Move TCL script files -- Step 2 of 2:

- Move src/tcl to tcl/.
- Update top Makefile.am to use new path name.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1919 b42882b7-edfa-0310-969c-e2dbd0fdcd60

1 files changed, 0 insertions, 92 deletions

diff --git a/src/tcl/target/ti_dm355.cfg b/src/tcl/target/ti_dm355.cfg
deleted file mode 100644
index 1bd5cda5..00000000
--- a/src/tcl/target/ti_dm355.cfg
+++ /dev/null
@@ -1,92 +0,0 @@
-#
-# Texas Instruments DaVinci family:  TMS320DM355
-#
-if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
-} else {
-   set  _CHIPNAME dm355
-}
-if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
-} else {
-   set  _ENDIAN little
-}
-
-#
-# For now, expect EMU0/EMU1 jumpered LOW (not TI's default) so ARM and ETB
-# are enabled without making ICEpick route ARM and ETB into the JTAG chain.
-#
-# Also note:  when running without RTCK before the PLLs are set up, you
-# may need to slow the JTAG clock down quite a lot (under 2 MHz).
-#
-
-# Subsidiary TAP: ARM ETB11, with scan chain for 4K of ETM trace buffer
-if { [info exists ETB_TAPID ] } {
-   set _ETB_TAPID $ETB_TAPID
-} else {
-   set _ETB_TAPID 0x2b900f0f
-}
-jtag newtap $_CHIPNAME etb -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_ETB_TAPID
-
-# Subsidiary TAP: ARM926ejs with scan chains for ARM Debug, EmbeddedICE-RT, ETM.
-if { [info exists CPU_TAPID ] } {
-   set _CPU_TAPID $CPU_TAPID
-} else {
-   set _CPU_TAPID 0x07926001
-}
-jtag newtap $_CHIPNAME arm -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPU_TAPID
-
-# Primary TAP: ICEpick (JTAG route controller) and boundary scan
-if { [info exists JRC_TAPID ] } {
-   set _JRC_TAPID $JRC_TAPID
-} else {
-   set _JRC_TAPID 0x0b73b02f
-}
-jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f -expected-id $_JRC_TAPID
-
-################
-
-# various symbol definitions, to avoid hard-wiring addresses
-# and enable some sharing of DaVinci-family utility code
-global dm355
-set dm355 [ dict create ]
-
-# Physical addresses for controllers and memory
-# (Some of these are valid for many DaVinci family chips)
-dict set dm355 sram0		0x00010000
-dict set dm355 sram1		0x00014000
-dict set dm355 sysbase		0x01c40000
-dict set dm355 pllc1		0x01c40800
-dict set dm355 pllc2		0x01c40c00
-dict set dm355 psc		0x01c41000
-dict set dm355 gpio		0x01c67000
-dict set dm355 a_emif		0x01e10000
-dict set dm355 a_emif_cs0	0x02000000
-dict set dm355 a_emif_cs1	0x04000000
-dict set dm355 ddr_emif		0x20000000
-dict set dm355 ddr		0x80000000
-
-source [find target/davinci.cfg]
-
-################
-# GDB target:  the ARM, using SRAM1 for scratch.  SRAM0 (also 16K)
-# and the ETB memory (4K) are other options, while trace is unused.
-set _TARGETNAME $_CHIPNAME.arm
-
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
-
-# NOTE that work-area-virt presumes a Linux 2.6.30-rc2+ kernel,
-# and that the work area is used only with a kernel mmu context ...
-$_TARGETNAME configure \
-	-work-area-virt [expr 0xfffe0000 + 0x4000] \
-	-work-area-phys [dict get $dm355 sram1] \
-	-work-area-size 0x4000 \
-	-work-area-backup 0
-
-arm7_9 dbgrq enable
-arm7_9 fast_memory_access enable
-arm7_9 dcc_downloads enable
-
-# trace setup
-etm config $_TARGETNAME 16 normal full etb
-etb config $_TARGETNAME $_CHIPNAME.etb