diff options
Diffstat (limited to 'stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h')
| -rw-r--r-- | stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h | 152 |
1 files changed, 76 insertions, 76 deletions
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h index d9d59f5..3579c3d 100644 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h +++ b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h @@ -63,10 +63,10 @@ /** @defgroup USB_LL_Exported_Types USB Low Layer Exported Types * @{ */ -/** - * @brief USB Mode definition +/** + * @brief USB Mode definition */ -typedef enum +typedef enum { USB_DEVICE_MODE = 0, USB_HOST_MODE = 1, @@ -86,7 +86,7 @@ typedef enum { URB_STALL }USB_OTG_URBStateTypeDef; -/** +/** * @brief Host channel States definition */ typedef enum { @@ -96,36 +96,36 @@ typedef enum { HC_NAK, HC_NYET, HC_STALL, - HC_XACTERR, - HC_BBLERR, + HC_XACTERR, + HC_BBLERR, HC_DATATGLERR }USB_OTG_HCStateTypeDef; -/** - * @brief USB OTG Initialization Structure definition +/** + * @brief USB OTG Initialization Structure definition */ typedef struct { uint32_t dev_endpoints; /*!< Device Endpoints number. This parameter depends on the used USB core. This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - + uint32_t Host_channels; /*!< Host Channels number. - This parameter Depends on the used USB core. + This parameter Depends on the used USB core. This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - + uint32_t speed; /*!< USB Core speed. This parameter can be any value of @ref USB_Core_Speed_ */ - - uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. + + uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. This parameter can be any value of @ref USB_EP0_MPS_ */ - + uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ - + uint32_t low_power_enable; /*!< Enable or disable the low power mode. */ - + uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */ - + uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */ }USB_OTG_CfgTypeDef; @@ -133,34 +133,34 @@ typedef struct { uint8_t num; /*!< Endpoint number This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - + uint8_t is_in; /*!< Endpoint direction This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - + uint8_t is_stall; /*!< Endpoint stall condition This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - + uint8_t type; /*!< Endpoint type This parameter can be any value of @ref USB_EP_Type_ */ - + uint8_t data_pid_start; /*!< Initial data PID This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - + uint8_t even_odd_frame; /*!< IFrame parity This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - + uint16_t tx_fifo_num; /*!< Transmission FIFO number This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - + uint32_t maxpacket; /*!< Endpoint Max packet size This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ - + uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ - + uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */ - + uint32_t xfer_len; /*!< Current transfer length */ - + uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ }USB_OTG_EPTypeDef; @@ -168,81 +168,81 @@ typedef struct { uint8_t dev_addr ; /*!< USB device address. This parameter must be a number between Min_Data = 1 and Max_Data = 255 */ - + uint8_t ch_num; /*!< Host channel number. This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - + uint8_t ep_num; /*!< Endpoint number. This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - + uint8_t ep_is_in; /*!< Endpoint direction This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - + uint8_t speed; /*!< USB Host speed. This parameter can be any value of @ref USB_Core_Speed_ */ - + uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */ - + uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */ - + uint8_t ep_type; /*!< Endpoint Type. This parameter can be any value of @ref USB_EP_Type_ */ - + uint16_t max_packet; /*!< Endpoint Max packet size. This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ - + uint8_t data_pid; /*!< Initial data PID. This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - + uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */ - + uint32_t xfer_len; /*!< Current transfer length. */ - + uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */ - + uint8_t toggle_in; /*!< IN transfer current toggle flag. This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - + uint8_t toggle_out; /*!< OUT transfer current toggle flag This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - + uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */ - + uint32_t ErrCnt; /*!< Host channel error count.*/ - + USB_OTG_URBStateTypeDef urb_state; /*!< URB state. This parameter can be any value of @ref USB_OTG_URBStateTypeDef */ - + USB_OTG_HCStateTypeDef state; /*!< Host Channel state. This parameter can be any value of @ref USB_OTG_HCStateTypeDef */ }USB_OTG_HCTypeDef; #endif /* USB_OTG_FS */ #if defined (USB) -/** - * @brief USB Initialization Structure definition +/** + * @brief USB Initialization Structure definition */ typedef struct { uint32_t dev_endpoints; /*!< Device Endpoints number. - This parameter depends on the used USB core. + This parameter depends on the used USB core. This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - + uint32_t speed; /*!< USB Core speed. This parameter can be any value of @ref USB_Core_Speed */ - - uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. + + uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. This parameter can be any value of @ref USB_EP0_MPS */ - + uint32_t phy_itface; /*!< Select the used PHY interface. This parameter can be any value of @ref USB_Core_PHY */ - + uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ - + uint32_t low_power_enable; /*!< Enable or disable Low Power mode */ - + uint32_t lpm_enable; /*!< Enable or disable Battery charging. */ - + uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */ } USB_CfgTypeDef; @@ -250,39 +250,39 @@ typedef struct { uint8_t num; /*!< Endpoint number This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - + uint8_t is_in; /*!< Endpoint direction This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - + uint8_t is_stall; /*!< Endpoint stall condition This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - + uint8_t type; /*!< Endpoint type This parameter can be any value of @ref USB_EP_Type */ - + uint16_t pmaadress; /*!< PMA Address This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ - + uint16_t pmaaddr0; /*!< PMA Address0 This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ - + uint16_t pmaaddr1; /*!< PMA Address1 This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ - + uint8_t doublebuffer; /*!< Double buffer enable This parameter can be 0 or 1 */ - - uint16_t tx_fifo_num; /*!< This parameter is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral + + uint16_t tx_fifo_num; /*!< This parameter is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral This parameter is added to ensure compatibility across USB peripherals */ - + uint32_t maxpacket; /*!< Endpoint Max packet size This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ - + uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ - + uint32_t xfer_len; /*!< Current transfer length */ - + uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ } USB_EPTypeDef; @@ -447,7 +447,7 @@ typedef struct #define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)((uint32_t)USBx + USB_OTG_HOST_CHANNEL_BASE + (i)*USB_OTG_HOST_CHANNEL_SIZE)) #endif /* USB_OTG_FS */ -#if defined (USB) +#if defined (USB) /** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS * @{ */ @@ -457,7 +457,7 @@ typedef struct #define DEP0CTL_MPS_8 3 /** * @} - */ + */ /** @defgroup USB_LL_EP_Type USB Low Layer EP Type * @{ @@ -469,7 +469,7 @@ typedef struct #define EP_TYPE_MSK 3 /** * @} - */ + */ #define BTABLE_ADDRESS (0x000) #endif /* USB */ @@ -537,7 +537,7 @@ HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx); HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state); uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx); uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, +HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num, uint8_t epnum, uint8_t dev_address, @@ -595,7 +595,7 @@ void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, ui /** * @} - */ + */ /** * @} |