diff options
Diffstat (limited to 'stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h')
-rw-r--r-- | stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h | 887 |
1 files changed, 0 insertions, 887 deletions
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h deleted file mode 100644 index 71d8735..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h +++ /dev/null @@ -1,887 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_gpio_ex.h - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief Header file of GPIO HAL Extension module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_GPIO_EX_H -#define __STM32F1xx_HAL_GPIO_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal_def.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @defgroup GPIOEx GPIOEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants - * @{ - */ - -/** @defgroup GPIOEx_EVENTOUT EVENTOUT Cortex Configuration - * @brief This section propose definition to use the Cortex EVENTOUT signal. - * @{ - */ - -/** @defgroup GPIOEx_EVENTOUT_PIN EVENTOUT Pin - * @{ - */ - -#define AFIO_EVENTOUT_PIN_0 AFIO_EVCR_PIN_PX0 /*!< EVENTOUT on pin 0 */ -#define AFIO_EVENTOUT_PIN_1 AFIO_EVCR_PIN_PX1 /*!< EVENTOUT on pin 1 */ -#define AFIO_EVENTOUT_PIN_2 AFIO_EVCR_PIN_PX2 /*!< EVENTOUT on pin 2 */ -#define AFIO_EVENTOUT_PIN_3 AFIO_EVCR_PIN_PX3 /*!< EVENTOUT on pin 3 */ -#define AFIO_EVENTOUT_PIN_4 AFIO_EVCR_PIN_PX4 /*!< EVENTOUT on pin 4 */ -#define AFIO_EVENTOUT_PIN_5 AFIO_EVCR_PIN_PX5 /*!< EVENTOUT on pin 5 */ -#define AFIO_EVENTOUT_PIN_6 AFIO_EVCR_PIN_PX6 /*!< EVENTOUT on pin 6 */ -#define AFIO_EVENTOUT_PIN_7 AFIO_EVCR_PIN_PX7 /*!< EVENTOUT on pin 7 */ -#define AFIO_EVENTOUT_PIN_8 AFIO_EVCR_PIN_PX8 /*!< EVENTOUT on pin 8 */ -#define AFIO_EVENTOUT_PIN_9 AFIO_EVCR_PIN_PX9 /*!< EVENTOUT on pin 9 */ -#define AFIO_EVENTOUT_PIN_10 AFIO_EVCR_PIN_PX10 /*!< EVENTOUT on pin 10 */ -#define AFIO_EVENTOUT_PIN_11 AFIO_EVCR_PIN_PX11 /*!< EVENTOUT on pin 11 */ -#define AFIO_EVENTOUT_PIN_12 AFIO_EVCR_PIN_PX12 /*!< EVENTOUT on pin 12 */ -#define AFIO_EVENTOUT_PIN_13 AFIO_EVCR_PIN_PX13 /*!< EVENTOUT on pin 13 */ -#define AFIO_EVENTOUT_PIN_14 AFIO_EVCR_PIN_PX14 /*!< EVENTOUT on pin 14 */ -#define AFIO_EVENTOUT_PIN_15 AFIO_EVCR_PIN_PX15 /*!< EVENTOUT on pin 15 */ - -#define IS_AFIO_EVENTOUT_PIN(__PIN__) (((__PIN__) == AFIO_EVENTOUT_PIN_0) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_1) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_2) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_3) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_4) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_5) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_6) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_7) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_8) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_9) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_10) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_11) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_12) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_13) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_14) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_15)) -/** - * @} - */ - -/** @defgroup GPIOEx_EVENTOUT_PORT EVENTOUT Port - * @{ - */ - -#define AFIO_EVENTOUT_PORT_A AFIO_EVCR_PORT_PA /*!< EVENTOUT on port A */ -#define AFIO_EVENTOUT_PORT_B AFIO_EVCR_PORT_PB /*!< EVENTOUT on port B */ -#define AFIO_EVENTOUT_PORT_C AFIO_EVCR_PORT_PC /*!< EVENTOUT on port C */ -#define AFIO_EVENTOUT_PORT_D AFIO_EVCR_PORT_PD /*!< EVENTOUT on port D */ -#define AFIO_EVENTOUT_PORT_E AFIO_EVCR_PORT_PE /*!