brief Decode Priority
- \details Decodes an interrupt priority value with a given priority group to
- preemptive priority value and subpriority value.
- In case of a conflict between priority grouping and available
- priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
- \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
- \param [in] PriorityGroup Used priority group.
- \param [out] pPreemptPriority Preemptive priority value (starting from 0).
- \param [out] pSubPriority Subpriority value (starting from 0).
- */
-__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
-{
- uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
- uint32_t PreemptPriorityBits;
- uint32_t SubPriorityBits;
-
- PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
- SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
-
- *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
- *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
-}
-
-
-/**
- \brief System Reset
- \details Initiates a system reset request to reset the MCU.
- */
-__STATIC_INLINE void NVIC_SystemReset(void)
-{
- __DSB(); /* Ensure all outstanding memory accesses included
- buffered write are completed before reset */
- SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
- (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
- SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */
- __DSB(); /* Ensure completion of memory access */
-
- for(;;) /* wait until reset */
- {
- __NOP();
- }
-}
-
-/*@} end of CMSIS_Core_NVICFunctions */
-
-
-/* ########################## FPU functions #################################### */
-/**
- \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_FpuFunctions FPU Functions
- \brief Function that provides FPU type.
- @{
- */
-
-/**
- \brief get FPU type
- \details returns the FPU type
- \returns
- - \b 0: No FPU
- - \b 1: Single precision FPU
- - \b 2: Double + Single precision FPU
- */
-__STATIC_INLINE uint32_t SCB_GetFPUType(void)
-{
- uint32_t mvfr0;
-
- mvfr0 = SCB->MVFR0;
- if ((mvfr0 & 0x00000FF0UL) == 0x220UL)
- {
- return 2UL; /* Double + Single precision FPU */
- }
- else if ((mvfr0 & 0x00000FF0UL) == 0x020UL)
- {
- return 1UL; /* Single precision FPU */
- }
- else
- {
- return 0UL; /* No FPU */
- }
-}
-
-
-/*@} end of CMSIS_Core_FpuFunctions */
-
-
-
-/* ########################## Cache functions #################################### */
-/**
- \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_CacheFunctions Cache Functions
- \brief Functions that configure Instruction and Data cache.
- @{
- */
-
-/* Cache Size ID Register Macros */
-#define CCSIDR_WAYS(x) (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos)
-#define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos )
-
-
-/**
- \brief Enable I-Cache
- \details Turns on I-Cache
- */
-__STATIC_INLINE void SCB_EnableICache (void)
-{
- #if (__ICACHE_PRESENT == 1U)
- __DSB();
- __ISB();
- SCB->ICIALLU = 0UL; /* invalidate I-Cache */
- SCB->CCR |= (uint32_t)SCB_CCR_IC_Msk; /* enable I-Cache */
- __DSB();
- __ISB();
- #endif
-}
-
-
-/**
- \brief Disable I-Cache
- \details Turns off I-Cache
- */
-__STATIC_INLINE void SCB_DisableICache (void)
-{
- #if (__ICACHE_PRESENT == 1U)
- __DSB();
- __ISB();
- SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk; /* disable I-Cache */
- SCB->ICIALLU = 0UL; /* invalidate I-Cache */
- __DSB();
- __ISB();
- #endif
-}
-
-
-/**
- \brief Invalidate I-Cache
- \details Invalidates I-Cache
- */
-__STATIC_INLINE void SCB_InvalidateICache (void)
-{
- #if (__ICACHE_PRESENT == 1U)
- __DSB();
- __ISB();
- SCB->ICIALLU = 0UL;
- __DSB();
- __ISB();
- #endif
-}
-
-
-/**
- \brief Enable D-Cache
- \details Turns on D-Cache
- */
-__STATIC_INLINE void SCB_EnableDCache (void)
-{
- #if (__DCACHE_PRESENT == 1U)
- uint32_t ccsidr;
- uint32_t sets;
- uint32_t ways;
-
- SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */
- __DSB();
-
- ccsidr = SCB->CCSIDR;
-
- /* invalidate D-Cache */
- sets = (uint32_t)(CCSIDR_SETS(ccsidr));
- do {
- ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
- do {
- SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) |
- ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) );
- #if defined ( __CC_ARM )
- __schedule_barrier();
- #endif
- } while (ways--);
- } while(sets--);
- __DSB();
-
- SCB->CCR |= (uint32_t)SCB_CCR_DC_Msk; /* enable D-Cache */
-
- __DSB();
- __ISB();
- #endif
-}
-
-
-/**
- \brief Disable D-Cache
- \details Turns off D-Cache
- */
-__STATIC_INLINE void SCB_DisableDCache (void)
-{
- #if (__DCACHE_PRESENT == 1U)
- uint32_t ccsidr;
- uint32_t sets;
- uint32_t ways;
-
- SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */
- __DSB();
-
- ccsidr = SCB->CCSIDR;
-
- SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk; /* disable D-Cache */
-
- /* clean & invalidate D-Cache */
- sets = (uint32_t)(CCSIDR_SETS(ccsidr));
- do {
- ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
- do {
- SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) |
- ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) );
- #if defined ( __CC_ARM )
- __schedule_barrier();
- #endif
- } while (ways--);
- } while(sets--);
-
- __DSB();
- __ISB();
- #endif
-}
-
-
-/**
- \brief Invalidate D-Cache
- \details Invalidates D-Cache
- */
-__STATIC_INLINE void SCB_InvalidateDCache (void)
-{
- #if (__DCACHE_PRESENT == 1U)
- uint32_t ccsidr;
- uint32_t sets;
- uint32_t ways;
-
- SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */
- __DSB();
-
- ccsidr = SCB->CCSIDR;
-
- /* invalidate D-Cache */
- sets = (uint32_t)(CCSIDR_SETS(ccsidr));
- do {
- ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
- do {
- SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) |
- ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) );
- #if defined ( __CC_ARM )
- __schedule_barrier();
- #endif
- } while (ways--);
- } while(sets--);
-
- __DSB();
- __ISB();
- #endif
-}
-
-
-/**
- \brief Clean D-Cache
- \details Cleans D-Cache
- */
-__STATIC_INLINE void SCB_CleanDCache (void)
-{
- #if (__DCACHE_PRESENT == 1U)
- uint32_t ccsidr;
- uint32_t sets;
- uint32_t ways;
-
- SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */
- __DSB();
-
- ccsidr = SCB->CCSIDR;
-
- /* clean D-Cache */
- sets = (uint32_t)(CCSIDR_SETS(ccsidr));
- do {
- ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
- do {
- SCB->DCCSW = (((sets << SCB_DCCSW_SET_Pos) & SCB_DCCSW_SET_Msk) |
- ((ways << SCB_DCCSW_WAY_Pos) & SCB_DCCSW_WAY_Msk) );
- #if defined ( __CC_ARM )
- __schedule_barrier();
- #endif
- } while (ways--);
- } while(sets--);
-
- __DSB();
- __ISB();
- #endif
-}
-
-
-/**
- \brief Clean & Invalidate D-Cache
- \details Cleans and Invalidates D-Cache
- */
-__STATIC_INLINE void SCB_CleanInvalidateDCache (void)
-{
- #if (__DCACHE_PRESENT == 1U)
- uint32_t ccsidr;
- uint32_t sets;
- uint32_t ways;
-
- SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */
- __DSB();
-
- ccsidr = SCB->CCSIDR;
-
- /* clean & invalidate D-Cache */
- sets = (uint32_t)(CCSIDR_SETS(ccsidr));
- do {
- ways = (uint32_t)(CCSIDR_WAYS(ccsidr));
- do {
- SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) |
- ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) );
- #if defined ( __CC_ARM )
- __schedule_barrier();
- #endif
- } while (ways--);
- } while(sets--);
-
- __DSB();
- __ISB();
- #endif
-}
-
-
-/**
- \brief D-Cache Invalidate by address
- \details Invalidates D-Cache for the given address
- \param[in] addr address (aligned to 32-byte boundary)
- \param[in] dsize size of memory block (in number of bytes)
-*/
-__STATIC_INLINE void SCB_InvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize)
-{
- #if (__DCACHE_PRESENT == 1U)
- int32_t op_size = dsize;
- uint32_t op_addr = (uint32_t)addr;
- int32_t linesize = 32U; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */
-
- __DSB();
-
- while (op_size > 0) {
- SCB->DCIMVAC = op_addr;
- op_addr += linesize;
- op_size -= linesize;
- }
-
- __DSB();
- __ISB();
- #endif
-}
-
-
-/**
- \brief D-Cache Clean by address
- \details Cleans D-Cache for the given address
- \param[in] addr address (aligned to 32-byte boundary)
- \param[in] dsize size of memory block (in number of bytes)
-*/
-__STATIC_INLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize)
-{
- #if (__DCACHE_PRESENT == 1)
- int32_t op_size = dsize;
- uint32_t op_addr = (uint32_t) addr;
- int32_t linesize = 32U; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */
-
- __DSB();
-
- while (op_size > 0) {
- SCB->DCCMVAC = op_addr;
- op_addr += linesize;
- op_size -= linesize;
- }
-
- __DSB();
- __ISB();
- #endif
-}
-
-
-/**
- \brief D-Cache Clean and Invalidate by address
- \details Cleans and invalidates D_Cache for the given address
- \param[in] addr address (aligned to 32-byte boundary)
- \param[in] dsize size of memory block (in number of bytes)
-*/
-__STATIC_INLINE void SCB_CleanInvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize)
-{
- #if (__DCACHE_PRESENT == 1U)
- int32_t op_size = dsize;
- uint32_t op_addr = (uint32_t) addr;
- int32_t linesize = 32U; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */
-
- __DSB();
-
- while (op_size > 0) {
- SCB->DCCIMVAC = op_addr;
- op_addr += linesize;
- op_size -= linesize;
- }
-
- __DSB();
- __ISB();
- #endif
-}
-
-
-/*@} end of CMSIS_Core_CacheFunctions */
-
-
-
-/* ################################## SysTick function ############################################ */
-/**
- \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
- \brief Functions that configure the System.
- @{
- */
-
-#if (__Vendor_SysTickConfig == 0U)
-
-/**
- \brief System Tick Configuration
- \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
- Counter is in free running mode to generate periodic interrupts.
- \param [in] ticks Number of ticks between two interrupts.
- \return 0 Function succeeded.
- \return 1 Function failed.
- \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
- function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
- must contain a vendor-specific implementation of this function.
- */
-__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
-{
- if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
- {
- return (1UL); /* Reload value impossible */
- }
-
- SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
- NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
- SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
- SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
- SysTick_CTRL_TICKINT_Msk |
- SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
- return (0UL); /* Function successful */
-}
-
-#endif
-
-/*@} end of CMSIS_Core_SysTickFunctions */
-
-
-
-/* ##################################### Debug In/Output function ########################################### */
-/**
- \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_core_DebugFunctions ITM Functions
- \brief Functions that access the ITM debug interface.
- @{
- */
-
-extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
-#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
-
-
-/**
- \brief ITM Send Character
- \details Transmits a character via the ITM channel 0, and
- \li Just returns when no debugger is connected that has booked the output.
- \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
- \param [in] ch Character to transmit.
- \returns Character to transmit.
- */
-__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
-{
- if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */
- ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */
- {
- while (ITM->PORT[0U].u32 == 0UL)
- {
- __NOP();
- }
- ITM->PORT[0U].u8 = (uint8_t)ch;
- }
- return (ch);
-}
-
-
-/**
- \brief ITM Receive Character
- \details Inputs a character via the external variable \ref ITM_RxBuffer.
- \return Received character.
- \return -1 No character pending.
- */
-__STATIC_INLINE int32_t ITM_ReceiveChar (void)
-{
- int32_t ch = -1; /* no character available */
-
- if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
- {
- ch = ITM_RxBuffer;
- ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
- }
-
- return (ch);
-}
-
-
-/**
- \brief ITM Check Character
- \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
- \return 0 No character available.
- \return 1 Character available.
- */
-__STATIC_INLINE int32_t ITM_CheckChar (void)
-{
-
- if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
- {
- return (0); /* no character available */
- }
- else
- {
- return (1); /* character available */
- }
-}
-
-/*@} end of CMSIS_core_DebugFunctions */
-
-
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __CORE_CM7_H_DEPENDANT */
-
-#endif /* __CMSIS_GENERIC */
diff --git a/stm32cubemx/Drivers/CMSIS/Include/core_cmFunc.h b/stm32cubemx/Drivers/CMSIS/Include/core_cmFunc.h
deleted file mode 100644
index 652a48a..0000000
--- a/stm32cubemx/Drivers/CMSIS/Include/core_cmFunc.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/**************************************************************************//**
- * @file core_cmFunc.h
- * @brief CMSIS Cortex-M Core Function Access Header File
- * @version V4.30
- * @date 20. October 2015
- ******************************************************************************/
-/* Copyright (c) 2009 - 2015 ARM LIMITED
-
- All rights reserved.
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- - Neither the name of ARM nor the names of its contributors may be used
- to endorse or promote products derived from this software without
- specific prior written permission.
- *
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- POSSIBILITY OF SUCH DAMAGE.
- ---------------------------------------------------------------------------*/
-
-
-#if defined ( __ICCARM__ )
- #pragma system_include /* treat file as system include file for MISRA check */
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #pragma clang system_header /* treat file as system include file */
-#endif
-
-#ifndef __CORE_CMFUNC_H
-#define __CORE_CMFUNC_H
-
-
-/* ########################### Core Function Access ########################### */
-/** \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
- @{
-*/
-
-/*------------------ RealView Compiler -----------------*/
-#if defined ( __CC_ARM )
- #include "cmsis_armcc.h"
-
-/*------------------ ARM Compiler V6 -------------------*/
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #include "cmsis_armcc_V6.h"
-
-/*------------------ GNU Compiler ----------------------*/
-#elif defined ( __GNUC__ )
- #include "cmsis_gcc.h"
-
-/*------------------ ICC Compiler ----------------------*/
-#elif defined ( __ICCARM__ )
- #include <cmsis_iar.h>
-
-/*------------------ TI CCS Compiler -------------------*/
-#elif defined ( __TMS470__ )
- #include <cmsis_ccs.h>
-
-/*------------------ TASKING Compiler ------------------*/
-#elif defined ( __TASKING__ )
- /*
- * The CMSIS functions have been implemented as intrinsics in the compiler.
- * Please use "carm -?i" to get an up to date list of all intrinsics,
- * Including the CMSIS ones.
- */
-
-/*------------------ COSMIC Compiler -------------------*/
-#elif defined ( __CSMC__ )
- #include <cmsis_csm.h>
-
-#endif
-
-/*@} end of CMSIS_Core_RegAccFunctions */
-
-#endif /* __CORE_CMFUNC_H */
diff --git a/stm32cubemx/Drivers/CMSIS/Include/core_cmInstr.h b/stm32cubemx/Drivers/CMSIS/Include/core_cmInstr.h
deleted file mode 100644
index f474b0e..0000000
--- a/stm32cubemx/Drivers/CMSIS/Include/core_cmInstr.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/**************************************************************************//**
- * @file core_cmInstr.h
- * @brief CMSIS Cortex-M Core Instruction Access Header File
- * @version V4.30
- * @date 20. October 2015
- ******************************************************************************/
-/* Copyright (c) 2009 - 2015 ARM LIMITED
-
- All rights reserved.
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- - Neither the name of ARM nor the names of its contributors may be used
- to endorse or promote products derived from this software without
- specific prior written permission.
- *
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- POSSIBILITY OF SUCH DAMAGE.
- ---------------------------------------------------------------------------*/
-
-
-#if defined ( __ICCARM__ )
- #pragma system_include /* treat file as system include file for MISRA check */
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #pragma clang system_header /* treat file as system include file */
-#endif
-
-#ifndef __CORE_CMINSTR_H
-#define __CORE_CMINSTR_H
-
-
-/* ########################## Core Instruction Access ######################### */
-/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
- Access to dedicated instructions
- @{
-*/
-
-/*------------------ RealView Compiler -----------------*/
-#if defined ( __CC_ARM )
- #include "cmsis_armcc.h"
-
-/*------------------ ARM Compiler V6 -------------------*/
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #include "cmsis_armcc_V6.h"
-
-/*------------------ GNU Compiler ----------------------*/
-#elif defined ( __GNUC__ )
- #include "cmsis_gcc.h"
-
-/*------------------ ICC Compiler ----------------------*/
-#elif defined ( __ICCARM__ )
- #include <cmsis_iar.h>
-
-/*------------------ TI CCS Compiler -------------------*/
-#elif defined ( __TMS470__ )
- #include <cmsis_ccs.h>
-
-/*------------------ TASKING Compiler ------------------*/
-#elif defined ( __TASKING__ )
- /*
- * The CMSIS functions have been implemented as intrinsics in the compiler.
- * Please use "carm -?i" to get an up to date list of all intrinsics,
- * Including the CMSIS ones.
- */
-
-/*------------------ COSMIC Compiler -------------------*/
-#elif defined ( __CSMC__ )
- #include <cmsis_csm.h>
-
-#endif
-
-/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
-
-#endif /* __CORE_CMINSTR_H */
diff --git a/stm32cubemx/Drivers/CMSIS/Include/core_cmSimd.h b/stm32cubemx/Drivers/CMSIS/Include/core_cmSimd.h
deleted file mode 100644
index 66bf5c2..0000000
--- a/stm32cubemx/Drivers/CMSIS/Include/core_cmSimd.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/**************************************************************************//**
- * @file core_cmSimd.h
- * @brief CMSIS Cortex-M SIMD Header File
- * @version V4.30
- * @date 20. October 2015
- ******************************************************************************/
-/* Copyright (c) 2009 - 2015 ARM LIMITED
-
- All rights reserved.
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- - Neither the name of ARM nor the names of its contributors may be used
- to endorse or promote products derived from this software without
- specific prior written permission.
- *
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- POSSIBILITY OF SUCH DAMAGE.
- ---------------------------------------------------------------------------*/
-
-
-#if defined ( __ICCARM__ )
- #pragma system_include /* treat file as system include file for MISRA check */
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #pragma clang system_header /* treat file as system include file */
-#endif
-
-#ifndef __CORE_CMSIMD_H
-#define __CORE_CMSIMD_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-
-/* ################### Compiler specific Intrinsics ########################### */
-/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
- Access to dedicated SIMD instructions
- @{
-*/
-
-/*------------------ RealView Compiler -----------------*/
-#if defined ( __CC_ARM )
- #include "cmsis_armcc.h"
-
-/*------------------ ARM Compiler V6 -------------------*/
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #include "cmsis_armcc_V6.h"
-
-/*------------------ GNU Compiler ----------------------*/
-#elif defined ( __GNUC__ )
- #include "cmsis_gcc.h"
-
-/*------------------ ICC Compiler ----------------------*/
-#elif defined ( __ICCARM__ )
- #include <cmsis_iar.h>
-
-/*------------------ TI CCS Compiler -------------------*/
-#elif defined ( __TMS470__ )
- #include <cmsis_ccs.h>
-
-/*------------------ TASKING Compiler ------------------*/
-#elif defined ( __TASKING__ )
- /*
- * The CMSIS functions have been implemented as intrinsics in the compiler.
- * Please use "carm -?i" to get an up to date list of all intrinsics,
- * Including the CMSIS ones.
- */
-
-/*------------------ COSMIC Compiler -------------------*/
-#elif defined ( __CSMC__ )
- #include <cmsis_csm.h>
-
-#endif
-
-/*@} end of group CMSIS_SIMD_intrinsics */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __CORE_CMSIMD_H */
diff --git a/stm32cubemx/Drivers/CMSIS/Include/core_sc000.h b/stm32cubemx/Drivers/CMSIS/Include/core_sc000.h
deleted file mode 100644
index 514dbd8..0000000
--- a/stm32cubemx/Drivers/CMSIS/Include/core_sc000.h
+++ /dev/null
@@ -1,926 +0,0 @@
-/**************************************************************************//**
- * @file core_sc000.h
- * @brief CMSIS SC000 Core Peripheral Access Layer Header File
- * @version V4.30
- * @date 20. October 2015
- ******************************************************************************/
-/* Copyright (c) 2009 - 2015 ARM LIMITED
-
- All rights reserved.
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- - Neither the name of ARM nor the names of its contributors may be used
- to endorse or promote products derived from this software without
- specific prior written permission.
- *
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- POSSIBILITY OF SUCH DAMAGE.
- ---------------------------------------------------------------------------*/
-
-
-#if defined ( __ICCARM__ )
- #pragma system_include /* treat file as system include file for MISRA check */
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #pragma clang system_header /* treat file as system include file */
-#endif
-
-#ifndef __CORE_SC000_H_GENERIC
-#define __CORE_SC000_H_GENERIC
-
-#include <stdint.h>
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/**
- \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
- CMSIS violates the following MISRA-C:2004 rules:
-
- \li Required Rule 8.5, object/function definition in header file.<br>
- Function definitions in header files are used to allow 'inlining'.
-
- \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
- Unions are used for effective representation of core registers.
-
- \li Advisory Rule 19.7, Function-like macro defined.<br>
- Function-like macros are used to allow more efficient code.
- */
-
-
-/*******************************************************************************
- * CMSIS definitions
- ******************************************************************************/
-/**
- \ingroup SC000
- @{
- */
-
-/* CMSIS SC000 definitions */
-#define __SC000_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
-#define __SC000_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
-#define __SC000_CMSIS_VERSION ((__SC000_CMSIS_VERSION_MAIN << 16U) | \
- __SC000_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
-
-#define __CORTEX_SC (000U) /*!< Cortex secure core */
-
-
-#if defined ( __CC_ARM )
- #define __ASM __asm /*!< asm keyword for ARM Compiler */
- #define __INLINE __inline /*!< inline keyword for ARM Compiler */
- #define __STATIC_INLINE static __inline
-
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #define __ASM __asm /*!< asm keyword for ARM Compiler */
- #define __INLINE __inline /*!< inline keyword for ARM Compiler */
- #define __STATIC_INLINE static __inline
-
-#elif defined ( __GNUC__ )
- #define __ASM __asm /*!< asm keyword for GNU Compiler */
- #define __INLINE inline /*!< inline keyword for GNU Compiler */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __ICCARM__ )
- #define __ASM __asm /*!< asm keyword for IAR Compiler */
- #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __TMS470__ )
- #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __TASKING__ )
- #define __ASM __asm /*!< asm keyword for TASKING Compiler */
- #define __INLINE inline /*!< inline keyword for TASKING Compiler */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __CSMC__ )
- #define __packed
- #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
- #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
- #define __STATIC_INLINE static inline
-
-#else
- #error Unknown compiler
-#endif
-
-/** __FPU_USED indicates whether an FPU is used or not.
- This core does not support an FPU at all
-*/
-#define __FPU_USED 0U
-
-#if defined ( __CC_ARM )
- #if defined __TARGET_FPU_VFP
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #if defined __ARM_PCS_VFP
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __GNUC__ )
- #if defined (__VFP_FP__) && !defined(__SOFTFP__)
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __ICCARM__ )
- #if defined __ARMVFP__
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __TMS470__ )
- #if defined __TI_VFP_SUPPORT__
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __TASKING__ )
- #if defined __FPU_VFP__
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __CSMC__ )
- #if ( __CSMC__ & 0x400U)
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#endif
-
-#include "core_cmInstr.h" /* Core Instruction Access */
-#include "core_cmFunc.h" /* Core Function Access */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __CORE_SC000_H_GENERIC */
-
-#ifndef __CMSIS_GENERIC
-
-#ifndef __CORE_SC000_H_DEPENDANT
-#define __CORE_SC000_H_DEPENDANT
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* check device defines and use defaults */
-#if defined __CHECK_DEVICE_DEFINES
- #ifndef __SC000_REV
- #define __SC000_REV 0x0000U
- #warning "__SC000_REV not defined in device header file; using default!"
- #endif
-
- #ifndef __MPU_PRESENT
- #define __MPU_PRESENT 0U
- #warning "__MPU_PRESENT not defined in device header file; using default!"
- #endif
-
- #ifndef __NVIC_PRIO_BITS
- #define __NVIC_PRIO_BITS 2U
- #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
- #endif
-
- #ifndef __Vendor_SysTickConfig
- #define __Vendor_SysTickConfig 0U
- #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
- #endif
-#endif
-
-/* IO definitions (access restrictions to peripheral registers) */
-/**
- \defgroup CMSIS_glob_defs CMSIS Global Defines
-
- <strong>IO Type Qualifiers</strong> are used
- \li to specify the access to peripheral variables.
- \li for automatic generation of peripheral register debug information.
-*/
-#ifdef __cplusplus
- #define __I volatile /*!< Defines 'read only' permissions */
-#else
- #define __I volatile const /*!< Defines 'read only' permissions */
-#endif
-#define __O volatile /*!< Defines 'write only' permissions */
-#define __IO volatile /*!< Defines 'read / write' permissions */
-
-/* following defines should be used for structure members */
-#define __IM volatile const /*! Defines 'read only' structure member permissions */
-#define __OM volatile /*! Defines 'write only' structure member permissions */
-#define __IOM volatile /*! Defines 'read / write' structure member permissions */
-
-/*@} end of group SC000 */
-
-
-
-/*******************************************************************************
- * Register Abstraction
- Core Register contain:
- - Core Register
- - Core NVIC Register
- - Core SCB Register
- - Core SysTick Register
- - Core MPU Register
- ******************************************************************************/
-/**
- \defgroup CMSIS_core_register Defines and Type Definitions
- \brief Type definitions and defines for Cortex-M processor based devices.
-*/
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_CORE Status and Control Registers
- \brief Core Register type definitions.
- @{
- */
-
-/**
- \brief Union type to access the Application Program Status Register (APSR).
- */
-typedef union
-{
- struct
- {
- uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
- uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
- uint32_t C:1; /*!< bit: 29 Carry condition code flag */
- uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
- uint32_t N:1; /*!< bit: 31 Negative condition code flag */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} APSR_Type;
-
-/* APSR Register Definitions */
-#define APSR_N_Pos 31U /*!< APSR: N Position */
-#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
-
-#define APSR_Z_Pos 30U /*!< APSR: Z Position */
-#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
-
-#define APSR_C_Pos 29U /*!< APSR: C Position */
-#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
-
-#define APSR_V_Pos 28U /*!< APSR: V Position */
-#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
-
-
-/**
- \brief Union type to access the Interrupt Program Status Register (IPSR).
- */
-typedef union
-{
- struct
- {
- uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
- uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} IPSR_Type;
-
-/* IPSR Register Definitions */
-#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
-#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
-
-
-/**
- \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
- */
-typedef union
-{
- struct
- {
- uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
- uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
- uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
- uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
- uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
- uint32_t C:1; /*!< bit: 29 Carry condition code flag */
- uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
- uint32_t N:1; /*!< bit: 31 Negative condition code flag */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} xPSR_Type;
-
-/* xPSR Register Definitions */
-#define xPSR_N_Pos 31U /*!< xPSR: N Position */
-#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
-
-#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
-#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
-
-#define xPSR_C_Pos 29U /*!< xPSR: C Position */
-#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
-
-#define xPSR_V_Pos 28U /*!< xPSR: V Position */
-#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
-
-#define xPSR_T_Pos 24U /*!< xPSR: T Position */
-#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
-
-#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
-#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
-
-
-/**
- \brief Union type to access the Control Registers (CONTROL).
- */
-typedef union
-{
- struct
- {
- uint32_t _reserved0:1; /*!< bit: 0 Reserved */
- uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
- uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} CONTROL_Type;
-
-/* CONTROL Register Definitions */
-#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
-#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
-
-/*@} end of group CMSIS_CORE */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
- \brief Type definitions for the NVIC Registers
- @{
- */
-
-/**
- \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
- */
-typedef struct
-{
- __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
- uint32_t RESERVED0[31U];
- __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
- uint32_t RSERVED1[31U];
- __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
- uint32_t RESERVED2[31U];
- __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
- uint32_t RESERVED3[31U];
- uint32_t RESERVED4[64U];
- __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
-} NVIC_Type;
-
-/*@} end of group CMSIS_NVIC */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_SCB System Control Block (SCB)
- \brief Type definitions for the System Control Block Registers
- @{
- */
-
-/**
- \brief Structure type to access the System Control Block (SCB).
- */
-typedef struct
-{
- __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
- __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
- __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
- __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
- __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
- __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
- uint32_t RESERVED0[1U];
- __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
- __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
- uint32_t RESERVED1[154U];
- __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */
-} SCB_Type;
-
-/* SCB CPUID Register Definitions */
-#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
-#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
-
-#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
-#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
-
-#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
-#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
-
-#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
-#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
-
-#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
-#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
-
-/* SCB Interrupt Control State Register Definitions */
-#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
-#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
-
-#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
-#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
-
-#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
-#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
-
-#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
-#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
-
-#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
-#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
-
-#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
-#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
-
-#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
-#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
-
-#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
-#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
-
-#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
-#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
-
-/* SCB Interrupt Control State Register Definitions */
-#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
-#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
-
-/* SCB Application Interrupt and Reset Control Register Definitions */
-#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
-#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
-
-#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
-#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
-
-#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
-#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
-
-#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
-#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
-
-#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
-#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
-
-/* SCB System Control Register Definitions */
-#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
-#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
-
-#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
-#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
-
-#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
-#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
-
-/* SCB Configuration Control Register Definitions */
-#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
-#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
-
-#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
-#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
-
-/* SCB System Handler Control and State Register Definitions */
-#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
-#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
-
-/*@} end of group CMSIS_SCB */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
- \brief Type definitions for the System Control and ID Register not in the SCB
- @{
- */
-
-/**
- \brief Structure type to access the System Control and ID Register not in the SCB.
- */
-typedef struct
-{
- uint32_t RESERVED0[2U];
- __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
-} SCnSCB_Type;
-
-/* Auxiliary Control Register Definitions */
-#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */
-#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */
-
-/*@} end of group CMSIS_SCnotSCB */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_SysTick System Tick Timer (SysTick)
- \brief Type definitions for the System Timer Registers.
- @{
- */
-
-/**
- \brief Structure type to access the System Timer (SysTick).
- */
-typedef struct
-{
- __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
- __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
- __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
- __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
-} SysTick_Type;
-
-/* SysTick Control / Status Register Definitions */
-#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
-#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
-
-#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
-#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
-
-#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
-#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
-
-#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
-#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
-
-/* SysTick Reload Register Definitions */
-#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
-#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
-
-/* SysTick Current Register Definitions */
-#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
-#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
-
-/* SysTick Calibration Register Definitions */
-#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
-#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
-
-#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
-#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
-
-#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
-#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
-
-/*@} end of group CMSIS_SysTick */
-
-#if (__MPU_PRESENT == 1U)
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_MPU Memory Protection Unit (MPU)
- \brief Type definitions for the Memory Protection Unit (MPU)
- @{
- */
-
-/**
- \brief Structure type to access the Memory Protection Unit (MPU).
- */
-typedef struct
-{
- __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
- __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
- __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
- __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
- __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
-} MPU_Type;
-
-/* MPU Type Register Definitions */
-#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
-#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
-
-#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
-#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
-
-#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
-#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
-
-/* MPU Control Register Definitions */
-#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
-#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
-
-#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
-#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
-
-#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
-#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
-
-/* MPU Region Number Register Definitions */
-#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
-#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
-
-/* MPU Region Base Address Register Definitions */
-#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */
-#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
-
-#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
-#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
-
-#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
-#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
-
-/* MPU Region Attribute and Size Register Definitions */
-#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
-#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
-
-#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
-#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
-
-#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
-#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
-
-#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
-#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
-
-#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
-#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
-
-#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
-#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
-
-#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
-#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
-
-#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
-#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
-
-#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
-#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
-
-#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
-#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
-
-/*@} end of group CMSIS_MPU */
-#endif
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
- \brief SC000 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
- Therefore they are not covered by the SC000 header file.
- @{
- */
-/*@} end of group CMSIS_CoreDebug */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_core_bitfield Core register bit field macros
- \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
- @{
- */
-
-/**
- \brief Mask and shift a bit field value for use in a register bit range.
- \param[in] field Name of the register bit field.
- \param[in] value Value of the bit field.
- \return Masked and shifted value.
-*/
-#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
-
-/**
- \brief Mask and shift a register value to extract a bit filed value.
- \param[in] field Name of the register bit field.
- \param[in] value Value of register.
- \return Masked and shifted bit field value.
-*/
-#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
-
-/*@} end of group CMSIS_core_bitfield */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_core_base Core Definitions
- \brief Definitions for base addresses, unions, and structures.
- @{
- */
-
-/* Memory mapping of SC000 Hardware */
-#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
-#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
-#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
-#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
-
-#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
-#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
-#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
-#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
-
-#if (__MPU_PRESENT == 1U)
- #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
- #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
-#endif
-
-/*@} */
-
-
-
-/*******************************************************************************
- * Hardware Abstraction Layer
- Core Function Interface contains:
- - Core NVIC Functions
- - Core SysTick Functions
- - Core Register Access Functions
- ******************************************************************************/
-/**
- \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
-*/
-
-
-
-/* ########################## NVIC functions #################################### */
-/**
- \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_NVICFunctions NVIC Functions
- \brief Functions that manage interrupts and exceptions via the NVIC.
- @{
- */
-
-/* Interrupt Priorities are WORD accessible only under ARMv6M */
-/* The following MACROS handle generation of the register offset and byte masks */
-#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
-#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
-#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
-
-
-/**
- \brief Enable External Interrupt
- \details Enables a device-specific interrupt in the NVIC interrupt controller.
- \param [in] IRQn External interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
-{
- NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Disable External Interrupt
- \details Disables a device-specific interrupt in the NVIC interrupt controller.
- \param [in] IRQn External interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
-{
- NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Get Pending Interrupt
- \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
- \param [in] IRQn Interrupt number.
- \return 0 Interrupt status is not pending.
- \return 1 Interrupt status is pending.
- */
-__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
-{
- return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
-}
-
-
-/**
- \brief Set Pending Interrupt
- \details Sets the pending bit of an external interrupt.
- \param [in] IRQn Interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
-{
- NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Clear Pending Interrupt
- \details Clears the pending bit of an external interrupt.
- \param [in] IRQn External interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
-{
- NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Set Interrupt Priority
- \details Sets the priority of an interrupt.
- \note The priority cannot be set for every core interrupt.
- \param [in] IRQn Interrupt number.
- \param [in] priority Priority to set.
- */
-__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
-{
- if ((int32_t)(IRQn) < 0)
- {
- SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
- (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
- }
- else
- {
- NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
- (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
- }
-}
-
-
-/**
- \brief Get Interrupt Priority
- \details Reads the priority of an interrupt.
- The interrupt number can be positive to specify an external (device specific) interrupt,
- or negative to specify an internal (core) interrupt.
- \param [in] IRQn Interrupt number.
- \return Interrupt Priority.
- Value is aligned automatically to the implemented priority bits of the microcontroller.
- */
-__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
-{
-
- if ((int32_t)(IRQn) < 0)
- {
- return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
- }
- else
- {
- return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
- }
-}
-
-
-/**
- \brief System Reset
- \details Initiates a system reset request to reset the MCU.
- */
-__STATIC_INLINE void NVIC_SystemReset(void)
-{
- __DSB(); /* Ensure all outstanding memory accesses included
- buffered write are completed before reset */
- SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
- SCB_AIRCR_SYSRESETREQ_Msk);
- __DSB(); /* Ensure completion of memory access */
-
- for(;;) /* wait until reset */
- {
- __NOP();
- }
-}
-
-/*@} end of CMSIS_Core_NVICFunctions */
-
-
-
-/* ################################## SysTick function ############################################ */
-/**
- \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
- \brief Functions that configure the System.
- @{
- */
-
-#if (__Vendor_SysTickConfig == 0U)
-
-/**
- \brief System Tick Configuration
- \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
- Counter is in free running mode to generate periodic interrupts.
- \param [in] ticks Number of ticks between two interrupts.
- \return 0 Function succeeded.
- \return 1 Function failed.
- \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
- function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
- must contain a vendor-specific implementation of this function.
- */
-__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
-{
- if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
- {
- return (1UL); /* Reload value impossible */
- }
-
- SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
- NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
- SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
- SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
- SysTick_CTRL_TICKINT_Msk |
- SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
- return (0UL); /* Function successful */
-}
-
-#endif
-
-/*@} end of CMSIS_Core_SysTickFunctions */
-
-
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __CORE_SC000_H_DEPENDANT */
-
-#endif /* __CMSIS_GENERIC */
diff --git a/stm32cubemx/Drivers/CMSIS/Include/core_sc300.h b/stm32cubemx/Drivers/CMSIS/Include/core_sc300.h
deleted file mode 100644
index 8bd18aa..0000000
--- a/stm32cubemx/Drivers/CMSIS/Include/core_sc300.h
+++ /dev/null
@@ -1,1745 +0,0 @@
-/**************************************************************************//**
- * @file core_sc300.h
- * @brief CMSIS SC300 Core Peripheral Access Layer Header File
- * @version V4.30
- * @date 20. October 2015
- ******************************************************************************/
-/* Copyright (c) 2009 - 2015 ARM LIMITED
-
- All rights reserved.
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- - Neither the name of ARM nor the names of its contributors may be used
- to endorse or promote products derived from this software without
- specific prior written permission.
- *
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- POSSIBILITY OF SUCH DAMAGE.
- ---------------------------------------------------------------------------*/
-
-
-#if defined ( __ICCARM__ )
- #pragma system_include /* treat file as system include file for MISRA check */
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #pragma clang system_header /* treat file as system include file */
-#endif
-
-#ifndef __CORE_SC300_H_GENERIC
-#define __CORE_SC300_H_GENERIC
-
-#include <stdint.h>
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/**
- \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
- CMSIS violates the following MISRA-C:2004 rules:
-
- \li Required Rule 8.5, object/function definition in header file.<br>
- Function definitions in header files are used to allow 'inlining'.
-
- \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
- Unions are used for effective representation of core registers.
-
- \li Advisory Rule 19.7, Function-like macro defined.<br>
- Function-like macros are used to allow more efficient code.
- */
-
-
-/*******************************************************************************
- * CMSIS definitions
- ******************************************************************************/
-/**
- \ingroup SC3000
- @{
- */
-
-/* CMSIS SC300 definitions */
-#define __SC300_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */
-#define __SC300_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */
-#define __SC300_CMSIS_VERSION ((__SC300_CMSIS_VERSION_MAIN << 16U) | \
- __SC300_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
-
-#define __CORTEX_SC (300U) /*!< Cortex secure core */
-
-
-#if defined ( __CC_ARM )
- #define __ASM __asm /*!< asm keyword for ARM Compiler */
- #define __INLINE __inline /*!< inline keyword for ARM Compiler */
- #define __STATIC_INLINE static __inline
-
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #define __ASM __asm /*!< asm keyword for ARM Compiler */
- #define __INLINE __inline /*!< inline keyword for ARM Compiler */
- #define __STATIC_INLINE static __inline
-
-#elif defined ( __GNUC__ )
- #define __ASM __asm /*!< asm keyword for GNU Compiler */
- #define __INLINE inline /*!< inline keyword for GNU Compiler */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __ICCARM__ )
- #define __ASM __asm /*!< asm keyword for IAR Compiler */
- #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __TMS470__ )
- #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __TASKING__ )
- #define __ASM __asm /*!< asm keyword for TASKING Compiler */
- #define __INLINE inline /*!< inline keyword for TASKING Compiler */
- #define __STATIC_INLINE static inline
-
-#elif defined ( __CSMC__ )
- #define __packed
- #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
- #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */
- #define __STATIC_INLINE static inline
-
-#else
- #error Unknown compiler
-#endif
-
-/** __FPU_USED indicates whether an FPU is used or not.
- This core does not support an FPU at all
-*/
-#define __FPU_USED 0U
-
-#if defined ( __CC_ARM )
- #if defined __TARGET_FPU_VFP
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
- #if defined __ARM_PCS_VFP
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __GNUC__ )
- #if defined (__VFP_FP__) && !defined(__SOFTFP__)
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __ICCARM__ )
- #if defined __ARMVFP__
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __TMS470__ )
- #if defined __TI_VFP_SUPPORT__
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __TASKING__ )
- #if defined __FPU_VFP__
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#elif defined ( __CSMC__ )
- #if ( __CSMC__ & 0x400U)
- #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
- #endif
-
-#endif
-
-#include "core_cmInstr.h" /* Core Instruction Access */
-#include "core_cmFunc.h" /* Core Function Access */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __CORE_SC300_H_GENERIC */
-
-#ifndef __CMSIS_GENERIC
-
-#ifndef __CORE_SC300_H_DEPENDANT
-#define __CORE_SC300_H_DEPENDANT
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* check device defines and use defaults */
-#if defined __CHECK_DEVICE_DEFINES
- #ifndef __SC300_REV
- #define __SC300_REV 0x0000U
- #warning "__SC300_REV not defined in device header file; using default!"
- #endif
-
- #ifndef __MPU_PRESENT
- #define __MPU_PRESENT 0U
- #warning "__MPU_PRESENT not defined in device header file; using default!"
- #endif
-
- #ifndef __NVIC_PRIO_BITS
- #define __NVIC_PRIO_BITS 4U
- #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
- #endif
-
- #ifndef __Vendor_SysTickConfig
- #define __Vendor_SysTickConfig 0U
- #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
- #endif
-#endif
-
-/* IO definitions (access restrictions to peripheral registers) */
-/**
- \defgroup CMSIS_glob_defs CMSIS Global Defines
-
- <strong>IO Type Qualifiers</strong> are used
- \li to specify the access to peripheral variables.
- \li for automatic generation of peripheral register debug information.
-*/
-#ifdef __cplusplus
- #define __I volatile /*!< Defines 'read only' permissions */
-#else
- #define __I volatile const /*!< Defines 'read only' permissions */
-#endif
-#define __O volatile /*!< Defines 'write only' permissions */
-#define __IO volatile /*!< Defines 'read / write' permissions */
-
-/* following defines should be used for structure members */
-#define __IM volatile const /*! Defines 'read only' structure member permissions */
-#define __OM volatile /*! Defines 'write only' structure member permissions */
-#define __IOM volatile /*! Defines 'read / write' structure member permissions */
-
-/*@} end of group SC300 */
-
-
-
-/*******************************************************************************
- * Register Abstraction
- Core Register contain:
- - Core Register
- - Core NVIC Register
- - Core SCB Register
- - Core SysTick Register
- - Core Debug Register
- - Core MPU Register
- ******************************************************************************/
-/**
- \defgroup CMSIS_core_register Defines and Type Definitions
- \brief Type definitions and defines for Cortex-M processor based devices.
-*/
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_CORE Status and Control Registers
- \brief Core Register type definitions.
- @{
- */
-
-/**
- \brief Union type to access the Application Program Status Register (APSR).
- */
-typedef union
-{
- struct
- {
- uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
- uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
- uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
- uint32_t C:1; /*!< bit: 29 Carry condition code flag */
- uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
- uint32_t N:1; /*!< bit: 31 Negative condition code flag */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} APSR_Type;
-
-/* APSR Register Definitions */
-#define APSR_N_Pos 31U /*!< APSR: N Position */
-#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
-
-#define APSR_Z_Pos 30U /*!< APSR: Z Position */
-#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
-
-#define APSR_C_Pos 29U /*!< APSR: C Position */
-#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
-
-#define APSR_V_Pos 28U /*!< APSR: V Position */
-#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
-
-#define APSR_Q_Pos 27U /*!< APSR: Q Position */
-#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */
-
-
-/**
- \brief Union type to access the Interrupt Program Status Register (IPSR).
- */
-typedef union
-{
- struct
- {
- uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
- uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} IPSR_Type;
-
-/* IPSR Register Definitions */
-#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
-#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
-
-
-/**
- \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
- */
-typedef union
-{
- struct
- {
- uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
- uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
- uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
- uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
- uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
- uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
- uint32_t C:1; /*!< bit: 29 Carry condition code flag */
- uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
- uint32_t N:1; /*!< bit: 31 Negative condition code flag */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} xPSR_Type;
-
-/* xPSR Register Definitions */
-#define xPSR_N_Pos 31U /*!< xPSR: N Position */
-#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
-
-#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
-#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
-
-#define xPSR_C_Pos 29U /*!< xPSR: C Position */
-#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
-
-#define xPSR_V_Pos 28U /*!< xPSR: V Position */
-#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
-
-#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */
-#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */
-
-#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */
-#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */
-
-#define xPSR_T_Pos 24U /*!< xPSR: T Position */
-#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
-
-#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
-#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
-
-
-/**
- \brief Union type to access the Control Registers (CONTROL).
- */
-typedef union
-{
- struct
- {
- uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
- uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
- uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
- } b; /*!< Structure used for bit access */
- uint32_t w; /*!< Type used for word access */
-} CONTROL_Type;
-
-/* CONTROL Register Definitions */
-#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
-#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
-
-#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */
-#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */
-
-/*@} end of group CMSIS_CORE */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
- \brief Type definitions for the NVIC Registers
- @{
- */
-
-/**
- \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
- */
-typedef struct
-{
- __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
- uint32_t RESERVED0[24U];
- __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
- uint32_t RSERVED1[24U];
- __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
- uint32_t RESERVED2[24U];
- __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
- uint32_t RESERVED3[24U];
- __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
- uint32_t RESERVED4[56U];
- __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
- uint32_t RESERVED5[644U];
- __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
-} NVIC_Type;
-
-/* Software Triggered Interrupt Register Definitions */
-#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */
-#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */
-
-/*@} end of group CMSIS_NVIC */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_SCB System Control Block (SCB)
- \brief Type definitions for the System Control Block Registers
- @{
- */
-
-/**
- \brief Structure type to access the System Control Block (SCB).
- */
-typedef struct
-{
- __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
- __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
- __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
- __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
- __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
- __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
- __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
- __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
- __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
- __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
- __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
- __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
- __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
- __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
- __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
- __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
- __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
- __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
- __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
- uint32_t RESERVED0[5U];
- __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
- uint32_t RESERVED1[129U];
- __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */
-} SCB_Type;
-
-/* SCB CPUID Register Definitions */
-#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
-#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
-
-#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
-#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
-
-#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
-#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
-
-#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
-#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
-
-#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
-#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
-
-/* SCB Interrupt Control State Register Definitions */
-#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
-#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
-
-#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
-#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
-
-#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
-#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
-
-#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
-#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
-
-#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
-#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
-
-#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
-#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
-
-#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
-#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
-
-#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
-#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
-
-#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */
-#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
-
-#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
-#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
-
-/* SCB Vector Table Offset Register Definitions */
-#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */
-#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
-
-#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */
-#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
-
-/* SCB Application Interrupt and Reset Control Register Definitions */
-#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
-#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
-
-#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
-#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
-
-#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
-#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
-
-#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */
-#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
-
-#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
-#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
-
-#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
-#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
-
-#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */
-#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */
-
-/* SCB System Control Register Definitions */
-#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
-#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
-
-#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
-#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
-
-#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
-#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
-
-/* SCB Configuration Control Register Definitions */
-#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
-#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
-
-#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */
-#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
-
-#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */
-#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
-
-#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
-#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
-
-#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */
-#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
-
-#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */
-#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */
-
-/* SCB System Handler Control and State Register Definitions */
-#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */
-#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
-
-#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */
-#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
-
-#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */
-#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
-
-#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
-#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
-
-#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */
-#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
-
-#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */
-#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
-
-#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */
-#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
-
-#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */
-#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
-
-#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */
-#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
-
-#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */
-#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
-
-#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */
-#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
-
-#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */
-#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
-
-#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */
-#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
-
-#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */
-#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */
-
-/* SCB Configurable Fault Status Register Definitions */
-#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */
-#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
-
-#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */
-#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
-
-#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */
-#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
-
-/* SCB Hard Fault Status Register Definitions */
-#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */
-#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
-
-#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */
-#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
-
-#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */
-#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
-
-/* SCB Debug Fault Status Register Definitions */
-#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */
-#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
-
-#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */
-#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
-
-#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */
-#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
-
-#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */
-#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
-
-#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */
-#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */
-
-/*@} end of group CMSIS_SCB */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
- \brief Type definitions for the System Control and ID Register not in the SCB
- @{
- */
-
-/**
- \brief Structure type to access the System Control and ID Register not in the SCB.
- */
-typedef struct
-{
- uint32_t RESERVED0[1U];
- __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
- uint32_t RESERVED1[1U];
-} SCnSCB_Type;
-
-/* Interrupt Controller Type Register Definitions */
-#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */
-#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */
-
-/*@} end of group CMSIS_SCnotSCB */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_SysTick System Tick Timer (SysTick)
- \brief Type definitions for the System Timer Registers.
- @{
- */
-
-/**
- \brief Structure type to access the System Timer (SysTick).
- */
-typedef struct
-{
- __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
- __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
- __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
- __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
-} SysTick_Type;
-
-/* SysTick Control / Status Register Definitions */
-#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
-#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
-
-#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
-#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
-
-#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
-#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
-
-#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
-#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
-
-/* SysTick Reload Register Definitions */
-#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
-#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
-
-/* SysTick Current Register Definitions */
-#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
-#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
-
-/* SysTick Calibration Register Definitions */
-#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
-#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
-
-#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
-#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
-
-#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
-#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
-
-/*@} end of group CMSIS_SysTick */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
- \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
- @{
- */
-
-/**
- \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
- */
-typedef struct
-{
- __OM union
- {
- __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
- __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
- __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
- } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
- uint32_t RESERVED0[864U];
- __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
- uint32_t RESERVED1[15U];
- __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
- uint32_t RESERVED2[15U];
- __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
- uint32_t RESERVED3[29U];
- __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
- __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
- __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
- uint32_t RESERVED4[43U];
- __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
- __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
- uint32_t RESERVED5[6U];
- __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
- __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
- __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
- __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
- __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
- __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
- __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
- __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
- __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
- __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
- __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
- __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
-} ITM_Type;
-
-/* ITM Trace Privilege Register Definitions */
-#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */
-#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */
-
-/* ITM Trace Control Register Definitions */
-#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */
-#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
-
-#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */
-#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
-
-#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */
-#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
-
-#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */
-#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
-
-#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */
-#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
-
-#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */
-#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
-
-#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */
-#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
-
-#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */
-#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
-
-#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */
-#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */
-
-/* ITM Integration Write Register Definitions */
-#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */
-#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */
-
-/* ITM Integration Read Register Definitions */
-#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */
-#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */
-
-/* ITM Integration Mode Control Register Definitions */
-#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */
-#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */
-
-/* ITM Lock Status Register Definitions */
-#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */
-#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
-
-#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */
-#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
-
-#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */
-#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */
-
-/*@}*/ /* end of group CMSIS_ITM */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
- \brief Type definitions for the Data Watchpoint and Trace (DWT)
- @{
- */
-
-/**
- \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
- */
-typedef struct
-{
- __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
- __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
- __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
- __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
- __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
- __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
- __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
- __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
- __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
- __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
- __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
- uint32_t RESERVED0[1U];
- __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
- __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
- __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
- uint32_t RESERVED1[1U];
- __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
- __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
- __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
- uint32_t RESERVED2[1U];
- __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
- __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
- __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
-} DWT_Type;
-
-/* DWT Control Register Definitions */
-#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */
-#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
-
-#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */
-#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
-
-#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */
-#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
-
-#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */
-#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
-
-#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */
-#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
-
-#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */
-#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
-
-#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */
-#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
-
-#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */
-#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
-
-#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */
-#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
-
-#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */
-#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
-
-#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */
-#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
-
-#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */
-#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
-
-#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */
-#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
-
-#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */
-#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
-
-#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */
-#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
-
-#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */
-#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
-
-#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */
-#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
-
-#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */
-#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */
-
-/* DWT CPI Count Register Definitions */
-#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */
-#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */
-
-/* DWT Exception Overhead Count Register Definitions */
-#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */
-#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */
-
-/* DWT Sleep Count Register Definitions */
-#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */
-#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
-
-/* DWT LSU Count Register Definitions */
-#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */
-#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */
-
-/* DWT Folded-instruction Count Register Definitions */
-#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */
-#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */
-
-/* DWT Comparator Mask Register Definitions */
-#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */
-#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */
-
-/* DWT Comparator Function Register Definitions */
-#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */
-#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
-
-#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */
-#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
-
-#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */
-#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
-
-#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */
-#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
-
-#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */
-#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
-
-#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */
-#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
-
-#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */
-#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
-
-#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */
-#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
-
-#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */
-#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */
-
-/*@}*/ /* end of group CMSIS_DWT */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_TPI Trace Port Interface (TPI)
- \brief Type definitions for the Trace Port Interface (TPI)
- @{
- */
-
-/**
- \brief Structure type to access the Trace Port Interface Register (TPI).
- */
-typedef struct
-{
- __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
- __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
- uint32_t RESERVED0[2U];
- __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
- uint32_t RESERVED1[55U];
- __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
- uint32_t RESERVED2[131U];
- __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
- __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
- __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
- uint32_t RESERVED3[759U];
- __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
- __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
- __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
- uint32_t RESERVED4[1U];
- __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
- __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
- __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
- uint32_t RESERVED5[39U];
- __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
- __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
- uint32_t RESERVED7[8U];
- __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
- __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
-} TPI_Type;
-
-/* TPI Asynchronous Clock Prescaler Register Definitions */
-#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */
-#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */
-
-/* TPI Selected Pin Protocol Register Definitions */
-#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */
-#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */
-
-/* TPI Formatter and Flush Status Register Definitions */
-#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */
-#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
-
-#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */
-#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
-
-#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */
-#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
-
-#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */
-#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */
-
-/* TPI Formatter and Flush Control Register Definitions */
-#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */
-#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
-
-#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */
-#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
-
-/* TPI TRIGGER Register Definitions */
-#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */
-#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */
-
-/* TPI Integration ETM Data Register Definitions (FIFO0) */
-#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */
-#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
-
-#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */
-#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
-
-#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */
-#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
-
-#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */
-#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
-
-#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */
-#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
-
-#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */
-#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
-
-#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */
-#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */
-
-/* TPI ITATBCTR2 Register Definitions */
-#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */
-#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */
-
-/* TPI Integration ITM Data Register Definitions (FIFO1) */
-#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */
-#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
-
-#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */
-#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
-
-#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */
-#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
-
-#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */
-#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
-
-#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */
-#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
-
-#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */
-#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
-
-#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */
-#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */
-
-/* TPI ITATBCTR0 Register Definitions */
-#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */
-#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */
-
-/* TPI Integration Mode Control Register Definitions */
-#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */
-#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */
-
-/* TPI DEVID Register Definitions */
-#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */
-#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
-
-#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */
-#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
-
-#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */
-#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
-
-#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */
-#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
-
-#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */
-#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
-
-#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */
-#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */
-
-/* TPI DEVTYPE Register Definitions */
-#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */
-#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
-
-#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */
-#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */
-
-/*@}*/ /* end of group CMSIS_TPI */
-
-
-#if (__MPU_PRESENT == 1U)
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_MPU Memory Protection Unit (MPU)
- \brief Type definitions for the Memory Protection Unit (MPU)
- @{
- */
-
-/**
- \brief Structure type to access the Memory Protection Unit (MPU).
- */
-typedef struct
-{
- __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
- __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
- __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
- __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
- __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
- __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
- __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
- __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
- __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
- __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
- __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
-} MPU_Type;
-
-/* MPU Type Register Definitions */
-#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */
-#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
-
-#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */
-#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
-
-#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */
-#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */
-
-/* MPU Control Register Definitions */
-#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */
-#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
-
-#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */
-#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
-
-#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */
-#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */
-
-/* MPU Region Number Register Definitions */
-#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */
-#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */
-
-/* MPU Region Base Address Register Definitions */
-#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */
-#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
-
-#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */
-#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
-
-#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */
-#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */
-
-/* MPU Region Attribute and Size Register Definitions */
-#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */
-#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
-
-#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */
-#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
-
-#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */
-#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
-
-#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */
-#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
-
-#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */
-#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
-
-#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */
-#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
-
-#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */
-#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
-
-#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */
-#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
-
-#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */
-#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
-
-#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */
-#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */
-
-/*@} end of group CMSIS_MPU */
-#endif
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
- \brief Type definitions for the Core Debug Registers
- @{
- */
-
-/**
- \brief Structure type to access the Core Debug Register (CoreDebug).
- */
-typedef struct
-{
- __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
- __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
- __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
- __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
-} CoreDebug_Type;
-
-/* Debug Halting Control and Status Register Definitions */
-#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */
-#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
-
-#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */
-#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
-
-#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
-#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
-
-#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */
-#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
-
-#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */
-#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
-
-#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */
-#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
-
-#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */
-#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
-
-#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
-#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
-
-#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */
-#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
-
-#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */
-#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
-
-#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */
-#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
-
-#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */
-#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
-
-/* Debug Core Register Selector Register Definitions */
-#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */
-#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
-
-#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */
-#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */
-
-/* Debug Exception and Monitor Control Register Definitions */
-#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */
-#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
-
-#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */
-#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
-
-#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */
-#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
-
-#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */
-#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
-
-#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */
-#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
-
-#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */
-#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
-
-#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */
-#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
-
-#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */
-#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
-
-#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */
-#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
-
-#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */
-#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
-
-#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */
-#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
-
-#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */
-#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
-
-#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */
-#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
-
-/*@} end of group CMSIS_CoreDebug */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_core_bitfield Core register bit field macros
- \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
- @{
- */
-
-/**
- \brief Mask and shift a bit field value for use in a register bit range.
- \param[in] field Name of the register bit field.
- \param[in] value Value of the bit field.
- \return Masked and shifted value.
-*/
-#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk)
-
-/**
- \brief Mask and shift a register value to extract a bit filed value.
- \param[in] field Name of the register bit field.
- \param[in] value Value of register.
- \return Masked and shifted bit field value.
-*/
-#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos)
-
-/*@} end of group CMSIS_core_bitfield */
-
-
-/**
- \ingroup CMSIS_core_register
- \defgroup CMSIS_core_base Core Definitions
- \brief Definitions for base addresses, unions, and structures.
- @{
- */
-
-/* Memory mapping of Cortex-M3 Hardware */
-#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
-#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
-#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
-#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
-#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
-#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
-#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
-#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
-
-#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
-#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
-#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
-#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
-#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
-#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
-#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
-#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
-
-#if (__MPU_PRESENT == 1U)
- #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
- #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
-#endif
-
-/*@} */
-
-
-
-/*******************************************************************************
- * Hardware Abstraction Layer
- Core Function Interface contains:
- - Core NVIC Functions
- - Core SysTick Functions
- - Core Debug Functions
- - Core Register Access Functions
- ******************************************************************************/
-/**
- \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
-*/
-
-
-
-/* ########################## NVIC functions #################################### */
-/**
- \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_NVICFunctions NVIC Functions
- \brief Functions that manage interrupts and exceptions via the NVIC.
- @{
- */
-
-/**
- \brief Set Priority Grouping
- \details Sets the priority grouping field using the required unlock sequence.
- The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
- Only values from 0..7 are used.
- In case of a conflict between priority grouping and available
- priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
- \param [in] PriorityGroup Priority grouping field.
- */
-__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
-{
- uint32_t reg_value;
- uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
-
- reg_value = SCB->AIRCR; /* read old register configuration */
- reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */
- reg_value = (reg_value |
- ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
- (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */
- SCB->AIRCR = reg_value;
-}
-
-
-/**
- \brief Get Priority Grouping
- \details Reads the priority grouping field from the NVIC Interrupt Controller.
- \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
- */
-__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
-{
- return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
-}
-
-
-/**
- \brief Enable External Interrupt
- \details Enables a device-specific interrupt in the NVIC interrupt controller.
- \param [in] IRQn External interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
-{
- NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Disable External Interrupt
- \details Disables a device-specific interrupt in the NVIC interrupt controller.
- \param [in] IRQn External interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
-{
- NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Get Pending Interrupt
- \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt.
- \param [in] IRQn Interrupt number.
- \return 0 Interrupt status is not pending.
- \return 1 Interrupt status is pending.
- */
-__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
-{
- return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
-}
-
-
-/**
- \brief Set Pending Interrupt
- \details Sets the pending bit of an external interrupt.
- \param [in] IRQn Interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
-{
- NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Clear Pending Interrupt
- \details Clears the pending bit of an external interrupt.
- \param [in] IRQn External interrupt number. Value cannot be negative.
- */
-__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
-{
- NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
-}
-
-
-/**
- \brief Get Active Interrupt
- \details Reads the active register in NVIC and returns the active bit.
- \param [in] IRQn Interrupt number.
- \return 0 Interrupt status is not active.
- \return 1 Interrupt status is active.
- */
-__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
-{
- return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
-}
-
-
-/**
- \brief Set Interrupt Priority
- \details Sets the priority of an interrupt.
- \note The priority cannot be set for every core interrupt.
- \param [in] IRQn Interrupt number.
- \param [in] priority Priority to set.
- */
-__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
-{
- if ((int32_t)(IRQn) < 0)
- {
- SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
- }
- else
- {
- NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
- }
-}
-
-
-/**
- \brief Get Interrupt Priority
- \details Reads the priority of an interrupt.
- The interrupt number can be positive to specify an external (device specific) interrupt,
- or negative to specify an internal (core) interrupt.
- \param [in] IRQn Interrupt number.
- \return Interrupt Priority.
- Value is aligned automatically to the implemented priority bits of the microcontroller.
- */
-__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
-{
-
- if ((int32_t)(IRQn) < 0)
- {
- return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS)));
- }
- else
- {
- return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS)));
- }
-}
-
-
-/**
- \brief Encode Priority
- \details Encodes the priority for an interrupt with the given priority group,
- preemptive priority value, and subpriority value.
- In case of a conflict between priority grouping and available
- priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
- \param [in] PriorityGroup Used priority group.
- \param [in] PreemptPriority Preemptive priority value (starting from 0).
- \param [in] SubPriority Subpriority value (starting from 0).
- \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
- */
-__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
-{
- uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
- uint32_t PreemptPriorityBits;
- uint32_t SubPriorityBits;
-
- PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
- SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
-
- return (
- ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
- ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
- );
-}
-
-
-/**
- \brief Decode Priority
- \details Decodes an interrupt priority value with a given priority group to
- preemptive priority value and subpriority value.
- In case of a conflict between priority grouping and available
- priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
- \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
- \param [in] PriorityGroup Used priority group.
- \param [out] pPreemptPriority Preemptive priority value (starting from 0).
- \param [out] pSubPriority Subpriority value (starting from 0).
- */
-__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
-{
- uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
- uint32_t PreemptPriorityBits;
- uint32_t SubPriorityBits;
-
- PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
- SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
-
- *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
- *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
-}
-
-
-/**
- \brief System Reset
- \details Initiates a system reset request to reset the MCU.
- */
-__STATIC_INLINE void NVIC_SystemReset(void)
-{
- __DSB(); /* Ensure all outstanding memory accesses included
- buffered write are completed before reset */
- SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
- (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
- SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */
- __DSB(); /* Ensure completion of memory access */
-
- for(;;) /* wait until reset */
- {
- __NOP();
- }
-}
-
-/*@} end of CMSIS_Core_NVICFunctions */
-
-
-
-/* ################################## SysTick function ############################################ */
-/**
- \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
- \brief Functions that configure the System.
- @{
- */
-
-#if (__Vendor_SysTickConfig == 0U)
-
-/**
- \brief System Tick Configuration
- \details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
- Counter is in free running mode to generate periodic interrupts.
- \param [in] ticks Number of ticks between two interrupts.
- \return 0 Function succeeded.
- \return 1 Function failed.
- \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
- function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
- must contain a vendor-specific implementation of this function.
- */
-__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
-{
- if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
- {
- return (1UL); /* Reload value impossible */
- }
-
- SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
- NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
- SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
- SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
- SysTick_CTRL_TICKINT_Msk |
- SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
- return (0UL); /* Function successful */
-}
-
-#endif
-
-/*@} end of CMSIS_Core_SysTickFunctions */
-
-
-
-/* ##################################### Debug In/Output function ########################################### */
-/**
- \ingroup CMSIS_Core_FunctionInterface
- \defgroup CMSIS_core_DebugFunctions ITM Functions
- \brief Functions that access the ITM debug interface.
- @{
- */
-
-extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
-#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
-
-
-/**
- \brief ITM Send Character
- \details Transmits a character via the ITM channel 0, and
- \li Just returns when no debugger is connected that has booked the output.
- \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
- \param [in] ch Character to transmit.
- \returns Character to transmit.
- */
-__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
-{
- if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */
- ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */
- {
- while (ITM->PORT[0U].u32 == 0UL)
- {
- __NOP();
- }
- ITM->PORT[0U].u8 = (uint8_t)ch;
- }
- return (ch);
-}
-
-
-/**
- \brief ITM Receive Character
- \details Inputs a character via the external variable \ref ITM_RxBuffer.
- \return Received character.
- \return -1 No character pending.
- */
-__STATIC_INLINE int32_t ITM_ReceiveChar (void)
-{
- int32_t ch = -1; /* no character available */
-
- if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY)
- {
- ch = ITM_RxBuffer;
- ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
- }
-
- return (ch);
-}
-
-
-/**
- \brief ITM Check Character
- \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
- \return 0 No character available.
- \return 1 Character available.
- */
-__STATIC_INLINE int32_t ITM_CheckChar (void)
-{
-
- if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY)
- {
- return (0); /* no character available */
- }
- else
- {
- return (1); /* character available */
- }
-}
-
-/*@} end of CMSIS_core_DebugFunctions */
-
-
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __CORE_SC300_H_DEPENDANT */
-
-#endif /* __CMSIS_GENERIC */
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
deleted file mode 100644
index ef1a2bb..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
+++ /dev/null
@@ -1,3123 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32_hal_legacy.h
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief This file contains aliases definition for the STM32Cube HAL constants
- * macros and functions maintained for legacy purpose.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32_HAL_LEGACY
-#define __STM32_HAL_LEGACY
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose
- * @{
- */
-#define AES_FLAG_RDERR CRYP_FLAG_RDERR
-#define AES_FLAG_WRERR CRYP_FLAG_WRERR
-#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF
-#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR
-#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR
-
-/**
- * @}
- */
-
-/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose
- * @{
- */
-#define ADC_RESOLUTION12b ADC_RESOLUTION_12B
-#define ADC_RESOLUTION10b ADC_RESOLUTION_10B
-#define ADC_RESOLUTION8b ADC_RESOLUTION_8B
-#define ADC_RESOLUTION6b ADC_RESOLUTION_6B
-#define OVR_DATA_OVERWRITTEN ADC_OVR_DATA_OVERWRITTEN
-#define OVR_DATA_PRESERVED ADC_OVR_DATA_PRESERVED
-#define EOC_SINGLE_CONV ADC_EOC_SINGLE_CONV
-#define EOC_SEQ_CONV ADC_EOC_SEQ_CONV
-#define EOC_SINGLE_SEQ_CONV ADC_EOC_SINGLE_SEQ_CONV
-#define REGULAR_GROUP ADC_REGULAR_GROUP
-#define INJECTED_GROUP ADC_INJECTED_GROUP
-#define REGULAR_INJECTED_GROUP ADC_REGULAR_INJECTED_GROUP
-#define AWD_EVENT ADC_AWD_EVENT
-#define AWD1_EVENT ADC_AWD1_EVENT
-#define AWD2_EVENT ADC_AWD2_EVENT
-#define AWD3_EVENT ADC_AWD3_EVENT
-#define OVR_EVENT ADC_OVR_EVENT
-#define JQOVF_EVENT ADC_JQOVF_EVENT
-#define ALL_CHANNELS ADC_ALL_CHANNELS
-#define REGULAR_CHANNELS ADC_REGULAR_CHANNELS
-#define INJECTED_CHANNELS ADC_INJECTED_CHANNELS
-#define SYSCFG_FLAG_SENSOR_ADC ADC_FLAG_SENSOR
-#define SYSCFG_FLAG_VREF_ADC ADC_FLAG_VREFINT
-#define ADC_CLOCKPRESCALER_PCLK_DIV1 ADC_CLOCK_SYNC_PCLK_DIV1
-#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2
-#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4
-#define ADC_CLOCKPRESCALER_PCLK_DIV6 ADC_CLOCK_SYNC_PCLK_DIV6
-#define ADC_CLOCKPRESCALER_PCLK_DIV8 ADC_CLOCK_SYNC_PCLK_DIV8
-#define ADC_EXTERNALTRIG0_T6_TRGO ADC_EXTERNALTRIGCONV_T6_TRGO
-#define ADC_EXTERNALTRIG1_T21_CC2 ADC_EXTERNALTRIGCONV_T21_CC2
-#define ADC_EXTERNALTRIG2_T2_TRGO ADC_EXTERNALTRIGCONV_T2_TRGO
-#define ADC_EXTERNALTRIG3_T2_CC4 ADC_EXTERNALTRIGCONV_T2_CC4
-#define ADC_EXTERNALTRIG4_T22_TRGO ADC_EXTERNALTRIGCONV_T22_TRGO
-#define ADC_EXTERNALTRIG7_EXT_IT11 ADC_EXTERNALTRIGCONV_EXT_IT11
-#define ADC_CLOCK_ASYNC ADC_CLOCK_ASYNC_DIV1
-#define ADC_EXTERNALTRIG_EDGE_NONE ADC_EXTERNALTRIGCONVEDGE_NONE
-#define ADC_EXTERNALTRIG_EDGE_RISING ADC_EXTERNALTRIGCONVEDGE_RISING
-#define ADC_EXTERNALTRIG_EDGE_FALLING ADC_EXTERNALTRIGCONVEDGE_FALLING
-#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING
-#define ADC_SAMPLETIME_2CYCLE_5 ADC_SAMPLETIME_2CYCLES_5
-
-#define HAL_ADC_STATE_BUSY_REG HAL_ADC_STATE_REG_BUSY
-#define HAL_ADC_STATE_BUSY_INJ HAL_ADC_STATE_INJ_BUSY
-#define HAL_ADC_STATE_EOC_REG HAL_ADC_STATE_REG_EOC
-#define HAL_ADC_STATE_EOC_INJ HAL_ADC_STATE_INJ_EOC
-#define HAL_ADC_STATE_ERROR HAL_ADC_STATE_ERROR_INTERNAL
-#define HAL_ADC_STATE_BUSY HAL_ADC_STATE_BUSY_INTERNAL
-#define HAL_ADC_STATE_AWD HAL_ADC_STATE_AWD1
-/**
- * @}
- */
-
-/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose
- * @{
- */
-
-#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG
-
-/**
- * @}
- */
-
-/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose
- * @{
- */
-#define COMP_WINDOWMODE_DISABLED COMP_WINDOWMODE_DISABLE
-#define COMP_WINDOWMODE_ENABLED COMP_WINDOWMODE_ENABLE
-#define COMP_EXTI_LINE_COMP1_EVENT COMP_EXTI_LINE_COMP1
-#define COMP_EXTI_LINE_COMP2_EVENT COMP_EXTI_LINE_COMP2
-#define COMP_EXTI_LINE_COMP3_EVENT COMP_EXTI_LINE_COMP3
-#define COMP_EXTI_LINE_COMP4_EVENT COMP_EXTI_LINE_COMP4
-#define COMP_EXTI_LINE_COMP5_EVENT COMP_EXTI_LINE_COMP5
-#define COMP_EXTI_LINE_COMP6_EVENT COMP_EXTI_LINE_COMP6
-#define COMP_EXTI_LINE_COMP7_EVENT COMP_EXTI_LINE_COMP7
-#define COMP_OUTPUT_COMP6TIM2OCREFCLR COMP_OUTPUT_COMP6_TIM2OCREFCLR
-#if defined(STM32F373xC) || defined(STM32F378xx)
-#define COMP_OUTPUT_TIM3IC1 COMP_OUTPUT_COMP1_TIM3IC1
-#define COMP_OUTPUT_TIM3OCREFCLR COMP_OUTPUT_COMP1_TIM3OCREFCLR
-#endif /* STM32F373xC || STM32F378xx */
-
-#if defined(STM32L0) || defined(STM32L4)
-#define COMP_WINDOWMODE_ENABLE COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON
-
-#define COMP_NONINVERTINGINPUT_IO1 COMP_INPUT_PLUS_IO1
-#define COMP_NONINVERTINGINPUT_IO2 COMP_INPUT_PLUS_IO2
-#define COMP_NONINVERTINGINPUT_IO3 COMP_INPUT_PLUS_IO3
-
-#define COMP_INVERTINGINPUT_1_4VREFINT COMP_INPUT_MINUS_1_4VREFINT
-#define COMP_INVERTINGINPUT_1_2VREFINT COMP_INPUT_MINUS_1_2VREFINT
-#define COMP_INVERTINGINPUT_3_4VREFINT COMP_INPUT_MINUS_3_4VREFINT
-#define COMP_INVERTINGINPUT_VREFINT COMP_INPUT_MINUS_VREFINT
-#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_INPUT_MINUS_DAC1_CH1
-#define COMP_INVERTINGINPUT_DAC1_CH2 COMP_INPUT_MINUS_DAC1_CH2
-#define COMP_INVERTINGINPUT_DAC1 COMP_INPUT_MINUS_DAC1_CH1
-#define COMP_INVERTINGINPUT_DAC2 COMP_INPUT_MINUS_DAC1_CH2
-#define COMP_INVERTINGINPUT_IO1 COMP_INPUT_MINUS_IO1
-#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_IO2
-#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO3
-#define COMP_INVERTINGINPUT_IO4 COMP_INPUT_MINUS_IO4
-#define COMP_INVERTINGINPUT_IO5 COMP_INPUT_MINUS_IO5
-
-#define COMP_OUTPUTLEVEL_LOW COMP_OUTPUT_LEVEL_LOW
-#define COMP_OUTPUTLEVEL_HIGH COMP_OUTPUT_LEVEL_HIGH
-
-/* Note: Literal "COMP_FLAG_LOCK" kept for legacy purpose. */
-/* To check COMP lock state, use macro "__HAL_COMP_IS_LOCKED()". */
-#if defined(COMP_CSR_LOCK)
-#define COMP_FLAG_LOCK COMP_CSR_LOCK
-#elif defined(COMP_CSR_COMP1LOCK)
-#define COMP_FLAG_LOCK COMP_CSR_COMP1LOCK
-#elif defined(COMP_CSR_COMPxLOCK)
-#define COMP_FLAG_LOCK COMP_CSR_COMPxLOCK
-#endif
-
-#if defined(STM32L4)
-#define COMP_BLANKINGSRCE_TIM1OC5 COMP_BLANKINGSRC_TIM1_OC5_COMP1
-#define COMP_BLANKINGSRCE_TIM2OC3 COMP_BLANKINGSRC_TIM2_OC3_COMP1
-#define COMP_BLANKINGSRCE_TIM3OC3 COMP_BLANKINGSRC_TIM3_OC3_COMP1
-#define COMP_BLANKINGSRCE_TIM3OC4 COMP_BLANKINGSRC_TIM3_OC4_COMP2
-#define COMP_BLANKINGSRCE_TIM8OC5 COMP_BLANKINGSRC_TIM8_OC5_COMP2
-#define COMP_BLANKINGSRCE_TIM15OC1 COMP_BLANKINGSRC_TIM15_OC1_COMP2
-#define COMP_BLANKINGSRCE_NONE COMP_BLANKINGSRC_NONE
-#endif
-
-#if defined(STM32L0)
-#define COMP_MODE_HIGHSPEED COMP_POWERMODE_MEDIUMSPEED
-#define COMP_MODE_LOWSPEED COMP_POWERMODE_ULTRALOWPOWER
-#else
-#define COMP_MODE_HIGHSPEED COMP_POWERMODE_HIGHSPEED
-#define COMP_MODE_MEDIUMSPEED COMP_POWERMODE_MEDIUMSPEED
-#define COMP_MODE_LOWPOWER COMP_POWERMODE_LOWPOWER
-#define COMP_MODE_ULTRALOWPOWER COMP_POWERMODE_ULTRALOWPOWER
-#endif
-
-#endif
-/**
- * @}
- */
-
-/** @defgroup HAL_CORTEX_Aliased_Defines HAL CORTEX Aliased Defines maintained for legacy purpose
- * @{
- */
-#define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig
-/**
- * @}
- */
-
-/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose
- * @{
- */
-
-#define CRC_OUTPUTDATA_INVERSION_DISABLED CRC_OUTPUTDATA_INVERSION_DISABLE
-#define CRC_OUTPUTDATA_INVERSION_ENABLED CRC_OUTPUTDATA_INVERSION_ENABLE
-
-/**
- * @}
- */
-
-/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose
- * @{
- */
-
-#define DAC1_CHANNEL_1 DAC_CHANNEL_1
-#define DAC1_CHANNEL_2 DAC_CHANNEL_2
-#define DAC2_CHANNEL_1 DAC_CHANNEL_1
-#define DAC_WAVE_NONE ((uint32_t)0x00000000U)
-#define DAC_WAVE_NOISE ((uint32_t)DAC_CR_WAVE1_0)
-#define DAC_WAVE_TRIANGLE ((uint32_t)DAC_CR_WAVE1_1)
-#define DAC_WAVEGENERATION_NONE DAC_WAVE_NONE
-#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE
-#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE
-
-/**
- * @}
- */
-
-/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose
- * @{
- */
-#define HAL_REMAPDMA_ADC_DMA_CH2 DMA_REMAP_ADC_DMA_CH2
-#define HAL_REMAPDMA_USART1_TX_DMA_CH4 DMA_REMAP_USART1_TX_DMA_CH4
-#define HAL_REMAPDMA_USART1_RX_DMA_CH5 DMA_REMAP_USART1_RX_DMA_CH5
-#define HAL_REMAPDMA_TIM16_DMA_CH4 DMA_REMAP_TIM16_DMA_CH4
-#define HAL_REMAPDMA_TIM17_DMA_CH2 DMA_REMAP_TIM17_DMA_CH2
-#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32
-#define HAL_REMAPDMA_TIM16_DMA_CH6 DMA_REMAP_TIM16_DMA_CH6
-#define HAL_REMAPDMA_TIM17_DMA_CH7 DMA_REMAP_TIM17_DMA_CH7
-#define HAL_REMAPDMA_SPI2_DMA_CH67 DMA_REMAP_SPI2_DMA_CH67
-#define HAL_REMAPDMA_USART2_DMA_CH67 DMA_REMAP_USART2_DMA_CH67
-#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32
-#define HAL_REMAPDMA_I2C1_DMA_CH76 DMA_REMAP_I2C1_DMA_CH76
-#define HAL_REMAPDMA_TIM1_DMA_CH6 DMA_REMAP_TIM1_DMA_CH6
-#define HAL_REMAPDMA_TIM2_DMA_CH7 DMA_REMAP_TIM2_DMA_CH7
-#define HAL_REMAPDMA_TIM3_DMA_CH6 DMA_REMAP_TIM3_DMA_CH6
-
-#define IS_HAL_REMAPDMA IS_DMA_REMAP
-#define __HAL_REMAPDMA_CHANNEL_ENABLE __HAL_DMA_REMAP_CHANNEL_ENABLE
-#define __HAL_REMAPDMA_CHANNEL_DISABLE __HAL_DMA_REMAP_CHANNEL_DISABLE
-
-
-
-/**
- * @}
- */
-
-/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose
- * @{
- */
-
-#define TYPEPROGRAM_BYTE FLASH_TYPEPROGRAM_BYTE
-#define TYPEPROGRAM_HALFWORD FLASH_TYPEPROGRAM_HALFWORD
-#define TYPEPROGRAM_WORD FLASH_TYPEPROGRAM_WORD
-#define TYPEPROGRAM_DOUBLEWORD FLASH_TYPEPROGRAM_DOUBLEWORD
-#define TYPEERASE_SECTORS FLASH_TYPEERASE_SECTORS
-#define TYPEERASE_PAGES FLASH_TYPEERASE_PAGES
-#define TYPEERASE_PAGEERASE FLASH_TYPEERASE_PAGES
-#define TYPEERASE_MASSERASE FLASH_TYPEERASE_MASSERASE
-#define WRPSTATE_DISABLE OB_WRPSTATE_DISABLE
-#define WRPSTATE_ENABLE OB_WRPSTATE_ENABLE
-#define HAL_FLASH_TIMEOUT_VALUE FLASH_TIMEOUT_VALUE
-#define OBEX_PCROP OPTIONBYTE_PCROP
-#define OBEX_BOOTCONFIG OPTIONBYTE_BOOTCONFIG
-#define PCROPSTATE_DISABLE OB_PCROP_STATE_DISABLE
-#define PCROPSTATE_ENABLE OB_PCROP_STATE_ENABLE
-#define TYPEERASEDATA_BYTE FLASH_TYPEERASEDATA_BYTE
-#define TYPEERASEDATA_HALFWORD FLASH_TYPEERASEDATA_HALFWORD
-#define TYPEERASEDATA_WORD FLASH_TYPEERASEDATA_WORD
-#define TYPEPROGRAMDATA_BYTE FLASH_TYPEPROGRAMDATA_BYTE
-#define TYPEPROGRAMDATA_HALFWORD FLASH_TYPEPROGRAMDATA_HALFWORD
-#define TYPEPROGRAMDATA_WORD FLASH_TYPEPROGRAMDATA_WORD
-#define TYPEPROGRAMDATA_FASTBYTE FLASH_TYPEPROGRAMDATA_FASTBYTE
-#define TYPEPROGRAMDATA_FASTHALFWORD FLASH_TYPEPROGRAMDATA_FASTHALFWORD
-#define TYPEPROGRAMDATA_FASTWORD FLASH_TYPEPROGRAMDATA_FASTWORD
-#define PAGESIZE FLASH_PAGE_SIZE
-#define TYPEPROGRAM_FASTBYTE FLASH_TYPEPROGRAM_BYTE
-#define TYPEPROGRAM_FASTHALFWORD FLASH_TYPEPROGRAM_HALFWORD
-#define TYPEPROGRAM_FASTWORD FLASH_TYPEPROGRAM_WORD
-#define VOLTAGE_RANGE_1 FLASH_VOLTAGE_RANGE_1
-#define VOLTAGE_RANGE_2 FLASH_VOLTAGE_RANGE_2
-#define VOLTAGE_RANGE_3 FLASH_VOLTAGE_RANGE_3
-#define VOLTAGE_RANGE_4 FLASH_VOLTAGE_RANGE_4
-#define TYPEPROGRAM_FAST FLASH_TYPEPROGRAM_FAST
-#define TYPEPROGRAM_FAST_AND_LAST FLASH_TYPEPROGRAM_FAST_AND_LAST
-#define WRPAREA_BANK1_AREAA OB_WRPAREA_BANK1_AREAA
-#define WRPAREA_BANK1_AREAB OB_WRPAREA_BANK1_AREAB
-#define WRPAREA_BANK2_AREAA OB_WRPAREA_BANK2_AREAA
-#define WRPAREA_BANK2_AREAB OB_WRPAREA_BANK2_AREAB
-#define IWDG_STDBY_FREEZE OB_IWDG_STDBY_FREEZE
-#define IWDG_STDBY_ACTIVE OB_IWDG_STDBY_RUN
-#define IWDG_STOP_FREEZE OB_IWDG_STOP_FREEZE
-#define IWDG_STOP_ACTIVE OB_IWDG_STOP_RUN
-#define FLASH_ERROR_NONE HAL_FLASH_ERROR_NONE
-#define FLASH_ERROR_RD HAL_FLASH_ERROR_RD
-#define FLASH_ERROR_PG HAL_FLASH_ERROR_PROG
-#define FLASH_ERROR_PGP HAL_FLASH_ERROR_PGS
-#define FLASH_ERROR_WRP HAL_FLASH_ERROR_WRP
-#define FLASH_ERROR_OPTV HAL_FLASH_ERROR_OPTV
-#define FLASH_ERROR_OPTVUSR HAL_FLASH_ERROR_OPTVUSR
-#define FLASH_ERROR_PROG HAL_FLASH_ERROR_PROG
-#define FLASH_ERROR_OP HAL_FLASH_ERROR_OPERATION
-#define FLASH_ERROR_PGA HAL_FLASH_ERROR_PGA
-#define FLASH_ERROR_SIZE HAL_FLASH_ERROR_SIZE
-#define FLASH_ERROR_SIZ HAL_FLASH_ERROR_SIZE
-#define FLASH_ERROR_PGS HAL_FLASH_ERROR_PGS
-#define FLASH_ERROR_MIS HAL_FLASH_ERROR_MIS
-#define FLASH_ERROR_FAST HAL_FLASH_ERROR_FAST
-#define FLASH_ERROR_FWWERR HAL_FLASH_ERROR_FWWERR
-#define FLASH_ERROR_NOTZERO HAL_FLASH_ERROR_NOTZERO
-#define FLASH_ERROR_OPERATION HAL_FLASH_ERROR_OPERATION
-#define FLASH_ERROR_ERS HAL_FLASH_ERROR_ERS
-#define OB_WDG_SW OB_IWDG_SW
-#define OB_WDG_HW OB_IWDG_HW
-#define OB_SDADC12_VDD_MONITOR_SET OB_SDACD_VDD_MONITOR_SET
-#define OB_SDADC12_VDD_MONITOR_RESET OB_SDACD_VDD_MONITOR_RESET
-#define OB_RAM_PARITY_CHECK_SET OB_SRAM_PARITY_SET
-#define OB_RAM_PARITY_CHECK_RESET OB_SRAM_PARITY_RESET
-#define IS_OB_SDADC12_VDD_MONITOR IS_OB_SDACD_VDD_MONITOR
-#define OB_RDP_LEVEL0 OB_RDP_LEVEL_0
-#define OB_RDP_LEVEL1 OB_RDP_LEVEL_1
-#define OB_RDP_LEVEL2 OB_RDP_LEVEL_2
-/**
- * @}
- */
-
-/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose
- * @{
- */
-
-#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 I2C_FASTMODEPLUS_PA9
-#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 I2C_FASTMODEPLUS_PA10
-#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 I2C_FASTMODEPLUS_PB6
-#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 I2C_FASTMODEPLUS_PB7
-#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 I2C_FASTMODEPLUS_PB8
-#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 I2C_FASTMODEPLUS_PB9
-#define HAL_SYSCFG_FASTMODEPLUS_I2C1 I2C_FASTMODEPLUS_I2C1
-#define HAL_SYSCFG_FASTMODEPLUS_I2C2 I2C_FASTMODEPLUS_I2C2
-#define HAL_SYSCFG_FASTMODEPLUS_I2C3 I2C_FASTMODEPLUS_I2C3
-/**
- * @}
- */
-
-
-/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose
- * @{
- */
-#if defined(STM32L4) || defined(STM32F7)
-#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE FMC_NAND_WAIT_FEATURE_DISABLE
-#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE FMC_NAND_WAIT_FEATURE_ENABLE
-#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 FMC_NAND_MEM_BUS_WIDTH_8
-#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 FMC_NAND_MEM_BUS_WIDTH_16
-#else
-#define FMC_NAND_WAIT_FEATURE_DISABLE FMC_NAND_PCC_WAIT_FEATURE_DISABLE
-#define FMC_NAND_WAIT_FEATURE_ENABLE FMC_NAND_PCC_WAIT_FEATURE_ENABLE
-#define FMC_NAND_MEM_BUS_WIDTH_8 FMC_NAND_PCC_MEM_BUS_WIDTH_8
-#define FMC_NAND_MEM_BUS_WIDTH_16 FMC_NAND_PCC_MEM_BUS_WIDTH_16
-#endif
-/**
- * @}
- */
-
-/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose
- * @{
- */
-
-#define FSMC_NORSRAM_TYPEDEF FSMC_NORSRAM_TypeDef
-#define FSMC_NORSRAM_EXTENDED_TYPEDEF FSMC_NORSRAM_EXTENDED_TypeDef
-/**
- * @}
- */
-
-/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose
- * @{
- */
-#define GET_GPIO_SOURCE GPIO_GET_INDEX
-#define GET_GPIO_INDEX GPIO_GET_INDEX
-
-#if defined(STM32F4)
-#define GPIO_AF12_SDMMC GPIO_AF12_SDIO
-#define GPIO_AF12_SDMMC1 GPIO_AF12_SDIO
-#endif
-
-#if defined(STM32F7)
-#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1
-#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1
-#endif
-
-#if defined(STM32L4)
-#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1
-#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1
-#endif
-
-#define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1
-#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1
-#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1
-
-#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7)
-#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW
-#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
-#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH
-#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH
-#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 */
-
-#if defined(STM32L1)
- #define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW
- #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM
- #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH
- #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH
-#endif /* STM32L1 */
-
-#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1)
- #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW
- #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
- #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH
-#endif /* STM32F0 || STM32F3 || STM32F1 */
-
-#define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1
-/**
- * @}
- */
-
-/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose
- * @{
- */
-#define HRTIM_TIMDELAYEDPROTECTION_DISABLED HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED
-#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6
-#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6
-#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6
-#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6
-#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7
-#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7
-#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7
-#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7
-
-#define __HAL_HRTIM_SetCounter __HAL_HRTIM_SETCOUNTER
-#define __HAL_HRTIM_GetCounter __HAL_HRTIM_GETCOUNTER
-#define __HAL_HRTIM_SetPeriod __HAL_HRTIM_SETPERIOD
-#define __HAL_HRTIM_GetPeriod __HAL_HRTIM_GETPERIOD
-#define __HAL_HRTIM_SetClockPrescaler __HAL_HRTIM_SETCLOCKPRESCALER
-#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER
-#define __HAL_HRTIM_SetCompare __HAL_HRTIM_SETCOMPARE
-#define __HAL_HRTIM_GetCompare __HAL_HRTIM_GETCOMPARE
-/**
- * @}
- */
-
-/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose
- * @{
- */
-#define I2C_DUALADDRESS_DISABLED I2C_DUALADDRESS_DISABLE
-#define I2C_DUALADDRESS_ENABLED I2C_DUALADDRESS_ENABLE
-#define I2C_GENERALCALL_DISABLED I2C_GENERALCALL_DISABLE
-#define I2C_GENERALCALL_ENABLED I2C_GENERALCALL_ENABLE
-#define I2C_NOSTRETCH_DISABLED I2C_NOSTRETCH_DISABLE
-#define I2C_NOSTRETCH_ENABLED I2C_NOSTRETCH_ENABLE
-#define I2C_ANALOGFILTER_ENABLED I2C_ANALOGFILTER_ENABLE
-#define I2C_ANALOGFILTER_DISABLED I2C_ANALOGFILTER_DISABLE
-#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || defined(STM32L1) || defined(STM32F7)
-#define HAL_I2C_STATE_MEM_BUSY_TX HAL_I2C_STATE_BUSY_TX
-#define HAL_I2C_STATE_MEM_BUSY_RX HAL_I2C_STATE_BUSY_RX
-#define HAL_I2C_STATE_MASTER_BUSY_TX HAL_I2C_STATE_BUSY_TX
-#define HAL_I2C_STATE_MASTER_BUSY_RX HAL_I2C_STATE_BUSY_RX
-#define HAL_I2C_STATE_SLAVE_BUSY_TX HAL_I2C_STATE_BUSY_TX
-#define HAL_I2C_STATE_SLAVE_BUSY_RX HAL_I2C_STATE_BUSY_RX
-#endif
-/**
- * @}
- */
-
-/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose
- * @{
- */
-#define IRDA_ONE_BIT_SAMPLE_DISABLED IRDA_ONE_BIT_SAMPLE_DISABLE
-#define IRDA_ONE_BIT_SAMPLE_ENABLED IRDA_ONE_BIT_SAMPLE_ENABLE
-
-/**
- * @}
- */
-
-/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose
- * @{
- */
-#define KR_KEY_RELOAD IWDG_KEY_RELOAD
-#define KR_KEY_ENABLE IWDG_KEY_ENABLE
-#define KR_KEY_EWA IWDG_KEY_WRITE_ACCESS_ENABLE
-#define KR_KEY_DWA IWDG_KEY_WRITE_ACCESS_DISABLE
-/**
- * @}
- */
-
-/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose
- * @{
- */
-
-#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION
-#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS LPTIM_CLOCKSAMPLETIME_2TRANSITIONS
-#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS LPTIM_CLOCKSAMPLETIME_4TRANSITIONS
-#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS LPTIM_CLOCKSAMPLETIME_8TRANSITIONS
-
-#define LPTIM_CLOCKPOLARITY_RISINGEDGE LPTIM_CLOCKPOLARITY_RISING
-#define LPTIM_CLOCKPOLARITY_FALLINGEDGE LPTIM_CLOCKPOLARITY_FALLING
-#define LPTIM_CLOCKPOLARITY_BOTHEDGES LPTIM_CLOCKPOLARITY_RISING_FALLING
-
-#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION
-#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS LPTIM_TRIGSAMPLETIME_2TRANSITIONS
-#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS LPTIM_TRIGSAMPLETIME_4TRANSITIONS
-#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS LPTIM_TRIGSAMPLETIME_8TRANSITIONS
-
-/* The following 3 definition have also been present in a temporary version of lptim.h */
-/* They need to be renamed also to the right name, just in case */
-#define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS
-#define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS
-#define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS
-
-/**
- * @}
- */
-
-/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose
- * @{
- */
-#define HAL_NAND_Read_Page HAL_NAND_Read_Page_8b
-#define HAL_NAND_Write_Page HAL_NAND_Write_Page_8b
-#define HAL_NAND_Read_SpareArea HAL_NAND_Read_SpareArea_8b
-#define HAL_NAND_Write_SpareArea HAL_NAND_Write_SpareArea_8b
-
-#define NAND_AddressTypedef NAND_AddressTypeDef
-
-#define __ARRAY_ADDRESS ARRAY_ADDRESS
-#define __ADDR_1st_CYCLE ADDR_1ST_CYCLE
-#define __ADDR_2nd_CYCLE ADDR_2ND_CYCLE
-#define __ADDR_3rd_CYCLE ADDR_3RD_CYCLE
-#define __ADDR_4th_CYCLE ADDR_4TH_CYCLE
-/**
- * @}
- */
-
-/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose
- * @{
- */
-#define NOR_StatusTypedef HAL_NOR_StatusTypeDef
-#define NOR_SUCCESS HAL_NOR_STATUS_SUCCESS
-#define NOR_ONGOING HAL_NOR_STATUS_ONGOING
-#define NOR_ERROR HAL_NOR_STATUS_ERROR
-#define NOR_TIMEOUT HAL_NOR_STATUS_TIMEOUT
-
-#define __NOR_WRITE NOR_WRITE
-#define __NOR_ADDR_SHIFT NOR_ADDR_SHIFT
-/**
- * @}
- */
-
-/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose
- * @{
- */
-
-#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_NONINVERTINGINPUT_IO0
-#define OPAMP_NONINVERTINGINPUT_VP1 OPAMP_NONINVERTINGINPUT_IO1
-#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_NONINVERTINGINPUT_IO2
-#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_NONINVERTINGINPUT_IO3
-
-#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_SEC_NONINVERTINGINPUT_IO0
-#define OPAMP_SEC_NONINVERTINGINPUT_VP1 OPAMP_SEC_NONINVERTINGINPUT_IO1
-#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_SEC_NONINVERTINGINPUT_IO2
-#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_SEC_NONINVERTINGINPUT_IO3
-
-#define OPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0
-#define OPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1
-
-#define IOPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0
-#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1
-
-#define OPAMP_SEC_INVERTINGINPUT_VM0 OPAMP_SEC_INVERTINGINPUT_IO0
-#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_SEC_INVERTINGINPUT_IO1
-
-#define OPAMP_INVERTINGINPUT_VINM OPAMP_SEC_INVERTINGINPUT_IO1
-
-#define OPAMP_PGACONNECT_NO OPAMP_PGA_CONNECT_INVERTINGINPUT_NO
-#define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0
-#define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1
-
-/**
- * @}
- */
-
-/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose
- * @{
- */
-#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS
-#if defined(STM32F7)
- #define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL
-#endif
-/**
- * @}
- */
-
-/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose
- * @{
- */
-
-/* Compact Flash-ATA registers description */
-#define CF_DATA ATA_DATA
-#define CF_SECTOR_COUNT ATA_SECTOR_COUNT
-#define CF_SECTOR_NUMBER ATA_SECTOR_NUMBER
-#define CF_CYLINDER_LOW ATA_CYLINDER_LOW
-#define CF_CYLINDER_HIGH ATA_CYLINDER_HIGH
-#define CF_CARD_HEAD ATA_CARD_HEAD
-#define CF_STATUS_CMD ATA_STATUS_CMD
-#define CF_STATUS_CMD_ALTERNATE ATA_STATUS_CMD_ALTERNATE
-#define CF_COMMON_DATA_AREA ATA_COMMON_DATA_AREA
-
-/* Compact Flash-ATA commands */
-#define CF_READ_SECTOR_CMD ATA_READ_SECTOR_CMD
-#define CF_WRITE_SECTOR_CMD ATA_WRITE_SECTOR_CMD
-#define CF_ERASE_SECTOR_CMD ATA_ERASE_SECTOR_CMD
-#define CF_IDENTIFY_CMD ATA_IDENTIFY_CMD
-
-#define PCCARD_StatusTypedef HAL_PCCARD_StatusTypeDef
-#define PCCARD_SUCCESS HAL_PCCARD_STATUS_SUCCESS
-#define PCCARD_ONGOING HAL_PCCARD_STATUS_ONGOING
-#define PCCARD_ERROR HAL_PCCARD_STATUS_ERROR
-#define PCCARD_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT
-/**
- * @}
- */
-
-/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose
- * @{
- */
-
-#define FORMAT_BIN RTC_FORMAT_BIN
-#define FORMAT_BCD RTC_FORMAT_BCD
-
-#define RTC_ALARMSUBSECONDMASK_None RTC_ALARMSUBSECONDMASK_NONE
-#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE
-#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE
-#define RTC_TAMPERMASK_FLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
-#define RTC_TAMPERMASK_FLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
-
-#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
-#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
-#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE
-#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE
-#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
-#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
-#define RTC_TAMPER1_2_INTERRUPT RTC_ALL_TAMPER_INTERRUPT
-#define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT
-
-#define RTC_TIMESTAMPPIN_PC13 RTC_TIMESTAMPPIN_DEFAULT
-#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1
-#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1
-#define RTC_TIMESTAMPPIN_PC1 RTC_TIMESTAMPPIN_POS2
-
-#define RTC_OUTPUT_REMAP_PC13 RTC_OUTPUT_REMAP_NONE
-#define RTC_OUTPUT_REMAP_PB14 RTC_OUTPUT_REMAP_POS1
-#define RTC_OUTPUT_REMAP_PB2 RTC_OUTPUT_REMAP_POS1
-
-#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT
-#define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1
-#define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1
-
-/**
- * @}
- */
-
-
-/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose
- * @{
- */
-#define SMARTCARD_NACK_ENABLED SMARTCARD_NACK_ENABLE
-#define SMARTCARD_NACK_DISABLED SMARTCARD_NACK_DISABLE
-
-#define SMARTCARD_ONEBIT_SAMPLING_DISABLED SMARTCARD_ONE_BIT_SAMPLE_DISABLE
-#define SMARTCARD_ONEBIT_SAMPLING_ENABLED SMARTCARD_ONE_BIT_SAMPLE_ENABLE
-#define SMARTCARD_ONEBIT_SAMPLING_DISABLE SMARTCARD_ONE_BIT_SAMPLE_DISABLE
-#define SMARTCARD_ONEBIT_SAMPLING_ENABLE SMARTCARD_ONE_BIT_SAMPLE_ENABLE
-
-#define SMARTCARD_TIMEOUT_DISABLED SMARTCARD_TIMEOUT_DISABLE
-#define SMARTCARD_TIMEOUT_ENABLED SMARTCARD_TIMEOUT_ENABLE
-
-#define SMARTCARD_LASTBIT_DISABLED SMARTCARD_LASTBIT_DISABLE
-#define SMARTCARD_LASTBIT_ENABLED SMARTCARD_LASTBIT_ENABLE
-/**
- * @}
- */
-
-
-/** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose
- * @{
- */
-#define SMBUS_DUALADDRESS_DISABLED SMBUS_DUALADDRESS_DISABLE
-#define SMBUS_DUALADDRESS_ENABLED SMBUS_DUALADDRESS_ENABLE
-#define SMBUS_GENERALCALL_DISABLED SMBUS_GENERALCALL_DISABLE
-#define SMBUS_GENERALCALL_ENABLED SMBUS_GENERALCALL_ENABLE
-#define SMBUS_NOSTRETCH_DISABLED SMBUS_NOSTRETCH_DISABLE
-#define SMBUS_NOSTRETCH_ENABLED SMBUS_NOSTRETCH_ENABLE
-#define SMBUS_ANALOGFILTER_ENABLED SMBUS_ANALOGFILTER_ENABLE
-#define SMBUS_ANALOGFILTER_DISABLED SMBUS_ANALOGFILTER_DISABLE
-#define SMBUS_PEC_DISABLED SMBUS_PEC_DISABLE
-#define SMBUS_PEC_ENABLED SMBUS_PEC_ENABLE
-#define HAL_SMBUS_STATE_SLAVE_LISTEN HAL_SMBUS_STATE_LISTEN
-/**
- * @}
- */
-
-/** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose
- * @{
- */
-#define SPI_TIMODE_DISABLED SPI_TIMODE_DISABLE
-#define SPI_TIMODE_ENABLED SPI_TIMODE_ENABLE
-
-#define SPI_CRCCALCULATION_DISABLED SPI_CRCCALCULATION_DISABLE
-#define SPI_CRCCALCULATION_ENABLED SPI_CRCCALCULATION_ENABLE
-
-#define SPI_NSS_PULSE_DISABLED SPI_NSS_PULSE_DISABLE
-#define SPI_NSS_PULSE_ENABLED SPI_NSS_PULSE_ENABLE
-
-/**
- * @}
- */
-
-/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose
- * @{
- */
-#define CCER_CCxE_MASK TIM_CCER_CCxE_MASK
-#define CCER_CCxNE_MASK TIM_CCER_CCxNE_MASK
-
-#define TIM_DMABase_CR1 TIM_DMABASE_CR1
-#define TIM_DMABase_CR2 TIM_DMABASE_CR2
-#define TIM_DMABase_SMCR TIM_DMABASE_SMCR
-#define TIM_DMABase_DIER TIM_DMABASE_DIER
-#define TIM_DMABase_SR TIM_DMABASE_SR
-#define TIM_DMABase_EGR TIM_DMABASE_EGR
-#define TIM_DMABase_CCMR1 TIM_DMABASE_CCMR1
-#define TIM_DMABase_CCMR2 TIM_DMABASE_CCMR2
-#define TIM_DMABase_CCER TIM_DMABASE_CCER
-#define TIM_DMABase_CNT TIM_DMABASE_CNT
-#define TIM_DMABase_PSC TIM_DMABASE_PSC
-#define TIM_DMABase_ARR TIM_DMABASE_ARR
-#define TIM_DMABase_RCR TIM_DMABASE_RCR
-#define TIM_DMABase_CCR1 TIM_DMABASE_CCR1
-#define TIM_DMABase_CCR2 TIM_DMABASE_CCR2
-#define TIM_DMABase_CCR3 TIM_DMABASE_CCR3
-#define TIM_DMABase_CCR4 TIM_DMABASE_CCR4
-#define TIM_DMABase_BDTR TIM_DMABASE_BDTR
-#define TIM_DMABase_DCR TIM_DMABASE_DCR
-#define TIM_DMABase_DMAR TIM_DMABASE_DMAR
-#define TIM_DMABase_OR1 TIM_DMABASE_OR1
-#define TIM_DMABase_CCMR3 TIM_DMABASE_CCMR3
-#define TIM_DMABase_CCR5 TIM_DMABASE_CCR5
-#define TIM_DMABase_CCR6 TIM_DMABASE_CCR6
-#define TIM_DMABase_OR2 TIM_DMABASE_OR2
-#define TIM_DMABase_OR3 TIM_DMABASE_OR3
-#define TIM_DMABase_OR TIM_DMABASE_OR
-
-#define TIM_EventSource_Update TIM_EVENTSOURCE_UPDATE
-#define TIM_EventSource_CC1 TIM_EVENTSOURCE_CC1
-#define TIM_EventSource_CC2 TIM_EVENTSOURCE_CC2
-#define TIM_EventSource_CC3 TIM_EVENTSOURCE_CC3
-#define TIM_EventSource_CC4 TIM_EVENTSOURCE_CC4
-#define TIM_EventSource_COM TIM_EVENTSOURCE_COM
-#define TIM_EventSource_Trigger TIM_EVENTSOURCE_TRIGGER
-#define TIM_EventSource_Break TIM_EVENTSOURCE_BREAK
-#define TIM_EventSource_Break2 TIM_EVENTSOURCE_BREAK2
-
-#define TIM_DMABurstLength_1Transfer TIM_DMABURSTLENGTH_1TRANSFER
-#define TIM_DMABurstLength_2Transfers TIM_DMABURSTLENGTH_2TRANSFERS
-#define TIM_DMABurstLength_3Transfers TIM_DMABURSTLENGTH_3TRANSFERS
-#define TIM_DMABurstLength_4Transfers TIM_DMABURSTLENGTH_4TRANSFERS
-#define TIM_DMABurstLength_5Transfers TIM_DMABURSTLENGTH_5TRANSFERS
-#define TIM_DMABurstLength_6Transfers TIM_DMABURSTLENGTH_6TRANSFERS
-#define TIM_DMABurstLength_7Transfers TIM_DMABURSTLENGTH_7TRANSFERS
-#define TIM_DMABurstLength_8Transfers TIM_DMABURSTLENGTH_8TRANSFERS
-#define TIM_DMABurstLength_9Transfers TIM_DMABURSTLENGTH_9TRANSFERS
-#define TIM_DMABurstLength_10Transfers TIM_DMABURSTLENGTH_10TRANSFERS
-#define TIM_DMABurstLength_11Transfers TIM_DMABURSTLENGTH_11TRANSFERS
-#define TIM_DMABurstLength_12Transfers TIM_DMABURSTLENGTH_12TRANSFERS
-#define TIM_DMABurstLength_13Transfers TIM_DMABURSTLENGTH_13TRANSFERS
-#define TIM_DMABurstLength_14Transfers TIM_DMABURSTLENGTH_14TRANSFERS
-#define TIM_DMABurstLength_15Transfers TIM_DMABURSTLENGTH_15TRANSFERS
-#define TIM_DMABurstLength_16Transfers TIM_DMABURSTLENGTH_16TRANSFERS
-#define TIM_DMABurstLength_17Transfers TIM_DMABURSTLENGTH_17TRANSFERS
-#define TIM_DMABurstLength_18Transfers TIM_DMABURSTLENGTH_18TRANSFERS
-
-/**
- * @}
- */
-
-/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose
- * @{
- */
-#define TSC_SYNC_POL_FALL TSC_SYNC_POLARITY_FALLING
-#define TSC_SYNC_POL_RISE_HIGH TSC_SYNC_POLARITY_RISING
-/**
- * @}
- */
-
-/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose
- * @{
- */
-#define UART_ONEBIT_SAMPLING_DISABLED UART_ONE_BIT_SAMPLE_DISABLE
-#define UART_ONEBIT_SAMPLING_ENABLED UART_ONE_BIT_SAMPLE_ENABLE
-#define UART_ONE_BIT_SAMPLE_DISABLED UART_ONE_BIT_SAMPLE_DISABLE
-#define UART_ONE_BIT_SAMPLE_ENABLED UART_ONE_BIT_SAMPLE_ENABLE
-
-#define __HAL_UART_ONEBIT_ENABLE __HAL_UART_ONE_BIT_SAMPLE_ENABLE
-#define __HAL_UART_ONEBIT_DISABLE __HAL_UART_ONE_BIT_SAMPLE_DISABLE
-
-#define __DIV_SAMPLING16 UART_DIV_SAMPLING16
-#define __DIVMANT_SAMPLING16 UART_DIVMANT_SAMPLING16
-#define __DIVFRAQ_SAMPLING16 UART_DIVFRAQ_SAMPLING16
-#define __UART_BRR_SAMPLING16 UART_BRR_SAMPLING16
-
-#define __DIV_SAMPLING8 UART_DIV_SAMPLING8
-#define __DIVMANT_SAMPLING8 UART_DIVMANT_SAMPLING8
-#define __DIVFRAQ_SAMPLING8 UART_DIVFRAQ_SAMPLING8
-#define __UART_BRR_SAMPLING8 UART_BRR_SAMPLING8
-
-#define UART_WAKEUPMETHODE_IDLELINE UART_WAKEUPMETHOD_IDLELINE
-#define UART_WAKEUPMETHODE_ADDRESSMARK UART_WAKEUPMETHOD_ADDRESSMARK
-
-/**
- * @}
- */
-
-
-/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose
- * @{
- */
-
-#define USART_CLOCK_DISABLED USART_CLOCK_DISABLE
-#define USART_CLOCK_ENABLED USART_CLOCK_ENABLE
-
-#define USARTNACK_ENABLED USART_NACK_ENABLE
-#define USARTNACK_DISABLED USART_NACK_DISABLE
-/**
- * @}
- */
-
-/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose
- * @{
- */
-#define CFR_BASE WWDG_CFR_BASE
-
-/**
- * @}
- */
-
-/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose
- * @{
- */
-#define CAN_FilterFIFO0 CAN_FILTER_FIFO0
-#define CAN_FilterFIFO1 CAN_FILTER_FIFO1
-#define CAN_IT_RQCP0 CAN_IT_TME
-#define CAN_IT_RQCP1 CAN_IT_TME
-#define CAN_IT_RQCP2 CAN_IT_TME
-#define INAK_TIMEOUT CAN_TIMEOUT_VALUE
-#define SLAK_TIMEOUT CAN_TIMEOUT_VALUE
-#define CAN_TXSTATUS_FAILED ((uint8_t)0x00U)
-#define CAN_TXSTATUS_OK ((uint8_t)0x01U)
-#define CAN_TXSTATUS_PENDING ((uint8_t)0x02U)
-
-/**
- * @}
- */
-
-/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose
- * @{
- */
-
-#define VLAN_TAG ETH_VLAN_TAG
-#define MIN_ETH_PAYLOAD ETH_MIN_ETH_PAYLOAD
-#define MAX_ETH_PAYLOAD ETH_MAX_ETH_PAYLOAD
-#define JUMBO_FRAME_PAYLOAD ETH_JUMBO_FRAME_PAYLOAD
-#define MACMIIAR_CR_MASK ETH_MACMIIAR_CR_MASK
-#define MACCR_CLEAR_MASK ETH_MACCR_CLEAR_MASK
-#define MACFCR_CLEAR_MASK ETH_MACFCR_CLEAR_MASK
-#define DMAOMR_CLEAR_MASK ETH_DMAOMR_CLEAR_MASK
-
-#define ETH_MMCCR ((uint32_t)0x00000100U)
-#define ETH_MMCRIR ((uint32_t)0x00000104U)
-#define ETH_MMCTIR ((uint32_t)0x00000108U)
-#define ETH_MMCRIMR ((uint32_t)0x0000010CU)
-#define ETH_MMCTIMR ((uint32_t)0x00000110U)
-#define ETH_MMCTGFSCCR ((uint32_t)0x0000014CU)
-#define ETH_MMCTGFMSCCR ((uint32_t)0x00000150U)
-#define ETH_MMCTGFCR ((uint32_t)0x00000168U)
-#define ETH_MMCRFCECR ((uint32_t)0x00000194U)
-#define ETH_MMCRFAECR ((uint32_t)0x00000198U)
-#define ETH_MMCRGUFCR ((uint32_t)0x000001C4U)
-
-#define ETH_MAC_TXFIFO_FULL ((uint32_t)0x02000000) /* Tx FIFO full */
-#define ETH_MAC_TXFIFONOT_EMPTY ((uint32_t)0x01000000) /* Tx FIFO not empty */
-#define ETH_MAC_TXFIFO_WRITE_ACTIVE ((uint32_t)0x00400000) /* Tx FIFO write active */
-#define ETH_MAC_TXFIFO_IDLE ((uint32_t)0x00000000) /* Tx FIFO read status: Idle */
-#define ETH_MAC_TXFIFO_READ ((uint32_t)0x00100000) /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */
-#define ETH_MAC_TXFIFO_WAITING ((uint32_t)0x00200000) /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */
-#define ETH_MAC_TXFIFO_WRITING ((uint32_t)0x00300000) /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */
-#define ETH_MAC_TRANSMISSION_PAUSE ((uint32_t)0x00080000) /* MAC transmitter in pause */
-#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE ((uint32_t)0x00000000) /* MAC transmit frame controller: Idle */
-#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING ((uint32_t)0x00020000) /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */
-#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF ((uint32_t)0x00040000) /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */
-#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING ((uint32_t)0x00060000) /* MAC transmit frame controller: Transferring input frame for transmission */
-#define ETH_MAC_MII_TRANSMIT_ACTIVE ((uint32_t)0x00010000) /* MAC MII transmit engine active */
-#define ETH_MAC_RXFIFO_EMPTY ((uint32_t)0x00000000) /* Rx FIFO fill level: empty */
-#define ETH_MAC_RXFIFO_BELOW_THRESHOLD ((uint32_t)0x00000100) /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */
-#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD ((uint32_t)0x00000200) /* Rx FIFO fill level: fill-level above flow-control activate threshold */
-#define ETH_MAC_RXFIFO_FULL ((uint32_t)0x00000300) /* Rx FIFO fill level: full */
-#if defined(STM32F1)
-#else
-#define ETH_MAC_READCONTROLLER_IDLE ((uint32_t)0x00000000) /* Rx FIFO read controller IDLE state */
-#define ETH_MAC_READCONTROLLER_READING_DATA ((uint32_t)0x00000020) /* Rx FIFO read controller Reading frame data */
-#define ETH_MAC_READCONTROLLER_READING_STATUS ((uint32_t)0x00000040) /* Rx FIFO read controller Reading frame status (or time-stamp) */
-#endif
-#define ETH_MAC_READCONTROLLER_FLUSHING ((uint32_t)0x00000060) /* Rx FIFO read controller Flushing the frame data and status */
-#define ETH_MAC_RXFIFO_WRITE_ACTIVE ((uint32_t)0x00000010) /* Rx FIFO write controller active */
-#define ETH_MAC_SMALL_FIFO_NOTACTIVE ((uint32_t)0x00000000) /* MAC small FIFO read / write controllers not active */
-#define ETH_MAC_SMALL_FIFO_READ_ACTIVE ((uint32_t)0x00000002) /* MAC small FIFO read controller active */
-#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE ((uint32_t)0x00000004) /* MAC small FIFO write controller active */
-#define ETH_MAC_SMALL_FIFO_RW_ACTIVE ((uint32_t)0x00000006) /* MAC small FIFO read / write controllers active */
-#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE ((uint32_t)0x00000001) /* MAC MII receive protocol engine active */
-
-/**
- * @}
- */
-
-/** @defgroup HAL_DCMI_Aliased_Defines HAL DCMI Aliased Defines maintained for legacy purpose
- * @{
- */
-#define HAL_DCMI_ERROR_OVF HAL_DCMI_ERROR_OVR
-#define DCMI_IT_OVF DCMI_IT_OVR
-#define DCMI_FLAG_OVFRI DCMI_FLAG_OVRRI
-#define DCMI_FLAG_OVFMI DCMI_FLAG_OVRMI
-
-#define HAL_DCMI_ConfigCROP HAL_DCMI_ConfigCrop
-#define HAL_DCMI_EnableCROP HAL_DCMI_EnableCrop
-#define HAL_DCMI_DisableCROP HAL_DCMI_DisableCrop
-
-/**
- * @}
- */
-
-#if defined(STM32L4xx) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) ||\
- defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx)
-/** @defgroup HAL_DMA2D_Aliased_Defines HAL DMA2D Aliased Defines maintained for legacy purpose
- * @{
- */
-#define DMA2D_ARGB8888 DMA2D_OUTPUT_ARGB8888
-#define DMA2D_RGB888 DMA2D_OUTPUT_RGB888
-#define DMA2D_RGB565 DMA2D_OUTPUT_RGB565
-#define DMA2D_ARGB1555 DMA2D_OUTPUT_ARGB1555
-#define DMA2D_ARGB4444 DMA2D_OUTPUT_ARGB4444
-
-#define CM_ARGB8888 DMA2D_INPUT_ARGB8888
-#define CM_RGB888 DMA2D_INPUT_RGB888
-#define CM_RGB565 DMA2D_INPUT_RGB565
-#define CM_ARGB1555 DMA2D_INPUT_ARGB1555
-#define CM_ARGB4444 DMA2D_INPUT_ARGB4444
-#define CM_L8 DMA2D_INPUT_L8
-#define CM_AL44 DMA2D_INPUT_AL44
-#define CM_AL88 DMA2D_INPUT_AL88
-#define CM_L4 DMA2D_INPUT_L4
-#define CM_A8 DMA2D_INPUT_A8
-#define CM_A4 DMA2D_INPUT_A4
-/**
- * @}
- */
-#endif /* STM32L4xx || STM32F7*/
-
-/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose
- * @{
- */
-
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-
-/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose
- * @{
- */
-#define HAL_CRYP_ComputationCpltCallback HAL_CRYPEx_ComputationCpltCallback
-/**
- * @}
- */
-
-/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose
- * @{
- */
-#define HAL_HASH_STATETypeDef HAL_HASH_StateTypeDef
-#define HAL_HASHPhaseTypeDef HAL_HASH_PhaseTypeDef
-#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish
-#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish
-#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish
-#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish
-
-/*HASH Algorithm Selection*/
-
-#define HASH_AlgoSelection_SHA1 HASH_ALGOSELECTION_SHA1
-#define HASH_AlgoSelection_SHA224 HASH_ALGOSELECTION_SHA224
-#define HASH_AlgoSelection_SHA256 HASH_ALGOSELECTION_SHA256
-#define HASH_AlgoSelection_MD5 HASH_ALGOSELECTION_MD5
-
-#define HASH_AlgoMode_HASH HASH_ALGOMODE_HASH
-#define HASH_AlgoMode_HMAC HASH_ALGOMODE_HMAC
-
-#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY
-#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY
-/**
- * @}
- */
-
-/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose
- * @{
- */
-#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode
-#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode
-#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode
-#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode
-#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode
-#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode
-#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph))
-#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect
-#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT())
-#if defined(STM32L0)
-#else
-#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT())
-#endif
-#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT())
-#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor())
-/**
- * @}
- */
-
-/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose
- * @{
- */
-#define FLASH_HalfPageProgram HAL_FLASHEx_HalfPageProgram
