diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040')
10 files changed, 5000 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/arm4/dfu_experimental_dual_bank_ant_pca10040_s212.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/arm4/dfu_experimental_dual_bank_ant_pca10040_s212.uvopt new file mode 100644 index 0000000..9563c09 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/arm4/dfu_experimental_dual_bank_ant_pca10040_s212.uvopt @@ -0,0 +1,31 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?> +<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd"> + + <SchemaVersion>1.0</SchemaVersion> + + <Header>### uVision Project, (C) Keil Software</Header> + <Target> + <TargetName>nrf52832_xxaa_s212</TargetName> + <ToolsetNumber>0x4</ToolsetNumber> + <ToolsetName>ARM-ADS</ToolsetName> + <TargetOption> <OPTFL> + <IsCurrentTarget>1</IsCurrentTarget> + </OPTFL> <DebugOpt> + <pMon>Segger\JL2CM3.dll</pMon> + </DebugOpt> + <TargetDriverDllRegistry> + <SetRegEntry> + <Number>0</Number> + <Key>JL2CM3</Key> + <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name> + </SetRegEntry> + <SetRegEntry> + <Number>0</Number> + <Key>UL2CM3</Key> + <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name> + </SetRegEntry> + </TargetDriverDllRegistry> + </TargetOption> + </Target></ProjectOpt> + + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/arm4/dfu_experimental_dual_bank_ant_pca10040_s212.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/arm4/dfu_experimental_dual_bank_ant_pca10040_s212.uvproj new file mode 100644 index 0000000..2708ca8 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/arm4/dfu_experimental_dual_bank_ant_pca10040_s212.uvproj @@ -0,0 +1,536 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?> +<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd"> + + <SchemaVersion>1.1</SchemaVersion> + + <Header>### uVision Project, (C) Keil Software</Header> + + <Targets> <Target> + <TargetName>nrf52832_xxaa_s212</TargetName> + <ToolsetNumber>0x4</ToolsetNumber> + <ToolsetName>ARM-ADS</ToolsetName> + <TargetOption> + <TargetCommonOption> + <Device>nRF52832_xxAA</Device> + <Vendor>Nordic Semiconductor</Vendor> + <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu> + <FlashUtilSpec></FlashUtilSpec> + <StartupFile></StartupFile> + <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll> + <DeviceId>0</DeviceId> + <RegisterFile>core.h</RegisterFile> + <MemoryEnv></MemoryEnv> + <Cmp></Cmp> + <Asm></Asm> + <Linker></Linker> + <OHString></OHString> + <InfinionOptionDll></InfinionOptionDll> + <SLE66CMisc></SLE66CMisc> + <SLE66AMisc></SLE66AMisc> + <SLE66LinkerMisc></SLE66LinkerMisc> + <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile> + <bCustSvd>0</bCustSvd> + <UseEnv>0</UseEnv> + <BinPath></BinPath> + <IncludePath></IncludePath> + <LibPath></LibPath> + <RegisterFilePath></RegisterFilePath> + <DBRegisterFilePath></DBRegisterFilePath> + <TargetStatus> + <Error>0</Error> + <ExitCodeStop>0</ExitCodeStop> + <ButtonStop>0</ButtonStop> + <NotGenerated>0</NotGenerated> + <InvalidFlash>1</InvalidFlash> + </TargetStatus> + <OutputDirectory>.\_build\</OutputDirectory> + <OutputName>nrf52832_xxaa_s212</OutputName> + <CreateExecutable>1</CreateExecutable> + <CreateLib>0</CreateLib> + <CreateHexFile>1</CreateHexFile> + <DebugInformation>1</DebugInformation> + <BrowseInformation>1</BrowseInformation> + <ListingPath>.\_build\</ListingPath> + <HexFormatSelection>1</HexFormatSelection> + <Merge32K>0</Merge32K> + <CreateBatchFile>0</CreateBatchFile> + <BeforeCompile> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + <nStopU1X>0</nStopU1X> + <nStopU2X>0</nStopU2X> + </BeforeCompile> + <BeforeMake> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + </BeforeMake> + <AfterMake> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + </AfterMake> + <SelectedForBatchBuild>0</SelectedForBatchBuild> + <SVCSIdString></SVCSIdString> + </TargetCommonOption> + <CommonProperty> + <UseCPPCompiler>0</UseCPPCompiler> + <RVCTCodeConst>0</RVCTCodeConst> + <RVCTZI>0</RVCTZI> + <RVCTOtherData>0</RVCTOtherData> + <ModuleSelection>0</ModuleSelection> + <IncludeInBuild>1</IncludeInBuild> + <AlwaysBuild>0</AlwaysBuild> + <GenerateAssemblyFile>0</GenerateAssemblyFile> + <AssembleAssemblyFile>0</AssembleAssemblyFile> + <PublicsOnly>0</PublicsOnly> + <StopOnExitCode>3</StopOnExitCode> + <CustomArgument></CustomArgument> + <IncludeLibraryModules></IncludeLibraryModules> + <ComprImg>1</ComprImg> + </CommonProperty> + <DllOption> + <SimDllName></SimDllName> + <SimDllArguments></SimDllArguments> + <SimDlgDll></SimDlgDll> + <SimDlgDllArguments></SimDlgDllArguments> + <TargetDllName>SARMCM3.DLL</TargetDllName> + <TargetDllArguments>-MPU</TargetDllArguments> + <TargetDlgDll>TCM.DLL</TargetDlgDll> + <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments> + </DllOption> + <DebugOption> + <OPTHX> + <HexSelection>1</HexSelection> + <HexRangeLowAddress>0</HexRangeLowAddress> + <HexRangeHighAddress>0</HexRangeHighAddress> + <HexOffset>0</HexOffset> + <Oh166RecLen>16</Oh166RecLen> + </OPTHX> + <Simulator> + <UseSimulator>0</UseSimulator> + <LoadApplicationAtStartup>1</LoadApplicationAtStartup> + <RunToMain>1</RunToMain> + <RestoreBreakpoints>1</RestoreBreakpoints> + <RestoreWatchpoints>1</RestoreWatchpoints> + <RestoreMemoryDisplay>1</RestoreMemoryDisplay> + <RestoreFunctions>1</RestoreFunctions> + <RestoreToolbox>1</RestoreToolbox> + <LimitSpeedToRealTime>0</LimitSpeedToRealTime> + </Simulator> + <Target> + <UseTarget>1</UseTarget> + <LoadApplicationAtStartup>1</LoadApplicationAtStartup> + <RunToMain>0</RunToMain> + <RestoreBreakpoints>1</RestoreBreakpoints> + <RestoreWatchpoints>1</RestoreWatchpoints> + <RestoreMemoryDisplay>1</RestoreMemoryDisplay> + <RestoreFunctions>0</RestoreFunctions> + <RestoreToolbox>1</RestoreToolbox> + <RestoreTracepoints>0</RestoreTracepoints> + </Target> + <RunDebugAfterBuild>0</RunDebugAfterBuild> + <TargetSelection>-1</TargetSelection> + <SimDlls> + <CpuDll></CpuDll> + <CpuDllArguments></CpuDllArguments> + <PeripheralDll></PeripheralDll> + <PeripheralDllArguments></PeripheralDllArguments> + <InitializationFile></InitializationFile> + </SimDlls> + <TargetDlls> + <CpuDll></CpuDll> + <CpuDllArguments></CpuDllArguments> + <PeripheralDll></PeripheralDll> + <PeripheralDllArguments></PeripheralDllArguments> + <InitializationFile></InitializationFile> + <Driver>Segger\JL2CM3.dll</Driver> + </TargetDlls> + </DebugOption> + <Utilities> + <Flash1> + <UseTargetDll>1</UseTargetDll> + <UseExternalTool>0</UseExternalTool> + <RunIndependent>0</RunIndependent> + <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging> + <Capability>1</Capability> + <DriverSelection>4099</DriverSelection> + </Flash1> + <bUseTDR>1</bUseTDR> + <Flash2>Segger\JL2CM3.dll</Flash2> + <Flash3></Flash3> + <Flash4></Flash4> + </Utilities> + <TargetArmAds> + <ArmAdsMisc> + <GenerateListings>0</GenerateListings> + <asHll>1</asHll> + <asAsm>1</asAsm> + <asMacX>1</asMacX> + <asSyms>1</asSyms> + <asFals>1</asFals> + <asDbgD>1</asDbgD> + <asForm>1</asForm> + <ldLst>0</ldLst> + <ldmm>1</ldmm> + <ldXref>1</ldXref> + <BigEnd>0</BigEnd> + <AdsALst>1</AdsALst> + <AdsACrf>1</AdsACrf> + <AdsANop>0</AdsANop> + <AdsANot>0</AdsANot> + <AdsLLst>1</AdsLLst> + <AdsLmap>1</AdsLmap> + <AdsLcgr>1</AdsLcgr> + <AdsLsym>1</AdsLsym> + <AdsLszi>1</AdsLszi> + <AdsLtoi>1</AdsLtoi> + <AdsLsun>1</AdsLsun> + <AdsLven>1</AdsLven> + <AdsLsxf>1</AdsLsxf> + <RvctClst>0</RvctClst> + <GenPPlst>0</GenPPlst> + <AdsCpuType>"Cortex-M4"</AdsCpuType> + <RvctDeviceName></RvctDeviceName> + <mOS>0</mOS> + <uocRom>0</uocRom> + <uocRam>0</uocRam> + <hadIROM>1</hadIROM> + <hadIRAM>1</hadIRAM> + <hadXRAM>0</hadXRAM> + <uocXRam>0</uocXRam> + <RvdsVP>2</RvdsVP> + <hadIRAM2>0</hadIRAM2> + <hadIROM2>0</hadIROM2> + <StupSel>8</StupSel> + <useUlib>1</useUlib> + <EndSel>0</EndSel> + <uLtcg>0</uLtcg> + <RoSelD>3</RoSelD> + <RwSelD>5</RwSelD> + <CodeSel>0</CodeSel> + <OptFeed>0</OptFeed> + <NoZi1>0</NoZi1> + <NoZi2>0</NoZi2> + <NoZi3>0</NoZi3> + <NoZi4>0</NoZi4> + <NoZi5>0</NoZi5> + <Ro1Chk>0</Ro1Chk> + <Ro2Chk>0</Ro2Chk> + <Ro3Chk>0</Ro3Chk> + <Ir1Chk>1</Ir1Chk> + <Ir2Chk>0</Ir2Chk> + <Ra1Chk>0</Ra1Chk> + <Ra2Chk>0</Ra2Chk> + <Ra3Chk>0</Ra3Chk> + <Im1Chk>1</Im1Chk> + <Im2Chk>0</Im2Chk> + <OnChipMemories> + <Ocm1> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm1> + <Ocm2> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm2> + <Ocm3> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm3> + <Ocm4> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm4> + <Ocm5> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm5> + <Ocm6> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm6> + <IRAM> + <Type>0</Type> + <StartAddress>0x20000000</StartAddress> + <Size>0x10000</Size> + </IRAM> + <IROM> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x80000</Size> + </IROM> + <XRAM> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </XRAM> + <OCR_RVCT1> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT1> + <OCR_RVCT2> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT2> + <OCR_RVCT3> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT3> + <OCR_RVCT4> + <Type>1</Type> + <StartAddress>0x79000</StartAddress> + <Size>0x5000</Size> + </OCR_RVCT4> + <OCR_RVCT5> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT5> + <OCR_RVCT6> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT6> + <OCR_RVCT7> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT7> + <OCR_RVCT8> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT8> + <OCR_RVCT9> + <Type>0</Type> + <StartAddress>0x20002800</StartAddress> + <Size>0xd800</Size> + </OCR_RVCT9> + <OCR_RVCT10> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT10> + </OnChipMemories> + <RvctStartVector></RvctStartVector> + </ArmAdsMisc> + <Cads> + <interw>1</interw> + <Optim>4</Optim> + <oTime>0</oTime> + <SplitLS>0</SplitLS> + <OneElfS>1</OneElfS> + <Strict>0</Strict> + <EnumInt>0</EnumInt> + <PlainCh>0</PlainCh> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <wLevel>0</wLevel> + <uThumb>0</uThumb> + <uSurpInc>0</uSurpInc> + <VariousControls> + <MiscControls>--c99 --reduce_paths</MiscControls> + <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=0 __STACK_SIZE=8192</Define> + <Undefine></Undefine> + <IncludePath>..\..\..\config;..\..\..;..\..\..\include;..\..\..\include\boot_common;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_fs;..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath> + </VariousControls> + </Cads> + <Aads> + <interw>1</interw> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <thumb>0</thumb> + <SplitLS>0</SplitLS> + <SwStkChk>0</SwStkChk> + <NoWarn>0</NoWarn> + <uSurpInc>0</uSurpInc> + <VariousControls> + <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=0,-D__STACK_SIZE=8192</MiscControls> + <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=0 __STACK_SIZE=8192</Define> + <Undefine></Undefine> + <IncludePath>..\..\..\config;..\..\..;..\..\..\include;..\..\..\include\boot_common;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_fs;..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath> + </VariousControls> + </Aads> + <LDads> + <umfTarg>1</umfTarg> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <noStLib>0</noStLib> + <RepFail>1</RepFail> + <useFile>0</useFile> + <TextAddressRange>0x00000000</TextAddressRange> + <DataAddressRange>0x00000000</DataAddressRange> + <ScatterFile></ScatterFile> + <IncludeLibs></IncludeLibs> + <IncludeLibsPath></IncludeLibsPath> + <Misc>--diag_suppress 6330</Misc> + <LinkerInputFile></LinkerInputFile> + <DisabledWarnings></DisabledWarnings> + </LDads> + </TargetArmAds> + </TargetOption> + <Groups> <Group> + <GroupName>None</GroupName> + <Files> <File> + <FileName>arm_startup_nrf52.s</FileName> + <FileType>2</FileType> + <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52.s</FilePath> </File> <File> + <FileName>system_nrf52.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>Application</GroupName> + <Files> <File> + <FileName>antfs_ota.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\antfs_ota.c</FilePath> </File> <File> + <FileName>bootloader.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\bootloader.c</FilePath> </File> <File> + <FileName>bootloader_util.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\bootloader_util.c</FilePath> </File> <File> + <FileName>bootloader_util_arm.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\bootloader_util_arm.c</FilePath> </File> <File> + <FileName>debug_pin.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\debug_pin.c</FilePath> </File> <File> + <FileName>dfu_dual_bank.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\dfu_dual_bank.c</FilePath> </File> <File> + <FileName>dfu_transport_ant.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\dfu_transport_ant.c</FilePath> </File> <File> + <FileName>main.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\main.c</FilePath> </File> <File> + <FileName>pstorage.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\pstorage.c</FilePath> </File> <File> + <FileName>sdk_config.h</FileName> + <FileType>5</FileType> + <FilePath>..