diff options
Diffstat (limited to 'src/target/target/lpc2148.cfg')
| -rw-r--r-- | src/target/target/lpc2148.cfg | 56 |
1 files changed, 0 insertions, 56 deletions
diff --git a/src/target/target/lpc2148.cfg b/src/target/target/lpc2148.cfg deleted file mode 100644 index d367a8f5..00000000 --- a/src/target/target/lpc2148.cfg +++ /dev/null @@ -1,56 +0,0 @@ -# Use RCLK. If RCLK is not available fall back to 500kHz. -# -# Depending on cabling you might be able to eek this up to 2000kHz. -jtag_rclk 500 - -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME lpc2148 -} - -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} - -if { [info exists CPUTAPID ] } { - set _CPUTAPID $CPUTAPID -} else { - set _CPUTAPID 0x4f1f0f0f -} - -jtag_nsrst_delay 200 -jtag_ntrst_delay 200 - -# NOTE!!! LPCs need reset pulled while RTCK is low. 0 to activate -# JTAG, power-on reset is not enough, i.e. you need to perform a -# reset before being able to talk to the LPC2148, attach is not possible. - -reset_config trst_and_srst srst_pulls_trst - -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID - -set _TARGETNAME [format "%s.cpu" $_CHIPNAME] - -target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4 - -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 - -$_TARGETNAME configure -event reset-init { - # Force target into ARM state. - soft_reset_halt - - # Do not remap 0x0000-0x0020 to anything but the flash (i.e. select - # "User Flash Mode" where interrupt vectors are _not_ remapped, - # and reside in flash instead). - # - # See section 7.1 on page 32 ("Memory Mapping control register") in - # "UM10139: Volume 1: LPC214x User Manual", Rev. 02 -- 25 July 2006. - # http://www.standardics.nxp.com/support/documents/microcontrollers/pdf/user.manual.lpc2141.lpc2142.lpc2144.lpc2146.lpc2148.pdf - mwb 0xE01FC040 0x01 -} - -# flash bank lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc_checksum] -flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 calc_checksum |