-#define FLASH_EnableRunPowerDown HAL_FLASHEx_EnableRunPowerDown
-#define FLASH_DisableRunPowerDown HAL_FLASHEx_DisableRunPowerDown
-#define HAL_DATA_EEPROMEx_Unlock HAL_FLASHEx_DATAEEPROM_Unlock
-#define HAL_DATA_EEPROMEx_Lock HAL_FLASHEx_DATAEEPROM_Lock
-#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase
-#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program
-
- /**
- * @}
- */
-
-/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose
- * @{
- */
-#define HAL_I2CEx_AnalogFilter_Config HAL_I2CEx_ConfigAnalogFilter
-#define HAL_I2CEx_DigitalFilter_Config HAL_I2CEx_ConfigDigitalFilter
-#define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter
-#define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter
-
-#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus))
- /**
- * @}
- */
-
-/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose
- * @{
- */
-#define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD
-#define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg
-#define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown
-#define HAL_PWR_DisableVddio2Monitor HAL_PWREx_DisableVddio2Monitor
-#define HAL_PWR_EnableBkUpReg HAL_PWREx_EnableBkUpReg
-#define HAL_PWR_EnableFlashPowerDown HAL_PWREx_EnableFlashPowerDown
-#define HAL_PWR_EnableVddio2Monitor HAL_PWREx_EnableVddio2Monitor
-#define HAL_PWR_PVD_PVM_IRQHandler HAL_PWREx_PVD_PVM_IRQHandler
-#define HAL_PWR_PVDLevelConfig HAL_PWR_ConfigPVD
-#define HAL_PWR_Vddio2Monitor_IRQHandler HAL_PWREx_Vddio2Monitor_IRQHandler
-#define HAL_PWR_Vddio2MonitorCallback HAL_PWREx_Vddio2MonitorCallback
-#define HAL_PWREx_ActivateOverDrive HAL_PWREx_EnableOverDrive
-#define HAL_PWREx_DeactivateOverDrive HAL_PWREx_DisableOverDrive
-#define HAL_PWREx_DisableSDADCAnalog HAL_PWREx_DisableSDADC
-#define HAL_PWREx_EnableSDADCAnalog HAL_PWREx_EnableSDADC
-#define HAL_PWREx_PVMConfig HAL_PWREx_ConfigPVM
-
-#define PWR_MODE_NORMAL PWR_PVD_MODE_NORMAL
-#define PWR_MODE_IT_RISING PWR_PVD_MODE_IT_RISING
-#define PWR_MODE_IT_FALLING PWR_PVD_MODE_IT_FALLING
-#define PWR_MODE_IT_RISING_FALLING PWR_PVD_MODE_IT_RISING_FALLING
-#define PWR_MODE_EVENT_RISING PWR_PVD_MODE_EVENT_RISING
-#define PWR_MODE_EVENT_FALLING PWR_PVD_MODE_EVENT_FALLING
-#define PWR_MODE_EVENT_RISING_FALLING PWR_PVD_MODE_EVENT_RISING_FALLING
-
-#define CR_OFFSET_BB PWR_CR_OFFSET_BB
-#define CSR_OFFSET_BB PWR_CSR_OFFSET_BB
-
-#define DBP_BitNumber DBP_BIT_NUMBER
-#define PVDE_BitNumber PVDE_BIT_NUMBER
-#define PMODE_BitNumber PMODE_BIT_NUMBER
-#define EWUP_BitNumber EWUP_BIT_NUMBER
-#define FPDS_BitNumber FPDS_BIT_NUMBER
-#define ODEN_BitNumber ODEN_BIT_NUMBER
-#define ODSWEN_BitNumber ODSWEN_BIT_NUMBER
-#define MRLVDS_BitNumber MRLVDS_BIT_NUMBER
-#define LPLVDS_BitNumber LPLVDS_BIT_NUMBER
-#define BRE_BitNumber BRE_BIT_NUMBER
-
-#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL
-
- /**
- * @}
- */
-
-/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose
- * @{
- */
-#define HAL_SMBUS_Slave_Listen_IT HAL_SMBUS_EnableListen_IT
-#define HAL_SMBUS_SlaveAddrCallback HAL_SMBUS_AddrCallback
-#define HAL_SMBUS_SlaveListenCpltCallback HAL_SMBUS_ListenCpltCallback
-/**
- * @}
- */
-
-/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose
- * @{
- */
-#define HAL_SPI_FlushRxFifo HAL_SPIEx_FlushRxFifo
-/**
- * @}
- */
-
-/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose
- * @{
- */
-#define HAL_TIM_DMADelayPulseCplt TIM_DMADelayPulseCplt
-#define HAL_TIM_DMAError TIM_DMAError
-#define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt
-#define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt
-/**
- * @}
- */
-
-/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose
- * @{
- */
-#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback
-/**
- * @}
- */
-
-/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose
- * @{
- */
-#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback
-/**
- * @}
- */
-
-
-/** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose
- * @{
- */
-
-/**
- * @}
- */
-
-/* Exported macros ------------------------------------------------------------*/
-
-/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose
- * @{
- */
-#define AES_IT_CC CRYP_IT_CC
-#define AES_IT_ERR CRYP_IT_ERR
-#define AES_FLAG_CCF CRYP_FLAG_CCF
-/**
- * @}
- */
-
-/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose
- * @{
- */
-#define __HAL_GET_BOOT_MODE __HAL_SYSCFG_GET_BOOT_MODE
-#define __HAL_REMAPMEMORY_FLASH __HAL_SYSCFG_REMAPMEMORY_FLASH
-#define __HAL_REMAPMEMORY_SYSTEMFLASH __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH
-#define __HAL_REMAPMEMORY_SRAM __HAL_SYSCFG_REMAPMEMORY_SRAM
-#define __HAL_REMAPMEMORY_FMC __HAL_SYSCFG_REMAPMEMORY_FMC
-#define __HAL_REMAPMEMORY_FMC_SDRAM __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM
-#define __HAL_REMAPMEMORY_FSMC __HAL_SYSCFG_REMAPMEMORY_FSMC
-#define __HAL_REMAPMEMORY_QUADSPI __HAL_SYSCFG_REMAPMEMORY_QUADSPI
-#define __HAL_FMC_BANK __HAL_SYSCFG_FMC_BANK
-#define __HAL_GET_FLAG __HAL_SYSCFG_GET_FLAG
-#define __HAL_CLEAR_FLAG __HAL_SYSCFG_CLEAR_FLAG
-#define __HAL_VREFINT_OUT_ENABLE __HAL_SYSCFG_VREFINT_OUT_ENABLE
-#define __HAL_VREFINT_OUT_DISABLE __HAL_SYSCFG_VREFINT_OUT_DISABLE
-
-#define SYSCFG_FLAG_VREF_READY SYSCFG_FLAG_VREFINT_READY
-#define SYSCFG_FLAG_RC48 RCC_FLAG_HSI48
-#define IS_SYSCFG_FASTMODEPLUS_CONFIG IS_I2C_FASTMODEPLUS
-#define UFB_MODE_BitNumber UFB_MODE_BIT_NUMBER
-#define CMP_PD_BitNumber CMP_PD_BIT_NUMBER
-
-/**
- * @}
- */
-
-
-/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose
- * @{
- */
-#define __ADC_ENABLE __HAL_ADC_ENABLE
-#define __ADC_DISABLE __HAL_ADC_DISABLE
-#define __HAL_ADC_ENABLING_CONDITIONS ADC_ENABLING_CONDITIONS
-#define __HAL_ADC_DISABLING_CONDITIONS ADC_DISABLING_CONDITIONS
-#define __HAL_ADC_IS_ENABLED ADC_IS_ENABLE
-#define __ADC_IS_ENABLED ADC_IS_ENABLE
-#define __HAL_ADC_IS_SOFTWARE_START_REGULAR ADC_IS_SOFTWARE_START_REGULAR
-#define __HAL_ADC_IS_SOFTWARE_START_INJECTED ADC_IS_SOFTWARE_START_INJECTED
-#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED
-#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR ADC_IS_CONVERSION_ONGOING_REGULAR
-#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED ADC_IS_CONVERSION_ONGOING_INJECTED
-#define __HAL_ADC_IS_CONVERSION_ONGOING ADC_IS_CONVERSION_ONGOING
-#define __HAL_ADC_CLEAR_ERRORCODE ADC_CLEAR_ERRORCODE
-
-#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION
-#define __HAL_ADC_JSQR_RK ADC_JSQR_RK
-#define __HAL_ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_SHIFT
-#define __HAL_ADC_CFGR_AWD23CR ADC_CFGR_AWD23CR
-#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION ADC_CFGR_INJECT_AUTO_CONVERSION
-#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE ADC_CFGR_INJECT_CONTEXT_QUEUE
-#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS ADC_CFGR_INJECT_DISCCONTINUOUS
-#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS ADC_CFGR_REG_DISCCONTINUOUS
-#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM ADC_CFGR_DISCONTINUOUS_NUM
-#define __HAL_ADC_CFGR_AUTOWAIT ADC_CFGR_AUTOWAIT
-#define __HAL_ADC_CFGR_CONTINUOUS ADC_CFGR_CONTINUOUS
-#define __HAL_ADC_CFGR_OVERRUN ADC_CFGR_OVERRUN
-#define __HAL_ADC_CFGR_DMACONTREQ ADC_CFGR_DMACONTREQ
-#define __HAL_ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_SET
-#define __HAL_ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_SET
-#define __HAL_ADC_OFR_CHANNEL ADC_OFR_CHANNEL
-#define __HAL_ADC_DIFSEL_CHANNEL ADC_DIFSEL_CHANNEL
-#define __HAL_ADC_CALFACT_DIFF_SET ADC_CALFACT_DIFF_SET
-#define __HAL_ADC_CALFACT_DIFF_GET ADC_CALFACT_DIFF_GET
-#define __HAL_ADC_TRX_HIGHTHRESHOLD ADC_TRX_HIGHTHRESHOLD
-
-#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION ADC_OFFSET_SHIFT_RESOLUTION
-#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION ADC_AWD1THRESHOLD_SHIFT_RESOLUTION
-#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION ADC_AWD23THRESHOLD_SHIFT_RESOLUTION
-#define __HAL_ADC_COMMON_REGISTER ADC_COMMON_REGISTER
-#define __HAL_ADC_COMMON_CCR_MULTI ADC_COMMON_CCR_MULTI
-#define __HAL_ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE
-#define __ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE
-#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER ADC_NONMULTIMODE_OR_MULTIMODEMASTER
-#define __HAL_ADC_COMMON_ADC_OTHER ADC_COMMON_ADC_OTHER
-#define __HAL_ADC_MULTI_SLAVE ADC_MULTI_SLAVE
-
-#define __HAL_ADC_SQR1_L ADC_SQR1_L_SHIFT
-#define __HAL_ADC_JSQR_JL ADC_JSQR_JL_SHIFT
-#define __HAL_ADC_JSQR_RK_JL ADC_JSQR_RK_JL
-#define __HAL_ADC_CR1_DISCONTINUOUS_NUM ADC_CR1_DISCONTINUOUS_NUM
-#define __HAL_ADC_CR1_SCAN ADC_CR1_SCAN_SET
-#define __HAL_ADC_CONVCYCLES_MAX_RANGE ADC_CONVCYCLES_MAX_RANGE
-#define __HAL_ADC_CLOCK_PRESCALER_RANGE ADC_CLOCK_PRESCALER_RANGE
-#define __HAL_ADC_GET_CLOCK_PRESCALER ADC_GET_CLOCK_PRESCALER
-
-#define __HAL_ADC_SQR1 ADC_SQR1
-#define __HAL_ADC_SMPR1 ADC_SMPR1
-#define __HAL_ADC_SMPR2 ADC_SMPR2
-#define __HAL_ADC_SQR3_RK ADC_SQR3_RK
-#define __HAL_ADC_SQR2_RK ADC_SQR2_RK
-#define __HAL_ADC_SQR1_RK ADC_SQR1_RK
-#define __HAL_ADC_CR2_CONTINUOUS ADC_CR2_CONTINUOUS
-#define __HAL_ADC_CR1_DISCONTINUOUS ADC_CR1_DISCONTINUOUS
-#define __HAL_ADC_CR1_SCANCONV ADC_CR1_SCANCONV
-#define __HAL_ADC_CR2_EOCSelection ADC_CR2_EOCSelection
-#define __HAL_ADC_CR2_DMAContReq ADC_CR2_DMAContReq
-#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION
-#define __HAL_ADC_JSQR ADC_JSQR
-
-#define __HAL_ADC_CHSELR_CHANNEL ADC_CHSELR_CHANNEL
-#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS ADC_CFGR1_REG_DISCCONTINUOUS
-#define __HAL_ADC_CFGR1_AUTOOFF ADC_CFGR1_AUTOOFF
-#define __HAL_ADC_CFGR1_AUTOWAIT ADC_CFGR1_AUTOWAIT
-#define __HAL_ADC_CFGR1_CONTINUOUS ADC_CFGR1_CONTINUOUS
-#define __HAL_ADC_CFGR1_OVERRUN ADC_CFGR1_OVERRUN
-#define __HAL_ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR
-#define __HAL_ADC_CFGR1_DMACONTREQ ADC_CFGR1_DMACONTREQ
-
-/**
- * @}
- */
-
-/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
- * @{
- */
-#define __HAL_DHR12R1_ALIGNEMENT DAC_DHR12R1_ALIGNMENT
-#define __HAL_DHR12R2_ALIGNEMENT DAC_DHR12R2_ALIGNMENT
-#define __HAL_DHR12RD_ALIGNEMENT DAC_DHR12RD_ALIGNMENT
-#define IS_DAC_GENERATE_WAVE IS_DAC_WAVE
-
-/**
- * @}
- */
-
-/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose
- * @{
- */
-#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1
-#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1
-#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2
-#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2
-#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3
-#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3
-#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4
-#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4
-#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5
-#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5
-#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6
-#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6
-#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7
-#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7
-#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8
-#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8
-
-#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9
-#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9
-#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10
-#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10
-#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11
-#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11
-#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12
-#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12
-#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13
-#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13
-#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14
-#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14
-#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2
-#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2
-
-
-#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15
-#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15
-#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16
-#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16
-#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17
-#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17
-#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC
-#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC
-#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG
-#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG
-#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG
-#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG
-#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT
-#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT
-#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT
-#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT
-#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT
-#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT
-#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1
-#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1
-#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1
-#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1
-#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2
-#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2
-
-/**
- * @}
- */
-
-/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose
- * @{
- */
-#if defined(STM32F3)
-#define COMP_START __HAL_COMP_ENABLE
-#define COMP_STOP __HAL_COMP_DISABLE
-#define COMP_LOCK __HAL_COMP_LOCK
-
-#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
-#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
- __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE())
-#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
- __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE())
-#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
- __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE())
-#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
- __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE())
-#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
- __HAL_COMP_COMP6_EXTI_ENABLE_IT())
-#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
- __HAL_COMP_COMP6_EXTI_DISABLE_IT())
-#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
- ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
- __HAL_COMP_COMP6_EXTI_GET_FLAG())
-#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
- ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
- __HAL_COMP_COMP6_EXTI_CLEAR_FLAG())
-# endif
-# if defined(STM32F302xE) || defined(STM32F302xC)
-#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
- __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE())
-#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
- __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE())
-#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
- __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE())
-#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
- __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE())
-#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
- __HAL_COMP_COMP6_EXTI_ENABLE_IT())
-#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
- __HAL_COMP_COMP6_EXTI_DISABLE_IT())
-#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
- ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
- ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
- __HAL_COMP_COMP6_EXTI_GET_FLAG())
-#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
- ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
- ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
- __HAL_COMP_COMP6_EXTI_CLEAR_FLAG())
-# endif
-# if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx)
-#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() : \
- __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE())
-#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() : \
- __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE())
-#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() : \
- __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE())
-#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() : \
- __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE())
-#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_IT() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_IT() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_IT() : \
- __HAL_COMP_COMP7_EXTI_ENABLE_IT())
-#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_IT() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_IT() : \
- ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_IT() : \
- __HAL_COMP_COMP7_EXTI_DISABLE_IT())
-#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
- ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
- ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_GET_FLAG() : \
- ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
- ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_GET_FLAG() : \
- ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_GET_FLAG() : \
- __HAL_COMP_COMP7_EXTI_GET_FLAG())
-#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
- ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
- ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() : \
- ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
- ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \
- ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \
- __HAL_COMP_COMP7_EXTI_CLEAR_FLAG())
-# endif
-# if defined(STM32F373xC) ||defined(STM32F378xx)
-#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
- __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
-#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
- __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE())
-#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
- __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE())
-#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
- __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE())
-#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
- __HAL_COMP_COMP2_EXTI_ENABLE_IT())
-#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
- __HAL_COMP_COMP2_EXTI_DISABLE_IT())
-#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
- __HAL_COMP_COMP2_EXTI_GET_FLAG())
-#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
- __HAL_COMP_COMP2_EXTI_CLEAR_FLAG())
-# endif
-#else
-#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
- __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
-#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
- __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE())
-#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
- __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE())
-#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
- __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE())
-#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
- __HAL_COMP_COMP2_EXTI_ENABLE_IT())
-#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
- __HAL_COMP_COMP2_EXTI_DISABLE_IT())
-#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
- __HAL_COMP_COMP2_EXTI_GET_FLAG())
-#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
- __HAL_COMP_COMP2_EXTI_CLEAR_FLAG())
-#endif
-
-#define __HAL_COMP_GET_EXTI_LINE COMP_GET_EXTI_LINE
-
-#if defined(STM32L0) || defined(STM32L4)
-/* Note: On these STM32 families, the only argument of this macro */
-/* is COMP_FLAG_LOCK. */
-/* This macro is replaced by __HAL_COMP_IS_LOCKED with only HAL handle */
-/* argument. */
-#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_COMP_IS_LOCKED(__HANDLE__))
-#endif
-/**
- * @}
- */
-
-#if defined(STM32L0) || defined(STM32L4)
-/** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose
- * @{
- */
-#define HAL_COMP_Start_IT HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */
-#define HAL_COMP_Stop_IT HAL_COMP_Stop /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */
-/**
- * @}
- */
-#endif
-
-/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \
- ((WAVE) == DAC_WAVE_NOISE)|| \
- ((WAVE) == DAC_WAVE_TRIANGLE))
-
-/**
- * @}
- */
-
-/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define IS_WRPAREA IS_OB_WRPAREA
-#define IS_TYPEPROGRAM IS_FLASH_TYPEPROGRAM
-#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM
-#define IS_TYPEERASE IS_FLASH_TYPEERASE
-#define IS_NBSECTORS IS_FLASH_NBSECTORS
-#define IS_OB_WDG_SOURCE IS_OB_IWDG_SOURCE
-
-/**
- * @}
- */
-
-/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define __HAL_I2C_RESET_CR2 I2C_RESET_CR2
-#define __HAL_I2C_GENERATE_START I2C_GENERATE_START
-#define __HAL_I2C_FREQ_RANGE I2C_FREQ_RANGE
-#define __HAL_I2C_RISE_TIME I2C_RISE_TIME
-#define __HAL_I2C_SPEED_STANDARD I2C_SPEED_STANDARD
-#define __HAL_I2C_SPEED_FAST I2C_SPEED_FAST
-#define __HAL_I2C_SPEED I2C_SPEED
-#define __HAL_I2C_7BIT_ADD_WRITE I2C_7BIT_ADD_WRITE
-#define __HAL_I2C_7BIT_ADD_READ I2C_7BIT_ADD_READ
-#define __HAL_I2C_10BIT_ADDRESS I2C_10BIT_ADDRESS
-#define __HAL_I2C_10BIT_HEADER_WRITE I2C_10BIT_HEADER_WRITE
-#define __HAL_I2C_10BIT_HEADER_READ I2C_10BIT_HEADER_READ
-#define __HAL_I2C_MEM_ADD_MSB I2C_MEM_ADD_MSB
-#define __HAL_I2C_MEM_ADD_LSB I2C_MEM_ADD_LSB
-#define __HAL_I2C_FREQRANGE I2C_FREQRANGE
-/**
- * @}
- */
-
-/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define IS_I2S_INSTANCE IS_I2S_ALL_INSTANCE
-#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT
-
-/**
- * @}
- */
-
-/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define __IRDA_DISABLE __HAL_IRDA_DISABLE
-#define __IRDA_ENABLE __HAL_IRDA_ENABLE
-
-#define __HAL_IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE
-#define __HAL_IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION
-#define __IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE
-#define __IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION
-
-#define IS_IRDA_ONEBIT_SAMPLE IS_IRDA_ONE_BIT_SAMPLE
-
-
-/**
- * @}
- */
-
-
-/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose
- * @{
- */
-#define __HAL_IWDG_ENABLE_WRITE_ACCESS IWDG_ENABLE_WRITE_ACCESS
-#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS
-/**
- * @}
- */
-
-
-/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define __HAL_LPTIM_ENABLE_INTERRUPT __HAL_LPTIM_ENABLE_IT
-#define __HAL_LPTIM_DISABLE_INTERRUPT __HAL_LPTIM_DISABLE_IT
-#define __HAL_LPTIM_GET_ITSTATUS __HAL_LPTIM_GET_IT_SOURCE
-
-/**
- * @}
- */
-
-
-/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose
- * @{
- */
-#define __OPAMP_CSR_OPAXPD OPAMP_CSR_OPAXPD
-#define __OPAMP_CSR_S3SELX OPAMP_CSR_S3SELX
-#define __OPAMP_CSR_S4SELX OPAMP_CSR_S4SELX
-#define __OPAMP_CSR_S5SELX OPAMP_CSR_S5SELX
-#define __OPAMP_CSR_S6SELX OPAMP_CSR_S6SELX
-#define __OPAMP_CSR_OPAXCAL_L OPAMP_CSR_OPAXCAL_L
-#define __OPAMP_CSR_OPAXCAL_H OPAMP_CSR_OPAXCAL_H
-#define __OPAMP_CSR_OPAXLPM OPAMP_CSR_OPAXLPM
-#define __OPAMP_CSR_ALL_SWITCHES OPAMP_CSR_ALL_SWITCHES
-#define __OPAMP_CSR_ANAWSELX OPAMP_CSR_ANAWSELX
-#define __OPAMP_CSR_OPAXCALOUT OPAMP_CSR_OPAXCALOUT
-#define __OPAMP_OFFSET_TRIM_BITSPOSITION OPAMP_OFFSET_TRIM_BITSPOSITION
-#define __OPAMP_OFFSET_TRIM_SET OPAMP_OFFSET_TRIM_SET
-
-/**
- * @}
- */
-
-
-/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose
- * @{
- */
-#define __HAL_PVD_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT
-#define __HAL_PVD_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT
-#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
-#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
-#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
-#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
-#define __HAL_PVM_EVENT_DISABLE __HAL_PWR_PVM_EVENT_DISABLE
-#define __HAL_PVM_EVENT_ENABLE __HAL_PWR_PVM_EVENT_ENABLE
-#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE
-#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE
-#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE
-#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE
-#define __HAL_PWR_INTERNALWAKEUP_DISABLE HAL_PWREx_DisableInternalWakeUpLine
-#define __HAL_PWR_INTERNALWAKEUP_ENABLE HAL_PWREx_EnableInternalWakeUpLine
-#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE HAL_PWREx_DisablePullUpPullDownConfig
-#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE HAL_PWREx_EnablePullUpPullDownConfig
-#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); } while(0)
-#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT
-#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT
-#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
-#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
-#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
-#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
-#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
-#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
-#define __HAL_PWR_PVM_DISABLE() do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); } while(0)
-#define __HAL_PWR_PVM_ENABLE() do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); } while(0)
-#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE HAL_PWREx_DisableSRAM2ContentRetention
-#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE HAL_PWREx_EnableSRAM2ContentRetention
-#define __HAL_PWR_VDDIO2_DISABLE HAL_PWREx_DisableVddIO2
-#define __HAL_PWR_VDDIO2_ENABLE HAL_PWREx_EnableVddIO2
-#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE
-#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE
-#define __HAL_PWR_VDDUSB_DISABLE HAL_PWREx_DisableVddUSB
-#define __HAL_PWR_VDDUSB_ENABLE HAL_PWREx_EnableVddUSB
-
-#if defined (STM32F4)
-#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_ENABLE_IT()
-#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_DISABLE_IT()
-#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GET_FLAG()
-#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_CLEAR_FLAG()
-#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GENERATE_SWIT()
-#else
-#define __HAL_PVD_EXTI_CLEAR_FLAG __HAL_PWR_PVD_EXTI_CLEAR_FLAG
-#define __HAL_PVD_EXTI_DISABLE_IT __HAL_PWR_PVD_EXTI_DISABLE_IT
-#define __HAL_PVD_EXTI_ENABLE_IT __HAL_PWR_PVD_EXTI_ENABLE_IT
-#define __HAL_PVD_EXTI_GENERATE_SWIT __HAL_PWR_PVD_EXTI_GENERATE_SWIT
-#define __HAL_PVD_EXTI_GET_FLAG __HAL_PWR_PVD_EXTI_GET_FLAG
-#endif /* STM32F4 */
-/**
- * @}
- */
-
-
-/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose
- * @{
- */
-
-#define RCC_StopWakeUpClock_MSI RCC_STOP_WAKEUPCLOCK_MSI
-#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI
-
-#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback
-#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT())
-
-#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE
-#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE
-#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE
-#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE
-#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET
-#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET
-#define __ADC1_CLK_DISABLE __HAL_RCC_ADC1_CLK_DISABLE
-#define __ADC1_CLK_ENABLE __HAL_RCC_ADC1_CLK_ENABLE
-#define __ADC1_FORCE_RESET __HAL_RCC_ADC1_FORCE_RESET
-#define __ADC1_RELEASE_RESET __HAL_RCC_ADC1_RELEASE_RESET
-#define __ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC1_CLK_SLEEP_ENABLE
-#define __ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC1_CLK_SLEEP_DISABLE
-#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE
-#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE
-#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET
-#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET
-#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE
-#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE
-#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET
-#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET
-#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE
-#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE
-#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE
-#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE
-#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET
-#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET
-#define __CRYP_CLK_SLEEP_ENABLE __HAL_RCC_CRYP_CLK_SLEEP_ENABLE
-#define __CRYP_CLK_SLEEP_DISABLE __HAL_RCC_CRYP_CLK_SLEEP_DISABLE
-#define __CRYP_CLK_ENABLE __HAL_RCC_CRYP_CLK_ENABLE
-#define __CRYP_CLK_DISABLE __HAL_RCC_CRYP_CLK_DISABLE
-#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET
-#define __CRYP_RELEASE_RESET __HAL_RCC_CRYP_RELEASE_RESET
-#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE
-#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE
-#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET
-#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET
-#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET
-#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET
-#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET
-#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET
-#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET
-#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET
-#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET
-#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET
-#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET
-#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET
-#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET
-#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET
-#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE
-#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE
-#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET
-#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET
-#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE
-#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE
-#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE
-#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE
-#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET
-#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET
-#define __CAN_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE
-#define __CAN_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE
-#define __CAN_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET
-#define __CAN_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET
-#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE
-#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE
-#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET
-#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET
-#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE
-#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE
-#define __COMP_CLK_DISABLE __HAL_RCC_COMP_CLK_DISABLE
-#define __COMP_CLK_ENABLE __HAL_RCC_COMP_CLK_ENABLE
-#define __COMP_FORCE_RESET __HAL_RCC_COMP_FORCE_RESET
-#define __COMP_RELEASE_RESET __HAL_RCC_COMP_RELEASE_RESET
-#define __COMP_CLK_SLEEP_ENABLE __HAL_RCC_COMP_CLK_SLEEP_ENABLE
-#define __COMP_CLK_SLEEP_DISABLE __HAL_RCC_COMP_CLK_SLEEP_DISABLE
-#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET
-#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET
-#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE
-#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE
-#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE
-#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE
-#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET
-#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET
-#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE
-#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE
-#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET
-#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET
-#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE
-#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE
-#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE
-#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE
-#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET
-#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET
-#define __DBGMCU_CLK_ENABLE __HAL_RCC_DBGMCU_CLK_ENABLE
-#define __DBGMCU_CLK_DISABLE __HAL_RCC_DBGMCU_CLK_DISABLE
-#define __DBGMCU_FORCE_RESET __HAL_RCC_DBGMCU_FORCE_RESET
-#define __DBGMCU_RELEASE_RESET __HAL_RCC_DBGMCU_RELEASE_RESET
-#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE
-#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE
-#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE
-#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE
-#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET
-#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET
-#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE
-#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE
-#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE
-#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE
-#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET
-#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET
-#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE
-#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE
-#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE
-#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE
-#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET
-#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET
-#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE
-#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE
-#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET
-#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET
-#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE
-#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE
-#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE
-#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE
-#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE
-#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE
-#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE
-#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE
-#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE
-#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE
-#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET
-#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET
-#define __FLITF_CLK_DISABLE __HAL_RCC_FLITF_CLK_DISABLE
-#define __FLITF_CLK_ENABLE __HAL_RCC_FLITF_CLK_ENABLE
-#define __FLITF_FORCE_RESET __HAL_RCC_FLITF_FORCE_RESET
-#define __FLITF_RELEASE_RESET __HAL_RCC_FLITF_RELEASE_RESET
-#define __FLITF_CLK_SLEEP_ENABLE __HAL_RCC_FLITF_CLK_SLEEP_ENABLE
-#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE
-#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE
-#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE
-#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE
-#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE
-#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET
-#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET
-#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE
-#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE
-#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE
-#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE
-#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE
-#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE
-#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET
-#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET
-#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE
-#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE
-#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE
-#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE
-#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET
-#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET
-#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE
-#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE
-#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE
-#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE
-#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET
-#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET
-#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE
-#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE
-#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE
-#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE
-#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET
-#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET
-#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE
-#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE
-#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE
-#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE
-#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET
-#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET
-#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE
-#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE
-#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE
-#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE
-#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET
-#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET
-#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE
-#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE
-#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE
-#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE
-#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET
-#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET
-#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE
-#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE
-#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE
-#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE
-#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET
-#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET
-#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE
-#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE
-#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE
-#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE
-#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET
-#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET
-#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE
-#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE
-#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE
-#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE
-#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET
-#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET
-#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE
-#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE
-#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE
-#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE
-#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET
-#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET
-#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE
-#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE
-#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE
-#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE
-#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET
-#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET
-#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE
-#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE
-#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE
-#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE
-#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET
-#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET
-#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE
-#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE
-#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE
-#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE
-#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET
-#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET
-#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE
-#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE
-#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE
-#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE
-#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET
-#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET
-#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE
-#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE
-#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE
-#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE
-#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET
-#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET
-#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE
-#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE
-#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE
-#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE
-#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET
-#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET
-#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE
-#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE
-#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE
-#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE
-#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET
-#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET
-#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE
-#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE
-#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE
-#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE
-#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET
-#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET
-#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE
-#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE
-#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE
-#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE
-#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET
-#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET
-#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE
-#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE
-#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE
-#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE
-#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET
-#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET
-#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE
-#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE
-#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE
-#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE
-#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET
-#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET
-#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE
-#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE
-#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE
-#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE
-#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE
-#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE
-#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET
-#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET
-#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE
-#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE
-#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE
-#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE
-#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET
-#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET
-#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE
-#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE
-#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE
-#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE
-#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET
-#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET
-#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE
-#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE
-#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE
-#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE
-#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET
-#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET
-#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE
-#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE
-#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE
-#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE
-#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE
-#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE
-#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE
-#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE
-#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE
-#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE
-#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET
-#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET
-#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE
-#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE
-#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE
-#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE
-#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET
-#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET
-#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE
-#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE
-#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE
-#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE
-#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET
-#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET
-#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE
-#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE
-#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET
-#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET
-#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE
-#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE
-#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET
-#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET
-#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE
-#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE
-#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET
-#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET
-#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE
-#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE
-#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET
-#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET
-#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE
-#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE
-#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET
-#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET
-#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE
-#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE
-#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE
-#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE
-#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET
-#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET
-#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE
-#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE
-#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE
-#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE
-#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET
-#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET
-#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE
-#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE
-#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE
-#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE
-#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET
-#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET
-#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE
-#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE
-#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE
-#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE
-#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET
-#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET
-#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE
-#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE
-#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE
-#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE
-#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET
-#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET
-#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE
-#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE
-#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE
-#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE
-#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET
-#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET
-#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE
-#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE
-#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE
-#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE
-#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET
-#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET
-#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE
-#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE
-#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE
-#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE
-#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET
-#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET
-#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE
-#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE
-#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE
-#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE
-#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET
-#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET
-#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE
-#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE
-#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE
-#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE
-#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET
-#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET
-#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE
-#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE
-#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET
-#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET
-#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE
-#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE
-#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE
-#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE
-#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET
-#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET
-#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE
-#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE
-#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE
-#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE
-#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET
-#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET
-#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE
-#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE
-#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE
-#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE
-#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET
-#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET
-#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE
-#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE
-#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE
-#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE
-#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET
-#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET
-#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE
-#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE
-#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE
-#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE
-#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET
-#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET
-#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE
-#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE
-#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE
-#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE
-#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET
-#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET
-#define __USART4_CLK_DISABLE __HAL_RCC_USART4_CLK_DISABLE
-#define __USART4_CLK_ENABLE __HAL_RCC_USART4_CLK_ENABLE
-#define __USART4_CLK_SLEEP_ENABLE __HAL_RCC_USART4_CLK_SLEEP_ENABLE
-#define __USART4_CLK_SLEEP_DISABLE __HAL_RCC_USART4_CLK_SLEEP_DISABLE
-#define __USART4_FORCE_RESET __HAL_RCC_USART4_FORCE_RESET
-#define __USART4_RELEASE_RESET __HAL_RCC_USART4_RELEASE_RESET
-#define __USART5_CLK_DISABLE __HAL_RCC_USART5_CLK_DISABLE
-#define __USART5_CLK_ENABLE __HAL_RCC_USART5_CLK_ENABLE
-#define __USART5_CLK_SLEEP_ENABLE __HAL_RCC_USART5_CLK_SLEEP_ENABLE
-#define __USART5_CLK_SLEEP_DISABLE __HAL_RCC_USART5_CLK_SLEEP_DISABLE
-#define __USART5_FORCE_RESET __HAL_RCC_USART5_FORCE_RESET
-#define __USART5_RELEASE_RESET __HAL_RCC_USART5_RELEASE_RESET
-#define __USART7_CLK_DISABLE __HAL_RCC_USART7_CLK_DISABLE
-#define __USART7_CLK_ENABLE __HAL_RCC_USART7_CLK_ENABLE
-#define __USART7_FORCE_RESET __HAL_RCC_USART7_FORCE_RESET
-#define __USART7_RELEASE_RESET __HAL_RCC_USART7_RELEASE_RESET
-#define __USART8_CLK_DISABLE __HAL_RCC_USART8_CLK_DISABLE
-#define __USART8_CLK_ENABLE __HAL_RCC_USART8_CLK_ENABLE
-#define __USART8_FORCE_RESET __HAL_RCC_USART8_FORCE_RESET
-#define __USART8_RELEASE_RESET __HAL_RCC_USART8_RELEASE_RESET
-#define __USB_CLK_DISABLE __HAL_RCC_USB_CLK_DISABLE
-#define __USB_CLK_ENABLE __HAL_RCC_USB_CLK_ENABLE
-#define __USB_FORCE_RESET __HAL_RCC_USB_FORCE_RESET
-#define __USB_CLK_SLEEP_ENABLE __HAL_RCC_USB_CLK_SLEEP_ENABLE
-#define __USB_CLK_SLEEP_DISABLE __HAL_RCC_USB_CLK_SLEEP_DISABLE
-#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE
-#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE
-#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET
-#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE
-#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE
-#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE
-#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE
-#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET
-#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET
-#define __TIM21_CLK_ENABLE __HAL_RCC_TIM21_CLK_ENABLE
-#define __TIM21_CLK_DISABLE __HAL_RCC_TIM21_CLK_DISABLE
-#define __TIM21_FORCE_RESET __HAL_RCC_TIM21_FORCE_RESET
-#define __TIM21_RELEASE_RESET __HAL_RCC_TIM21_RELEASE_RESET
-#define __TIM21_CLK_SLEEP_ENABLE __HAL_RCC_TIM21_CLK_SLEEP_ENABLE
-#define __TIM21_CLK_SLEEP_DISABLE __HAL_RCC_TIM21_CLK_SLEEP_DISABLE
-#define __TIM22_CLK_ENABLE __HAL_RCC_TIM22_CLK_ENABLE
-#define __TIM22_CLK_DISABLE __HAL_RCC_TIM22_CLK_DISABLE
-#define __TIM22_FORCE_RESET __HAL_RCC_TIM22_FORCE_RESET
-#define __TIM22_RELEASE_RESET __HAL_RCC_TIM22_RELEASE_RESET
-#define __TIM22_CLK_SLEEP_ENABLE __HAL_RCC_TIM22_CLK_SLEEP_ENABLE
-#define __TIM22_CLK_SLEEP_DISABLE __HAL_RCC_TIM22_CLK_SLEEP_DISABLE
-#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE
-#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE
-#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE
-#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE
-#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET
-#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET
-#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE
-#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE
-
-#define __USB_OTG_FS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET
-#define __USB_OTG_FS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET
-#define __USB_OTG_FS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE
-#define __USB_OTG_FS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE
-#define __USB_OTG_HS_CLK_DISABLE __HAL_RCC_USB_OTG_HS_CLK_DISABLE
-#define __USB_OTG_HS_CLK_ENABLE __HAL_RCC_USB_OTG_HS_CLK_ENABLE
-#define __USB_OTG_HS_ULPI_CLK_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE
-#define __USB_OTG_HS_ULPI_CLK_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE
-#define __TIM9_CLK_SLEEP_ENABLE __HAL_RCC_TIM9_CLK_SLEEP_ENABLE
-#define __TIM9_CLK_SLEEP_DISABLE __HAL_RCC_TIM9_CLK_SLEEP_DISABLE
-#define __TIM10_CLK_SLEEP_ENABLE __HAL_RCC_TIM10_CLK_SLEEP_ENABLE
-#define __TIM10_CLK_SLEEP_DISABLE __HAL_RCC_TIM10_CLK_SLEEP_DISABLE
-#define __TIM11_CLK_SLEEP_ENABLE __HAL_RCC_TIM11_CLK_SLEEP_ENABLE
-#define __TIM11_CLK_SLEEP_DISABLE __HAL_RCC_TIM11_CLK_SLEEP_DISABLE
-#define __ETHMACPTP_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE
-#define __ETHMACPTP_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE
-#define __ETHMACPTP_CLK_ENABLE __HAL_RCC_ETHMACPTP_CLK_ENABLE
-#define __ETHMACPTP_CLK_DISABLE __HAL_RCC_ETHMACPTP_CLK_DISABLE
-#define __HASH_CLK_ENABLE __HAL_RCC_HASH_CLK_ENABLE
-#define __HASH_FORCE_RESET __HAL_RCC_HASH_FORCE_RESET
-#define __HASH_RELEASE_RESET __HAL_RCC_HASH_RELEASE_RESET
-#define __HASH_CLK_SLEEP_ENABLE __HAL_RCC_HASH_CLK_SLEEP_ENABLE
-#define __HASH_CLK_SLEEP_DISABLE __HAL_RCC_HASH_CLK_SLEEP_DISABLE
-#define __HASH_CLK_DISABLE __HAL_RCC_HASH_CLK_DISABLE
-#define __SPI5_CLK_ENABLE __HAL_RCC_SPI5_CLK_ENABLE
-#define __SPI5_CLK_DISABLE __HAL_RCC_SPI5_CLK_DISABLE
-#define __SPI5_FORCE_RESET __HAL_RCC_SPI5_FORCE_RESET
-#define __SPI5_RELEASE_RESET __HAL_RCC_SPI5_RELEASE_RESET
-#define __SPI5_CLK_SLEEP_ENABLE __HAL_RCC_SPI5_CLK_SLEEP_ENABLE
-#define __SPI5_CLK_SLEEP_DISABLE __HAL_RCC_SPI5_CLK_SLEEP_DISABLE
-#define __SPI6_CLK_ENABLE __HAL_RCC_SPI6_CLK_ENABLE
-#define __SPI6_CLK_DISABLE __HAL_RCC_SPI6_CLK_DISABLE
-#define __SPI6_FORCE_RESET __HAL_RCC_SPI6_FORCE_RESET
-#define __SPI6_RELEASE_RESET __HAL_RCC_SPI6_RELEASE_RESET
-#define __SPI6_CLK_SLEEP_ENABLE __HAL_RCC_SPI6_CLK_SLEEP_ENABLE
-#define __SPI6_CLK_SLEEP_DISABLE __HAL_RCC_SPI6_CLK_SLEEP_DISABLE
-#define __LTDC_CLK_ENABLE __HAL_RCC_LTDC_CLK_ENABLE
-#define __LTDC_CLK_DISABLE __HAL_RCC_LTDC_CLK_DISABLE
-#define __LTDC_FORCE_RESET __HAL_RCC_LTDC_FORCE_RESET
-#define __LTDC_RELEASE_RESET __HAL_RCC_LTDC_RELEASE_RESET
-#define __LTDC_CLK_SLEEP_ENABLE __HAL_RCC_LTDC_CLK_SLEEP_ENABLE
-#define __ETHMAC_CLK_SLEEP_ENABLE __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE
-#define __ETHMAC_CLK_SLEEP_DISABLE __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE
-#define __ETHMACTX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE
-#define __ETHMACTX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE
-#define __ETHMACRX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE
-#define __ETHMACRX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE
-#define __TIM12_CLK_SLEEP_ENABLE __HAL_RCC_TIM12_CLK_SLEEP_ENABLE
-#define __TIM12_CLK_SLEEP_DISABLE __HAL_RCC_TIM12_CLK_SLEEP_DISABLE
-#define __TIM13_CLK_SLEEP_ENABLE __HAL_RCC_TIM13_CLK_SLEEP_ENABLE
-#define __TIM13_CLK_SLEEP_DISABLE __HAL_RCC_TIM13_CLK_SLEEP_DISABLE
-#define __TIM14_CLK_SLEEP_ENABLE __HAL_RCC_TIM14_CLK_SLEEP_ENABLE
-#define __TIM14_CLK_SLEEP_DISABLE __HAL_RCC_TIM14_CLK_SLEEP_DISABLE
-#define __BKPSRAM_CLK_ENABLE __HAL_RCC_BKPSRAM_CLK_ENABLE
-#define __BKPSRAM_CLK_DISABLE __HAL_RCC_BKPSRAM_CLK_DISABLE
-#define __BKPSRAM_CLK_SLEEP_ENABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE
-#define __BKPSRAM_CLK_SLEEP_DISABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE
-#define __CCMDATARAMEN_CLK_ENABLE __HAL_RCC_CCMDATARAMEN_CLK_ENABLE
-#define __CCMDATARAMEN_CLK_DISABLE __HAL_RCC_CCMDATARAMEN_CLK_DISABLE
-#define __USART6_CLK_ENABLE __HAL_RCC_USART6_CLK_ENABLE
-#define __USART6_CLK_DISABLE __HAL_RCC_USART6_CLK_DISABLE
-#define __USART6_FORCE_RESET __HAL_RCC_USART6_FORCE_RESET
-#define __USART6_RELEASE_RESET __HAL_RCC_USART6_RELEASE_RESET
-#define __USART6_CLK_SLEEP_ENABLE __HAL_RCC_USART6_CLK_SLEEP_ENABLE
-#define __USART6_CLK_SLEEP_DISABLE __HAL_RCC_USART6_CLK_SLEEP_DISABLE
-#define __SPI4_CLK_ENABLE __HAL_RCC_SPI4_CLK_ENABLE
-#define __SPI4_CLK_DISABLE __HAL_RCC_SPI4_CLK_DISABLE
-#define __SPI4_FORCE_RESET __HAL_RCC_SPI4_FORCE_RESET
-#define __SPI4_RELEASE_RESET __HAL_RCC_SPI4_RELEASE_RESET
-#define __SPI4_CLK_SLEEP_ENABLE __HAL_RCC_SPI4_CLK_SLEEP_ENABLE
-#define __SPI4_CLK_SLEEP_DISABLE __HAL_RCC_SPI4_CLK_SLEEP_DISABLE
-#define __GPIOI_CLK_ENABLE __HAL_RCC_GPIOI_CLK_ENABLE
-#define __GPIOI_CLK_DISABLE __HAL_RCC_GPIOI_CLK_DISABLE
-#define __GPIOI_FORCE_RESET __HAL_RCC_GPIOI_FORCE_RESET
-#define __GPIOI_RELEASE_RESET __HAL_RCC_GPIOI_RELEASE_RESET
-#define __GPIOI_CLK_SLEEP_ENABLE __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE
-#define __GPIOI_CLK_SLEEP_DISABLE __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE
-#define __GPIOJ_CLK_ENABLE __HAL_RCC_GPIOJ_CLK_ENABLE
-#define __GPIOJ_CLK_DISABLE __HAL_RCC_GPIOJ_CLK_DISABLE
-#define __GPIOJ_FORCE_RESET __HAL_RCC_GPIOJ_FORCE_RESET
-#define __GPIOJ_RELEASE_RESET __HAL_RCC_GPIOJ_RELEASE_RESET
-#define __GPIOJ_CLK_SLEEP_ENABLE __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE
-#define __GPIOJ_CLK_SLEEP_DISABLE __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE
-#define __GPIOK_CLK_ENABLE __HAL_RCC_GPIOK_CLK_ENABLE
-#define __GPIOK_CLK_DISABLE __HAL_RCC_GPIOK_CLK_DISABLE
-#define __GPIOK_RELEASE_RESET __HAL_RCC_GPIOK_RELEASE_RESET
-#define __GPIOK_CLK_SLEEP_ENABLE __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE
-#define __GPIOK_CLK_SLEEP_DISABLE __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE
-#define __ETH_CLK_ENABLE __HAL_RCC_ETH_CLK_ENABLE
-#define __ETH_CLK_DISABLE __HAL_RCC_ETH_CLK_DISABLE
-#define __DCMI_CLK_ENABLE __HAL_RCC_DCMI_CLK_ENABLE
-#define __DCMI_CLK_DISABLE __HAL_RCC_DCMI_CLK_DISABLE
-#define __DCMI_FORCE_RESET __HAL_RCC_DCMI_FORCE_RESET
-#define __DCMI_RELEASE_RESET __HAL_RCC_DCMI_RELEASE_RESET
-#define __DCMI_CLK_SLEEP_ENABLE __HAL_RCC_DCMI_CLK_SLEEP_ENABLE
-#define __DCMI_CLK_SLEEP_DISABLE __HAL_RCC_DCMI_CLK_SLEEP_DISABLE
-#define __UART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE
-#define __UART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE
-#define __UART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET
-#define __UART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET
-#define __UART7_CLK_SLEEP_ENABLE __HAL_RCC_UART7_CLK_SLEEP_ENABLE
-#define __UART7_CLK_SLEEP_DISABLE __HAL_RCC_UART7_CLK_SLEEP_DISABLE
-#define __UART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE
-#define __UART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE
-#define __UART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET
-#define __UART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET
-#define __UART8_CLK_SLEEP_ENABLE __HAL_RCC_UART8_CLK_SLEEP_ENABLE
-#define __UART8_CLK_SLEEP_DISABLE __HAL_RCC_UART8_CLK_SLEEP_DISABLE
-#define __OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
-#define __OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
-#define __OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET
-#define __OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET
-#define __OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
-#define __OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE
-#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
-#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
-#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED
-#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED
-#define __HAL_RCC_OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET
-#define __HAL_RCC_OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET
-#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
-#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE
-#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED
-#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED
-#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET
-#define __SRAM3_CLK_SLEEP_ENABLE __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE
-#define __CAN2_CLK_SLEEP_ENABLE __HAL_RCC_CAN2_CLK_SLEEP_ENABLE
-#define __CAN2_CLK_SLEEP_DISABLE __HAL_RCC_CAN2_CLK_SLEEP_DISABLE
-#define __DAC_CLK_SLEEP_ENABLE __HAL_RCC_DAC_CLK_SLEEP_ENABLE
-#define __DAC_CLK_SLEEP_DISABLE __HAL_RCC_DAC_CLK_SLEEP_DISABLE
-#define __ADC2_CLK_SLEEP_ENABLE __HAL_RCC_ADC2_CLK_SLEEP_ENABLE
-#define __ADC2_CLK_SLEEP_DISABLE __HAL_RCC_ADC2_CLK_SLEEP_DISABLE
-#define __ADC3_CLK_SLEEP_ENABLE __HAL_RCC_ADC3_CLK_SLEEP_ENABLE
-#define __ADC3_CLK_SLEEP_DISABLE __HAL_RCC_ADC3_CLK_SLEEP_DISABLE
-#define __FSMC_FORCE_RESET __HAL_RCC_FSMC_FORCE_RESET
-#define __FSMC_RELEASE_RESET __HAL_RCC_FSMC_RELEASE_RESET
-#define __FSMC_CLK_SLEEP_ENABLE __HAL_RCC_FSMC_CLK_SLEEP_ENABLE
-#define __FSMC_CLK_SLEEP_DISABLE __HAL_RCC_FSMC_CLK_SLEEP_DISABLE
-#define __SDIO_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET
-#define __SDIO_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET
-#define __SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
-#define __SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE
-#define __DMA2D_CLK_ENABLE __HAL_RCC_DMA2D_CLK_ENABLE
-#define __DMA2D_CLK_DISABLE __HAL_RCC_DMA2D_CLK_DISABLE
-#define __DMA2D_FORCE_RESET __HAL_RCC_DMA2D_FORCE_RESET
-#define __DMA2D_RELEASE_RESET __HAL_RCC_DMA2D_RELEASE_RESET
-#define __DMA2D_CLK_SLEEP_ENABLE __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE
-#define __DMA2D_CLK_SLEEP_DISABLE __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE
-
-/* alias define maintained for legacy */
-#define __HAL_RCC_OTGFS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET
-#define __HAL_RCC_OTGFS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET
-
-#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE
-#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE
-#define __ADC34_CLK_ENABLE __HAL_RCC_ADC34_CLK_ENABLE
-#define __ADC34_CLK_DISABLE __HAL_RCC_ADC34_CLK_DISABLE
-#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE
-#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE
-#define __DAC2_CLK_ENABLE __HAL_RCC_DAC2_CLK_ENABLE
-#define __DAC2_CLK_DISABLE __HAL_RCC_DAC2_CLK_DISABLE
-#define __TIM18_CLK_ENABLE __HAL_RCC_TIM18_CLK_ENABLE
-#define __TIM18_CLK_DISABLE __HAL_RCC_TIM18_CLK_DISABLE
-#define __TIM19_CLK_ENABLE __HAL_RCC_TIM19_CLK_ENABLE
-#define __TIM19_CLK_DISABLE __HAL_RCC_TIM19_CLK_DISABLE
-#define __TIM20_CLK_ENABLE __HAL_RCC_TIM20_CLK_ENABLE
-#define __TIM20_CLK_DISABLE __HAL_RCC_TIM20_CLK_DISABLE
-#define __HRTIM1_CLK_ENABLE __HAL_RCC_HRTIM1_CLK_ENABLE
-#define __HRTIM1_CLK_DISABLE __HAL_RCC_HRTIM1_CLK_DISABLE
-#define __SDADC1_CLK_ENABLE __HAL_RCC_SDADC1_CLK_ENABLE
-#define __SDADC2_CLK_ENABLE __HAL_RCC_SDADC2_CLK_ENABLE
-#define __SDADC3_CLK_ENABLE __HAL_RCC_SDADC3_CLK_ENABLE
-#define __SDADC1_CLK_DISABLE __HAL_RCC_SDADC1_CLK_DISABLE
-#define __SDADC2_CLK_DISABLE __HAL_RCC_SDADC2_CLK_DISABLE
-#define __SDADC3_CLK_DISABLE __HAL_RCC_SDADC3_CLK_DISABLE
-
-#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET
-#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET
-#define __ADC34_FORCE_RESET __HAL_RCC_ADC34_FORCE_RESET
-#define __ADC34_RELEASE_RESET __HAL_RCC_ADC34_RELEASE_RESET
-#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET
-#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET
-#define __DAC2_FORCE_RESET __HAL_RCC_DAC2_FORCE_RESET
-#define __DAC2_RELEASE_RESET __HAL_RCC_DAC2_RELEASE_RESET
-#define __TIM18_FORCE_RESET __HAL_RCC_TIM18_FORCE_RESET
-#define __TIM18_RELEASE_RESET __HAL_RCC_TIM18_RELEASE_RESET
-#define __TIM19_FORCE_RESET __HAL_RCC_TIM19_FORCE_RESET
-#define __TIM19_RELEASE_RESET __HAL_RCC_TIM19_RELEASE_RESET
-#define __TIM20_FORCE_RESET __HAL_RCC_TIM20_FORCE_RESET
-#define __TIM20_RELEASE_RESET __HAL_RCC_TIM20_RELEASE_RESET
-#define __HRTIM1_FORCE_RESET __HAL_RCC_HRTIM1_FORCE_RESET
-#define __HRTIM1_RELEASE_RESET __HAL_RCC_HRTIM1_RELEASE_RESET
-#define __SDADC1_FORCE_RESET __HAL_RCC_SDADC1_FORCE_RESET
-#define __SDADC2_FORCE_RESET __HAL_RCC_SDADC2_FORCE_RESET
-#define __SDADC3_FORCE_RESET __HAL_RCC_SDADC3_FORCE_RESET
-#define __SDADC1_RELEASE_RESET __HAL_RCC_SDADC1_RELEASE_RESET
-#define __SDADC2_RELEASE_RESET __HAL_RCC_SDADC2_RELEASE_RESET
-#define __SDADC3_RELEASE_RESET __HAL_RCC_SDADC3_RELEASE_RESET
-
-#define __ADC1_IS_CLK_ENABLED __HAL_RCC_ADC1_IS_CLK_ENABLED
-#define __ADC1_IS_CLK_DISABLED __HAL_RCC_ADC1_IS_CLK_DISABLED
-#define __ADC12_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED
-#define __ADC12_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED
-#define __ADC34_IS_CLK_ENABLED __HAL_RCC_ADC34_IS_CLK_ENABLED
-#define __ADC34_IS_CLK_DISABLED __HAL_RCC_ADC34_IS_CLK_DISABLED
-#define __CEC_IS_CLK_ENABLED __HAL_RCC_CEC_IS_CLK_ENABLED
-#define __CEC_IS_CLK_DISABLED __HAL_RCC_CEC_IS_CLK_DISABLED
-#define __CRC_IS_CLK_ENABLED __HAL_RCC_CRC_IS_CLK_ENABLED
-#define __CRC_IS_CLK_DISABLED __HAL_RCC_CRC_IS_CLK_DISABLED
-#define __DAC1_IS_CLK_ENABLED __HAL_RCC_DAC1_IS_CLK_ENABLED
-#define __DAC1_IS_CLK_DISABLED __HAL_RCC_DAC1_IS_CLK_DISABLED
-#define __DAC2_IS_CLK_ENABLED __HAL_RCC_DAC2_IS_CLK_ENABLED
-#define __DAC2_IS_CLK_DISABLED __HAL_RCC_DAC2_IS_CLK_DISABLED
-#define __DMA1_IS_CLK_ENABLED __HAL_RCC_DMA1_IS_CLK_ENABLED
-#define __DMA1_IS_CLK_DISABLED __HAL_RCC_DMA1_IS_CLK_DISABLED
-#define __DMA2_IS_CLK_ENABLED __HAL_RCC_DMA2_IS_CLK_ENABLED
-#define __DMA2_IS_CLK_DISABLED __HAL_RCC_DMA2_IS_CLK_DISABLED
-#define __FLITF_IS_CLK_ENABLED __HAL_RCC_FLITF_IS_CLK_ENABLED
-#define __FLITF_IS_CLK_DISABLED __HAL_RCC_FLITF_IS_CLK_DISABLED
-#define __FMC_IS_CLK_ENABLED __HAL_RCC_FMC_IS_CLK_ENABLED
-#define __FMC_IS_CLK_DISABLED __HAL_RCC_FMC_IS_CLK_DISABLED
-#define __GPIOA_IS_CLK_ENABLED __HAL_RCC_GPIOA_IS_CLK_ENABLED
-#define __GPIOA_IS_CLK_DISABLED __HAL_RCC_GPIOA_IS_CLK_DISABLED
-#define __GPIOB_IS_CLK_ENABLED __HAL_RCC_GPIOB_IS_CLK_ENABLED
-#define __GPIOB_IS_CLK_DISABLED __HAL_RCC_GPIOB_IS_CLK_DISABLED
-#define __GPIOC_IS_CLK_ENABLED __HAL_RCC_GPIOC_IS_CLK_ENABLED
-#define __GPIOC_IS_CLK_DISABLED __HAL_RCC_GPIOC_IS_CLK_DISABLED
-#define __GPIOD_IS_CLK_ENABLED __HAL_RCC_GPIOD_IS_CLK_ENABLED
-#define __GPIOD_IS_CLK_DISABLED __HAL_RCC_GPIOD_IS_CLK_DISABLED
-#define __GPIOE_IS_CLK_ENABLED __HAL_RCC_GPIOE_IS_CLK_ENABLED
-#define __GPIOE_IS_CLK_DISABLED __HAL_RCC_GPIOE_IS_CLK_DISABLED
-#define __GPIOF_IS_CLK_ENABLED __HAL_RCC_GPIOF_IS_CLK_ENABLED
-#define __GPIOF_IS_CLK_DISABLED __HAL_RCC_GPIOF_IS_CLK_DISABLED
-#define __GPIOG_IS_CLK_ENABLED __HAL_RCC_GPIOG_IS_CLK_ENABLED
-#define __GPIOG_IS_CLK_DISABLED __HAL_RCC_GPIOG_IS_CLK_DISABLED
-#define __GPIOH_IS_CLK_ENABLED __HAL_RCC_GPIOH_IS_CLK_ENABLED
-#define __GPIOH_IS_CLK_DISABLED __HAL_RCC_GPIOH_IS_CLK_DISABLED
-#define __HRTIM1_IS_CLK_ENABLED __HAL_RCC_HRTIM1_IS_CLK_ENABLED
-#define __HRTIM1_IS_CLK_DISABLED __HAL_RCC_HRTIM1_IS_CLK_DISABLED
-#define __I2C1_IS_CLK_ENABLED __HAL_RCC_I2C1_IS_CLK_ENABLED
-#define __I2C1_IS_CLK_DISABLED __HAL_RCC_I2C1_IS_CLK_DISABLED
-#define __I2C2_IS_CLK_ENABLED __HAL_RCC_I2C2_IS_CLK_ENABLED
-#define __I2C2_IS_CLK_DISABLED __HAL_RCC_I2C2_IS_CLK_DISABLED
-#define __I2C3_IS_CLK_ENABLED __HAL_RCC_I2C3_IS_CLK_ENABLED
-#define __I2C3_IS_CLK_DISABLED __HAL_RCC_I2C3_IS_CLK_DISABLED
-#define __PWR_IS_CLK_ENABLED __HAL_RCC_PWR_IS_CLK_ENABLED
-#define __PWR_IS_CLK_DISABLED __HAL_RCC_PWR_IS_CLK_DISABLED
-#define __SYSCFG_IS_CLK_ENABLED __HAL_RCC_SYSCFG_IS_CLK_ENABLED
-#define __SYSCFG_IS_CLK_DISABLED __HAL_RCC_SYSCFG_IS_CLK_DISABLED
-#define __SPI1_IS_CLK_ENABLED __HAL_RCC_SPI1_IS_CLK_ENABLED
-#define __SPI1_IS_CLK_DISABLED __HAL_RCC_SPI1_IS_CLK_DISABLED
-#define __SPI2_IS_CLK_ENABLED __HAL_RCC_SPI2_IS_CLK_ENABLED
-#define __SPI2_IS_CLK_DISABLED __HAL_RCC_SPI2_IS_CLK_DISABLED
-#define __SPI3_IS_CLK_ENABLED __HAL_RCC_SPI3_IS_CLK_ENABLED
-#define __SPI3_IS_CLK_DISABLED __HAL_RCC_SPI3_IS_CLK_DISABLED
-#define __SPI4_IS_CLK_ENABLED __HAL_RCC_SPI4_IS_CLK_ENABLED
-#define __SPI4_IS_CLK_DISABLED __HAL_RCC_SPI4_IS_CLK_DISABLED
-#define __SDADC1_IS_CLK_ENABLED __HAL_RCC_SDADC1_IS_CLK_ENABLED
-#define __SDADC1_IS_CLK_DISABLED __HAL_RCC_SDADC1_IS_CLK_DISABLED
-#define __SDADC2_IS_CLK_ENABLED __HAL_RCC_SDADC2_IS_CLK_ENABLED
-#define __SDADC2_IS_CLK_DISABLED __HAL_RCC_SDADC2_IS_CLK_DISABLED
-#define __SDADC3_IS_CLK_ENABLED __HAL_RCC_SDADC3_IS_CLK_ENABLED
-#define __SDADC3_IS_CLK_DISABLED __HAL_RCC_SDADC3_IS_CLK_DISABLED
-#define __SRAM_IS_CLK_ENABLED __HAL_RCC_SRAM_IS_CLK_ENABLED
-#define __SRAM_IS_CLK_DISABLED __HAL_RCC_SRAM_IS_CLK_DISABLED
-#define __TIM1_IS_CLK_ENABLED __HAL_RCC_TIM1_IS_CLK_ENABLED
-#define __TIM1_IS_CLK_DISABLED __HAL_RCC_TIM1_IS_CLK_DISABLED
-#define __TIM2_IS_CLK_ENABLED __HAL_RCC_TIM2_IS_CLK_ENABLED
-#define __TIM2_IS_CLK_DISABLED __HAL_RCC_TIM2_IS_CLK_DISABLED
-#define __TIM3_IS_CLK_ENABLED __HAL_RCC_TIM3_IS_CLK_ENABLED
-#define __TIM3_IS_CLK_DISABLED __HAL_RCC_TIM3_IS_CLK_DISABLED
-#define __TIM4_IS_CLK_ENABLED __HAL_RCC_TIM4_IS_CLK_ENABLED
-#define __TIM4_IS_CLK_DISABLED __HAL_RCC_TIM4_IS_CLK_DISABLED
-#define __TIM5_IS_CLK_ENABLED __HAL_RCC_TIM5_IS_CLK_ENABLED
-#define __TIM5_IS_CLK_DISABLED __HAL_RCC_TIM5_IS_CLK_DISABLED
-#define __TIM6_IS_CLK_ENABLED __HAL_RCC_TIM6_IS_CLK_ENABLED
-#define __TIM6_IS_CLK_DISABLED __HAL_RCC_TIM6_IS_CLK_DISABLED
-#define __TIM7_IS_CLK_ENABLED __HAL_RCC_TIM7_IS_CLK_ENABLED
-#define __TIM7_IS_CLK_DISABLED __HAL_RCC_TIM7_IS_CLK_DISABLED
-#define __TIM8_IS_CLK_ENABLED __HAL_RCC_TIM8_IS_CLK_ENABLED
-#define __TIM8_IS_CLK_DISABLED __HAL_RCC_TIM8_IS_CLK_DISABLED
-#define __TIM12_IS_CLK_ENABLED __HAL_RCC_TIM12_IS_CLK_ENABLED
-#define __TIM12_IS_CLK_DISABLED __HAL_RCC_TIM12_IS_CLK_DISABLED
-#define __TIM13_IS_CLK_ENABLED __HAL_RCC_TIM13_IS_CLK_ENABLED
-#define __TIM13_IS_CLK_DISABLED __HAL_RCC_TIM13_IS_CLK_DISABLED
-#define __TIM14_IS_CLK_ENABLED __HAL_RCC_TIM14_IS_CLK_ENABLED
-#define __TIM14_IS_CLK_DISABLED __HAL_RCC_TIM14_IS_CLK_DISABLED
-#define __TIM15_IS_CLK_ENABLED __HAL_RCC_TIM15_IS_CLK_ENABLED
-#define __TIM15_IS_CLK_DISABLED __HAL_RCC_TIM15_IS_CLK_DISABLED
-#define __TIM16_IS_CLK_ENABLED __HAL_RCC_TIM16_IS_CLK_ENABLED
-#define __TIM16_IS_CLK_DISABLED __HAL_RCC_TIM16_IS_CLK_DISABLED
-#define __TIM17_IS_CLK_ENABLED __HAL_RCC_TIM17_IS_CLK_ENABLED
-#define __TIM17_IS_CLK_DISABLED __HAL_RCC_TIM17_IS_CLK_DISABLED
-#define __TIM18_IS_CLK_ENABLED __HAL_RCC_TIM18_IS_CLK_ENABLED
-#define __TIM18_IS_CLK_DISABLED __HAL_RCC_TIM18_IS_CLK_DISABLED
-#define __TIM19_IS_CLK_ENABLED __HAL_RCC_TIM19_IS_CLK_ENABLED
-#define __TIM19_IS_CLK_DISABLED __HAL_RCC_TIM19_IS_CLK_DISABLED
-#define __TIM20_IS_CLK_ENABLED __HAL_RCC_TIM20_IS_CLK_ENABLED
-#define __TIM20_IS_CLK_DISABLED __HAL_RCC_TIM20_IS_CLK_DISABLED
-#define __TSC_IS_CLK_ENABLED __HAL_RCC_TSC_IS_CLK_ENABLED
-#define __TSC_IS_CLK_DISABLED __HAL_RCC_TSC_IS_CLK_DISABLED
-#define __UART4_IS_CLK_ENABLED __HAL_RCC_UART4_IS_CLK_ENABLED
-#define __UART4_IS_CLK_DISABLED __HAL_RCC_UART4_IS_CLK_DISABLED
-#define __UART5_IS_CLK_ENABLED __HAL_RCC_UART5_IS_CLK_ENABLED
-#define __UART5_IS_CLK_DISABLED __HAL_RCC_UART5_IS_CLK_DISABLED
-#define __USART1_IS_CLK_ENABLED __HAL_RCC_USART1_IS_CLK_ENABLED
-#define __USART1_IS_CLK_DISABLED __HAL_RCC_USART1_IS_CLK_DISABLED
-#define __USART2_IS_CLK_ENABLED __HAL_RCC_USART2_IS_CLK_ENABLED
-#define __USART2_IS_CLK_DISABLED __HAL_RCC_USART2_IS_CLK_DISABLED
-#define __USART3_IS_CLK_ENABLED __HAL_RCC_USART3_IS_CLK_ENABLED
-#define __USART3_IS_CLK_DISABLED __HAL_RCC_USART3_IS_CLK_DISABLED
-#define __USB_IS_CLK_ENABLED __HAL_RCC_USB_IS_CLK_ENABLED
-#define __USB_IS_CLK_DISABLED __HAL_RCC_USB_IS_CLK_DISABLED
-#define __WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG_IS_CLK_ENABLED
-#define __WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG_IS_CLK_DISABLED
-
-#if defined(STM32F4)
-#define __HAL_RCC_SDMMC1_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET
-#define __HAL_RCC_SDMMC1_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET
-#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE
-#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
-#define __HAL_RCC_SDMMC1_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE
-#define __HAL_RCC_SDMMC1_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE
-#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED __HAL_RCC_SDIO_IS_CLK_ENABLED
-#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED __HAL_RCC_SDIO_IS_CLK_DISABLED
-#define Sdmmc1ClockSelection SdioClockSelection
-#define RCC_PERIPHCLK_SDMMC1 RCC_PERIPHCLK_SDIO
-#define RCC_SDMMC1CLKSOURCE_CLK48 RCC_SDIOCLKSOURCE_CK48
-#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_SDIOCLKSOURCE_SYSCLK
-#define __HAL_RCC_SDMMC1_CONFIG __HAL_RCC_SDIO_CONFIG
-#define __HAL_RCC_GET_SDMMC1_SOURCE __HAL_RCC_GET_SDIO_SOURCE
-#endif
-
-#if defined(STM32F7) || defined(STM32L4)
-#define __HAL_RCC_SDIO_FORCE_RESET __HAL_RCC_SDMMC1_FORCE_RESET
-#define __HAL_RCC_SDIO_RELEASE_RESET __HAL_RCC_SDMMC1_RELEASE_RESET
-#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE
-#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE
-#define __HAL_RCC_SDIO_CLK_ENABLE __HAL_RCC_SDMMC1_CLK_ENABLE
-#define __HAL_RCC_SDIO_CLK_DISABLE __HAL_RCC_SDMMC1_CLK_DISABLE
-#define __HAL_RCC_SDIO_IS_CLK_ENABLED __HAL_RCC_SDMMC1_IS_CLK_ENABLED
-#define __HAL_RCC_SDIO_IS_CLK_DISABLED __HAL_RCC_SDMMC1_IS_CLK_DISABLED
-#define SdioClockSelection Sdmmc1ClockSelection
-#define RCC_PERIPHCLK_SDIO RCC_PERIPHCLK_SDMMC1
-#define __HAL_RCC_SDIO_CONFIG __HAL_RCC_SDMMC1_CONFIG
-#define __HAL_RCC_GET_SDIO_SOURCE __HAL_RCC_GET_SDMMC1_SOURCE
-#endif
-
-#if defined(STM32F7)
-#define RCC_SDIOCLKSOURCE_CLK48 RCC_SDMMC1CLKSOURCE_CLK48
-#define RCC_SDIOCLKSOURCE_SYSCLK RCC_SDMMC1CLKSOURCE_SYSCLK
-#endif
-
-#define __HAL_RCC_I2SCLK __HAL_RCC_I2S_CONFIG
-#define __HAL_RCC_I2SCLK_CONFIG __HAL_RCC_I2S_CONFIG
-
-#define __RCC_PLLSRC RCC_GET_PLL_OSCSOURCE
-
-#define IS_RCC_MSIRANGE IS_RCC_MSI_CLOCK_RANGE
-#define IS_RCC_RTCCLK_SOURCE IS_RCC_RTCCLKSOURCE
-#define IS_RCC_SYSCLK_DIV IS_RCC_HCLK
-#define IS_RCC_HCLK_DIV IS_RCC_PCLK
-#define IS_RCC_PERIPHCLK IS_RCC_PERIPHCLOCK
-
-#define RCC_IT_HSI14 RCC_IT_HSI14RDY
-
-#if defined(STM32L0)
-#define RCC_IT_LSECSS RCC_IT_CSSLSE
-#define RCC_IT_CSS RCC_IT_CSSHSE
-#endif
-
-#define IS_RCC_MCOSOURCE IS_RCC_MCO1SOURCE
-#define __HAL_RCC_MCO_CONFIG __HAL_RCC_MCO1_CONFIG
-#define RCC_MCO_NODIV RCC_MCODIV_1
-#define RCC_MCO_DIV1 RCC_MCODIV_1
-#define RCC_MCO_DIV2 RCC_MCODIV_2
-#define RCC_MCO_DIV4 RCC_MCODIV_4
-#define RCC_MCO_DIV8 RCC_MCODIV_8
-#define RCC_MCO_DIV16 RCC_MCODIV_16
-#define RCC_MCO_DIV32 RCC_MCODIV_32
-#define RCC_MCO_DIV64 RCC_MCODIV_64
-#define RCC_MCO_DIV128 RCC_MCODIV_128
-#define RCC_MCOSOURCE_NONE RCC_MCO1SOURCE_NOCLOCK
-#define RCC_MCOSOURCE_LSI RCC_MCO1SOURCE_LSI
-#define RCC_MCOSOURCE_LSE RCC_MCO1SOURCE_LSE
-#define RCC_MCOSOURCE_SYSCLK RCC_MCO1SOURCE_SYSCLK
-#define RCC_MCOSOURCE_HSI RCC_MCO1SOURCE_HSI
-#define RCC_MCOSOURCE_HSI14 RCC_MCO1SOURCE_HSI14
-#define RCC_MCOSOURCE_HSI48 RCC_MCO1SOURCE_HSI48
-#define RCC_MCOSOURCE_HSE RCC_MCO1SOURCE_HSE
-#define RCC_MCOSOURCE_PLLCLK_DIV1 RCC_MCO1SOURCE_PLLCLK
-#define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK
-#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2
-
-#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK
-
-#define RCC_USBCLK_PLLSAI1 RCC_USBCLKSOURCE_PLLSAI1
-#define RCC_USBCLK_PLL RCC_USBCLKSOURCE_PLL
-#define RCC_USBCLK_MSI RCC_USBCLKSOURCE_MSI
-#define RCC_USBCLKSOURCE_PLLCLK RCC_USBCLKSOURCE_PLL
-#define RCC_USBPLLCLK_DIV1 RCC_USBCLKSOURCE_PLL
-#define RCC_USBPLLCLK_DIV1_5 RCC_USBCLKSOURCE_PLL_DIV1_5
-#define RCC_USBPLLCLK_DIV2 RCC_USBCLKSOURCE_PLL_DIV2
-#define RCC_USBPLLCLK_DIV3 RCC_USBCLKSOURCE_PLL_DIV3
-
-#define HSION_BitNumber RCC_HSION_BIT_NUMBER
-#define HSION_BITNUMBER RCC_HSION_BIT_NUMBER
-#define HSEON_BitNumber RCC_HSEON_BIT_NUMBER
-#define HSEON_BITNUMBER RCC_HSEON_BIT_NUMBER
-#define MSION_BITNUMBER RCC_MSION_BIT_NUMBER
-#define CSSON_BitNumber RCC_CSSON_BIT_NUMBER
-#define CSSON_BITNUMBER RCC_CSSON_BIT_NUMBER
-#define PLLON_BitNumber RCC_PLLON_BIT_NUMBER
-#define PLLON_BITNUMBER RCC_PLLON_BIT_NUMBER
-#define PLLI2SON_BitNumber RCC_PLLI2SON_BIT_NUMBER
-#define I2SSRC_BitNumber RCC_I2SSRC_BIT_NUMBER
-#define RTCEN_BitNumber RCC_RTCEN_BIT_NUMBER
-#define RTCEN_BITNUMBER RCC_RTCEN_BIT_NUMBER
-#define BDRST_BitNumber RCC_BDRST_BIT_NUMBER
-#define BDRST_BITNUMBER RCC_BDRST_BIT_NUMBER
-#define RTCRST_BITNUMBER RCC_RTCRST_BIT_NUMBER
-#define LSION_BitNumber RCC_LSION_BIT_NUMBER
-#define LSION_BITNUMBER RCC_LSION_BIT_NUMBER
-#define LSEON_BitNumber RCC_LSEON_BIT_NUMBER
-#define LSEON_BITNUMBER RCC_LSEON_BIT_NUMBER
-#define LSEBYP_BITNUMBER RCC_LSEBYP_BIT_NUMBER
-#define PLLSAION_BitNumber RCC_PLLSAION_BIT_NUMBER
-#define TIMPRE_BitNumber RCC_TIMPRE_BIT_NUMBER
-#define RMVF_BitNumber RCC_RMVF_BIT_NUMBER
-#define RMVF_BITNUMBER RCC_RMVF_BIT_NUMBER
-#define RCC_CR2_HSI14TRIM_BitNumber RCC_HSI14TRIM_BIT_NUMBER
-#define CR_BYTE2_ADDRESS RCC_CR_BYTE2_ADDRESS
-#define CIR_BYTE1_ADDRESS RCC_CIR_BYTE1_ADDRESS
-#define CIR_BYTE2_ADDRESS RCC_CIR_BYTE2_ADDRESS
-#define BDCR_BYTE0_ADDRESS RCC_BDCR_BYTE0_ADDRESS
-#define DBP_TIMEOUT_VALUE RCC_DBP_TIMEOUT_VALUE
-#define LSE_TIMEOUT_VALUE RCC_LSE_TIMEOUT_VALUE
-
-#define CR_HSION_BB RCC_CR_HSION_BB
-#define CR_CSSON_BB RCC_CR_CSSON_BB
-#define CR_PLLON_BB RCC_CR_PLLON_BB
-#define CR_PLLI2SON_BB RCC_CR_PLLI2SON_BB
-#define CR_MSION_BB RCC_CR_MSION_BB
-#define CSR_LSION_BB RCC_CSR_LSION_BB
-#define CSR_LSEON_BB RCC_CSR_LSEON_BB
-#define CSR_LSEBYP_BB RCC_CSR_LSEBYP_BB
-#define CSR_RTCEN_BB RCC_CSR_RTCEN_BB
-#define CSR_RTCRST_BB RCC_CSR_RTCRST_BB
-#define CFGR_I2SSRC_BB RCC_CFGR_I2SSRC_BB
-#define BDCR_RTCEN_BB RCC_BDCR_RTCEN_BB
-#define BDCR_BDRST_BB RCC_BDCR_BDRST_BB
-#define CR_HSEON_BB RCC_CR_HSEON_BB
-#define CSR_RMVF_BB RCC_CSR_RMVF_BB
-#define CR_PLLSAION_BB RCC_CR_PLLSAION_BB
-#define DCKCFGR_TIMPRE_BB RCC_DCKCFGR_TIMPRE_BB
-
-#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE
-#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE
-#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE
-#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE
-#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE __HAL_RCC_CRS_RELOADVALUE_CALCULATE
-
-#define __HAL_RCC_GET_IT_SOURCE __HAL_RCC_GET_IT
-
-#define RCC_CRS_SYNCWARM RCC_CRS_SYNCWARN
-#define RCC_CRS_TRIMOV RCC_CRS_TRIMOVF
-
-#define RCC_PERIPHCLK_CK48 RCC_PERIPHCLK_CLK48
-#define RCC_CK48CLKSOURCE_PLLQ RCC_CLK48CLKSOURCE_PLLQ
-#define RCC_CK48CLKSOURCE_PLLSAIP RCC_CLK48CLKSOURCE_PLLSAIP
-#define RCC_CK48CLKSOURCE_PLLI2SQ RCC_CLK48CLKSOURCE_PLLI2SQ
-#define IS_RCC_CK48CLKSOURCE IS_RCC_CLK48CLKSOURCE
-#define RCC_SDIOCLKSOURCE_CK48 RCC_SDIOCLKSOURCE_CLK48
-
-#define __HAL_RCC_DFSDM_CLK_ENABLE __HAL_RCC_DFSDM1_CLK_ENABLE
-#define __HAL_RCC_DFSDM_CLK_DISABLE __HAL_RCC_DFSDM1_CLK_DISABLE
-#define __HAL_RCC_DFSDM_IS_CLK_ENABLED __HAL_RCC_DFSDM1_IS_CLK_ENABLED
-#define __HAL_RCC_DFSDM_IS_CLK_DISABLED __HAL_RCC_DFSDM1_IS_CLK_DISABLED
-#define __HAL_RCC_DFSDM_FORCE_RESET __HAL_RCC_DFSDM1_FORCE_RESET
-#define __HAL_RCC_DFSDM_RELEASE_RESET __HAL_RCC_DFSDM1_RELEASE_RESET
-#define __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE
-#define __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE
-#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_ENABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED
-#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_DISABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED
-#define DfsdmClockSelection Dfsdm1ClockSelection
-#define RCC_PERIPHCLK_DFSDM RCC_PERIPHCLK_DFSDM1
-#define RCC_DFSDMCLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK
-#define RCC_DFSDMCLKSOURCE_SYSCLK RCC_DFSDM1CLKSOURCE_SYSCLK
-#define __HAL_RCC_DFSDM_CONFIG __HAL_RCC_DFSDM1_CONFIG
-#define __HAL_RCC_GET_DFSDM_SOURCE __HAL_RCC_GET_DFSDM1_SOURCE
-
-/**
- * @}
- */
-
-/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose
- * @{
- */
-#define HAL_RNG_ReadyCallback(__HANDLE__) HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit)
-
-/**
- * @}
- */
-
-/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG
-#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT
-#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT
-
-#if defined (STM32F1)
-#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_CLEAR_FLAG()
-
-#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_ENABLE_IT()
-
-#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_DISABLE_IT()
-
-#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GET_FLAG()
-
-#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GENERATE_SWIT()
-#else
-#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \
- (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()))
-#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \
- (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()))
-#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \
- (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()))
-#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \
- (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()))
-#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \
- (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()))
-#endif /* STM32F1 */
-
-#define IS_ALARM IS_RTC_ALARM
-#define IS_ALARM_MASK IS_RTC_ALARM_MASK
-#define IS_TAMPER IS_RTC_TAMPER
-#define IS_TAMPER_ERASE_MODE IS_RTC_TAMPER_ERASE_MODE
-#define IS_TAMPER_FILTER IS_RTC_TAMPER_FILTER
-#define IS_TAMPER_INTERRUPT IS_RTC_TAMPER_INTERRUPT
-#define IS_TAMPER_MASKFLAG_STATE IS_RTC_TAMPER_MASKFLAG_STATE
-#define IS_TAMPER_PRECHARGE_DURATION IS_RTC_TAMPER_PRECHARGE_DURATION
-#define IS_TAMPER_PULLUP_STATE IS_RTC_TAMPER_PULLUP_STATE
-#define IS_TAMPER_SAMPLING_FREQ IS_RTC_TAMPER_SAMPLING_FREQ
-#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION
-#define IS_TAMPER_TRIGGER IS_RTC_TAMPER_TRIGGER
-#define IS_WAKEUP_CLOCK IS_RTC_WAKEUP_CLOCK
-#define IS_WAKEUP_COUNTER IS_RTC_WAKEUP_COUNTER
-
-#define __RTC_WRITEPROTECTION_ENABLE __HAL_RTC_WRITEPROTECTION_ENABLE
-#define __RTC_WRITEPROTECTION_DISABLE __HAL_RTC_WRITEPROTECTION_DISABLE
-
-/**
- * @}
- */
-
-/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE
-#define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS
-
-#if defined(STM32F4)
-#define SD_SDMMC_DISABLED SD_SDIO_DISABLED
-#define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY
-#define SD_SDMMC_FUNCTION_FAILED SD_SDIO_FUNCTION_FAILED
-#define SD_SDMMC_UNKNOWN_FUNCTION SD_SDIO_UNKNOWN_FUNCTION
-#define SD_CMD_SDMMC_SEN_OP_COND SD_CMD_SDIO_SEN_OP_COND
-#define SD_CMD_SDMMC_RW_DIRECT SD_CMD_SDIO_RW_DIRECT
-#define SD_CMD_SDMMC_RW_EXTENDED SD_CMD_SDIO_RW_EXTENDED
-#define __HAL_SD_SDMMC_ENABLE __HAL_SD_SDIO_ENABLE
-#define __HAL_SD_SDMMC_DISABLE __HAL_SD_SDIO_DISABLE
-#define __HAL_SD_SDMMC_DMA_ENABLE __HAL_SD_SDIO_DMA_ENABLE
-#define __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL
-#define __HAL_SD_SDMMC_ENABLE_IT __HAL_SD_SDIO_ENABLE_IT
-#define __HAL_SD_SDMMC_DISABLE_IT __HAL_SD_SDIO_DISABLE_IT
-#define __HAL_SD_SDMMC_GET_FLAG __HAL_SD_SDIO_GET_FLAG
-#define __HAL_SD_SDMMC_CLEAR_FLAG __HAL_SD_SDIO_CLEAR_FLAG
-#define __HAL_SD_SDMMC_GET_IT __HAL_SD_SDIO_GET_IT
-#define __HAL_SD_SDMMC_CLEAR_IT __HAL_SD_SDIO_CLEAR_IT
-#define SDMMC_STATIC_FLAGS SDIO_STATIC_FLAGS
-#define SDMMC_CMD0TIMEOUT SDIO_CMD0TIMEOUT
-#define SD_SDMMC_SEND_IF_COND SD_SDIO_SEND_IF_COND
-/* alias CMSIS */
-#define SDMMC1_IRQn SDIO_IRQn
-#define SDMMC1_IRQHandler SDIO_IRQHandler
-#endif
-
-#if defined(STM32F7) || defined(STM32L4)
-#define SD_SDIO_DISABLED SD_SDMMC_DISABLED
-#define SD_SDIO_FUNCTION_BUSY SD_SDMMC_FUNCTION_BUSY
-#define SD_SDIO_FUNCTION_FAILED SD_SDMMC_FUNCTION_FAILED
-#define SD_SDIO_UNKNOWN_FUNCTION SD_SDMMC_UNKNOWN_FUNCTION
-#define SD_CMD_SDIO_SEN_OP_COND SD_CMD_SDMMC_SEN_OP_COND
-#define SD_CMD_SDIO_RW_DIRECT SD_CMD_SDMMC_RW_DIRECT
-#define SD_CMD_SDIO_RW_EXTENDED SD_CMD_SDMMC_RW_EXTENDED
-#define __HAL_SD_SDIO_ENABLE __HAL_SD_SDMMC_ENABLE
-#define __HAL_SD_SDIO_DISABLE __HAL_SD_SDMMC_DISABLE
-#define __HAL_SD_SDIO_DMA_ENABLE __HAL_SD_SDMMC_DMA_ENABLE
-#define __HAL_SD_SDIO_DMA_DISABL __HAL_SD_SDMMC_DMA_DISABLE
-#define __HAL_SD_SDIO_ENABLE_IT __HAL_SD_SDMMC_ENABLE_IT
-#define __HAL_SD_SDIO_DISABLE_IT __HAL_SD_SDMMC_DISABLE_IT
-#define __HAL_SD_SDIO_GET_FLAG __HAL_SD_SDMMC_GET_FLAG
-#define __HAL_SD_SDIO_CLEAR_FLAG __HAL_SD_SDMMC_CLEAR_FLAG
-#define __HAL_SD_SDIO_GET_IT __HAL_SD_SDMMC_GET_IT
-#define __HAL_SD_SDIO_CLEAR_IT __HAL_SD_SDMMC_CLEAR_IT
-#define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS
-#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT
-#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND
-/* alias CMSIS for compatibilities */
-#define SDIO_IRQn SDMMC1_IRQn
-#define SDIO_IRQHandler SDMMC1_IRQHandler
-#endif
-/**
- * @}
- */
-
-/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define __SMARTCARD_ENABLE_IT __HAL_SMARTCARD_ENABLE_IT
-#define __SMARTCARD_DISABLE_IT __HAL_SMARTCARD_DISABLE_IT
-#define __SMARTCARD_ENABLE __HAL_SMARTCARD_ENABLE
-#define __SMARTCARD_DISABLE __HAL_SMARTCARD_DISABLE
-#define __SMARTCARD_DMA_REQUEST_ENABLE __HAL_SMARTCARD_DMA_REQUEST_ENABLE
-#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE
-
-#define __HAL_SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE
-#define __SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE
-
-#define IS_SMARTCARD_ONEBIT_SAMPLING IS_SMARTCARD_ONE_BIT_SAMPLE
-
-/**
- * @}
- */
-
-/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose
- * @{
- */
-#define __HAL_SMBUS_RESET_CR1 SMBUS_RESET_CR1
-#define __HAL_SMBUS_RESET_CR2 SMBUS_RESET_CR2
-#define __HAL_SMBUS_GENERATE_START SMBUS_GENERATE_START
-#define __HAL_SMBUS_GET_ADDR_MATCH SMBUS_GET_ADDR_MATCH
-#define __HAL_SMBUS_GET_DIR SMBUS_GET_DIR
-#define __HAL_SMBUS_GET_STOP_MODE SMBUS_GET_STOP_MODE
-#define __HAL_SMBUS_GET_PEC_MODE SMBUS_GET_PEC_MODE
-#define __HAL_SMBUS_GET_ALERT_ENABLED SMBUS_GET_ALERT_ENABLED
-/**
- * @}
- */
-
-/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define __HAL_SPI_1LINE_TX SPI_1LINE_TX
-#define __HAL_SPI_1LINE_RX SPI_1LINE_RX
-#define __HAL_SPI_RESET_CRC SPI_RESET_CRC
-
-/**
- * @}
- */
-
-/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define __HAL_UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE
-#define __HAL_UART_MASK_COMPUTATION UART_MASK_COMPUTATION
-#define __UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE
-#define __UART_MASK_COMPUTATION UART_MASK_COMPUTATION
-
-#define IS_UART_WAKEUPMETHODE IS_UART_WAKEUPMETHOD
-
-#define IS_UART_ONEBIT_SAMPLE IS_UART_ONE_BIT_SAMPLE
-#define IS_UART_ONEBIT_SAMPLING IS_UART_ONE_BIT_SAMPLE
-
-/**
- * @}
- */
-
-
-/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define __USART_ENABLE_IT __HAL_USART_ENABLE_IT
-#define __USART_DISABLE_IT __HAL_USART_DISABLE_IT
-#define __USART_ENABLE __HAL_USART_ENABLE
-#define __USART_DISABLE __HAL_USART_DISABLE
-
-#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE
-#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE
-
-/**
- * @}
- */
-
-/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose
- * @{
- */
-#define USB_EXTI_LINE_WAKEUP USB_WAKEUP_EXTI_LINE
-
-#define USB_FS_EXTI_TRIGGER_RISING_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE
-#define USB_FS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE
-#define USB_FS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE
-#define USB_FS_EXTI_LINE_WAKEUP USB_OTG_FS_WAKEUP_EXTI_LINE
-
-#define USB_HS_EXTI_TRIGGER_RISING_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE
-#define USB_HS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE
-#define USB_HS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE
-#define USB_HS_EXTI_LINE_WAKEUP USB_OTG_HS_WAKEUP_EXTI_LINE
-
-#define __HAL_USB_EXTI_ENABLE_IT __HAL_USB_WAKEUP_EXTI_ENABLE_IT
-#define __HAL_USB_EXTI_DISABLE_IT __HAL_USB_WAKEUP_EXTI_DISABLE_IT
-#define __HAL_USB_EXTI_GET_FLAG __HAL_USB_WAKEUP_EXTI_GET_FLAG
-#define __HAL_USB_EXTI_CLEAR_FLAG __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG
-#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE
-#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE
-#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
-
-#define __HAL_USB_FS_EXTI_ENABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT
-#define __HAL_USB_FS_EXTI_DISABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT
-#define __HAL_USB_FS_EXTI_GET_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG
-#define __HAL_USB_FS_EXTI_CLEAR_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG
-#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE
-#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
-#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
-#define __HAL_USB_FS_EXTI_GENERATE_SWIT __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT
-
-#define __HAL_USB_HS_EXTI_ENABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT
-#define __HAL_USB_HS_EXTI_DISABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT
-#define __HAL_USB_HS_EXTI_GET_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG
-#define __HAL_USB_HS_EXTI_CLEAR_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG
-#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE
-#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
-#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
-#define __HAL_USB_HS_EXTI_GENERATE_SWIT __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT
-
-#define HAL_PCD_ActiveRemoteWakeup HAL_PCD_ActivateRemoteWakeup
-#define HAL_PCD_DeActiveRemoteWakeup HAL_PCD_DeActivateRemoteWakeup
-
-#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo
-#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo
-/**
- * @}
- */
-
-/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose
- * @{
- */
-#define __HAL_TIM_SetICPrescalerValue TIM_SET_ICPRESCALERVALUE
-#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE
-
-#define TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE
-#define TIM_GET_CLEAR_IT __HAL_TIM_CLEAR_IT
-
-#define __HAL_TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE
-
-#define __HAL_TIM_DIRECTION_STATUS __HAL_TIM_IS_TIM_COUNTING_DOWN
-#define __HAL_TIM_PRESCALER __HAL_TIM_SET_PRESCALER
-#define __HAL_TIM_SetCounter __HAL_TIM_SET_COUNTER
-#define __HAL_TIM_GetCounter __HAL_TIM_GET_COUNTER
-#define __HAL_TIM_SetAutoreload __HAL_TIM_SET_AUTORELOAD
-#define __HAL_TIM_GetAutoreload __HAL_TIM_GET_AUTORELOAD
-#define __HAL_TIM_SetClockDivision __HAL_TIM_SET_CLOCKDIVISION
-#define __HAL_TIM_GetClockDivision __HAL_TIM_GET_CLOCKDIVISION
-#define __HAL_TIM_SetICPrescaler __HAL_TIM_SET_ICPRESCALER
-#define __HAL_TIM_GetICPrescaler __HAL_TIM_GET_ICPRESCALER
-#define __HAL_TIM_SetCompare __HAL_TIM_SET_COMPARE
-#define __HAL_TIM_GetCompare __HAL_TIM_GET_COMPARE
-
-#define TIM_BREAKINPUTSOURCE_DFSDM TIM_BREAKINPUTSOURCE_DFSDM1
-/**
- * @}
- */
-
-/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define __HAL_ETH_EXTI_ENABLE_IT __HAL_ETH_WAKEUP_EXTI_ENABLE_IT
-#define __HAL_ETH_EXTI_DISABLE_IT __HAL_ETH_WAKEUP_EXTI_DISABLE_IT
-#define __HAL_ETH_EXTI_GET_FLAG __HAL_ETH_WAKEUP_EXTI_GET_FLAG
-#define __HAL_ETH_EXTI_CLEAR_FLAG __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG
-#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER
-#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER
-#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER
-
-#define ETH_PROMISCIOUSMODE_ENABLE ETH_PROMISCUOUS_MODE_ENABLE
-#define ETH_PROMISCIOUSMODE_DISABLE ETH_PROMISCUOUS_MODE_DISABLE
-#define IS_ETH_PROMISCIOUS_MODE IS_ETH_PROMISCUOUS_MODE
-/**
- * @}
- */
-
-/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose
- * @{
- */
-#define __HAL_LTDC_LAYER LTDC_LAYER
-/**
- * @}
- */
-
-/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose
- * @{
- */
-#define SAI_OUTPUTDRIVE_DISABLED SAI_OUTPUTDRIVE_DISABLE
-#define SAI_OUTPUTDRIVE_ENABLED SAI_OUTPUTDRIVE_ENABLE
-#define SAI_MASTERDIVIDER_ENABLED SAI_MASTERDIVIDER_ENABLE
-#define SAI_MASTERDIVIDER_DISABLED SAI_MASTERDIVIDER_DISABLE
-#define SAI_STREOMODE SAI_STEREOMODE
-#define SAI_FIFOStatus_Empty SAI_FIFOSTATUS_EMPTY
-#define SAI_FIFOStatus_Less1QuarterFull SAI_FIFOSTATUS_LESS1QUARTERFULL
-#define SAI_FIFOStatus_1QuarterFull SAI_FIFOSTATUS_1QUARTERFULL
-#define SAI_FIFOStatus_HalfFull SAI_FIFOSTATUS_HALFFULL
-#define SAI_FIFOStatus_3QuartersFull SAI_FIFOSTATUS_3QUARTERFULL
-#define SAI_FIFOStatus_Full SAI_FIFOSTATUS_FULL
-#define IS_SAI_BLOCK_MONO_STREO_MODE IS_SAI_BLOCK_MONO_STEREO_MODE
-#define SAI_SYNCHRONOUS_EXT SAI_SYNCHRONOUS_EXT_SAI1
-#define SAI_SYNCEXT_IN_ENABLE SAI_SYNCEXT_OUTBLOCKA_ENABLE
-/**
- * @}
- */
-
-
-/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose
- * @{
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* ___STM32_HAL_LEGACY */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
deleted file mode 100644
index 3b949f7..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
+++ /dev/null
@@ -1,328 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal.h
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief This file contains all the functions prototypes for the HAL
- * module driver.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F1xx_HAL_H
-#define __STM32F1xx_HAL_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal_conf.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup HAL
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/* Exported macro ------------------------------------------------------------*/
-
-/** @defgroup HAL_Exported_Macros HAL Exported Macros
- * @{
- */
-
-/** @defgroup DBGMCU_Freeze_Unfreeze Freeze Unfreeze Peripherals in Debug mode
- * @brief Freeze/Unfreeze Peripherals in Debug mode
- * Note: On devices STM32F10xx8 and STM32F10xxB,
- * STM32F101xC/D/E and STM32F103xC/D/E,
- * STM32F101xF/G and STM32F103xF/G
- * STM32F10xx4 and STM32F10xx6
- * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
- * debug mode (not accessible by the user software in normal mode).
- * Refer to errata sheet of these devices for more details.
- * @{
- */
-
-/* Peripherals on APB1 */
-/**
- * @brief TIM2 Peripherals Debug mode
- */
-#define __HAL_DBGMCU_FREEZE_TIM2() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM2_STOP)
-#define __HAL_DBGMCU_UNFREEZE_TIM2() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM2_STOP)
-
-/**
- * @brief TIM3 Peripherals Debug mode
- */
-#define __HAL_DBGMCU_FREEZE_TIM3() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM3_STOP)
-#define __HAL_DBGMCU_UNFREEZE_TIM3() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM3_STOP)
-
-#if defined (DBGMCU_CR_DBG_TIM4_STOP)
-/**
- * @brief TIM4 Peripherals Debug mode
- */
-#define __HAL_DBGMCU_FREEZE_TIM4() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM4_STOP)
-#define __HAL_DBGMCU_UNFREEZE_TIM4() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM4_STOP)
-#endif
-
-#if defined (DBGMCU_CR_DBG_TIM5_STOP)
-/**
- * @brief TIM5 Peripherals Debug mode
- */
-#define __HAL_DBGMCU_FREEZE_TIM5() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM5_STOP)
-#define __HAL_DBGMCU_UNFREEZE_TIM5() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM5_STOP)
-#endif
-
-#if defined (DBGMCU_CR_DBG_TIM6_STOP)
-/**
- * @brief TIM6 Peripherals Debug mode
- */
-#define __HAL_DBGMCU_FREEZE_TIM6() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM6_STOP)
-#define __HAL_DBGMCU_UNFREEZE_TIM6() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM6_STOP)
-#endif
-
-#if defined (DBGMCU_CR_DBG_TIM7_STOP)
-/**
- * @brief TIM7 Peripherals Debug mode
- */
-#define __HAL_DBGMCU_FREEZE_TIM7() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM7_STOP)
-#define __HAL_DBGMCU_UNFREEZE_TIM7() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM7_STOP)
-#endif
-
-#if defined (DBGMCU_CR_DBG_TIM12_STOP)
-/**
- * @brief TIM12 Peripherals Debug mode
- */
-#define __HAL_DBGMCU_FREEZE_TIM12() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM12_STOP)
-#define __HAL_DBGMCU_UNFREEZE_TIM12() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM12_STOP)
-#endif
-
-#if defined (DBGMCU_CR_DBG_TIM13_STOP)
-/**
- * @brief TIM13 Peripherals Debug mode
- */
-#define __HAL_DBGMCU_FREEZE_TIM13() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM13_STOP)
-#define __HAL_DBGMCU_UNFREEZE_TIM13() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM13_STOP)
-#endif
-
-#if defined (DBGMCU_CR_DBG_TIM14_STOP)
-/**
- * @brief TIM14 Peripherals Debug mode
- */
-#define __HAL_DBGMCU_FREEZE_TIM14() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM14_STOP)
-#define __HAL_DBGMCU_UNFREEZE_TIM14() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM14_STOP)
-#endif
-
-/**
- * @brief WWDG Peripherals Debug mode
- */
-#define __HAL_DBGMCU_FREEZE_WWDG() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_WWDG_STOP)
-#define __HAL_DBGMCU_UNFREEZE_WWDG() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_WWDG_STOP)
-
-/**
- * @brief IWDG Peripherals Debug mode
- */
-#define __HAL_DBGMCU_FREEZE_IWDG() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_IWDG_STOP)
-#define __HAL_DBGMCU_UNFREEZE_IWDG() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_IWDG_STOP)
-
-/**
- * @brief I2C1 Peripherals Debug mode
- */
-#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT)
-#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT)
-
-#if defined (DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT)
-/**
- * @brief I2C2 Peripherals Debug mode
- */
-#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT)
-#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT)
-#endif
-
-#if defined (DBGMCU_CR_DBG_CAN1_STOP)
-/**
- * @brief CAN1 Peripherals Debug mode
- */
-#define __HAL_DBGMCU_FREEZE_CAN1() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN1_STOP)
-#define __HAL_DBGMCU_UNFREEZE_CAN1() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN1_STOP)
-#endif
-
-#if defined (DBGMCU_CR_DBG_CAN2_STOP)
-/**
- * @brief CAN2 Peripherals Debug mode
- */
-#define __HAL_DBGMCU_FREEZE_CAN2() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN2_STOP)
-#define __HAL_DBGMCU_UNFREEZE_CAN2() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN2_STOP)
-#endif
-
-/* Peripherals on APB2 */
-#if defined (DBGMCU_CR_DBG_TIM1_STOP)
-/**
- * @brief TIM1 Peripherals Debug mode
- */
-#define __HAL_DBGMCU_FREEZE_TIM1() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM1_STOP)
-#define __HAL_DBGMCU_UNFREEZE_TIM1() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM1_STOP)
-#endif
-
-#if defined (DBGMCU_CR_DBG_TIM8_STOP)
-/**
- * @brief TIM8 Peripherals Debug mode
- */
-#define __HAL_DBGMCU_FREEZE_TIM8() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM8_STOP)
-#define __HAL_DBGMCU_UNFREEZE_TIM8() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM8_STOP)
-#endif
-
-#if defined (DBGMCU_CR_DBG_TIM9_STOP)
-/**
- * @brief TIM9 Peripherals Debug mode
- */
-#define __HAL_DBGMCU_FREEZE_TIM9() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM9_STOP)
-#define __HAL_DBGMCU_UNFREEZE_TIM9() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM9_STOP)
-#endif
-
-#if defined (DBGMCU_CR_DBG_TIM10_STOP)
-/**
- * @brief TIM10 Peripherals Debug mode
- */
-#define __HAL_DBGMCU_FREEZE_TIM10() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM10_STOP)
-#define __HAL_DBGMCU_UNFREEZE_TIM10() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM10_STOP)
-#endif
-
-#if defined (DBGMCU_CR_DBG_TIM11_STOP)
-/**
- * @brief TIM11 Peripherals Debug mode
- */
-#define __HAL_DBGMCU_FREEZE_TIM11() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM11_STOP)
-#define __HAL_DBGMCU_UNFREEZE_TIM11() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM11_STOP)
-#endif
-
-
-#if defined (DBGMCU_CR_DBG_TIM15_STOP)
-/**
- * @brief TIM15 Peripherals Debug mode
- */
-#define __HAL_DBGMCU_FREEZE_TIM15() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM15_STOP)
-#define __HAL_DBGMCU_UNFREEZE_TIM15() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM15_STOP)
-#endif
-
-#if defined (DBGMCU_CR_DBG_TIM16_STOP)
-/**
- * @brief TIM16 Peripherals Debug mode
- */
-#define __HAL_DBGMCU_FREEZE_TIM16() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM16_STOP)
-#define __HAL_DBGMCU_UNFREEZE_TIM16() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM16_STOP)
-#endif
-
-#if defined (DBGMCU_CR_DBG_TIM17_STOP)
-/**
- * @brief TIM17 Peripherals Debug mode
- */
-#define __HAL_DBGMCU_FREEZE_TIM17() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM17_STOP)
-#define __HAL_DBGMCU_UNFREEZE_TIM17() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM17_STOP)
-#endif
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-
-/** @addtogroup HAL_Exported_Functions
- * @{
- */
-
-/** @addtogroup HAL_Exported_Functions_Group1
- * @{
- */
-
-/* Initialization and de-initialization functions ******************************/
-HAL_StatusTypeDef HAL_Init(void);
-HAL_StatusTypeDef HAL_DeInit(void);
-void HAL_MspInit(void);
-void HAL_MspDeInit(void);
-HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
-
-/**
- * @}
- */
-
-/** @addtogroup HAL_Exported_Functions_Group2
- * @{
- */
-
-/* Peripheral Control functions ************************************************/
-void HAL_IncTick(void);
-void HAL_Delay(__IO uint32_t Delay);
-uint32_t HAL_GetTick(void);
-void HAL_SuspendTick(void);
-void HAL_ResumeTick(void);
-uint32_t HAL_GetHalVersion(void);
-uint32_t HAL_GetREVID(void);
-uint32_t HAL_GetDEVID(void);
-void HAL_DBGMCU_EnableDBGSleepMode(void);
-void HAL_DBGMCU_DisableDBGSleepMode(void);
-void HAL_DBGMCU_EnableDBGStopMode(void);
-void HAL_DBGMCU_DisableDBGStopMode(void);
-void HAL_DBGMCU_EnableDBGStandbyMode(void);
-void HAL_DBGMCU_DisableDBGStandbyMode(void);
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F1xx_HAL_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h
deleted file mode 100644
index d2ee169..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h
+++ /dev/null
@@ -1,476 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_cortex.h
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief Header file of CORTEX HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F1xx_HAL_CORTEX_H
-#define __STM32F1xx_HAL_CORTEX_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal_def.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup CORTEX
- * @{
- */
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup CORTEX_Exported_Types Cortex Exported Types
- * @{
- */
-
-#if (__MPU_PRESENT == 1)
-/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition
- * @brief MPU Region initialization structure
- * @{
- */
-typedef struct
-{
- uint8_t Enable; /*!< Specifies the status of the region.
- This parameter can be a value of @ref CORTEX_MPU_Region_Enable */
- uint8_t Number; /*!< Specifies the number of the region to protect.
- This parameter can be a value of @ref CORTEX_MPU_Region_Number */
- uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */
- uint8_t Size; /*!< Specifies the size of the region to protect.
- This parameter can be a value of @ref CORTEX_MPU_Region_Size */
- uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable.
- This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */
- uint8_t TypeExtField; /*!< Specifies the TEX field level.
- This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */
- uint8_t AccessPermission; /*!< Specifies the region access permission type.
- This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */
- uint8_t DisableExec; /*!< Specifies the instruction access status.
- This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */
- uint8_t IsShareable; /*!< Specifies the shareability status of the protected region.
- This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */
- uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected.
- This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */
- uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region.
- This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */
-}MPU_Region_InitTypeDef;
-/**
- * @}
- */
-#endif /* __MPU_PRESENT */
-
-/**
- * @}
- */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
- * @{
- */
-
-
-/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group
- * @{
- */
-
-#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007) /*!< 0 bits for pre-emption priority
- 4 bits for subpriority */
-#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006) /*!< 1 bits for pre-emption priority
- 3 bits for subpriority */
-#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority
- 2 bits for subpriority */
-#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority
- 1 bits for subpriority */
-#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority
- 0 bits for subpriority */
-/**
- * @}
- */
-
-/** @defgroup CORTEX_SysTick_clock_source CORTEX SysTick clock source
- * @{
- */
-#define SYSTICK_CLKSOURCE_HCLK_DIV8 ((uint32_t)0x00000000)
-#define SYSTICK_CLKSOURCE_HCLK ((uint32_t)0x00000004)
-
-/**
- * @}
- */
-
-#if (__MPU_PRESENT == 1)
-/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control
- * @{
- */
-#define MPU_HFNMI_PRIVDEF_NONE ((uint32_t)0x00000000)
-#define MPU_HARDFAULT_NMI ((uint32_t)0x00000002)
-#define MPU_PRIVILEGED_DEFAULT ((uint32_t)0x00000004)
-#define MPU_HFNMI_PRIVDEF ((uint32_t)0x00000006)
-/**
- * @}
- */
-
-/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable
- * @{
- */
-#define MPU_REGION_ENABLE ((uint8_t)0x01)
-#define MPU_REGION_DISABLE ((uint8_t)0x00)
-/**
- * @}
- */
-
-/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access
- * @{
- */
-#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00)
-#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01)
-/**
- * @}
- */
-
-/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable
- * @{
- */
-#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01)
-#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00)
-/**
- * @}
- */
-
-/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable
- * @{
- */
-#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01)
-#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00)
-/**
- * @}
- */
-
-/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable
- * @{
- */
-#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01)
-#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00)
-/**
- * @}
- */
-
-/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels
- * @{
- */
-#define MPU_TEX_LEVEL0 ((uint8_t)0x00)
-#define MPU_TEX_LEVEL1 ((uint8_t)0x01)
-#define MPU_TEX_LEVEL2 ((uint8_t)0x02)
-/**
- * @}
- */
-
-/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size
- * @{
- */
-#define MPU_REGION_SIZE_32B ((uint8_t)0x04)
-#define MPU_REGION_SIZE_64B ((uint8_t)0x05)
-#define MPU_REGION_SIZE_128B ((uint8_t)0x06)
-#define MPU_REGION_SIZE_256B ((uint8_t)0x07)
-#define MPU_REGION_SIZE_512B ((uint8_t)0x08)
-#define MPU_REGION_SIZE_1KB ((uint8_t)0x09)
-#define MPU_REGION_SIZE_2KB ((uint8_t)0x0A)
-#define MPU_REGION_SIZE_4KB ((uint8_t)0x0B)
-#define MPU_REGION_SIZE_8KB ((uint8_t)0x0C)
-#define MPU_REGION_SIZE_16KB ((uint8_t)0x0D)
-#define MPU_REGION_SIZE_32KB ((uint8_t)0x0E)
-#define MPU_REGION_SIZE_64KB ((uint8_t)0x0F)
-#define MPU_REGION_SIZE_128KB ((uint8_t)0x10)
-#define MPU_REGION_SIZE_256KB ((uint8_t)0x11)
-#define MPU_REGION_SIZE_512KB ((uint8_t)0x12)
-#define MPU_REGION_SIZE_1MB ((uint8_t)0x13)
-#define MPU_REGION_SIZE_2MB ((uint8_t)0x14)
-#define MPU_REGION_SIZE_4MB ((uint8_t)0x15)
-#define MPU_REGION_SIZE_8MB ((uint8_t)0x16)
-#define MPU_REGION_SIZE_16MB ((uint8_t)0x17)
-#define MPU_REGION_SIZE_32MB ((uint8_t)0x18)
-#define MPU_REGION_SIZE_64MB ((uint8_t)0x19)
-#define MPU_REGION_SIZE_128MB ((uint8_t)0x1A)
-#define MPU_REGION_SIZE_256MB ((uint8_t)0x1B)
-#define MPU_REGION_SIZE_512MB ((uint8_t)0x1C)
-#define MPU_REGION_SIZE_1GB ((uint8_t)0x1D)
-#define MPU_REGION_SIZE_2GB ((uint8_t)0x1E)
-#define MPU_REGION_SIZE_4GB ((uint8_t)0x1F)
-/**
- * @}
- */
-
-/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes
- * @{
- */
-#define MPU_REGION_NO_ACCESS ((uint8_t)0x00)
-#define MPU_REGION_PRIV_RW ((uint8_t)0x01)
-#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02)
-#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03)
-#define MPU_REGION_PRIV_RO ((uint8_t)0x05)
-#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06)
-/**
- * @}
- */
-
-/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number
- * @{
- */
-#define MPU_REGION_NUMBER0 ((uint8_t)0x00)
-#define MPU_REGION_NUMBER1 ((uint8_t)0x01)
-#define MPU_REGION_NUMBER2 ((uint8_t)0x02)
-#define MPU_REGION_NUMBER3 ((uint8_t)0x03)
-#define MPU_REGION_NUMBER4 ((uint8_t)0x04)
-#define MPU_REGION_NUMBER5 ((uint8_t)0x05)
-#define MPU_REGION_NUMBER6 ((uint8_t)0x06)
-#define MPU_REGION_NUMBER7 ((uint8_t)0x07)
-/**
- * @}
- */
-#endif /* __MPU_PRESENT */
-
-/**
- * @}
- */
-
-
-/* Private macro -------------------------------------------------------------*/
-/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
- * @{
- */
-
-/** @defgroup CORTEX_Preemption_Priority_Group_Macro CORTEX Preemption Priority Group
- * @{
- */
-#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
- ((GROUP) == NVIC_PRIORITYGROUP_1) || \
- ((GROUP) == NVIC_PRIORITYGROUP_2) || \
- ((GROUP) == NVIC_PRIORITYGROUP_3) || \
- ((GROUP) == NVIC_PRIORITYGROUP_4))
-
-#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
-
-#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
-
-#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= 0x00)
-
-/**
- * @}
- */
-
-/** @defgroup CORTEX_SysTick_clock_source_Macro_Private CORTEX SysTick clock source
- * @{
- */
-#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
- ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
-/**
- * @}
- */
-#if (__MPU_PRESENT == 1)
-#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \
- ((STATE) == MPU_REGION_DISABLE))
-
-#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \
- ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE))
-
-#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \
- ((STATE) == MPU_ACCESS_NOT_SHAREABLE))
-
-#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \
- ((STATE) == MPU_ACCESS_NOT_CACHEABLE))
-
-#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \
- ((STATE) == MPU_ACCESS_NOT_BUFFERABLE))
-
-#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \
- ((TYPE) == MPU_TEX_LEVEL1) || \
- ((TYPE) == MPU_TEX_LEVEL2))
-
-#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \
- ((TYPE) == MPU_REGION_PRIV_RW) || \
- ((TYPE) == MPU_REGION_PRIV_RW_URO) || \
- ((TYPE) == MPU_REGION_FULL_ACCESS) || \
- ((TYPE) == MPU_REGION_PRIV_RO) || \
- ((TYPE) == MPU_REGION_PRIV_RO_URO))
-
-#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \
- ((NUMBER) == MPU_REGION_NUMBER1) || \
- ((NUMBER) == MPU_REGION_NUMBER2) || \
- ((NUMBER) == MPU_REGION_NUMBER3) || \
- ((NUMBER) == MPU_REGION_NUMBER4) || \
- ((NUMBER) == MPU_REGION_NUMBER5) || \
- ((NUMBER) == MPU_REGION_NUMBER6) || \
- ((NUMBER) == MPU_REGION_NUMBER7))
-
-#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \
- ((SIZE) == MPU_REGION_SIZE_64B) || \
- ((SIZE) == MPU_REGION_SIZE_128B) || \
- ((SIZE) == MPU_REGION_SIZE_256B) || \
- ((SIZE) == MPU_REGION_SIZE_512B) || \
- ((SIZE) == MPU_REGION_SIZE_1KB) || \
- ((SIZE) == MPU_REGION_SIZE_2KB) || \
- ((SIZE) == MPU_REGION_SIZE_4KB) || \
- ((SIZE) == MPU_REGION_SIZE_8KB) || \
- ((SIZE) == MPU_REGION_SIZE_16KB) || \
- ((SIZE) == MPU_REGION_SIZE_32KB) || \
- ((SIZE) == MPU_REGION_SIZE_64KB) || \
- ((SIZE) == MPU_REGION_SIZE_128KB) || \
- ((SIZE) == MPU_REGION_SIZE_256KB) || \
- ((SIZE) == MPU_REGION_SIZE_512KB) || \
- ((SIZE) == MPU_REGION_SIZE_1MB) || \
- ((SIZE) == MPU_REGION_SIZE_2MB) || \
- ((SIZE) == MPU_REGION_SIZE_4MB) || \
- ((SIZE) == MPU_REGION_SIZE_8MB) || \
- ((SIZE) == MPU_REGION_SIZE_16MB) || \
- ((SIZE) == MPU_REGION_SIZE_32MB) || \
- ((SIZE) == MPU_REGION_SIZE_64MB) || \
- ((SIZE) == MPU_REGION_SIZE_128MB) || \
- ((SIZE) == MPU_REGION_SIZE_256MB) || \
- ((SIZE) == MPU_REGION_SIZE_512MB) || \
- ((SIZE) == MPU_REGION_SIZE_1GB) || \
- ((SIZE) == MPU_REGION_SIZE_2GB) || \
- ((SIZE) == MPU_REGION_SIZE_4GB))
-
-#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FF)
-#endif /* __MPU_PRESENT */
-
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup CORTEX_Exported_Functions
- * @{
- */
-
-/** @addtogroup CORTEX_Exported_Functions_Group1
- * @{
- */
-/* Initialization and de-initialization functions *****************************/
-void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
-void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
-void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
-void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
-void HAL_NVIC_SystemReset(void);
-uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
-/**
- * @}
- */
-
-/** @addtogroup CORTEX_Exported_Functions_Group2
- * @{
- */
-/* Peripheral Control functions ***********************************************/
-#if (__MPU_PRESENT == 1)
-void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init);
-#endif /* __MPU_PRESENT */
-uint32_t HAL_NVIC_GetPriorityGrouping(void);
-void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority);
-uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
-void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
-void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
-uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
-void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
-void HAL_SYSTICK_IRQHandler(void);
-void HAL_SYSTICK_Callback(void);
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Private functions ---------------------------------------------------------*/
-/** @defgroup CORTEX_Private_Functions CORTEX Private Functions
- * @brief CORTEX private functions
- * @{
- */
-
-#if (__MPU_PRESENT == 1)
-/**
- * @brief Disables the MPU
- * @retval None
- */
-__STATIC_INLINE void HAL_MPU_Disable(void)
-{
- /* Disable fault exceptions */
- SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
-
- /* Disable the MPU */
- MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk;
-}
-
-/**
- * @brief Enables the MPU
- * @param MPU_Control: Specifies the control mode of the MPU during hard fault,
- * NMI, FAULTMASK and privileged accessto the default memory
- * This parameter can be one of the following values:
- * @arg MPU_HFNMI_PRIVDEF_NONE
- * @arg MPU_HARDFAULT_NMI
- * @arg MPU_PRIVILEGED_DEFAULT
- * @arg MPU_HFNMI_PRIVDEF
- * @retval None
- */
-__STATIC_INLINE void HAL_MPU_Enable(uint32_t MPU_Control)
-{
- /* Enable the MPU */
- MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
-
- /* Enable fault exceptions */
- SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
-}
-#endif /* __MPU_PRESENT */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F1xx_HAL_CORTEX_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h
deleted file mode 100644
index 8600be2..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h
+++ /dev/null
@@ -1,214 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_def.h
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief This file contains HAL common defines, enumeration, macros and
- * structures definitions.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F1xx_HAL_DEF
-#define __STM32F1xx_HAL_DEF
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx.h"
-#include "Legacy/stm32_hal_legacy.h"
-#include <stdio.h>
-
-/* Exported types ------------------------------------------------------------*/
-
-/**
- * @brief HAL Status structures definition
- */
-typedef enum
-{
- HAL_OK = 0x00,
- HAL_ERROR = 0x01,
- HAL_BUSY = 0x02,
- HAL_TIMEOUT = 0x03
-} HAL_StatusTypeDef;
-
-/**
- * @brief HAL Lock structures definition
- */
-typedef enum
-{
- HAL_UNLOCKED = 0x00,
- HAL_LOCKED = 0x01
-} HAL_LockTypeDef;
-
-/* Exported macro ------------------------------------------------------------*/
-
-#define HAL_MAX_DELAY 0xFFFFFFFF
-
-#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) != RESET)
-#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == RESET)
-
-#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD_, __DMA_HANDLE_) \
- do{ \
- (__HANDLE__)->__PPP_DMA_FIELD_ = &(__DMA_HANDLE_); \
- (__DMA_HANDLE_).Parent = (__HANDLE__); \
- } while(0)
-
-#define UNUSED(x) ((void)(x))
-
-/** @brief Reset the Handle's State field.
- * @param __HANDLE__: specifies the Peripheral Handle.
- * @note This macro can be used for the following purpose:
- * - When the Handle is declared as local variable; before passing it as parameter
- * to HAL_PPP_Init() for the first time, it is mandatory to use this macro
- * to set to 0 the Handle's "State" field.
- * Otherwise, "State" field may have any random value and the first time the function
- * HAL_PPP_Init() is called, the low level hardware initialization will be missed
- * (i.e. HAL_PPP_MspInit() will not be executed).
- * - When there is a need to reconfigure the low level hardware: instead of calling
- * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
- * In this later function, when the Handle's "State" field is set to 0, it will execute the function
- * HAL_PPP_MspInit() which will reconfigure the low level hardware.
- * @retval None
- */
-#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0)
-
-#if (USE_RTOS == 1)
- #error " USE_RTOS should be 0 in the current HAL release "
-#else
- #define __HAL_LOCK(__HANDLE__) \
- do{ \
- if((__HANDLE__)->Lock == HAL_LOCKED) \
- { \
- return HAL_BUSY; \
- } \
- else \
- { \
- (__HANDLE__)->Lock = HAL_LOCKED; \
- } \
- }while (0)
-
- #define __HAL_UNLOCK(__HANDLE__) \
- do{ \
- (__HANDLE__)->Lock = HAL_UNLOCKED; \
- }while (0)
-#endif /* USE_RTOS */
-
-#if defined ( __GNUC__ )
- #ifndef __weak
- #define __weak __attribute__((weak))
- #endif /* __weak */
- #ifndef __packed
- #define __packed __attribute__((__packed__))
- #endif /* __packed */
-#endif /* __GNUC__ */
-
-
-/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
-#if defined (__GNUC__) /* GNU Compiler */
- #ifndef __ALIGN_END
- #define __ALIGN_END __attribute__ ((aligned (4)))
- #endif /* __ALIGN_END */
- #ifndef __ALIGN_BEGIN
- #define __ALIGN_BEGIN
- #endif /* __ALIGN_BEGIN */
-#else
- #ifndef __ALIGN_END
- #define __ALIGN_END
- #endif /* __ALIGN_END */
- #ifndef __ALIGN_BEGIN
- #if defined (__CC_ARM) /* ARM Compiler */
- #define __ALIGN_BEGIN __align(4)
- #elif defined (__ICCARM__) /* IAR Compiler */
- #define __ALIGN_BEGIN
- #endif /* __CC_ARM */
- #endif /* __ALIGN_BEGIN */
-#endif /* __GNUC__ */
-
-/**
- * @brief __RAM_FUNC definition
- */
-#if defined ( __CC_ARM )
-/* ARM Compiler
- ------------
- RAM functions are defined using the toolchain options.
- Functions that are executed in RAM should reside in a separate source module.
- Using the 'Options for File' dialog you can simply change the 'Code / Const'
- area of a module to a memory space in physical RAM.
- Available memory areas are declared in the 'Target' tab of the 'Options for Target'
- dialog.
-*/
-#define __RAM_FUNC HAL_StatusTypeDef
-
-#elif defined ( __ICCARM__ )
-/* ICCARM Compiler
- ---------------
- RAM functions are defined using a specific toolchain keyword "__ramfunc".
-*/
-#define __RAM_FUNC __ramfunc HAL_StatusTypeDef
-
-#elif defined ( __GNUC__ )
-/* GNU Compiler
- ------------
- RAM functions are defined using a specific toolchain attribute
- "__attribute__((section(".RamFunc")))".
-*/
-#define __RAM_FUNC HAL_StatusTypeDef __attribute__((section(".RamFunc")))
-
-#endif
-
-/**
- * @brief __NOINLINE definition
- */
-#if defined ( __CC_ARM ) || defined ( __GNUC__ )
-/* ARM & GNUCompiler
- ----------------
-*/
-#define __NOINLINE __attribute__ ( (noinline) )
-
-#elif defined ( __ICCARM__ )
-/* ICCARM Compiler
- ---------------
-*/
-#define __NOINLINE _Pragma("optimize = no_inline")
-
-#endif
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* ___STM32F1xx_HAL_DEF */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h
deleted file mode 100644
index d26fd60..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h
+++ /dev/null
@@ -1,480 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_dma.h
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief Header file of DMA HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F1xx_HAL_DMA_H
-#define __STM32F1xx_HAL_DMA_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal_def.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup DMA
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-
-/** @defgroup DMA_Exported_Types DMA Exported Types
- * @{
- */
-
-/**
- * @brief DMA Configuration Structure definition
- */
-typedef struct
-{
- uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
- from memory to memory or from peripheral to memory.
- This parameter can be a value of @ref DMA_Data_transfer_direction */
-
- uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not.
- This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
-
- uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not.
- This parameter can be a value of @ref DMA_Memory_incremented_mode */
-
- uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width.
- This parameter can be a value of @ref DMA_Peripheral_data_size */
-
- uint32_t MemDataAlignment; /*!< Specifies the Memory data width.
- This parameter can be a value of @ref DMA_Memory_data_size */
-
- uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx.
- This parameter can be a value of @ref DMA_mode
- @note The circular buffer mode cannot be used if the memory-to-memory
- data transfer is configured on the selected Channel */
-
- uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx.
- This parameter can be a value of @ref DMA_Priority_level */
-} DMA_InitTypeDef;
-
-/**
- * @brief DMA Configuration enumeration values definition
- */
-typedef enum
-{
- DMA_MODE = 0, /*!< Control related DMA mode Parameter in DMA_InitTypeDef */
- DMA_PRIORITY = 1, /*!< Control related priority level Parameter in DMA_InitTypeDef */
-
-} DMA_ControlTypeDef;
-
-/**
- * @brief HAL DMA State structures definition
- */
-typedef enum
-{
- HAL_DMA_STATE_RESET = 0x00, /*!< DMA not yet initialized or disabled */
- HAL_DMA_STATE_READY = 0x01, /*!< DMA initialized and ready for use */
- HAL_DMA_STATE_READY_HALF = 0x11, /*!< DMA Half process success */
- HAL_DMA_STATE_BUSY = 0x02, /*!< DMA process is ongoing */
- HAL_DMA_STATE_TIMEOUT = 0x03, /*!< DMA timeout state */
- HAL_DMA_STATE_ERROR = 0x04, /*!< DMA error state */
-}HAL_DMA_StateTypeDef;
-
-/**
- * @brief HAL DMA Error Code structure definition
- */
-typedef enum
-{
- HAL_DMA_FULL_TRANSFER = 0x00, /*!< Full transfer */
- HAL_DMA_HALF_TRANSFER = 0x01, /*!< Half Transfer */
-}HAL_DMA_LevelCompleteTypeDef;
-
-/**
- * @brief DMA handle Structure definition
- */
-typedef struct __DMA_HandleTypeDef
-{
- DMA_Channel_TypeDef *Instance; /*!< Register base address */
-
- DMA_InitTypeDef Init; /*!< DMA communication parameters */
-
- HAL_LockTypeDef Lock; /*!< DMA locking object */
-
- HAL_DMA_StateTypeDef State; /*!< DMA transfer state */
-
- void *Parent; /*!< Parent object state */
-
- void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */
-
- void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */
-
- void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */
-
- __IO uint32_t ErrorCode; /*!< DMA Error code */
-} DMA_HandleTypeDef;
-/**
- * @}
- */
-
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup DMA_Exported_Constants DMA Exported Constants
- * @{
- */
-
-/** @defgroup DMA_Error_Code DMA Error Code
- * @{
- */
- #define HAL_DMA_ERROR_NONE ((uint32_t)0x00) /*!< No error */
- #define HAL_DMA_ERROR_TE ((uint32_t)0x01) /*!< Transfer error */
- #define HAL_DMA_ERROR_TIMEOUT ((uint32_t)0x20) /*!< Timeout error */
-
-/**
- * @}
- */
-
-/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction
- * @{
- */
-#define DMA_PERIPH_TO_MEMORY ((uint32_t)0x00000000) /*!< Peripheral to memory direction */
-#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_CCR_DIR) /*!< Memory to peripheral direction */
-#define DMA_MEMORY_TO_MEMORY ((uint32_t)DMA_CCR_MEM2MEM) /*!< Memory to memory direction */
-
-/**
- * @}
- */
-
-/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode
- * @{
- */
-#define DMA_PINC_ENABLE ((uint32_t)DMA_CCR_PINC) /*!< Peripheral increment mode Enable */
-#define DMA_PINC_DISABLE ((uint32_t)0x00000000) /*!< Peripheral increment mode Disable */
-/**
- * @}
- */
-
-/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode
- * @{
- */
-#define DMA_MINC_ENABLE ((uint32_t)DMA_CCR_MINC) /*!< Memory increment mode Enable */
-#define DMA_MINC_DISABLE ((uint32_t)0x00000000) /*!< Memory increment mode Disable */
-/**
- * @}
- */
-
-/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size
- * @{
- */
-#define DMA_PDATAALIGN_BYTE ((uint32_t)0x00000000) /*!< Peripheral data alignment: Byte */
-#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_PSIZE_0) /*!< Peripheral data alignment: HalfWord */
-#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_CCR_PSIZE_1) /*!< Peripheral data alignment: Word */
-/**
- * @}
- */
-
-/** @defgroup DMA_Memory_data_size DMA Memory data size
- * @{
- */
-#define DMA_MDATAALIGN_BYTE ((uint32_t)0x00000000) /*!< Memory data alignment: Byte */
-#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_MSIZE_0) /*!< Memory data alignment: HalfWord */
-#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_CCR_MSIZE_1) /*!< Memory data alignment: Word */
-/**
- * @}
- */
-
-/** @defgroup DMA_mode DMA mode
- * @{
- */
-#define DMA_NORMAL ((uint32_t)0x00000000) /*!< Normal mode */
-#define DMA_CIRCULAR ((uint32_t)DMA_CCR_CIRC) /*!< Circular mode */
-/**
- * @}
- */
-
-/** @defgroup DMA_Priority_level DMA Priority level
- * @{
- */
-#define DMA_PRIORITY_LOW ((uint32_t)0x00000000) /*!< Priority level : Low */
-#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_CCR_PL_0) /*!< Priority level : Medium */
-#define DMA_PRIORITY_HIGH ((uint32_t)DMA_CCR_PL_1) /*!< Priority level : High */
-#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_CCR_PL) /*!< Priority level : Very_High */
-/**
- * @}
- */
-
-
-/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions
- * @{
- */
-#define DMA_IT_TC ((uint32_t)DMA_CCR_TCIE)
-#define DMA_IT_HT ((uint32_t)DMA_CCR_HTIE)
-#define DMA_IT_TE ((uint32_t)DMA_CCR_TEIE)
-/**
- * @}
- */
-
-/** @defgroup DMA_flag_definitions DMA flag definitions
- * @{
- */
-#define DMA_FLAG_GL1 ((uint32_t)0x00000001)
-#define DMA_FLAG_TC1 ((uint32_t)0x00000002)
-#define DMA_FLAG_HT1 ((uint32_t)0x00000004)
-#define DMA_FLAG_TE1 ((uint32_t)0x00000008)
-#define DMA_FLAG_GL2 ((uint32_t)0x00000010)
-#define DMA_FLAG_TC2 ((uint32_t)0x00000020)
-#define DMA_FLAG_HT2 ((uint32_t)0x00000040)
-#define DMA_FLAG_TE2 ((uint32_t)0x00000080)
-#define DMA_FLAG_GL3 ((uint32_t)0x00000100)
-#define DMA_FLAG_TC3 ((uint32_t)0x00000200)
-#define DMA_FLAG_HT3 ((uint32_t)0x00000400)
-#define DMA_FLAG_TE3 ((uint32_t)0x00000800)
-#define DMA_FLAG_GL4 ((uint32_t)0x00001000)
-#define DMA_FLAG_TC4 ((uint32_t)0x00002000)
-#define DMA_FLAG_HT4 ((uint32_t)0x00004000)
-#define DMA_FLAG_TE4 ((uint32_t)0x00008000)
-#define DMA_FLAG_GL5 ((uint32_t)0x00010000)
-#define DMA_FLAG_TC5 ((uint32_t)0x00020000)
-#define DMA_FLAG_HT5 ((uint32_t)0x00040000)
-#define DMA_FLAG_TE5 ((uint32_t)0x00080000)
-#define DMA_FLAG_GL6 ((uint32_t)0x00100000)
-#define DMA_FLAG_TC6 ((uint32_t)0x00200000)
-#define DMA_FLAG_HT6 ((uint32_t)0x00400000)
-#define DMA_FLAG_TE6 ((uint32_t)0x00800000)
-#define DMA_FLAG_GL7 ((uint32_t)0x01000000)
-#define DMA_FLAG_TC7 ((uint32_t)0x02000000)
-#define DMA_FLAG_HT7 ((uint32_t)0x04000000)
-#define DMA_FLAG_TE7 ((uint32_t)0x08000000)
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup DMA_Exported_Macros DMA Exported Macros
- * @{
- */
-
-/** @brief Reset DMA handle state
- * @param __HANDLE__: DMA handle.
- * @retval None
- */
-#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
-
-/**
- * @brief Enable the specified DMA Channel.
- * @param __HANDLE__: DMA handle
- * @retval None.
- */
-#define __HAL_DMA_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CCR, DMA_CCR_EN))
-
-/**
- * @brief Disable the specified DMA Channel.
- * @param __HANDLE__: DMA handle
- * @retval None.
- */
-#define __HAL_DMA_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CCR, DMA_CCR_EN))
-
-
-/* Interrupt & Flag management */
-
-/**
- * @brief Enables the specified DMA Channel interrupts.
- * @param __HANDLE__: DMA handle
- * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
- * This parameter can be any combination of the following values:
- * @arg DMA_IT_TC: Transfer complete interrupt mask
- * @arg DMA_IT_HT: Half transfer complete interrupt mask
- * @arg DMA_IT_TE: Transfer error interrupt mask
- * @retval None
- */
-#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (SET_BIT((__HANDLE__)->Instance->CCR, (__INTERRUPT__)))
-
-/**
- * @brief Disables the specified DMA Channel interrupts.
- * @param __HANDLE__: DMA handle
- * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
- * This parameter can be any combination of the following values:
- * @arg DMA_IT_TC: Transfer complete interrupt mask
- * @arg DMA_IT_HT: Half transfer complete interrupt mask
- * @arg DMA_IT_TE: Transfer error interrupt mask
- * @retval None
- */
-#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CCR , (__INTERRUPT__)))
-
-/**
- * @brief Checks whether the specified DMA Channel interrupt is enabled or disabled.
- * @param __HANDLE__: DMA handle
- * @param __INTERRUPT__: specifies the DMA interrupt source to check.
- * This parameter can be one of the following values:
- * @arg DMA_IT_TC: Transfer complete interrupt mask
- * @arg DMA_IT_HT: Half transfer complete interrupt mask
- * @arg DMA_IT_TE: Transfer error interrupt mask
- * @retval The state of DMA_IT (SET or RESET).
- */
-#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CCR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
-
-/**
- * @brief Returns the number of remaining data units in the current DMAy Channelx transfer.
- * @param __HANDLE__: DMA handle
- *
- * @retval The number of remaining data units in the current DMA Channel transfer.
- */
-#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR)
-
-/**
- * @}
- */
-
-/* Include DMA HAL Extension module */
-#include "stm32f1xx_hal_dma_ex.h"
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup DMA_Exported_Functions DMA Exported Functions
- * @{
- */
-
-/** @addtogroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions
- * @{
- */
-/* Initialization and de-initialization functions *****************************/
-HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
-HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma);
-/**
- * @}
- */
-
-/** @addtogroup DMA_Exported_Functions_Group2 Input and Output operation functions
- * @{
- */
-/* IO operation functions *****************************************************/
-HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
-HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
-HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
-HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout);
-void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
-/**
- * @}
- */
-
-/** @addtogroup DMA_Exported_Functions_Group3 Peripheral State functions
- * @{
- */
-/* Peripheral State and Error functions ***************************************/
-HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
-uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Private Constants -------------------------------------------------------------*/
-/** @defgroup DMA_Private_Constants DMA Private Constants
- * @brief DMA private defines and constants
- * @{
- */
-/**
- * @}
- */
-
-/* Private macros ------------------------------------------------------------*/
-/** @defgroup DMA_Private_Macros DMA Private Macros
- * @brief DMA private macros
- * @{
- */
-
-#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000))
-
-#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
- ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \
- ((DIRECTION) == DMA_MEMORY_TO_MEMORY))
-
-#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
- ((STATE) == DMA_PINC_DISABLE))
-
-#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \
- ((STATE) == DMA_MINC_DISABLE))
-
-#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \
- ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
- ((SIZE) == DMA_PDATAALIGN_WORD))
-
-#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \
- ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
- ((SIZE) == DMA_MDATAALIGN_WORD ))
-
-#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \
- ((MODE) == DMA_CIRCULAR))
-
-#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \
- ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
- ((PRIORITY) == DMA_PRIORITY_HIGH) || \
- ((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
-
-/**
- * @}
- */
-
-/* Private functions ---------------------------------------------------------*/
-/** @defgroup DMA_Private_Functions DMA Private Functions
- * @brief DMA private functions
- * @{
- */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F1xx_HAL_DMA_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h
deleted file mode 100644
index ca3af14..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h
+++ /dev/null
@@ -1,260 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_dma_ex.h
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief Header file of DMA HAL extension module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F1xx_HAL_DMA_EX_H
-#define __STM32F1xx_HAL_DMA_EX_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal_def.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @defgroup DMAEx DMAEx
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup DMAEx_Exported_Macros DMA Extended Exported Macros
- * @{
- */
-/* Interrupt & Flag management */
-#if defined (STM32F100xE) || defined (STM32F101xE) || defined (STM32F101xG) || defined (STM32F103xE) || \
- defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC)
-/** @defgroup DMAEx_High_density_XL_density_Product_devices DMAEx High density and XL density product devices
- * @{
- */
-
-/**
- * @brief Returns the current DMA Channel transfer complete flag.
- * @param __HANDLE__: DMA handle
- * @retval The specified transfer complete flag index.
- */
-#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
-(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TC7 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TC2 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TC3 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TC4 :\
- DMA_FLAG_TC5)
-
-/**
- * @brief Returns the current DMA Channel half transfer complete flag.
- * @param __HANDLE__: DMA handle
- * @retval The specified half transfer complete flag index.
- */
-#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
-(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_HT7 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_HT2 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_HT3 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_HT4 :\
- DMA_FLAG_HT5)
-
-/**
- * @brief Returns the current DMA Channel transfer error flag.
- * @param __HANDLE__: DMA handle
- * @retval The specified transfer error flag index.
- */
-#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
-(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TE7 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TE2 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TE3 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TE4 :\
- DMA_FLAG_TE5)
-
-/**
- * @brief Get the DMA Channel pending flags.
- * @param __HANDLE__: DMA handle
- * @param __FLAG__: Get the specified flag.
- * This parameter can be any combination of the following values:
- * @arg DMA_FLAG_TCx: Transfer complete flag
- * @arg DMA_FLAG_HTx: Half transfer complete flag
- * @arg DMA_FLAG_TEx: Transfer error flag
- * Where x can be 1_7 or 1_5 (depending on DMA1 or DMA2) to select the DMA Channel flag.
- * @retval The state of FLAG (SET or RESET).
- */
-#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\
-(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->ISR & (__FLAG__)) :\
- (DMA1->ISR & (__FLAG__)))
-
-/**
- * @brief Clears the DMA Channel pending flags.
- * @param __HANDLE__: DMA handle
- * @param __FLAG__: specifies the flag to clear.
- * This parameter can be any combination of the following values:
- * @arg DMA_FLAG_TCx: Transfer complete flag
- * @arg DMA_FLAG_HTx: Half transfer complete flag
- * @arg DMA_FLAG_TEx: Transfer error flag
- * Where x can be 1_7 or 1_5 (depending on DMA1 or DMA2) to select the DMA Channel flag.
- * @retval None
- */
-#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \
-(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->IFCR = (__FLAG__)) :\
- (DMA1->IFCR = (__FLAG__)))
-
-/**
- * @}
- */
-
-#else
-/** @defgroup DMA_Low_density_Medium_density_Product_devices DMA Low density and Medium density product devices
- * @{
- */
-
-/**
- * @brief Returns the current DMA Channel transfer complete flag.
- * @param __HANDLE__: DMA handle
- * @retval The specified transfer complete flag index.
- */
-#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
-(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
- DMA_FLAG_TC7)
-
-/**
- * @brief Returns the current DMA Channel half transfer complete flag.
- * @param __HANDLE__: DMA handle
- * @retval The specified half transfer complete flag index.
- */
-#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
-(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
- DMA_FLAG_HT7)
-
-/**
- * @brief Returns the current DMA Channel transfer error flag.
- * @param __HANDLE__: DMA handle
- * @retval The specified transfer error flag index.
- */
-#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
-(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
- ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
- DMA_FLAG_TE7)
-
-/**
- * @brief Get the DMA Channel pending flags.
- * @param __HANDLE__: DMA handle
- * @param __FLAG__: Get the specified flag.
- * This parameter can be any combination of the following values:
- * @arg DMA_FLAG_TCx: Transfer complete flag
- * @arg DMA_FLAG_HTx: Half transfer complete flag
- * @arg DMA_FLAG_TEx: Transfer error flag
- * Where x can be 1_7 to select the DMA Channel flag.
- * @retval The state of FLAG (SET or RESET).
- */
-
-#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__))
-
-/**
- * @brief Clears the DMA Channel pending flags.
- * @param __HANDLE__: DMA handle
- * @param __FLAG__: specifies the flag to clear.
- * This parameter can be any combination of the following values:
- * @arg DMA_FLAG_TCx: Transfer complete flag
- * @arg DMA_FLAG_HTx: Half transfer complete flag
- * @arg DMA_FLAG_TEx: Transfer error flag
- * Where x can be 1_7 to select the DMA Channel flag.
- * @retval None
- */
-#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__))
-
-/**
- * @}
- */
-
-#endif
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || */
- /* STM32F103xG || STM32F105xC || STM32F107xC */
-
-#endif /* __STM32F1xx_HAL_DMA_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h
deleted file mode 100644
index 5f46d66..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h
+++ /dev/null
@@ -1,348 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_flash.h
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief Header file of Flash HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F1xx_HAL_FLASH_H
-#define __STM32F1xx_HAL_FLASH_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal_def.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup FLASH
- * @{
- */
-
-/** @addtogroup FLASH_Private_Constants
- * @{
- */
-#define FLASH_TIMEOUT_VALUE ((uint32_t)50000)/* 50 s */
-/**
- * @}
- */
-
-/** @addtogroup FLASH_Private_Macros
- * @{
- */
-
-#define IS_FLASH_TYPEPROGRAM(VALUE) (((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
- ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \
- ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))
-
-#if defined(FLASH_ACR_LATENCY)
-#define IS_FLASH_LATENCY(__LATENCY__) (((__LATENCY__) == FLASH_LATENCY_0) || \
- ((__LATENCY__) == FLASH_LATENCY_1) || \
- ((__LATENCY__) == FLASH_LATENCY_2))
-
-#else
-#define IS_FLASH_LATENCY(__LATENCY__) ((__LATENCY__) == FLASH_LATENCY_0)
-#endif /* FLASH_ACR_LATENCY */
-/**
- * @}
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup FLASH_Exported_Types FLASH Exported Types
- * @{
- */
-
-
-/**
- * @brief FLASH Procedure structure definition
- */
-typedef enum
-{
- FLASH_PROC_NONE = 0,
- FLASH_PROC_PAGEERASE = 1,
- FLASH_PROC_MASSERASE = 2,
- FLASH_PROC_PROGRAMHALFWORD = 3,
- FLASH_PROC_PROGRAMWORD = 4,
- FLASH_PROC_PROGRAMDOUBLEWORD = 5
-} FLASH_ProcedureTypeDef;
-
-/**
- * @brief FLASH handle Structure definition
- */
-typedef struct
-{
- __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */
-
- __IO uint32_t DataRemaining; /*!< Internal variable to save the remaining pages to erase or half-word to program in IT context */
-
- __IO uint32_t Address; /*!< Internal variable to save address selected for program or erase */
-
- __IO uint64_t Data; /*!< Internal variable to save data to be programmed */
-
- HAL_LockTypeDef Lock; /*!< FLASH locking object */
-
- __IO uint32_t ErrorCode; /*!< FLASH error code
- This parameter can be a value of @ref FLASH_Error_Codes */
-} FLASH_ProcessTypeDef;
-
-/**
- * @}
- */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
- * @{
- */
-
-/** @defgroup FLASH_Error_Codes FLASH Error Codes
- * @{
- */
-
-#define HAL_FLASH_ERROR_NONE ((uint32_t)0x00) /*!< No error */
-#define HAL_FLASH_ERROR_PROG ((uint32_t)0x01) /*!< Programming error */
-#define HAL_FLASH_ERROR_WRP ((uint32_t)0x02) /*!< Write protection error */
-#define HAL_FLASH_ERROR_OPTV ((uint32_t)0x04) /*!< Option validity error */
-
-/**
- * @}
- */
-
-/** @defgroup FLASH_Type_Program FLASH Type Program
- * @{
- */
-#define FLASH_TYPEPROGRAM_HALFWORD ((uint32_t)0x01) /*!<Program a half-word (16-bit) at a specified address.*/
-#define FLASH_TYPEPROGRAM_WORD ((uint32_t)0x02) /*!<Program a word (32-bit) at a specified address.*/
-#define FLASH_TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x03) /*!<Program a double word (64-bit) at a specified address*/
-
-/**
- * @}
- */
-
-#if defined(FLASH_ACR_LATENCY)
-/** @defgroup FLASH_Latency FLASH Latency
- * @{
- */
-#define FLASH_LATENCY_0 ((uint32_t)0x00000000) /*!< FLASH Zero Latency cycle */
-#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_0 /*!< FLASH One Latency cycle */
-#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_1 /*!< FLASH Two Latency cycles */
-
-/**
- * @}
- */
-
-#else
-/** @defgroup FLASH_Latency FLASH Latency
- * @{
- */
-#define FLASH_LATENCY_0 ((uint32_t)0x00000000) /*!< FLASH Zero Latency cycle */
-
-/**
- * @}
- */
-
-#endif /* FLASH_ACR_LATENCY */
-/**
- * @}
- */
-
-/* Exported macro ------------------------------------------------------------*/
-
-/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
- * @brief macros to control FLASH features
- * @{
- */
-
-/** @defgroup FLASH_Half_Cycle FLASH Half Cycle
- * @brief macros to handle FLASH half cycle
- * @{
- */
-
-/**
- * @brief Enable the FLASH half cycle access.
