diff options
| author | zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-06-15 23:54:09 +0000 |
|---|---|---|
| committer | zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-06-15 23:54:09 +0000 |
| commit | 1ac220df71f5e5e016bd3f376c67eb5f3d712612 (patch) | |
| tree | 774ebc12cbcdf671815edd2f3c9d3fad38f80800 /tcl/board | |
| parent | 588a17da43e95d385b4db27327fffb050bcdc0fc (diff) | |
| download | openocd_libswd-1ac220df71f5e5e016bd3f376c67eb5f3d712612.tar.gz openocd_libswd-1ac220df71f5e5e016bd3f376c67eb5f3d712612.tar.bz2 openocd_libswd-1ac220df71f5e5e016bd3f376c67eb5f3d712612.tar.xz openocd_libswd-1ac220df71f5e5e016bd3f376c67eb5f3d712612.zip | |
David Brownell <david-b@pacbell.net>:
Add another board ... OMAP2420 "H4" board. This won't be very widely
used with OpenOCD, but with mainline support in both U-Boot and Linux
it at least makes for a more complete set (and another testcase).
This is incomplete support in several respects. The ARM11 support is
not very deep yet; most registers aren't available, and the ETM can't
be hooked up. Plus, there's no script for OMAP-specific stuff like
setting up the SDRAM controller. Eventually the same NAND controller
driver should work with OMAP2 and OMAP3.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2242 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Diffstat (limited to 'tcl/board')
| -rw-r--r-- | tcl/board/omap2420_h4.cfg | 14 |
1 files changed, 14 insertions, 0 deletions
diff --git a/tcl/board/omap2420_h4.cfg b/tcl/board/omap2420_h4.cfg new file mode 100644 index 00000000..4a5daaf6 --- /dev/null +++ b/tcl/board/omap2420_h4.cfg @@ -0,0 +1,14 @@ +# OMAP2420 SDP board ("H4") + +source [find target/omap2420.cfg] + +# NOTE: this assumes you're *NOT* using a TI-14 connector. +reset_config trst_and_srst separate + +# Board configs can vary a *LOT* ... parts, jumpers, etc. +# This GP board boots from cs0 using NOR (2x32M), and also +# has 64M NAND on cs6. +flash bank cfi 0x04000000 0x02000000 2 2 $_TARGETNAME +flash bank cfi 0x06000000 0x02000000 2 2 $_TARGETNAME + +# vim:syntax tcl |