< EVENTOUT on port E */ - -#define IS_AFIO_EVENTOUT_PORT(__PORT__) (((__PORT__) == AFIO_EVENTOUT_PORT_A) || \ - ((__PORT__) == AFIO_EVENTOUT_PORT_B) || \ - ((__PORT__) == AFIO_EVENTOUT_PORT_C) || \ - ((__PORT__) == AFIO_EVENTOUT_PORT_D) || \ - ((__PORT__) == AFIO_EVENTOUT_PORT_E)) -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup GPIOEx_AFIO_AF_REMAPPING Alternate Function Remapping - * @brief This section propose definition to remap the alternate function to some other port/pins. - * @{ - */ - -/** - * @brief Enable the remapping of SPI1 alternate function NSS, SCK, MISO and MOSI. - * @note ENABLE: Remap (NSS/PA15, SCK/PB3, MISO/PB4, MOSI/PB5) - * @retval None - */ -#define __HAL_AFIO_REMAP_SPI1_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_SPI1_REMAP) - -/** - * @brief Disable the remapping of SPI1 alternate function NSS, SCK, MISO and MOSI. - * @note DISABLE: No remap (NSS/PA4, SCK/PA5, MISO/PA6, MOSI/PA7) - * @retval None - */ -#define __HAL_AFIO_REMAP_SPI1_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_SPI1_REMAP) - -/** - * @brief Enable the remapping of I2C1 alternate function SCL and SDA. - * @note ENABLE: Remap (SCL/PB8, SDA/PB9) - * @retval None - */ -#define __HAL_AFIO_REMAP_I2C1_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_I2C1_REMAP) - -/** - * @brief Disable the remapping of I2C1 alternate function SCL and SDA. - * @note DISABLE: No remap (SCL/PB6, SDA/PB7) - * @retval None - */ -#define __HAL_AFIO_REMAP_I2C1_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_I2C1_REMAP) - -/** - * @brief Enable the remapping of USART1 alternate function TX and RX. - * @note ENABLE: Remap (TX/PB6, RX/PB7) - * @retval None - */ -#define __HAL_AFIO_REMAP_USART1_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_USART1_REMAP) - -/** - * @brief Disable the remapping of USART1 alternate function TX and RX. - * @note DISABLE: No remap (TX/PA9, RX/PA10) - * @retval None - */ -#define __HAL_AFIO_REMAP_USART1_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_USART1_REMAP) - -/** - * @brief Enable the remapping of USART2 alternate function CTS, RTS, CK, TX and RX. - * @note ENABLE: Remap (CTS/PD3, RTS/PD4, TX/PD5, RX/PD6, CK/PD7) - * @retval None - */ -#define __HAL_AFIO_REMAP_USART2_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_USART2_REMAP) - -/** - * @brief Disable the remapping of USART2 alternate function CTS, RTS, CK, TX and RX. - * @note DISABLE: No remap (CTS/PA0, RTS/PA1, TX/PA2, RX/PA3, CK/PA4) - * @retval None - */ -#define __HAL_AFIO_REMAP_USART2_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_USART2_REMAP) - -/** - * @brief Enable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX. - * @note ENABLE: Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) - * @retval None - */ -#define __HAL_AFIO_REMAP_USART3_ENABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_USART3_REMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP) - -/** - * @brief Enable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX. - * @note PARTIAL: Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) - * @retval None - */ -#define __HAL_AFIO_REMAP_USART3_PARTIAL() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_USART3_REMAP, AFIO_MAPR_USART3_REMAP_PARTIALREMAP) - -/** - * @brief Disable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX. - * @note DISABLE: No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) - * @retval None - */ -#define __HAL_AFIO_REMAP_USART3_DISABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_USART3_REMAP, AFIO_MAPR_USART3_REMAP_NOREMAP) - -/** - * @brief Enable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN) - * @note ENABLE: Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM1_ENABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP) - -/** - * @brief Enable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN) - * @note PARTIAL: Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM1_PARTIAL() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP, AFIO_MAPR_TIM1_REMAP_PARTIALREMAP) - -/** - * @brief Disable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN) - * @note DISABLE: No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM1_DISABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP, AFIO_MAPR_TIM1_REMAP_NOREMAP) - -/** - * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) - * @note