- * @note half cycle access can only be used with a low-frequency clock of less than
- 8 MHz that can be obtained with the use of HSI or HSE but not of PLL.
- * @retval None
- */
-#define __HAL_FLASH_HALF_CYCLE_ACCESS_ENABLE() (FLASH->ACR |= FLASH_ACR_HLFCYA)
-
-/**
- * @brief Disable the FLASH half cycle access.
- * @note half cycle access can only be used with a low-frequency clock of less than
- 8 MHz that can be obtained with the use of HSI or HSE but not of PLL.
- * @retval None
- */
-#define __HAL_FLASH_HALF_CYCLE_ACCESS_DISABLE() (FLASH->ACR &= (~FLASH_ACR_HLFCYA))
-
-/**
- * @}
- */
-
-#if defined(FLASH_ACR_LATENCY)
-/** @defgroup FLASH_EM_Latency FLASH Latency
- * @brief macros to handle FLASH Latency
- * @{
- */
-
-/**
- * @brief Set the FLASH Latency.
- * @param __LATENCY__ FLASH Latency
- * The value of this parameter depend on device used within the same series
- * @retval None
- */
-#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (FLASH->ACR = (FLASH->ACR&(~FLASH_ACR_LATENCY)) | (__LATENCY__))
-
-
-/**
- * @brief Get the FLASH Latency.
- * @retval FLASH Latency
- * The value of this parameter depend on device used within the same series
- */
-#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
-
-/**
- * @}
- */
-
-#endif /* FLASH_ACR_LATENCY */
-/** @defgroup FLASH_Prefetch FLASH Prefetch
- * @brief macros to handle FLASH Prefetch buffer
- * @{
- */
-/**
- * @brief Enable the FLASH prefetch buffer.
- * @retval None
- */
-#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTBE)
-
-/**
- * @brief Disable the FLASH prefetch buffer.
- * @retval None
- */
-#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTBE))
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Include FLASH HAL Extended module */
-#include "stm32f1xx_hal_flash_ex.h"
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup FLASH_Exported_Functions
- * @{
- */
-
-/** @addtogroup FLASH_Exported_Functions_Group1
- * @{
- */
-/* IO operation functions *****************************************************/
-HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
-HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
-
-/* FLASH IRQ handler function */
-void HAL_FLASH_IRQHandler(void);
-/* Callbacks in non blocking modes */
-void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
-void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
-
-/**
- * @}
- */
-
-/** @addtogroup FLASH_Exported_Functions_Group2
- * @{
- */
-/* Peripheral Control functions ***********************************************/
-HAL_StatusTypeDef HAL_FLASH_Unlock(void);
-HAL_StatusTypeDef HAL_FLASH_Lock(void);
-HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
-HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
-HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
-
-/**
- * @}
- */
-
-/** @addtogroup FLASH_Exported_Functions_Group3
- * @{
- */
-/* Peripheral State and Error functions ***************************************/
-uint32_t HAL_FLASH_GetError(void);
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Private function -------------------------------------------------*/
-/** @addtogroup FLASH_Private_Functions
- * @{
- */
-void FLASH_PageErase(uint32_t PageAddress);
-HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
-#if defined(FLASH_BANK2_END)
-HAL_StatusTypeDef FLASH_WaitForLastOperationBank2(uint32_t Timeout);
-#endif /* FLASH_BANK2_END */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F1xx_HAL_FLASH_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h
deleted file mode 100644
index 41375db..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h
+++ /dev/null
@@ -1,804 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_flash_ex.h
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief Header file of Flash HAL Extended module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F1xx_HAL_FLASH_EX_H
-#define __STM32F1xx_HAL_FLASH_EX_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal_def.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup FLASHEx
- * @{
- */
-
-/** @addtogroup FLASHEx_Private_Constants
- * @{
- */
-
-#define FLASH_SIZE_DATA_REGISTER ((uint32_t)0x1FFFF7E0)
-#define OBR_REG_INDEX ((uint32_t)1)
-#define SR_FLAG_MASK ((uint32_t)(FLASH_SR_BSY | FLASH_SR_PGERR | FLASH_SR_WRPRTERR | FLASH_SR_EOP))
-
-/**
- * @}
- */
-
-/** @addtogroup FLASHEx_Private_Macros
- * @{
- */
-
-#define IS_FLASH_TYPEERASE(VALUE) (((VALUE) == FLASH_TYPEERASE_PAGES) || ((VALUE) == FLASH_TYPEERASE_MASSERASE))
-
-#define IS_OPTIONBYTE(VALUE) (((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA)))
-
-#define IS_WRPSTATE(VALUE) (((VALUE) == OB_WRPSTATE_DISABLE) || ((VALUE) == OB_WRPSTATE_ENABLE))
-
-#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) || ((LEVEL) == OB_RDP_LEVEL_1))
-
-#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == OB_DATA_ADDRESS_DATA0) || ((ADDRESS) == OB_DATA_ADDRESS_DATA1))
-
-#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
-
-#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
-
-#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
-
-#if defined(FLASH_BANK2_END)
-#define IS_OB_BOOT1(BOOT1) (((BOOT1) == OB_BOOT1_RESET) || ((BOOT1) == OB_BOOT1_SET))
-#endif /* FLASH_BANK2_END */
-
-/* Low Density */
-#if (defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6))
-#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08007FFF) : \
- ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08003FFF))
-#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */
-
-/* Medium Density */
-#if (defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB))
-#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0801FFFF) : \
- (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x40) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0800FFFF) : \
- (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08007FFF) : \
- ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08003FFF))))
-#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB*/
-
-/* High Density */
-#if (defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE))
-#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x200) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0807FFFF) : \
- (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x180) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0805FFFF) : \
- ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0803FFFF)))
-#endif /* STM32F100xE || STM32F101xE || STM32F103xE */
-
-/* XL Density */
-#if defined(FLASH_BANK2_END)
-#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x400) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x080FFFFF) : \
- ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x080BFFFF))
-#endif /* FLASH_BANK2_END */
-
-/* Connectivity Line */
-#if (defined(STM32F105xC) || defined(STM32F107xC))
-#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x100) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0803FFFF) : \
- (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0801FFFF) : \
- ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0800FFFF)))
-#endif /* STM32F105xC || STM32F107xC */
-
-#define IS_OB_WRP(PAGE) (((PAGE) != 0x0000000))
-
-#if defined(FLASH_BANK2_END)
-#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1) || \
- ((BANK) == FLASH_BANK_2) || \
- ((BANK) == FLASH_BANK_BOTH))
-#else
-#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1))
-#endif /* FLASH_BANK2_END */
-
-/* Low Density */
-#if (defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6))
-#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20) ? \
- ((ADDRESS) <= FLASH_BANK1_END) : ((ADDRESS) <= 0x08003FFF)))
-
-#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */
-
-/* Medium Density */
-#if (defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB))
-#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80) ? \
- ((ADDRESS) <= FLASH_BANK1_END) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x40) ? \
- ((ADDRESS) <= 0x0800FFFF) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20) ? \
- ((ADDRESS) <= 0x08007FFF) : ((ADDRESS) <= 0x08003FFF)))))
-
-#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB*/
-
-/* High Density */
-#if (defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE))
-#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x200) ? \
- ((ADDRESS) <= FLASH_BANK1_END) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x180) ? \
- ((ADDRESS) <= 0x0805FFFF) : ((ADDRESS) <= 0x0803FFFF))))
-
-#endif /* STM32F100xE || STM32F101xE || STM32F103xE */
-
-/* XL Density */
-#if defined(FLASH_BANK2_END)
-#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x400) ? \
- ((ADDRESS) <= FLASH_BANK2_END) : ((ADDRESS) <= 0x080BFFFF)))
-
-#endif /* FLASH_BANK2_END */
-
-/* Connectivity Line */
-#if (defined(STM32F105xC) || defined(STM32F107xC))
-#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x100) ? \
- ((ADDRESS) <= FLASH_BANK1_END) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80) ? \
- ((ADDRESS) <= 0x0801FFFF) : ((ADDRESS) <= 0x0800FFFF))))
-
-#endif /* STM32F105xC || STM32F107xC */
-
-/**
- * @}
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup FLASHEx_Exported_Types FLASHEx Exported Types
- * @{
- */
-
-/**
- * @brief FLASH Erase structure definition
- */
-typedef struct
-{
- uint32_t TypeErase; /*!< TypeErase: Mass erase or page erase.
- This parameter can be a value of @ref FLASHEx_Type_Erase */
-
- uint32_t Banks; /*!< Select banks to erase when Mass erase is enabled.
- This parameter must be a value of @ref FLASHEx_Banks */
-
- uint32_t PageAddress; /*!< PageAdress: Initial FLASH page address to erase when mass erase is disabled
- This parameter must be a number between Min_Data = 0x08000000 and Max_Data = FLASH_BANKx_END
- (x = 1 or 2 depending on devices)*/
-
- uint32_t NbPages; /*!< NbPages: Number of pagess to be erased.
- This parameter must be a value between Min_Data = 1 and Max_Data = (max number of pages - value of initial page)*/
-
-} FLASH_EraseInitTypeDef;
-
-/**
- * @brief FLASH Options bytes program structure definition
- */
-typedef struct
-{
- uint32_t OptionType; /*!< OptionType: Option byte to be configured.
- This parameter can be a value of @ref FLASHEx_OB_Type */
-
- uint32_t WRPState; /*!< WRPState: Write protection activation or deactivation.
- This parameter can be a value of @ref FLASHEx_OB_WRP_State */
-
- uint32_t WRPPage; /*!< WRPPage: specifies the page(s) to be write protected
- This parameter can be a value of @ref FLASHEx_OB_Write_Protection */
-
- uint32_t Banks; /*!< Select banks for WRP activation/deactivation of all sectors.
- This parameter must be a value of @ref FLASHEx_Banks */
-
- uint8_t RDPLevel; /*!< RDPLevel: Set the read protection level..
- This parameter can be a value of @ref FLASHEx_OB_Read_Protection */
-
-#if defined(FLASH_BANK2_END)
- uint8_t USERConfig; /*!< USERConfig: Program the FLASH User Option Byte:
- IWDG / STOP / STDBY / BOOT1
- This parameter can be a combination of @ref FLASHEx_OB_IWatchdog, @ref FLASHEx_OB_nRST_STOP,
- @ref FLASHEx_OB_nRST_STDBY, @ref FLASHEx_OB_BOOT1 */
-#else
- uint8_t USERConfig; /*!< USERConfig: Program the FLASH User Option Byte:
- IWDG / STOP / STDBY
- This parameter can be a combination of @ref FLASHEx_OB_IWatchdog, @ref FLASHEx_OB_nRST_STOP,
- @ref FLASHEx_OB_nRST_STDBY */
-#endif /* FLASH_BANK2_END */
-
- uint32_t DATAAddress; /*!< DATAAddress: Address of the option byte DATA to be programmed
- This parameter can be a value of @ref FLASHEx_OB_Data_Address */
-
- uint8_t DATAData; /*!< DATAData: Data to be stored in the option byte DATA
- This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */
-} FLASH_OBProgramInitTypeDef;
-
-/**
- * @}
- */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup FLASHEx_Exported_Constants FLASHEx Exported Constants
- * @{
- */
-
-/** @defgroup FLASHEx_Constants FLASH Constants
- * @{
- */
-
-/** @defgroup FLASHEx_Page_Size Page Size
- * @{
- */
-#if (defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6) || defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB))
-#define FLASH_PAGE_SIZE ((uint32_t)0x400)
-#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */
- /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */
-
-#if (defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC))
-#define FLASH_PAGE_SIZE ((uint32_t)0x800)
-#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */
- /* STM32F101xG || STM32F103xG */
- /* STM32F105xC || STM32F107xC */
-
-/**
- * @}
- */
-
-/** @defgroup FLASHEx_Type_Erase Type Erase
- * @{
- */
-#define FLASH_TYPEERASE_PAGES ((uint32_t)0x00) /*!<Pages erase only*/
-#define FLASH_TYPEERASE_MASSERASE ((uint32_t)0x02) /*!<Flash mass erase activation*/
-
-/**
- * @}
- */
-
-/** @defgroup FLASHEx_Banks Banks
- * @{
- */
-#if defined(FLASH_BANK2_END)
-#define FLASH_BANK_1 ((uint32_t)1) /*!< Bank 1 */
-#define FLASH_BANK_2 ((uint32_t)2) /*!< Bank 2 */
-#define FLASH_BANK_BOTH ((uint32_t)FLASH_BANK_1 | FLASH_BANK_2) /*!< Bank1 and Bank2 */
-
-#else
-#define FLASH_BANK_1 ((uint32_t)1) /*!< Bank 1 */
-#endif
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/** @defgroup FLASHEx_OptionByte_Constants Option Byte Constants
- * @{
- */
-
-/** @defgroup FLASHEx_OB_Type Option Bytes Type
- * @{
- */
-#define OPTIONBYTE_WRP ((uint32_t)0x01) /*!<WRP option byte configuration*/
-#define OPTIONBYTE_RDP ((uint32_t)0x02) /*!<RDP option byte configuration*/
-#define OPTIONBYTE_USER ((uint32_t)0x04) /*!<USER option byte configuration*/
-#define OPTIONBYTE_DATA ((uint32_t)0x08) /*!<DATA option byte configuration*/
-
-/**
- * @}
- */
-
-/** @defgroup FLASHEx_OB_WRP_State Option Byte WRP State
- * @{
- */
-#define OB_WRPSTATE_DISABLE ((uint32_t)0x00) /*!<Disable the write protection of the desired pages*/
-#define OB_WRPSTATE_ENABLE ((uint32_t)0x01) /*!<Enable the write protection of the desired pagess*/
-
-/**
- * @}
- */
-
-/** @defgroup FLASHEx_OB_Write_Protection Option Bytes Write Protection
- * @{
- */
-/* STM32 Low and Medium density devices */
-#if defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6) \
- || defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) \
- || defined(STM32F103xB)
-#define OB_WRP_PAGES0TO3 ((uint32_t)0x00000001) /*!< Write protection of page 0 to 3 */
-#define OB_WRP_PAGES4TO7 ((uint32_t)0x00000002) /*!< Write protection of page 4 to 7 */
-#define OB_WRP_PAGES8TO11 ((uint32_t)0x00000004) /*!< Write protection of page 8 to 11 */
-#define OB_WRP_PAGES12TO15 ((uint32_t)0x00000008) /*!< Write protection of page 12 to 15 */
-#define OB_WRP_PAGES16TO19 ((uint32_t)0x00000010) /*!< Write protection of page 16 to 19 */
-#define OB_WRP_PAGES20TO23 ((uint32_t)0x00000020) /*!< Write protection of page 20 to 23 */
-#define OB_WRP_PAGES24TO27 ((uint32_t)0x00000040) /*!< Write protection of page 24 to 27 */
-#define OB_WRP_PAGES28TO31 ((uint32_t)0x00000080) /*!< Write protection of page 28 to 31 */
-#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */
- /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */
-
-/* STM32 Medium-density devices */
-#if defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB)
-#define OB_WRP_PAGES32TO35 ((uint32_t)0x00000100) /*!< Write protection of page 32 to 35 */
-#define OB_WRP_PAGES36TO39 ((uint32_t)0x00000200) /*!< Write protection of page 36 to 39 */
-#define OB_WRP_PAGES40TO43 ((uint32_t)0x00000400) /*!< Write protection of page 40 to 43 */
-#define OB_WRP_PAGES44TO47 ((uint32_t)0x00000800) /*!< Write protection of page 44 to 47 */
-#define OB_WRP_PAGES48TO51 ((uint32_t)0x00001000) /*!< Write protection of page 48 to 51 */
-#define OB_WRP_PAGES52TO55 ((uint32_t)0x00002000) /*!< Write protection of page 52 to 55 */
-#define OB_WRP_PAGES56TO59 ((uint32_t)0x00004000) /*!< Write protection of page 56 to 59 */
-#define OB_WRP_PAGES60TO63 ((uint32_t)0x00008000) /*!< Write protection of page 60 to 63 */
-#define OB_WRP_PAGES64TO67 ((uint32_t)0x00010000) /*!< Write protection of page 64 to 67 */
-#define OB_WRP_PAGES68TO71 ((uint32_t)0x00020000) /*!< Write protection of page 68 to 71 */
-#define OB_WRP_PAGES72TO75 ((uint32_t)0x00040000) /*!< Write protection of page 72 to 75 */
-#define OB_WRP_PAGES76TO79 ((uint32_t)0x00080000) /*!< Write protection of page 76 to 79 */
-#define OB_WRP_PAGES80TO83 ((uint32_t)0x00100000) /*!< Write protection of page 80 to 83 */
-#define OB_WRP_PAGES84TO87 ((uint32_t)0x00200000) /*!< Write protection of page 84 to 87 */
-#define OB_WRP_PAGES88TO91 ((uint32_t)0x00400000) /*!< Write protection of page 88 to 91 */
-#define OB_WRP_PAGES92TO95 ((uint32_t)0x00800000) /*!< Write protection of page 92 to 95 */
-#define OB_WRP_PAGES96TO99 ((uint32_t)0x01000000) /*!< Write protection of page 96 to 99 */
-#define OB_WRP_PAGES100TO103 ((uint32_t)0x02000000) /*!< Write protection of page 100 to 103 */
-#define OB_WRP_PAGES104TO107 ((uint32_t)0x04000000) /*!< Write protection of page 104 to 107 */
-#define OB_WRP_PAGES108TO111 ((uint32_t)0x08000000) /*!< Write protection of page 108 to 111 */
-#define OB_WRP_PAGES112TO115 ((uint32_t)0x10000000) /*!< Write protection of page 112 to 115 */
-#define OB_WRP_PAGES116TO119 ((uint32_t)0x20000000) /*!< Write protection of page 115 to 119 */
-#define OB_WRP_PAGES120TO123 ((uint32_t)0x40000000) /*!< Write protection of page 120 to 123 */
-#define OB_WRP_PAGES124TO127 ((uint32_t)0x80000000) /*!< Write protection of page 124 to 127 */
-#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */
-
-
-/* STM32 High-density, XL-density and Connectivity line devices */
-#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE) \
- || defined(STM32F101xG) || defined(STM32F103xG) \
- || defined(STM32F105xC) || defined(STM32F107xC)
-#define OB_WRP_PAGES0TO1 ((uint32_t)0x00000001) /*!< Write protection of page 0 TO 1 */
-#define OB_WRP_PAGES2TO3 ((uint32_t)0x00000002) /*!< Write protection of page 2 TO 3 */
-#define OB_WRP_PAGES4TO5 ((uint32_t)0x00000004) /*!< Write protection of page 4 TO 5 */
-#define OB_WRP_PAGES6TO7 ((uint32_t)0x00000008) /*!< Write protection of page 6 TO 7 */
-#define OB_WRP_PAGES8TO9 ((uint32_t)0x00000010) /*!< Write protection of page 8 TO 9 */
-#define OB_WRP_PAGES10TO11 ((uint32_t)0x00000020) /*!< Write protection of page 10 TO 11 */
-#define OB_WRP_PAGES12TO13 ((uint32_t)0x00000040) /*!< Write protection of page 12 TO 13 */
-#define OB_WRP_PAGES14TO15 ((uint32_t)0x00000080) /*!< Write protection of page 14 TO 15 */
-#define OB_WRP_PAGES16TO17 ((uint32_t)0x00000100) /*!< Write protection of page 16 TO 17 */
-#define OB_WRP_PAGES18TO19 ((uint32_t)0x00000200) /*!< Write protection of page 18 TO 19 */
-#define OB_WRP_PAGES20TO21 ((uint32_t)0x00000400) /*!< Write protection of page 20 TO 21 */
-#define OB_WRP_PAGES22TO23 ((uint32_t)0x00000800) /*!< Write protection of page 22 TO 23 */
-#define OB_WRP_PAGES24TO25 ((uint32_t)0x00001000) /*!< Write protection of page 24 TO 25 */
-#define OB_WRP_PAGES26TO27 ((uint32_t)0x00002000) /*!< Write protection of page 26 TO 27 */
-#define OB_WRP_PAGES28TO29 ((uint32_t)0x00004000) /*!< Write protection of page 28 TO 29 */
-#define OB_WRP_PAGES30TO31 ((uint32_t)0x00008000) /*!< Write protection of page 30 TO 31 */
-#define OB_WRP_PAGES32TO33 ((uint32_t)0x00010000) /*!< Write protection of page 32 TO 33 */
-#define OB_WRP_PAGES34TO35 ((uint32_t)0x00020000) /*!< Write protection of page 34 TO 35 */
-#define OB_WRP_PAGES36TO37 ((uint32_t)0x00040000) /*!< Write protection of page 36 TO 37 */
-#define OB_WRP_PAGES38TO39 ((uint32_t)0x00080000) /*!< Write protection of page 38 TO 39 */
-#define OB_WRP_PAGES40TO41 ((uint32_t)0x00100000) /*!< Write protection of page 40 TO 41 */
-#define OB_WRP_PAGES42TO43 ((uint32_t)0x00200000) /*!< Write protection of page 42 TO 43 */
-#define OB_WRP_PAGES44TO45 ((uint32_t)0x00400000) /*!< Write protection of page 44 TO 45 */
-#define OB_WRP_PAGES46TO47 ((uint32_t)0x00800000) /*!< Write protection of page 46 TO 47 */
-#define OB_WRP_PAGES48TO49 ((uint32_t)0x01000000) /*!< Write protection of page 48 TO 49 */
-#define OB_WRP_PAGES50TO51 ((uint32_t)0x02000000) /*!< Write protection of page 50 TO 51 */
-#define OB_WRP_PAGES52TO53 ((uint32_t)0x04000000) /*!< Write protection of page 52 TO 53 */
-#define OB_WRP_PAGES54TO55 ((uint32_t)0x08000000) /*!< Write protection of page 54 TO 55 */
-#define OB_WRP_PAGES56TO57 ((uint32_t)0x10000000) /*!< Write protection of page 56 TO 57 */
-#define OB_WRP_PAGES58TO59 ((uint32_t)0x20000000) /*!< Write protection of page 58 TO 59 */
-#define OB_WRP_PAGES60TO61 ((uint32_t)0x40000000) /*!< Write protection of page 60 TO 61 */
-#define OB_WRP_PAGES62TO127 ((uint32_t)0x80000000) /*!< Write protection of page 62 TO 127 */
-#define OB_WRP_PAGES62TO255 ((uint32_t)0x80000000) /*!< Write protection of page 62 TO 255 */
-#define OB_WRP_PAGES62TO511 ((uint32_t)0x80000000) /*!< Write protection of page 62 TO 511 */
-#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */
- /* STM32F101xG || STM32F103xG */
- /* STM32F105xC || STM32F107xC */
-
-#define OB_WRP_ALLPAGES ((uint32_t)0xFFFFFFFF) /*!< Write protection of all Pages */
-
-/* Low Density */
-#if defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6)
-#define OB_WRP_PAGES0TO31MASK ((uint32_t)0x000000FF)
-#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */
-
-/* Medium Density */
-#if defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB)
-#define OB_WRP_PAGES0TO31MASK ((uint32_t)0x000000FF)
-#define OB_WRP_PAGES32TO63MASK ((uint32_t)0x0000FF00)
-#define OB_WRP_PAGES64TO95MASK ((uint32_t)0x00FF0000)
-#define OB_WRP_PAGES96TO127MASK ((uint32_t)0xFF000000)
-#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB*/
-
-/* High Density */
-#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE)
-#define OB_WRP_PAGES0TO15MASK ((uint32_t)0x000000FF)
-#define OB_WRP_PAGES16TO31MASK ((uint32_t)0x0000FF00)
-#define OB_WRP_PAGES32TO47MASK ((uint32_t)0x00FF0000)
-#define OB_WRP_PAGES48TO255MASK ((uint32_t)0xFF000000)
-#endif /* STM32F100xE || STM32F101xE || STM32F103xE */
-
-/* XL Density */
-#if defined(STM32F101xG) || defined(STM32F103xG)
-#define OB_WRP_PAGES0TO15MASK ((uint32_t)0x000000FF)
-#define OB_WRP_PAGES16TO31MASK ((uint32_t)0x0000FF00)
-#define OB_WRP_PAGES32TO47MASK ((uint32_t)0x00FF0000)
-#define OB_WRP_PAGES48TO511MASK ((uint32_t)0xFF000000)
-#endif /* STM32F101xG || STM32F103xG */
-
-/* Connectivity line devices */
-#if defined(STM32F105xC) || defined(STM32F107xC)
-#define OB_WRP_PAGES0TO15MASK ((uint32_t)0x000000FF)
-#define OB_WRP_PAGES16TO31MASK ((uint32_t)0x0000FF00)
-#define OB_WRP_PAGES32TO47MASK ((uint32_t)0x00FF0000)
-#define OB_WRP_PAGES48TO127MASK ((uint32_t)0xFF000000)
-#endif /* STM32F105xC || STM32F107xC */
-
-/**
- * @}
- */
-
-/** @defgroup FLASHEx_OB_Read_Protection Option Byte Read Protection
- * @{
- */
-#define OB_RDP_LEVEL_0 ((uint8_t)0xA5)
-#define OB_RDP_LEVEL_1 ((uint8_t)0x00)
-/**
- * @}
- */
-
-/** @defgroup FLASHEx_OB_IWatchdog Option Byte IWatchdog
- * @{
- */
-#define OB_IWDG_SW ((uint16_t)0x0001) /*!< Software IWDG selected */
-#define OB_IWDG_HW ((uint16_t)0x0000) /*!< Hardware IWDG selected */
-/**
- * @}
- */
-
-/** @defgroup FLASHEx_OB_nRST_STOP Option Byte nRST STOP
- * @{
- */
-#define OB_STOP_NO_RST ((uint16_t)0x0002) /*!< No reset generated when entering in STOP */
-#define OB_STOP_RST ((uint16_t)0x0000) /*!< Reset generated when entering in STOP */
-/**
- * @}
- */
-
-/** @defgroup FLASHEx_OB_nRST_STDBY Option Byte nRST STDBY
- * @{
- */
-#define OB_STDBY_NO_RST ((uint16_t)0x0004) /*!< No reset generated when entering in STANDBY */
-#define OB_STDBY_RST ((uint16_t)0x0000) /*!< Reset generated when entering in STANDBY */
-/**
- * @}
- */
-
-#if defined(FLASH_BANK2_END)
-/** @defgroup FLASHEx_OB_BOOT1 Option Byte BOOT1
- * @{
- */
-#define OB_BOOT1_RESET ((uint16_t)0x0000) /*!< BOOT1 Reset */
-#define OB_BOOT1_SET ((uint16_t)0x0008) /*!< BOOT1 Set */
-/**
- * @}
- */
-#endif /* FLASH_BANK2_END */
-
-/** @defgroup FLASHEx_OB_Data_Address Option Byte Data Address
- * @{
- */
-#define OB_DATA_ADDRESS_DATA0 ((uint32_t)0x1FFFF804)
-#define OB_DATA_ADDRESS_DATA1 ((uint32_t)0x1FFFF806)
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/** @addtogroup FLASHEx_Constants
- * @{
- */
-
-/** @defgroup FLASH_Flag_definition Flag definition
- * @brief Flag definition
- * @{
- */
-#if defined(FLASH_BANK2_END)
- #define FLASH_FLAG_BSY FLASH_FLAG_BSY_BANK1 /*!< FLASH Bank1 Busy flag */
- #define FLASH_FLAG_PGERR FLASH_FLAG_PGERR_BANK1 /*!< FLASH Bank1 Programming error flag */
- #define FLASH_FLAG_WRPERR FLASH_FLAG_WRPERR_BANK1 /*!< FLASH Bank1 Write protected error flag */
- #define FLASH_FLAG_EOP FLASH_FLAG_EOP_BANK1 /*!< FLASH Bank1 End of Operation flag */
-
- #define FLASH_FLAG_BSY_BANK1 FLASH_SR_BSY /*!< FLASH Bank1 Busy flag */
- #define FLASH_FLAG_PGERR_BANK1 FLASH_SR_PGERR /*!< FLASH Bank1 Programming error flag */
- #define FLASH_FLAG_WRPERR_BANK1 FLASH_SR_WRPRTERR /*!< FLASH Bank1 Write protected error flag */
- #define FLASH_FLAG_EOP_BANK1 FLASH_SR_EOP /*!< FLASH Bank1 End of Operation flag */
-
- #define FLASH_FLAG_BSY_BANK2 (FLASH_SR2_BSY << 16) /*!< FLASH Bank2 Busy flag */
- #define FLASH_FLAG_PGERR_BANK2 (FLASH_SR2_PGERR << 16) /*!< FLASH Bank2 Programming error flag */
- #define FLASH_FLAG_WRPERR_BANK2 (FLASH_SR2_WRPRTERR << 16) /*!< FLASH Bank2 Write protected error flag */
- #define FLASH_FLAG_EOP_BANK2 (FLASH_SR2_EOP << 16) /*!< FLASH Bank2 End of Operation flag */
-
-#else
-
- #define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
- #define FLASH_FLAG_PGERR FLASH_SR_PGERR /*!< FLASH Programming error flag */
- #define FLASH_FLAG_WRPERR FLASH_SR_WRPRTERR /*!< FLASH Write protected error flag */
- #define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */
-
-#endif
- #define FLASH_FLAG_OPTVERR ((OBR_REG_INDEX << 8 | FLASH_OBR_OPTERR)) /*!< Option Byte Error */
-/**
- * @}
- */
-
-/** @defgroup FLASH_Interrupt_definition Interrupt definition
- * @brief FLASH Interrupt definition
- * @{
- */
-#if defined(FLASH_BANK2_END)
- #define FLASH_IT_EOP FLASH_IT_EOP_BANK1 /*!< End of FLASH Operation Interrupt source Bank1 */
- #define FLASH_IT_ERR FLASH_IT_ERR_BANK1 /*!< Error Interrupt source Bank1 */
-
- #define FLASH_IT_EOP_BANK1 FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source Bank1 */
- #define FLASH_IT_ERR_BANK1 FLASH_CR_ERRIE /*!< Error Interrupt source Bank1 */
-
- #define FLASH_IT_EOP_BANK2 (FLASH_CR2_EOPIE << 16) /*!< End of FLASH Operation Interrupt source Bank2 */
- #define FLASH_IT_ERR_BANK2 (FLASH_CR2_ERRIE << 16) /*!< Error Interrupt source Bank2 */
-
-#else
-
- #define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
- #define FLASH_IT_ERR FLASH_CR_ERRIE /*!< Error Interrupt source */
-
-#endif
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup FLASHEx_Exported_Macros FLASHEx Exported Macros
- * @{
- */
-
-/** @defgroup FLASH_Interrupt Interrupt
- * @brief macros to handle FLASH interrupts
- * @{
- */
-
-#if defined(FLASH_BANK2_END)
-/**
- * @brief Enable the specified FLASH interrupt.
- * @param __INTERRUPT__ FLASH interrupt
- * This parameter can be any combination of the following values:
- * @arg @ref FLASH_IT_EOP_BANK1 End of FLASH Operation Interrupt on bank1
- * @arg @ref FLASH_IT_ERR_BANK1 Error Interrupt on bank1
- * @arg @ref FLASH_IT_EOP_BANK2 End of FLASH Operation Interrupt on bank2
- * @arg @ref FLASH_IT_ERR_BANK2 Error Interrupt on bank2
- * @retval none
- */
-#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) do { \
- /* Enable Bank1 IT */ \
- SET_BIT(FLASH->CR, ((__INTERRUPT__) & 0x0000FFFF)); \
- /* Enable Bank2 IT */ \
- SET_BIT(FLASH->CR2, ((__INTERRUPT__) >> 16)); \
- } while(0)
-
-/**
- * @brief Disable the specified FLASH interrupt.
- * @param __INTERRUPT__ FLASH interrupt
- * This parameter can be any combination of the following values:
- * @arg @ref FLASH_IT_EOP_BANK1 End of FLASH Operation Interrupt on bank1
- * @arg @ref FLASH_IT_ERR_BANK1 Error Interrupt on bank1
- * @arg @ref FLASH_IT_EOP_BANK2 End of FLASH Operation Interrupt on bank2
- * @arg @ref FLASH_IT_ERR_BANK2 Error Interrupt on bank2
- * @retval none
- */
-#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) do { \
- /* Disable Bank1 IT */ \
- CLEAR_BIT(FLASH->CR, ((__INTERRUPT__) & 0x0000FFFF)); \
- /* Disable Bank2 IT */ \
- CLEAR_BIT(FLASH->CR2, ((__INTERRUPT__) >> 16)); \
- } while(0)
-
-/**
- * @brief Get the specified FLASH flag status.
- * @param __FLAG__ specifies the FLASH flag to check.
- * This parameter can be one of the following values:
- * @arg @ref FLASH_FLAG_EOP_BANK1 FLASH End of Operation flag on bank1
- * @arg @ref FLASH_FLAG_WRPERR_BANK1 FLASH Write protected error flag on bank1
- * @arg @ref FLASH_FLAG_PGERR_BANK1 FLASH Programming error flag on bank1
- * @arg @ref FLASH_FLAG_BSY_BANK1 FLASH Busy flag on bank1
- * @arg @ref FLASH_FLAG_EOP_BANK2 FLASH End of Operation flag on bank2
- * @arg @ref FLASH_FLAG_WRPERR_BANK2 FLASH Write protected error flag on bank2
- * @arg @ref FLASH_FLAG_PGERR_BANK2 FLASH Programming error flag on bank2
- * @arg @ref FLASH_FLAG_BSY_BANK2 FLASH Busy flag on bank2
- * @arg @ref FLASH_FLAG_OPTVERR Loaded OB and its complement do not match
- * @retval The new state of __FLAG__ (SET or RESET).
- */
-#define __HAL_FLASH_GET_FLAG(__FLAG__) (((__FLAG__) == FLASH_FLAG_OPTVERR) ? \
- (FLASH->OBR & FLASH_OBR_OPTERR) : \
- ((((__FLAG__) & SR_FLAG_MASK) != RESET)? \
- (FLASH->SR & ((__FLAG__) & SR_FLAG_MASK)) : \
- (FLASH->SR2 & ((__FLAG__) >> 16))))
-
-/**
- * @brief Clear the specified FLASH flag.
- * @param __FLAG__ specifies the FLASH flags to clear.
- * This parameter can be any combination of the following values:
- * @arg @ref FLASH_FLAG_EOP_BANK1 FLASH End of Operation flag on bank1
- * @arg @ref FLASH_FLAG_WRPERR_BANK1 FLASH Write protected error flag on bank1
- * @arg @ref FLASH_FLAG_PGERR_BANK1 FLASH Programming error flag on bank1
- * @arg @ref FLASH_FLAG_BSY_BANK1 FLASH Busy flag on bank1
- * @arg @ref FLASH_FLAG_EOP_BANK2 FLASH End of Operation flag on bank2
- * @arg @ref FLASH_FLAG_WRPERR_BANK2 FLASH Write protected error flag on bank2
- * @arg @ref FLASH_FLAG_PGERR_BANK2 FLASH Programming error flag on bank2
- * @arg @ref FLASH_FLAG_BSY_BANK2 FLASH Busy flag on bank2
- * @arg @ref FLASH_FLAG_OPTVERR Loaded OB and its complement do not match
- * @retval none
- */
-#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { \
- /* Clear FLASH_FLAG_OPTVERR flag */ \
- if ((__FLAG__) == FLASH_FLAG_OPTVERR) \
- { \
- CLEAR_BIT(FLASH->OBR, FLASH_OBR_OPTERR); \
- } \
- else { \
- /* Clear Flag in Bank1 */ \
- if (((__FLAG__) & SR_FLAG_MASK) != RESET) \
- { \
- FLASH->SR = ((__FLAG__) & SR_FLAG_MASK); \
- } \
- /* Clear Flag in Bank2 */ \
- if (((__FLAG__) >> 16) != RESET) \
- { \
- FLASH->SR2 = ((__FLAG__) >> 16); \
- } \
- } \
- } while(0)
-#else
-/**
- * @brief Enable the specified FLASH interrupt.
- * @param __INTERRUPT__ FLASH interrupt
- * This parameter can be any combination of the following values:
- * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt
- * @arg @ref FLASH_IT_ERR Error Interrupt
- * @retval none
- */
-#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__))
-
-/**
- * @brief Disable the specified FLASH interrupt.
- * @param __INTERRUPT__ FLASH interrupt
- * This parameter can be any combination of the following values:
- * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt
- * @arg @ref FLASH_IT_ERR Error Interrupt
- * @retval none
- */
-#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(__INTERRUPT__))
-
-/**
- * @brief Get the specified FLASH flag status.
- * @param __FLAG__ specifies the FLASH flag to check.
- * This parameter can be one of the following values:
- * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag
- * @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag
- * @arg @ref FLASH_FLAG_PGERR FLASH Programming error flag
- * @arg @ref FLASH_FLAG_BSY FLASH Busy flag
- * @arg @ref FLASH_FLAG_OPTVERR Loaded OB and its complement do not match
- * @retval The new state of __FLAG__ (SET or RESET).
- */
-#define __HAL_FLASH_GET_FLAG(__FLAG__) (((__FLAG__) == FLASH_FLAG_OPTVERR) ? \
- (FLASH->OBR & FLASH_OBR_OPTERR) : \
- (FLASH->SR & (__FLAG__)))
-/**
- * @brief Clear the specified FLASH flag.
- * @param __FLAG__ specifies the FLASH flags to clear.
- * This parameter can be any combination of the following values:
- * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag
- * @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag
- * @arg @ref FLASH_FLAG_PGERR FLASH Programming error flag
- * @arg @ref FLASH_FLAG_OPTVERR Loaded OB and its complement do not match
- * @retval none
- */
-#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { \
- /* Clear FLASH_FLAG_OPTVERR flag */ \
- if ((__FLAG__) == FLASH_FLAG_OPTVERR) \
- { \
- CLEAR_BIT(FLASH->OBR, FLASH_OBR_OPTERR); \
- } \
- else { \
- /* Clear Flag in Bank1 */ \
- FLASH->SR = (__FLAG__); \
- } \
- } while(0)
-
-#endif
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup FLASHEx_Exported_Functions
- * @{
- */
-
-/** @addtogroup FLASHEx_Exported_Functions_Group1
- * @{
- */
-/* IO operation functions *****************************************************/
-HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError);
-HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit);
-
-/**
- * @}
- */
-
-/** @addtogroup FLASHEx_Exported_Functions_Group2
- * @{
- */
-/* Peripheral Control functions ***********************************************/
-HAL_StatusTypeDef HAL_FLASHEx_OBErase(void);
-HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
-void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
-uint32_t HAL_FLASHEx_OBGetUserData(uint32_t DATAAdress);
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F1xx_HAL_FLASH_EX_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
deleted file mode 100644
index e585410..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
+++ /dev/null
@@ -1,324 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_gpio.h
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief Header file of GPIO HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F1xx_HAL_GPIO_H
-#define __STM32F1xx_HAL_GPIO_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal_def.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup GPIO
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup GPIO_Exported_Types GPIO Exported Types
- * @{
- */
-
-/**
- * @brief GPIO Init structure definition
- */
-typedef struct
-{
- uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
- This parameter can be any value of @ref GPIO_pins_define */
-
- uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
- This parameter can be a value of @ref GPIO_mode_define */
-
- uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
- This parameter can be a value of @ref GPIO_pull_define */
-
- uint32_t Speed; /*!< Specifies the speed for the selected pins.
- This parameter can be a value of @ref GPIO_speed_define */
-}GPIO_InitTypeDef;
-
-/**
- * @brief GPIO Bit SET and Bit RESET enumeration
- */
-typedef enum
-{
- GPIO_PIN_RESET = 0,
- GPIO_PIN_SET
-}GPIO_PinState;
-
-/**
- * @}
- */
-
-
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
- * @{
- */
-
-/** @defgroup GPIO_pins_define GPIO pins define
- * @{
- */
-#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */
-#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */
-#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */
-#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */
-#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */
-#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */
-#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */
-#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */
-#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */
-#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */
-#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */
-#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */
-#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */
-#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */
-#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */
-#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */
-#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */
-
-#define GPIO_PIN_MASK ((uint32_t)0x0000FFFF) /* PIN mask for assert test */
-/**
- * @}
- */
-
-
-/** @defgroup GPIO_mode_define GPIO mode define
- * @brief GPIO Configuration Mode
- * Elements values convention: 0xX0yz00YZ
- * - X : GPIO mode or EXTI Mode
- * - y : External IT or Event trigger detection
- * - z : IO configuration on External IT or Event
- * - Y : Output type (Push Pull or Open Drain)
- * - Z : IO Direction mode (Input, Output, Alternate or Analog)
- * @{
- */
-#define GPIO_MODE_INPUT ((uint32_t)0x00000000) /*!< Input Floating Mode */
-#define GPIO_MODE_OUTPUT_PP ((uint32_t)0x00000001) /*!< Output Push Pull Mode */
-#define GPIO_MODE_OUTPUT_OD ((uint32_t)0x00000011) /*!< Output Open Drain Mode */
-#define GPIO_MODE_AF_PP ((uint32_t)0x00000002) /*!< Alternate Function Push Pull Mode */
-#define GPIO_MODE_AF_OD ((uint32_t)0x00000012) /*!< Alternate Function Open Drain Mode */
-#define GPIO_MODE_AF_INPUT GPIO_MODE_INPUT /*!< Alternate Function Input Mode */
-
-#define GPIO_MODE_ANALOG ((uint32_t)0x00000003) /*!< Analog Mode */
-
-#define GPIO_MODE_IT_RISING ((uint32_t)0x10110000) /*!< External Interrupt Mode with Rising edge trigger detection */
-#define GPIO_MODE_IT_FALLING ((uint32_t)0x10210000) /*!< External Interrupt Mode with Falling edge trigger detection */
-#define GPIO_MODE_IT_RISING_FALLING ((uint32_t)0x10310000) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
-
-#define GPIO_MODE_EVT_RISING ((uint32_t)0x10120000) /*!< External Event Mode with Rising edge trigger detection */
-#define GPIO_MODE_EVT_FALLING ((uint32_t)0x10220000) /*!< External Event Mode with Falling edge trigger detection */
-#define GPIO_MODE_EVT_RISING_FALLING ((uint32_t)0x10320000) /*!< External Event Mode with Rising/Falling edge trigger detection */
-
-/**
- * @}
- */
-
-
-/** @defgroup GPIO_speed_define GPIO speed define
- * @brief GPIO Output Maximum frequency
- * @{
- */
-#define GPIO_SPEED_FREQ_LOW (GPIO_CRL_MODE0_1) /*!< Low speed */
-#define GPIO_SPEED_FREQ_MEDIUM (GPIO_CRL_MODE0_0) /*!< Medium speed */
-#define GPIO_SPEED_FREQ_HIGH (GPIO_CRL_MODE0) /*!< High speed */
-
-/**
- * @}
- */
-
-
- /** @defgroup GPIO_pull_define GPIO pull define
- * @brief GPIO Pull-Up or Pull-Down Activation
- * @{
- */
-#define GPIO_NOPULL ((uint32_t)0x00000000) /*!< No Pull-up or Pull-down activation */
-#define GPIO_PULLUP ((uint32_t)0x00000001) /*!< Pull-up activation */
-#define GPIO_PULLDOWN ((uint32_t)0x00000002) /*!< Pull-down activation */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-
-/* Private macros --------------------------------------------------------*/
-/** @addtogroup GPIO_Private_Macros
- * @{
- */
-
-#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
-
-#define IS_GPIO_PIN(PIN) (((PIN) & GPIO_PIN_MASK ) != (uint32_t)0x00)
-
-#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
- ((PULL) == GPIO_PULLDOWN))
-
-#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_FREQ_LOW) || \
- ((SPEED) == GPIO_SPEED_FREQ_MEDIUM) || ((SPEED) == GPIO_SPEED_FREQ_HIGH))
-
-#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\
- ((MODE) == GPIO_MODE_OUTPUT_PP) ||\
- ((MODE) == GPIO_MODE_OUTPUT_OD) ||\
- ((MODE) == GPIO_MODE_AF_PP) ||\
- ((MODE) == GPIO_MODE_AF_OD) ||\
- ((MODE) == GPIO_MODE_IT_RISING) ||\
- ((MODE) == GPIO_MODE_IT_FALLING) ||\
- ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\
- ((MODE) == GPIO_MODE_EVT_RISING) ||\
- ((MODE) == GPIO_MODE_EVT_FALLING) ||\
- ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
- ((MODE) == GPIO_MODE_ANALOG))
-
-/**
- * @}
- */
-
-
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
- * @{
- */
-
-/**
- * @brief Checks whether the specified EXTI line flag is set or not.
- * @param __EXTI_LINE__: specifies the EXTI line flag to check.
- * This parameter can be GPIO_PIN_x where x can be(0..15)
- * @retval The new state of __EXTI_LINE__ (SET or RESET).
- */
-#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
-
-/**
- * @brief Clears the EXTI's line pending flags.
- * @param __EXTI_LINE__: specifies the EXTI lines flags to clear.
- * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
- * @retval None
- */
-#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
-
-/**
- * @brief Checks whether the specified EXTI line is asserted or not.
- * @param __EXTI_LINE__: specifies the EXTI line to check.
- * This parameter can be GPIO_PIN_x where x can be(0..15)
- * @retval The new state of __EXTI_LINE__ (SET or RESET).
- */
-#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
-
-/**
- * @brief Clears the EXTI's line pending bits.
- * @param __EXTI_LINE__: specifies the EXTI lines to clear.
- * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
- * @retval None
- */
-#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
-
-/**
- * @brief Generates a Software interrupt on selected EXTI line.
- * @param __EXTI_LINE__: specifies the EXTI line to check.
- * This parameter can be GPIO_PIN_x where x can be(0..15)
- * @retval None
- */
-#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
-
-/* Include GPIO HAL Extension module */
-#include "stm32f1xx_hal_gpio_ex.h"
-
-/**
- * @}
- */
-
-
-
-/* Exported functions --------------------------------------------------------*/
-/* Initialization and de-initialization functions *******************************/
-/** @addtogroup GPIO_Exported_Functions
- * @{
- */
-
-/** @addtogroup GPIO_Exported_Functions_Group1
- * @{
- */
-void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
-void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
-/**
- * @}
- */
-
-/* IO operation functions *******************************************************/
-/** @addtogroup GPIO_Exported_Functions_Group2
- * @{
- */
-GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
-void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
-void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
-HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
-void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
-void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F1xx_HAL_GPIO_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h
deleted file mode 100644
index 71d8735..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h
+++ /dev/null
@@ -1,887 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_gpio_ex.h
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief Header file of GPIO HAL Extension module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F1xx_HAL_GPIO_EX_H
-#define __STM32F1xx_HAL_GPIO_EX_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal_def.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @defgroup GPIOEx GPIOEx
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants
- * @{
- */
-
-/** @defgroup GPIOEx_EVENTOUT EVENTOUT Cortex Configuration
- * @brief This section propose definition to use the Cortex EVENTOUT signal.
- * @{
- */
-
-/** @defgroup GPIOEx_EVENTOUT_PIN EVENTOUT Pin
- * @{
- */
-
-#define AFIO_EVENTOUT_PIN_0 AFIO_EVCR_PIN_PX0 /*!< EVENTOUT on pin 0 */
-#define AFIO_EVENTOUT_PIN_1 AFIO_EVCR_PIN_PX1 /*!< EVENTOUT on pin 1 */
-#define AFIO_EVENTOUT_PIN_2 AFIO_EVCR_PIN_PX2 /*!< EVENTOUT on pin 2 */
-#define AFIO_EVENTOUT_PIN_3 AFIO_EVCR_PIN_PX3 /*!< EVENTOUT on pin 3 */
-#define AFIO_EVENTOUT_PIN_4 AFIO_EVCR_PIN_PX4 /*!< EVENTOUT on pin 4 */
-#define AFIO_EVENTOUT_PIN_5 AFIO_EVCR_PIN_PX5 /*!< EVENTOUT on pin 5 */
-#define AFIO_EVENTOUT_PIN_6 AFIO_EVCR_PIN_PX6 /*!< EVENTOUT on pin 6 */
-#define AFIO_EVENTOUT_PIN_7 AFIO_EVCR_PIN_PX7 /*!< EVENTOUT on pin 7 */
-#define AFIO_EVENTOUT_PIN_8 AFIO_EVCR_PIN_PX8 /*!< EVENTOUT on pin 8 */
-#define AFIO_EVENTOUT_PIN_9 AFIO_EVCR_PIN_PX9 /*!< EVENTOUT on pin 9 */
-#define AFIO_EVENTOUT_PIN_10 AFIO_EVCR_PIN_PX10 /*!< EVENTOUT on pin 10 */
-#define AFIO_EVENTOUT_PIN_11 AFIO_EVCR_PIN_PX11 /*!< EVENTOUT on pin 11 */
-#define AFIO_EVENTOUT_PIN_12 AFIO_EVCR_PIN_PX12 /*!< EVENTOUT on pin 12 */
-#define AFIO_EVENTOUT_PIN_13 AFIO_EVCR_PIN_PX13 /*!< EVENTOUT on pin 13 */
-#define AFIO_EVENTOUT_PIN_14 AFIO_EVCR_PIN_PX14 /*!< EVENTOUT on pin 14 */
-#define AFIO_EVENTOUT_PIN_15 AFIO_EVCR_PIN_PX15 /*!< EVENTOUT on pin 15 */
-
-#define IS_AFIO_EVENTOUT_PIN(__PIN__) (((__PIN__) == AFIO_EVENTOUT_PIN_0) || \
- ((__PIN__) == AFIO_EVENTOUT_PIN_1) || \
- ((__PIN__) == AFIO_EVENTOUT_PIN_2) || \
- ((__PIN__) == AFIO_EVENTOUT_PIN_3) || \
- ((__PIN__) == AFIO_EVENTOUT_PIN_4) || \
- ((__PIN__) == AFIO_EVENTOUT_PIN_5) || \
- ((__PIN__) == AFIO_EVENTOUT_PIN_6) || \
- ((__PIN__) == AFIO_EVENTOUT_PIN_7) || \
- ((__PIN__) == AFIO_EVENTOUT_PIN_8) || \
- ((__PIN__) == AFIO_EVENTOUT_PIN_9) || \
- ((__PIN__) == AFIO_EVENTOUT_PIN_10) || \
- ((__PIN__) == AFIO_EVENTOUT_PIN_11) || \
- ((__PIN__) == AFIO_EVENTOUT_PIN_12) || \
- ((__PIN__) == AFIO_EVENTOUT_PIN_13) || \
- ((__PIN__) == AFIO_EVENTOUT_PIN_14) || \
- ((__PIN__) == AFIO_EVENTOUT_PIN_15))
-/**
- * @}
- */
-
-/** @defgroup GPIOEx_EVENTOUT_PORT EVENTOUT Port
- * @{
- */
-
-#define AFIO_EVENTOUT_PORT_A AFIO_EVCR_PORT_PA /*!< EVENTOUT on port A */
-#define AFIO_EVENTOUT_PORT_B AFIO_EVCR_PORT_PB /*!< EVENTOUT on port B */
-#define AFIO_EVENTOUT_PORT_C AFIO_EVCR_PORT_PC /*!< EVENTOUT on port C */
-#define AFIO_EVENTOUT_PORT_D AFIO_EVCR_PORT_PD /*!< EVENTOUT on port D */
-#define AFIO_EVENTOUT_PORT_E AFIO_EVCR_PORT_PE /*!< EVENTOUT on port E */
-
-#define IS_AFIO_EVENTOUT_PORT(__PORT__) (((__PORT__) == AFIO_EVENTOUT_PORT_A) || \
- ((__PORT__) == AFIO_EVENTOUT_PORT_B) || \
- ((__PORT__) == AFIO_EVENTOUT_PORT_C) || \
- ((__PORT__) == AFIO_EVENTOUT_PORT_D) || \
- ((__PORT__) == AFIO_EVENTOUT_PORT_E))
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/** @defgroup GPIOEx_AFIO_AF_REMAPPING Alternate Function Remapping
- * @brief This section propose definition to remap the alternate function to some other port/pins.
- * @{
- */
-
-/**
- * @brief Enable the remapping of SPI1 alternate function NSS, SCK, MISO and MOSI.
- * @note ENABLE: Remap (NSS/PA15, SCK/PB3, MISO/PB4, MOSI/PB5)
- * @retval None
- */
-#define __HAL_AFIO_REMAP_SPI1_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_SPI1_REMAP)
-
-/**
- * @brief Disable the remapping of SPI1 alternate function NSS, SCK, MISO and MOSI.
- * @note DISABLE: No remap (NSS/PA4, SCK/PA5, MISO/PA6, MOSI/PA7)
- * @retval None
- */
-#define __HAL_AFIO_REMAP_SPI1_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_SPI1_REMAP)
-
-/**
- * @brief Enable the remapping of I2C1 alternate function SCL and SDA.
- * @note ENABLE: Remap (SCL/PB8, SDA/PB9)
- * @retval None
- */
-#define __HAL_AFIO_REMAP_I2C1_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_I2C1_REMAP)
-
-/**
- * @brief Disable the remapping of I2C1 alternate function SCL and SDA.
- * @note DISABLE: No remap (SCL/PB6, SDA/PB7)
- * @retval None
- */
-#define __HAL_AFIO_REMAP_I2C1_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_I2C1_REMAP)
-
-/**
- * @brief Enable the remapping of USART1 alternate function TX and RX.
- * @note ENABLE: Remap (TX/PB6, RX/PB7)
- * @retval None
- */
-#define __HAL_AFIO_REMAP_USART1_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_USART1_REMAP)
-
-/**
- * @brief Disable the remapping of USART1 alternate function TX and RX.
- * @note DISABLE: No remap (TX/PA9, RX/PA10)
- * @retval None
- */
-#define __HAL_AFIO_REMAP_USART1_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_USART1_REMAP)
-
-/**
- * @brief Enable the remapping of USART2 alternate function CTS, RTS, CK, TX and RX.
- * @note ENABLE: Remap (CTS/PD3, RTS/PD4, TX/PD5, RX/PD6, CK/PD7)
- * @retval None
- */
-#define __HAL_AFIO_REMAP_USART2_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_USART2_REMAP)
-
-/**
- * @brief Disable the remapping of USART2 alternate function CTS, RTS, CK, TX and RX.
- * @note DISABLE: No remap (CTS/PA0, RTS/PA1, TX/PA2, RX/PA3, CK/PA4)
- * @retval None
- */
-#define __HAL_AFIO_REMAP_USART2_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_USART2_REMAP)
-
-/**
- * @brief Enable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX.
- * @note ENABLE: Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12)
- * @retval None
- */
-#define __HAL_AFIO_REMAP_USART3_ENABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_USART3_REMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP)
-
-/**
- * @brief Enable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX.
- * @note PARTIAL: Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14)
- * @retval None
- */
-#define __HAL_AFIO_REMAP_USART3_PARTIAL() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_USART3_REMAP, AFIO_MAPR_USART3_REMAP_PARTIALREMAP)
-
-/**
- * @brief Disable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX.
- * @note DISABLE: No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14)
- * @retval None
- */
-#define __HAL_AFIO_REMAP_USART3_DISABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_USART3_REMAP, AFIO_MAPR_USART3_REMAP_NOREMAP)
-
-/**
- * @brief Enable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN)
- * @note ENABLE: Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12)
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM1_ENABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP)
-
-/**
- * @brief Enable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN)
- * @note PARTIAL: Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1)
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM1_PARTIAL() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP, AFIO_MAPR_TIM1_REMAP_PARTIALREMAP)
-
-/**
- * @brief Disable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN)
- * @note DISABLE: No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15)
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM1_DISABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP, AFIO_MAPR_TIM1_REMAP_NOREMAP)
-
-/**
- * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR)
- * @note ENABLE: Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11)
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM2_ENABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP, AFIO_MAPR_TIM2_REMAP_FULLREMAP)
-
-/**
- * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR)
- * @note PARTIAL_2: Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11)
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM2_PARTIAL_2() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP, AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2)
-
-/**
- * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR)
- * @note PARTIAL_1: Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3)
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM2_PARTIAL_1() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP, AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1)
-
-/**
- * @brief Disable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR)
- * @note DISABLE: No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3)
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM2_DISABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP, AFIO_MAPR_TIM2_REMAP_NOREMAP)
-
-/**
- * @brief Enable the remapping of TIM3 alternate function channels 1 to 4
- * @note ENABLE: Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9)
- * @note TIM3_ETR on PE0 is not re-mapped.
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM3_ENABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP)
-
-/**
- * @brief Enable the remapping of TIM3 alternate function channels 1 to 4
- * @note PARTIAL: Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1)
- * @note TIM3_ETR on PE0 is not re-mapped.
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM3_PARTIAL() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP, AFIO_MAPR_TIM3_REMAP_PARTIALREMAP)
-
-/**
- * @brief Disable the remapping of TIM3 alternate function channels 1 to 4
- * @note DISABLE: No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1)
- * @note TIM3_ETR on PE0 is not re-mapped.
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM3_DISABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP, AFIO_MAPR_TIM3_REMAP_NOREMAP)
-
-/**
- * @brief Enable the remapping of TIM4 alternate function channels 1 to 4.
- * @note ENABLE: Full remap (TIM4_CH1/PD12, TIM4_CH2/PD13, TIM4_CH3/PD14, TIM4_CH4/PD15)
- * @note TIM4_ETR on PE0 is not re-mapped.
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM4_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM4_REMAP)
-
-/**
- * @brief Disable the remapping of TIM4 alternate function channels 1 to 4.
- * @note DISABLE: No remap (TIM4_CH1/PB6, TIM4_CH2/PB7, TIM4_CH3/PB8, TIM4_CH4/PB9)
- * @note TIM4_ETR on PE0 is not re-mapped.
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM4_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM4_REMAP)
-
-#if defined(AFIO_MAPR_CAN_REMAP_REMAP1)
-
-/**
- * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface.
- * @note CASE 1: CAN_RX mapped to PA11, CAN_TX mapped to PA12
- * @retval None
- */
-#define __HAL_AFIO_REMAP_CAN1_1() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_CAN_REMAP, AFIO_MAPR_CAN_REMAP_REMAP1)
-
-/**
- * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface.
- * @note CASE 2: CAN_RX mapped to PB8, CAN_TX mapped to PB9 (not available on 36-pin package)
- * @retval None
- */
-#define __HAL_AFIO_REMAP_CAN1_2() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_CAN_REMAP, AFIO_MAPR_CAN_REMAP_REMAP2)
-
-/**
- * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface.
- * @note CASE 3: CAN_RX mapped to PD0, CAN_TX mapped to PD1
- * @retval None
- */
-#define __HAL_AFIO_REMAP_CAN1_3() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_CAN_REMAP, AFIO_MAPR_CAN_REMAP_REMAP3)
-#endif
-
-/**
- * @brief Enable the remapping of PD0 and PD1. When the HSE oscillator is not used
- * (application running on internal 8 MHz RC) PD0 and PD1 can be mapped on OSC_IN and
- * OSC_OUT. This is available only on 36, 48 and 64 pins packages (PD0 and PD1 are available
- * on 100-pin and 144-pin packages, no need for remapping).
- * @note ENABLE: PD0 remapped on OSC_IN, PD1 remapped on OSC_OUT.
- * @retval None
- */
-#define __HAL_AFIO_REMAP_PD01_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_PD01_REMAP)
-
-/**
- * @brief Disable the remapping of PD0 and PD1. When the HSE oscillator is not used
- * (application running on internal 8 MHz RC) PD0 and PD1 can be mapped on OSC_IN and
- * OSC_OUT. This is available only on 36, 48 and 64 pins packages (PD0 and PD1 are available
- * on 100-pin and 144-pin packages, no need for remapping).
- * @note DISABLE: No remapping of PD0 and PD1
- * @retval None
- */
-#define __HAL_AFIO_REMAP_PD01_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_PD01_REMAP)
-
-#if defined(AFIO_MAPR_TIM5CH4_IREMAP)
-/**
- * @brief Enable the remapping of TIM5CH4.
- * @note ENABLE: LSI internal clock is connected to TIM5_CH4 input for calibration purpose.
- * @note This function is available only in high density value line devices.
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM5CH4_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM5CH4_IREMAP)
-
-/**
- * @brief Disable the remapping of TIM5CH4.
- * @note DISABLE: TIM5_CH4 is connected to PA3
- * @note This function is available only in high density value line devices.
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM5CH4_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM5CH4_IREMAP)
-#endif
-
-#if defined(AFIO_MAPR_ETH_REMAP)
-/**
- * @brief Enable the remapping of Ethernet MAC connections with the PHY.
- * @note ENABLE: Remap (RX_DV-CRS_DV/PD8, RXD0/PD9, RXD1/PD10, RXD2/PD11, RXD3/PD12)
- * @note This bit is available only in connectivity line devices and is reserved otherwise.
- * @retval None
- */
-#define __HAL_AFIO_REMAP_ETH_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_ETH_REMAP)
-
-/**
- * @brief Disable the remapping of Ethernet MAC connections with the PHY.
- * @note DISABLE: No remap (RX_DV-CRS_DV/PA7, RXD0/PC4, RXD1/PC5, RXD2/PB0, RXD3/PB1)
- * @note This bit is available only in connectivity line devices and is reserved otherwise.
- * @retval None
- */
-#define __HAL_AFIO_REMAP_ETH_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_ETH_REMAP)
-#endif
-
-#if defined(AFIO_MAPR_CAN2_REMAP)
-
-/**
- * @brief Enable the remapping of CAN2 alternate function CAN2_RX and CAN2_TX.
- * @note ENABLE: Remap (CAN2_RX/PB5, CAN2_TX/PB6)
- * @note This bit is available only in connectivity line devices and is reserved otherwise.
- * @retval None
- */
-#define __HAL_AFIO_REMAP_CAN2_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_CAN2_REMAP)
-
-/**
- * @brief Disable the remapping of CAN2 alternate function CAN2_RX and CAN2_TX.
- * @note DISABLE: No remap (CAN2_RX/PB12, CAN2_TX/PB13)
- * @note This bit is available only in connectivity line devices and is reserved otherwise.
- * @retval None
- */
-#define __HAL_AFIO_REMAP_CAN2_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_CAN2_REMAP)
-#endif
-
-#if defined(AFIO_MAPR_MII_RMII_SEL)
-/**
- * @brief Configures the Ethernet MAC internally for use with an external MII or RMII PHY.
- * @note ETH_RMII: Configure Ethernet MAC for connection with an RMII PHY
- * @note This bit is available only in connectivity line devices and is reserved otherwise.
- * @retval None
- */
-#define __HAL_AFIO_ETH_RMII() SET_BIT(AFIO->MAPR, AFIO_MAPR_MII_RMII_SEL)
-
-/**
- * @brief Configures the Ethernet MAC internally for use with an external MII or RMII PHY.
- * @note ETH_MII: Configure Ethernet MAC for connection with an MII PHY
- * @note This bit is available only in connectivity line devices and is reserved otherwise.
- * @retval None
- */
-#define __HAL_AFIO_ETH_MII() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_MII_RMII_SEL)
-#endif
-
-/**
- * @brief Enable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion).
- * @note ENABLE: ADC1 External Event injected conversion is connected to TIM8 Channel4.
- * @retval None
- */
-#define __HAL_AFIO_REMAP_ADC1_ETRGINJ_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_ADC1_ETRGINJ_REMAP)
-
-/**
- * @brief Disable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion).
- * @note DISABLE: ADC1 External trigger injected conversion is connected to EXTI15
- * @retval None
- */
-#define __HAL_AFIO_REMAP_ADC1_ETRGINJ_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_ADC1_ETRGINJ_REMAP)
-
-/**
- * @brief Enable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion).
- * @note ENABLE: ADC1 External Event regular conversion is connected to TIM8 TRG0.
- * @retval None
- */
-#define __HAL_AFIO_REMAP_ADC1_ETRGREG_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_ADC1_ETRGREG_REMAP)
-
-/**
- * @brief Disable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion).
- * @note DISABLE: ADC1 External trigger regular conversion is connected to EXTI11
- * @retval None
- */
-#define __HAL_AFIO_REMAP_ADC1_ETRGREG_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_ADC1_ETRGREG_REMAP)
-
-#if defined(AFIO_MAPR_ADC2_ETRGINJ_REMAP)
-
-/**
- * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger injected conversion).
- * @note ENABLE: ADC2 External Event injected conversion is connected to TIM8 Channel4.
- * @retval None
- */
-#define __HAL_AFIO_REMAP_ADC2_ETRGINJ_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_ADC2_ETRGINJ_REMAP)
-
-/**
- * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger injected conversion).
- * @note DISABLE: ADC2 External trigger injected conversion is connected to EXTI15
- * @retval None
- */
-#define __HAL_AFIO_REMAP_ADC2_ETRGINJ_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_ADC2_ETRGINJ_REMAP)
-#endif
-
-#if defined (AFIO_MAPR_ADC2_ETRGREG_REMAP)
-
-/**
- * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion).
- * @note ENABLE: ADC2 External Event regular conversion is connected to TIM8 TRG0.
- * @retval None
- */
-#define __HAL_AFIO_REMAP_ADC2_ETRGREG_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_ADC2_ETRGREG_REMAP)
-
-/**
- * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion).
- * @note DISABLE: ADC2 External trigger regular conversion is connected to EXTI11
- * @retval None
- */
-#define __HAL_AFIO_REMAP_ADC2_ETRGREG_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_ADC2_ETRGREG_REMAP)
-#endif
-
-/**
- * @brief Enable the Serial wire JTAG configuration
- * @note ENABLE: Full SWJ (JTAG-DP + SW-DP): Reset State
- * @retval None
- */
-#define __HAL_AFIO_REMAP_SWJ_ENABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_SWJ_CFG, AFIO_MAPR_SWJ_CFG_RESET)
-
-/**
- * @brief Enable the Serial wire JTAG configuration
- * @note NONJTRST: Full SWJ (JTAG-DP + SW-DP) but without NJTRST
- * @retval None
- */
-#define __HAL_AFIO_REMAP_SWJ_NONJTRST() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_SWJ_CFG, AFIO_MAPR_SWJ_CFG_NOJNTRST)
-
-/**
- * @brief Enable the Serial wire JTAG configuration
- * @note NOJTAG: JTAG-DP Disabled and SW-DP Enabled
- * @retval None
- */
-#define __HAL_AFIO_REMAP_SWJ_NOJTAG() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_SWJ_CFG, AFIO_MAPR_SWJ_CFG_JTAGDISABLE)
-
-/**
- * @brief Disable the Serial wire JTAG configuration
- * @note DISABLE: JTAG-DP Disabled and SW-DP Disabled
- * @retval None
- */
-#define __HAL_AFIO_REMAP_SWJ_DISABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_SWJ_CFG, AFIO_MAPR_SWJ_CFG_DISABLE)
-
-#if defined(AFIO_MAPR_SPI3_REMAP)
-
-/**
- * @brief Enable the remapping of SPI3 alternate functions SPI3_NSS/I2S3_WS, SPI3_SCK/I2S3_CK, SPI3_MISO, SPI3_MOSI/I2S3_SD.
- * @note ENABLE: Remap (SPI3_NSS-I2S3_WS/PA4, SPI3_SCK-I2S3_CK/PC10, SPI3_MISO/PC11, SPI3_MOSI-I2S3_SD/PC12)
- * @note This bit is available only in connectivity line devices and is reserved otherwise.
- * @retval None
- */
-#define __HAL_AFIO_REMAP_SPI3_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_SPI3_REMAP)
-
-/**
- * @brief Disable the remapping of SPI3 alternate functions SPI3_NSS/I2S3_WS, SPI3_SCK/I2S3_CK, SPI3_MISO, SPI3_MOSI/I2S3_SD.
- * @note DISABLE: No remap (SPI3_NSS-I2S3_WS/PA15, SPI3_SCK-I2S3_CK/PB3, SPI3_MISO/PB4, SPI3_MOSI-I2S3_SD/PB5).
- * @note This bit is available only in connectivity line devices and is reserved otherwise.
- * @retval None
- */
-#define __HAL_AFIO_REMAP_SPI3_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_SPI3_REMAP)
-#endif
-
-#if defined(AFIO_MAPR_TIM2ITR1_IREMAP)
-
-/**
- * @brief Control of TIM2_ITR1 internal mapping.
- * @note TO_USB: Connect USB OTG SOF (Start of Frame) output to TIM2_ITR1 for calibration purposes.
- * @note This bit is available only in connectivity line devices and is reserved otherwise.
- * @retval None
- */
-#define __HAL_AFIO_TIM2ITR1_TO_USB() SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM2ITR1_IREMAP)
-
-/**
- * @brief Control of TIM2_ITR1 internal mapping.
- * @note TO_ETH: Connect TIM2_ITR1 internally to the Ethernet PTP output for calibration purposes.
- * @note This bit is available only in connectivity line devices and is reserved otherwise.
- * @retval None
- */
-#define __HAL_AFIO_TIM2ITR1_TO_ETH() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM2ITR1_IREMAP)
-#endif
-
-#if defined(AFIO_MAPR_PTP_PPS_REMAP)
-
-/**
- * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion).
- * @note ENABLE: PTP_PPS is output on PB5 pin.
- * @note This bit is available only in connectivity line devices and is reserved otherwise.
- * @retval None
- */
-#define __HAL_AFIO_ETH_PTP_PPS_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_PTP_PPS_REMAP)
-
-/**
- * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion).
- * @note DISABLE: PTP_PPS not output on PB5 pin.
- * @note This bit is available only in connectivity line devices and is reserved otherwise.
- * @retval None
- */
-#define __HAL_AFIO_ETH_PTP_PPS_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_PTP_PPS_REMAP)
-#endif
-
-#if defined(AFIO_MAPR2_TIM9_REMAP)
-
-/**
- * @brief Enable the remapping of TIM9_CH1 and TIM9_CH2.
- * @note ENABLE: Remap (TIM9_CH1 on PE5 and TIM9_CH2 on PE6).
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM9_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM9_REMAP)
-
-/**
- * @brief Disable the remapping of TIM9_CH1 and TIM9_CH2.
- * @note DISABLE: No remap (TIM9_CH1 on PA2 and TIM9_CH2 on PA3).
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM9_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM9_REMAP)
-#endif
-
-#if defined(AFIO_MAPR2_TIM10_REMAP)
-
-/**
- * @brief Enable the remapping of TIM10_CH1.
- * @note ENABLE: Remap (TIM10_CH1 on PF6).
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM10_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM10_REMAP)
-
-/**
- * @brief Disable the remapping of TIM10_CH1.
- * @note DISABLE: No remap (TIM10_CH1 on PB8).
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM10_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM10_REMAP)
-#endif
-
-#if defined(AFIO_MAPR2_TIM11_REMAP)
-/**
- * @brief Enable the remapping of TIM11_CH1.
- * @note ENABLE: Remap (TIM11_CH1 on PF7).
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM11_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM11_REMAP)
-
-/**
- * @brief Disable the remapping of TIM11_CH1.
- * @note DISABLE: No remap (TIM11_CH1 on PB9).
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM11_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM11_REMAP)
-#endif
-
-#if defined(AFIO_MAPR2_TIM13_REMAP)
-
-/**
- * @brief Enable the remapping of TIM13_CH1.
- * @note ENABLE: Remap STM32F100:(TIM13_CH1 on PF8). Others:(TIM13_CH1 on PB0).
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM13_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM13_REMAP)
-
-/**
- * @brief Disable the remapping of TIM13_CH1.
- * @note DISABLE: No remap STM32F100:(TIM13_CH1 on PA6). Others:(TIM13_CH1 on PC8).
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM13_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM13_REMAP)
-#endif
-
-#if defined(AFIO_MAPR2_TIM14_REMAP)
-
-/**
- * @brief Enable the remapping of TIM14_CH1.
- * @note ENABLE: Remap STM32F100:(TIM14_CH1 on PB1). Others:(TIM14_CH1 on PF9).
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM14_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM14_REMAP)
-
-/**
- * @brief Disable the remapping of TIM14_CH1.
- * @note DISABLE: No remap STM32F100:(TIM14_CH1 on PC9). Others:(TIM14_CH1 on PA7).
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM14_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM14_REMAP)
-#endif
-
-#if defined(AFIO_MAPR2_FSMC_NADV_REMAP)
-
-/**
- * @brief Controls the use of the optional FSMC_NADV signal.
- * @note DISCONNECTED: The NADV signal is not connected. The I/O pin can be used by another peripheral.
- * @retval None
- */
-#define __HAL_AFIO_FSMCNADV_DISCONNECTED() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_FSMC_NADV_REMAP)
-
-/**
- * @brief Controls the use of the optional FSMC_NADV signal.
- * @note CONNECTED: The NADV signal is connected to the output (default).
- * @retval None
- */
-#define __HAL_AFIO_FSMCNADV_CONNECTED() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_FSMC_NADV_REMAP)
-#endif
-
-#if defined(AFIO_MAPR2_TIM15_REMAP)
-
-/**
- * @brief Enable the remapping of TIM15_CH1 and TIM15_CH2.
- * @note ENABLE: Remap (TIM15_CH1 on PB14 and TIM15_CH2 on PB15).
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM15_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM15_REMAP)
-
-/**
- * @brief Disable the remapping of TIM15_CH1 and TIM15_CH2.
- * @note DISABLE: No remap (TIM15_CH1 on PA2 and TIM15_CH2 on PA3).
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM15_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM15_REMAP)
-#endif
-
-#if defined(AFIO_MAPR2_TIM16_REMAP)
-
-/**
- * @brief Enable the remapping of TIM16_CH1.
- * @note ENABLE: Remap (TIM16_CH1 on PA6).
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM16_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM16_REMAP)
-
-/**
- * @brief Disable the remapping of TIM16_CH1.
- * @note DISABLE: No remap (TIM16_CH1 on PB8).
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM16_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM16_REMAP)
-#endif
-
-#if defined(AFIO_MAPR2_TIM17_REMAP)
-
-/**
- * @brief Enable the remapping of TIM17_CH1.
- * @note ENABLE: Remap (TIM17_CH1 on PA7).
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM17_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM17_REMAP)
-
-/**
- * @brief Disable the remapping of TIM17_CH1.
- * @note DISABLE: No remap (TIM17_CH1 on PB9).
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM17_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM17_REMAP)
-#endif
-
-#if defined(AFIO_MAPR2_CEC_REMAP)
-
-/**
- * @brief Enable the remapping of CEC.
- * @note ENABLE: Remap (CEC on PB10).
- * @retval None
- */
-#define __HAL_AFIO_REMAP_CEC_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_CEC_REMAP)
-
-/**
- * @brief Disable the remapping of CEC.
- * @note DISABLE: No remap (CEC on PB8).
- * @retval None
- */
-#define __HAL_AFIO_REMAP_CEC_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_CEC_REMAP)
-#endif
-
-#if defined(AFIO_MAPR2_TIM1_DMA_REMAP)
-
-/**
- * @brief Controls the mapping of the TIM1_CH1 TIM1_CH2 DMA requests onto the DMA1 channels.
- * @note ENABLE: Remap (TIM1_CH1 DMA request/DMA1 Channel6, TIM1_CH2 DMA request/DMA1 Channel6)
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM1DMA_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM1_DMA_REMAP)
-
-/**
- * @brief Controls the mapping of the TIM1_CH1 TIM1_CH2 DMA requests onto the DMA1 channels.
- * @note DISABLE: No remap (TIM1_CH1 DMA request/DMA1 Channel2, TIM1_CH2 DMA request/DMA1 Channel3).
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM1DMA_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM1_DMA_REMAP)
-#endif
-
-#if defined(AFIO_MAPR2_TIM67_DAC_DMA_REMAP)
-
-/**
- * @brief Controls the mapping of the TIM6_DAC1 and TIM7_DAC2 DMA requests onto the DMA1 channels.
- * @note ENABLE: Remap (TIM6_DAC1 DMA request/DMA1 Channel3, TIM7_DAC2 DMA request/DMA1 Channel4)
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM67DACDMA_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM67_DAC_DMA_REMAP)
-
-/**
- * @brief Controls the mapping of the TIM6_DAC1 and TIM7_DAC2 DMA requests onto the DMA1 channels.
- * @note DISABLE: No remap (TIM6_DAC1 DMA request/DMA2 Channel3, TIM7_DAC2 DMA request/DMA2 Channel4)
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM67DACDMA_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM67_DAC_DMA_REMAP)
-#endif
-
-#if defined(AFIO_MAPR2_TIM12_REMAP)
-
-/**
- * @brief Enable the remapping of TIM12_CH1 and TIM12_CH2.
- * @note ENABLE: Remap (TIM12_CH1 on PB12 and TIM12_CH2 on PB13).
- * @note This bit is available only in high density value line devices.
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM12_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM12_REMAP)
-
-/**
- * @brief Disable the remapping of TIM12_CH1 and TIM12_CH2.
- * @note DISABLE: No remap (TIM12_CH1 on PC4 and TIM12_CH2 on PC5).
- * @note This bit is available only in high density value line devices.
- * @retval None
- */
-#define __HAL_AFIO_REMAP_TIM12_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM12_REMAP)
-#endif
-
-#if defined(AFIO_MAPR2_MISC_REMAP)
-
-/**
- * @brief Miscellaneous features remapping.
- * This bit is set and cleared by software. It controls miscellaneous features.
- * The DMA2 channel 5 interrupt position in the vector table.
- * The timer selection for DAC trigger 3 (TSEL[2:0] = 011, for more details refer to the DAC_CR register).
- * @note ENABLE: DMA2 channel 5 interrupt is mapped separately at position 60 and TIM15 TRGO event is
- * selected as DAC Trigger 3, TIM15 triggers TIM1/3.
- * @note This bit is available only in high density value line devices.
- * @retval None
- */
-#define __HAL_AFIO_REMAP_MISC_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_MISC_REMAP)
-
-/**
- * @brief Miscellaneous features remapping.
- * This bit is set and cleared by software. It controls miscellaneous features.
- * The DMA2 channel 5 interrupt position in the vector table.
- * The timer selection for DAC trigger 3 (TSEL[2:0] = 011, for more details refer to the DAC_CR register).
- * @note DISABLE: DMA2 channel 5 interrupt is mapped with DMA2 channel 4 at position 59, TIM5 TRGO
- * event is selected as DAC Trigger 3, TIM5 triggers TIM1/3.
- * @note This bit is available only in high density value line devices.
- * @retval None
- */
-#define __HAL_AFIO_REMAP_MISC_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_MISC_REMAP)
-#endif
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/** @defgroup GPIOEx_Private_Macros GPIOEx Private Macros
- * @{
- */
-#if defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)
-#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
- ((__GPIOx__) == (GPIOB))? 1U :\
- ((__GPIOx__) == (GPIOC))? 2U :3U)
-#elif defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F103xB) || defined(STM32F105xC) || defined(STM32F107xC)
-#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
- ((__GPIOx__) == (GPIOB))? 1U :\
- ((__GPIOx__) == (GPIOC))? 2U :\
- ((__GPIOx__) == (GPIOD))? 3U :4U)
-#elif defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
-#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
- ((__GPIOx__) == (GPIOB))? 1U :\
- ((__GPIOx__) == (GPIOC))? 2U :\
- ((__GPIOx__) == (GPIOD))? 3U :\
- ((__GPIOx__) == (GPIOE))? 4U :\
- ((__GPIOx__) == (GPIOF))? 5U :6U)
-#endif
-
-/**
- * @}
- */
-
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-
-/** @addtogroup GPIOEx_Exported_Functions
- * @{
- */
-
-/** @addtogroup GPIOEx_Exported_Functions_Group1
- * @{
- */
-void HAL_GPIOEx_ConfigEventout(uint32_t GPIO_PortSource, uint32_t GPIO_PinSource);
-void HAL_GPIOEx_EnableEventout(void);
-void HAL_GPIOEx_DisableEventout(void);
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F1xx_HAL_GPIO_EX_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h
deleted file mode 100644
index 8dcc87f..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h
+++ /dev/null
@@ -1,853 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_pcd.h
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief Header file of PCD HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F1xx_HAL_PCD_H
-#define __STM32F1xx_HAL_PCD_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#if defined(STM32F102x6) || defined(STM32F102xB) || \
- defined(STM32F103x6) || defined(STM32F103xB) || \
- defined(STM32F103xE) || defined(STM32F103xG) || \
- defined(STM32F105xC) || defined(STM32F107xC)
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_ll_usb.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup PCD
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup PCD_Exported_Types PCD Exported Types
- * @{
- */
-
-/**
- * @brief PCD State structure definition
- */
-typedef enum
-{
- HAL_PCD_STATE_RESET = 0x00,
- HAL_PCD_STATE_READY = 0x01,
- HAL_PCD_STATE_ERROR = 0x02,
- HAL_PCD_STATE_BUSY = 0x03,
- HAL_PCD_STATE_TIMEOUT = 0x04
-} PCD_StateTypeDef;
-
-#if defined (USB)
-/**
- * @brief PCD double buffered endpoint direction
- */
-typedef enum
-{
- PCD_EP_DBUF_OUT,
- PCD_EP_DBUF_IN,
- PCD_EP_DBUF_ERR,
-}PCD_EP_DBUF_DIR;
-
-/**
- * @brief PCD endpoint buffer number
- */
-typedef enum
-{
- PCD_EP_NOBUF,
- PCD_EP_BUF0,
- PCD_EP_BUF1
-}PCD_EP_BUF_NUM;
-#endif /* USB */
-
-#if defined (USB_OTG_FS)
-typedef USB_OTG_GlobalTypeDef PCD_TypeDef;
-typedef USB_OTG_CfgTypeDef PCD_InitTypeDef;
-typedef USB_OTG_EPTypeDef PCD_EPTypeDef;
-#endif /* USB_OTG_FS */
-
-#if defined (USB)
-typedef USB_TypeDef PCD_TypeDef;
-typedef USB_CfgTypeDef PCD_InitTypeDef;
-typedef USB_EPTypeDef PCD_EPTypeDef;
-#endif /* USB */
-
-/**
- * @brief PCD Handle Structure definition
- */
-typedef struct
-{
- PCD_TypeDef *Instance; /*!< Register base address */
- PCD_InitTypeDef Init; /*!< PCD required parameters */
- __IO uint8_t USB_Address; /*!< USB Address: not used by USB OTG FS */
- PCD_EPTypeDef IN_ep[15]; /*!< IN endpoint parameters */
- PCD_EPTypeDef OUT_ep[15]; /*!< OUT endpoint parameters */
- HAL_LockTypeDef Lock; /*!< PCD peripheral status */
- __IO PCD_StateTypeDef State; /*!< PCD communication state */
- uint32_t Setup[12]; /*!< Setup packet buffer */
- void *pData; /*!< Pointer to upper stack Handler */
-} PCD_HandleTypeDef;
-
-/**
- * @}
- */
-
-/* Include PCD HAL Extension module */
-#include "stm32f1xx_hal_pcd_ex.h"
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup PCD_Exported_Constants PCD Exported Constants
- * @{
- */
-
-/** @defgroup PCD_Speed PCD Speed
- * @{
- */
-#define PCD_SPEED_HIGH 0 /* Not Supported */
-#define PCD_SPEED_HIGH_IN_FULL 1 /* Not Supported */
-#define PCD_SPEED_FULL 2
-/**
- * @}
- */
-
-/** @defgroup PCD_PHY_Module PCD PHY Module
- * @{
- */
-#define PCD_PHY_EMBEDDED 2
-/**
- * @}
- */
-
-/** @defgroup PCD_Turnaround_Timeout Turnaround Timeout Value
- * @{
- */
-#ifndef USBD_FS_TRDT_VALUE
- #define USBD_FS_TRDT_VALUE 5
-#endif /* USBD_FS_TRDT_VALUE */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macros -----------------------------------------------------------*/
-/** @defgroup PCD_Exported_Macros PCD Exported Macros
- * @brief macros to handle interrupts and specific clock configurations
- * @{
- */
-#if defined (USB_OTG_FS)
-
-#define __HAL_PCD_ENABLE(__HANDLE__) USB_EnableGlobalInt ((__HANDLE__)->Instance)
-#define __HAL_PCD_DISABLE(__HANDLE__) USB_DisableGlobalInt ((__HANDLE__)->Instance)
-
-#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
-#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__))
-#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0)
-
-#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= \
- ~(USB_OTG_PCGCCTL_STOPCLK)
-
-#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK
-
-#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE))&0x10)
-
-#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_OTG_FS_WAKEUP_EXTI_LINE
-#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE)
-#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_FS_WAKEUP_EXTI_LINE)
-#define __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = USB_OTG_FS_WAKEUP_EXTI_LINE
-
-#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE() \
- do{ \
- EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE); \
- EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE; \
- } while(0)
-
-#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE() \
- do{ \
- EXTI->FTSR |= (USB_OTG_FS_WAKEUP_EXTI_LINE); \
- EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE); \
- } while(0)
-
-#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE() \
- do{ \
- EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE); \
- EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE); \
- EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE; \
- EXTI->FTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE; \
- } while(0)
-
-#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= USB_OTG_FS_WAKEUP_EXTI_LINE)
-#endif /* USB_OTG_FS */
-
-#if defined (USB)
-#define __HAL_PCD_ENABLE(__HANDLE__) USB_EnableGlobalInt ((__HANDLE__)->Instance)
-#define __HAL_PCD_DISABLE(__HANDLE__) USB_DisableGlobalInt ((__HANDLE__)->Instance)
-#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
-#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) &= ~(__INTERRUPT__))
-
-#define __HAL_USB_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_WAKEUP_EXTI_LINE
-#define __HAL_USB_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_WAKEUP_EXTI_LINE)
-#define __HAL_USB_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_WAKEUP_EXTI_LINE)
-#define __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = USB_WAKEUP_EXTI_LINE
-
-#define __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE() \
- do{ \
- EXTI->FTSR &= ~(USB_WAKEUP_EXTI_LINE); \
- EXTI->RTSR |= USB_WAKEUP_EXTI_LINE; \
- } while(0)
-
-#define __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE() \
- do{ \
- EXTI->FTSR |= (USB_WAKEUP_EXTI_LINE); \
- EXTI->RTSR &= ~(USB_WAKEUP_EXTI_LINE); \
- } while(0)
-
-#define __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE() \
- do{ \
- EXTI->RTSR &= ~(USB_WAKEUP_EXTI_LINE); \
- EXTI->FTSR &= ~(USB_WAKEUP_EXTI_LINE); \
- EXTI->RTSR |= USB_WAKEUP_EXTI_LINE; \
- EXTI->FTSR |= USB_WAKEUP_EXTI_LINE; \
- } while(0)
-#endif /* USB */
-
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup PCD_Exported_Functions PCD Exported Functions
- * @{
- */
-
-/* Initialization/de-initialization functions ********************************/
-/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
- * @{
- */
-HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_DeInit (PCD_HandleTypeDef *hpcd);
-void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
-/**
- * @}
- */
-
-/* I/O operation functions ***************************************************/
-/* Non-Blocking mode: Interrupt */
-/** @addtogroup PCD_Exported_Functions_Group2 IO operation functions
- * @{
- */
-HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
-
-void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
-void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
-void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
-void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
-void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
-/**
- * @}
- */
-
-/* Peripheral Control functions **********************************************/
-/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions
- * @{
- */
-HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
-HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
-HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
-HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
-HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
-uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
-HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
-HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
-HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
-HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
-/**
- * @}
- */
-
-/* Peripheral State functions ************************************************/
-/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions
- * @{
- */
-PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Private constants ---------------------------------------------------------*/
-/** @defgroup PCD_Private_Constants PCD Private Constants
- * @{
- */
-/** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt
- * @{
- */
-#if defined (USB_OTG_FS)
-#define USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE ((uint32_t)0x08)
-#define USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE ((uint32_t)0x0C)
-#define USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE ((uint32_t)0x10)
-
-#define USB_OTG_FS_WAKEUP_EXTI_LINE ((uint32_t)0x00040000) /*!< External interrupt line 18 Connected to the USB EXTI Line */
-#endif /* USB_OTG_FS */
-
-#if defined (USB)
-#define USB_WAKEUP_EXTI_LINE ((uint32_t)0x00040000) /*!< External interrupt line 18 Connected to the USB EXTI Line */
-#endif /* USB */
-/**
- * @}
- */
-
-#if defined (USB)
-/** @defgroup PCD_EP0_MPS PCD EP0 MPS
- * @{
- */
-#define PCD_EP0MPS_64 DEP0CTL_MPS_64
-#define PCD_EP0MPS_32 DEP0CTL_MPS_32
-#define PCD_EP0MPS_16 DEP0CTL_MPS_16
-#define PCD_EP0MPS_08 DEP0CTL_MPS_8
-/**
- * @}
- */
-
-/** @defgroup PCD_ENDP PCD ENDP
- * @{
- */
-#define PCD_ENDP0 ((uint8_t)0)
-#define PCD_ENDP1 ((uint8_t)1)
-#define PCD_ENDP2 ((uint8_t)2)
-#define PCD_ENDP3 ((uint8_t)3)
-#define PCD_ENDP4 ((uint8_t)4)
-#define PCD_ENDP5 ((uint8_t)5)
-#define PCD_ENDP6 ((uint8_t)6)
-#define PCD_ENDP7 ((uint8_t)7)
-/**
- * @}
- */
-
-/** @defgroup PCD_ENDP_Kind PCD Endpoint Kind
- * @{
- */
-#define PCD_SNG_BUF 0
-#define PCD_DBL_BUF 1
-/**
- * @}
- */
-#endif /* USB */
-/**
- * @}
- */
-
-/* Private macros ------------------------------------------------------------*/
-/** @addtogroup PCD_Private_Macros PCD Private Macros
- * @{
- */
-#if defined (USB)
-/* SetENDPOINT */
-#define PCD_SET_ENDPOINT(USBx, bEpNum,wRegValue) (*(&(USBx)->EP0R + (bEpNum) * 2)= (uint16_t)(wRegValue))
-
-/* GetENDPOINT */
-#define PCD_GET_ENDPOINT(USBx, bEpNum) (*(&(USBx)->EP0R + (bEpNum) * 2))
-
-/* ENDPOINT transfer */
-#define USB_EP0StartXfer USB_EPStartXfer
-
-/**
- * @brief sets the type in the endpoint register(bits EP_TYPE[1:0])
- * @param USBx: USB peripheral instance register address.
- * @param bEpNum: Endpoint Number.
- * @param wType: Endpoint Type.
- * @retval None
- */
-#define PCD_SET_EPTYPE(USBx, bEpNum,wType) (PCD_SET_ENDPOINT((USBx), (bEpNum),\
- ((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_MASK) | (wType) )))
-
-/**
- * @brief gets the type in the endpoint register(bits EP_TYPE[1:0])
- * @param USBx: USB peripheral instance register address.
- * @param bEpNum: Endpoint Number.
- * @retval Endpoint Type
- */
-#define PCD_GET_EPTYPE(USBx, bEpNum) (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_FIELD)
-
-/**
- * @brief free buffer used from the application realizing it to the line
- toggles bit SW_BUF in the double buffered endpoint register
- * @param USBx: USB peripheral instance register address.
- * @param bEpNum: Endpoint Number.
- * @param bDir: Direction
- * @retval None
- */
-#define PCD_FreeUserBuffer(USBx, bEpNum, bDir)\
-{\
- if ((bDir) == PCD_EP_DBUF_OUT)\
- { /* OUT double buffered endpoint */\
- PCD_TX_DTOG((USBx), (bEpNum));\
- }\
- else if ((bDir) == PCD_EP_DBUF_IN)\
- { /* IN double buffered endpoint */\
- PCD_RX_DTOG((USBx), (bEpNum));\
- }\
-}
-
-/**
- * @brief gets direction of the double buffered endpoint
- * @param USBx: USB peripheral instance register address.
- * @param bEpNum: Endpoint Number.
- * @retval EP_DBUF_OUT, EP_DBUF_IN,
- * EP_DBUF_ERR if the endpoint counter not yet programmed.
- */
-#define PCD_GET_DB_DIR(USBx, bEpNum)\
-{\
- if ((uint16_t)(*PCD_EP_RX_CNT((USBx), (bEpNum)) & 0xFC00) != 0)\
- return(PCD_EP_DBUF_OUT);\
- else if (((uint16_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x03FF) != 0)\
- return(PCD_EP_DBUF_IN);\
- else\
- return(PCD_EP_DBUF_ERR);\
-}
-
-/**
- * @brief sets the status for tx transfer (bits STAT_TX[1:0]).
- * @param USBx: USB peripheral instance register address.
- * @param bEpNum: Endpoint Number.
- * @param wState: new state
- * @retval None
- */
-#define PCD_SET_EP_TX_STATUS(USBx, bEpNum, wState) { register uint16_t _wRegVal;\
- \
- _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_DTOGMASK;\
- /* toggle first bit ? */ \
- if((USB_EPTX_DTOG1 & (wState))!= 0)\
- { \
- _wRegVal ^= USB_EPTX_DTOG1; \
- } \
- /* toggle second bit ? */ \
- if((USB_EPTX_DTOG2 & (wState))!= 0) \
- { \
- _wRegVal ^= USB_EPTX_DTOG2; \
- } \
- PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX));\
- } /* PCD_SET_EP_TX_STATUS */
-
-/**
- * @brief sets the status for rx transfer (bits STAT_TX[1:0])
- * @param USBx: USB peripheral instance register address.
- * @param bEpNum: Endpoint Number.
- * @param wState: new state
- * @retval None
- */
-#define PCD_SET_EP_RX_STATUS(USBx, bEpNum,wState) {\
- register uint16_t _wRegVal; \
- \
- _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_DTOGMASK;\
- /* toggle first bit ? */ \
- if((USB_EPRX_DTOG1 & (wState))!= 0) \
- { \
- _wRegVal ^= USB_EPRX_DTOG1; \
- } \
- /* toggle second bit ? */ \
- if((USB_EPRX_DTOG2 & (wState))!= 0) \
- { \
- _wRegVal ^= USB_EPRX_DTOG2; \
- } \
- PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX)); \
- } /* PCD_SET_EP_RX_STATUS */
-
-/**
- * @brief sets the status for rx & tx (bits STAT_TX[1:0] & STAT_RX[1:0])
- * @param USBx: USB peripheral instance register address.
- * @param bEpNum: Endpoint Number.
- * @param wStaterx: new state.
- * @param wStatetx: new state.
- * @retval None
- */
-#define PCD_SET_EP_TXRX_STATUS(USBx,bEpNum,wStaterx,wStatetx) {\
- register uint32_t _wRegVal; \
- \
- _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (USB_EPRX_DTOGMASK |USB_EPTX_STAT) ;\
- /* toggle first bit ? */ \
- if((USB_EPRX_DTOG1 & ((wStaterx)))!= 0) \
- { \
- _wRegVal ^= USB_EPRX_DTOG1; \
- } \
- /* toggle second bit ? */ \
- if((USB_EPRX_DTOG2 & (wStaterx))!= 0) \
- { \
- _wRegVal ^= USB_EPRX_DTOG2; \
- } \
- /* toggle first bit ? */ \
- if((USB_EPTX_DTOG1 & (wStatetx))!= 0) \
- { \
- _wRegVal ^= USB_EPTX_DTOG1; \
- } \
- /* toggle second bit ? */ \
- if((USB_EPTX_DTOG2 & (wStatetx))!= 0) \
- { \
- _wRegVal ^= USB_EPTX_DTOG2; \
- } \
- PCD_SET_ENDPOINT((USBx), (bEpNum), _wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX); \
- } /* PCD_SET_EP_TXRX_STATUS */
-
-/**
- * @brief gets the status for tx/rx transfer (bits STAT_TX[1:0]
- * /STAT_RX[1:0])
- * @param USBx: USB peripheral instance register address.
- * @param bEpNum: Endpoint Number.
- * @retval status
- */
-#define PCD_GET_EP_TX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_STAT)
-#define PCD_GET_EP_RX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_STAT)
-
-/**
- * @brief sets directly the VALID tx/rx-status into the endpoint register
- * @param USBx: USB peripheral instance register address.
- * @param bEpNum: Endpoint Number.
- * @retval None
- */
-#define PCD_SET_EP_TX_VALID(USBx, bEpNum) (PCD_SET_EP_TX_STATUS((USBx), (bEpNum), USB_EP_TX_VALID))
-#define PCD_SET_EP_RX_VALID(USBx, bEpNum) (PCD_SET_EP_RX_STATUS((USBx), (bEpNum), USB_EP_RX_VALID))
-
-/**
- * @brief checks stall condition in an endpoint.
- * @param USBx: USB peripheral instance register address.
- * @param bEpNum: Endpoint Number.
- * @retval TRUE = endpoint in stall condition.
- */
-#define PCD_GET_EP_TX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_TX_STATUS((USBx), (bEpNum)) \
- == USB_EP_TX_STALL)
-#define PCD_GET_EP_RX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_RX_STATUS((USBx), (bEpNum)) \
- == USB_EP_RX_STALL)
-
-/**
- * @brief set & clear EP_KIND bit.
- * @param USBx: USB peripheral instance register address.
- * @param bEpNum: Endpoint Number.
- * @retval None
- */
-#define PCD_SET_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
- (USB_EP_CTR_RX|USB_EP_CTR_TX|((PCD_GET_ENDPOINT((USBx), (bEpNum)) | USB_EP_KIND) & USB_EPREG_MASK))))
-#define PCD_CLEAR_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
- (USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPKIND_MASK))))
-
-/**
- * @brief Sets/clears directly STATUS_OUT bit in the endpoint register.
- * @param USBx: USB peripheral instance register address.
- * @param bEpNum: Endpoint Number.
- * @retval None
- */
-#define PCD_SET_OUT_STATUS(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum))
-#define PCD_CLEAR_OUT_STATUS(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum))
-
-/**
- * @brief Sets/clears directly EP_KIND bit in the endpoint register.
- * @param USBx: USB peripheral instance register address.
- * @param bEpNum: Endpoint Number.
- * @retval None
- */
-#define PCD_SET_EP_DBUF(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum))
-#define PCD_CLEAR_EP_DBUF(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum))
-
-/**
- * @brief Clears bit CTR_RX / CTR_TX in the endpoint register.
- * @param USBx: USB peripheral instance register address.
- * @param bEpNum: Endpoint Number.
- * @retval None
- */
-#define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum),\
- PCD_GET_ENDPOINT((USBx), (bEpNum)) & 0x7FFF & USB_EPREG_MASK))
-#define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum),\
- PCD_GET_ENDPOINT((USBx), (bEpNum)) & 0xFF7F & USB_EPREG_MASK))
-
-/**
- * @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register.
- * @param USBx: USB peripheral instance register address.
- * @param bEpNum: Endpoint Number.
- * @retval None
- */
-#define PCD_RX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
- USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_RX | (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK)))
-#define PCD_TX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
- USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_TX | (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK)))
-
-/**
- * @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register.
- * @param USBx: USB peripheral instance register address.
- * @param bEpNum: Endpoint Number.
- * @retval None
- */
-#define PCD_CLEAR_RX_DTOG(USBx, bEpNum) if((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_DTOG_RX) != 0)\
- { \
- PCD_RX_DTOG((USBx), (bEpNum)); \
- }
-#define PCD_CLEAR_TX_DTOG(USBx, bEpNum) if((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_DTOG_TX) != 0)\
- { \
- PCD_TX_DTOG((USBx), (bEpNum)); \
- }
-
-/**
- * @brief Sets address in an endpoint register.
- * @param USBx: USB peripheral instance register address.
- * @param bEpNum: Endpoint Number.
- * @param bAddr: Address.
- * @retval None
- */
-#define PCD_SET_EP_ADDRESS(USBx, bEpNum,bAddr) PCD_SET_ENDPOINT((USBx), (bEpNum),\
- USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK) | (bAddr))
-
-#define PCD_GET_EP_ADDRESS(USBx, bEpNum) ((uint8_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPADDR_FIELD))
-
-#define PCD_EP_TX_ADDRESS(USBx, bEpNum) ((uint32_t *)(((USBx)->BTABLE+(bEpNum)*8)*2+ ((uint32_t)(USBx) + 0x400)))
-#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint32_t *)(((USBx)->BTABLE+(bEpNum)*8+2)*2+ ((uint32_t)(USBx) + 0x400)))
-#define PCD_EP_RX_ADDRESS(USBx, bEpNum) ((uint32_t *)(((USBx)->BTABLE+(bEpNum)*8+4)*2+ ((uint32_t)(USBx) + 0x400)))
-#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint32_t *)(((USBx)->BTABLE+(bEpNum)*8+6)*2+ ((uint32_t)(USBx) + 0x400)))
-
-#define PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount) {\
- uint32_t *pdwReg = PCD_EP_RX_CNT((USBx), (bEpNum)); \
- PCD_SET_EP_CNT_RX_REG(pdwReg, (wCount));\
- }
-
-/**
- * @brief sets address of the tx/rx buffer.
- * @param USBx: USB peripheral instance register address.
- * @param bEpNum: Endpoint Number.
- * @param wAddr: address to be set (must be word aligned).
- * @retval None
- */
-#define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_TX_ADDRESS((USBx), (bEpNum)) = (((wAddr) >> 1) << 1))
-#define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_RX_ADDRESS((USBx), (bEpNum)) = (((wAddr) >> 1) << 1))
-
-/**
- * @brief Gets address of the tx/rx buffer.
- * @param USBx: USB peripheral instance register address.
- * @param bEpNum: Endpoint Number.
- * @retval address of the buffer.
- */
-#define PCD_GET_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_TX_ADDRESS((USBx), (bEpNum)))
-#define PCD_GET_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_RX_ADDRESS((USBx), (bEpNum)))
-
-/**
- * @brief Sets counter of rx buffer with no. of blocks.
- * @param dwReg: Register
- * @param wCount: Counter.
- * @param wNBlocks: no. of Blocks.
- * @retval None
- */
-#define PCD_CALC_BLK32(dwReg,wCount,wNBlocks) {\
- (wNBlocks) = (wCount) >> 5;\
- if(((wCount) & 0x1f) == 0)\
- { \
- (wNBlocks)--;\
- } \
- *pdwReg = (uint16_t)((uint16_t)((wNBlocks) << 10) | 0x8000); \
- }/* PCD_CALC_BLK32 */
-
-#define PCD_CALC_BLK2(dwReg,wCount,wNBlocks) {\
- (wNBlocks) = (wCount) >> 1;\
- if(((wCount) & 0x1) != 0)\
- { \
- (wNBlocks)++;\
- } \
- *pdwReg = (uint16_t)((wNBlocks) << 10);\
- }/* PCD_CALC_BLK2 */
-
-#define PCD_SET_EP_CNT_RX_REG(dwReg,wCount) {\
- uint16_t wNBlocks;\
- if((wCount) > 62) \
- { \
- PCD_CALC_BLK32((dwReg),(wCount),wNBlocks); \
- } \
- else \
- { \
- PCD_CALC_BLK2((dwReg),(wCount),wNBlocks); \
- } \
- }/* PCD_SET_EP_CNT_RX_REG */
-
-#define PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum,wCount) {\
- uint32_t *pdwReg = PCD_EP_TX_CNT((USBx), (bEpNum)); \
- PCD_SET_EP_CNT_RX_REG(pdwReg, (wCount));\
- }
-
-/**
- * @brief sets counter for the tx/rx buffer.
- * @param USBx: USB peripheral instance register address.
- * @param bEpNum: Endpoint Number.
- * @param wCount: Counter value.
- * @retval None
- */
-#define PCD_SET_EP_TX_CNT(USBx, bEpNum,wCount) (*PCD_EP_TX_CNT((USBx), (bEpNum)) = (wCount))
-
-
-/**
- * @brief gets counter of the tx buffer.
- * @param USBx: USB peripheral instance register address.
- * @param bEpNum: Endpoint Number.
- * @retval Counter value
- */
-#define PCD_GET_EP_TX_CNT(USBx, bEpNum) ((uint16_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x3ff)
-#define PCD_GET_EP_RX_CNT(USBx, bEpNum) ((uint16_t)(*PCD_EP_RX_CNT((USBx), (bEpNum))) & 0x3ff)
-
-/**
- * @brief Sets buffer 0/1 address in a double buffer endpoint.
- * @param USBx: USB peripheral instance register address.
- * @param bEpNum: Endpoint Number.
- * @param wBuf0Addr: buffer 0 address.
- * @retval Counter value
- */
-#define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum,wBuf0Addr) {PCD_SET_EP_TX_ADDRESS((USBx), (bEpNum), (wBuf0Addr));}
-#define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum,wBuf1Addr) {PCD_SET_EP_RX_ADDRESS((USBx), (bEpNum), (wBuf1Addr));}
-
-/**
- * @brief Sets addresses in a double buffer endpoint.
- * @param USBx: USB peripheral instance register address.
- * @param bEpNum: Endpoint Number.
- * @param wBuf0Addr: buffer 0 address.
- * @param wBuf1Addr = buffer 1 address.
- * @retval None
- */
-#define PCD_SET_EP_DBUF_ADDR(USBx, bEpNum,wBuf0Addr,wBuf1Addr) { \
- PCD_SET_EP_DBUF0_ADDR((USBx), (bEpNum), (wBuf0Addr));\
- PCD_SET_EP_DBUF1_ADDR((USBx), (bEpNum), (wBuf1Addr));\
- } /* PCD_SET_EP_DBUF_ADDR */
-
-/**
- * @brief Gets buffer 0/1 address of a double buffer endpoint.
- * @param USBx: USB peripheral instance register address.
- * @param bEpNum: Endpoint Number.
- * @retval None
- */
-#define PCD_GET_EP_DBUF0_ADDR(USBx, bEpNum) (PCD_GET_EP_TX_ADDRESS((USBx), (bEpNum)))
-#define PCD_GET_EP_DBUF1_ADDR(USBx, bEpNum) (PCD_GET_EP_RX_ADDRESS((USBx), (bEpNum)))
-
-/**
- * @brief Gets buffer 0/1 address of a double buffer endpoint.
- * @param USBx: USB peripheral instance register address.
- * @param bEpNum: Endpoint Number.
- * @param bDir: endpoint dir EP_DBUF_OUT = OUT
- * EP_DBUF_IN = IN
- * @param wCount: Counter value
- * @retval None
- */
-#define PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount) { \
- if((bDir) == PCD_EP_DBUF_OUT)\
- /* OUT endpoint */ \
- {PCD_SET_EP_RX_DBUF0_CNT((USBx), (bEpNum),(wCount));} \
- else if((bDir) == PCD_EP_DBUF_IN)\
- /* IN endpoint */ \
- *PCD_EP_TX_CNT((USBx), (bEpNum)) = (uint32_t)(wCount); \
- } /* SetEPDblBuf0Count*/
-
-#define PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount) { \
- if((bDir) == PCD_EP_DBUF_OUT)\
- {/* OUT endpoint */ \
- PCD_SET_EP_RX_CNT((USBx), (bEpNum),(wCount)); \
- } \
- else if((bDir) == PCD_EP_DBUF_IN)\
- {/* IN endpoint */ \
- *PCD_EP_TX_CNT((USBx), (bEpNum)) = (uint32_t)(wCount); \
- } \
- } /* SetEPDblBuf1Count */
-
-#define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) {\
- PCD_SET_EP_DBUF0_CNT((USBx), (bEpNum), (bDir), (wCount)); \
- PCD_SET_EP_DBUF1_CNT((USBx), (bEpNum), (bDir), (wCount)); \
- } /* PCD_SET_EP_DBUF_CNT */
-
-/**
- * @brief Gets buffer 0/1 rx/tx counter for double buffering.
- * @param USBx: USB peripheral instance register address.
- * @param bEpNum: Endpoint Number.
- * @retval None
- */
-#define PCD_GET_EP_DBUF0_CNT(USBx, bEpNum) (PCD_GET_EP_TX_CNT((USBx), (bEpNum)))
-#define PCD_GET_EP_DBUF1_CNT(USBx, bEpNum) (PCD_GET_EP_RX_CNT((USBx), (bEpNum)))
-
-#endif /* USB */
-
-/** @defgroup PCD_Instance_definition PCD Instance definition
- * @{
- */
-#define IS_PCD_ALL_INSTANCE IS_USB_ALL_INSTANCE
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* STM32F102x6 || STM32F102xB || */
- /* STM32F103x6 || STM32F103xB || */
- /* STM32F103xE || STM32F103xG || */
- /* STM32F105xC || STM32F107xC */
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* __STM32F1xx_HAL_PCD_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h
deleted file mode 100644
index 7e20d30..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_pcd_ex.h
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief Header file of Extended PCD HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F1xx_HAL_PCD_EX_H
-#define __STM32F1xx_HAL_PCD_EX_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#if defined(STM32F102x6) || defined(STM32F102xB) || \
- defined(STM32F103x6) || defined(STM32F103xB) || \
- defined(STM32F103xE) || defined(STM32F103xG) || \
- defined(STM32F105xC) || defined(STM32F107xC)
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal_def.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup PCDEx
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Exported macros -----------------------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions
- * @{
- */
-/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
- * @{
- */
-#if defined (USB_OTG_FS)
-HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size);
-HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size);
-#endif /* USB_OTG_FS */
-
-#if defined (USB)
-HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd,
- uint16_t ep_addr,
- uint16_t ep_kind,
- uint32_t pmaadress);
-#endif /* USB */
-/**
- * @}
- */
-
-/** @addtogroup PCDEx_Exported_Functions_Group2 Peripheral State functions
- * @{
- */
-void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state);
-/**
- * @}
- */
-/**
- * @}
- */
-/**
- * @}
- */
-
-/**
- * @}
- */
-#endif /* STM32F102x6 || STM32F102xB || */
- /* STM32F103x6 || STM32F103xB || */
- /* STM32F103xE || STM32F103xG || */
- /* STM32F105xC || STM32F107xC */
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* __STM32F1xx_HAL_PCD_EX_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h
deleted file mode 100644
index 0c52f59..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h
+++ /dev/null
@@ -1,406 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_pwr.h
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief Header file of PWR HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F1xx_HAL_PWR_H
-#define __STM32F1xx_HAL_PWR_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal_def.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup PWR
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-
-/** @defgroup PWR_Exported_Types PWR Exported Types
- * @{
- */
-
-/**
- * @brief PWR PVD configuration structure definition
- */
-typedef struct
-{
- uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level.
- This parameter can be a value of @ref PWR_PVD_detection_level */
-
- uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
- This parameter can be a value of @ref PWR_PVD_Mode */
-}PWR_PVDTypeDef;
-
-
-/**
- * @}
- */
-
-
-/* Internal constants --------------------------------------------------------*/
-
-/** @addtogroup PWR_Private_Constants
- * @{
- */
-
-#define PWR_EXTI_LINE_PVD ((uint32_t)0x00010000) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
-
-/**
- * @}
- */
-
-
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup PWR_Exported_Constants PWR Exported Constants
- * @{
- */
-
-/** @defgroup PWR_PVD_detection_level PWR PVD detection level
- * @{
- */
-#define PWR_PVDLEVEL_0 PWR_CR_PLS_2V2
-#define PWR_PVDLEVEL_1 PWR_CR_PLS_2V3
-#define PWR_PVDLEVEL_2 PWR_CR_PLS_2V4
-#define PWR_PVDLEVEL_3 PWR_CR_PLS_2V5
-#define PWR_PVDLEVEL_4 PWR_CR_PLS_2V6
-#define PWR_PVDLEVEL_5 PWR_CR_PLS_2V7
-#define PWR_PVDLEVEL_6 PWR_CR_PLS_2V8
-#define PWR_PVDLEVEL_7 PWR_CR_PLS_2V9
-
-/**
- * @}
- */
-
-/** @defgroup PWR_PVD_Mode PWR PVD Mode
- * @{
- */
-#define PWR_PVD_MODE_NORMAL ((uint32_t)0x00000000) /*!< basic mode is used */
-#define PWR_PVD_MODE_IT_RISING ((uint32_t)0x00010001) /*!< External Interrupt Mode with Rising edge trigger detection */
-#define PWR_PVD_MODE_IT_FALLING ((uint32_t)0x00010002) /*!< External Interrupt Mode with Falling edge trigger detection */
-#define PWR_PVD_MODE_IT_RISING_FALLING ((uint32_t)0x00010003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
-#define PWR_PVD_MODE_EVENT_RISING ((uint32_t)0x00020001) /*!< Event Mode with Rising edge trigger detection */
-#define PWR_PVD_MODE_EVENT_FALLING ((uint32_t)0x00020002) /*!< Event Mode with Falling edge trigger detection */
-#define PWR_PVD_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003) /*!< Event Mode with Rising/Falling edge trigger detection */
-
-/**
- * @}
- */
-
-
-/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins
- * @{
- */
-
-#define PWR_WAKEUP_PIN1 PWR_CSR_EWUP
-
-/**
- * @}
- */
-
-/** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode PWR Regulator state in SLEEP/STOP mode
- * @{
- */
-#define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000)
-#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS
-
-/**
- * @}
- */
-
-/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
- * @{
- */
-#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01)
-#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02)
-
-/**
- * @}
- */
-
-/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
- * @{
- */
-#define PWR_STOPENTRY_WFI ((uint8_t)0x01)
-#define PWR_STOPENTRY_WFE ((uint8_t)0x02)
-
-/**
- * @}
- */
-
-/** @defgroup PWR_Flag PWR Flag
- * @{
- */
-#define PWR_FLAG_WU PWR_CSR_WUF
-#define PWR_FLAG_SB PWR_CSR_SBF
-#define PWR_FLAG_PVDO PWR_CSR_PVDO
-
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup PWR_Exported_Macros PWR Exported Macros
- * @{
- */
-
-/** @brief Check PWR flag is set or not.
- * @param __FLAG__: specifies the flag to check.
- * This parameter can be one of the following values:
- * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
- * was received from the WKUP pin or from the RTC alarm
- * An additional wakeup event is detected if the WKUP pin is enabled
- * (by setting the EWUP bit) when the WKUP pin level is already high.
- * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
- * resumed from StandBy mode.
- * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
- * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
- * For this reason, this bit is equal to 0 after Standby or reset
- * until the PVDE bit is set.
- * @retval The new state of __FLAG__ (TRUE or FALSE).
- */
-#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
-
-/** @brief Clear the PWR's pending flags.
- * @param __FLAG__: specifies the flag to clear.
- * This parameter can be one of the following values:
- * @arg PWR_FLAG_WU: Wake Up flag
- * @arg PWR_FLAG_SB: StandBy flag
- */
-#define __HAL_PWR_CLEAR_FLAG(__FLAG__) SET_BIT(PWR->CR, ((__FLAG__) << 2))
-
-/**
- * @brief Enable interrupt on PVD Exti Line 16.
- * @retval None.
- */
-#define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD)
-
-/**
- * @brief Disable interrupt on PVD Exti Line 16.
- * @retval None.
- */
-#define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD)
-
-/**
- * @brief Enable event on PVD Exti Line 16.
- * @retval None.
- */
-#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD)
-
-/**
- * @brief Disable event on PVD Exti Line 16.
- * @retval None.
- */
-#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD)
-
-
-/**
- * @brief PVD EXTI line configuration: set falling edge trigger.
- * @retval None.
- */
-#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
-
-
-/**
- * @brief Disable the PVD Extended Interrupt Falling Trigger.
- * @retval None.
- */
-#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
-
-
-/**
- * @brief PVD EXTI line configuration: set rising edge trigger.
- * @retval None.
- */
-#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
-
-/**
- * @brief Disable the PVD Extended Interrupt Rising Trigger.
- * This parameter can be:
- * @retval None.
- */
-#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
-
-/**
- * @brief PVD EXTI line configuration: set rising & falling edge trigger.
- * @retval None.
- */
-#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
-
-/**
- * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
- * This parameter can be:
- * @retval None.
- */
-#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
-
-
-
-/**
- * @brief Check whether the specified PVD EXTI interrupt flag is set or not.
- * @retval EXTI PVD Line Status.
- */
-#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD))
-
-/**
- * @brief Clear the PVD EXTI flag.
- * @retval None.
- */
-#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD))
-
-/**
- * @brief Generate a Software interrupt on selected EXTI line.
- * @retval None.
- */
-#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, PWR_EXTI_LINE_PVD)
-/**
- * @}
- */
-
-/* Private macro -------------------------------------------------------------*/
-/** @defgroup PWR_Private_Macros PWR Private Macros
- * @{
- */
-#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
- ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
- ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
- ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
-
-
-#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
- ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
- ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
- ((MODE) == PWR_PVD_MODE_NORMAL))
-
-#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1))
-
-#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
- ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
-
-#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
-
-#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
-
-/**
- * @}
- */
-
-
-
-/* Exported functions --------------------------------------------------------*/
-
-/** @addtogroup PWR_Exported_Functions PWR Exported Functions
- * @{
- */
-
-/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
- * @{
- */
-
-/* Initialization and de-initialization functions *******************************/
-void HAL_PWR_DeInit(void);
-void HAL_PWR_EnableBkUpAccess(void);
-void HAL_PWR_DisableBkUpAccess(void);
-
-/**
- * @}
- */
-
-/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
- * @{
- */
-
-/* Peripheral Control functions ************************************************/
-void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
-/* #define HAL_PWR_ConfigPVD 12*/
-void HAL_PWR_EnablePVD(void);
-void HAL_PWR_DisablePVD(void);
-
-/* WakeUp pins configuration functions ****************************************/
-void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
-void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
-
-/* Low Power modes configuration functions ************************************/
-void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
-void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
-void HAL_PWR_EnterSTANDBYMode(void);
-
-void HAL_PWR_EnableSleepOnExit(void);
-void HAL_PWR_DisableSleepOnExit(void);
-void HAL_PWR_EnableSEVOnPend(void);
-void HAL_PWR_DisableSEVOnPend(void);
-
-
-
-void HAL_PWR_PVD_IRQHandler(void);
-void HAL_PWR_PVDCallback(void);
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* __STM32F1xx_HAL_PWR_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h
deleted file mode 100644
index 0ef33fe..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h
+++ /dev/null
@@ -1,1395 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_rcc.h
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief Header file of RCC HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F1xx_HAL_RCC_H
-#define __STM32F1xx_HAL_RCC_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal_def.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup RCC
- * @{
- */
-
-/** @addtogroup RCC_Private_Constants
- * @{
- */
-
-/** @defgroup RCC_Timeout RCC Timeout
- * @{
- */
-
-/* Disable Backup domain write protection state change timeout */
-#define RCC_DBP_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
-/* LSE state change timeout */
-#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT
-#define CLOCKSWITCH_TIMEOUT_VALUE ((uint32_t)5000) /* 5 s */
-#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT
-#define HSI_TIMEOUT_VALUE ((uint32_t)2) /* 2 ms (minimum Tick + 1) */
-#define LSI_TIMEOUT_VALUE ((uint32_t)2) /* 2 ms (minimum Tick + 1) */
-#define PLL_TIMEOUT_VALUE ((uint32_t)2) /* 2 ms (minimum Tick + 1) */
-#define LSI_VALUE ((uint32_t)40000) /* 40kHz */
-/**
- * @}
- */
-
-/** @defgroup RCC_Register_Offset Register offsets
- * @{
- */
-#define RCC_OFFSET (RCC_BASE - PERIPH_BASE)
-#define RCC_CR_OFFSET 0x00
-#define RCC_CFGR_OFFSET 0x04
-#define RCC_CIR_OFFSET 0x08
-#define RCC_BDCR_OFFSET 0x20
-#define RCC_CSR_OFFSET 0x24
-
-/**
- * @}
- */
-
-/** @defgroup RCC_BitAddress_AliasRegion BitAddress AliasRegion
- * @brief RCC registers bit address in the alias region
- * @{
- */
-#define RCC_CR_OFFSET_BB (RCC_OFFSET + RCC_CR_OFFSET)
-#define RCC_CFGR_OFFSET_BB (RCC_OFFSET + RCC_CFGR_OFFSET)
-#define RCC_CIR_OFFSET_BB (RCC_OFFSET + RCC_CIR_OFFSET)
-#define RCC_BDCR_OFFSET_BB (RCC_OFFSET + RCC_BDCR_OFFSET)
-#define RCC_CSR_OFFSET_BB (RCC_OFFSET + RCC_CSR_OFFSET)
-
-/* --- CR Register ---*/
-/* Alias word address of HSION bit */
-#define RCC_HSION_BIT_NUMBER POSITION_VAL(RCC_CR_HSION)
-#define RCC_CR_HSION_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32) + (RCC_HSION_BIT_NUMBER * 4)))
-/* Alias word address of HSEON bit */
-#define RCC_HSEON_BIT_NUMBER POSITION_VAL(RCC_CR_HSEON)
-#define RCC_CR_HSEON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32) + (RCC_HSEON_BIT_NUMBER * 4)))
-/* Alias word address of CSSON bit */
-#define RCC_CSSON_BIT_NUMBER POSITION_VAL(RCC_CR_CSSON)
-#define RCC_CR_CSSON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32) + (RCC_CSSON_BIT_NUMBER * 4)))
-/* Alias word address of PLLON bit */
-#define RCC_PLLON_BIT_NUMBER POSITION_VAL(RCC_CR_PLLON)
-#define RCC_CR_PLLON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32) + (RCC_PLLON_BIT_NUMBER * 4)))
-
-/* --- CSR Register ---*/
-/* Alias word address of LSION bit */
-#define RCC_LSION_BIT_NUMBER POSITION_VAL(RCC_CSR_LSION)
-#define RCC_CSR_LSION_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CSR_OFFSET_BB * 32) + (RCC_LSION_BIT_NUMBER * 4)))
-
-/* Alias word address of RMVF bit */
-#define RCC_RMVF_BIT_NUMBER POSITION_VAL(RCC_CSR_RMVF)
-#define RCC_CSR_RMVF_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CSR_OFFSET_BB * 32) + (RCC_RMVF_BIT_NUMBER * 4)))
-
-/* --- BDCR Registers ---*/
-/* Alias word address of LSEON bit */
-#define RCC_LSEON_BIT_NUMBER POSITION_VAL(RCC_BDCR_LSEON)
-#define RCC_BDCR_LSEON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_BDCR_OFFSET_BB * 32) + (RCC_LSEON_BIT_NUMBER * 4)))
-
-/* Alias word address of LSEON bit */
-#define RCC_LSEBYP_BIT_NUMBER POSITION_VAL(RCC_BDCR_LSEBYP)
-#define RCC_BDCR_LSEBYP_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_BDCR_OFFSET_BB * 32) + (RCC_LSEBYP_BIT_NUMBER * 4)))
-
-/* Alias word address of RTCEN bit */
-#define RCC_RTCEN_BIT_NUMBER POSITION_VAL(RCC_BDCR_RTCEN)
-#define RCC_BDCR_RTCEN_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_BDCR_OFFSET_BB * 32) + (RCC_RTCEN_BIT_NUMBER * 4)))
-
-/* Alias word address of BDRST bit */
-#define RCC_BDRST_BIT_NUMBER POSITION_VAL(RCC_BDCR_BDRST)
-#define RCC_BDCR_BDRST_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_BDCR_OFFSET_BB * 32) + (RCC_BDRST_BIT_NUMBER * 4)))
-
-/**
- * @}
- */
-
-/* CR register byte 2 (Bits[23:16]) base address */
-#define RCC_CR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + RCC_CR_OFFSET + 0x02))
-
-/* CIR register byte 1 (Bits[15:8]) base address */
-#define RCC_CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + RCC_CIR_OFFSET + 0x01))
-
-/* CIR register byte 2 (Bits[23:16]) base address */
-#define RCC_CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + RCC_CIR_OFFSET + 0x02))
-
-/* Defines used for Flags */
-#define CR_REG_INDEX ((uint8_t)1)
-#define BDCR_REG_INDEX ((uint8_t)2)
-#define CSR_REG_INDEX ((uint8_t)3)
-
-#define RCC_FLAG_MASK ((uint8_t)0x1F)
-
-/**
- * @}
- */
-
-/** @addtogroup RCC_Private_Macros
- * @{
- */
-/** @defgroup RCC_Alias_For_Legacy Alias define maintained for legacy
- * @{
- */
-#define __HAL_RCC_SYSCFG_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE
-#define __HAL_RCC_SYSCFG_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE
-#define __HAL_RCC_SYSCFG_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET
-#define __HAL_RCC_SYSCFG_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET
-/**
- * @}
- */
-
-#define IS_RCC_PLLSOURCE(__SOURCE__) (((__SOURCE__) == RCC_PLLSOURCE_HSI_DIV2) || \
- ((__SOURCE__) == RCC_PLLSOURCE_HSE))
-#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) (((__OSCILLATOR__) == RCC_OSCILLATORTYPE_NONE) || \
- (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \
- (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \
- (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \
- (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE))
-#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON) || \
- ((__HSE__) == RCC_HSE_BYPASS))
-#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || \
- ((__LSE__) == RCC_LSE_BYPASS))
-#define IS_RCC_HSI(__HSI__) (((__HSI__) == RCC_HSI_OFF) || ((__HSI__) == RCC_HSI_ON))
-#define IS_RCC_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= 0x1F)
-#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON))
-#define IS_RCC_PLL(__PLL__) (((__PLL__) == RCC_PLL_NONE) || ((__PLL__) == RCC_PLL_OFF) || \
- ((__PLL__) == RCC_PLL_ON))
-
-#define IS_RCC_CLOCKTYPE(CLK) ((((CLK) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) || \
- (((CLK) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) || \
- (((CLK) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) || \
- (((CLK) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2))
-#define IS_RCC_SYSCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_HSI) || \
- ((__SOURCE__) == RCC_SYSCLKSOURCE_HSE) || \
- ((__SOURCE__) == RCC_SYSCLKSOURCE_PLLCLK))
-#define IS_RCC_SYSCLKSOURCE_STATUS(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_STATUS_HSI) || \
- ((__SOURCE__) == RCC_SYSCLKSOURCE_STATUS_HSE) || \
- ((__SOURCE__) == RCC_SYSCLKSOURCE_STATUS_PLLCLK))
-#define IS_RCC_HCLK(__HCLK__) (((__HCLK__) == RCC_SYSCLK_DIV1) || ((__HCLK__) == RCC_SYSCLK_DIV2) || \
- ((__HCLK__) == RCC_SYSCLK_DIV4) || ((__HCLK__) == RCC_SYSCLK_DIV8) || \
- ((__HCLK__) == RCC_SYSCLK_DIV16) || ((__HCLK__) == RCC_SYSCLK_DIV64) || \
- ((__HCLK__) == RCC_SYSCLK_DIV128) || ((__HCLK__) == RCC_SYSCLK_DIV256) || \
- ((__HCLK__) == RCC_SYSCLK_DIV512))
-#define IS_RCC_PCLK(__PCLK__) (((__PCLK__) == RCC_HCLK_DIV1) || ((__PCLK__) == RCC_HCLK_DIV2) || \
- ((__PCLK__) == RCC_HCLK_DIV4) || ((__PCLK__) == RCC_HCLK_DIV8) || \
- ((__PCLK__) == RCC_HCLK_DIV16))
-#define IS_RCC_MCO(__MCO__) ((__MCO__) == RCC_MCO)
-#define IS_RCC_MCODIV(__DIV__) (((__DIV__) == RCC_MCODIV_1))
-#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_NO_CLK) || \
- ((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \
- ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \
- ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV128))
-
-/**
- * @}
- */
-
-/* Exported types ------------------------------------------------------------*/
-
-/** @defgroup RCC_Exported_Types RCC Exported Types
- * @{
- */
-
-/**
- * @brief RCC PLL configuration structure definition
- */
-typedef struct
-{
- uint32_t PLLState; /*!< PLLState: The new state of the PLL.
- This parameter can be a value of @ref RCC_PLL_Config */
-
- uint32_t PLLSource; /*!< PLLSource: PLL entry clock source.
- This parameter must be a value of @ref RCC_PLL_Clock_Source */
-
- uint32_t PLLMUL; /*!< PLLMUL: Multiplication factor for PLL VCO input clock
- This parameter must be a value of @ref RCCEx_PLL_Multiplication_Factor */
-} RCC_PLLInitTypeDef;
-
-/**
- * @brief RCC System, AHB and APB busses clock configuration structure definition
- */
-typedef struct
-{
- uint32_t ClockType; /*!< The clock to be configured.
- This parameter can be a value of @ref RCC_System_Clock_Type */
-
- uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock.
- This parameter can be a value of @ref RCC_System_Clock_Source */
-
- uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
- This parameter can be a value of @ref RCC_AHB_Clock_Source */
-
- uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
- This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
-
- uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK).
