summaryrefslogtreecommitdiff
path: root/tcl/board
diff options
context:
space:
mode:
Diffstat (limited to 'tcl/board')
-rw-r--r--tcl/board/at91sam9g20-ek.cfg2
-rw-r--r--tcl/board/crossbow_tech_imote2.cfg2
-rw-r--r--tcl/board/csb732.cfg2
-rw-r--r--tcl/board/digi_connectcore_wi-9c.cfg2
-rw-r--r--tcl/board/ek-lm3s1968.cfg2
-rw-r--r--tcl/board/ek-lm3s811.cfg2
-rw-r--r--tcl/board/ek-lm3s9b9x.cfg2
-rw-r--r--tcl/board/ethernut3.cfg2
-rw-r--r--tcl/board/hitex_lpc2929.cfg2
-rw-r--r--tcl/board/hitex_str9-comstick.cfg2
-rw-r--r--tcl/board/lubbock.cfg2
-rw-r--r--tcl/board/mini2440.cfg4
-rw-r--r--tcl/board/phytec_lpc3250.cfg2
-rw-r--r--tcl/board/pxa255_sst.cfg2
-rw-r--r--tcl/board/telo.cfg2
15 files changed, 16 insertions, 16 deletions
diff --git a/tcl/board/at91sam9g20-ek.cfg b/tcl/board/at91sam9g20-ek.cfg
index f24f1a13..c3eb952c 100644
--- a/tcl/board/at91sam9g20-ek.cfg
+++ b/tcl/board/at91sam9g20-ek.cfg
@@ -32,7 +32,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
# affected by the board and type of JTAG adapter. A value of 200 ms seems
# to work reliably for the configuration listed in the file header above.
-jtag_nsrst_delay 200
+adapter_nsrst_delay 200
jtag_ntrst_delay 200
# Set fallback clock to 1/6 of worst-case clock speed (which would be the 32.768 kHz slow clock).
diff --git a/tcl/board/crossbow_tech_imote2.cfg b/tcl/board/crossbow_tech_imote2.cfg
index 88d4aa72..002b5372 100644
--- a/tcl/board/crossbow_tech_imote2.cfg
+++ b/tcl/board/crossbow_tech_imote2.cfg
@@ -4,7 +4,7 @@ set CHIPNAME imote2
source [find target/pxa270.cfg]
# longer-than-normal reset delay
-jtag_nsrst_delay 800
+adapter_nsrst_delay 800
reset_config trst_and_srst separate
diff --git a/tcl/board/csb732.cfg b/tcl/board/csb732.cfg
index cad38e2e..4d6f0e48 100644
--- a/tcl/board/csb732.cfg
+++ b/tcl/board/csb732.cfg
@@ -3,7 +3,7 @@ source [find target/imx35.cfg]
# Determined by trial and error
reset_config trst_and_srst combined
-jtag_nsrst_delay 200
+adapter_nsrst_delay 200
jtag_ntrst_delay 200
$_TARGETNAME configure -event gdb-attach { reset init }
diff --git a/tcl/board/digi_connectcore_wi-9c.cfg b/tcl/board/digi_connectcore_wi-9c.cfg
index 2d823766..ad40d537 100644
--- a/tcl/board/digi_connectcore_wi-9c.cfg
+++ b/tcl/board/digi_connectcore_wi-9c.cfg
@@ -36,7 +36,7 @@ if { [info exists CPUTAPID ] } {
set _TARGETNAME $_CHIPNAME.cpu
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-jtag_nsrst_delay 200
+adapter_nsrst_delay 200
jtag_ntrst_delay 0
diff --git a/tcl/board/ek-lm3s1968.cfg b/tcl/board/ek-lm3s1968.cfg
index 6ce7f7fa..28066f3f 100644
--- a/tcl/board/ek-lm3s1968.cfg
+++ b/tcl/board/ek-lm3s1968.cfg
@@ -16,7 +16,7 @@ source [find target/lm3s1968.cfg]
# jtag speed
adapter_khz 3000
-jtag_nsrst_delay 100
+adapter_nsrst_delay 100
#LM3S1968 Evaluation Board has only srst
reset_config srst_only
diff --git a/tcl/board/ek-lm3s811.cfg b/tcl/board/ek-lm3s811.cfg
index 078cae1f..7d3f2ce3 100644
--- a/tcl/board/ek-lm3s811.cfg
+++ b/tcl/board/ek-lm3s811.cfg
@@ -12,7 +12,7 @@ source [find target/lm3s811.cfg]
# jtag speed
adapter_khz 500
-jtag_nsrst_delay 100
+adapter_nsrst_delay 100
#LM3S811 Evaluation Board has only srst
reset_config srst_only
diff --git a/tcl/board/ek-lm3s9b9x.cfg b/tcl/board/ek-lm3s9b9x.cfg
index b8be88b8..fb6272af 100644
--- a/tcl/board/ek-lm3s9b9x.cfg
+++ b/tcl/board/ek-lm3s9b9x.cfg