ENABLE: Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM2_ENABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP, AFIO_MAPR_TIM2_REMAP_FULLREMAP) - -/** - * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) - * @note PARTIAL_2: Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM2_PARTIAL_2() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP, AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2) - -/** - * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) - * @note PARTIAL_1: Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM2_PARTIAL_1() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP, AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1) - -/** - * @brief Disable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) - * @note DISABLE: No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM2_DISABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP, AFIO_MAPR_TIM2_REMAP_NOREMAP) - -/** - * @brief Enable the remapping of TIM3 alternate function channels 1 to 4 - * @note ENABLE: Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) - * @note TIM3_ETR on PE0 is not re-mapped. - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM3_ENABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP) - -/** - * @brief Enable the remapping of TIM3 alternate function channels 1 to 4 - * @note PARTIAL: Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) - * @note TIM3_ETR on PE0 is not re-mapped. - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM3_PARTIAL() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP, AFIO_MAPR_TIM3_REMAP_PARTIALREMAP) - -/** - * @brief Disable the remapping of TIM3 alternate function channels 1 to 4 - * @note DISABLE: No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) - * @note TIM3_ETR on PE0 is not re-mapped. - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM3_DISABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP, AFIO_MAPR_TIM3_REMAP_NOREMAP) - -/** - * @brief Enable the remapping of TIM4 alternate function channels 1 to 4. - * @note ENABLE: Full remap (TIM4_CH1/PD12, TIM4_CH2/PD13, TIM4_CH3/PD14, TIM4_CH4/PD15) - * @note TIM4_ETR on PE0 is not re-mapped. - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM4_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM4_REMAP) - -/** - * @brief Disable the remapping of TIM4 alternate function channels 1 to 4. - * @note DISABLE: No remap (TIM4_CH1/PB6, TIM4_CH2/PB7, TIM4_CH3/PB8, TIM4_CH4/PB9) - * @note TIM4_ETR on PE0 is not re-mapped. - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM4_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM4_REMAP) - -#if defined(AFIO_MAPR_CAN_REMAP_REMAP1) - -/** - * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface. - * @note CASE 1: CAN_RX mapped to PA11, CAN_TX mapped to PA12 - * @retval None - */ -#define __HAL_AFIO_REMAP_CAN1_1() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_CAN_REMAP, AFIO_MAPR_CAN_REMAP_REMAP1) - -/** - * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface. - * @note CASE 2: CAN_RX mapped to PB8, CAN_TX mapped to PB9 (not available on 36-pin package) - * @retval None - */ -#define __HAL_AFIO_REMAP_CAN1_2() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_CAN_REMAP, AFIO_MAPR_CAN_REMAP_REMAP2) - -/** - * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface. - * @note CASE 3: CAN_RX mapped to PD0, CAN_TX mapped to PD1 - * @retval None - */ -#define __HAL_AFIO_REMAP_CAN1_3() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_CAN_REMAP, AFIO_MAPR_CAN_REMAP_REMAP3) -#endif - -/** - * @brief Enable the remapping of PD0 and PD1. When the HSE oscillator is not used - * (application running on internal 8 MHz RC) PD0 and PD1 can be mapped on OSC_IN and - * OSC_OUT. This is available only on 36, 48 and 64 pins packages (PD0 and PD1 are available - * on 