- This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
-} RCC_ClkInitTypeDef;
-
-/**
- * @}
- */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup RCC_Exported_Constants RCC Exported Constants
- * @{
- */
-
-/** @defgroup RCC_PLL_Clock_Source PLL Clock Source
- * @{
- */
-
-#define RCC_PLLSOURCE_HSI_DIV2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */
-#define RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC /*!< HSE clock selected as PLL entry clock source */
-
-/**
- * @}
- */
-
-/** @defgroup RCC_Oscillator_Type Oscillator Type
- * @{
- */
-#define RCC_OSCILLATORTYPE_NONE ((uint32_t)0x00000000)
-#define RCC_OSCILLATORTYPE_HSE ((uint32_t)0x00000001)
-#define RCC_OSCILLATORTYPE_HSI ((uint32_t)0x00000002)
-#define RCC_OSCILLATORTYPE_LSE ((uint32_t)0x00000004)
-#define RCC_OSCILLATORTYPE_LSI ((uint32_t)0x00000008)
-/**
- * @}
- */
-
-/** @defgroup RCC_HSE_Config HSE Config
- * @{
- */
-#define RCC_HSE_OFF ((uint32_t)0x00000000) /*!< HSE clock deactivation */
-#define RCC_HSE_ON RCC_CR_HSEON /*!< HSE clock activation */
-#define RCC_HSE_BYPASS ((uint32_t)(RCC_CR_HSEBYP | RCC_CR_HSEON)) /*!< External clock source for HSE clock */
-/**
- * @}
- */
-
-/** @defgroup RCC_LSE_Config LSE Config
- * @{
- */
-#define RCC_LSE_OFF ((uint32_t)0x00000000) /*!< LSE clock deactivation */
-#define RCC_LSE_ON RCC_BDCR_LSEON /*!< LSE clock activation */
-#define RCC_LSE_BYPASS ((uint32_t)(RCC_BDCR_LSEBYP | RCC_BDCR_LSEON)) /*!< External clock source for LSE clock */
-
-/**
- * @}
- */
-
-/** @defgroup RCC_HSI_Config HSI Config
- * @{
- */
-#define RCC_HSI_OFF ((uint32_t)0x00000000) /*!< HSI clock deactivation */
-#define RCC_HSI_ON RCC_CR_HSION /*!< HSI clock activation */
-
-#define RCC_HSICALIBRATION_DEFAULT ((uint32_t)0x10) /* Default HSI calibration trimming value */
-
-/**
- * @}
- */
-
-/** @defgroup RCC_LSI_Config LSI Config
- * @{
- */
-#define RCC_LSI_OFF ((uint32_t)0x00000000) /*!< LSI clock deactivation */
-#define RCC_LSI_ON RCC_CSR_LSION /*!< LSI clock activation */
-
-/**
- * @}
- */
-
-/** @defgroup RCC_PLL_Config PLL Config
- * @{
- */
-#define RCC_PLL_NONE ((uint32_t)0x00000000) /*!< PLL is not configured */
-#define RCC_PLL_OFF ((uint32_t)0x00000001) /*!< PLL deactivation */
-#define RCC_PLL_ON ((uint32_t)0x00000002) /*!< PLL activation */
-
-/**
- * @}
- */
-
-/** @defgroup RCC_System_Clock_Type System Clock Type
- * @{
- */
-#define RCC_CLOCKTYPE_SYSCLK ((uint32_t)0x00000001) /*!< SYSCLK to configure */
-#define RCC_CLOCKTYPE_HCLK ((uint32_t)0x00000002) /*!< HCLK to configure */
-#define RCC_CLOCKTYPE_PCLK1 ((uint32_t)0x00000004) /*!< PCLK1 to configure */
-#define RCC_CLOCKTYPE_PCLK2 ((uint32_t)0x00000008) /*!< PCLK2 to configure */
-
-/**
- * @}
- */
-
-/** @defgroup RCC_System_Clock_Source System Clock Source
- * @{
- */
-#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selected as system clock */
-#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selected as system clock */
-#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL /*!< PLL selected as system clock */
-
-/**
- * @}
- */
-
-/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status
- * @{
- */
-#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */
-#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */
-#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */
-
-/**
- * @}
- */
-
-/** @defgroup RCC_AHB_Clock_Source AHB Clock Source
- * @{
- */
-#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */
-#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */
-#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */
-#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */
-#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */
-#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */
-#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */
-#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */
-#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */
-
-/**
- * @}
- */
-
-/** @defgroup RCC_APB1_APB2_Clock_Source APB1 APB2 Clock Source
- * @{
- */
-#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1 /*!< HCLK not divided */
-#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2 /*!< HCLK divided by 2 */
-#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4 /*!< HCLK divided by 4 */
-#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8 /*!< HCLK divided by 8 */
-#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16 /*!< HCLK divided by 16 */
-
-/**
- * @}
- */
-
-/** @defgroup RCC_RTC_Clock_Source RTC Clock Source
- * @{
- */
-#define RCC_RTCCLKSOURCE_NO_CLK ((uint32_t)0x00000000) /*!< No clock */
-#define RCC_RTCCLKSOURCE_LSE RCC_BDCR_RTCSEL_LSE /*!< LSE oscillator clock used as RTC clock */
-#define RCC_RTCCLKSOURCE_LSI RCC_BDCR_RTCSEL_LSI /*!< LSI oscillator clock used as RTC clock */
-#define RCC_RTCCLKSOURCE_HSE_DIV128 RCC_BDCR_RTCSEL_HSE /*!< HSE oscillator clock divided by 128 used as RTC clock */
-/**
- * @}
- */
-
-
-/** @defgroup RCC_MCO_Index MCO Index
- * @{
- */
-#define RCC_MCO1 ((uint32_t)0x00000000)
-#define RCC_MCO RCC_MCO1 /*!< MCO1 to be compliant with other families with 2 MCOs*/
-
-/**
- * @}
- */
-
-/** @defgroup RCC_MCOx_Clock_Prescaler MCO Clock Prescaler
- * @{
- */
-#define RCC_MCODIV_1 ((uint32_t)0x00000000)
-
-/**
- * @}
- */
-
-/** @defgroup RCC_Interrupt Interrupts
- * @{
- */
-#define RCC_IT_LSIRDY ((uint8_t)RCC_CIR_LSIRDYF) /*!< LSI Ready Interrupt flag */
-#define RCC_IT_LSERDY ((uint8_t)RCC_CIR_LSERDYF) /*!< LSE Ready Interrupt flag */
-#define RCC_IT_HSIRDY ((uint8_t)RCC_CIR_HSIRDYF) /*!< HSI Ready Interrupt flag */
-#define RCC_IT_HSERDY ((uint8_t)RCC_CIR_HSERDYF) /*!< HSE Ready Interrupt flag */
-#define RCC_IT_PLLRDY ((uint8_t)RCC_CIR_PLLRDYF) /*!< PLL Ready Interrupt flag */
-#define RCC_IT_CSS ((uint8_t)RCC_CIR_CSSF) /*!< Clock Security System Interrupt flag */
-/**
- * @}
- */
-
-/** @defgroup RCC_Flag Flags
- * Elements values convention: XXXYYYYYb
- * - YYYYY : Flag position in the register
- * - XXX : Register index
- * - 001: CR register
- * - 010: BDCR register
- * - 011: CSR register
- * @{
- */
-/* Flags in the CR register */
-#define RCC_FLAG_HSIRDY ((uint8_t)((CR_REG_INDEX << 5) | POSITION_VAL(RCC_CR_HSIRDY))) /*!< Internal High Speed clock ready flag */
-#define RCC_FLAG_HSERDY ((uint8_t)((CR_REG_INDEX << 5) | POSITION_VAL(RCC_CR_HSERDY))) /*!< External High Speed clock ready flag */
-#define RCC_FLAG_PLLRDY ((uint8_t)((CR_REG_INDEX << 5) | POSITION_VAL(RCC_CR_PLLRDY))) /*!< PLL clock ready flag */
-
-/* Flags in the CSR register */
-#define RCC_FLAG_LSIRDY ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_LSIRDY))) /*!< Internal Low Speed oscillator Ready */
-#define RCC_FLAG_PINRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_PINRSTF))) /*!< PIN reset flag */
-#define RCC_FLAG_PORRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_PORRSTF))) /*!< POR/PDR reset flag */
-#define RCC_FLAG_SFTRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_SFTRSTF))) /*!< Software Reset flag */
-#define RCC_FLAG_IWDGRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_IWDGRSTF))) /*!< Independent Watchdog reset flag */
-#define RCC_FLAG_WWDGRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_WWDGRSTF))) /*!< Window watchdog reset flag */
-#define RCC_FLAG_LPWRRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_LPWRRSTF))) /*!< Low-Power reset flag */
-
-/* Flags in the BDCR register */
-#define RCC_FLAG_LSERDY ((uint8_t)((BDCR_REG_INDEX << 5) | POSITION_VAL(RCC_BDCR_LSERDY))) /*!< External Low Speed oscillator Ready */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macro ------------------------------------------------------------*/
-
-/** @defgroup RCC_Exported_Macros RCC Exported Macros
- * @{
- */
-
-/** @defgroup RCC_Peripheral_Clock_Enable_Disable Peripheral Clock Enable Disable
- * @brief Enable or disable the AHB1 peripheral clock.
- * @note After reset, the peripheral clock (used for registers read/write access)
- * is disabled and the application software has to enable this clock before
- * using it.
- * @{
- */
-#define __HAL_RCC_DMA1_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN);\
- /* Delay after an RCC peripheral clock enabling */\
- tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_SRAM_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->AHBENR, RCC_AHBENR_SRAMEN);\
- /* Delay after an RCC peripheral clock enabling */\
- tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_SRAMEN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_FLITF_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->AHBENR, RCC_AHBENR_FLITFEN);\
- /* Delay after an RCC peripheral clock enabling */\
- tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FLITFEN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_CRC_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN);\
- /* Delay after an RCC peripheral clock enabling */\
- tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA1EN))
-#define __HAL_RCC_SRAM_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_SRAMEN))
-#define __HAL_RCC_FLITF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FLITFEN))
-#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_CRCEN))
-
-/**
- * @}
- */
-
-/** @defgroup RCC_AHB_Peripheral_Clock_Enable_Disable_Status AHB Peripheral Clock Enable Disable Status
- * @brief Get the enable or disable status of the AHB peripheral clock.
- * @note After reset, the peripheral clock (used for registers read/write access)
- * is disabled and the application software has to enable this clock before
- * using it.
- * @{
- */
-
-#define __HAL_RCC_DMA1_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA1EN)) != RESET)
-#define __HAL_RCC_DMA1_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA1EN)) == RESET)
-#define __HAL_RCC_SRAM_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_SRAMEN)) != RESET)
-#define __HAL_RCC_SRAM_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_SRAMEN)) == RESET)
-#define __HAL_RCC_FLITF_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_FLITFEN)) != RESET)
-#define __HAL_RCC_FLITF_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_FLITFEN)) == RESET)
-#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_CRCEN)) != RESET)
-#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_CRCEN)) == RESET)
-
-/**
- * @}
- */
-
-/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Clock Enable Disable
- * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
- * @note After reset, the peripheral clock (used for registers read/write access)
- * is disabled and the application software has to enable this clock before
- * using it.
- * @{
- */
-#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
- /* Delay after an RCC peripheral clock enabling */\
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
- /* Delay after an RCC peripheral clock enabling */\
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_WWDG_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
- /* Delay after an RCC peripheral clock enabling */\
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_USART2_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
- /* Delay after an RCC peripheral clock enabling */\
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_I2C1_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
- /* Delay after an RCC peripheral clock enabling */\
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_BKP_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_BKPEN);\
- /* Delay after an RCC peripheral clock enabling */\
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_BKPEN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_PWR_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
- /* Delay after an RCC peripheral clock enabling */\
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
-#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
-#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
-#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN))
-#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN))
-
-#define __HAL_RCC_BKP_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_BKPEN))
-#define __HAL_RCC_PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN))
-
-/**
- * @}
- */
-
-/** @defgroup RCC_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
- * @brief Get the enable or disable status of the APB1 peripheral clock.
- * @note After reset, the peripheral clock (used for registers read/write access)
- * is disabled and the application software has to enable this clock before
- * using it.
- * @{
- */
-
-#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
-#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
-#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
-#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
-#define __HAL_RCC_WWDG_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) != RESET)
-#define __HAL_RCC_WWDG_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) == RESET)
-#define __HAL_RCC_USART2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) != RESET)
-#define __HAL_RCC_USART2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) == RESET)
-#define __HAL_RCC_I2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) != RESET)
-#define __HAL_RCC_I2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) == RESET)
-#define __HAL_RCC_BKP_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_BKPEN)) != RESET)
-#define __HAL_RCC_BKP_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_BKPEN)) == RESET)
-#define __HAL_RCC_PWR_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) != RESET)
-#define __HAL_RCC_PWR_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) == RESET)
-
-/**
- * @}
- */
-
-/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Clock Enable Disable
- * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
- * @note After reset, the peripheral clock (used for registers read/write access)
- * is disabled and the application software has to enable this clock before
- * using it.
- * @{
- */
-#define __HAL_RCC_AFIO_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB2ENR, RCC_APB2ENR_AFIOEN);\
- /* Delay after an RCC peripheral clock enabling */\
- tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_AFIOEN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPAEN);\
- /* Delay after an RCC peripheral clock enabling */\
- tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPAEN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPBEN);\
- /* Delay after an RCC peripheral clock enabling */\
- tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPBEN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPCEN);\
- /* Delay after an RCC peripheral clock enabling */\
- tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPCEN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN);\
- /* Delay after an RCC peripheral clock enabling */\
- tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_ADC1_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
- /* Delay after an RCC peripheral clock enabling */\
- tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_TIM1_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
- /* Delay after an RCC peripheral clock enabling */\
- tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_SPI1_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
- /* Delay after an RCC peripheral clock enabling */\
- tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_USART1_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
- /* Delay after an RCC peripheral clock enabling */\
- tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_AFIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_AFIOEN))
-#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPAEN))
-#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPBEN))
-#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPCEN))
-#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPDEN))
-#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN))
-
-#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN))
-#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
-#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
-
-/**
- * @}
- */
-
-/** @defgroup RCC_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
- * @brief Get the enable or disable status of the APB2 peripheral clock.
- * @note After reset, the peripheral clock (used for registers read/write access)
- * is disabled and the application software has to enable this clock before
- * using it.
- * @{
- */
-
-#define __HAL_RCC_AFIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_AFIOEN)) != RESET)
-#define __HAL_RCC_AFIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_AFIOEN)) == RESET)
-#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPAEN)) != RESET)
-#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPAEN)) == RESET)
-#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPBEN)) != RESET)
-#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPBEN)) == RESET)
-#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPCEN)) != RESET)
-#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPCEN)) == RESET)
-#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPDEN)) != RESET)
-#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPDEN)) == RESET)
-#define __HAL_RCC_ADC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) != RESET)
-#define __HAL_RCC_ADC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) == RESET)
-#define __HAL_RCC_TIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) != RESET)
-#define __HAL_RCC_TIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) == RESET)
-#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET)
-#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET)
-#define __HAL_RCC_USART1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) != RESET)
-#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) == RESET)
-
-/**
- * @}
- */
-
-/** @defgroup RCC_APB1_Force_Release_Reset APB1 Force Release Reset
- * @brief Force or release APB1 peripheral reset.
- * @{
- */
-#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU)
-#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
-#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
-#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST))
-#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST))
-#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST))
-
-#define __HAL_RCC_BKP_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_BKPRST))
-#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST))
-
-#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00)
-#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
-#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
-#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST))
-#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST))
-#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST))
-
-#define __HAL_RCC_BKP_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_BKPRST))
-#define __HAL_RCC_PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST))
-
-/**
- * @}
- */
-
-/** @defgroup RCC_APB2_Force_Release_Reset APB2 Force Release Reset
- * @brief Force or release APB2 peripheral reset.
- * @{
- */
-#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU)
-#define __HAL_RCC_AFIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_AFIORST))
-#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPARST))
-#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPBRST))
-#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPCRST))
-#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPDRST))
-#define __HAL_RCC_ADC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC1RST))
-
-#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST))
-#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
-#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST))
-
-#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00)
-#define __HAL_RCC_AFIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_AFIORST))
-#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPARST))
-#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPBRST))
-#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPCRST))
-#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPDRST))
-#define __HAL_RCC_ADC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC1RST))
-
-#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST))
-#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
-#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST))
-
-/**
- * @}
- */
-
-/** @defgroup RCC_HSI_Configuration HSI Configuration
- * @{
- */
-
-/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI).
- * @note The HSI is stopped by hardware when entering STOP and STANDBY modes.
- * @note HSI can not be stopped if it is used as system clock source. In this case,
- * you have to select another source of the system clock then stop the HSI.
- * @note After enabling the HSI, the application software should wait on HSIRDY
- * flag to be set indicating that HSI clock is stable and can be used as
- * system clock source.
- * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
- * clock cycles.
- */
-#define __HAL_RCC_HSI_ENABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = ENABLE)
-#define __HAL_RCC_HSI_DISABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = DISABLE)
-
-/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
- * @note The calibration is used to compensate for the variations in voltage
- * and temperature that influence the frequency of the internal HSI RC.
- * @param _HSICALIBRATIONVALUE_ specifies the calibration trimming value.
- * (default is RCC_HSICALIBRATION_DEFAULT).
- * This parameter must be a number between 0 and 0x1F.
- */
-#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(_HSICALIBRATIONVALUE_) \
- (MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, (uint32_t)(_HSICALIBRATIONVALUE_) << POSITION_VAL(RCC_CR_HSITRIM)))
-
-/**
- * @}
- */
-
-/** @defgroup RCC_LSI_Configuration LSI Configuration
- * @{
- */
-
-/** @brief Macro to enable the Internal Low Speed oscillator (LSI).
- * @note After enabling the LSI, the application software should wait on
- * LSIRDY flag to be set indicating that LSI clock is stable and can
- * be used to clock the IWDG and/or the RTC.
- */
-#define __HAL_RCC_LSI_ENABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = ENABLE)
-
-/** @brief Macro to disable the Internal Low Speed oscillator (LSI).
- * @note LSI can not be disabled if the IWDG is running.
- * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
- * clock cycles.
- */
-#define __HAL_RCC_LSI_DISABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = DISABLE)
-
-/**
- * @}
- */
-
-/** @defgroup RCC_HSE_Configuration HSE Configuration
- * @{
- */
-
-/**
- * @brief Macro to configure the External High Speed oscillator (HSE).
- * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not
- * supported by this macro. User should request a transition to HSE Off
- * first and then HSE On or HSE Bypass.
- * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application
- * software should wait on HSERDY flag to be set indicating that HSE clock
- * is stable and can be used to clock the PLL and/or system clock.
- * @note HSE state can not be changed if it is used directly or through the
- * PLL as system clock. In this case, you have to select another source
- * of the system clock then change the HSE state (ex. disable it).
- * @note The HSE is stopped by hardware when entering STOP and STANDBY modes.
- * @note This function reset the CSSON bit, so if the clock security system(CSS)
- * was previously enabled you have to enable it again after calling this
- * function.
- * @param __STATE__ specifies the new state of the HSE.
- * This parameter can be one of the following values:
- * @arg @ref RCC_HSE_OFF turn OFF the HSE oscillator, HSERDY flag goes low after
- * 6 HSE oscillator clock cycles.
- * @arg @ref RCC_HSE_ON turn ON the HSE oscillator
- * @arg @ref RCC_HSE_BYPASS HSE oscillator bypassed with external clock
- */
-#define __HAL_RCC_HSE_CONFIG(__STATE__) \
- do{ \
- if ((__STATE__) == RCC_HSE_ON) \
- { \
- SET_BIT(RCC->CR, RCC_CR_HSEON); \
- } \
- else if ((__STATE__) == RCC_HSE_OFF) \
- { \
- CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \
- CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \
- } \
- else if ((__STATE__) == RCC_HSE_BYPASS) \
- { \
- SET_BIT(RCC->CR, RCC_CR_HSEBYP); \
- SET_BIT(RCC->CR, RCC_CR_HSEON); \
- } \
- else \
- { \
- CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \
- CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \
- } \
- }while(0)
-
-/**
- * @}
- */
-
-/** @defgroup RCC_LSE_Configuration LSE Configuration
- * @{
- */
-
-/**
- * @brief Macro to configure the External Low Speed oscillator (LSE).
- * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro.
- * @note As the LSE is in the Backup domain and write access is denied to
- * this domain after reset, you have to enable write access using
- * @ref HAL_PWR_EnableBkUpAccess() function before to configure the LSE
- * (to be done once after reset).
- * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application
- * software should wait on LSERDY flag to be set indicating that LSE clock
- * is stable and can be used to clock the RTC.
- * @param __STATE__ specifies the new state of the LSE.
- * This parameter can be one of the following values:
- * @arg @ref RCC_LSE_OFF turn OFF the LSE oscillator, LSERDY flag goes low after
- * 6 LSE oscillator clock cycles.
- * @arg @ref RCC_LSE_ON turn ON the LSE oscillator.
- * @arg @ref RCC_LSE_BYPASS LSE oscillator bypassed with external clock.
- */
-#define __HAL_RCC_LSE_CONFIG(__STATE__) \
- do{ \
- if ((__STATE__) == RCC_LSE_ON) \
- { \
- SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
- } \
- else if ((__STATE__) == RCC_LSE_OFF) \
- { \
- CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
- CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
- } \
- else if ((__STATE__) == RCC_LSE_BYPASS) \
- { \
- SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
- SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
- } \
- else \
- { \
- CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \
- CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
- } \
- }while(0)
-
-/**
- * @}
- */
-
-/** @defgroup RCC_PLL_Configuration PLL Configuration
- * @{
- */
-
-/** @brief Macro to enable the main PLL.
- * @note After enabling the main PLL, the application software should wait on
- * PLLRDY flag to be set indicating that PLL clock is stable and can
- * be used as system clock source.
- * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes.
- */
-#define __HAL_RCC_PLL_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = ENABLE)
-
-/** @brief Macro to disable the main PLL.
- * @note The main PLL can not be disabled if it is used as system clock source
- */
-#define __HAL_RCC_PLL_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = DISABLE)
-
-/** @brief Macro to configure the main PLL clock source and multiplication factors.
- * @note This function must be used only when the main PLL is disabled.
- *
- * @param __RCC_PLLSOURCE__ specifies the PLL entry clock source.
- * This parameter can be one of the following values:
- * @arg @ref RCC_PLLSOURCE_HSI_DIV2 HSI oscillator clock selected as PLL clock entry
- * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry
- * @param __PLLMUL__ specifies the multiplication factor for PLL VCO output clock
- * This parameter can be one of the following values:
- * @arg @ref RCC_PLL_MUL4 PLLVCO = PLL clock entry x 4
- * @arg @ref RCC_PLL_MUL6 PLLVCO = PLL clock entry x 6
- @if STM32F105xC
- * @arg @ref RCC_PLL_MUL6_5 PLLVCO = PLL clock entry x 6.5
- @elseif STM32F107xC
- * @arg @ref RCC_PLL_MUL6_5 PLLVCO = PLL clock entry x 6.5
- @else
- * @arg @ref RCC_PLL_MUL2 PLLVCO = PLL clock entry x 2
- * @arg @ref RCC_PLL_MUL3 PLLVCO = PLL clock entry x 3
- * @arg @ref RCC_PLL_MUL10 PLLVCO = PLL clock entry x 10
- * @arg @ref RCC_PLL_MUL11 PLLVCO = PLL clock entry x 11
- * @arg @ref RCC_PLL_MUL12 PLLVCO = PLL clock entry x 12
- * @arg @ref RCC_PLL_MUL13 PLLVCO = PLL clock entry x 13
- * @arg @ref RCC_PLL_MUL14 PLLVCO = PLL clock entry x 14
- * @arg @ref RCC_PLL_MUL15 PLLVCO = PLL clock entry x 15
- * @arg @ref RCC_PLL_MUL16 PLLVCO = PLL clock entry x 16
- @endif
- * @arg @ref RCC_PLL_MUL8 PLLVCO = PLL clock entry x 8
- * @arg @ref RCC_PLL_MUL9 PLLVCO = PLL clock entry x 9
- *
- */
-#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSOURCE__, __PLLMUL__)\
- MODIFY_REG(RCC->CFGR, (RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL),((__RCC_PLLSOURCE__) | (__PLLMUL__) ))
-
-/** @brief Get oscillator clock selected as PLL input clock
- * @retval The clock source used for PLL entry. The returned value can be one
- * of the following:
- * @arg @ref RCC_PLLSOURCE_HSI_DIV2 HSI oscillator clock selected as PLL input clock
- * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL input clock
- */
-#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC)))
-
-/**
- * @}
- */
-
-/** @defgroup RCC_Get_Clock_source Get Clock source
- * @{
- */
-
-/**
- * @brief Macro to configure the system clock source.
- * @param __SYSCLKSOURCE__ specifies the system clock source.
- * This parameter can be one of the following values:
- * @arg @ref RCC_SYSCLKSOURCE_HSI HSI oscillator is used as system clock source.
- * @arg @ref RCC_SYSCLKSOURCE_HSE HSE oscillator is used as system clock source.
- * @arg @ref RCC_SYSCLKSOURCE_PLLCLK PLL output is used as system clock source.
- */
-#define __HAL_RCC_SYSCLK_CONFIG(__SYSCLKSOURCE__) \
- MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__SYSCLKSOURCE__))
-
-/** @brief Macro to get the clock source used as system clock.
- * @retval The clock source used as system clock. The returned value can be one
- * of the following:
- * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSI HSI used as system clock
- * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSE HSE used as system clock
- * @arg @ref RCC_SYSCLKSOURCE_STATUS_PLLCLK PLL used as system clock
- */
-#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR,RCC_CFGR_SWS)))
-
-/**
- * @}
- */
-
-/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config
- * @{
- */
-
-#if defined(RCC_CFGR_MCO_3)
-/** @brief Macro to configure the MCO clock.
- * @param __MCOCLKSOURCE__ specifies the MCO clock source.
- * This parameter can be one of the following values:
- * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock
- * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock (SYSCLK) selected as MCO clock
- * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock
- * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock
- * @arg @ref RCC_MCO1SOURCE_PLLCLK PLL clock divided by 2 selected as MCO clock
- * @arg @ref RCC_MCO1SOURCE_PLL2CLK PLL2 clock selected by 2 selected as MCO clock
- * @arg @ref RCC_MCO1SOURCE_PLL3CLK_DIV2 PLL3 clock divided by 2 selected as MCO clock
- * @arg @ref RCC_MCO1SOURCE_EXT_HSE XT1 external 3-25 MHz oscillator clock selected (for Ethernet) as MCO clock
- * @arg @ref RCC_MCO1SOURCE_PLL3CLK PLL3 clock selected (for Ethernet) as MCO clock
- * @param __MCODIV__ specifies the MCO clock prescaler.
- * This parameter can be one of the following values:
- * @arg @ref RCC_MCODIV_1 No division applied on MCO clock source
- */
-#else
-/** @brief Macro to configure the MCO clock.
- * @param __MCOCLKSOURCE__ specifies the MCO clock source.
- * This parameter can be one of the following values:
- * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock
- * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock (SYSCLK) selected as MCO clock
- * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock
- * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock
- * @arg @ref RCC_MCO1SOURCE_PLLCLK PLL clock divided by 2 selected as MCO clock
- * @param __MCODIV__ specifies the MCO clock prescaler.
- * This parameter can be one of the following values:
- * @arg @ref RCC_MCODIV_1 No division applied on MCO clock source
- */
-#endif
-
-#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \
- MODIFY_REG(RCC->CFGR, RCC_CFGR_MCO, (__MCOCLKSOURCE__))
-
-
-/**
- * @}
- */
-
- /** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration
- * @{
- */
-
-/** @brief Macro to configure the RTC clock (RTCCLK).
- * @note As the RTC clock configuration bits are in the Backup domain and write
- * access is denied to this domain after reset, you have to enable write
- * access using the Power Backup Access macro before to configure
- * the RTC clock source (to be done once after reset).
- * @note Once the RTC clock is configured it can't be changed unless the
- * Backup domain is reset using @ref __HAL_RCC_BACKUPRESET_FORCE() macro, or by
- * a Power On Reset (POR).
- *
- * @param __RTC_CLKSOURCE__ specifies the RTC clock source.
- * This parameter can be one of the following values:
- * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock
- * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock
- * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock
- * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV128 HSE divided by 128 selected as RTC clock
- * @note If the LSE or LSI is used as RTC clock source, the RTC continues to
- * work in STOP and STANDBY modes, and can be used as wakeup source.
- * However, when the HSE clock is used as RTC clock source, the RTC
- * cannot be used in STOP and STANDBY modes.
- * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as
- * RTC clock source).
- */
-#define __HAL_RCC_RTC_CONFIG(__RTC_CLKSOURCE__) MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, (__RTC_CLKSOURCE__))
-
-/** @brief Macro to get the RTC clock source.
- * @retval The clock source can be one of the following values:
- * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock
- * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock
- * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock
- * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV128 HSE divided by 128 selected as RTC clock
- */
-#define __HAL_RCC_GET_RTC_SOURCE() (READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL))
-
-/** @brief Macro to enable the the RTC clock.
- * @note These macros must be used only after the RTC clock source was selected.
- */
-#define __HAL_RCC_RTC_ENABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = ENABLE)
-
-/** @brief Macro to disable the the RTC clock.
- * @note These macros must be used only after the RTC clock source was selected.
- */
-#define __HAL_RCC_RTC_DISABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = DISABLE)
-
-/** @brief Macro to force the Backup domain reset.
- * @note This function resets the RTC peripheral (including the backup registers)
- * and the RTC clock source selection in RCC_BDCR register.
- */
-#define __HAL_RCC_BACKUPRESET_FORCE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = ENABLE)
-
-/** @brief Macros to release the Backup domain reset.
- */
-#define __HAL_RCC_BACKUPRESET_RELEASE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = DISABLE)
-
-/**
- * @}
- */
-
-/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management
- * @brief macros to manage the specified RCC Flags and interrupts.
- * @{
- */
-
-/** @brief Enable RCC interrupt.
- * @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled.
- * This parameter can be any combination of the following values:
- * @arg @ref RCC_IT_LSIRDY LSI ready interrupt
- * @arg @ref RCC_IT_LSERDY LSE ready interrupt
- * @arg @ref RCC_IT_HSIRDY HSI ready interrupt
- * @arg @ref RCC_IT_HSERDY HSE ready interrupt
- * @arg @ref RCC_IT_PLLRDY main PLL ready interrupt
- @if STM32F105xx
- * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt.
- * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt.
- @elsif STM32F107xx
- * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt.
- * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt.
- @endif
- */
-#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__))
-
-/** @brief Disable RCC interrupt.
- * @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled.
- * This parameter can be any combination of the following values:
- * @arg @ref RCC_IT_LSIRDY LSI ready interrupt
- * @arg @ref RCC_IT_LSERDY LSE ready interrupt
- * @arg @ref RCC_IT_HSIRDY HSI ready interrupt
- * @arg @ref RCC_IT_HSERDY HSE ready interrupt
- * @arg @ref RCC_IT_PLLRDY main PLL ready interrupt
- @if STM32F105xx
- * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt.
- * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt.
- @elsif STM32F107xx
- * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt.
- * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt.
- @endif
- */
-#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= (uint8_t)(~(__INTERRUPT__)))
-
-/** @brief Clear the RCC's interrupt pending bits.
- * @param __INTERRUPT__ specifies the interrupt pending bit to clear.
- * This parameter can be any combination of the following values:
- * @arg @ref RCC_IT_LSIRDY LSI ready interrupt.
- * @arg @ref RCC_IT_LSERDY LSE ready interrupt.
- * @arg @ref RCC_IT_HSIRDY HSI ready interrupt.
- * @arg @ref RCC_IT_HSERDY HSE ready interrupt.
- * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt.
- @if STM32F105xx
- * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt.
- * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt.
- @elsif STM32F107xx
- * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt.
- * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt.
- @endif
- * @arg @ref RCC_IT_CSS Clock Security System interrupt
- */
-#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__))
-
-/** @brief Check the RCC's interrupt has occurred or not.
- * @param __INTERRUPT__ specifies the RCC interrupt source to check.
- * This parameter can be one of the following values:
- * @arg @ref RCC_IT_LSIRDY LSI ready interrupt.
- * @arg @ref RCC_IT_LSERDY LSE ready interrupt.
- * @arg @ref RCC_IT_HSIRDY HSI ready interrupt.
- * @arg @ref RCC_IT_HSERDY HSE ready interrupt.
- * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt.
- @if STM32F105xx
- * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt.
- * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt.
- @elsif STM32F107xx
- * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt.
- * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt.
- @endif
- * @arg @ref RCC_IT_CSS Clock Security System interrupt
- * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
- */
-#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__))
-
-/** @brief Set RMVF bit to clear the reset flags.
- * The reset flags are RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST,
- * RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST
- */
-#define __HAL_RCC_CLEAR_RESET_FLAGS() (*(__IO uint32_t *)RCC_CSR_RMVF_BB = ENABLE)
-
-/** @brief Check RCC flag is set or not.
- * @param __FLAG__ specifies the flag to check.
- * This parameter can be one of the following values:
- * @arg @ref RCC_FLAG_HSIRDY HSI oscillator clock ready.
- * @arg @ref RCC_FLAG_HSERDY HSE oscillator clock ready.
- * @arg @ref RCC_FLAG_PLLRDY Main PLL clock ready.
- @if STM32F105xx
- * @arg @ref RCC_FLAG_PLL2RDY Main PLL2 clock ready.
- * @arg @ref RCC_FLAG_PLLI2SRDY Main PLLI2S clock ready.
- @elsif STM32F107xx
- * @arg @ref RCC_FLAG_PLL2RDY Main PLL2 clock ready.
- * @arg @ref RCC_FLAG_PLLI2SRDY Main PLLI2S clock ready.
- @endif
- * @arg @ref RCC_FLAG_LSERDY LSE oscillator clock ready.
- * @arg @ref RCC_FLAG_LSIRDY LSI oscillator clock ready.
- * @arg @ref RCC_FLAG_PINRST Pin reset.
- * @arg @ref RCC_FLAG_PORRST POR/PDR reset.
- * @arg @ref RCC_FLAG_SFTRST Software reset.
- * @arg @ref RCC_FLAG_IWDGRST Independent Watchdog reset.
- * @arg @ref RCC_FLAG_WWDGRST Window Watchdog reset.
- * @arg @ref RCC_FLAG_LPWRRST Low Power reset.
- * @retval The new state of __FLAG__ (TRUE or FALSE).
- */
-#define __HAL_RCC_GET_FLAG(__FLAG__) (((((__FLAG__) >> 5) == CR_REG_INDEX)? RCC->CR : \
- ((((__FLAG__) >> 5) == BDCR_REG_INDEX)? RCC->BDCR : \
- RCC->CSR)) & ((uint32_t)1 << ((__FLAG__) & RCC_FLAG_MASK)))
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Include RCC HAL Extension module */
-#include "stm32f1xx_hal_rcc_ex.h"
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup RCC_Exported_Functions
- * @{
- */
-
-/** @addtogroup RCC_Exported_Functions_Group1
- * @{
- */
-
-/* Initialization and de-initialization functions ******************************/
-void HAL_RCC_DeInit(void);
-HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
-HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency);
-
-/**
- * @}
- */
-
-/** @addtogroup RCC_Exported_Functions_Group2
- * @{
- */
-
-/* Peripheral Control functions ************************************************/
-void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv);
-void HAL_RCC_EnableCSS(void);
-void HAL_RCC_DisableCSS(void);
-uint32_t HAL_RCC_GetSysClockFreq(void);
-uint32_t HAL_RCC_GetHCLKFreq(void);
-uint32_t HAL_RCC_GetPCLK1Freq(void);
-uint32_t HAL_RCC_GetPCLK2Freq(void);
-void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
-void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency);
-
-/* CSS NMI IRQ handler */
-void HAL_RCC_NMI_IRQHandler(void);
-
-/* User Callbacks in non blocking mode (IT mode) */
-void HAL_RCC_CSSCallback(void);
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F1xx_HAL_RCC_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
deleted file mode 100644
index 9871f4a..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
+++ /dev/null
@@ -1,1926 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_rcc_ex.h
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief Header file of RCC HAL Extension module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F1xx_HAL_RCC_EX_H
-#define __STM32F1xx_HAL_RCC_EX_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal_def.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup RCCEx
- * @{
- */
-
-/** @addtogroup RCCEx_Private_Constants
- * @{
- */
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
-
-/* Alias word address of PLLI2SON bit */
-#define PLLI2SON_BITNUMBER POSITION_VAL(RCC_CR_PLL3ON)
-#define RCC_CR_PLLI2SON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32) + (PLLI2SON_BITNUMBER * 4)))
-/* Alias word address of PLL2ON bit */
-#define PLL2ON_BITNUMBER POSITION_VAL(RCC_CR_PLL2ON)
-#define RCC_CR_PLL2ON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32) + (PLL2ON_BITNUMBER * 4)))
-
-#define PLLI2S_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
-#define PLL2_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
-
-#endif /* STM32F105xC || STM32F107xC */
-
-
-#define CR_REG_INDEX ((uint8_t)1)
-
-/**
- * @}
- */
-
-/** @addtogroup RCCEx_Private_Macros
- * @{
- */
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
-#define IS_RCC_PREDIV1_SOURCE(__SOURCE__) (((__SOURCE__) == RCC_PREDIV1_SOURCE_HSE) || \
- ((__SOURCE__) == RCC_PREDIV1_SOURCE_PLL2))
-#endif /* STM32F105xC || STM32F107xC */
-
-#if defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F100xB)\
- || defined(STM32F100xE)
-#define IS_RCC_HSE_PREDIV(__DIV__) (((__DIV__) == RCC_HSE_PREDIV_DIV1) || ((__DIV__) == RCC_HSE_PREDIV_DIV2) || \
- ((__DIV__) == RCC_HSE_PREDIV_DIV3) || ((__DIV__) == RCC_HSE_PREDIV_DIV4) || \
- ((__DIV__) == RCC_HSE_PREDIV_DIV5) || ((__DIV__) == RCC_HSE_PREDIV_DIV6) || \
- ((__DIV__) == RCC_HSE_PREDIV_DIV7) || ((__DIV__) == RCC_HSE_PREDIV_DIV8) || \
- ((__DIV__) == RCC_HSE_PREDIV_DIV9) || ((__DIV__) == RCC_HSE_PREDIV_DIV10) || \
- ((__DIV__) == RCC_HSE_PREDIV_DIV11) || ((__DIV__) == RCC_HSE_PREDIV_DIV12) || \
- ((__DIV__) == RCC_HSE_PREDIV_DIV13) || ((__DIV__) == RCC_HSE_PREDIV_DIV14) || \
- ((__DIV__) == RCC_HSE_PREDIV_DIV15) || ((__DIV__) == RCC_HSE_PREDIV_DIV16))
-
-#else
-#define IS_RCC_HSE_PREDIV(__DIV__) (((__DIV__) == RCC_HSE_PREDIV_DIV1) || ((__DIV__) == RCC_HSE_PREDIV_DIV2))
-#endif /* STM32F105xC || STM32F107xC || STM32F100xB || STM32F100xE */
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
-#define IS_RCC_PLL_MUL(__MUL__) (((__MUL__) == RCC_PLL_MUL4) || ((__MUL__) == RCC_PLL_MUL5) || \
- ((__MUL__) == RCC_PLL_MUL6) || ((__MUL__) == RCC_PLL_MUL7) || \
- ((__MUL__) == RCC_PLL_MUL8) || ((__MUL__) == RCC_PLL_MUL9) || \
- ((__MUL__) == RCC_PLL_MUL6_5))
-
-#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || ((__SOURCE__) == RCC_MCO1SOURCE_HSI) \
- || ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) \
- || ((__SOURCE__) == RCC_MCO1SOURCE_PLL2CLK) || ((__SOURCE__) == RCC_MCO1SOURCE_PLL3CLK) \
- || ((__SOURCE__) == RCC_MCO1SOURCE_PLL3CLK_DIV2) || ((__SOURCE__) == RCC_MCO1SOURCE_EXT_HSE) \
- || ((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK))
-
-#else
-#define IS_RCC_PLL_MUL(__MUL__) (((__MUL__) == RCC_PLL_MUL2) || ((__MUL__) == RCC_PLL_MUL3) || \
- ((__MUL__) == RCC_PLL_MUL4) || ((__MUL__) == RCC_PLL_MUL5) || \
- ((__MUL__) == RCC_PLL_MUL6) || ((__MUL__) == RCC_PLL_MUL7) || \
- ((__MUL__) == RCC_PLL_MUL8) || ((__MUL__) == RCC_PLL_MUL9) || \
- ((__MUL__) == RCC_PLL_MUL10) || ((__MUL__) == RCC_PLL_MUL11) || \
- ((__MUL__) == RCC_PLL_MUL12) || ((__MUL__) == RCC_PLL_MUL13) || \
- ((__MUL__) == RCC_PLL_MUL14) || ((__MUL__) == RCC_PLL_MUL15) || \
- ((__MUL__) == RCC_PLL_MUL16))
-
-#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || ((__SOURCE__) == RCC_MCO1SOURCE_HSI) \
- || ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) \
- || ((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK))
-
-#endif /* STM32F105xC || STM32F107xC*/
-
-#define IS_RCC_ADCPLLCLK_DIV(__ADCCLK__) (((__ADCCLK__) == RCC_ADCPCLK2_DIV2) || ((__ADCCLK__) == RCC_ADCPCLK2_DIV4) || \
- ((__ADCCLK__) == RCC_ADCPCLK2_DIV6) || ((__ADCCLK__) == RCC_ADCPCLK2_DIV8))
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
-#define IS_RCC_I2S2CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_I2S2CLKSOURCE_SYSCLK) || ((__SOURCE__) == RCC_I2S2CLKSOURCE_PLLI2S_VCO))
-
-#define IS_RCC_I2S3CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_I2S3CLKSOURCE_SYSCLK) || ((__SOURCE__) == RCC_I2S3CLKSOURCE_PLLI2S_VCO))
-
-#define IS_RCC_USBPLLCLK_DIV(__USBCLK__) (((__USBCLK__) == RCC_USBCLKSOURCE_PLL_DIV2) || ((__USBCLK__) == RCC_USBCLKSOURCE_PLL_DIV3))
-
-#define IS_RCC_PLLI2S_MUL(__MUL__) (((__MUL__) == RCC_PLLI2S_MUL8) || ((__MUL__) == RCC_PLLI2S_MUL9) || \
- ((__MUL__) == RCC_PLLI2S_MUL10) || ((__MUL__) == RCC_PLLI2S_MUL11) || \
- ((__MUL__) == RCC_PLLI2S_MUL12) || ((__MUL__) == RCC_PLLI2S_MUL13) || \
- ((__MUL__) == RCC_PLLI2S_MUL14) || ((__MUL__) == RCC_PLLI2S_MUL16) || \
- ((__MUL__) == RCC_PLLI2S_MUL20))
-
-#define IS_RCC_HSE_PREDIV2(__DIV__) (((__DIV__) == RCC_HSE_PREDIV2_DIV1) || ((__DIV__) == RCC_HSE_PREDIV2_DIV2) || \
- ((__DIV__) == RCC_HSE_PREDIV2_DIV3) || ((__DIV__) == RCC_HSE_PREDIV2_DIV4) || \
- ((__DIV__) == RCC_HSE_PREDIV2_DIV5) || ((__DIV__) == RCC_HSE_PREDIV2_DIV6) || \
- ((__DIV__) == RCC_HSE_PREDIV2_DIV7) || ((__DIV__) == RCC_HSE_PREDIV2_DIV8) || \
- ((__DIV__) == RCC_HSE_PREDIV2_DIV9) || ((__DIV__) == RCC_HSE_PREDIV2_DIV10) || \
- ((__DIV__) == RCC_HSE_PREDIV2_DIV11) || ((__DIV__) == RCC_HSE_PREDIV2_DIV12) || \
- ((__DIV__) == RCC_HSE_PREDIV2_DIV13) || ((__DIV__) == RCC_HSE_PREDIV2_DIV14) || \
- ((__DIV__) == RCC_HSE_PREDIV2_DIV15) || ((__DIV__) == RCC_HSE_PREDIV2_DIV16))
-
-#define IS_RCC_PLL2(__PLL__) (((__PLL__) == RCC_PLL2_NONE) || ((__PLL__) == RCC_PLL2_OFF) || \
- ((__PLL__) == RCC_PLL2_ON))
-
-#define IS_RCC_PLL2_MUL(__MUL__) (((__MUL__) == RCC_PLL2_MUL8) || ((__MUL__) == RCC_PLL2_MUL9) || \
- ((__MUL__) == RCC_PLL2_MUL10) || ((__MUL__) == RCC_PLL2_MUL11) || \
- ((__MUL__) == RCC_PLL2_MUL12) || ((__MUL__) == RCC_PLL2_MUL13) || \
- ((__MUL__) == RCC_PLL2_MUL14) || ((__MUL__) == RCC_PLL2_MUL16) || \
- ((__MUL__) == RCC_PLL2_MUL20))
-
-#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
- ((((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2S3) == RCC_PERIPHCLK_I2S3) || \
- (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB))
-
-#elif defined(STM32F103xE) || defined(STM32F103xG)
-
-#define IS_RCC_I2S2CLKSOURCE(__SOURCE__) ((__SOURCE__) == RCC_I2S2CLKSOURCE_SYSCLK)
-
-#define IS_RCC_I2S3CLKSOURCE(__SOURCE__) ((__SOURCE__) == RCC_I2S3CLKSOURCE_SYSCLK)
-
-#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
- ((((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2S3) == RCC_PERIPHCLK_I2S3) || \
- (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB))
-
-
-#elif defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\
- || defined(STM32F103xB)
-
-#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
- ((((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB))
-
-#else
-
-#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
- ((((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC))
-
-#endif /* STM32F105xC || STM32F107xC */
-
-#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\
- || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
-
-#define IS_RCC_USBPLLCLK_DIV(__USBCLK__) (((__USBCLK__) == RCC_USBCLKSOURCE_PLL) || ((__USBCLK__) == RCC_USBCLKSOURCE_PLL_DIV1_5))
-
-#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */
-
-/**
- * @}
- */
-
-/* Exported types ------------------------------------------------------------*/
-
-/** @defgroup RCCEx_Exported_Types RCCEx Exported Types
- * @{
- */
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
-/**
- * @brief RCC PLL2 configuration structure definition
- */
-typedef struct
-{
- uint32_t PLL2State; /*!< The new state of the PLL2.
- This parameter can be a value of @ref RCCEx_PLL2_Config */
-
- uint32_t PLL2MUL; /*!< PLL2MUL: Multiplication factor for PLL2 VCO input clock
- This parameter must be a value of @ref RCCEx_PLL2_Multiplication_Factor*/
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
- uint32_t HSEPrediv2Value; /*!< The Prediv2 factor value.
- This parameter can be a value of @ref RCCEx_Prediv2_Factor */
-
-#endif /* STM32F105xC || STM32F107xC */
-} RCC_PLL2InitTypeDef;
-
-#endif /* STM32F105xC || STM32F107xC */
-
-/**
- * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition
- */
-typedef struct
-{
- uint32_t OscillatorType; /*!< The oscillators to be configured.
- This parameter can be a value of @ref RCC_Oscillator_Type */
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
- uint32_t Prediv1Source; /*!< The Prediv1 source value.
- This parameter can be a value of @ref RCCEx_Prediv1_Source */
-#endif /* STM32F105xC || STM32F107xC */
-
- uint32_t HSEState; /*!< The new state of the HSE.
- This parameter can be a value of @ref RCC_HSE_Config */
-
- uint32_t HSEPredivValue; /*!< The Prediv1 factor value (named PREDIV1 or PLLXTPRE in RM)
- This parameter can be a value of @ref RCCEx_Prediv1_Factor */
-
- uint32_t LSEState; /*!< The new state of the LSE.
- This parameter can be a value of @ref RCC_LSE_Config */
-
- uint32_t HSIState; /*!< The new state of the HSI.
- This parameter can be a value of @ref RCC_HSI_Config */
-
- uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT).
- This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
-
- uint32_t LSIState; /*!< The new state of the LSI.
- This parameter can be a value of @ref RCC_LSI_Config */
-
- RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
- RCC_PLL2InitTypeDef PLL2; /*!< PLL2 structure parameters */
-#endif /* STM32F105xC || STM32F107xC */
-} RCC_OscInitTypeDef;
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
-/**
- * @brief RCC PLLI2S configuration structure definition
- */
-typedef struct
-{
- uint32_t PLLI2SMUL; /*!< PLLI2SMUL: Multiplication factor for PLLI2S VCO input clock
- This parameter must be a value of @ref RCCEx_PLLI2S_Multiplication_Factor*/
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
- uint32_t HSEPrediv2Value; /*!< The Prediv2 factor value.
- This parameter can be a value of @ref RCCEx_Prediv2_Factor */
-
-#endif /* STM32F105xC || STM32F107xC */
-} RCC_PLLI2SInitTypeDef;
-#endif /* STM32F105xC || STM32F107xC */
-
-/**
- * @brief RCC extended clocks structure definition
- */
-typedef struct
-{
- uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
- This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
-
- uint32_t RTCClockSelection; /*!< specifies the RTC clock source.
- This parameter can be a value of @ref RCC_RTC_Clock_Source */
-
- uint32_t AdcClockSelection; /*!< ADC clock source
- This parameter can be a value of @ref RCCEx_ADC_Prescaler */
-
-#if defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\
- || defined(STM32F107xC)
- uint32_t I2s2ClockSelection; /*!< I2S2 clock source
- This parameter can be a value of @ref RCCEx_I2S2_Clock_Source */
-
- uint32_t I2s3ClockSelection; /*!< I2S3 clock source
- This parameter can be a value of @ref RCCEx_I2S3_Clock_Source */
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
- RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters
- This parameter will be used only when PLLI2S is selected as Clock Source I2S2 or I2S3 */
-
-#endif /* STM32F105xC || STM32F107xC */
-#endif /* STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
-
-#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\
- || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\
- || defined(STM32F105xC) || defined(STM32F107xC)
- uint32_t UsbClockSelection; /*!< USB clock source
- This parameter can be a value of @ref RCCEx_USB_Prescaler */
-
-#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
-} RCC_PeriphCLKInitTypeDef;
-
-/**
- * @}
- */
-
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants
- * @{
- */
-
-/** @defgroup RCCEx_Periph_Clock_Selection Periph Clock Selection
- * @{
- */
-#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000001)
-#define RCC_PERIPHCLK_ADC ((uint32_t)0x00000002)
-#if defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\
- || defined(STM32F107xC)
-#define RCC_PERIPHCLK_I2S2 ((uint32_t)0x00000004)
-#define RCC_PERIPHCLK_I2S3 ((uint32_t)0x00000008)
-#endif /* STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
-#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\
- || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\
- || defined(STM32F105xC) || defined(STM32F107xC)
-#define RCC_PERIPHCLK_USB ((uint32_t)0x00000010)
-#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
-
-/**
- * @}
- */
-
-/** @defgroup RCCEx_ADC_Prescaler ADC Prescaler
- * @{
- */
-#define RCC_ADCPCLK2_DIV2 RCC_CFGR_ADCPRE_DIV2
-#define RCC_ADCPCLK2_DIV4 RCC_CFGR_ADCPRE_DIV4
-#define RCC_ADCPCLK2_DIV6 RCC_CFGR_ADCPRE_DIV6
-#define RCC_ADCPCLK2_DIV8 RCC_CFGR_ADCPRE_DIV8
-
-/**
- * @}
- */
-
-#if defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\
- || defined(STM32F107xC)
-/** @defgroup RCCEx_I2S2_Clock_Source I2S2 Clock Source
- * @{
- */
-#define RCC_I2S2CLKSOURCE_SYSCLK ((uint32_t)0x00000000)
-#if defined(STM32F105xC) || defined(STM32F107xC)
-#define RCC_I2S2CLKSOURCE_PLLI2S_VCO RCC_CFGR2_I2S2SRC
-#endif /* STM32F105xC || STM32F107xC */
-
-/**
- * @}
- */
-
-/** @defgroup RCCEx_I2S3_Clock_Source I2S3 Clock Source
- * @{
- */
-#define RCC_I2S3CLKSOURCE_SYSCLK ((uint32_t)0x00000000)
-#if defined(STM32F105xC) || defined(STM32F107xC)
-#define RCC_I2S3CLKSOURCE_PLLI2S_VCO RCC_CFGR2_I2S3SRC
-#endif /* STM32F105xC || STM32F107xC */
-
-/**
- * @}
- */
-
-#endif /* STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
-
-#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\
- || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
-
-/** @defgroup RCCEx_USB_Prescaler USB Prescaler
- * @{
- */
-#define RCC_USBCLKSOURCE_PLL RCC_CFGR_USBPRE
-#define RCC_USBCLKSOURCE_PLL_DIV1_5 ((uint32_t)0x00000000)
-
-/**
- * @}
- */
-
-#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */
-
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
-/** @defgroup RCCEx_USB_Prescaler USB Prescaler
- * @{
- */
-#define RCC_USBCLKSOURCE_PLL_DIV2 RCC_CFGR_OTGFSPRE
-#define RCC_USBCLKSOURCE_PLL_DIV3 ((uint32_t)0x00000000)
-
-/**
- * @}
- */
-
-/** @defgroup RCCEx_PLLI2S_Multiplication_Factor PLLI2S Multiplication Factor
- * @{
- */
-
-#define RCC_PLLI2S_MUL8 RCC_CFGR2_PLL3MUL8 /*!< PLLI2S input clock * 8 */
-#define RCC_PLLI2S_MUL9 RCC_CFGR2_PLL3MUL9 /*!< PLLI2S input clock * 9 */
-#define RCC_PLLI2S_MUL10 RCC_CFGR2_PLL3MUL10 /*!< PLLI2S input clock * 10 */
-#define RCC_PLLI2S_MUL11 RCC_CFGR2_PLL3MUL11 /*!< PLLI2S input clock * 11 */
-#define RCC_PLLI2S_MUL12 RCC_CFGR2_PLL3MUL12 /*!< PLLI2S input clock * 12 */
-#define RCC_PLLI2S_MUL13 RCC_CFGR2_PLL3MUL13 /*!< PLLI2S input clock * 13 */
-#define RCC_PLLI2S_MUL14 RCC_CFGR2_PLL3MUL14 /*!< PLLI2S input clock * 14 */
-#define RCC_PLLI2S_MUL16 RCC_CFGR2_PLL3MUL16 /*!< PLLI2S input clock * 16 */
-#define RCC_PLLI2S_MUL20 RCC_CFGR2_PLL3MUL20 /*!< PLLI2S input clock * 20 */
-
-/**
- * @}
- */
-#endif /* STM32F105xC || STM32F107xC */
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
-/** @defgroup RCCEx_Prediv1_Source Prediv1 Source
- * @{
- */
-
-#define RCC_PREDIV1_SOURCE_HSE RCC_CFGR2_PREDIV1SRC_HSE
-#define RCC_PREDIV1_SOURCE_PLL2 RCC_CFGR2_PREDIV1SRC_PLL2
-
-/**
- * @}
- */
-#endif /* STM32F105xC || STM32F107xC */
-
-/** @defgroup RCCEx_Prediv1_Factor HSE Prediv1 Factor
- * @{
- */
-
-#define RCC_HSE_PREDIV_DIV1 ((uint32_t)0x00000000)
-
-#if defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F100xB)\
- || defined(STM32F100xE)
-#define RCC_HSE_PREDIV_DIV2 RCC_CFGR2_PREDIV1_DIV2
-#define RCC_HSE_PREDIV_DIV3 RCC_CFGR2_PREDIV1_DIV3
-#define RCC_HSE_PREDIV_DIV4 RCC_CFGR2_PREDIV1_DIV4
-#define RCC_HSE_PREDIV_DIV5 RCC_CFGR2_PREDIV1_DIV5
-#define RCC_HSE_PREDIV_DIV6 RCC_CFGR2_PREDIV1_DIV6
-#define RCC_HSE_PREDIV_DIV7 RCC_CFGR2_PREDIV1_DIV7
-#define RCC_HSE_PREDIV_DIV8 RCC_CFGR2_PREDIV1_DIV8
-#define RCC_HSE_PREDIV_DIV9 RCC_CFGR2_PREDIV1_DIV9
-#define RCC_HSE_PREDIV_DIV10 RCC_CFGR2_PREDIV1_DIV10
-#define RCC_HSE_PREDIV_DIV11 RCC_CFGR2_PREDIV1_DIV11
-#define RCC_HSE_PREDIV_DIV12 RCC_CFGR2_PREDIV1_DIV12
-#define RCC_HSE_PREDIV_DIV13 RCC_CFGR2_PREDIV1_DIV13
-#define RCC_HSE_PREDIV_DIV14 RCC_CFGR2_PREDIV1_DIV14
-#define RCC_HSE_PREDIV_DIV15 RCC_CFGR2_PREDIV1_DIV15
-#define RCC_HSE_PREDIV_DIV16 RCC_CFGR2_PREDIV1_DIV16
-#else
-#define RCC_HSE_PREDIV_DIV2 RCC_CFGR_PLLXTPRE
-#endif /* STM32F105xC || STM32F107xC || STM32F100xB || STM32F100xE */
-
-/**
- * @}
- */
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
-/** @defgroup RCCEx_Prediv2_Factor HSE Prediv2 Factor
- * @{
- */
-
-#define RCC_HSE_PREDIV2_DIV1 RCC_CFGR2_PREDIV2_DIV1 /*!< PREDIV2 input clock not divided */
-#define RCC_HSE_PREDIV2_DIV2 RCC_CFGR2_PREDIV2_DIV2 /*!< PREDIV2 input clock divided by 2 */
-#define RCC_HSE_PREDIV2_DIV3 RCC_CFGR2_PREDIV2_DIV3 /*!< PREDIV2 input clock divided by 3 */
-#define RCC_HSE_PREDIV2_DIV4 RCC_CFGR2_PREDIV2_DIV4 /*!< PREDIV2 input clock divided by 4 */
-#define RCC_HSE_PREDIV2_DIV5 RCC_CFGR2_PREDIV2_DIV5 /*!< PREDIV2 input clock divided by 5 */
-#define RCC_HSE_PREDIV2_DIV6 RCC_CFGR2_PREDIV2_DIV6 /*!< PREDIV2 input clock divided by 6 */
-#define RCC_HSE_PREDIV2_DIV7 RCC_CFGR2_PREDIV2_DIV7 /*!< PREDIV2 input clock divided by 7 */
-#define RCC_HSE_PREDIV2_DIV8 RCC_CFGR2_PREDIV2_DIV8 /*!< PREDIV2 input clock divided by 8 */
-#define RCC_HSE_PREDIV2_DIV9 RCC_CFGR2_PREDIV2_DIV9 /*!< PREDIV2 input clock divided by 9 */
-#define RCC_HSE_PREDIV2_DIV10 RCC_CFGR2_PREDIV2_DIV10 /*!< PREDIV2 input clock divided by 10 */
-#define RCC_HSE_PREDIV2_DIV11 RCC_CFGR2_PREDIV2_DIV11 /*!< PREDIV2 input clock divided by 11 */
-#define RCC_HSE_PREDIV2_DIV12 RCC_CFGR2_PREDIV2_DIV12 /*!< PREDIV2 input clock divided by 12 */
-#define RCC_HSE_PREDIV2_DIV13 RCC_CFGR2_PREDIV2_DIV13 /*!< PREDIV2 input clock divided by 13 */
-#define RCC_HSE_PREDIV2_DIV14 RCC_CFGR2_PREDIV2_DIV14 /*!< PREDIV2 input clock divided by 14 */
-#define RCC_HSE_PREDIV2_DIV15 RCC_CFGR2_PREDIV2_DIV15 /*!< PREDIV2 input clock divided by 15 */
-#define RCC_HSE_PREDIV2_DIV16 RCC_CFGR2_PREDIV2_DIV16 /*!< PREDIV2 input clock divided by 16 */
-
-/**
- * @}
- */
-
-/** @defgroup RCCEx_PLL2_Config PLL Config
- * @{
- */
-#define RCC_PLL2_NONE ((uint32_t)0x00000000)
-#define RCC_PLL2_OFF ((uint32_t)0x00000001)
-#define RCC_PLL2_ON ((uint32_t)0x00000002)
-
-/**
- * @}
- */
-
-/** @defgroup RCCEx_PLL2_Multiplication_Factor PLL2 Multiplication Factor
- * @{
- */
-
-#define RCC_PLL2_MUL8 RCC_CFGR2_PLL2MUL8 /*!< PLL2 input clock * 8 */
-#define RCC_PLL2_MUL9 RCC_CFGR2_PLL2MUL9 /*!< PLL2 input clock * 9 */
-#define RCC_PLL2_MUL10 RCC_CFGR2_PLL2MUL10 /*!< PLL2 input clock * 10 */
-#define RCC_PLL2_MUL11 RCC_CFGR2_PLL2MUL11 /*!< PLL2 input clock * 11 */
-#define RCC_PLL2_MUL12 RCC_CFGR2_PLL2MUL12 /*!< PLL2 input clock * 12 */
-#define RCC_PLL2_MUL13 RCC_CFGR2_PLL2MUL13 /*!< PLL2 input clock * 13 */
-#define RCC_PLL2_MUL14 RCC_CFGR2_PLL2MUL14 /*!< PLL2 input clock * 14 */
-#define RCC_PLL2_MUL16 RCC_CFGR2_PLL2MUL16 /*!< PLL2 input clock * 16 */
-#define RCC_PLL2_MUL20 RCC_CFGR2_PLL2MUL20 /*!< PLL2 input clock * 20 */
-
-/**
- * @}
- */
-
-#endif /* STM32F105xC || STM32F107xC */
-
-/** @defgroup RCCEx_PLL_Multiplication_Factor PLL Multiplication Factor
- * @{
- */
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
-#else
-#define RCC_PLL_MUL2 RCC_CFGR_PLLMULL2
-#define RCC_PLL_MUL3 RCC_CFGR_PLLMULL3
-#endif /* STM32F105xC || STM32F107xC */
-#define RCC_PLL_MUL4 RCC_CFGR_PLLMULL4
-#define RCC_PLL_MUL5 RCC_CFGR_PLLMULL5
-#define RCC_PLL_MUL6 RCC_CFGR_PLLMULL6
-#define RCC_PLL_MUL7 RCC_CFGR_PLLMULL7
-#define RCC_PLL_MUL8 RCC_CFGR_PLLMULL8
-#define RCC_PLL_MUL9 RCC_CFGR_PLLMULL9
-#if defined(STM32F105xC) || defined(STM32F107xC)
-#define RCC_PLL_MUL6_5 RCC_CFGR_PLLMULL6_5
-#else
-#define RCC_PLL_MUL10 RCC_CFGR_PLLMULL10
-#define RCC_PLL_MUL11 RCC_CFGR_PLLMULL11
-#define RCC_PLL_MUL12 RCC_CFGR_PLLMULL12
-#define RCC_PLL_MUL13 RCC_CFGR_PLLMULL13
-#define RCC_PLL_MUL14 RCC_CFGR_PLLMULL14
-#define RCC_PLL_MUL15 RCC_CFGR_PLLMULL15
-#define RCC_PLL_MUL16 RCC_CFGR_PLLMULL16
-#endif /* STM32F105xC || STM32F107xC */
-
-/**
- * @}
- */
-
-/** @defgroup RCCEx_MCO1_Clock_Source MCO1 Clock Source
- * @{
- */
-#define RCC_MCO1SOURCE_NOCLOCK ((uint32_t)RCC_CFGR_MCO_NOCLOCK)
-#define RCC_MCO1SOURCE_SYSCLK ((uint32_t)RCC_CFGR_MCO_SYSCLK)
-#define RCC_MCO1SOURCE_HSI ((uint32_t)RCC_CFGR_MCO_HSI)
-#define RCC_MCO1SOURCE_HSE ((uint32_t)RCC_CFGR_MCO_HSE)
-#define RCC_MCO1SOURCE_PLLCLK ((uint32_t)RCC_CFGR_MCO_PLLCLK_DIV2)
-#if defined(STM32F105xC) || defined(STM32F107xC)
-#define RCC_MCO1SOURCE_PLL2CLK ((uint32_t)RCC_CFGR_MCO_PLL2CLK)
-#define RCC_MCO1SOURCE_PLL3CLK_DIV2 ((uint32_t)RCC_CFGR_MCO_PLL3CLK_DIV2)
-#define RCC_MCO1SOURCE_EXT_HSE ((uint32_t)RCC_CFGR_MCO_EXT_HSE)
-#define RCC_MCO1SOURCE_PLL3CLK ((uint32_t)RCC_CFGR_MCO_PLL3CLK)
-#endif /* STM32F105xC || STM32F107xC*/
-/**
- * @}
- */
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
-/** @defgroup RCCEx_Interrupt RCCEx Interrupt
- * @{
- */
-#define RCC_IT_PLL2RDY ((uint8_t)RCC_CIR_PLL2RDYF)
-#define RCC_IT_PLLI2SRDY ((uint8_t)RCC_CIR_PLL3RDYF)
-/**
- * @}
- */
-
-/** @defgroup RCCEx_Flag RCCEx Flag
- * Elements values convention: 0XXYYYYYb
- * - YYYYY : Flag position in the register
- * - XX : Register index
- * - 01: CR register
- * @{
- */
-/* Flags in the CR register */
-#define RCC_FLAG_PLL2RDY ((uint8_t)((CR_REG_INDEX << 5) | POSITION_VAL(RCC_CR_PLL2RDY)))
-#define RCC_FLAG_PLLI2SRDY ((uint8_t)((CR_REG_INDEX << 5) | POSITION_VAL(RCC_CR_PLL3RDY)))
-/**
- * @}
- */
-#endif /* STM32F105xC || STM32F107xC*/
-
-/**
- * @}
- */
-
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros
- * @{
- */
-
-/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable Peripheral Clock Enable Disable
- * @brief Enable or disable the AHB1 peripheral clock.
- * @note After reset, the peripheral clock (used for registers read/write access)
- * is disabled and the application software has to enable this clock before
- * using it.
- * @{
- */
-
-#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\
- || defined(STM32F103xG) || defined(STM32F105xC) || defined (STM32F107xC)\
- || defined (STM32F100xE)
-#define __HAL_RCC_DMA2_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA2EN))
-#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG || STM32F105xC || STM32F107xC || STM32F100xE */
-
-#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\
- || defined(STM32F103xG) || defined (STM32F100xE)
-#define __HAL_RCC_FSMC_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_FSMC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FSMCEN))
-#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG || STM32F100xE */
-
-#if defined(STM32F103xE) || defined(STM32F103xG)
-#define __HAL_RCC_SDIO_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->AHBENR, RCC_AHBENR_SDIOEN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_SDIOEN);\
- UNUSED(tmpreg); \
- } while(0)
-
-
-#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_SDIOEN))
-#endif /* STM32F103xE || STM32F103xG */
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
-#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->AHBENR, RCC_AHBENR_OTGFSEN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_OTGFSEN);\
- UNUSED(tmpreg); \
- } while(0)
-
-
-#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_OTGFSEN))
-#endif /* STM32F105xC || STM32F107xC*/
-
-#if defined(STM32F107xC)
-#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACEN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACEN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACTXEN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACTXEN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACRXEN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACRXEN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ETHMACEN))
-#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ETHMACTXEN))
-#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ETHMACRXEN))
-
-/**
- * @brief Enable ETHERNET clock.
- */
-#define __HAL_RCC_ETH_CLK_ENABLE() do { \
- __HAL_RCC_ETHMAC_CLK_ENABLE(); \
- __HAL_RCC_ETHMACTX_CLK_ENABLE(); \
- __HAL_RCC_ETHMACRX_CLK_ENABLE(); \
- } while(0)
-/**
- * @brief Disable ETHERNET clock.
- */
-#define __HAL_RCC_ETH_CLK_DISABLE() do { \
- __HAL_RCC_ETHMACTX_CLK_DISABLE(); \
- __HAL_RCC_ETHMACRX_CLK_DISABLE(); \
- __HAL_RCC_ETHMAC_CLK_DISABLE(); \
- } while(0)
-
-#endif /* STM32F107xC*/
-
-/**
- * @}
- */
-
-/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
- * @brief Get the enable or disable status of the AHB1 peripheral clock.
- * @note After reset, the peripheral clock (used for registers read/write access)
- * is disabled and the application software has to enable this clock before
- * using it.
- * @{
- */
-
-#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\
- || defined(STM32F103xG) || defined(STM32F105xC) || defined (STM32F107xC)\
- || defined (STM32F100xE)
-#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) != RESET)
-#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) == RESET)
-#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG || STM32F105xC || STM32F107xC || STM32F100xE */
-#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\
- || defined(STM32F103xG) || defined (STM32F100xE)
-#define __HAL_RCC_FSMC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_FSMCEN)) != RESET)
-#define __HAL_RCC_FSMC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_FSMCEN)) == RESET)
-#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG || STM32F100xE */
-#if defined(STM32F103xE) || defined(STM32F103xG)
-#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_SDIOEN)) != RESET)
-#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_SDIOEN)) == RESET)
-#endif /* STM32F103xE || STM32F103xG */
-#if defined(STM32F105xC) || defined(STM32F107xC)
-#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_OTGFSEN)) != RESET)
-#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_OTGFSEN)) == RESET)
-#endif /* STM32F105xC || STM32F107xC*/
-#if defined(STM32F107xC)
-#define __HAL_RCC_ETHMAC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACEN)) != RESET)
-#define __HAL_RCC_ETHMAC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACEN)) == RESET)
-#define __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACTXEN)) != RESET)
-#define __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACTXEN)) == RESET)
-#define __HAL_RCC_ETHMACRX_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACRXEN)) != RESET)
-#define __HAL_RCC_ETHMACRX_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACRXEN)) == RESET)
-#endif /* STM32F107xC*/
-
-/**
- * @}
- */
-
-/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Clock Enable Disable
- * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
- * @note After reset, the peripheral clock (used for registers read/write access)
- * is disabled and the application software has to enable this clock before
- * using it.
- * @{
- */
-
-#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE)\
- || defined(STM32F103xG) || defined(STM32F105xC) ||defined(STM32F107xC)
-#define __HAL_RCC_CAN1_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
-#endif /* STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
-
-#if defined(STM32F100xB) || defined(STM32F100xE) || defined(STM32F101xB)\
- || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F102xB)\
- || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\
- || defined(STM32F105xC) || defined(STM32F107xC)
-#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_SPI2_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_USART3_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_I2C2_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
-#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
-#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
-#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
-#endif /* STM32F100xB || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */
-
-#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\
- || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
-#define __HAL_RCC_USB_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_USB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USBEN))
-#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */
-
-#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\
- || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)
-#define __HAL_RCC_TIM5_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_UART4_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_UART5_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_DAC_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN))
-#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
-#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
-#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
-#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
-#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
-#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
-#endif /* STM32F101xE || STM32F103xE || STM32F101xG || (...) || STM32F105xC || STM32F107xC */
-
-#if defined(STM32F100xB) || defined (STM32F100xE)
-#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_DAC_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_CEC_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
-#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
-#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
-#define __HAL_RCC_CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN))
-#endif /* STM32F100xB || STM32F100xE */
-
-#ifdef STM32F100xE
-#define __HAL_RCC_TIM5_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_TIM12_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_TIM13_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_UART4_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_UART5_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN))
-#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
-#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
-#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
-#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
-#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
-#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
-#endif /* STM32F100xE */
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
-#define __HAL_RCC_CAN2_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
-#endif /* STM32F105xC || STM32F107xC */
-
-#if defined(STM32F101xG) || defined(STM32F103xG)
-#define __HAL_RCC_TIM12_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_TIM13_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
-#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
-#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
-#endif /* STM32F101xG || STM32F103xG*/
-
-/**
- * @}
- */
-
-/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status
- * @brief Get the enable or disable status of the APB1 peripheral clock.
- * @note After reset, the peripheral clock (used for registers read/write access)
- * is disabled and the application software has to enable this clock before
- * using it.
- * @{
- */
-
-#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE)\
- || defined(STM32F103xG) || defined(STM32F105xC) ||defined(STM32F107xC)
-#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET)
-#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET)
-#endif /* STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
-#if defined(STM32F100xB) || defined(STM32F100xE) || defined(STM32F101xB)\
- || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F102xB)\
- || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\
- || defined(STM32F105xC) || defined(STM32F107xC)
-#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
-#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
-#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET)
-#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET)
-#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET)
-#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET)
-#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET)
-#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET)
-#endif /* STM32F100xB || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */
-#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\
- || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
-#define __HAL_RCC_USB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) != RESET)
-#define __HAL_RCC_USB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) == RESET)
-#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */
-#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\
- || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)
-#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET)
-#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET)
-#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
-#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
-#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET)
-#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET)
-#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
-#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
-#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET)
-#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET)
-#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET)
-#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET)
-#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET)
-#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET)
-#endif /* STM32F101xE || STM32F103xE || STM32F101xG || (...) || STM32F105xC || STM32F107xC */
-#if defined(STM32F100xB) || defined (STM32F100xE)
-#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
-#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
-#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET)
-#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET)
-#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET)
-#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET)
-#define __HAL_RCC_CEC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) != RESET)
-#define __HAL_RCC_CEC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) == RESET)
-#endif /* STM32F100xB || STM32F100xE */
-#ifdef STM32F100xE
-#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET)
-#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET)
-#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET)
-#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET)
-#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET)
-#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET)
-#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET)
-#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET)
-#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
-#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
-#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET)
-#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET)
-#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET)
-#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET)
-#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET)
-#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET)
-#endif /* STM32F100xE */
-#if defined(STM32F105xC) || defined(STM32F107xC)
-#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET)
-#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET)
-#endif /* STM32F105xC || STM32F107xC */
-#if defined(STM32F101xG) || defined(STM32F103xG)
-#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET)
-#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET)
-#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET)
-#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET)
-#endif /* STM32F101xG || STM32F103xG*/
-
-/**
- * @}
- */
-
-/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Clock Enable Disable
- * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
- * @note After reset, the peripheral clock (used for registers read/write access)
- * is disabled and the application software has to enable this clock before
- * using it.
- * @{
- */
-
-#if defined(STM32F101xG) || defined(STM32F103x6) || defined(STM32F103xB)\
- || defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F103xE)\
- || defined(STM32F103xG)
-#define __HAL_RCC_ADC2_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
-#endif /* STM32F101xG || STM32F103x6 || STM32F103xB || STM32F105xC || STM32F107xC || STM32F103xE || STM32F103xG */
-
-#if defined(STM32F100xB) || defined(STM32F100xE)
-#define __HAL_RCC_TIM15_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_TIM16_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_TIM17_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_TIM15_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM15EN))
-#define __HAL_RCC_TIM16_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM16EN))
-#define __HAL_RCC_TIM17_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM17EN))
-#endif /* STM32F100xB || STM32F100xE */
-
-#if defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE)\
- || defined(STM32F101xG) || defined(STM32F100xB) || defined(STM32F103xB)\
- || defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\
- || defined(STM32F107xC)
-#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPEEN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPEEN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPEEN))
-#endif /* STM32F101x6 || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */
-
-#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\
- || defined(STM32F103xG)
-#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPFEN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPFEN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPGEN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPGEN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPFEN))
-#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPGEN))
-#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG*/
-
-#if defined(STM32F103xE) || defined(STM32F103xG)
-#define __HAL_RCC_TIM8_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_ADC3_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
-#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
-#endif /* STM32F103xE || STM32F103xG */
-
-#if defined(STM32F100xE)
-#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPFEN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPFEN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPGEN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPGEN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPFEN))
-#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPGEN))
-#endif /* STM32F100xE */
-
-#if defined(STM32F101xG) || defined(STM32F103xG)
-#define __HAL_RCC_TIM9_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_TIM10_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_TIM11_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\
- UNUSED(tmpreg); \
- } while(0)
-
-#define __HAL_RCC_TIM9_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM9EN))
-#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
-#define __HAL_RCC_TIM11_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM11EN))
-#endif /* STM32F101xG || STM32F103xG */
-
-/**
- * @}
- */
-
-/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
- * @brief Get the enable or disable status of the APB2 peripheral clock.
- * @note After reset, the peripheral clock (used for registers read/write access)
- * is disabled and the application software has to enable this clock before
- * using it.
- * @{
- */
-
-#if defined(STM32F101xG) || defined(STM32F103x6) || defined(STM32F103xB)\
- || defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F103xE)\
- || defined(STM32F103xG)
-#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET)
-#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET)
-#endif /* STM32F101xG || STM32F103x6 || STM32F103xB || STM32F105xC || STM32F107xC || STM32F103xE || STM32F103xG */
-#if defined(STM32F100xB) || defined(STM32F100xE)
-#define __HAL_RCC_TIM15_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM15EN)) != RESET)
-#define __HAL_RCC_TIM15_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM15EN)) == RESET)
-#define __HAL_RCC_TIM16_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN)) != RESET)
-#define __HAL_RCC_TIM16_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN)) == RESET)
-#define __HAL_RCC_TIM17_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN)) != RESET)
-#define __HAL_RCC_TIM17_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN)) == RESET)
-#endif /* STM32F100xB || STM32F100xE */
-#if defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE)\
- || defined(STM32F101xG) || defined(STM32F100xB) || defined(STM32F103xB)\
- || defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\
- || defined(STM32F107xC)
-#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPEEN)) != RESET)
-#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPEEN)) == RESET)
-#endif /* STM32F101x6 || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */
-#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\
- || defined(STM32F103xG)
-#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPFEN)) != RESET)
-#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPFEN)) == RESET)
-#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPGEN)) != RESET)
-#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPGEN)) == RESET)
-#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG*/
-#if defined(STM32F103xE) || defined(STM32F103xG)
-#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET)
-#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET)
-#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET)
-#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET)
-#endif /* STM32F103xE || STM32F103xG */
-#if defined(STM32F100xE)
-#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPFEN)) != RESET)
-#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPFEN)) == RESET)
-#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPGEN)) != RESET)
-#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPGEN)) == RESET)
-#endif /* STM32F100xE */
-#if defined(STM32F101xG) || defined(STM32F103xG)
-#define __HAL_RCC_TIM9_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) != RESET)
-#define __HAL_RCC_TIM9_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) == RESET)
-#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET)
-#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET)
-#define __HAL_RCC_TIM11_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) != RESET)
-#define __HAL_RCC_TIM11_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) == RESET)
-#endif /* STM32F101xG || STM32F103xG */
-
-/**
- * @}
- */
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
-/** @defgroup RCCEx_Peripheral_Clock_Force_Release Peripheral Clock Force Release
- * @brief Force or release AHB peripheral reset.
- * @{
- */
-#define __HAL_RCC_AHB_FORCE_RESET() (RCC->AHBRSTR = 0xFFFFFFFFU)
-#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_OTGFSRST))
-#if defined(STM32F107xC)
-#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_ETHMACRST))
-#endif /* STM32F107xC */
-
-#define __HAL_RCC_AHB_RELEASE_RESET() (RCC->AHBRSTR = 0x00)
-#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_OTGFSRST))
-#if defined(STM32F107xC)
-#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_ETHMACRST))
-#endif /* STM32F107xC */
-
-/**
- * @}
- */
-#endif /* STM32F105xC || STM32F107xC */
-
-/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset
- * @brief Force or release APB1 peripheral reset.
- * @{
- */
-
-#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE)\
- || defined(STM32F103xG) || defined(STM32F105xC) ||defined(STM32F107xC)
-#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
-
-#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
-#endif /* STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
-
-#if defined(STM32F100xB) || defined(STM32F100xE) || defined(STM32F101xB)\
- || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F102xB)\
- || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\
- || defined(STM32F105xC) || defined(STM32F107xC)
-#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
-#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
-#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
-#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
-
-#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
-#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
-#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
-#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
-#endif /* STM32F100xB || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */
-
-#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\
- || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
-#define __HAL_RCC_USB_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USBRST))
-#define __HAL_RCC_USB_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USBRST))
-#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */
-
-#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\
- || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)
-#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST))
-#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
-#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
-#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
-#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
-#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
-#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
-
-#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST))
-#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
-#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
-#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
-#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
-#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
-#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
-#endif /* STM32F101xE || STM32F103xE || STM32F101xG || (...) || STM32F105xC || STM32F107xC */
-
-#if defined(STM32F100xB) || defined (STM32F100xE)
-#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
-#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
-#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
-#define __HAL_RCC_CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST))
-
-#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
-#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
-#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
-#define __HAL_RCC_CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST))
-#endif /* STM32F100xB || STM32F100xE */
-
-#if defined (STM32F100xE)
-#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST))
-#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
-#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
-#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
-#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
-#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
-#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
-
-#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST))
-#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
-#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
-#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
-#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
-#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
-#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
-#endif /* STM32F100xE */
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
-#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
-
-#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
-#endif /* STM32F105xC || STM32F107xC */
-
-#if defined(STM32F101xG) || defined(STM32F103xG)
-#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
-#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
-#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
-
-#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
-#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
-#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
-#endif /* STM32F101xG || STM32F103xG */
-
-/**
- * @}
- */
-
-/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset
- * @brief Force or release APB2 peripheral reset.
- * @{
- */
-
-#if defined(STM32F101xG) || defined(STM32F103x6) || defined(STM32F103xB)\
- || defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F103xE)\
- || defined(STM32F103xG)
-#define __HAL_RCC_ADC2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC2RST))
-
-#define __HAL_RCC_ADC2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC2RST))
-#endif /* STM32F101xG || STM32F103x6 || STM32F103xB || STM32F105xC || STM32F107xC || STM32F103xE || STM32F103xG */
-
-#if defined(STM32F100xB) || defined(STM32F100xE)
-#define __HAL_RCC_TIM15_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM15RST))
-#define __HAL_RCC_TIM16_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM16RST))
-#define __HAL_RCC_TIM17_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM17RST))
-
-#define __HAL_RCC_TIM15_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM15RST))
-#define __HAL_RCC_TIM16_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM16RST))
-#define __HAL_RCC_TIM17_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM17RST))
-#endif /* STM32F100xB || STM32F100xE */
-
-#if defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE)\
- || defined(STM32F101xG) || defined(STM32F100xB) || defined(STM32F103xB)\
- || defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\
- || defined(STM32F107xC)
-#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPERST))
-
-#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPERST))
-#endif /* STM32F101x6 || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */
-
-#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\
- || defined(STM32F103xG)
-#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPFRST))
-#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPGRST))
-
-#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPFRST))
-#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPGRST))
-#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG*/
-
-#if defined(STM32F103xE) || defined(STM32F103xG)
-#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
-#define __HAL_RCC_ADC3_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC3RST))
-
-#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
-#define __HAL_RCC_ADC3_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC3RST))
-#endif /* STM32F103xE || STM32F103xG */
-
-#if defined(STM32F100xE)
-#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPFRST))
-#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPGRST))
-
-#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPFRST))
-#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPGRST))
-#endif /* STM32F100xE */
-
-#if defined(STM32F101xG) || defined(STM32F103xG)
-#define __HAL_RCC_TIM9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM9RST))
-#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
-#define __HAL_RCC_TIM11_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM11RST))
-
-#define __HAL_RCC_TIM9_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM9RST))
-#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
-#define __HAL_RCC_TIM11_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM11RST))
-#endif /* STM32F101xG || STM32F103xG*/
-
-/**
- * @}
- */
-
-/** @defgroup RCCEx_HSE_Configuration HSE Configuration
- * @{
- */
-
-#if defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F100xB)\
- || defined(STM32F100xE)
-/**
- * @brief Macro to configure the External High Speed oscillator (HSE) Predivision factor for PLL.
- * @note Predivision factor can not be changed if PLL is used as system clock
- * In this case, you have to select another source of the system clock, disable the PLL and
- * then change the HSE predivision factor.
- * @param __HSE_PREDIV_VALUE__ specifies the division value applied to HSE.
- * This parameter must be a number between RCC_HSE_PREDIV_DIV1 and RCC_HSE_PREDIV_DIV16.
- */
-#define __HAL_RCC_HSE_PREDIV_CONFIG(__HSE_PREDIV_VALUE__) MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV1, (uint32_t)(__HSE_PREDIV_VALUE__))
-#else
-/**
- * @brief Macro to configure the External High Speed oscillator (HSE) Predivision factor for PLL.
- * @note Predivision factor can not be changed if PLL is used as system clock
- * In this case, you have to select another source of the system clock, disable the PLL and
- * then change the HSE predivision factor.
- * @param __HSE_PREDIV_VALUE__ specifies the division value applied to HSE.
- * This parameter must be a number between RCC_HSE_PREDIV_DIV1 and RCC_HSE_PREDIV_DIV2.
- */
-#define __HAL_RCC_HSE_PREDIV_CONFIG(__HSE_PREDIV_VALUE__) \
- MODIFY_REG(RCC->CFGR,RCC_CFGR_PLLXTPRE, (uint32_t)(__HSE_PREDIV_VALUE__))
-
-#endif /* STM32F105xC || STM32F107xC */
-
-#if defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F100xB)\
- || defined(STM32F100xE)
-/**
- * @brief Macro to get prediv1 factor for PLL.
- */
-#define __HAL_RCC_HSE_GET_PREDIV() READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV1)
-
-#else
-/**
- * @brief Macro to get prediv1 factor for PLL.
- */
-#define __HAL_RCC_HSE_GET_PREDIV() READ_BIT(RCC->CFGR, RCC_CFGR_PLLXTPRE)
-
-#endif /* STM32F105xC || STM32F107xC || STM32F100xB || STM32F100xE */
-
-/**
- * @}
- */
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
-/** @defgroup RCCEx_PLLI2S_Configuration PLLI2S Configuration
- * @{
- */
-
-/** @brief Macros to enable the main PLLI2S.
- * @note After enabling the main PLLI2S, the application software should wait on
- * PLLI2SRDY flag to be set indicating that PLLI2S clock is stable and can
- * be used as system clock source.
- * @note The main PLLI2S is disabled by hardware when entering STOP and STANDBY modes.
- */
-#define __HAL_RCC_PLLI2S_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = ENABLE)
-
-/** @brief Macros to disable the main PLLI2S.
- * @note The main PLLI2S is disabled by hardware when entering STOP and STANDBY modes.
- */
-#define __HAL_RCC_PLLI2S_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = DISABLE)
-
-/** @brief macros to configure the main PLLI2S multiplication factor.
- * @note This function must be used only when the main PLLI2S is disabled.
- *
- * @param __PLLI2SMUL__ specifies the multiplication factor for PLLI2S VCO output clock
- * This parameter can be one of the following values:
- * @arg @ref RCC_PLLI2S_MUL8 PLLI2SVCO = PLLI2S clock entry x 8
- * @arg @ref RCC_PLLI2S_MUL9 PLLI2SVCO = PLLI2S clock entry x 9
- * @arg @ref RCC_PLLI2S_MUL10 PLLI2SVCO = PLLI2S clock entry x 10
- * @arg @ref RCC_PLLI2S_MUL11 PLLI2SVCO = PLLI2S clock entry x 11
- * @arg @ref RCC_PLLI2S_MUL12 PLLI2SVCO = PLLI2S clock entry x 12
- * @arg @ref RCC_PLLI2S_MUL13 PLLI2SVCO = PLLI2S clock entry x 13
- * @arg @ref RCC_PLLI2S_MUL14 PLLI2SVCO = PLLI2S clock entry x 14
- * @arg @ref RCC_PLLI2S_MUL16 PLLI2SVCO = PLLI2S clock entry x 16
- * @arg @ref RCC_PLLI2S_MUL20 PLLI2SVCO = PLLI2S clock entry x 20
- *
- */
-#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SMUL__)\
- MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PLL3MUL,(__PLLI2SMUL__))
-
-/**
- * @}
- */
-
-#endif /* STM32F105xC || STM32F107xC */
-
-/** @defgroup RCCEx_Peripheral_Configuration Peripheral Configuration
- * @brief Macros to configure clock source of different peripherals.
- * @{
- */
-
-#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\
- || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)
-/** @brief Macro to configure the USB clock.
- * @param __USBCLKSOURCE__ specifies the USB clock source.
- * This parameter can be one of the following values:
- * @arg @ref RCC_USBCLKSOURCE_PLL PLL clock divided by 1 selected as USB clock
- * @arg @ref RCC_USBCLKSOURCE_PLL_DIV1_5 PLL clock divided by 1.5 selected as USB clock
- */
-#define __HAL_RCC_USB_CONFIG(__USBCLKSOURCE__) \
- MODIFY_REG(RCC->CFGR, RCC_CFGR_USBPRE, (uint32_t)(__USBCLKSOURCE__))
-
-/** @brief Macro to get the USB clock (USBCLK).
- * @retval The clock source can be one of the following values:
- * @arg @ref RCC_USBCLKSOURCE_PLL PLL clock divided by 1 selected as USB clock
- * @arg @ref RCC_USBCLKSOURCE_PLL_DIV1_5 PLL clock divided by 1.5 selected as USB clock
- */
-#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_USBPRE)))
-
-#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
-
-/** @brief Macro to configure the USB OTSclock.
- * @param __USBCLKSOURCE__ specifies the USB clock source.
- * This parameter can be one of the following values:
- * @arg @ref RCC_USBCLKSOURCE_PLL_DIV2 PLL clock divided by 2 selected as USB OTG FS clock
- * @arg @ref RCC_USBCLKSOURCE_PLL_DIV3 PLL clock divided by 3 selected as USB OTG FS clock
- */
-#define __HAL_RCC_USB_CONFIG(__USBCLKSOURCE__) \
- MODIFY_REG(RCC->CFGR, RCC_CFGR_OTGFSPRE, (uint32_t)(__USBCLKSOURCE__))
-
-/** @brief Macro to get the USB clock (USBCLK).
- * @retval The clock source can be one of the following values:
- * @arg @ref RCC_USBCLKSOURCE_PLL_DIV2 PLL clock divided by 2 selected as USB OTG FS clock
- * @arg @ref RCC_USBCLKSOURCE_PLL_DIV3 PLL clock divided by 3 selected as USB OTG FS clock
- */
-#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_OTGFSPRE)))
-
-#endif /* STM32F105xC || STM32F107xC */
-
-/** @brief Macro to configure the ADCx clock (x=1 to 3 depending on devices).
- * @param __ADCCLKSOURCE__ specifies the ADC clock source.
- * This parameter can be one of the following values:
- * @arg @ref RCC_ADCPCLK2_DIV2 PCLK2 clock divided by 2 selected as ADC clock
- * @arg @ref RCC_ADCPCLK2_DIV4 PCLK2 clock divided by 4 selected as ADC clock
- * @arg @ref RCC_ADCPCLK2_DIV6 PCLK2 clock divided by 6 selected as ADC clock
- * @arg @ref RCC_ADCPCLK2_DIV8 PCLK2 clock divided by 8 selected as ADC clock
- */
-#define __HAL_RCC_ADC_CONFIG(__ADCCLKSOURCE__) \
- MODIFY_REG(RCC->CFGR, RCC_CFGR_ADCPRE, (uint32_t)(__ADCCLKSOURCE__))
-
-/** @brief Macro to get the ADC clock (ADCxCLK, x=1 to 3 depending on devices).
- * @retval The clock source can be one of the following values:
- * @arg @ref RCC_ADCPCLK2_DIV2 PCLK2 clock divided by 2 selected as ADC clock
- * @arg @ref RCC_ADCPCLK2_DIV4 PCLK2 clock divided by 4 selected as ADC clock
- * @arg @ref RCC_ADCPCLK2_DIV6 PCLK2 clock divided by 6 selected as ADC clock
- * @arg @ref RCC_ADCPCLK2_DIV8 PCLK2 clock divided by 8 selected as ADC clock
- */
-#define __HAL_RCC_GET_ADC_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_ADCPRE)))
-
-/**
- * @}
- */
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
-
-/** @addtogroup RCCEx_HSE_Configuration
- * @{
- */
-
-/**
- * @brief Macro to configure the PLL2 & PLLI2S Predivision factor.
- * @note Predivision factor can not be changed if PLL2 is used indirectly as system clock
- * In this case, you have to select another source of the system clock, disable the PLL2 and PLLI2S and
- * then change the PREDIV2 factor.
- * @param __HSE_PREDIV2_VALUE__ specifies the PREDIV2 value applied to PLL2 & PLLI2S.
- * This parameter must be a number between RCC_HSE_PREDIV2_DIV1 and RCC_HSE_PREDIV2_DIV16.
- */
-#define __HAL_RCC_HSE_PREDIV2_CONFIG(__HSE_PREDIV2_VALUE__) \
- MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV2, (uint32_t)(__HSE_PREDIV2_VALUE__))
-
-/**
- * @brief Macro to get prediv2 factor for PLL2 & PLL3.
- */
-#define __HAL_RCC_HSE_GET_PREDIV2() READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV2)
-
-/**
- * @}
- */
-
-/** @addtogroup RCCEx_PLLI2S_Configuration
- * @{
- */
-
-/** @brief Macros to enable the main PLL2.
- * @note After enabling the main PLL2, the application software should wait on
- * PLL2RDY flag to be set indicating that PLL2 clock is stable and can
- * be used as system clock source.
- * @note The main PLL2 is disabled by hardware when entering STOP and STANDBY modes.
- */
-#define __HAL_RCC_PLL2_ENABLE() (*(__IO uint32_t *) RCC_CR_PLL2ON_BB = ENABLE)
-
-/** @brief Macros to disable the main PLL2.
- * @note The main PLL2 can not be disabled if it is used indirectly as system clock source
- * @note The main PLL2 is disabled by hardware when entering STOP and STANDBY modes.
- */
-#define __HAL_RCC_PLL2_DISABLE() (*(__IO uint32_t *) RCC_CR_PLL2ON_BB = DISABLE)
-
-/** @brief macros to configure the main PLL2 multiplication factor.
- * @note This function must be used only when the main PLL2 is disabled.
- *
- * @param __PLL2MUL__ specifies the multiplication factor for PLL2 VCO output clock
- * This parameter can be one of the following values:
- * @arg @ref RCC_PLL2_MUL8 PLL2VCO = PLL2 clock entry x 8
- * @arg @ref RCC_PLL2_MUL9 PLL2VCO = PLL2 clock entry x 9
- * @arg @ref RCC_PLL2_MUL10 PLL2VCO = PLL2 clock entry x 10
- * @arg @ref RCC_PLL2_MUL11 PLL2VCO = PLL2 clock entry x 11
- * @arg @ref RCC_PLL2_MUL12 PLL2VCO = PLL2 clock entry x 12
- * @arg @ref RCC_PLL2_MUL13 PLL2VCO = PLL2 clock entry x 13
- * @arg @ref RCC_PLL2_MUL14 PLL2VCO = PLL2 clock entry x 14
- * @arg @ref RCC_PLL2_MUL16 PLL2VCO = PLL2 clock entry x 16
- * @arg @ref RCC_PLL2_MUL20 PLL2VCO = PLL2 clock entry x 20
- *
- */
-#define __HAL_RCC_PLL2_CONFIG(__PLL2MUL__)\
- MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PLL2MUL,(__PLL2MUL__))
-
-/**
- * @}
- */
-
-/** @defgroup RCCEx_I2S_Configuration I2S Configuration
- * @brief Macros to configure clock source of I2S peripherals.
- * @{
- */
-
-/** @brief Macro to configure the I2S2 clock.
- * @param __I2S2CLKSOURCE__ specifies the I2S2 clock source.
- * This parameter can be one of the following values:
- * @arg @ref RCC_I2S2CLKSOURCE_SYSCLK system clock selected as I2S3 clock entry
- * @arg @ref RCC_I2S2CLKSOURCE_PLLI2S_VCO PLLI2S VCO clock selected as I2S3 clock entry
- */
-#define __HAL_RCC_I2S2_CONFIG(__I2S2CLKSOURCE__) \
- MODIFY_REG(RCC->CFGR2, RCC_CFGR2_I2S2SRC, (uint32_t)(__I2S2CLKSOURCE__))
-
-/** @brief Macro to get the I2S2 clock (I2S2CLK).
- * @retval The clock source can be one of the following values:
- * @arg @ref RCC_I2S2CLKSOURCE_SYSCLK system clock selected as I2S3 clock entry
- * @arg @ref RCC_I2S2CLKSOURCE_PLLI2S_VCO PLLI2S VCO clock selected as I2S3 clock entry
- */
-#define __HAL_RCC_GET_I2S2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_I2S2SRC)))
-
-/** @brief Macro to configure the I2S3 clock.
- * @param __I2S2CLKSOURCE__ specifies the I2S3 clock source.
- * This parameter can be one of the following values:
- * @arg @ref RCC_I2S3CLKSOURCE_SYSCLK system clock selected as I2S3 clock entry
- * @arg @ref RCC_I2S3CLKSOURCE_PLLI2S_VCO PLLI2S VCO clock selected as I2S3 clock entry
- */
-#define __HAL_RCC_I2S3_CONFIG(__I2S2CLKSOURCE__) \
- MODIFY_REG(RCC->CFGR2, RCC_CFGR2_I2S3SRC, (uint32_t)(__I2S2CLKSOURCE__))
-
-/** @brief Macro to get the I2S3 clock (I2S3CLK).
- * @retval The clock source can be one of the following values:
- * @arg @ref RCC_I2S3CLKSOURCE_SYSCLK system clock selected as I2S3 clock entry
- * @arg @ref RCC_I2S3CLKSOURCE_PLLI2S_VCO PLLI2S VCO clock selected as I2S3 clock entry
- */
-#define __HAL_RCC_GET_I2S3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_I2S3SRC)))
-
-/**
- * @}
- */
-
-#endif /* STM32F105xC || STM32F107xC */
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup RCCEx_Exported_Functions
- * @{
- */
-
-/** @addtogroup RCCEx_Exported_Functions_Group1
- * @{
- */
-
-HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
-void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
-uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk);
-
-/**
- * @}
- */
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
-/** @addtogroup RCCEx_Exported_Functions_Group2
- * @{
- */
-HAL_StatusTypeDef HAL_RCCEx_EnablePLLI2S(RCC_PLLI2SInitTypeDef *PLLI2SInit);
-HAL_StatusTypeDef HAL_RCCEx_DisablePLLI2S(void);
-
-/**
- * @}
- */
-
-/** @addtogroup RCCEx_Exported_Functions_Group3
- * @{
- */
-HAL_StatusTypeDef HAL_RCCEx_EnablePLL2(RCC_PLL2InitTypeDef *PLL2Init);
-HAL_StatusTypeDef HAL_RCCEx_DisablePLL2(void);
-
-/**
- * @}
- */
-#endif /* STM32F105xC || STM32F107xC */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F1xx_HAL_RCC_EX_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h
deleted file mode 100644
index 7e1c530..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h
+++ /dev/null
@@ -1,1767 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_tim.h
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief Header file of TIM HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F1xx_HAL_TIM_H
-#define __STM32F1xx_HAL_TIM_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal_def.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup TIM
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup TIM_Exported_Types TIM Exported Types
- * @{
- */
-/**
- * @brief TIM Time base Configuration Structure definition
- */
-typedef struct
-{
- uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
- This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
-
- uint32_t CounterMode; /*!< Specifies the counter mode.
- This parameter can be a value of @ref TIM_Counter_Mode */
-
- uint32_t Period; /*!< Specifies the period value to be loaded into the active
- Auto-Reload Register at the next update event.
- This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
-
- uint32_t ClockDivision; /*!< Specifies the clock division.
- This parameter can be a value of @ref TIM_ClockDivision */
-
- uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter
- reaches zero, an update event is generated and counting restarts
- from the RCR value (N).
- This means in PWM mode that (N+1) corresponds to:
- - the number of PWM periods in edge-aligned mode
- - the number of half PWM period in center-aligned mode
- This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.
- @note This parameter is valid only for TIM1 and TIM8. */
-} TIM_Base_InitTypeDef;
-
-/**
- * @brief TIM Output Compare Configuration Structure definition
- */
-typedef struct
-{
- uint32_t OCMode; /*!< Specifies the TIM mode.
- This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
-
- uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
- This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
-
- uint32_t OCPolarity; /*!< Specifies the output polarity.
- This parameter can be a value of @ref TIM_Output_Compare_Polarity */
-
- uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
- This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
- @note This parameter is valid only for TIM1 and TIM8. */
-
- uint32_t OCFastMode; /*!< Specifies the Fast mode state.
- This parameter can be a value of @ref TIM_Output_Fast_State
- @note This parameter is valid only in PWM1 and PWM2 mode. */
-
-
- uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
- This parameter can be a value of @ref TIM_Output_Compare_Idle_State
- @note This parameter is valid only for TIM1 and TIM8. */
-
- uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
- This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
- @note This parameter is valid only for TIM1 and TIM8. */
-} TIM_OC_InitTypeDef;
-
-/**
- * @brief TIM One Pulse Mode Configuration Structure definition
- */
-typedef struct
-{
- uint32_t OCMode; /*!< Specifies the TIM mode.
- This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
-
- uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
- This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
-
- uint32_t OCPolarity; /*!< Specifies the output polarity.
- This parameter can be a value of @ref TIM_Output_Compare_Polarity */
-
- uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
- This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
- @note This parameter is valid only for TIM1 and TIM8. */
-
- uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
- This parameter can be a value of @ref TIM_Output_Compare_Idle_State
- @note This parameter is valid only for TIM1 and TIM8. */
-
- uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
- This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
- @note This parameter is valid only for TIM1 and TIM8. */
-
- uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
- This parameter can be a value of @ref TIM_Input_Capture_Polarity */
-
- uint32_t ICSelection; /*!< Specifies the input.
- This parameter can be a value of @ref TIM_Input_Capture_Selection */
-
- uint32_t ICFilter; /*!< Specifies the input capture filter.
- This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
-} TIM_OnePulse_InitTypeDef;
-
-
-/**
- * @brief TIM Input Capture Configuration Structure definition
- */
-typedef struct
-{
- uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
- This parameter can be a value of @ref TIM_Input_Capture_Polarity */
-
- uint32_t ICSelection; /*!< Specifies the input.
- This parameter can be a value of @ref TIM_Input_Capture_Selection */
-
- uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler.
- This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
-
- uint32_t ICFilter; /*!< Specifies the input capture filter.
- This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
-} TIM_IC_InitTypeDef;
-
-/**
- * @brief TIM Encoder Configuration Structure definition
- */
-typedef struct
-{
- uint32_t EncoderMode; /*!< Specifies the active edge of the input signal.
- This parameter can be a value of @ref TIM_Encoder_Mode */
-
- uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
- This parameter can be a value of @ref TIM_Input_Capture_Polarity */
-
- uint32_t IC1Selection; /*!< Specifies the input.
- This parameter can be a value of @ref TIM_Input_Capture_Selection */
-
- uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
- This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
-
- uint32_t IC1Filter; /*!< Specifies the input capture filter.
- This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
-
- uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal.
- This parameter can be a value of @ref TIM_Input_Capture_Polarity */
-
- uint32_t IC2Selection; /*!< Specifies the input.
- This parameter can be a value of @ref TIM_Input_Capture_Selection */
-
- uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler.
- This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
-
- uint32_t IC2Filter; /*!< Specifies the input capture filter.
- This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
-} TIM_Encoder_InitTypeDef;
-
-
-/**
- * @brief TIM Clock Configuration Handle Structure definition
- */
-typedef struct
-{
- uint32_t ClockSource; /*!< TIM clock sources
- This parameter can be a value of @ref TIM_Clock_Source */
- uint32_t ClockPolarity; /*!< TIM clock polarity
- This parameter can be a value of @ref TIM_Clock_Polarity */
- uint32_t ClockPrescaler; /*!< TIM clock prescaler
- This parameter can be a value of @ref TIM_Clock_Prescaler */
- uint32_t ClockFilter; /*!< TIM clock filter
- This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
-}TIM_ClockConfigTypeDef;
-
-/**
- * @brief TIM Clear Input Configuration Handle Structure definition
- */
-typedef struct
-{
- uint32_t ClearInputState; /*!< TIM clear Input state
- This parameter can be ENABLE or DISABLE */
- uint32_t ClearInputSource; /*!< TIM clear Input sources
- This parameter can be a value of @ref TIM_ClearInput_Source */
- uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity
- This parameter can be a value of @ref TIM_ClearInput_Polarity */
- uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler
- This parameter can be a value of @ref TIM_ClearInput_Prescaler */
- uint32_t ClearInputFilter; /*!< TIM Clear Input filter
- This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
-}TIM_ClearInputConfigTypeDef;
-
-/**
- * @brief TIM Slave configuration Structure definition
- */
-typedef struct {
- uint32_t SlaveMode; /*!< Slave mode selection
- This parameter can be a value of @ref TIM_Slave_Mode */
- uint32_t InputTrigger; /*!< Input Trigger source
- This parameter can be a value of @ref TIM_Trigger_Selection */
- uint32_t TriggerPolarity; /*!< Input Trigger polarity
- This parameter can be a value of @ref TIM_Trigger_Polarity */
- uint32_t TriggerPrescaler; /*!< Input trigger prescaler
- This parameter can be a value of @ref TIM_Trigger_Prescaler */
- uint32_t TriggerFilter; /*!< Input trigger filter
- This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
-
-}TIM_SlaveConfigTypeDef;
-
-/**
- * @brief HAL State structures definition
- */
-typedef enum
-{
- HAL_TIM_STATE_RESET = 0x00, /*!< Peripheral not yet initialized or disabled */
- HAL_TIM_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
- HAL_TIM_STATE_BUSY = 0x02, /*!< An internal process is ongoing */
- HAL_TIM_STATE_TIMEOUT = 0x03, /*!< Timeout state */
- HAL_TIM_STATE_ERROR = 0x04 /*!< Reception process is ongoing */
-}HAL_TIM_StateTypeDef;
-
-/**
- * @brief HAL Active channel structures definition
- */
-typedef enum
-{
- HAL_TIM_ACTIVE_CHANNEL_1 = 0x01, /*!< The active channel is 1 */
- HAL_TIM_ACTIVE_CHANNEL_2 = 0x02, /*!< The active channel is 2 */
- HAL_TIM_ACTIVE_CHANNEL_3 = 0x04, /*!< The active channel is 3 */
- HAL_TIM_ACTIVE_CHANNEL_4 = 0x08, /*!< The active channel is 4 */
- HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00 /*!< All active channels cleared */
-}HAL_TIM_ActiveChannel;
-
-/**
- * @brief TIM Time Base Handle Structure definition
- */
-typedef struct
-{
- TIM_TypeDef *Instance; /*!< Register base address */
- TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */
- HAL_TIM_ActiveChannel Channel; /*!< Active channel */
- DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array
- This array is accessed by a @ref TIM_DMA_Handle_index */
- HAL_LockTypeDef Lock; /*!< Locking object */
- __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */
-}TIM_HandleTypeDef;
-
-/**
- * @}
- */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup TIM_Exported_Constants TIM Exported Constants
- * @{
- */
-
-/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel Polarity
- * @{
- */
-#define TIM_INPUTCHANNELPOLARITY_RISING ((uint32_t)0x00000000) /*!< Polarity for TIx source */
-#define TIM_INPUTCHANNELPOLARITY_FALLING (TIM_CCER_CC1P) /*!< Polarity for TIx source */
-#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */
-/**
- * @}
- */
-
-/** @defgroup TIM_ETR_Polarity TIM ETR Polarity
- * @{
- */
-#define TIM_ETRPOLARITY_INVERTED (TIM_SMCR_ETP) /*!< Polarity for ETR source */
-#define TIM_ETRPOLARITY_NONINVERTED ((uint32_t)0x0000) /*!< Polarity for ETR source */
-/**
- * @}
- */
-
-/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler
- * @{
- */
-#define TIM_ETRPRESCALER_DIV1 ((uint32_t)0x0000) /*!< No prescaler is used */
-#define TIM_ETRPRESCALER_DIV2 (TIM_SMCR_ETPS_0) /*!< ETR input source is divided by 2 */
-#define TIM_ETRPRESCALER_DIV4 (TIM_SMCR_ETPS_1) /*!< ETR input source is divided by 4 */
-#define TIM_ETRPRESCALER_DIV8 (TIM_SMCR_ETPS) /*!< ETR input source is divided by 8 */
-/**
- * @}
- */
-
-/** @defgroup TIM_Counter_Mode TIM Counter Mode
- * @{
- */
-#define TIM_COUNTERMODE_UP ((uint32_t)0x0000)
-#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR
-#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0
-#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1
-#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS
-/**
- * @}
- */
-
-/** @defgroup TIM_ClockDivision TIM ClockDivision
- * @{
- */
-#define TIM_CLOCKDIVISION_DIV1 ((uint32_t)0x0000)
-#define TIM_CLOCKDIVISION_DIV2 (TIM_CR1_CKD_0)
-#define TIM_CLOCKDIVISION_DIV4 (TIM_CR1_CKD_1)
-/**
- * @}
- */
-
-/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM modes
- * @{
- */
-#define TIM_OCMODE_TIMING ((uint32_t)0x0000)
-#define TIM_OCMODE_ACTIVE (TIM_CCMR1_OC1M_0)
-#define TIM_OCMODE_INACTIVE (TIM_CCMR1_OC1M_1)
-#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_1)
-#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2)
-#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M)
-#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2)
-#define TIM_OCMODE_FORCED_INACTIVE (TIM_CCMR1_OC1M_2)
-/**
- * @}
- */
-
-/** @defgroup TIM_Output_Compare_State TIM Output Compare State
- * @{
- */
-#define TIM_OUTPUTSTATE_DISABLE ((uint32_t)0x0000)
-#define TIM_OUTPUTSTATE_ENABLE (TIM_CCER_CC1E)
-/**
- * @}
- */
-
-/** @defgroup TIM_Output_Fast_State TIM Output Fast State
- * @{
- */
-#define TIM_OCFAST_DISABLE ((uint32_t)0x0000)
-#define TIM_OCFAST_ENABLE (TIM_CCMR1_OC1FE)
-/**
- * @}
- */
-
-/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State
- * @{
- */
-#define TIM_OUTPUTNSTATE_DISABLE ((uint32_t)0x0000)
-#define TIM_OUTPUTNSTATE_ENABLE (TIM_CCER_CC1NE)
-/**
- * @}
- */
-
-/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity
- * @{
- */
-#define TIM_OCPOLARITY_HIGH ((uint32_t)0x0000)
-#define TIM_OCPOLARITY_LOW (TIM_CCER_CC1P)
-/**
- * @}
- */
-
-/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity
- * @{
- */
-#define TIM_OCNPOLARITY_HIGH ((uint32_t)0x0000)
-#define TIM_OCNPOLARITY_LOW (TIM_CCER_CC1NP)
-/**
- * @}
- */
-
-/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State
- * @{
- */
-#define TIM_OCIDLESTATE_SET (TIM_CR2_OIS1)
-#define TIM_OCIDLESTATE_RESET ((uint32_t)0x0000)
-/**
- * @}
- */
-
-/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State
- * @{
- */
-#define TIM_OCNIDLESTATE_SET (TIM_CR2_OIS1N)
-#define TIM_OCNIDLESTATE_RESET ((uint32_t)0x0000)
-/**
- * @}
- */
-
-/** @defgroup TIM_Channel TIM Channel
- * @{
- */
-#define TIM_CHANNEL_1 ((uint32_t)0x0000)
-#define TIM_CHANNEL_2 ((uint32_t)0x0004)
-#define TIM_CHANNEL_3 ((uint32_t)0x0008)
-#define TIM_CHANNEL_4 ((uint32_t)0x000C)
-#define TIM_CHANNEL_ALL ((uint32_t)0x0018)
-/**
- * @}
- */
-
-/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity
- * @{
- */
-#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING
-#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING
-#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE
-/**
- * @}
- */
-
-/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection
- * @{
- */
-#define TIM_ICSELECTION_DIRECTTI (TIM_CCMR1_CC1S_0) /*!< TIM Input 1, 2, 3 or 4 is selected to be
- connected to IC1, IC2, IC3 or IC4, respectively */
-#define TIM_ICSELECTION_INDIRECTTI (TIM_CCMR1_CC1S_1) /*!< TIM Input 1, 2, 3 or 4 is selected to be
- connected to IC2, IC1, IC4 or IC3, respectively */
-#define TIM_ICSELECTION_TRC (TIM_CCMR1_CC1S) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */
-/**
- * @}
- */
-
-/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler
- * @{
- */
-#define TIM_ICPSC_DIV1 ((uint32_t)0x0000) /*!< Capture performed each time an edge is detected on the capture input */
-#define TIM_ICPSC_DIV2 (TIM_CCMR1_IC1PSC_0) /*!< Capture performed once every 2 events */
-#define TIM_ICPSC_DIV4 (TIM_CCMR1_IC1PSC_1) /*!< Capture performed once every 4 events */
-#define TIM_ICPSC_DIV8 (TIM_CCMR1_IC1PSC) /*!< Capture performed once every 8 events */
-/**
- * @}
- */
-
-/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode
- * @{
- */
-#define TIM_OPMODE_SINGLE (TIM_CR1_OPM)
-#define TIM_OPMODE_REPETITIVE ((uint32_t)0x0000)
-/**
- * @}
- */
-
-/** @defgroup TIM_Encoder_Mode TIM Encoder Mode
- * @{
- */
-#define TIM_ENCODERMODE_TI1 (TIM_SMCR_SMS_0)
-#define TIM_ENCODERMODE_TI2 (TIM_SMCR_SMS_1)
-#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0)
-/**
- * @}
- */
-
-/** @defgroup TIM_Interrupt_definition TIM Interrupt Definition
- * @{
- */
-#define TIM_IT_UPDATE (TIM_DIER_UIE)
-#define TIM_IT_CC1 (TIM_DIER_CC1IE)
-#define TIM_IT_CC2 (TIM_DIER_CC2IE)
-#define TIM_IT_CC3 (TIM_DIER_CC3IE)
-#define TIM_IT_CC4 (TIM_DIER_CC4IE)
-#define TIM_IT_COM (TIM_DIER_COMIE)
-#define TIM_IT_TRIGGER (TIM_DIER_TIE)
-#define TIM_IT_BREAK (TIM_DIER_BIE)
-/**
- * @}
- */
-
-/** @defgroup TIM_Commutation_Source TIM Commutation Source
- * @{
- */
-#define TIM_COMMUTATION_TRGI (TIM_CR2_CCUS)
-#define TIM_COMMUTATION_SOFTWARE ((uint32_t)0x0000)
-
-/**
- * @}
- */
-
-/** @defgroup TIM_DMA_sources TIM DMA Sources
- * @{
- */
-#define TIM_DMA_UPDATE (TIM_DIER_UDE)
-#define TIM_DMA_CC1 (TIM_DIER_CC1DE)
-#define TIM_DMA_CC2 (TIM_DIER_CC2DE)
-#define TIM_DMA_CC3 (TIM_DIER_CC3DE)
-#define TIM_DMA_CC4 (TIM_DIER_CC4DE)
-#define TIM_DMA_COM (TIM_DIER_COMDE)
-#define TIM_DMA_TRIGGER (TIM_DIER_TDE)
-/**
- * @}
- */
-
-/** @defgroup TIM_Event_Source TIM Event Source
- * @{
- */
-#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG
-#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G
-#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G
-#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G
-#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G
-#define TIM_EVENTSOURCE_COM TIM_EGR_COMG
-#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG
-#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG
-/**
- * @}
- */
-
-/** @defgroup TIM_Flag_definition TIM Flag Definition
- * @{
- */
-#define TIM_FLAG_UPDATE (TIM_SR_UIF)
-#define TIM_FLAG_CC1 (TIM_SR_CC1IF)
-#define TIM_FLAG_CC2 (TIM_SR_CC2IF)
-#define TIM_FLAG_CC3 (TIM_SR_CC3IF)
-#define TIM_FLAG_CC4 (TIM_SR_CC4IF)
-#define TIM_FLAG_COM (TIM_SR_COMIF)
-#define TIM_FLAG_TRIGGER (TIM_SR_TIF)
-#define TIM_FLAG_BREAK (TIM_SR_BIF)
-#define TIM_FLAG_CC1OF (TIM_SR_CC1OF)
-#define TIM_FLAG_CC2OF (TIM_SR_CC2OF)
-#define TIM_FLAG_CC3OF (TIM_SR_CC3OF)
-#define TIM_FLAG_CC4OF (TIM_SR_CC4OF)
-/**
- * @}
- */
-
-/** @defgroup TIM_Clock_Source TIM Clock Source
- * @{
- */
-#define TIM_CLOCKSOURCE_ETRMODE2 (TIM_SMCR_ETPS_1)
-#define TIM_CLOCKSOURCE_INTERNAL (TIM_SMCR_ETPS_0)
-#define TIM_CLOCKSOURCE_ITR0 ((uint32_t)0x0000)
-#define TIM_CLOCKSOURCE_ITR1 (TIM_SMCR_TS_0)
-#define TIM_CLOCKSOURCE_ITR2 (TIM_SMCR_TS_1)
-#define TIM_CLOCKSOURCE_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1)
-#define TIM_CLOCKSOURCE_TI1ED (TIM_SMCR_TS_2)
-#define TIM_CLOCKSOURCE_TI1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2)
-#define TIM_CLOCKSOURCE_TI2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2)
-#define TIM_CLOCKSOURCE_ETRMODE1 (TIM_SMCR_TS)
-/**
- * @}
- */
-
-/** @defgroup TIM_Clock_Polarity TIM Clock Polarity
- * @{
- */
-#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */
-#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */
-#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */
-#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */
-#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */
-/**
- * @}
- */
-
-/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler
- * @{
- */
-#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
-#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */
-#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */
-#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */
-/**
- * @}
- */
-
-/** @defgroup TIM_ClearInput_Source TIM ClearInput Source
- * @{
- */
-#define TIM_CLEARINPUTSOURCE_ETR ((uint32_t)0x0001)
-#define TIM_CLEARINPUTSOURCE_OCREFCLR ((uint32_t)0x0002)
-#define TIM_CLEARINPUTSOURCE_NONE ((uint32_t)0x0000)
-/**
- * @}
- */
-
-/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity
- * @{
- */
-#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */
-#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */
-/**
- * @}
- */
-
-/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler
- * @{
- */
-#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
-#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */
-#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */
-#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */
-/**
- * @}
- */
-
-/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR Off State Selection for Run mode state
- * @{
- */
-#define TIM_OSSR_ENABLE (TIM_BDTR_OSSR)
-#define TIM_OSSR_DISABLE ((uint32_t)0x0000)
-/**
- * @}
- */
-
-/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI Off State Selection for Idle mode state
- * @{
- */
-#define TIM_OSSI_ENABLE (TIM_BDTR_OSSI)
-#define TIM_OSSI_DISABLE ((uint32_t)0x0000)
-/**
- * @}
- */
-
-/** @defgroup TIM_Lock_level TIM Lock level
- * @{
- */
-#define TIM_LOCKLEVEL_OFF ((uint32_t)0x0000)
-#define TIM_LOCKLEVEL_1 (TIM_BDTR_LOCK_0)
-#define TIM_LOCKLEVEL_2 (TIM_BDTR_LOCK_1)
-#define TIM_LOCKLEVEL_3 (TIM_BDTR_LOCK)
-/**
- * @}
- */
-
-/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable Disable
- * @{
- */
-#define TIM_BREAK_ENABLE (TIM_BDTR_BKE)
-#define TIM_BREAK_DISABLE ((uint32_t)0x0000)
-/**
- * @}
- */
-
-/** @defgroup TIM_Break_Polarity TIM Break Input Polarity
- * @{
- */
-#define TIM_BREAKPOLARITY_LOW ((uint32_t)0x0000)
-#define TIM_BREAKPOLARITY_HIGH (TIM_BDTR_BKP)
-/**
- * @}
- */
-/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable
- * @{
- */
-#define TIM_AUTOMATICOUTPUT_ENABLE (TIM_BDTR_AOE)
-#define TIM_AUTOMATICOUTPUT_DISABLE ((uint32_t)0x0000)
-/**
- * @}
- */
-
-/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection
- * @{
- */
-#define TIM_TRGO_RESET ((uint32_t)0x0000)
-#define TIM_TRGO_ENABLE (TIM_CR2_MMS_0)
-#define TIM_TRGO_UPDATE (TIM_CR2_MMS_1)
-#define TIM_TRGO_OC1 ((TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
-#define TIM_TRGO_OC1REF (TIM_CR2_MMS_2)
-#define TIM_TRGO_OC2REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_0))
-#define TIM_TRGO_OC3REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1))
-#define TIM_TRGO_OC4REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
-/**
- * @}
- */
-
-/** @defgroup TIM_Slave_Mode TIM Slave Mode
- * @{
- */
-#define TIM_SLAVEMODE_DISABLE ((uint32_t)0x0000)
-#define TIM_SLAVEMODE_RESET ((uint32_t)0x0004)
-#define TIM_SLAVEMODE_GATED ((uint32_t)0x0005)
-#define TIM_SLAVEMODE_TRIGGER ((uint32_t)0x0006)
-#define TIM_SLAVEMODE_EXTERNAL1 ((uint32_t)0x0007)
-/**
- * @}
- */
-
-/** @defgroup TIM_Master_Slave_Mode TIM Master Slave Mode
- * @{
- */
-#define TIM_MASTERSLAVEMODE_ENABLE ((uint32_t)0x0080)
-#define TIM_MASTERSLAVEMODE_DISABLE ((uint32_t)0x0000)
-/**
- * @}
- */
-
-/** @defgroup TIM_Trigger_Selection TIM Trigger Selection
- * @{
- */
-#define TIM_TS_ITR0 ((uint32_t)0x0000)
-#define TIM_TS_ITR1 ((uint32_t)0x0010)
-#define TIM_TS_ITR2 ((uint32_t)0x0020)
-#define TIM_TS_ITR3 ((uint32_t)0x0030)
-#define TIM_TS_TI1F_ED ((uint32_t)0x0040)
-#define TIM_TS_TI1FP1 ((uint32_t)0x0050)
-#define TIM_TS_TI2FP2 ((uint32_t)0x0060)
-#define TIM_TS_ETRF ((uint32_t)0x0070)
-#define TIM_TS_NONE ((uint32_t)0xFFFF)
-/**
- * @}
- */
-
-/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity
- * @{
- */
-#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */
-#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */
-#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
-#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
-#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */
-/**
- * @}
- */
-
-/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler
- * @{
- */
-#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
-#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */
-#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */
-#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */
-/**
- * @}
- */
-
-/** @defgroup TIM_TI1_Selection TIM TI1 Input Selection
- * @{
- */
-#define TIM_TI1SELECTION_CH1 ((uint32_t)0x0000)
-#define TIM_TI1SELECTION_XORCOMBINATION (TIM_CR2_TI1S)
-/**
- * @}
- */
-
-/** @defgroup TIM_DMA_Base_address TIM DMA Base Address
- * @{
- */
-#define TIM_DMABASE_CR1 (0x00000000)
-#define TIM_DMABASE_CR2 (0x00000001)
-#define TIM_DMABASE_SMCR (0x00000002)
-#define TIM_DMABASE_DIER (0x00000003)
-#define TIM_DMABASE_SR (0x00000004)
-#define TIM_DMABASE_EGR (0x00000005)
-#define TIM_DMABASE_CCMR1 (0x00000006)
-#define TIM_DMABASE_CCMR2 (0x00000007)
-#define TIM_DMABASE_CCER (0x00000008)
-#define TIM_DMABASE_CNT (0x00000009)
-#define TIM_DMABASE_PSC (0x0000000A)
-#define TIM_DMABASE_ARR (0x0000000B)
-#define TIM_DMABASE_RCR (0x0000000C)
-#define TIM_DMABASE_CCR1 (0x0000000D)
-#define TIM_DMABASE_CCR2 (0x0000000E)
-#define TIM_DMABASE_CCR3 (0x0000000F)
-#define TIM_DMABASE_CCR4 (0x00000010)
-#define TIM_DMABASE_BDTR (0x00000011)
-#define TIM_DMABASE_DCR (0x00000012)
-/**
- * @}
- */
-
-/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length
- * @{
- */
-#define TIM_DMABURSTLENGTH_1TRANSFER (0x00000000)
-#define TIM_DMABURSTLENGTH_2TRANSFERS (0x00000100)
-#define TIM_DMABURSTLENGTH_3TRANSFERS (0x00000200)
-#define TIM_DMABURSTLENGTH_4TRANSFERS (0x00000300)
-#define TIM_DMABURSTLENGTH_5TRANSFERS (0x00000400)
-#define TIM_DMABURSTLENGTH_6TRANSFERS (0x00000500)
-#define TIM_DMABURSTLENGTH_7TRANSFERS (0x00000600)
-#define TIM_DMABURSTLENGTH_8TRANSFERS (0x00000700)
-#define TIM_DMABURSTLENGTH_9TRANSFERS (0x00000800)
-#define TIM_DMABURSTLENGTH_10TRANSFERS (0x00000900)
-#define TIM_DMABURSTLENGTH_11TRANSFERS (0x00000A00)
-#define TIM_DMABURSTLENGTH_12TRANSFERS (0x00000B00)
-#define TIM_DMABURSTLENGTH_13TRANSFERS (0x00000C00)
-#define TIM_DMABURSTLENGTH_14TRANSFERS (0x00000D00)
-#define TIM_DMABURSTLENGTH_15TRANSFERS (0x00000E00)
-#define TIM_DMABURSTLENGTH_16TRANSFERS (0x00000F00)
-#define TIM_DMABURSTLENGTH_17TRANSFERS (0x00001000)
-#define TIM_DMABURSTLENGTH_18TRANSFERS (0x00001100)
-/**
- * @}
- */
-
-/** @defgroup TIM_DMA_Handle_index TIM DMA Handle Index
- * @{
- */
-#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0) /*!< Index of the DMA handle used for Update DMA requests */
-#define TIM_DMA_ID_CC1 ((uint16_t) 0x1) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */
-#define TIM_DMA_ID_CC2 ((uint16_t) 0x2) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */
-#define TIM_DMA_ID_CC3 ((uint16_t) 0x3) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */
-#define TIM_DMA_ID_CC4 ((uint16_t) 0x4) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */
-#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x5) /*!< Index of the DMA handle used for Commutation DMA requests */
-#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x6) /*!< Index of the DMA handle used for Trigger DMA requests */
-/**
- * @}
- */
-
-/** @defgroup TIM_Channel_CC_State TIM Capture/Compare Channel State
- * @{
- */
-#define TIM_CCx_ENABLE ((uint32_t)0x0001)
-#define TIM_CCx_DISABLE ((uint32_t)0x0000)
-#define TIM_CCxN_ENABLE ((uint32_t)0x0004)
-#define TIM_CCxN_DISABLE ((uint32_t)0x0000)
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Private Constants -----------------------------------------------------------*/
-/** @defgroup TIM_Private_Constants TIM Private Constants
- * @{
- */
-
-/* The counter of a timer instance is disabled only if all the CCx and CCxN
- channels have been disabled */
-#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E))
-#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE))
-
-/**
- * @}
- */
-
-/* Private Macros -----------------------------------------------------------*/
-/** @defgroup TIM_Private_Macros TIM Private Macros
- * @{
- */
-
-#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_COUNTERMODE_UP) || \
- ((MODE) == TIM_COUNTERMODE_DOWN) || \
- ((MODE) == TIM_COUNTERMODE_CENTERALIGNED1) || \
- ((MODE) == TIM_COUNTERMODE_CENTERALIGNED2) || \
- ((MODE) == TIM_COUNTERMODE_CENTERALIGNED3))
-
-#define IS_TIM_CLOCKDIVISION_DIV(DIV) (((DIV) == TIM_CLOCKDIVISION_DIV1) || \
- ((DIV) == TIM_CLOCKDIVISION_DIV2) || \
- ((DIV) == TIM_CLOCKDIVISION_DIV4))
-
-#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \
- ((MODE) == TIM_OCMODE_PWM2))
-
-#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING) || \
- ((MODE) == TIM_OCMODE_ACTIVE) || \
- ((MODE) == TIM_OCMODE_INACTIVE) || \
- ((MODE) == TIM_OCMODE_TOGGLE) || \
- ((MODE) == TIM_OCMODE_FORCED_ACTIVE) || \
- ((MODE) == TIM_OCMODE_FORCED_INACTIVE))
-
-#define IS_TIM_FAST_STATE(STATE) (((STATE) == TIM_OCFAST_DISABLE) || \
- ((STATE) == TIM_OCFAST_ENABLE))
-
-#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPOLARITY_HIGH) || \
- ((POLARITY) == TIM_OCPOLARITY_LOW))
-
-#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPOLARITY_HIGH) || \
- ((POLARITY) == TIM_OCNPOLARITY_LOW))
-
-#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIDLESTATE_SET) || \
- ((STATE) == TIM_OCIDLESTATE_RESET))
-
-#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIDLESTATE_SET) || \
- ((STATE) == TIM_OCNIDLESTATE_RESET))
-
-#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
- ((CHANNEL) == TIM_CHANNEL_2) || \
- ((CHANNEL) == TIM_CHANNEL_3) || \
- ((CHANNEL) == TIM_CHANNEL_4) || \
- ((CHANNEL) == TIM_CHANNEL_ALL))
-
-#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
- ((CHANNEL) == TIM_CHANNEL_2))
-
-#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
- ((CHANNEL) == TIM_CHANNEL_2) || \
- ((CHANNEL) == TIM_CHANNEL_3))
-
-#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPOLARITY_RISING) || \
- ((POLARITY) == TIM_ICPOLARITY_FALLING) || \
- ((POLARITY) == TIM_ICPOLARITY_BOTHEDGE))
-
-#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSELECTION_DIRECTTI) || \
- ((SELECTION) == TIM_ICSELECTION_INDIRECTTI) || \
- ((SELECTION) == TIM_ICSELECTION_TRC))
-
-#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \
- ((PRESCALER) == TIM_ICPSC_DIV2) || \
- ((PRESCALER) == TIM_ICPSC_DIV4) || \
- ((PRESCALER) == TIM_ICPSC_DIV8))
-
-#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMODE_SINGLE) || \
- ((MODE) == TIM_OPMODE_REPETITIVE))
-
-#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_ENCODERMODE_TI1) || \
- ((MODE) == TIM_ENCODERMODE_TI2) || \
- ((MODE) == TIM_ENCODERMODE_TI12))
-
-#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & 0xFFFF80FF) == 0x00000000) && ((SOURCE) != 0x00000000))
-
-#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & 0xFFFFFF00) == 0x00000000) && ((SOURCE) != 0x00000000))
-
-#define IS_TIM_CLOCKSOURCE(CLOCK) (((CLOCK) == TIM_CLOCKSOURCE_INTERNAL) || \
- ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE2) || \
- ((CLOCK) == TIM_CLOCKSOURCE_ITR0) || \
- ((CLOCK) == TIM_CLOCKSOURCE_ITR1) || \
- ((CLOCK) == TIM_CLOCKSOURCE_ITR2) || \
- ((CLOCK) == TIM_CLOCKSOURCE_ITR3) || \
- ((CLOCK) == TIM_CLOCKSOURCE_TI1ED) || \
- ((CLOCK) == TIM_CLOCKSOURCE_TI1) || \
- ((CLOCK) == TIM_CLOCKSOURCE_TI2) || \
- ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE1))
-
-#define IS_TIM_CLOCKPOLARITY(POLARITY) (((POLARITY) == TIM_CLOCKPOLARITY_INVERTED) || \
- ((POLARITY) == TIM_CLOCKPOLARITY_NONINVERTED) || \
- ((POLARITY) == TIM_CLOCKPOLARITY_RISING) || \
- ((POLARITY) == TIM_CLOCKPOLARITY_FALLING) || \
- ((POLARITY) == TIM_CLOCKPOLARITY_BOTHEDGE))
-
-#define IS_TIM_CLOCKPRESCALER(PRESCALER) (((PRESCALER) == TIM_CLOCKPRESCALER_DIV1) || \
- ((PRESCALER) == TIM_CLOCKPRESCALER_DIV2) || \
- ((PRESCALER) == TIM_CLOCKPRESCALER_DIV4) || \
- ((PRESCALER) == TIM_CLOCKPRESCALER_DIV8))
-
-#define IS_TIM_CLOCKFILTER(ICFILTER) ((ICFILTER) <= 0xF)
-
-#define IS_TIM_CLEARINPUT_SOURCE(SOURCE) (((SOURCE) == TIM_CLEARINPUTSOURCE_ETR) || \
- ((SOURCE) == TIM_CLEARINPUTSOURCE_OCREFCLR) || \
- ((SOURCE) == TIM_CLEARINPUTSOURCE_NONE))
-
-#define IS_TIM_CLEARINPUT_POLARITY(POLARITY) (((POLARITY) == TIM_CLEARINPUTPOLARITY_INVERTED) || \
- ((POLARITY) == TIM_CLEARINPUTPOLARITY_NONINVERTED))
-
-#define IS_TIM_CLEARINPUT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV1) || \
- ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV2) || \
- ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV4) || \
- ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV8))
-
-#define IS_TIM_CLEARINPUT_FILTER(ICFILTER) ((ICFILTER) <= 0xF)
-
-#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSR_ENABLE) || \
- ((STATE) == TIM_OSSR_DISABLE))
-
-#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSI_ENABLE) || \
- ((STATE) == TIM_OSSI_DISABLE))
-
-#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLEVEL_OFF) || \
- ((LEVEL) == TIM_LOCKLEVEL_1) || \
- ((LEVEL) == TIM_LOCKLEVEL_2) || \
- ((LEVEL) == TIM_LOCKLEVEL_3))
-
-#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_BREAK_ENABLE) || \
- ((STATE) == TIM_BREAK_DISABLE))
-
-#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BREAKPOLARITY_LOW) || \
- ((POLARITY) == TIM_BREAKPOLARITY_HIGH))
-
-#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AUTOMATICOUTPUT_ENABLE) || \
- ((STATE) == TIM_AUTOMATICOUTPUT_DISABLE))
-
-#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO_RESET) || \
- ((SOURCE) == TIM_TRGO_ENABLE) || \
- ((SOURCE) == TIM_TRGO_UPDATE) || \
- ((SOURCE) == TIM_TRGO_OC1) || \
- ((SOURCE) == TIM_TRGO_OC1REF) || \
- ((SOURCE) == TIM_TRGO_OC2REF) || \
- ((SOURCE) == TIM_TRGO_OC3REF) || \
- ((SOURCE) == TIM_TRGO_OC4REF))
-
-#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \
- ((MODE) == TIM_SLAVEMODE_GATED) || \
- ((MODE) == TIM_SLAVEMODE_RESET) || \
- ((MODE) == TIM_SLAVEMODE_TRIGGER) || \
- ((MODE) == TIM_SLAVEMODE_EXTERNAL1))
-
-#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MASTERSLAVEMODE_ENABLE) || \
- ((STATE) == TIM_MASTERSLAVEMODE_DISABLE))
-
-#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
- ((SELECTION) == TIM_TS_ITR1) || \
- ((SELECTION) == TIM_TS_ITR2) || \
- ((SELECTION) == TIM_TS_ITR3) || \
- ((SELECTION) == TIM_TS_TI1F_ED) || \
- ((SELECTION) == TIM_TS_TI1FP1) || \
- ((SELECTION) == TIM_TS_TI2FP2) || \
- ((SELECTION) == TIM_TS_ETRF))
-
-#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
- ((SELECTION) == TIM_TS_ITR1) || \
- ((SELECTION) == TIM_TS_ITR2) || \
- ((SELECTION) == TIM_TS_ITR3) || \
- ((SELECTION) == TIM_TS_NONE))
-
-#define IS_TIM_TRIGGERPOLARITY(POLARITY) (((POLARITY) == TIM_TRIGGERPOLARITY_INVERTED ) || \
- ((POLARITY) == TIM_TRIGGERPOLARITY_NONINVERTED) || \
- ((POLARITY) == TIM_TRIGGERPOLARITY_RISING ) || \
- ((POLARITY) == TIM_TRIGGERPOLARITY_FALLING ) || \
- ((POLARITY) == TIM_TRIGGERPOLARITY_BOTHEDGE ))
-
-#define IS_TIM_TRIGGERPRESCALER(PRESCALER) (((PRESCALER) == TIM_TRIGGERPRESCALER_DIV1) || \
- ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV2) || \
- ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV4) || \
- ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV8))
-
-#define IS_TIM_TRIGGERFILTER(ICFILTER) ((ICFILTER) <= 0xF)
-
-#define IS_TIM_TI1SELECTION(TI1SELECTION) (((TI1SELECTION) == TIM_TI1SELECTION_CH1) || \
- ((TI1SELECTION) == TIM_TI1SELECTION_XORCOMBINATION))
-
-#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABASE_CR1) || \
- ((BASE) == TIM_DMABASE_CR2) || \
- ((BASE) == TIM_DMABASE_SMCR) || \
- ((BASE) == TIM_DMABASE_DIER) || \
- ((BASE) == TIM_DMABASE_SR) || \
- ((BASE) == TIM_DMABASE_EGR) || \
- ((BASE) == TIM_DMABASE_CCMR1) || \
- ((BASE) == TIM_DMABASE_CCMR2) || \
- ((BASE) == TIM_DMABASE_CCER) || \
- ((BASE) == TIM_DMABASE_CNT) || \
- ((BASE) == TIM_DMABASE_PSC) || \
- ((BASE) == TIM_DMABASE_ARR) || \
- ((BASE) == TIM_DMABASE_RCR) || \
- ((BASE) == TIM_DMABASE_CCR1) || \
- ((BASE) == TIM_DMABASE_CCR2) || \
- ((BASE) == TIM_DMABASE_CCR3) || \
- ((BASE) == TIM_DMABASE_CCR4) || \
- ((BASE) == TIM_DMABASE_BDTR) || \
- ((BASE) == TIM_DMABASE_DCR))
-
-#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABURSTLENGTH_1TRANSFER) || \
- ((LENGTH) == TIM_DMABURSTLENGTH_2TRANSFERS) || \
- ((LENGTH) == TIM_DMABURSTLENGTH_3TRANSFERS) || \
- ((LENGTH) == TIM_DMABURSTLENGTH_4TRANSFERS) || \
- ((LENGTH) == TIM_DMABURSTLENGTH_5TRANSFERS) || \
- ((LENGTH) == TIM_DMABURSTLENGTH_6TRANSFERS) || \
- ((LENGTH) == TIM_DMABURSTLENGTH_7TRANSFERS) || \
- ((LENGTH) == TIM_DMABURSTLENGTH_8TRANSFERS) || \
- ((LENGTH) == TIM_DMABURSTLENGTH_9TRANSFERS) || \
- ((LENGTH) == TIM_DMABURSTLENGTH_10TRANSFERS) || \
- ((LENGTH) == TIM_DMABURSTLENGTH_11TRANSFERS) || \
- ((LENGTH) == TIM_DMABURSTLENGTH_12TRANSFERS) || \
- ((LENGTH) == TIM_DMABURSTLENGTH_13TRANSFERS) || \
- ((LENGTH) == TIM_DMABURSTLENGTH_14TRANSFERS) || \
- ((LENGTH) == TIM_DMABURSTLENGTH_15TRANSFERS) || \
- ((LENGTH) == TIM_DMABURSTLENGTH_16TRANSFERS) || \
- ((LENGTH) == TIM_DMABURSTLENGTH_17TRANSFERS) || \
- ((LENGTH) == TIM_DMABURSTLENGTH_18TRANSFERS))
-
-#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF)
-
-/** @brief Set TIM IC prescaler
- * @param __HANDLE__: TIM handle
- * @param __CHANNEL__: specifies TIM Channel
- * @param __ICPSC__: specifies the prescaler value.
