Move TCL script files -- Step 2 of 2:

- Move src/tcl to tcl/.
- Update top Makefile.am to use new path name.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1919 b42882b7-edfa-0310-969c-e2dbd0fdcd60

1 files changed, 0 insertions, 61 deletions

diff --git a/src/tcl/target/aduc702x.cfg b/src/tcl/target/aduc702x.cfg
deleted file mode 100644
index ef1beb78..00000000
--- a/src/tcl/target/aduc702x.cfg
+++ /dev/null
@@ -1,61 +0,0 @@
-## -*- tcl -*-
-##
-
-
-if { [info exists CHIPNAME] } {	
-   set  _CHIPNAME $CHIPNAME    
-} else {	 
-   set  _CHIPNAME s3c2410
-}
-
-if { [info exists ENDIAN] } {	
-   set  _ENDIAN $ENDIAN    
-} else {	 
-  # This config file was defaulting to big endian..
-   set  _ENDIAN little
-}
-
-if { [info exists CPUTAPID] } {	
-   set  _CPUTAPID $CPUTAPID    
-} else {	 
-   set  _CPUTAPID 0xffffffff
-}
-
-
-jtag_nsrst_delay 200
-jtag_ntrst_delay 200
-
-# This is for the case that TRST/SRST is not wired on your JTAG adaptor.
-# Don't really need them anyways.  
-reset_config none
-
-## JTAG scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-##
-## Target configuration
-##
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
-
-# allocate the entire SRAM as working area
-$_TARGETNAME configure -work-area-phys 0x10000 -work-area-size 0x2000
-
-## flash configuration
-# only target number is needed
-flash bank aduc702x 0 0 0 0 0
-
-## If you use the watchdog, the following code makes sure that the board
-## doesn't reboot when halted via JTAG.  Yes, on the older generation
-## AdUC702x, timer3 continues running even when the CPU is halted.
-
-proc watchdog_service {} {
-    global watchdog_hdl
-    mww 0xffff036c 0
-#    puts "watchdog!!"
-    set watchdog_hdl [after 500 watchdog_service]
-}
-
-$_TARGETNAME configure -event reset-halt-post {  watchdog_service }
-$_TARGETNAME configure -event old-pre_resume { global watchdog_hdl; after cancel $watchdog_hdl }