1 files changed, 0 insertions, 61 deletions
diff --git a/src/target/board/str910-eval.cfg b/src/target/board/str910-eval.cfg
deleted file mode 100644
index 10a2100b..00000000
--- a/src/target/board/str910-eval.cfg
+++ /dev/null
@@ -1,61 +0,0 @@
-# str910-eval eval board
-# 
-# Need reset scripts 
-reset_config trst_and_srst
-
-if { [info exists CHIPNAME] } {	
-   set  _CHIPNAME $CHIPNAME    
-} else {	 
-   set  _CHIPNAME str912
-}
-
-if { [info exists ENDIAN] } {	
-   set  _ENDIAN $ENDIAN    
-} else {	 
-   set  _ENDIAN little
-}
-
-if { [info exists FLASHTAPID ] } {
-   set _FLASHTAPID $FLASHTAPID
-} else {
-   set _FLASHTAPID 0x04570041
-}
-jtag newtap $_CHIPNAME flash -irlen 8 -ircapture 0x1 -irmask 0x1 -expected-id $_FLASHTAPID
-
-
-if { [info exists CPUTAPID ] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-   set _CPUTAPID 0x25966041
-}
-jtag newtap $_CHIPNAME cpu   -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-if { [info exists BSTAPID ] } {
-   set _BSTAPID $BSTAPID
-} else {
-   set _BSTAPID 0x1457f041
-}
-jtag newtap $_CHIPNAME bs    -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID
-
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e
-$_TARGETNAME configure -work-area-phys 0x50000000 -work-area-virt 0x50000000 -work-area-size 16384 -work-area-backup 1
-
-$_TARGETNAME configure -event reset-init {
-	# We can increase speed now that we know the target is halted.
-	#jtag_rclk 3000
-	
-	# -- Enable 96K RAM
-	# PFQBC enabled / DTCM & AHB wait-states disabled
-	mww 0x5C002034 0x0191 
-
-	str9x flash_config 0 4 2 0 0x80000
-	flash protect 0 0 7 off
-}
-
-#flash bank str9x <base> <size> 0 0 <target#> <variant>
-flash bank str9x 0x00000000 0x00080000 0 0 0
-flash bank str9x 0x00080000 0x00008000 0 0 0
-
-# For more information about the configuration files, take a look at:
-# openocd.texi