- * @retval None
- */
-#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \
-(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\
- ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8)) :\
- ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\
- ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8)))
-
-/** @brief Reset TIM IC prescaler
- * @param __HANDLE__: TIM handle
- * @param __CHANNEL__: specifies TIM Channel
- * @retval None
- */
-#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \
-(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\
- ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\
- ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\
- ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC))
-
-
-/** @brief Set TIM IC polarity
- * @param __HANDLE__: TIM handle
- * @param __CHANNEL__: specifies TIM Channel
- * @param __POLARITY__: specifies TIM Channel Polarity
- * @retval None
- */
-#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
-(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\
- ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4)) :\
- ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8)) :\
- ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12) & TIM_CCER_CC4P)))
-
-/** @brief Reset TIM IC polarity
- * @param __HANDLE__: TIM handle
- * @param __CHANNEL__: specifies TIM Channel
- * @retval None
- */
-#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \
-(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\
- ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\
- ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\
- ((__HANDLE__)->Instance->CCER &= (uint16_t)~TIM_CCER_CC4P))
-
-/**
- * @}
- */
-
-/* Private Functions --------------------------------------------------------*/
-/** @addtogroup TIM_Private_Functions
- * @{
- */
-void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure);
-void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
-void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
-void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma);
-void TIM_DMAError(DMA_HandleTypeDef *hdma);
-void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma);
-void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState);
-/**
- * @}
- */
-
-/* Exported macros -----------------------------------------------------------*/
-/** @defgroup TIM_Exported_Macros TIM Exported Macros
- * @{
- */
-
-/** @brief Reset TIM handle state
- * @param __HANDLE__: TIM handle.
- * @retval None
- */
-#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET)
-
-/**
- * @brief Enable the TIM peripheral.
- * @param __HANDLE__: TIM handle
- * @retval None
- */
-#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN))
-
-/**
- * @brief Enable the TIM main Output.
- * @param __HANDLE__: TIM handle
- * @retval None
- */
-#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE))
-
-/**
- * @brief Disable the TIM peripheral.
- * @param __HANDLE__: TIM handle
- * @retval None
- */
-#define __HAL_TIM_DISABLE(__HANDLE__) \
- do { \
- if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0) \
- { \
- if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0) \
- { \
- (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \
- } \
- } \
- } while(0)
-/* The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN
- channels have been disabled */
-/**
- * @brief Disable the TIM main Output.
- * @param __HANDLE__: TIM handle
- * @retval None
- * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been disabled
- */
-#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \
- do { \
- if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0) \
- { \
- if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0) \
- { \
- (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \
- } \
- } \
- } while(0)
-
-/**
- * @brief Enables the specified TIM interrupt.
- * @param __HANDLE__: specifies the TIM Handle.
- * @param __INTERRUPT__: specifies the TIM interrupt source to enable.
- * This parameter can be one of the following values:
- * @arg TIM_IT_UPDATE: Update interrupt
- * @arg TIM_IT_CC1: Capture/Compare 1 interrupt
- * @arg TIM_IT_CC2: Capture/Compare 2 interrupt
- * @arg TIM_IT_CC3: Capture/Compare 3 interrupt
- * @arg TIM_IT_CC4: Capture/Compare 4 interrupt
- * @arg TIM_IT_COM: Commutation interrupt
- * @arg TIM_IT_TRIGGER: Trigger interrupt
- * @arg TIM_IT_BREAK: Break interrupt
- * @retval None
- */
-#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__))
-
-/**
- * @brief Disables the specified TIM interrupt.
- * @param __HANDLE__: specifies the TIM Handle.
- * @param __INTERRUPT__: specifies the TIM interrupt source to disable.
- * This parameter can be one of the following values:
- * @arg TIM_IT_UPDATE: Update interrupt
- * @arg TIM_IT_CC1: Capture/Compare 1 interrupt
- * @arg TIM_IT_CC2: Capture/Compare 2 interrupt
- * @arg TIM_IT_CC3: Capture/Compare 3 interrupt
- * @arg TIM_IT_CC4: Capture/Compare 4 interrupt
- * @arg TIM_IT_COM: Commutation interrupt
- * @arg TIM_IT_TRIGGER: Trigger interrupt
- * @arg TIM_IT_BREAK: Break interrupt
- * @retval None
- */
-#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__))
-
-/**
- * @brief Enables the specified DMA request.
- * @param __HANDLE__: specifies the TIM Handle.
- * @param __DMA__: specifies the TIM DMA request to enable.
- * This parameter can be one of the following values:
- * @arg TIM_DMA_UPDATE: Update DMA request
- * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request
- * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request
- * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request
- * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request
- * @arg TIM_DMA_COM: Commutation DMA request
- * @arg TIM_DMA_TRIGGER: Trigger DMA request
- * @retval None
- */
-#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__))
-
-/**
- * @brief Disables the specified DMA request.
- * @param __HANDLE__: specifies the TIM Handle.
- * @param __DMA__: specifies the TIM DMA request to disable.
- * This parameter can be one of the following values:
- * @arg TIM_DMA_UPDATE: Update DMA request
- * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request
- * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request
- * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request
- * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request
- * @arg TIM_DMA_COM: Commutation DMA request
- * @arg TIM_DMA_TRIGGER: Trigger DMA request
- * @retval None
- */
-#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__))
-
-/**
- * @brief Checks whether the specified TIM interrupt flag is set or not.
- * @param __HANDLE__: specifies the TIM Handle.
- * @param __FLAG__: specifies the TIM interrupt flag to check.
- * This parameter can be one of the following values:
- * @arg TIM_FLAG_UPDATE: Update interrupt flag
- * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag
- * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag
- * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag
- * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag
- * @arg TIM_FLAG_COM: Commutation interrupt flag
- * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag
- * @arg TIM_FLAG_BREAK: Break interrupt flag
- * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag
- * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag
- * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag
- * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag
- * @retval The new state of __FLAG__ (TRUE or FALSE).
- */
-#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__))
-
-/**
- * @brief Clears the specified TIM interrupt flag.
- * @param __HANDLE__: specifies the TIM Handle.
- * @param __FLAG__: specifies the TIM interrupt flag to clear.
- * This parameter can be one of the following values:
- * @arg TIM_FLAG_UPDATE: Update interrupt flag
- * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag
- * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag
- * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag
- * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag
- * @arg TIM_FLAG_COM: Commutation interrupt flag
- * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag
- * @arg TIM_FLAG_BREAK: Break interrupt flag
- * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag
- * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag
- * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag
- * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag
- * @retval The new state of __FLAG__ (TRUE or FALSE).
- */
-#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
-
-/**
- * @brief Checks whether the specified TIM interrupt has occurred or not.
- * @param __HANDLE__: TIM handle
- * @param __INTERRUPT__: specifies the TIM interrupt source to check.
- * @retval The state of TIM_IT (SET or RESET).
- */
-#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
-
-/**
- * @brief Clear the TIM interrupt pending bits
- * @param __HANDLE__: TIM handle
- * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
- * @retval None
- */
-#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
-
-/**
- * @brief Indicates whether or not the TIM Counter is used as downcounter
- * @param __HANDLE__: TIM handle.
- * @retval False (Counter used as upcounter) or True (Counter used as downcounter)
- * @note This macro is particularly usefull to get the counting mode when the timer operates in Center-aligned mode or Encoder
-mode.
- */
-#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 & (TIM_CR1_DIR)) == (TIM_CR1_DIR))
-
-/**
- * @brief Sets the TIM active prescaler register value on update event.
- * @param __HANDLE__: TIM handle.
- * @param __PRESC__: specifies the active prescaler register new value.
- * @retval None
- */
-#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__))
-
-/**
- * @brief Sets the TIM Capture Compare Register value on runtime without
- * calling another time ConfigChannel function.
- * @param __HANDLE__: TIM handle.
- * @param __CHANNEL__ : TIM Channels to be configured.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @param __COMPARE__: specifies the Capture Compare register new value.
- * @retval None
- */
-#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \
-(*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2)) = (__COMPARE__))
-
-/**
- * @brief Gets the TIM Capture Compare Register value on runtime
- * @param __HANDLE__: TIM handle.
- * @param __CHANNEL__ : TIM Channel associated with the capture compare register
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: get capture/compare 1 register value
- * @arg TIM_CHANNEL_2: get capture/compare 2 register value
- * @arg TIM_CHANNEL_3: get capture/compare 3 register value
- * @arg TIM_CHANNEL_4: get capture/compare 4 register value
- * @retval None
- */
-#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \
- (*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2)))
-
-/**
- * @brief Sets the TIM Counter Register value on runtime.
- * @param __HANDLE__: TIM handle.
- * @param __COUNTER__: specifies the Counter register new value.
- * @retval None
- */
-#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__))
-
-/**
- * @brief Gets the TIM Counter Register value on runtime.
- * @param __HANDLE__: TIM handle.
- * @retval None
- */
-#define __HAL_TIM_GET_COUNTER(__HANDLE__) \
- ((__HANDLE__)->Instance->CNT)
-
-/**
- * @brief Sets the TIM Autoreload Register value on runtime without calling
- * another time any Init function.
- * @param __HANDLE__: TIM handle.
- * @param __AUTORELOAD__: specifies the Counter register new value.
- * @retval None
- */
-#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \
- do{ \
- (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \
- (__HANDLE__)->Init.Period = (__AUTORELOAD__); \
- } while(0)
-
-/**
- * @brief Gets the TIM Autoreload Register value on runtime
- * @param __HANDLE__: TIM handle.
- * @retval None
- */
-#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) \
- ((__HANDLE__)->Instance->ARR)
-
-/**
- * @brief Sets the TIM Clock Division value on runtime without calling
- * another time any Init function.
- * @param __HANDLE__: TIM handle.
- * @param __CKD__: specifies the clock division value.
- * This parameter can be one of the following value:
- * @arg TIM_CLOCKDIVISION_DIV1
- * @arg TIM_CLOCKDIVISION_DIV2
- * @arg TIM_CLOCKDIVISION_DIV4
- * @retval None
- */
-#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \
- do{ \
- (__HANDLE__)->Instance->CR1 &= (uint16_t)(~TIM_CR1_CKD); \
- (__HANDLE__)->Instance->CR1 |= (__CKD__); \
- (__HANDLE__)->Init.ClockDivision = (__CKD__); \
- } while(0)
-
-/**
- * @brief Gets the TIM Clock Division value on runtime
- * @param __HANDLE__: TIM handle.
- * @retval None
- */
-#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) \
- ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
-
-/**
- * @brief Sets the TIM Input Capture prescaler on runtime without calling
- * another time HAL_TIM_IC_ConfigChannel() function.
- * @param __HANDLE__: TIM handle.
- * @param __CHANNEL__ : TIM Channels to be configured.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @param __ICPSC__: specifies the Input Capture4 prescaler new value.
- * This parameter can be one of the following values:
- * @arg TIM_ICPSC_DIV1: no prescaler
- * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
- * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
- * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
- * @retval None
- */
-#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \
- do{ \
- TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \
- TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \
- } while(0)
-
-/**
- * @brief Gets the TIM Input Capture prescaler on runtime
- * @param __HANDLE__: TIM handle.
- * @param __CHANNEL__: TIM Channels to be configured.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: get input capture 1 prescaler value
- * @arg TIM_CHANNEL_2: get input capture 2 prescaler value
- * @arg TIM_CHANNEL_3: get input capture 3 prescaler value
- * @arg TIM_CHANNEL_4: get input capture 4 prescaler value
- * @retval None
- */
-#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \
- (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\
- ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8) :\
- ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\
- (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8)
-
-/**
- * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register
- * @param __HANDLE__: TIM handle.
- * @note When the USR bit of the TIMx_CR1 register is set, only counter
- * overflow/underflow generates an update interrupt or DMA request (if
- * enabled)
- * @retval None
- */
-#define __HAL_TIM_URS_ENABLE(__HANDLE__) \
- ((__HANDLE__)->Instance->CR1|= (TIM_CR1_URS))
-
-/**
- * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register
- * @param __HANDLE__: TIM handle.
- * @note When the USR bit of the TIMx_CR1 register is reset, any of the
- * following events generate an update interrupt or DMA request (if
- * enabled):
- * (+) Counter overflow/underflow
- * (+) Setting the UG bit
- * (+) Update generation through the slave mode controller
- * @retval None
- */
-#define __HAL_TIM_URS_DISABLE(__HANDLE__) \
- ((__HANDLE__)->Instance->CR1&=~(TIM_CR1_URS))
-
-/**
- * @brief Sets the TIM Capture x input polarity on runtime.
- * @param __HANDLE__: TIM handle.
- * @param __CHANNEL__: TIM Channels to be configured.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @param __POLARITY__: Polarity for TIx source
- * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge
- * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge
- * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge
- * @note The polarity TIM_INPUTCHANNELPOLARITY_BOTHEDGE is not authorized for TIM Channel 4.
- * @retval None
- */
-#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
- do{ \
- TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \
- TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \
- }while(0)
-
-/**
- * @}
- */
-
-/* Include TIM HAL Extension module */
-#include "stm32f1xx_hal_tim_ex.h"
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup TIM_Exported_Functions
- * @{
- */
-
-/** @addtogroup TIM_Exported_Functions_Group1
- * @{
- */
-/* Time Base functions ********************************************************/
-HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim);
-HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim);
-void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim);
-void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim);
-/* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim);
-HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim);
-/* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim);
-HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim);
-/* Non-Blocking mode: DMA */
-HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
-HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim);
-/**
- * @}
- */
-
-/** @addtogroup TIM_Exported_Functions_Group2
- * @{
- */
-/* Timer Output Compare functions **********************************************/
-HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim);
-HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim);
-void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim);
-void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim);
-/* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
-/* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
-/* Non-Blocking mode: DMA */
-HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
-HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
-
-/**
- * @}
- */
-
-/** @addtogroup TIM_Exported_Functions_Group3
- * @{
- */
-/* Timer PWM functions *********************************************************/
-HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim);
-HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim);
-void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim);
-void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim);
-/* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
-/* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
-/* Non-Blocking mode: DMA */
-HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
-HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
-/**
- * @}
- */
-
-/** @addtogroup TIM_Exported_Functions_Group4
- * @{
- */
-/* Timer Input Capture functions ***********************************************/
-HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim);
-HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim);
-void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim);
-void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim);
-/* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
-/* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
-/* Non-Blocking mode: DMA */
-HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
-HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
-/**
- * @}
- */
-
-/** @addtogroup TIM_Exported_Functions_Group5
- * @{
- */
-/* Timer One Pulse functions ***************************************************/
-HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode);
-HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim);
-void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim);
-void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim);
-/* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
-HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
-/* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
-HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
-/**
- * @}
- */
-
-/** @addtogroup TIM_Exported_Functions_Group6
- * @{
- */
-/* Timer Encoder functions *****************************************************/
-HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig);
-HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim);
-void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim);
-void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim);
- /* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
-/* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
-/* Non-Blocking mode: DMA */
-HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length);
-HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
-
-/**
- * @}
- */
-
-/** @addtogroup TIM_Exported_Functions_Group7
- * @{
- */
-/* Interrupt Handler functions **********************************************/
-void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim);
-/**
- * @}
- */
-
-/** @addtogroup TIM_Exported_Functions_Group8
- * @{
- */
-/* Control functions *********************************************************/
-HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel);
-HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig);
-HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection);
-HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
-HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
-HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
- uint32_t *BurstBuffer, uint32_t BurstLength);
-HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
-HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
- uint32_t *BurstBuffer, uint32_t BurstLength);
-HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
-HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
-uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);
-
-/**
- * @}
- */
-
-/** @addtogroup TIM_Exported_Functions_Group9
- * @{
- */
-/* Callback in non blocking modes (Interrupt and DMA) *************************/
-void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim);
-void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim);
-void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim);
-void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim);
-void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim);
-void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim);
-/**
- * @}
- */
-
-/** @addtogroup TIM_Exported_Functions_Group10
- * @{
- */
-/* Peripheral State functions **************************************************/
-HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim);
-HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim);
-HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim);
-HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim);
-HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim);
-HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim);
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F1xx_HAL_TIM_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h
deleted file mode 100644
index b6410ac..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h
+++ /dev/null
@@ -1,312 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_tim_ex.h
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief Header file of TIM HAL Extension module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F1xx_HAL_TIM_EX_H
-#define __STM32F1xx_HAL_TIM_EX_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal_def.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup TIMEx
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup TIMEx_Exported_Types TIMEx Exported Types
- * @{
- */
-
-
-/**
- * @brief TIM Hall sensor Configuration Structure definition
- */
-
-typedef struct
-{
-
- uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
- This parameter can be a value of @ref TIM_Input_Capture_Polarity */
-
- uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
- This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
-
- uint32_t IC1Filter; /*!< Specifies the input capture filter.
- This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
- uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
- This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
-} TIM_HallSensor_InitTypeDef;
-
-
-#if defined (STM32F100xB) || defined (STM32F100xE) || \
- defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F103xE) || defined (STM32F103xG) || \
- defined (STM32F105xC) || defined (STM32F107xC)
-
-/**
- * @brief TIM Break and Dead time configuration Structure definition
- */
-typedef struct
-{
- uint32_t OffStateRunMode; /*!< TIM off state in run mode
- This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
- uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode
- This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
- uint32_t LockLevel; /*!< TIM Lock level
- This parameter can be a value of @ref TIM_Lock_level */
- uint32_t DeadTime; /*!< TIM dead Time
- This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
- uint32_t BreakState; /*!< TIM Break State
- This parameter can be a value of @ref TIM_Break_Input_enable_disable */
- uint32_t BreakPolarity; /*!< TIM Break input polarity
- This parameter can be a value of @ref TIM_Break_Polarity */
- uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state
- This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
-} TIM_BreakDeadTimeConfigTypeDef;
-
-#endif /* defined(STM32F100xB) || defined(STM32F100xE) || */
- /* defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || */
- /* defined(STM32F105xC) || defined(STM32F107xC) */
-
-/**
- * @brief TIM Master configuration Structure definition
- */
-typedef struct {
- uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection
- This parameter can be a value of @ref TIM_Master_Mode_Selection */
- uint32_t MasterSlaveMode; /*!< Master/slave mode selection
- This parameter can be a value of @ref TIM_Master_Slave_Mode */
-}TIM_MasterConfigTypeDef;
-
-/**
- * @}
- */
-
-/* Exported constants --------------------------------------------------------*/
-#if defined (STM32F100xB) || defined (STM32F100xE) || \
- defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F103xE) || defined (STM32F103xG) || \
- defined (STM32F105xC) || defined (STM32F107xC)
-/** @defgroup TIMEx_Exported_Constants TIMEx Exported Constants
- * @{
- */
-
-/** @defgroup TIMEx_Clock_Filter TIMEx Clock Filter
- * @{
- */
-#define IS_TIM_DEADTIME(DEADTIME) ((DEADTIME) <= 0xFF) /*!< BreakDead Time */
-/**
- * @}
- */
-
-/**
- * @}
- */
-#endif /* defined(STM32F100xB) || defined(STM32F100xE) || */
- /* defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || */
- /* defined(STM32F105xC) || defined(STM32F107xC) */
-
-/* Exported macro ------------------------------------------------------------*/
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup TIMEx_Exported_Functions
- * @{
- */
-
-/** @addtogroup TIMEx_Exported_Functions_Group1
- * @{
- */
-/* Timer Hall Sensor functions **********************************************/
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig);
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);
-
-void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
-void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);
-
- /* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
-/* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
-/* Non-Blocking mode: DMA */
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
-/**
- * @}
- */
-
-#if defined (STM32F100xB) || defined (STM32F100xE) || \
- defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F103xE) || defined (STM32F103xG) || \
- defined (STM32F105xC) || defined (STM32F107xC)
-
-/** @addtogroup TIMEx_Exported_Functions_Group2
- * @{
- */
-/* Timer Complementary Output Compare functions *****************************/
-/* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
-
-/* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
-
-/* Non-Blocking mode: DMA */
-HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
-HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
-/**
- * @}
- */
-
-/** @addtogroup TIMEx_Exported_Functions_Group3
- * @{
- */
-/* Timer Complementary PWM functions ****************************************/
-/* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
-
-/* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
-HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
-/* Non-Blocking mode: DMA */
-HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
-HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
-/**
- * @}
- */
-
-/** @addtogroup TIMEx_Exported_Functions_Group4
- * @{
- */
-/* Timer Complementary One Pulse functions **********************************/
-/* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
-HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
-
-/* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
-HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
-/**
- * @}
- */
-#endif /* defined(STM32F100xB) || defined(STM32F100xE) || */
- /* defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || */
- /* defined(STM32F105xC) || defined(STM32F107xC) */
-
-/** @addtogroup TIMEx_Exported_Functions_Group5
- * @{
- */
-/* Extended Control functions ************************************************/
-#if defined (STM32F100xB) || defined (STM32F100xE) || \
- defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F103xE) || defined (STM32F103xG) || \
- defined (STM32F105xC) || defined (STM32F107xC)
-HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
-HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
-HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
-HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
-#endif /* defined(STM32F100xB) || defined(STM32F100xE) || */
- /* defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || */
- /* defined(STM32F105xC) || defined(STM32F107xC) */
-HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig);
-/**
- * @}
- */
-
-/** @addtogroup TIMEx_Exported_Functions_Group6
- * @{
- */
-/* Extension Callback *********************************************************/
-void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim);
-void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
-/**
- * @}
- */
-
-#if defined (STM32F100xB) || defined (STM32F100xE) || \
- defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F103xE) || defined (STM32F103xG) || \
- defined (STM32F105xC) || defined (STM32F107xC)
-/** @addtogroup TIMEx_Exported_Functions_Group7
- * @{
- */
-/* Extension Peripheral State functions **************************************/
-HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
-/**
- * @}
- */
-#endif /* defined(STM32F100xB) || defined(STM32F100xE) || */
- /* defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || */
- /* defined(STM32F105xC) || defined(STM32F107xC) */
-
-/**
- * @}
- */
-/* End of exported functions -------------------------------------------------*/
-
-/* Private functions----------------------------------------------------------*/
-/** @defgroup TIMEx_Private_Functions TIMEx Private Functions
-* @{
-*/
-void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
-/**
-* @}
-*/
-/* End of private functions --------------------------------------------------*/
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* __STM32F1xx_HAL_TIM_EX_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h
deleted file mode 100644
index 976756c..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h
+++ /dev/null
@@ -1,751 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_uart.h
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief Header file of UART HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F1xx_HAL_UART_H
-#define __STM32F1xx_HAL_UART_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal_def.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup UART
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup UART_Exported_Types UART Exported Types
- * @{
- */
-
-
-/**
- * @brief UART Init Structure definition
- */
-typedef struct
-{
- uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
- The baud rate is computed using the following formula:
- - IntegerDivider = ((PCLKx) / (16 * (huart->Init.BaudRate)))
- - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 16) + 0.5 */
-
- uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
- This parameter can be a value of @ref UART_Word_Length */
-
- uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
- This parameter can be a value of @ref UART_Stop_Bits */
-
- uint32_t Parity; /*!< Specifies the parity mode.
- This parameter can be a value of @ref UART_Parity
- @note When parity is enabled, the computed parity is inserted
- at the MSB position of the transmitted data (9th bit when
- the word length is set to 9 data bits; 8th bit when the
- word length is set to 8 data bits). */
-
- uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
- This parameter can be a value of @ref UART_Mode */
-
- uint32_t HwFlowCtl; /*!< Specifies wether the hardware flow control mode is enabled
- or disabled.
- This parameter can be a value of @ref UART_Hardware_Flow_Control */
-
- uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
- This parameter can be a value of @ref UART_Over_Sampling. This feature is not available
- on STM32F1xx family, so OverSampling parameter should always be set to 16. */
-}UART_InitTypeDef;
-
-/**
- * @brief HAL UART State structures definition
- */
-typedef enum
-{
- HAL_UART_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
- HAL_UART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
- HAL_UART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
- HAL_UART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
- HAL_UART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
- HAL_UART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
- HAL_UART_STATE_TIMEOUT = 0x03, /*!< Timeout state */
- HAL_UART_STATE_ERROR = 0x04 /*!< Error */
-}HAL_UART_StateTypeDef;
-
-
-/**
- * @brief UART handle Structure definition
- */
-typedef struct
-{
- USART_TypeDef *Instance; /*!< UART registers base address */
-
- UART_InitTypeDef Init; /*!< UART communication parameters */
-
- uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */
-
- uint16_t TxXferSize; /*!< UART Tx Transfer size */
-
- uint16_t TxXferCount; /*!< UART Tx Transfer Counter */
-
- uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */
-
- uint16_t RxXferSize; /*!< UART Rx Transfer size */
-
- uint16_t RxXferCount; /*!< UART Rx Transfer Counter */
-
- DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */
-
- DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */
-
- HAL_LockTypeDef Lock; /*!< Locking object */
-
- __IO HAL_UART_StateTypeDef State; /*!< UART communication state */
-
- __IO uint32_t ErrorCode; /*!< UART Error code */
-
-}UART_HandleTypeDef;
-
-/**
- * @}
- */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup UART_Exported_Constants UART Exported constants
- * @{
- */
-
-/** @defgroup UART_Error_Codes UART Error Codes
- * @{
- */
-
-#define HAL_UART_ERROR_NONE ((uint32_t)0x00) /*!< No error */
-#define HAL_UART_ERROR_PE ((uint32_t)0x01) /*!< Parity error */
-#define HAL_UART_ERROR_NE ((uint32_t)0x02) /*!< Noise error */
-#define HAL_UART_ERROR_FE ((uint32_t)0x04) /*!< frame error */
-#define HAL_UART_ERROR_ORE ((uint32_t)0x08) /*!< Overrun error */
-#define HAL_UART_ERROR_DMA ((uint32_t)0x10) /*!< DMA transfer error */
-
-/**
- * @}
- */
-
-
-
-
-/** @defgroup UART_Word_Length UART Word Length
- * @{
- */
-#define UART_WORDLENGTH_8B ((uint32_t)0x00000000)
-#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
-/**
- * @}
- */
-
-/** @defgroup UART_Stop_Bits UART Number of Stop Bits
- * @{
- */
-#define UART_STOPBITS_1 ((uint32_t)0x00000000)
-#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
-/**
- * @}
- */
-
-/** @defgroup UART_Parity UART Parity
- * @{
- */
-#define UART_PARITY_NONE ((uint32_t)0x00000000)
-#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
-#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
-/**
- * @}
- */
-
-/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
- * @{
- */
-#define UART_HWCONTROL_NONE ((uint32_t)0x00000000)
-#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE)
-#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE)
-#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE))
-/**
- * @}
- */
-
-/** @defgroup UART_Mode UART Transfer Mode
- * @{
- */
-#define UART_MODE_RX ((uint32_t)USART_CR1_RE)
-#define UART_MODE_TX ((uint32_t)USART_CR1_TE)
-#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
-
-/**
- * @}
- */
-
- /** @defgroup UART_State UART State
- * @{
- */
-#define UART_STATE_DISABLE ((uint32_t)0x00000000)
-#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE)
-/**
- * @}
- */
-
-/** @defgroup UART_Over_Sampling UART Over Sampling
- * @{
- */
-#define UART_OVERSAMPLING_16 ((uint32_t)0x00000000)
-/**
- * @}
- */
-
-/** @defgroup UART_LIN_Break_Detection_Length UART LIN Break Detection Length
- * @{
- */
-#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000)
-#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL)
-/**
- * @}
- */
-
-/** @defgroup UART_WakeUp_functions UART Wakeup Functions
- * @{
- */
-#define UART_WAKEUPMETHOD_IDLELINE ((uint32_t)0x00000000)
-#define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)USART_CR1_WAKE)
-/**
- * @}
- */
-
-/** @defgroup UART_Flags UART FLags
- * Elements values convention: 0xXXXX
- * - 0xXXXX : Flag mask in the SR register
- * @{
- */
-#define UART_FLAG_CTS ((uint32_t)USART_SR_CTS)
-#define UART_FLAG_LBD ((uint32_t)USART_SR_LBD)
-#define UART_FLAG_TXE ((uint32_t)USART_SR_TXE)
-#define UART_FLAG_TC ((uint32_t)USART_SR_TC)
-#define UART_FLAG_RXNE ((uint32_t)USART_SR_RXNE)
-#define UART_FLAG_IDLE ((uint32_t)USART_SR_IDLE)
-#define UART_FLAG_ORE ((uint32_t)USART_SR_ORE)
-#define UART_FLAG_NE ((uint32_t)USART_SR_NE)
-#define UART_FLAG_FE ((uint32_t)USART_SR_FE)
-#define UART_FLAG_PE ((uint32_t)USART_SR_PE)
-/**
- * @}
- */
-
-/** @defgroup UART_Interrupt_definition UART Interrupt Definitions
- * Elements values convention: 0xY000XXXX
- * - XXXX : Interrupt mask (16 bits) in the Y register
- * - Y : Interrupt source register (2bits)
- * - 0001: CR1 register
- * - 0010: CR2 register
- * - 0011: CR3 register
- *
- * @{
- */
-
-#define UART_IT_PE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_PEIE))
-#define UART_IT_TXE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_TXEIE))
-#define UART_IT_TC ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_TCIE))
-#define UART_IT_RXNE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_RXNEIE))
-#define UART_IT_IDLE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_IDLEIE))
-
-#define UART_IT_LBD ((uint32_t)(UART_CR2_REG_INDEX << 28 | USART_CR2_LBDIE))
-
-#define UART_IT_CTS ((uint32_t)(UART_CR3_REG_INDEX << 28 | USART_CR3_CTSIE))
-#define UART_IT_ERR ((uint32_t)(UART_CR3_REG_INDEX << 28 | USART_CR3_EIE))
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup UART_Exported_Macros UART Exported Macros
- * @{
- */
-
-
-/** @brief Reset UART handle state
- * @param __HANDLE__: specifies the UART Handle.
- * UART Handle selects the USARTx or UARTy peripheral
- * (USART,UART availability and x,y values depending on device).
- * @retval None
- */
-#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_UART_STATE_RESET)
-
-/** @brief Flush the UART DR register
- * @param __HANDLE__: specifies the UART Handle.
- * UART Handle selects the USARTx or UARTy peripheral
- * (USART,UART availability and x,y values depending on device).
- */
-#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
-
-/** @brief Check whether the specified UART flag is set or not.
- * @param __HANDLE__: specifies the UART Handle.
- * UART Handle selects the USARTx or UARTy peripheral
- * (USART,UART availability and x,y values depending on device).
- * @param __FLAG__: specifies the flag to check.
- * This parameter can be one of the following values:
- * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
- * @arg UART_FLAG_LBD: LIN Break detection flag
- * @arg UART_FLAG_TXE: Transmit data register empty flag
- * @arg UART_FLAG_TC: Transmission Complete flag
- * @arg UART_FLAG_RXNE: Receive data register not empty flag
- * @arg UART_FLAG_IDLE: Idle Line detection flag
- * @arg UART_FLAG_ORE: OverRun Error flag
- * @arg UART_FLAG_NE: Noise Error flag
- * @arg UART_FLAG_FE: Framing Error flag
- * @arg UART_FLAG_PE: Parity Error flag
- * @retval The new state of __FLAG__ (TRUE or FALSE).
- */
-#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
-
-/** @brief Clear the specified UART pending flag.
- * @param __HANDLE__: specifies the UART Handle.
- * UART Handle selects the USARTx or UARTy peripheral
- * (USART,UART availability and x,y values depending on device).
- * @param __FLAG__: specifies the flag to check.
- * This parameter can be any combination of the following values:
- * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5).
- * @arg UART_FLAG_LBD: LIN Break detection flag.
- * @arg UART_FLAG_TC: Transmission Complete flag.
- * @arg UART_FLAG_RXNE: Receive data register not empty flag.
- *
- * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun
- * error) and IDLE (Idle line detected) flags are cleared by software
- * sequence: a read operation to USART_SR register followed by a read
- * operation to USART_DR register.
- * @note RXNE flag can be also cleared by a read to the USART_DR register.
- * @note TC flag can be also cleared by software sequence: a read operation to
- * USART_SR register followed by a write operation to USART_DR register.
- * @note TXE flag is cleared only by a write to the USART_DR register.
- *
- * @retval None
- */
-#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
-
-/** @brief Clear the UART PE pending flag.
- * @param __HANDLE__: specifies the UART Handle.
- * UART Handle selects the USARTx or UARTy peripheral
- * (USART,UART availability and x,y values depending on device).
- * @retval None
- */
-#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) \
-do{ \
- __IO uint32_t tmpreg; \
- tmpreg = (__HANDLE__)->Instance->SR; \
- tmpreg = (__HANDLE__)->Instance->DR; \
- UNUSED(tmpreg); \
-}while(0)
-
-
-
-/** @brief Clear the UART FE pending flag.
- * @param __HANDLE__: specifies the UART Handle.
- * UART Handle selects the USARTx or UARTy peripheral
- * (USART,UART availability and x,y values depending on device).
- * @retval None
- */
-#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
-
-/** @brief Clear the UART NE pending flag.
- * @param __HANDLE__: specifies the UART Handle.
- * UART Handle selects the USARTx or UARTy peripheral
- * (USART,UART availability and x,y values depending on device).
- * @retval None
- */
-#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
-
-/** @brief Clear the UART ORE pending flag.
- * @param __HANDLE__: specifies the UART Handle.
- * UART Handle selects the USARTx or UARTy peripheral
- * (USART,UART availability and x,y values depending on device).
- * @retval None
- */
-#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
-
-/** @brief Clear the UART IDLE pending flag.
- * @param __HANDLE__: specifies the UART Handle.
- * UART Handle selects the USARTx or UARTy peripheral
- * (USART,UART availability and x,y values depending on device).
- * @retval None
- */
-#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
-
-/** @brief Enable the specified UART interrupt.
- * @param __HANDLE__: specifies the UART Handle.
- * UART Handle selects the USARTx or UARTy peripheral
- * (USART,UART availability and x,y values depending on device).
- * @param __INTERRUPT__: specifies the UART interrupt source to enable.
- * This parameter can be one of the following values:
- * @arg UART_IT_CTS: CTS change interrupt
- * @arg UART_IT_LBD: LIN Break detection interrupt
- * @arg UART_IT_TXE: Transmit Data Register empty interrupt
- * @arg UART_IT_TC: Transmission complete interrupt
- * @arg UART_IT_RXNE: Receive Data register not empty interrupt
- * @arg UART_IT_IDLE: Idle line detection interrupt
- * @arg UART_IT_PE: Parity Error interrupt
- * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
- * @retval None
- */
-#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == UART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & UART_IT_MASK)): \
- (((__INTERRUPT__) >> 28) == UART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & UART_IT_MASK)): \
- ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & UART_IT_MASK)))
-
-
-/** @brief Disable the specified UART interrupt.
- * @param __HANDLE__: specifies the UART Handle.
- * UART Handle selects the USARTx or UARTy peripheral
- * (USART,UART availability and x,y values depending on device).
- * @param __INTERRUPT__: specifies the UART interrupt source to disable.
- * This parameter can be one of the following values:
- * @arg UART_IT_CTS: CTS change interrupt
- * @arg UART_IT_LBD: LIN Break detection interrupt
- * @arg UART_IT_TXE: Transmit Data Register empty interrupt
- * @arg UART_IT_TC: Transmission complete interrupt
- * @arg UART_IT_RXNE: Receive Data register not empty interrupt
- * @arg UART_IT_IDLE: Idle line detection interrupt
- * @arg UART_IT_PE: Parity Error interrupt
- * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
- * @retval None
- */
-#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == UART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
- (((__INTERRUPT__) >> 28) == UART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
- ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & UART_IT_MASK)))
-
-/** @brief Check whether the specified UART interrupt has occurred or not.
- * @param __HANDLE__: specifies the UART Handle.
- * UART Handle selects the USARTx or UARTy peripheral
- * (USART,UART availability and x,y values depending on device).
- * @param __IT__: specifies the UART interrupt source to check.
- * This parameter can be one of the following values:
- * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
- * @arg UART_IT_LBD: LIN Break detection interrupt
- * @arg UART_IT_TXE: Transmit Data Register empty interrupt
- * @arg UART_IT_TC: Transmission complete interrupt
- * @arg UART_IT_RXNE: Receive Data register not empty interrupt
- * @arg UART_IT_IDLE: Idle line detection interrupt
- * @arg UART_IT_ERR: Error interrupt
- * @retval The new state of __IT__ (TRUE or FALSE).
- */
-#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == UART_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28) == UART_CR2_REG_INDEX)? \
- (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK))
-
-/** @brief Enable CTS flow control
- * This macro allows to enable CTS hardware flow control for a given UART instance,
- * without need to call HAL_UART_Init() function.
- * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
- * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
- * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
- * - UART instance should have already been initialised (through call of HAL_UART_Init() )
- * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
- * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
- * @param __HANDLE__: specifies the UART Handle.
- * This parameter can be any USARTx (supporting the HW Flow control feature).
- * It is used to select the USART peripheral (USART availability and x value depending on device).
- * @retval None
- */
-#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \
- do{ \
- SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
- (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \
- } while(0)
-
-/** @brief Disable CTS flow control
- * This macro allows to disable CTS hardware flow control for a given UART instance,
- * without need to call HAL_UART_Init() function.
- * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
- * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
- * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
- * - UART instance should have already been initialised (through call of HAL_UART_Init() )
- * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
- * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
- * @param __HANDLE__: specifies the UART Handle.
- * This parameter can be any USARTx (supporting the HW Flow control feature).
- * It is used to select the USART peripheral (USART availability and x value depending on device).
- * @retval None
- */
-#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \
- do{ \
- CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
- (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \
- } while(0)
-
-/** @brief Enable RTS flow control
- * This macro allows to enable RTS hardware flow control for a given UART instance,
- * without need to call HAL_UART_Init() function.
- * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
- * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
- * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
- * - UART instance should have already been initialised (through call of HAL_UART_Init() )
- * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
- * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
- * @param __HANDLE__: specifies the UART Handle.
- * This parameter can be any USARTx (supporting the HW Flow control feature).
- * It is used to select the USART peripheral (USART availability and x value depending on device).
- * @retval None
- */
-#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \
- do{ \
- SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
- (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \
- } while(0)
-
-/** @brief Disable RTS flow control
- * This macro allows to disable RTS hardware flow control for a given UART instance,
- * without need to call HAL_UART_Init() function.
- * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
- * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
- * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
- * - UART instance should have already been initialised (through call of HAL_UART_Init() )
- * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
- * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
- * @param __HANDLE__: specifies the UART Handle.
- * This parameter can be any USARTx (supporting the HW Flow control feature).
- * It is used to select the USART peripheral (USART availability and x value depending on device).
- * @retval None
- */
-#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \
- do{ \
- CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
- (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \
- } while(0)
-
-
-/** @brief Enable UART
- * @param __HANDLE__: specifies the UART Handle.
- * UART Handle selects the USARTx or UARTy peripheral
- * (USART,UART availability and x,y values depending on device).
- * @retval None
- */
-#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
-
-/** @brief Disable UART
- * UART Handle selects the USARTx or UARTy peripheral
- * (USART,UART availability and x,y values depending on device).
- * @retval None
- */
-#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
-
-/**
- * @}
- */
-
-
-/* Private macros --------------------------------------------------------*/
-/** @defgroup UART_Private_Macros UART Private Macros
- * @{
- */
-
-#define UART_CR1_REG_INDEX 1
-#define UART_CR2_REG_INDEX 2
-#define UART_CR3_REG_INDEX 3
-
-#define UART_DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_)*25)/(4*(_BAUD_)))
-#define UART_DIVMANT_SAMPLING16(_PCLK_, _BAUD_) (UART_DIV_SAMPLING16((_PCLK_), (_BAUD_))/100)
-#define UART_DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100)
-/* UART BRR = mantissa + overflow + fraction
- = (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0F) */
-#define UART_BRR_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4) + \
- (UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0xF0)) + \
- (UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0x0F))
-#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
- ((LENGTH) == UART_WORDLENGTH_9B))
-#define IS_UART_LIN_WORD_LENGTH(LENGTH) ((LENGTH) == UART_WORDLENGTH_8B)
-
-#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
- ((STOPBITS) == UART_STOPBITS_2))
-
-#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \
- ((PARITY) == UART_PARITY_EVEN) || \
- ((PARITY) == UART_PARITY_ODD))
-
-#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
- (((CONTROL) == UART_HWCONTROL_NONE) || \
- ((CONTROL) == UART_HWCONTROL_RTS) || \
- ((CONTROL) == UART_HWCONTROL_CTS) || \
- ((CONTROL) == UART_HWCONTROL_RTS_CTS))
-
-#define IS_UART_MODE(MODE) ((((MODE) & (~((uint32_t)UART_MODE_TX_RX))) == 0x00) && \
- ((MODE) != (uint32_t)0x00000000))
-
-#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \
- ((STATE) == UART_STATE_ENABLE))
-
-#define IS_UART_OVERSAMPLING(SAMPLING) ((SAMPLING) == UART_OVERSAMPLING_16)
-#define IS_UART_LIN_OVERSAMPLING(SAMPLING) ((SAMPLING) == UART_OVERSAMPLING_16)
-
-#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
- ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
-
-#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \
- ((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK))
-
-
-/** Check UART Baud rate
- * __BAUDRATE__: Baudrate specified by the user
- * The maximum Baud Rate is derived from the maximum clock on APB (i.e. 72 MHz)
- * divided by the smallest oversampling used on the USART (i.e. 16)
- * Retrun : TRUE or FALSE
- */
-#define IS_UART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 4500001)
-
-/** Check UART Node Address
- * __ADDRESS__: UART Node address specified by the user
- * UART Node address is used in Multi processor communication for wakeup
- * with address mark detection.
- * This parameter must be a number between Min_Data = 0 and Max_Data = 15
- * Return : TRUE or FALSE
- */
-#define IS_UART_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0xF)
-
-/** UART interruptions flag mask
- */
-#define UART_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \
- USART_CR1_IDLEIE | USART_CR2_LBDIE | USART_CR3_CTSIE | USART_CR3_EIE )
-
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-
-/** @addtogroup UART_Exported_Functions UART Exported Functions
- * @{
- */
-
-/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions
- * @{
- */
-
-/* Initialization and de-initialization functions ****************************/
-HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
-HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
-HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
-HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
-HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart);
-void HAL_UART_MspInit(UART_HandleTypeDef *huart);
-void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
-
-/**
- * @}
- */
-
-/** @addtogroup UART_Exported_Functions_Group2 IO operation functions
- * @{
- */
-
-/* IO operation functions *****************************************************/
-HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
-HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
-HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
-void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
-void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
-void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
-void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
-void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
-void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
-
-/**
- * @}
- */
-
-/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions
- * @{
- */
-
-/* Peripheral Control functions ************************************************/
-HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
-HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
-HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart);
-HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
-HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
-
-/**
- * @}
- */
-
-/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Errors functions
- * @{
- */
-
-/* Peripheral State and Errors functions **************************************************/
-HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
-uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F1xx_HAL_UART_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h
deleted file mode 100644
index 3579c3d..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h
+++ /dev/null
@@ -1,616 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_ll_usb.h
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief Header file of USB Low Layer HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F1xx_LL_USB_H
-#define __STM32F1xx_LL_USB_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#if defined(STM32F102x6) || defined(STM32F102xB) || \
- defined(STM32F103x6) || defined(STM32F103xB) || \
- defined(STM32F103xE) || defined(STM32F103xG) || \
- defined(STM32F105xC) || defined(STM32F107xC)
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal_def.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup USB_LL
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup USB_LL_Exported_Types USB Low Layer Exported Types
- * @{
- */
-/**
- * @brief USB Mode definition
- */
-typedef enum
-{
- USB_DEVICE_MODE = 0,
- USB_HOST_MODE = 1,
- USB_DRD_MODE = 2
-}USB_ModeTypeDef;
-
-#if defined (USB_OTG_FS)
-/**
- * @brief URB States definition
- */
-typedef enum {
- URB_IDLE = 0,
- URB_DONE,
- URB_NOTREADY,
- URB_NYET,
- URB_ERROR,
- URB_STALL
-}USB_OTG_URBStateTypeDef;
-
-/**
- * @brief Host channel States definition
- */
-typedef enum {
- HC_IDLE = 0,
- HC_XFRC,
- HC_HALTED,
- HC_NAK,
- HC_NYET,
- HC_STALL,
- HC_XACTERR,
- HC_BBLERR,
- HC_DATATGLERR
-}USB_OTG_HCStateTypeDef;
-
-/**
- * @brief USB OTG Initialization Structure definition
- */
-typedef struct
-{
- uint32_t dev_endpoints; /*!< Device Endpoints number.
- This parameter depends on the used USB core.
- This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
-
- uint32_t Host_channels; /*!< Host Channels number.
- This parameter Depends on the used USB core.
- This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
-
- uint32_t speed; /*!< USB Core speed.
- This parameter can be any value of @ref USB_Core_Speed_ */
-
- uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size.
- This parameter can be any value of @ref USB_EP0_MPS_ */
-
- uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */
-
- uint32_t low_power_enable; /*!< Enable or disable the low power mode. */
-
- uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */
-
- uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */
-}USB_OTG_CfgTypeDef;
-
-typedef struct
-{
- uint8_t num; /*!< Endpoint number
- This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
-
- uint8_t is_in; /*!< Endpoint direction
- This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
-
- uint8_t is_stall; /*!< Endpoint stall condition
- This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
-
- uint8_t type; /*!< Endpoint type
- This parameter can be any value of @ref USB_EP_Type_ */
-
- uint8_t data_pid_start; /*!< Initial data PID
- This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
-
- uint8_t even_odd_frame; /*!< IFrame parity
- This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
-
- uint16_t tx_fifo_num; /*!< Transmission FIFO number
- This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
-
- uint32_t maxpacket; /*!< Endpoint Max packet size
- This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
-
- uint8_t *xfer_buff; /*!< Pointer to transfer buffer */
-
- uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */
-
- uint32_t xfer_len; /*!< Current transfer length */
-
- uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */
-}USB_OTG_EPTypeDef;
-
-typedef struct
-{
- uint8_t dev_addr ; /*!< USB device address.
- This parameter must be a number between Min_Data = 1 and Max_Data = 255 */
-
- uint8_t ch_num; /*!< Host channel number.
- This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
-
- uint8_t ep_num; /*!< Endpoint number.
- This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
-
- uint8_t ep_is_in; /*!< Endpoint direction
- This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
-
- uint8_t speed; /*!< USB Host speed.
- This parameter can be any value of @ref USB_Core_Speed_ */
-
- uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */
-
- uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */
-
- uint8_t ep_type; /*!< Endpoint Type.
- This parameter can be any value of @ref USB_EP_Type_ */
-
- uint16_t max_packet; /*!< Endpoint Max packet size.
- This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
-
- uint8_t data_pid; /*!< Initial data PID.
- This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
-
- uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */
-
- uint32_t xfer_len; /*!< Current transfer length. */
-
- uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */
-
- uint8_t toggle_in; /*!< IN transfer current toggle flag.
- This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
-
- uint8_t toggle_out; /*!< OUT transfer current toggle flag
- This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
-
- uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */
-
- uint32_t ErrCnt; /*!< Host channel error count.*/
-
- USB_OTG_URBStateTypeDef urb_state; /*!< URB state.
- This parameter can be any value of @ref USB_OTG_URBStateTypeDef */
-
- USB_OTG_HCStateTypeDef state; /*!< Host Channel state.
- This parameter can be any value of @ref USB_OTG_HCStateTypeDef */
-}USB_OTG_HCTypeDef;
-#endif /* USB_OTG_FS */
-
-#if defined (USB)
-/**
- * @brief USB Initialization Structure definition
- */
-typedef struct
-{
- uint32_t dev_endpoints; /*!< Device Endpoints number.
- This parameter depends on the used USB core.
- This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
-
- uint32_t speed; /*!< USB Core speed.
- This parameter can be any value of @ref USB_Core_Speed */
-
- uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size.
- This parameter can be any value of @ref USB_EP0_MPS */
-
- uint32_t phy_itface; /*!< Select the used PHY interface.
- This parameter can be any value of @ref USB_Core_PHY */
-
- uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */
-
- uint32_t low_power_enable; /*!< Enable or disable Low Power mode */
-
- uint32_t lpm_enable; /*!< Enable or disable Battery charging. */
-
- uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */
-} USB_CfgTypeDef;
-
-typedef struct
-{
- uint8_t num; /*!< Endpoint number
- This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
-
- uint8_t is_in; /*!< Endpoint direction
- This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
-
- uint8_t is_stall; /*!< Endpoint stall condition
- This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
-
- uint8_t type; /*!< Endpoint type
- This parameter can be any value of @ref USB_EP_Type */
-
- uint16_t pmaadress; /*!< PMA Address
- This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
-
- uint16_t pmaaddr0; /*!< PMA Address0
- This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
-
- uint16_t pmaaddr1; /*!< PMA Address1
- This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
-
- uint8_t doublebuffer; /*!< Double buffer enable
- This parameter can be 0 or 1 */
-
- uint16_t tx_fifo_num; /*!< This parameter is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral
- This parameter is added to ensure compatibility across USB peripherals */
-
- uint32_t maxpacket; /*!< Endpoint Max packet size
- This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
-
- uint8_t *xfer_buff; /*!< Pointer to transfer buffer */
-
- uint32_t xfer_len; /*!< Current transfer length */
-
- uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */
-
-} USB_EPTypeDef;
-#endif /* USB */
-/**
- * @}
- */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup USB_LL_Exported_Constants USB Low Layer Exported Constants
- * @{
- */
-#if defined (USB_OTG_FS)
-/** @defgroup USB_LL_Core_Mode USB Low Layer Core Mode
- * @{
- */
-#define USB_OTG_MODE_DEVICE 0
-#define USB_OTG_MODE_HOST 1
-#define USB_OTG_MODE_DRD 2
-/**
- * @}
- */
-
-/** @defgroup USB_LL_Core_Speed USB Low Layer Core Speed
- * @{
- */
-#define USB_OTG_SPEED_LOW 2
-#define USB_OTG_SPEED_FULL 3
-
-/**
- * @}
- */
-
-/** @defgroup USB_LL_Core_PHY USB Low Layer Core PHY
- * @{
- */
-#define USB_OTG_ULPI_PHY 1
-#define USB_OTG_EMBEDDED_PHY 2
-/**
- * @}
- */
-
-/** @defgroup USB_LL_Core_MPS USB Low Layer Core MPS
- * @{
- */
-#define USB_OTG_FS_MAX_PACKET_SIZE 64
-#define USB_OTG_MAX_EP0_SIZE 64
-/**
- * @}
- */
-
-/** @defgroup USB_LL_Core_PHY_Frequency USB Low Layer Core PHY Frequency
- * @{
- */
-#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1 << 1)
-#define DSTS_ENUMSPD_LS_PHY_6MHZ (2 << 1)
-#define DSTS_ENUMSPD_FS_PHY_48MHZ (3 << 1)
-/**
- * @}
- */
-
-/** @defgroup USB_LL_CORE_Frame_Interval USB Low Layer Core Frame Interval
- * @{
- */
-#define DCFG_FRAME_INTERVAL_80 0
-#define DCFG_FRAME_INTERVAL_85 1
-#define DCFG_FRAME_INTERVAL_90 2
-#define DCFG_FRAME_INTERVAL_95 3
-/**
- * @}
- */
-
-/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS
- * @{
- */
-#define DEP0CTL_MPS_64 0
-#define DEP0CTL_MPS_32 1
-#define DEP0CTL_MPS_16 2
-#define DEP0CTL_MPS_8 3
-/**
- * @}
- */
-
-/** @defgroup USB_LL_EP_Speed USB Low Layer EP Speed
- * @{
- */
-#define EP_SPEED_LOW 0
-#define EP_SPEED_FULL 1
-#define EP_SPEED_HIGH 2
-/**
- * @}
- */
-
-/** @defgroup USB_LL_EP_Type USB Low Layer EP Type
- * @{
- */
-#define EP_TYPE_CTRL 0
-#define EP_TYPE_ISOC 1
-#define EP_TYPE_BULK 2
-#define EP_TYPE_INTR 3
-#define EP_TYPE_MSK 3
-/**
- * @}
- */
-
-/** @defgroup USB_LL_STS_Defines USB Low Layer STS Defines
- * @{
- */
-#define STS_GOUT_NAK 1
-#define STS_DATA_UPDT 2
-#define STS_XFER_COMP 3
-#define STS_SETUP_COMP 4
-#define STS_SETUP_UPDT 6
-/**
- * @}
- */
-
-/** @defgroup USB_LL_HCFG_SPEED_Defines USB Low Layer HCFG Speed Defines
- * @{
- */
-#define HCFG_30_60_MHZ 0
-#define HCFG_48_MHZ 1
-#define HCFG_6_MHZ 2
-/**
- * @}
- */
-
-/** @defgroup USB_LL_HPRT0_PRTSPD_SPEED_Defines USB Low Layer HPRT0 PRTSPD Speed Defines
- * @{
- */
-#define HPRT0_PRTSPD_HIGH_SPEED 0
-#define HPRT0_PRTSPD_FULL_SPEED 1
-#define HPRT0_PRTSPD_LOW_SPEED 2
-/**
- * @}
- */
-
-#define HCCHAR_CTRL 0
-#define HCCHAR_ISOC 1
-#define HCCHAR_BULK 2
-#define HCCHAR_INTR 3
-
-#define HC_PID_DATA0 0
-#define HC_PID_DATA2 1
-#define HC_PID_DATA1 2
-#define HC_PID_SETUP 3
-
-#define GRXSTS_PKTSTS_IN 2
-#define GRXSTS_PKTSTS_IN_XFER_COMP 3
-#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5
-#define GRXSTS_PKTSTS_CH_HALTED 7
-
-#define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_PCGCCTL_BASE)
-#define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_HOST_PORT_BASE)
-
-#define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)((uint32_t )USBx + USB_OTG_DEVICE_BASE))
-#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)((uint32_t)USBx + USB_OTG_IN_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
-#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)((uint32_t)USBx + USB_OTG_OUT_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
-#define USBx_DFIFO(i) *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_FIFO_BASE + (i) * USB_OTG_FIFO_SIZE)
-
-#define USBx_HOST ((USB_OTG_HostTypeDef *)((uint32_t )USBx + USB_OTG_HOST_BASE))
-#define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)((uint32_t)USBx + USB_OTG_HOST_CHANNEL_BASE + (i)*USB_OTG_HOST_CHANNEL_SIZE))
-#endif /* USB_OTG_FS */
-
-#if defined (USB)
-/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS
- * @{
- */
-#define DEP0CTL_MPS_64 0
-#define DEP0CTL_MPS_32 1
-#define DEP0CTL_MPS_16 2
-#define DEP0CTL_MPS_8 3
-/**
- * @}
- */
-
-/** @defgroup USB_LL_EP_Type USB Low Layer EP Type
- * @{
- */
-#define EP_TYPE_CTRL 0
-#define EP_TYPE_ISOC 1
-#define EP_TYPE_BULK 2
-#define EP_TYPE_INTR 3
-#define EP_TYPE_MSK 3
-/**
- * @}
- */
-
-#define BTABLE_ADDRESS (0x000)
-#endif /* USB */
-/**
- * @}
- */
-
-/* Exported macros -----------------------------------------------------------*/
-/** @defgroup USB_LL_Exported_Macros USB Low Layer Exported Macros
- * @{
- */
-#if defined (USB_OTG_FS)
-#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__))
-#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__))
-
-#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__))
-#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__))
-#endif /* USB_OTG_FS */
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions
- * @{
- */
-/** @addtogroup USB_LL_Exported_Functions_Group1 Peripheral Control functions
- * @{
- */
-#if defined (USB_OTG_FS)
-HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
-HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
-HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
-HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
-HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_ModeTypeDef mode);
-HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed);
-HAL_StatusTypeDef USB_FlushRxFifo (USB_OTG_GlobalTypeDef *USBx);
-HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num );
-HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
-HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
-HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
-HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
-HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len);
-void * USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len);
-HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
-HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
-HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address);
-HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx);
-HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx);
-HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx);
-HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx);
-HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t *psetup);
-uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx);
-uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx);
-uint32_t USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx);
-uint32_t USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx);
-uint32_t USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum);
-uint32_t USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx);
-uint32_t USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum);
-void USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt);
-
-HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
-HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq);
-HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx);
-HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state);
-uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx);
-uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx);
-HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx,
- uint8_t ch_num,
- uint8_t epnum,
- uint8_t dev_address,
- uint8_t speed,
- uint8_t ep_type,
- uint16_t mps);
-HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc);
-uint32_t USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx);
-HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num);
-HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num);
-HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx);
-HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx);
-HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx);
-#endif /* USB_OTG_FS */
-
-#if defined (USB)
-HAL_StatusTypeDef USB_CoreInit(USB_TypeDef *USBx, USB_CfgTypeDef Init);
-HAL_StatusTypeDef USB_DevInit(USB_TypeDef *USBx, USB_CfgTypeDef Init);
-HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx);
-HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx);
-HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx , USB_ModeTypeDef mode);
-HAL_StatusTypeDef USB_SetDevSpeed(USB_TypeDef *USBx , uint8_t speed);
-HAL_StatusTypeDef USB_FlushRxFifo (USB_TypeDef *USBx);
-HAL_StatusTypeDef USB_FlushTxFifo (USB_TypeDef *USBx, uint32_t num );
-HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep);
-HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep);
-HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx , USB_EPTypeDef *ep);
-HAL_StatusTypeDef USB_WritePacket(USB_TypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len);
-void * USB_ReadPacket(USB_TypeDef *USBx, uint8_t *dest, uint16_t len);
-HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx , USB_EPTypeDef *ep);
-HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx , USB_EPTypeDef *ep);
-HAL_StatusTypeDef USB_SetDevAddress (USB_TypeDef *USBx, uint8_t address);
-HAL_StatusTypeDef USB_DevConnect (USB_TypeDef *USBx);
-HAL_StatusTypeDef USB_DevDisconnect (USB_TypeDef *USBx);
-HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx);
-HAL_StatusTypeDef USB_EP0_OutStart(USB_TypeDef *USBx, uint8_t *psetup);
-uint32_t USB_ReadInterrupts (USB_TypeDef *USBx);
-uint32_t USB_ReadDevAllOutEpInterrupt (USB_TypeDef *USBx);
-uint32_t USB_ReadDevOutEPInterrupt (USB_TypeDef *USBx , uint8_t epnum);
-uint32_t USB_ReadDevAllInEpInterrupt (USB_TypeDef *USBx);
-uint32_t USB_ReadDevInEPInterrupt (USB_TypeDef *USBx , uint8_t epnum);
-void USB_ClearInterrupts (USB_TypeDef *USBx, uint32_t interrupt);
-
-HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx);
-HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx);
-void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
-void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
-#endif /* USB */
-/**
- * @}
- */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* STM32F102x6 || STM32F102xB || */
- /* STM32F103x6 || STM32F103xB || */
- /* STM32F103xE || STM32F103xG || */
- /* STM32F105xC || STM32F107xC */
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* __STM32F1xx_LL_USB_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c
deleted file mode 100644
index 19a4699..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c
+++ /dev/null
@@ -1,526 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal.c
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief HAL module driver.
- * This is the common part of the HAL initialization
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- The common HAL driver contains a set of generic and common APIs that can be
- used by the PPP peripheral drivers and the user to start using the HAL.
- [..]
- The HAL contains two APIs' categories:
- (+) Common HAL APIs
- (+) Services HAL APIs
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @defgroup HAL HAL
- * @brief HAL module driver.
- * @{
- */
-
-#ifdef HAL_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-
-/** @defgroup HAL_Private_Constants HAL Private Constants
- * @{
- */
-
-/**
- * @brief STM32F1xx HAL Driver version number
- */
-#define __STM32F1xx_HAL_VERSION_MAIN (0x01) /*!< [31:24] main version */
-#define __STM32F1xx_HAL_VERSION_SUB1 (0x00) /*!< [23:16] sub1 version */
-#define __STM32F1xx_HAL_VERSION_SUB2 (0x04) /*!< [15:8] sub2 version */
-#define __STM32F1xx_HAL_VERSION_RC (0x00) /*!< [7:0] release candidate */
-#define __STM32F1xx_HAL_VERSION ((__STM32F1xx_HAL_VERSION_MAIN << 24)\
- |(__STM32F1xx_HAL_VERSION_SUB1 << 16)\
- |(__STM32F1xx_HAL_VERSION_SUB2 << 8 )\
- |(__STM32F1xx_HAL_VERSION_RC))
-
-#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF)
-
-/**
- * @}
- */
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-
-/** @defgroup HAL_Private_Variables HAL Private Variables
- * @{
- */
-
-static __IO uint32_t uwTick;
-
-/**
- * @}
- */
-
-/* Private function prototypes -----------------------------------------------*/
-/* Exported functions ---------------------------------------------------------*/
-
-/** @defgroup HAL_Exported_Functions HAL Exported Functions
- * @{
- */
-
-/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions
- * @brief Initialization and de-initialization functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization and de-initialization functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Initializes the Flash interface, the NVIC allocation and initial clock
- configuration. It initializes the source of time base also when timeout
- is needed and the backup domain when enabled.
- (+) de-Initializes common part of the HAL.
- (+) Configure The time base source to have 1ms time base with a dedicated
- Tick interrupt priority.
- (++) Systick timer is used by default as source of time base, but user
- can eventually implement his proper time base source (a general purpose
- timer for example or other time source), keeping in mind that Time base
- duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
- handled in milliseconds basis.
- (++) Time base configuration function (HAL_InitTick ()) is called automatically
- at the beginning of the program after reset by HAL_Init() or at any time
- when clock is configured, by HAL_RCC_ClockConfig().
- (++) Source of time base is configured to generate interrupts at regular
- time intervals. Care must be taken if HAL_Delay() is called from a
- peripheral ISR process, the Tick interrupt line must have higher priority
- (numerically lower) than the peripheral interrupt. Otherwise the caller
- ISR process will be blocked.
- (++) functions affecting time base configurations are declared as __Weak
- to make override possible in case of other implementations in user file.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief This function configures the Flash prefetch,
- * Configures time base source, NVIC and Low level hardware
- * @note This function is called at the beginning of program after reset and before
- * the clock configuration
- * @note The time base configuration is based on MSI clock when exiting from Reset.
- * Once done, time base tick start incrementing.
- * In the default implementation,Systick is used as source of time base.
- * The tick variable is incremented each 1ms in its ISR.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_Init(void)
-{
- /* Configure Flash prefetch */
-#if (PREFETCH_ENABLE != 0)
-#if defined(STM32F101x6) || defined(STM32F101xB) || defined(STM32F101xE) || defined(STM32F101xG) || \
- defined(STM32F102x6) || defined(STM32F102xB) || \
- defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || \
- defined(STM32F105xC) || defined(STM32F107xC)
-
- /* Prefetch buffer is not available on value line devices */
- __HAL_FLASH_PREFETCH_BUFFER_ENABLE();
-#endif
-#endif /* PREFETCH_ENABLE */
-
- /* Set Interrupt Group Priority */
- HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
-
- /* Use systick as time base source and configure 1ms tick (default clock after Reset is MSI) */
- HAL_InitTick(TICK_INT_PRIORITY);
-
- /* Init the low level hardware */
- HAL_MspInit();
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief This function de-Initializes common part of the HAL and stops the source
- * of time base.
- * @note This function is optional.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DeInit(void)
-{
- /* Reset of all peripherals */
- __HAL_RCC_APB1_FORCE_RESET();
- __HAL_RCC_APB1_RELEASE_RESET();
-
- __HAL_RCC_APB2_FORCE_RESET();
- __HAL_RCC_APB2_RELEASE_RESET();
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
- __HAL_RCC_AHB_FORCE_RESET();
- __HAL_RCC_AHB_RELEASE_RESET();
-#endif
-
- /* De-Init the low level hardware */
- HAL_MspDeInit();
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the MSP.
- * @retval None
- */
-__weak void HAL_MspInit(void)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes the MSP.
- * @retval None
- */
-__weak void HAL_MspDeInit(void)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @brief This function configures the source of the time base.
- * The time source is configured to have 1ms time base with a dedicated
- * Tick interrupt priority.
- * @note This function is called automatically at the beginning of program after
- * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig().
- * @note In the default implementation, SysTick timer is the source of time base.
- * It is used to generate interrupts at regular time intervals.
- * Care must be taken if HAL_Delay() is called from a peripheral ISR process,
- * The the SysTick interrupt must have higher priority (numerically lower)
- * than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
- * The function is declared as __Weak to be overwritten in case of other
- * implementation in user file.
- * @param TickPriority: Tick interrupt priority.
- * @retval HAL status
- */
-__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
-{
- /*Configure the SysTick to have interrupt in 1ms time basis*/
- HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq()/1000);
-
- /*Configure the SysTick IRQ priority */
- HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority ,0);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions
- * @brief HAL Control functions
- *
-@verbatim
- ===============================================================================
- ##### HAL Control functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Provide a tick value in millisecond
- (+) Provide a blocking delay in millisecond
- (+) Suspend the time base source interrupt
- (+) Resume the time base source interrupt
- (+) Get the HAL API driver version
- (+) Get the device identifier
- (+) Get the device revision identifier
- (+) Enable/Disable Debug module during Sleep mode
- (+) Enable/Disable Debug module during STOP mode
- (+) Enable/Disable Debug module during STANDBY mode
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief This function is called to increment a global variable "uwTick"
- * used as application time base.
- * @note In the default implementation, this variable is incremented each 1ms
- * in Systick ISR.
- * @note This function is declared as __weak to be overwritten in case of other
- * implementations in user file.
- * @retval None
- */
-__weak void HAL_IncTick(void)
-{
- uwTick++;
-}
-
-/**
- * @brief Provides a tick value in millisecond.
- * @note This function is declared as __weak to be overwritten in case of other
- * implementations in user file.
- * @retval tick value
- */
-__weak uint32_t HAL_GetTick(void)
-{
- return uwTick;
-}
-
-/**
- * @brief This function provides accurate delay (in milliseconds) based
- * on variable incremented.
- * @note In the default implementation , SysTick timer is the source of time base.
- * It is used to generate interrupts at regular time intervals where uwTick
- * is incremented.
- * @note ThiS function is declared as __weak to be overwritten in case of other
- * implementations in user file.
- * @param Delay: specifies the delay time length, in milliseconds.
- * @retval None
- */
-__weak void HAL_Delay(__IO uint32_t Delay)
-{
- uint32_t tickstart = 0;
- tickstart = HAL_GetTick();
- while((HAL_GetTick() - tickstart) < Delay)
- {
- }
-}
-
-/**
- * @brief Suspend Tick increment.
- * @note In the default implementation , SysTick timer is the source of time base. It is
- * used to generate interrupts at regular time intervals. Once HAL_SuspendTick()
- * is called, the the SysTick interrupt will be disabled and so Tick increment
- * is suspended.
- * @note This function is declared as __weak to be overwritten in case of other
- * implementations in user file.
- * @retval None
- */
-__weak void HAL_SuspendTick(void)
-{
- /* Disable SysTick Interrupt */
- CLEAR_BIT(SysTick->CTRL,SysTick_CTRL_TICKINT_Msk);
-}
-
-/**
- * @brief Resume Tick increment.
- * @note In the default implementation , SysTick timer is the source of time base. It is
- * used to generate interrupts at regular time intervals. Once HAL_ResumeTick()
- * is called, the the SysTick interrupt will be enabled and so Tick increment
- * is resumed.
- * @note This function is declared as __weak to be overwritten in case of other
- * implementations in user file.
- * @retval None
- */
-__weak void HAL_ResumeTick(void)
-{
- /* Enable SysTick Interrupt */
- SET_BIT(SysTick->CTRL,SysTick_CTRL_TICKINT_Msk);
-}
-
-/**
- * @brief This method returns the HAL revision
- * @retval version: 0xXYZR (8bits for each decimal, R for RC)
- */
-uint32_t HAL_GetHalVersion(void)
-{
- return __STM32F1xx_HAL_VERSION;
-}
-
-/**
- * @brief Returns the device revision identifier.
- * Note: On devices STM32F10xx8 and STM32F10xxB,
- * STM32F101xC/D/E and STM32F103xC/D/E,
- * STM32F101xF/G and STM32F103xF/G
- * STM32F10xx4 and STM32F10xx6
- * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
- * debug mode (not accessible by the user software in normal mode).
- * Refer to errata sheet of these devices for more details.
- * @retval Device revision identifier
- */
-uint32_t HAL_GetREVID(void)
-{
- return((DBGMCU->IDCODE) >> POSITION_VAL(DBGMCU_IDCODE_REV_ID));
-}
-
-/**
- * @brief Returns the device identifier.
- * Note: On devices STM32F10xx8 and STM32F10xxB,
- * STM32F101xC/D/E and STM32F103xC/D/E,
- * STM32F101xF/G and STM32F103xF/G
- * STM32F10xx4 and STM32F10xx6
- * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
- * debug mode (not accessible by the user software in normal mode).
- * Refer to errata sheet of these devices for more details.
- * @retval Device identifier
- */
-uint32_t HAL_GetDEVID(void)
-{
- return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK);
-}
-
-/**
- * @brief Enable the Debug Module during SLEEP mode
- * @retval None
- */
-void HAL_DBGMCU_EnableDBGSleepMode(void)
-{
- SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
-}
-
-/**
- * @brief Disable the Debug Module during SLEEP mode
- * Note: On devices STM32F10xx8 and STM32F10xxB,
- * STM32F101xC/D/E and STM32F103xC/D/E,
- * STM32F101xF/G and STM32F103xF/G
- * STM32F10xx4 and STM32F10xx6
- * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
- * debug mode (not accessible by the user software in normal mode).
- * Refer to errata sheet of these devices for more details.
- * @retval None
- */
-void HAL_DBGMCU_DisableDBGSleepMode(void)
-{
- CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
-}
-
-/**
- * @brief Enable the Debug Module during STOP mode
- * Note: On devices STM32F10xx8 and STM32F10xxB,
- * STM32F101xC/D/E and STM32F103xC/D/E,
- * STM32F101xF/G and STM32F103xF/G
- * STM32F10xx4 and STM32F10xx6
- * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
- * debug mode (not accessible by the user software in normal mode).
- * Refer to errata sheet of these devices for more details.
- * Note: On all STM32F1 devices:
- * If the system tick timer interrupt is enabled during the Stop mode
- * debug (DBG_STOP bit set in the DBGMCU_CR register ), it will wakeup
- * the system from Stop mode.
- * Workaround: To debug the Stop mode, disable the system tick timer
- * interrupt.
- * Refer to errata sheet of these devices for more details.
- * Note: On all STM32F1 devices:
- * If the system tick timer interrupt is enabled during the Stop mode
- * debug (DBG_STOP bit set in the DBGMCU_CR register ), it will wakeup
- * the system from Stop mode.
- * Workaround: To debug the Stop mode, disable the system tick timer
- * interrupt.
- * Refer to errata sheet of these devices for more details.
- * @retval None
- */
-void HAL_DBGMCU_EnableDBGStopMode(void)
-{
- SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
-}
-
-/**
- * @brief Disable the Debug Module during STOP mode
- * Note: On devices STM32F10xx8 and STM32F10xxB,
- * STM32F101xC/D/E and STM32F103xC/D/E,
- * STM32F101xF/G and STM32F103xF/G
- * STM32F10xx4 and STM32F10xx6
- * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
- * debug mode (not accessible by the user software in normal mode).
- * Refer to errata sheet of these devices for more details.
- * @retval None
- */
-void HAL_DBGMCU_DisableDBGStopMode(void)
-{
- CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
-}
-
-/**
- * @brief Enable the Debug Module during STANDBY mode
- * Note: On devices STM32F10xx8 and STM32F10xxB,
- * STM32F101xC/D/E and STM32F103xC/D/E,
- * STM32F101xF/G and STM32F103xF/G
- * STM32F10xx4 and STM32F10xx6
- * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
- * debug mode (not accessible by the user software in normal mode).
- * Refer to errata sheet of these devices for more details.
- * @retval None
- */
-void HAL_DBGMCU_EnableDBGStandbyMode(void)
-{
- SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
-}
-
-/**
- * @brief Disable the Debug Module during STANDBY mode
- * Note: On devices STM32F10xx8 and STM32F10xxB,
- * STM32F101xC/D/E and STM32F103xC/D/E,
- * STM32F101xF/G and STM32F103xF/G
- * STM32F10xx4 and STM32F10xx6
- * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in
- * debug mode (not accessible by the user software in normal mode).
- * Refer to errata sheet of these devices for more details.
- * @retval None
- */
-void HAL_DBGMCU_DisableDBGStandbyMode(void)
-{
- CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* HAL_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c
deleted file mode 100644
index 836503c..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c
+++ /dev/null
@@ -1,494 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_cortex.c
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief CORTEX HAL module driver.
- *
- * This file provides firmware functions to manage the following
- * functionalities of the CORTEX:
- * + Initialization and de-initialization functions
- * + Peripheral Control functions
- *
- * @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
-
- [..]
- *** How to configure Interrupts using Cortex HAL driver ***
- ===========================================================
- [..]
- This section provide functions allowing to configure the NVIC interrupts (IRQ).
- The Cortex-M3 exceptions are managed by CMSIS functions.
-
- (#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping()
- function according to the following table.
-
- The table below gives the allowed values of the pre-emption priority and subpriority according
- to the Priority Grouping configuration performed by HAL_NVIC_SetPriorityGrouping() function.
- ==========================================================================================================================
- NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description
- ==========================================================================================================================
- NVIC_PRIORITYGROUP_0 | 0 | 0-15 | 0 bits for pre-emption priority
- | | | 4 bits for subpriority
- --------------------------------------------------------------------------------------------------------------------------
- NVIC_PRIORITYGROUP_1 | 0-1 | 0-7 | 1 bits for pre-emption priority
- | | | 3 bits for subpriority
- --------------------------------------------------------------------------------------------------------------------------
- NVIC_PRIORITYGROUP_2 | 0-3 | 0-3 | 2 bits for pre-emption priority
- | | | 2 bits for subpriority
- --------------------------------------------------------------------------------------------------------------------------
- NVIC_PRIORITYGROUP_3 | 0-7 | 0-1 | 3 bits for pre-emption priority
- | | | 1 bits for subpriority
- --------------------------------------------------------------------------------------------------------------------------
- NVIC_PRIORITYGROUP_4 | 0-15 | 0 | 4 bits for pre-emption priority
- | | | 0 bits for subpriority
- ==========================================================================================================================
- (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority()
-
- (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ()
-
-
- -@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ pre-emption is no more possible.
- The pending IRQ priority will be managed only by the sub priority.
-
- -@- IRQ priority order (sorted by highest to lowest priority):
- (+@) Lowest pre-emption priority
- (+@) Lowest sub priority
- (+@) Lowest hardware priority (IRQ number)
-
- [..]
- *** How to configure Systick using Cortex HAL driver ***
- ========================================================
- [..]
- Setup SysTick Timer for 1 msec interrupts.
-
- (+) The HAL_SYSTICK_Config()function calls the SysTick_Config() function which
- is a CMSIS function that:
- (++) Configures the SysTick Reload register with value passed as function parameter.
- (++) Configures the SysTick IRQ priority to the lowest value (0x0F).
- (++) Resets the SysTick Counter register.
- (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK).
- (++) Enables the SysTick Interrupt.
- (++) Starts the SysTick Counter.
-
- (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the function
- HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the
- HAL_SYSTICK_Config() function call.
-
- (+) You can change the SysTick IRQ priority by calling the
- HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function
- call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function.
-
- (+) To adjust the SysTick time base, use the following formula:
-
- Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s)
- (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function
- (++) Reload Value should not exceed 0xFFFFFF
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @defgroup CORTEX CORTEX
- * @brief CORTEX HAL module driver
- * @{
- */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions
- * @{
- */
-
-
-/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ==============================================================================
- ##### Initialization and de-initialization functions #####
- ==============================================================================
- [..]
- This section provide the Cortex HAL driver functions allowing to configure Interrupts
- Systick functionalities
-
-@endverbatim
- * @{
- */
-
-
-/**
- * @brief Sets the priority grouping field (pre-emption priority and subpriority)
- * using the required unlock sequence.
- * @param PriorityGroup: The priority grouping bits length.
- * This parameter can be one of the following values:
- * @arg NVIC_PRIORITYGROUP_0: 0 bits for pre-emption priority
- * 4 bits for subpriority
- * @arg NVIC_PRIORITYGROUP_1: 1 bits for pre-emption priority
- * 3 bits for subpriority
- * @arg NVIC_PRIORITYGROUP_2: 2 bits for pre-emption priority
- * 2 bits for subpriority
- * @arg NVIC_PRIORITYGROUP_3: 3 bits for pre-emption priority
- * 1 bits for subpriority
- * @arg NVIC_PRIORITYGROUP_4: 4 bits for pre-emption priority
- * 0 bits for subpriority
- * @note When the NVIC_PriorityGroup_0 is selected, IRQ pre-emption is no more possible.
- * The pending IRQ priority will be managed only by the subpriority.
- * @retval None
- */
-void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
-{
- /* Check the parameters */
- assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
-
- /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */
- NVIC_SetPriorityGrouping(PriorityGroup);
-}
-
-/**
- * @brief Sets the priority of an interrupt.
- * @param IRQn: External interrupt number
- * This parameter can be an enumerator of IRQn_Type enumeration
- * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h))
- * @param PreemptPriority: The pre-emption priority for the IRQn channel.
- * This parameter can be a value between 0 and 15
- * A lower priority value indicates a higher priority
- * @param SubPriority: the subpriority level for the IRQ channel.
- * This parameter can be a value between 0 and 15
- * A lower priority value indicates a higher priority.
- * @retval None
- */
-void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority)
-{
- uint32_t prioritygroup = 0x00;
-
- /* Check the parameters */
- assert_param(IS_NVIC_SUB_PRIORITY(SubPriority));
- assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority));
-
- prioritygroup = NVIC_GetPriorityGrouping();
-
- NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority));
-}
-
-/**
- * @brief Enables a device specific interrupt in the NVIC interrupt controller.
- * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
- * function should be called before.
- * @param IRQn External interrupt number
- * This parameter can be an enumerator of IRQn_Type enumeration
- * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h))
- * @retval None
- */
-void HAL_NVIC_EnableIRQ(IRQn_Type IRQn)
-{
- /* Check the parameters */
- assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
-
- /* Enable interrupt */
- NVIC_EnableIRQ(IRQn);
-}
-
-/**
- * @brief Disables a device specific interrupt in the NVIC interrupt controller.
- * @param IRQn External interrupt number
- * This parameter can be an enumerator of IRQn_Type enumeration
- * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h))
- * @retval None
- */
-void HAL_NVIC_DisableIRQ(IRQn_Type IRQn)
-{
- /* Check the parameters */
- assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
-
-
- /* Disable interrupt */
- NVIC_DisableIRQ(IRQn);
-}
-
-/**
- * @brief Initiates a system reset request to reset the MCU.
- * @retval None
- */
-void HAL_NVIC_SystemReset(void)
-{
- /* System Reset */
- NVIC_SystemReset();
-}
-
-/**
- * @brief Initializes the System Timer and its interrupt, and starts the System Tick Timer.
- * Counter is in free running mode to generate periodic interrupts.
- * @param TicksNumb: Specifies the ticks Number of ticks between two interrupts.
- * @retval status: - 0 Function succeeded.
- * - 1 Function failed.
- */
-uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb)
-{
- return SysTick_Config(TicksNumb);
-}
-/**
- * @}
- */
-
-/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions
- * @brief Cortex control functions
- *
-@verbatim
- ==============================================================================
- ##### Peripheral Control functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to control the CORTEX
- (NVIC, SYSTICK, MPU) functionalities.
-
-
-@endverbatim
- * @{
- */
-
-#if (__MPU_PRESENT == 1)
-/**
- * @brief Initializes and configures the Region and the memory to be protected.
- * @param MPU_Init: Pointer to a MPU_Region_InitTypeDef structure that contains
- * the initialization and configuration information.
- * @retval None
- */
-void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init)
-{
- /* Check the parameters */
- assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number));
- assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable));
-
- /* Set the Region number */
- MPU->RNR = MPU_Init->Number;
-
- if ((MPU_Init->Enable) != RESET)
- {
- /* Check the parameters */
- assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec));
- assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission));
- assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField));
- assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable));
- assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable));
- assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable));
- assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable));
- assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size));
-
- MPU->RBAR = MPU_Init->BaseAddress;
- MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) |
- ((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) |
- ((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) |
- ((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) |
- ((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) |
- ((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) |
- ((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) |
- ((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) |
- ((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos);
- }
- else
- {
- MPU->RBAR = 0x00;
- MPU->RASR = 0x00;
- }
-}
-#endif /* __MPU_PRESENT */
-
-/**
- * @brief Gets the priority grouping field from the NVIC Interrupt Controller.
- * @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field)
- */
-uint32_t HAL_NVIC_GetPriorityGrouping(void)
-{
- /* Get the PRIGROUP[10:8] field value */
- return NVIC_GetPriorityGrouping();
-}
-
-/**
- * @brief Gets the priority of an interrupt.
- * @param IRQn: External interrupt number
- * This parameter can be an enumerator of IRQn_Type enumeration
- * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h))
- * @param PriorityGroup: the priority grouping bits length.
- * This parameter can be one of the following values:
- * @arg NVIC_PRIORITYGROUP_0: 0 bits for pre-emption priority
- * 4 bits for subpriority
- * @arg NVIC_PRIORITYGROUP_1: 1 bits for pre-emption priority
- * 3 bits for subpriority
- * @arg NVIC_PRIORITYGROUP_2: 2 bits for pre-emption priority
- * 2 bits for subpriority
- * @arg NVIC_PRIORITYGROUP_3: 3 bits for pre-emption priority
- * 1 bits for subpriority
- * @arg NVIC_PRIORITYGROUP_4: 4 bits for pre-emption priority
- * 0 bits for subpriority
- * @param pPreemptPriority: Pointer on the Preemptive priority value (starting from 0).
- * @param pSubPriority: Pointer on the Subpriority value (starting from 0).
- * @retval None
- */
-void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
-{
- /* Check the parameters */
- assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
- /* Get priority for Cortex-M system or device specific interrupts */
- NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority);
-}
-
-/**
- * @brief Sets Pending bit of an external interrupt.
- * @param IRQn External interrupt number
- * This parameter can be an enumerator of IRQn_Type enumeration
- * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h))
- * @retval None
- */
-void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn)
-{
- /* Set interrupt pending */
- NVIC_SetPendingIRQ(IRQn);
-}
-
-/**
- * @brief Gets Pending Interrupt (reads the pending register in the NVIC
- * and returns the pending bit for the specified interrupt).
- * @param IRQn External interrupt number
- * This parameter can be an enumerator of IRQn_Type enumeration
- * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h))
- * @retval status: - 0 Interrupt status is not pending.
- * - 1 Interrupt status is pending.
- */
-uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn)
-{
- /* Return 1 if pending else 0 */
- return NVIC_GetPendingIRQ(IRQn);
-}
-
-/**
- * @brief Clears the pending bit of an external interrupt.
- * @param IRQn External interrupt number
- * This parameter can be an enumerator of IRQn_Type enumeration
- * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h))
- * @retval None
- */
-void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn)
-{
- /* Clear pending interrupt */
- NVIC_ClearPendingIRQ(IRQn);
-}
-
-/**
- * @brief Gets active interrupt ( reads the active register in NVIC and returns the active bit).
- * @param IRQn External interrupt number
- * This parameter can be an enumerator of IRQn_Type enumeration
- * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h))
- * @retval status: - 0 Interrupt status is not pending.
- * - 1 Interrupt status is pending.
- */
-uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn)
-{
- /* Return 1 if active else 0 */
- return NVIC_GetActive(IRQn);
-}
-
-/**
- * @brief Configures the SysTick clock source.
- * @param CLKSource: specifies the SysTick clock source.
- * This parameter can be one of the following values:
- * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
- * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
- * @retval None
- */
-void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource)
-{
- /* Check the parameters */
- assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource));
- if (CLKSource == SYSTICK_CLKSOURCE_HCLK)
- {
- SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK;
- }
- else
- {
- SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK;
- }
-}
-
-/**
- * @brief This function handles SYSTICK interrupt request.
- * @retval None
- */
-void HAL_SYSTICK_IRQHandler(void)
-{
- HAL_SYSTICK_Callback();
-}
-
-/**
- * @brief SYSTICK callback.
- * @retval None
- */
-__weak void HAL_SYSTICK_Callback(void)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SYSTICK_Callback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c
deleted file mode 100644
index a249c81..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c
+++ /dev/null
@@ -1,709 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_dma.c
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief DMA HAL module driver.
- *
- * This file provides firmware functions to manage the following
- * functionalities of the Direct Memory Access (DMA) peripheral:
- * + Initialization and de-initialization functions
- * + IO operation functions
- * + Peripheral State and errors functions
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- (#) Enable and configure the peripheral to be connected to the DMA Channel
- (except for internal SRAM / FLASH memories: no initialization is
- necessary) please refer to Reference manual for connection between peripherals
- and DMA requests.
-
- (#) For a given Channel, program the required configuration through the following parameters:
- Transfer Direction, Source and Destination data formats,
- Circular or Normal mode, Channel Priority level, Source and Destination Increment mode,
- using HAL_DMA_Init() function.
-
- (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error
- detection.
-
- (#) Use HAL_DMA_Abort() function to abort the current transfer
-
- -@- In Memory-to-Memory transfer mode, Circular mode is not allowed.
- *** Polling mode IO operation ***
- =================================
- [..]
- (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source
- address and destination address and the Length of data to be transferred
- (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this
- case a fixed Timeout can be configured by User depending from his application.
-
- *** Interrupt mode IO operation ***
- ===================================
- [..]
- (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority()
- (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ()
- (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of
- Source address and destination address and the Length of data to be transferred.
- In this case the DMA interrupt is configured
- (+) Use HAL_DMAy_Channelx_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine
- (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can
- add his own function by customization of function pointer XferCpltCallback and
- XferErrorCallback (i.e a member of DMA handle structure).
-
- *** DMA HAL driver macros list ***
- =============================================
- [..]
- Below the list of most used macros in DMA HAL driver.
-
- (+) __HAL_DMA_ENABLE: Enable the specified DMA Channel.
- (+) __HAL_DMA_DISABLE: Disable the specified DMA Channel.
- (+) __HAL_DMA_GET_FLAG: Get the DMA Channel pending flags.
- (+) __HAL_DMA_CLEAR_FLAG: Clear the DMA Channel pending flags.
- (+) __HAL_DMA_ENABLE_IT: Enable the specified DMA Channel interrupts.
- (+) __HAL_DMA_DISABLE_IT: Disable the specified DMA Channel interrupts.
- (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Channel interrupt has occurred or not.
-
- [..]
- (@) You can refer to the DMA HAL driver header file for more useful macros
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @defgroup DMA DMA
- * @brief DMA HAL module driver
- * @{
- */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @defgroup DMA_Private_Constants DMA Private Constants
- * @{
- */
-#define HAL_TIMEOUT_DMA_ABORT ((uint32_t)1000) /* 1s */
-/**
- * @}
- */
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/** @defgroup DMA_Private_Functions DMA Private Functions
- * @{
- */
-static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
-/**
- * @}
- */
-
-/* Exported functions ---------------------------------------------------------*/
-
-/** @defgroup DMA_Exported_Functions DMA Exported Functions
- * @{
- */
-
-/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and de-initialization functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization and de-initialization functions #####
- ===============================================================================
- [..]
- This section provides functions allowing to initialize the DMA Channel source
- and destination addresses, incrementation and data sizes, transfer direction,
- circular/normal mode selection, memory-to-memory mode selection and Channel priority value.
- [..]
- The HAL_DMA_Init() function follows the DMA configuration procedures as described in
- reference manual.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the DMA according to the specified
- * parameters in the DMA_InitTypeDef and create the associated handle.
- * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA Channel.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma)
-{
- uint32_t tmp = 0;
-
- /* Check the DMA handle allocation */
- if(hdma == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
- assert_param(IS_DMA_DIRECTION(hdma->Init.Direction));
- assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc));
- assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc));
- assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment));
- assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment));
- assert_param(IS_DMA_MODE(hdma->Init.Mode));
- assert_param(IS_DMA_PRIORITY(hdma->Init.Priority));
-
- if(hdma->State == HAL_DMA_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hdma->Lock = HAL_UNLOCKED;
- }
-
- /* Change DMA peripheral state */
- hdma->State = HAL_DMA_STATE_BUSY;
-
- /* Get the CR register value */
- tmp = hdma->Instance->CCR;
-
- /* Clear PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR bits */
- tmp &= ((uint32_t)~(DMA_CCR_PL | DMA_CCR_MSIZE | DMA_CCR_PSIZE | \
- DMA_CCR_MINC | DMA_CCR_PINC | DMA_CCR_CIRC | \
- DMA_CCR_DIR));
-
- /* Prepare the DMA Channel configuration */
- tmp |= hdma->Init.Direction |
- hdma->Init.PeriphInc | hdma->Init.MemInc |
- hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment |
- hdma->Init.Mode | hdma->Init.Priority;
-
- /* Write to DMA Channel CR register */
- hdma->Instance->CCR = tmp;
-
- /* Initialise the error code */
- hdma->ErrorCode = HAL_DMA_ERROR_NONE;
-
- /* Initialize the DMA state*/
- hdma->State = HAL_DMA_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the DMA peripheral
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA Channel.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma)
-{
- /* Check the DMA handle allocation */
- if(hdma == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance));
-
- /* Check the DMA peripheral state */
- if(hdma->State == HAL_DMA_STATE_BUSY)
- {
- return HAL_ERROR;
- }
-
- /* Disable the selected DMA Channelx */
- __HAL_DMA_DISABLE(hdma);
-
- /* Reset DMA Channel control register */
- hdma->Instance->CCR = 0;
-
- /* Reset DMA Channel Number of Data to Transfer register */
- hdma->Instance->CNDTR = 0;
-
- /* Reset DMA Channel peripheral address register */
- hdma->Instance->CPAR = 0;
-
- /* Reset DMA Channel memory address register */
- hdma->Instance->CMAR = 0;
-
- /* Clear all flags */
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma));
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma));
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
-
- /* Initialize the error code */
- hdma->ErrorCode = HAL_DMA_ERROR_NONE;
-
- /* Initialize the DMA state */
- hdma->State = HAL_DMA_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hdma);
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup DMA_Exported_Functions_Group2 Input and Output operation functions
- * @brief I/O operation functions
- *
-@verbatim
- ===============================================================================
- ##### IO operation functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Configure the source, destination address and data length and Start DMA transfer
- (+) Configure the source, destination address and data length and
- Start DMA transfer with interrupt
- (+) Abort DMA transfer
- (+) Poll for transfer complete
- (+) Handle DMA interrupt request
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Starts the DMA Transfer.
- * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA Channel.
- * @param SrcAddress: The source memory Buffer address
- * @param DstAddress: The destination memory Buffer address
- * @param DataLength: The length of data to be transferred from source to destination
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
-{
- /* Process locked */
- __HAL_LOCK(hdma);
-
- /* Change DMA peripheral state */
- hdma->State = HAL_DMA_STATE_BUSY;
-
- /* Check the parameters */
- assert_param(IS_DMA_BUFFER_SIZE(DataLength));
-
- /* Disable the peripheral */
- __HAL_DMA_DISABLE(hdma);
-
- /* Configure the source, destination address and the data length */
- DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
-
- /* Enable the Peripheral */
- __HAL_DMA_ENABLE(hdma);
-
- return HAL_OK;
-}
-
-/**
- * @brief Start the DMA Transfer with interrupt enabled.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA Channel.
- * @param SrcAddress: The source memory Buffer address
- * @param DstAddress: The destination memory Buffer address
- * @param DataLength: The length of data to be transferred from source to destination
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
-{
- /* Process locked */
- __HAL_LOCK(hdma);
-
- /* Change DMA peripheral state */
- hdma->State = HAL_DMA_STATE_BUSY;
-
- /* Check the parameters */
- assert_param(IS_DMA_BUFFER_SIZE(DataLength));
-
- /* Disable the peripheral */
- __HAL_DMA_DISABLE(hdma);
-
- /* Configure the source, destination address and the data length */
- DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
-
- /* Enable the transfer complete interrupt */
- __HAL_DMA_ENABLE_IT(hdma, DMA_IT_TC);
-
- /* Enable the Half transfer complete interrupt */
- __HAL_DMA_ENABLE_IT(hdma, DMA_IT_HT);
-
- /* Enable the transfer Error interrupt */
- __HAL_DMA_ENABLE_IT(hdma, DMA_IT_TE);
-
- /* Enable the Peripheral */
- __HAL_DMA_ENABLE(hdma);
-
- return HAL_OK;
-}
-
-/**
- * @brief Aborts the DMA Transfer.
- * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA Channel.
- *
- * @note After disabling a DMA Channel, a check for wait until the DMA Channel is
- * effectively disabled is added. If a Channel is disabled
- * while a data transfer is ongoing, the current data will be transferred
- * and the Channel will be effectively disabled only after the transfer of
- * this single data is finished.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma)
-{
- uint32_t tickstart = 0x00;
-
- /* Disable the channel */
- __HAL_DMA_DISABLE(hdma);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Check if the DMA Channel is effectively disabled */
- while((hdma->Instance->CCR & DMA_CCR_EN) != 0)
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart) > HAL_TIMEOUT_DMA_ABORT)
- {
- /* Update error code */
- SET_BIT(hdma->ErrorCode, HAL_DMA_ERROR_TIMEOUT);
-
- /* Change the DMA state */
- hdma->State = HAL_DMA_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdma);
-
- return HAL_TIMEOUT;
- }
- }
- /* Change the DMA state */
- hdma->State = HAL_DMA_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdma);
-
- return HAL_OK;
-}
-
-/**
- * @brief Polling for transfer complete.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA Channel.
- * @param CompleteLevel: Specifies the DMA level complete.
- * @param Timeout: Timeout duration.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout)
-{
- uint32_t temp;
- uint32_t tickstart = 0x00;
-
- /* Get the level transfer complete flag */
- if(CompleteLevel == HAL_DMA_FULL_TRANSFER)
- {
- /* Transfer Complete flag */
- temp = __HAL_DMA_GET_TC_FLAG_INDEX(hdma);
- }
- else
- {
- /* Half Transfer Complete flag */
- temp = __HAL_DMA_GET_HT_FLAG_INDEX(hdma);
- }
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(__HAL_DMA_GET_FLAG(hdma, temp) == RESET)
- {
- if((__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma)) != RESET))
- {
- /* Clear the transfer error flags */
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma));
-
- /* Update error code */
- SET_BIT(hdma->ErrorCode, HAL_DMA_ERROR_TE);
-
- /* Change the DMA state */
- hdma->State= HAL_DMA_STATE_ERROR;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdma);
-
- return HAL_ERROR;
- }
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
- {
- /* Update error code */
- SET_BIT(hdma->ErrorCode, HAL_DMA_ERROR_TIMEOUT);
-
- /* Change the DMA state */
- hdma->State = HAL_DMA_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdma);
-
- return HAL_TIMEOUT;
- }
- }
- }
-
- if(CompleteLevel == HAL_DMA_FULL_TRANSFER)
- {
- /* Clear the transfer complete flag */
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma));
-
- /* The selected Channelx EN bit is cleared (DMA is disabled and
- all transfers are complete) */
- hdma->State = HAL_DMA_STATE_READY;
-
- }
- else
- {
- /* Clear the half transfer complete flag */
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
-
- /* The selected Channelx EN bit is cleared (DMA is disabled and
- all transfers of half buffer are complete) */
- hdma->State = HAL_DMA_STATE_READY_HALF;
- }
-
- /* Process unlocked */
- __HAL_UNLOCK(hdma);
-
- return HAL_OK;
-}
-
-/**
- * @brief Handles DMA interrupt request.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA Channel.
- * @retval None
- */
-void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma)
-{
- /* Transfer Error Interrupt management ***************************************/
- if(__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma)) != RESET)
- {
- if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TE) != RESET)
- {
- /* Disable the transfer error interrupt */
- __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TE);
-
- /* Clear the transfer error flag */
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma));
-
- /* Update error code */
- SET_BIT(hdma->ErrorCode, HAL_DMA_ERROR_TE);
-
- /* Change the DMA state */
- hdma->State = HAL_DMA_STATE_ERROR;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdma);
-
- if (hdma->XferErrorCallback != NULL)
- {
- /* Transfer error callback */
- hdma->XferErrorCallback(hdma);
- }
- }
- }
-
- /* Half Transfer Complete Interrupt management ******************************/
- if(__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma)) != RESET)
- {
- if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_HT) != RESET)
- {
- /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */
- if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0)
- {
- /* Disable the half transfer interrupt */
- __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT);
- }
- /* Clear the half transfer complete flag */
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
-
- /* Change DMA peripheral state */
- hdma->State = HAL_DMA_STATE_READY_HALF;
-
- if(hdma->XferHalfCpltCallback != NULL)
- {
- /* Half transfer callback */
- hdma->XferHalfCpltCallback(hdma);
- }
- }
- }
-
- /* Transfer Complete Interrupt management ***********************************/
- if(__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma)) != RESET)
- {
- if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TC) != RESET)
- {
- if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0)
- {
- /* Disable the transfer complete interrupt */
- __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TC);
- }
- /* Clear the transfer complete flag */
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma));
-
- /* Update error code */
- SET_BIT(hdma->ErrorCode, HAL_DMA_ERROR_NONE);
-
- /* Change the DMA state */
- hdma->State = HAL_DMA_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdma);
-
- if(hdma->XferCpltCallback != NULL)
- {
- /* Transfer complete callback */
- hdma->XferCpltCallback(hdma);
- }
- }
- }
-}
-
-/**
- * @}
- */
-
-/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions
- * @brief Peripheral State functions
- *
-@verbatim
- ===============================================================================
- ##### State and Errors functions #####
- ===============================================================================
- [..]
- This subsection provides functions allowing to
- (+) Check the DMA state
- (+) Get error code
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Returns the DMA state.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA Channel.
- * @retval HAL state
- */
-HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma)
-{
- return hdma->State;
-}
-
-/**
- * @brief Return the DMA error code
- * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA Channel.
- * @retval DMA Error Code
- */
-uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma)
-{
- return hdma->ErrorCode;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/** @addtogroup DMA_Private_Functions DMA Private Functions
- * @{
- */
-
-/**
- * @brief Sets the DMA Transfer parameter.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA Channel.
- * @param SrcAddress: The source memory Buffer address
- * @param DstAddress: The destination memory Buffer address
- * @param DataLength: The length of data to be transferred from source to destination
- * @retval HAL status
- */
-static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
-{
- /* Configure DMA Channel data length */
- hdma->Instance->CNDTR = DataLength;
-
- /* Peripheral to Memory */
- if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
- {
- /* Configure DMA Channel destination address */
- hdma->Instance->CPAR = DstAddress;
-
- /* Configure DMA Channel source address */
- hdma->Instance->CMAR = SrcAddress;
- }
- /* Memory to Peripheral */
- else
- {
- /* Configure DMA Channel source address */
- hdma->Instance->CPAR = SrcAddress;
-
- /* Configure DMA Channel destination address */
- hdma->Instance->CMAR = DstAddress;
- }
-}
-
-/**
- * @}
- */
-
-#endif /* HAL_DMA_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c
deleted file mode 100644
index b59e08c..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c
+++ /dev/null
@@ -1,974 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_flash.c
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief FLASH HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the internal FLASH memory:
- * + Program operations functions
- * + Memory Control functions
- * + Peripheral State functions
- *
- @verbatim
- ==============================================================================
- ##### FLASH peripheral features #####
- ==============================================================================
- [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses
- to the Flash memory. It implements the erase and program Flash memory operations
- and the read and write protection mechanisms.
-
- [..] The Flash memory interface accelerates code execution with a system of instruction
- prefetch.
-
- [..] The FLASH main features are:
- (+) Flash memory read operations
- (+) Flash memory program/erase operations
- (+) Read / write protections
- (+) Prefetch on I-Code
- (+) Option Bytes programming
-
-
- ##### How to use this driver #####
- ==============================================================================
- [..]
- This driver provides functions and macros to configure and program the FLASH
- memory of all STM32F1xx devices.
-
- (#) FLASH Memory I/O Programming functions: this group includes all needed
- functions to erase and program the main memory:
- (++) Lock and Unlock the FLASH interface
- (++) Erase function: Erase page, erase all pages
- (++) Program functions: half word, word and doubleword
-
- (#) FLASH Option Bytes Programming functions: this group includes all needed
- functions to manage the Option Bytes:
- (++) Lock and Unlock the Option Bytes
- (++) Set/Reset the write protection
- (++) Set the Read protection Level
- (++) Program the user Option Bytes
- (++) Launch the Option Bytes loader
- (++) Erase Option Bytes
- (++) Program the data Option Bytes
- (++) Get the Write protection.
- (++) Get the user option bytes.
-
- (#) Interrupts and flags management functions : this group
- includes all needed functions to:
- (++) Handle FLASH interrupts
- (++) Wait for last FLASH operation according to its status
- (++) Get error flag status
-
- [..] In addition to these function, this driver includes a set of macros allowing
- to handle the following operations:
-
- (+) Set/Get the latency
- (+) Enable/Disable the prefetch buffer
- (+) Enable/Disable the half cycle access
- (+) Enable/Disable the FLASH interrupts
- (+) Monitor the FLASH flags status
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-
-/** @defgroup FLASH FLASH
- * @brief FLASH HAL module driver
- * @{
- */
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @defgroup FLASH_Private_Constants FLASH Private Constants
- * @{
- */
-/**
- * @}
- */
-
-/* Private macro ---------------------------- ---------------------------------*/
-/** @defgroup FLASH_Private_Macros FLASH Private Macros
- * @{
- */
-
-/**
- * @}
- */
-
-/* Private variables ---------------------------------------------------------*/
-/** @defgroup FLASH_Private_Variables FLASH Private Variables
- * @{
- */
-/* Variables used for Erase pages under interruption*/
-FLASH_ProcessTypeDef pFlash;
-/**
- * @}
- */
-
-/* Private function prototypes -----------------------------------------------*/
-/** @defgroup FLASH_Private_Functions FLASH Private Functions
- * @{
- */
-static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data);
-static void FLASH_SetErrorCode(void);
-/**
- * @}
- */
-
-/* Exported functions ---------------------------------------------------------*/
-/** @defgroup FLASH_Exported_Functions FLASH Exported Functions
- * @{
- */
-
-/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions
- * @brief Programming operation functions
- *
-@verbatim
-@endverbatim
- * @{
- */
-
-/**
- * @brief Program halfword, word or double word at a specified address
- * @note The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
- * The function HAL_FLASH_Lock() should be called after to lock the FLASH interface
- *
- * @note If an erase and a program operations are requested simultaneously,
- * the erase operation is performed before the program one.
- *
- * @note FLASH should be previously erased before new programmation (only exception to this
- * is when 0x0000 is programmed)
- *
- * @param TypeProgram: Indicate the way to program at a specified address.
- * This parameter can be a value of @ref FLASH_Type_Program
- * @param Address: Specifies the address to be programmed.
- * @param Data: Specifies the data to be programmed
- *
- * @retval HAL_StatusTypeDef HAL Status
- */
-HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
-{
- HAL_StatusTypeDef status = HAL_ERROR;
- uint8_t index = 0;
- uint8_t nbiterations = 0;
-
- /* Process Locked */
- __HAL_LOCK(&pFlash);
-
- /* Check the parameters */
- assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
- assert_param(IS_FLASH_PROGRAM_ADDRESS(Address));
-
-#if defined(FLASH_BANK2_END)
- if(Address <= FLASH_BANK1_END)
- {
-#endif /* FLASH_BANK2_END */
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-#if defined(FLASH_BANK2_END)
- }
- else
- {
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE);
- }
-#endif /* FLASH_BANK2_END */
-
- if(status == HAL_OK)
- {
- if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD)
- {
- /* Program halfword (16-bit) at a specified address. */
- nbiterations = 1;
- }
- else if(TypeProgram == FLASH_TYPEPROGRAM_WORD)
- {
- /* Program word (32-bit = 2*16-bit) at a specified address. */
- nbiterations = 2;
- }
- else
- {
- /* Program double word (64-bit = 4*16-bit) at a specified address. */
- nbiterations = 4;
- }
-
- for (index = 0; index < nbiterations; index++)
- {
- FLASH_Program_HalfWord((Address + (2*index)), (uint16_t)(Data >> (16*index)));
-
-#if defined(FLASH_BANK2_END)
- if(Address <= FLASH_BANK1_END)
- {
-#endif /* FLASH_BANK2_END */
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- /* If the program operation is completed, disable the PG Bit */
- CLEAR_BIT(FLASH->CR, FLASH_CR_PG);
-#if defined(FLASH_BANK2_END)
- }
- else
- {
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE);
-
- /* If the program operation is completed, disable the PG Bit */
- CLEAR_BIT(FLASH->CR2, FLASH_CR2_PG);
- }
-#endif /* FLASH_BANK2_END */
- /* In case of error, stop programation procedure */
- if (status != HAL_OK)
- {
- break;
- }
- }
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(&pFlash);
-
- return status;
-}
-
-/**
- * @brief Program halfword, word or double word at a specified address with interrupt enabled.
- * @note The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
- * The function HAL_FLASH_Lock() should be called after to lock the FLASH interface
- *
- * @note If an erase and a program operations are requested simultaneously,
- * the erase operation is performed before the program one.
- *
- * @param TypeProgram: Indicate the way to program at a specified address.
- * This parameter can be a value of @ref FLASH_Type_Program
- * @param Address: Specifies the address to be programmed.
- * @param Data: Specifies the data to be programmed
- *
- * @retval HAL_StatusTypeDef HAL Status
- */
-HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- /* Process Locked */
- __HAL_LOCK(&pFlash);
-
- /* Check the parameters */
- assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
- assert_param(IS_FLASH_PROGRAM_ADDRESS(Address));
-
-#if defined(FLASH_BANK2_END)
- /* If procedure already ongoing, reject the next one */
- if (pFlash.ProcedureOnGoing != FLASH_PROC_NONE)
- {
- return HAL_ERROR;
- }
-
- if(Address <= FLASH_BANK1_END)
- {
- /* Enable End of FLASH Operation and Error source interrupts */
- __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP_BANK1 | FLASH_IT_ERR_BANK1);
-
- }else
- {
- /* Enable End of FLASH Operation and Error source interrupts */
- __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP_BANK2 | FLASH_IT_ERR_BANK2);
- }
-#else
- /* Enable End of FLASH Operation and Error source interrupts */
- __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR);
-#endif /* FLASH_BANK2_END */
-
- pFlash.Address = Address;
- pFlash.Data = Data;
-
- if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD)
- {
- pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMHALFWORD;
- /*Program halfword (16-bit) at a specified address.*/
- pFlash.DataRemaining = 1;
- }
- else if(TypeProgram == FLASH_TYPEPROGRAM_WORD)
- {
- pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMWORD;
- /*Program word (32-bit : 2*16-bit) at a specified address.*/
- pFlash.DataRemaining = 2;
- }
- else
- {
- pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMDOUBLEWORD;
- /*Program double word (64-bit : 4*16-bit) at a specified address.*/
- pFlash.DataRemaining = 4;
- }
-
- /*Program halfword (16-bit) at a specified address.*/
- FLASH_Program_HalfWord(Address, (uint16_t)Data);
-
- return status;
-}
-
-/**
- * @brief This function handles FLASH interrupt request.
- * @retval None
- */
-void HAL_FLASH_IRQHandler(void)
-{
- uint32_t addresstmp = 0;
-
- /* Check FLASH operation error flags */
-#if defined(FLASH_BANK2_END)
- if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR_BANK1) || __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR_BANK1) || \
- (__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR_BANK2) || __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR_BANK2)))
-#else
- if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) ||__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR))
-#endif /* FLASH_BANK2_END */
- {
- /*return the faulty address*/
- addresstmp = pFlash.Address;
- /* Reset address */
- pFlash.Address = 0xFFFFFFFF;
-
- /*Save the Error code*/
- FLASH_SetErrorCode();
-
- /* FLASH error interrupt user callback */
- HAL_FLASH_OperationErrorCallback(addresstmp);
-
- /* Stop the procedure ongoing*/
- pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
- }
-
- /* Check FLASH End of Operation flag */
-#if defined(FLASH_BANK2_END)
- if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP_BANK1))
- {
- /* Clear FLASH End of Operation pending bit */
- __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP_BANK1);
-#else
- if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP))
- {
- /* Clear FLASH End of Operation pending bit */
- __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
-#endif /* FLASH_BANK2_END */
-
- /* Process can continue only if no error detected */
- if(pFlash.ProcedureOnGoing != FLASH_PROC_NONE)
- {
- if(pFlash.ProcedureOnGoing == FLASH_PROC_PAGEERASE)
- {
- /* Nb of pages to erased can be decreased */
- pFlash.DataRemaining--;
-
- /* Check if there are still pages to erase*/
- if(pFlash.DataRemaining != 0)
- {
- addresstmp = pFlash.Address;
- /*Indicate user which sector has been erased*/
- HAL_FLASH_EndOfOperationCallback(addresstmp);
-
- /*Increment sector number*/
- addresstmp = pFlash.Address + FLASH_PAGE_SIZE;
- pFlash.Address = addresstmp;
-
- /* If the erase operation is completed, disable the PER Bit */
- CLEAR_BIT(FLASH->CR, FLASH_CR_PER);
-
- FLASH_PageErase(addresstmp);
- }
- else
- {
- /*No more pages to Erase, user callback can be called.*/
- /*Reset Sector and stop Erase pages procedure*/
- pFlash.Address = addresstmp = 0xFFFFFFFF;
- pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
- /* FLASH EOP interrupt user callback */
- HAL_FLASH_EndOfOperationCallback(addresstmp);
- }
- }
- else if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE)
- {
- /* Operation is completed, disable the MER Bit */
- CLEAR_BIT(FLASH->CR, FLASH_CR_MER);
-
-#if defined(FLASH_BANK2_END)
- /* Stop Mass Erase procedure if no pending mass erase on other bank */
- if (HAL_IS_BIT_CLR(FLASH->CR2, FLASH_CR2_MER))
- {
-#endif /* FLASH_BANK2_END */
- /* MassErase ended. Return the selected bank*/
- /* FLASH EOP interrupt user callback */
- HAL_FLASH_EndOfOperationCallback(0);
-
- /* Stop Mass Erase procedure*/
- pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
- }
-#if defined(FLASH_BANK2_END)
- }
-#endif /* FLASH_BANK2_END */
- else
- {
- /* Nb of 16-bit data to program can be decreased */
- pFlash.DataRemaining--;
-
- /* Check if there are still 16-bit data to program */
- if(pFlash.DataRemaining != 0)
- {
- /* Increment address to 16-bit */
- pFlash.Address += 2;
- addresstmp = pFlash.Address;
-
- /* Shift to have next 16-bit data */
- pFlash.Data = (pFlash.Data >> 16);
-
- /* Operation is completed, disable the PG Bit */
- CLEAR_BIT(FLASH->CR, FLASH_CR_PG);
-
- /*Program halfword (16-bit) at a specified address.*/
- FLASH_Program_HalfWord(addresstmp, (uint16_t)pFlash.Data);
- }
- else
- {
- /*Program ended. Return the selected address*/
- /* FLASH EOP interrupt user callback */
- if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMHALFWORD)
- {
- HAL_FLASH_EndOfOperationCallback(pFlash.Address);
- }
- else if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMWORD)
- {
- HAL_FLASH_EndOfOperationCallback(pFlash.Address - 2);
- }
- else
- {
- HAL_FLASH_EndOfOperationCallback(pFlash.Address - 6);
- }
-
- /* Reset Address and stop Program procedure*/
- pFlash.Address = 0xFFFFFFFF;
- pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
- }
- }
- }
- }
-
-#if defined(FLASH_BANK2_END)
- /* Check FLASH End of Operation flag */
- if(__HAL_FLASH_GET_FLAG( FLASH_FLAG_EOP_BANK2))
- {
- /* Clear FLASH End of Operation pending bit */
- __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP_BANK2);
-
- /* Process can continue only if no error detected */
- if(pFlash.ProcedureOnGoing != FLASH_PROC_NONE)
- {
- if(pFlash.ProcedureOnGoing == FLASH_PROC_PAGEERASE)
- {
- /* Nb of pages to erased can be decreased */
- pFlash.DataRemaining--;
-
- /* Check if there are still pages to erase*/
- if(pFlash.DataRemaining != 0)
- {
- /* Indicate user which page address has been erased*/
- HAL_FLASH_EndOfOperationCallback(pFlash.Address);
-
- /* Increment page address to next page */
- pFlash.Address += FLASH_PAGE_SIZE;
- addresstmp = pFlash.Address;
-
- /* Operation is completed, disable the PER Bit */
- CLEAR_BIT(FLASH->CR2, FLASH_CR2_PER);
-
- FLASH_PageErase(addresstmp);
- }
- else
- {
- /*No more pages to Erase*/
-
- /*Reset Address and stop Erase pages procedure*/
- pFlash.Address = 0xFFFFFFFF;
- pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
-
- /* FLASH EOP interrupt user callback */
- HAL_FLASH_EndOfOperationCallback(pFlash.Address);
- }
- }
- else if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE)
- {
- /* Operation is completed, disable the MER Bit */
- CLEAR_BIT(FLASH->CR2, FLASH_CR2_MER);
-
- if (HAL_IS_BIT_CLR(FLASH->CR, FLASH_CR_MER))
- {
- /* MassErase ended. Return the selected bank*/
- /* FLASH EOP interrupt user callback */
- HAL_FLASH_EndOfOperationCallback(0);
-
- pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
- }
- }
- else
- {
- /* Nb of 16-bit data to program can be decreased */
- pFlash.DataRemaining--;
-
- /* Check if there are still 16-bit data to program */
- if(pFlash.DataRemaining != 0)
- {
- /* Increment address to 16-bit */
- pFlash.Address += 2;
- addresstmp = pFlash.Address;
-
- /* Shift to have next 16-bit data */
- pFlash.Data = (pFlash.Data >> 16);
-
- /* Operation is completed, disable the PG Bit */
- CLEAR_BIT(FLASH->CR2, FLASH_CR2_PG);
-
- /*Program halfword (16-bit) at a specified address.*/
- FLASH_Program_HalfWord(addresstmp, (uint16_t)pFlash.Data);
- }
- else
- {
- /*Program ended. Return the selected address*/
- /* FLASH EOP interrupt user callback */
- if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMHALFWORD)
- {
- HAL_FLASH_EndOfOperationCallback(pFlash.Address);
- }
- else if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMWORD)
- {
- HAL_FLASH_EndOfOperationCallback(pFlash.Address-2);
- }
- else
- {
- HAL_FLASH_EndOfOperationCallback(pFlash.Address-6);
- }
-
- /* Reset Address and stop Program procedure*/
- pFlash.Address = 0xFFFFFFFF;
- pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
- }
- }
- }
- }
-#endif
-
- if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE)
- {
-#if defined(FLASH_BANK2_END)
- /* Operation is completed, disable the PG, PER and MER Bits for both bank */
- CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_PER | FLASH_CR_MER));
- CLEAR_BIT(FLASH->CR2, (FLASH_CR2_PG | FLASH_CR2_PER | FLASH_CR2_MER));
-
- /* Disable End of FLASH Operation and Error source interrupts for both banks */
- __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP_BANK1 | FLASH_IT_ERR_BANK1 | FLASH_IT_EOP_BANK2 | FLASH_IT_ERR_BANK2);
-#else
- /* Operation is completed, disable the PG, PER and MER Bits */
- CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_PER | FLASH_CR_MER));
-
- /* Disable End of FLASH Operation and Error source interrupts */
- __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR);
-#endif /* FLASH_BANK2_END */
-
- /* Process Unlocked */
- __HAL_UNLOCK(&pFlash);
- }
-}
-
-
-/**
- * @brief FLASH end of operation interrupt callback
- * @param ReturnValue: The value saved in this parameter depends on the ongoing procedure
- * - Mass Erase: No return value expected
- * - Pages Erase: Address of the page which has been erased
- * (if 0xFFFFFFFF, it means that all the selected pages have been erased)
- * - Program: Address which was selected for data program
- * @retval none
- */
-__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(ReturnValue);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_FLASH_EndOfOperationCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief FLASH operation error interrupt callback
- * @param ReturnValue: The value saved in this parameter depends on the ongoing procedure
- * - Mass Erase: No return value expected
- * - Pages Erase: Address of the page which returned an error
- * - Program: Address which was selected for data program
- * @retval none
- */
-__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(ReturnValue);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_FLASH_OperationErrorCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions
- * @brief management functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral Control functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to control the FLASH
- memory operations.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Unlock the FLASH control register access
- * @retval HAL Status
- */
-HAL_StatusTypeDef HAL_FLASH_Unlock(void)
-{
- if (HAL_IS_BIT_SET(FLASH->CR, FLASH_CR_LOCK))
- {
- /* Authorize the FLASH Registers access */
- WRITE_REG(FLASH->KEYR, FLASH_KEY1);
- WRITE_REG(FLASH->KEYR, FLASH_KEY2);
- }
- else
- {
- return HAL_ERROR;
- }
-
-#if defined(FLASH_BANK2_END)
- if (HAL_IS_BIT_SET(FLASH->CR2, FLASH_CR2_LOCK))
- {
- /* Authorize the FLASH BANK2 Registers access */
- WRITE_REG(FLASH->KEYR2, FLASH_KEY1);
- WRITE_REG(FLASH->KEYR2, FLASH_KEY2);
- }
- else
- {
- return HAL_ERROR;
- }
-
-#endif /* FLASH_BANK2_END */
- return HAL_OK;
-}
-
-/**
- * @brief Locks the FLASH control register access
- * @retval HAL Status
- */
-HAL_StatusTypeDef HAL_FLASH_Lock(void)
-{
- /* Set the LOCK Bit to lock the FLASH Registers access */
- SET_BIT(FLASH->CR, FLASH_CR_LOCK);
-
-#if defined(FLASH_BANK2_END)
- /* Set the LOCK Bit to lock the FLASH BANK2 Registers access */
- SET_BIT(FLASH->CR2, FLASH_CR2_LOCK);
-#endif /* FLASH_BANK2_END */
-
- return HAL_OK;
-}
-
-
-/**
- * @brief Unlock the FLASH Option Control Registers access.
- * @retval HAL Status
- */
-HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void)
-{
- if (HAL_IS_BIT_CLR(FLASH->CR, FLASH_CR_OPTWRE))
- {
- /* Authorizes the Option Byte register programming */
- WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY1);
- WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY2);
- }
- else
- {
- return HAL_ERROR;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Lock the FLASH Option Control Registers access.
- * @retval HAL Status
- */
-HAL_StatusTypeDef HAL_FLASH_OB_Lock(void)
-{
- /* Clear the OPTWRE Bit to lock the FLASH Option Byte Registers access */
- CLEAR_BIT(FLASH->CR, FLASH_CR_OPTWRE);
-
- return HAL_OK;
-}
-
-/**
- * @brief Launch the option byte loading.
- * @note This function will reset automatically the MCU.
- * @retval HAL_StatusTypeDef HAL Status
- */
-HAL_StatusTypeDef HAL_FLASH_OB_Launch(void)
-{
- /* Initiates a system reset request to launch the option byte loading */
- HAL_NVIC_SystemReset();
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State functions
- * @brief Peripheral State functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral State functions #####
- ===============================================================================
- [..]
- This subsection permit to get in run-time the status of the FLASH peripheral.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Get the specific FLASH error flag.
- * @retval FLASH_ErrorCode: The returned value can be:
- * @ref FLASH_Error_Codes
- */
-uint32_t HAL_FLASH_GetError(void)
-{
- return pFlash.ErrorCode;
-}
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/** @addtogroup FLASH_Private_Functions
- * @{
- */
-
-/**
- * @brief Program a half-word (16-bit) at a specified address.
- * @param Address: specifies the address to be programmed.
- * @param Data: specifies the data to be programmed.
- * @retval None
- */
-static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data)
-{
- /* Clean the error context */
- pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
-
-#if defined(FLASH_BANK2_END)
- if(Address <= FLASH_BANK1_END)
- {
-#endif /* FLASH_BANK2_END */
- /* Proceed to program the new data */
- SET_BIT(FLASH->CR, FLASH_CR_PG);
-#if defined(FLASH_BANK2_END)
- }
- else
- {
- /* Proceed to program the new data */
- SET_BIT(FLASH->CR2, FLASH_CR2_PG);
- }
-#endif /* FLASH_BANK2_END */
-
- /* Write data in the address */
- *(__IO uint16_t*)Address = Data;
-}
-
-/**
- * @brief Wait for a FLASH operation to complete.
- * @param Timeout: maximum flash operation timeout
- * @retval HAL_StatusTypeDef HAL Status
- */
-HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout)
-{
- /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset.
- Even if the FLASH operation fails, the BUSY flag will be reset and an error
- flag will be set */
-
- uint32_t tickstart = HAL_GetTick();
-
- while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY))
- {
- if (Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0) || ((HAL_GetTick()-tickstart) > Timeout))
- {
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Check FLASH End of Operation flag */
- if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP))
- {
- /* Clear FLASH End of Operation pending bit */
- __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
- }
-
- if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) ||
- __HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERR) ||
- __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR))
- {
- /*Save the error code*/
- FLASH_SetErrorCode();
- return HAL_ERROR;
- }
-
- /* If there is no error flag set */
- return HAL_OK;
-}
-
-#if defined(FLASH_BANK2_END)
-/**
- * @brief Wait for a FLASH BANK2 operation to complete.
- * @param Timeout: maximum flash operation timeout
- * @retval HAL_StatusTypeDef HAL Status
- */
-HAL_StatusTypeDef FLASH_WaitForLastOperationBank2(uint32_t Timeout)
-{
- /* Wait for the FLASH BANK2 operation to complete by polling on BUSY flag to be reset.
- Even if the FLASH BANK2 operation fails, the BUSY flag will be reset and an error
- flag will be set */
-
- uint32_t tickstart = HAL_GetTick();
-
- while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY_BANK2))
- {
- if (Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0) || ((HAL_GetTick()-tickstart) > Timeout))
- {
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Check FLASH End of Operation flag */
- if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP_BANK2))
- {
- /* Clear FLASH End of Operation pending bit */
- __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP_BANK2);
- }
-
- if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR_BANK2) || __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR_BANK2))
- {
- /*Save the error code*/
- FLASH_SetErrorCode();
- return HAL_ERROR;
- }
-
- /* If there is an error flag set */
- return HAL_OK;
-
-}
-#endif /* FLASH_BANK2_END */
-
-/**
- * @brief Set the specific FLASH error flag.
- * @retval None
- */
-static void FLASH_SetErrorCode(void)
-{
-#if defined(FLASH_BANK2_END)
- if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) || __HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR_BANK2))
-#else
- if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR))
-#endif /* FLASH_BANK2_END */
- {
- pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP;
- }
-#if defined(FLASH_BANK2_END)
- if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR) || __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR_BANK2))
-#else
- if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR))
-#endif /* FLASH_BANK2_END */
- {
- pFlash.ErrorCode |= HAL_FLASH_ERROR_PROG;
- }
-
- if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERR))
- {
- pFlash.ErrorCode |= HAL_FLASH_ERROR_OPTV;
- __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_OPTVERR);
- }
-
- /* Clear FLASH error pending bits */
-#if defined(FLASH_BANK2_END)
- __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_WRPERR | FLASH_FLAG_WRPERR_BANK2 | FLASH_FLAG_PGERR | FLASH_FLAG_PGERR_BANK2);
-#else
- __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_WRPERR | FLASH_FLAG_PGERR);
-#endif /* FLASH_BANK2_END */
-}
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c
deleted file mode 100644
index 0416efe..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c
+++ /dev/null
@@ -1,1140 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_flash_ex.c
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief Extended FLASH HAL module driver.
