rename jtag_nsrst_delay as adapter_nsrst_delay

Globally rename "jtag_nsrst_delay" as "adapter_nsrst_delay", and move it
out of the "jtag" command group ...  it needs to be used with non-JTAG
transports

Includes a migration aid (in jtag/startup.tcl) so that old user scripts
won't break.  That aid should Sunset in about a year.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

15 files changed, 16 insertions, 16 deletions

diff --git a/tcl/board/at91sam9g20-ek.cfg b/tcl/board/at91sam9g20-ek.cfg
index f24f1a13..c3eb952c 100644
--- a/tcl/board/at91sam9g20-ek.cfg
+++ b/tcl/board/at91sam9g20-ek.cfg
@@ -32,7 +32,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
 # affected by the board and type of JTAG adapter.  A value of 200 ms seems
 # to work reliably for the configuration listed in the file header above.
 
-jtag_nsrst_delay 200
+adapter_nsrst_delay 200
 jtag_ntrst_delay 200
 
 # Set fallback clock to 1/6 of worst-case clock speed (which would be the 32.768 kHz slow clock).
diff --git a/tcl/board/crossbow_tech_imote2.cfg b/tcl/board/crossbow_tech_imote2.cfg
index 88d4aa72..002b5372 100644
--- a/tcl/board/crossbow_tech_imote2.cfg
+++ b/tcl/board/crossbow_tech_imote2.cfg
@@ -4,7 +4,7 @@ set  CHIPNAME imote2
 source [find target/pxa270.cfg]
 
 # longer-than-normal reset delay
-jtag_nsrst_delay 800
+adapter_nsrst_delay 800
 
 reset_config trst_and_srst separate
 
diff --git a/tcl/board/csb732.cfg b/tcl/board/csb732.cfg
index cad38e2e..4d6f0e48 100644
--- a/tcl/board/csb732.cfg
+++ b/tcl/board/csb732.cfg
@@ -3,7 +3,7 @@ source [find target/imx35.cfg]
 
 # Determined by trial and error
 reset_config trst_and_srst combined
-jtag_nsrst_delay 200
+adapter_nsrst_delay 200
 jtag_ntrst_delay 200
 
 $_TARGETNAME configure -event gdb-attach { reset init }
diff --git a/tcl/board/digi_connectcore_wi-9c.cfg b/tcl/board/digi_connectcore_wi-9c.cfg
index 2d823766..ad40d537 100644
--- a/tcl/board/digi_connectcore_wi-9c.cfg
+++ b/tcl/board/digi_connectcore_wi-9c.cfg
@@ -36,7 +36,7 @@ if { [info exists CPUTAPID ] } {
 set _TARGETNAME $_CHIPNAME.cpu
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
-jtag_nsrst_delay 200
+adapter_nsrst_delay 200
 jtag_ntrst_delay 0
 
 
diff --git a/tcl/board/ek-lm3s1968.cfg b/tcl/board/ek-lm3s1968.cfg
index 6ce7f7fa..28066f3f 100644
--- a/tcl/board/ek-lm3s1968.cfg
+++ b/tcl/board/ek-lm3s1968.cfg
@@ -16,7 +16,7 @@ source [find target/lm3s1968.cfg]
 # jtag speed
 adapter_khz 3000
 
-jtag_nsrst_delay 100
+adapter_nsrst_delay 100
 
 #LM3S1968 Evaluation Board has only srst
 reset_config srst_only
diff --git a/tcl/board/ek-lm3s811.cfg b/tcl/board/ek-lm3s811.cfg
index 078cae1f..7d3f2ce3 100644
--- a/tcl/board/ek-lm3s811.cfg
+++ b/tcl/board/ek-lm3s811.cfg
@@ -12,7 +12,7 @@ source [find target/lm3s811.cfg]
 # jtag speed
 adapter_khz 500
 
-jtag_nsrst_delay 100
+adapter_nsrst_delay 100
 
 #LM3S811 Evaluation Board has only srst
 reset_config srst_only
diff --git a/tcl/board/ek-lm3s9b9x.cfg b/tcl/board/ek-lm3s9b9x.cfg
index b8be88b8..fb6272af 100644
--- a/tcl/board/ek-lm3s9b9x.cfg
+++ b/tcl/board/ek-lm3s9b9x.cfg
@@ -11,7 +11,7 @@ source [find target/lm3s9b9x.cfg]
 # jtag speed
 adapter_khz 500
 