100-pin and 144-pin packages, no need for remapping). - * @note ENABLE: PD0 remapped on OSC_IN, PD1 remapped on OSC_OUT. - * @retval None - */ -#define __HAL_AFIO_REMAP_PD01_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_PD01_REMAP) - -/** - * @brief Disable the remapping of PD0 and PD1. When the HSE oscillator is not used - * (application running on internal 8 MHz RC) PD0 and PD1 can be mapped on OSC_IN and - * OSC_OUT. This is available only on 36, 48 and 64 pins packages (PD0 and PD1 are available - * on 100-pin and 144-pin packages, no need for remapping). - * @note DISABLE: No remapping of PD0 and PD1 - * @retval None - */ -#define __HAL_AFIO_REMAP_PD01_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_PD01_REMAP) - -#if defined(AFIO_MAPR_TIM5CH4_IREMAP) -/** - * @brief Enable the remapping of TIM5CH4. - * @note ENABLE: LSI internal clock is connected to TIM5_CH4 input for calibration purpose. - * @note This function is available only in high density value line devices. - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM5CH4_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM5CH4_IREMAP) - -/** - * @brief Disable the remapping of TIM5CH4. - * @note DISABLE: TIM5_CH4 is connected to PA3 - * @note This function is available only in high density value line devices. - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM5CH4_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM5CH4_IREMAP) -#endif - -#if defined(AFIO_MAPR_ETH_REMAP) -/** - * @brief Enable the remapping of Ethernet MAC connections with the PHY. - * @note ENABLE: Remap (RX_DV-CRS_DV/PD8, RXD0/PD9, RXD1/PD10, RXD2/PD11, RXD3/PD12) - * @note This bit is available only in connectivity line devices and is reserved otherwise. - * @retval None - */ -#define __HAL_AFIO_REMAP_ETH_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_ETH_REMAP) - -/** - * @brief Disable the remapping of Ethernet MAC connections with the PHY. - * @note DISABLE: No remap (RX_DV-CRS_DV/PA7, RXD0/PC4, RXD1/PC5, RXD2/PB0, RXD3/PB1) - * @note This bit is available only in connectivity line devices and is reserved otherwise. - * @retval None - */ -#define __HAL_AFIO_REMAP_ETH_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_ETH_REMAP) -#endif - -#if defined(AFIO_MAPR_CAN2_REMAP) - -/** - * @brief Enable the remapping of CAN2 alternate function CAN2_RX and CAN2_TX. - * @note ENABLE: Remap (CAN2_RX/PB5, CAN2_TX/PB6) - * @note This bit is available only in connectivity line devices and is reserved otherwise. - * @retval None - */ -#define __HAL_AFIO_REMAP_CAN2_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_CAN2_REMAP) - -/** - * @brief Disable the remapping of CAN2 alternate function CAN2_RX and CAN2_TX. - * @note DISABLE: No remap (CAN2_RX/PB12, CAN2_TX/PB13) - * @note This bit is available only in connectivity line devices and is reserved otherwise. - * @retval None - */ -#define __HAL_AFIO_REMAP_CAN2_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_CAN2_REMAP) -#endif - -#if defined(AFIO_MAPR_MII_RMII_SEL) -/** - * @brief Configures the Ethernet MAC internally for use with an external MII or RMII PHY. - * @note ETH_RMII: Configure Ethernet MAC for connection with an RMII PHY - * @note This bit is available only in connectivity line devices and is reserved otherwise. - * @retval None - */ -#define __HAL_AFIO_ETH_RMII() SET_BIT(AFIO->MAPR, AFIO_MAPR_MII_RMII_SEL) - -/** - * @brief Configures the Ethernet MAC internally for use with an external MII or RMII PHY. - * @note ETH_MII: Configure Ethernet MAC for connection with an MII PHY - * @note This bit is available only in connectivity line devices and is reserved otherwise. - * @retval None - */ -#define __HAL_AFIO_ETH_MII() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_MII_RMII_SEL) -#endif - -/** - * @brief Enable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion). - * @note ENABLE: ADC1 External Event injected conversion is connected