\config\sdk_config.h</FilePath> </File> </Files> + </Group> <Group> + <GroupName>Board Definition</GroupName> + <Files> <File> + <FileName>boards.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>Board Support</GroupName> + <Files> <File> + <FileName>bsp.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_ANT</GroupName> + <Files> <File> + <FileName>ant_key_manager.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath> </File> <File> + <FileName>antfs.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\ant\ant_fs\antfs.c</FilePath> </File> <File> + <FileName>crc.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\ant\ant_fs\crc.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Drivers</GroupName> + <Files> <File> + <FileName>nrfx_gpiote.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Libraries</GroupName> + <Files> <File> + <FileName>app_button.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath> </File> <File> + <FileName>app_error.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath> </File> <File> + <FileName>app_error_handler_keil.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath> </File> <File> + <FileName>app_error_weak.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath> </File> <File> + <FileName>app_scheduler.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath> </File> <File> + <FileName>app_timer.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath> </File> <File> + <FileName>app_util_platform.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath> </File> <File> + <FileName>nrf_assert.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath> </File> <File> + <FileName>nrf_atomic.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath> </File> <File> + <FileName>nrf_balloc.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath> </File> <File> + <FileName>nrf_fprintf.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath> </File> <File> + <FileName>nrf_fprintf_format.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath> </File> <File> + <FileName>nrf_memobj.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath> </File> <File> + <FileName>nrf_section_iter.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath> </File> <File> + <FileName>nrf_strerror.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Log</GroupName> + <Files> <File> + <FileName>nrf_log_frontend.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath> </File> <File> + <FileName>nrf_log_str_formatter.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_SoftDevice</GroupName> + <Files> <File> + <FileName>nrf_sdh.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath> </File> <File> + <FileName>nrf_sdh_ant.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath> </File> <File> + <FileName>nrf_sdh_soc.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath> </File> </Files> + </Group> </Groups> + </Target> </Targets> + +</Project> diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/arm5_no_packs/dfu_experimental_dual_bank_ant_pca10040_s212.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/arm5_no_packs/dfu_experimental_dual_bank_ant_pca10040_s212.uvoptx new file mode 100644 index 0000000..e582265 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/arm5_no_packs/dfu_experimental_dual_bank_ant_pca10040_s212.uvoptx @@ -0,0 +1,115 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?> +<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd"> + + <SchemaVersion>1.0</SchemaVersion> + + <Header>### uVision Project, (C) Keil Software</Header> + <Target> + <TargetName>nrf52832_xxaa_s212</TargetName> + <ToolsetNumber>0x4</ToolsetNumber> + <ToolsetName>ARM-ADS</ToolsetName> + <TargetOption> + <OPTTT> + <gFlags>1</gFlags> + <BeepAtEnd>1</BeepAtEnd> + <RunSim>0</RunSim> + <RunTarget>1</RunTarget> + </OPTTT> + <OPTHX> + <HexSelection>1</HexSelection> + <FlashByte>65535</FlashByte> + <HexRangeLowAddress>0</HexRangeLowAddress> + <HexRangeHighAddress>0</HexRangeHighAddress> + <HexOffset>0</HexOffset> + </OPTHX> + <OPTLEX> + <PageWidth>79</PageWidth> + <PageLength>66</PageLength> + <TabStop>8</TabStop> + <ListingPath>.\_build\</ListingPath> + </OPTLEX> + <CpuCode>0</CpuCode> + <DebugOpt> + <uSim>0</uSim> + <uTrg>1</uTrg> + <sLdApp>1</sLdApp> + <sGomain>1</sGomain> + <sRbreak>1</sRbreak> + <sRwatch>1</sRwatch> + <sRmem>1</sRmem> + <sRfunc>1</sRfunc> + <sRbox>1</sRbox> + <tLdApp>1</tLdApp> + <tGomain>1</tGomain> + <tRbreak>1</tRbreak> + <tRwatch>1</tRwatch> + <tRmem>1</tRmem> + <tRfunc>0</tRfunc> + <tRbox>1</tRbox> + <tRtrace>0</tRtrace> + <sRSysVw>1</sRSysVw> + <tRSysVw>1</tRSysVw> + <tPdscDbg>1</tPdscDbg> + <sRunDeb>0</sRunDeb> + <sLrtime>0</sLrtime> + <nTsel>7</nTsel> + <sDll></sDll> + <sDllPa></sDllPa> + <sDlgDll></sDlgDll> + <sDlgPa></sDlgPa> + <sIfile></sIfile> + <tDll></tDll> + <tDllPa></tDllPa> + <tDlgDll></tDlgDll> + <tDlgPa></tDlgPa> + <tIfile></tIfile> + <pMon>Segger\JL2CM3.dll</pMon> + </DebugOpt> + <TargetDriverDllRegistry> + <SetRegEntry> + <Number>0</Number> + <Key>JL2CM3</Key> + <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52832_xxAA$Flash\nrf52xxx_uicr.flm)</Name> + </SetRegEntry> + <SetRegEntry> + <Number>0</Number> + <Key>UL2CM3</Key> + <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52832_xxAA$Flash\nrf52xxx))</Name> + </SetRegEntry> + </TargetDriverDllRegistry> + <Breakpoint/> + <Tracepoint> + <THDelay>0</THDelay> + </Tracepoint> + <DebugFlag> + <trace>0</trace> + <periodic>0</periodic> + <aLwin>0</aLwin> + <aCover>0</aCover> + <aSer1>0</aSer1> + <aSer2>0</aSer2> + <aPa>0</aPa> + <viewmode>0</viewmode> + <vrSel>0</vrSel> + <aSym>0</aSym> + <aTbox>0</aTbox> + <AscS1>0</AscS1> + <AscS2>0</AscS2> + <AscS3>0</AscS3> + <aSer3>0</aSer3> + <eProf>0</eProf> + <aLa>0</aLa> + <aPa1>0</aPa1> + <AscS4>0</AscS4> + <aSer4>0</aSer4> + <StkLoc>0</StkLoc> + <TrcWin>0</TrcWin> + <newCpu>0</newCpu> + <uProt>0</uProt> + </DebugFlag> + <LintExecutable></LintExecutable> + <LintConfigFile></LintConfigFile> + </TargetOption> + </Target></ProjectOpt> + + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/arm5_no_packs/dfu_experimental_dual_bank_ant_pca10040_s212.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/arm5_no_packs/dfu_experimental_dual_bank_ant_pca10040_s212.uvprojx new file mode 100644 index 0000000..f11c606 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/arm5_no_packs/dfu_experimental_dual_bank_ant_pca10040_s212.uvprojx @@ -0,0 +1,560 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?> +<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd"> + + <SchemaVersion>2.1</SchemaVersion> + + <Header>### uVision Project, (C) Keil Software</Header> + + <Targets> <Target> + <TargetName>nrf52832_xxaa_s212</TargetName> + <ToolsetNumber>0x4</ToolsetNumber> + <ToolsetName>ARM-ADS</ToolsetName> + <TargetOption> + <TargetCommonOption> <Device>nRF52832_xxAA</Device> + <Vendor>Nordic Semiconductor</Vendor> + <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID> + <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL> <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu> + <FlashUtilSpec></FlashUtilSpec> + <StartupFile></StartupFile> + <FlashDriverDll></FlashDriverDll> + <DeviceId>0</DeviceId> + <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile> + <MemoryEnv></MemoryEnv> + <Cmp></Cmp> + <Asm></Asm> + <Linker></Linker> + <OHString></OHString> + <InfinionOptionDll></InfinionOptionDll> + <SLE66CMisc></SLE66CMisc> + <SLE66AMisc></SLE66AMisc> + <SLE66LinkerMisc></SLE66LinkerMisc> + <SFDFile>..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52.svd</SFDFile> + <bCustSvd>0</bCustSvd> + <UseEnv>0</UseEnv> + <BinPath></BinPath> + <IncludePath></IncludePath> + <LibPath></LibPath> + <RegisterFilePath></RegisterFilePath> + <DBRegisterFilePath></DBRegisterFilePath> + <TargetStatus> + <Error>0</Error> + <ExitCodeStop>0</ExitCodeStop> + <ButtonStop>0</ButtonStop> + <NotGenerated>0</NotGenerated> + <InvalidFlash>1</InvalidFlash> + </TargetStatus> + <OutputDirectory>.\_build\</OutputDirectory> + <OutputName>nrf52832_xxaa_s212</OutputName> + <CreateExecutable>1</CreateExecutable> + <CreateLib>0</CreateLib> + <CreateHexFile>1</CreateHexFile> + <DebugInformation>1</DebugInformation> + <BrowseInformation>1</BrowseInformation> + <ListingPath>.\_build\</ListingPath> + <HexFormatSelection>1</HexFormatSelection> + <Merge32K>0</Merge32K> + <CreateBatchFile>0</CreateBatchFile> + <BeforeCompile> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + <nStopU1X>0</nStopU1X> + <nStopU2X>0</nStopU2X> + </BeforeCompile> + <BeforeMake> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + <nStopB1X>0</nStopB1X> + <nStopB2X>0</nStopB2X> + </BeforeMake> + <AfterMake> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + <nStopA1X>0</nStopA1X> + <nStopA2X>0</nStopA2X> + </AfterMake> + <SelectedForBatchBuild>0</SelectedForBatchBuild> + <SVCSIdString></SVCSIdString> + </TargetCommonOption> + <CommonProperty> + <UseCPPCompiler>0</UseCPPCompiler> + <RVCTCodeConst>0</RVCTCodeConst> + <RVCTZI>0</RVCTZI> + <RVCTOtherData>0</RVCTOtherData> + <ModuleSelection>0</ModuleSelection> + <IncludeInBuild>1</IncludeInBuild> + <AlwaysBuild>0</AlwaysBuild> + <GenerateAssemblyFile>0</GenerateAssemblyFile> + <AssembleAssemblyFile>0</AssembleAssemblyFile> + <PublicsOnly>0</PublicsOnly> + <StopOnExitCode>3</StopOnExitCode> + <CustomArgument></CustomArgument> + <IncludeLibraryModules></IncludeLibraryModules> + <ComprImg>1</ComprImg> + </CommonProperty> + <DllOption> + <SimDllName></SimDllName> + <SimDllArguments></SimDllArguments> + <SimDlgDll></SimDlgDll> + <SimDlgDllArguments></SimDlgDllArguments> + <TargetDllName>SARMCM3.DLL</TargetDllName> + <TargetDllArguments>-MPU</TargetDllArguments> + <TargetDlgDll>TCM.DLL</TargetDlgDll> + <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments> + </DllOption> + <DebugOption> + <OPTHX> + <HexSelection>1</HexSelection> + <HexRangeLowAddress>0</HexRangeLowAddress> + <HexRangeHighAddress>0</HexRangeHighAddress> + <HexOffset>0</HexOffset> + <Oh166RecLen>16</Oh166RecLen> + </OPTHX> + <Simulator> + <UseSimulator>0</UseSimulator> + <LoadApplicationAtStartup>1</LoadApplicationAtStartup> + <RunToMain>1</RunToMain> + <RestoreBreakpoints>1</RestoreBreakpoints> + <RestoreWatchpoints>1</RestoreWatchpoints> + <RestoreMemoryDisplay>1</RestoreMemoryDisplay> + <RestoreFunctions>1</RestoreFunctions> + <RestoreToolbox>1</RestoreToolbox> + <LimitSpeedToRealTime>0</LimitSpeedToRealTime> + <RestoreSysVw>1</RestoreSysVw> + </Simulator> + <Target> + <UseTarget>1</UseTarget> + <LoadApplicationAtStartup>1</LoadApplicationAtStartup> + <RunToMain>1</RunToMain> + <RestoreBreakpoints>1</RestoreBreakpoints> + <RestoreWatchpoints>1</RestoreWatchpoints> + <RestoreMemoryDisplay>1</RestoreMemoryDisplay> + <RestoreFunctions>0</RestoreFunctions> + <RestoreToolbox>1</RestoreToolbox> + <RestoreTracepoints>0</RestoreTracepoints> + <RestoreSysVw>1</RestoreSysVw> <UsePdscDebugDescription>1</UsePdscDebugDescription> </Target> + <RunDebugAfterBuild>0</RunDebugAfterBuild> + <TargetSelection>-1</TargetSelection> + <SimDlls> + <CpuDll></CpuDll> + <CpuDllArguments></CpuDllArguments> + <PeripheralDll></PeripheralDll> + <PeripheralDllArguments></PeripheralDllArguments> + <InitializationFile></InitializationFile> + </SimDlls> + <TargetDlls> + <CpuDll></CpuDll> + <CpuDllArguments></CpuDllArguments> + <PeripheralDll></PeripheralDll> + <PeripheralDllArguments></PeripheralDllArguments> + <InitializationFile></InitializationFile> + <Driver>Segger\JL2CM3.dll</Driver> + </TargetDlls> + </DebugOption> + <Utilities> + <Flash1> + <UseTargetDll>1</UseTargetDll> + <UseExternalTool>0</UseExternalTool> + <RunIndependent>0</RunIndependent> + <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging> + <Capability>1</Capability> + <DriverSelection>4099</DriverSelection> + </Flash1> + <bUseTDR>1</bUseTDR> + <Flash2>Segger\JL2CM3.dll</Flash2> + <Flash3></Flash3> + <Flash4></Flash4> + </Utilities> + <TargetArmAds> + <ArmAdsMisc> + <GenerateListings>0</GenerateListings> + <asHll>1</asHll> + <asAsm>1</asAsm> + <asMacX>1</asMacX> + <asSyms>1</asSyms> + <asFals>1</asFals> + <asDbgD>1</asDbgD> + <asForm>1</asForm> + <ldLst>0</ldLst> + <ldmm>1</ldmm> + <ldXref>1</ldXref> + <BigEnd>0</BigEnd> + <AdsALst>1</AdsALst> + <AdsACrf>1</AdsACrf> + <AdsANop>0</AdsANop> + <AdsANot>0</AdsANot> + <AdsLLst>1</AdsLLst> + <AdsLmap>1</AdsLmap> + <AdsLcgr>1</AdsLcgr> + <AdsLsym>1</AdsLsym> + <AdsLszi>1</AdsLszi> + <AdsLtoi>1</AdsLtoi> + <AdsLsun>1</AdsLsun> + <AdsLven>1</AdsLven> + <AdsLsxf>1</AdsLsxf> + <RvctClst>0</RvctClst> + <GenPPlst>0</GenPPlst> + <AdsCpuType>"Cortex-M4"</AdsCpuType> + <RvctDeviceName></RvctDeviceName> + <mOS>0</mOS> + <uocRom>0</uocRom> + <uocRam>0</uocRam> + <hadIROM>1</hadIROM> + <hadIRAM>1</hadIRAM> + <hadXRAM>0</hadXRAM> + <uocXRam>0</uocXRam> + <RvdsVP>2</RvdsVP> + <hadIRAM2>0</hadIRAM2> + <hadIROM2>0</hadIROM2> + <StupSel>8</StupSel> + <useUlib>1</useUlib> + <EndSel>0</EndSel> + <uLtcg>0</uLtcg> + <nSecure>0</nSecure> + <RoSelD>3</RoSelD> + <RwSelD>3</RwSelD> + <CodeSel>0</CodeSel> + <OptFeed>0</OptFeed> + <NoZi1>0</NoZi1> + <NoZi2>0</NoZi2> + <NoZi3>0</NoZi3> + <NoZi4>0</NoZi4> + <NoZi5>0</NoZi5> + <Ro1Chk>0</Ro1Chk> + <Ro2Chk>0</Ro2Chk> + <Ro3Chk>0</Ro3Chk> + <Ir1Chk>1</Ir1Chk> + <Ir2Chk>0</Ir2Chk> + <Ra1Chk>0</Ra1Chk> + <Ra2Chk>0</Ra2Chk> + <Ra3Chk>0</Ra3Chk> + <Im1Chk>1</Im1Chk> + <Im2Chk>0</Im2Chk> + <OnChipMemories> + <Ocm1> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm1> + <Ocm2> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm2> + <Ocm3> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm3> + <Ocm4> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm4> + <Ocm5> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm5> + <Ocm6> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm6> + <IRAM> + <Type>0</Type> + <StartAddress>0x20000000</StartAddress> + <Size>0x10000</Size> + </IRAM> + <IROM> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x80000</Size> + </IROM> + <XRAM> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </XRAM> + <OCR_RVCT1> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT1> + <OCR_RVCT2> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT2> + <OCR_RVCT3> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT3> + <OCR_RVCT4> + <Type>1</Type> + <StartAddress>0x79000</StartAddress> + <Size>0x5000</Size> + </OCR_RVCT4> + <OCR_RVCT5> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT5> + <OCR_RVCT6> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT6> + <OCR_RVCT7> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT7> + <OCR_RVCT8> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT8> + <OCR_RVCT9> + <Type>0</Type> + <StartAddress>0x20002800</StartAddress> + <Size>0xd800</Size> + </OCR_RVCT9> + <OCR_RVCT10> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT10> + </OnChipMemories> + <RvctStartVector></RvctStartVector> + </ArmAdsMisc> + <Cads> + <interw>1</interw> + <Optim>4</Optim> + <oTime>0</oTime> + <SplitLS>0</SplitLS> + <OneElfS>1</OneElfS> + <Strict>0</Strict> + <EnumInt>0</EnumInt> + <PlainCh>0</PlainCh> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <wLevel>0</wLevel> + <uThumb>0</uThumb> + <uSurpInc>0</uSurpInc> + <uC99>1</uC99> + <useXO>0</useXO> + <v6Lang>0</v6Lang> + <v6LangP>0</v6LangP> + <vShortEn>0</vShortEn> + <vShortWch>0</vShortWch> + <VariousControls> + <MiscControls>--reduce_paths</MiscControls> + <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=0 __STACK_SIZE=8192</Define> + <Undefine></Undefine> + <IncludePath>..\..\..\config;..\..\..;..\..\..\include;..\..\..\include\boot_common;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_fs;..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath> + </VariousControls> + </Cads> + <Aads> + <interw>1</interw> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <thumb>0</thumb> + <SplitLS>0</SplitLS> + <SwStkChk>0</SwStkChk> + <NoWarn>0</NoWarn> + <uSurpInc>0</uSurpInc> + <useXO>0</useXO> + <VariousControls> + <MiscControls> --cpreproc_opts=-DANT_STACK_SUPPORT_REQD,-DBOARD_PCA10040,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52,-DNRF52832_XXAA,-DNRF52_PAN_74,-DS212,-DSOFTDEVICE_PRESENT,-DSWI_DISABLE0,-D__HEAP_SIZE=0,-D__STACK_SIZE=8192</MiscControls> + <Define> ANT_STACK_SUPPORT_REQD BOARD_PCA10040 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52 NRF52832_XXAA NRF52_PAN_74 S212 SOFTDEVICE_PRESENT SWI_DISABLE0 __HEAP_SIZE=0 __STACK_SIZE=8192</Define> + <Undefine></Undefine> + <IncludePath>..\..\..\config;..\..\..;..\..\..\include;..\..\..\include\boot_common;..\..\..\..\..\..\..\components;..\..\..\..\..\..\..\components\ant\ant_fs;..\..\..\..\..\..\..\components\ant\ant_key_manager;..\..\..\..\..\..\..\components\ant\ant_key_manager\config;..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\components\libraries\bsp;..\..\..\..\..\..\..\components\libraries\button;..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\components\libraries\timer;..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..\..\..\components\softdevice\common;..\..\..\..\..\..\..\components\softdevice\s212\headers;..\..\..\..\..\..\..\components\softdevice\s212\headers\nrf52;..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath> + </VariousControls> + </Aads> + <LDads> + <umfTarg>1</umfTarg> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <noStLib>0</noStLib> + <RepFail>1</RepFail> + <useFile>0</useFile> + <TextAddressRange>0x00000000</TextAddressRange> + <DataAddressRange>0x20000000</DataAddressRange> + <pXoBase></pXoBase> + <ScatterFile></ScatterFile> + <IncludeLibs></IncludeLibs> + <IncludeLibsPath></IncludeLibsPath> + <Misc>--diag_suppress 6330</Misc> + <LinkerInputFile></LinkerInputFile> + <DisabledWarnings></DisabledWarnings> + </LDads> + </TargetArmAds> + </TargetOption> + <Groups> <Group> + <GroupName>Application</GroupName> + <Files> <File> + <FileName>antfs_ota.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\antfs_ota.c</FilePath> </File> <File> + <FileName>bootloader.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\bootloader.c</FilePath> </File> <File> + <FileName>bootloader_util.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\bootloader_util.c</FilePath> </File> <File> + <FileName>bootloader_util_arm.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\bootloader_util_arm.c</FilePath> </File> <File> + <FileName>debug_pin.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\debug_pin.c</FilePath> </File> <File> + <FileName>dfu_dual_bank.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\dfu_dual_bank.c</FilePath> </File> <File> + <FileName>dfu_transport_ant.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\dfu_transport_ant.c</FilePath> </File> <File> + <FileName>main.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\main.c</FilePath> </File> <File> + <FileName>pstorage.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\pstorage.c</FilePath> </File> <File> + <FileName>sdk_config.h</FileName> + <FileType>5</FileType> + <FilePath>..\config\sdk_config.h</FilePath> </File> </Files> + </Group> <Group> + <GroupName>Board Definition</GroupName> + <Files> <File> + <FileName>boards.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\boards\boards.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>Board Support</GroupName> + <Files> <File> + <FileName>bsp.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\bsp\bsp.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_ANT</GroupName> + <Files> <File> + <FileName>ant_key_manager.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\ant\ant_key_manager\ant_key_manager.c</FilePath> </File> <File> + <FileName>antfs.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\ant\ant_fs\antfs.c</FilePath> </File> <File> + <FileName>crc.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\ant\ant_fs\crc.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Drivers</GroupName> + <Files> <File> + <FileName>nrfx_gpiote.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_gpiote.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Libraries</GroupName> + <Files> <File> + <FileName>app_button.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\button\app_button.c</FilePath> </File> <File> + <FileName>app_error.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath> </File> <File> + <FileName>app_error_handler_keil.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath> </File> <File> + <FileName>app_error_weak.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath> </File> <File> + <FileName>app_scheduler.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c</FilePath> </File> <File> + <FileName>app_timer.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\timer\app_timer.c</FilePath> </File> <File> + <FileName>app_util_platform.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath> </File> <File> + <FileName>nrf_assert.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath> </File> <File> + <FileName>nrf_atomic.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath> </File> <File> + <FileName>nrf_balloc.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath> </File> <File> + <FileName>nrf_fprintf.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath> </File> <File> + <FileName>nrf_fprintf_format.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath> </File> <File> + <FileName>nrf_memobj.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath> </File> <File> + <FileName>nrf_section_iter.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_section_vars\nrf_section_iter.c</FilePath> </File> <File> + <FileName>nrf_strerror.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Log</GroupName> + <Files> <File> + <FileName>nrf_log_frontend.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath> </File> <File> + <FileName>nrf_log_str_formatter.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_SoftDevice</GroupName> + <Files> <File> + <FileName>nrf_sdh.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh.c</FilePath> </File> <File> + <FileName>nrf_sdh_ant.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_ant.c</FilePath> </File> <File> + <FileName>nrf_sdh_soc.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\components\softdevice\common\nrf_sdh_soc.c</FilePath> </File> </Files> + </Group> </Groups> + </Target> </Targets><RTE> + <packages> + <filter> + <targetInfos/> + </filter> <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"> + <targetInfos> <targetInfo name="nrf52832_xxaa_s212" versionMatchMode="fixed"/> </targetInfos> + </package> + <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"> + <targetInfos> <targetInfo name="nrf52832_xxaa_s212" versionMatchMode="fixed"/> </targetInfos> + </package> </packages> + <apis/> + <components> <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core"> + <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/> + <targetInfos> <targetInfo name="nrf52832_xxaa_s212" versionMatchMode="fixed"/> </targetInfos> + </component> + <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device"> + <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/> + <targetInfos> <targetInfo name="nrf52832_xxaa_s212" versionMatchMode="fixed"/> </targetInfos> + </component> </components> + <files> </files> +</RTE> +</Project> diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/armgcc/Makefile new file mode 100644 index 0000000..83f01dd --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/armgcc/Makefile @@ -0,0 +1,188 @@ +PROJECT_NAME := dfu_experimental_dual_bank_ant_pca10040_s212 +TARGETS := nrf52832_xxaa_s212 +OUTPUT_DIRECTORY := _build + +SDK_ROOT := ../../../../../../.. +PROJ_DIR := ../../.. + +$(OUTPUT_DIRECTORY)/nrf52832_xxaa_s212.out: \ + LINKER_SCRIPT := dfu_gcc_nrf52.ld + +# Source files common to all targets +SRC_FILES += \ + $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52.S \ + $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \ + $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \ + $(SDK_ROOT)/components/boards/boards.c \ + $(SDK_ROOT)/components/libraries/button/app_button.c \ + $(SDK_ROOT)/components/libraries/util/app_error.c \ + $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \ + $(SDK_ROOT)/components/libraries/util/app_error_weak.c \ + $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \ + $(SDK_ROOT)/components/libraries/timer/app_timer.c \ + $(SDK_ROOT)/components/libraries/util/app_util_platform.c \ + $(SDK_ROOT)/components/libraries/util/nrf_assert.c \ + $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \ + $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \ + $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \ + $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \ + $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \ + $(SDK_ROOT)/components/libraries/experimental_section_vars/nrf_section_iter.c \ + $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \ + $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_gpiote.c \ + $(SDK_ROOT)/components/ant/ant_key_manager/ant_key_manager.c \ + $(SDK_ROOT)/components/ant/ant_fs/antfs.c \ + $(SDK_ROOT)/components/ant/ant_fs/crc.c \ + $(SDK_ROOT)/components/libraries/bsp/bsp.c \ + $(PROJ_DIR)/antfs_ota.c \ + $(PROJ_DIR)/bootloader.c \ + $(PROJ_DIR)/bootloader_util.c \ + $(PROJ_DIR)/bootloader_util_gcc.c \ + $(PROJ_DIR)/debug_pin.c \ + $(PROJ_DIR)/dfu_dual_bank.c \ + $(PROJ_DIR)/dfu_transport_ant.c \ + $(PROJ_DIR)/main.c \ + $(PROJ_DIR)/pstorage.c \ + $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52.c \ + $(SDK_ROOT)/components/softdevice/common/nrf_sdh.c \ + $(SDK_ROOT)/components/softdevice/common/nrf_sdh_ant.c \ + $(SDK_ROOT)/components/softdevice/common/nrf_sdh_soc.c \ + +# Include folders common to all targets +INC_FOLDERS += \ + $(PROJ_DIR)/config \ + $(PROJ_DIR) \ + $(PROJ_DIR)/include \ + $(PROJ_DIR)/include/boot_common \ + $(SDK_ROOT)/external/fprintf \ + $(SDK_ROOT)/components/libraries/experimental_section_vars \ + $(SDK_ROOT)/components/ant/ant_key_manager \ + $(SDK_ROOT)/components/libraries/experimental_log \ + $(SDK_ROOT)/components/libraries/experimental_memobj \ + $(SDK_ROOT)/components/libraries/atomic \ + $(SDK_ROOT)/components/libraries/delay \ + ../config \ + $(SDK_ROOT)/components/libraries/balloc \ + $(SDK_ROOT)/components/softdevice/common \ + $(SDK_ROOT)/components \ + $(SDK_ROOT)/modules/nrfx/mdk \ + $(SDK_ROOT)/components/libraries/scheduler \ + $(SDK_ROOT)/components/libraries/strerror \ + $(SDK_ROOT)/integration/nrfx \ + $(SDK_ROOT)/modules/nrfx/drivers/include \ + $(SDK_ROOT)/components/softdevice/s212/headers/nrf52 \ + $(SDK_ROOT)/components/libraries/experimental_log/src \ + $(SDK_ROOT)/components/softdevice/s212/headers \ + $(SDK_ROOT)/modules/nrfx \ + $(SDK_ROOT)/components/ant/ant_fs \ + $(SDK_ROOT)/modules/nrfx/hal \ + $(SDK_ROOT)/components/ant/ant_key_manager/config \ + $(SDK_ROOT)/components/libraries/bsp \ + $(SDK_ROOT)/components/boards \ + $(SDK_ROOT)/components/libraries/timer \ + $(SDK_ROOT)/components/libraries/button \ + $(SDK_ROOT)/integration/nrfx/legacy \ + $(SDK_ROOT)/components/libraries/util \ + $(SDK_ROOT)/components/toolchain/cmsis/include \ + +# Libraries common to all targets +LIB_FILES += \ + +# Optimization flags +OPT = -Os -g3 +# Uncomment the line below to enable link time optimization +#OPT += -flto + +# C flags common to all targets +CFLAGS += $(OPT) +CFLAGS += -DANT_STACK_SUPPORT_REQD +CFLAGS += -DBOARD_PCA10040 +CFLAGS += -DCONFIG_GPIO_AS_PINRESET +CFLAGS += -DFLOAT_ABI_HARD +CFLAGS += -DNRF52 +CFLAGS += -DNRF52832_XXAA +CFLAGS += -DNRF52_PAN_74 +CFLAGS += -DS212 +CFLAGS += -DSOFTDEVICE_PRESENT +CFLAGS += -DSWI_DISABLE0 +CFLAGS += -mcpu=cortex-m4 +CFLAGS += -mthumb -mabi=aapcs +CFLAGS += -Wall -Werror +CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 +# keep every function in a separate section, this allows linker to discard unused ones +CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing +CFLAGS += -fno-builtin -fshort-enums -flto + +# C++ flags common to all targets +CXXFLAGS += $(OPT) + +# Assembler flags common to all targets +ASMFLAGS += -g3 +ASMFLAGS += -mcpu=cortex-m4 +ASMFLAGS += -mthumb -mabi=aapcs +ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 +ASMFLAGS += -DANT_STACK_SUPPORT_REQD +ASMFLAGS += -DBOARD_PCA10040 +ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET +ASMFLAGS += -DFLOAT_ABI_HARD +ASMFLAGS += -DNRF52 +ASMFLAGS += -DNRF52832_XXAA +ASMFLAGS += -DNRF52_PAN_74 +ASMFLAGS += -DS212 +ASMFLAGS += -DSOFTDEVICE_PRESENT +ASMFLAGS += -DSWI_DISABLE0 + +# Linker flags +LDFLAGS += $(OPT) +LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT) +LDFLAGS += -mcpu=cortex-m4 +LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 +# let linker dump unused sections +LDFLAGS += -Wl,--gc-sections +# use newlib in nano version +LDFLAGS += --specs=nano.specs + +nrf52832_xxaa_s212: CFLAGS += -D__HEAP_SIZE=0 +nrf52832_xxaa_s212: CFLAGS += -D__STACK_SIZE=8192 +nrf52832_xxaa_s212: ASMFLAGS += -D__HEAP_SIZE=0 +nrf52832_xxaa_s212: ASMFLAGS += -D__STACK_SIZE=8192 + +# Add standard libraries at the very end of the linker input, after all objects +# that may need symbols provided by these libraries. +LIB_FILES += -lc -lnosys -lm + + +.PHONY: default help + +# Default target - first one defined +default: nrf52832_xxaa_s212 + +# Print all targets that can be built +help: + @echo following targets are available: + @echo nrf52832_xxaa_s212 + @echo sdk_config - starting external tool for editing sdk_config.h + @echo flash - flashing binary + +TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc + + +include $(TEMPLATE_PATH)/Makefile.common + +$(foreach target, $(TARGETS), $(call define_target, $(target))) + +.PHONY: flash erase + +# Flash the program +flash: $(OUTPUT_DIRECTORY)/nrf52832_xxaa_s212.hex + @echo Flashing: $< + nrfjprog -f nrf52 --program $< --sectorerase + nrfjprog -f nrf52 --reset + +erase: + nrfjprog -f nrf52 --eraseall + +SDK_CONFIG_FILE := ../config/sdk_config.h +CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar +sdk_config: + java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE) diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/armgcc/dfu_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/armgcc/dfu_gcc_nrf52.ld new file mode 100644 index 0000000..db1aebe --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/armgcc/dfu_gcc_nrf52.ld @@ -0,0 +1,109 @@ +/* Linker script to configure memory regions. */ + +SEARCH_DIR(.) +GROUP(-lgcc -lc -lnosys) + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x79000, LENGTH = 0x5000 + RAM (rwx) : ORIGIN = 0x20002800, LENGTH = 0xd800 + boot_settings_pending (r) : ORIGIN = 0x0007E000, LENGTH = 0x1000 + boot_settings (r) : ORIGIN = 0x0007F000, LENGTH = 0x1000 + uicr_boot_start_address (r) : ORIGIN = 0x10001014, LENGTH = 0x4 + uicr_mbr_retaining_address (r) : ORIGIN = 0x10001018, LENGTH = 0x4 +} + +SECTIONS +{ + .boot_settings_pending(NOLOAD) : + { + PROVIDE(__start_boot_settings_pending = .); + KEEP(*(SORT(.boot_settings_pending*))) + PROVIDE(__stop_boot_settings_pending = .); + } > boot_settings_pending + .boot_settings(NOLOAD) : + { + PROVIDE(__start_boot_settings = .); + KEEP(*(SORT(.boot_settings*))) + PROVIDE(__stop_boot_settings = .); + } > boot_settings + .uicr_boot_start_address : + { + PROVIDE(__start_uicr_boot_start_address = .); + KEEP(*(SORT(.uicr_boot_start_address*))) + PROVIDE(__stop_uicr_boot_start_address = .); + } > uicr_boot_start_address + .uicr_mbr_retaining_address : + { + PROVIDE(__start_uicr_mbr_retaining_address = .); + KEEP(*(SORT(.uicr_mbr_retaining_address*))) + PROVIDE(__stop_uicr_mbr_retaining_address = .); + } > uicr_mbr_retaining_address +} + +SECTIONS +{ + . = ALIGN(4); + .mem_section_dummy_ram : + { + } + .log_dynamic_data : + { + PROVIDE(__start_log_dynamic_data = .); + KEEP(*(SORT(.log_dynamic_data*))) + PROVIDE(__stop_log_dynamic_data = .); + } > RAM + +} INSERT AFTER .data; + +SECTIONS +{ + .mem_section_dummy_rom : + { + } + .sdh_ant_observers : + { + PROVIDE(__start_sdh_ant_observers = .); + KEEP(*(SORT(.sdh_ant_observers*))) + PROVIDE(__stop_sdh_ant_observers = .); + } > FLASH + .sdh_soc_observers : + { + PROVIDE(__start_sdh_soc_observers = .); + KEEP(*(SORT(.sdh_soc_observers*))) + PROVIDE(__stop_sdh_soc_observers = .); + } > FLASH + .log_const_data : + { + PROVIDE(__start_log_const_data = .); + KEEP(*(SORT(.log_const_data*))) + PROVIDE(__stop_log_const_data = .); + } > FLASH + .nrf_balloc : + { + PROVIDE(__start_nrf_balloc = .); + KEEP(*(.nrf_balloc)) + PROVIDE(__stop_nrf_balloc = .); + } > FLASH + .sdh_state_observers : + { + PROVIDE(__start_sdh_state_observers = .); + KEEP(*(SORT(.sdh_state_observers*))) + PROVIDE(__stop_sdh_state_observers = .); + } > FLASH + .sdh_stack_observers : + { + PROVIDE(__start_sdh_stack_observers = .); + KEEP(*(SORT(.sdh_stack_observers*))) + PROVIDE(__stop_sdh_stack_observers = .); + } > FLASH + .sdh_req_observers : + { + PROVIDE(__start_sdh_req_observers = .); + KEEP(*(SORT(.sdh_req_observers*))) + PROVIDE(__stop_sdh_req_observers = .); + } > FLASH + +} INSERT AFTER .text + +INCLUDE "nrf_common.ld" diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/config/sdk_config.h new file mode 100644 index 0000000..f363c7a --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/config/sdk_config.h @@ -0,0 +1,3303 @@ +/** + * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + + + +#ifndef SDK_CONFIG_H +#define SDK_CONFIG_H +// <<< Use Configuration Wizard in Context Menu >>>\n +#ifdef USE_APP_CONFIG +#include "app_config.h" +#endif +// <h> nRF_ANT + +//========================================================== +// <e> ANTFS_ENABLED - ant_fs - ANT File Share module. +//========================================================== +#ifndef ANTFS_ENABLED +#define ANTFS_ENABLED 1 +#endif +// <o> ANTFS_CONFIG_NETWORK_NUMBER - ANT-FS network number. +#ifndef ANTFS_CONFIG_NETWORK_NUMBER +#define ANTFS_CONFIG_NETWORK_NUMBER 0 +#endif + +// <o> ANTFS_CONFIG_CHANNEL_NUMBER - ANT-FS channel number. +#ifndef ANTFS_CONFIG_CHANNEL_NUMBER +#define ANTFS_CONFIG_CHANNEL_NUMBER 0 +#endif + +// <o> ANTFS_CONFIG_PAIRING_TIMEOUT - Pairing timeout - how long the UI will wait for a response to a pairing request before switching to the link layer, in seconds. +#ifndef ANTFS_CONFIG_PAIRING_TIMEOUT +#define ANTFS_CONFIG_PAIRING_TIMEOUT 120 +#endif + +// <o> ANTFS_CONFIG_LINK_COMMAND_TIMEOUT - Command timeout - how long the client will wait without receiving any commands before switching to the link layer, in seconds. +#ifndef ANTFS_CONFIG_LINK_COMMAND_TIMEOUT +#define ANTFS_CONFIG_LINK_COMMAND_TIMEOUT 10 +#endif + +// <o> ANTFS_CONFIG_TRANS_TYPE - ANT-FS Transmission Type. +#ifndef ANTFS_CONFIG_TRANS_TYPE +#define ANTFS_CONFIG_TRANS_TYPE 5 +#endif + +// <o> ANTFS_CONFIG_DEVICE_TYPE - ANT device type for channel configuration. +#ifndef ANTFS_CONFIG_DEVICE_TYPE +#define ANTFS_CONFIG_DEVICE_TYPE 16 +#endif + +// <o> ANTFS_CONFIG_BEACON_STATUS_PERIOD - ANT-FS Beacon Message Period. + +// <0=> 0.5 Hz +// <1=> 1 Hz +// <2=> 2 Hz +// <3=> 4 Hz +// <4=> 8 Hz + +#ifndef ANTFS_CONFIG_BEACON_STATUS_PERIOD +#define ANTFS_CONFIG_BEACON_STATUS_PERIOD 3 +#endif + +// <o> ANTFS_CONFIG_TRANSMIT_POWER - ANT Transmit Power. + +// <0=> Lowest ANT Tx power level setting. (-20dBm) +// <1=> ANT Tx power > Lvl 0. (-12dBm) +// <2=> ANT Tx power > Lvl 1. (-4dBm) +// <3=> ANT Tx power > Lvl 2. Default tx power level. (0dBm) +// <4=> ANT Tx power > Lvl 3. (+4dBm) +// <128=> Custom tx power selection + +#ifndef ANTFS_CONFIG_TRANSMIT_POWER +#define ANTFS_CONFIG_TRANSMIT_POWER 3 +#endif + +// <o> ANTFS_CONFIG_CUSTOM_TRANSMIT_POWER - ANT Custom Transmit Power. +#ifndef ANTFS_CONFIG_CUSTOM_TRANSMIT_POWER +#define ANTFS_CONFIG_CUSTOM_TRANSMIT_POWER 0 +#endif + +// <q> ANTFS_CONFIG_AUTH_TYPE_PAIRING_ENABLED - Use pairing and key exchange authentication. + + +#ifndef ANTFS_CONFIG_AUTH_TYPE_PAIRING_ENABLED +#define ANTFS_CONFIG_AUTH_TYPE_PAIRING_ENABLED 0 +#endif + +// <q> ANTFS_CONFIG_AUTH_TYPE_PASSKEY_ENABLED - Use passkey authentication. + + +#ifndef ANTFS_CONFIG_AUTH_TYPE_PASSKEY_ENABLED +#define ANTFS_CONFIG_AUTH_TYPE_PASSKEY_ENABLED 0 +#endif + +// <q> ANTFS_CONFIG_AUTH_TYPE_PASSTHROUGH_ENABLED - Allow host to bypass authentication. + + +#ifndef ANTFS_CONFIG_AUTH_TYPE_PASSTHROUGH_ENABLED +#define ANTFS_CONFIG_AUTH_TYPE_PASSTHROUGH_ENABLED 1 +#endif + +// <q> ANTFS_CONFIG_UPLOAD_ENABLED - Support upload operation. + + +#ifndef ANTFS_CONFIG_UPLOAD_ENABLED +#define ANTFS_CONFIG_UPLOAD_ENABLED 1 +#endif + +// <q> ANTFS_CONFIG_DEBUG_LED_ENABLED - Enables LED debug in the module. + + +#ifndef ANTFS_CONFIG_DEBUG_LED_ENABLED +#define ANTFS_CONFIG_DEBUG_LED_ENABLED 0 +#endif + +// </e> + +// <q> ANT_KEY_MANAGER_ENABLED - ant_key_manager - Software Component + + +#ifndef ANT_KEY_MANAGER_ENABLED +#define ANT_KEY_MANAGER_ENABLED 1 +#endif + +// </h> +//========================================================== + +// <h> nRF_Drivers + +//========================================================== +// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer +//========================================================== +#ifndef GPIOTE_ENABLED +#define GPIOTE_ENABLED 1 +#endif +// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins +#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS +#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4 +#endif + +// <o> GPIOTE_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef GPIOTE_CONFIG_IRQ_PRIORITY +#define GPIOTE_CONFIG_IRQ_PRIORITY 7 +#endif + +// </e> + +// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver +//========================================================== +#ifndef NRFX_GPIOTE_ENABLED +#define NRFX_GPIOTE_ENABLED 1 +#endif +// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins +#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS +#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1 +#endif + +// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY +#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7 +#endif + +// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED +#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL +#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR +#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR +#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </e> + +// </h> +//========================================================== + +// <h> nRF_Libraries + +//========================================================== +// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler +//========================================================== +#ifndef APP_SCHEDULER_ENABLED +#define APP_SCHEDULER_ENABLED 1 +#endif +// <q> APP_SCHEDULER_WITH_PAUSE - Enabling pause feature + + +#ifndef APP_SCHEDULER_WITH_PAUSE +#define APP_SCHEDULER_WITH_PAUSE 0 +#endif + +// <q> APP_SCHEDULER_WITH_PROFILER - Enabling scheduler profiling + + +#ifndef APP_SCHEDULER_WITH_PROFILER +#define APP_SCHEDULER_WITH_PROFILER 0 +#endif + +// </e> + +// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality +//========================================================== +#ifndef APP_TIMER_ENABLED +#define APP_TIMER_ENABLED 1 +#endif +// <o> APP_TIMER_CONFIG_RTC_FREQUENCY - Configure RTC prescaler. + +// <0=> 32768 Hz +// <1=> 16384 Hz +// <3=> 8192 Hz +// <7=> 4096 Hz +// <15=> 2048 Hz +// <31=> 1024 Hz + +#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY +#define APP_TIMER_CONFIG_RTC_FREQUENCY 0 +#endif + +// <o> APP_TIMER_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY +#define APP_TIMER_CONFIG_IRQ_PRIORITY 7 +#endif + +// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. +// <i> Size of the queue depends on how many timers are used +// <i> in the system, how often timers are started and overall +// <i> system latency. If queue size is too small app_timer calls +// <i> will fail. + +#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE +#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10 +#endif + +// <q> APP_TIMER_CONFIG_USE_SCHEDULER - Enable scheduling app_timer events to app_scheduler + + +#ifndef APP_TIMER_CONFIG_USE_SCHEDULER +#define APP_TIMER_CONFIG_USE_SCHEDULER 1 +#endif + +// <q> APP_TIMER_KEEPS_RTC_ACTIVE - Enable RTC always on + + +// <i> If option is enabled RTC is kept running even if there is no active timers. +// <i> This option can be used when app_timer is used for timestamping. + +#ifndef APP_TIMER_KEEPS_RTC_ACTIVE +#define APP_TIMER_KEEPS_RTC_ACTIVE 0 +#endif + +// <h> App Timer Legacy configuration - Legacy configuration. + +//========================================================== +// <q> APP_TIMER_WITH_PROFILER - Enable app_timer profiling + + +#ifndef APP_TIMER_WITH_PROFILER +#define APP_TIMER_WITH_PROFILER 0 +#endif + +// <q> APP_TIMER_CONFIG_SWI_NUMBER - Configure SWI instance used. + + +#ifndef APP_TIMER_CONFIG_SWI_NUMBER +#define APP_TIMER_CONFIG_SWI_NUMBER 0 +#endif + +// </h> +//========================================================== + +// </e> + +// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module +//========================================================== +#ifndef NRF_BALLOC_ENABLED +#define NRF_BALLOC_ENABLED 1 +#endif +// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module. +//========================================================== +#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED +#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0 +#endif +// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard. <0-255> + + +#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS +#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1 +#endif + +// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard. <0-255> + + +#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS +#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1 +#endif + +// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED - Enables basic checks in this module. + + +#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED +#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0 +#endif + +// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED - Enables double memory free check in this module. + + +#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED +#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0 +#endif + +// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED - Enables free memory corruption check in this module. + + +#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED +#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0 +#endif + +// <q> NRF_BALLOC_CLI_CMDS - Enable CLI commands specific to the module + + +#ifndef NRF_BALLOC_CLI_CMDS +#define NRF_BALLOC_CLI_CMDS 0 +#endif + +// </e> + +// </e> + +// <q> NRF_FPRINTF_ENABLED - nrf_fprintf - fprintf function. + + +#ifndef NRF_FPRINTF_ENABLED +#define NRF_FPRINTF_ENABLED 1 +#endif + +// <q> NRF_MEMOBJ_ENABLED - nrf_memobj - Linked memory allocator module + + +#ifndef NRF_MEMOBJ_ENABLED +#define NRF_MEMOBJ_ENABLED 1 +#endif + +// <q> NRF_SECTION_ITER_ENABLED - nrf_section_iter - Section iterator + + +#ifndef NRF_SECTION_ITER_ENABLED +#define NRF_SECTION_ITER_ENABLED 1 +#endif + +// <q> NRF_STRERROR_ENABLED - nrf_strerror - Library for converting error code to string. + + +#ifndef NRF_STRERROR_ENABLED +#define NRF_STRERROR_ENABLED 1 +#endif + +// <h> app_button - buttons handling module + +//========================================================== +// <q> BUTTON_ENABLED - Enables Button module + + +#ifndef BUTTON_ENABLED +#define BUTTON_ENABLED 1 +#endif + +// <q> BUTTON_HIGH_ACCURACY_ENABLED - Enables GPIOTE high accuracy for buttons + + +#ifndef BUTTON_HIGH_ACCURACY_ENABLED +#define BUTTON_HIGH_ACCURACY_ENABLED 0 +#endif + +// </h> +//========================================================== + +// </h> +//========================================================== + +// <h> nRF_Log + +//========================================================== +// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED - nrf_log_str_formatter - Log string formatter + + +#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED +#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1 +#endif + +// <h> nrf_log - Logger + +//========================================================== +// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK +//========================================================== +#ifndef NRF_LOG_ENABLED +#define NRF_LOG_ENABLED 0 +#endif +// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string +//========================================================== +#ifndef NRF_LOG_USES_COLORS +#define NRF_LOG_USES_COLORS 0 +#endif +// <o> NRF_LOG_COLOR_DEFAULT - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_COLOR_DEFAULT +#define NRF_LOG_COLOR_DEFAULT 0 +#endif + +// <o> NRF_LOG_ERROR_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_ERROR_COLOR +#define NRF_LOG_ERROR_COLOR 2 +#endif + +// <o> NRF_LOG_WARNING_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_WARNING_COLOR +#define NRF_LOG_WARNING_COLOR 4 +#endif + +// </e> + +// <o> NRF_LOG_DEFAULT_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_LOG_DEFAULT_LEVEL +#define NRF_LOG_DEFAULT_LEVEL 3 +#endif + +// <q> NRF_LOG_DEFERRED - Enable deffered logger. + + +// <i> Log data is buffered and can be processed in idle. + +#ifndef NRF_LOG_DEFERRED +#define NRF_LOG_DEFERRED 1 +#endif + +// <o> NRF_LOG_BUFSIZE - Size of the buffer for storing logs (in bytes). + + +// <i> Must be power of 2 and multiple of 4. +// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum. +// <128=> 128 +// <256=> 256 +// <512=> 512 +// <1024=> 1024 +// <2048=> 2048 +// <4096=> 4096 +// <8192=> 8192 +// <16384=> 16384 + +#ifndef NRF_LOG_BUFSIZE +#define NRF_LOG_BUFSIZE 1024 +#endif + +// <q> NRF_LOG_ALLOW_OVERFLOW - Configures behavior when circular buffer is full. + + +// <i> If set then oldest logs are overwritten. Otherwise a +// <i> marker is injected informing about overflow. + +#ifndef NRF_LOG_ALLOW_OVERFLOW +#define NRF_LOG_ALLOW_OVERFLOW 1 +#endif + +// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping + +// <i> Function for getting the timestamp is provided by the user +//========================================================== +#ifndef NRF_LOG_USES_TIMESTAMP +#define NRF_LOG_USES_TIMESTAMP 0 +#endif +// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) +#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY +#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768 +#endif + +// </e> + +// <q> NRF_LOG_FILTERS_ENABLED - Enable dynamic filtering of logs. + + +#ifndef NRF_LOG_FILTERS_ENABLED +#define NRF_LOG_FILTERS_ENABLED 0 +#endif + +// <q> NRF_LOG_CLI_CMDS - Enable CLI commands for the module. + + +#ifndef NRF_LOG_CLI_CMDS +#define NRF_LOG_CLI_CMDS 0 +#endif + +// <h> Log message pool - Configuration of log message pool + +//========================================================== +// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. +// <i> If a small value is set, then performance of logs processing +// <i> is degraded because data is fragmented. Bigger value impacts +// <i> RAM memory utilization. The size is set to fit a message with +// <i> a timestamp and up to 2 arguments in a single memory object. + +#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE +#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20 +#endif + +// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects +// <i> If a small value is set, then it may lead to a deadlock +// <i> in certain cases if backend has high latency and holds +// <i> multiple messages for long time. Bigger value impacts +// <i> RAM memory usage. + +#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT +#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8 +#endif + +// </h> +//========================================================== + +// </e> + +// <h> nrf_log module configuration + +//========================================================== +// <h> nrf_log in nRF_Core + +//========================================================== +// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_MPU_CONFIG_LOG_ENABLED +#define NRF_MPU_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_MPU_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_MPU_CONFIG_LOG_LEVEL +#define NRF_MPU_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_MPU_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MPU_CONFIG_INFO_COLOR +#define NRF_MPU_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_MPU_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MPU_CONFIG_DEBUG_COLOR +#define NRF_MPU_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED +#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL +#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR +#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR +#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED +#define TASK_MANAGER_CONFIG_LOG_ENABLED 0 +#endif +// <o> TASK_MANAGER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL +#define TASK_MANAGER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TASK_MANAGER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TASK_MANAGER_CONFIG_INFO_COLOR +#define TASK_MANAGER_CONFIG_INFO_COLOR 0 +#endif + +// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR +#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// <h> nrf_log in nRF_Drivers + +//========================================================== +// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef CLOCK_CONFIG_LOG_ENABLED +#define CLOCK_CONFIG_LOG_ENABLED 0 +#endif +// <o> CLOCK_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef CLOCK_CONFIG_LOG_LEVEL +#define CLOCK_CONFIG_LOG_LEVEL 3 +#endif + +// <o> CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef CLOCK_CONFIG_INFO_COLOR +#define CLOCK_CONFIG_INFO_COLOR 0 +#endif + +// <o> CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef CLOCK_CONFIG_DEBUG_COLOR +#define CLOCK_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef COMP_CONFIG_LOG_ENABLED +#define COMP_CONFIG_LOG_ENABLED 0 +#endif +// <o> COMP_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef COMP_CONFIG_LOG_LEVEL +#define COMP_CONFIG_LOG_LEVEL 3 +#endif + +// <o> COMP_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef COMP_CONFIG_INFO_COLOR +#define COMP_CONFIG_INFO_COLOR 0 +#endif + +// <o> COMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef COMP_CONFIG_DEBUG_COLOR +#define COMP_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef GPIOTE_CONFIG_LOG_ENABLED +#define GPIOTE_CONFIG_LOG_ENABLED 0 +#endif +// <o> GPIOTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef GPIOTE_CONFIG_LOG_LEVEL +#define GPIOTE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef GPIOTE_CONFIG_INFO_COLOR +#define GPIOTE_CONFIG_INFO_COLOR 0 +#endif + +// <o> GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef GPIOTE_CONFIG_DEBUG_COLOR +#define GPIOTE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef LPCOMP_CONFIG_LOG_ENABLED +#define LPCOMP_CONFIG_LOG_ENABLED 0 +#endif +// <o> LPCOMP_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef LPCOMP_CONFIG_LOG_LEVEL +#define LPCOMP_CONFIG_LOG_LEVEL 3 +#endif + +// <o> LPCOMP_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef LPCOMP_CONFIG_INFO_COLOR +#define LPCOMP_CONFIG_INFO_COLOR 0 +#endif + +// <o> LPCOMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef LPCOMP_CONFIG_DEBUG_COLOR +#define LPCOMP_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PDM_CONFIG_LOG_ENABLED +#define PDM_CONFIG_LOG_ENABLED 0 +#endif +// <o> PDM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PDM_CONFIG_LOG_LEVEL +#define PDM_CONFIG_LOG_LEVEL 3 +#endif + +// <o> PDM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PDM_CONFIG_INFO_COLOR +#define PDM_CONFIG_INFO_COLOR 0 +#endif + +// <o> PDM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PDM_CONFIG_DEBUG_COLOR +#define PDM_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PPI_CONFIG_LOG_ENABLED +#define PPI_CONFIG_LOG_ENABLED 0 +#endif +// <o> PPI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PPI_CONFIG_LOG_LEVEL +#define PPI_CONFIG_LOG_LEVEL 3 +#endif + +// <o> PPI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PPI_CONFIG_INFO_COLOR +#define PPI_CONFIG_INFO_COLOR 0 +#endif + +// <o> PPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PPI_CONFIG_DEBUG_COLOR +#define PPI_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PWM_CONFIG_LOG_ENABLED +#define PWM_CONFIG_LOG_ENABLED 0 +#endif +// <o> PWM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PWM_CONFIG_LOG_LEVEL +#define PWM_CONFIG_LOG_LEVEL 3 +#endif + +// <o> PWM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PWM_CONFIG_INFO_COLOR +#define PWM_CONFIG_INFO_COLOR 0 +#endif + +// <o> PWM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PWM_CONFIG_DEBUG_COLOR +#define PWM_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef QDEC_CONFIG_LOG_ENABLED +#define QDEC_CONFIG_LOG_ENABLED 0 +#endif +// <o> QDEC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef QDEC_CONFIG_LOG_LEVEL +#define QDEC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> QDEC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef QDEC_CONFIG_INFO_COLOR +#define QDEC_CONFIG_INFO_COLOR 0 +#endif + +// <o> QDEC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef QDEC_CONFIG_DEBUG_COLOR +#define QDEC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef RNG_CONFIG_LOG_ENABLED +#define RNG_CONFIG_LOG_ENABLED 0 +#endif +// <o> RNG_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef RNG_CONFIG_LOG_LEVEL +#define RNG_CONFIG_LOG_LEVEL 3 +#endif + +// <o> RNG_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RNG_CONFIG_INFO_COLOR +#define RNG_CONFIG_INFO_COLOR 0 +#endif + +// <o> RNG_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RNG_CONFIG_DEBUG_COLOR +#define RNG_CONFIG_DEBUG_COLOR 0 +#endif + +// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED - Enables logging of random numbers. + + +#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED +#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0 +#endif + +// </e> + +// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef RTC_CONFIG_LOG_ENABLED +#define RTC_CONFIG_LOG_ENABLED 0 +#endif +// <o> RTC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef RTC_CONFIG_LOG_LEVEL +#define RTC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> RTC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RTC_CONFIG_INFO_COLOR +#define RTC_CONFIG_INFO_COLOR 0 +#endif + +// <o> RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RTC_CONFIG_DEBUG_COLOR +#define RTC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SAADC_CONFIG_LOG_ENABLED +#define SAADC_CONFIG_LOG_ENABLED 0 +#endif +// <o> SAADC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SAADC_CONFIG_LOG_LEVEL +#define SAADC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SAADC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SAADC_CONFIG_INFO_COLOR +#define SAADC_CONFIG_INFO_COLOR 0 +#endif + +// <o> SAADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SAADC_CONFIG_DEBUG_COLOR +#define SAADC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SPIS_CONFIG_LOG_ENABLED +#define SPIS_CONFIG_LOG_ENABLED 0 +#endif +// <o> SPIS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SPIS_CONFIG_LOG_LEVEL +#define SPIS_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPIS_CONFIG_INFO_COLOR +#define SPIS_CONFIG_INFO_COLOR 0 +#endif + +// <o> SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPIS_CONFIG_DEBUG_COLOR +#define SPIS_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SPI_CONFIG_LOG_ENABLED +#define SPI_CONFIG_LOG_ENABLED 0 +#endif +// <o> SPI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SPI_CONFIG_LOG_LEVEL +#define SPI_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SPI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPI_CONFIG_INFO_COLOR +#define SPI_CONFIG_INFO_COLOR 0 +#endif + +// <o> SPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPI_CONFIG_DEBUG_COLOR +#define SPI_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TIMER_CONFIG_LOG_ENABLED +#define TIMER_CONFIG_LOG_ENABLED 0 +#endif +// <o> TIMER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TIMER_CONFIG_LOG_LEVEL +#define TIMER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TIMER_CONFIG_INFO_COLOR +#define TIMER_CONFIG_INFO_COLOR 0 +#endif + +// <o> TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TIMER_CONFIG_DEBUG_COLOR +#define TIMER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TWIS_CONFIG_LOG_ENABLED +#define TWIS_CONFIG_LOG_ENABLED 0 +#endif +// <o> TWIS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TWIS_CONFIG_LOG_LEVEL +#define TWIS_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TWIS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWIS_CONFIG_INFO_COLOR +#define TWIS_CONFIG_INFO_COLOR 0 +#endif + +// <o> TWIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWIS_CONFIG_DEBUG_COLOR +#define TWIS_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TWI_CONFIG_LOG_ENABLED +#define TWI_CONFIG_LOG_ENABLED 0 +#endif +// <o> TWI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TWI_CONFIG_LOG_LEVEL +#define TWI_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TWI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWI_CONFIG_INFO_COLOR +#define TWI_CONFIG_INFO_COLOR 0 +#endif + +// <o> TWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWI_CONFIG_DEBUG_COLOR +#define TWI_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef UART_CONFIG_LOG_ENABLED +#define UART_CONFIG_LOG_ENABLED 0 +#endif +// <o> UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef UART_CONFIG_LOG_LEVEL +#define UART_CONFIG_LOG_LEVEL 3 +#endif + +// <o> UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef UART_CONFIG_INFO_COLOR +#define UART_CONFIG_INFO_COLOR 0 +#endif + +// <o> UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef UART_CONFIG_DEBUG_COLOR +#define UART_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module +//========================================================== +#ifndef USBD_CONFIG_LOG_ENABLED +#define USBD_CONFIG_LOG_ENABLED 0 +#endif +// <o> USBD_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef USBD_CONFIG_LOG_LEVEL +#define USBD_CONFIG_LOG_LEVEL 3 +#endif + +// <o> USBD_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef USBD_CONFIG_INFO_COLOR +#define USBD_CONFIG_INFO_COLOR 0 +#endif + +// <o> USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef USBD_CONFIG_DEBUG_COLOR +#define USBD_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef WDT_CONFIG_LOG_ENABLED +#define WDT_CONFIG_LOG_ENABLED 0 +#endif +// <o> WDT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef WDT_CONFIG_LOG_LEVEL +#define WDT_CONFIG_LOG_LEVEL 3 +#endif + +// <o> WDT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef WDT_CONFIG_INFO_COLOR +#define WDT_CONFIG_INFO_COLOR 0 +#endif + +// <o> WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef WDT_CONFIG_DEBUG_COLOR +#define WDT_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// <h> nrf_log in nRF_Libraries + +//========================================================== +// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_TIMER_CONFIG_LOG_ENABLED +#define APP_TIMER_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_TIMER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_TIMER_CONFIG_LOG_LEVEL +#define APP_TIMER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. + + +// <i> If module generates a lot of logs, initial log level can +// <i> be decreased to prevent flooding. Severity level can be +// <i> increased on instance basis. +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL +#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3 +#endif + +// <o> APP_TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_TIMER_CONFIG_INFO_COLOR +#define APP_TIMER_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_TIMER_CONFIG_DEBUG_COLOR +#define APP_TIMER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED +#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL +#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR +#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR +#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED +#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL +#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR +#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR +#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED +#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL +#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_MSC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR +#define APP_USBD_MSC_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR +#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED +#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL +#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL +#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3 +#endif + +// <o> NRF_ATFIFO_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR +#define NRF_ATFIFO_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR +#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED +#define NRF_BALLOC_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_BALLOC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL +#define NRF_BALLOC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. + + +// <i> If module generates a lot of logs, initial log level can +// <i> be decreased to prevent flooding. Severity level can be +// <i> increased on instance basis. +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL +#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3 +#endif + +// <o> NRF_BALLOC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_BALLOC_CONFIG_INFO_COLOR +#define NRF_BALLOC_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR +#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED +#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL +#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR +#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR +#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED +#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL +#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR +#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR +#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED +#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL +#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_CLI_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR +#define NRF_CLI_UART_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR +#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED +#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL +#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR +#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR +#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED +#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL +#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR +#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR +#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED +#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL +#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR +#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR +#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED +#define NRF_QUEUE_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_QUEUE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL +#define NRF_QUEUE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL +#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3 +#endif + +// <o> NRF_QUEUE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_QUEUE_CONFIG_INFO_COLOR +#define NRF_QUEUE_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR +#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module. +//========================================================== +#ifndef NRF_SDH_ANT_LOG_ENABLED +#define NRF_SDH_ANT_LOG_ENABLED 1 +#endif +// <o> NRF_SDH_ANT_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_ANT_LOG_LEVEL +#define NRF_SDH_ANT_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_ANT_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_ANT_INFO_COLOR +#define NRF_SDH_ANT_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_ANT_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_ANT_DEBUG_COLOR +#define NRF_SDH_ANT_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module. +//========================================================== +#ifndef NRF_SDH_BLE_LOG_ENABLED +#define NRF_SDH_BLE_LOG_ENABLED 0 +#endif +// <o> NRF_SDH_BLE_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_BLE_LOG_LEVEL +#define NRF_SDH_BLE_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_BLE_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_BLE_INFO_COLOR +#define NRF_SDH_BLE_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_BLE_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_BLE_DEBUG_COLOR +#define NRF_SDH_BLE_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module. +//========================================================== +#ifndef NRF_SDH_LOG_ENABLED +#define NRF_SDH_LOG_ENABLED 1 +#endif +// <o> NRF_SDH_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_LOG_LEVEL +#define NRF_SDH_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_INFO_COLOR +#define NRF_SDH_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_DEBUG_COLOR +#define NRF_SDH_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module. +//========================================================== +#ifndef NRF_SDH_SOC_LOG_ENABLED +#define NRF_SDH_SOC_LOG_ENABLED 1 +#endif +// <o> NRF_SDH_SOC_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_SOC_LOG_LEVEL +#define NRF_SDH_SOC_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_SOC_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_SOC_INFO_COLOR +#define NRF_SDH_SOC_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_SOC_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_SOC_DEBUG_COLOR +#define NRF_SDH_SOC_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED +#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL +#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_SORTLIST_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR +#define NRF_SORTLIST_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR +#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED +#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL +#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR +#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR +#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// <h> nrf_log in nRF_Serialization + +//========================================================== +// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED +#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0 +#endif +// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL +#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR +#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0 +#endif + +// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR +#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// </h> +//========================================================== + +// </h> +//========================================================== + +// </h> +//========================================================== + +// <h> nRF_SoftDevice + +//========================================================== +// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler +//========================================================== +#ifndef NRF_SDH_ANT_ENABLED +#define NRF_SDH_ANT_ENABLED 1 +#endif +// <h> ANT Channels + +//========================================================== +// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels. +#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED +#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 1 +#endif + +// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels. +#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS +#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0 +#endif + +// </h> +//========================================================== + +// <h> ANT Queues + +//========================================================== +// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size. +#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE +#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32 +#endif + +// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size. +#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE +#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128 +#endif + +// </h> +//========================================================== + +// <h> ANT Observers - Observers and priority levels + +//========================================================== +// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers. +// <i> This setting configures the number of priority levels available for the ANT event handlers. +// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers. + +#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS +#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2 +#endif + +// <h> ANT Observers priorities - Invididual priorities + +//========================================================== +// <o> ANT_BPWR_ANT_OBSERVER_PRIO +// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile. + +#ifndef ANT_BPWR_ANT_OBSERVER_PRIO +#define ANT_BPWR_ANT_OBSERVER_PRIO 1 +#endif + +// <o> ANT_BSC_ANT_OBSERVER_PRIO +// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile. + +#ifndef ANT_BSC_ANT_OBSERVER_PRIO +#define ANT_BSC_ANT_OBSERVER_PRIO 1 +#endif + +// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO +// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module. + +#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO +#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1 +#endif + +// <o> ANT_HRM_ANT_OBSERVER_PRIO +// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor. + +#ifndef ANT_HRM_ANT_OBSERVER_PRIO +#define ANT_HRM_ANT_OBSERVER_PRIO 1 +#endif + +// <o> ANT_SDM_ANT_OBSERVER_PRIO +// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile. + +#ifndef ANT_SDM_ANT_OBSERVER_PRIO +#define ANT_SDM_ANT_OBSERVER_PRIO 1 +#endif + +// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO +// <i> Priority with which ANT events are dispatched to the ANT state indicator module. + +#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO +#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1 +#endif + +// <o> BSP_BTN_ANT_OBSERVER_PRIO +// <i> Priority with which ANT events are dispatched to the Button Control module. + +#ifndef BSP_BTN_ANT_OBSERVER_PRIO +#define BSP_BTN_ANT_OBSERVER_PRIO 1 +#endif + +// </h> +//========================================================== + +// </h> +//========================================================== + + +// </e> + +// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler +//========================================================== +#ifndef NRF_SDH_ENABLED +#define NRF_SDH_ENABLED 1 +#endif +// <h> Dispatch model + +// <i> This setting configures how Stack events are dispatched to the application. +//========================================================== +// <o> NRF_SDH_DISPATCH_MODEL + + +// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context. +// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler. +// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually. +// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT +// <1=> NRF_SDH_DISPATCH_MODEL_APPSH +// <2=> NRF_SDH_DISPATCH_MODEL_POLLING + +#ifndef NRF_SDH_DISPATCH_MODEL +#define NRF_SDH_DISPATCH_MODEL 1 +#endif + +// </h> +//========================================================== + +// <h> Clock - SoftDevice clock configuration + +//========================================================== +// <o> NRF_SDH_CLOCK_LF_SRC - SoftDevice clock source. + +// <0=> NRF_CLOCK_LF_SRC_RC +// <1=> NRF_CLOCK_LF_SRC_XTAL +// <2=> NRF_CLOCK_LF_SRC_SYNTH + +#ifndef NRF_SDH_CLOCK_LF_SRC +#define NRF_SDH_CLOCK_LF_SRC 1 +#endif + +// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. +#ifndef NRF_SDH_CLOCK_LF_RC_CTIV +#define NRF_SDH_CLOCK_LF_RC_CTIV 0 +#endif + +// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. +// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated +// <i> if the temperature has not changed. + +#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV +#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0 +#endif + +// <o> NRF_SDH_CLOCK_LF_ACCURACY - External clock accuracy used in the LL to compute timing. + +// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM +// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM +// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM +// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM +// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM +// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM +// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM +// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM +// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM +// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM +// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM +// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM + +#ifndef NRF_SDH_CLOCK_LF_ACCURACY +#define NRF_SDH_CLOCK_LF_ACCURACY 7 +#endif + +// </h> +//========================================================== + +// <h> SDH Observers - Observers and priority levels + +//========================================================== +// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. +// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers. +// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers. + +#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS +#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2 +#endif + +// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. +// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers. +// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers. + +#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS +#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2 +#endif + +// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. +// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC). +// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers. + +#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS +#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2 +#endif + + +// <h> State Observers priorities - Invididual priorities + +//========================================================== +// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO +// <i> Priority with which state events are dispatched to the Clock driver. + +#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO +#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0 +#endif + +// <o> POWER_CONFIG_STATE_OBSERVER_PRIO +// <i> Priority with which state events are dispatched to the Power driver. + +#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO +#define POWER_CONFIG_STATE_OBSERVER_PRIO 0 +#endif + +// <o> RNG_CONFIG_STATE_OBSERVER_PRIO +// <i> Priority with which state events are dispatched to this module. + +#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO +#define RNG_CONFIG_STATE_OBSERVER_PRIO 0 +#endif + +// </h> +//========================================================== + +// <h> Stack Event Observers priorities - Invididual priorities + +//========================================================== +// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO +// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack. +// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC. +// <i> Zero is the highest priority. + +#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO +#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0 +#endif + +// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO +// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack. +// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC. +// <i> Zero is the highest priority. + +#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO +#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0 +#endif + +// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO +// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack. +// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE. +// <i> Zero is the highest priority. + +#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO +#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0 +#endif + +// </h> +//========================================================== + +// </h> +//========================================================== + + +// </e> + +// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler +//========================================================== +#ifndef NRF_SDH_SOC_ENABLED +#define NRF_SDH_SOC_ENABLED 1 +#endif +// <h> SoC Observers - Observers and priority levels + +//========================================================== +// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. +// <i> This setting configures the number of priority levels available for the SoC event handlers. +// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers. + +#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS +#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2 +#endif + +// <h> SoC Observers priorities - Invididual priorities + +//========================================================== +// <o> BLE_ADV_SOC_OBSERVER_PRIO +// <i> Priority with which SoC events are dispatched to the Advertising module. + +#ifndef BLE_ADV_SOC_OBSERVER_PRIO +#define BLE_ADV_SOC_OBSERVER_PRIO 1 +#endif + +// <o> BLE_DFU_SOC_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the DFU Service. + +#ifndef BLE_DFU_SOC_OBSERVER_PRIO +#define BLE_DFU_SOC_OBSERVER_PRIO 1 +#endif + +// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO +// <i> Priority with which SoC events are dispatched to the Clock driver. + +#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO +#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0 +#endif + +// <o> POWER_CONFIG_SOC_OBSERVER_PRIO +// <i> Priority with which SoC events are dispatched to the Power driver. + +#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO +#define POWER_CONFIG_SOC_OBSERVER_PRIO 0 +#endif + +// </h> +//========================================================== + +// </h> +//========================================================== + + +// </e> + +// </h> +//========================================================== + +// <<< end of configuration section >>> +#endif //SDK_CONFIG_H + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/ses/dfu_experimental_dual_bank_ant_pca10040_s212.