summaryrefslogtreecommitdiff
path: root/src/flash
diff options
context:
space:
mode:
authorzwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>2009-06-23 22:42:03 +0000
committerzwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>2009-06-23 22:42:03 +0000
commit3813fda44adcea486b7308423a699f63d79273ee (patch)
treef515b454cfaea4806d0d307c1d19f1e3081482d1 /src/flash
parentaea6815462d3302f7f8b6576f59320d5f5985642 (diff)
downloadopenocd+libswd-3813fda44adcea486b7308423a699f63d79273ee.tar.gz
openocd+libswd-3813fda44adcea486b7308423a699f63d79273ee.tar.bz2
openocd+libswd-3813fda44adcea486b7308423a699f63d79273ee.tar.xz
openocd+libswd-3813fda44adcea486b7308423a699f63d79273ee.zip
- Fixes '==' whitespace
- Replace ')\(==\)\(\w\)' with ') \1 \2'. - Replace '\(\w\)\(==\)\(\w\)' with '\1 \2 \3'. git-svn-id: svn://svn.berlios.de/openocd/trunk@2371 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Diffstat (limited to 'src/flash')
-rw-r--r--src/flash/at91sam7.c2
-rw-r--r--src/flash/flash.c4
-rw-r--r--src/flash/ocl.c4
-rw-r--r--src/flash/ocl/at91sam7x/dcc.c2
-rw-r--r--src/flash/ocl/at91sam7x/samflash.c12
-rw-r--r--src/flash/str9x.c6
6 files changed, 15 insertions, 15 deletions
diff --git a/src/flash/at91sam7.c b/src/flash/at91sam7.c
index 27779a39..8b51b95b 100644
--- a/src/flash/at91sam7.c
+++ b/src/flash/at91sam7.c
@@ -284,7 +284,7 @@ static int at91sam7_flash_command(struct flash_bank_s *bank, uint8_t cmd, uint16
target_write_u32(target, MC_FCR[bank->bank_number], fcr);
LOG_DEBUG("Flash command: 0x%" PRIx32 ", flash bank: %i, page number: %u", fcr, bank->bank_number+1, pagen);
- if ((at91sam7_info->cidr_arch == 0x60) && ((cmd==SLB)|(cmd==CLB)))
+ if ((at91sam7_info->cidr_arch == 0x60) && ((cmd == SLB)|(cmd == CLB)))
{
/* Lock bit manipulation on AT91SAM7A3 waits for FC_FSR bit 1, EOL */
if (at91sam7_wait_status_busy(bank, MC_FSR_EOL, 10)&0x0C)
diff --git a/src/flash/flash.c b/src/flash/flash.c
index 60827594..3b8a883c 100644
--- a/src/flash/flash.c
+++ b/src/flash/flash.c
@@ -654,7 +654,7 @@ static int handle_flash_write_image_command(struct command_context_s *cmd_ctx, c
/* flash auto-erase is disabled by default*/
int auto_erase = 0;
- if (strcmp(args[0], "erase")==0)
+ if (strcmp(args[0], "erase") == 0)
{
auto_erase = 1;
args++;
@@ -894,7 +894,7 @@ static int handle_flash_write_bank_command(struct command_context_s *cmd_ctx, ch
fileio_close(&fileio);
return retvaltemp;
}
- if (retval==ERROR_OK)
+ if (retval == ERROR_OK)
{
command_print(cmd_ctx,
"wrote %lld byte from file %s to flash bank %li at offset 0x%8.8" PRIx32 " in %s (%f kb/s)",
diff --git a/src/flash/ocl.c b/src/flash/ocl.c
index a83f5ea8..e6a342e7 100644
--- a/src/flash/ocl.c
+++ b/src/flash/ocl.c
@@ -172,7 +172,7 @@ static int ocl_write(struct flash_bank_s *bank, uint8_t *buffer, uint32_t offset
int i;
/* check preconditions */
- if (ocl->buflen == 0 || ocl->bufalign==0)
+ if (ocl->buflen == 0 || ocl->bufalign == 0)
return ERROR_FLASH_BANK_NOT_PROBED;
if (bank->target->state != TARGET_RUNNING)
@@ -373,7 +373,7 @@ static int ocl_auto_probe(struct flash_bank_s *bank)
{
ocl_priv_t *ocl = bank->driver_priv;