- *
- * This file provides firmware functions to manage the following
- * functionalities of the FLASH peripheral:
- * + Extended Initialization/de-initialization functions
- * + Extended I/O operation functions
- * + Extended Peripheral Control functions
- *
- @verbatim
- ==============================================================================
- ##### Flash peripheral extended features #####
- ==============================================================================
-
- ##### How to use this driver #####
- ==============================================================================
- [..] This driver provides functions to configure and program the FLASH memory
- of all STM32F1xxx devices. It includes
-
- (++) Set/Reset the write protection
- (++) Program the user Option Bytes
- (++) Get the Read protection Level
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-#ifdef HAL_FLASH_MODULE_ENABLED
-
-/** @addtogroup FLASH
- * @{
- */
-/** @addtogroup FLASH_Private_Variables
- * @{
- */
-/* Variables used for Erase pages under interruption*/
-extern FLASH_ProcessTypeDef pFlash;
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/** @defgroup FLASHEx FLASHEx
- * @brief FLASH HAL Extension module driver
- * @{
- */
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @defgroup FLASHEx_Private_Constants FLASHEx Private Constants
- * @{
- */
-#define FLASH_POSITION_IWDGSW_BIT (uint32_t)POSITION_VAL(FLASH_OBR_IWDG_SW)
-#define FLASH_POSITION_OB_USERDATA0_BIT (uint32_t)POSITION_VAL(FLASH_OBR_DATA0)
-#define FLASH_POSITION_OB_USERDATA1_BIT (uint32_t)POSITION_VAL(FLASH_OBR_DATA1)
-/**
- * @}
- */
-
-/* Private macro -------------------------------------------------------------*/
-/** @defgroup FLASHEx_Private_Macros FLASHEx Private Macros
- * @{
- */
-/**
- * @}
- */
-
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions
- * @{
- */
-/* Erase operations */
-static void FLASH_MassErase(uint32_t Banks);
-
-/* Option bytes control */
-static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WriteProtectPage);
-static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WriteProtectPage);
-static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel);
-static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t UserConfig);
-static HAL_StatusTypeDef FLASH_OB_ProgramData(uint32_t Address, uint8_t Data);
-static uint32_t FLASH_OB_GetWRP(void);
-static uint32_t FLASH_OB_GetRDP(void);
-static uint8_t FLASH_OB_GetUser(void);
-
-/**
- * @}
- */
-
-/* Exported functions ---------------------------------------------------------*/
-/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions
- * @{
- */
-
-/** @defgroup FLASHEx_Exported_Functions_Group1 FLASHEx Memory Erasing functions
- * @brief FLASH Memory Erasing functions
- *
-@verbatim
- ==============================================================================
- ##### FLASH Erasing Programming functions #####
- ==============================================================================
-
- [..] The FLASH Memory Erasing functions, includes the following functions:
- (+) @ref HAL_FLASHEx_Erase: return only when erase has been done
- (+) @ref HAL_FLASHEx_Erase_IT: end of erase is done when @ref HAL_FLASH_EndOfOperationCallback
- is called with parameter 0xFFFFFFFF
-
- [..] Any operation of erase should follow these steps:
- (#) Call the @ref HAL_FLASH_Unlock() function to enable the flash control register and
- program memory access.
- (#) Call the desired function to erase page.
- (#) Call the @ref HAL_FLASH_Lock() to disable the flash program memory access
- (recommended to protect the FLASH memory against possible unwanted operation).
-
-@endverbatim
- * @{
- */
-
-
-/**
- * @brief Perform a mass erase or erase the specified FLASH memory pages
- * @note To correctly run this function, the @ref HAL_FLASH_Unlock() function
- * must be called before.
- * Call the @ref HAL_FLASH_Lock() to disable the flash memory access
- * (recommended to protect the FLASH memory against possible unwanted operation)
- * @param[in] pEraseInit pointer to an FLASH_EraseInitTypeDef structure that
- * contains the configuration information for the erasing.
- *
- * @param[out] PageError pointer to variable that
- * contains the configuration information on faulty page in case of error
- * (0xFFFFFFFF means that all the pages have been correctly erased)
- *
- * @retval HAL_StatusTypeDef HAL Status
- */
-HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError)
-{
- HAL_StatusTypeDef status = HAL_ERROR;
- uint32_t address = 0;
-
- /* Process Locked */
- __HAL_LOCK(&pFlash);
-
- /* Check the parameters */
- assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));
-
- if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE)
- {
-#if defined(FLASH_BANK2_END)
- if (pEraseInit->Banks == FLASH_BANK_BOTH)
- {
- /* Mass Erase requested for Bank1 and Bank2 */
- /* Wait for last operation to be completed */
- if ((FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) && \
- (FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK))
- {
- /*Mass erase to be done*/
- FLASH_MassErase(FLASH_BANK_BOTH);
-
- /* Wait for last operation to be completed */
- if ((FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) && \
- (FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK))
- {
- status = HAL_OK;
- }
-
- /* If the erase operation is completed, disable the MER Bit */
- CLEAR_BIT(FLASH->CR, FLASH_CR_MER);
- CLEAR_BIT(FLASH->CR2, FLASH_CR2_MER);
- }
- }
- else if (pEraseInit->Banks == FLASH_BANK_2)
- {
- /* Mass Erase requested for Bank2 */
- /* Wait for last operation to be completed */
- if (FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK)
- {
- /*Mass erase to be done*/
- FLASH_MassErase(FLASH_BANK_2);
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE);
-
- /* If the erase operation is completed, disable the MER Bit */
- CLEAR_BIT(FLASH->CR2, FLASH_CR2_MER);
- }
- }
- else
-#endif /* FLASH_BANK2_END */
- {
- /* Mass Erase requested for Bank1 */
- /* Wait for last operation to be completed */
- if (FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK)
- {
- /*Mass erase to be done*/
- FLASH_MassErase(FLASH_BANK_1);
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- /* If the erase operation is completed, disable the MER Bit */
- CLEAR_BIT(FLASH->CR, FLASH_CR_MER);
- }
- }
- }
- else
- {
- /* Page Erase is requested */
- /* Check the parameters */
- assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress));
- assert_param(IS_FLASH_NB_PAGES(pEraseInit->PageAddress, pEraseInit->NbPages));
-
-#if defined(FLASH_BANK2_END)
- /* Page Erase requested on address located on bank2 */
- if(pEraseInit->PageAddress > FLASH_BANK1_END)
- {
- /* Wait for last operation to be completed */
- if (FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK)
- {
- /*Initialization of PageError variable*/
- *PageError = 0xFFFFFFFF;
-
- /* Erase by page by page to be done*/
- for(address = pEraseInit->PageAddress;
- address < (pEraseInit->PageAddress + (pEraseInit->NbPages)*FLASH_PAGE_SIZE);
- address += FLASH_PAGE_SIZE)
- {
- FLASH_PageErase(address);
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE);
-
- /* If the erase operation is completed, disable the PER Bit */
- CLEAR_BIT(FLASH->CR2, FLASH_CR2_PER);
-
- if (status != HAL_OK)
- {
- /* In case of error, stop erase procedure and return the faulty address */
- *PageError = address;
- break;
- }
- }
- }
- }
- else
-#endif /* FLASH_BANK2_END */
- {
- /* Page Erase requested on address located on bank1 */
- /* Wait for last operation to be completed */
- if (FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK)
- {
- /*Initialization of PageError variable*/
- *PageError = 0xFFFFFFFF;
-
- /* Erase page by page to be done*/
- for(address = pEraseInit->PageAddress;
- address < ((pEraseInit->NbPages * FLASH_PAGE_SIZE) + pEraseInit->PageAddress);
- address += FLASH_PAGE_SIZE)
- {
- FLASH_PageErase(address);
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- /* If the erase operation is completed, disable the PER Bit */
- CLEAR_BIT(FLASH->CR, FLASH_CR_PER);
-
- if (status != HAL_OK)
- {
- /* In case of error, stop erase procedure and return the faulty address */
- *PageError = address;
- break;
- }
- }
- }
- }
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(&pFlash);
-
- return status;
-}
-
-/**
- * @brief Perform a mass erase or erase the specified FLASH memory pages with interrupt enabled
- * @note To correctly run this function, the @ref HAL_FLASH_Unlock() function
- * must be called before.
- * Call the @ref HAL_FLASH_Lock() to disable the flash memory access
- * (recommended to protect the FLASH memory against possible unwanted operation)
- * @param pEraseInit pointer to an FLASH_EraseInitTypeDef structure that
- * contains the configuration information for the erasing.
- *
- * @retval HAL_StatusTypeDef HAL Status
- */
-HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- /* Process Locked */
- __HAL_LOCK(&pFlash);
-
- /* If procedure already ongoing, reject the next one */
- if (pFlash.ProcedureOnGoing != FLASH_PROC_NONE)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));
-
- /* Enable End of FLASH Operation and Error source interrupts */
- __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR);
-
-#if defined(FLASH_BANK2_END)
- /* Enable End of FLASH Operation and Error source interrupts */
- __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP_BANK2 | FLASH_IT_ERR_BANK2);
-
-#endif
- if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE)
- {
- /*Mass erase to be done*/
- pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE;
- FLASH_MassErase(pEraseInit->Banks);
- }
- else
- {
- /* Erase by page to be done*/
-
- /* Check the parameters */
- assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress));
- assert_param(IS_FLASH_NB_PAGES(pEraseInit->PageAddress, pEraseInit->NbPages));
-
- pFlash.ProcedureOnGoing = FLASH_PROC_PAGEERASE;
- pFlash.DataRemaining = pEraseInit->NbPages;
- pFlash.Address = pEraseInit->PageAddress;
-
- /*Erase 1st page and wait for IT*/
- FLASH_PageErase(pEraseInit->PageAddress);
- }
-
- return status;
-}
-
-/**
- * @}
- */
-
-/** @defgroup FLASHEx_Exported_Functions_Group2 Option Bytes Programming functions
- * @brief Option Bytes Programming functions
- *
-@verbatim
- ==============================================================================
- ##### Option Bytes Programming functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to control the FLASH
- option bytes operations.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Erases the FLASH option bytes.
- * @note This functions erases all option bytes except the Read protection (RDP).
- * The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
- * The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes
- * The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes
- * (system reset will occur)
- * @retval HAL status
- */
-
-HAL_StatusTypeDef HAL_FLASHEx_OBErase(void)
-{
- uint8_t rdptmp = OB_RDP_LEVEL_0;
- HAL_StatusTypeDef status = HAL_ERROR;
-
- /* Get the actual read protection Option Byte value */
- rdptmp = FLASH_OB_GetRDP();
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- if(status == HAL_OK)
- {
- /* Clean the error context */
- pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
-
- /* If the previous operation is completed, proceed to erase the option bytes */
- SET_BIT(FLASH->CR, FLASH_CR_OPTER);
- SET_BIT(FLASH->CR, FLASH_CR_STRT);
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- /* If the erase operation is completed, disable the OPTER Bit */
- CLEAR_BIT(FLASH->CR, FLASH_CR_OPTER);
-
- if(status == HAL_OK)
- {
- /* Restore the last read protection Option Byte value */
- status = FLASH_OB_RDP_LevelConfig(rdptmp);
- }
- }
-
- /* Return the erase status */
- return status;
-}
-
-/**
- * @brief Program option bytes
- * @note The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
- * The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes
- * The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes
- * (system reset will occur)
- *
- * @param pOBInit pointer to an FLASH_OBInitStruct structure that
- * contains the configuration information for the programming.
- *
- * @retval HAL_StatusTypeDef HAL Status
- */
-HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit)
-{
- HAL_StatusTypeDef status = HAL_ERROR;
-
- /* Process Locked */
- __HAL_LOCK(&pFlash);
-
- /* Check the parameters */
- assert_param(IS_OPTIONBYTE(pOBInit->OptionType));
-
- /* Write protection configuration */
- if((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP)
- {
- assert_param(IS_WRPSTATE(pOBInit->WRPState));
- if (pOBInit->WRPState == OB_WRPSTATE_ENABLE)
- {
- /* Enable of Write protection on the selected page */
- status = FLASH_OB_EnableWRP(pOBInit->WRPPage);
- }
- else
- {
- /* Disable of Write protection on the selected page */
- status = FLASH_OB_DisableWRP(pOBInit->WRPPage);
- }
- if (status != HAL_OK)
- {
- /* Process Unlocked */
- __HAL_UNLOCK(&pFlash);
- return status;
- }
- }
-
- /* Read protection configuration */
- if((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP)
- {
- status = FLASH_OB_RDP_LevelConfig(pOBInit->RDPLevel);
- if (status != HAL_OK)
- {
- /* Process Unlocked */
- __HAL_UNLOCK(&pFlash);
- return status;
- }
- }
-
- /* USER configuration */
- if((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER)
- {
- status = FLASH_OB_UserConfig(pOBInit->USERConfig);
- if (status != HAL_OK)
- {
- /* Process Unlocked */
- __HAL_UNLOCK(&pFlash);
- return status;
- }
- }
-
- /* DATA configuration*/
- if((pOBInit->OptionType & OPTIONBYTE_DATA) == OPTIONBYTE_DATA)
- {
- status = FLASH_OB_ProgramData(pOBInit->DATAAddress, pOBInit->DATAData);
- if (status != HAL_OK)
- {
- /* Process Unlocked */
- __HAL_UNLOCK(&pFlash);
- return status;
- }
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(&pFlash);
-
- return status;
-}
-
-/**
- * @brief Get the Option byte configuration
- * @param pOBInit pointer to an FLASH_OBInitStruct structure that
- * contains the configuration information for the programming.
- *
- * @retval None
- */
-void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit)
-{
- pOBInit->OptionType = OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER;
-
- /*Get WRP*/
- pOBInit->WRPPage = FLASH_OB_GetWRP();
-
- /*Get RDP Level*/
- pOBInit->RDPLevel = FLASH_OB_GetRDP();
-
- /*Get USER*/
- pOBInit->USERConfig = FLASH_OB_GetUser();
-}
-
-/**
- * @brief Get the Option byte user data
- * @param DATAAdress Address of the option byte DATA
- * This parameter can be one of the following values:
- * @arg @ref OB_DATA_ADDRESS_DATA0
- * @arg @ref OB_DATA_ADDRESS_DATA1
- * @retval Value programmed in USER data
- */
-uint32_t HAL_FLASHEx_OBGetUserData(uint32_t DATAAdress)
-{
- uint32_t value = 0;
-
- if (DATAAdress == OB_DATA_ADDRESS_DATA0)
- {
- /* Get value programmed in OB USER Data0 */
- value = READ_BIT(FLASH->OBR, FLASH_OBR_DATA0) >> FLASH_POSITION_OB_USERDATA0_BIT;
- }
- else
- {
- /* Get value programmed in OB USER Data1 */
- value = READ_BIT(FLASH->OBR, FLASH_OBR_DATA1) >> FLASH_POSITION_OB_USERDATA1_BIT;
- }
-
- return value;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/** @addtogroup FLASHEx_Private_Functions
- * @{
- */
-
-/**
- * @brief Full erase of FLASH memory Bank
- * @param Banks Banks to be erased
- * This parameter can be one of the following values:
- * @arg @ref FLASH_BANK_1 Bank1 to be erased
- @if STM32F101xG
- * @arg @ref FLASH_BANK_2 Bank2 to be erased
- * @arg @ref FLASH_BANK_BOTH Bank1 and Bank2 to be erased
- @endif
- @if STM32F103xG
- * @arg @ref FLASH_BANK_2 Bank2 to be erased
- * @arg @ref FLASH_BANK_BOTH Bank1 and Bank2 to be erased
- @endif
- *
- * @retval None
- */
-static void FLASH_MassErase(uint32_t Banks)
-{
- /* Check the parameters */
- assert_param(IS_FLASH_BANK(Banks));
-
- /* Clean the error context */
- pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
-
-#if defined(FLASH_BANK2_END)
- if(Banks == FLASH_BANK_BOTH)
- {
- /* bank1 & bank2 will be erased*/
- SET_BIT(FLASH->CR, FLASH_CR_MER);
- SET_BIT(FLASH->CR2, FLASH_CR2_MER);
- SET_BIT(FLASH->CR, FLASH_CR_STRT);
- SET_BIT(FLASH->CR2, FLASH_CR2_STRT);
- }
- else if(Banks == FLASH_BANK_2)
- {
- /*Only bank2 will be erased*/
- SET_BIT(FLASH->CR2, FLASH_CR2_MER);
- SET_BIT(FLASH->CR2, FLASH_CR2_STRT);
- }
- else
- {
-#endif /* FLASH_BANK2_END */
- /* Only bank1 will be erased*/
- SET_BIT(FLASH->CR, FLASH_CR_MER);
- SET_BIT(FLASH->CR, FLASH_CR_STRT);
-#if defined(FLASH_BANK2_END)
- }
-#endif /* FLASH_BANK2_END */
-}
-
-/**
- * @brief Enable the write protection of the desired pages
- * @note An option byte erase is done automatically in this function.
- * @note When the memory read protection level is selected (RDP level = 1),
- * it is not possible to program or erase the flash page i if
- * debug features are connected or boot code is executed in RAM, even if nWRPi = 1
- *
- * @param WriteProtectPage specifies the page(s) to be write protected.
- * The value of this parameter depend on device used within the same series
- * @retval HAL status
- */
-static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WriteProtectPage)
-{
- HAL_StatusTypeDef status = HAL_OK;
- uint16_t WRP0_Data = 0xFFFF;
-#if defined(FLASH_WRP1_WRP1)
- uint16_t WRP1_Data = 0xFFFF;
-#endif /* FLASH_WRP1_WRP1 */
-#if defined(FLASH_WRP2_WRP2)
- uint16_t WRP2_Data = 0xFFFF;
-#endif /* FLASH_WRP2_WRP2 */
-#if defined(FLASH_WRP3_WRP3)
- uint16_t WRP3_Data = 0xFFFF;
-#endif /* FLASH_WRP3_WRP3 */
-
- /* Check the parameters */
- assert_param(IS_OB_WRP(WriteProtectPage));
-
- /* Get current write protected pages and the new pages to be protected ******/
- WriteProtectPage = (uint32_t)(~((~FLASH_OB_GetWRP()) | WriteProtectPage));
-
-#if defined(OB_WRP_PAGES0TO15MASK)
- WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO15MASK);
-#elif defined(OB_WRP_PAGES0TO31MASK)
- WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO31MASK);
-#endif /* OB_WRP_PAGES0TO31MASK */
-
-#if defined(OB_WRP_PAGES16TO31MASK)
- WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES16TO31MASK) >> 8);
-#elif defined(OB_WRP_PAGES32TO63MASK)
- WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO63MASK) >> 8);
-#endif /* OB_WRP_PAGES32TO63MASK */
-
-#if defined(OB_WRP_PAGES64TO95MASK)
- WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES64TO95MASK) >> 16);
-#endif /* OB_WRP_PAGES64TO95MASK */
-#if defined(OB_WRP_PAGES32TO47MASK)
- WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO47MASK) >> 16);
-#endif /* OB_WRP_PAGES32TO47MASK */
-
-#if defined(OB_WRP_PAGES96TO127MASK)
- WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES96TO127MASK) >> 24);
-#elif defined(OB_WRP_PAGES48TO255MASK)
- WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO255MASK) >> 24);
-#elif defined(OB_WRP_PAGES48TO511MASK)
- WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO511MASK) >> 24);
-#elif defined(OB_WRP_PAGES48TO127MASK)
- WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO127MASK) >> 24);
-#endif /* OB_WRP_PAGES96TO127MASK */
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- if(status == HAL_OK)
- {
- /* Clean the error context */
- pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
-
- /* To be able to write again option byte, need to perform a option byte erase */
- status = HAL_FLASHEx_OBErase();
- if (status == HAL_OK)
- {
- /* Enable write protection */
- SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
-
-#if defined(FLASH_WRP0_WRP0)
- if(WRP0_Data != 0xFF)
- {
- OB->WRP0 &= WRP0_Data;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
- }
-#endif /* FLASH_WRP0_WRP0 */
-
-#if defined(FLASH_WRP1_WRP1)
- if((status == HAL_OK) && (WRP1_Data != 0xFF))
- {
- OB->WRP1 &= WRP1_Data;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
- }
-#endif /* FLASH_WRP1_WRP1 */
-
-#if defined(FLASH_WRP2_WRP2)
- if((status == HAL_OK) && (WRP2_Data != 0xFF))
- {
- OB->WRP2 &= WRP2_Data;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
- }
-#endif /* FLASH_WRP2_WRP2 */
-
-#if defined(FLASH_WRP3_WRP3)
- if((status == HAL_OK) && (WRP3_Data != 0xFF))
- {
- OB->WRP3 &= WRP3_Data;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
- }
-#endif /* FLASH_WRP3_WRP3 */
-
- /* if the program operation is completed, disable the OPTPG Bit */
- CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
- }
- }
-
- return status;
-}
-
-/**
- * @brief Disable the write protection of the desired pages
- * @note An option byte erase is done automatically in this function.
- * @note When the memory read protection level is selected (RDP level = 1),
- * it is not possible to program or erase the flash page i if
- * debug features are connected or boot code is executed in RAM, even if nWRPi = 1
- *
- * @param WriteProtectPage specifies the page(s) to be write unprotected.
- * The value of this parameter depend on device used within the same series
- * @retval HAL status
- */
-static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WriteProtectPage)
-{
- HAL_StatusTypeDef status = HAL_OK;
- uint16_t WRP0_Data = 0xFFFF;
-#if defined(FLASH_WRP1_WRP1)
- uint16_t WRP1_Data = 0xFFFF;
-#endif /* FLASH_WRP1_WRP1 */
-#if defined(FLASH_WRP2_WRP2)
- uint16_t WRP2_Data = 0xFFFF;
-#endif /* FLASH_WRP2_WRP2 */
-#if defined(FLASH_WRP3_WRP3)
- uint16_t WRP3_Data = 0xFFFF;
-#endif /* FLASH_WRP3_WRP3 */
-
- /* Check the parameters */
- assert_param(IS_OB_WRP(WriteProtectPage));
-
- /* Get current write protected pages and the new pages to be unprotected ******/
- WriteProtectPage = (FLASH_OB_GetWRP() | WriteProtectPage);
-
-#if defined(OB_WRP_PAGES0TO15MASK)
- WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO15MASK);
-#elif defined(OB_WRP_PAGES0TO31MASK)
- WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO31MASK);
-#endif /* OB_WRP_PAGES0TO31MASK */
-
-#if defined(OB_WRP_PAGES16TO31MASK)
- WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES16TO31MASK) >> 8);
-#elif defined(OB_WRP_PAGES32TO63MASK)
- WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO63MASK) >> 8);
-#endif /* OB_WRP_PAGES32TO63MASK */
-
-#if defined(OB_WRP_PAGES64TO95MASK)
- WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES64TO95MASK) >> 16);
-#endif /* OB_WRP_PAGES64TO95MASK */
-#if defined(OB_WRP_PAGES32TO47MASK)
- WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO47MASK) >> 16);
-#endif /* OB_WRP_PAGES32TO47MASK */
-
-#if defined(OB_WRP_PAGES96TO127MASK)
- WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES96TO127MASK) >> 24);
-#elif defined(OB_WRP_PAGES48TO255MASK)
- WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO255MASK) >> 24);
-#elif defined(OB_WRP_PAGES48TO511MASK)
- WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO511MASK) >> 24);
-#elif defined(OB_WRP_PAGES48TO127MASK)
- WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO127MASK) >> 24);
-#endif /* OB_WRP_PAGES96TO127MASK */
-
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- if(status == HAL_OK)
- {
- /* Clean the error context */
- pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
-
- /* To be able to write again option byte, need to perform a option byte erase */
- status = HAL_FLASHEx_OBErase();
- if (status == HAL_OK)
- {
- SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
-
-#if defined(FLASH_WRP0_WRP0)
- if(WRP0_Data != 0xFF)
- {
- OB->WRP0 |= WRP0_Data;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
- }
-#endif /* FLASH_WRP0_WRP0 */
-
-#if defined(FLASH_WRP1_WRP1)
- if((status == HAL_OK) && (WRP1_Data != 0xFF))
- {
- OB->WRP1 |= WRP1_Data;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
- }
-#endif /* FLASH_WRP1_WRP1 */
-
-#if defined(FLASH_WRP2_WRP2)
- if((status == HAL_OK) && (WRP2_Data != 0xFF))
- {
- OB->WRP2 |= WRP2_Data;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
- }
-#endif /* FLASH_WRP2_WRP2 */
-
-#if defined(FLASH_WRP3_WRP3)
- if((status == HAL_OK) && (WRP3_Data != 0xFF))
- {
- OB->WRP3 |= WRP3_Data;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
- }
-#endif /* FLASH_WRP3_WRP3 */
-
- /* if the program operation is completed, disable the OPTPG Bit */
- CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
- }
- }
- return status;
-}
-
-/**
- * @brief Set the read protection level.
- * @param ReadProtectLevel specifies the read protection level.
- * This parameter can be one of the following values:
- * @arg @ref OB_RDP_LEVEL_0 No protection
- * @arg @ref OB_RDP_LEVEL_1 Read protection of the memory
- * @retval HAL status
- */
-static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- /* Check the parameters */
- assert_param(IS_OB_RDP_LEVEL(ReadProtectLevel));
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- if(status == HAL_OK)
- {
- /* Clean the error context */
- pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
-
- /* If the previous operation is completed, proceed to erase the option bytes */
- SET_BIT(FLASH->CR, FLASH_CR_OPTER);
- SET_BIT(FLASH->CR, FLASH_CR_STRT);
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- /* If the erase operation is completed, disable the OPTER Bit */
- CLEAR_BIT(FLASH->CR, FLASH_CR_OPTER);
-
- if(status == HAL_OK)
- {
- /* Enable the Option Bytes Programming operation */
- SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
-
- WRITE_REG(OB->RDP, ReadProtectLevel);
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- /* if the program operation is completed, disable the OPTPG Bit */
- CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
- }
- }
-
- return status;
-}
-
-/**
- * @brief Program the FLASH User Option Byte.
- * @note Programming of the OB should be performed only after an erase (otherwise PGERR occurs)
- * @param UserConfig The FLASH User Option Bytes values FLASH_OBR_IWDG_SW(Bit2),
- * FLASH_OBR_nRST_STOP(Bit3),FLASH_OBR_nRST_STDBY(Bit4).
- * And BFBF2(Bit5) for STM32F101xG and STM32F103xG .
- * @retval HAL status
- */
-static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t UserConfig)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- /* Check the parameters */
- assert_param(IS_OB_IWDG_SOURCE((UserConfig&OB_IWDG_SW)));
- assert_param(IS_OB_STOP_SOURCE((UserConfig&OB_STOP_NO_RST)));
- assert_param(IS_OB_STDBY_SOURCE((UserConfig&OB_STDBY_NO_RST)));
-#if defined(FLASH_BANK2_END)
- assert_param(IS_OB_BOOT1((UserConfig&OB_BOOT1_SET)));
-#endif /* FLASH_BANK2_END */
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- if(status == HAL_OK)
- {
- /* Clean the error context */
- pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
-
- /* Enable the Option Bytes Programming operation */
- SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
-
-#if defined(FLASH_BANK2_END)
- OB->USER = (UserConfig | 0xF0);
-#else
- OB->USER = (UserConfig | 0x88);
-#endif /* FLASH_BANK2_END */
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- /* if the program operation is completed, disable the OPTPG Bit */
- CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
- }
-
- return status;
-}
-
-/**
- * @brief Programs a half word at a specified Option Byte Data address.
- * @note The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface
- * The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes
- * The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes
- * (system reset will occur)
- * Programming of the OB should be performed only after an erase (otherwise PGERR occurs)
- * @param Address specifies the address to be programmed.
- * This parameter can be 0x1FFFF804 or 0x1FFFF806.
- * @param Data specifies the data to be programmed.
- * @retval HAL status
- */
-static HAL_StatusTypeDef FLASH_OB_ProgramData(uint32_t Address, uint8_t Data)
-{
- HAL_StatusTypeDef status = HAL_ERROR;
-
- /* Check the parameters */
- assert_param(IS_OB_DATA_ADDRESS(Address));
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- if(status == HAL_OK)
- {
- /* Clean the error context */
- pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
-
- /* Enables the Option Bytes Programming operation */
- SET_BIT(FLASH->CR, FLASH_CR_OPTPG);
- *(__IO uint16_t*)Address = Data;
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- /* If the program operation is completed, disable the OPTPG Bit */
- CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG);
- }
- /* Return the Option Byte Data Program Status */
- return status;
-}
-
-/**
- * @brief Return the FLASH Write Protection Option Bytes value.
- * @retval The FLASH Write Protection Option Bytes value
- */
-static uint32_t FLASH_OB_GetWRP(void)
-{
- /* Return the FLASH write protection Register value */
- return (uint32_t)(READ_REG(FLASH->WRPR));
-}
-
-/**
- * @brief Returns the FLASH Read Protection level.
- * @retval FLASH ReadOut Protection Status:
- * This parameter can be one of the following values:
- * @arg @ref OB_RDP_LEVEL_0 No protection
- * @arg @ref OB_RDP_LEVEL_1 Read protection of the memory
- */
-static uint32_t FLASH_OB_GetRDP(void)
-{
- uint32_t readstatus = OB_RDP_LEVEL_0;
- uint32_t tmp_reg = 0;
-
- /* Read RDP level bits */
- tmp_reg = READ_BIT(FLASH->OBR, FLASH_OBR_RDPRT);
-
- if (tmp_reg == FLASH_OBR_RDPRT)
- {
- readstatus = OB_RDP_LEVEL_1;
- }
- else
- {
- readstatus = OB_RDP_LEVEL_0;
- }
-
- return readstatus;
-}
-
-/**
- * @brief Return the FLASH User Option Byte value.
- * @retval The FLASH User Option Bytes values: FLASH_OBR_IWDG_SW(Bit2),
- * FLASH_OBR_nRST_STOP(Bit3),FLASH_OBR_nRST_STDBY(Bit4).
- * And FLASH_OBR_BFB2(Bit5) for STM32F101xG and STM32F103xG .
- */
-static uint8_t FLASH_OB_GetUser(void)
-{
- /* Return the User Option Byte */
- return (uint8_t)((READ_REG(FLASH->OBR) & FLASH_OBR_USER) >> FLASH_POSITION_IWDGSW_BIT);
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/** @addtogroup FLASH
- * @{
- */
-
-/** @addtogroup FLASH_Private_Functions
- * @{
- */
-
-/**
- * @brief Erase the specified FLASH memory page
- * @param PageAddress FLASH page to erase
- * The value of this parameter depend on device used within the same series
- *
- * @retval None
- */
-void FLASH_PageErase(uint32_t PageAddress)
-{
- /* Clean the error context */
- pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
-
-#if defined(FLASH_BANK2_END)
- if(PageAddress > FLASH_BANK1_END)
- {
- /* Proceed to erase the page */
- SET_BIT(FLASH->CR2, FLASH_CR2_PER);
- WRITE_REG(FLASH->AR2, PageAddress);
- SET_BIT(FLASH->CR2, FLASH_CR2_STRT);
- }
- else
- {
-#endif /* FLASH_BANK2_END */
- /* Proceed to erase the page */
- SET_BIT(FLASH->CR, FLASH_CR_PER);
- WRITE_REG(FLASH->AR, PageAddress);
- SET_BIT(FLASH->CR, FLASH_CR_STRT);
-#if defined(FLASH_BANK2_END)
- }
-#endif /* FLASH_BANK2_END */
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* HAL_FLASH_MODULE_ENABLED */
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c
deleted file mode 100644
index 4e7c78a..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c
+++ /dev/null
@@ -1,597 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_gpio.c
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief GPIO HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the General Purpose Input/Output (GPIO) peripheral:
- * + Initialization and de-initialization functions
- * + IO operation functions
- *
- @verbatim
- ==============================================================================
- ##### GPIO Peripheral features #####
- ==============================================================================
- [..]
- Subject to the specific hardware characteristics of each I/O port listed in the datasheet, each
- port bit of the General Purpose IO (GPIO) Ports, can be individually configured by software
- in several modes:
- (+) Input mode
- (+) Analog mode
- (+) Output mode
- (+) Alternate function mode
- (+) External interrupt/event lines
-
- [..]
- During and just after reset, the alternate functions and external interrupt
- lines are not active and the I/O ports are configured in input floating mode.
-
- [..]
- All GPIO pins have weak internal pull-up and pull-down resistors, which can be
- activated or not.
-
- [..]
- In Output or Alternate mode, each IO can be configured on open-drain or push-pull
- type and the IO speed can be selected depending on the VDD value.
-
- [..]
- All ports have external interrupt/event capability. To use external interrupt
- lines, the port must be configured in input mode. All available GPIO pins are
- connected to the 16 external interrupt/event lines from EXTI0 to EXTI15.
-
- [..]
- The external interrupt/event controller consists of up to 20 edge detectors in connectivity
- line devices, or 19 edge detectors in other devices for generating event/interrupt requests.
- Each input line can be independently configured to select the type (event or interrupt) and
- the corresponding trigger event (rising or falling or both). Each line can also masked
- independently. A pending register maintains the status line of the interrupt requests
-
- ##### How to use this driver #####
- ==============================================================================
- [..]
- (#) Enable the GPIO APB2 clock using the following function : __HAL_RCC_GPIOx_CLK_ENABLE().
-
- (#) Configure the GPIO pin(s) using HAL_GPIO_Init().
- (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure
- (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef
- structure.
- (++) In case of Output or alternate function mode selection: the speed is
- configured through "Speed" member from GPIO_InitTypeDef structure
- (++) Analog mode is required when a pin is to be used as ADC channel
- or DAC output.
- (++) In case of external interrupt/event selection the "Mode" member from
- GPIO_InitTypeDef structure select the type (interrupt or event) and
- the corresponding trigger event (rising or falling or both).
-
- (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority
- mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using
- HAL_NVIC_EnableIRQ().
-
- (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin().
-
- (#) To set/reset the level of a pin configured in output mode use
- HAL_GPIO_WritePin()/HAL_GPIO_TogglePin().
-
- (#) To lock pin configuration until next reset use HAL_GPIO_LockPin().
-
- (#) During and just after reset, the alternate functions are not
- active and the GPIO pins are configured in input floating mode (except JTAG
- pins).
-
- (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose
- (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has
- priority over the GPIO function.
-
- (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as
- general purpose PD0 and PD1, respectively, when the HSE oscillator is off.
- The HSE has priority over the GPIO function.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @defgroup GPIO GPIO
- * @brief GPIO HAL module driver
- * @{
- */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @defgroup GPIO_Private_Constants GPIO Private Constants
- * @{
- */
-
-#define GPIO_MODE ((uint32_t)0x00000003)
-#define EXTI_MODE ((uint32_t)0x10000000)
-#define GPIO_MODE_IT ((uint32_t)0x00010000)
-#define GPIO_MODE_EVT ((uint32_t)0x00020000)
-#define RISING_EDGE ((uint32_t)0x00100000)
-#define FALLING_EDGE ((uint32_t)0x00200000)
-#define GPIO_OUTPUT_TYPE ((uint32_t)0x00000010)
-#define GPIO_NUMBER ((uint32_t)16)
-
-/* Definitions for bit manipulation of CRL and CRH register */
-#define GPIO_CR_MODE_INPUT ((uint32_t)0x00000000) /*!< 00: Input mode (reset state) */
-#define GPIO_CR_CNF_ANALOG ((uint32_t)0x00000000) /*!< 00: Analog mode */
-#define GPIO_CR_CNF_INPUT_FLOATING ((uint32_t)0x00000004) /*!< 01: Floating input (reset state) */
-#define GPIO_CR_CNF_INPUT_PU_PD ((uint32_t)0x00000008) /*!< 10: Input with pull-up / pull-down */
-#define GPIO_CR_CNF_GP_OUTPUT_PP ((uint32_t)0x00000000) /*!< 00: General purpose output push-pull */
-#define GPIO_CR_CNF_GP_OUTPUT_OD ((uint32_t)0x00000004) /*!< 01: General purpose output Open-drain */
-#define GPIO_CR_CNF_AF_OUTPUT_PP ((uint32_t)0x00000008) /*!< 10: Alternate function output Push-pull */
-#define GPIO_CR_CNF_AF_OUTPUT_OD ((uint32_t)0x0000000C) /*!< 11: Alternate function output Open-drain */
-
-/**
- * @}
- */
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/** @defgroup GPIO_Exported_Functions GPIO Exported Functions
- * @{
- */
-
-/** @defgroup GPIO_Exported_Functions_Group1 Initialization and deinitialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization and deinitialization functions #####
- ===============================================================================
- [..]
- This section provides functions allowing to initialize and de-initialize the GPIOs
- to be ready for use.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init.
- * @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral
- * @param GPIO_Init: pointer to a GPIO_InitTypeDef structure that contains
- * the configuration information for the specified GPIO peripheral.
- * @retval None
- */
-void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init)
-{
- uint32_t position;
- uint32_t ioposition = 0x00;
- uint32_t iocurrent = 0x00;
- uint32_t temp = 0x00;
- uint32_t config = 0x00;
- __IO uint32_t *configregister; /* Store the address of CRL or CRH register based on pin number */
- uint32_t registeroffset = 0; /* offset used during computation of CNF and MODE bits placement inside CRL or CRH register */
-
- /* Check the parameters */
- assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
- assert_param(IS_GPIO_PIN(GPIO_Init->Pin));
- assert_param(IS_GPIO_MODE(GPIO_Init->Mode));
-
- /* Configure the port pins */
- for (position = 0; position < GPIO_NUMBER; position++)
- {
- /* Get the IO position */
- ioposition = ((uint32_t)0x01) << position;
-
- /* Get the current IO position */
- iocurrent = (uint32_t)(GPIO_Init->Pin) & ioposition;
-
- if (iocurrent == ioposition)
- {
- /* Check the Alternate function parameters */
- assert_param(IS_GPIO_AF_INSTANCE(GPIOx));
-
- /* Based on the required mode, filling config variable with MODEy[1:0] and CNFy[3:2] corresponding bits */
- switch (GPIO_Init->Mode)
- {
- /* If we are configuring the pin in OUTPUT push-pull mode */
- case GPIO_MODE_OUTPUT_PP:
- /* Check the GPIO speed parameter */
- assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
- config = GPIO_Init->Speed + GPIO_CR_CNF_GP_OUTPUT_PP;
- break;
-
- /* If we are configuring the pin in OUTPUT open-drain mode */
- case GPIO_MODE_OUTPUT_OD:
- /* Check the GPIO speed parameter */
- assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
- config = GPIO_Init->Speed + GPIO_CR_CNF_GP_OUTPUT_OD;
- break;
-
- /* If we are configuring the pin in ALTERNATE FUNCTION push-pull mode */
- case GPIO_MODE_AF_PP:
- /* Check the GPIO speed parameter */
- assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
- config = GPIO_Init->Speed + GPIO_CR_CNF_AF_OUTPUT_PP;
- break;
-
- /* If we are configuring the pin in ALTERNATE FUNCTION open-drain mode */
- case GPIO_MODE_AF_OD:
- /* Check the GPIO speed parameter */
- assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
- config = GPIO_Init->Speed + GPIO_CR_CNF_AF_OUTPUT_OD;
- break;
-
- /* If we are configuring the pin in INPUT (also applicable to EVENT and IT mode) */
- case GPIO_MODE_INPUT:
- case GPIO_MODE_IT_RISING:
- case GPIO_MODE_IT_FALLING:
- case GPIO_MODE_IT_RISING_FALLING:
- case GPIO_MODE_EVT_RISING:
- case GPIO_MODE_EVT_FALLING:
- case GPIO_MODE_EVT_RISING_FALLING:
- /* Check the GPIO pull parameter */
- assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
- if(GPIO_Init->Pull == GPIO_NOPULL)
- {
- config = GPIO_CR_MODE_INPUT + GPIO_CR_CNF_INPUT_FLOATING;
- }
- else if(GPIO_Init->Pull == GPIO_PULLUP)
- {
- config = GPIO_CR_MODE_INPUT + GPIO_CR_CNF_INPUT_PU_PD;
-
- /* Set the corresponding ODR bit */
- GPIOx->BSRR = ioposition;
- }
- else /* GPIO_PULLDOWN */
- {
- config = GPIO_CR_MODE_INPUT + GPIO_CR_CNF_INPUT_PU_PD;
-
- /* Reset the corresponding ODR bit */
- GPIOx->BRR = ioposition;
- }
- break;
-
- /* If we are configuring the pin in INPUT analog mode */
- case GPIO_MODE_ANALOG:
- config = GPIO_CR_MODE_INPUT + GPIO_CR_CNF_ANALOG;
- break;
-
- /* Parameters are checked with assert_param */
- default:
- break;
- }
-
- /* Check if the current bit belongs to first half or last half of the pin count number
- in order to address CRH or CRL register*/
- configregister = (iocurrent < GPIO_PIN_8) ? &GPIOx->CRL : &GPIOx->CRH;
- registeroffset = (iocurrent < GPIO_PIN_8) ? (position << 2) : ((position - 8) << 2);
-
- /* Apply the new configuration of the pin to the register */
- MODIFY_REG((*configregister), ((GPIO_CRL_MODE0 | GPIO_CRL_CNF0) << registeroffset ), (config << registeroffset));
-
- /*--------------------- EXTI Mode Configuration ------------------------*/
- /* Configure the External Interrupt or event for the current IO */
- if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE)
- {
- /* Enable AFIO Clock */
- __HAL_RCC_AFIO_CLK_ENABLE();
- temp = AFIO->EXTICR[position >> 2];
- CLEAR_BIT(temp, ((uint32_t)0x0F) << (4 * (position & 0x03)));
- SET_BIT(temp, (GPIO_GET_INDEX(GPIOx)) << (4 * (position & 0x03)));
- AFIO->EXTICR[position >> 2] = temp;
-
-
- /* Configure the interrupt mask */
- if((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT)
- {
- SET_BIT(EXTI->IMR, iocurrent);
- }
- else
- {
- CLEAR_BIT(EXTI->IMR, iocurrent);
- }
-
- /* Configure the event mask */
- if((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT)
- {
- SET_BIT(EXTI->EMR, iocurrent);
- }
- else
- {
- CLEAR_BIT(EXTI->EMR, iocurrent);
- }
-
- /* Enable or disable the rising trigger */
- if((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE)
- {
- SET_BIT(EXTI->RTSR, iocurrent);
- }
- else
- {
- CLEAR_BIT(EXTI->RTSR, iocurrent);
- }
-
- /* Enable or disable the falling trigger */
- if((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE)
- {
- SET_BIT(EXTI->FTSR, iocurrent);
- }
- else
- {
- CLEAR_BIT(EXTI->FTSR, iocurrent);
- }
- }
- }
- }
-}
-
-/**
- * @brief De-initializes the GPIOx peripheral registers to their default reset values.
- * @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral
- * @param GPIO_Pin: specifies the port bit to be written.
- * This parameter can be one of GPIO_PIN_x where x can be (0..15).
- * @retval None
- */
-void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin)
-{
- uint32_t position = 0x00;
- uint32_t iocurrent = 0x00;
- uint32_t tmp = 0x00;
- __IO uint32_t *configregister; /* Store the address of CRL or CRH register based on pin number */
- uint32_t registeroffset = 0;
-
- /* Check the parameters */
- assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
- assert_param(IS_GPIO_PIN(GPIO_Pin));
-
- /* Configure the port pins */
- while ((GPIO_Pin >> position) != 0)
- {
- /* Get current io position */
- iocurrent = (GPIO_Pin) & ((uint32_t)1 << position);
-
- if (iocurrent)
- {
- /*------------------------- GPIO Mode Configuration --------------------*/
- /* Check if the current bit belongs to first half or last half of the pin count number
- in order to address CRH or CRL register */
- configregister = (iocurrent < GPIO_PIN_8) ? &GPIOx->CRL : &GPIOx->CRH;
- registeroffset = (iocurrent < GPIO_PIN_8) ? (position << 2) : ((position - 8) << 2);
-
- /* CRL/CRH default value is floating input(0x04) shifted to correct position */
- MODIFY_REG(*configregister, ((GPIO_CRL_MODE0 | GPIO_CRL_CNF0) << registeroffset ), GPIO_CRL_CNF0_0 << registeroffset);
-
- /* ODR default value is 0 */
- CLEAR_BIT(GPIOx->ODR, iocurrent);
-
- /*------------------------- EXTI Mode Configuration --------------------*/
- /* Clear the External Interrupt or Event for the current IO */
-
- tmp = AFIO->EXTICR[position >> 2];
- tmp &= (((uint32_t)0x0F) << (4 * (position & 0x03)));
- if(tmp == (GPIO_GET_INDEX(GPIOx) << (4 * (position & 0x03))))
- {
- tmp = ((uint32_t)0x0F) << (4 * (position & 0x03));
- CLEAR_BIT(AFIO->EXTICR[position >> 2], tmp);
-
- /* Clear EXTI line configuration */
- CLEAR_BIT(EXTI->IMR, (uint32_t)iocurrent);
- CLEAR_BIT(EXTI->EMR, (uint32_t)iocurrent);
-
- /* Clear Rising Falling edge configuration */
- CLEAR_BIT(EXTI->RTSR, (uint32_t)iocurrent);
- CLEAR_BIT(EXTI->FTSR, (uint32_t)iocurrent);
- }
- }
-
- position++;
- }
-}
-
-/**
- * @}
- */
-
-/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions
- * @brief GPIO Read and Write
- *
-@verbatim
- ===============================================================================
- ##### IO operation functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to manage the GPIOs.
-
-@endverbatim
- * @{
- */
-/**
- * @brief Reads the specified input port pin.
- * @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral
- * @param GPIO_Pin: specifies the port bit to read.
- * This parameter can be GPIO_PIN_x where x can be (0..15).
- * @retval The input port pin value.
- */
-GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
-{
- GPIO_PinState bitstatus;
-
- /* Check the parameters */
- assert_param(IS_GPIO_PIN(GPIO_Pin));
-
- if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET)
- {
- bitstatus = GPIO_PIN_SET;
- }
- else
- {
- bitstatus = GPIO_PIN_RESET;
- }
- return bitstatus;
-}
-
-/**
- * @brief Sets or clears the selected data port bit.
- *
- * @note This function uses GPIOx_BSRR register to allow atomic read/modify
- * accesses. In this way, there is no risk of an IRQ occurring between
- * the read and the modify access.
- *
- * @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral
- * @param GPIO_Pin: specifies the port bit to be written.
- * This parameter can be one of GPIO_PIN_x where x can be (0..15).
- * @param PinState: specifies the value to be written to the selected bit.
- * This parameter can be one of the GPIO_PinState enum values:
- * @arg GPIO_BIT_RESET: to clear the port pin
- * @arg GPIO_BIT_SET: to set the port pin
- * @retval None
- */
-void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState)
-{
- /* Check the parameters */
- assert_param(IS_GPIO_PIN(GPIO_Pin));
- assert_param(IS_GPIO_PIN_ACTION(PinState));
-
- if(PinState != GPIO_PIN_RESET)
- {
- GPIOx->BSRR = GPIO_Pin;
- }
- else
- {
- GPIOx->BSRR = (uint32_t)GPIO_Pin << 16;
- }
-}
-
-/**
- * @brief Toggles the specified GPIO pin
- * @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral
- * @param GPIO_Pin: Specifies the pins to be toggled.
- * @retval None
- */
-void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
-{
- /* Check the parameters */
- assert_param(IS_GPIO_PIN(GPIO_Pin));
-
- GPIOx->ODR ^= GPIO_Pin;
-}
-
-/**
-* @brief Locks GPIO Pins configuration registers.
-* @note The locking mechanism allows the IO configuration to be frozen. When the LOCK sequence
-* has been applied on a port bit, it is no longer possible to modify the value of the port bit until
-* the next reset.
-* @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral
-* @param GPIO_Pin: specifies the port bit to be locked.
-* This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
-* @retval None
-*/
-HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
-{
- __IO uint32_t tmp = GPIO_LCKR_LCKK;
-
- /* Check the parameters */
- assert_param(IS_GPIO_LOCK_INSTANCE(GPIOx));
- assert_param(IS_GPIO_PIN(GPIO_Pin));
-
- /* Apply lock key write sequence */
- SET_BIT(tmp, GPIO_Pin);
- /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
- GPIOx->LCKR = tmp;
- /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */
- GPIOx->LCKR = GPIO_Pin;
- /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
- GPIOx->LCKR = tmp;
- /* Read LCKK bit*/
- tmp = GPIOx->LCKR;
-
- if((uint32_t)(GPIOx->LCKR & GPIO_LCKR_LCKK))
- {
- return HAL_OK;
- }
- else
- {
- return HAL_ERROR;
- }
-}
-
-/**
- * @brief This function handles EXTI interrupt request.
- * @param GPIO_Pin: Specifies the pins connected EXTI line
- * @retval None
- */
-void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin)
-{
- /* EXTI line interrupt detected */
- if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != RESET)
- {
- __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin);
- HAL_GPIO_EXTI_Callback(GPIO_Pin);
- }
-}
-
-/**
- * @brief EXTI line detection callback
- * @param GPIO_Pin: Specifies the pins connected EXTI line
- * @retval None
- */
-__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(GPIO_Pin);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_GPIO_EXTI_Callback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-#endif /* HAL_GPIO_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c
deleted file mode 100644
index da0b4a5..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_gpio_ex.c
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief GPIO Extension HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the General Purpose Input/Output (GPIO) extension peripheral.
- * + Extended features functions
- *
- @verbatim
- ==============================================================================
- ##### GPIO Peripheral extension features #####
- ==============================================================================
- [..] GPIO module on STM32F1 family, manage also the AFIO register:
- (+) Possibility to use the EVENTOUT Cortex feature
-
- ##### How to use this driver #####
- ==============================================================================
- [..] This driver provides functions to use EVENTOUT Cortex feature
- (#) Configure EVENTOUT Cortex feature using the function HAL_GPIOEx_ConfigEventout()
- (#) Activate EVENTOUT Cortex feature using the HAL_GPIOEx_EnableEventout()
- (#) Deactivate EVENTOUT Cortex feature using the HAL_GPIOEx_DisableEventout()
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @defgroup GPIOEx GPIOEx
- * @brief GPIO HAL module driver
- * @{
- */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-
-/** @defgroup GPIOEx_Exported_Functions GPIOEx Exported Functions
- * @{
- */
-
-/** @defgroup GPIOEx_Exported_Functions_Group1 Extended features functions
- * @brief Extended features functions
- *
-@verbatim
- ==============================================================================
- ##### Extended features functions #####
- ==============================================================================
- [..] This section provides functions allowing to:
- (+) Configure EVENTOUT Cortex feature using the function HAL_GPIOEx_ConfigEventout()
- (+) Activate EVENTOUT Cortex feature using the HAL_GPIOEx_EnableEventout()
- (+) Deactivate EVENTOUT Cortex feature using the HAL_GPIOEx_DisableEventout()
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Configures the port and pin on which the EVENTOUT Cortex signal will be connected.
- * @param GPIO_PortSource Select the port used to output the Cortex EVENTOUT signal.
- * This parameter can be a value of @ref GPIOEx_EVENTOUT_PORT.
- * @param GPIO_PinSource Select the pin used to output the Cortex EVENTOUT signal.
- * This parameter can be a value of @ref GPIOEx_EVENTOUT_PIN.
- * @retval None
- */
-void HAL_GPIOEx_ConfigEventout(uint32_t GPIO_PortSource, uint32_t GPIO_PinSource)
-{
- /* Verify the parameters */
- assert_param(IS_AFIO_EVENTOUT_PORT(GPIO_PortSource));
- assert_param(IS_AFIO_EVENTOUT_PIN(GPIO_PinSource));
-
- /* Apply the new configuration */
- MODIFY_REG(AFIO->EVCR, (AFIO_EVCR_PORT)|(AFIO_EVCR_PIN), (GPIO_PortSource)|(GPIO_PinSource));
-}
-
-/**
- * @brief Enables the Event Output.
- * @retval None
- */
-void HAL_GPIOEx_EnableEventout(void)
-{
- SET_BIT(AFIO->EVCR, AFIO_EVCR_EVOE);
-}
-
-/**
- * @brief Disables the Event Output.
- * @retval None
- */
-void HAL_GPIOEx_DisableEventout(void)
-{
- CLEAR_BIT(AFIO->EVCR, AFIO_EVCR_EVOE);
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* HAL_GPIO_MODULE_ENABLED */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c
deleted file mode 100644
index 42d38ae..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c
+++ /dev/null
@@ -1,1440 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_pcd.c
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief PCD HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the USB Peripheral Controller:
- * + Initialization and de-initialization functions
- * + IO operation functions
- * + Peripheral Control functions
- * + Peripheral State functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- The PCD HAL driver can be used as follows:
-
- (#) Declare a PCD_HandleTypeDef handle structure, for example:
- PCD_HandleTypeDef hpcd;
-
- (#) Fill parameters of Init structure in HCD handle
-
- (#) Call HAL_PCD_Init() API to initialize the HCD peripheral (Core, Device core, ...)
-
- (#) Initialize the PCD low level resources through the HAL_PCD_MspInit() API:
- (##) Enable the PCD/USB Low Level interface clock using the following macro
- (+++) __HAL_RCC_USB_CLK_ENABLE(); For USB Device FS peripheral available
- on STM32F102xx and STM32F103xx devices
- (+++) __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); For USB OTG FS peripheral available
- on STM32F105xx and STM32F107xx devices
-
- (##) Initialize the related GPIO clocks
- (##) Configure PCD pin-out
- (##) Configure PCD NVIC interrupt
-
- (#)Associate the Upper USB device stack to the HAL PCD Driver:
- (##) hpcd.pData = pdev;
-
- (#)Enable HCD transmission and reception:
- (##) HAL_PCD_Start();
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-
-
-#ifdef HAL_PCD_MODULE_ENABLED
-
-#if defined(STM32F102x6) || defined(STM32F102xB) || \
- defined(STM32F103x6) || defined(STM32F103xB) || \
- defined(STM32F103xE) || defined(STM32F103xG) || \
- defined(STM32F105xC) || defined(STM32F107xC)
-
-/** @defgroup PCD PCD
- * @brief PCD HAL module driver
- * @{
- */
-
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/* Private macros ------------------------------------------------------------*/
-/** @defgroup PCD_Private_Macros PCD Private Macros
- * @{
- */
-#define PCD_MIN(a, b) (((a) < (b)) ? (a) : (b))
-#define PCD_MAX(a, b) (((a) > (b)) ? (a) : (b))
-/**
- * @}
- */
-
-/* Private functions ---------------------------------------------------------*/
-/** @defgroup PCD_Private_Functions PCD Private Functions
- * @{
- */
-#if defined (USB_OTG_FS)
-static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum);
-#endif /* USB_OTG_FS */
-
-#if defined (USB)
-static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd);
-#endif /* USB */
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup PCD_Exported_Functions PCD Exported Functions
- * @{
- */
-
-/** @defgroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization and de-initialization functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the PCD according to the specified
- * parameters in the PCD_InitTypeDef and create the associated handle.
- * @param hpcd: PCD handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd)
-{
- uint32_t index = 0;
-
- /* Check the PCD handle allocation */
- if(hpcd == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_PCD_ALL_INSTANCE(hpcd->Instance));
-
- if(hpcd->State == HAL_PCD_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hpcd->Lock = HAL_UNLOCKED;
-
- /* Init the low level hardware : GPIO, CLOCK, NVIC... */
- HAL_PCD_MspInit(hpcd);
- }
-
- hpcd->State = HAL_PCD_STATE_BUSY;
-
- /* Disable the Interrupts */
- __HAL_PCD_DISABLE(hpcd);
-
- /*Init the Core (common init.) */
- USB_CoreInit(hpcd->Instance, hpcd->Init);
-
- /* Force Device Mode*/
- USB_SetCurrentMode(hpcd->Instance , USB_DEVICE_MODE);
-
- /* Init endpoints structures */
- for (index = 0; index < 15 ; index++)
- {
- /* Init ep structure */
- hpcd->IN_ep[index].is_in = 1;
- hpcd->IN_ep[index].num = index;
- hpcd->IN_ep[index].tx_fifo_num = index;
- /* Control until ep is actvated */
- hpcd->IN_ep[index].type = EP_TYPE_CTRL;
- hpcd->IN_ep[index].maxpacket = 0;
- hpcd->IN_ep[index].xfer_buff = 0;
- hpcd->IN_ep[index].xfer_len = 0;
- }
-
- for (index = 0; index < 15 ; index++)
- {
- hpcd->OUT_ep[index].is_in = 0;
- hpcd->OUT_ep[index].num = index;
- hpcd->IN_ep[index].tx_fifo_num = index;
- /* Control until ep is activated */
- hpcd->OUT_ep[index].type = EP_TYPE_CTRL;
- hpcd->OUT_ep[index].maxpacket = 0;
- hpcd->OUT_ep[index].xfer_buff = 0;
- hpcd->OUT_ep[index].xfer_len = 0;
- }
-
- /* Init Device */
- USB_DevInit(hpcd->Instance, hpcd->Init);
-
- hpcd->USB_Address = 0;
- hpcd->State= HAL_PCD_STATE_READY;
-
- USB_DevDisconnect (hpcd->Instance);
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the PCD peripheral
- * @param hpcd: PCD handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd)
-{
- /* Check the PCD handle allocation */
- if(hpcd == NULL)
- {
- return HAL_ERROR;
- }
-
- hpcd->State = HAL_PCD_STATE_BUSY;
-
- /* Stop Device */
- HAL_PCD_Stop(hpcd);
-
- /* DeInit the low level hardware */
- HAL_PCD_MspDeInit(hpcd);
-
- hpcd->State = HAL_PCD_STATE_RESET;
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the PCD MSP.
- * @param hpcd: PCD handle
- * @retval None
- */
-__weak void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hpcd);
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_PCD_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes PCD MSP.
- * @param hpcd: PCD handle
- * @retval None
- */
-__weak void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hpcd);
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_PCD_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup PCD_Exported_Functions_Group2 IO operation functions
- * @brief Data transfers functions
- *
-@verbatim
- ===============================================================================
- ##### IO operation functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to manage the PCD data
- transfers.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Start The USB Device.
- * @param hpcd: PCD handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd)
-{
- __HAL_LOCK(hpcd);
- HAL_PCDEx_SetConnectionState (hpcd, 1);
- USB_DevConnect (hpcd->Instance);
- __HAL_PCD_ENABLE(hpcd);
- __HAL_UNLOCK(hpcd);
- return HAL_OK;
-}
-
-/**
- * @brief Stop The USB Device.
- * @param hpcd: PCD handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd)
-{
- __HAL_LOCK(hpcd);
- __HAL_PCD_DISABLE(hpcd);
- USB_StopDevice(hpcd->Instance);
- USB_DevDisconnect (hpcd->Instance);
- __HAL_UNLOCK(hpcd);
- return HAL_OK;
-}
-
-#if defined (USB_OTG_FS)
-/**
- * @brief This function handles PCD interrupt request.
- * @param hpcd: PCD handle
- * @retval HAL status
- */
-void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd)
-{
- USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
- uint32_t index = 0, ep_intr = 0, epint = 0, epnum = 0;
- uint32_t fifoemptymsk = 0, temp = 0;
- USB_OTG_EPTypeDef *ep = NULL;
-
- /* ensure that we are in device mode */
- if (USB_GetMode(hpcd->Instance) == USB_OTG_MODE_DEVICE)
- {
- /* avoid spurious interrupt */
- if(__HAL_PCD_IS_INVALID_INTERRUPT(hpcd))
- {
- return;
- }
-
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_MMIS))
- {
- /* incorrect mode, acknowledge the interrupt */
- __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_MMIS);
- }
-
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OEPINT))
- {
- epnum = 0;
-
- /* Read in the device interrupt bits */
- ep_intr = USB_ReadDevAllOutEpInterrupt(hpcd->Instance);
-
- while ( ep_intr )
- {
- if (ep_intr & 0x1)
- {
- epint = USB_ReadDevOutEPInterrupt(hpcd->Instance, epnum);
-
- if(( epint & USB_OTG_DOEPINT_XFRC) == USB_OTG_DOEPINT_XFRC)
- {
- CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_XFRC);
-
- HAL_PCD_DataOutStageCallback(hpcd, epnum);
- }
-
- if(( epint & USB_OTG_DOEPINT_STUP) == USB_OTG_DOEPINT_STUP)
- {
- /* Inform the upper layer that a setup packet is available */
- HAL_PCD_SetupStageCallback(hpcd);
- CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STUP);
- }
-
- if(( epint & USB_OTG_DOEPINT_OTEPDIS) == USB_OTG_DOEPINT_OTEPDIS)
- {
- CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPDIS);
- }
- }
- epnum++;
- ep_intr >>= 1;
- }
- }
-
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IEPINT))
- {
- /* Read in the device interrupt bits */
- ep_intr = USB_ReadDevAllInEpInterrupt(hpcd->Instance);
-
- epnum = 0;
-
- while ( ep_intr )
- {
- if (ep_intr & 0x1) /* In ITR */
- {
- epint = USB_ReadDevInEPInterrupt(hpcd->Instance, epnum);
-
- if(( epint & USB_OTG_DIEPINT_XFRC) == USB_OTG_DIEPINT_XFRC)
- {
- fifoemptymsk = 0x1 << epnum;
- USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk;
-
- CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_XFRC);
-
- HAL_PCD_DataInStageCallback(hpcd, epnum);
- }
- if(( epint & USB_OTG_DIEPINT_TOC) == USB_OTG_DIEPINT_TOC)
- {
- CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_TOC);
- }
- if(( epint & USB_OTG_DIEPINT_ITTXFE) == USB_OTG_DIEPINT_ITTXFE)
- {
- CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_ITTXFE);
- }
- if(( epint & USB_OTG_DIEPINT_INEPNE) == USB_OTG_DIEPINT_INEPNE)
- {
- CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_INEPNE);
- }
- if(( epint & USB_OTG_DIEPINT_EPDISD) == USB_OTG_DIEPINT_EPDISD)
- {
- CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_EPDISD);
- }
- if(( epint & USB_OTG_DIEPINT_TXFE) == USB_OTG_DIEPINT_TXFE)
- {
- PCD_WriteEmptyTxFifo(hpcd , epnum);
- }
- }
- epnum++;
- ep_intr >>= 1;
- }
- }
-
- /* Handle Resume Interrupt */
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT))
- {
- /* Clear the Remote Wake-up signalling */
- USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG;
-
- HAL_PCD_ResumeCallback(hpcd);
-
- __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT);
- }
-
- /* Handle Suspend Interrupt */
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP))
- {
- if((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS)
- {
-
- HAL_PCD_SuspendCallback(hpcd);
- }
- __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP);
- }
-
- /* Handle Reset Interrupt */
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBRST))
- {
- USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG;
- USB_FlushTxFifo(hpcd->Instance , 0 );
-
- for (index = 0; index < hpcd->Init.dev_endpoints ; index++)
- {
- USBx_INEP(index)->DIEPINT = 0xFF;
- USBx_OUTEP(index)->DOEPINT = 0xFF;
- }
- USBx_DEVICE->DAINT = 0xFFFFFFFF;
- USBx_DEVICE->DAINTMSK |= 0x10001;
-
- USBx_DEVICE->DOEPMSK |= (USB_OTG_DOEPMSK_STUPM | USB_OTG_DOEPMSK_XFRCM | USB_OTG_DOEPMSK_EPDM);
- USBx_DEVICE->DIEPMSK |= (USB_OTG_DIEPMSK_TOM | USB_OTG_DIEPMSK_XFRCM | USB_OTG_DIEPMSK_EPDM);
-
- /* Set Default Address to 0 */
- USBx_DEVICE->DCFG &= ~USB_OTG_DCFG_DAD;
-
- /* setup EP0 to receive SETUP packets */
- USB_EP0_OutStart(hpcd->Instance, (uint8_t *)hpcd->Setup);
-
- __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBRST);
- }
-
- /* Handle Enumeration done Interrupt */
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE))
- {
- USB_ActivateSetup(hpcd->Instance);
- hpcd->Instance->GUSBCFG &= ~USB_OTG_GUSBCFG_TRDT;
-
- hpcd->Init.speed = USB_OTG_SPEED_FULL;
- hpcd->Init.ep0_mps = USB_OTG_FS_MAX_PACKET_SIZE ;
- hpcd->Instance->GUSBCFG |= (uint32_t)((USBD_FS_TRDT_VALUE << 10) & USB_OTG_GUSBCFG_TRDT);
-
- HAL_PCD_ResetCallback(hpcd);
-
- __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE);
- }
-
- /* Handle RxQLevel Interrupt */
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_RXFLVL))
- {
- USB_MASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL);
- temp = USBx->GRXSTSP;
- ep = &hpcd->OUT_ep[temp & USB_OTG_GRXSTSP_EPNUM];
-
- if(((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_DATA_UPDT)
- {
- if((temp & USB_OTG_GRXSTSP_BCNT) != 0)
- {
- USB_ReadPacket(USBx, ep->xfer_buff, (temp & USB_OTG_GRXSTSP_BCNT) >> 4);
- ep->xfer_buff += (temp & USB_OTG_GRXSTSP_BCNT) >> 4;
- ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4;
- }
- }
- else if (((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_SETUP_UPDT)
- {
- USB_ReadPacket(USBx, (uint8_t *)hpcd->Setup, 8);
- ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4;
- }
- USB_UNMASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL);
- }
-
- /* Handle SOF Interrupt */
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SOF))
- {
- HAL_PCD_SOFCallback(hpcd);
- __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SOF);
- }
-
- /* Handle Incomplete ISO IN Interrupt */
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR))
- {
- HAL_PCD_ISOINIncompleteCallback(hpcd, epnum);
- __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR);
- }
-
- /* Handle Incomplete ISO OUT Interrupt */
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT))
- {
- HAL_PCD_ISOOUTIncompleteCallback(hpcd, epnum);
- __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT);
- }
-
- /* Handle Connection event Interrupt */
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT))
- {
- HAL_PCD_ConnectCallback(hpcd);
- __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT);
- }
-
- /* Handle Disconnection event Interrupt */
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OTGINT))
- {
- temp = hpcd->Instance->GOTGINT;
-
- if((temp & USB_OTG_GOTGINT_SEDET) == USB_OTG_GOTGINT_SEDET)
- {
- HAL_PCD_DisconnectCallback(hpcd);
- }
- hpcd->Instance->GOTGINT |= temp;
- }
- }
-}
-#endif /* USB_OTG_FS */
-
-#if defined (USB)
-/**
- * @brief This function handles PCD interrupt request.
- * @param hpcd: PCD handle
- * @retval HAL status
- */
-void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd)
-{
- uint32_t wInterrupt_Mask = 0;
-
- if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_CTR))
- {
- /* servicing of the endpoint correct transfer interrupt */
- /* clear of the CTR flag into the sub */
- PCD_EP_ISR_Handler(hpcd);
- }
-
- if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_RESET))
- {
- __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_RESET);
- HAL_PCD_ResetCallback(hpcd);
- HAL_PCD_SetAddress(hpcd, 0);
- }
-
- if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_PMAOVR))
- {
- __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_PMAOVR);
- }
- if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_ERR))
- {
- __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ERR);
- }
-
- if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_WKUP))
- {
- hpcd->Instance->CNTR &= ~(USB_CNTR_LP_MODE);
-
- /*set wInterrupt_Mask global variable*/
- wInterrupt_Mask = USB_CNTR_CTRM | USB_CNTR_WKUPM | USB_CNTR_SUSPM | USB_CNTR_ERRM \
- | USB_CNTR_ESOFM | USB_CNTR_RESETM;
-
- /*Set interrupt mask*/
- hpcd->Instance->CNTR = wInterrupt_Mask;
-
- HAL_PCD_ResumeCallback(hpcd);
-
- __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_WKUP);
- }
-
- if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_SUSP))
- {
- /* clear of the ISTR bit must be done after setting of CNTR_FSUSP */
- __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SUSP);
-
- /* Force low-power mode in the macrocell */
- hpcd->Instance->CNTR |= USB_CNTR_FSUSP;
- hpcd->Instance->CNTR |= USB_CNTR_LP_MODE;
- if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_WKUP) == 0)
- {
- HAL_PCD_SuspendCallback(hpcd);
- }
- }
-
- if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_SOF))
- {
- __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SOF);
- HAL_PCD_SOFCallback(hpcd);
- }
-
- if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_ESOF))
- {
- /* clear ESOF flag in ISTR */
- __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ESOF);
- }
-}
-#endif /* USB */
-
-/**
- * @brief Data out stage callbacks
- * @param hpcd: PCD handle
- * @param epnum: endpoint number
- * @retval None
- */
- __weak void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hpcd);
- UNUSED(epnum);
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_PCD_DataOutStageCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Data IN stage callbacks
- * @param hpcd: PCD handle
- * @param epnum: endpoint number
- * @retval None
- */
- __weak void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hpcd);
- UNUSED(epnum);
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_PCD_DataInStageCallback could be implemented in the user file
- */
-}
-/**
- * @brief Setup stage callback
- * @param hpcd: PCD handle
- * @retval None
- */
- __weak void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hpcd);
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_PCD_SetupStageCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief USB Start Of Frame callbacks
- * @param hpcd: PCD handle
- * @retval None
- */
- __weak void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hpcd);
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_PCD_SOFCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief USB Reset callbacks
- * @param hpcd: PCD handle
- * @retval None
- */
- __weak void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hpcd);
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_PCD_ResetCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Suspend event callbacks
- * @param hpcd: PCD handle
- * @retval None
- */
- __weak void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hpcd);
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_PCD_SuspendCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Resume event callbacks
- * @param hpcd: PCD handle
- * @retval None
- */
- __weak void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hpcd);
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_PCD_ResumeCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Incomplete ISO OUT callbacks
- * @param hpcd: PCD handle
- * @param epnum: endpoint number
- * @retval None
- */
- __weak void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hpcd);
- UNUSED(epnum);
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_PCD_ISOOUTIncompleteCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Incomplete ISO IN callbacks
- * @param hpcd: PCD handle
- * @param epnum: endpoint number
- * @retval None
- */
- __weak void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hpcd);
- UNUSED(epnum);
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_PCD_ISOINIncompleteCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Connection event callbacks
- * @param hpcd: PCD handle
- * @retval None
- */
- __weak void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hpcd);
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_PCD_ConnectCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Disconnection event callbacks
- * @param hpcd: PCD handle
- * @retval None
- */
- __weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hpcd);
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_PCD_DisconnectCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup PCD_Exported_Functions_Group3 Peripheral Control functions
- * @brief management functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral Control functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to control the PCD data
- transfers.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Connect the USB device
- * @param hpcd: PCD handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd)
-{
- __HAL_LOCK(hpcd);
- HAL_PCDEx_SetConnectionState (hpcd, 1);
- USB_DevConnect(hpcd->Instance);
- __HAL_UNLOCK(hpcd);
- return HAL_OK;
-}
-
-/**
- * @brief Disconnect the USB device
- * @param hpcd: PCD handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd)
-{
- __HAL_LOCK(hpcd);
- HAL_PCDEx_SetConnectionState (hpcd, 0);
- USB_DevDisconnect(hpcd->Instance);
- __HAL_UNLOCK(hpcd);
- return HAL_OK;
-}
-
-/**
- * @brief Set the USB Device address
- * @param hpcd: PCD handle
- * @param address: new device address
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address)
-{
- __HAL_LOCK(hpcd);
- hpcd->USB_Address = address;
- USB_SetDevAddress(hpcd->Instance, address);
- __HAL_UNLOCK(hpcd);
- return HAL_OK;
-}
-/**
- * @brief Open and configure an endpoint
- * @param hpcd: PCD handle
- * @param ep_addr: endpoint address
- * @param ep_mps: endpoint max packet size
- * @param ep_type: endpoint type
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type)
-{
- HAL_StatusTypeDef ret = HAL_OK;
- PCD_EPTypeDef *ep = NULL;
-
- if ((ep_addr & 0x80) == 0x80)
- {
- ep = &hpcd->IN_ep[ep_addr & 0x7F];
- }
- else
- {
- ep = &hpcd->OUT_ep[ep_addr & 0x7F];
- }
- ep->num = ep_addr & 0x7F;
-
- ep->is_in = (0x80 & ep_addr) != 0;
- ep->maxpacket = ep_mps;
- ep->type = ep_type;
-
- __HAL_LOCK(hpcd);
- USB_ActivateEndpoint(hpcd->Instance , ep);
- __HAL_UNLOCK(hpcd);
- return ret;
-}
-
-/**
- * @brief Deactivate an endpoint
- * @param hpcd: PCD handle
- * @param ep_addr: endpoint address
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
-{
- PCD_EPTypeDef *ep = NULL;
-
- if ((ep_addr & 0x80) == 0x80)
- {
- ep = &hpcd->IN_ep[ep_addr & 0x7F];
- }
- else
- {
- ep = &hpcd->OUT_ep[ep_addr & 0x7F];
- }
- ep->num = ep_addr & 0x7F;
-
- ep->is_in = (0x80 & ep_addr) != 0;
-
- __HAL_LOCK(hpcd);
- USB_DeactivateEndpoint(hpcd->Instance , ep);
- __HAL_UNLOCK(hpcd);
- return HAL_OK;
-}
-
-
-/**
- * @brief Receive an amount of data
- * @param hpcd: PCD handle
- * @param ep_addr: endpoint address
- * @param pBuf: pointer to the reception buffer
- * @param len: amount of data to be received
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len)
-{
- PCD_EPTypeDef *ep = NULL;
-
- ep = &hpcd->OUT_ep[ep_addr & 0x7F];
-
- /*setup and start the Xfer */
- ep->xfer_buff = pBuf;
- ep->xfer_len = len;
- ep->xfer_count = 0;
- ep->is_in = 0;
- ep->num = ep_addr & 0x7F;
-
- __HAL_LOCK(hpcd);
-
- if ((ep_addr & 0x7F) == 0 )
- {
- USB_EP0StartXfer(hpcd->Instance , ep);
- }
- else
- {
- USB_EPStartXfer(hpcd->Instance , ep);
- }
- __HAL_UNLOCK(hpcd);
-
- return HAL_OK;
-}
-
-/**
- * @brief Get Received Data Size
- * @param hpcd: PCD handle
- * @param ep_addr: endpoint address
- * @retval Data Size
- */
-uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
-{
- return hpcd->OUT_ep[ep_addr & 0x7F].xfer_count;
-}
-/**
- * @brief Send an amount of data
- * @param hpcd: PCD handle
- * @param ep_addr: endpoint address
- * @param pBuf: pointer to the transmission buffer
- * @param len: amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len)
-{
- PCD_EPTypeDef *ep = NULL;
-
- ep = &hpcd->IN_ep[ep_addr & 0x7F];
-
- /*setup and start the Xfer */
- ep->xfer_buff = pBuf;
- ep->xfer_len = len;
- ep->xfer_count = 0;
- ep->is_in = 1;
- ep->num = ep_addr & 0x7F;
-
- __HAL_LOCK(hpcd);
-
- if ((ep_addr & 0x7F) == 0 )
- {
- USB_EP0StartXfer(hpcd->Instance , ep);
- }
- else
- {
- USB_EPStartXfer(hpcd->Instance , ep);
- }
-
- __HAL_UNLOCK(hpcd);
-
- return HAL_OK;
-}
-
-/**
- * @brief Set a STALL condition over an endpoint
- * @param hpcd: PCD handle
- * @param ep_addr: endpoint address
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
-{
- PCD_EPTypeDef *ep = NULL;
-
- if ((0x80 & ep_addr) == 0x80)
- {
- ep = &hpcd->IN_ep[ep_addr & 0x7F];
- }
- else
- {
- ep = &hpcd->OUT_ep[ep_addr];
- }
-
- ep->is_stall = 1;
- ep->num = ep_addr & 0x7F;
- ep->is_in = ((ep_addr & 0x80) == 0x80);
-
- __HAL_LOCK(hpcd);
- USB_EPSetStall(hpcd->Instance , ep);
- if((ep_addr & 0x7F) == 0)
- {
- USB_EP0_OutStart(hpcd->Instance, (uint8_t *)hpcd->Setup);
- }
- __HAL_UNLOCK(hpcd);
-
- return HAL_OK;
-}
-
-/**
- * @brief Clear a STALL condition over in an endpoint
- * @param hpcd: PCD handle
- * @param ep_addr: endpoint address
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
-{
- PCD_EPTypeDef *ep = NULL;
-
- if ((0x80 & ep_addr) == 0x80)
- {
- ep = &hpcd->IN_ep[ep_addr & 0x7F];
- }
- else
- {
- ep = &hpcd->OUT_ep[ep_addr];
- }
-
- ep->is_stall = 0;
- ep->num = ep_addr & 0x7F;
- ep->is_in = ((ep_addr & 0x80) == 0x80);
-
- __HAL_LOCK(hpcd);
- USB_EPClearStall(hpcd->Instance , ep);
- __HAL_UNLOCK(hpcd);
-
- return HAL_OK;
-}
-
-/**
- * @brief Flush an endpoint
- * @param hpcd: PCD handle
- * @param ep_addr: endpoint address
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
-{
- __HAL_LOCK(hpcd);
-
- if ((ep_addr & 0x80) == 0x80)
- {
- USB_FlushTxFifo(hpcd->Instance, ep_addr & 0x7F);
- }
- else
- {
- USB_FlushRxFifo(hpcd->Instance);
- }
-
- __HAL_UNLOCK(hpcd);
-
- return HAL_OK;
-}
-
-/**
- * @brief HAL_PCD_ActivateRemoteWakeup : active remote wakeup signalling
- * @param hpcd: PCD handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd)
-{
- return(USB_ActivateRemoteWakeup(hpcd->Instance));
-}
-
-/**
- * @brief HAL_PCD_DeActivateRemoteWakeup : de-active remote wakeup signalling
- * @param hpcd: PCD handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd)
-{
- return(USB_DeActivateRemoteWakeup(hpcd->Instance));
-}
-/**
- * @}
- */
-
-/** @defgroup PCD_Exported_Functions_Group4 Peripheral State functions
- * @brief Peripheral State functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral State functions #####
- ===============================================================================
- [..]
- This subsection permits to get in run-time the status of the peripheral
- and the data flow.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Return the PCD state
- * @param hpcd: PCD handle
- * @retval HAL state
- */
-PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd)
-{
- return hpcd->State;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/** @addtogroup PCD_Private_Functions
- * @{
- */
-#if defined (USB_OTG_FS)
-/**
- * @brief DCD_WriteEmptyTxFifo
- * check FIFO for the next packet to be loaded
- * @param hpcd: PCD handle
- * @param epnum : endpoint number
- * This parameter can be a value from 0 to 15
- * @retval HAL status
- */
-static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum)
-{
- USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
- USB_OTG_EPTypeDef *ep = NULL;
- int32_t len = 0;
- uint32_t len32b = 0;
- uint32_t fifoemptymsk = 0;
-
- ep = &hpcd->IN_ep[epnum];
- len = ep->xfer_len - ep->xfer_count;
-
- if (len > ep->maxpacket)
- {
- len = ep->maxpacket;
- }
-
- len32b = (len + 3) / 4;
-
- while ((USBx_INEP(epnum)->DTXFSTS & USB_OTG_DTXFSTS_INEPTFSAV) > len32b &&
- ep->xfer_count < ep->xfer_len &&
- ep->xfer_len != 0)
- {
- /* Write the FIFO */
- len = ep->xfer_len - ep->xfer_count;
-
- if (len > ep->maxpacket)
- {
- len = ep->maxpacket;
- }
- len32b = (len + 3) / 4;
-
- USB_WritePacket(USBx, ep->xfer_buff, epnum, len);
-
- ep->xfer_buff += len;
- ep->xfer_count += len;
- }
-
- if(len <= 0)
- {
- fifoemptymsk = 0x1 << epnum;
- USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk;
-
- }
-
- return HAL_OK;
-}
-#endif /* USB_OTG_FS */
-
-#if defined (USB)
-/**
- * @brief This function handles PCD Endpoint interrupt request.
- * @param hpcd: PCD handle
- * @retval HAL status
- */
-static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd)
-{
- PCD_EPTypeDef *ep = NULL;
- uint16_t count = 0;
- uint8_t epindex = 0;
- __IO uint16_t wIstr = 0;
- __IO uint16_t wEPVal = 0;
-
- /* stay in loop while pending interrupts */
- while (((wIstr = hpcd->Instance->ISTR) & USB_ISTR_CTR) != 0)
- {
- /* extract highest priority endpoint number */
- epindex = (uint8_t)(wIstr & USB_ISTR_EP_ID);
-
- if (epindex == 0)
- {
- /* Decode and service control endpoint interrupt */
-
- /* DIR bit = origin of the interrupt */
- if ((wIstr & USB_ISTR_DIR) == 0)
- {
- /* DIR = 0 */
-
- /* DIR = 0 => IN int */
- /* DIR = 0 implies that (EP_CTR_TX = 1) always */
- PCD_CLEAR_TX_EP_CTR(hpcd->Instance, PCD_ENDP0);
- ep = &hpcd->IN_ep[0];
-
- ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num);
- ep->xfer_buff += ep->xfer_count;
-
- /* TX COMPLETE */
- HAL_PCD_DataInStageCallback(hpcd, 0);
-
-
- if((hpcd->USB_Address > 0)&& ( ep->xfer_len == 0))
- {
- hpcd->Instance->DADDR = (hpcd->USB_Address | USB_DADDR_EF);
- hpcd->USB_Address = 0;
- }
-
- }
- else
- {
- /* DIR = 1 */
-
- /* DIR = 1 & CTR_RX => SETUP or OUT int */
- /* DIR = 1 & (CTR_TX | CTR_RX) => 2 int pending */
- ep = &hpcd->OUT_ep[0];
- wEPVal = PCD_GET_ENDPOINT(hpcd->Instance, PCD_ENDP0);
-
- if ((wEPVal & USB_EP_SETUP) != 0)
- {
- /* Get SETUP Packet*/
- ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num);
- USB_ReadPMA(hpcd->Instance, (uint8_t*)hpcd->Setup ,ep->pmaadress , ep->xfer_count);
- /* SETUP bit kept frozen while CTR_RX = 1*/
- PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0);
-
- /* Process SETUP Packet*/
- HAL_PCD_SetupStageCallback(hpcd);
- }
-
- else if ((wEPVal & USB_EP_CTR_RX) != 0)
- {
- PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0);
- /* Get Control Data OUT Packet*/
- ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num);
-
- if (ep->xfer_count != 0)
- {
- USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, ep->xfer_count);
- ep->xfer_buff+=ep->xfer_count;
- }
-
- /* Process Control Data OUT Packet*/
- HAL_PCD_DataOutStageCallback(hpcd, 0);
-
- PCD_SET_EP_RX_CNT(hpcd->Instance, PCD_ENDP0, ep->maxpacket);
- PCD_SET_EP_RX_STATUS(hpcd->Instance, PCD_ENDP0, USB_EP_RX_VALID);
- }
- }
- }
- else
- {
- /* Decode and service non control endpoints interrupt */
-
- /* process related endpoint register */
- wEPVal = PCD_GET_ENDPOINT(hpcd->Instance, epindex);
- if ((wEPVal & USB_EP_CTR_RX) != 0)
- {
- /* clear int flag */
- PCD_CLEAR_RX_EP_CTR(hpcd->Instance, epindex);
- ep = &hpcd->OUT_ep[epindex];
-
- /* OUT double Buffering*/
- if (ep->doublebuffer == 0)
- {
- count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num);
- if (count != 0)
- {
- USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, count);
- }
- }
- else
- {
- if (PCD_GET_ENDPOINT(hpcd->Instance, ep->num) & USB_EP_DTOG_RX)
- {
- /*read from endpoint BUF0Addr buffer*/
- count = PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num);
- if (count != 0)
- {
- USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, count);
- }
- }
- else
- {
- /*read from endpoint BUF1Addr buffer*/
- count = PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num);
- if (count != 0)
- {
- USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, count);
- }
- }
- PCD_FreeUserBuffer(hpcd->Instance, ep->num, PCD_EP_DBUF_OUT);
- }
- /*multi-packet on the NON control OUT endpoint*/
- ep->xfer_count+=count;
- ep->xfer_buff+=count;
-
- if ((ep->xfer_len == 0) || (count < ep->maxpacket))
- {
- /* RX COMPLETE */
- HAL_PCD_DataOutStageCallback(hpcd, ep->num);
- }
- else
- {
- HAL_PCD_EP_Receive(hpcd, ep->num, ep->xfer_buff, ep->xfer_len);
- }
-
- } /* if((wEPVal & EP_CTR_RX) */
-
- if ((wEPVal & USB_EP_CTR_TX) != 0)
- {
- ep = &hpcd->IN_ep[epindex];
-
- /* clear int flag */
- PCD_CLEAR_TX_EP_CTR(hpcd->Instance, epindex);
-
- /* IN double Buffering*/
- if (ep->doublebuffer == 0)
- {
- ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num);
- if (ep->xfer_count != 0)
- {
- USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, ep->xfer_count);
- }
- }
- else
- {
- if (PCD_GET_ENDPOINT(hpcd->Instance, ep->num) & USB_EP_DTOG_TX)
- {
- /*read from endpoint BUF0Addr buffer*/
- ep->xfer_count = PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num);
- if (ep->xfer_count != 0)
- {
- USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, ep->xfer_count);
- }
- }
- else
- {
- /*read from endpoint BUF1Addr buffer*/
- ep->xfer_count = PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num);
- if (ep->xfer_count != 0)
- {
- USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, ep->xfer_count);
- }
- }
- PCD_FreeUserBuffer(hpcd->Instance, ep->num, PCD_EP_DBUF_IN);
- }
- /*multi-packet on the NON control IN endpoint*/
- ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num);
- ep->xfer_buff+=ep->xfer_count;
-
- /* Zero Length Packet? */
- if (ep->xfer_len == 0)
- {
- /* TX COMPLETE */
- HAL_PCD_DataInStageCallback(hpcd, ep->num);
- }
- else
- {
- HAL_PCD_EP_Transmit(hpcd, ep->num, ep->xfer_buff, ep->xfer_len);
- }
- }
- }
- }
- return HAL_OK;
-}
-#endif /* USB */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* STM32F102x6 || STM32F102xB || */
- /* STM32F103x6 || STM32F103xB || */
- /* STM32F103xE || STM32F103xG || */
- /* STM32F105xC || STM32F107xC */
-
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c
deleted file mode 100644
index 5f3002d..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c
+++ /dev/null
@@ -1,252 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_pcd_ex.c
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief Extended PCD HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the USB Peripheral Controller:
- * + Extended features functions: Update FIFO configuration,
- * PMA configuration for EPs
- *
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-#ifdef HAL_PCD_MODULE_ENABLED
-
-#if defined(STM32F102x6) || defined(STM32F102xB) || \
- defined(STM32F103x6) || defined(STM32F103xB) || \
- defined(STM32F103xE) || defined(STM32F103xG) || \
- defined(STM32F105xC) || defined(STM32F107xC)
-
-
-/** @defgroup PCDEx PCDEx
- * @brief PCD Extended HAL module driver
- * @{
- */
-
-
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/* Private macros ------------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions
- * @{
- */
-
-/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
- * @brief PCDEx control functions
- *
-@verbatim
- ===============================================================================
- ##### Extended Peripheral Control functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Update FIFO (USB_OTG_FS)
- (+) Update PMA configuration (USB)
-
-@endverbatim
- * @{
- */
-
-#if defined (USB_OTG_FS)
-/**
- * @brief Set Tx FIFO
- * @param hpcd: PCD handle
- * @param fifo: The number of Tx fifo
- * @param size: Fifo size
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size)
-{
- uint8_t index = 0;
- uint32_t Tx_Offset = 0;
-
- /* TXn min size = 16 words. (n : Transmit FIFO index)
- When a TxFIFO is not used, the Configuration should be as follows:
- case 1 : n > m and Txn is not used (n,m : Transmit FIFO indexes)
- --> Txm can use the space allocated for Txn.
- case2 : n < m and Txn is not used (n,m : Transmit FIFO indexes)
- --> Txn should be configured with the minimum space of 16 words
- The FIFO is used optimally when used TxFIFOs are allocated in the top
- of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones.
- When DMA is used 3n * FIFO locations should be reserved for internal DMA registers */
-
- Tx_Offset = hpcd->Instance->GRXFSIZ;
-
- if(fifo == 0)
- {
- hpcd->Instance->DIEPTXF0_HNPTXFSIZ = (size << 16) | Tx_Offset;
- }
- else
- {
- Tx_Offset += (hpcd->Instance->DIEPTXF0_HNPTXFSIZ) >> 16;
- for (index = 0; index < (fifo - 1); index++)
- {
- Tx_Offset += (hpcd->Instance->DIEPTXF[index] >> 16);
- }
-
- /* Multiply Tx_Size by 2 to get higher performance */
- hpcd->Instance->DIEPTXF[fifo - 1] = (size << 16) | Tx_Offset;
-
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Set Rx FIFO
- * @param hpcd: PCD handle
- * @param size: Size of Rx fifo
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size)
-{
- hpcd->Instance->GRXFSIZ = size;
- return HAL_OK;
-}
-#endif /* USB_OTG_FS */
-
-#if defined (USB)
-/**
- * @brief Configure PMA for EP
- * @param hpcd : Device instance
- * @param ep_addr: endpoint address
- * @param ep_kind: endpoint Kind
- * USB_SNG_BUF: Single Buffer used
- * USB_DBL_BUF: Double Buffer used
- * @param pmaadress: EP address in The PMA: In case of single buffer endpoint
- * this parameter is 16-bit value providing the address
- * in PMA allocated to endpoint.
- * In case of double buffer endpoint this parameter
- * is a 32-bit value providing the endpoint buffer 0 address
- * in the LSB part of 32-bit value and endpoint buffer 1 address
- * in the MSB part of 32-bit value.
- * @retval HAL status
- */
-
-HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd,
- uint16_t ep_addr,
- uint16_t ep_kind,
- uint32_t pmaadress)
-
-{
- PCD_EPTypeDef *ep = NULL;
-
- /* initialize ep structure*/
- if ((0x80 & ep_addr) == 0x80)
- {
- ep = &hpcd->IN_ep[ep_addr & 0x7F];
- }
- else
- {
- ep = &hpcd->OUT_ep[ep_addr];
- }
-
- /* Here we check if the endpoint is single or double Buffer*/
- if (ep_kind == PCD_SNG_BUF)
- {
- /*Single Buffer*/
- ep->doublebuffer = 0;
- /*Configure te PMA*/
- ep->pmaadress = (uint16_t)pmaadress;
- }
- else /*USB_DBL_BUF*/
- {
- /*Double Buffer Endpoint*/
- ep->doublebuffer = 1;
- /*Configure the PMA*/
- ep->pmaaddr0 = pmaadress & 0xFFFF;
- ep->pmaaddr1 = (pmaadress & 0xFFFF0000) >> 16;
- }
-
- return HAL_OK;
-}
-#endif /* USB */
-/**
- * @}
- */
-
-/** @defgroup PCDEx_Exported_Functions_Group2 Peripheral State functions
- * @brief Manage device connection state
- * @{
- */
-/**
- * @brief Software Device Connection,
- * this function is not required by USB OTG FS peripheral, it is used
- * only by USB Device FS peripheral.
- * @param hpcd: PCD handle
- * @param state: connection state (0 : disconnected / 1: connected)
- * @retval None
- */
-__weak void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(hpcd);
- UNUSED(state);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_PCDEx_SetConnectionState could be implemented in the user file
- */
-}
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* STM32F102x6 || STM32F102xB || */
- /* STM32F103x6 || STM32F103xB || */
- /* STM32F103xE || STM32F103xG || */
- /* STM32F105xC || STM32F107xC */
-
-#endif /* HAL_PCD_MODULE_ENABLED */
-
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c
deleted file mode 100644
index bf00707..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c
+++ /dev/null
@@ -1,636 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_pwr.c
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief PWR HAL module driver.
- *
- * This file provides firmware functions to manage the following
- * functionalities of the Power Controller (PWR) peripheral:
- * + Initialization/de-initialization functions
- * + Peripheral Control functions
- *
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @defgroup PWR PWR
- * @brief PWR HAL module driver
- * @{
- */
-
-#ifdef HAL_PWR_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-
-/** @defgroup PWR_Private_Constants PWR Private Constants
- * @{
- */
-
-/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask
- * @{
- */
-#define PVD_MODE_IT ((uint32_t)0x00010000)
-#define PVD_MODE_EVT ((uint32_t)0x00020000)
-#define PVD_RISING_EDGE ((uint32_t)0x00000001)
-#define PVD_FALLING_EDGE ((uint32_t)0x00000002)
-/**
- * @}
- */
-
-
-/** @defgroup PWR_register_alias_address PWR Register alias address
- * @{
- */
-/* ------------- PWR registers bit address in the alias region ---------------*/
-#define PWR_OFFSET (PWR_BASE - PERIPH_BASE)
-#define PWR_CR_OFFSET 0x00
-#define PWR_CSR_OFFSET 0x04
-#define PWR_CR_OFFSET_BB (PWR_OFFSET + PWR_CR_OFFSET)
-#define PWR_CSR_OFFSET_BB (PWR_OFFSET + PWR_CSR_OFFSET)
-/**
- * @}
- */
-
-/** @defgroup PWR_CR_register_alias PWR CR Register alias address
- * @{
- */
-/* --- CR Register ---*/
-/* Alias word address of LPSDSR bit */
-#define LPSDSR_BIT_NUMBER POSITION_VAL(PWR_CR_LPDS)
-#define CR_LPSDSR_BB ((uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (LPSDSR_BIT_NUMBER * 4)))
-
-/* Alias word address of DBP bit */
-#define DBP_BIT_NUMBER POSITION_VAL(PWR_CR_DBP)
-#define CR_DBP_BB ((uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (DBP_BIT_NUMBER * 4)))
-
-/* Alias word address of PVDE bit */
-#define PVDE_BIT_NUMBER POSITION_VAL(PWR_CR_PVDE)
-#define CR_PVDE_BB ((uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (PVDE_BIT_NUMBER * 4)))
-
-/**
- * @}
- */
-
-/** @defgroup PWR_CSR_register_alias PWR CSR Register alias address
- * @{
- */
-
-/* --- CSR Register ---*/
-/* Alias word address of EWUP1 bit */
-#define CSR_EWUP_BB(VAL) ((uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32) + (POSITION_VAL(VAL) * 4)))
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/** @defgroup PWR_Private_Functions PWR Private Functions
- * brief WFE cortex command overloaded for HAL_PWR_EnterSTOPMode usage only (see Workaround section)
- * @{
- */
-static void PWR_OverloadWfe(void);
-
-/* Private functions ---------------------------------------------------------*/
-__NOINLINE
-static void PWR_OverloadWfe(void)
-{
- __asm volatile( "wfe" );
- __asm volatile( "nop" );
-}
-
-/**
- * @}
- */
-
-
-/** @defgroup PWR_Exported_Functions PWR Exported Functions
- * @{
- */
-
-/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and de-initialization functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization and de-initialization functions #####
- ===============================================================================
- [..]
- After reset, the backup domain (RTC registers, RTC backup data
- registers) is protected against possible unwanted
- write accesses.
- To enable access to the RTC Domain and RTC registers, proceed as follows:
- (+) Enable the Power Controller (PWR) APB1 interface clock using the
- __HAL_RCC_PWR_CLK_ENABLE() macro.
- (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Deinitializes the PWR peripheral registers to their default reset values.
- * @retval None
- */
-void HAL_PWR_DeInit(void)
-{
- __HAL_RCC_PWR_FORCE_RESET();
- __HAL_RCC_PWR_RELEASE_RESET();
-}
-
-/**
- * @brief Enables access to the backup domain (RTC registers, RTC
- * backup data registers ).
- * @note If the HSE divided by 128 is used as the RTC clock, the
- * Backup Domain Access should be kept enabled.
- * @retval None
- */
-void HAL_PWR_EnableBkUpAccess(void)
-{
- /* Enable access to RTC and backup registers */
- *(__IO uint32_t *) CR_DBP_BB = (uint32_t)ENABLE;
-}
-
-/**
- * @brief Disables access to the backup domain (RTC registers, RTC
- * backup data registers).
- * @note If the HSE divided by 128 is used as the RTC clock, the
- * Backup Domain Access should be kept enabled.
- * @retval None
- */
-void HAL_PWR_DisableBkUpAccess(void)
-{
- /* Disable access to RTC and backup registers */
- *(__IO uint32_t *) CR_DBP_BB = (uint32_t)DISABLE;
-}
-
-/**
- * @}
- */
-
-/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions
- * @brief Low Power modes configuration functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral Control functions #####
- ===============================================================================
-
- *** PVD configuration ***
- =========================
- [..]
- (+) The PVD is used to monitor the VDD power supply by comparing it to a
- threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR).
-
- (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower
- than the PVD threshold. This event is internally connected to the EXTI
- line16 and can generate an interrupt if enabled. This is done through
- __HAL_PVD_EXTI_ENABLE_IT() macro.
- (+) The PVD is stopped in Standby mode.
-
- *** WakeUp pin configuration ***
- ================================
- [..]
- (+) WakeUp pin is used to wake up the system from Standby mode. This pin is
- forced in input pull-down configuration and is active on rising edges.
- (+) There is one WakeUp pin:
- WakeUp Pin 1 on PA.00.
-
- [..]
-
- *** Low Power modes configuration ***
- =====================================
- [..]
- The device features 3 low-power modes:
- (+) Sleep mode: CPU clock off, all peripherals including Cortex-M3 core peripherals like
- NVIC, SysTick, etc. are kept running
- (+) Stop mode: All clocks are stopped
- (+) Standby mode: 1.8V domain powered off
-
-
- *** Sleep mode ***
- ==================
- [..]
- (+) Entry:
- The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFx)
- functions with
- (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
- (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
-
- (+) Exit:
- (++) WFI entry mode, Any peripheral interrupt acknowledged by the nested vectored interrupt
- controller (NVIC) can wake up the device from Sleep mode.
- (++) WFE entry mode, Any wakeup event can wake up the device from Sleep mode.
- (+++) Any peripheral interrupt w/o NVIC configuration & SEVONPEND bit set in the Cortex (HAL_PWR_EnableSEVOnPend)
- (+++) Any EXTI Line (Internal or External) configured in Event mode
-
- *** Stop mode ***
- =================
- [..]
- The Stop mode is based on the Cortex-M3 deepsleep mode combined with peripheral
- clock gating. The voltage regulator can be configured either in normal or low-power mode.
- In Stop mode, all clocks in the 1.8 V domain are stopped, the PLL, the HSI and the HSE RC
- oscillators are disabled. SRAM and register contents are preserved.
- In Stop mode, all I/O pins keep the same state as in Run mode.
-
- (+) Entry:
- The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_REGULATOR_VALUE, PWR_SLEEPENTRY_WFx )
- function with:
- (++) PWR_REGULATOR_VALUE= PWR_MAINREGULATOR_ON: Main regulator ON.
- (++) PWR_REGULATOR_VALUE= PWR_LOWPOWERREGULATOR_ON: Low Power regulator ON.
- (++) PWR_SLEEPENTRY_WFx= PWR_SLEEPENTRY_WFI: enter STOP mode with WFI instruction
- (++) PWR_SLEEPENTRY_WFx= PWR_SLEEPENTRY_WFE: enter STOP mode with WFE instruction
- (+) Exit:
- (++) WFI entry mode, Any EXTI Line (Internal or External) configured in Interrupt mode with NVIC configured
- (++) WFE entry mode, Any EXTI Line (Internal or External) configured in Event mode.
-
- *** Standby mode ***
- ====================
- [..]
- The Standby mode allows to achieve the lowest power consumption. It is based on the
- Cortex-M3 deepsleep mode, with the voltage regulator disabled. The 1.8 V domain is
- consequently powered off. The PLL, the HSI oscillator and the HSE oscillator are also
- switched off. SRAM and register contents are lost except for registers in the Backup domain
- and Standby circuitry
-
- (+) Entry:
- (++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function.
- (+) Exit:
- (++) WKUP pin rising edge, RTC alarm event rising edge, external Reset in
- NRSTpin, IWDG Reset
-
- *** Auto-wakeup (AWU) from low-power mode ***
- =============================================
- [..]
-
- (+) The MCU can be woken up from low-power mode by an RTC Alarm event,
- without depending on an external interrupt (Auto-wakeup mode).
-
- (+) RTC auto-wakeup (AWU) from the Stop and Standby modes
-
- (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to
- configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function.
-
- *** PWR Workarounds linked to Silicon Limitation ***
- ====================================================
- [..]
- Below the list of all silicon limitations known on STM32F1xx prouct.
-
- (#)Workarounds Implemented inside PWR HAL Driver
- (##)Debugging Stop mode with WFE entry - overloaded the WFE by an internal function
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).
- * @param sConfigPVD: pointer to an PWR_PVDTypeDef structure that contains the configuration
- * information for the PVD.
- * @note Refer to the electrical characteristics of your device datasheet for
- * more details about the voltage threshold corresponding to each
- * detection level.
- * @retval None
- */
-void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD)
-{
- /* Check the parameters */
- assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel));
- assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode));
-
- /* Set PLS[7:5] bits according to PVDLevel value */
- MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel);
-
- /* Clear any previous config. Keep it clear if no event or IT mode is selected */
- __HAL_PWR_PVD_EXTI_DISABLE_EVENT();
- __HAL_PWR_PVD_EXTI_DISABLE_IT();
- __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
- __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();
-
- /* Configure interrupt mode */
- if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)
- {
- __HAL_PWR_PVD_EXTI_ENABLE_IT();
- }
-
- /* Configure event mode */
- if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT)
- {
- __HAL_PWR_PVD_EXTI_ENABLE_EVENT();
- }
-
- /* Configure the edge */
- if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)
- {
- __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();
- }
-
- if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)
- {
- __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
- }
-}
-
-/**
- * @brief Enables the Power Voltage Detector(PVD).
- * @retval None
- */
-void HAL_PWR_EnablePVD(void)
-{
- /* Enable the power voltage detector */
- *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)ENABLE;
-}
-
-/**
- * @brief Disables the Power Voltage Detector(PVD).
- * @retval None
- */
-void HAL_PWR_DisablePVD(void)
-{
- /* Disable the power voltage detector */
- *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)DISABLE;
-}
-
-/**
- * @brief Enables the WakeUp PINx functionality.
- * @param WakeUpPinx: Specifies the Power Wake-Up pin to enable.
- * This parameter can be one of the following values:
- * @arg PWR_WAKEUP_PIN1
- * @retval None
- */
-void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx)
-{
- /* Check the parameter */
- assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
- /* Enable the EWUPx pin */
- *(__IO uint32_t *) CSR_EWUP_BB(WakeUpPinx) = (uint32_t)ENABLE;
-}
-
-/**
- * @brief Disables the WakeUp PINx functionality.
- * @param WakeUpPinx: Specifies the Power Wake-Up pin to disable.
- * This parameter can be one of the following values:
- * @arg PWR_WAKEUP_PIN1
- * @retval None
- */
-void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
-{
- /* Check the parameter */
- assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
- /* Disable the EWUPx pin */
- *(__IO uint32_t *) CSR_EWUP_BB(WakeUpPinx) = (uint32_t)DISABLE;
-}
-
-/**
- * @brief Enters Sleep mode.
- * @note In Sleep mode, all I/O pins keep the same state as in Run mode.
- * @param Regulator: Regulator state as no effect in SLEEP mode - allows to support portability from legacy software
- * @param SLEEPEntry: Specifies if SLEEP mode is entered with WFI or WFE instruction.
- * When WFI entry is used, tick interrupt have to be disabled if not desired as
- * the interrupt wake up source.
- * This parameter can be one of the following values:
- * @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
- * @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
- * @retval None
- */
-void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry)
-{
- /* Check the parameters */
- /* No check on Regulator because parameter not used in SLEEP mode */
- assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry));
-
- /* Clear SLEEPDEEP bit of Cortex System Control Register */
- CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
-
- /* Select SLEEP mode entry -------------------------------------------------*/
- if(SLEEPEntry == PWR_SLEEPENTRY_WFI)
- {
- /* Request Wait For Interrupt */
- __WFI();
- }
- else
- {
- /* Request Wait For Event */
- __SEV();
- __WFE();
- __WFE();
- }
-}
-
-/**
- * @brief Enters Stop mode.
- * @note In Stop mode, all I/O pins keep the same state as in Run mode.
- * @note When exiting Stop mode by using an interrupt or a wakeup event,
- * HSI RC oscillator is selected as system clock.
- * @note When the voltage regulator operates in low power mode, an additional
- * startup delay is incurred when waking up from Stop mode.
- * By keeping the internal regulator ON during Stop mode, the consumption
- * is higher although the startup time is reduced.
- * @param Regulator: Specifies the regulator state in Stop mode.
- * This parameter can be one of the following values:
- * @arg PWR_MAINREGULATOR_ON: Stop mode with regulator ON
- * @arg PWR_LOWPOWERREGULATOR_ON: Stop mode with low power regulator ON
- * @param STOPEntry: Specifies if Stop mode in entered with WFI or WFE instruction.
- * This parameter can be one of the following values:
- * @arg PWR_STOPENTRY_WFI: Enter Stop mode with WFI instruction
- * @arg PWR_STOPENTRY_WFE: Enter Stop mode with WFE instruction
- * @retval None
- */
-void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
-{
- /* Check the parameters */
- assert_param(IS_PWR_REGULATOR(Regulator));
- assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
-
- /* Clear PDDS bit in PWR register to specify entering in STOP mode when CPU enter in Deepsleep */
- CLEAR_BIT(PWR->CR, PWR_CR_PDDS);
-
- /* Select the voltage regulator mode by setting LPDS bit in PWR register according to Regulator parameter value */
- MODIFY_REG(PWR->CR, PWR_CR_LPDS, Regulator);
-
- /* Set SLEEPDEEP bit of Cortex System Control Register */
- SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
-
- /* Select Stop mode entry --------------------------------------------------*/
- if(STOPEntry == PWR_STOPENTRY_WFI)
- {
- /* Request Wait For Interrupt */
- __WFI();
- }
- else
- {
- /* Request Wait For Event */
- __SEV();
- PWR_OverloadWfe(); /* WFE redefine locally */
- PWR_OverloadWfe(); /* WFE redefine locally */
- }
- /* Reset SLEEPDEEP bit of Cortex System Control Register */
- CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
-}
-
-/**
- * @brief Enters Standby mode.
- * @note In Standby mode, all I/O pins are high impedance except for:
- * - Reset pad (still available)
- * - TAMPER pin if configured for tamper or calibration out.
- * - WKUP pin (PA0) if enabled.
- * @retval None
- */
-void HAL_PWR_EnterSTANDBYMode(void)
-{
- /* Select Standby mode */
- SET_BIT(PWR->CR, PWR_CR_PDDS);
-
- /* Set SLEEPDEEP bit of Cortex System Control Register */
- SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
-
- /* This option is used to ensure that store operations are completed */
-#if defined ( __CC_ARM)
- __force_stores();
-#endif
- /* Request Wait For Interrupt */
- __WFI();
-}
-
-
-/**
- * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode.
- * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor
- * re-enters SLEEP mode when an interruption handling is over.
- * Setting this bit is useful when the processor is expected to run only on
- * interruptions handling.
- * @retval None
- */
-void HAL_PWR_EnableSleepOnExit(void)
-{
- /* Set SLEEPONEXIT bit of Cortex System Control Register */
- SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
-}
-
-
-/**
- * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode.
- * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor
- * re-enters SLEEP mode when an interruption handling is over.
- * @retval None
- */
-void HAL_PWR_DisableSleepOnExit(void)
-{
- /* Clear SLEEPONEXIT bit of Cortex System Control Register */
- CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
-}
-
-
-/**
- * @brief Enables CORTEX M3 SEVONPEND bit.
- * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes
- * WFE to wake up when an interrupt moves from inactive to pended.
- * @retval None
- */
-void HAL_PWR_EnableSEVOnPend(void)
-{
- /* Set SEVONPEND bit of Cortex System Control Register */
- SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
-}
-
-
-/**
- * @brief Disables CORTEX M3 SEVONPEND bit.
- * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes
- * WFE to wake up when an interrupt moves from inactive to pended.
- * @retval None
- */
-void HAL_PWR_DisableSEVOnPend(void)
-{
- /* Clear SEVONPEND bit of Cortex System Control Register */
- CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
-}
-
-
-
-/**
- * @brief This function handles the PWR PVD interrupt request.
- * @note This API should be called under the PVD_IRQHandler().
- * @retval None
- */
-void HAL_PWR_PVD_IRQHandler(void)
-{
- /* Check PWR exti flag */
- if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET)
- {
- /* PWR PVD interrupt user callback */
- HAL_PWR_PVDCallback();
-
- /* Clear PWR Exti pending bit */
- __HAL_PWR_PVD_EXTI_CLEAR_FLAG();
- }
-}
-
-/**
- * @brief PWR PVD interrupt callback
- * @retval None
- */
-__weak void HAL_PWR_PVDCallback(void)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_PWR_PVDCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* HAL_PWR_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c
deleted file mode 100644
index e23f65c..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c
+++ /dev/null
@@ -1,1270 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_rcc.c
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief RCC HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the Reset and Clock Control (RCC) peripheral:
- * + Initialization and de-initialization functions
- * + Peripheral Control functions
- *
- @verbatim
- ==============================================================================
- ##### RCC specific features #####
- ==============================================================================
- [..]
- After reset the device is running from Internal High Speed oscillator
- (HSI 8MHz) with Flash 0 wait state, Flash prefetch buffer is enabled,
- and all peripherals are off except internal SRAM, Flash and JTAG.
- (+) There is no prescaler on High speed (AHB) and Low speed (APB) buses;
- all peripherals mapped on these buses are running at HSI speed.
- (+) The clock for all peripherals is switched off, except the SRAM and FLASH.
- (+) All GPIOs are in input floating state, except the JTAG pins which
- are assigned to be used for debug purpose.
- [..] Once the device started from reset, the user application has to:
- (+) Configure the clock source to be used to drive the System clock
- (if the application needs higher frequency/performance)
- (+) Configure the System clock frequency and Flash settings
- (+) Configure the AHB and APB buses prescalers
- (+) Enable the clock for the peripheral(s) to be used
- (+) Configure the clock source(s) for peripherals whose clocks are not
- derived from the System clock (I2S, RTC, ADC, USB OTG FS)
-
- ##### RCC Limitations #####
- ==============================================================================
- [..]
- A delay between an RCC peripheral clock enable and the effective peripheral
- enabling should be taken into account in order to manage the peripheral read/write
- from/to registers.
- (+) This delay depends on the peripheral mapping.
- (++) AHB & APB peripherals, 1 dummy read is necessary
-
- [..]
- Workarounds:
- (#) For AHB & APB peripherals, a dummy read to the peripheral register has been
- inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
-*/
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @defgroup RCC RCC
-* @brief RCC HAL module driver
- * @{
- */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @defgroup RCC_Private_Constants RCC Private Constants
- * @{
- */
-/* Bits position in in the CFGR register */
-#define RCC_CFGR_HPRE_BITNUMBER POSITION_VAL(RCC_CFGR_HPRE)
-#define RCC_CFGR_PPRE1_BITNUMBER POSITION_VAL(RCC_CFGR_PPRE1)
-#define RCC_CFGR_PPRE2_BITNUMBER POSITION_VAL(RCC_CFGR_PPRE2)
-/**
- * @}
- */
-/* Private macro -------------------------------------------------------------*/
-/** @defgroup RCC_Private_Macros RCC Private Macros
- * @{
- */
-
-#define MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
-#define MCO1_GPIO_PORT GPIOA
-#define MCO1_PIN GPIO_PIN_8
-
-/**
- * @}
- */
-
-/* Private variables ---------------------------------------------------------*/
-/** @defgroup RCC_Private_Variables RCC Private Variables
- * @{
- */
-/**
- * @}
- */
-
-/* Private function prototypes -----------------------------------------------*/
-/* Exported functions ---------------------------------------------------------*/
-
-/** @defgroup RCC_Exported_Functions RCC Exported Functions
- * @{
- */
-
-/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
- @verbatim
- ===============================================================================
- ##### Initialization and de-initialization functions #####
- ===============================================================================
- [..]
- This section provides functions allowing to configure the internal/external oscillators
- (HSE, HSI, LSE, LSI, PLL, CSS and MCO) and the System buses clocks (SYSCLK, AHB, APB1
- and APB2).
-
- [..] Internal/external clock and PLL configuration
- (#) HSI (high-speed internal), 8 MHz factory-trimmed RC used directly or through
- the PLL as System clock source.
- (#) LSI (low-speed internal), ~40 KHz low consumption RC used as IWDG and/or RTC
- clock source.
-
- (#) HSE (high-speed external), 4 to 24 MHz (STM32F100xx) or 4 to 16 MHz (STM32F101x/STM32F102x/STM32F103x) or 3 to 25 MHz (STM32F105x/STM32F107x) crystal oscillator used directly or
- through the PLL as System clock source. Can be used also as RTC clock source.
-
- (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source.
-
- (#) PLL (clocked by HSI or HSE), featuring different output clocks:
- (++) The first output is used to generate the high speed system clock (up to 72 MHz for STM32F10xxx or up to 24 MHz for STM32F100xx)
- (++) The second output is used to generate the clock for the USB OTG FS (48 MHz)
-
- (#) CSS (Clock security system), once enable using the macro __HAL_RCC_CSS_ENABLE()
- and if a HSE clock failure occurs(HSE used directly or through PLL as System
- clock source), the System clocks automatically switched to HSI and an interrupt
- is generated if enabled. The interrupt is linked to the Cortex-M3 NMI
- (Non-Maskable Interrupt) exception vector.
-
- (#) MCO1 (microcontroller clock output), used to output SYSCLK, HSI,
- HSE or PLL clock (divided by 2) on PA8 pin + PLL2CLK, PLL3CLK/2, PLL3CLK and XTI for STM32F105x/STM32F107x
-
- [..] System, AHB and APB buses clocks configuration
- (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI,
- HSE and PLL.
- The AHB clock (HCLK) is derived from System clock through configurable
- prescaler and used to clock the CPU, memory and peripherals mapped
- on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived
- from AHB clock through configurable prescalers and used to clock
- the peripherals mapped on these buses. You can use
- "@ref HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks.
-
- -@- All the peripheral clocks are derived from the System clock (SYSCLK) except:
- (+@) RTC: RTC clock can be derived either from the LSI, LSE or HSE clock
- divided by 128.
- (+@) USB OTG FS and RTC: USB OTG FS require a frequency equal to 48 MHz
- to work correctly. This clock is derived of the main PLL through PLL Multiplier.
- (+@) I2S interface on STM32F105x/STM32F107x can be derived from PLL3CLK
- (+@) IWDG clock which is always the LSI clock.
-
- (#) For STM32F10xxx, the maximum frequency of the SYSCLK and HCLK/PCLK2 is 72 MHz, PCLK1 36 MHz.
- For STM32F100xx, the maximum frequency of the SYSCLK and HCLK/PCLK1/PCLK2 is 24 MHz.
- Depending on the SYSCLK frequency, the flash latency should be adapted accordingly.
- @endverbatim
- * @{
- */
-
-/*
- Additional consideration on the SYSCLK based on Latency settings:
- +-----------------------------------------------+
- | Latency | SYSCLK clock frequency (MHz) |
- |---------------|-------------------------------|
- |0WS(1CPU cycle)| 0 < SYSCLK <= 24 |
- |---------------|-------------------------------|
- |1WS(2CPU cycle)| 24 < SYSCLK <= 48 |
- |---------------|-------------------------------|
- |2WS(3CPU cycle)| 48 < SYSCLK <= 72 |
- +-----------------------------------------------+
- */
-
-/**
- * @brief Resets the RCC clock configuration to the default reset state.
- * @note The default reset state of the clock configuration is given below:
- * - HSI ON and used as system clock source
- * - HSE and PLL OFF
- * - AHB, APB1 and APB2 prescaler set to 1.
- * - CSS and MCO1 OFF
- * - All interrupts disabled
- * @note This function does not modify the configuration of the
- * - Peripheral clocks
- * - LSI, LSE and RTC clocks
- * @retval None
- */
-void HAL_RCC_DeInit(void)
-{
- /* Switch SYSCLK to HSI */
- CLEAR_BIT(RCC->CFGR, RCC_CFGR_SW);
-
- /* Reset HSEON, CSSON, & PLLON bits */
- CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_CSSON | RCC_CR_PLLON);
-
- /* Reset HSEBYP bit */
- CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP);
-
- /* Reset CFGR register */
- CLEAR_REG(RCC->CFGR);
-
- /* Set HSITRIM bits to the reset value */
- MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, ((uint32_t)0x10 << POSITION_VAL(RCC_CR_HSITRIM)));
-
-#if (defined(STM32F105xC) || defined(STM32F107xC) || defined (STM32F100xB) || defined (STM32F100xE))
- /* Reset CFGR2 register */
- CLEAR_REG(RCC->CFGR2);
-
-#endif /* STM32F105xC || STM32F107xC || STM32F100xB || STM32F100xE */
- /* Disable all interrupts */
- CLEAR_REG(RCC->CIR);
-
- /* Update the SystemCoreClock global variable */
- SystemCoreClock = HSI_VALUE;
-}
-
-/**
- * @brief Initializes the RCC Oscillators according to the specified parameters in the
- * RCC_OscInitTypeDef.
- * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that
- * contains the configuration information for the RCC Oscillators.
- * @note The PLL is not disabled when used as system clock.
- * @note The PLL is not disabled when USB OTG FS clock is enabled (specific to devices with USB FS)
- * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not
- * supported by this macro. User should request a transition to LSE Off
- * first and then LSE On or LSE Bypass.
- * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not
- * supported by this macro. User should request a transition to HSE Off
- * first and then HSE On or HSE Bypass.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
-{
- uint32_t tickstart = 0;
-
- /* Check the parameters */
- assert_param(RCC_OscInitStruct != NULL);
- assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType));
-
- /*------------------------------- HSE Configuration ------------------------*/
- if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE)
- {
- /* Check the parameters */
- assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState));
-
- /* When the HSE is used as system clock or clock source for PLL in these cases it is not allowed to be disabled */
- if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSE)
- || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE)))
- {
- if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF))
- {
- return HAL_ERROR;
- }
- }
- else
- {
- /* Set the new HSE configuration ---------------------------------------*/
- __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState);
-
-
- /* Check the HSE State */
- if(RCC_OscInitStruct->HSEState != RCC_HSE_OFF)
- {
- /* Get Start Tick */
- tickstart = HAL_GetTick();
-
- /* Wait till HSE is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- else
- {
- /* Get Start Tick */
- tickstart = HAL_GetTick();
-
- /* Wait till HSE is disabled */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- }
- }
- /*----------------------------- HSI Configuration --------------------------*/
- if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI)
- {
- /* Check the parameters */
- assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState));
- assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue));
-
- /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */
- if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI)
- || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSI_DIV2)))
- {
- /* When HSI is used as system clock it will not disabled */
- if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON))
- {
- return HAL_ERROR;
- }
- /* Otherwise, just the calibration is allowed */
- else
- {
- /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
- __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
- }
- }
- else
- {
- /* Check the HSI State */
- if(RCC_OscInitStruct->HSIState != RCC_HSI_OFF)
- {
- /* Enable the Internal High Speed oscillator (HSI). */
- __HAL_RCC_HSI_ENABLE();
-
- /* Get Start Tick */
- tickstart = HAL_GetTick();
-
- /* Wait till HSI is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
- __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
- }
- else
- {
- /* Disable the Internal High Speed oscillator (HSI). */
- __HAL_RCC_HSI_DISABLE();
-
- /* Get Start Tick */
- tickstart = HAL_GetTick();
-
- /* Wait till HSI is disabled */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- }
- }
- /*------------------------------ LSI Configuration -------------------------*/
- if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI)
- {
- /* Check the parameters */
- assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState));
-
- /* Check the LSI State */
- if(RCC_OscInitStruct->LSIState != RCC_LSI_OFF)
- {
- /* Enable the Internal Low Speed oscillator (LSI). */
- __HAL_RCC_LSI_ENABLE();
-
- /* Get Start Tick */
- tickstart = HAL_GetTick();
-
- /* Wait till LSI is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- /* To have a fully stabilized clock in the specified range, a software delay of 1ms
- should be added.*/
- HAL_Delay(1);
- }
- else
- {
- /* Disable the Internal Low Speed oscillator (LSI). */
- __HAL_RCC_LSI_DISABLE();
-
- /* Get Start Tick */
- tickstart = HAL_GetTick();
-
- /* Wait till LSI is disabled */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- }
- /*------------------------------ LSE Configuration -------------------------*/
- if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)
- {
- /* Check the parameters */
- assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState));
-
- /* Enable Power Clock*/
- __HAL_RCC_PWR_CLK_ENABLE();
-
- /* Enable write access to Backup domain */
- SET_BIT(PWR->CR, PWR_CR_DBP);
-
- /* Wait for Backup domain Write protection disable */
- tickstart = HAL_GetTick();
-
- while((PWR->CR & PWR_CR_DBP) == RESET)
- {
- if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Set the new LSE configuration -----------------------------------------*/
- __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState);
- /* Check the LSE State */
- if(RCC_OscInitStruct->LSEState != RCC_LSE_OFF)
- {
- /* Get Start Tick */
- tickstart = HAL_GetTick();
-
- /* Wait till LSE is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- else
- {
- /* Get Start Tick */
- tickstart = HAL_GetTick();
-
- /* Wait till LSE is disabled */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- }
-
-#if defined(RCC_CR_PLL2ON)
- /*-------------------------------- PLL2 Configuration -----------------------*/
- /* Check the parameters */
- assert_param(IS_RCC_PLL2(RCC_OscInitStruct->PLL2.PLL2State));
- if ((RCC_OscInitStruct->PLL2.PLL2State) != RCC_PLL2_NONE)
- {
- /* This bit can not be cleared if the PLL2 clock is used indirectly as system
- clock (i.e. it is used as PLL clock entry that is used as system clock). */
- if((__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE) && \
- (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && \
- ((READ_BIT(RCC->CFGR2,RCC_CFGR2_PREDIV1SRC)) == RCC_CFGR2_PREDIV1SRC_PLL2))
- {
- return HAL_ERROR;
- }
- else
- {
- if((RCC_OscInitStruct->PLL2.PLL2State) == RCC_PLL2_ON)
- {
- /* Check the parameters */
- assert_param(IS_RCC_PLL2_MUL(RCC_OscInitStruct->PLL2.PLL2MUL));
- assert_param(IS_RCC_HSE_PREDIV2(RCC_OscInitStruct->PLL2.HSEPrediv2Value));
-
- /* Prediv2 can be written only when the PLLI2S is disabled. */
- /* Return an error only if new value is different from the programmed value */
- if (HAL_IS_BIT_SET(RCC->CR,RCC_CR_PLL3ON) && \
- (__HAL_RCC_HSE_GET_PREDIV2() != RCC_OscInitStruct->PLL2.HSEPrediv2Value))
- {
- return HAL_ERROR;
- }
-
- /* Disable the main PLL2. */
- __HAL_RCC_PLL2_DISABLE();
-
- /* Get Start Tick */
- tickstart = HAL_GetTick();
-
- /* Wait till PLL2 is disabled */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLL2_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Configure the HSE prediv2 factor --------------------------------*/
- __HAL_RCC_HSE_PREDIV2_CONFIG(RCC_OscInitStruct->PLL2.HSEPrediv2Value);
-
- /* Configure the main PLL2 multiplication factors. */
- __HAL_RCC_PLL2_CONFIG(RCC_OscInitStruct->PLL2.PLL2MUL);
-
- /* Enable the main PLL2. */
- __HAL_RCC_PLL2_ENABLE();
-
- /* Get Start Tick */
- tickstart = HAL_GetTick();
-
- /* Wait till PLL2 is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLL2_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- else
- {
- /* Set PREDIV1 source to HSE */
- CLEAR_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC);
-
- /* Disable the main PLL2. */
- __HAL_RCC_PLL2_DISABLE();
-
- /* Get Start Tick */
- tickstart = HAL_GetTick();
-
- /* Wait till PLL2 is disabled */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLL2_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- }
- }
-
-#endif /* RCC_CR_PLL2ON */
- /*-------------------------------- PLL Configuration -----------------------*/
- /* Check the parameters */
- assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState));
- if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE)
- {
- /* Check if the PLL is used as system clock or not */
- if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
- {
- if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON)
- {
- /* Check the parameters */
- assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource));
- assert_param(IS_RCC_PLL_MUL(RCC_OscInitStruct->PLL.PLLMUL));
-
- /* Disable the main PLL. */
- __HAL_RCC_PLL_DISABLE();
-
- /* Get Start Tick */
- tickstart = HAL_GetTick();
-
- /* Wait till PLL is disabled */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Configure the HSE prediv factor --------------------------------*/
- /* It can be written only when the PLL is disabled. Not used in PLL source is different than HSE */
- if(RCC_OscInitStruct->PLL.PLLSource == RCC_PLLSOURCE_HSE)
- {
- /* Check the parameter */
- assert_param(IS_RCC_HSE_PREDIV(RCC_OscInitStruct->HSEPredivValue));
-#if defined(RCC_CFGR2_PREDIV1SRC)
- assert_param(IS_RCC_PREDIV1_SOURCE(RCC_OscInitStruct->Prediv1Source));
-
- /* Set PREDIV1 source */
- SET_BIT(RCC->CFGR2, RCC_OscInitStruct->Prediv1Source);
-#endif /* RCC_CFGR2_PREDIV1SRC */
-
- /* Set PREDIV1 Value */
- __HAL_RCC_HSE_PREDIV_CONFIG(RCC_OscInitStruct->HSEPredivValue);
- }
-
- /* Configure the main PLL clock source and multiplication factors. */
- __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource,
- RCC_OscInitStruct->PLL.PLLMUL);
- /* Enable the main PLL. */
- __HAL_RCC_PLL_ENABLE();
-
- /* Get Start Tick */
- tickstart = HAL_GetTick();
-
- /* Wait till PLL is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- else
- {
- /* Disable the main PLL. */
- __HAL_RCC_PLL_DISABLE();
-
- /* Get Start Tick */
- tickstart = HAL_GetTick();
-
- /* Wait till PLL is disabled */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- }
- else
- {
- return HAL_ERROR;
- }
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CPU, AHB and APB buses clocks according to the specified
- * parameters in the RCC_ClkInitStruct.
- * @param RCC_ClkInitStruct pointer to an RCC_OscInitTypeDef structure that
- * contains the configuration information for the RCC peripheral.
- * @param FLatency FLASH Latency
- * The value of this parameter depend on device used within the same series
- * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency
- * and updated by @ref HAL_RCC_GetHCLKFreq() function called within this function
- *
- * @note The HSI is used (enabled by hardware) as system clock source after
- * start-up from Reset, wake-up from STOP and STANDBY mode, or in case
- * of failure of the HSE used directly or indirectly as system clock
- * (if the Clock Security System CSS is enabled).
- *
- * @note A switch from one clock source to another occurs only if the target
- * clock source is ready (clock stable after start-up delay or PLL locked).
- * If a clock source which is not yet ready is selected, the switch will
- * occur when the clock source will be ready.
- * You can use @ref HAL_RCC_GetClockConfig() function to know which clock is
- * currently used as system clock source.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency)
-{
- uint32_t tickstart = 0;
-
- /* Check the parameters */
- assert_param(RCC_ClkInitStruct != NULL);
- assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType));
- assert_param(IS_FLASH_LATENCY(FLatency));
-
- /* To correctly read data from FLASH memory, the number of wait states (LATENCY)
- must be correctly programmed according to the frequency of the CPU clock
- (HCLK) of the device. */
-
-#if defined(FLASH_ACR_LATENCY)
- /* Increasing the number of wait states because of higher CPU frequency */
- if(FLatency > (FLASH->ACR & FLASH_ACR_LATENCY))
- {
- /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
- __HAL_FLASH_SET_LATENCY(FLatency);
-
- /* Check that the new number of wait states is taken into account to access the Flash
- memory by reading the FLASH_ACR register */
- if((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency)
- {
- return HAL_ERROR;
- }
- }
-
-#endif /* FLASH_ACR_LATENCY */
- /*-------------------------- HCLK Configuration --------------------------*/
- if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK)
- {
- assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider));
- MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider);
- }
-
- /*------------------------- SYSCLK Configuration ---------------------------*/
- if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK)
- {
- assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource));
-
- /* HSE is selected as System Clock Source */
- if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
- {
- /* Check the HSE ready flag */
- if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
- {
- return HAL_ERROR;
- }
- }
- /* PLL is selected as System Clock Source */
- else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
- {
- /* Check the PLL ready flag */
- if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
- {
- return HAL_ERROR;
- }
- }
- /* HSI is selected as System Clock Source */
- else
- {
- /* Check the HSI ready flag */
- if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
- {
- return HAL_ERROR;
- }
- }
- __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource);
-
- /* Get Start Tick */
- tickstart = HAL_GetTick();
-
- if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
- {
- while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSE)
- {
- if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
- {
- while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
- {
- if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- else
- {
- while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSI)
- {
- if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- }
-#if defined(FLASH_ACR_LATENCY)
- /* Decreasing the number of wait states because of lower CPU frequency */
- if(FLatency < (FLASH->ACR & FLASH_ACR_LATENCY))
- {
- /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
- __HAL_FLASH_SET_LATENCY(FLatency);
-
- /* Check that the new number of wait states is taken into account to access the Flash
- memory by reading the FLASH_ACR register */
- if((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency)
- {
- return HAL_ERROR;
- }
- }
-#endif /* FLASH_ACR_LATENCY */
-
- /*-------------------------- PCLK1 Configuration ---------------------------*/
- if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)
- {
- assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider));
- MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider);
- }
-
- /*-------------------------- PCLK2 Configuration ---------------------------*/
- if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2)
- {
- assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider));
- MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3));
- }
-
- /* Update the SystemCoreClock global variable */
- SystemCoreClock = HAL_RCC_GetSysClockFreq() >> AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> RCC_CFGR_HPRE_BITNUMBER];
-
- /* Configure the source of time base considering new system clocks settings*/
- HAL_InitTick (TICK_INT_PRIORITY);
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions
- * @brief RCC clocks control functions
- *
- @verbatim
- ===============================================================================
- ##### Peripheral Control functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to control the RCC Clocks
- frequencies.
-
- @endverbatim
- * @{
- */
-
-/**
- * @brief Selects the clock source to output on MCO pin.
- * @note MCO pin should be configured in alternate function mode.
- * @param RCC_MCOx specifies the output direction for the clock source.
- * This parameter can be one of the following values:
- * @arg @ref RCC_MCO1 Clock source to output on MCO1 pin(PA8).
- * @param RCC_MCOSource specifies the clock source to output.
- * This parameter can be one of the following values:
- * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock
- * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock selected as MCO clock
- * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock
- * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock
- @if STM32F105xC
- * @arg @ref RCC_MCO1SOURCE_PLLCLK PLL clock divided by 2 selected as MCO source
- * @arg @ref RCC_MCO1SOURCE_PLL2CLK PLL2 clock selected as MCO source
- * @arg @ref RCC_MCO1SOURCE_PLL3CLK_DIV2 PLL3 clock divided by 2 selected as MCO source
- * @arg @ref RCC_MCO1SOURCE_EXT_HSE XT1 external 3-25 MHz oscillator clock selected as MCO source
- * @arg @ref RCC_MCO1SOURCE_PLL3CLK PLL3 clock selected as MCO source
- @endif
- @if STM32F107xC
- * @arg @ref RCC_MCO1SOURCE_PLLCLK PLL clock divided by 2 selected as MCO source
- * @arg @ref RCC_MCO1SOURCE_PLL2CLK PLL2 clock selected as MCO source
- * @arg @ref RCC_MCO1SOURCE_PLL3CLK_DIV2 PLL3 clock divided by 2 selected as MCO source
- * @arg @ref RCC_MCO1SOURCE_EXT_HSE XT1 external 3-25 MHz oscillator clock selected as MCO source
- * @arg @ref RCC_MCO1SOURCE_PLL3CLK PLL3 clock selected as MCO source
- @endif
- * @param RCC_MCODiv specifies the MCO DIV.
