diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/components/libraries/util/sdk_errors.h')
| -rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/components/libraries/util/sdk_errors.h | 167 |
1 files changed, 167 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/libraries/util/sdk_errors.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/libraries/util/sdk_errors.h new file mode 100644 index 0000000..7b5dea5 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/libraries/util/sdk_errors.h @@ -0,0 +1,167 @@ +/** + * Copyright (c) 2013 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +/**@file + * + * @defgroup sdk_error SDK Error codes + * @{ + * @ingroup app_common + * @{ + * @details Error codes are 32-bit unsigned integers with the most significant 16-bit reserved for + * identifying the module where the error occurred while the least least significant LSB + * are used to provide the cause or nature of error. Each module is assigned a 16-bit + * unsigned integer. Which it will use to identify all errors that occurred in it. 16-bit + * LSB range is with module id as the MSB in the 32-bit error code is reserved for the + * module. As an example, if 0x8800 identifies a certain SDK module, all values from + * 0x88000000 - 0x8800FFFF are reserved for this module. + * It should be noted that common error reasons have been assigned values to make it + * possible to decode error reason easily. As an example, lets module uninitialized has + * been assigned an error code 0x000A0. Then, if application encounters an error code + * 0xZZZZ00A0, it knows that it accessing a certain module without initializing it. + * Apart from this, each module is allowed to define error codes that are not covered by + * the common ones, however, these values are defined in a range that does not conflict + * with common error values. For module, specific error however, it is possible that the + * same error value is used by two different modules to indicated errors of very different + * nature. If error is already defined by the NRF common error codes, these are reused. + * A range is reserved for application as well, it can use this range for defining + * application specific errors. + * + * @note Success code, NRF_SUCCESS, does not include any module identifier. + + */ + +#ifndef SDK_ERRORS_H__ +#define SDK_ERRORS_H__ + +#include <stdint.h> +#include "nrf_error.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @defgroup sdk_err_base Base defined for SDK Modules + * @{ + */ +#define NRF_ERROR_SDK_ERROR_BASE (NRF_ERROR_BASE_NUM + 0x8000) /**< Base value defined for SDK module identifiers. */ +#define NRF_ERROR_SDK_COMMON_ERROR_BASE (NRF_ERROR_BASE_NUM + 0x0080) /**< Base error value to be used for SDK error values. */ +/** @} */ + +/** + * @defgroup sdk_module_codes Codes reserved as identification for module where the error occurred. + * @{ + */ +#define NRF_ERROR_MEMORY_MANAGER_ERR_BASE (0x8100) /**< Base address for Memory Manager related errors. */ +#define NRF_ERROR_PERIPH_DRIVERS_ERR_BASE (0x8200) /**< Base address for Peripheral drivers related errors. */ +#define NRF_ERROR_GAZELLE_ERR_BASE (0x8300) /**< Base address for Gazelle related errors. */ +#define NRF_ERROR_BLE_IPSP_ERR_BASE (0x8400) /**< Base address for BLE IPSP related errors. */ +#define NRF_ERROR_CRYPTO_ERR_BASE (0x8500) /**< Base address for crypto related errors. */ +/** @} */ + + +/** + * @defgroup sdk_iot_errors Codes reserved as identification for IoT errors. + * @{ + */ +#define NRF_ERROR_IOT_ERR_BASE_START (0xA000) +#define NRF_ERROR_IOT_ERR_BASE_STOP (0xAFFF) +/** @} */ + + +/** + * @defgroup sdk_common_errors Codes reserved as identification for common errors. + * @{ + */ +#define NRF_ERROR_MODULE_NOT_INITIALIZED (NRF_ERROR_SDK_COMMON_ERROR_BASE + 0x0000) ///< Module not initialized +#define NRF_ERROR_MUTEX_INIT_FAILED (NRF_ERROR_SDK_COMMON_ERROR_BASE + 0x0001) ///< Mutex initialization failed +#define NRF_ERROR_MUTEX_LOCK_FAILED (NRF_ERROR_SDK_COMMON_ERROR_BASE + 0x0002) ///< Mutex lock failed +#define NRF_ERROR_MUTEX_UNLOCK_FAILED (NRF_ERROR_SDK_COMMON_ERROR_BASE + 0x0003) ///< Mutex unlock failed +#define NRF_ERROR_MUTEX_COND_INIT_FAILED (NRF_ERROR_SDK_COMMON_ERROR_BASE + 0x0004) ///< Mutex conditional initialization failed +#define NRF_ERROR_MODULE_ALREADY_INITIALIZED (NRF_ERROR_SDK_COMMON_ERROR_BASE + 0x0005) ///< Module already initialized +#define NRF_ERROR_STORAGE_FULL (NRF_ERROR_SDK_COMMON_ERROR_BASE + 0x0006) ///< Storage full +#define NRF_ERROR_API_NOT_IMPLEMENTED (NRF_ERROR_SDK_COMMON_ERROR_BASE + 0x0010) ///< API not implemented +#define NRF_ERROR_FEATURE_NOT_ENABLED (NRF_ERROR_SDK_COMMON_ERROR_BASE + 0x0011) ///< Feature not enabled +#define NRF_ERROR_IO_PENDING (NRF_ERROR_SDK_COMMON_ERROR_BASE + 0x0012) ///< Input/Output pending +/** @} */ + + +/** + * @defgroup drv_specific_errors Error / status codes specific to drivers. + * @{ + */ +#define NRF_ERROR_DRV_TWI_ERR_OVERRUN (NRF_ERROR_PERIPH_DRIVERS_ERR_BASE + 0x0000) +#define NRF_ERROR_DRV_TWI_ERR_ANACK (NRF_ERROR_PERIPH_DRIVERS_ERR_BASE + 0x0001) +#define NRF_ERROR_DRV_TWI_ERR_DNACK (NRF_ERROR_PERIPH_DRIVERS_ERR_BASE + 0x0002) +/** @} */ + + +/** + * @defgroup ble_ipsp_errors IPSP codes + * @brief Error and status codes specific to IPSP. + * @{ + */ +#define NRF_ERROR_BLE_IPSP_RX_PKT_TRUNCATED (NRF_ERROR_BLE_IPSP_ERR_BASE + 0x0000) +#define NRF_ERROR_BLE_IPSP_CHANNEL_ALREADY_EXISTS (NRF_ERROR_BLE_IPSP_ERR_BASE + 0x0001) +#define NRF_ERROR_BLE_IPSP_LINK_DISCONNECTED (NRF_ERROR_BLE_IPSP_ERR_BASE + 0x0002) +#define NRF_ERROR_BLE_IPSP_PEER_REJECTED (NRF_ERROR_BLE_IPSP_ERR_BASE + 0x0003) +/* @} */ + + +/** + * @brief API Result. + * + * @details Indicates success or failure of an API procedure. In case of failure, a comprehensive + * error code indicating cause or reason for failure is provided. + * + * Though called an API result, it could used in Asynchronous notifications callback along + * with asynchronous callback as event result. This mechanism is employed when an event + * marks the end of procedure initiated using API. API result, in this case, will only be + * an indicative of whether the procedure has been requested successfully. + */ +typedef uint32_t ret_code_t; + +/** @} */ +/** @} */ + +#ifdef __cplusplus +} +#endif + +#endif // SDK_ERRORS_H__ |