diff options
Diffstat (limited to 'src/target/target/is5114.cfg')
| -rw-r--r-- | src/target/target/is5114.cfg | 49 |
1 files changed, 0 insertions, 49 deletions
diff --git a/src/target/target/is5114.cfg b/src/target/target/is5114.cfg deleted file mode 100644 index c28298c6..00000000 --- a/src/target/target/is5114.cfg +++ /dev/null @@ -1,49 +0,0 @@ -# script for Insilica IS-5114 -# AKA: Atmel AT76C114 - an ARM946 chip -# ATMEL sold his product line to Insilica... - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME is5114 -} - -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - # this defaults to a little endian - set _ENDIAN little -} - -if { [info exists CPUTAPID ] } { - set _CPUTAPID $CPUTAPID -} else { - # force an error till we get a good number - set _CPUTAPID 0xffffffff -} - -# jtag speed. We need to stick to 16kHz until we've finished reset. -jtag_rclk 16 - -reset_config trst_and_srst - -# Do not specify a tap id here... -#OLD SYNTAX: jtag_device 8 0x1 0x1 0xfe -jtag newtap $_CHIPNAME unknown1 -irlen 8 -ircapture 0x01 -irmask 1 -#OLD SYNTAX: jtag_device 4 0x1 0xf 0xe -# This is the "arm946" chip. -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x0e -irmask 0xf -#OLD SYNTAX: jtag_device 5 0x1 0x1 0x1e -jtag newtap $_CHIPNAME unknown2 -irlen 5 -ircapture 1 -irmask 1 - - -#arm946e-s and -set _TARGETNAME [format "%s.cpu" $_CHIPNAME] -target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e - -$_TARGETNAME configure -event reset-start { jtag_rclk 16 } -$_TARGETNAME configure -event reset-init { - # We can increase speed now that we know the target is halted. - jtag_rclk 3000 -} -$_TARGETNAME configure -work-area-phys 0x50000000 -work-area-virt 0x50000000 -work-area-size 16384 -work-area-backup 1 |