- * This parameter can be one of the following values:
- * @arg @ref RCC_MCODIV_1 no division applied to MCO clock
- * @retval None
- */
-void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv)
-{
- GPIO_InitTypeDef gpio = {0};
-
- /* Check the parameters */
- assert_param(IS_RCC_MCO(RCC_MCOx));
- assert_param(IS_RCC_MCODIV(RCC_MCODiv));
- assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource));
-
- /* Configure the MCO1 pin in alternate function mode */
- gpio.Mode = GPIO_MODE_AF_PP;
- gpio.Speed = GPIO_SPEED_FREQ_HIGH;
- gpio.Pull = GPIO_NOPULL;
- gpio.Pin = MCO1_PIN;
-
- /* MCO1 Clock Enable */
- MCO1_CLK_ENABLE();
-
- HAL_GPIO_Init(MCO1_GPIO_PORT, &gpio);
-
- /* Configure the MCO clock source */
- __HAL_RCC_MCO1_CONFIG(RCC_MCOSource, RCC_MCODiv);
-}
-
-/**
- * @brief Enables the Clock Security System.
- * @note If a failure is detected on the HSE oscillator clock, this oscillator
- * is automatically disabled and an interrupt is generated to inform the
- * software about the failure (Clock Security System Interrupt, CSSI),
- * allowing the MCU to perform rescue operations. The CSSI is linked to
- * the Cortex-M3 NMI (Non-Maskable Interrupt) exception vector.
- * @retval None
- */
-void HAL_RCC_EnableCSS(void)
-{
- *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)ENABLE;
-}
-
-/**
- * @brief Disables the Clock Security System.
- * @retval None
- */
-void HAL_RCC_DisableCSS(void)
-{
- *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)DISABLE;
-}
-
-/**
- * @brief Returns the SYSCLK frequency
- * @note The system frequency computed by this function is not the real
- * frequency in the chip. It is calculated based on the predefined
- * constant and the selected clock source:
- * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*)
- * @note If SYSCLK source is HSE, function returns a value based on HSE_VALUE
- * divided by PREDIV factor(**)
- * @note If SYSCLK source is PLL, function returns a value based on HSE_VALUE
- * divided by PREDIV factor(**) or HSI_VALUE(*) multiplied by the PLL factor.
- * @note (*) HSI_VALUE is a constant defined in stm32f1xx_hal_conf.h file (default value
- * 8 MHz) but the real value may vary depending on the variations
- * in voltage and temperature.
- * @note (**) HSE_VALUE is a constant defined in stm32f1xx_hal_conf.h file (default value
- * 8 MHz), user has to ensure that HSE_VALUE is same as the real
- * frequency of the crystal used. Otherwise, this function may
- * have wrong result.
- *
- * @note The result of this function could be not correct when using fractional
- * value for HSE crystal.
- *
- * @note This function can be used by the user application to compute the
- * baud-rate for the communication peripherals or configure other parameters.
- *
- * @note Each time SYSCLK changes, this function must be called to update the
- * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect.
- *
- * @retval SYSCLK frequency
- */
-uint32_t HAL_RCC_GetSysClockFreq(void)
-{
-#if defined(RCC_CFGR2_PREDIV1SRC)
- const uint8_t aPLLMULFactorTable[12] = {0, 0, 4, 5, 6, 7, 8, 9, 0, 0, 0, 13};
- const uint8_t aPredivFactorTable[16] = { 1, 2, 3, 4, 5, 6, 7, 8, 9,10, 11, 12, 13, 14, 15, 16};
-#else
- const uint8_t aPLLMULFactorTable[16] = { 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 16};
-#if defined(RCC_CFGR2_PREDIV1)
- const uint8_t aPredivFactorTable[16] = { 1, 2, 3, 4, 5, 6, 7, 8, 9,10, 11, 12, 13, 14, 15, 16};
-#else
- const uint8_t aPredivFactorTable[2] = { 1, 2};
-#endif /*RCC_CFGR2_PREDIV1*/
-
-#endif
- uint32_t tmpreg = 0, prediv = 0, pllclk = 0, pllmul = 0;
- uint32_t sysclockfreq = 0;
-#if defined(RCC_CFGR2_PREDIV1SRC)
- uint32_t prediv2 = 0, pll2mul = 0;
-#endif /*RCC_CFGR2_PREDIV1SRC*/
-
- tmpreg = RCC->CFGR;
-
- /* Get SYSCLK source -------------------------------------------------------*/
- switch (tmpreg & RCC_CFGR_SWS)
- {
- case RCC_SYSCLKSOURCE_STATUS_HSE: /* HSE used as system clock */
- {
- sysclockfreq = HSE_VALUE;
- break;
- }
- case RCC_SYSCLKSOURCE_STATUS_PLLCLK: /* PLL used as system clock */
- {
- pllmul = aPLLMULFactorTable[(uint32_t)(tmpreg & RCC_CFGR_PLLMULL) >> POSITION_VAL(RCC_CFGR_PLLMULL)];
- if ((tmpreg & RCC_CFGR_PLLSRC) != RCC_PLLSOURCE_HSI_DIV2)
- {
-#if defined(RCC_CFGR2_PREDIV1)
- prediv = aPredivFactorTable[(uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV1) >> POSITION_VAL(RCC_CFGR2_PREDIV1)];
-#else
- prediv = aPredivFactorTable[(uint32_t)(RCC->CFGR & RCC_CFGR_PLLXTPRE) >> POSITION_VAL(RCC_CFGR_PLLXTPRE)];
-#endif /*RCC_CFGR2_PREDIV1*/
-#if defined(RCC_CFGR2_PREDIV1SRC)
-
- if(HAL_IS_BIT_SET(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC))
- {
- /* PLL2 selected as Prediv1 source */
- /* PLLCLK = PLL2CLK / PREDIV1 * PLLMUL with PLL2CLK = HSE/PREDIV2 * PLL2MUL */
- prediv2 = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> POSITION_VAL(RCC_CFGR2_PREDIV2)) + 1;
- pll2mul = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> POSITION_VAL(RCC_CFGR2_PLL2MUL)) + 2;
- pllclk = (uint32_t)((((HSE_VALUE / prediv2) * pll2mul) / prediv) * pllmul);
- }
- else
- {
- /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV1 * PLLMUL */
- pllclk = (uint32_t)((HSE_VALUE / prediv) * pllmul);
- }
-
- /* If PLLMUL was set to 13 means that it was to cover the case PLLMUL 6.5 (avoid using float) */
- /* In this case need to divide pllclk by 2 */
- if (pllmul == aPLLMULFactorTable[(uint32_t)(RCC_CFGR_PLLMULL6_5) >> POSITION_VAL(RCC_CFGR_PLLMULL)])
- {
- pllclk = pllclk / 2;
- }
-#else
- /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV1 * PLLMUL */
- pllclk = (uint32_t)((HSE_VALUE / prediv) * pllmul);
-#endif /*RCC_CFGR2_PREDIV1SRC*/
- }
- else
- {
- /* HSI used as PLL clock source : PLLCLK = HSI/2 * PLLMUL */
- pllclk = (uint32_t)((HSI_VALUE >> 1) * pllmul);
- }
- sysclockfreq = pllclk;
- break;
- }
- case RCC_SYSCLKSOURCE_STATUS_HSI: /* HSI used as system clock source */
- default: /* HSI used as system clock */
- {
- sysclockfreq = HSI_VALUE;
- break;
- }
- }
- return sysclockfreq;
-}
-
-/**
- * @brief Returns the HCLK frequency
- * @note Each time HCLK changes, this function must be called to update the
- * right HCLK value. Otherwise, any configuration based on this function will be incorrect.
- *
- * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency
- * and updated within this function
- * @retval HCLK frequency
- */
-uint32_t HAL_RCC_GetHCLKFreq(void)
-{
- return SystemCoreClock;
-}
-
-/**
- * @brief Returns the PCLK1 frequency
- * @note Each time PCLK1 changes, this function must be called to update the
- * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect.
- * @retval PCLK1 frequency
- */
-uint32_t HAL_RCC_GetPCLK1Freq(void)
-{
- /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/
- return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE1) >> RCC_CFGR_PPRE1_BITNUMBER]);
-}
-
-/**
- * @brief Returns the PCLK2 frequency
- * @note Each time PCLK2 changes, this function must be called to update the
- * right PCLK2 value. Otherwise, any configuration based on this function will be incorrect.
- * @retval PCLK2 frequency
- */
-uint32_t HAL_RCC_GetPCLK2Freq(void)
-{
- /* Get HCLK source and Compute PCLK2 frequency ---------------------------*/
- return (HAL_RCC_GetHCLKFreq()>> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE2) >> RCC_CFGR_PPRE2_BITNUMBER]);
-}
-
-/**
- * @brief Configures the RCC_OscInitStruct according to the internal
- * RCC configuration registers.
- * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that
- * will be configured.
- * @retval None
- */
-void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
-{
- /* Check the parameters */
- assert_param(RCC_OscInitStruct != NULL);
-
- /* Set all possible values for the Oscillator type parameter ---------------*/
- RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI \
- | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI;
-
-#if defined(RCC_CFGR2_PREDIV1SRC)
- /* Get the Prediv1 source --------------------------------------------------*/
- RCC_OscInitStruct->Prediv1Source = READ_BIT(RCC->CFGR2,RCC_CFGR2_PREDIV1SRC);
-#endif /* RCC_CFGR2_PREDIV1SRC */
-
- /* Get the HSE configuration -----------------------------------------------*/
- if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP)
- {
- RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS;
- }
- else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON)
- {
- RCC_OscInitStruct->HSEState = RCC_HSE_ON;
- }
- else
- {
- RCC_OscInitStruct->HSEState = RCC_HSE_OFF;
- }
- RCC_OscInitStruct->HSEPredivValue = __HAL_RCC_HSE_GET_PREDIV();
-
- /* Get the HSI configuration -----------------------------------------------*/
- if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION)
- {
- RCC_OscInitStruct->HSIState = RCC_HSI_ON;
- }
- else
- {
- RCC_OscInitStruct->HSIState = RCC_HSI_OFF;
- }
-
- RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR & RCC_CR_HSITRIM) >> POSITION_VAL(RCC_CR_HSITRIM));
-
- /* Get the LSE configuration -----------------------------------------------*/
- if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP)
- {
- RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS;
- }
- else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON)
- {
- RCC_OscInitStruct->LSEState = RCC_LSE_ON;
- }
- else
- {
- RCC_OscInitStruct->LSEState = RCC_LSE_OFF;
- }
-
- /* Get the LSI configuration -----------------------------------------------*/
- if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION)
- {
- RCC_OscInitStruct->LSIState = RCC_LSI_ON;
- }
- else
- {
- RCC_OscInitStruct->LSIState = RCC_LSI_OFF;
- }
-
-
- /* Get the PLL configuration -----------------------------------------------*/
- if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON)
- {
- RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON;
- }
- else
- {
- RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF;
- }
- RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->CFGR & RCC_CFGR_PLLSRC);
- RCC_OscInitStruct->PLL.PLLMUL = (uint32_t)(RCC->CFGR & RCC_CFGR_PLLMULL);
-#if defined(RCC_CR_PLL2ON)
- /* Get the PLL2 configuration -----------------------------------------------*/
- if((RCC->CR &RCC_CR_PLL2ON) == RCC_CR_PLL2ON)
- {
- RCC_OscInitStruct->PLL2.PLL2State = RCC_PLL2_ON;
- }
- else
- {
- RCC_OscInitStruct->PLL2.PLL2State = RCC_PLL2_OFF;
- }
- RCC_OscInitStruct->PLL2.HSEPrediv2Value = __HAL_RCC_HSE_GET_PREDIV2();
- RCC_OscInitStruct->PLL2.PLL2MUL = (uint32_t)(RCC->CFGR2 & RCC_CFGR2_PLL2MUL);
-#endif /* RCC_CR_PLL2ON */
-}
-
-/**
- * @brief Get the RCC_ClkInitStruct according to the internal
- * RCC configuration registers.
- * @param RCC_ClkInitStruct pointer to an RCC_ClkInitTypeDef structure that
- * contains the current clock configuration.
- * @param pFLatency Pointer on the Flash Latency.
- * @retval None
- */
-void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency)
-{
- /* Check the parameters */
- assert_param(RCC_ClkInitStruct != NULL);
- assert_param(pFLatency != NULL);
-
- /* Set all possible values for the Clock type parameter --------------------*/
- RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
-
- /* Get the SYSCLK configuration --------------------------------------------*/
- RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW);
-
- /* Get the HCLK configuration ----------------------------------------------*/
- RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE);
-
- /* Get the APB1 configuration ----------------------------------------------*/
- RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE1);
-
- /* Get the APB2 configuration ----------------------------------------------*/
- RCC_ClkInitStruct->APB2CLKDivider = (uint32_t)((RCC->CFGR & RCC_CFGR_PPRE2) >> 3);
-
-#if defined(FLASH_ACR_LATENCY)
- /* Get the Flash Wait State (Latency) configuration ------------------------*/
- *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY);
-#else
- /* For VALUE lines devices, only LATENCY_0 can be set*/
- *pFLatency = (uint32_t)FLASH_LATENCY_0;
-#endif
-}
-
-/**
- * @brief This function handles the RCC CSS interrupt request.
- * @note This API should be called under the NMI_Handler().
- * @retval None
- */
-void HAL_RCC_NMI_IRQHandler(void)
-{
- /* Check RCC CSSF flag */
- if(__HAL_RCC_GET_IT(RCC_IT_CSS))
- {
- /* RCC Clock Security System interrupt user callback */
- HAL_RCC_CSSCallback();
-
- /* Clear RCC CSS pending bit */
- __HAL_RCC_CLEAR_IT(RCC_IT_CSS);
- }
-}
-
-/**
- * @brief RCC Clock Security System interrupt callback
- * @retval none
- */
-__weak void HAL_RCC_CSSCallback(void)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_RCC_CSSCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* HAL_RCC_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c
deleted file mode 100644
index 7f863f5..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c
+++ /dev/null
@@ -1,870 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_rcc_ex.c
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief Extended RCC HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities RCC extension peripheral:
- * + Extended Peripheral Control functions
- *
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-
-/** @defgroup RCCEx RCCEx
- * @brief RCC Extension HAL module driver.
- * @{
- */
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @defgroup RCCEx_Private_Constants RCCEx Private Constants
- * @{
- */
-/**
- * @}
- */
-
-/* Private macro -------------------------------------------------------------*/
-/** @defgroup RCCEx_Private_Macros RCCEx Private Macros
- * @{
- */
-/**
- * @}
- */
-
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions
- * @{
- */
-
-/** @defgroup RCCEx_Exported_Functions_Group1 Peripheral Control functions
- * @brief Extended Peripheral Control functions
- *
-@verbatim
- ===============================================================================
- ##### Extended Peripheral Control functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to control the RCC Clocks
- frequencies.
- [..]
- (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to
- select the RTC clock source; in this case the Backup domain will be reset in
- order to modify the RTC Clock source, as consequence RTC registers (including
- the backup registers) are set to their reset values.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the RCC extended peripherals clocks according to the specified parameters in the
- * RCC_PeriphCLKInitTypeDef.
- * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that
- * contains the configuration information for the Extended Peripherals clocks(RTC clock).
- *
- * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select
- * the RTC clock source; in this case the Backup domain will be reset in
- * order to modify the RTC Clock source, as consequence RTC registers (including
- * the backup registers) are set to their reset values.
- *
- * @note In case of STM32F105xC or STM32F107xC devices, PLLI2S will be enabled if requested on
- * one of 2 I2S interfaces. When PLLI2S is enabled, you need to call HAL_RCCEx_DisablePLLI2S to
- * manually disable it.
- *
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
-{
- uint32_t tickstart = 0, temp_reg = 0;
-#if defined(STM32F105xC) || defined(STM32F107xC)
- uint32_t pllactive = 0;
-#endif /* STM32F105xC || STM32F107xC */
-
- /* Check the parameters */
- assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
-
- /*------------------------------- RTC/LCD Configuration ------------------------*/
- if ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC))
- {
- /* check for RTC Parameters used to output RTCCLK */
- assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection));
-
- /* Enable Power Clock*/
- __HAL_RCC_PWR_CLK_ENABLE();
-
- /* Enable write access to Backup domain */
- SET_BIT(PWR->CR, PWR_CR_DBP);
-
- /* Wait for Backup domain Write protection disable */
- tickstart = HAL_GetTick();
-
- while((PWR->CR & PWR_CR_DBP) == RESET)
- {
- if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */
- temp_reg = (RCC->BDCR & RCC_BDCR_RTCSEL);
- if((temp_reg != 0x00000000U) && (temp_reg != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL)))
- {
- /* Store the content of BDCR register before the reset of Backup Domain */
- temp_reg = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
- /* RTC Clock selection can be changed only if the Backup Domain is reset */
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
- /* Restore the Content of BDCR register */
- RCC->BDCR = temp_reg;
-
- /* Wait for LSERDY if LSE was enabled */
- if (HAL_IS_BIT_SET(temp_reg, RCC_BDCR_LSEON))
- {
- /* Get timeout */
- tickstart = HAL_GetTick();
-
- /* Wait till LSE is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
- {
- if((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- }
- __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
- }
-
- /*------------------------------ ADC clock Configuration ------------------*/
- if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC)
- {
- /* Check the parameters */
- assert_param(IS_RCC_ADCPLLCLK_DIV(PeriphClkInit->AdcClockSelection));
-
- /* Configure the ADC clock source */
- __HAL_RCC_ADC_CONFIG(PeriphClkInit->AdcClockSelection);
- }
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
- /*------------------------------ I2S2 Configuration ------------------------*/
- if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2)
- {
- /* Check the parameters */
- assert_param(IS_RCC_I2S2CLKSOURCE(PeriphClkInit->I2s2ClockSelection));
-
- /* Configure the I2S2 clock source */
- __HAL_RCC_I2S2_CONFIG(PeriphClkInit->I2s2ClockSelection);
- }
-
- /*------------------------------ I2S3 Configuration ------------------------*/
- if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S3) == RCC_PERIPHCLK_I2S3)
- {
- /* Check the parameters */
- assert_param(IS_RCC_I2S3CLKSOURCE(PeriphClkInit->I2s3ClockSelection));
-
- /* Configure the I2S3 clock source */
- __HAL_RCC_I2S3_CONFIG(PeriphClkInit->I2s3ClockSelection);
- }
-
- /*------------------------------ PLL I2S Configuration ----------------------*/
- /* Check that PLLI2S need to be enabled */
- if (HAL_IS_BIT_SET(RCC->CFGR2, RCC_CFGR2_I2S2SRC) || HAL_IS_BIT_SET(RCC->CFGR2, RCC_CFGR2_I2S3SRC))
- {
- /* Update flag to indicate that PLL I2S should be active */
- pllactive = 1;
- }
-
- /* Check if PLL I2S need to be enabled */
- if (pllactive == 1)
- {
- /* Enable PLL I2S only if not active */
- if (HAL_IS_BIT_CLR(RCC->CR, RCC_CR_PLL3ON))
- {
- /* Check the parameters */
- assert_param(IS_RCC_PLLI2S_MUL(PeriphClkInit->PLLI2S.PLLI2SMUL));
- assert_param(IS_RCC_HSE_PREDIV2(PeriphClkInit->PLLI2S.HSEPrediv2Value));
-
- /* Prediv2 can be written only when the PLL2 is disabled. */
- /* Return an error only if new value is different from the programmed value */
- if (HAL_IS_BIT_SET(RCC->CR,RCC_CR_PLL2ON) && \
- (__HAL_RCC_HSE_GET_PREDIV2() != PeriphClkInit->PLLI2S.HSEPrediv2Value))
- {
- return HAL_ERROR;
- }
-
- /* Configure the HSE prediv2 factor --------------------------------*/
- __HAL_RCC_HSE_PREDIV2_CONFIG(PeriphClkInit->PLLI2S.HSEPrediv2Value);
-
- /* Configure the main PLLI2S multiplication factors. */
- __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SMUL);
-
- /* Enable the main PLLI2S. */
- __HAL_RCC_PLLI2S_ENABLE();
-
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till PLLI2S is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- else
- {
- /* Return an error only if user wants to change the PLLI2SMUL whereas PLLI2S is active */
- if (READ_BIT(RCC->CFGR2, RCC_CFGR2_PLL3MUL) != PeriphClkInit->PLLI2S.PLLI2SMUL)
- {
- return HAL_ERROR;
- }
- }
- }
-#endif /* STM32F105xC || STM32F107xC */
-
-#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\
- || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\
- || defined(STM32F105xC) || defined(STM32F107xC)
- /*------------------------------ USB clock Configuration ------------------*/
- if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB)
- {
- /* Check the parameters */
- assert_param(IS_RCC_USBPLLCLK_DIV(PeriphClkInit->UsbClockSelection));
-
- /* Configure the USB clock source */
- __HAL_RCC_USB_CONFIG(PeriphClkInit->UsbClockSelection);
- }
-#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
-
- return HAL_OK;
-}
-
-/**
- * @brief Get the PeriphClkInit according to the internal
- * RCC configuration registers.
- * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that
- * returns the configuration information for the Extended Peripherals clocks(RTC, I2S, ADC clocks).
- * @retval None
- */
-void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
-{
- uint32_t srcclk = 0;
-
- /* Set all possible values for the extended clock type parameter------------*/
- PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_RTC;
-
- /* Get the RTC configuration -----------------------------------------------*/
- srcclk = __HAL_RCC_GET_RTC_SOURCE();
- /* Source clock is LSE or LSI*/
- PeriphClkInit->RTCClockSelection = srcclk;
-
- /* Get the ADC clock configuration -----------------------------------------*/
- PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_ADC;
- PeriphClkInit->AdcClockSelection = __HAL_RCC_GET_ADC_SOURCE();
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
- /* Get the I2S2 clock configuration -----------------------------------------*/
- PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S2;
- PeriphClkInit->I2s2ClockSelection = __HAL_RCC_GET_I2S2_SOURCE();
-
- /* Get the I2S3 clock configuration -----------------------------------------*/
- PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S3;
- PeriphClkInit->I2s3ClockSelection = __HAL_RCC_GET_I2S3_SOURCE();
-
-#endif /* STM32F105xC || STM32F107xC */
-
-#if defined(STM32F103xE) || defined(STM32F103xG)
- /* Get the I2S2 clock configuration -----------------------------------------*/
- PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S2;
- PeriphClkInit->I2s2ClockSelection = RCC_I2S2CLKSOURCE_SYSCLK;
-
- /* Get the I2S3 clock configuration -----------------------------------------*/
- PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S3;
- PeriphClkInit->I2s3ClockSelection = RCC_I2S3CLKSOURCE_SYSCLK;
-
-#endif /* STM32F103xE || STM32F103xG */
-
-#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\
- || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\
- || defined(STM32F105xC) || defined(STM32F107xC)
- /* Get the USB clock configuration -----------------------------------------*/
- PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USB;
- PeriphClkInit->UsbClockSelection = __HAL_RCC_GET_USB_SOURCE();
-#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
-}
-
-/**
- * @brief Returns the peripheral clock frequency
- * @note Returns 0 if peripheral clock is unknown
- * @param PeriphClk Peripheral clock identifier
- * This parameter can be one of the following values:
- * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock
- * @arg @ref RCC_PERIPHCLK_ADC ADC peripheral clock
- @if STM32F103xE
- * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
- * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
- * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
- @endif
- @if STM32F103xG
- * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
- * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
- * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
- * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
- @endif
- @if STM32F105xC
- * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
- * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
- * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
- * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
- * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
- * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
- * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
- * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock
- @endif
- @if STM32F107xC
- * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
- * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
- * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
- * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
- * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
- * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock
- * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock
- * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock
- @endif
- @if STM32F102xx
- * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock
- @endif
- @if STM32F103xx
- * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock
- @endif
- * @retval Frequency in Hz (0: means that no available frequency for the peripheral)
- */
-uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk)
-{
-#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\
- || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\
- || defined(STM32F105xC) || defined(STM32F107xC)
-#if defined(STM32F105xC) || defined(STM32F107xC)
- const uint8_t aPLLMULFactorTable[12] = {0, 0, 4, 5, 6, 7, 8, 9, 0, 0, 0, 13};
- const uint8_t aPredivFactorTable[16] = { 1, 2, 3, 4, 5, 6, 7, 8, 9,10, 11, 12, 13, 14, 15, 16};
-#else
- const uint8_t aPLLMULFactorTable[16] = { 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 16};
- const uint8_t aPredivFactorTable[2] = { 1, 2};
-#endif
-#endif
- uint32_t temp_reg = 0, frequency = 0;
-#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\
- || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\
- || defined(STM32F105xC) || defined(STM32F107xC)
- uint32_t prediv1 = 0, pllclk = 0, pllmul = 0;
-#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
-#if defined(STM32F105xC) || defined(STM32F107xC)
- uint32_t pll2mul = 0, pll3mul = 0, prediv2 = 0;
-#endif /* STM32F105xC || STM32F107xC */
-
- /* Check the parameters */
- assert_param(IS_RCC_PERIPHCLOCK(PeriphClk));
-
- switch (PeriphClk)
- {
-#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\
- || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\
- || defined(STM32F105xC) || defined(STM32F107xC)
- case RCC_PERIPHCLK_USB:
- {
- /* Get RCC configuration ------------------------------------------------------*/
- temp_reg = RCC->CFGR;
-
- /* Check if PLL is enabled */
- if (HAL_IS_BIT_SET(RCC->CR,RCC_CR_PLLON))
- {
- pllmul = aPLLMULFactorTable[(uint32_t)(temp_reg & RCC_CFGR_PLLMULL) >> POSITION_VAL(RCC_CFGR_PLLMULL)];
- if ((temp_reg & RCC_CFGR_PLLSRC) != RCC_PLLSOURCE_HSI_DIV2)
- {
-#if defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F100xB)\
- || defined(STM32F100xE)
- prediv1 = aPredivFactorTable[(uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV1) >> POSITION_VAL(RCC_CFGR2_PREDIV1)];
-#else
- prediv1 = aPredivFactorTable[(uint32_t)(RCC->CFGR & RCC_CFGR_PLLXTPRE) >> POSITION_VAL(RCC_CFGR_PLLXTPRE)];
-#endif /* STM32F105xC || STM32F107xC || STM32F100xB || STM32F100xE */
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
- if(HAL_IS_BIT_SET(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC))
- {
- /* PLL2 selected as Prediv1 source */
- /* PLLCLK = PLL2CLK / PREDIV1 * PLLMUL with PLL2CLK = HSE/PREDIV2 * PLL2MUL */
- prediv2 = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> POSITION_VAL(RCC_CFGR2_PREDIV2)) + 1;
- pll2mul = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> POSITION_VAL(RCC_CFGR2_PLL2MUL)) + 2;
- pllclk = (uint32_t)((((HSE_VALUE / prediv2) * pll2mul) / prediv1) * pllmul);
- }
- else
- {
- /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV1 * PLLMUL */
- pllclk = (uint32_t)((HSE_VALUE / prediv1) * pllmul);
- }
-
- /* If PLLMUL was set to 13 means that it was to cover the case PLLMUL 6.5 (avoid using float) */
- /* In this case need to divide pllclk by 2 */
- if (pllmul == aPLLMULFactorTable[(uint32_t)(RCC_CFGR_PLLMULL6_5) >> POSITION_VAL(RCC_CFGR_PLLMULL)])
- {
- pllclk = pllclk / 2;
- }
-#else
- if ((temp_reg & RCC_CFGR_PLLSRC) != RCC_PLLSOURCE_HSI_DIV2)
- {
- /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV1 * PLLMUL */
- pllclk = (uint32_t)((HSE_VALUE / prediv1) * pllmul);
- }
-#endif /* STM32F105xC || STM32F107xC */
- }
- else
- {
- /* HSI used as PLL clock source : PLLCLK = HSI/2 * PLLMUL */
- pllclk = (uint32_t)((HSI_VALUE >> 1) * pllmul);
- }
-
- /* Calcul of the USB frequency*/
-#if defined(STM32F105xC) || defined(STM32F107xC)
- /* USBCLK = PLLVCO = (2 x PLLCLK) / USB prescaler */
- if (__HAL_RCC_GET_USB_SOURCE() == RCC_USBCLKSOURCE_PLL_DIV2)
- {
- /* Prescaler of 2 selected for USB */
- frequency = pllclk;
- }
- else
- {
- /* Prescaler of 3 selected for USB */
- frequency = (2 * pllclk) / 3;
- }
-#else
- /* USBCLK = PLLCLK / USB prescaler */
- if (__HAL_RCC_GET_USB_SOURCE() == RCC_USBCLKSOURCE_PLL)
- {
- /* No prescaler selected for USB */
- frequency = pllclk;
- }
- else
- {
- /* Prescaler of 1.5 selected for USB */
- frequency = (pllclk * 2) / 3;
- }
-#endif
- }
- break;
- }
-#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
-#if defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\
- || defined(STM32F107xC)
- case RCC_PERIPHCLK_I2S2:
- {
-#if defined(STM32F103xE) || defined(STM32F103xG)
- /* SYSCLK used as source clock for I2S2 */
- frequency = HAL_RCC_GetSysClockFreq();
-#else
- if (__HAL_RCC_GET_I2S2_SOURCE() == RCC_I2S2CLKSOURCE_SYSCLK)
- {
- /* SYSCLK used as source clock for I2S2 */
- frequency = HAL_RCC_GetSysClockFreq();
- }
- else
- {
- /* Check if PLLI2S is enabled */
- if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3ON))
- {
- /* PLLI2SVCO = 2 * PLLI2SCLK = 2 * (HSE/PREDIV2 * PLL3MUL) */
- prediv2 = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> POSITION_VAL(RCC_CFGR2_PREDIV2)) + 1;
- pll3mul = ((RCC->CFGR2 & RCC_CFGR2_PLL3MUL) >> POSITION_VAL(RCC_CFGR2_PLL3MUL)) + 2;
- frequency = (uint32_t)(2 * ((HSE_VALUE / prediv2) * pll3mul));
- }
- }
-#endif /* STM32F103xE || STM32F103xG */
- break;
- }
- case RCC_PERIPHCLK_I2S3:
- {
-#if defined(STM32F103xE) || defined(STM32F103xG)
- /* SYSCLK used as source clock for I2S3 */
- frequency = HAL_RCC_GetSysClockFreq();
-#else
- if (__HAL_RCC_GET_I2S3_SOURCE() == RCC_I2S3CLKSOURCE_SYSCLK)
- {
- /* SYSCLK used as source clock for I2S3 */
- frequency = HAL_RCC_GetSysClockFreq();
- }
- else
- {
- /* Check if PLLI2S is enabled */
- if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3ON))
- {
- /* PLLI2SVCO = 2 * PLLI2SCLK = 2 * (HSE/PREDIV2 * PLL3MUL) */
- prediv2 = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> POSITION_VAL(RCC_CFGR2_PREDIV2)) + 1;
- pll3mul = ((RCC->CFGR2 & RCC_CFGR2_PLL3MUL) >> POSITION_VAL(RCC_CFGR2_PLL3MUL)) + 2;
- frequency = (uint32_t)(2 * ((HSE_VALUE / prediv2) * pll3mul));
- }
- }
-#endif /* STM32F103xE || STM32F103xG */
- break;
- }
-#endif /* STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */
- case RCC_PERIPHCLK_RTC:
- {
- /* Get RCC BDCR configuration ------------------------------------------------------*/
- temp_reg = RCC->BDCR;
-
- /* Check if LSE is ready if RTC clock selection is LSE */
- if (((temp_reg & RCC_BDCR_RTCSEL) == RCC_RTCCLKSOURCE_LSE) && (HAL_IS_BIT_SET(temp_reg, RCC_BDCR_LSERDY)))
- {
- frequency = LSE_VALUE;
- }
- /* Check if LSI is ready if RTC clock selection is LSI */
- else if (((temp_reg & RCC_BDCR_RTCSEL) == RCC_RTCCLKSOURCE_LSI) && (HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY)))
- {
- frequency = LSI_VALUE;
- }
- else if (((temp_reg & RCC_BDCR_RTCSEL) == RCC_RTCCLKSOURCE_HSE_DIV128) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)))
- {
- frequency = HSE_VALUE / 128;
- }
- /* Clock not enabled for RTC*/
- else
- {
- frequency = 0;
- }
- break;
- }
- case RCC_PERIPHCLK_ADC:
- {
- frequency = HAL_RCC_GetPCLK2Freq() / (((__HAL_RCC_GET_ADC_SOURCE() >> POSITION_VAL(RCC_CFGR_ADCPRE_DIV4)) + 1) * 2);
- break;
- }
- default:
- {
- break;
- }
- }
- return(frequency);
-}
-
-/**
- * @}
- */
-
-#if defined(STM32F105xC) || defined(STM32F107xC)
-/** @defgroup RCCEx_Exported_Functions_Group2 PLLI2S Management function
- * @brief PLLI2S Management functions
- *
-@verbatim
- ===============================================================================
- ##### Extended PLLI2S Management functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to control the PLLI2S
- activation or deactivation
-@endverbatim
- * @{
- */
-
-/**
- * @brief Enable PLLI2S
- * @param PLLI2SInit pointer to an RCC_PLLI2SInitTypeDef structure that
- * contains the configuration information for the PLLI2S
- * @note The PLLI2S configuration not modified if used by I2S2 or I2S3 Interface.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RCCEx_EnablePLLI2S(RCC_PLLI2SInitTypeDef *PLLI2SInit)
-{
- uint32_t tickstart = 0;
-
- /* Check that PLL I2S has not been already enabled by I2S2 or I2S3*/
- if (HAL_IS_BIT_CLR(RCC->CFGR2, RCC_CFGR2_I2S2SRC) && HAL_IS_BIT_CLR(RCC->CFGR2, RCC_CFGR2_I2S3SRC))
- {
- /* Check the parameters */
- assert_param(IS_RCC_PLLI2S_MUL(PLLI2SInit->PLLI2SMUL));
- assert_param(IS_RCC_HSE_PREDIV2(PLLI2SInit->HSEPrediv2Value));
-
- /* Prediv2 can be written only when the PLL2 is disabled. */
- /* Return an error only if new value is different from the programmed value */
- if (HAL_IS_BIT_SET(RCC->CR,RCC_CR_PLL2ON) && \
- (__HAL_RCC_HSE_GET_PREDIV2() != PLLI2SInit->HSEPrediv2Value))
- {
- return HAL_ERROR;
- }
-
- /* Disable the main PLLI2S. */
- __HAL_RCC_PLLI2S_DISABLE();
-
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till PLLI2S is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Configure the HSE prediv2 factor --------------------------------*/
- __HAL_RCC_HSE_PREDIV2_CONFIG(PLLI2SInit->HSEPrediv2Value);
-
-
- /* Configure the main PLLI2S multiplication factors. */
- __HAL_RCC_PLLI2S_CONFIG(PLLI2SInit->PLLI2SMUL);
-
- /* Enable the main PLLI2S. */
- __HAL_RCC_PLLI2S_ENABLE();
-
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till PLLI2S is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- else
- {
- /* PLLI2S cannot be modified as already used by I2S2 or I2S3 */
- return HAL_ERROR;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Disable PLLI2S
- * @note PLLI2S is not disabled if used by I2S2 or I2S3 Interface.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RCCEx_DisablePLLI2S(void)
-{
- uint32_t tickstart = 0;
-
- /* Disable PLL I2S as not requested by I2S2 or I2S3*/
- if (HAL_IS_BIT_CLR(RCC->CFGR2, RCC_CFGR2_I2S2SRC) && HAL_IS_BIT_CLR(RCC->CFGR2, RCC_CFGR2_I2S3SRC))
- {
- /* Disable the main PLLI2S. */
- __HAL_RCC_PLLI2S_DISABLE();
-
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till PLLI2S is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- else
- {
- /* PLLI2S is currently used by I2S2 or I2S3. Cannot be disabled.*/
- return HAL_ERROR;
- }
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup RCCEx_Exported_Functions_Group3 PLL2 Management function
- * @brief PLL2 Management functions
- *
-@verbatim
- ===============================================================================
- ##### Extended PLL2 Management functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to control the PLL2
- activation or deactivation
-@endverbatim
- * @{
- */
-
-/**
- * @brief Enable PLL2
- * @param PLL2Init pointer to an RCC_PLL2InitTypeDef structure that
- * contains the configuration information for the PLL2
- * @note The PLL2 configuration not modified if used indirectly as system clock.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RCCEx_EnablePLL2(RCC_PLL2InitTypeDef *PLL2Init)
-{
- uint32_t tickstart = 0;
-
- /* This bit can not be cleared if the PLL2 clock is used indirectly as system
- clock (i.e. it is used as PLL clock entry that is used as system clock). */
- if((__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE) && \
- (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && \
- ((READ_BIT(RCC->CFGR2,RCC_CFGR2_PREDIV1SRC)) == RCC_CFGR2_PREDIV1SRC_PLL2))
- {
- return HAL_ERROR;
- }
- else
- {
- /* Check the parameters */
- assert_param(IS_RCC_PLL2_MUL(PLL2Init->PLL2MUL));
- assert_param(IS_RCC_HSE_PREDIV2(PLL2Init->HSEPrediv2Value));
-
- /* Prediv2 can be written only when the PLLI2S is disabled. */
- /* Return an error only if new value is different from the programmed value */
- if (HAL_IS_BIT_SET(RCC->CR,RCC_CR_PLL3ON) && \
- (__HAL_RCC_HSE_GET_PREDIV2() != PLL2Init->HSEPrediv2Value))
- {
- return HAL_ERROR;
- }
-
- /* Disable the main PLL2. */
- __HAL_RCC_PLL2_DISABLE();
-
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till PLL2 is disabled */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLL2_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Configure the HSE prediv2 factor --------------------------------*/
- __HAL_RCC_HSE_PREDIV2_CONFIG(PLL2Init->HSEPrediv2Value);
-
- /* Configure the main PLL2 multiplication factors. */
- __HAL_RCC_PLL2_CONFIG(PLL2Init->PLL2MUL);
-
- /* Enable the main PLL2. */
- __HAL_RCC_PLL2_ENABLE();
-
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till PLL2 is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLL2_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Disable PLL2
- * @note PLL2 is not disabled if used indirectly as system clock.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RCCEx_DisablePLL2(void)
-{
- uint32_t tickstart = 0;
-
- /* This bit can not be cleared if the PLL2 clock is used indirectly as system
- clock (i.e. it is used as PLL clock entry that is used as system clock). */
- if((__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE) && \
- (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && \
- ((READ_BIT(RCC->CFGR2,RCC_CFGR2_PREDIV1SRC)) == RCC_CFGR2_PREDIV1SRC_PLL2))
- {
- return HAL_ERROR;
- }
- else
- {
- /* Disable the main PLL2. */
- __HAL_RCC_PLL2_DISABLE();
-
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till PLL2 is disabled */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLL2_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-#endif /* STM32F105xC || STM32F107xC */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* HAL_RCC_MODULE_ENABLED */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c
deleted file mode 100644
index f904f82..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c
+++ /dev/null
@@ -1,5379 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_tim.c
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief TIM HAL module driver
- * This file provides firmware functions to manage the following
- * functionalities of the Timer (TIM) peripheral:
- * + Time Base Initialization
- * + Time Base Start
- * + Time Base Start Interruption
- * + Time Base Start DMA
- * + Time Output Compare/PWM Initialization
- * + Time Output Compare/PWM Channel Configuration
- * + Time Output Compare/PWM Start
- * + Time Output Compare/PWM Start Interruption
- * + Time Output Compare/PWM Start DMA
- * + Time Input Capture Initialization
- * + Time Input Capture Channel Configuration
- * + Time Input Capture Start
- * + Time Input Capture Start Interruption
- * + Time Input Capture Start DMA
- * + Time One Pulse Initialization
- * + Time One Pulse Channel Configuration
- * + Time One Pulse Start
- * + Time Encoder Interface Initialization
- * + Time Encoder Interface Start
- * + Time Encoder Interface Start Interruption
- * + Time Encoder Interface Start DMA
- * + Commutation Event configuration with Interruption and DMA
- * + Time OCRef clear configuration
- * + Time External Clock configuration
- @verbatim
- ==============================================================================
- ##### TIMER Generic features #####
- ==============================================================================
- [..] The Timer features include:
- (#) 16-bit up, down, up/down auto-reload counter.
- (#) 16-bit programmable prescaler allowing dividing (also on the fly) the
- counter clock frequency either by any factor between 1 and 65536.
- (#) Up to 4 independent channels for:
- (++) Input Capture
- (++) Output Compare
- (++) PWM generation (Edge and Center-aligned Mode)
- (++) One-pulse mode output
-
- ##### How to use this driver #####
- ==============================================================================
- [..]
- (#) Initialize the TIM low level resources by implementing the following functions
- depending from feature used :
- (++) Time Base : HAL_TIM_Base_MspInit()
- (++) Input Capture : HAL_TIM_IC_MspInit()
- (++) Output Compare : HAL_TIM_OC_MspInit()
- (++) PWM generation : HAL_TIM_PWM_MspInit()
- (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit()
- (++) Encoder mode output : HAL_TIM_Encoder_MspInit()
-
- (#) Initialize the TIM low level resources :
- (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE();
- (##) TIM pins configuration
- (+++) Enable the clock for the TIM GPIOs using the following function:
- __HAL_RCC_GPIOx_CLK_ENABLE();
- (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
-
- (#) The external Clock can be configured, if needed (the default clock is the
- internal clock from the APBx), using the following function:
- HAL_TIM_ConfigClockSource, the clock configuration should be done before
- any start function.
-
- (#) Configure the TIM in the desired functioning mode using one of the
- Initialization function of this driver:
- (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base
- (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an
- Output Compare signal.
- (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a
- PWM signal.
- (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an
- external signal.
- (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer
- in One Pulse Mode.
- (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface.
-
- (#) Activate the TIM peripheral using one of the start functions depending from the feature used:
- (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT()
- (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT()
- (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT()
- (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT()
- (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT()
- (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT().
-
- (#) The DMA Burst is managed with the two following functions:
- HAL_TIM_DMABurst_WriteStart()
- HAL_TIM_DMABurst_ReadStart()
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @defgroup TIM TIM
- * @brief TIM HAL module driver
- * @{
- */
-
-#ifdef HAL_TIM_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/** @defgroup TIM_Private_Functions TIM Private Functions
- * @{
- */
-static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
-static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
-static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
-static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
-static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
- uint32_t TIM_ICFilter);
-static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
-static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
- uint32_t TIM_ICFilter);
-static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
- uint32_t TIM_ICFilter);
-static void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler,
- uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter);
-static void TIM_ITRx_SetConfig(TIM_TypeDef* TIMx, uint16_t InputTriggerSource);
-static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma);
-static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma);
-static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
- TIM_SlaveConfigTypeDef * sSlaveConfig);
-
-/**
- * @}
- */
-
-/* Exported functions ---------------------------------------------------------*/
-
-/** @defgroup TIM_Exported_Functions TIM Exported Functions
- * @{
- */
-
-/** @defgroup TIM_Exported_Functions_Group1 Time Base functions
- * @brief Time Base functions
- *
-@verbatim
- ==============================================================================
- ##### Time Base functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Initialize and configure the TIM base.
- (+) De-initialize the TIM base.
- (+) Start the Time Base.
- (+) Stop the Time Base.
- (+) Start the Time Base and enable interrupt.
- (+) Stop the Time Base and disable interrupt.
- (+) Start the Time Base and enable DMA transfer.
- (+) Stop the Time Base and disable DMA transfer.
-
-@endverbatim
- * @{
- */
-/**
- * @brief Initializes the TIM Time base Unit according to the specified
- * parameters in the TIM_HandleTypeDef and create the associated handle.
- * @param htim : TIM Base handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim)
-{
- /* Check the TIM handle allocation */
- if(htim == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
- assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
- assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
-
- if(htim->State == HAL_TIM_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- htim->Lock = HAL_UNLOCKED;
-
- /* Init the low level hardware : GPIO, CLOCK, NVIC */
- HAL_TIM_Base_MspInit(htim);
- }
-
- /* Set the TIM state */
- htim->State= HAL_TIM_STATE_BUSY;
-
- /* Set the Time Base configuration */
- TIM_Base_SetConfig(htim->Instance, &htim->Init);
-
- /* Initialize the TIM state*/
- htim->State= HAL_TIM_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the TIM Base peripheral
- * @param htim : TIM Base handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- /* Disable the TIM Peripheral Clock */
- __HAL_TIM_DISABLE(htim);
-
- /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
- HAL_TIM_Base_MspDeInit(htim);
-
- /* Change TIM state */
- htim->State = HAL_TIM_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the TIM Base MSP.
- * @param htim : TIM handle
- * @retval None
- */
-__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(htim);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_Base_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes TIM Base MSP.
- * @param htim : TIM handle
- * @retval None
- */
-__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(htim);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_Base_MspDeInit could be implemented in the user file
- */
-}
-
-
-/**
- * @brief Starts the TIM Base generation.
- * @param htim : TIM handle
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
-
- /* Set the TIM state */
- htim->State= HAL_TIM_STATE_BUSY;
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Change the TIM state*/
- htim->State= HAL_TIM_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Base generation.
- * @param htim : TIM handle
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
-
- /* Set the TIM state */
- htim->State= HAL_TIM_STATE_BUSY;
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Change the TIM state*/
- htim->State= HAL_TIM_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM Base generation in interrupt mode.
- * @param htim : TIM handle
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
-
- /* Enable the TIM Update interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Base generation in interrupt mode.
- * @param htim : TIM handle
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
- /* Disable the TIM Update interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM Base generation in DMA mode.
- * @param htim : TIM handle
- * @param pData : The source Buffer address.
- * @param Length : The length of data to be transferred from memory to peripheral.
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
-{
- /* Check the parameters */
- assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
-
- if((htim->State == HAL_TIM_STATE_BUSY))
- {
- return HAL_BUSY;
- }
- else if((htim->State == HAL_TIM_STATE_READY))
- {
- if((pData == 0 ) && (Length > 0))
- {
- return HAL_ERROR;
- }
- else
- {
- htim->State = HAL_TIM_STATE_BUSY;
- }
- }
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length);
-
- /* Enable the TIM Update DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Base generation in DMA mode.
- * @param htim : TIM handle
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
-
- /* Disable the TIM Update DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Change the htim state */
- htim->State = HAL_TIM_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup TIM_Exported_Functions_Group2 Time Output Compare functions
- * @brief Time Output Compare functions
- *
-@verbatim
- ==============================================================================
- ##### Time Output Compare functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Initialize and configure the TIM Output Compare.
- (+) De-initialize the TIM Output Compare.
- (+) Start the Time Output Compare.
- (+) Stop the Time Output Compare.
- (+) Start the Time Output Compare and enable interrupt.
- (+) Stop the Time Output Compare and disable interrupt.
- (+) Start the Time Output Compare and enable DMA transfer.
- (+) Stop the Time Output Compare and disable DMA transfer.
-
-@endverbatim
- * @{
- */
-/**
- * @brief Initializes the TIM Output Compare according to the specified
- * parameters in the TIM_HandleTypeDef and create the associated handle.
- * @param htim : TIM Output Compare handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef* htim)
-{
- /* Check the TIM handle allocation */
- if(htim == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
- assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
- assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
-
- if(htim->State == HAL_TIM_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- htim->Lock = HAL_UNLOCKED;
-
- /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
- HAL_TIM_OC_MspInit(htim);
- }
-
- /* Set the TIM state */
- htim->State= HAL_TIM_STATE_BUSY;
-
- /* Init the base time for the Output Compare */
- TIM_Base_SetConfig(htim->Instance, &htim->Init);
-
- /* Initialize the TIM state*/
- htim->State= HAL_TIM_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the TIM peripheral
- * @param htim : TIM Output Compare handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- /* Disable the TIM Peripheral Clock */
- __HAL_TIM_DISABLE(htim);
-
- /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
- HAL_TIM_OC_MspDeInit(htim);
-
- /* Change TIM state */
- htim->State = HAL_TIM_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the TIM Output Compare MSP.
- * @param htim : TIM handle
- * @retval None
- */
-__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(htim);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_OC_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes TIM Output Compare MSP.
- * @param htim : TIM handle
- * @retval None
- */
-__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(htim);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_OC_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @brief Starts the TIM Output Compare signal generation.
- * @param htim : TIM Output Compare handle
- * @param Channel : TIM Channel to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- /* Enable the Output compare channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
-
- if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
- {
- /* Enable the main output */
- __HAL_TIM_MOE_ENABLE(htim);
- }
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Output Compare signal generation.
- * @param htim : TIM handle
- * @param Channel : TIM Channel to be disabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- /* Disable the Output compare channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
-
- if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
- {
- /* Disable the Main Ouput */
- __HAL_TIM_MOE_DISABLE(htim);
- }
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM Output Compare signal generation in interrupt mode.
- * @param htim : TIM OC handle
- * @param Channel : TIM Channel to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Enable the TIM Capture/Compare 1 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Enable the TIM Capture/Compare 2 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Enable the TIM Capture/Compare 3 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Enable the TIM Capture/Compare 4 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Enable the Output compare channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
-
- if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
- {
- /* Enable the main output */
- __HAL_TIM_MOE_ENABLE(htim);
- }
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Output Compare signal generation in interrupt mode.
- * @param htim : TIM Output Compare handle
- * @param Channel : TIM Channel to be disabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Disable the TIM Capture/Compare 1 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Disable the TIM Capture/Compare 2 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Disable the TIM Capture/Compare 3 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Disable the TIM Capture/Compare 4 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Disable the Output compare channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
-
- if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
- {
- /* Disable the Main Ouput */
- __HAL_TIM_MOE_DISABLE(htim);
- }
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM Output Compare signal generation in DMA mode.
- * @param htim : TIM Output Compare handle
- * @param Channel : TIM Channel to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @param pData : The source Buffer address.
- * @param Length : The length of data to be transferred from memory to TIM peripheral
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- if((htim->State == HAL_TIM_STATE_BUSY))
- {
- return HAL_BUSY;
- }
- else if((htim->State == HAL_TIM_STATE_READY))
- {
- if(((uint32_t)pData == 0 ) && (Length > 0))
- {
- return HAL_ERROR;
- }
- else
- {
- htim->State = HAL_TIM_STATE_BUSY;
- }
- }
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
-
- /* Enable the TIM Capture/Compare 1 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
-
- /* Enable the TIM Capture/Compare 2 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
-
- /* Enable the TIM Capture/Compare 3 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
-
- /* Enable the TIM Capture/Compare 4 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Enable the Output compare channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
-
- if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
- {
- /* Enable the main output */
- __HAL_TIM_MOE_ENABLE(htim);
- }
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Output Compare signal generation in DMA mode.
- * @param htim : TIM Output Compare handle
- * @param Channel : TIM Channel to be disabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Disable the TIM Capture/Compare 1 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Disable the TIM Capture/Compare 2 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Disable the TIM Capture/Compare 3 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Disable the TIM Capture/Compare 4 interrupt */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Disable the Output compare channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
-
- if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
- {
- /* Disable the Main Ouput */
- __HAL_TIM_MOE_DISABLE(htim);
- }
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Change the htim state */
- htim->State = HAL_TIM_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup TIM_Exported_Functions_Group3 Time PWM functions
- * @brief Time PWM functions
- *
-@verbatim
- ==============================================================================
- ##### Time PWM functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Initialize and configure the TIM PWM.
- (+) De-initialize the TIM PWM.
- (+) Start the Time PWM.
- (+) Stop the Time PWM.
- (+) Start the Time PWM and enable interrupt.
- (+) Stop the Time PWM and disable interrupt.
- (+) Start the Time PWM and enable DMA transfer.
- (+) Stop the Time PWM and disable DMA transfer.
-
-@endverbatim
- * @{
- */
-/**
- * @brief Initializes the TIM PWM Time Base according to the specified
- * parameters in the TIM_HandleTypeDef and create the associated handle.
- * @param htim : TIM handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim)
-{
- /* Check the TIM handle allocation */
- if(htim == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
- assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
- assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
-
- if(htim->State == HAL_TIM_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- htim->Lock = HAL_UNLOCKED;
-
- /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
- HAL_TIM_PWM_MspInit(htim);
- }
-
- /* Set the TIM state */
- htim->State= HAL_TIM_STATE_BUSY;
-
- /* Init the base time for the PWM */
- TIM_Base_SetConfig(htim->Instance, &htim->Init);
-
- /* Initialize the TIM state*/
- htim->State= HAL_TIM_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the TIM peripheral
- * @param htim : TIM handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- /* Disable the TIM Peripheral Clock */
- __HAL_TIM_DISABLE(htim);
-
- /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
- HAL_TIM_PWM_MspDeInit(htim);
-
- /* Change TIM state */
- htim->State = HAL_TIM_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the TIM PWM MSP.
- * @param htim : TIM handle
- * @retval None
- */
-__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(htim);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_PWM_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes TIM PWM MSP.
- * @param htim : TIM handle
- * @retval None
- */
-__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(htim);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_PWM_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @brief Starts the PWM signal generation.
- * @param htim : TIM handle
- * @param Channel : TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- /* Enable the Capture compare channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
-
- if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
- {
- /* Enable the main output */
- __HAL_TIM_MOE_ENABLE(htim);
- }
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the PWM signal generation.
- * @param htim : TIM handle
- * @param Channel : TIM Channels to be disabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- /* Disable the Capture compare channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
-
- if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
- {
- /* Disable the Main Ouput */
- __HAL_TIM_MOE_DISABLE(htim);
- }
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Change the htim state */
- htim->State = HAL_TIM_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the PWM signal generation in interrupt mode.
- * @param htim : TIM handle
- * @param Channel : TIM Channel to be disabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Enable the TIM Capture/Compare 1 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Enable the TIM Capture/Compare 2 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Enable the TIM Capture/Compare 3 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Enable the TIM Capture/Compare 4 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Enable the Capture compare channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
-
- if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
- {
- /* Enable the main output */
- __HAL_TIM_MOE_ENABLE(htim);
- }
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the PWM signal generation in interrupt mode.
- * @param htim : TIM handle
- * @param Channel : TIM Channels to be disabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Disable the TIM Capture/Compare 1 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Disable the TIM Capture/Compare 2 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Disable the TIM Capture/Compare 3 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Disable the TIM Capture/Compare 4 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Disable the Capture compare channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
-
- if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
- {
- /* Disable the Main Ouput */
- __HAL_TIM_MOE_DISABLE(htim);
- }
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM PWM signal generation in DMA mode.
- * @param htim : TIM handle
- * @param Channel : TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @param pData : The source Buffer address.
- * @param Length : The length of data to be transferred from memory to TIM peripheral
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- if((htim->State == HAL_TIM_STATE_BUSY))
- {
- return HAL_BUSY;
- }
- else if((htim->State == HAL_TIM_STATE_READY))
- {
- if(((uint32_t)pData == 0 ) && (Length > 0))
- {
- return HAL_ERROR;
- }
- else
- {
- htim->State = HAL_TIM_STATE_BUSY;
- }
- }
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
-
- /* Enable the TIM Capture/Compare 1 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
-
- /* Enable the TIM Capture/Compare 2 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
-
- /* Enable the TIM Output Capture/Compare 3 request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
-
- /* Enable the TIM Capture/Compare 4 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Enable the Capture compare channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
-
- if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
- {
- /* Enable the main output */
- __HAL_TIM_MOE_ENABLE(htim);
- }
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM PWM signal generation in DMA mode.
- * @param htim : TIM handle
- * @param Channel : TIM Channels to be disabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Disable the TIM Capture/Compare 1 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Disable the TIM Capture/Compare 2 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Disable the TIM Capture/Compare 3 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Disable the TIM Capture/Compare 4 interrupt */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Disable the Capture compare channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
-
- if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
- {
- /* Disable the Main Ouput */
- __HAL_TIM_MOE_DISABLE(htim);
- }
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Change the htim state */
- htim->State = HAL_TIM_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup TIM_Exported_Functions_Group4 Time Input Capture functions
- * @brief Time Input Capture functions
- *
-@verbatim
- ==============================================================================
- ##### Time Input Capture functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Initialize and configure the TIM Input Capture.
- (+) De-initialize the TIM Input Capture.
- (+) Start the Time Input Capture.
- (+) Stop the Time Input Capture.
- (+) Start the Time Input Capture and enable interrupt.
- (+) Stop the Time Input Capture and disable interrupt.
- (+) Start the Time Input Capture and enable DMA transfer.
- (+) Stop the Time Input Capture and disable DMA transfer.
-
-@endverbatim
- * @{
- */
-/**
- * @brief Initializes the TIM Input Capture Time base according to the specified
- * parameters in the TIM_HandleTypeDef and create the associated handle.
- * @param htim : TIM Input Capture handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim)
-{
- /* Check the TIM handle allocation */
- if(htim == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
- assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
- assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
-
- if(htim->State == HAL_TIM_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- htim->Lock = HAL_UNLOCKED;
-
- /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
- HAL_TIM_IC_MspInit(htim);
- }
-
- /* Set the TIM state */
- htim->State= HAL_TIM_STATE_BUSY;
-
- /* Init the base time for the input capture */
- TIM_Base_SetConfig(htim->Instance, &htim->Init);
-
- /* Initialize the TIM state*/
- htim->State= HAL_TIM_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the TIM peripheral
- * @param htim : TIM Input Capture handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- /* Disable the TIM Peripheral Clock */
- __HAL_TIM_DISABLE(htim);
-
- /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
- HAL_TIM_IC_MspDeInit(htim);
-
- /* Change TIM state */
- htim->State = HAL_TIM_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the TIM Input Capture MSP.
- * @param htim : TIM handle
- * @retval None
- */
-__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(htim);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_IC_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes TIM Input Capture MSP.
- * @param htim : TIM handle
- * @retval None
- */
-__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(htim);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_IC_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @brief Starts the TIM Input Capture measurement.
- * @param htim : TIM Input Capture handle
- * @param Channel : TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_IC_Start (TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- /* Enable the Input Capture channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Input Capture measurement.
- * @param htim : TIM handle
- * @param Channel : TIM Channels to be disabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- /* Disable the Input Capture channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM Input Capture measurement in interrupt mode.
- * @param htim : TIM Input Capture handle
- * @param Channel : TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_IC_Start_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Enable the TIM Capture/Compare 1 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Enable the TIM Capture/Compare 2 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Enable the TIM Capture/Compare 3 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Enable the TIM Capture/Compare 4 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
- }
- break;
-
- default:
- break;
- }
- /* Enable the Input Capture channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Input Capture measurement in interrupt mode.
- * @param htim : TIM handle
- * @param Channel : TIM Channels to be disabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Disable the TIM Capture/Compare 1 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Disable the TIM Capture/Compare 2 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Disable the TIM Capture/Compare 3 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Disable the TIM Capture/Compare 4 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Disable the Input Capture channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM Input Capture measurement in DMA mode.
- * @param htim : TIM Input Capture handle
- * @param Channel : TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @param pData : The destination Buffer address.
- * @param Length : The length of data to be transferred from TIM peripheral to memory.
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
- assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
-
- if((htim->State == HAL_TIM_STATE_BUSY))
- {
- return HAL_BUSY;
- }
- else if((htim->State == HAL_TIM_STATE_READY))
- {
- if((pData == 0 ) && (Length > 0))
- {
- return HAL_ERROR;
- }
- else
- {
- htim->State = HAL_TIM_STATE_BUSY;
- }
- }
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length);
-
- /* Enable the TIM Capture/Compare 1 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length);
-
- /* Enable the TIM Capture/Compare 2 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length);
-
- /* Enable the TIM Capture/Compare 3 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length);
-
- /* Enable the TIM Capture/Compare 4 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Enable the Input Capture channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Input Capture measurement in DMA mode.
- * @param htim : TIM Input Capture handle
- * @param Channel : TIM Channels to be disabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
- assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Disable the TIM Capture/Compare 1 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Disable the TIM Capture/Compare 2 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Disable the TIM Capture/Compare 3 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Disable the TIM Capture/Compare 4 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Disable the Input Capture channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Change the htim state */
- htim->State = HAL_TIM_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-/**
- * @}
- */
-
-/** @defgroup TIM_Exported_Functions_Group5 Time One Pulse functions
- * @brief Time One Pulse functions
- *
-@verbatim
- ==============================================================================
- ##### Time One Pulse functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Initialize and configure the TIM One Pulse.
- (+) De-initialize the TIM One Pulse.
- (+) Start the Time One Pulse.
- (+) Stop the Time One Pulse.
- (+) Start the Time One Pulse and enable interrupt.
- (+) Stop the Time One Pulse and disable interrupt.
- (+) Start the Time One Pulse and enable DMA transfer.
- (+) Stop the Time One Pulse and disable DMA transfer.
-
-@endverbatim
- * @{
- */
-/**
- * @brief Initializes the TIM One Pulse Time Base according to the specified
- * parameters in the TIM_HandleTypeDef and create the associated handle.
- * @param htim : TIM OnePulse handle
- * @param OnePulseMode : Select the One pulse mode.
- * This parameter can be one of the following values:
- * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated.
- * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses wil be generated.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode)
-{
- /* Check the TIM handle allocation */
- if(htim == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
- assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
- assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
- assert_param(IS_TIM_OPM_MODE(OnePulseMode));
-
- if(htim->State == HAL_TIM_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- htim->Lock = HAL_UNLOCKED;
-
- /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
- HAL_TIM_OnePulse_MspInit(htim);
- }
-
- /* Set the TIM state */
- htim->State= HAL_TIM_STATE_BUSY;
-
- /* Configure the Time base in the One Pulse Mode */
- TIM_Base_SetConfig(htim->Instance, &htim->Init);
-
- /* Reset the OPM Bit */
- htim->Instance->CR1 &= ~TIM_CR1_OPM;
-
- /* Configure the OPM Mode */
- htim->Instance->CR1 |= OnePulseMode;
-
- /* Initialize the TIM state*/
- htim->State= HAL_TIM_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the TIM One Pulse
- * @param htim : TIM One Pulse handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- /* Disable the TIM Peripheral Clock */
- __HAL_TIM_DISABLE(htim);
-
- /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
- HAL_TIM_OnePulse_MspDeInit(htim);
-
- /* Change TIM state */
- htim->State = HAL_TIM_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the TIM One Pulse MSP.
- * @param htim : TIM handle
- * @retval None
- */
-__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(htim);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_OnePulse_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes TIM One Pulse MSP.
- * @param htim : TIM handle
- * @retval None
- */
-__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(htim);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @brief Starts the TIM One Pulse signal generation.
- * @param htim : TIM One Pulse handle
- * @param OutputChannel : TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
-{
- /* Enable the Capture compare and the Input Capture channels
- (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
- if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
- if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
- in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
-
- No need to enable the counter, it's enabled automatically by hardware
- (the counter starts in response to a stimulus and generate a pulse */
-
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
-
- if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
- {
- /* Enable the main output */
- __HAL_TIM_MOE_ENABLE(htim);
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM One Pulse signal generation.
- * @param htim : TIM One Pulse handle
- * @param OutputChannel : TIM Channels to be disable
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
-{
- /* Disable the Capture compare and the Input Capture channels
- (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
- if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
- if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
- in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
-
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
-
- if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
- {
- /* Disable the Main Ouput */
- __HAL_TIM_MOE_DISABLE(htim);
- }
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM One Pulse signal generation in interrupt mode.
- * @param htim : TIM One Pulse handle
- * @param OutputChannel : TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
-{
- /* Enable the Capture compare and the Input Capture channels
- (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
- if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
- if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
- in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
-
- No need to enable the counter, it's enabled automatically by hardware
- (the counter starts in response to a stimulus and generate a pulse */
-
- /* Enable the TIM Capture/Compare 1 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
-
- /* Enable the TIM Capture/Compare 2 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
-
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
-
- if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
- {
- /* Enable the main output */
- __HAL_TIM_MOE_ENABLE(htim);
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM One Pulse signal generation in interrupt mode.
- * @param htim : TIM One Pulse handle
- * @param OutputChannel : TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
-{
- /* Disable the TIM Capture/Compare 1 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
-
- /* Disable the TIM Capture/Compare 2 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
-
- /* Disable the Capture compare and the Input Capture channels
- (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
- if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
- if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
- in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
-
- if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET)
- {
- /* Disable the Main Ouput */
- __HAL_TIM_MOE_DISABLE(htim);
- }
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup TIM_Exported_Functions_Group6 Time Encoder functions
- * @brief Time Encoder functions
- *
-@verbatim
- ==============================================================================
- ##### Time Encoder functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Initialize and configure the TIM Encoder.
- (+) De-initialize the TIM Encoder.
- (+) Start the Time Encoder.
- (+) Stop the Time Encoder.
- (+) Start the Time Encoder and enable interrupt.
- (+) Stop the Time Encoder and disable interrupt.
- (+) Start the Time Encoder and enable DMA transfer.
- (+) Stop the Time Encoder and disable DMA transfer.
-
-@endverbatim
- * @{
- */
-/**
- * @brief Initializes the TIM Encoder Interface and create the associated handle.
- * @param htim : TIM Encoder Interface handle
- * @param sConfig : TIM Encoder Interface configuration structure
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig)
-{
- uint32_t tmpsmcr = 0;
- uint32_t tmpccmr1 = 0;
- uint32_t tmpccer = 0;
-
- /* Check the TIM handle allocation */
- if(htim == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
- assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode));
- assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection));
- assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection));
- assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
- assert_param(IS_TIM_IC_POLARITY(sConfig->IC2Polarity));
- assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
- assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler));
- assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
- assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter));
-
- if(htim->State == HAL_TIM_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- htim->Lock = HAL_UNLOCKED;
-
- /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
- HAL_TIM_Encoder_MspInit(htim);
- }
-
- /* Set the TIM state */
- htim->State= HAL_TIM_STATE_BUSY;
-
- /* Reset the SMS bits */
- htim->Instance->SMCR &= ~TIM_SMCR_SMS;
-
- /* Configure the Time base in the Encoder Mode */
- TIM_Base_SetConfig(htim->Instance, &htim->Init);
-
- /* Get the TIMx SMCR register value */
- tmpsmcr = htim->Instance->SMCR;
-
- /* Get the TIMx CCMR1 register value */
- tmpccmr1 = htim->Instance->CCMR1;
-
- /* Get the TIMx CCER register value */
- tmpccer = htim->Instance->CCER;
-
- /* Set the encoder Mode */
- tmpsmcr |= sConfig->EncoderMode;
-
- /* Select the Capture Compare 1 and the Capture Compare 2 as input */
- tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S);
- tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8));
-
- /* Set the the Capture Compare 1 and the Capture Compare 2 prescalers and filters */
- tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC);
- tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F);
- tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8);
- tmpccmr1 |= (sConfig->IC1Filter << 4) | (sConfig->IC2Filter << 12);
-
- /* Set the TI1 and the TI2 Polarities */
- tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P);
- tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP);
- tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4);
-
- /* Write to TIMx SMCR */
- htim->Instance->SMCR = tmpsmcr;
-
- /* Write to TIMx CCMR1 */
- htim->Instance->CCMR1 = tmpccmr1;
-
- /* Write to TIMx CCER */
- htim->Instance->CCER = tmpccer;
-
- /* Initialize the TIM state*/
- htim->State= HAL_TIM_STATE_READY;
-
- return HAL_OK;
-}
-
-
-/**
- * @brief DeInitializes the TIM Encoder interface
- * @param htim : TIM Encoder handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- /* Disable the TIM Peripheral Clock */
- __HAL_TIM_DISABLE(htim);
-
- /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
- HAL_TIM_Encoder_MspDeInit(htim);
-
- /* Change TIM state */
- htim->State = HAL_TIM_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the TIM Encoder Interface MSP.
- * @param htim : TIM handle
- * @retval None
- */
-__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(htim);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_Encoder_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes TIM Encoder Interface MSP.
- * @param htim : TIM handle
- * @retval None
- */
-__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(htim);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_Encoder_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @brief Starts the TIM Encoder Interface.
- * @param htim : TIM Encoder Interface handle
- * @param Channel : TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
-
- /* Enable the encoder interface channels */
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
- break;
- }
- case TIM_CHANNEL_2:
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
- break;
- }
- default :
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
- break;
- }
- }
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Encoder Interface.
- * @param htim : TIM Encoder Interface handle
- * @param Channel : TIM Channels to be disabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
-
- /* Disable the Input Capture channels 1 and 2
- (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
- break;
- }
- case TIM_CHANNEL_2:
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
- break;
- }
- default :
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
- break;
- }
- }
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM Encoder Interface in interrupt mode.
- * @param htim : TIM Encoder Interface handle
- * @param Channel : TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
-
- /* Enable the encoder interface channels */
- /* Enable the capture compare Interrupts 1 and/or 2 */
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
- break;
- }
- case TIM_CHANNEL_2:
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
- break;
- }
- default :
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
- break;
- }
- }
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Encoder Interface in interrupt mode.
- * @param htim : TIM Encoder Interface handle
- * @param Channel : TIM Channels to be disabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
-
- /* Disable the Input Capture channels 1 and 2
- (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
- if(Channel == TIM_CHANNEL_1)
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
-
- /* Disable the capture compare Interrupts 1 */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
- }
- else if(Channel == TIM_CHANNEL_2)
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
-
- /* Disable the capture compare Interrupts 2 */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
- }
- else
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
-
- /* Disable the capture compare Interrupts 1 and 2 */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
- }
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Change the htim state */
- htim->State = HAL_TIM_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM Encoder Interface in DMA mode.
- * @param htim : TIM Encoder Interface handle
- * @param Channel : TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
- * @param pData1 : The destination Buffer address for IC1.
- * @param pData2 : The destination Buffer address for IC2.
- * @param Length : The length of data to be transferred from TIM peripheral to memory.
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length)
-{
- /* Check the parameters */
- assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
-
- if((htim->State == HAL_TIM_STATE_BUSY))
- {
- return HAL_BUSY;
- }
- else if((htim->State == HAL_TIM_STATE_READY))
- {
- if((((pData1 == 0) || (pData2 == 0) )) && (Length > 0))
- {
- return HAL_ERROR;
- }
- else
- {
- htim->State = HAL_TIM_STATE_BUSY;
- }
- }
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t )pData1, Length);
-
- /* Enable the TIM Input Capture DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Enable the Capture compare channel */
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError;
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length);
-
- /* Enable the TIM Input Capture DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Enable the Capture compare channel */
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
- }
- break;
-
- case TIM_CHANNEL_ALL:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length);
-
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Enable the Capture compare channel */
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
-
- /* Enable the TIM Input Capture DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
- /* Enable the TIM Input Capture DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
- }
- break;
-
- default:
- break;
- }
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Encoder Interface in DMA mode.
- * @param htim : TIM Encoder Interface handle
- * @param Channel : TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
-
- /* Disable the Input Capture channels 1 and 2
- (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
- if(Channel == TIM_CHANNEL_1)
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
-
- /* Disable the capture compare DMA Request 1 */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
- }
- else if(Channel == TIM_CHANNEL_2)
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
-
- /* Disable the capture compare DMA Request 2 */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
- }
- else
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
-
- /* Disable the capture compare DMA Request 1 and 2 */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
- }
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Change the htim state */
- htim->State = HAL_TIM_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management
- * @brief IRQ handler management
- *
-@verbatim
- ==============================================================================
- ##### IRQ handler management #####
- ==============================================================================
- [..]
- This section provides Timer IRQ handler function.
-
-@endverbatim
- * @{
- */
-/**
- * @brief This function handles TIM interrupts requests.
- * @param htim : TIM handle
- * @retval None
- */
-void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim)
-{
- /* Capture compare 1 event */
- if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET)
- {
- if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) !=RESET)
- {
- {
- __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1);
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
-
- /* Input capture event */
- if((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00)
- {
- HAL_TIM_IC_CaptureCallback(htim);
- }
- /* Output compare event */
- else
- {
- HAL_TIM_OC_DelayElapsedCallback(htim);
- HAL_TIM_PWM_PulseFinishedCallback(htim);
- }
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
- }
- }
- }
- /* Capture compare 2 event */
- if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET)
- {
- if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) !=RESET)
- {
- __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2);
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
- /* Input capture event */
- if((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00)
- {
- HAL_TIM_IC_CaptureCallback(htim);
- }
- /* Output compare event */
- else
- {
- HAL_TIM_OC_DelayElapsedCallback(htim);
- HAL_TIM_PWM_PulseFinishedCallback(htim);
- }
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
- }
- }
- /* Capture compare 3 event */
- if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET)
- {
- if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) !=RESET)
- {
- __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3);
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
- /* Input capture event */
- if((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00)
- {
- HAL_TIM_IC_CaptureCallback(htim);
- }
- /* Output compare event */
- else
- {
- HAL_TIM_OC_DelayElapsedCallback(htim);
- HAL_TIM_PWM_PulseFinishedCallback(htim);
- }
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
- }
- }
- /* Capture compare 4 event */
- if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET)
- {
- if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) !=RESET)
- {
- __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4);
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
- /* Input capture event */
- if((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00)
- {
- HAL_TIM_IC_CaptureCallback(htim);
- }
- /* Output compare event */
- else
- {
- HAL_TIM_OC_DelayElapsedCallback(htim);
- HAL_TIM_PWM_PulseFinishedCallback(htim);
- }
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
- }
- }
- /* TIM Update event */
- if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET)
- {
- if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) !=RESET)
- {
- __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE);
- HAL_TIM_PeriodElapsedCallback(htim);
- }
- }
- /* TIM Break input event */
- if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET)
- {
- if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) !=RESET)
- {
- __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK);
- HAL_TIMEx_BreakCallback(htim);
- }
- }
- /* TIM Trigger detection event */
- if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET)
- {
- if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) !=RESET)
- {
- __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER);
- HAL_TIM_TriggerCallback(htim);
- }
- }
- /* TIM commutation event */
- if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET)
- {
- if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) !=RESET)
- {
- __HAL_TIM_CLEAR_IT(htim, TIM_FLAG_COM);
- HAL_TIMEx_CommutationCallback(htim);
- }
- }
-}
-
-/**
- * @}
- */
-
-/** @defgroup TIM_Exported_Functions_Group8 Peripheral Control functions
- * @brief Peripheral Control functions
- *
-@verbatim
- ==============================================================================
- ##### Peripheral Control functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode.
- (+) Configure External Clock source.
- (+) Configure Complementary channels, break features and dead time.
- (+) Configure Master and the Slave synchronization.
- (+) Configure the DMA Burst Mode.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the TIM Output Compare Channels according to the specified
- * parameters in the TIM_OC_InitTypeDef.
- * @param htim : TIM Output Compare handle
- * @param sConfig : TIM Output Compare configuration structure
- * @param Channel : TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CHANNELS(Channel));
- assert_param(IS_TIM_OC_MODE(sConfig->OCMode));
- assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
-
- /* Check input state */
- __HAL_LOCK(htim);
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
- /* Configure the TIM Channel 1 in Output Compare */
- TIM_OC1_SetConfig(htim->Instance, sConfig);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
- /* Configure the TIM Channel 2 in Output Compare */
- TIM_OC2_SetConfig(htim->Instance, sConfig);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
- /* Configure the TIM Channel 3 in Output Compare */
- TIM_OC3_SetConfig(htim->Instance, sConfig);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
- /* Configure the TIM Channel 4 in Output Compare */
- TIM_OC4_SetConfig(htim->Instance, sConfig);
- }
- break;
-
- default:
- break;
- }
- htim->State = HAL_TIM_STATE_READY;
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the TIM Input Capture Channels according to the specified
- * parameters in the TIM_IC_InitTypeDef.
- * @param htim : TIM IC handle
- * @param sConfig : TIM Input Capture configuration structure
- * @param Channel : TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
- assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity));
- assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection));
- assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler));
- assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter));
-
- __HAL_LOCK(htim);
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- if (Channel == TIM_CHANNEL_1)
- {
- /* TI1 Configuration */
- TIM_TI1_SetConfig(htim->Instance,
- sConfig->ICPolarity,
- sConfig->ICSelection,
- sConfig->ICFilter);
-
- /* Reset the IC1PSC Bits */
- htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
-
- /* Set the IC1PSC value */
- htim->Instance->CCMR1 |= sConfig->ICPrescaler;
- }
- else if (Channel == TIM_CHANNEL_2)
- {
- /* TI2 Configuration */
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
-
- TIM_TI2_SetConfig(htim->Instance,
- sConfig->ICPolarity,
- sConfig->ICSelection,
- sConfig->ICFilter);
-
- /* Reset the IC2PSC Bits */
- htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
-
- /* Set the IC2PSC value */
- htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8);
- }
- else if (Channel == TIM_CHANNEL_3)
- {
- /* TI3 Configuration */
- assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
-
- TIM_TI3_SetConfig(htim->Instance,
- sConfig->ICPolarity,
- sConfig->ICSelection,
- sConfig->ICFilter);
-
- /* Reset the IC3PSC Bits */
- htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC;
-
- /* Set the IC3PSC value */
- htim->Instance->CCMR2 |= sConfig->ICPrescaler;
- }
- else
- {
- /* TI4 Configuration */
- assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
-
- TIM_TI4_SetConfig(htim->Instance,
- sConfig->ICPolarity,
- sConfig->ICSelection,
- sConfig->ICFilter);
-
- /* Reset the IC4PSC Bits */
- htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC;
-
- /* Set the IC4PSC value */
- htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8);
- }
-
- htim->State = HAL_TIM_STATE_READY;
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the TIM PWM channels according to the specified
- * parameters in the TIM_OC_InitTypeDef.
- * @param htim : TIM handle
- * @param sConfig : TIM PWM configuration structure
- * @param Channel : TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
-{
- __HAL_LOCK(htim);
-
- /* Check the parameters */
- assert_param(IS_TIM_CHANNELS(Channel));
- assert_param(IS_TIM_PWM_MODE(sConfig->OCMode));
- assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
- assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode));
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
- /* Configure the Channel 1 in PWM mode */
- TIM_OC1_SetConfig(htim->Instance, sConfig);
-
- /* Set the Preload enable bit for channel1 */
- htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE;
-
- /* Configure the Output Fast mode */
- htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE;
- htim->Instance->CCMR1 |= sConfig->OCFastMode;
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
- /* Configure the Channel 2 in PWM mode */
- TIM_OC2_SetConfig(htim->Instance, sConfig);
-
- /* Set the Preload enable bit for channel2 */
- htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE;
-
- /* Configure the Output Fast mode */
- htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE;
- htim->Instance->CCMR1 |= sConfig->OCFastMode << 8;
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
- /* Configure the Channel 3 in PWM mode */
- TIM_OC3_SetConfig(htim->Instance, sConfig);
-
- /* Set the Preload enable bit for channel3 */
- htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE;
-
- /* Configure the Output Fast mode */
- htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE;
- htim->Instance->CCMR2 |= sConfig->OCFastMode;
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
- /* Configure the Channel 4 in PWM mode */
- TIM_OC4_SetConfig(htim->Instance, sConfig);
-
- /* Set the Preload enable bit for channel4 */
- htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE;
-
- /* Configure the Output Fast mode */
- htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE;
- htim->Instance->CCMR2 |= sConfig->OCFastMode << 8;
- }
- break;
-
- default:
- break;
- }
-
- htim->State = HAL_TIM_STATE_READY;
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the TIM One Pulse Channels according to the specified
- * parameters in the TIM_OnePulse_InitTypeDef.
- * @param htim : TIM One Pulse handle
- * @param sConfig : TIM One Pulse configuration structure
- * @param OutputChannel : TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @param InputChannel : TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel)
-{
- TIM_OC_InitTypeDef temp1;
-
- /* Check the parameters */
- assert_param(IS_TIM_OPM_CHANNELS(OutputChannel));
- assert_param(IS_TIM_OPM_CHANNELS(InputChannel));
-
- if(OutputChannel != InputChannel)
- {
- __HAL_LOCK(htim);
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- /* Extract the Ouput compare configuration from sConfig structure */
- temp1.OCMode = sConfig->OCMode;
- temp1.Pulse = sConfig->Pulse;
- temp1.OCPolarity = sConfig->OCPolarity;
- temp1.OCNPolarity = sConfig->OCNPolarity;
- temp1.OCIdleState = sConfig->OCIdleState;
- temp1.OCNIdleState = sConfig->OCNIdleState;
-
- switch (OutputChannel)
- {
- case TIM_CHANNEL_1:
- {
- assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
-
- TIM_OC1_SetConfig(htim->Instance, &temp1);
- }
- break;
- case TIM_CHANNEL_2:
- {
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
-
- TIM_OC2_SetConfig(htim->Instance, &temp1);
- }
- break;
- default:
- break;
- }
- switch (InputChannel)
- {
- case TIM_CHANNEL_1:
- {
- assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
-
- TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity,
- sConfig->ICSelection, sConfig->ICFilter);
-
- /* Reset the IC1PSC Bits */
- htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
-
- /* Select the Trigger source */
- htim->Instance->SMCR &= ~TIM_SMCR_TS;
- htim->Instance->SMCR |= TIM_TS_TI1FP1;
-
- /* Select the Slave Mode */
- htim->Instance->SMCR &= ~TIM_SMCR_SMS;
- htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
- }
- break;
- case TIM_CHANNEL_2:
- {
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
-
- TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity,
- sConfig->ICSelection, sConfig->ICFilter);
-
- /* Reset the IC2PSC Bits */
- htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
-
- /* Select the Trigger source */
- htim->Instance->SMCR &= ~TIM_SMCR_TS;
- htim->Instance->SMCR |= TIM_TS_TI2FP2;
-
- /* Select the Slave Mode */
- htim->Instance->SMCR &= ~TIM_SMCR_SMS;
- htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
- }
- break;
-
- default:
- break;
- }
-
- htim->State = HAL_TIM_STATE_READY;
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
- else
- {
- return HAL_ERROR;
- }
-}
-
-/**
- * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral
- * @param htim : TIM handle
- * @param BurstBaseAddress : TIM Base address from where the DMA will start the Data write
- * This parameter can be one of the following values:
- * @arg TIM_DMABASE_CR1
- * @arg TIM_DMABASE_CR2
- * @arg TIM_DMABASE_SMCR
- * @arg TIM_DMABASE_DIER
- * @arg TIM_DMABASE_SR
- * @arg TIM_DMABASE_EGR
- * @arg TIM_DMABASE_CCMR1
- * @arg TIM_DMABASE_CCMR2
- * @arg TIM_DMABASE_CCER
- * @arg TIM_DMABASE_CNT
- * @arg TIM_DMABASE_PSC
- * @arg TIM_DMABASE_ARR
- * @arg TIM_DMABASE_RCR
- * @arg TIM_DMABASE_CCR1
- * @arg TIM_DMABASE_CCR2
- * @arg TIM_DMABASE_CCR3
- * @arg TIM_DMABASE_CCR4
- * @arg TIM_DMABASE_BDTR
- * @arg TIM_DMABASE_DCR
- * @param BurstRequestSrc : TIM DMA Request sources
- * This parameter can be one of the following values:
- * @arg TIM_DMA_UPDATE: TIM update Interrupt source
- * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
- * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
- * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
- * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
- * @arg TIM_DMA_COM: TIM Commutation DMA source
- * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
- * @param BurstBuffer : The Buffer address.
- * @param BurstLength : DMA Burst length. This parameter can be one value
- * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
- uint32_t* BurstBuffer, uint32_t BurstLength)
-{
- /* Check the parameters */
- assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
- assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
- assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
- assert_param(IS_TIM_DMA_LENGTH(BurstLength));
-
- if((htim->State == HAL_TIM_STATE_BUSY))
- {
- return HAL_BUSY;
- }
- else if((htim->State == HAL_TIM_STATE_READY))
- {
- if((BurstBuffer == 0 ) && (BurstLength > 0))
- {
- return HAL_ERROR;
- }
- else
- {
- htim->State = HAL_TIM_STATE_BUSY;
- }
- }
- switch(BurstRequestSrc)
- {
- case TIM_DMA_UPDATE:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
- }
- break;
- case TIM_DMA_CC1:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
- }
- break;
- case TIM_DMA_CC2:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
- }
- break;
- case TIM_DMA_CC3:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
- }
- break;
- case TIM_DMA_CC4:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
- }
- break;
- case TIM_DMA_COM:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
- }
- break;
- case TIM_DMA_TRIGGER:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
- }
- break;
- default:
- break;
- }
- /* configure the DMA Burst Mode */
- htim->Instance->DCR = BurstBaseAddress | BurstLength;
-
- /* Enable the TIM DMA Request */
- __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
-
- htim->State = HAL_TIM_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM DMA Burst mode
- * @param htim : TIM handle
- * @param BurstRequestSrc : TIM DMA Request sources to disable
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
-{
- /* Check the parameters */
- assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
-
- /* Abort the DMA transfer (at least disable the DMA channel) */
- switch(BurstRequestSrc)
- {
- case TIM_DMA_UPDATE:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]);
- }
- break;
- case TIM_DMA_CC1:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]);
- }
- break;
- case TIM_DMA_CC2:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]);
- }
- break;
- case TIM_DMA_CC3:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]);
- }
- break;
- case TIM_DMA_CC4:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]);
- }
- break;
- case TIM_DMA_COM:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_COMMUTATION]);
- }
- break;
- case TIM_DMA_TRIGGER:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]);
- }
- break;
- default:
- break;
- }
-
- /* Disable the TIM Update DMA request */
- __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory
- * @param htim : TIM handle
- * @param BurstBaseAddress : TIM Base address from where the DMA will starts the Data read
- * This parameter can be one of the following values:
- * @arg TIM_DMABASE_CR1
- * @arg TIM_DMABASE_CR2
- * @arg TIM_DMABASE_SMCR
- * @arg TIM_DMABASE_DIER
- * @arg TIM_DMABASE_SR
- * @arg TIM_DMABASE_EGR
- * @arg TIM_DMABASE_CCMR1
- * @arg TIM_DMABASE_CCMR2
- * @arg TIM_DMABASE_CCER
- * @arg TIM_DMABASE_CNT
- * @arg TIM_DMABASE_PSC
- * @arg TIM_DMABASE_ARR
- * @arg TIM_DMABASE_RCR
- * @arg TIM_DMABASE_CCR1
- * @arg TIM_DMABASE_CCR2
- * @arg TIM_DMABASE_CCR3
- * @arg TIM_DMABASE_CCR4
- * @arg TIM_DMABASE_BDTR
- * @arg TIM_DMABASE_DCR
- * @param BurstRequestSrc : TIM DMA Request sources
- * This parameter can be one of the following values:
- * @arg TIM_DMA_UPDATE: TIM update Interrupt source
- * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
- * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
- * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
- * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
- * @arg TIM_DMA_COM: TIM Commutation DMA source
- * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
- * @param BurstBuffer : The Buffer address.
- * @param BurstLength : DMA Burst length. This parameter can be one value
- * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
- uint32_t *BurstBuffer, uint32_t BurstLength)
-{
- /* Check the parameters */
- assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
- assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
- assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
- assert_param(IS_TIM_DMA_LENGTH(BurstLength));
-
- if((htim->State == HAL_TIM_STATE_BUSY))
- {
- return HAL_BUSY;
- }
- else if((htim->State == HAL_TIM_STATE_READY))
- {
- if((BurstBuffer == 0 ) && (BurstLength > 0))
- {
- return HAL_ERROR;
- }
- else
- {
- htim->State = HAL_TIM_STATE_BUSY;
- }
- }
- switch(BurstRequestSrc)
- {
- case TIM_DMA_UPDATE:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
- }
- break;
- case TIM_DMA_CC1:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
- }
- break;
- case TIM_DMA_CC2:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
- }
- break;
- case TIM_DMA_CC3:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
- }
- break;
- case TIM_DMA_CC4:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
- }
- break;
- case TIM_DMA_COM:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
- }
- break;
- case TIM_DMA_TRIGGER:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
- }
- break;
- default:
- break;
- }
-
- /* configure the DMA Burst Mode */
- htim->Instance->DCR = BurstBaseAddress | BurstLength;
-
- /* Enable the TIM DMA Request */
- __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
-
- htim->State = HAL_TIM_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stop the DMA burst reading
- * @param htim : TIM handle
- * @param BurstRequestSrc : TIM DMA Request sources to disable.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
-{
- /* Check the parameters */
- assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
-
- /* Abort the DMA transfer (at least disable the DMA channel) */
- switch(BurstRequestSrc)
- {
- case TIM_DMA_UPDATE:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]);
- }
- break;
- case TIM_DMA_CC1:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]);
- }
- break;
- case TIM_DMA_CC2:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]);
- }
- break;
- case TIM_DMA_CC3:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]);
- }
- break;
- case TIM_DMA_CC4:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]);
- }
- break;
- case TIM_DMA_COM:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_COMMUTATION]);
- }
- break;
- case TIM_DMA_TRIGGER:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]);
- }
- break;
- default:
- break;
- }
-
- /* Disable the TIM Update DMA request */
- __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Generate a software event
- * @param htim : TIM handle
- * @param EventSource : specifies the event source.
- * This parameter can be one of the following values:
- * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source
- * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source
- * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source
- * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source
- * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source
- * @arg TIM_EVENTSOURCE_COM: Timer COM event source
- * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source
- * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source
- * @note TIM6 and TIM7 can only generate an update event.
- * @note TIM_EVENTSOURCE_COM and TIM_EVENTSOURCE_BREAK are used only with TIM1, TIM15, TIM16 and TIM17.
- * @retval HAL status
- */
-
-HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource)
-{
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
- assert_param(IS_TIM_EVENT_SOURCE(EventSource));
-
- /* Process Locked */
- __HAL_LOCK(htim);
-
- /* Change the TIM state */
- htim->State = HAL_TIM_STATE_BUSY;
-
- /* Set the event sources */
- htim->Instance->EGR = EventSource;
-
- /* Change the TIM state */
- htim->State = HAL_TIM_STATE_READY;
-
- __HAL_UNLOCK(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Configures the OCRef clear feature
- * @param htim : TIM handle
- * @param sClearInputConfig : pointer to a TIM_ClearInputConfigTypeDef structure that
- * contains the OCREF clear feature and parameters for the TIM peripheral.
- * @param Channel : specifies the TIM Channel
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1
- * @arg TIM_CHANNEL_2: TIM Channel 2
- * @arg TIM_CHANNEL_3: TIM Channel 3
- * @arg TIM_CHANNEL_4: TIM Channel 4
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel)
-{
- uint32_t tmpsmcr = 0;
-
- /* Check the parameters */
- assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance));
- assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource));
- assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity));
- assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler));
- assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter));
-
- /* Process Locked */
- __HAL_LOCK(htim);
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- switch (sClearInputConfig->ClearInputSource)
- {
- case TIM_CLEARINPUTSOURCE_NONE:
- {
- /* Clear the OCREF clear selection bit */
- tmpsmcr &= ~TIM_SMCR_OCCS;
-
- /* Clear the ETR Bits */
- tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
-
- /* Set TIMx_SMCR */
- htim->Instance->SMCR = tmpsmcr;
- }
- break;
-
- case TIM_CLEARINPUTSOURCE_ETR:
- {
- TIM_ETR_SetConfig(htim->Instance,
- sClearInputConfig->ClearInputPrescaler,
- sClearInputConfig->ClearInputPolarity,
- sClearInputConfig->ClearInputFilter);
-
- /* Set the OCREF clear selection bit */
- htim->Instance->SMCR |= TIM_SMCR_OCCS;
- }
- break;
- default:
- break;
- }
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- if(sClearInputConfig->ClearInputState != RESET)
- {
- /* Enable the Ocref clear feature for Channel 1 */
- htim->Instance->CCMR1 |= TIM_CCMR1_OC1CE;
- }
- else
- {
- /* Disable the Ocref clear feature for Channel 1 */
- htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1CE;
- }
- }
- break;
- case TIM_CHANNEL_2:
- {
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
- if(sClearInputConfig->ClearInputState != RESET)
- {
- /* Enable the Ocref clear feature for Channel 2 */
- htim->Instance->CCMR1 |= TIM_CCMR1_OC2CE;
- }
- else
- {
- /* Disable the Ocref clear feature for Channel 2 */
- htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2CE;
- }
- }
- break;
- case TIM_CHANNEL_3:
- {
- assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
- if(sClearInputConfig->ClearInputState != RESET)
- {
- /* Enable the Ocref clear feature for Channel 3 */
- htim->Instance->CCMR2 |= TIM_CCMR2_OC3CE;
- }
- else
- {
- /* Disable the Ocref clear feature for Channel 3 */
- htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3CE;
- }
- }
- break;
- case TIM_CHANNEL_4:
- {
- assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
- if(sClearInputConfig->ClearInputState != RESET)
- {
- /* Enable the Ocref clear feature for Channel 4 */
- htim->Instance->CCMR2 |= TIM_CCMR2_OC4CE;
- }
- else
- {
- /* Disable the Ocref clear feature for Channel 4 */
- htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4CE;
- }
- }
- break;
- default:
- break;
- }
-
- htim->State = HAL_TIM_STATE_READY;
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Configures the clock source to be used
- * @param htim : TIM handle
- * @param sClockSourceConfig : pointer to a TIM_ClockConfigTypeDef structure that
- * contains the clock source information for the TIM peripheral.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig)
-{
- uint32_t tmpsmcr = 0;
-
- /* Process Locked */
- __HAL_LOCK(htim);
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- /* Check the parameters */
- assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource));
-
- /* Reset the SMS, TS, ECE, ETPS and ETRF bits */
- tmpsmcr = htim->Instance->SMCR;
- tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
- tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
- htim->Instance->SMCR = tmpsmcr;
-
- switch (sClockSourceConfig->ClockSource)
- {
- case TIM_CLOCKSOURCE_INTERNAL:
- {
- assert_param(IS_TIM_INSTANCE(htim->Instance));
- /* Disable slave mode to clock the prescaler directly with the internal clock */
- htim->Instance->SMCR &= ~TIM_SMCR_SMS;
- }
- break;
-
- case TIM_CLOCKSOURCE_ETRMODE1:
- {
- /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/
- assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance));
-
- /* Check ETR input conditioning related parameters */
- assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
- assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
- assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
-
- /* Configure the ETR Clock source */
- TIM_ETR_SetConfig(htim->Instance,
- sClockSourceConfig->ClockPrescaler,
- sClockSourceConfig->ClockPolarity,
- sClockSourceConfig->ClockFilter);
- /* Get the TIMx SMCR register value */
- tmpsmcr = htim->Instance->SMCR;
- /* Reset the SMS and TS Bits */
- tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
- /* Select the External clock mode1 and the ETRF trigger */
- tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1);
- /* Write to TIMx SMCR */
- htim->Instance->SMCR = tmpsmcr;
- }
- break;
-
- case TIM_CLOCKSOURCE_ETRMODE2:
- {
- /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/
- assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance));
-
- /* Check ETR input conditioning related parameters */
- assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
- assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
- assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
-
- /* Configure the ETR Clock source */
- TIM_ETR_SetConfig(htim->Instance,
- sClockSourceConfig->ClockPrescaler,
- sClockSourceConfig->ClockPolarity,
- sClockSourceConfig->ClockFilter);
- /* Enable the External clock mode2 */
- htim->Instance->SMCR |= TIM_SMCR_ECE;
- }
- break;
-
- case TIM_CLOCKSOURCE_TI1:
- {
- /* Check whether or not the timer instance supports external clock mode 1 */
- assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
-
- /* Check TI1 input conditioning related parameters */
- assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
- assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
-
- TIM_TI1_ConfigInputStage(htim->Instance,
- sClockSourceConfig->ClockPolarity,
- sClockSourceConfig->ClockFilter);
- TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1);
- }
- break;
- case TIM_CLOCKSOURCE_TI2:
- {
- /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/
- assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
-
- /* Check TI2 input conditioning related parameters */
- assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
- assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
-
- TIM_TI2_ConfigInputStage(htim->Instance,
- sClockSourceConfig->ClockPolarity,
- sClockSourceConfig->ClockFilter);
- TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2);
- }
- break;
- case TIM_CLOCKSOURCE_TI1ED:
- {
- /* Check whether or not the timer instance supports external clock mode 1 */
- assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
-
- /* Check TI1 input conditioning related parameters */
- assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
- assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
-
- TIM_TI1_ConfigInputStage(htim->Instance,
- sClockSourceConfig->ClockPolarity,
- sClockSourceConfig->ClockFilter);
- TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED);
- }
- break;
- case TIM_CLOCKSOURCE_ITR0:
- {
- /* Check whether or not the timer instance supports external clock mode 1 */
- assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
-
- TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR0);
- }
- break;
- case TIM_CLOCKSOURCE_ITR1:
- {
- /* Check whether or not the timer instance supports external clock mode 1 */
- assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
-
- TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR1);
- }
- break;
- case TIM_CLOCKSOURCE_ITR2:
- {
- /* Check whether or not the timer instance supports external clock mode 1 */
- assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
-
- TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR2);
- }
- break;
- case TIM_CLOCKSOURCE_ITR3:
- {
- /* Check whether or not the timer instance supports external clock mode 1 */
- assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
-
- TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR3);
- }
- break;
-
- default:
- break;
- }
- htim->State = HAL_TIM_STATE_READY;
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Selects the signal connected to the TI1 input: direct from CH1_input
- * or a XOR combination between CH1_input, CH2_input & CH3_input
- * @param htim : TIM handle.
- * @param TI1_Selection : Indicate whether or not channel 1 is connected to the
- * output of a XOR gate.
- * This parameter can be one of the following values:
- * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input
- * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3
- * pins are connected to the TI1 input (XOR combination)
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection)
-{
- uint32_t tmpcr2 = 0;
-
- /* Check the parameters */
- assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
- assert_param(IS_TIM_TI1SELECTION(TI1_Selection));
-
- /* Get the TIMx CR2 register value */
- tmpcr2 = htim->Instance->CR2;
-
- /* Reset the TI1 selection */
- tmpcr2 &= ~TIM_CR2_TI1S;
-
- /* Set the the TI1 selection */
- tmpcr2 |= TI1_Selection;
-
- /* Write to TIMxCR2 */
- htim->Instance->CR2 = tmpcr2;
-
- return HAL_OK;
-}
-
-/**
- * @brief Configures the TIM in Slave mode
- * @param htim : TIM handle.
- * @param sSlaveConfig : pointer to a TIM_SlaveConfigTypeDef structure that
- * contains the selected trigger (internal trigger input, filtered
- * timer input or external trigger input) and the ) and the Slave
- * mode (Disable, Reset, Gated, Trigger, External clock mode 1).
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig)
-{
- /* Check the parameters */
- assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
- assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
- assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
-
- __HAL_LOCK(htim);
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- TIM_SlaveTimer_SetConfig(htim, sSlaveConfig);
-
- /* Disable Trigger Interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER);
-
- /* Disable Trigger DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
-
- htim->State = HAL_TIM_STATE_READY;
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
- }
-
-/**
- * @brief Configures the TIM in Slave mode in interrupt mode
- * @param htim: TIM handle.
- * @param sSlaveConfig: pointer to a TIM_SlaveConfigTypeDef structure that
- * contains the selected trigger (internal trigger input, filtered
- * timer input or external trigger input) and the ) and the Slave
- * mode (Disable, Reset, Gated, Trigger, External clock mode 1).
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim,
- TIM_SlaveConfigTypeDef * sSlaveConfig)
- {
- /* Check the parameters */
- assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
- assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
- assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
-
- __HAL_LOCK(htim);
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- TIM_SlaveTimer_SetConfig(htim, sSlaveConfig);
-
- /* Enable Trigger Interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER);
-
- /* Disable Trigger DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
-
- htim->State = HAL_TIM_STATE_READY;
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Read the captured value from Capture Compare unit
- * @param htim : TIM handle.
- * @param Channel : TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1 : TIM Channel 1 selected
- * @arg TIM_CHANNEL_2 : TIM Channel 2 selected
- * @arg TIM_CHANNEL_3 : TIM Channel 3 selected
- * @arg TIM_CHANNEL_4 : TIM Channel 4 selected
- * @retval Captured value
- */
-uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- uint32_t tmpreg = 0;
-
- __HAL_LOCK(htim);
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Check the parameters */
- assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
-
- /* Return the capture 1 value */
- tmpreg = htim->Instance->CCR1;
-
- break;
- }
- case TIM_CHANNEL_2:
- {
- /* Check the parameters */
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
-
- /* Return the capture 2 value */
- tmpreg = htim->Instance->CCR2;
-
- break;
- }
-
- case TIM_CHANNEL_3:
- {
- /* Check the parameters */
- assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
-
- /* Return the capture 3 value */
- tmpreg = htim->Instance->CCR3;
-
- break;
- }
-
- case TIM_CHANNEL_4:
- {
- /* Check the parameters */
- assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
-
- /* Return the capture 4 value */
- tmpreg = htim->Instance->CCR4;
-
- break;
- }
-
- default:
- break;
- }
-
- __HAL_UNLOCK(htim);
- return tmpreg;
-}
-
-/**
- * @}
- */
-
-/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions
- * @brief TIM Callbacks functions
- *
-@verbatim
- ==============================================================================
- ##### TIM Callbacks functions #####
- ==============================================================================
- [..]
- This section provides TIM callback functions:
- (+) Timer Period elapsed callback
- (+) Timer Output Compare callback
- (+) Timer Input capture callback
- (+) Timer Trigger callback
- (+) Timer Error callback
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Period elapsed callback in non blocking mode
- * @param htim : TIM handle
- * @retval None
- */
-__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(htim);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the __HAL_TIM_PeriodElapsedCallback could be implemented in the user file
- */
-
-}
-/**
- * @brief Output Compare callback in non blocking mode
- * @param htim : TIM OC handle
- * @retval None
- */
-__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(htim);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the __HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file
- */
-}
-/**
- * @brief Input Capture callback in non blocking mode
- * @param htim : TIM IC handle
- * @retval None
- */
-__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(htim);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the __HAL_TIM_IC_CaptureCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief PWM Pulse finished callback in non blocking mode
- * @param htim : TIM handle
- * @retval None
- */
-__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(htim);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the __HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Hall Trigger detection callback in non blocking mode
- * @param htim : TIM handle
- * @retval None
- */
-__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(htim);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_TriggerCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Timer error callback in non blocking mode
- * @param htim : TIM handle
- * @retval None
- */
-__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(htim);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_ErrorCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup TIM_Exported_Functions_Group10 Peripheral State functions
- * @brief Peripheral State functions
- *
-@verbatim
- ==============================================================================
- ##### Peripheral State functions #####
- ==============================================================================
- [..]
- This subsection permit to get in run-time the status of the peripheral
- and the data flow.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Return the TIM Base state
- * @param htim : TIM Base handle
- * @retval HAL state
- */
-HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim)
-{
- return htim->State;
-}
-
-/**
- * @brief Return the TIM OC state
- * @param htim : TIM Ouput Compare handle
- * @retval HAL state
- */
-HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim)
-{
- return htim->State;
-}
-
-/**
- * @brief Return the TIM PWM state
- * @param htim : TIM handle
- * @retval HAL state
- */
-HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim)
-{
- return htim->State;
-}
-
-/**
- * @brief Return the TIM Input Capture state
- * @param htim : TIM IC handle
- * @retval HAL state
- */
-HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim)
-{
- return htim->State;
-}
-
-/**
- * @brief Return the TIM One Pulse Mode state
- * @param htim : TIM OPM handle
- * @retval HAL state
- */
-HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim)
-{
- return htim->State;
-}
-
-/**
- * @brief Return the TIM Encoder Mode state
- * @param htim : TIM Encoder handle
- * @retval HAL state
- */
-HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim)
-{
- return htim->State;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/** @addtogroup TIM_Private_Functions
- * @{
- */
-
-/**
- * @brief TIM DMA error callback
- * @param hdma : pointer to DMA handle.
- * @retval None
- */
-void TIM_DMAError(DMA_HandleTypeDef *hdma)
-{
- TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- htim->State= HAL_TIM_STATE_READY;
-
- HAL_TIM_ErrorCallback(htim);
-}
-
-/**
- * @brief TIM DMA Delay Pulse complete callback.
- * @param hdma : pointer to DMA handle.
- * @retval None
- */
-void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma)
-{
- TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- htim->State= HAL_TIM_STATE_READY;
-
- if (hdma == htim->hdma[TIM_DMA_ID_CC1])
- {
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
- }
- else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
- {
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
- }
- else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
- {
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
- }
- else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
- {
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
- }
-
- HAL_TIM_PWM_PulseFinishedCallback(htim);
-
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
-}
-/**
- * @brief TIM DMA Capture complete callback.
- * @param hdma : pointer to DMA handle.
- * @retval None
- */
-void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma)
-{
- TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- htim->State= HAL_TIM_STATE_READY;
-
- if (hdma == htim->hdma[TIM_DMA_ID_CC1])
- {
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
- }
- else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
- {
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
- }
- else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
- {
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
- }
- else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
- {
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
- }
-
- HAL_TIM_IC_CaptureCallback(htim);
-
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
-}
-
-/**
- * @brief TIM DMA Period Elapse complete callback.
- * @param hdma : pointer to DMA handle.
- * @retval None
- */
-static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma)
-{
- TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- htim->State= HAL_TIM_STATE_READY;
-
- HAL_TIM_PeriodElapsedCallback(htim);
-}
-
-/**
- * @brief TIM DMA Trigger callback.
- * @param hdma : pointer to DMA handle.
- * @retval None
- */
-static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma)
-{
- TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- htim->State= HAL_TIM_STATE_READY;
-
- HAL_TIM_TriggerCallback(htim);
-}
-
-/**
- * @brief Time Base configuration
- * @param TIMx : TIM periheral
- * @param Structure : TIM Base configuration structure
- * @retval None
- */
-void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure)
-{
- uint32_t tmpcr1 = 0;
- tmpcr1 = TIMx->CR1;
-
- /* Set TIM Time Base Unit parameters ---------------------------------------*/
- if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx))
- {
- /* Select the Counter Mode */
- tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS);
- tmpcr1 |= Structure->CounterMode;
- }
-
- if(IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx))
- {
- /* Set the clock division */
- tmpcr1 &= ~TIM_CR1_CKD;
- tmpcr1 |= (uint32_t)Structure->ClockDivision;
- }
-
- TIMx->CR1 = tmpcr1;
-
- /* Set the Autoreload value */
- TIMx->ARR = (uint32_t)Structure->Period ;
-
- /* Set the Prescaler value */
- TIMx->PSC = (uint32_t)Structure->Prescaler;
-
- if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx))
- {
- /* Set the Repetition Counter value */
- TIMx->RCR = Structure->RepetitionCounter;
- }
-
- /* Generate an update event to reload the Prescaler
- and the repetition counter(only for TIM1 and TIM8) value immediatly */
- TIMx->EGR = TIM_EGR_UG;
-}
-
-/**
- * @brief Time Ouput Compare 1 configuration
- * @param TIMx to select the TIM peripheral
- * @param OC_Config : The ouput configuration structure
- * @retval None
- */
-static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
-{
- uint32_t tmpccmrx = 0;
- uint32_t tmpccer = 0;
- uint32_t tmpcr2 = 0;
-
- /* Disable the Channel 1: Reset the CC1E Bit */
- TIMx->CCER &= ~TIM_CCER_CC1E;
-
- /* Get the TIMx CCER register value */
- tmpccer = TIMx->CCER;
- /* Get the TIMx CR2 register value */
- tmpcr2 = TIMx->CR2;
-
- /* Get the TIMx CCMR1 register value */
- tmpccmrx = TIMx->CCMR1;
-
- /* Reset the Output Compare Mode Bits */
- tmpccmrx &= ~TIM_CCMR1_OC1M;
- tmpccmrx &= ~TIM_CCMR1_CC1S;
- /* Select the Output Compare Mode */
- tmpccmrx |= OC_Config->OCMode;
-
- /* Reset the Output Polarity level */
- tmpccer &= ~TIM_CCER_CC1P;
- /* Set the Output Compare Polarity */
- tmpccer |= OC_Config->OCPolarity;
-
- if(IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_1))
- {
- /* Check parameters */
- assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
-
- /* Reset the Output N Polarity level */
- tmpccer &= ~TIM_CCER_CC1NP;
- /* Set the Output N Polarity */
- tmpccer |= OC_Config->OCNPolarity;
- /* Reset the Output N State */
- tmpccer &= ~TIM_CCER_CC1NE;
- }
-
- if(IS_TIM_BREAK_INSTANCE(TIMx))
- {
- /* Check parameters */
- assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
- assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
-
- /* Reset the Output Compare and Output Compare N IDLE State */
- tmpcr2 &= ~TIM_CR2_OIS1;
- tmpcr2 &= ~TIM_CR2_OIS1N;
- /* Set the Output Idle state */
- tmpcr2 |= OC_Config->OCIdleState;
- /* Set the Output N Idle state */
- tmpcr2 |= OC_Config->OCNIdleState;
- }
- /* Write to TIMx CR2 */
- TIMx->CR2 = tmpcr2;
-
- /* Write to TIMx CCMR1 */
- TIMx->CCMR1 = tmpccmrx;
-
- /* Set the Capture Compare Register value */
- TIMx->CCR1 = OC_Config->Pulse;
-
- /* Write to TIMx CCER */
- TIMx->CCER = tmpccer;
-}
-
-/**
- * @brief Time Ouput Compare 2 configuration
- * @param TIMx to select the TIM peripheral
- * @param OC_Config : The ouput configuration structure
- * @retval None
- */
-void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
-{
- uint32_t tmpccmrx = 0;
- uint32_t tmpccer = 0;
- uint32_t tmpcr2 = 0;
-
- /* Disable the Channel 2: Reset the CC2E Bit */
- TIMx->CCER &= ~TIM_CCER_CC2E;
-
- /* Get the TIMx CCER register value */
- tmpccer = TIMx->CCER;
- /* Get the TIMx CR2 register value */
- tmpcr2 = TIMx->CR2;
-
- /* Get the TIMx CCMR1 register value */
- tmpccmrx = TIMx->CCMR1;
-
- /* Reset the Output Compare mode and Capture/Compare selection Bits */
- tmpccmrx &= ~TIM_CCMR1_OC2M;
- tmpccmrx &= ~TIM_CCMR1_CC2S;
-
- /* Select the Output Compare Mode */
- tmpccmrx |= (OC_Config->OCMode << 8);
-
- /* Reset the Output Polarity level */
- tmpccer &= ~TIM_CCER_CC2P;
- /* Set the Output Compare Polarity */
- tmpccer |= (OC_Config->OCPolarity << 4);
-
- if(IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_2))
- {
- assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
-
- /* Reset the Output N Polarity level */
- tmpccer &= ~TIM_CCER_CC2NP;
- /* Set the Output N Polarity */
- tmpccer |= (OC_Config->OCNPolarity << 4);
- /* Reset the Output N State */
- tmpccer &= ~TIM_CCER_CC2NE;
-
- }
-
- if(IS_TIM_BREAK_INSTANCE(TIMx))
- {
- /* Check parameters */
- assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
- assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
-
- /* Reset the Output Compare and Output Compare N IDLE State */
- tmpcr2 &= ~TIM_CR2_OIS2;
- tmpcr2 &= ~TIM_CR2_OIS2N;
- /* Set the Output Idle state */
- tmpcr2 |= (OC_Config->OCIdleState << 2);
- /* Set the Output N Idle state */
- tmpcr2 |= (OC_Config->OCNIdleState << 2);
- }
-
- /* Write to TIMx CR2 */
- TIMx->CR2 = tmpcr2;
-
- /* Write to TIMx CCMR1 */
- TIMx->CCMR1 = tmpccmrx;
-
- /* Set the Capture Compare Register value */
- TIMx->CCR2 = OC_Config->Pulse;
-
- /* Write to TIMx CCER */
- TIMx->CCER = tmpccer;
-}
-
-/**
- * @brief Time Ouput Compare 3 configuration
- * @param TIMx to select the TIM peripheral
- * @param OC_Config : The ouput configuration structure
- * @retval None
- */
-static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
-{
- uint32_t tmpccmrx = 0;
- uint32_t tmpccer = 0;
- uint32_t tmpcr2 = 0;
-
- /* Disable the Channel 3: Reset the CC2E Bit */
- TIMx->CCER &= ~TIM_CCER_CC3E;
-
- /* Get the TIMx CCER register value */
- tmpccer = TIMx->CCER;
- /* Get the TIMx CR2 register value */
- tmpcr2 = TIMx->CR2;
-
- /* Get the TIMx CCMR2 register value */
- tmpccmrx = TIMx->CCMR2;
-
- /* Reset the Output Compare mode and Capture/Compare selection Bits */
- tmpccmrx &= ~TIM_CCMR2_OC3M;
- tmpccmrx &= ~TIM_CCMR2_CC3S;
- /* Select the Output Compare Mode */
- tmpccmrx |= OC_Config->OCMode;
-
- /* Reset the Output Polarity level */
- tmpccer &= ~TIM_CCER_CC3P;
- /* Set the Output Compare Polarity */
- tmpccer |= (OC_Config->OCPolarity << 8);
-
- if(IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_3))
- {
- assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
-
- /* Reset the Output N Polarity level */
- tmpccer &= ~TIM_CCER_CC3NP;
- /* Set the Output N Polarity */
- tmpccer |= (OC_Config->OCNPolarity << 8);
- /* Reset the Output N State */
- tmpccer &= ~TIM_CCER_CC3NE;
- }
-
- if(IS_TIM_BREAK_INSTANCE(TIMx))
- {
- /* Check parameters */
- assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
- assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
-
- /* Reset the Output Compare and Output Compare N IDLE State */
- tmpcr2 &= ~TIM_CR2_OIS3;
- tmpcr2 &= ~TIM_CR2_OIS3N;
- /* Set the Output Idle state */
- tmpcr2 |= (OC_Config->OCIdleState << 4);
- /* Set the Output N Idle state */
- tmpcr2 |= (OC_Config->OCNIdleState << 4);
- }
-
- /* Write to TIMx CR2 */
- TIMx->CR2 = tmpcr2;
-
- /* Write to TIMx CCMR2 */
- TIMx->CCMR2 = tmpccmrx;
-
- /* Set the Capture Compare Register value */
- TIMx->CCR3 = OC_Config->Pulse;
-
- /* Write to TIMx CCER */
- TIMx->CCER = tmpccer;
-}
-
-/**
- * @brief Time Ouput Compare 4 configuration
- * @param TIMx to select the TIM peripheral
- * @param OC_Config : The ouput configuration structure
- * @retval None
- */
-static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
-{
- uint32_t tmpccmrx = 0;
- uint32_t tmpccer = 0;
- uint32_t tmpcr2 = 0;
-
- /* Disable the Channel 4: Reset the CC4E Bit */
- TIMx->CCER &= ~TIM_CCER_CC4E;
-
- /* Get the TIMx CCER register value */
- tmpccer = TIMx->CCER;
- /* Get the TIMx CR2 register value */
- tmpcr2 = TIMx->CR2;
-
- /* Get the TIMx CCMR2 register value */
- tmpccmrx = TIMx->CCMR2;
-
- /* Reset the Output Compare mode and Capture/Compare selection Bits */
- tmpccmrx &= ~TIM_CCMR2_OC4M;
- tmpccmrx &= ~TIM_CCMR2_CC4S;
-
- /* Select the Output Compare Mode */
- tmpccmrx |= (OC_Config->OCMode << 8);
-
- /* Reset the Output Polarity level */
- tmpccer &= ~TIM_CCER_CC4P;
- /* Set the Output Compare Polarity */
- tmpccer |= (OC_Config->OCPolarity << 12);
-
- if(IS_TIM_BREAK_INSTANCE(TIMx))
- {
- assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
-
- /* Reset the Output Compare IDLE State */
- tmpcr2 &= ~TIM_CR2_OIS4;
- /* Set the Output Idle state */
- tmpcr2 |= (OC_Config->OCIdleState << 6);
- }
-
- /* Write to TIMx CR2 */
- TIMx->CR2 = tmpcr2;
-
- /* Write to TIMx CCMR2 */
- TIMx->CCMR2 = tmpccmrx;
-
- /* Set the Capture Compare Register value */
- TIMx->CCR4 = OC_Config->Pulse;
-
- /* Write to TIMx CCER */
- TIMx->CCER = tmpccer;
-}
-
-
-/**
- * @brief Time Slave configuration
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param sSlaveConfig: The slave configuration structure
- * @retval None
- */
-static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
- TIM_SlaveConfigTypeDef * sSlaveConfig)
-{
- uint32_t tmpsmcr = 0;
- uint32_t tmpccmr1 = 0;
- uint32_t tmpccer = 0;
-
- /* Get the TIMx SMCR register value */
- tmpsmcr = htim->Instance->SMCR;
-
- /* Reset the Trigger Selection Bits */
- tmpsmcr &= ~TIM_SMCR_TS;
- /* Set the Input Trigger source */
- tmpsmcr |= sSlaveConfig->InputTrigger;
-
- /* Reset the slave mode Bits */
- tmpsmcr &= ~TIM_SMCR_SMS;
- /* Set the slave mode */
- tmpsmcr |= sSlaveConfig->SlaveMode;
-
- /* Write to TIMx SMCR */
- htim->Instance->SMCR = tmpsmcr;
-
- /* Configure the trigger prescaler, filter, and polarity */
- switch (sSlaveConfig->InputTrigger)
- {
- case TIM_TS_ETRF:
- {
- /* Check the parameters */
- assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance));
- assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler));
- assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
- assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
- /* Configure the ETR Trigger source */
- TIM_ETR_SetConfig(htim->Instance,
- sSlaveConfig->TriggerPrescaler,
- sSlaveConfig->TriggerPolarity,
- sSlaveConfig->TriggerFilter);
- }
- break;
-
- case TIM_TS_TI1F_ED:
- {
- /* Check the parameters */
- assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
- assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
-
- /* Disable the Channel 1: Reset the CC1E Bit */
- tmpccer = htim->Instance->CCER;
- htim->Instance->CCER &= ~TIM_CCER_CC1E;
- tmpccmr1 = htim->Instance->CCMR1;
-
- /* Set the filter */
- tmpccmr1 &= ~TIM_CCMR1_IC1F;
- tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4);
-
- /* Write to TIMx CCMR1 and CCER registers */
- htim->Instance->CCMR1 = tmpccmr1;
- htim->Instance->CCER = tmpccer;
-
- }
- break;
-
- case TIM_TS_TI1FP1:
- {
- /* Check the parameters */
- assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
- assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
- assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
-
- /* Configure TI1 Filter and Polarity */
- TIM_TI1_ConfigInputStage(htim->Instance,
- sSlaveConfig->TriggerPolarity,
- sSlaveConfig->TriggerFilter);
- }
- break;
-
- case TIM_TS_TI2FP2:
- {
- /* Check the parameters */
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
- assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
- assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
-
- /* Configure TI2 Filter and Polarity */
- TIM_TI2_ConfigInputStage(htim->Instance,
- sSlaveConfig->TriggerPolarity,
- sSlaveConfig->TriggerFilter);
- }
- break;
-
- case TIM_TS_ITR0:
- {
- /* Check the parameter */
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
- }
- break;
-
- case TIM_TS_ITR1:
- {
- /* Check the parameter */
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
- }
- break;
-
- case TIM_TS_ITR2:
- {
- /* Check the parameter */
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
- }
- break;
-
- case TIM_TS_ITR3:
- {
- /* Check the parameter */
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
- }
- break;
-
- default:
- break;
- }
-}
-
-/**
- * @brief Configure the TI1 as Input.
- * @param TIMx to select the TIM peripheral.
- * @param TIM_ICPolarity : The Input Polarity.
- * This parameter can be one of the following values:
- * @arg TIM_ICPOLARITY_RISING
- * @arg TIM_ICPOLARITY_FALLING
- * @arg TIM_ICPOLARITY_BOTHEDGE
- * @param TIM_ICSelection : specifies the input to be used.
- * This parameter can be one of the following values:
- * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 1 is selected to be connected to IC1.
- * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 1 is selected to be connected to IC2.
- * @arg TIM_ICSELECTION_TRC: TIM Input 1 is selected to be connected to TRC.
- * @param TIM_ICFilter : Specifies the Input Capture Filter.
- * This parameter must be a value between 0x00 and 0x0F.
- * @retval None
- * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1
- * (on channel2 path) is used as the input signal. Therefore CCMR1 must be
- * protected against un-initialized filter and polarity values.
- */
-void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
- uint32_t TIM_ICFilter)
-{
- uint32_t tmpccmr1 = 0;
- uint32_t tmpccer = 0;
-
- /* Disable the Channel 1: Reset the CC1E Bit */
- TIMx->CCER &= ~TIM_CCER_CC1E;
- tmpccmr1 = TIMx->CCMR1;
- tmpccer = TIMx->CCER;
-
- /* Select the Input */
- if(IS_TIM_CC2_INSTANCE(TIMx) != RESET)
- {
- tmpccmr1 &= ~TIM_CCMR1_CC1S;
- tmpccmr1 |= TIM_ICSelection;
- }
- else
- {
- tmpccmr1 |= TIM_CCMR1_CC1S_0;
- }
-
- /* Set the filter */
- tmpccmr1 &= ~TIM_CCMR1_IC1F;
- tmpccmr1 |= ((TIM_ICFilter << 4) & TIM_CCMR1_IC1F);
-
- /* Select the Polarity and set the CC1E Bit */
- tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
- tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP));
-
- /* Write to TIMx CCMR1 and CCER registers */
- TIMx->CCMR1 = tmpccmr1;
- TIMx->CCER = tmpccer;
-}
-
-/**
- * @brief Configure the Polarity and Filter for TI1.
- * @param TIMx to select the TIM peripheral.
- * @param TIM_ICPolarity : The Input Polarity.
- * This parameter can be one of the following values:
- * @arg TIM_ICPOLARITY_RISING
- * @arg TIM_ICPOLARITY_FALLING
- * @arg TIM_ICPOLARITY_BOTHEDGE
- * @param TIM_ICFilter : Specifies the Input Capture Filter.
- * This parameter must be a value between 0x00 and 0x0F.
- * @retval None
- */
-static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
-{
- uint32_t tmpccmr1 = 0;
- uint32_t tmpccer = 0;
-
- /* Disable the Channel 1: Reset the CC1E Bit */
- tmpccer = TIMx->CCER;
- TIMx->CCER &= ~TIM_CCER_CC1E;
- tmpccmr1 = TIMx->CCMR1;
-
- /* Set the filter */
- tmpccmr1 &= ~TIM_CCMR1_IC1F;
- tmpccmr1 |= (TIM_ICFilter << 4);
-
- /* Select the Polarity and set the CC1E Bit */
- tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
- tmpccer |= TIM_ICPolarity;
-
- /* Write to TIMx CCMR1 and CCER registers */
- TIMx->CCMR1 = tmpccmr1;
- TIMx->CCER = tmpccer;
-}
-
-/**
- * @brief Configure the TI2 as Input.
- * @param TIMx to select the TIM peripheral
- * @param TIM_ICPolarity : The Input Polarity.
- * This parameter can be one of the following values:
- * @arg TIM_ICPOLARITY_RISING
- * @arg TIM_ICPOLARITY_FALLING
- * @arg TIM_ICPOLARITY_BOTHEDGE
- * @param TIM_ICSelection : specifies the input to be used.
- * This parameter can be one of the following values:
- * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 2 is selected to be connected to IC2.
- * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1.
- * @arg TIM_ICSELECTION_TRC: TIM Input 2 is selected to be connected to TRC.
- * @param TIM_ICFilter : Specifies the Input Capture Filter.
- * This parameter must be a value between 0x00 and 0x0F.
- * @retval None
- * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2
- * (on channel1 path) is used as the input signal. Therefore CCMR1 must be
- * protected against un-initialized filter and polarity values.
- */
-static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
- uint32_t TIM_ICFilter)
-{
- uint32_t tmpccmr1 = 0;
- uint32_t tmpccer = 0;
-
- /* Disable the Channel 2: Reset the CC2E Bit */
- TIMx->CCER &= ~TIM_CCER_CC2E;
- tmpccmr1 = TIMx->CCMR1;
- tmpccer = TIMx->CCER;
-
- /* Select the Input */
- tmpccmr1 &= ~TIM_CCMR1_CC2S;
- tmpccmr1 |= (TIM_ICSelection << 8);
-
- /* Set the filter */
- tmpccmr1 &= ~TIM_CCMR1_IC2F;
- tmpccmr1 |= ((TIM_ICFilter << 12) & TIM_CCMR1_IC2F);
-
- /* Select the Polarity and set the CC2E Bit */
- tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
- tmpccer |= ((TIM_ICPolarity << 4) & (TIM_CCER_CC2P | TIM_CCER_CC2NP));
-
- /* Write to TIMx CCMR1 and CCER registers */
- TIMx->CCMR1 = tmpccmr1 ;
- TIMx->CCER = tmpccer;
-}
-
-/**
- * @brief Configure the Polarity and Filter for TI2.
- * @param TIMx to select the TIM peripheral.
- * @param TIM_ICPolarity : The Input Polarity.
- * This parameter can be one of the following values:
- * @arg TIM_ICPOLARITY_RISING
- * @arg TIM_ICPOLARITY_FALLING
- * @arg TIM_ICPOLARITY_BOTHEDGE
- * @param TIM_ICFilter : Specifies the Input Capture Filter.
- * This parameter must be a value between 0x00 and 0x0F.
- * @retval None
- */
-static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
-{
- uint32_t tmpccmr1 = 0;
- uint32_t tmpccer = 0;
-
- /* Disable the Channel 2: Reset the CC2E Bit */
- TIMx->CCER &= ~TIM_CCER_CC2E;
- tmpccmr1 = TIMx->CCMR1;
- tmpccer = TIMx->CCER;
-
- /* Set the filter */
- tmpccmr1 &= ~TIM_CCMR1_IC2F;
- tmpccmr1 |= (TIM_ICFilter << 12);
-
- /* Select the Polarity and set the CC2E Bit */
- tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
- tmpccer |= (TIM_ICPolarity << 4);
-
- /* Write to TIMx CCMR1 and CCER registers */
- TIMx->CCMR1 = tmpccmr1 ;
- TIMx->CCER = tmpccer;
-}
-
-/**
- * @brief Configure the TI3 as Input.
- * @param TIMx to select the TIM peripheral
- * @param TIM_ICPolarity : The Input Polarity.
- * This parameter can be one of the following values:
- * @arg TIM_ICPOLARITY_RISING
- * @arg TIM_ICPOLARITY_FALLING
- * @arg TIM_ICPOLARITY_BOTHEDGE
- * @param TIM_ICSelection : specifies the input to be used.
- * This parameter can be one of the following values:
- * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3.
- * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4.
- * @arg TIM_ICSELECTION_TRC: TIM Input 3 is selected to be connected to TRC.
- * @param TIM_ICFilter : Specifies the Input Capture Filter.
- * This parameter must be a value between 0x00 and 0x0F.
- * @retval None
- * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4
- * (on channel1 path) is used as the input signal. Therefore CCMR2 must be
- * protected against un-initialized filter and polarity values.
- */
-static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
- uint32_t TIM_ICFilter)
-{
- uint32_t tmpccmr2 = 0;
- uint32_t tmpccer = 0;
-
- /* Disable the Channel 3: Reset the CC3E Bit */
- TIMx->CCER &= ~TIM_CCER_CC3E;
- tmpccmr2 = TIMx->CCMR2;
- tmpccer = TIMx->CCER;
-
- /* Select the Input */
- tmpccmr2 &= ~TIM_CCMR2_CC3S;
- tmpccmr2 |= TIM_ICSelection;
-
- /* Set the filter */
- tmpccmr2 &= ~TIM_CCMR2_IC3F;
- tmpccmr2 |= ((TIM_ICFilter << 4) & TIM_CCMR2_IC3F);
-
- /* Select the Polarity and set the CC3E Bit */
- tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP);
- tmpccer |= ((TIM_ICPolarity << 8) & (TIM_CCER_CC3P | TIM_CCER_CC3NP));
-
- /* Write to TIMx CCMR2 and CCER registers */
- TIMx->CCMR2 = tmpccmr2;
- TIMx->CCER = tmpccer;
-}
-
-/**
- * @brief Configure the TI4 as Input.
- * @param TIMx to select the TIM peripheral
- * @param TIM_ICPolarity : The Input Polarity.
- * This parameter can be one of the following values:
- * @arg TIM_ICPOLARITY_RISING
- * @arg TIM_ICPOLARITY_FALLING
- * @arg TIM_ICPOLARITY_BOTHEDGE
- * @param TIM_ICSelection : specifies the input to be used.
- * This parameter can be one of the following values:
- * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4.
- * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3.
- * @arg TIM_ICSELECTION_TRC: TIM Input 4 is selected to be connected to TRC.
- * @param TIM_ICFilter : Specifies the Input Capture Filter.
- * This parameter must be a value between 0x00 and 0x0F.
- * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3
- * (on channel1 path) is used as the input signal. Therefore CCMR2 must be
- * protected against un-initialized filter and polarity values.
- * @retval None
- */
-static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
- uint32_t TIM_ICFilter)
-{
- uint32_t tmpccmr2 = 0;
- uint32_t tmpccer = 0;
-
- /* Disable the Channel 4: Reset the CC4E Bit */
- TIMx->CCER &= ~TIM_CCER_CC4E;
- tmpccmr2 = TIMx->CCMR2;
- tmpccer = TIMx->CCER;
-
- /* Select the Input */
- tmpccmr2 &= ~TIM_CCMR2_CC4S;
- tmpccmr2 |= (TIM_ICSelection << 8);
-
- /* Set the filter */
- tmpccmr2 &= ~TIM_CCMR2_IC4F;
- tmpccmr2 |= ((TIM_ICFilter << 12) & TIM_CCMR2_IC4F);
-
- /* Select the Polarity and set the CC4E Bit */
- tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP);
- tmpccer |= ((TIM_ICPolarity << 12) & (TIM_CCER_CC4P | TIM_CCER_CC4NP));
-
- /* Write to TIMx CCMR2 and CCER registers */
- TIMx->CCMR2 = tmpccmr2;
- TIMx->CCER = tmpccer ;
-}
-
-/**
- * @brief Selects the Input Trigger source
- * @param TIMx to select the TIM peripheral
- * @param InputTriggerSource : The Input Trigger source.
- * This parameter can be one of the following values:
- * @arg TIM_TS_ITR0 : Internal Trigger 0
- * @arg TIM_TS_ITR1 : Internal Trigger 1
- * @arg TIM_TS_ITR2 : Internal Trigger 2
- * @arg TIM_TS_ITR3 : Internal Trigger 3
- * @arg TIM_TS_TI1F_ED : TI1 Edge Detector
- * @arg TIM_TS_TI1FP1 : Filtered Timer Input 1
- * @arg TIM_TS_TI2FP2 : Filtered Timer Input 2
- * @arg TIM_TS_ETRF : External Trigger input
- * @retval None
- */
-static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint16_t InputTriggerSource)
-{
- uint32_t tmpsmcr = 0;
-
- /* Get the TIMx SMCR register value */
- tmpsmcr = TIMx->SMCR;
- /* Reset the TS Bits */
- tmpsmcr &= ~TIM_SMCR_TS;
- /* Set the Input Trigger source and the slave mode*/
- tmpsmcr |= InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1;
- /* Write to TIMx SMCR */
- TIMx->SMCR = tmpsmcr;
-}
-/**
- * @brief Configures the TIMx External Trigger (ETR).