to TIM8 Channel4. - * @retval None - */ -#define __HAL_AFIO_REMAP_ADC1_ETRGINJ_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_ADC1_ETRGINJ_REMAP) - -/** - * @brief Disable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion). - * @note DISABLE: ADC1 External trigger injected conversion is connected to EXTI15 - * @retval None - */ -#define __HAL_AFIO_REMAP_ADC1_ETRGINJ_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_ADC1_ETRGINJ_REMAP) - -/** - * @brief Enable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion). - * @note ENABLE: ADC1 External Event regular conversion is connected to TIM8 TRG0. - * @retval None - */ -#define __HAL_AFIO_REMAP_ADC1_ETRGREG_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_ADC1_ETRGREG_REMAP) - -/** - * @brief Disable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion). - * @note DISABLE: ADC1 External trigger regular conversion is connected to EXTI11 - * @retval None - */ -#define __HAL_AFIO_REMAP_ADC1_ETRGREG_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_ADC1_ETRGREG_REMAP) - -#if defined(AFIO_MAPR_ADC2_ETRGINJ_REMAP) - -/** - * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger injected conversion). - * @note ENABLE: ADC2 External Event injected conversion is connected to TIM8 Channel4. - * @retval None - */ -#define __HAL_AFIO_REMAP_ADC2_ETRGINJ_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_ADC2_ETRGINJ_REMAP) - -/** - * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger injected conversion). - * @note DISABLE: ADC2 External trigger injected conversion is connected to EXTI15 - * @retval None - */ -#define __HAL_AFIO_REMAP_ADC2_ETRGINJ_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_ADC2_ETRGINJ_REMAP) -#endif - -#if defined (AFIO_MAPR_ADC2_ETRGREG_REMAP) - -/** - * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion). - * @note ENABLE: ADC2 External Event regular conversion is connected to TIM8 TRG0. - * @retval None - */ -#define __HAL_AFIO_REMAP_ADC2_ETRGREG_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_ADC2_ETRGREG_REMAP) - -/** - * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion). - * @note DISABLE: ADC2 External trigger regular conversion is connected to EXTI11 - * @retval None - */ -#define __HAL_AFIO_REMAP_ADC2_ETRGREG_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_ADC2_ETRGREG_REMAP) -#endif - -/** - * @brief Enable the Serial wire JTAG configuration - * @note ENABLE: Full SWJ (JTAG-DP + SW-DP): Reset State - * @retval None - */ -#define __HAL_AFIO_REMAP_SWJ_ENABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_SWJ_CFG, AFIO_MAPR_SWJ_CFG_RESET) - -/** - * @brief Enable the Serial wire JTAG configuration - * @note NONJTRST: Full SWJ (JTAG-DP + SW-DP) but without NJTRST - * @retval None - */ -#define __HAL_AFIO_REMAP_SWJ_NONJTRST() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_SWJ_CFG, AFIO_MAPR_SWJ_CFG_NOJNTRST) - -/** - * @brief Enable the Serial wire JTAG configuration - * @note NOJTAG: JTAG-DP Disabled and SW-DP Enabled - * @retval None - */ -#define __HAL_AFIO_REMAP_SWJ_NOJTAG() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_SWJ_CFG, AFIO_MAPR_SWJ_CFG_JTAGDISABLE) - -/** - * @brief Disable the Serial wire JTAG configuration - * @note DISABLE: JTAG-DP Disabled and SW-DP Disabled - * @retval None - */ -#define __HAL_AFIO_REMAP_SWJ_DISABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_SWJ_CFG, AFIO_MAPR_SWJ_CFG_DISABLE) - -#if defined(AFIO_MAPR_SPI3_REMAP) - -/** - * @brief Enable the remapping of SPI3 alternate functions SPI3_NSS/I2S3_WS, SPI3_SCK/I2S3_CK, SPI3_MISO, SPI3_MOSI/I2S3_SD. - * @note ENABLE: Remap (SPI3_NSS-I2S3_WS/PA4, SPI3_SCK-I2S3_CK/PC10, SPI3_MISO/PC11, SPI3_MOSI-I2S3_SD/PC12) - * @note This bit is available only in connectivity line devices and is reserved otherwise. - * @retval None - */ -#define __HAL_AFIO_REMAP_SPI3_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_SPI3_REMAP) - -/** - * @brief