- if (ocl->buflen == 0 || ocl->bufalign==0)
+ if (ocl->buflen == 0 || ocl->bufalign == 0)
return ERROR_FLASH_BANK_NOT_PROBED;
return ERROR_OK;
diff --git a/src/flash/ocl/at91sam7x/dcc.c b/src/flash/ocl/at91sam7x/dcc.c
index 3507bbe5..a6976595 100644
--- a/src/flash/ocl/at91sam7x/dcc.c
+++ b/src/flash/ocl/at91sam7x/dcc.c
@@ -27,7 +27,7 @@ uint32 dcc_rd(void)
do {
asm volatile ("mrc p14, 0, %0, C0, C0" : "=r" (dcc_reg) : );
- } while ((dcc_reg&1)==0);
+ } while ((dcc_reg&1) == 0);
asm volatile ("mrc p14, 0, %0, C1, C0" : "=r" (dcc_reg) : );
return dcc_reg;
diff --git a/src/flash/ocl/at91sam7x/samflash.c b/src/flash/ocl/at91sam7x/samflash.c
index 893b579f..a534f6d8 100644
--- a/src/flash/ocl/at91sam7x/samflash.c
+++ b/src/flash/ocl/at91sam7x/samflash.c
@@ -86,7 +86,7 @@ int flash_page_program(uint32 *data, int page_num)
else efc_ofs=0;
/* wait until FLASH is ready, just for sure */
- while ((inr(MC_FSR+efc_ofs)&MC_FRDY)==0);
+ while ((inr(MC_FSR+efc_ofs)&MC_FRDY) == 0);
/* calculate page address, only lower 8 bits are used to address the latch,
but the upper part of address is needed for writing to proper EFC */
@@ -103,7 +103,7 @@ int flash_page_program(uint32 *data, int page_num)
outr(MC_FCR+efc_ofs, ((page_num&0x3ff) << 8) | MC_KEY | MC_FCMD_WP);
/* wait until it's done */
- while ((inr(MC_FSR+efc_ofs)&MC_FRDY)==0);
+ while ((inr(MC_FSR+efc_ofs)&MC_FRDY) == 0);
/* check for errors */
if ((inr(MC_FSR+efc_ofs)&MC_PROGE)) return FLASH_STAT_PROGE;
@@ -134,12 +134,12 @@ int flash_erase_plane(int efc_ofs)
if (lockbits&1) {
/* wait until FLASH is ready, just for sure */
- while ((inr(MC_FSR+efc_ofs)&MC_FRDY)==0);
+ while ((inr(MC_FSR+efc_ofs)&MC_FRDY) == 0);
outr(MC_FCR+efc_ofs, ((page_num&0x3ff) << 8) | 0x5a000004);
/* wait until it's done */
- while ((inr(MC_FSR+efc_ofs)&MC_FRDY)==0);
+ while ((inr(MC_FSR+efc_ofs)&MC_FRDY) == 0);
/* check for errors */
if ((inr(MC_FSR+efc_ofs)&MC_PROGE)) return FLASH_STAT_PROGE;
@@ -151,13 +151,13 @@ int flash_erase_plane(int efc_ofs)
}
/* wait until FLASH is ready, just for sure */
- while ((inr(MC_FSR+efc_ofs)&MC_FRDY)==0);
+ while ((inr(MC_FSR+efc_ofs)&MC_FRDY) == 0);
/* erase all command to FCR */
outr(MC_FCR+efc_ofs, 0x5a000008);
/* wait until it's done */
- while ((inr(MC_FSR+efc_ofs)&MC_FRDY)==0);
+ while ((inr(MC_FSR+efc_ofs)&MC_FRDY) == 0);
/* check for errors */
if ((inr(MC_FSR+efc_ofs)&MC_PROGE)) return FLASH_STAT_PROGE;
diff --git a/src/flash/str9x.c b/src/flash/str9x.c
index 2b92d009..73c86da7 100644
--- a/src/flash/str9x.c
+++ b/src/flash/str9x.c
@@ -309,7 +309,7 @@ static int str9x_erase(struct flash_bank_s *bank, int first, int last)
break;
alive_sleep(1);
}
- if (timeout==1000)
+ if (timeout == 1000)
{
LOG_ERROR("erase timed out");
return ERROR_FAIL;
@@ -582,7 +582,7 @@ static int str9x_write(struct flash_bank_s *bank,
break;
alive_sleep(1);
}
- if (timeout==1000)
+ if (timeout == 1000)
{
LOG_ERROR("write timed out");
return ERROR_FAIL;
@@ -631,7 +631,7 @@ static int str9x_write(struct flash_bank_s *bank,
break;
alive_sleep(1);
}
- if (timeout==1000)
+ if (timeout == 1000)
{
LOG_ERROR("write timed out");
return ERROR_FAIL;