- * @param TIMx to select the TIM peripheral
- * @param TIM_ExtTRGPrescaler : The external Trigger Prescaler.
- * This parameter can be one of the following values:
- * @arg TIM_ETRPRESCALER_DIV1: ETRP Prescaler OFF.
- * @arg TIM_ETRPRESCALER_DIV2: ETRP frequency divided by 2.
- * @arg TIM_ETRPRESCALER_DIV4: ETRP frequency divided by 4.
- * @arg TIM_ETRPRESCALER_DIV8: ETRP frequency divided by 8.
- * @param TIM_ExtTRGPolarity : The external Trigger Polarity.
- * This parameter can be one of the following values:
- * @arg TIM_ETRPOLARITY_INVERTED: active low or falling edge active.
- * @arg TIM_ETRPOLARITY_NONINVERTED: active high or rising edge active.
- * @param ExtTRGFilter : External Trigger Filter.
- * This parameter must be a value between 0x00 and 0x0F
- * @retval None
- */
-static void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler,
- uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter)
-{
- uint32_t tmpsmcr = 0;
-
- tmpsmcr = TIMx->SMCR;
-
- /* Reset the ETR Bits */
- tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
-
- /* Set the Prescaler, the Filter value and the Polarity */
- tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8)));
-
- /* Write to TIMx SMCR */
- TIMx->SMCR = tmpsmcr;
-}
-
-/**
- * @brief Enables or disables the TIM Capture Compare Channel x.
- * @param TIMx to select the TIM peripheral
- * @param Channel : specifies the TIM Channel
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1
- * @arg TIM_CHANNEL_2: TIM Channel 2
- * @arg TIM_CHANNEL_3: TIM Channel 3
- * @arg TIM_CHANNEL_4: TIM Channel 4
- * @param ChannelState : specifies the TIM Channel CCxE bit new state.
- * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_Disable.
- * @retval None
- */
-void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState)
-{
- uint32_t tmp = 0;
-
- /* Check the parameters */
- assert_param(IS_TIM_CC1_INSTANCE(TIMx));
- assert_param(IS_TIM_CHANNELS(Channel));
-
- tmp = TIM_CCER_CC1E << Channel;
-
- /* Reset the CCxE Bit */
- TIMx->CCER &= ~tmp;
-
- /* Set or reset the CCxE Bit */
- TIMx->CCER |= (uint32_t)(ChannelState << Channel);
-}
-
-/**
- * @}
- */
-
-#endif /* HAL_TIM_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c
deleted file mode 100644
index 75d4584..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c
+++ /dev/null
@@ -1,1857 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_tim_ex.c
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief TIM HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the Timer Extended peripheral:
- * + Time Hall Sensor Interface Initialization
- * + Time Hall Sensor Interface Start
- * + Time Complementary signal bread and dead time configuration
- * + Time Master and Slave synchronization configuration
- * + Timer remapping capabilities configuration
- @verbatim
- ==============================================================================
- ##### TIMER Extended features #####
- ==============================================================================
- [..]
- The Timer Extended features include:
- (#) Complementary outputs with programmable dead-time for :
- (++) Output Compare
- (++) PWM generation (Edge and Center-aligned Mode)
- (++) One-pulse mode output
- (#) Synchronization circuit to control the timer with external signals and to
- interconnect several timers together.
- (#) Break input to put the timer output signals in reset state or in a known state.
- (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for
- positioning purposes
-
- ##### How to use this driver #####
- ==============================================================================
- [..]
- (#) Initialize the TIM low level resources by implementing the following functions
- depending from feature used :
- (++) Complementary Output Compare : HAL_TIM_OC_MspInit()
- (++) Complementary PWM generation : HAL_TIM_PWM_MspInit()
- (++) Complementary One-pulse mode output : HAL_TIM_OnePulse_MspInit()
- (++) Hall Sensor output : HAL_TIMEx_HallSensor_MspInit()
-
- (#) Initialize the TIM low level resources :
- (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE();
- (##) TIM pins configuration
- (+++) Enable the clock for the TIM GPIOs using the following function:
- __HAL_RCC_GPIOx_CLK_ENABLE();
- (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
-
- (#) The external Clock can be configured, if needed (the default clock is the
- internal clock from the APBx), using the following function:
- HAL_TIM_ConfigClockSource, the clock configuration should be done before
- any start function.
-
- (#) Configure the TIM in the desired functioning mode using one of the
- initialization function of this driver:
- (++) HAL_TIMEx_HallSensor_Init and HAL_TIMEx_ConfigCommutationEvent: to use the
- Timer Hall Sensor Interface and the commutation event with the corresponding
- Interrupt and DMA request if needed (Note that One Timer is used to interface
- with the Hall sensor Interface and another Timer should be used to use
- the commutation event).
-
- (#) Activate the TIM peripheral using one of the start functions:
- (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), HAL_TIMEx_OCN_Start_IT()
- (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), HAL_TIMEx_PWMN_Start_IT()
- (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT()
- (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), HAL_TIMEx_HallSensor_Start_IT().
-
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
-*/
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @defgroup TIMEx TIMEx
- * @brief TIM Extended HAL module driver
- * @{
- */
-
-#ifdef HAL_TIM_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-
-#if defined (STM32F100xB) || defined (STM32F100xE) || \
- defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F103xE) || defined (STM32F103xG) || \
- defined (STM32F105xC) || defined (STM32F107xC)
-/** @defgroup TIMEx_Private_Functions TIMEx Private Functions
- * @{
- */
-static void TIM_CCxNChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelNState);
-/**
- * @}
- */
-#endif /* defined(STM32F100xB) || defined(STM32F100xE) || */
- /* defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || */
- /* defined(STM32F105xC) || defined(STM32F107xC) */
-
-/* Exported functions ---------------------------------------------------------*/
-
-/** @defgroup TIMEx_Exported_Functions TIMEx Exported Functions
- * @{
- */
-
-
-/** @defgroup TIMEx_Exported_Functions_Group1 Timer Hall Sensor functions
- * @brief Timer Hall Sensor functions
- *
-@verbatim
- ==============================================================================
- ##### Timer Hall Sensor functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Initialize and configure TIM HAL Sensor.
- (+) De-initialize TIM HAL Sensor.
- (+) Start the Hall Sensor Interface.
- (+) Stop the Hall Sensor Interface.
- (+) Start the Hall Sensor Interface and enable interrupts.
- (+) Stop the Hall Sensor Interface and disable interrupts.
- (+) Start the Hall Sensor Interface and enable DMA transfers.
- (+) Stop the Hall Sensor Interface and disable DMA transfers.
-
-@endverbatim
- * @{
- */
-/**
- * @brief Initializes the TIM Hall Sensor Interface and create the associated handle.
- * @param htim : TIM Encoder Interface handle
- * @param sConfig : TIM Hall Sensor configuration structure
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig)
-{
- TIM_OC_InitTypeDef OC_Config;
-
- /* Check the TIM handle allocation */
- if(htim == NULL)
- {
- return HAL_ERROR;
- }
-
- assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
- assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
- assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
- assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
- assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
- assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
-
- if(htim->State == HAL_TIM_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- htim->Lock = HAL_UNLOCKED;
-
- /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
- HAL_TIMEx_HallSensor_MspInit(htim);
- }
-
- /* Set the TIM state */
- htim->State= HAL_TIM_STATE_BUSY;
-
- /* Configure the Time base in the Encoder Mode */
- TIM_Base_SetConfig(htim->Instance, &htim->Init);
-
- /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */
- TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter);
-
- /* Reset the IC1PSC Bits */
- htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
- /* Set the IC1PSC value */
- htim->Instance->CCMR1 |= sConfig->IC1Prescaler;
-
- /* Enable the Hall sensor interface (XOR function of the three inputs) */
- htim->Instance->CR2 |= TIM_CR2_TI1S;
-
- /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */
- htim->Instance->SMCR &= ~TIM_SMCR_TS;
- htim->Instance->SMCR |= TIM_TS_TI1F_ED;
-
- /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */
- htim->Instance->SMCR &= ~TIM_SMCR_SMS;
- htim->Instance->SMCR |= TIM_SLAVEMODE_RESET;
-
- /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/
- OC_Config.OCFastMode = TIM_OCFAST_DISABLE;
- OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET;
- OC_Config.OCMode = TIM_OCMODE_PWM2;
- OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET;
- OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH;
- OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH;
- OC_Config.Pulse = sConfig->Commutation_Delay;
-
- TIM_OC2_SetConfig(htim->Instance, &OC_Config);
-
- /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2
- register to 101 */
- htim->Instance->CR2 &= ~TIM_CR2_MMS;
- htim->Instance->CR2 |= TIM_TRGO_OC2REF;
-
- /* Initialize the TIM state*/
- htim->State= HAL_TIM_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the TIM Hall Sensor interface
- * @param htim : TIM Hall Sensor handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- /* Disable the TIM Peripheral Clock */
- __HAL_TIM_DISABLE(htim);
-
- /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
- HAL_TIMEx_HallSensor_MspDeInit(htim);
-
- /* Change TIM state */
- htim->State = HAL_TIM_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the TIM Hall Sensor MSP.
- * @param htim : TIM handle
- * @retval None
- */
-__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(htim);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes TIM Hall Sensor MSP.
- * @param htim : TIM handle
- * @retval None
- */
-__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(htim);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @brief Starts the TIM Hall Sensor Interface.
- * @param htim : TIM Hall Sensor handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
-
- /* Enable the Input Capture channel 1
- (in the Hall Sensor Interface the 3 possible channels that are used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Hall sensor Interface.
- * @param htim : TIM Hall Sensor handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
-
- /* Disable the Input Capture channel 1
- (in the Hall Sensor Interface the 3 possible channels that are used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM Hall Sensor Interface in interrupt mode.
- * @param htim : TIM Hall Sensor handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
-
- /* Enable the capture compare Interrupts 1 event */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
-
- /* Enable the Input Capture channel 1
- (in the Hall Sensor Interface the 3 possible channels that are used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Hall Sensor Interface in interrupt mode.
- * @param htim : TIM handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
-
- /* Disable the Input Capture channel 1
- (in the Hall Sensor Interface the 3 possible channels that are used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
-
- /* Disable the capture compare Interrupts event */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM Hall Sensor Interface in DMA mode.
- * @param htim : TIM Hall Sensor handle
- * @param pData : The destination Buffer address.
- * @param Length : The length of data to be transferred from TIM peripheral to memory.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
-{
- /* Check the parameters */
- assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
-
- if((htim->State == HAL_TIM_STATE_BUSY))
- {
- return HAL_BUSY;
- }
- else if((htim->State == HAL_TIM_STATE_READY))
- {
- if(((uint32_t)pData == 0 ) && (Length > 0))
- {
- return HAL_ERROR;
- }
- else
- {
- htim->State = HAL_TIM_STATE_BUSY;
- }
- }
- /* Enable the Input Capture channel 1
- (in the Hall Sensor Interface the 3 possible channels that are used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
-
- /* Set the DMA Input Capture 1 Callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel for Capture 1*/
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length);
-
- /* Enable the capture compare 1 Interrupt */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Hall Sensor Interface in DMA mode.
- * @param htim : TIM handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
-
- /* Disable the Input Capture channel 1
- (in the Hall Sensor Interface the 3 possible channels that are used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
-
-
- /* Disable the capture compare Interrupts 1 event */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-#if defined (STM32F100xB) || defined (STM32F100xE) || \
- defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F103xE) || defined (STM32F103xG) || \
- defined (STM32F105xC) || defined (STM32F107xC)
-
-/** @defgroup TIMEx_Exported_Functions_Group2 Timer Complementary Output Compare functions
- * @brief Timer Complementary Output Compare functions
- *
-@verbatim
- ==============================================================================
- ##### Timer Complementary Output Compare functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Start the Complementary Output Compare/PWM.
- (+) Stop the Complementary Output Compare/PWM.
- (+) Start the Complementary Output Compare/PWM and enable interrupts.
- (+) Stop the Complementary Output Compare/PWM and disable interrupts.
- (+) Start the Complementary Output Compare/PWM and enable DMA transfers.
- (+) Stop the Complementary Output Compare/PWM and disable DMA transfers.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Starts the TIM Output Compare signal generation on the complementary
- * output.
- * @param htim : TIM Output Compare handle
- * @param Channel : TIM Channel to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
-
- /* Enable the Capture compare channel N */
- TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
-
- /* Enable the Main Ouput */
- __HAL_TIM_MOE_ENABLE(htim);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Output Compare signal generation on the complementary
- * output.
- * @param htim : TIM handle
- * @param Channel : TIM Channel to be disabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
-
- /* Disable the Capture compare channel N */
- TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
-
- /* Disable the Main Ouput */
- __HAL_TIM_MOE_DISABLE(htim);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM Output Compare signal generation in interrupt mode
- * on the complementary output.
- * @param htim : TIM OC handle
- * @param Channel : TIM Channel to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Enable the TIM Output Compare interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Enable the TIM Output Compare interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Enable the TIM Output Compare interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Enable the TIM Output Compare interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Enable the TIM Break interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK);
-
- /* Enable the Capture compare channel N */
- TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
-
- /* Enable the Main Ouput */
- __HAL_TIM_MOE_ENABLE(htim);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Output Compare signal generation in interrupt mode
- * on the complementary output.
- * @param htim : TIM Output Compare handle
- * @param Channel : TIM Channel to be disabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- uint32_t tmpccer = 0;
-
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Disable the TIM Output Compare interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Disable the TIM Output Compare interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Disable the TIM Output Compare interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Disable the TIM Output Compare interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Disable the Capture compare channel N */
- TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
-
- /* Disable the TIM Break interrupt (only if no more channel is active) */
- tmpccer = htim->Instance->CCER;
- if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == RESET)
- {
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK);
- }
-
- /* Disable the Main Ouput */
- __HAL_TIM_MOE_DISABLE(htim);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM Output Compare signal generation in DMA mode
- * on the complementary output.
- * @param htim : TIM Output Compare handle
- * @param Channel : TIM Channel to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @param pData : The source Buffer address.
- * @param Length : The length of data to be transferred from memory to TIM peripheral
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
-
- if((htim->State == HAL_TIM_STATE_BUSY))
- {
- return HAL_BUSY;
- }
- else if((htim->State == HAL_TIM_STATE_READY))
- {
- if(((uint32_t)pData == 0 ) && (Length > 0))
- {
- return HAL_ERROR;
- }
- else
- {
- htim->State = HAL_TIM_STATE_BUSY;
- }
- }
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
-
- /* Enable the TIM Output Compare DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
-
- /* Enable the TIM Output Compare DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
-{
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
-
- /* Enable the TIM Output Compare DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
-
- /* Enable the TIM Output Compare DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Enable the Capture compare channel N */
- TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
-
- /* Enable the Main Ouput */
- __HAL_TIM_MOE_ENABLE(htim);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Output Compare signal generation in DMA mode
- * on the complementary output.
- * @param htim : TIM Output Compare handle
- * @param Channel : TIM Channel to be disabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Disable the TIM Output Compare DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Disable the TIM Output Compare DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Disable the TIM Output Compare DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Disable the TIM Output Compare interrupt */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Disable the Capture compare channel N */
- TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
-
- /* Disable the Main Ouput */
- __HAL_TIM_MOE_DISABLE(htim);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Change the htim state */
- htim->State = HAL_TIM_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup TIMEx_Exported_Functions_Group3 Timer Complementary PWM functions
- * @brief Timer Complementary PWM functions
- *
-@verbatim
- ==============================================================================
- ##### Timer Complementary PWM functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Start the Complementary PWM.
- (+) Stop the Complementary PWM.
- (+) Start the Complementary PWM and enable interrupts.
- (+) Stop the Complementary PWM and disable interrupts.
- (+) Start the Complementary PWM and enable DMA transfers.
- (+) Stop the Complementary PWM and disable DMA transfers.
- (+) Start the Complementary Input Capture measurement.
- (+) Stop the Complementary Input Capture.
- (+) Start the Complementary Input Capture and enable interrupts.
- (+) Stop the Complementary Input Capture and disable interrupts.
- (+) Start the Complementary Input Capture and enable DMA transfers.
- (+) Stop the Complementary Input Capture and disable DMA transfers.
- (+) Start the Complementary One Pulse generation.
- (+) Stop the Complementary One Pulse.
- (+) Start the Complementary One Pulse and enable interrupts.
- (+) Stop the Complementary One Pulse and disable interrupts.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Starts the PWM signal generation on the complementary output.
- * @param htim : TIM handle
- * @param Channel : TIM Channel to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
-
- /* Enable the complementary PWM output */
- TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
-
- /* Enable the Main Ouput */
- __HAL_TIM_MOE_ENABLE(htim);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the PWM signal generation on the complementary output.
- * @param htim : TIM handle
- * @param Channel : TIM Channel to be disabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
-
- /* Disable the complementary PWM output */
- TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
-
- /* Disable the Main Ouput */
- __HAL_TIM_MOE_DISABLE(htim);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the PWM signal generation in interrupt mode on the
- * complementary output.
- * @param htim : TIM handle
- * @param Channel : TIM Channel to be disabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Enable the TIM Capture/Compare 1 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Enable the TIM Capture/Compare 2 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Enable the TIM Capture/Compare 3 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Enable the TIM Capture/Compare 4 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Enable the TIM Break interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK);
-
- /* Enable the complementary PWM output */
- TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
-
- /* Enable the Main Ouput */
- __HAL_TIM_MOE_ENABLE(htim);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the PWM signal generation in interrupt mode on the
- * complementary output.
- * @param htim : TIM handle
- * @param Channel : TIM Channel to be disabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- uint32_t tmpccer = 0;
-
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Disable the TIM Capture/Compare 1 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Disable the TIM Capture/Compare 2 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Disable the TIM Capture/Compare 3 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Disable the TIM Capture/Compare 3 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Disable the complementary PWM output */
- TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
-
- /* Disable the TIM Break interrupt (only if no more channel is active) */
- tmpccer = htim->Instance->CCER;
- if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == RESET)
- {
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK);
- }
-
- /* Disable the Main Ouput */
- __HAL_TIM_MOE_DISABLE(htim);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM PWM signal generation in DMA mode on the
- * complementary output
- * @param htim : TIM handle
- * @param Channel : TIM Channel to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @param pData : The source Buffer address.
- * @param Length : The length of data to be transferred from memory to TIM peripheral
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
-
- if((htim->State == HAL_TIM_STATE_BUSY))
- {
- return HAL_BUSY;
- }
- else if((htim->State == HAL_TIM_STATE_READY))
- {
- if(((uint32_t)pData == 0 ) && (Length > 0))
- {
- return HAL_ERROR;
- }
- else
- {
- htim->State = HAL_TIM_STATE_BUSY;
- }
- }
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
-
- /* Enable the TIM Capture/Compare 1 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
-
- /* Enable the TIM Capture/Compare 2 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
-
- /* Enable the TIM Capture/Compare 3 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
-
- /* Enable the TIM Capture/Compare 4 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Enable the complementary PWM output */
- TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
-
- /* Enable the Main Ouput */
- __HAL_TIM_MOE_ENABLE(htim);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM PWM signal generation in DMA mode on the complementary
- * output
- * @param htim : TIM handle
- * @param Channel : TIM Channel to be disabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Disable the TIM Capture/Compare 1 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Disable the TIM Capture/Compare 2 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Disable the TIM Capture/Compare 3 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Disable the TIM Capture/Compare 4 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Disable the complementary PWM output */
- TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
-
- /* Disable the Main Ouput */
- __HAL_TIM_MOE_DISABLE(htim);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Change the htim state */
- htim->State = HAL_TIM_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup TIMEx_Exported_Functions_Group4 Timer Complementary One Pulse functions
- * @brief Timer Complementary One Pulse functions
- *
-@verbatim
- ==============================================================================
- ##### Timer Complementary One Pulse functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Start the Complementary One Pulse generation.
- (+) Stop the Complementary One Pulse.
- (+) Start the Complementary One Pulse and enable interrupts.
- (+) Stop the Complementary One Pulse and disable interrupts.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Starts the TIM One Pulse signal generation on the complemetary
- * output.
- * @param htim : TIM One Pulse handle
- * @param OutputChannel : TIM Channel to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
- {
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
-
- /* Enable the complementary One Pulse output */
- TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
-
- /* Enable the Main Ouput */
- __HAL_TIM_MOE_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM One Pulse signal generation on the complementary
- * output.
- * @param htim : TIM One Pulse handle
- * @param OutputChannel : TIM Channel to be disabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
-{
-
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
-
- /* Disable the complementary One Pulse output */
- TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE);
-
- /* Disable the Main Ouput */
- __HAL_TIM_MOE_DISABLE(htim);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM One Pulse signal generation in interrupt mode on the
- * complementary channel.
- * @param htim : TIM One Pulse handle
- * @param OutputChannel : TIM Channel to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
-
- /* Enable the TIM Capture/Compare 1 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
-
- /* Enable the TIM Capture/Compare 2 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
-
- /* Enable the complementary One Pulse output */
- TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
-
- /* Enable the Main Ouput */
- __HAL_TIM_MOE_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
- }
-
-/**
- * @brief Stops the TIM One Pulse signal generation in interrupt mode on the
- * complementary channel.
- * @param htim : TIM One Pulse handle
- * @param OutputChannel : TIM Channel to be disabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
-
- /* Disable the TIM Capture/Compare 1 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
-
- /* Disable the TIM Capture/Compare 2 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
-
- /* Disable the complementary One Pulse output */
- TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE);
-
- /* Disable the Main Ouput */
- __HAL_TIM_MOE_DISABLE(htim);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-#endif /* defined(STM32F100xB) || defined(STM32F100xE) || */
- /* defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || */
- /* defined(STM32F105xC) || defined(STM32F107xC) */
-
-/** @defgroup TIMEx_Exported_Functions_Group5 Peripheral Control functions
- * @brief Peripheral Control functions
- *
-@verbatim
- ==============================================================================
- ##### Peripheral Control functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Configure the commutation event in case of use of the Hall sensor interface.
- (+) Configure Complementary channels, break features and dead time.
- (+) Configure Master synchronization.
-
-@endverbatim
- * @{
- */
-
-#if defined (STM32F100xB) || defined (STM32F100xE) || \
- defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F103xE) || defined (STM32F103xG) || \
- defined (STM32F105xC) || defined (STM32F107xC)
-
-/**
- * @brief Configure the TIM commutation event sequence.
- * @note: this function is mandatory to use the commutation event in order to
- * update the configuration at each commutation detection on the TRGI input of the Timer,
- * the typical use of this feature is with the use of another Timer(interface Timer)
- * configured in Hall sensor interface, this interface Timer will generate the
- * commutation at its TRGO output (connected to Timer used in this function) each time
- * the TI1 of the Interface Timer detect a commutation at its input TI1.
- * @param htim : TIM handle
- * @param InputTrigger : the Internal trigger corresponding to the Timer Interfacing with the Hall sensor
- * This parameter can be one of the following values:
- * @arg TIM_TS_ITR0: Internal trigger 0 selected
- * @arg TIM_TS_ITR1: Internal trigger 1 selected
- * @arg TIM_TS_ITR2: Internal trigger 2 selected
- * @arg TIM_TS_ITR3: Internal trigger 3 selected
- * @arg TIM_TS_NONE: No trigger is needed
- * @param CommutationSource : the Commutation Event source
- * This parameter can be one of the following values:
- * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
- * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
-{
- /* Check the parameters */
- assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance));
- assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
-
- __HAL_LOCK(htim);
-
- if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
- (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
- {
- /* Select the Input trigger */
- htim->Instance->SMCR &= ~TIM_SMCR_TS;
- htim->Instance->SMCR |= InputTrigger;
- }
-
- /* Select the Capture Compare preload feature */
- htim->Instance->CR2 |= TIM_CR2_CCPC;
- /* Select the Commutation event source */
- htim->Instance->CR2 &= ~TIM_CR2_CCUS;
- htim->Instance->CR2 |= CommutationSource;
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Configure the TIM commutation event sequence with interrupt.
- * @note: this function is mandatory to use the commutation event in order to
- * update the configuration at each commutation detection on the TRGI input of the Timer,
- * the typical use of this feature is with the use of another Timer(interface Timer)
- * configured in Hall sensor interface, this interface Timer will generate the
- * commutation at its TRGO output (connected to Timer used in this function) each time
- * the TI1 of the Interface Timer detect a commutation at its input TI1.
- * @param htim : TIM handle
- * @param InputTrigger : the Internal trigger corresponding to the Timer Interfacing with the Hall sensor
- * This parameter can be one of the following values:
- * @arg TIM_TS_ITR0: Internal trigger 0 selected
- * @arg TIM_TS_ITR1: Internal trigger 1 selected
- * @arg TIM_TS_ITR2: Internal trigger 2 selected
- * @arg TIM_TS_ITR3: Internal trigger 3 selected
- * @arg TIM_TS_NONE: No trigger is needed
- * @param CommutationSource : the Commutation Event source
- * This parameter can be one of the following values:
- * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
- * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
-{
- /* Check the parameters */
- assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance));
- assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
-
- __HAL_LOCK(htim);
-
- if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
- (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
- {
- /* Select the Input trigger */
- htim->Instance->SMCR &= ~TIM_SMCR_TS;
- htim->Instance->SMCR |= InputTrigger;
- }
-
- /* Select the Capture Compare preload feature */
- htim->Instance->CR2 |= TIM_CR2_CCPC;
- /* Select the Commutation event source */
- htim->Instance->CR2 &= ~TIM_CR2_CCUS;
- htim->Instance->CR2 |= CommutationSource;
-
- /* Enable the Commutation Interrupt Request */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM);
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Configure the TIM commutation event sequence with DMA.
- * @note: this function is mandatory to use the commutation event in order to
- * update the configuration at each commutation detection on the TRGI input of the Timer,
- * the typical use of this feature is with the use of another Timer(interface Timer)
- * configured in Hall sensor interface, this interface Timer will generate the
- * commutation at its TRGO output (connected to Timer used in this function) each time
- * the TI1 of the Interface Timer detect a commutation at its input TI1.
- * @note: The user should configure the DMA in his own software, in This function only the COMDE bit is set
- * @param htim : TIM handle
- * @param InputTrigger : the Internal trigger corresponding to the Timer Interfacing with the Hall sensor
- * This parameter can be one of the following values:
- * @arg TIM_TS_ITR0: Internal trigger 0 selected
- * @arg TIM_TS_ITR1: Internal trigger 1 selected
- * @arg TIM_TS_ITR2: Internal trigger 2 selected
- * @arg TIM_TS_ITR3: Internal trigger 3 selected
- * @arg TIM_TS_NONE: No trigger is needed
- * @param CommutationSource : the Commutation Event source
- * This parameter can be one of the following values:
- * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
- * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
-{
- /* Check the parameters */
- assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance));
- assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
-
- __HAL_LOCK(htim);
-
- if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
- (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
- {
- /* Select the Input trigger */
- htim->Instance->SMCR &= ~TIM_SMCR_TS;
- htim->Instance->SMCR |= InputTrigger;
- }
-
- /* Select the Capture Compare preload feature */
- htim->Instance->CR2 |= TIM_CR2_CCPC;
- /* Select the Commutation event source */
- htim->Instance->CR2 &= ~TIM_CR2_CCUS;
- htim->Instance->CR2 |= CommutationSource;
-
- /* Enable the Commutation DMA Request */
- /* Set the DMA Commutation Callback */
- htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError;
-
- /* Enable the Commutation DMA Request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM);
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State
- * and the AOE(automatic output enable).
- * @param htim : TIM handle
- * @param sBreakDeadTimeConfig : pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that
- * contains the BDTR Register configuration information for the TIM peripheral.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
- TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig)
-{
- /* Check the parameters */
- assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance));
- assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode));
- assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode));
- assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel));
- assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime));
- assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState));
- assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity));
- assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput));
-
- /* Process Locked */
- __HAL_LOCK(htim);
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State,
- the OSSI State, the dead time value and the Automatic Output Enable Bit */
- htim->Instance->BDTR = (uint32_t)sBreakDeadTimeConfig->OffStateRunMode |
- sBreakDeadTimeConfig->OffStateIDLEMode |
- sBreakDeadTimeConfig->LockLevel |
- sBreakDeadTimeConfig->DeadTime |
- sBreakDeadTimeConfig->BreakState |
- sBreakDeadTimeConfig->BreakPolarity |
- sBreakDeadTimeConfig->AutomaticOutput;
-
-
- htim->State = HAL_TIM_STATE_READY;
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-#endif /* defined(STM32F100xB) || defined(STM32F100xE) || */
- /* defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || */
- /* defined(STM32F105xC) || defined(STM32F107xC) */
-
-/**
- * @brief Configures the TIM in master mode.
- * @param htim : TIM handle.
- * @param sMasterConfig : pointer to a TIM_MasterConfigTypeDef structure that
- * contains the selected trigger output (TRGO) and the Master/Slave
- * mode.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig)
-{
- /* Check the parameters */
- assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance));
- assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger));
- assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode));
-
- __HAL_LOCK(htim);
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- /* Reset the MMS Bits */
- htim->Instance->CR2 &= ~TIM_CR2_MMS;
- /* Select the TRGO source */
- htim->Instance->CR2 |= sMasterConfig->MasterOutputTrigger;
-
- /* Reset the MSM Bit */
- htim->Instance->SMCR &= ~TIM_SMCR_MSM;
- /* Set or Reset the MSM Bit */
- htim->Instance->SMCR |= sMasterConfig->MasterSlaveMode;
-
- htim->State = HAL_TIM_STATE_READY;
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup TIMEx_Exported_Functions_Group6 Extension Callbacks functions
- * @brief Extension Callbacks functions
- *
-@verbatim
- ==============================================================================
- ##### Extension Callbacks functions #####
- ==============================================================================
- [..]
- This section provides Extension TIM callback functions:
- (+) Timer Commutation callback
- (+) Timer Break callback
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Hall commutation changed callback in non blocking mode
- * @param htim : TIM handle
- * @retval None
- */
-__weak void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(htim);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIMEx_CommutationCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Hall Break detection callback in non blocking mode
- * @param htim : TIM handle
- * @retval None
- */
-__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(htim);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIMEx_BreakCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief TIM DMA Commutation callback.
- * @param hdma : pointer to DMA handle.
- * @retval None
- */
-void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma)
-{
- TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- htim->State= HAL_TIM_STATE_READY;
-
- HAL_TIMEx_CommutationCallback(htim);
-}
-
-/**
- * @}
- */
-
-#if defined (STM32F100xB) || defined (STM32F100xE) || \
- defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F103xE) || defined (STM32F103xG) || \
- defined (STM32F105xC) || defined (STM32F107xC)
-
-/** @defgroup TIMEx_Exported_Functions_Group7 Extension Peripheral State functions
- * @brief Extension Peripheral State functions
- *
-@verbatim
- ==============================================================================
- ##### Extension Peripheral State functions #####
- ==============================================================================
- [..]
- This subsection permit to get in run-time the status of the peripheral
- and the data flow.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Return the TIM Hall Sensor interface state
- * @param htim : TIM Hall Sensor handle
- * @retval HAL state
- */
-HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim)
-{
- return htim->State;
-}
-
-/**
- * @}
- */
-#endif /* defined(STM32F100xB) || defined(STM32F100xE) || */
- /* defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || */
- /* defined(STM32F105xC) || defined(STM32F107xC) */
-
-/**
- * @}
- */
-
-#if defined (STM32F100xB) || defined (STM32F100xE) || \
- defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F103xE) || defined (STM32F103xG) || \
- defined (STM32F105xC) || defined (STM32F107xC)
-
-/** @addtogroup TIMEx_Private_Functions
- * @{
- */
-
-/**
- * @brief Enables or disables the TIM Capture Compare Channel xN.
- * @param TIMx to select the TIM peripheral
- * @param Channel : specifies the TIM Channel
- * This parameter can be one of the following values:
- * @arg TIM_Channel_1: TIM Channel 1
- * @arg TIM_Channel_2: TIM Channel 2
- * @arg TIM_Channel_3: TIM Channel 3
- * @param ChannelNState : specifies the TIM Channel CCxNE bit new state.
- * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable.
- * @retval None
- */
-static void TIM_CCxNChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelNState)
-{
- uint32_t tmp = 0;
-
- tmp = TIM_CCER_CC1NE << Channel;
-
- /* Reset the CCxNE Bit */
- TIMx->CCER &= ~tmp;
-
- /* Set or reset the CCxNE Bit */
- TIMx->CCER |= (uint32_t)(ChannelNState << Channel);
-}
-
-/**
- * @}
- */
-
-#endif /* defined(STM32F100xB) || defined(STM32F100xE) || */
- /* defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || */
- /* defined(STM32F105xC) || defined(STM32F107xC) */
-
-#endif /* HAL_TIM_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c
deleted file mode 100644
index 8f06df7..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c
+++ /dev/null
@@ -1,1921 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_uart.c
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief UART HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the Universal Asynchronous Receiver Transmitter (UART) peripheral:
- * + Initialization and de-initialization functions
- * + IO operation functions
- * + Peripheral Control functions
- * + Peripheral State and Errors functions
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- The UART HAL driver can be used as follows:
-
- (#) Declare a UART_HandleTypeDef handle structure.
-
- (#) Initialize the UART low level resources by implementing the HAL_UART_MspInit() API:
- (##) Enable the USARTx interface clock.
- (##) UART pins configuration:
- (+++) Enable the clock for the UART GPIOs.
- (+++) Configure the USART pins (TX as alternate function pull-up, RX as alternate function Input).
- (##) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT()
- and HAL_UART_Receive_IT() APIs):
- (+++) Configure the USARTx interrupt priority.
- (+++) Enable the NVIC USART IRQ handle.
- (##) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA()
- and HAL_UART_Receive_DMA() APIs):
- (+++) Declare a DMA handle structure for the Tx/Rx channel.
- (+++) Enable the DMAx interface clock.
- (+++) Configure the declared DMA handle structure with the required
- Tx/Rx parameters.
- (+++) Configure the DMA Tx/Rx channel.
- (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle.
- (+++) Configure the priority and enable the NVIC for the transfer complete
- interrupt on the DMA Tx/Rx channel.
- (+++) Configure the USARTx interrupt priority and enable the NVIC USART IRQ handle
- (used for last byte sending completion detection in DMA non circular mode)
-
- (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Hardware
- flow control and Mode(Receiver/Transmitter) in the huart Init structure.
-
- (#) For the UART asynchronous mode, initialize the UART registers by calling
- the HAL_UART_Init() API.
-
- (#) For the UART Half duplex mode, initialize the UART registers by calling
- the HAL_HalfDuplex_Init() API.
-
- (#) For the LIN mode, initialize the UART registers by calling the HAL_LIN_Init() API.
-
- (#) For the Multi-Processor mode, initialize the UART registers by calling
- the HAL_MultiProcessor_Init() API.
-
- [..]
- (@) The specific UART interrupts (Transmission complete interrupt,
- RXNE interrupt and Error Interrupts) will be managed using the macros
- __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() inside the transmit
- and receive process.
-
- [..]
- (@) These APIs (HAL_UART_Init() and HAL_HalfDuplex_Init()) configure also the
- low level Hardware GPIO, CLOCK, CORTEX...etc) by calling the customed
- HAL_UART_MspInit() API.
-
- [..]
- Three operation modes are available within this driver :
-
- *** Polling mode IO operation ***
- =================================
- [..]
- (+) Send an amount of data in blocking mode using HAL_UART_Transmit()
- (+) Receive an amount of data in blocking mode using HAL_UART_Receive()
-
- *** Interrupt mode IO operation ***
- ===================================
- [..]
- (+) Send an amount of data in non blocking mode using HAL_UART_Transmit_IT()
- (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_UART_TxCpltCallback
- (+) Receive an amount of data in non blocking mode using HAL_UART_Receive_IT()
- (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_UART_RxCpltCallback
- (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_UART_ErrorCallback
-
- *** DMA mode IO operation ***
- ==============================
- [..]
- (+) Send an amount of data in non blocking mode (DMA) using HAL_UART_Transmit_DMA()
- (+) At transmission end of half transfer HAL_UART_TxHalfCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_UART_TxHalfCpltCallback
- (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_UART_TxCpltCallback
- (+) Receive an amount of data in non blocking mode (DMA) using HAL_UART_Receive_DMA()
- (+) At reception end of half transfer HAL_UART_RxHalfCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_UART_RxHalfCpltCallback
- (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_UART_RxCpltCallback
- (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_UART_ErrorCallback
- (+) Pause the DMA Transfer using HAL_UART_DMAPause()
- (+) Resume the DMA Transfer using HAL_UART_DMAResume()
- (+) Stop the DMA Transfer using HAL_UART_DMAStop()
-
- *** UART HAL driver macros list ***
- =============================================
- [..]
- Below the list of most used macros in UART HAL driver.
-
- (+) __HAL_UART_ENABLE: Enable the UART peripheral
- (+) __HAL_UART_DISABLE: Disable the UART peripheral
- (+) __HAL_UART_GET_FLAG : Check whether the specified UART flag is set or not
- (+) __HAL_UART_CLEAR_FLAG : Clear the specified UART pending flag
- (+) __HAL_UART_ENABLE_IT: Enable the specified UART interrupt
- (+) __HAL_UART_DISABLE_IT: Disable the specified UART interrupt
- (+) __HAL_UART_GET_IT_SOURCE: Check whether the specified UART interrupt has occurred or not
-
- [..]
- (@) You can refer to the UART HAL driver header file for more useful macros
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @defgroup UART UART
- * @brief HAL UART module driver
- * @{
- */
-#ifdef HAL_UART_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macros ------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/** @addtogroup UART_Private_Functions UART Private Functions
- * @{
- */
-static void UART_SetConfig (UART_HandleTypeDef *huart);
-static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart);
-static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart);
-static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart);
-static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma);
-static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
-static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
-static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
-static void UART_DMAError(DMA_HandleTypeDef *hdma);
-static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
-/**
- * @}
- */
-
-/* Exported functions ---------------------------------------------------------*/
-
-/** @defgroup UART_Exported_Functions UART Exported Functions
- * @{
- */
-
-/** @defgroup UART_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
-===============================================================================
- ##### Initialization and Configuration functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to initialize the USARTx or the UARTy
- in asynchronous mode.
- (+) For the asynchronous mode only these parameters can be configured:
- (++) Baud Rate
- (++) Word Length
- (++) Stop Bit
- (++) Parity
- (++) Hardware flow control
- (++) Receiver/transmitter modes
- [..]
- The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init() and HAL_MultiProcessor_Init() APIs
- follow respectively the UART asynchronous, UART Half duplex, LIN and Multi-Processor
- configuration procedures (details for the procedures are available in reference manuals
- (RM0008 for STM32F10Xxx MCUs and RM0041 for STM32F100xx MCUs)).
-
-
-@endverbatim
- * @{
- */
-
-/*
- Additionnal remark: If the parity is enabled, then the MSB bit of the data written
- in the data register is transmitted but is changed by the parity bit.
- Depending on the frame length defined by the M bit (8-bits or 9-bits),
- the possible UART frame formats are as listed in the following table:
- +-------------------------------------------------------------+
- | M bit | PCE bit | UART frame |
- |---------------------|---------------------------------------|
- | 0 | 0 | | SB | 8 bit data | STB | |
- |---------|-----------|---------------------------------------|
- | 0 | 1 | | SB | 7 bit data | PB | STB | |
- |---------|-----------|---------------------------------------|
- | 1 | 0 | | SB | 9 bit data | STB | |
- |---------|-----------|---------------------------------------|
- | 1 | 1 | | SB | 8 bit data | PB | STB | |
- +-------------------------------------------------------------+
-*/
-
-/**
- * @brief Initializes the UART mode according to the specified parameters in
- * the UART_InitTypeDef and create the associated handle.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart)
-{
- /* Check the UART handle allocation */
- if(huart == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- if(huart->Init.HwFlowCtl != UART_HWCONTROL_NONE)
- {
- /* The hardware flow control is available only for USART1, USART2, USART3 */
- assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance));
- assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl));
- }
- else
- {
- assert_param(IS_UART_INSTANCE(huart->Instance));
- }
- assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength));
- assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling));
-
- if(huart->State == HAL_UART_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- huart->Lock = HAL_UNLOCKED;
-
- /* Init the low level hardware */
- HAL_UART_MspInit(huart);
- }
-
- huart->State = HAL_UART_STATE_BUSY;
-
- /* Disable the peripheral */
- __HAL_UART_DISABLE(huart);
-
- /* Set the UART Communication parameters */
- UART_SetConfig(huart);
-
- /* In asynchronous mode, the following bits must be kept cleared:
- - LINEN and CLKEN bits in the USART_CR2 register,
- - SCEN, HDSEL and IREN bits in the USART_CR3 register.*/
- CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
- CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN));
-
- /* Enable the peripheral */
- __HAL_UART_ENABLE(huart);
-
- /* Initialize the UART state */
- huart->ErrorCode = HAL_UART_ERROR_NONE;
- huart->State= HAL_UART_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the half-duplex mode according to the specified
- * parameters in the UART_InitTypeDef and create the associated handle.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart)
-{
- /* Check the UART handle allocation */
- if(huart == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check UART instance */
- assert_param(IS_UART_HALFDUPLEX_INSTANCE(huart->Instance));
- assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength));
- assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling));
-
- if(huart->State == HAL_UART_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- huart->Lock = HAL_UNLOCKED;
-
- /* Init the low level hardware */
- HAL_UART_MspInit(huart);
- }
-
- huart->State = HAL_UART_STATE_BUSY;
-
- /* Disable the peripheral */
- __HAL_UART_DISABLE(huart);
-
- /* Set the UART Communication parameters */
- UART_SetConfig(huart);
-
- /* In half-duplex mode, the following bits must be kept cleared:
- - LINEN and CLKEN bits in the USART_CR2 register,
- - SCEN and IREN bits in the USART_CR3 register.*/
- CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
- CLEAR_BIT(huart->Instance->CR3, (USART_CR3_IREN | USART_CR3_SCEN));
-
- /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */
- SET_BIT(huart->Instance->CR3, USART_CR3_HDSEL);
-
- /* Enable the peripheral */
- __HAL_UART_ENABLE(huart);
-
- /* Initialize the UART state*/
- huart->ErrorCode = HAL_UART_ERROR_NONE;
- huart->State= HAL_UART_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the LIN mode according to the specified
- * parameters in the UART_InitTypeDef and create the associated handle.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @param BreakDetectLength: Specifies the LIN break detection length.
- * This parameter can be one of the following values:
- * @arg UART_LINBREAKDETECTLENGTH_10B: 10-bit break detection
- * @arg UART_LINBREAKDETECTLENGTH_11B: 11-bit break detection
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength)
-{
- /* Check the UART handle allocation */
- if(huart == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the LIN UART instance */
- assert_param(IS_UART_LIN_INSTANCE(huart->Instance));
- /* Check the Break detection length parameter */
- assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength));
- assert_param(IS_UART_LIN_WORD_LENGTH(huart->Init.WordLength));
- assert_param(IS_UART_LIN_OVERSAMPLING(huart->Init.OverSampling));
-
- if(huart->State == HAL_UART_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- huart->Lock = HAL_UNLOCKED;
-
- /* Init the low level hardware */
- HAL_UART_MspInit(huart);
- }
-
- huart->State = HAL_UART_STATE_BUSY;
-
- /* Disable the peripheral */
- __HAL_UART_DISABLE(huart);
-
- /* Set the UART Communication parameters */
- UART_SetConfig(huart);
-
- /* In LIN mode, the following bits must be kept cleared:
- - CLKEN bits in the USART_CR2 register,
- - SCEN and IREN bits in the USART_CR3 register.*/
- CLEAR_BIT(huart->Instance->CR2, USART_CR2_CLKEN);
- CLEAR_BIT(huart->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN));
-
- /* Enable the LIN mode by setting the LINEN bit in the CR2 register */
- SET_BIT(huart->Instance->CR2, USART_CR2_LINEN);
-
- /* Set the USART LIN Break detection length. */
- MODIFY_REG(huart->Instance->CR2, USART_CR2_LBDL, BreakDetectLength);
-
- /* Enable the peripheral */
- __HAL_UART_ENABLE(huart);
-
- /* Initialize the UART state*/
- huart->ErrorCode = HAL_UART_ERROR_NONE;
- huart->State= HAL_UART_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the Multi-Processor mode according to the specified
- * parameters in the UART_InitTypeDef and create the associated handle.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @param Address: UART node address
- * @param WakeUpMethod: specifies the UART wakeup method.
- * This parameter can be one of the following values:
- * @arg UART_WAKEUPMETHOD_IDLELINE: Wakeup by an idle line detection
- * @arg UART_WAKEUPMETHOD_ADDRESSMARK: Wakeup by an address mark
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod)
-{
- /* Check the UART handle allocation */
- if(huart == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check UART instance capabilities */
- assert_param(IS_UART_MULTIPROCESSOR_INSTANCE(huart->Instance));
-
- /* Check the Address & wake up method parameters */
- assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod));
- assert_param(IS_UART_ADDRESS(Address));
- assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength));
- assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling));
-
- if(huart->State == HAL_UART_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- huart->Lock = HAL_UNLOCKED;
-
- /* Init the low level hardware */
- HAL_UART_MspInit(huart);
- }
-
- huart->State = HAL_UART_STATE_BUSY;
-
- /* Disable the peripheral */
- __HAL_UART_DISABLE(huart);
-
- /* Set the UART Communication parameters */
- UART_SetConfig(huart);
-
- /* In Multi-Processor mode, the following bits must be kept cleared:
- - LINEN and CLKEN bits in the USART_CR2 register,
- - SCEN, HDSEL and IREN bits in the USART_CR3 register */
- CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
- CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN));
-
- /* Set the USART address node */
- MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, Address);
-
- /* Set the wake up method by setting the WAKE bit in the CR1 register */
- MODIFY_REG(huart->Instance->CR1, USART_CR1_WAKE, WakeUpMethod);
-
- /* Enable the peripheral */
- __HAL_UART_ENABLE(huart);
-
- /* Initialize the UART state */
- huart->ErrorCode = HAL_UART_ERROR_NONE;
- huart->State= HAL_UART_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the UART peripheral.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart)
-{
- /* Check the UART handle allocation */
- if(huart == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_UART_INSTANCE(huart->Instance));
-
- huart->State = HAL_UART_STATE_BUSY;
-
- /* Disable the Peripheral */
- __HAL_UART_DISABLE(huart);
-
- huart->Instance->CR1 = 0x0;
- huart->Instance->CR2 = 0x0;
- huart->Instance->CR3 = 0x0;
-
- /* DeInit the low level hardware */
- HAL_UART_MspDeInit(huart);
-
- huart->ErrorCode = HAL_UART_ERROR_NONE;
- huart->State = HAL_UART_STATE_RESET;
-
- /* Process Unlock */
- __HAL_UNLOCK(huart);
-
- return HAL_OK;
-}
-
-/**
- * @brief UART MSP Init.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval None
- */
- __weak void HAL_UART_MspInit(UART_HandleTypeDef *huart)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(huart);
- /* NOTE: This function should not be modified, when the callback is needed,
- the HAL_UART_MspInit can be implemented in the user file
- */
-}
-
-/**
- * @brief UART MSP DeInit.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval None
- */
- __weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(huart);
- /* NOTE: This function should not be modified, when the callback is needed,
- the HAL_UART_MspDeInit can be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup UART_Exported_Functions_Group2 IO operation functions
- * @brief UART Transmit and Receive functions
- *
-@verbatim
- ==============================================================================
- ##### IO operation functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to manage the UART asynchronous
- and Half duplex data transfers.
-
- (#) There are two modes of transfer:
- (++) Blocking mode: The communication is performed in polling mode.
- The HAL status of all data processing is returned by the same function
- after finishing transfer.
- (++) Non blocking mode: The communication is performed using Interrupts
- or DMA, these APIs return the HAL status.
- The end of the data processing will be indicated through the
- dedicated UART IRQ when using Interrupt mode or the DMA IRQ when
- using DMA mode.
- The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks
- will be executed respectively at the end of the transmit or receive process.
- The HAL_UART_ErrorCallback() user callback will be executed when
- a communication error is detected.
-
- (#) Blocking mode APIs are:
- (++) HAL_UART_Transmit()
- (++) HAL_UART_Receive()
-
- (#) Non Blocking mode APIs with Interrupt are:
- (++) HAL_UART_Transmit_IT()
- (++) HAL_UART_Receive_IT()
- (++) HAL_UART_IRQHandler()
-
- (#) Non Blocking mode functions with DMA are:
- (++) HAL_UART_Transmit_DMA()
- (++) HAL_UART_Receive_DMA()
- (++) HAL_UART_DMAPause()
- (++) HAL_UART_DMAResume()
- (++) HAL_UART_DMAStop()
-
- (#) A set of Transfer Complete Callbacks are provided in non blocking mode:
- (++) HAL_UART_TxHalfCpltCallback()
- (++) HAL_UART_TxCpltCallback()
- (++) HAL_UART_RxHalfCpltCallback()
- (++) HAL_UART_RxCpltCallback()
- (++) HAL_UART_ErrorCallback()
-
- [..]
- (@) In the Half duplex communication, it is forbidden to run the transmit
- and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX
- can't be useful.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Sends an amount of data in blocking mode.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout)
-{
- uint16_t* tmp;
- uint32_t tmp_state = 0;
-
- tmp_state = huart->State;
- if((tmp_state == HAL_UART_STATE_READY) || (tmp_state == HAL_UART_STATE_BUSY_RX))
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(huart);
-
- huart->ErrorCode = HAL_UART_ERROR_NONE;
- /* Check if a non-blocking receive process is ongoing or not */
- if(huart->State == HAL_UART_STATE_BUSY_RX)
- {
- huart->State = HAL_UART_STATE_BUSY_TX_RX;
- }
- else
- {
- huart->State = HAL_UART_STATE_BUSY_TX;
- }
-
- huart->TxXferSize = Size;
- huart->TxXferCount = Size;
- while(huart->TxXferCount > 0)
- {
- huart->TxXferCount--;
- if(huart->Init.WordLength == UART_WORDLENGTH_9B)
- {
- if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- tmp = (uint16_t*) pData;
- huart->Instance->DR = (*tmp & (uint16_t)0x01FF);
- if(huart->Init.Parity == UART_PARITY_NONE)
- {
- pData +=2;
- }
- else
- {
- pData +=1;
- }
- }
- else
- {
- if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- huart->Instance->DR = (*pData++ & (uint8_t)0xFF);
- }
- }
-
- if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Check if a non-blocking receive process is ongoing or not */
- if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
- {
- huart->State = HAL_UART_STATE_BUSY_RX;
- }
- else
- {
- huart->State = HAL_UART_STATE_READY;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receives an amount of data in blocking mode.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be received
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout)
-{
- uint16_t* tmp;
- uint32_t tmp_state = 0;
-
- tmp_state = huart->State;
- if((tmp_state == HAL_UART_STATE_READY) || (tmp_state == HAL_UART_STATE_BUSY_TX))
- {
- if((pData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(huart);
-
- huart->ErrorCode = HAL_UART_ERROR_NONE;
- /* Check if a non-blocking transmit process is ongoing or not */
- if(huart->State == HAL_UART_STATE_BUSY_TX)
- {
- huart->State = HAL_UART_STATE_BUSY_TX_RX;
- }
- else
- {
- huart->State = HAL_UART_STATE_BUSY_RX;
- }
-
- huart->RxXferSize = Size;
- huart->RxXferCount = Size;
-
- /* Check the remain data to be received */
- while(huart->RxXferCount > 0)
- {
- huart->RxXferCount--;
- if(huart->Init.WordLength == UART_WORDLENGTH_9B)
- {
- if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- tmp = (uint16_t*) pData ;
- if(huart->Init.Parity == UART_PARITY_NONE)
- {
- *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x01FF);
- pData +=2;
- }
- else
- {
- *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x00FF);
- pData +=1;
- }
-
- }
- else
- {
- if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- if(huart->Init.Parity == UART_PARITY_NONE)
- {
- *pData++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x00FF);
- }
- else
- {
- *pData++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x007F);
- }
-
- }
- }
-
- /* Check if a non-blocking transmit process is ongoing or not */
- if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
- {
- huart->State = HAL_UART_STATE_BUSY_TX;
- }
- else
- {
- huart->State = HAL_UART_STATE_READY;
- }
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Sends an amount of data in non blocking mode.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
-{
- uint32_t tmp_state = 0;
-
- tmp_state = huart->State;
- if((tmp_state == HAL_UART_STATE_READY) || (tmp_state == HAL_UART_STATE_BUSY_RX))
- {
- if((pData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(huart);
-
- huart->pTxBuffPtr = pData;
- huart->TxXferSize = Size;
- huart->TxXferCount = Size;
-
- huart->ErrorCode = HAL_UART_ERROR_NONE;
- /* Check if a receive process is ongoing or not */
- if(huart->State == HAL_UART_STATE_BUSY_RX)
- {
- huart->State = HAL_UART_STATE_BUSY_TX_RX;
- }
- else
- {
- huart->State = HAL_UART_STATE_BUSY_TX;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- /* Enable the UART Transmit data register empty Interrupt */
- __HAL_UART_ENABLE_IT(huart, UART_IT_TXE);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receives an amount of data in non blocking mode
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be received
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
-{
- uint32_t tmp_state = 0;
-
- tmp_state = huart->State;
- if((tmp_state == HAL_UART_STATE_READY) || (tmp_state == HAL_UART_STATE_BUSY_TX))
- {
- if((pData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(huart);
-
- huart->pRxBuffPtr = pData;
- huart->RxXferSize = Size;
- huart->RxXferCount = Size;
-
- huart->ErrorCode = HAL_UART_ERROR_NONE;
- /* Check if a transmit process is ongoing or not */
- if(huart->State == HAL_UART_STATE_BUSY_TX)
- {
- huart->State = HAL_UART_STATE_BUSY_TX_RX;
- }
- else
- {
- huart->State = HAL_UART_STATE_BUSY_RX;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- /* Enable the UART Parity Error Interrupt */
- __HAL_UART_ENABLE_IT(huart, UART_IT_PE);
-
- /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
- __HAL_UART_ENABLE_IT(huart, UART_IT_ERR);
-
- /* Enable the UART Data Register not empty Interrupt */
- __HAL_UART_ENABLE_IT(huart, UART_IT_RXNE);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Sends an amount of data in non blocking mode.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
-{
- uint32_t *tmp;
- uint32_t tmp_state = 0;
-
- tmp_state = huart->State;
- if((tmp_state == HAL_UART_STATE_READY) || (tmp_state == HAL_UART_STATE_BUSY_RX))
- {
- if((pData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(huart);
-
- huart->pTxBuffPtr = pData;
- huart->TxXferSize = Size;
- huart->TxXferCount = Size;
-
- huart->ErrorCode = HAL_UART_ERROR_NONE;
- /* Check if a receive process is ongoing or not */
- if(huart->State == HAL_UART_STATE_BUSY_RX)
- {
- huart->State = HAL_UART_STATE_BUSY_TX_RX;
- }
- else
- {
- huart->State = HAL_UART_STATE_BUSY_TX;
- }
-
- /* Set the UART DMA transfer complete callback */
- huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt;
-
- /* Set the UART DMA Half transfer complete callback */
- huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt;
-
- /* Set the DMA error callback */
- huart->hdmatx->XferErrorCallback = UART_DMAError;
-
- /* Enable the UART transmit DMA channel */
- tmp = (uint32_t*)&pData;
- HAL_DMA_Start_IT(huart->hdmatx, *(uint32_t*)tmp, (uint32_t)&huart->Instance->DR, Size);
-
- /* Clear the TC flag in the SR register by writing 0 to it */
- __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_TC);
-
- /* Enable the DMA transfer for transmit request by setting the DMAT bit
- in the UART CR3 register */
- SET_BIT(huart->Instance->CR3, USART_CR3_DMAT);
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receives an amount of data in non blocking mode.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be received
- * @note When the UART parity is enabled (PCE = 1), the received data contain
- * the parity bit (MSB position)
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
-{
- uint32_t *tmp;
- uint32_t tmp_state = 0;
-
- tmp_state = huart->State;
- if((tmp_state == HAL_UART_STATE_READY) || (tmp_state == HAL_UART_STATE_BUSY_TX))
- {
- if((pData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(huart);
-
- huart->pRxBuffPtr = pData;
- huart->RxXferSize = Size;
-
- huart->ErrorCode = HAL_UART_ERROR_NONE;
- /* Check if a transmit process is ongoing or not */
- if(huart->State == HAL_UART_STATE_BUSY_TX)
- {
- huart->State = HAL_UART_STATE_BUSY_TX_RX;
- }
- else
- {
- huart->State = HAL_UART_STATE_BUSY_RX;
- }
-
- /* Set the UART DMA transfer complete callback */
- huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt;
-
- /* Set the UART DMA Half transfer complete callback */
- huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt;
-
- /* Set the DMA error callback */
- huart->hdmarx->XferErrorCallback = UART_DMAError;
-
- /* Enable the DMA channel */
- tmp = (uint32_t*)&pData;
- HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->DR, *(uint32_t*)tmp, Size);
-
- /* Enable the DMA transfer for the receiver request by setting the DMAR bit
- in the UART CR3 register */
- SET_BIT(huart->Instance->CR3, USART_CR3_DMAR);
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Pauses the DMA Transfer.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart)
-{
- /* Process Locked */
- __HAL_LOCK(huart);
-
- if(huart->State == HAL_UART_STATE_BUSY_TX)
- {
- /* Disable the UART DMA Tx request */
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT);
- }
- else if(huart->State == HAL_UART_STATE_BUSY_RX)
- {
- /* Disable the UART DMA Rx request */
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
- }
- else if (huart->State == HAL_UART_STATE_BUSY_TX_RX)
- {
- /* Disable the UART DMA Tx & Rx requests */
- CLEAR_BIT(huart->Instance->CR3, (USART_CR3_DMAT | USART_CR3_DMAR));
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_ERROR;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_OK;
-}
-
-/**
- * @brief Resumes the DMA Transfer.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart)
-{
- /* Process Locked */
- __HAL_LOCK(huart);
-
- if(huart->State == HAL_UART_STATE_BUSY_TX)
- {
- /* Enable the UART DMA Tx request */
- SET_BIT(huart->Instance->CR3, USART_CR3_DMAT);
- }
- else if(huart->State == HAL_UART_STATE_BUSY_RX)
- {
- /* Clear the Overrun flag before resumming the Rx transfer*/
- __HAL_UART_CLEAR_OREFLAG(huart);
- /* Enable the UART DMA Rx request */
- SET_BIT(huart->Instance->CR3, USART_CR3_DMAR);
- }
- else if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
- {
- /* Clear the Overrun flag before resumming the Rx transfer*/
- __HAL_UART_CLEAR_OREFLAG(huart);
- /* Enable the UART DMA Tx & Rx request */
- SET_BIT(huart->Instance->CR3, (USART_CR3_DMAT | USART_CR3_DMAR));
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_ERROR;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_OK;
-}
-
-/**
- * @brief Stops the DMA Transfer.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart)
-{
- /* The Lock is not implemented on this API to allow the user application
- to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback():
- when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated
- and the correspond call back is executed HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback()
- */
-
- /* Disable the UART Tx/Rx DMA requests */
- CLEAR_BIT(huart->Instance->CR3, (USART_CR3_DMAT | USART_CR3_DMAR));
-
- /* Abort the UART DMA tx channel */
- if(huart->hdmatx != NULL)
- {
- HAL_DMA_Abort(huart->hdmatx);
- }
- /* Abort the UART DMA rx channel */
- if(huart->hdmarx != NULL)
- {
- HAL_DMA_Abort(huart->hdmarx);
- }
-
- huart->State = HAL_UART_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief This function handles UART interrupt request.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval None
- */
-void HAL_UART_IRQHandler(UART_HandleTypeDef *huart)
-{
- uint32_t tmp_flag = 0, tmp_it_source = 0;
-
- tmp_flag = __HAL_UART_GET_FLAG(huart, UART_FLAG_PE);
- tmp_it_source = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_PE);
- /* UART parity error interrupt occurred ------------------------------------*/
- if((tmp_flag != RESET) && (tmp_it_source != RESET))
- {
- huart->ErrorCode |= HAL_UART_ERROR_PE;
- }
-
- tmp_flag = __HAL_UART_GET_FLAG(huart, UART_FLAG_FE);
- tmp_it_source = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_ERR);
- /* UART frame error interrupt occurred -------------------------------------*/
- if((tmp_flag != RESET) && (tmp_it_source != RESET))
- {
- huart->ErrorCode |= HAL_UART_ERROR_FE;
- }
-
- tmp_flag = __HAL_UART_GET_FLAG(huart, UART_FLAG_NE);
- /* UART noise error interrupt occurred -------------------------------------*/
- if((tmp_flag != RESET) && (tmp_it_source != RESET))
- {
- huart->ErrorCode |= HAL_UART_ERROR_NE;
- }
-
- tmp_flag = __HAL_UART_GET_FLAG(huart, UART_FLAG_ORE);
- /* UART Over-Run interrupt occurred ----------------------------------------*/
- if((tmp_flag != RESET) && (tmp_it_source != RESET))
- {
- huart->ErrorCode |= HAL_UART_ERROR_ORE;
- }
-
- tmp_flag = __HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE);
- tmp_it_source = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_RXNE);
- /* UART in mode Receiver ---------------------------------------------------*/
- if((tmp_flag != RESET) && (tmp_it_source != RESET))
- {
- UART_Receive_IT(huart);
- }
-
- tmp_flag = __HAL_UART_GET_FLAG(huart, UART_FLAG_TXE);
- tmp_it_source = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_TXE);
- /* UART in mode Transmitter ------------------------------------------------*/
- if((tmp_flag != RESET) && (tmp_it_source != RESET))
- {
- UART_Transmit_IT(huart);
- }
-
- tmp_flag = __HAL_UART_GET_FLAG(huart, UART_FLAG_TC);
- tmp_it_source = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_TC);
- /* UART in mode Transmitter end --------------------------------------------*/
- if((tmp_flag != RESET) && (tmp_it_source != RESET))
- {
- UART_EndTransmit_IT(huart);
- }
-
- if(huart->ErrorCode != HAL_UART_ERROR_NONE)
- {
- /* Clear all the error flag at once */
- __HAL_UART_CLEAR_PEFLAG(huart);
-
- /* Set the UART state ready to be able to start again the process */
- huart->State = HAL_UART_STATE_READY;
-
- HAL_UART_ErrorCallback(huart);
- }
-}
-
-/**
- * @brief Tx Transfer completed callbacks.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval None
- */
- __weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(huart);
- /* NOTE: This function should not be modified, when the callback is needed,
- the HAL_UART_TxCpltCallback can be implemented in the user file
- */
-}
-
-/**
- * @brief Tx Half Transfer completed callbacks.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval None
- */
- __weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(huart);
- /* NOTE: This function should not be modified, when the callback is needed,
- the HAL_UART_TxHalfCpltCallback can be implemented in the user file
- */
-}
-
-/**
- * @brief Rx Transfer completed callbacks.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval None
- */
-__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(huart);
- /* NOTE: This function should not be modified, when the callback is needed,
- the HAL_UART_RxCpltCallback can be implemented in the user file
- */
-}
-
-/**
- * @brief Rx Half Transfer completed callbacks.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval None
- */
-__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(huart);
- /* NOTE: This function should not be modified, when the callback is needed,
- the HAL_UART_RxHalfCpltCallback can be implemented in the user file
- */
-}
-
-/**
- * @brief UART error callbacks.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval None
- */
- __weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart)
-{
- /* Prevent unused argument(s) compilation warning */
- UNUSED(huart);
- /* NOTE: This function should not be modified, when the callback is needed,
- the HAL_UART_ErrorCallback can be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup UART_Exported_Functions_Group3 Peripheral Control functions
- * @brief UART control functions
- *
-@verbatim
- ==============================================================================
- ##### Peripheral Control functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to control the UART:
- (+) HAL_LIN_SendBreak() API can be helpful to transmit the break character.
- (+) HAL_MultiProcessor_EnterMuteMode() API can be helpful to enter the UART in mute mode.
- (+) HAL_MultiProcessor_ExitMuteMode() API can be helpful to exit the UART mute mode by software.
- (+) HAL_HalfDuplex_EnableTransmitter() API to enable the UART transmitter and disables the UART receiver in Half Duplex mode
- (+) HAL_HalfDuplex_EnableReceiver() API to enable the UART receiver and disables the UART transmitter in Half Duplex mode
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Transmits break characters.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart)
-{
- /* Check the parameters */
- assert_param(IS_UART_INSTANCE(huart->Instance));
-
- /* Process Locked */
- __HAL_LOCK(huart);
-
- huart->State = HAL_UART_STATE_BUSY;
-
- /* Send break characters */
- SET_BIT(huart->Instance->CR1, USART_CR1_SBK);
-
- huart->State = HAL_UART_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_OK;
-}
-
-/**
- * @brief Enters the UART in mute mode.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart)
-{
- /* Check the parameters */
- assert_param(IS_UART_INSTANCE(huart->Instance));
-
- /* Process Locked */
- __HAL_LOCK(huart);
-
- huart->State = HAL_UART_STATE_BUSY;
-
- /* Enable the USART mute mode by setting the RWU bit in the CR1 register */
- SET_BIT(huart->Instance->CR1, USART_CR1_RWU);
-
- huart->State = HAL_UART_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_OK;
-}
-
-/**
- * @brief Exits the UART mute mode: wake up software.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart)
-{
- /* Check the parameters */
- assert_param(IS_UART_INSTANCE(huart->Instance));
-
- /* Process Locked */
- __HAL_LOCK(huart);
-
- huart->State = HAL_UART_STATE_BUSY;
-
- /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */
- CLEAR_BIT(huart->Instance->CR1, USART_CR1_RWU);
-
- huart->State = HAL_UART_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_OK;
-}
-
-/**
- * @brief Enables the UART transmitter and disables the UART receiver.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart)
-{
- /* Process Locked */
- __HAL_LOCK(huart);
-
- huart->State = HAL_UART_STATE_BUSY;
-
- /*-------------------------- USART CR1 Configuration -----------------------*/
- /* Clear TE and RE bits */
- /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */
- MODIFY_REG(huart->Instance->CR1, (uint32_t)(USART_CR1_TE | USART_CR1_RE), USART_CR1_TE);
-
- huart->State = HAL_UART_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_OK;
-}
-
-/**
- * @brief Enables the UART receiver and disables the UART transmitter.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart)
-{
- /* Process Locked */
- __HAL_LOCK(huart);
-
- huart->State = HAL_UART_STATE_BUSY;
-
- /*-------------------------- USART CR1 Configuration -----------------------*/
- /* Clear TE and RE bits */
- /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */
- MODIFY_REG(huart->Instance->CR1, (uint32_t)(USART_CR1_TE | USART_CR1_RE), USART_CR1_RE);
-
- huart->State = HAL_UART_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup UART_Exported_Functions_Group4 Peripheral State and Errors functions
- * @brief UART State and Errors functions
- *
-@verbatim
- ==============================================================================
- ##### Peripheral State and Errors functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to return the State of
- UART communication process, return Peripheral Errors occurred during communication
- process
- (+) HAL_UART_GetState() API can be helpful to check in run-time the state of the UART peripheral.
- (+) HAL_UART_GetError() check in run-time errors that could be occurred during communication.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Returns the UART state.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL state
- */
-HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart)
-{
- return huart->State;
-}
-
-/**
-* @brief Return the UART error code
-* @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART.
-* @retval UART Error Code
-*/
-uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart)
-{
- return huart->ErrorCode;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/** @defgroup UART_Private_Functions UART Private Functions
- * @brief UART Private functions
- * @{
- */
-/**
- * @brief DMA UART transmit process complete callback.
- * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma)
-{
- UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- /* DMA Normal mode*/
- if ( HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC) )
- {
- huart->TxXferCount = 0;
-
- /* Disable the DMA transfer for transmit request by setting the DMAT bit
- in the UART CR3 register */
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT);
-
- /* Enable the UART Transmit Complete Interrupt */
- __HAL_UART_ENABLE_IT(huart, UART_IT_TC);
- }
- /* DMA Circular mode */
- else
- {
- HAL_UART_TxCpltCallback(huart);
- }
-}
-
-/**
- * @brief DMA UART transmit process half complete callback
- * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
-{
- UART_HandleTypeDef* huart = (UART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- HAL_UART_TxHalfCpltCallback(huart);
-}
-
-/**
- * @brief DMA UART receive process complete callback.
- * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
-{
- UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- /* DMA Normal mode*/
- if ( HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC) )
- {
- huart->RxXferCount = 0;
-
- /* Disable the DMA transfer for the receiver request by setting the DMAR bit
- in the UART CR3 register */
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
-
- /* Check if a transmit process is ongoing or not */
- if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
- {
- huart->State = HAL_UART_STATE_BUSY_TX;
- }
- else
- {
- huart->State = HAL_UART_STATE_READY;
- }
- }
- HAL_UART_RxCpltCallback(huart);
-}
-
-/**
- * @brief DMA UART receive process half complete callback
- * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
-{
- UART_HandleTypeDef* huart = (UART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- HAL_UART_RxHalfCpltCallback(huart);
-}
-
-/**
- * @brief DMA UART communication error callback.
- * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void UART_DMAError(DMA_HandleTypeDef *hdma)
-{
- UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- huart->RxXferCount = 0;
- huart->TxXferCount = 0;
- huart->State= HAL_UART_STATE_READY;
- huart->ErrorCode |= HAL_UART_ERROR_DMA;
- HAL_UART_ErrorCallback(huart);
-}
-
-/**
- * @brief This function handles UART Communication Timeout.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @param Flag: specifies the UART flag to check.
- * @param Status: The new Flag status (SET or RESET).
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait until flag is set */
- if(Status == RESET)
- {
- while(__HAL_UART_GET_FLAG(huart, Flag) == RESET)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
- __HAL_UART_DISABLE_IT(huart, UART_IT_TXE);
- __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE);
- __HAL_UART_DISABLE_IT(huart, UART_IT_PE);
- __HAL_UART_DISABLE_IT(huart, UART_IT_ERR);
-
- huart->State= HAL_UART_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- else
- {
- while(__HAL_UART_GET_FLAG(huart, Flag) != RESET)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
- __HAL_UART_DISABLE_IT(huart, UART_IT_TXE);
- __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE);
- __HAL_UART_DISABLE_IT(huart, UART_IT_PE);
- __HAL_UART_DISABLE_IT(huart, UART_IT_ERR);
-
- huart->State= HAL_UART_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- return HAL_OK;
-}
-
-/**
- * @brief Sends an amount of data in non blocking mode.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart)
-{
- uint16_t* tmp;
- uint32_t tmp_state = 0;
-
- tmp_state = huart->State;
- if((tmp_state == HAL_UART_STATE_BUSY_TX) || (tmp_state == HAL_UART_STATE_BUSY_TX_RX))
- {
- if(huart->Init.WordLength == UART_WORDLENGTH_9B)
- {
- tmp = (uint16_t*) huart->pTxBuffPtr;
- huart->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FF);
- if(huart->Init.Parity == UART_PARITY_NONE)
- {
- huart->pTxBuffPtr += 2;
- }
- else
- {
- huart->pTxBuffPtr += 1;
- }
- }
- else
- {
- huart->Instance->DR = (uint8_t)(*huart->pTxBuffPtr++ & (uint8_t)0x00FF);
- }
-
- if(--huart->TxXferCount == 0)
- {
- /* Disable the UART Transmit Complete Interrupt */
- __HAL_UART_DISABLE_IT(huart, UART_IT_TXE);
-
- /* Enable the UART Transmit Complete Interrupt */
- __HAL_UART_ENABLE_IT(huart, UART_IT_TC);
- }
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-
-/**
- * @brief Wraps up transmission in non blocking mode.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart)
-{
- /* Disable the UART Transmit Complete Interrupt */
- __HAL_UART_DISABLE_IT(huart, UART_IT_TC);
-
- /* Check if a receive process is ongoing or not */
- if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
- {
- huart->State = HAL_UART_STATE_BUSY_RX;
- }
- else
- {
- huart->State = HAL_UART_STATE_READY;
- }
-
- HAL_UART_TxCpltCallback(huart);
-
- return HAL_OK;
-}
-
-/**
- * @brief Receives an amount of data in non blocking mode
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart)
-{
- uint16_t* tmp;
- uint32_t tmp_state = 0;
-
- tmp_state = huart->State;
- if((tmp_state == HAL_UART_STATE_BUSY_RX) || (tmp_state == HAL_UART_STATE_BUSY_TX_RX))
- {
- if(huart->Init.WordLength == UART_WORDLENGTH_9B)
- {
- tmp = (uint16_t*) huart->pRxBuffPtr;
- if(huart->Init.Parity == UART_PARITY_NONE)
- {
- *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x01FF);
- huart->pRxBuffPtr += 2;
- }
- else
- {
- *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x00FF);
- huart->pRxBuffPtr += 1;
- }
- }
- else
- {
- if(huart->Init.Parity == UART_PARITY_NONE)
- {
- *huart->pRxBuffPtr++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x00FF);
- }
- else
- {
- *huart->pRxBuffPtr++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x007F);
- }
- }
-
- if(--huart->RxXferCount == 0)
- {
- __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE);
-
- /* Check if a transmit process is ongoing or not */
- if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
- {
- huart->State = HAL_UART_STATE_BUSY_TX;
- }
- else
- {
- /* Disable the UART Parity Error Interrupt */
- __HAL_UART_DISABLE_IT(huart, UART_IT_PE);
-
- /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */
- __HAL_UART_DISABLE_IT(huart, UART_IT_ERR);
-
- huart->State = HAL_UART_STATE_READY;
- }
- HAL_UART_RxCpltCallback(huart);
-
- return HAL_OK;
- }
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Configures the UART peripheral.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval None
- */
-static void UART_SetConfig(UART_HandleTypeDef *huart)
-{
- uint32_t tmpreg = 0x00;
-
- /* Check the parameters */
- assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate));
- assert_param(IS_UART_STOPBITS(huart->Init.StopBits));
- assert_param(IS_UART_PARITY(huart->Init.Parity));
- assert_param(IS_UART_MODE(huart->Init.Mode));
-
- /*------- UART-associated USART registers setting : CR2 Configuration ------*/
- /* Configure the UART Stop Bits: Set STOP[13:12] bits according
- * to huart->Init.StopBits value */
- MODIFY_REG(huart->Instance->CR2, USART_CR2_STOP, huart->Init.StopBits);
-
- /*------- UART-associated USART registers setting : CR1 Configuration ------*/
- /* Configure the UART Word Length, Parity and mode:
- Set the M bits according to huart->Init.WordLength value
- Set PCE and PS bits according to huart->Init.Parity value
- Set TE and RE bits according to huart->Init.Mode value */
- tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode ;
- MODIFY_REG(huart->Instance->CR1,
- (uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE),
- tmpreg);
-
- /*------- UART-associated USART registers setting : CR3 Configuration ------*/
- /* Configure the UART HFC: Set CTSE and RTSE bits according to huart->Init.HwFlowCtl value */
- MODIFY_REG(huart->Instance->CR3, (USART_CR3_RTSE | USART_CR3_CTSE), huart->Init.HwFlowCtl);
-
- /*------- UART-associated USART registers setting : BRR Configuration ------*/
- if((huart->Instance == USART1))
- {
- huart->Instance->BRR = UART_BRR_SAMPLING16(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate);
- }
- else
- {
- huart->Instance->BRR = UART_BRR_SAMPLING16(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate);
- }
-}
-/**
- * @}
- */
-
-#endif /* HAL_UART_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c
deleted file mode 100644
index 1b673cd..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c
+++ /dev/null
@@ -1,2211 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f1xx_ll_usb.c
- * @author MCD Application Team
- * @version V1.0.4
- * @date 29-April-2016
- * @brief USB Low Layer HAL module driver.
- *
- * This file provides firmware functions to manage the following
- * functionalities of the USB Peripheral Controller:
- * + Initialization/de-initialization functions
- * + I/O operation functions
- * + Peripheral Control functions
- * + Peripheral State functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- (#) Fill parameters of Init structure in USB_OTG_CfgTypeDef structure.
-
- (#) Call USB_CoreInit() API to initialize the USB Core peripheral.
-
- (#) The upper HAL HCD/PCD driver will call the right routines for its internal processes.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @defgroup USB_LL USB Low Layer
- * @brief Low layer module for USB_FS and USB_OTG_FS drivers
- * @{
- */
-
-#if defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED)
-
-#if defined(STM32F102x6) || defined(STM32F102xB) || \
- defined(STM32F103x6) || defined(STM32F103xB) || \
- defined(STM32F103xE) || defined(STM32F103xG) || \
- defined(STM32F105xC) || defined(STM32F107xC)
-
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/* Private macros ------------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-#if defined (USB_OTG_FS)
-/** @defgroup USB_LL_Private_Functions USB Low Layer Private Functions
- * @{
- */
-static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx);
-/**
- * @}
- */
-#endif /* USB_OTG_FS */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup USB_LL_Exported_Functions USB Low Layer Exported Functions
- * @{
- */
-
-/** @defgroup USB_LL_Exported_Functions_Group1 Peripheral Control functions
- * @brief management functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral Control functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to control the PCD data
- transfers.
-
-@endverbatim
- * @{
- */
-
-/*==============================================================================
- USB OTG FS peripheral available on STM32F105xx and STM32F107xx devices
-==============================================================================*/
-#if defined (USB_OTG_FS)
-
-/**
- * @brief Initializes the USB Core
- * @param USBx: USB Instance
- * @param cfg : pointer to a USB_OTG_CfgTypeDef structure that contains
- * the configuration information for the specified USBx peripheral.
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg)
-{
- /* Select FS Embedded PHY */
- USBx->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL;
-
- /* Reset after a PHY select and set Host mode */
- USB_CoreReset(USBx);
-
- /* Deactivate the power down*/
- USBx->GCCFG = USB_OTG_GCCFG_PWRDWN;
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_EnableGlobalInt
- * Enables the controller's Global Int in the AHB Config reg
- * @param USBx : Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx)
-{
- USBx->GAHBCFG |= USB_OTG_GAHBCFG_GINT;
- return HAL_OK;
-}
-
-/**
- * @brief USB_DisableGlobalInt
- * Disable the controller's Global Int in the AHB Config reg
- * @param USBx : Selected device
- * @retval HAL status
-*/
-HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx)
-{
- USBx->GAHBCFG &= ~USB_OTG_GAHBCFG_GINT;
- return HAL_OK;
-}
-
-/**
- * @brief USB_SetCurrentMode : Set functional mode
- * @param USBx : Selected device
- * @param mode : current core mode
- * This parameter can be one of the these values:
- * @arg USB_DEVICE_MODE: Peripheral mode mode
- * @arg USB_HOST_MODE: Host mode
- * @arg USB_DRD_MODE: Dual Role Device mode
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_ModeTypeDef mode)
-{
- USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_FHMOD | USB_OTG_GUSBCFG_FDMOD);
-
- if ( mode == USB_HOST_MODE)
- {
- USBx->GUSBCFG |= USB_OTG_GUSBCFG_FHMOD;
- }
- else if ( mode == USB_DEVICE_MODE)
- {
- USBx->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD;
- }
- HAL_Delay(50);
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_DevInit : Initializes the USB_OTG controller registers
- * for device mode
- * @param USBx : Selected device
- * @param cfg : pointer to a USB_OTG_CfgTypeDef structure that contains
- * the configuration information for the specified USBx peripheral.
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_DevInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg)
-{
- uint32_t index = 0;
-
- for (index = 0; index < 15 ; index++)
- {
- USBx->DIEPTXF[index] = 0;
- }
-
- /*Activate VBUS Sensing B */
- USBx->GCCFG |= USB_OTG_GCCFG_VBUSBSEN;
-
- /* Restart the Phy Clock */
- USBx_PCGCCTL = 0;
-
- /* Device mode configuration */
- USBx_DEVICE->DCFG |= DCFG_FRAME_INTERVAL_80;
-
- /* Set Full speed phy */
- USB_SetDevSpeed (USBx , USB_OTG_SPEED_FULL);
-
- /* Flush the FIFOs */
- USB_FlushTxFifo(USBx , 0x10); /* all Tx FIFOs */
- USB_FlushRxFifo(USBx);
-
- /* Clear all pending Device Interrupts */
- USBx_DEVICE->DIEPMSK = 0;
- USBx_DEVICE->DOEPMSK = 0;
- USBx_DEVICE->DAINT = 0xFFFFFFFF;
- USBx_DEVICE->DAINTMSK = 0;
-
- for (index = 0; index < cfg.dev_endpoints; index++)
- {
- if ((USBx_INEP(index)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA)
- {
- USBx_INEP(index)->DIEPCTL = (USB_OTG_DIEPCTL_EPDIS | USB_OTG_DIEPCTL_SNAK);
- }
- else
- {
- USBx_INEP(index)->DIEPCTL = 0;
- }
-
- USBx_INEP(index)->DIEPTSIZ = 0;
- USBx_INEP(index)->DIEPINT = 0xFF;
- }
-
- for (index = 0; index < cfg.dev_endpoints; index++)
- {
- if ((USBx_OUTEP(index)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA)
- {
- USBx_OUTEP(index)->DOEPCTL = (USB_OTG_DOEPCTL_EPDIS | USB_OTG_DOEPCTL_SNAK);
- }
- else
- {
- USBx_OUTEP(index)->DOEPCTL = 0;
- }
-
- USBx_OUTEP(index)->DOEPTSIZ = 0;
- USBx_OUTEP(index)->DOEPINT = 0xFF;
- }
-
- USBx_DEVICE->DIEPMSK &= ~(USB_OTG_DIEPMSK_TXFURM);
-
- /* Disable all interrupts. */
- USBx->GINTMSK = 0;
-
- /* Clear any pending interrupts */
- USBx->GINTSTS = 0xBFFFFFFF;
-
- /* Enable the common interrupts */
- USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM;
-
- /* Enable interrupts matching to the Device mode ONLY */
- USBx->GINTMSK |= (USB_OTG_GINTMSK_USBSUSPM | USB_OTG_GINTMSK_USBRST |\
- USB_OTG_GINTMSK_ENUMDNEM | USB_OTG_GINTMSK_IEPINT |\
- USB_OTG_GINTMSK_OEPINT | USB_OTG_GINTMSK_IISOIXFRM|\
- USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM);
-
- if(cfg.Sof_enable)
- {
- USBx->GINTMSK |= USB_OTG_GINTMSK_SOFM;
- }
-
- if (cfg.vbus_sensing_enable == ENABLE)
- {
- USBx->GINTMSK |= (USB_OTG_GINTMSK_SRQIM | USB_OTG_GINTMSK_OTGINT);
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_OTG_FlushTxFifo : Flush a Tx FIFO
- * @param USBx : Selected device
- * @param num : FIFO number
- * This parameter can be a value from 1 to 15
- 15 means Flush all Tx FIFOs
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num )
-{
- uint32_t count = 0;
-
- USBx->GRSTCTL = ( USB_OTG_GRSTCTL_TXFFLSH |(uint32_t)( num << 6));
-
- do
- {
- if (++count > 200000)
- {
- return HAL_TIMEOUT;
- }
- }
- while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_TXFFLSH) == USB_OTG_GRSTCTL_TXFFLSH);
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_FlushRxFifo : Flush Rx FIFO
- * @param USBx : Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx)
-{
- uint32_t count = 0;
-
- USBx->GRSTCTL = USB_OTG_GRSTCTL_RXFFLSH;
-
- do
- {
- if (++count > 200000)
- {
- return HAL_TIMEOUT;
- }
- }
- while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_RXFFLSH) == USB_OTG_GRSTCTL_RXFFLSH);
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_SetDevSpeed :Initializes the DevSpd field of DCFG register
- * depending the PHY type and the enumeration speed of the device.
- * @param USBx : Selected device
- * @param speed : device speed
- * This parameter can be one of the these values:
- * @arg USB_OTG_SPEED_FULL: Full speed mode
- * @arg USB_OTG_SPEED_LOW: Low speed mode
- * @retval Hal status
- */
-HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed)
-{
- USBx_DEVICE->DCFG |= speed;
- return HAL_OK;
-}
-
-/**
- * @brief USB_GetDevSpeed :Return the Dev Speed
- * @param USBx : Selected device
- * @retval speed : device speed
- * This parameter can be one of the these values:
- * @arg USB_OTG_SPEED_FULL: Full speed mode
- * @arg USB_OTG_SPEED_LOW: Low speed mode
- */
-uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx)
-{
- uint8_t speed = 0;
-
- if (((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ)||
- ((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_FS_PHY_48MHZ))
- {
- speed = USB_OTG_SPEED_FULL;
- }
- else if((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_LS_PHY_6MHZ)
- {
- speed = USB_OTG_SPEED_LOW;
- }
-
- return speed;
-}
-
-/**
- * @brief Activate and configure an endpoint
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
-{
- if (ep->is_in)
- {
- /* Assign a Tx FIFO */
- ep->tx_fifo_num = ep->num;
- }
- /* Set initial data PID. */
- if (ep->type == EP_TYPE_BULK )
- {
- ep->data_pid_start = 0;
- }
-
- if (ep->is_in == 1)
- {
- USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num)));
-
- if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_USBAEP) == 0)
- {
- USBx_INEP(ep->num)->DIEPCTL |= ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18 ) |\
- ((ep->num) << 22 ) | (USB_OTG_DIEPCTL_SD0PID_SEVNFRM) | (USB_OTG_DIEPCTL_USBAEP));
- }
- }
- else
- {
- USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16);
-
- if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0)
- {
- USBx_OUTEP(ep->num)->DOEPCTL |= ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18 ) |\
- (USB_OTG_DIEPCTL_SD0PID_SEVNFRM)| (USB_OTG_DOEPCTL_USBAEP));
- }
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief De-activate and de-initialize an endpoint
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
-{
- /* Read DEPCTLn register */
- if (ep->is_in == 1)
- {
- USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num))));
- USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num))));
- USBx_INEP(ep->num)->DIEPCTL &= ~ USB_OTG_DIEPCTL_USBAEP;
- }
- else
- {
- USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16));
- USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16));
- USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_USBAEP;
- }
- return HAL_OK;
-}
-
-/**
- * @brief USB_EPStartXfer : setup and starts a transfer over an EP
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep)
-{
- uint16_t pktcnt = 0;
-
- /* IN endpoint */
- if (ep->is_in == 1)
- {
- /* Zero Length Packet? */
- if (ep->xfer_len == 0)
- {
- USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
- USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1 << 19)) ;
- USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
- }
- else
- {
- /* Program the transfer size and packet count
- * as follows: xfersize = N * maxpacket +
- * short_packet pktcnt = N + (short_packet
- * exist ? 1 : 0)
- */
- USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
- USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
- USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (((ep->xfer_len + ep->maxpacket -1)/ ep->maxpacket) << 19)) ;
- USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len);
-
- if (ep->type == EP_TYPE_ISOC)
- {
- USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_MULCNT);
- USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_MULCNT & (1 << 29));
- }
- }
-
- if (ep->type != EP_TYPE_ISOC)
- {
- /* Enable the Tx FIFO Empty Interrupt for this EP */
- if (ep->xfer_len > 0)
- {
- USBx_DEVICE->DIEPEMPMSK |= 1 << ep->num;
- }
- }
-
- if (ep->type == EP_TYPE_ISOC)
- {
- if ((USBx_DEVICE->DSTS & ( 1 << 8 )) == 0)
- {
- USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM;
- }
- else
- {
- USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM;
- }
- }
-
- /* EP enable, IN data in FIFO */
- USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA);
-
- if (ep->type == EP_TYPE_ISOC)
- {
- USB_WritePacket(USBx, ep->xfer_buff, ep->num, ep->xfer_len);
- }
- }
- else /* OUT endpoint */
- {
- /* Program the transfer size and packet count as follows:
- * pktcnt = N
- * xfersize = N * maxpacket
- */
- USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ);
- USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT);
-
- if (ep->xfer_len == 0)
- {
- USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->maxpacket);
- USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1 << 19));
- }
- else
- {
- pktcnt = (ep->xfer_len + ep->maxpacket -1)/ ep->maxpacket;
- USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (pktcnt << 19));
- USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & (ep->maxpacket * pktcnt));
- }
-
- if (ep->type == EP_TYPE_ISOC)
- {
- if ((USBx_DEVICE->DSTS & ( 1 << 8 )) == 0)
- {
- USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SODDFRM;
- }
- else
- {
- USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM;
- }
- }
- /* EP enable */
- USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA);
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_EP0StartXfer : setup and starts a transfer over the EP 0
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep)
-{
- /* IN endpoint */
- if (ep->is_in == 1)
- {
- /* Zero Length Packet? */
- if (ep->xfer_len == 0)
- {
- USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
- USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1 << 19));
- USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
- }
- else
- {
- /* Program the transfer size and packet count
- * as follows: xfersize = N * maxpacket +
- * short_packet pktcnt = N + (short_packet
- * exist ? 1 : 0)
- */
- USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
- USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
-
- if(ep->xfer_len > ep->maxpacket)
- {
- ep->xfer_len = ep->maxpacket;
- }
- USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1 << 19));
- USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len);
- }
-
- /* Enable the Tx FIFO Empty Interrupt for this EP */
- if (ep->xfer_len > 0)
- {
- USBx_DEVICE->DIEPEMPMSK |= 1 << (ep->num);
- }
-
- /* EP enable, IN data in FIFO */
- USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA);
- }
- else /* OUT endpoint */
- {
- /* Program the transfer size and packet count as follows:
- * pktcnt = N
- * xfersize = N * maxpacket
- */
- USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ);
- USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT);
-
- if (ep->xfer_len > 0)
- {
- ep->xfer_len = ep->maxpacket;
- }
-
- USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1 << 19));
- USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & (ep->maxpacket));
-
- /* EP enable */
- USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA);
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_WritePacket : Writes a packet into the Tx FIFO associated
- * with the EP/channel
- * @param USBx : Selected device
- * @param src : pointer to source buffer
- * @param ch_ep_num : endpoint or host channel number
- * @param len : Number of bytes to write
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len)
-{
- uint32_t count32b = 0 , index = 0;
-
- count32b = (len + 3) / 4;
- for (index = 0; index < count32b; index++, src += 4)
- {
- USBx_DFIFO(ch_ep_num) = *((__packed uint32_t *)src);
- }
- return HAL_OK;
-}
-
-/**
- * @brief USB_ReadPacket : read a packet from the Tx FIFO associated
- * with the EP/channel
- * @param USBx : Selected device
- * @param dest : destination pointer
- * @param len : Number of bytes to read
- * @retval pointer to destination buffer
- */
-void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len)
-{
- uint32_t index = 0;
- uint32_t count32b = (len + 3) / 4;
-
- for ( index = 0; index < count32b; index++, dest += 4 )
- {
- *(__packed uint32_t *)dest = USBx_DFIFO(0);
-
- }
- return ((void *)dest);
-}
-
-/**
- * @brief USB_EPSetStall : set a stall condition over an EP
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep)
-{
- if (ep->is_in == 1)
- {
- if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_EPENA) == 0)
- {
- USBx_INEP(ep->num)->DIEPCTL &= ~(USB_OTG_DIEPCTL_EPDIS);
- }
- USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_STALL;
- }
- else
- {
- if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_EPENA) == 0)
- {
- USBx_OUTEP(ep->num)->DOEPCTL &= ~(USB_OTG_DOEPCTL_EPDIS);
- }
- USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_STALL;
- }
- return HAL_OK;
-}
-
-/**
- * @brief USB_EPClearStall : Clear a stall condition over an EP
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
-{
- if (ep->is_in == 1)
- {
- USBx_INEP(ep->num)->DIEPCTL &= ~USB_OTG_DIEPCTL_STALL;
- if (ep->type == EP_TYPE_INTR || ep->type == EP_TYPE_BULK)
- {
- USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; /* DATA0 */
- }
- }
- else
- {
- USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_STALL;
- if (ep->type == EP_TYPE_INTR || ep->type == EP_TYPE_BULK)
- {
- USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; /* DATA0 */
- }
- }
- return HAL_OK;
-}
-
-/**
- * @brief USB_StopDevice : Stop the usb device mode
- * @param USBx : Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx)
-{
- uint32_t index = 0;
-
- /* Clear Pending interrupt */
- for (index = 0; index < 15 ; index++)
- {
- USBx_INEP(index)->DIEPINT = 0xFF;
- USBx_OUTEP(index)->DOEPINT = 0xFF;
- }
- USBx_DEVICE->DAINT = 0xFFFFFFFF;
-
- /* Clear interrupt masks */
- USBx_DEVICE->DIEPMSK = 0;
- USBx_DEVICE->DOEPMSK = 0;
- USBx_DEVICE->DAINTMSK = 0;
-
- /* Flush the FIFO */
- USB_FlushRxFifo(USBx);
- USB_FlushTxFifo(USBx , 0x10 );
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_SetDevAddress : Stop the usb device mode
- * @param USBx : Selected device
- * @param address : new device address to be assigned
- * This parameter can be a value from 0 to 255
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address)
-{
- USBx_DEVICE->DCFG &= ~ (USB_OTG_DCFG_DAD);
- USBx_DEVICE->DCFG |= (address << 4) & USB_OTG_DCFG_DAD;
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_DevConnect : Connect the USB device by enabling the pull-up/pull-down
- * @param USBx : Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx)
-{
- USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_SDIS ;
- HAL_Delay(3);
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_DevDisconnect : Disconnect the USB device by disabling the pull-up/pull-down
- * @param USBx : Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx)
-{
- USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS;
- HAL_Delay(3);
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_ReadInterrupts: return the global USB interrupt status
- * @param USBx : Selected device
- * @retval HAL status
- */
-uint32_t USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx)
-{
- uint32_t tmpreg = 0;
-
- tmpreg = USBx->GINTSTS;
- tmpreg &= USBx->GINTMSK;
- return tmpreg;
-}
-
-/**
- * @brief USB_ReadDevAllOutEpInterrupt: return the USB device OUT endpoints interrupt status
- * @param USBx : Selected device
- * @retval HAL status
- */
-uint32_t USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx)
-{
- uint32_t tmpreg = 0;
- tmpreg = USBx_DEVICE->DAINT;
- tmpreg &= USBx_DEVICE->DAINTMSK;
- return ((tmpreg & 0xffff0000) >> 16);
-}
-
-/**
- * @brief USB_ReadDevAllInEpInterrupt: return the USB device IN endpoints interrupt status
- * @param USBx : Selected device
- * @retval HAL status
- */
-uint32_t USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx)
-{
- uint32_t tmpreg = 0;
- tmpreg = USBx_DEVICE->DAINT;
- tmpreg &= USBx_DEVICE->DAINTMSK;
- return ((tmpreg & 0xFFFF));
-}
-
-/**
- * @brief Returns Device OUT EP Interrupt register
- * @param USBx : Selected device
- * @param epnum : endpoint number
- * This parameter can be a value from 0 to 15
- * @retval Device OUT EP Interrupt register
- */
-uint32_t USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum)
-{
- uint32_t tmpreg = 0;
- tmpreg = USBx_OUTEP(epnum)->DOEPINT;
- tmpreg &= USBx_DEVICE->DOEPMSK;
- return tmpreg;
-}
-
-/**
- * @brief Returns Device IN EP Interrupt register
- * @param USBx : Selected device
- * @param epnum : endpoint number
- * This parameter can be a value from 0 to 15
- * @retval Device IN EP Interrupt register
- */
-uint32_t USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum)
-{
- uint32_t tmpreg = 0, msk = 0, emp = 0;
-
- msk = USBx_DEVICE->DIEPMSK;
- emp = USBx_DEVICE->DIEPEMPMSK;
- msk |= ((emp >> epnum) & 0x1) << 7;
- tmpreg = USBx_INEP(epnum)->DIEPINT & msk;
- return tmpreg;
-}
-
-/**
- * @brief USB_ClearInterrupts: clear a USB interrupt
- * @param USBx : Selected device
- * @param interrupt : interrupt flag
- * @retval None
- */
-void USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt)
-{
- USBx->GINTSTS |= interrupt;
-}
-
-/**
- * @brief Returns USB core mode
- * @param USBx : Selected device
- * @retval return core mode : Host or Device
- * This parameter can be one of the these values:
- * 0 : Host
- * 1 : Device
- */
-uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx)
-{
- return ((USBx->GINTSTS ) & 0x1);
-}
-
-/**
- * @brief Activate EP0 for Setup transactions
- * @param USBx : Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx)
-{
- /* Set the MPS of the IN EP based on the enumeration speed */
- USBx_INEP(0)->DIEPCTL &= ~USB_OTG_DIEPCTL_MPSIZ;
-
- if((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_LS_PHY_6MHZ)
- {
- USBx_INEP(0)->DIEPCTL |= 3;
- }
- USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGINAK;
-
- return HAL_OK;
-}
-
-/**
- * @brief Prepare the EP0 to start the first control setup
- * @param USBx : Selected device
- * @param psetup : pointer to setup packet
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t *psetup)
-{
- USBx_OUTEP(0)->DOEPTSIZ = 0;
- USBx_OUTEP(0)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1 << 19));
- USBx_OUTEP(0)->DOEPTSIZ |= (3 * 8);
- USBx_OUTEP(0)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_STUPCNT;
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_HostInit : Initializes the USB OTG controller registers
- * for Host mode
- * @param USBx : Selected device
- * @param cfg : pointer to a USB_OTG_CfgTypeDef structure that contains
- * the configuration information for the specified USBx peripheral.
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg)
-{
- uint32_t index = 0;
-
- /* Restart the Phy Clock */
- USBx_PCGCCTL = 0;
-
- /* no VBUS sensing*/
- USBx->GCCFG &=~ (USB_OTG_GCCFG_VBUSASEN);
- USBx->GCCFG &=~ (USB_OTG_GCCFG_VBUSBSEN);
-
- /* Disable the FS/LS support mode only */
- if((cfg.speed == USB_OTG_SPEED_FULL)&&
- (USBx != USB_OTG_FS))
- {
- USBx_HOST->HCFG |= USB_OTG_HCFG_FSLSS;
- }
- else
- {
- USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSS);
- }
-
- /* Make sure the FIFOs are flushed. */
- USB_FlushTxFifo(USBx, 0x10 ); /* all Tx FIFOs */
- USB_FlushRxFifo(USBx);
-
- /* Clear all pending HC Interrupts */
- for (index = 0; index < cfg.Host_channels; index++)
- {
- USBx_HC(index)->HCINT = 0xFFFFFFFF;
- USBx_HC(index)->HCINTMSK = 0;
- }
-
- /* Enable VBUS driving */
- USB_DriveVbus(USBx, 1);
-
- HAL_Delay(200);
-
- /* Disable all interrupts. */
- USBx->GINTMSK = 0;
-
- /* Clear any pending interrupts */
- USBx->GINTSTS = 0xFFFFFFFF;
-
- if(USBx == USB_OTG_FS)
- {
- /* set Rx FIFO size */
- USBx->GRXFSIZ = (uint32_t )0x80;
- USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t )(((0x60 << 16)& USB_OTG_NPTXFD) | 0x80);
- USBx->HPTXFSIZ = (uint32_t )(((0x40 << 16)& USB_OTG_HPTXFSIZ_PTXFD) | 0xE0);
- }
-
- /* Enable the common interrupts */
- USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM;
-
- /* Enable interrupts matching to the Host mode ONLY */
- USBx->GINTMSK |= (USB_OTG_GINTMSK_PRTIM | USB_OTG_GINTMSK_HCIM |\
- USB_OTG_GINTMSK_SOFM |USB_OTG_GINTSTS_DISCINT|\
- USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM);
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_InitFSLSPClkSel : Initializes the FSLSPClkSel field of the
- * HCFG register on the PHY type and set the right frame interval
- * @param USBx : Selected device
- * @param freq : clock frequency
- * This parameter can be one of the these values:
- * HCFG_48_MHZ : Full Speed 48 MHz Clock
- * HCFG_6_MHZ : Low Speed 6 MHz Clock
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq)
-{
- USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSPCS);
- USBx_HOST->HCFG |= (freq & USB_OTG_HCFG_FSLSPCS);
-
- if (freq == HCFG_48_MHZ)
- {
- USBx_HOST->HFIR = (uint32_t)48000;
- }
- else if (freq == HCFG_6_MHZ)
- {
- USBx_HOST->HFIR = (uint32_t)6000;
- }
- return HAL_OK;
-}
-
-/**
-* @brief USB_OTG_ResetPort : Reset Host Port
- * @param USBx : Selected device
- * @retval HAL status
- * @note : (1)The application must wait at least 10 ms
- * before clearing the reset bit.
- */
-HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx)
-{
- __IO uint32_t hprt0 = 0;
-
- hprt0 = USBx_HPRT0;
-
- hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
- USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
-
- USBx_HPRT0 = (USB_OTG_HPRT_PRST | hprt0);
- HAL_Delay (10); /* See Note #1 */
- USBx_HPRT0 = ((~USB_OTG_HPRT_PRST) & hprt0);
- return HAL_OK;
-}
-
-/**
- * @brief USB_DriveVbus : activate or de-activate vbus
- * @param state : VBUS state
- * This parameter can be one of the these values:
- * 0 : VBUS Active
- * 1 : VBUS Inactive
- * @retval HAL status
-*/
-HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state)
-{
- __IO uint32_t hprt0 = 0;
-
- hprt0 = USBx_HPRT0;
- hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
- USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
-
- if (((hprt0 & USB_OTG_HPRT_PPWR) == 0 ) && (state == 1 ))
- {
- USBx_HPRT0 = (USB_OTG_HPRT_PPWR | hprt0);
- }
- if (((hprt0 & USB_OTG_HPRT_PPWR) == USB_OTG_HPRT_PPWR) && (state == 0 ))
- {
- USBx_HPRT0 = ((~USB_OTG_HPRT_PPWR) & hprt0);
- }
- return HAL_OK;
-}
-
-/**
- * @brief Return Host Core speed
- * @param USBx : Selected device
- * @retval speed : Host speed
- * This parameter can be one of the these values:
- * @arg USB_OTG_SPEED_FULL: Full speed mode
- * @arg USB_OTG_SPEED_LOW: Low speed mode
- */
-uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx)
-{
- __IO uint32_t hprt0 = 0;
-
- hprt0 = USBx_HPRT0;
- return ((hprt0 & USB_OTG_HPRT_PSPD) >> 17);
-}
-
-/**
- * @brief Return Host Current Frame number
- * @param USBx : Selected device
- * @retval current frame number
-*/
-uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx)
-{
- return (USBx_HOST->HFNUM & USB_OTG_HFNUM_FRNUM);
-}
-
-/**
- * @brief Initialize a host channel
- * @param USBx : Selected device
- * @param ch_num : Channel number
- * This parameter can be a value from 1 to 15
- * @param epnum : Endpoint number
- * This parameter can be a value from 1 to 15
- * @param dev_address : Current device address
- * This parameter can be a value from 0 to 255
- * @param speed : Current device speed
- * This parameter can be one of the these values:
- * @arg USB_OTG_SPEED_FULL: Full speed mode
- * @arg USB_OTG_SPEED_LOW: Low speed mode
- * @param ep_type : Endpoint Type
- * This parameter can be one of the these values:
- * @arg EP_TYPE_CTRL: Control type
- * @arg EP_TYPE_ISOC: Isochronous type
- * @arg EP_TYPE_BULK: Bulk type
- * @arg EP_TYPE_INTR: Interrupt type
- * @param mps : Max Packet Size
- * This parameter can be a value from 0 to32K
- * @retval HAL state
- */
-HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx,
- uint8_t ch_num,
- uint8_t epnum,
- uint8_t dev_address,
- uint8_t speed,
- uint8_t ep_type,
- uint16_t mps)
-{
- /* Clear old interrupt conditions for this host channel. */
- USBx_HC(ch_num)->HCINT = 0xFFFFFFFF;
-
- /* Enable channel interrupts required for this transfer. */
- switch (ep_type)
- {
- case EP_TYPE_CTRL:
- case EP_TYPE_BULK:
- USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM |\
- USB_OTG_HCINTMSK_STALLM |\
- USB_OTG_HCINTMSK_TXERRM |\
- USB_OTG_HCINTMSK_DTERRM |\
- USB_OTG_HCINTMSK_AHBERR |\
- USB_OTG_HCINTMSK_NAKM ;
-
- if (epnum & 0x80)
- {
- USBx_HC(ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM;
- }
- break;
-
- case EP_TYPE_INTR:
- USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM |\
- USB_OTG_HCINTMSK_STALLM |\
- USB_OTG_HCINTMSK_TXERRM |\
- USB_OTG_HCINTMSK_DTERRM |\
- USB_OTG_HCINTMSK_NAKM |\
- USB_OTG_HCINTMSK_AHBERR |\
- USB_OTG_HCINTMSK_FRMORM ;
-
- if (epnum & 0x80)
- {
- USBx_HC(ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM;
- }
-
- break;
-
- case EP_TYPE_ISOC:
- USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM |\
- USB_OTG_HCINTMSK_ACKM |\
- USB_OTG_HCINTMSK_AHBERR |\
- USB_OTG_HCINTMSK_FRMORM ;
-
- if (epnum & 0x80)
- {
- USBx_HC(ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_TXERRM | USB_OTG_HCINTMSK_BBERRM);
- }
- break;
- }
-
- /* Enable the top level host channel interrupt. */
- USBx_HOST->HAINTMSK |= (1 << ch_num);
-
- /* Make sure host channel interrupts are enabled. */
- USBx->GINTMSK |= USB_OTG_GINTMSK_HCIM;
-
- /* Program the HCCHAR register */
- USBx_HC(ch_num)->HCCHAR = (((dev_address << 22) & USB_OTG_HCCHAR_DAD) |\
- (((epnum & 0x7F)<< 11) & USB_OTG_HCCHAR_EPNUM)|\
- ((((epnum & 0x80) == 0x80)<< 15) & USB_OTG_HCCHAR_EPDIR)|\
- (((speed == HPRT0_PRTSPD_LOW_SPEED)<< 17) & USB_OTG_HCCHAR_LSDEV)|\
- ((ep_type << 18) & USB_OTG_HCCHAR_EPTYP)|\
- (mps & USB_OTG_HCCHAR_MPSIZ));
-
- if (ep_type == EP_TYPE_INTR)
- {
- USBx_HC(ch_num)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM ;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Start a transfer over a host channel
- * @param USBx : Selected device
- * @param hc : pointer to host channel structure
- * @retval HAL state
- */
-#if defined (__CC_ARM) /*!< ARM Compiler */
-#pragma O0
-#elif defined (__GNUC__) /*!< GNU Compiler */
-#pragma GCC optimize ("O0")
-#endif /* __CC_ARM */
-HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc)
-{
- uint8_t is_oddframe = 0;
- uint16_t len_words = 0;
- uint16_t num_packets = 0;
- uint16_t max_hc_pkt_count = 256;
- uint32_t tmpreg = 0;
-
- /* Compute the expected number of packets associated to the transfer */
- if (hc->xfer_len > 0)
- {
- num_packets = (hc->xfer_len + hc->max_packet - 1) / hc->max_packet;
-
- if (num_packets > max_hc_pkt_count)
- {
- num_packets = max_hc_pkt_count;
- hc->xfer_len = num_packets * hc->max_packet;
- }
- }
- else
- {
- num_packets = 1;
- }
- if (hc->ep_is_in)
- {
- hc->xfer_len = num_packets * hc->max_packet;
- }
-
- /* Initialize the HCTSIZn register */
- USBx_HC(hc->ch_num)->HCTSIZ = (((hc->xfer_len) & USB_OTG_HCTSIZ_XFRSIZ)) |\
- ((num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) |\
- (((hc->data_pid) << 29) & USB_OTG_HCTSIZ_DPID);
-
- is_oddframe = (USBx_HOST->HFNUM & 0x01) ? 0 : 1;
- USBx_HC(hc->ch_num)->HCCHAR &= ~USB_OTG_HCCHAR_ODDFRM;
- USBx_HC(hc->ch_num)->HCCHAR |= (is_oddframe << 29);
-
- /* Set host channel enable */
- tmpreg = USBx_HC(hc->ch_num)->HCCHAR;
- tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
- tmpreg |= USB_OTG_HCCHAR_CHENA;
- USBx_HC(hc->ch_num)->HCCHAR = tmpreg;
-
- if((hc->ep_is_in == 0) && (hc->xfer_len > 0))
- {
- switch(hc->ep_type)
- {
- /* Non periodic transfer */
- case EP_TYPE_CTRL:
- case EP_TYPE_BULK:
- len_words = (hc->xfer_len + 3) / 4;
-
- /* check if there is enough space in FIFO space */
- if(len_words > (USBx->HNPTXSTS & 0xFFFF))
- {
- /* need to process data in nptxfempty interrupt */
- USBx->GINTMSK |= USB_OTG_GINTMSK_NPTXFEM;
- }
- break;
-
- /* Periodic transfer */
- case EP_TYPE_INTR:
- case EP_TYPE_ISOC:
- len_words = (hc->xfer_len + 3) / 4;
- /* check if there is enough space in FIFO space */
- if(len_words > (USBx_HOST->HPTXSTS & 0xFFFF)) /* split the transfer */
- {
- /* need to process data in ptxfempty interrupt */
- USBx->GINTMSK |= USB_OTG_GINTMSK_PTXFEM;
- }
- break;
-
- default:
- break;
- }
-
- /* Write packet into the Tx FIFO. */
- USB_WritePacket(USBx, hc->xfer_buff, hc->ch_num, hc->xfer_len);
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Read all host channel interrupts status
- * @param USBx : Selected device
- * @retval HAL state
- */
-uint32_t USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx)
-{
- return ((USBx_HOST->HAINT) & 0xFFFF);
-}
-
-/**
- * @brief Halt a host channel
- * @param USBx : Selected device
- * @param hc_num : Host Channel number
- * This parameter can be a value from 1 to 15
- * @retval HAL state
- */
-HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num)
-{
- uint32_t count = 0;
-
- /* Check for space in the request queue to issue the halt. */
- if (((USBx_HC(hc_num)->HCCHAR) & (HCCHAR_CTRL << 18)) || ((USBx_HC(hc_num)->HCCHAR) & (HCCHAR_BULK << 18)))
- {
- USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHDIS;
-
- if ((USBx->HNPTXSTS & 0xFFFF) == 0)
- {
- USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA;
- USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
- USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_EPDIR;
- do
- {
- if (++count > 1000)
- {
- break;
- }
- }
- while ((USBx_HC(hc_num)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
- }
- else
- {
- USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
- }
- }
- else
- {
- USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHDIS;
-
- if ((USBx_HOST->HPTXSTS & 0xFFFF) == 0)
- {
- USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA;
- USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
- USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_EPDIR;
- do
- {
- if (++count > 1000)
- {
- break;
- }
- }
- while ((USBx_HC(hc_num)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
- }
- else
- {
- USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
- }
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Initiate Do Ping protocol
- * @param USBx : Selected device
- * @param hc_num : Host Channel number
- * This parameter can be a value from 1 to 15
- * @retval HAL state
- */
-HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num)
-{
- uint8_t num_packets = 1;
- uint32_t tmpreg = 0;
-
- USBx_HC(ch_num)->HCTSIZ = ((num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) |\
- USB_OTG_HCTSIZ_DOPING;
-
- /* Set host channel enable */
- tmpreg = USBx_HC(ch_num)->HCCHAR;
- tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
- tmpreg |= USB_OTG_HCCHAR_CHENA;
- USBx_HC(ch_num)->HCCHAR = tmpreg;
-
- return HAL_OK;
-}
-
-/**
- * @brief Stop Host Core
- * @param USBx : Selected device
- * @retval HAL state
- */
-HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx)
-{
- uint8_t index;
- uint32_t count = 0;
- uint32_t value = 0;
-
- USB_DisableGlobalInt(USBx);
-
- /* Flush FIFO */
- USB_FlushTxFifo(USBx, 0x10);
- USB_FlushRxFifo(USBx);
-
- /* Flush out any leftover queued requests. */
- for (index = 0; index <= 15; index++)
- {
- value = USBx_HC(index)->HCCHAR;
- value |= USB_OTG_HCCHAR_CHDIS;
- value &= ~USB_OTG_HCCHAR_CHENA;
- value &= ~USB_OTG_HCCHAR_EPDIR;
- USBx_HC(index)->HCCHAR = value;
- }
-
- /* Halt all channels to put them into a known state. */
- for (index = 0; index <= 15; index++)
- {
- value = USBx_HC(index)->HCCHAR ;
- value |= USB_OTG_HCCHAR_CHDIS;
- value |= USB_OTG_HCCHAR_CHENA;
- value &= ~USB_OTG_HCCHAR_EPDIR;
- USBx_HC(index)->HCCHAR = value;
-
- do
- {
- if (++count > 1000)
- {
- break;
- }
- }
- while ((USBx_HC(index)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
- }
-
- /* Clear any pending Host interrupts */
- USBx_HOST->HAINT = 0xFFFFFFFF;
- USBx->GINTSTS = 0xFFFFFFFF;
- USB_EnableGlobalInt(USBx);
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_ActivateRemoteWakeup : active remote wakeup signalling
- * @param USBx : Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx)
-{
- if((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS)
- {
- /* active Remote wakeup signalling */
- USBx_DEVICE->DCTL |= USB_OTG_DCTL_RWUSIG;
- }
- return HAL_OK;
-}
-
-/**
- * @brief USB_DeActivateRemoteWakeup : de-active remote wakeup signalling
- * @param USBx : Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx)
-{
- /* active Remote wakeup signalling */
- USBx_DEVICE->DCTL &= ~(USB_OTG_DCTL_RWUSIG);
- return HAL_OK;
-}
-
-#endif /* USB_OTG_FS */
-
-/*==============================================================================
- USB Device FS peripheral available on STM32F102xx and STM32F103xx devices
-==============================================================================*/
-#if defined (USB)
-/**
- * @brief Initializes the USB Core
- * @param USBx: USB Instance
- * @param cfg : pointer to a USB_CfgTypeDef structure that contains
- * the configuration information for the specified USBx peripheral.
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_CoreInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg)
-{
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
- return HAL_OK;
-}
-
-/**
- * @brief USB_EnableGlobalInt
- * Enables the controller's Global Int in the AHB Config reg
- * @param USBx : Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx)
-{
- uint32_t winterruptmask = 0;
-
- /* Set winterruptmask variable */
- winterruptmask = USB_CNTR_CTRM | USB_CNTR_WKUPM | USB_CNTR_SUSPM | USB_CNTR_ERRM \
- | USB_CNTR_ESOFM | USB_CNTR_RESETM;
-
- /* Set interrupt mask */
- USBx->CNTR |= winterruptmask;
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_DisableGlobalInt
- * Disable the controller's Global Int in the AHB Config reg
- * @param USBx : Selected device
- * @retval HAL status
-*/
-HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx)
-{
- uint32_t winterruptmask = 0;
-
- /* Set winterruptmask variable */
- winterruptmask = USB_CNTR_CTRM | USB_CNTR_WKUPM | USB_CNTR_SUSPM | USB_CNTR_ERRM \
- | USB_CNTR_ESOFM | USB_CNTR_RESETM;
-
- /* Clear interrupt mask */
- USBx->CNTR &= ~winterruptmask;
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_SetCurrentMode : Set functional mode
- * @param USBx : Selected device
- * @param mode : current core mode
- * This parameter can be one of the these values:
- * @arg USB_DEVICE_MODE: Peripheral mode mode
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx , USB_ModeTypeDef mode)
-{
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
- return HAL_OK;
-}
-
-/**
- * @brief USB_DevInit : Initializes the USB controller registers
- * for device mode
- * @param USBx : Selected device
- * @param cfg : pointer to a USB_CfgTypeDef structure that contains
- * the configuration information for the specified USBx peripheral.
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_DevInit (USB_TypeDef *USBx, USB_CfgTypeDef cfg)
-{
- /* Init Device */
- /*CNTR_FRES = 1*/
- USBx->CNTR = USB_CNTR_FRES;
-
- /*CNTR_FRES = 0*/
- USBx->CNTR = 0;
-
- /*Clear pending interrupts*/
- USBx->ISTR = 0;
-
- /*Set Btable Address*/
- USBx->BTABLE = BTABLE_ADDRESS;
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_FlushTxFifo : Flush a Tx FIFO
- * @param USBx : Selected device
- * @param num : FIFO number
- * This parameter can be a value from 1 to 15
- 15 means Flush all Tx FIFOs
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_FlushTxFifo (USB_TypeDef *USBx, uint32_t num )
-{
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
- return HAL_OK;
-}
-
-/**
- * @brief USB_FlushRxFifo : Flush Rx FIFO
- * @param USBx : Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_FlushRxFifo(USB_TypeDef *USBx)
-{
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
- return HAL_OK;
-}
-
-/**
- * @brief Activate and configure an endpoint
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep)
-{
- /* initialize Endpoint */
- switch (ep->type)
- {
- case EP_TYPE_CTRL:
- PCD_SET_EPTYPE(USBx, ep->num, USB_EP_CONTROL);
- break;
- case EP_TYPE_BULK:
- PCD_SET_EPTYPE(USBx, ep->num, USB_EP_BULK);
- break;
- case EP_TYPE_INTR:
- PCD_SET_EPTYPE(USBx, ep->num, USB_EP_INTERRUPT);
- break;
- case EP_TYPE_ISOC:
- PCD_SET_EPTYPE(USBx, ep->num, USB_EP_ISOCHRONOUS);
- break;
- default:
- break;
- }
-
- PCD_SET_EP_ADDRESS(USBx, ep->num, ep->num);
-
- if (ep->doublebuffer == 0)
- {
- if (ep->is_in)
- {
- /*Set the endpoint Transmit buffer address */
- PCD_SET_EP_TX_ADDRESS(USBx, ep->num, ep->pmaadress);
- PCD_CLEAR_TX_DTOG(USBx, ep->num);
- /* Configure NAK status for the Endpoint*/
- PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK);
- }
- else
- {
- /*Set the endpoint Receive buffer address */
- PCD_SET_EP_RX_ADDRESS(USBx, ep->num, ep->pmaadress);
- /*Set the endpoint Receive buffer counter*/
- PCD_SET_EP_RX_CNT(USBx, ep->num, ep->maxpacket);
- PCD_CLEAR_RX_DTOG(USBx, ep->num);
- /* Configure VALID status for the Endpoint*/
- PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID);
- }
- }
- /*Double Buffer*/
- else
- {
- /*Set the endpoint as double buffered*/
- PCD_SET_EP_DBUF(USBx, ep->num);
- /*Set buffer address for double buffered mode*/
- PCD_SET_EP_DBUF_ADDR(USBx, ep->num,ep->pmaaddr0, ep->pmaaddr1);
-
- if (ep->is_in==0)
- {
- /* Clear the data toggle bits for the endpoint IN/OUT*/
- PCD_CLEAR_RX_DTOG(USBx, ep->num);
- PCD_CLEAR_TX_DTOG(USBx, ep->num);
-
- /* Reset value of the data toggle bits for the endpoint out*/
- PCD_TX_DTOG(USBx, ep->num);
-
- PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID);
- PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS);
- }
- else
- {
- /* Clear the data toggle bits for the endpoint IN/OUT*/
- PCD_CLEAR_RX_DTOG(USBx, ep->num);
- PCD_CLEAR_TX_DTOG(USBx, ep->num);
- PCD_RX_DTOG(USBx, ep->num);
- /* Configure DISABLE status for the Endpoint*/
- PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS);
- PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS);
- }
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief De-activate and de-initialize an endpoint
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep)
-{
- if (ep->doublebuffer == 0)
- {
- if (ep->is_in)
- {
- PCD_CLEAR_TX_DTOG(USBx, ep->num);
- /* Configure DISABLE status for the Endpoint*/
- PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS);
- }
- else
- {
- PCD_CLEAR_RX_DTOG(USBx, ep->num);
- /* Configure DISABLE status for the Endpoint*/
- PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS);
- }
- }
- /*Double Buffer*/
- else
- {
- if (ep->is_in==0)
- {
- /* Clear the data toggle bits for the endpoint IN/OUT*/
- PCD_CLEAR_RX_DTOG(USBx, ep->num);
- PCD_CLEAR_TX_DTOG(USBx, ep->num);
-
- /* Reset value of the data toggle bits for the endpoint out*/
- PCD_TX_DTOG(USBx, ep->num);
-
- PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS);
- PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS);
- }
- else
- {
- /* Clear the data toggle bits for the endpoint IN/OUT*/
- PCD_CLEAR_RX_DTOG(USBx, ep->num);
- PCD_CLEAR_TX_DTOG(USBx, ep->num);
- PCD_RX_DTOG(USBx, ep->num);
- /* Configure DISABLE status for the Endpoint*/
- PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS);
- PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS);
- }
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_EPStartXfer : setup and starts a transfer over an EP
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx , USB_EPTypeDef *ep)
-{
- uint16_t pmabuffer = 0;
- uint32_t len = ep->xfer_len;
-
- /* IN endpoint */
- if (ep->is_in == 1)
- {
- /*Multi packet transfer*/
- if (ep->xfer_len > ep->maxpacket)
- {
- len=ep->maxpacket;
- ep->xfer_len-=len;
- }
- else
- {
- len=ep->xfer_len;
- ep->xfer_len =0;
- }
-
- /* configure and validate Tx endpoint */
- if (ep->doublebuffer == 0)
- {
- USB_WritePMA(USBx, ep->xfer_buff, ep->pmaadress, len);
- PCD_SET_EP_TX_CNT(USBx, ep->num, len);
- }
- else
- {
- /* Write the data to the USB endpoint */
- if (PCD_GET_ENDPOINT(USBx, ep->num)& USB_EP_DTOG_TX)
- {
- /* Set the Double buffer counter for pmabuffer1 */
- PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len);
- pmabuffer = ep->pmaaddr1;
- }
- else
- {
- /* Set the Double buffer counter for pmabuffer0 */
- PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len);
- pmabuffer = ep->pmaaddr0;
- }
- USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, len);
- PCD_FreeUserBuffer(USBx, ep->num, ep->is_in);
- }
-
- PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_VALID);
- }
- else /* OUT endpoint */
- {
- /* Multi packet transfer*/
- if (ep->xfer_len > ep->maxpacket)
- {
- len=ep->maxpacket;
- ep->xfer_len-=len;
- }
- else
- {
- len=ep->xfer_len;
- ep->xfer_len =0;
- }
-
- /* configure and validate Rx endpoint */
- if (ep->doublebuffer == 0)
- {
- /*Set RX buffer count*/
- PCD_SET_EP_RX_CNT(USBx, ep->num, len);
- }
- else
- {
- /*Set the Double buffer counter*/
- PCD_SET_EP_DBUF_CNT(USBx, ep->num, ep->is_in, len);
- }
-
- PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID);
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_WritePacket : Writes a packet into the Tx FIFO associated
- * with the EP/channel
- * @param USBx : Selected device
- * @param src : pointer to source buffer
- * @param ch_ep_num : endpoint or host channel number
- * @param len : Number of bytes to write
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_WritePacket(USB_TypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len)
-{
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
- return HAL_OK;
-}
-
-/**
- * @brief USB_ReadPacket : read a packet from the Tx FIFO associated
- * with the EP/channel
- * @param USBx : Selected device
- * @param dest : destination pointer
- * @param len : Number of bytes to read
- * @retval pointer to destination buffer
- */
-void *USB_ReadPacket(USB_TypeDef *USBx, uint8_t *dest, uint16_t len)
-{
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
- return ((void *)NULL);
-}
-
-/**
- * @brief USB_EPSetStall : set a stall condition over an EP
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx , USB_EPTypeDef *ep)
-{
- if (ep->num == 0)
- {
- /* This macro sets STALL status for RX & TX*/
- PCD_SET_EP_TXRX_STATUS(USBx, ep->num, USB_EP_RX_STALL, USB_EP_TX_STALL);
- }
- else
- {
- if (ep->is_in)
- {
- PCD_SET_EP_TX_STATUS(USBx, ep->num , USB_EP_TX_STALL);
- }
- else
- {
- PCD_SET_EP_RX_STATUS(USBx, ep->num , USB_EP_RX_STALL);
- }
- }
- return HAL_OK;
-}
-
-/**
- * @brief USB_EPClearStall : Clear a stall condition over an EP
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx, USB_EPTypeDef *ep)
-{
- if (ep->is_in)
- {
- PCD_CLEAR_TX_DTOG(USBx, ep->num);
- PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_VALID);
- }
- else
- {
- PCD_CLEAR_RX_DTOG(USBx, ep->num);
- PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID);
- }
- return HAL_OK;
-}
-
-/**
- * @brief USB_StopDevice : Stop the usb device mode
- * @param USBx : Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx)
-{
- /* disable all interrupts and force USB reset */
- USBx->CNTR = USB_CNTR_FRES;
-
- /* clear interrupt status register */
- USBx->ISTR = 0;
-
- /* switch-off device */
- USBx->CNTR = (USB_CNTR_FRES | USB_CNTR_PDWN);
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_SetDevAddress : Stop the usb device mode
- * @param USBx : Selected device
- * @param address : new device address to be assigned
- * This parameter can be a value from 0 to 255
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_SetDevAddress (USB_TypeDef *USBx, uint8_t address)
-{
- if(address == 0)
- {
- /* set device address and enable function */
- USBx->DADDR = USB_DADDR_EF;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_DevConnect : Connect the USB device by enabling the pull-up/pull-down
- * @param USBx : Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_DevConnect (USB_TypeDef *USBx)
-{
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
- return HAL_OK;
-}
-
-/**
- * @brief USB_DevDisconnect : Disconnect the USB device by disabling the pull-up/pull-down
- * @param USBx : Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_DevDisconnect (USB_TypeDef *USBx)
-{
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
- return HAL_OK;
-}
-
-/**
- * @brief USB_ReadInterrupts: return the global USB interrupt status
- * @param USBx : Selected device
- * @retval HAL status
- */
-uint32_t USB_ReadInterrupts (USB_TypeDef *USBx)
-{
- uint32_t tmpreg = 0;
-
- tmpreg = USBx->ISTR;
- return tmpreg;
-}
-
-/**
- * @brief USB_ReadDevAllOutEpInterrupt: return the USB device OUT endpoints interrupt status
- * @param USBx : Selected device
- * @retval HAL status
- */
-uint32_t USB_ReadDevAllOutEpInterrupt (USB_TypeDef *USBx)
-{
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
- return (0);
-}
-
-/**
- * @brief USB_ReadDevAllInEpInterrupt: return the USB device IN endpoints interrupt status
- * @param USBx : Selected device
- * @retval HAL status
- */
-uint32_t USB_ReadDevAllInEpInterrupt (USB_TypeDef *USBx)
-{
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
- return (0);
-}
-
-/**
- * @brief Returns Device OUT EP Interrupt register
- * @param USBx : Selected device
- * @param epnum : endpoint number
- * This parameter can be a value from 0 to 15
- * @retval Device OUT EP Interrupt register
- */
-uint32_t USB_ReadDevOutEPInterrupt (USB_TypeDef *USBx , uint8_t epnum)
-{
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
- return (0);
-}
-
-/**
- * @brief Returns Device IN EP Interrupt register
- * @param USBx : Selected device
- * @param epnum : endpoint number
- * This parameter can be a value from 0 to 15
- * @retval Device IN EP Interrupt register
- */
-uint32_t USB_ReadDevInEPInterrupt (USB_TypeDef *USBx , uint8_t epnum)
-{
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
- return (0);
-}
-
-/**
- * @brief USB_ClearInterrupts: clear a USB interrupt
- * @param USBx : Selected device
- * @param interrupt : interrupt flag
- * @retval None
- */
-void USB_ClearInterrupts (USB_TypeDef *USBx, uint32_t interrupt)
-{
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
-}
-
-/**
- * @brief Prepare the EP0 to start the first control setup
- * @param USBx : Selected device
- * @param psetup : pointer to setup packet
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_EP0_OutStart(USB_TypeDef *USBx, uint8_t *psetup)
-{
- /* NOTE : - This function is not required by USB Device FS peripheral, it is used
- only by USB OTG FS peripheral.
- - This function is added to ensure compatibility across platforms.
- */
- return HAL_OK;
-}
-
-/**
- * @brief USB_ActivateRemoteWakeup : active remote wakeup signalling
- * @param USBx : Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx)
-{
- USBx->CNTR |= USB_CNTR_RESUME;
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_DeActivateRemoteWakeup : de-active remote wakeup signalling
- * @param USBx : Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx)
-{
- USBx->CNTR &= ~(USB_CNTR_RESUME);
- return HAL_OK;
-}
-
-/**
- * @brief Copy a buffer from user memory area to packet memory area (PMA)
- * @param USBx : pointer to USB register.
- * @param pbUsrBuf : pointer to user memory area.
- * @param wPMABufAddr : address into PMA.
- * @param wNBytes : number of bytes to be copied.
- * @retval None
- */
-void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
-{
- uint32_t nbytes = (wNBytes + 1) >> 1; /* nbytes = (wNBytes + 1) / 2 */
- uint32_t index = 0, temp1 = 0, temp2 = 0;
- uint16_t *pdwVal = NULL;
-
- pdwVal = (uint16_t *)(wPMABufAddr * 2 + (uint32_t)USBx + 0x400);
- for (index = nbytes; index != 0; index--)
- {
- temp1 = (uint16_t) * pbUsrBuf;
- pbUsrBuf++;
- temp2 = temp1 | (uint16_t) * pbUsrBuf << 8;
- *pdwVal++ = temp2;
- pdwVal++;
- pbUsrBuf++;
- }
-}
-
-/**
- * @brief Copy a buffer from user memory area to packet memory area (PMA)
- * @param USBx : pointer to USB register.
-* @param pbUsrBuf : pointer to user memory area.
- * @param wPMABufAddr : address into PMA.
- * @param wNBytes : number of bytes to be copied.
- * @retval None
- */
-void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
-{
- uint32_t nbytes = (wNBytes + 1) >> 1;/* /2*/
- uint32_t index = 0;
- uint32_t *pdwVal = NULL;
-
- pdwVal = (uint32_t *)(wPMABufAddr * 2 + (uint32_t)USBx + 0x400);
- for (index = nbytes; index != 0; index--)
- {
- *(uint16_t*)pbUsrBuf++ = *pdwVal++;
- pbUsrBuf++;
- }
-}
-
-#endif /* USB */
-
-/**
- * @}
- */
-/**
- * @}
- */
-
-#if defined (USB_OTG_FS)
-/** @addtogroup USB_LL_Private_Functions
- * @{
- */
-/**
- * @brief Reset the USB Core (needed after USB clock settings change)
- * @param USBx : Selected device
- * @retval HAL status
- */
-static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx)
-{
- uint32_t count = 0;
-
- /* Wait for AHB master IDLE state. */
- do
- {
- if (++count > 200000)
- {
- return HAL_TIMEOUT;
- }
- }
- while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0);
-
- /* Core Soft Reset */
- count = 0;
- USBx->GRSTCTL |= USB_OTG_GRSTCTL_CSRST;
-
- do
- {
- if (++count > 200000)
- {
- return HAL_TIMEOUT;
- }
- }
- while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_CSRST) == USB_OTG_GRSTCTL_CSRST);
-
- return HAL_OK;
-}
-/**
- * @}
- */
-#endif /* USB_OTG_FS */
-
-#endif /* STM32F102x6 || STM32F102xB || */
- /* STM32F103x6 || STM32F103xB || */
- /* STM32F103xE || STM32F103xG || */
- /* STM32F105xC || STM32F107xC */
-
-#endif /* defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/