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/ses/dfu_experimental_dual_bank_ant_pca10040_s212.emProject new file mode 100644 index 0000000..aa226fa --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/ses/dfu_experimental_dual_bank_ant_pca10040_s212.emProject @@ -0,0 +1,97 @@ +<!DOCTYPE CrossStudio_Project_File> +<solution Name="dfu_experimental_dual_bank_ant_pca10040_s212" target="8" version="2"> + <project Name="dfu_experimental_dual_bank_ant_pca10040_s212"> + <configuration + Name="Common" + arm_architecture="v7EM" + arm_core_type="Cortex-M4" + arm_endian="Little" + arm_fp_abi="Hard" + arm_fpu_type="FPv4-SP-D16" + arm_linker_heap_size="0" + arm_linker_process_stack_size="0" + arm_linker_stack_size="8192" + arm_linker_treat_warnings_as_errors="No" + arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD" + arm_target_device_name="nRF52832_xxAA" + arm_target_interface_type="SWD" + c_user_include_directories="../../../config;../../..;../../../include;../../../include/boot_common;../../../../../../../components;../../../../../../../components/ant/ant_fs;../../../../../../../components/ant/ant_key_manager;../../../../../../../components/ant/ant_key_manager/config;../../../../../../../components/boards;../../../../../../../components/libraries/atomic;../../../../../../../components/libraries/balloc;../../../../../../../components/libraries/bsp;../../../../../../../components/libraries/button;../../../../../../../components/libraries/delay;../../../../../../../components/libraries/experimental_log;../../../../../../../components/libraries/experimental_log/src;../../../../../../../components/libraries/experimental_memobj;../../../../../../../components/libraries/experimental_section_vars;../../../../../../../components/libraries/scheduler;../../../../../../../components/libraries/strerror;../../../../../../../components/libraries/timer;../../../../../../../components/libraries/util;../../../../../../../components/softdevice/common;../../../../../../../components/softdevice/s212/headers;../../../../../../../components/softdevice/s212/headers/nrf52;../../../../../../../components/toolchain/cmsis/include;../../../../../../../external/fprintf;../../../../../../../integration/nrfx;../../../../../../../integration/nrfx/legacy;../../../../../../../modules/nrfx;../../../../../../../modules/nrfx/drivers/include;../../../../../../../modules/nrfx/hal;../../../../../../../modules/nrfx/mdk;../config;" + c_preprocessor_definitions="ANT_STACK_SUPPORT_REQD;BOARD_PCA10040;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52;NRF52832_XXAA;NRF52_PAN_74;S212;SOFTDEVICE_PRESENT;SWI_DISABLE0;" + debug_target_connection="J-Link" + gcc_entry_point="Reset_Handler" + macros="CMSIS_CONFIG_TOOL=../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar" + debug_register_definition_file="../../../../../../../modules/nrfx/mdk/nrf52.svd" + debug_start_from_entry_point_symbol="No" + gcc_debugging_level="Level 3" linker_output_format="hex" + linker_printf_width_precision_supported="Yes" + linker_printf_fmt_level="long" + linker_section_placement_file="flash_placement.xml" + linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x80000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x10000;FLASH_START=0x79000;FLASH_SIZE=0x5000;RAM_START=0x20002800;RAM_SIZE=0xd800" + linker_section_placements_segments="FLASH RX 0x0 0x80000;RAM RWX 0x20000000 0x10000;boot_settings_pending RX 0x0007E000 0x1000;boot_settings RX 0x0007F000 0x1000;uicr_boot_start_address RX 0x10001014 0x4;uicr_mbr_retaining_address RX 0x10001018 0x4" + project_directory="" + project_type="Executable" /> + <folder Name="Segger Startup Files"> + <file file_name="$(StudioDir)/source/thumb_crt0.s" /> + </folder> + <folder Name="nRF_Log"> + <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" /> + <file file_name="../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" /> + </folder> + <folder Name="Board Definition"> + <file file_name="../../../../../../../components/boards/boards.c" /> + </folder> + <folder Name="nRF_Libraries"> + <file file_name="../../../../../../../components/libraries/button/app_button.c" /> + <file file_name="../../../../../../../components/libraries/util/app_error.c" /> + <file file_name="../../../../../../../components/libraries/util/app_error_handler_gcc.c" /> + <file file_name="../../../../../../../components/libraries/util/app_error_weak.c" /> + <file file_name="../../../../../../../components/libraries/scheduler/app_scheduler.c" /> + <file file_name="../../../../../../../components/libraries/timer/app_timer.c" /> + <file file_name="../../../../../../../components/libraries/util/app_util_platform.c" /> + <file file_name="../../../../../../../components/libraries/util/nrf_assert.c" /> + <file file_name="../../../../../../../components/libraries/atomic/nrf_atomic.c" /> + <file file_name="../../../../../../../components/libraries/balloc/nrf_balloc.c" /> + <file file_name="../../../../../../../external/fprintf/nrf_fprintf.c" /> + <file file_name="../../../../../../../external/fprintf/nrf_fprintf_format.c" /> + <file file_name="../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" /> + <file file_name="../../../../../../../components/libraries/experimental_section_vars/nrf_section_iter.c" /> + <file file_name="../../../../../../../components/libraries/strerror/nrf_strerror.c" /> + </folder> + <folder Name="nRF_Drivers"> + <file file_name="../../../../../../../modules/nrfx/drivers/src/nrfx_gpiote.c" /> + </folder> + <folder Name="nRF_ANT"> + <file file_name="../../../../../../../components/ant/ant_key_manager/ant_key_manager.c" /> + <file file_name="../../../../../../../components/ant/ant_fs/antfs.c" /> + <file file_name="../../../../../../../components/ant/ant_fs/crc.c" /> + </folder> + <folder Name="Board Support"> + <file file_name="../../../../../../../components/libraries/bsp/bsp.c" /> + </folder> + <folder Name="Application"> + <file file_name="../../../antfs_ota.c" /> + <file file_name="../../../bootloader.c" /> + <file file_name="../../../bootloader_util.c" /> + <file file_name="../../../bootloader_util_gcc.c" /> + <file file_name="../../../debug_pin.c" /> + <file file_name="../../../dfu_dual_bank.c" /> + <file file_name="../../../dfu_transport_ant.c" /> + <file file_name="../../../main.c" /> + <file file_name="../../../pstorage.c" /> + <file file_name="../config/sdk_config.h" /> + </folder> + <folder Name="None"> + <file file_name="../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" /> + <file file_name="../../../../../../../modules/nrfx/mdk/ses_nrf52_Vectors.s" /> + <file file_name="../../../../../../../modules/nrfx/mdk/system_nrf52.c" /> + </folder> + <folder Name="nRF_SoftDevice"> + <file file_name="../../../../../../../components/softdevice/common/nrf_sdh.c" /> + <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_ant.c" /> + <file file_name="../../../../../../../components/softdevice/common/nrf_sdh_soc.c" /> + </folder> + </project> + <configuration Name="Release" + c_preprocessor_definitions="NDEBUG" + gcc_optimization_level="Optimize For Size" /> +</solution> diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/ses/dfu_experimental_dual_bank_ant_pca10040_s212.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/ses/dfu_experimental_dual_bank_ant_pca10040_s212.emSession new file mode 100644 index 0000000..d9d510b --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/ses/dfu_experimental_dual_bank_ant_pca10040_s212.emSession @@ -0,0 +1,7 @@ +<!DOCTYPE CrossStudio_Session_File> +<session> + <ARMCrossStudioWindow activeProject="dfu_experimental_dual_bank_ant_pca10040_s212" buildConfiguration="Release"/> + <Files> + <SessionOpenFile codecName="Default" debugPath="../../../main.c" left="0" name="unnamed" path="../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/> + </Files> +</session>
\ No newline at end of file diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/ses/flash_placement.xml new file mode 100644 index 0000000..e3760ea --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/experimental/ant_bootloader/pca10040/dual_bank_ant_s212/ses/flash_placement.xml @@ -0,0 +1,54 @@ +<!DOCTYPE Linker_Placement_File> +<Root name="Flash Section Placement"> + <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)"> + <ProgramSection load="no" name=".reserved_flash" start="$(FLASH_PH_START)" size="$(FLASH_START)-$(FLASH_PH_START)" /> + <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" /> + <ProgramSection alignment="4" load="Yes" name=".init" /> + <ProgramSection alignment="4" load="Yes" name=".init_rodata" /> + <ProgramSection alignment="4" load="Yes" name=".text" /> + <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_ant_observers" inputsections="*(SORT(.sdh_ant_observers*))" address_symbol="__start_sdh_ant_observers" end_symbol="__stop_sdh_ant_observers" /> + <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_soc_observers" inputsections="*(SORT(.sdh_soc_observers*))" address_symbol="__start_sdh_soc_observers" end_symbol="__stop_sdh_soc_observers" /> + <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" /> + <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" /> + <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_state_observers" inputsections="*(SORT(.sdh_state_observers*))" address_symbol="__start_sdh_state_observers" end_symbol="__stop_sdh_state_observers" /> + <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_stack_observers" inputsections="*(SORT(.sdh_stack_observers*))" address_symbol="__start_sdh_stack_observers" end_symbol="__stop_sdh_stack_observers" /> + <ProgramSection alignment="4" keep="Yes" load="Yes" name=".sdh_req_observers" inputsections="*(SORT(.sdh_req_observers*))" address_symbol="__start_sdh_req_observers" end_symbol="__stop_sdh_req_observers" /> + <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" /> + <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data" inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/> + <ProgramSection alignment="4" load="Yes" name=".dtors" /> + <ProgramSection alignment="4" load="Yes" name=".ctors" /> + <ProgramSection alignment="4" load="Yes" name=".rodata" /> + <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" /> + <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" /> + <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" /> + <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" /> + </MemorySegment> + <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)"> + <ProgramSection load="no" name=".reserved_ram" start="$(RAM_PH_START)" size="$(RAM_START)-$(RAM_PH_START)" /> + <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/> + <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" /> + <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" /> + <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" /> + <ProgramSection alignment="4" load="No" name=".fast_run" /> + <ProgramSection alignment="4" load="No" name=".data_run" /> + <ProgramSection alignment="4" load="No" name=".tdata_run" /> + <ProgramSection alignment="4" load="No" name=".bss" /> + <ProgramSection alignment="4" load="No" name=".tbss" /> + <ProgramSection alignment="4" load="No" name=".non_init" /> + <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" /> + <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack" address_symbol="__StackLimit" end_symbol="__StackTop"/> + <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" /> + </MemorySegment> + <MemorySegment name="boot_settings_pending" start="0x0007E000" size="0x1000"> + <ProgramSection alignment="4" keep="Yes" load="No" name=".boot_settings_pending" address_symbol="__start_boot_settings_pending" end_symbol="__stop_boot_settings_pending" start = "0x0007E000" size="0x1000" /> + </MemorySegment> + <MemorySegment name="boot_settings" start="0x0007F000" size="0x1000"> + <ProgramSection alignment="4" keep="Yes" load="No" name=".boot_settings" address_symbol="__start_boot_settings" end_symbol="__stop_boot_settings" start = "0x0007F000" size="0x1000" /> + </MemorySegment> + <MemorySegment name="uicr_boot_start_address" start="0x10001014" size="0x4"> + <ProgramSection alignment="4" keep="Yes" load="Yes" name=".uicr_boot_start_address" address_symbol="__start_uicr_boot_start_address" end_symbol="__stop_uicr_boot_start_address" start = "0x10001014" size="0x4" /> + </MemorySegment> + <MemorySegment name="uicr_mbr_retaining_address" start="0x10001018" size="0x4"> + <ProgramSection alignment="4" keep="Yes" load="Yes" name=".uicr_mbr_retaining_address" address_symbol="__start_uicr_mbr_retaining_address" end_symbol="__stop_uicr_mbr_retaining_address" start = "0x10001018" size="0x4" /> + </MemorySegment> +</Root> |