-jtag_nsrst_delay 100
+adapter_nsrst_delay 100
 
 #LM3S9B9x Evaluation Board has only srst
 reset_config srst_only
diff --git a/tcl/board/ethernut3.cfg b/tcl/board/ethernut3.cfg
index 359cb0bf..34e9b72d 100644
--- a/tcl/board/ethernut3.cfg
+++ b/tcl/board/ethernut3.cfg
@@ -20,7 +20,7 @@ flash bank $_FLASHNAME cfi 0x10000000 0x400000 2 2 $_TARGETNAME
 # Micrel MIC2775-29YM5 Supervisor
 # Reset output will remain active for 280ms (maximum)
 #
-jtag_nsrst_delay 300
+adapter_nsrst_delay 300
 jtag_ntrst_delay 300
 
 
diff --git a/tcl/board/hitex_lpc2929.cfg b/tcl/board/hitex_lpc2929.cfg
index 35cc7d0b..d9ca1109 100644
--- a/tcl/board/hitex_lpc2929.cfg
+++ b/tcl/board/hitex_lpc2929.cfg
@@ -2,7 +2,7 @@
 # http://www.hitex.com/
 
 # Delays on reset lines
-jtag_nsrst_delay 50
+adapter_nsrst_delay 50
 jtag_ntrst_delay 1
 
 # Maximum of 1/8 of clock frequency (XTAL = 16 MHz).
diff --git a/tcl/board/hitex_str9-comstick.cfg b/tcl/board/hitex_str9-comstick.cfg
index ade24f62..4d1bb2e4 100644
--- a/tcl/board/hitex_str9-comstick.cfg
+++ b/tcl/board/hitex_str9-comstick.cfg
@@ -7,7 +7,7 @@ source [find interface/hitex_str9-comstick.cfg]
 # set jtag speed
 adapter_khz 3000
 
-jtag_nsrst_delay 100
+adapter_nsrst_delay 100
 jtag_ntrst_delay 100
 #use combined on interfaces or targets that can't set TRST/SRST separately
 reset_config trst_and_srst
diff --git a/tcl/board/lubbock.cfg b/tcl/board/lubbock.cfg
index 32af386e..095c60aa 100644
--- a/tcl/board/lubbock.cfg
+++ b/tcl/board/lubbock.cfg
@@ -4,7 +4,7 @@
 
 source [find target/pxa255.cfg]
 
-jtag_nsrst_delay 250
+adapter_nsrst_delay 250
 jtag_ntrst_delay 250
 
 # NOTE: until after pinmux and such are set up, only CS0 is
diff --git a/tcl/board/mini2440.cfg b/tcl/board/mini2440.cfg
index b053c225..16889654 100644
--- a/tcl/board/mini2440.cfg
+++ b/tcl/board/mini2440.cfg
@@ -112,7 +112,7 @@ target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME
 $_TARGETNAME configure -work-area-phys 0x40000000  -work-area-size 0x4000 -work-area-backup 1
 
 #reset configuration
-jtag_nsrst_delay 100
+adapter_nsrst_delay 100
 jtag_ntrst_delay 100
 reset_config trst_and_srst
 
@@ -141,7 +141,7 @@ reset_config trst_and_srst
 
     nand device s3c2440 0
 
-    jtag_nsrst_delay 100
+    adapter_nsrst_delay 100
     jtag_ntrst_delay 100
     reset_config trst_and_srst
     init
diff --git a/tcl/board/phytec_lpc3250.cfg b/tcl/board/phytec_lpc3250.cfg
index 51622ef1..6a7e8e92 100644
--- a/tcl/board/phytec_lpc3250.cfg
+++ b/tcl/board/phytec_lpc3250.cfg
@@ -1,6 +1,6 @@
 source [find target/lpc3250.cfg]
 
-jtag_nsrst_delay 200
+adapter_nsrst_delay 200
 jtag_ntrst_delay 1
 adapter_khz 200
 reset_config trst_and_srst separate
diff --git a/tcl/board/pxa255_sst.cfg b/tcl/board/pxa255_sst.cfg
index ce903871..44f34ca1 100644
--- a/tcl/board/pxa255_sst.cfg
+++ b/tcl/board/pxa255_sst.cfg
@@ -93,7 +93,7 @@ $_TARGETNAME configure -event reset-init {pxa255_sst_init}
 
 reset_config trst_and_srst
 
-jtag_nsrst_delay 200
+adapter_nsrst_delay 200
 jtag_ntrst_delay 200
 
 #xscale debug_handler 0  0xFFFF0800      # debug handler base address
diff --git a/tcl/board/telo.cfg b/tcl/board/telo.cfg
index cb4bc2a3..80040b14 100644
--- a/tcl/board/telo.cfg
+++ b/tcl/board/telo.cfg
@@ -16,7 +16,7 @@ source [find target/c100helper.tcl]
 jtag_nsrst_assert_width 100
 jtag_ntrst_assert_width 100
 # don't talk to JTAG after reset for: [ms]
-jtag_nsrst_delay 100
+adapter_nsrst_delay 100
 jtag_ntrst_delay 100
 reset_config trst_and_srst separate