@@ -11,7 +11,7 @@ source [find target/lm3s9b9x.cfg]
# jtag speed
adapter_khz 500
-jtag_nsrst_delay 100
+adapter_nsrst_delay 100
#LM3S9B9x Evaluation Board has only srst
reset_config srst_only
diff --git a/tcl/board/ethernut3.cfg b/tcl/board/ethernut3.cfg
index 359cb0bf..34e9b72d 100644
--- a/tcl/board/ethernut3.cfg
+++ b/tcl/board/ethernut3.cfg
@@ -20,7 +20,7 @@ flash bank $_FLASHNAME cfi 0x10000000 0x400000 2 2 $_TARGETNAME
# Micrel MIC2775-29YM5 Supervisor
# Reset output will remain active for 280ms (maximum)
#
-jtag_nsrst_delay 300
+adapter_nsrst_delay 300
jtag_ntrst_delay 300
diff --git a/tcl/board/hitex_lpc2929.cfg b/tcl/board/hitex_lpc2929.cfg
index 35cc7d0b..d9ca1109 100644
--- a/tcl/board/hitex_lpc2929.cfg
+++ b/tcl/board/hitex_lpc2929.cfg
@@ -2,7 +2,7 @@
# http://www.hitex.com/
# Delays on reset lines
-jtag_nsrst_delay 50
+adapter_nsrst_delay 50
jtag_ntrst_delay 1
# Maximum of 1/8 of clock frequency (XTAL = 16 MHz).
diff --git a/tcl/board/hitex_str9-comstick.cfg b/tcl/board/hitex_str9-comstick.cfg
index ade24f62..4d1bb2e4 100644
--- a/tcl/board/hitex_str9-comstick.cfg
+++ b/tcl/board/hitex_str9-comstick.cfg
@@ -7,7 +7,7 @@ source [find interface/hitex_str9-comstick.cfg]
# set jtag speed
adapter_khz 3000
-jtag_nsrst_delay 100
+adapter_nsrst_delay 100
jtag_ntrst_delay 100
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst
diff --git a/tcl/board/lubbock.cfg b/tcl/board/lubbock.cfg
index 32af386e..095c60aa 100644
--- a/tcl/board/lubbock.cfg
+++ b/tcl/board/lubbock.cfg
@@ -4,7 +4,7 @@
source [find target/pxa255.cfg]
-jtag_nsrst_delay 250
+adapter_nsrst_delay 250
jtag_ntrst_delay 250
# NOTE: until after pinmux and such are set up, only CS0 is
diff --git a/tcl/board/mini2440.cfg b/tcl/board/mini2440.cfg
index b053c225..16889654 100644
--- a/tcl/board/mini2440.cfg
+++ b/tcl/board/mini2440.cfg
@@ -112,7 +112,7 @@ target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 1
#reset configuration
-jtag_nsrst_delay 100
+adapter_nsrst_delay 100
jtag_ntrst_delay 100
reset_config trst_and_srst
@@ -141,7 +141,7 @@ reset_config trst_and_srst
nand device s3c2440 0
- jtag_nsrst_delay 100
+ adapter_nsrst_delay 100
jtag_ntrst_delay 100
reset_config trst_and_srst
init
diff --git a/tcl/board/phytec_lpc3250.cfg b/tcl/board/phytec_lpc3250.cfg
index 51622ef1..6a7e8e92 100644
--- a/tcl/board/phytec_lpc3250.cfg
+++ b/tcl/board/phytec_lpc3250.cfg
@@ -1,6 +1,6 @@
source [find target/lpc3250.cfg]
-jtag_nsrst_delay 200
+adapter_nsrst_delay 200
jtag_ntrst_delay 1
adapter_khz 200
reset_config trst_and_srst separate
diff --git a/tcl/board/pxa255_sst.cfg b/tcl/board/pxa255_sst.cfg
index ce903871..44f34ca1 100644
--- a/tcl/board/pxa255_sst.cfg
+++ b/tcl/board/pxa255_sst.cfg
@@ -93,7 +93,7 @@ $_TARGETNAME configure -event reset-init {pxa255_sst_init}
reset_config trst_and_srst
-jtag_nsrst_delay 200
+adapter_nsrst_delay 200
jtag_ntrst_delay 200
#xscale debug_handler 0 0xFFFF0800 # debug handler base address
diff --git a/tcl/board/telo.cfg b/tcl/board/telo.cfg
index cb4bc2a3..80040b14 100644
--- a/tcl/board/telo.cfg
+++ b/tcl/board/telo.cfg
@@ -16,7 +16,7 @@ source [find target/c100helper.tcl]
jtag_nsrst_assert_width 100
jtag_ntrst_assert_width 100
# don't talk to JTAG after reset for: [ms]
-jtag_nsrst_delay 100
+adapter_nsrst_delay 100
jtag_ntrst_delay 100
reset_config trst_and_srst separate