Disable the remapping of SPI3 alternate functions SPI3_NSS/I2S3_WS, SPI3_SCK/I2S3_CK, SPI3_MISO, SPI3_MOSI/I2S3_SD. - * @note DISABLE: No remap (SPI3_NSS-I2S3_WS/PA15, SPI3_SCK-I2S3_CK/PB3, SPI3_MISO/PB4, SPI3_MOSI-I2S3_SD/PB5). - * @note This bit is available only in connectivity line devices and is reserved otherwise. - * @retval None - */ -#define __HAL_AFIO_REMAP_SPI3_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_SPI3_REMAP) -#endif - -#if defined(AFIO_MAPR_TIM2ITR1_IREMAP) - -/** - * @brief Control of TIM2_ITR1 internal mapping. - * @note TO_USB: Connect USB OTG SOF (Start of Frame) output to TIM2_ITR1 for calibration purposes. - * @note This bit is available only in connectivity line devices and is reserved otherwise. - * @retval None - */ -#define __HAL_AFIO_TIM2ITR1_TO_USB() SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM2ITR1_IREMAP) - -/** - * @brief Control of TIM2_ITR1 internal mapping. - * @note TO_ETH: Connect TIM2_ITR1 internally to the Ethernet PTP output for calibration purposes. - * @note This bit is available only in connectivity line devices and is reserved otherwise. - * @retval None - */ -#define __HAL_AFIO_TIM2ITR1_TO_ETH() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM2ITR1_IREMAP) -#endif - -#if defined(AFIO_MAPR_PTP_PPS_REMAP) - -/** - * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion). - * @note ENABLE: PTP_PPS is output on PB5 pin. - * @note This bit is available only in connectivity line devices and is reserved otherwise. - * @retval None - */ -#define __HAL_AFIO_ETH_PTP_PPS_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_PTP_PPS_REMAP) - -/** - * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion). - * @note DISABLE: PTP_PPS not output on PB5 pin. - * @note This bit is available only in connectivity line devices and is reserved otherwise. - * @retval None - */ -#define __HAL_AFIO_ETH_PTP_PPS_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_PTP_PPS_REMAP) -#endif - -#if defined(AFIO_MAPR2_TIM9_REMAP) - -/** - * @brief Enable the remapping of TIM9_CH1 and TIM9_CH2. - * @note ENABLE: Remap (TIM9_CH1 on PE5 and TIM9_CH2 on PE6). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM9_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM9_REMAP) - -/** - * @brief Disable the remapping of TIM9_CH1 and TIM9_CH2. - * @note DISABLE: No remap (TIM9_CH1 on PA2 and TIM9_CH2 on PA3). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM9_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM9_REMAP) -#endif - -#if defined(AFIO_MAPR2_TIM10_REMAP) - -/** - * @brief Enable the remapping of TIM10_CH1. - * @note ENABLE: Remap (TIM10_CH1 on PF6). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM10_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM10_REMAP) - -/** - * @brief Disable the remapping of TIM10_CH1. - * @note DISABLE: No remap (TIM10_CH1 on PB8). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM10_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM10_REMAP) -#endif - -#if defined(AFIO_MAPR2_TIM11_REMAP) -/** - * @brief Enable the remapping of TIM11_CH1. - * @note ENABLE: Remap (TIM11_CH1 on PF7). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM11_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM11_REMAP) - -/** - * @brief Disable the remapping of TIM11_CH1. - * @note DISABLE: No remap (TIM11_CH1 on PB9). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM11_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM11_REMAP) -#endif - -#if defined(AFIO_MAPR2_TIM13_REMAP) - -/** - * @brief Enable the remapping of TIM13_CH1. - * @note ENABLE: Remap STM32F100:(TIM13_CH1 on PF8). Others:(TIM13_CH1 on PB0). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM13_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM13_REMAP) - -/** - * @brief Disable the remapping of TIM13_CH1. - * @note DISABLE: No remap STM32F100:(TIM13_CH1 on PA6). Others:(TIM13_CH1 on PC8). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM13_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM13_REMAP) -#endif - -#if defined(AFIO_MAPR2_TIM14_REMAP) - -/** - * @brief Enable the remapping of TIM14_CH1. - * @note ENABLE: Remap STM32F100:(TIM14_CH1 on PB1). Others:(TIM14_CH1 on PF9). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM14_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM14_REMAP) - -/** - * @brief Disable the remapping of TIM14_CH1. - * @note DISABLE: No remap STM32F100:(TIM14_CH1 on PC9). Others:(TIM14_CH1 on PA7). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM14_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM14_REMAP) -#endif - -#if defined(AFIO_MAPR2_FSMC_NADV_REMAP) - -/** - * @brief Controls the use of the optional FSMC_NADV signal. - * @note DISCONNECTED: The NADV signal is not connected. The I/O pin can be used by another peripheral. - * @retval None - */ -#define __HAL_AFIO_FSMCNADV_DISCONNECTED() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_FSMC_NADV_REMAP) - -/** - * @brief Controls the use of the optional FSMC_NADV signal. - * @note CONNECTED: The NADV signal is connected to the output (default). - * @retval None - */ -#define __HAL_AFIO_FSMCNADV_CONNECTED() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_FSMC_NADV_REMAP) -#endif - -#if defined(AFIO_MAPR2_TIM15_REMAP) - -/** - * @brief Enable the remapping of TIM15_CH1 and TIM15_CH2. - * @note ENABLE: Remap (TIM15_CH1 on PB14 and TIM15_CH2 on PB15). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM15_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM15_REMAP) - -/** - * @brief Disable the remapping of TIM15_CH1 and TIM15_CH2. - * @note DISABLE: No remap (TIM15_CH1 on PA2 and TIM15_CH2 on PA3). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM15_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM15_REMAP) -#endif - -#if defined(AFIO_MAPR2_TIM16_REMAP) - -/** - * @brief Enable the remapping of TIM16_CH1. - * @note ENABLE: Remap (TIM16_CH1 on PA6). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM16_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM16_REMAP) - -/** - * @brief Disable the remapping of TIM16_CH1. - * @note DISABLE: No remap (TIM16_CH1 on PB8). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM16_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM16_REMAP) -#endif - -#if defined(AFIO_MAPR2_TIM17_REMAP) - -/** - * @brief Enable the remapping of TIM17_CH1. - * @note ENABLE: Remap (TIM17_CH1 on PA7). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM17_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM17_REMAP) - -/** - * @brief Disable the remapping of TIM17_CH1. - * @note DISABLE: No remap (TIM17_CH1 on PB9). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM17_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM17_REMAP) -#endif - -#if defined(AFIO_MAPR2_CEC_REMAP) - -/** - * @brief Enable the remapping of CEC. - * @note ENABLE: Remap (CEC on PB10). - * @retval None - */ -#define __HAL_AFIO_REMAP_CEC_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_CEC_REMAP) - -/** - * @brief Disable the remapping of CEC. - * @note DISABLE: No remap (CEC on PB8). - * @retval None - */ -#define __HAL_AFIO_REMAP_CEC_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_CEC_REMAP) -#endif - -#if defined(AFIO_MAPR2_TIM1_DMA_REMAP) - -/** - * @brief Controls the mapping of the TIM1_CH1 TIM1_CH2 DMA requests onto the DMA1 channels. - * @note ENABLE: Remap (TIM1_CH1 DMA request/DMA1 Channel6, TIM1_CH2 DMA request/DMA1 Channel6) - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM1DMA_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM1_DMA_REMAP) - -/** - * @brief Controls the mapping of the TIM1_CH1 TIM1_CH2 DMA requests onto the DMA1 channels. - * @note DISABLE: No remap (TIM1_CH1 DMA request/DMA1 Channel2, TIM1_CH2 DMA request/DMA1 Channel3). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM1DMA_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM1_DMA_REMAP) -#endif - -#if defined(AFIO_MAPR2_TIM67_DAC_DMA_REMAP) - -/** - * @brief Controls the mapping of the TIM6_DAC1 and TIM7_DAC2 DMA requests onto the DMA1 channels. - * @note ENABLE: Remap (TIM6_DAC1 DMA request/DMA1 Channel3, TIM7_DAC2 DMA request/DMA1 Channel4) - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM67DACDMA_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM67_DAC_DMA_REMAP) - -/** - * @brief Controls the mapping of the TIM6_DAC1 and TIM7_DAC2 DMA requests onto the DMA1 channels. - * @note DISABLE: No remap (TIM6_DAC1 DMA request/DMA2 Channel3, TIM7_DAC2 DMA request/DMA2 Channel4) - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM67DACDMA_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM67_DAC_DMA_REMAP) -#endif - -#if defined(AFIO_MAPR2_TIM12_REMAP) - -/** - * @brief Enable the remapping of TIM12_CH1 and TIM12_CH2. - * @note ENABLE: Remap (TIM12_CH1 on PB12 and TIM12_CH2 on PB13). - * @note This bit is available only in high density value line devices. - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM12_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM12_REMAP) - -/** - * @brief Disable the remapping of TIM12_CH1 and TIM12_CH2. - * @note DISABLE: No remap (TIM12_CH1 on PC4 and TIM12_CH2 on PC5). - * @note This bit is available only in high density value line devices. - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM12_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM12_REMAP) -#endif - -#if defined(AFIO_MAPR2_MISC_REMAP) - -/** - * @brief Miscellaneous features remapping. - * This bit is set and cleared by software. It controls miscellaneous features. - * The DMA2 channel 5 interrupt position in the vector table. - * The timer selection for DAC trigger 3 (TSEL[2:0] = 011, for more details refer to the DAC_CR register). - * @note ENABLE: DMA2 channel 5 interrupt is mapped separately at position 60 and TIM15 TRGO event is - * selected as DAC Trigger 3, TIM15 triggers TIM1/3. - * @note This bit is available only in high density value line devices. - * @retval None - */ -#define __HAL_AFIO_REMAP_MISC_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_MISC_REMAP) - -/** - * @brief Miscellaneous features remapping. - * This bit is set and cleared by software. It controls miscellaneous features. - * The DMA2 channel 5 interrupt position in the vector table. - * The timer selection for DAC trigger 3 (TSEL[2:0] = 011, for more details refer to the DAC_CR register). - * @note DISABLE: DMA2 channel 5 interrupt is mapped with DMA2 channel 4 at position 59, TIM5 TRGO - * event is selected as DAC Trigger 3, TIM5 triggers TIM1/3. - * @note This bit is available only in high density value line devices. - * @retval None - */ -#define __HAL_AFIO_REMAP_MISC_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_MISC_REMAP) -#endif - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup GPIOEx_Private_Macros GPIOEx Private Macros - * @{ - */ -#if defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) -#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :3U) -#elif defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F103xB) || defined(STM32F105xC) || defined(STM32F107xC) -#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U :4U) -#elif defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG) -#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U :\ - ((__GPIOx__) == (GPIOE))? 4U :\ - ((__GPIOx__) == (GPIOF))? 5U :6U) -#endif - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup GPIOEx_Exported_Functions - * @{ - */ - -/** @addtogroup GPIOEx_Exported_Functions_Group1 - * @{ - */ -void HAL_GPIOEx_ConfigEventout(uint32_t GPIO_PortSource, uint32_t GPIO_PinSource); -void HAL_GPIOEx_EnableEventout(void); -void HAL_GPIOEx_DisableEventout(void); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F1xx_HAL_GPIO_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |