o Moving tinyprintf and stm libraries under thirdparty.

28 files changed, 0 insertions, 7476 deletions

diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/3ADCs_DMA/main.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/3ADCs_DMA/main.c
deleted file mode 100644
index fe7d71e..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/3ADCs_DMA/main.c
+++ /dev/null
@@ -1,280 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    ADC/3ADCs_DMA/main.c 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Main program body
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x.h"
-
-/** @addtogroup STM32F10x_StdPeriph_Examples
-  * @{
-  */
-
-/** @addtogroup ADC_3ADCs_DMA
-  * @{
-  */ 
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-#define ADC1_DR_Address    ((uint32_t)0x4001244C)
-#define ADC3_DR_Address    ((uint32_t)0x40013C4C)
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-ADC_InitTypeDef ADC_InitStructure;
-DMA_InitTypeDef DMA_InitStructure;
-__IO uint16_t ADC1ConvertedValue = 0, ADC3ConvertedValue = 0;
-
-/* Private function prototypes -----------------------------------------------*/
-void RCC_Configuration(void);
-void GPIO_Configuration(void);
-void NVIC_Configuration(void);
-
-/* Private functions ---------------------------------------------------------*/
-
-/**
-  * @brief   Main program
-  * @param  None
-  * @retval None
-  */
-int main(void)
-{
-  /*!< At this stage the microcontroller clock setting is already configured, 
-       this is done through SystemInit() function which is called from startup
-       file (startup_stm32f10x_xx.s) before to branch to application main.
-       To reconfigure the default setting of SystemInit() function, refer to
-       system_stm32f10x.c file
-     */     
-       
-  /* System clocks configuration ---------------------------------------------*/
-  RCC_Configuration();
-
-  /* NVIC configuration ------------------------------------------------------*/
-  NVIC_Configuration();
-
-  /* GPIO configuration ------------------------------------------------------*/
-  GPIO_Configuration();
-
-  /* DMA1 channel1 configuration ----------------------------------------------*/
-  DMA_DeInit(DMA1_Channel1);
-  DMA_InitStructure.DMA_PeripheralBaseAddr = ADC1_DR_Address;
-  DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)&ADC1ConvertedValue;
-  DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC;
-  DMA_InitStructure.DMA_BufferSize = 1;
-  DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
-  DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Disable;
-  DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
-  DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
-  DMA_InitStructure.DMA_Mode = DMA_Mode_Circular;
-  DMA_InitStructure.DMA_Priority = DMA_Priority_High;
-  DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
-  DMA_Init(DMA1_Channel1, &DMA_InitStructure);  
-  /* Enable DMA1 channel1 */
-  DMA_Cmd(DMA1_Channel1, ENABLE);
-
-  /* DMA2 channel5 configuration ----------------------------------------------*/
-  DMA_DeInit(DMA2_Channel5);
-  DMA_InitStructure.DMA_PeripheralBaseAddr = ADC3_DR_Address;
-  DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)&ADC3ConvertedValue;
-  DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC;
-  DMA_InitStructure.DMA_BufferSize = 1;
-  DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
-  DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Disable;
-  DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
-  DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
-  DMA_InitStructure.DMA_Mode = DMA_Mode_Circular;
-  DMA_InitStructure.DMA_Priority = DMA_Priority_High;
-  DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
-  DMA_Init(DMA2_Channel5, &DMA_InitStructure);  
-  /* Enable DMA2 channel5 */
-  DMA_Cmd(DMA2_Channel5, ENABLE);
-
-  /* ADC1 configuration ------------------------------------------------------*/
-  ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;
-  ADC_InitStructure.ADC_ScanConvMode = DISABLE;
-  ADC_InitStructure.ADC_ContinuousConvMode = ENABLE;
-  ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;
-  ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
-  ADC_InitStructure.ADC_NbrOfChannel = 1;
-  ADC_Init(ADC1, &ADC_InitStructure);
-  /* ADC1 regular channels configuration */ 
-  ADC_RegularChannelConfig(ADC1, ADC_Channel_14, 1, ADC_SampleTime_28Cycles5);    
-  /* Enable ADC1 DMA */
-  ADC_DMACmd(ADC1, ENABLE);
-
-  /* ADC2 configuration ------------------------------------------------------*/
-  ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;
-  ADC_InitStructure.ADC_ScanConvMode = DISABLE;
-  ADC_InitStructure.ADC_ContinuousConvMode = ENABLE;
-  ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;
-  ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
-  ADC_InitStructure.ADC_NbrOfChannel = 1;
-  ADC_Init(ADC2, &ADC_InitStructure);
-  /* ADC2 regular channels configuration */ 
-  ADC_RegularChannelConfig(ADC2, ADC_Channel_13, 1, ADC_SampleTime_28Cycles5);
-  /* Enable ADC2 EOC interrupt */
-  ADC_ITConfig(ADC2, ADC_IT_EOC, ENABLE);
-
-  /* ADC3 configuration ------------------------------------------------------*/
-  ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;
-  ADC_InitStructure.ADC_ScanConvMode = DISABLE;
-  ADC_InitStructure.ADC_ContinuousConvMode = ENABLE;
-  ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;
-  ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
-  ADC_InitStructure.ADC_NbrOfChannel = 1;
-  ADC_Init(ADC3, &ADC_InitStructure);
-  /* ADC3 regular channel14 configuration */ 
-  ADC_RegularChannelConfig(ADC3, ADC_Channel_12, 1, ADC_SampleTime_28Cycles5);
-  /* Enable ADC3 DMA */
-  ADC_DMACmd(ADC3, ENABLE);
-
-  /* Enable ADC1 */
-  ADC_Cmd(ADC1, ENABLE);
-
-  /* Enable ADC1 reset calibration register */   
-  ADC_ResetCalibration(ADC1);
-  /* Check the end of ADC1 reset calibration register */
-  while(ADC_GetResetCalibrationStatus(ADC1));
-
-  /* Start ADC1 calibration */
-  ADC_StartCalibration(ADC1);
-  /* Check the end of ADC1 calibration */
-  while(ADC_GetCalibrationStatus(ADC1));
-
-  /* Enable ADC2 */
-  ADC_Cmd(ADC2, ENABLE);
-
-  /* Enable ADC2 reset calibration register */   
-  ADC_ResetCalibration(ADC2);
-  /* Check the end of ADC2 reset calibration register */
-  while(ADC_GetResetCalibrationStatus(ADC2));
-
-  /* Start ADC2 calibration */
-  ADC_StartCalibration(ADC2);
-  /* Check the end of ADC2 calibration */
-  while(ADC_GetCalibrationStatus(ADC2));
-
-  /* Enable ADC3 */
-  ADC_Cmd(ADC3, ENABLE);
-
-  /* Enable ADC3 reset calibration register */   
-  ADC_ResetCalibration(ADC3);
-  /* Check the end of ADC3 reset calibration register */
-  while(ADC_GetResetCalibrationStatus(ADC3));
-
-  /* Start ADC3 calibration */
-  ADC_StartCalibration(ADC3);
-  /* Check the end of ADC3 calibration */
-  while(ADC_GetCalibrationStatus(ADC3));
-
-  /* Start ADC1 Software Conversion */ 
-  ADC_SoftwareStartConvCmd(ADC1, ENABLE);
-  /* Start ADC2 Software Conversion */ 
-  ADC_SoftwareStartConvCmd(ADC2, ENABLE);
-  /* Start ADC3 Software Conversion */ 
-  ADC_SoftwareStartConvCmd(ADC3, ENABLE);
-
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  Configures the different system clocks.
-  * @param  None
-  * @retval None
-  */
-void RCC_Configuration(void)
-{
-  /* ADCCLK = PCLK2/4 */
-  RCC_ADCCLKConfig(RCC_PCLK2_Div4); 
-    
-  /* Enable peripheral clocks ------------------------------------------------*/
-  /* Enable DMA1 and DMA2 clocks */
-  RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1 | RCC_AHBPeriph_DMA2, ENABLE);
-
-  /* Enable ADC1, ADC2, ADC3 and GPIOC clocks */
-  RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1 | RCC_APB2Periph_ADC2 |
-                         RCC_APB2Periph_ADC3 | RCC_APB2Periph_GPIOC, ENABLE);
-}
-
-/**
-  * @brief  Configures the different GPIO ports.
-  * @param  None
-  * @retval None
-  */
-void GPIO_Configuration(void)
-{
-  GPIO_InitTypeDef GPIO_InitStructure;
-
-  /* Configure PC.02, PC.03 and PC.04 (ADC Channel12, ADC Channel13 and 
-     ADC Channel14) as analog inputs */
-  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2 | GPIO_Pin_3 | GPIO_Pin_4;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
-  GPIO_Init(GPIOC, &GPIO_InitStructure);
-}
-
-/**
-  * @brief  Configures Vector Table base location.
-  * @param  None
-  * @retval None
-  */
-void NVIC_Configuration(void)
-{
-  NVIC_InitTypeDef NVIC_InitStructure;
-
-  /* Configure and enable ADC interrupt */
-  NVIC_InitStructure.NVIC_IRQChannel = ADC1_2_IRQn;
-  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
-  NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
-  NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
-  NVIC_Init(&NVIC_InitStructure);
-}
-
-#ifdef  USE_FULL_ASSERT
-
-/**
-  * @brief  Reports the name of the source file and the source line number
-  *         where the assert_param error has occurred.
-  * @param  file: pointer to the source file name
-  * @param  line: assert_param error line source number
-  * @retval None
-  */
-void assert_failed(uint8_t* file, uint32_t line)
-{ 
-  /* User can add his own implementation to report the file name and line number,
-     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
-
-  /* Infinite loop */
-  while (1)
-  {
-  }
-}
-
-#endif
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/3ADCs_DMA/stm32f10x_conf.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/3ADCs_DMA/stm32f10x_conf.h
deleted file mode 100644
index 02db464..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/3ADCs_DMA/stm32f10x_conf.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    ADC/3ADCs_DMA/stm32f10x_conf.h 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Library configuration file.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_CONF_H
-#define __STM32F10x_CONF_H
-
-/* Includes ------------------------------------------------------------------*/
-/* Uncomment/Comment the line below to enable/disable peripheral header file inclusion */
-#include "stm32f10x_adc.h"
-#include "stm32f10x_bkp.h"
-#include "stm32f10x_can.h"
-#include "stm32f10x_cec.h"
-#include "stm32f10x_crc.h"
-#include "stm32f10x_dac.h"
-#include "stm32f10x_dbgmcu.h"
-#include "stm32f10x_dma.h"
-#include "stm32f10x_exti.h"
-#include "stm32f10x_flash.h"
-#include "stm32f10x_fsmc.h"
-#include "stm32f10x_gpio.h"
-#include "stm32f10x_i2c.h"
-#include "stm32f10x_iwdg.h"
-#include "stm32f10x_pwr.h"
-#include "stm32f10x_rcc.h"
-#include "stm32f10x_rtc.h"
-#include "stm32f10x_sdio.h"
-#include "stm32f10x_spi.h"
-#include "stm32f10x_tim.h"
-#include "stm32f10x_usart.h"
-#include "stm32f10x_wwdg.h"
-#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Uncomment the line below to expanse the "assert_param" macro in the 
-   Standard Peripheral Library drivers code */
-/* #define USE_FULL_ASSERT    1 */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function which reports 
-  *         the name of the source file and the source line number of the call 
-  *         that failed. If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0)
-#endif /* USE_FULL_ASSERT */
-
-#endif /* __STM32F10x_CONF_H */
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/3ADCs_DMA/stm32f10x_it.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/3ADCs_DMA/stm32f10x_it.c
deleted file mode 100644
index 3dd4e41..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/3ADCs_DMA/stm32f10x_it.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    ADC/3ADCs_DMA/stm32f10x_it.c 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Main Interrupt Service Routines.
-  *          This file provides template for all exceptions handler and peripherals
-  *          interrupt service routine.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_it.h"
-
-/** @addtogroup STM32F10x_StdPeriph_Examples
-  * @{
-  */
-
-/** @addtogroup ADC_3ADCs_DMA
-  * @{
-  */ 
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-__IO uint16_t ADC2ConvertedValue;
-
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/******************************************************************************/
-/*            Cortex-M3 Processor Exceptions Handlers                         */
-/******************************************************************************/
-
-/**
-  * @brief  This function handles NMI exception.
-  * @param  None
-  * @retval None
-  */
-void NMI_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Hard Fault exception.
-  * @param  None
-  * @retval None
-  */
-void HardFault_Handler(void)
-{
-  /* Go to infinite loop when Hard Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Memory Manage exception.
-  * @param  None
-  * @retval None
-  */
-void MemManage_Handler(void)
-{
-  /* Go to infinite loop when Memory Manage exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Bus Fault exception.
-  * @param  None
-  * @retval None
-  */
-void BusFault_Handler(void)
-{
-  /* Go to infinite loop when Bus Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Usage Fault exception.
-  * @param  None
-  * @retval None
-  */
-void UsageFault_Handler(void)
-{
-  /* Go to infinite loop when Usage Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles SVCall exception.
-  * @param  None
-  * @retval None
-  */
-void SVC_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Debug Monitor exception.
-  * @param  None
-  * @retval None
-  */
-void DebugMon_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles PendSV_Handler exception.
-  * @param  None
-  * @retval None
-  */
-void PendSV_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles SysTick Handler.
-  * @param  None
-  * @retval None
-  */
-void SysTick_Handler(void)
-{
-}
-
-/******************************************************************************/
-/*            STM32F10x Peripherals Interrupt Handlers                        */
-/******************************************************************************/
- 
-/**
-  * @brief  This function handles ADC1 and ADC2 global interrupts requests.
-  * @param  None
-  * @retval None
-  */
-void ADC1_2_IRQHandler(void)
-{
-  /* Get injected channel13 converted value */
-  ADC2ConvertedValue = ADC_GetConversionValue(ADC2);
-}
-
-/******************************************************************************/
-/*                 STM32F10x Peripherals Interrupt Handlers                   */
-/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
-/*  available peripheral interrupt handler's name please refer to the startup */
-/*  file (startup_stm32f10x_xx.s).                                            */
-/******************************************************************************/
-
-/**
-  * @brief  This function handles PPP interrupt request.
-  * @param  None
-  * @retval None
-  */
-/*void PPP_IRQHandler(void)
-{
-}*/
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/3ADCs_DMA/stm32f10x_it.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/3ADCs_DMA/stm32f10x_it.h
deleted file mode 100644
index fc8479d..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/3ADCs_DMA/stm32f10x_it.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    ADC/3ADCs_DMA/stm32f10x_it.h 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   This file contains the headers of the interrupt handlers.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_IT_H
-#define __STM32F10x_IT_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-void NMI_Handler(void);
-void HardFault_Handler(void);
-void MemManage_Handler(void);
-void BusFault_Handler(void);
-void UsageFault_Handler(void);
-void SVC_Handler(void);
-void DebugMon_Handler(void);
-void PendSV_Handler(void);
-void SysTick_Handler(void);
-void ADC1_2_IRQHandler(void);
-					 
-#endif /* __STM32F10x_IT_H */
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/3ADCs_DMA/system_stm32f10x.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/3ADCs_DMA/system_stm32f10x.c
deleted file mode 100644
index f41af14..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/3ADCs_DMA/system_stm32f10x.c
+++ /dev/null
@@ -1,1094 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    ADC/3ADCs_DMA/system_stm32f10x.c
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
-  * 
-  * 1.  This file provides two functions and one global variable to be called from 
-  *     user application:
-  *      - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
-  *                      factors, AHB/APBx prescalers and Flash settings). 
-  *                      This function is called at startup just after reset and 
-  *                      before branch to main program. This call is made inside
-  *                      the "startup_stm32f10x_xx.s" file.
-  *
-  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
-  *                                  by the user application to setup the SysTick 
-  *                                  timer or configure other parameters.
-  *                                     
-  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
-  *                                 be called whenever the core clock is changed
-  *                                 during program execution.
-  *
-  * 2. After each device reset the HSI (8 MHz) is used as system clock source.
-  *    Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to
-  *    configure the system clock before to branch to main program.
-  *
-  * 3. If the system clock source selected by user fails to startup, the SystemInit()
-  *    function will do nothing and HSI still used as system clock source. User can 
-  *    add some code to deal with this issue inside the SetSysClock() function.
-  *
-  * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on
-  *    the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file. 
-  *    When HSE is used as system clock source, directly or through PLL, and you
-  *    are using different crystal you have to adapt the HSE value to your own
-  *    configuration.
-  *        
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */
-
-/** @addtogroup CMSIS
-  * @{
-  */
-
-/** @addtogroup stm32f10x_system
-  * @{
-  */  
-  
-/** @addtogroup STM32F10x_System_Private_Includes
-  * @{
-  */
-
-#include "stm32f10x.h"
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_TypesDefinitions
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Defines
-  * @{
-  */
-
-/*!< Uncomment the line corresponding to the desired System clock (SYSCLK)
-   frequency (after reset the HSI is used as SYSCLK source)
-   
-   IMPORTANT NOTE:
-   ============== 
-   1. After each device reset the HSI is used as System clock source.
-
-   2. Please make sure that the selected System clock doesn't exceed your device's
-      maximum frequency.
-      
-   3. If none of the define below is enabled, the HSI is used as System clock
-    source.
-
-   4. The System clock configuration functions provided within this file assume that:
-        - For Low, Medium and High density Value line devices an external 8MHz 
-          crystal is used to drive the System clock.
-        - For Low, Medium and High density devices an external 8MHz crystal is
-          used to drive the System clock.
-        - For Connectivity line devices an external 25MHz crystal is used to drive
-          the System clock.
-     If you are using different crystal you have to adapt those functions accordingly.
-    */
-    
-#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-/* #define SYSCLK_FREQ_HSE    HSE_VALUE */
- #define SYSCLK_FREQ_24MHz  24000000
-#else
-/* #define SYSCLK_FREQ_HSE    HSE_VALUE */
-/* #define SYSCLK_FREQ_24MHz  24000000 */ 
-/* #define SYSCLK_FREQ_36MHz  36000000 */
-/* #define SYSCLK_FREQ_48MHz  48000000 */
- #define SYSCLK_FREQ_56MHz  56000000
-/* #define SYSCLK_FREQ_72MHz  72000000 */
-#endif
-
-/*!< Uncomment the following line if you need to use external SRAM mounted
-     on STM3210E-EVAL board (STM32 High density and XL-density devices) or on 
-     STM32100E-EVAL board (STM32 High-density value line devices) as data memory */ 
-#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
-/* #define DATA_IN_ExtSRAM */
-#endif
-
-/*!< Uncomment the following line if you need to relocate your vector Table in
-     Internal SRAM. */ 
-/* #define VECT_TAB_SRAM */
-#define VECT_TAB_OFFSET  0x0 /*!< Vector Table base offset field. 
-                                  This value must be a multiple of 0x200. */
-
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Macros
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Variables
-  * @{
-  */
-
-/*******************************************************************************
-*  Clock Definitions
-*******************************************************************************/
-#ifdef SYSCLK_FREQ_HSE
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_HSE;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_24MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_24MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_36MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_36MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_48MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_48MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_56MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_56MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_72MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_72MHz;        /*!< System Clock Frequency (Core Clock) */
-#else /*!< HSI Selected as System Clock source */
-  uint32_t SystemCoreClock         = HSI_VALUE;        /*!< System Clock Frequency (Core Clock) */
-#endif
-
-__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_FunctionPrototypes
-  * @{
-  */
-
-static void SetSysClock(void);
-
-#ifdef SYSCLK_FREQ_HSE
-  static void SetSysClockToHSE(void);
-#elif defined SYSCLK_FREQ_24MHz
-  static void SetSysClockTo24(void);
-#elif defined SYSCLK_FREQ_36MHz
-  static void SetSysClockTo36(void);
-#elif defined SYSCLK_FREQ_48MHz
-  static void SetSysClockTo48(void);
-#elif defined SYSCLK_FREQ_56MHz
-  static void SetSysClockTo56(void);  
-#elif defined SYSCLK_FREQ_72MHz
-  static void SetSysClockTo72(void);
-#endif
-
-#ifdef DATA_IN_ExtSRAM
-  static void SystemInit_ExtMemCtl(void); 
-#endif /* DATA_IN_ExtSRAM */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Functions
-  * @{
-  */
-
-/**
-  * @brief  Setup the microcontroller system
-  *         Initialize the Embedded Flash Interface, the PLL and update the 
-  *         SystemCoreClock variable.
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-void SystemInit (void)
-{
-  /* Reset the RCC clock configuration to the default reset state(for debug purpose) */
-  /* Set HSION bit */
-  RCC->CR |= (uint32_t)0x00000001;
-
-  /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
-#ifndef STM32F10X_CL
-  RCC->CFGR &= (uint32_t)0xF8FF0000;
-#else
-  RCC->CFGR &= (uint32_t)0xF0FF0000;
-#endif /* STM32F10X_CL */   
-  
-  /* Reset HSEON, CSSON and PLLON bits */
-  RCC->CR &= (uint32_t)0xFEF6FFFF;
-
-  /* Reset HSEBYP bit */
-  RCC->CR &= (uint32_t)0xFFFBFFFF;
-
-  /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
-  RCC->CFGR &= (uint32_t)0xFF80FFFF;
-
-#ifdef STM32F10X_CL
-  /* Reset PLL2ON and PLL3ON bits */
-  RCC->CR &= (uint32_t)0xEBFFFFFF;
-
-  /* Disable all interrupts and clear pending bits  */
-  RCC->CIR = 0x00FF0000;
-
-  /* Reset CFGR2 register */
-  RCC->CFGR2 = 0x00000000;
-#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-  /* Disable all interrupts and clear pending bits  */
-  RCC->CIR = 0x009F0000;
-
-  /* Reset CFGR2 register */
-  RCC->CFGR2 = 0x00000000;      
-#else
-  /* Disable all interrupts and clear pending bits  */
-  RCC->CIR = 0x009F0000;
-#endif /* STM32F10X_CL */
-    
-#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
-  #ifdef DATA_IN_ExtSRAM
-    SystemInit_ExtMemCtl(); 
-  #endif /* DATA_IN_ExtSRAM */
-#endif 
-
-  /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */
-  /* Configure the Flash Latency cycles and enable prefetch buffer */
-  SetSysClock();
-
-#ifdef VECT_TAB_SRAM
-  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
-#else
-  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
-#endif 
-}
-
-/**
-  * @brief  Update SystemCoreClock variable according to Clock Register Values.
-  *         The SystemCoreClock variable contains the core clock (HCLK), it can
-  *         be used by the user application to setup the SysTick timer or configure
-  *         other parameters.
-  *           
-  * @note   Each time the core clock (HCLK) changes, this function must be called
-  *         to update SystemCoreClock variable value. Otherwise, any configuration
-  *         based on this variable will be incorrect.         
-  *     
-  * @note   - The system frequency computed by this function is not the real 
-  *           frequency in the chip. It is calculated based on the predefined 
-  *           constant and the selected clock source:
-  *             
-  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
-  *                                              
-  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
-  *                          
-  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
-  *             or HSI_VALUE(*) multiplied by the PLL factors.
-  *         
-  *         (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
-  *             8 MHz) but the real value may vary depending on the variations
-  *             in voltage and temperature.   
-  *    
-  *         (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
-  *              8 MHz or 25 MHz, depedning on the product used), user has to ensure
-  *              that HSE_VALUE is same as the real frequency of the crystal used.
-  *              Otherwise, this function may have wrong result.
-  *                
-  *         - The result of this function could be not correct when using fractional
-  *           value for HSE crystal.
-  * @param  None
-  * @retval None
-  */
-void SystemCoreClockUpdate (void)
-{
-  uint32_t tmp = 0, pllmull = 0, pllsource = 0;
-
-#ifdef  STM32F10X_CL
-  uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0;
-#endif /* STM32F10X_CL */
-
-#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-  uint32_t prediv1factor = 0;
-#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */
-    
-  /* Get SYSCLK source -------------------------------------------------------*/
-  tmp = RCC->CFGR & RCC_CFGR_SWS;
-  
-  switch (tmp)
-  {
-    case 0x00:  /* HSI used as system clock */
-      SystemCoreClock = HSI_VALUE;
-      break;
-    case 0x04:  /* HSE used as system clock */
-      SystemCoreClock = HSE_VALUE;
-      break;
-    case 0x08:  /* PLL used as system clock */
-
-      /* Get PLL clock source and multiplication factor ----------------------*/
-      pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
-      pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
-      
-#ifndef STM32F10X_CL      
-      pllmull = ( pllmull >> 18) + 2;
-      
-      if (pllsource == 0x00)
-      {
-        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
-        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
-      }
-      else
-      {
- #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-       prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
-       /* HSE oscillator clock selected as PREDIV1 clock entry */
-       SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; 
- #else
-        /* HSE selected as PLL clock entry */
-        if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
-        {/* HSE oscillator clock divided by 2 */
-          SystemCoreClock = (HSE_VALUE >> 1) * pllmull;
-        }
-        else
-        {
-          SystemCoreClock = HSE_VALUE * pllmull;
-        }
- #endif
-      }
-#else
-      pllmull = pllmull >> 18;
-      
-      if (pllmull != 0x0D)
-      {
-         pllmull += 2;
-      }
-      else
-      { /* PLL multiplication factor = PLL input clock * 6.5 */
-        pllmull = 13 / 2; 
-      }
-            
-      if (pllsource == 0x00)
-      {
-        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
-        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
-      }
-      else
-      {/* PREDIV1 selected as PLL clock entry */
-        
-        /* Get PREDIV1 clock source and division factor */
-        prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
-        prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
-        
-        if (prediv1source == 0)
-        { 
-          /* HSE oscillator clock selected as PREDIV1 clock entry */
-          SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;          
-        }
-        else
-        {/* PLL2 clock selected as PREDIV1 clock entry */
-          
-          /* Get PREDIV2 division factor and PLL2 multiplication factor */
-          prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1;
-          pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; 
-          SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;                         
-        }
-      }
-#endif /* STM32F10X_CL */ 
-      break;
-
-    default:
-      SystemCoreClock = HSI_VALUE;
-      break;
-  }
-  
-  /* Compute HCLK clock frequency ----------------*/
-  /* Get HCLK prescaler */
-  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
-  /* HCLK clock frequency */
-  SystemCoreClock >>= tmp;  
-}
-
-/**
-  * @brief  Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClock(void)
-{
-#ifdef SYSCLK_FREQ_HSE
-  SetSysClockToHSE();
-#elif defined SYSCLK_FREQ_24MHz
-  SetSysClockTo24();
-#elif defined SYSCLK_FREQ_36MHz
-  SetSysClockTo36();
-#elif defined SYSCLK_FREQ_48MHz
-  SetSysClockTo48();
-#elif defined SYSCLK_FREQ_56MHz
-  SetSysClockTo56();  
-#elif defined SYSCLK_FREQ_72MHz
-  SetSysClockTo72();
-#endif
- 
- /* If none of the define above is enabled, the HSI is used as System clock
-    source (default after reset) */ 
-}
-
-/**
-  * @brief  Setup the external memory controller. Called in startup_stm32f10x.s 
-  *          before jump to __main
-  * @param  None
-  * @retval None
-  */ 
-#ifdef DATA_IN_ExtSRAM
-/**
-  * @brief  Setup the external memory controller. 
-  *         Called in startup_stm32f10x_xx.s/.c before jump to main.
-  * 	      This function configures the external SRAM mounted on STM3210E-EVAL
-  *         board (STM32 High density devices). This SRAM will be used as program
-  *         data memory (including heap and stack).
-  * @param  None
-  * @retval None
-  */ 
-void SystemInit_ExtMemCtl(void) 
-{
-/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is 
-  required, then adjust the Register Addresses */
-
-  /* Enable FSMC clock */
-  RCC->AHBENR = 0x00000114;
-  
-  /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */  
-  RCC->APB2ENR = 0x000001E0;
-  
-/* ---------------  SRAM Data lines, NOE and NWE configuration ---------------*/
-/*----------------  SRAM Address lines configuration -------------------------*/
-/*----------------  NOE and NWE configuration --------------------------------*/  
-/*----------------  NE3 configuration ----------------------------------------*/
-/*----------------  NBL0, NBL1 configuration ---------------------------------*/
-  
-  GPIOD->CRL = 0x44BB44BB;  
-  GPIOD->CRH = 0xBBBBBBBB;
-
-  GPIOE->CRL = 0xB44444BB;  
-  GPIOE->CRH = 0xBBBBBBBB;
-
-  GPIOF->CRL = 0x44BBBBBB;  
-  GPIOF->CRH = 0xBBBB4444;
-
-  GPIOG->CRL = 0x44BBBBBB;  
-  GPIOG->CRH = 0x44444B44;
-   
-/*----------------  FSMC Configuration ---------------------------------------*/  
-/*----------------  Enable FSMC Bank1_SRAM Bank ------------------------------*/
-  
-  FSMC_Bank1->BTCR[4] = 0x00001011;
-  FSMC_Bank1->BTCR[5] = 0x00000200;
-}
-#endif /* DATA_IN_ExtSRAM */
-
-#ifdef SYSCLK_FREQ_HSE
-/**
-  * @brief  Selects HSE as System clock source and configure HCLK, PCLK2
-  *          and PCLK1 prescalers.
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockToHSE(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-
-#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 0 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-
-#ifndef STM32F10X_CL
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
-#else
-    if (HSE_VALUE <= 24000000)
-	{
-      FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
-	}
-	else
-	{
-      FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
-	}
-#endif /* STM32F10X_CL */
-#endif
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
-    
-    /* Select HSE as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE;    
-
-    /* Wait till HSE is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  }  
-}
-#elif defined SYSCLK_FREQ_24MHz
-/**
-  * @brief  Sets System clock frequency to 24MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers.
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo24(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL 
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 0 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;    
-#endif
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
-    
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL6); 
-
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */       
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }   
-#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
-    /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6);
-#else    
-    /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-#elif defined SYSCLK_FREQ_36MHz
-/**
-  * @brief  Sets System clock frequency to 36MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo36(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 1 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
-    
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    
-    /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL9); 
-
-	/*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-#else    
-    /*  PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-#elif defined SYSCLK_FREQ_48MHz
-/**
-  * @brief  Sets System clock frequency to 48MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo48(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 1 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
-    
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-   
-    /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL6); 
-#else    
-    /*  PLL configuration: PLLCLK = HSE * 6 = 48 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-
-#elif defined SYSCLK_FREQ_56MHz
-/**
-  * @brief  Sets System clock frequency to 56MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo56(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/   
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 2 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
-
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-   
-    /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL7); 
-#else     
-    /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7);
-
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-
-#elif defined SYSCLK_FREQ_72MHz
-/**
-  * @brief  Sets System clock frequency to 72MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo72(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 2 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
-
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
-
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-   
-    /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL9); 
-#else    
-    /*  PLL configuration: PLLCLK = HSE * 9 = 72 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE |
-                                        RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-    
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  }
-}
-#endif
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-  
-/**
-  * @}
-  */    
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ADC1_DMA/main.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ADC1_DMA/main.c
deleted file mode 100644
index bc9bd02..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ADC1_DMA/main.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    ADC/ADC1_DMA/main.c 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Main program body
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x.h"
-
-/** @addtogroup STM32F10x_StdPeriph_Examples
-  * @{
-  */
-
-/** @addtogroup ADC_ADC1_DMA
-  * @{
-  */ 
-
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-#define ADC1_DR_Address    ((uint32_t)0x4001244C)
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-ADC_InitTypeDef ADC_InitStructure;
-DMA_InitTypeDef DMA_InitStructure;
-__IO uint16_t ADCConvertedValue;
-
-/* Private function prototypes -----------------------------------------------*/
-void RCC_Configuration(void);
-void GPIO_Configuration(void);
-
-/* Private functions ---------------------------------------------------------*/
-
-/**
-  * @brief   Main program
-  * @param  None
-  * @retval None
-  */
-int main(void)
-{
-  /*!< At this stage the microcontroller clock setting is already configured, 
-       this is done through SystemInit() function which is called from startup
-       file (startup_stm32f10x_xx.s) before to branch to application main.
-       To reconfigure the default setting of SystemInit() function, refer to
-       system_stm32f10x.c file
-     */     
-       
-  /* System clocks configuration ---------------------------------------------*/
-  RCC_Configuration();
-
-  /* GPIO configuration ------------------------------------------------------*/
-  GPIO_Configuration();
-
-  /* DMA1 channel1 configuration ----------------------------------------------*/
-  DMA_DeInit(DMA1_Channel1);
-  DMA_InitStructure.DMA_PeripheralBaseAddr = ADC1_DR_Address;
-  DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)&ADCConvertedValue;
-  DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC;
-  DMA_InitStructure.DMA_BufferSize = 1;
-  DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
-  DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Disable;
-  DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
-  DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
-  DMA_InitStructure.DMA_Mode = DMA_Mode_Circular;
-  DMA_InitStructure.DMA_Priority = DMA_Priority_High;
-  DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
-  DMA_Init(DMA1_Channel1, &DMA_InitStructure);
-  
-  /* Enable DMA1 channel1 */
-  DMA_Cmd(DMA1_Channel1, ENABLE);
-  
-  /* ADC1 configuration ------------------------------------------------------*/
-  ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;
-  ADC_InitStructure.ADC_ScanConvMode = ENABLE;
-  ADC_InitStructure.ADC_ContinuousConvMode = ENABLE;
-  ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;
-  ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
-  ADC_InitStructure.ADC_NbrOfChannel = 1;
-  ADC_Init(ADC1, &ADC_InitStructure);
-
-  /* ADC1 regular channel14 configuration */ 
-  ADC_RegularChannelConfig(ADC1, ADC_Channel_14, 1, ADC_SampleTime_55Cycles5);
-
-  /* Enable ADC1 DMA */
-  ADC_DMACmd(ADC1, ENABLE);
-  
-  /* Enable ADC1 */
-  ADC_Cmd(ADC1, ENABLE);
-
-  /* Enable ADC1 reset calibration register */   
-  ADC_ResetCalibration(ADC1);
-  /* Check the end of ADC1 reset calibration register */
-  while(ADC_GetResetCalibrationStatus(ADC1));
-
-  /* Start ADC1 calibration */
-  ADC_StartCalibration(ADC1);
-  /* Check the end of ADC1 calibration */
-  while(ADC_GetCalibrationStatus(ADC1));
-     
-  /* Start ADC1 Software Conversion */ 
-  ADC_SoftwareStartConvCmd(ADC1, ENABLE);
-
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  Configures the different system clocks.
-  * @param  None
-  * @retval None
-  */
-void RCC_Configuration(void)
-{
-#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
-  /* ADCCLK = PCLK2/2 */
-  RCC_ADCCLKConfig(RCC_PCLK2_Div2); 
-#else
-  /* ADCCLK = PCLK2/4 */
-  RCC_ADCCLKConfig(RCC_PCLK2_Div4); 
-#endif
-  /* Enable peripheral clocks ------------------------------------------------*/
-  /* Enable DMA1 clock */
-  RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1, ENABLE);
-
-  /* Enable ADC1 and GPIOC clock */
-  RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1 | RCC_APB2Periph_GPIOC, ENABLE);
-}
-
-/**
-  * @brief  Configures the different GPIO ports.
-  * @param  None
-  * @retval None
-  */
-void GPIO_Configuration(void)
-{
-  GPIO_InitTypeDef GPIO_InitStructure;
-
-  /* Configure PC.04 (ADC Channel14) as analog input -------------------------*/
-  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
-  GPIO_Init(GPIOC, &GPIO_InitStructure);
-}
-
-#ifdef  USE_FULL_ASSERT
-
-/**
-  * @brief  Reports the name of the source file and the source line number
-  *         where the assert_param error has occurred.
-  * @param  file: pointer to the source file name
-  * @param  line: assert_param error line source number
-  * @retval None
-  */
-void assert_failed(uint8_t* file, uint32_t line)
-{ 
-  /* User can add his own implementation to report the file name and line number,
-     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
-
-  /* Infinite loop */
-  while (1)
-  {
-  }
-}
-
-#endif
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ADC1_DMA/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ADC1_DMA/readme.txt
deleted file mode 100644
index 19d9a7d..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ADC1_DMA/readme.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-/**
-  @page ADC_ADC1_DMA ADC1 DMA example
-  
-  @verbatim
-  ******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
-  * @file    ADC/ADC1_DMA/readme.txt 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Description of the ADC1 DMA example.
-  ******************************************************************************
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  ******************************************************************************
-   @endverbatim
-
-@par Example Description 
-
-This example describes how to use the ADC1 and DMA to transfer continuously 
-converted data from ADC1 to memory.
-The ADC1 is configured to convert continuously channel14.
-Each time an end of conversion occurs the DMA transfers, in circular mode, the
-converted data from ADC1 DR register to the ADCConvertedValue variable.
-The ADC1 clock is set to 12 MHz on Value line devices and to 14MHz on other 
-devices.
-
-@par Directory contents 
-
-  - ADC/ADC1_DMA/stm32f10x_conf.h     Library Configuration file
-  - ADC/ADC1_DMA/stm32f10x_it.c       Interrupt handlers
-  - ADC/ADC1_DMA/stm32f10x_it.h       Interrupt handlers header file
-  - ADC/ADC1_DMA/system_stm32f10x.c   STM32F10x system source file
-  - ADC/ADC1_DMA/main.c               Main program
-
-@par Hardware and Software environment 
-
-  - This example runs on STM32F10x Connectivity line, High-Density, High-Density
-    Value line, Medium-Density, XL-Density, Medium-Density Value line, Low-Density 
-    and Low-Density Value line Devices.
-  
-  - This example has been tested with STMicroelectronics STM32100E-EVAL (High-Density
-    Value line), STM32100B-EVAL (Medium-Density Value line), STM3210C-EVAL 
-    (Connectivity line), STM3210E-EVAL (High-Density and XL-Density) and 
-    STM3210B-EVAL (Medium-Density) evaluation boards and can be easily tailored 
-    to any other supported device and development board.
-
-  - STM32100E-EVAL Set-up
-    - Connect a variable power supply 0-3.3V to ADC Channel14 mapped on pin PC.04
-      (potentiometer RV2)
-      
-  - STM32100B-EVAL Set-up
-    - Connect a variable power supply 0-3.3V to ADC Channel14 mapped on pin PC.04
-      (potentiometer RV1)
-
-  - STM3210C-EVAL Set-up 
-    - Connect a variable power supply 0-3.3V to ADC Channel14 mapped on pin PC.04
-      (potentiometer RV1)
-
-  - STM3210E-EVAL Set-up 
-    - Connect a variable power supply 0-3.3V to ADC Channel14 mapped on pin PC.04
-      (potentiometer RV1)
-
-  - STM3210B-EVAL Set-up 
-    - Connect a variable power supply 0-3.3V to ADC Channel14 mapped on pin PC.04
-      (potentiometer RV1)
-
-@par How to use it ? 
-
-In order to make the program work, you must do the following :
- - Copy all source files from this example folder to the template folder under
-   Project\STM32F10x_StdPeriph_Template
- - Open your preferred toolchain 
- - Rebuild all files and load your image into target memory
- - Run the example 
-
-@note
- - Low-density Value line devices are STM32F100xx microcontrollers where the 
-   Flash memory density ranges between 16 and 32 Kbytes.
- - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
-   microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
- - Medium-density Value line devices are STM32F100xx microcontrollers where
-   the Flash memory density ranges between 64 and 128 Kbytes.  
- - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
-   microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
- - High-density devices are STM32F101xx and STM32F103xx microcontrollers where
-   the Flash memory density ranges between 256 and 512 Kbytes.
- - High-density Value line devices are STM32F100xx microcontrollers where
-   the Flash memory density ranges between 256 and 512 Kbytes.   
- - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
-   the Flash memory density ranges between 512 and 1024 Kbytes.
- - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
-    
- * <h3><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h3>
- */
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ADC1_DMA/stm32f10x_it.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ADC1_DMA/stm32f10x_it.c
deleted file mode 100644
index 1c69e80..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ADC1_DMA/stm32f10x_it.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    ADC/ADC1_DMA/stm32f10x_it.c 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Main Interrupt Service Routines.
-  *          This file provides template for all exceptions handler and peripherals
-  *          interrupt service routine.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_it.h"
-
-/** @addtogroup STM32F10x_StdPeriph_Examples
-  * @{
-  */
-
-/** @addtogroup ADC_ADC1_DMA
-  * @{
-  */ 
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/******************************************************************************/
-/*            Cortex-M3 Processor Exceptions Handlers                         */
-/******************************************************************************/
-
-/**
-  * @brief  This function handles NMI exception.
-  * @param  None
-  * @retval None
-  */
-void NMI_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Hard Fault exception.
-  * @param  None
-  * @retval None
-  */
-void HardFault_Handler(void)
-{
-  /* Go to infinite loop when Hard Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Memory Manage exception.
-  * @param  None
-  * @retval None
-  */
-void MemManage_Handler(void)
-{
-  /* Go to infinite loop when Memory Manage exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Bus Fault exception.
-  * @param  None
-  * @retval None
-  */
-void BusFault_Handler(void)
-{
-  /* Go to infinite loop when Bus Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Usage Fault exception.
-  * @param  None
-  * @retval None
-  */
-void UsageFault_Handler(void)
-{
-  /* Go to infinite loop when Usage Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles SVCall exception.
-  * @param  None
-  * @retval None
-  */
-void SVC_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Debug Monitor exception.
-  * @param  None
-  * @retval None
-  */
-void DebugMon_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles PendSV_Handler exception.
-  * @param  None
-  * @retval None
-  */
-void PendSV_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles SysTick Handler.
-  * @param  None
-  * @retval None
-  */
-void SysTick_Handler(void)
-{
-}
-
-/******************************************************************************/
-/*                 STM32F10x Peripherals Interrupt Handlers                   */
-/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
-/*  available peripheral interrupt handler's name please refer to the startup */
-/*  file (startup_stm32f10x_xx.s).                                            */
-/******************************************************************************/
-
-/**
-  * @brief  This function handles PPP interrupt request.
-  * @param  None
-  * @retval None
-  */
-/*void PPP_IRQHandler(void)
-{
-}*/
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ADC1_DMA/stm32f10x_it.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ADC1_DMA/stm32f10x_it.h
deleted file mode 100644
index 658cd79..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ADC1_DMA/stm32f10x_it.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    ADC/ADC1_DMA/stm32f10x_it.h 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   This file contains the headers of the interrupt handlers.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_IT_H
-#define __STM32F10x_IT_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-void NMI_Handler(void);
-void HardFault_Handler(void);
-void MemManage_Handler(void);
-void BusFault_Handler(void);
-void UsageFault_Handler(void);
-void SVC_Handler(void);
-void DebugMon_Handler(void);
-void PendSV_Handler(void);
-void SysTick_Handler(void);
-					 
-#endif /* __STM32F10x_IT_H */
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ADC1_DMA/system_stm32f10x.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ADC1_DMA/system_stm32f10x.c
deleted file mode 100644
index c2c3659..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ADC1_DMA/system_stm32f10x.c
+++ /dev/null
@@ -1,1094 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    ADC/ADC1_DMA/system_stm32f10x.c
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
-  * 
-  * 1.  This file provides two functions and one global variable to be called from 
-  *     user application:
-  *      - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
-  *                      factors, AHB/APBx prescalers and Flash settings). 
-  *                      This function is called at startup just after reset and 
-  *                      before branch to main program. This call is made inside
-  *                      the "startup_stm32f10x_xx.s" file.
-  *
-  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
-  *                                  by the user application to setup the SysTick 
-  *                                  timer or configure other parameters.
-  *                                     
-  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
-  *                                 be called whenever the core clock is changed
-  *                                 during program execution.
-  *
-  * 2. After each device reset the HSI (8 MHz) is used as system clock source.
-  *    Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to
-  *    configure the system clock before to branch to main program.
-  *
-  * 3. If the system clock source selected by user fails to startup, the SystemInit()
-  *    function will do nothing and HSI still used as system clock source. User can 
-  *    add some code to deal with this issue inside the SetSysClock() function.
-  *
-  * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on
-  *    the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file. 
-  *    When HSE is used as system clock source, directly or through PLL, and you
-  *    are using different crystal you have to adapt the HSE value to your own
-  *    configuration.
-  *        
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */
-
-/** @addtogroup CMSIS
-  * @{
-  */
-
-/** @addtogroup stm32f10x_system
-  * @{
-  */  
-  
-/** @addtogroup STM32F10x_System_Private_Includes
-  * @{
-  */
-
-#include "stm32f10x.h"
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_TypesDefinitions
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Defines
-  * @{
-  */
-
-/*!< Uncomment the line corresponding to the desired System clock (SYSCLK)
-   frequency (after reset the HSI is used as SYSCLK source)
-   
-   IMPORTANT NOTE:
-   ============== 
-   1. After each device reset the HSI is used as System clock source.
-
-   2. Please make sure that the selected System clock doesn't exceed your device's
-      maximum frequency.
-      
-   3. If none of the define below is enabled, the HSI is used as System clock
-    source.
-
-   4. The System clock configuration functions provided within this file assume that:
-        - For Low, Medium and High density Value line devices an external 8MHz 
-          crystal is used to drive the System clock.
-        - For Low, Medium and High density devices an external 8MHz crystal is
-          used to drive the System clock.
-        - For Connectivity line devices an external 25MHz crystal is used to drive
-          the System clock.
-     If you are using different crystal you have to adapt those functions accordingly.
-    */
-    
-#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-/* #define SYSCLK_FREQ_HSE    HSE_VALUE */
- #define SYSCLK_FREQ_24MHz  24000000
-#else
-/* #define SYSCLK_FREQ_HSE    HSE_VALUE */
-/* #define SYSCLK_FREQ_24MHz  24000000 */ 
-/* #define SYSCLK_FREQ_36MHz  36000000 */
-/* #define SYSCLK_FREQ_48MHz  48000000 */
- #define SYSCLK_FREQ_56MHz  56000000 
-/* #define SYSCLK_FREQ_72MHz  72000000 */
-#endif
-
-/*!< Uncomment the following line if you need to use external SRAM mounted
-     on STM3210E-EVAL board (STM32 High density and XL-density devices) or on 
-     STM32100E-EVAL board (STM32 High-density value line devices) as data memory */ 
-#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
-/* #define DATA_IN_ExtSRAM */
-#endif
-
-/*!< Uncomment the following line if you need to relocate your vector Table in
-     Internal SRAM. */ 
-/* #define VECT_TAB_SRAM */
-#define VECT_TAB_OFFSET  0x0 /*!< Vector Table base offset field. 
-                                  This value must be a multiple of 0x200. */
-
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Macros
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Variables
-  * @{
-  */
-
-/*******************************************************************************
-*  Clock Definitions
-*******************************************************************************/
-#ifdef SYSCLK_FREQ_HSE
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_HSE;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_24MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_24MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_36MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_36MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_48MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_48MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_56MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_56MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_72MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_72MHz;        /*!< System Clock Frequency (Core Clock) */
-#else /*!< HSI Selected as System Clock source */
-  uint32_t SystemCoreClock         = HSI_VALUE;        /*!< System Clock Frequency (Core Clock) */
-#endif
-
-__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_FunctionPrototypes
-  * @{
-  */
-
-static void SetSysClock(void);
-
-#ifdef SYSCLK_FREQ_HSE
-  static void SetSysClockToHSE(void);
-#elif defined SYSCLK_FREQ_24MHz
-  static void SetSysClockTo24(void);
-#elif defined SYSCLK_FREQ_36MHz
-  static void SetSysClockTo36(void);
-#elif defined SYSCLK_FREQ_48MHz
-  static void SetSysClockTo48(void);
-#elif defined SYSCLK_FREQ_56MHz
-  static void SetSysClockTo56(void);  
-#elif defined SYSCLK_FREQ_72MHz
-  static void SetSysClockTo72(void);
-#endif
-
-#ifdef DATA_IN_ExtSRAM
-  static void SystemInit_ExtMemCtl(void); 
-#endif /* DATA_IN_ExtSRAM */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Functions
-  * @{
-  */
-
-/**
-  * @brief  Setup the microcontroller system
-  *         Initialize the Embedded Flash Interface, the PLL and update the 
-  *         SystemCoreClock variable.
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-void SystemInit (void)
-{
-  /* Reset the RCC clock configuration to the default reset state(for debug purpose) */
-  /* Set HSION bit */
-  RCC->CR |= (uint32_t)0x00000001;
-
-  /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
-#ifndef STM32F10X_CL
-  RCC->CFGR &= (uint32_t)0xF8FF0000;
-#else
-  RCC->CFGR &= (uint32_t)0xF0FF0000;
-#endif /* STM32F10X_CL */   
-  
-  /* Reset HSEON, CSSON and PLLON bits */
-  RCC->CR &= (uint32_t)0xFEF6FFFF;
-
-  /* Reset HSEBYP bit */
-  RCC->CR &= (uint32_t)0xFFFBFFFF;
-
-  /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
-  RCC->CFGR &= (uint32_t)0xFF80FFFF;
-
-#ifdef STM32F10X_CL
-  /* Reset PLL2ON and PLL3ON bits */
-  RCC->CR &= (uint32_t)0xEBFFFFFF;
-
-  /* Disable all interrupts and clear pending bits  */
-  RCC->CIR = 0x00FF0000;
-
-  /* Reset CFGR2 register */
-  RCC->CFGR2 = 0x00000000;
-#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-  /* Disable all interrupts and clear pending bits  */
-  RCC->CIR = 0x009F0000;
-
-  /* Reset CFGR2 register */
-  RCC->CFGR2 = 0x00000000;      
-#else
-  /* Disable all interrupts and clear pending bits  */
-  RCC->CIR = 0x009F0000;
-#endif /* STM32F10X_CL */
-    
-#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
-  #ifdef DATA_IN_ExtSRAM
-    SystemInit_ExtMemCtl(); 
-  #endif /* DATA_IN_ExtSRAM */
-#endif 
-
-  /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */
-  /* Configure the Flash Latency cycles and enable prefetch buffer */
-  SetSysClock();
-
-#ifdef VECT_TAB_SRAM
-  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
-#else
-  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
-#endif 
-}
-
-/**
-  * @brief  Update SystemCoreClock variable according to Clock Register Values.
-  *         The SystemCoreClock variable contains the core clock (HCLK), it can
-  *         be used by the user application to setup the SysTick timer or configure
-  *         other parameters.
-  *           
-  * @note   Each time the core clock (HCLK) changes, this function must be called
-  *         to update SystemCoreClock variable value. Otherwise, any configuration
-  *         based on this variable will be incorrect.         
-  *     
-  * @note   - The system frequency computed by this function is not the real 
-  *           frequency in the chip. It is calculated based on the predefined 
-  *           constant and the selected clock source:
-  *             
-  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
-  *                                              
-  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
-  *                          
-  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
-  *             or HSI_VALUE(*) multiplied by the PLL factors.
-  *         
-  *         (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
-  *             8 MHz) but the real value may vary depending on the variations
-  *             in voltage and temperature.   
-  *    
-  *         (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
-  *              8 MHz or 25 MHz, depedning on the product used), user has to ensure
-  *              that HSE_VALUE is same as the real frequency of the crystal used.
-  *              Otherwise, this function may have wrong result.
-  *                
-  *         - The result of this function could be not correct when using fractional
-  *           value for HSE crystal.
-  * @param  None
-  * @retval None
-  */
-void SystemCoreClockUpdate (void)
-{
-  uint32_t tmp = 0, pllmull = 0, pllsource = 0;
-
-#ifdef  STM32F10X_CL
-  uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0;
-#endif /* STM32F10X_CL */
-
-#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-  uint32_t prediv1factor = 0;
-#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */
-    
-  /* Get SYSCLK source -------------------------------------------------------*/
-  tmp = RCC->CFGR & RCC_CFGR_SWS;
-  
-  switch (tmp)
-  {
-    case 0x00:  /* HSI used as system clock */
-      SystemCoreClock = HSI_VALUE;
-      break;
-    case 0x04:  /* HSE used as system clock */
-      SystemCoreClock = HSE_VALUE;
-      break;
-    case 0x08:  /* PLL used as system clock */
-
-      /* Get PLL clock source and multiplication factor ----------------------*/
-      pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
-      pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
-      
-#ifndef STM32F10X_CL      
-      pllmull = ( pllmull >> 18) + 2;
-      
-      if (pllsource == 0x00)
-      {
-        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
-        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
-      }
-      else
-      {
- #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-       prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
-       /* HSE oscillator clock selected as PREDIV1 clock entry */
-       SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; 
- #else
-        /* HSE selected as PLL clock entry */
-        if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
-        {/* HSE oscillator clock divided by 2 */
-          SystemCoreClock = (HSE_VALUE >> 1) * pllmull;
-        }
-        else
-        {
-          SystemCoreClock = HSE_VALUE * pllmull;
-        }
- #endif
-      }
-#else
-      pllmull = pllmull >> 18;
-      
-      if (pllmull != 0x0D)
-      {
-         pllmull += 2;
-      }
-      else
-      { /* PLL multiplication factor = PLL input clock * 6.5 */
-        pllmull = 13 / 2; 
-      }
-            
-      if (pllsource == 0x00)
-      {
-        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
-        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
-      }
-      else
-      {/* PREDIV1 selected as PLL clock entry */
-        
-        /* Get PREDIV1 clock source and division factor */
-        prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
-        prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
-        
-        if (prediv1source == 0)
-        { 
-          /* HSE oscillator clock selected as PREDIV1 clock entry */
-          SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;          
-        }
-        else
-        {/* PLL2 clock selected as PREDIV1 clock entry */
-          
-          /* Get PREDIV2 division factor and PLL2 multiplication factor */
-          prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1;
-          pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; 
-          SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;                         
-        }
-      }
-#endif /* STM32F10X_CL */ 
-      break;
-
-    default:
-      SystemCoreClock = HSI_VALUE;
-      break;
-  }
-  
-  /* Compute HCLK clock frequency ----------------*/
-  /* Get HCLK prescaler */
-  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
-  /* HCLK clock frequency */
-  SystemCoreClock >>= tmp;  
-}
-
-/**
-  * @brief  Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClock(void)
-{
-#ifdef SYSCLK_FREQ_HSE
-  SetSysClockToHSE();
-#elif defined SYSCLK_FREQ_24MHz
-  SetSysClockTo24();
-#elif defined SYSCLK_FREQ_36MHz
-  SetSysClockTo36();
-#elif defined SYSCLK_FREQ_48MHz
-  SetSysClockTo48();
-#elif defined SYSCLK_FREQ_56MHz
-  SetSysClockTo56();  
-#elif defined SYSCLK_FREQ_72MHz
-  SetSysClockTo72();
-#endif
- 
- /* If none of the define above is enabled, the HSI is used as System clock
-    source (default after reset) */ 
-}
-
-/**
-  * @brief  Setup the external memory controller. Called in startup_stm32f10x.s 
-  *          before jump to __main
-  * @param  None
-  * @retval None
-  */ 
-#ifdef DATA_IN_ExtSRAM
-/**
-  * @brief  Setup the external memory controller. 
-  *         Called in startup_stm32f10x_xx.s/.c before jump to main.
-  * 	      This function configures the external SRAM mounted on STM3210E-EVAL
-  *         board (STM32 High density devices). This SRAM will be used as program
-  *         data memory (including heap and stack).
-  * @param  None
-  * @retval None
-  */ 
-void SystemInit_ExtMemCtl(void) 
-{
-/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is 
-  required, then adjust the Register Addresses */
-
-  /* Enable FSMC clock */
-  RCC->AHBENR = 0x00000114;
-  
-  /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */  
-  RCC->APB2ENR = 0x000001E0;
-  
-/* ---------------  SRAM Data lines, NOE and NWE configuration ---------------*/
-/*----------------  SRAM Address lines configuration -------------------------*/
-/*----------------  NOE and NWE configuration --------------------------------*/  
-/*----------------  NE3 configuration ----------------------------------------*/
-/*----------------  NBL0, NBL1 configuration ---------------------------------*/
-  
-  GPIOD->CRL = 0x44BB44BB;  
-  GPIOD->CRH = 0xBBBBBBBB;
-
-  GPIOE->CRL = 0xB44444BB;  
-  GPIOE->CRH = 0xBBBBBBBB;
-
-  GPIOF->CRL = 0x44BBBBBB;  
-  GPIOF->CRH = 0xBBBB4444;
-
-  GPIOG->CRL = 0x44BBBBBB;  
-  GPIOG->CRH = 0x44444B44;
-   
-/*----------------  FSMC Configuration ---------------------------------------*/  
-/*----------------  Enable FSMC Bank1_SRAM Bank ------------------------------*/
-  
-  FSMC_Bank1->BTCR[4] = 0x00001011;
-  FSMC_Bank1->BTCR[5] = 0x00000200;
-}
-#endif /* DATA_IN_ExtSRAM */
-
-#ifdef SYSCLK_FREQ_HSE
-/**
-  * @brief  Selects HSE as System clock source and configure HCLK, PCLK2
-  *          and PCLK1 prescalers.
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockToHSE(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-
-#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 0 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-
-#ifndef STM32F10X_CL
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
-#else
-    if (HSE_VALUE <= 24000000)
-	{
-      FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
-	}
-	else
-	{
-      FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
-	}
-#endif /* STM32F10X_CL */
-#endif
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
-    
-    /* Select HSE as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE;    
-
-    /* Wait till HSE is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  }  
-}
-#elif defined SYSCLK_FREQ_24MHz
-/**
-  * @brief  Sets System clock frequency to 24MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers.
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo24(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL 
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 0 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;    
-#endif
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
-    
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL6); 
-
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */       
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }   
-#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
-    /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6);
-#else    
-    /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-#elif defined SYSCLK_FREQ_36MHz
-/**
-  * @brief  Sets System clock frequency to 36MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo36(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 1 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
-    
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    
-    /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL9); 
-
-	/*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-#else    
-    /*  PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-#elif defined SYSCLK_FREQ_48MHz
-/**
-  * @brief  Sets System clock frequency to 48MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo48(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 1 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
-    
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-   
-    /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL6); 
-#else    
-    /*  PLL configuration: PLLCLK = HSE * 6 = 48 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-
-#elif defined SYSCLK_FREQ_56MHz
-/**
-  * @brief  Sets System clock frequency to 56MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo56(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/   
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 2 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
-
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-   
-    /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL7); 
-#else     
-    /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7);
-
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-
-#elif defined SYSCLK_FREQ_72MHz
-/**
-  * @brief  Sets System clock frequency to 72MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo72(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 2 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
-
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
-
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-   
-    /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL9); 
-#else    
-    /*  PLL configuration: PLLCLK = HSE * 9 = 72 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE |
-                                        RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-    
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  }
-}
-#endif
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-  
-/**
-  * @}
-  */    
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/AnalogWatchdog/stm32f10x_conf.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/AnalogWatchdog/stm32f10x_conf.h
deleted file mode 100644
index de24e23..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/AnalogWatchdog/stm32f10x_conf.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    ADC/AnalogWatchdog/stm32f10x_conf.h 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Library configuration file.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_CONF_H
-#define __STM32F10x_CONF_H
-
-/* Includes ------------------------------------------------------------------*/
-/* Uncomment/Comment the line below to enable/disable peripheral header file inclusion */
-#include "stm32f10x_adc.h"
-#include "stm32f10x_bkp.h"
-#include "stm32f10x_can.h"
-#include "stm32f10x_cec.h"
-#include "stm32f10x_crc.h"
-#include "stm32f10x_dac.h"
-#include "stm32f10x_dbgmcu.h"
-#include "stm32f10x_dma.h"
-#include "stm32f10x_exti.h"
-#include "stm32f10x_flash.h"
-#include "stm32f10x_fsmc.h"
-#include "stm32f10x_gpio.h"
-#include "stm32f10x_i2c.h"
-#include "stm32f10x_iwdg.h"
-#include "stm32f10x_pwr.h"
-#include "stm32f10x_rcc.h"
-#include "stm32f10x_rtc.h"
-#include "stm32f10x_sdio.h"
-#include "stm32f10x_spi.h"
-#include "stm32f10x_tim.h"
-#include "stm32f10x_usart.h"
-#include "stm32f10x_wwdg.h"
-#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Uncomment the line below to expanse the "assert_param" macro in the 
-   Standard Peripheral Library drivers code */
-/* #define USE_FULL_ASSERT    1 */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function which reports 
-  *         the name of the source file and the source line number of the call 
-  *         that failed. If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0)
-#endif /* USE_FULL_ASSERT */
-
-#endif /* __STM32F10x_CONF_H */
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/AnalogWatchdog/stm32f10x_it.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/AnalogWatchdog/stm32f10x_it.c
deleted file mode 100644
index d482d69..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/AnalogWatchdog/stm32f10x_it.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    ADC/AnalogWatchdog/stm32f10x_it.c 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Main Interrupt Service Routines.
-  *          This file provides template for all exceptions handler and peripherals
-  *          interrupt service routine.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_it.h"
-#include "stm32_eval.h"
-
-/** @addtogroup STM32F10x_StdPeriph_Examples
-  * @{
-  */
-
-/** @addtogroup ADC_AnalogWatchdog
-  * @{
-  */ 
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/******************************************************************************/
-/*            Cortex-M3 Processor Exceptions Handlers                         */
-/******************************************************************************/
-
-/**
-  * @brief  This function handles NMI exception.
-  * @param  None
-  * @retval None
-  */
-void NMI_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Hard Fault exception.
-  * @param  None
-  * @retval None
-  */
-void HardFault_Handler(void)
-{
-  /* Go to infinite loop when Hard Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Memory Manage exception.
-  * @param  None
-  * @retval None
-  */
-void MemManage_Handler(void)
-{
-  /* Go to infinite loop when Memory Manage exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Bus Fault exception.
-  * @param  None
-  * @retval None
-  */
-void BusFault_Handler(void)
-{
-  /* Go to infinite loop when Bus Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Usage Fault exception.
-  * @param  None
-  * @retval None
-  */
-void UsageFault_Handler(void)
-{
-  /* Go to infinite loop when Usage Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles SVCall exception.
-  * @param  None
-  * @retval None
-  */
-void SVC_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Debug Monitor exception.
-  * @param  None
-  * @retval None
-  */
-void DebugMon_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles PendSV_Handler exception.
-  * @param  None
-  * @retval None
-  */
-void PendSV_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles SysTick Handler.
-  * @param  None
-  * @retval None
-  */
-void SysTick_Handler(void)
-{
-}
-
-/******************************************************************************/
-/*            STM32F10x Peripherals Interrupt Handlers                        */
-/******************************************************************************/
-
-/**
-  * @brief  This function handles ADC1 and ADC2 global interrupts requests.
-  * @param  None
-  * @retval None
-  */
-#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
-void ADC1_IRQHandler(void)
-#else
-void ADC1_2_IRQHandler(void)
-#endif
-{
-  /* Toggle LED1 */
-  STM_EVAL_LEDOn(LED1);
-  STM_EVAL_LEDOff(LED1);
-  
-  /* Clear ADC1 AWD pending interrupt bit */
-  ADC_ClearITPendingBit(ADC1, ADC_IT_AWD);
-}
-
-/******************************************************************************/
-/*                 STM32F10x Peripherals Interrupt Handlers                   */
-/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
-/*  available peripheral interrupt handler's name please refer to the startup */
-/*  file (startup_stm32f10x_xx.s).                                            */
-/******************************************************************************/
-
-/**
-  * @brief  This function handles PPP interrupt request.
-  * @param  None
-  * @retval None
-  */
-/*void PPP_IRQHandler(void)
-{
-}*/
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/AnalogWatchdog/stm32f10x_it.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/AnalogWatchdog/stm32f10x_it.h
deleted file mode 100644
index 59a502e..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/AnalogWatchdog/stm32f10x_it.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    ADC/AnalogWatchdog/stm32f10x_it.h 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   This file contains the headers of the interrupt handlers.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_IT_H
-#define __STM32F10x_IT_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-void NMI_Handler(void);
-void HardFault_Handler(void);
-void MemManage_Handler(void);
-void BusFault_Handler(void);
-void UsageFault_Handler(void);
-void SVC_Handler(void);
-void DebugMon_Handler(void);
-void PendSV_Handler(void);
-void SysTick_Handler(void);
-#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
-void ADC1_IRQHandler(void);
-#else
-void ADC1_2_IRQHandler(void);
-#endif
-					 
-#endif /* __STM32F10x_IT_H */
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/AnalogWatchdog/system_stm32f10x.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/AnalogWatchdog/system_stm32f10x.c
deleted file mode 100644
index 64f1272..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/AnalogWatchdog/system_stm32f10x.c
+++ /dev/null
@@ -1,1094 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    ADC/AnalogWatchdog/system_stm32f10x.c
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
-  * 
-  * 1.  This file provides two functions and one global variable to be called from 
-  *     user application:
-  *      - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
-  *                      factors, AHB/APBx prescalers and Flash settings). 
-  *                      This function is called at startup just after reset and 
-  *                      before branch to main program. This call is made inside
-  *                      the "startup_stm32f10x_xx.s" file.
-  *
-  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
-  *                                  by the user application to setup the SysTick 
-  *                                  timer or configure other parameters.
-  *                                     
-  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
-  *                                 be called whenever the core clock is changed
-  *                                 during program execution.
-  *
-  * 2. After each device reset the HSI (8 MHz) is used as system clock source.
-  *    Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to
-  *    configure the system clock before to branch to main program.
-  *
-  * 3. If the system clock source selected by user fails to startup, the SystemInit()
-  *    function will do nothing and HSI still used as system clock source. User can 
-  *    add some code to deal with this issue inside the SetSysClock() function.
-  *
-  * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on
-  *    the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file. 
-  *    When HSE is used as system clock source, directly or through PLL, and you
-  *    are using different crystal you have to adapt the HSE value to your own
-  *    configuration.
-  *        
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */
-
-/** @addtogroup CMSIS
-  * @{
-  */
-
-/** @addtogroup stm32f10x_system
-  * @{
-  */  
-  
-/** @addtogroup STM32F10x_System_Private_Includes
-  * @{
-  */
-
-#include "stm32f10x.h"
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_TypesDefinitions
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Defines
-  * @{
-  */
-
-/*!< Uncomment the line corresponding to the desired System clock (SYSCLK)
-   frequency (after reset the HSI is used as SYSCLK source)
-   
-   IMPORTANT NOTE:
-   ============== 
-   1. After each device reset the HSI is used as System clock source.
-
-   2. Please make sure that the selected System clock doesn't exceed your device's
-      maximum frequency.
-      
-   3. If none of the define below is enabled, the HSI is used as System clock
-    source.
-
-   4. The System clock configuration functions provided within this file assume that:
-        - For Low, Medium and High density Value line devices an external 8MHz 
-          crystal is used to drive the System clock.
-        - For Low, Medium and High density devices an external 8MHz crystal is
-          used to drive the System clock.
-        - For Connectivity line devices an external 25MHz crystal is used to drive
-          the System clock.
-     If you are using different crystal you have to adapt those functions accordingly.
-    */
-    
-#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-/* #define SYSCLK_FREQ_HSE    HSE_VALUE */
- #define SYSCLK_FREQ_24MHz  24000000
-#else
-/* #define SYSCLK_FREQ_HSE    HSE_VALUE */
-/* #define SYSCLK_FREQ_24MHz  24000000 */ 
-/* #define SYSCLK_FREQ_36MHz  36000000 */
-/* #define SYSCLK_FREQ_48MHz  48000000 */
- #define SYSCLK_FREQ_56MHz  56000000
-/* #define SYSCLK_FREQ_72MHz  72000000 */
-#endif
-
-/*!< Uncomment the following line if you need to use external SRAM mounted
-     on STM3210E-EVAL board (STM32 High density and XL-density devices) or on 
-     STM32100E-EVAL board (STM32 High-density value line devices) as data memory */ 
-#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
-/* #define DATA_IN_ExtSRAM */
-#endif
-
-/*!< Uncomment the following line if you need to relocate your vector Table in
-     Internal SRAM. */ 
-/* #define VECT_TAB_SRAM */
-#define VECT_TAB_OFFSET  0x0 /*!< Vector Table base offset field. 
-                                  This value must be a multiple of 0x200. */
-
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Macros
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Variables
-  * @{
-  */
-
-/*******************************************************************************
-*  Clock Definitions
-*******************************************************************************/
-#ifdef SYSCLK_FREQ_HSE
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_HSE;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_24MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_24MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_36MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_36MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_48MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_48MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_56MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_56MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_72MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_72MHz;        /*!< System Clock Frequency (Core Clock) */
-#else /*!< HSI Selected as System Clock source */
-  uint32_t SystemCoreClock         = HSI_VALUE;        /*!< System Clock Frequency (Core Clock) */
-#endif
-
-__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_FunctionPrototypes
-  * @{
-  */
-
-static void SetSysClock(void);
-
-#ifdef SYSCLK_FREQ_HSE
-  static void SetSysClockToHSE(void);
-#elif defined SYSCLK_FREQ_24MHz
-  static void SetSysClockTo24(void);
-#elif defined SYSCLK_FREQ_36MHz
-  static void SetSysClockTo36(void);
-#elif defined SYSCLK_FREQ_48MHz
-  static void SetSysClockTo48(void);
-#elif defined SYSCLK_FREQ_56MHz
-  static void SetSysClockTo56(void);  
-#elif defined SYSCLK_FREQ_72MHz
-  static void SetSysClockTo72(void);
-#endif
-
-#ifdef DATA_IN_ExtSRAM
-  static void SystemInit_ExtMemCtl(void); 
-#endif /* DATA_IN_ExtSRAM */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Functions
-  * @{
-  */
-
-/**
-  * @brief  Setup the microcontroller system
-  *         Initialize the Embedded Flash Interface, the PLL and update the 
-  *         SystemCoreClock variable.
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-void SystemInit (void)
-{
-  /* Reset the RCC clock configuration to the default reset state(for debug purpose) */
-  /* Set HSION bit */
-  RCC->CR |= (uint32_t)0x00000001;
-
-  /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
-#ifndef STM32F10X_CL
-  RCC->CFGR &= (uint32_t)0xF8FF0000;
-#else
-  RCC->CFGR &= (uint32_t)0xF0FF0000;
-#endif /* STM32F10X_CL */   
-  
-  /* Reset HSEON, CSSON and PLLON bits */
-  RCC->CR &= (uint32_t)0xFEF6FFFF;
-
-  /* Reset HSEBYP bit */
-  RCC->CR &= (uint32_t)0xFFFBFFFF;
-
-  /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
-  RCC->CFGR &= (uint32_t)0xFF80FFFF;
-
-#ifdef STM32F10X_CL
-  /* Reset PLL2ON and PLL3ON bits */
-  RCC->CR &= (uint32_t)0xEBFFFFFF;
-
-  /* Disable all interrupts and clear pending bits  */
-  RCC->CIR = 0x00FF0000;
-
-  /* Reset CFGR2 register */
-  RCC->CFGR2 = 0x00000000;
-#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-  /* Disable all interrupts and clear pending bits  */
-  RCC->CIR = 0x009F0000;
-
-  /* Reset CFGR2 register */
-  RCC->CFGR2 = 0x00000000;      
-#else
-  /* Disable all interrupts and clear pending bits  */
-  RCC->CIR = 0x009F0000;
-#endif /* STM32F10X_CL */
-    
-#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
-  #ifdef DATA_IN_ExtSRAM
-    SystemInit_ExtMemCtl(); 
-  #endif /* DATA_IN_ExtSRAM */
-#endif 
-
-  /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */
-  /* Configure the Flash Latency cycles and enable prefetch buffer */
-  SetSysClock();
-
-#ifdef VECT_TAB_SRAM
-  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
-#else
-  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
-#endif 
-}
-
-/**
-  * @brief  Update SystemCoreClock variable according to Clock Register Values.
-  *         The SystemCoreClock variable contains the core clock (HCLK), it can
-  *         be used by the user application to setup the SysTick timer or configure
-  *         other parameters.
-  *           
-  * @note   Each time the core clock (HCLK) changes, this function must be called
-  *         to update SystemCoreClock variable value. Otherwise, any configuration
-  *         based on this variable will be incorrect.         
-  *     
-  * @note   - The system frequency computed by this function is not the real 
-  *           frequency in the chip. It is calculated based on the predefined 
-  *           constant and the selected clock source:
-  *             
-  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
-  *                                              
-  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
-  *                          
-  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
-  *             or HSI_VALUE(*) multiplied by the PLL factors.
-  *         
-  *         (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
-  *             8 MHz) but the real value may vary depending on the variations
-  *             in voltage and temperature.   
-  *    
-  *         (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
-  *              8 MHz or 25 MHz, depedning on the product used), user has to ensure
-  *              that HSE_VALUE is same as the real frequency of the crystal used.
-  *              Otherwise, this function may have wrong result.
-  *                
-  *         - The result of this function could be not correct when using fractional
-  *           value for HSE crystal.
-  * @param  None
-  * @retval None
-  */
-void SystemCoreClockUpdate (void)
-{
-  uint32_t tmp = 0, pllmull = 0, pllsource = 0;
-
-#ifdef  STM32F10X_CL
-  uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0;
-#endif /* STM32F10X_CL */
-
-#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-  uint32_t prediv1factor = 0;
-#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */
-    
-  /* Get SYSCLK source -------------------------------------------------------*/
-  tmp = RCC->CFGR & RCC_CFGR_SWS;
-  
-  switch (tmp)
-  {
-    case 0x00:  /* HSI used as system clock */
-      SystemCoreClock = HSI_VALUE;
-      break;
-    case 0x04:  /* HSE used as system clock */
-      SystemCoreClock = HSE_VALUE;
-      break;
-    case 0x08:  /* PLL used as system clock */
-
-      /* Get PLL clock source and multiplication factor ----------------------*/
-      pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
-      pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
-      
-#ifndef STM32F10X_CL      
-      pllmull = ( pllmull >> 18) + 2;
-      
-      if (pllsource == 0x00)
-      {
-        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
-        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
-      }
-      else
-      {
- #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-       prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
-       /* HSE oscillator clock selected as PREDIV1 clock entry */
-       SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; 
- #else
-        /* HSE selected as PLL clock entry */
-        if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
-        {/* HSE oscillator clock divided by 2 */
-          SystemCoreClock = (HSE_VALUE >> 1) * pllmull;
-        }
-        else
-        {
-          SystemCoreClock = HSE_VALUE * pllmull;
-        }
- #endif
-      }
-#else
-      pllmull = pllmull >> 18;
-      
-      if (pllmull != 0x0D)
-      {
-         pllmull += 2;
-      }
-      else
-      { /* PLL multiplication factor = PLL input clock * 6.5 */
-        pllmull = 13 / 2; 
-      }
-            
-      if (pllsource == 0x00)
-      {
-        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
-        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
-      }
-      else
-      {/* PREDIV1 selected as PLL clock entry */
-        
-        /* Get PREDIV1 clock source and division factor */
-        prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
-        prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
-        
-        if (prediv1source == 0)
-        { 
-          /* HSE oscillator clock selected as PREDIV1 clock entry */
-          SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;          
-        }
-        else
-        {/* PLL2 clock selected as PREDIV1 clock entry */
-          
-          /* Get PREDIV2 division factor and PLL2 multiplication factor */
-          prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1;
-          pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; 
-          SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;                         
-        }
-      }
-#endif /* STM32F10X_CL */ 
-      break;
-
-    default:
-      SystemCoreClock = HSI_VALUE;
-      break;
-  }
-  
-  /* Compute HCLK clock frequency ----------------*/
-  /* Get HCLK prescaler */
-  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
-  /* HCLK clock frequency */
-  SystemCoreClock >>= tmp;  
-}
-
-/**
-  * @brief  Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClock(void)
-{
-#ifdef SYSCLK_FREQ_HSE
-  SetSysClockToHSE();
-#elif defined SYSCLK_FREQ_24MHz
-  SetSysClockTo24();
-#elif defined SYSCLK_FREQ_36MHz
-  SetSysClockTo36();
-#elif defined SYSCLK_FREQ_48MHz
-  SetSysClockTo48();
-#elif defined SYSCLK_FREQ_56MHz
-  SetSysClockTo56();  
-#elif defined SYSCLK_FREQ_72MHz
-  SetSysClockTo72();
-#endif
- 
- /* If none of the define above is enabled, the HSI is used as System clock
-    source (default after reset) */ 
-}
-
-/**
-  * @brief  Setup the external memory controller. Called in startup_stm32f10x.s 
-  *          before jump to __main
-  * @param  None
-  * @retval None
-  */ 
-#ifdef DATA_IN_ExtSRAM
-/**
-  * @brief  Setup the external memory controller. 
-  *         Called in startup_stm32f10x_xx.s/.c before jump to main.
-  * 	      This function configures the external SRAM mounted on STM3210E-EVAL
-  *         board (STM32 High density devices). This SRAM will be used as program
-  *         data memory (including heap and stack).
-  * @param  None
-  * @retval None
-  */ 
-void SystemInit_ExtMemCtl(void) 
-{
-/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is 
-  required, then adjust the Register Addresses */
-
-  /* Enable FSMC clock */
-  RCC->AHBENR = 0x00000114;
-  
-  /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */  
-  RCC->APB2ENR = 0x000001E0;
-  
-/* ---------------  SRAM Data lines, NOE and NWE configuration ---------------*/
-/*----------------  SRAM Address lines configuration -------------------------*/
-/*----------------  NOE and NWE configuration --------------------------------*/  
-/*----------------  NE3 configuration ----------------------------------------*/
-/*----------------  NBL0, NBL1 configuration ---------------------------------*/
-  
-  GPIOD->CRL = 0x44BB44BB;  
-  GPIOD->CRH = 0xBBBBBBBB;
-
-  GPIOE->CRL = 0xB44444BB;  
-  GPIOE->CRH = 0xBBBBBBBB;
-
-  GPIOF->CRL = 0x44BBBBBB;  
-  GPIOF->CRH = 0xBBBB4444;
-
-  GPIOG->CRL = 0x44BBBBBB;  
-  GPIOG->CRH = 0x44444B44;
-   
-/*----------------  FSMC Configuration ---------------------------------------*/  
-/*----------------  Enable FSMC Bank1_SRAM Bank ------------------------------*/
-  
-  FSMC_Bank1->BTCR[4] = 0x00001011;
-  FSMC_Bank1->BTCR[5] = 0x00000200;
-}
-#endif /* DATA_IN_ExtSRAM */
-
-#ifdef SYSCLK_FREQ_HSE
-/**
-  * @brief  Selects HSE as System clock source and configure HCLK, PCLK2
-  *          and PCLK1 prescalers.
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockToHSE(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-
-#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 0 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-
-#ifndef STM32F10X_CL
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
-#else
-    if (HSE_VALUE <= 24000000)
-	{
-      FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
-	}
-	else
-	{
-      FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
-	}
-#endif /* STM32F10X_CL */
-#endif
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
-    
-    /* Select HSE as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE;    
-
-    /* Wait till HSE is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  }  
-}
-#elif defined SYSCLK_FREQ_24MHz
-/**
-  * @brief  Sets System clock frequency to 24MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers.
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo24(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL 
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 0 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;    
-#endif
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
-    
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL6); 
-
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */       
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }   
-#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
-    /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6);
-#else    
-    /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-#elif defined SYSCLK_FREQ_36MHz
-/**
-  * @brief  Sets System clock frequency to 36MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo36(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 1 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
-    
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    
-    /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL9); 
-
-	/*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-#else    
-    /*  PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-#elif defined SYSCLK_FREQ_48MHz
-/**
-  * @brief  Sets System clock frequency to 48MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo48(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 1 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
-    
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-   
-    /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL6); 
-#else    
-    /*  PLL configuration: PLLCLK = HSE * 6 = 48 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-
-#elif defined SYSCLK_FREQ_56MHz
-/**
-  * @brief  Sets System clock frequency to 56MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo56(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/   
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 2 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
-
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-   
-    /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL7); 
-#else     
-    /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7);
-
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-
-#elif defined SYSCLK_FREQ_72MHz
-/**
-  * @brief  Sets System clock frequency to 72MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo72(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 2 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
-
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
-
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-   
-    /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL9); 
-#else    
-    /*  PLL configuration: PLLCLK = HSE * 9 = 72 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE |
-                                        RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-    
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  }
-}
-#endif
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-  
-/**
-  * @}
-  */    
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ExtLinesTrigger/main.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ExtLinesTrigger/main.c
deleted file mode 100644
index 8118c04..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ExtLinesTrigger/main.c
+++ /dev/null
@@ -1,292 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    ADC/ExtLinesTrigger/main.c 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Main program body
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x.h"
-
-/** @addtogroup STM32F10x_StdPeriph_Examples
-  * @{
-  */
-
-/** @addtogroup ADC_ExtLinesTrigger
-  * @{
-  */ 
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-#define ADC1_DR_Address    ((uint32_t)0x4001244C)
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-ADC_InitTypeDef   ADC_InitStructure;
-DMA_InitTypeDef   DMA_InitStructure;
-__IO uint16_t ADC_RegularConvertedValueTab[64], ADC_InjectedConvertedValueTab[32];
-
-/* Private function prototypes -----------------------------------------------*/
-void RCC_Configuration(void);
-void GPIO_Configuration(void);
-void NVIC_Configuration(void);
-void EXTI_Configuration(void);
-
-/* Private functions ---------------------------------------------------------*/
-
-/**
-  * @brief   Main program
-  * @param  None
-  * @retval None
-  */
-int main(void)
-{
-  /*!< At this stage the microcontroller clock setting is already configured, 
-       this is done through SystemInit() function which is called from startup
-       file (startup_stm32f10x_xx.s) before to branch to application main.
-       To reconfigure the default setting of SystemInit() function, refer to
-       system_stm32f10x.c file
-     */     
-       
-  /* System clocks configuration ---------------------------------------------*/
-  RCC_Configuration();
-
-  /* NVIC configuration ------------------------------------------------------*/
-  NVIC_Configuration();
-
-  /* GPIO configuration ------------------------------------------------------*/
-  GPIO_Configuration();
-
-  /* EXTI configuration ------------------------------------------------------*/
-  EXTI_Configuration();
-
-  /* DMA1 channel1 configuration ----------------------------------------------*/
-  DMA_DeInit(DMA1_Channel1);
-  DMA_InitStructure.DMA_PeripheralBaseAddr = ADC1_DR_Address;
-  DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)ADC_RegularConvertedValueTab;
-  DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC;
-  DMA_InitStructure.DMA_BufferSize = 64;
-  DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
-  DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
-  DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
-  DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
-  DMA_InitStructure.DMA_Mode = DMA_Mode_Circular;
-  DMA_InitStructure.DMA_Priority = DMA_Priority_High;
-  DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
-  DMA_Init(DMA1_Channel1, &DMA_InitStructure);
-  
-  /* Enable DMA1 channel1 */
-  DMA_Cmd(DMA1_Channel1, ENABLE);
-  
-  /* ADC1 configuration ------------------------------------------------------*/
-  ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;
-  ADC_InitStructure.ADC_ScanConvMode = ENABLE;
-  ADC_InitStructure.ADC_ContinuousConvMode = DISABLE;
-  ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO;
-  ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
-  ADC_InitStructure.ADC_NbrOfChannel = 2;
-  ADC_Init(ADC1, &ADC_InitStructure);
-
-  /* ADC1 regular channels configuration */ 
-  ADC_RegularChannelConfig(ADC1, ADC_Channel_4, 1, ADC_SampleTime_28Cycles5);
-  ADC_RegularChannelConfig(ADC1, ADC_Channel_14, 2, ADC_SampleTime_28Cycles5);
-
-  /* Regular discontinuous mode channel number configuration */
-  ADC_DiscModeChannelCountConfig(ADC1, 1);
-  /* Enable regular discontinuous mode */
-  ADC_DiscModeCmd(ADC1, ENABLE);
-
-  /* Enable ADC1 external trigger conversion */ 
-  ADC_ExternalTrigConvCmd(ADC1, ENABLE);
-
-  /* Set injected sequencer length */
-  ADC_InjectedSequencerLengthConfig(ADC1, 2);
-  /* ADC1 injected channel configuration */ 
-  ADC_InjectedChannelConfig(ADC1, ADC_Channel_11, 1, ADC_SampleTime_28Cycles5);
-  ADC_InjectedChannelConfig(ADC1, ADC_Channel_12, 2, ADC_SampleTime_28Cycles5);
-  /* ADC1 injected external trigger configuration */
-  ADC_ExternalTrigInjectedConvConfig(ADC1, ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4);
-  /* Enable ADC1 injected external trigger conversion */
-  ADC_ExternalTrigInjectedConvCmd(ADC1, ENABLE);
-
-  /* Enable JEOC interrupt */
-  ADC_ITConfig(ADC1, ADC_IT_JEOC, ENABLE);
-
-  /* Enable ADC1 DMA */
-  ADC_DMACmd(ADC1, ENABLE);
-  
-  /* Enable ADC1 */
-  ADC_Cmd(ADC1, ENABLE);  
-
-  /* Enable ADC1 reset calibration register */   
-  ADC_ResetCalibration(ADC1);
-  /* Check the end of ADC1 reset calibration register */
-  while(ADC_GetResetCalibrationStatus(ADC1));
-
-  /* Start ADC1 calibration */
-  ADC_StartCalibration(ADC1);
-  /* Check the end of ADC1 calibration */
-  while(ADC_GetCalibrationStatus(ADC1));
-
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  Configures the different system clocks.
-  * @param  None
-  * @retval None
-  */
-void RCC_Configuration(void)
-{
-#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
-  /* ADCCLK = PCLK2/2 */
-  RCC_ADCCLKConfig(RCC_PCLK2_Div2);
-#else
-  /* ADCCLK = PCLK2/4 */
-  RCC_ADCCLKConfig(RCC_PCLK2_Div4); 
-#endif
-  /* Enable peripheral clocks ------------------------------------------------*/
-  /* Enable DMA1 clock */
-  RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1, ENABLE);
-
-  /* Enable GPIOs and ADC1 clock */
-  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOC | 
-                         RCC_APB2Periph_GPIOE | RCC_APB2Periph_AFIO |
-                         RCC_APB2Periph_ADC1, ENABLE);
-}
-
-/**
-  * @brief  Configures the different EXTI lines.
-  * @param  None
-  * @retval None
-  */
-void EXTI_Configuration(void)
-{
-  EXTI_InitTypeDef EXTI_InitStructure;
-#ifdef STM32F10X_HD_VL
-  /* Select the EXTI Line11 the GPIO pin source */
-  GPIO_EXTILineConfig(GPIO_PortSourceGPIOF, GPIO_PinSource11);
-#else
-  GPIO_EXTILineConfig(GPIO_PortSourceGPIOE, GPIO_PinSource11);
-#endif
-
-  /* EXTI line11 configuration -----------------------------------------------*/  
-  EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Event;
-  EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising;
-  EXTI_InitStructure.EXTI_Line = EXTI_Line11;
-  EXTI_InitStructure.EXTI_LineCmd = ENABLE;
-  EXTI_Init(&EXTI_InitStructure);
-
-  /* Select the EXTI Line15 the GPIO pin source */
-  GPIO_EXTILineConfig(GPIO_PortSourceGPIOE, GPIO_PinSource15);
-  /* EXTI line15 configuration -----------------------------------------------*/  
-  EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Event;
-  EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising;
-  EXTI_InitStructure.EXTI_Line = EXTI_Line15;
-  EXTI_InitStructure.EXTI_LineCmd = ENABLE;
-  EXTI_Init(&EXTI_InitStructure);
-}
-
-/**
-  * @brief  Configures the different GPIO ports.
-  * @param  None
-  * @retval None
-  */
-void GPIO_Configuration(void)
-{
-  GPIO_InitTypeDef GPIO_InitStructure;
-
-  /* Configure PC.01, PC.02 and PC.04 (ADC Channel11, Channel12 and Channel14)
-   as analog input -----------------------------------------------------------*/
-  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_4;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
-  GPIO_Init(GPIOC, &GPIO_InitStructure);
-
-  /* Configure PA.04 (ADC Channel4) as analog input --------------------------*/
-  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
-  GPIO_Init(GPIOA, &GPIO_InitStructure);
-
-  /* Configure EXTI line11 ---------------------------------------------------*/
-  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
-#ifdef STM32F10X_HD_VL 
-  GPIO_Init(GPIOF, &GPIO_InitStructure);
-#else
-  GPIO_Init(GPIOE, &GPIO_InitStructure);
-#endif
-
-  /* Configure EXTI line15 ---------------------------------------------------*/
-  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_15;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
-  GPIO_Init(GPIOE, &GPIO_InitStructure);
-}
-
-/**
-  * @brief  Configures NVIC and Vector Table base location.
-  * @param  None
-  * @retval None
-  */
-void NVIC_Configuration(void)
-{
-  NVIC_InitTypeDef NVIC_InitStructure;
-
-    /* Configure and enable ADC interrupt */
-#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
-  NVIC_InitStructure.NVIC_IRQChannel = ADC1_IRQn;
-#else
-  NVIC_InitStructure.NVIC_IRQChannel = ADC1_2_IRQn;
-#endif
-  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
-  NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
-  NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
-  NVIC_Init(&NVIC_InitStructure);
-}
-
-#ifdef  USE_FULL_ASSERT
-
-/**
-  * @brief  Reports the name of the source file and the source line number
-  *         where the assert_param error has occurred.
-  * @param  file: pointer to the source file name
-  * @param  line: assert_param error line source number
-  * @retval None
-  */
-void assert_failed(uint8_t* file, uint32_t line)
-{ 
-  /* User can add his own implementation to report the file name and line number,
-     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
-
-  /* Infinite loop */
-  while (1)
-  {
-  }
-}
-
-#endif
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ExtLinesTrigger/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ExtLinesTrigger/readme.txt
deleted file mode 100644
index 2a57195..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ExtLinesTrigger/readme.txt
+++ /dev/null
@@ -1,128 +0,0 @@
-/**
-  @page ADC_ExtLinesTrigger ADC external lines trigger example
-  
-  @verbatim
-  ******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
-  * @file    ADC/ExtLinesTrigger/readme.txt 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Description of the ADC external lines trigger example.
-  ******************************************************************************
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  ******************************************************************************
-   @endverbatim
-
-@par Example Description 
-
-This example describes how to trigger ADC regular and injected groups channels 
-conversion using two external line events. Discontinuous mode is enabled for regular
-group channel conversion and configured to convert one regular channel on each 
-external trigger.
-
-ADC1 is configured to start regular group channel conversion on EXTI11 event.
-On detection of the first rising edge on PE.11 pin (PF.11 pin for High-Density Value line),
-the conversion of the first regular channel (ADC channel4) is done and its converted 
-value is transferred by DMA to ADC_RegularConvertedValueTab table. On the following edge 
-detection, the second regular channel (ADC channel14) is automatically converted and 
-its converted value is stored by DMA in the same table. The number of transmitted data 
-by DMA, in this example is limited to 64 data.
-
-The procedure is repeated for both regular channels on each EXTI11 event.
-ADC1 is configured to start injected group channel conversion on EXTI15 event.
-On detection of the first rising edge on PE.15 pin all selected injected channels, which
-are two in this example (ADC channel11 and channel12), are converted and an interrupt 
-is generated on JEOC flag rising at the end of all injected channels conversion. 
-Both injected channels converted results are stored in ADC_InjectedConvertedValueTab 
-table inside the interrupt routine.
-The procedure is repeated for injected channels on each EXTI15 event.
-The ADC1 clock is set to 12 MHz on Value line devices and to 14MHz on other 
-devices.
-
-@par Directory contents 
-
-  - ADC/ExtLinesTrigger/stm32f10x_conf.h     Library Configuration file
-  - ADC/ExtLinesTrigger/stm32f10x_it.c       Interrupt handlers
-  - ADC/ExtLinesTrigger/stm32f10x_it.h       Interrupt handlers header file
-  - ADC/ExtLinesTrigger/system_stm32f10x.c   STM32F10x system source file  
-  - ADC/ExtLinesTrigger/main.c               Main program
-
-@par Hardware and Software environment 
-
-  - This example runs on STM32F10x Connectivity line, High-Density, Medium-Density, 
-    XL-Density, Medium-Density Value line, Low-Density and Low-Density Value line Devices.
-  
-  - This example has been tested with STMicroelectronics STM32100B-EVAL (Medium-Density
-    Value line), STM3210C-EVAL (Connectivity line), STM3210E-EVAL (High-Density and
-    XL-Density) and STM3210B-EVAL (Medium-Density) evaluation boards and can be easily
-    tailored to any other supported device and development board.
-
-  - STM32100B-EVAL Set-up
-    - Connect a known voltage, between 0-3.3V, to ADC Channel14 mapped on pin 
-      PC.04 (potentiometer RV2), ADC Channel4 mapped on pin PA.04, ADC Channel11 
-      mapped on pin PC.01 and ADC Channel12 mapped on pin PC.02.
-    - Connect a push-button to pin PE.11 (EXTI Line11) and another push-button 
-      to pin PE.15 (EXTI Line15).
-    @note Make shure that jumper JP3 is open.
-    
-  - STM32100E-EVAL Set-up 
-    - Connect a known voltage, between 0-3.3V, to ADC Channel14 mapped on pin 
-      PC.04 (potentiometer RV1), ADC Channel4 mapped on pin PA.04, ADC Channel11 
-      mapped on pin PC.01 and ADC Channel12 mapped on pin PC.02.
-    - Connect a push-button to pin PF.11 (EXTI Line11) and another push-button 
-      to pin PE.15 (EXTI Line15).
-
-  - STM3210C-EVAL Set-up 
-    - Connect a known voltage, between 0-3.3V, to ADC Channel14 mapped on pin 
-      PC.04 (potentiometer RV1), ADC Channel4 mapped on pin PA.04, ADC Channel11 
-      mapped on pin PC.01 and ADC Channel12 mapped on pin PC.02.
-    - Connect a push-button to pin PE.11 (EXTI Line11) and another push-button 
-      to pin PE.15 (EXTI Line15).
-
-  - STM3210E-EVAL Set-up 
-    - Connect a known voltage, between 0-3.3V, to ADC Channel14 mapped on pin 
-      PC.04 (potentiometer RV1), ADC Channel4 mapped on pin PA.04, ADC Channel11 
-      mapped on pin PC.01 and ADC Channel12 mapped on pin PC.02.
-    - Connect a push-button to pin PE.11 (EXTI Line11) and another push-button 
-      to pin PE.15 (EXTI Line15).
-
-  - STM3210B-EVAL Set-up 
-    - Connect a known voltage, between 0-3.3V, to ADC Channel14 mapped on pin 
-      PC.04 (potentiometer RV1), ADC Channel4 mapped on pin PA.04, ADC Channel11 
-      mapped on pin PC.01 and ADC Channel12 mapped on pin PC.02.
-    - Connect a push-button to pin PE.11 (EXTI Line11) and another push-button 
-      to pin PE.15 (EXTI Line15).              
-   
-@par How to use it ? 
-
-In order to make the program work, you must do the following :
- - Copy all source files from this example folder to the template folder under
-   Project\STM32F10x_StdPeriph_Template
- - Open your preferred toolchain 
- - Rebuild all files and load your image into target memory
- - Run the example 
-
-@note
- - Low-density Value line devices are STM32F100xx microcontrollers where the 
-   Flash memory density ranges between 16 and 32 Kbytes.
- - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
-   microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
- - Medium-density Value line devices are STM32F100xx microcontrollers where
-   the Flash memory density ranges between 64 and 128 Kbytes.  
- - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
-   microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
- - High-density Value line devices are STM32F100xx microcontrollers where
-   the Flash memory density ranges between 256 and 512 Kbytes.  
- - High-density devices are STM32F101xx and STM32F103xx microcontrollers where
-   the Flash memory density ranges between 256 and 512 Kbytes.
- - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
-   the Flash memory density ranges between 512 and 1024 Kbytes.
- - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
-    
- * <h3><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h3>
- */
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ExtLinesTrigger/stm32f10x_conf.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ExtLinesTrigger/stm32f10x_conf.h
deleted file mode 100644
index fc282f0..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ExtLinesTrigger/stm32f10x_conf.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    ADC/ExtLinesTrigger/stm32f10x_conf.h 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Library configuration file.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_CONF_H
-#define __STM32F10x_CONF_H
-
-/* Includes ------------------------------------------------------------------*/
-/* Uncomment/Comment the line below to enable/disable peripheral header file inclusion */
-#include "stm32f10x_adc.h"
-#include "stm32f10x_bkp.h"
-#include "stm32f10x_can.h"
-#include "stm32f10x_cec.h"
-#include "stm32f10x_crc.h"
-#include "stm32f10x_dac.h"
-#include "stm32f10x_dbgmcu.h"
-#include "stm32f10x_dma.h"
-#include "stm32f10x_exti.h"
-#include "stm32f10x_flash.h"
-#include "stm32f10x_fsmc.h"
-#include "stm32f10x_gpio.h"
-#include "stm32f10x_i2c.h"
-#include "stm32f10x_iwdg.h"
-#include "stm32f10x_pwr.h"
-#include "stm32f10x_rcc.h"
-#include "stm32f10x_rtc.h"
-#include "stm32f10x_sdio.h"
-#include "stm32f10x_spi.h"
-#include "stm32f10x_tim.h"
-#include "stm32f10x_usart.h"
-#include "stm32f10x_wwdg.h"
-#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Uncomment the line below to expanse the "assert_param" macro in the 
-   Standard Peripheral Library drivers code */
-/* #define USE_FULL_ASSERT    1 */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function which reports 
-  *         the name of the source file and the source line number of the call 
-  *         that failed. If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0)
-#endif /* USE_FULL_ASSERT */
-
-#endif /* __STM32F10x_CONF_H */
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ExtLinesTrigger/stm32f10x_it.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ExtLinesTrigger/stm32f10x_it.c
deleted file mode 100644
index fa7bccc..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ExtLinesTrigger/stm32f10x_it.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    ADC/ExtLinesTrigger/stm32f10x_it.c 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Main Interrupt Service Routines.
-  *          This file provides template for all exceptions handler and peripherals
-  *          interrupt service routine.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_it.h"
-
-/** @addtogroup STM32F10x_StdPeriph_Examples
-  * @{
-  */
-
-/** @addtogroup ADC_ExtLinesTrigger
-  * @{
-  */ 
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-extern __IO uint16_t ADC_InjectedConvertedValueTab[32];
-uint32_t Index = 0;
-
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/******************************************************************************/
-/*            Cortex-M3 Processor Exceptions Handlers                         */
-/******************************************************************************/
-
-/**
-  * @brief  This function handles NMI exception.
-  * @param  None
-  * @retval None
-  */
-void NMI_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Hard Fault exception.
-  * @param  None
-  * @retval None
-  */
-void HardFault_Handler(void)
-{
-  /* Go to infinite loop when Hard Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Memory Manage exception.
-  * @param  None
-  * @retval None
-  */
-void MemManage_Handler(void)
-{
-  /* Go to infinite loop when Memory Manage exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Bus Fault exception.
-  * @param  None
-  * @retval None
-  */
-void BusFault_Handler(void)
-{
-  /* Go to infinite loop when Bus Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Usage Fault exception.
-  * @param  None
-  * @retval None
-  */
-void UsageFault_Handler(void)
-{
-  /* Go to infinite loop when Usage Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles SVCall exception.
-  * @param  None
-  * @retval None
-  */
-void SVC_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Debug Monitor exception.
-  * @param  None
-  * @retval None
-  */
-void DebugMon_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles PendSV_Handler exception.
-  * @param  None
-  * @retval None
-  */
-void PendSV_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles SysTick Handler.
-  * @param  None
-  * @retval None
-  */
-void SysTick_Handler(void)
-{
-}
-
-/******************************************************************************/
-/*            STM32F10x Peripherals Interrupt Handlers                        */
-/******************************************************************************/
-
-/**
-  * @brief  This function handles ADC1 and ADC2 global interrupts requests.
-  * @param  None
-  * @retval None
-  */
-#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
-void ADC1_IRQHandler(void)
-#else
-void ADC1_2_IRQHandler(void)
-#endif
-{
-  /* Clear ADC1 JEOC pending interrupt bit */
-  ADC_ClearITPendingBit(ADC1, ADC_IT_JEOC);
-  
-  /* Get injected channel11 and channel12 converted value */
-  ADC_InjectedConvertedValueTab[Index++] = ADC_GetInjectedConversionValue(ADC1, ADC_InjectedChannel_1);
-  ADC_InjectedConvertedValueTab[Index++] = ADC_GetInjectedConversionValue(ADC1, ADC_InjectedChannel_2);
-  
-  if (Index == 32)
-  {
-    Index = 0;
-  }
-}
-
-/******************************************************************************/
-/*                 STM32F10x Peripherals Interrupt Handlers                   */
-/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
-/*  available peripheral interrupt handler's name please refer to the startup */
-/*  file (startup_stm32f10x_xx.s).                                            */
-/******************************************************************************/
-
-/**
-  * @brief  This function handles PPP interrupt request.
-  * @param  None
-  * @retval None
-  */
-/*void PPP_IRQHandler(void)
-{
-}*/
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ExtLinesTrigger/stm32f10x_it.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ExtLinesTrigger/stm32f10x_it.h
deleted file mode 100644
index 2a0c5b1..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ExtLinesTrigger/stm32f10x_it.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    ADC/ExtLinesTrigger/stm32f10x_it.h 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   This file contains the headers of the interrupt handlers.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_IT_H
-#define __STM32F10x_IT_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-void NMI_Handler(void);
-void HardFault_Handler(void);
-void MemManage_Handler(void);
-void BusFault_Handler(void);
-void UsageFault_Handler(void);
-void SVC_Handler(void);
-void DebugMon_Handler(void);
-void PendSV_Handler(void);
-void SysTick_Handler(void);
-#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL)
-void ADC1_IRQHandler(void);
-#else
-void ADC1_2_IRQHandler(void);
-#endif
-					 
-#endif /* __STM32F10x_IT_H */
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ExtLinesTrigger/system_stm32f10x.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ExtLinesTrigger/system_stm32f10x.c
deleted file mode 100644
index 7770570..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/ExtLinesTrigger/system_stm32f10x.c
+++ /dev/null
@@ -1,1094 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    ADC/ExtLinesTrigger/system_stm32f10x.c
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
-  * 
-  * 1.  This file provides two functions and one global variable to be called from 
-  *     user application:
-  *      - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
-  *                      factors, AHB/APBx prescalers and Flash settings). 
-  *                      This function is called at startup just after reset and 
-  *                      before branch to main program. This call is made inside
-  *                      the "startup_stm32f10x_xx.s" file.
-  *
-  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
-  *                                  by the user application to setup the SysTick 
-  *                                  timer or configure other parameters.
-  *                                     
-  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
-  *                                 be called whenever the core clock is changed
-  *                                 during program execution.
-  *
-  * 2. After each device reset the HSI (8 MHz) is used as system clock source.
-  *    Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to
-  *    configure the system clock before to branch to main program.
-  *
-  * 3. If the system clock source selected by user fails to startup, the SystemInit()
-  *    function will do nothing and HSI still used as system clock source. User can 
-  *    add some code to deal with this issue inside the SetSysClock() function.
-  *
-  * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on
-  *    the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file. 
-  *    When HSE is used as system clock source, directly or through PLL, and you
-  *    are using different crystal you have to adapt the HSE value to your own
-  *    configuration.
-  *        
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */
-
-/** @addtogroup CMSIS
-  * @{
-  */
-
-/** @addtogroup stm32f10x_system
-  * @{
-  */  
-  
-/** @addtogroup STM32F10x_System_Private_Includes
-  * @{
-  */
-
-#include "stm32f10x.h"
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_TypesDefinitions
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Defines
-  * @{
-  */
-
-/*!< Uncomment the line corresponding to the desired System clock (SYSCLK)
-   frequency (after reset the HSI is used as SYSCLK source)
-   
-   IMPORTANT NOTE:
-   ============== 
-   1. After each device reset the HSI is used as System clock source.
-
-   2. Please make sure that the selected System clock doesn't exceed your device's
-      maximum frequency.
-      
-   3. If none of the define below is enabled, the HSI is used as System clock
-    source.
-
-   4. The System clock configuration functions provided within this file assume that:
-        - For Low, Medium and High density Value line devices an external 8MHz 
-          crystal is used to drive the System clock.
-        - For Low, Medium and High density devices an external 8MHz crystal is
-          used to drive the System clock.
-        - For Connectivity line devices an external 25MHz crystal is used to drive
-          the System clock.
-     If you are using different crystal you have to adapt those functions accordingly.
-    */
-    
-#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-/* #define SYSCLK_FREQ_HSE    HSE_VALUE */
- #define SYSCLK_FREQ_24MHz  24000000
-#else
-/* #define SYSCLK_FREQ_HSE    HSE_VALUE */
-/* #define SYSCLK_FREQ_24MHz  24000000 */ 
-/* #define SYSCLK_FREQ_36MHz  36000000 */
-/* #define SYSCLK_FREQ_48MHz  48000000 */
- #define SYSCLK_FREQ_56MHz  56000000
-/* #define SYSCLK_FREQ_72MHz  72000000 */
-#endif
-
-/*!< Uncomment the following line if you need to use external SRAM mounted
-     on STM3210E-EVAL board (STM32 High density and XL-density devices) or on 
-     STM32100E-EVAL board (STM32 High-density value line devices) as data memory */ 
-#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
-/* #define DATA_IN_ExtSRAM */
-#endif
-
-/*!< Uncomment the following line if you need to relocate your vector Table in
-     Internal SRAM. */ 
-/* #define VECT_TAB_SRAM */
-#define VECT_TAB_OFFSET  0x0 /*!< Vector Table base offset field. 
-                                  This value must be a multiple of 0x200. */
-
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Macros
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Variables
-  * @{
-  */
-
-/*******************************************************************************
-*  Clock Definitions
-*******************************************************************************/
-#ifdef SYSCLK_FREQ_HSE
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_HSE;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_24MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_24MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_36MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_36MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_48MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_48MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_56MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_56MHz;        /*!< System Clock Frequency (Core Clock) */
-#elif defined SYSCLK_FREQ_72MHz
-  uint32_t SystemCoreClock         = SYSCLK_FREQ_72MHz;        /*!< System Clock Frequency (Core Clock) */
-#else /*!< HSI Selected as System Clock source */
-  uint32_t SystemCoreClock         = HSI_VALUE;        /*!< System Clock Frequency (Core Clock) */
-#endif
-
-__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_FunctionPrototypes
-  * @{
-  */
-
-static void SetSysClock(void);
-
-#ifdef SYSCLK_FREQ_HSE
-  static void SetSysClockToHSE(void);
-#elif defined SYSCLK_FREQ_24MHz
-  static void SetSysClockTo24(void);
-#elif defined SYSCLK_FREQ_36MHz
-  static void SetSysClockTo36(void);
-#elif defined SYSCLK_FREQ_48MHz
-  static void SetSysClockTo48(void);
-#elif defined SYSCLK_FREQ_56MHz
-  static void SetSysClockTo56(void);  
-#elif defined SYSCLK_FREQ_72MHz
-  static void SetSysClockTo72(void);
-#endif
-
-#ifdef DATA_IN_ExtSRAM
-  static void SystemInit_ExtMemCtl(void); 
-#endif /* DATA_IN_ExtSRAM */
-
-/**
-  * @}
-  */
-
-/** @addtogroup STM32F10x_System_Private_Functions
-  * @{
-  */
-
-/**
-  * @brief  Setup the microcontroller system
-  *         Initialize the Embedded Flash Interface, the PLL and update the 
-  *         SystemCoreClock variable.
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-void SystemInit (void)
-{
-  /* Reset the RCC clock configuration to the default reset state(for debug purpose) */
-  /* Set HSION bit */
-  RCC->CR |= (uint32_t)0x00000001;
-
-  /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
-#ifndef STM32F10X_CL
-  RCC->CFGR &= (uint32_t)0xF8FF0000;
-#else
-  RCC->CFGR &= (uint32_t)0xF0FF0000;
-#endif /* STM32F10X_CL */   
-  
-  /* Reset HSEON, CSSON and PLLON bits */
-  RCC->CR &= (uint32_t)0xFEF6FFFF;
-
-  /* Reset HSEBYP bit */
-  RCC->CR &= (uint32_t)0xFFFBFFFF;
-
-  /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
-  RCC->CFGR &= (uint32_t)0xFF80FFFF;
-
-#ifdef STM32F10X_CL
-  /* Reset PLL2ON and PLL3ON bits */
-  RCC->CR &= (uint32_t)0xEBFFFFFF;
-
-  /* Disable all interrupts and clear pending bits  */
-  RCC->CIR = 0x00FF0000;
-
-  /* Reset CFGR2 register */
-  RCC->CFGR2 = 0x00000000;
-#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-  /* Disable all interrupts and clear pending bits  */
-  RCC->CIR = 0x009F0000;
-
-  /* Reset CFGR2 register */
-  RCC->CFGR2 = 0x00000000;      
-#else
-  /* Disable all interrupts and clear pending bits  */
-  RCC->CIR = 0x009F0000;
-#endif /* STM32F10X_CL */
-    
-#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
-  #ifdef DATA_IN_ExtSRAM
-    SystemInit_ExtMemCtl(); 
-  #endif /* DATA_IN_ExtSRAM */
-#endif 
-
-  /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */
-  /* Configure the Flash Latency cycles and enable prefetch buffer */
-  SetSysClock();
-
-#ifdef VECT_TAB_SRAM
-  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
-#else
-  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
-#endif 
-}
-
-/**
-  * @brief  Update SystemCoreClock variable according to Clock Register Values.
-  *         The SystemCoreClock variable contains the core clock (HCLK), it can
-  *         be used by the user application to setup the SysTick timer or configure
-  *         other parameters.
-  *           
-  * @note   Each time the core clock (HCLK) changes, this function must be called
-  *         to update SystemCoreClock variable value. Otherwise, any configuration
-  *         based on this variable will be incorrect.         
-  *     
-  * @note   - The system frequency computed by this function is not the real 
-  *           frequency in the chip. It is calculated based on the predefined 
-  *           constant and the selected clock source:
-  *             
-  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
-  *                                              
-  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
-  *                          
-  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
-  *             or HSI_VALUE(*) multiplied by the PLL factors.
-  *         
-  *         (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
-  *             8 MHz) but the real value may vary depending on the variations
-  *             in voltage and temperature.   
-  *    
-  *         (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
-  *              8 MHz or 25 MHz, depedning on the product used), user has to ensure
-  *              that HSE_VALUE is same as the real frequency of the crystal used.
-  *              Otherwise, this function may have wrong result.
-  *                
-  *         - The result of this function could be not correct when using fractional
-  *           value for HSE crystal.
-  * @param  None
-  * @retval None
-  */
-void SystemCoreClockUpdate (void)
-{
-  uint32_t tmp = 0, pllmull = 0, pllsource = 0;
-
-#ifdef  STM32F10X_CL
-  uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0;
-#endif /* STM32F10X_CL */
-
-#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-  uint32_t prediv1factor = 0;
-#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */
-    
-  /* Get SYSCLK source -------------------------------------------------------*/
-  tmp = RCC->CFGR & RCC_CFGR_SWS;
-  
-  switch (tmp)
-  {
-    case 0x00:  /* HSI used as system clock */
-      SystemCoreClock = HSI_VALUE;
-      break;
-    case 0x04:  /* HSE used as system clock */
-      SystemCoreClock = HSE_VALUE;
-      break;
-    case 0x08:  /* PLL used as system clock */
-
-      /* Get PLL clock source and multiplication factor ----------------------*/
-      pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
-      pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
-      
-#ifndef STM32F10X_CL      
-      pllmull = ( pllmull >> 18) + 2;
-      
-      if (pllsource == 0x00)
-      {
-        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
-        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
-      }
-      else
-      {
- #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
-       prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
-       /* HSE oscillator clock selected as PREDIV1 clock entry */
-       SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; 
- #else
-        /* HSE selected as PLL clock entry */
-        if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
-        {/* HSE oscillator clock divided by 2 */
-          SystemCoreClock = (HSE_VALUE >> 1) * pllmull;
-        }
-        else
-        {
-          SystemCoreClock = HSE_VALUE * pllmull;
-        }
- #endif
-      }
-#else
-      pllmull = pllmull >> 18;
-      
-      if (pllmull != 0x0D)
-      {
-         pllmull += 2;
-      }
-      else
-      { /* PLL multiplication factor = PLL input clock * 6.5 */
-        pllmull = 13 / 2; 
-      }
-            
-      if (pllsource == 0x00)
-      {
-        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
-        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
-      }
-      else
-      {/* PREDIV1 selected as PLL clock entry */
-        
-        /* Get PREDIV1 clock source and division factor */
-        prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
-        prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
-        
-        if (prediv1source == 0)
-        { 
-          /* HSE oscillator clock selected as PREDIV1 clock entry */
-          SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;          
-        }
-        else
-        {/* PLL2 clock selected as PREDIV1 clock entry */
-          
-          /* Get PREDIV2 division factor and PLL2 multiplication factor */
-          prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1;
-          pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; 
-          SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;                         
-        }
-      }
-#endif /* STM32F10X_CL */ 
-      break;
-
-    default:
-      SystemCoreClock = HSI_VALUE;
-      break;
-  }
-  
-  /* Compute HCLK clock frequency ----------------*/
-  /* Get HCLK prescaler */
-  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
-  /* HCLK clock frequency */
-  SystemCoreClock >>= tmp;  
-}
-
-/**
-  * @brief  Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClock(void)
-{
-#ifdef SYSCLK_FREQ_HSE
-  SetSysClockToHSE();
-#elif defined SYSCLK_FREQ_24MHz
-  SetSysClockTo24();
-#elif defined SYSCLK_FREQ_36MHz
-  SetSysClockTo36();
-#elif defined SYSCLK_FREQ_48MHz
-  SetSysClockTo48();
-#elif defined SYSCLK_FREQ_56MHz
-  SetSysClockTo56();  
-#elif defined SYSCLK_FREQ_72MHz
-  SetSysClockTo72();
-#endif
- 
- /* If none of the define above is enabled, the HSI is used as System clock
-    source (default after reset) */ 
-}
-
-/**
-  * @brief  Setup the external memory controller. Called in startup_stm32f10x.s 
-  *          before jump to __main
-  * @param  None
-  * @retval None
-  */ 
-#ifdef DATA_IN_ExtSRAM
-/**
-  * @brief  Setup the external memory controller. 
-  *         Called in startup_stm32f10x_xx.s/.c before jump to main.
-  * 	      This function configures the external SRAM mounted on STM3210E-EVAL
-  *         board (STM32 High density devices). This SRAM will be used as program
-  *         data memory (including heap and stack).
-  * @param  None
-  * @retval None
-  */ 
-void SystemInit_ExtMemCtl(void) 
-{
-/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is 
-  required, then adjust the Register Addresses */
-
-  /* Enable FSMC clock */
-  RCC->AHBENR = 0x00000114;
-  
-  /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */  
-  RCC->APB2ENR = 0x000001E0;
-  
-/* ---------------  SRAM Data lines, NOE and NWE configuration ---------------*/
-/*----------------  SRAM Address lines configuration -------------------------*/
-/*----------------  NOE and NWE configuration --------------------------------*/  
-/*----------------  NE3 configuration ----------------------------------------*/
-/*----------------  NBL0, NBL1 configuration ---------------------------------*/
-  
-  GPIOD->CRL = 0x44BB44BB;  
-  GPIOD->CRH = 0xBBBBBBBB;
-
-  GPIOE->CRL = 0xB44444BB;  
-  GPIOE->CRH = 0xBBBBBBBB;
-
-  GPIOF->CRL = 0x44BBBBBB;  
-  GPIOF->CRH = 0xBBBB4444;
-
-  GPIOG->CRL = 0x44BBBBBB;  
-  GPIOG->CRH = 0x44444B44;
-   
-/*----------------  FSMC Configuration ---------------------------------------*/  
-/*----------------  Enable FSMC Bank1_SRAM Bank ------------------------------*/
-  
-  FSMC_Bank1->BTCR[4] = 0x00001011;
-  FSMC_Bank1->BTCR[5] = 0x00000200;
-}
-#endif /* DATA_IN_ExtSRAM */
-
-#ifdef SYSCLK_FREQ_HSE
-/**
-  * @brief  Selects HSE as System clock source and configure HCLK, PCLK2
-  *          and PCLK1 prescalers.
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockToHSE(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-
-#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 0 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-
-#ifndef STM32F10X_CL
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
-#else
-    if (HSE_VALUE <= 24000000)
-	{
-      FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
-	}
-	else
-	{
-      FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
-	}
-#endif /* STM32F10X_CL */
-#endif
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
-    
-    /* Select HSE as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE;    
-
-    /* Wait till HSE is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  }  
-}
-#elif defined SYSCLK_FREQ_24MHz
-/**
-  * @brief  Sets System clock frequency to 24MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers.
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo24(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL 
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 0 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;    
-#endif
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
-    
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL6); 
-
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */       
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }   
-#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
-    /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6);
-#else    
-    /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-#elif defined SYSCLK_FREQ_36MHz
-/**
-  * @brief  Sets System clock frequency to 36MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo36(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 1 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
-    
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    
-    /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL9); 
-
-	/*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-#else    
-    /*  PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-#elif defined SYSCLK_FREQ_48MHz
-/**
-  * @brief  Sets System clock frequency to 48MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo48(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 1 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
-    
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-   
-    /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL6); 
-#else    
-    /*  PLL configuration: PLLCLK = HSE * 6 = 48 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-
-#elif defined SYSCLK_FREQ_56MHz
-/**
-  * @brief  Sets System clock frequency to 56MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo56(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/   
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 2 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
-
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-   
-    /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL7); 
-#else     
-    /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7);
-
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  } 
-}
-
-#elif defined SYSCLK_FREQ_72MHz
-/**
-  * @brief  Sets System clock frequency to 72MHz and configure HCLK, PCLK2 
-  *          and PCLK1 prescalers. 
-  * @note   This function should be used only after reset.
-  * @param  None
-  * @retval None
-  */
-static void SetSysClockTo72(void)
-{
-  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
-  
-  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
-  /* Enable HSE */    
-  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
- 
-  /* Wait till HSE is ready and if Time out is reached exit */
-  do
-  {
-    HSEStatus = RCC->CR & RCC_CR_HSERDY;
-    StartUpCounter++;  
-  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
-
-  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
-  {
-    HSEStatus = (uint32_t)0x01;
-  }
-  else
-  {
-    HSEStatus = (uint32_t)0x00;
-  }  
-
-  if (HSEStatus == (uint32_t)0x01)
-  {
-    /* Enable Prefetch Buffer */
-    FLASH->ACR |= FLASH_ACR_PRFTBE;
-
-    /* Flash 2 wait state */
-    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
-    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
-
- 
-    /* HCLK = SYSCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
-      
-    /* PCLK2 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
-    
-    /* PCLK1 = HCLK */
-    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
-
-#ifdef STM32F10X_CL
-    /* Configure PLLs ------------------------------------------------------*/
-    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
-    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
-        
-    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
-                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
-    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
-                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
-  
-    /* Enable PLL2 */
-    RCC->CR |= RCC_CR_PLL2ON;
-    /* Wait till PLL2 is ready */
-    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
-    {
-    }
-    
-   
-    /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */ 
-    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
-                            RCC_CFGR_PLLMULL9); 
-#else    
-    /*  PLL configuration: PLLCLK = HSE * 9 = 72 MHz */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE |
-                                        RCC_CFGR_PLLMULL));
-    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9);
-#endif /* STM32F10X_CL */
-
-    /* Enable PLL */
-    RCC->CR |= RCC_CR_PLLON;
-
-    /* Wait till PLL is ready */
-    while((RCC->CR & RCC_CR_PLLRDY) == 0)
-    {
-    }
-    
-    /* Select PLL as system clock source */
-    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
-    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
-
-    /* Wait till PLL is used as system clock source */
-    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
-    {
-    }
-  }
-  else
-  { /* If HSE fails to start-up, the application will have wrong clock 
-         configuration. User can add here some code to deal with this error */
-  }
-}
-#endif
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-  
-/**
-  * @}
-  */    
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/RegSimul_DualMode/main.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/RegSimul_DualMode/main.c
deleted file mode 100644
index c6d474d..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/RegSimul_DualMode/main.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    ADC/RegSimul_DualMode/main.c 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Main program body
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x.h"
-
-/** @addtogroup STM32F10x_StdPeriph_Examples
-  * @{
-  */
-
-/** @addtogroup ADC_RegSimul_DualMode
-  * @{
-  */ 
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-#define ADC1_DR_Address    ((uint32_t)0x4001244C)
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-ADC_InitTypeDef ADC_InitStructure;
-DMA_InitTypeDef DMA_InitStructure;
-__IO uint32_t ADC_DualConvertedValueTab[16];
-    
-/* Private function prototypes -----------------------------------------------*/
-void RCC_Configuration(void);
-void GPIO_Configuration(void);
-  
-/* Private functions ---------------------------------------------------------*/
-
-/**
-  * @brief   Main program
-  * @param  None
-  * @retval None
-  */
-int main(void)
-{
-  /*!< At this stage the microcontroller clock setting is already configured, 
-       this is done through SystemInit() function which is called from startup
-       file (startup_stm32f10x_xx.s) before to branch to application main.
-       To reconfigure the default setting of SystemInit() function, refer to
-       system_stm32f10x.c file
-     */     
-       
-  /* System clocks configuration ---------------------------------------------*/
-  RCC_Configuration();
-
-  /* GPIO configuration ------------------------------------------------------*/
-  GPIO_Configuration();
-
-  /* DMA1 channel1 configuration ----------------------------------------------*/
-  DMA_DeInit(DMA1_Channel1);
-  DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)ADC1_DR_Address;
-  DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)ADC_DualConvertedValueTab;
-  DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC;
-  DMA_InitStructure.DMA_BufferSize = 16;
-  DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
-  DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
-  DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Word;
-  DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Word;
-  DMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
-  DMA_InitStructure.DMA_Priority = DMA_Priority_High;
-  DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
-  DMA_Init(DMA1_Channel1, &DMA_InitStructure);
-  /* Enable DMA1 Channel1 */
-  DMA_Cmd(DMA1_Channel1, ENABLE);
-
-  /* ADC1 configuration ------------------------------------------------------*/
-  ADC_InitStructure.ADC_Mode = ADC_Mode_RegSimult;
-  ADC_InitStructure.ADC_ScanConvMode = ENABLE;
-  ADC_InitStructure.ADC_ContinuousConvMode = ENABLE;
-  ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;
-  ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
-  ADC_InitStructure.ADC_NbrOfChannel = 2;
-  ADC_Init(ADC1, &ADC_InitStructure);
-  /* ADC1 regular channels configuration */ 
-  ADC_RegularChannelConfig(ADC1, ADC_Channel_14, 1, ADC_SampleTime_239Cycles5);    
-  ADC_RegularChannelConfig(ADC1, ADC_Channel_17, 2, ADC_SampleTime_239Cycles5);
-  /* Enable ADC1 DMA */
-  ADC_DMACmd(ADC1, ENABLE);
-
-  /* ADC2 configuration ------------------------------------------------------*/
-  ADC_InitStructure.ADC_Mode = ADC_Mode_RegSimult;
-  ADC_InitStructure.ADC_ScanConvMode = ENABLE;
-  ADC_InitStructure.ADC_ContinuousConvMode = ENABLE;
-  ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;
-  ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
-  ADC_InitStructure.ADC_NbrOfChannel = 2;
-  ADC_Init(ADC2, &ADC_InitStructure);
-  /* ADC2 regular channels configuration */ 
-  ADC_RegularChannelConfig(ADC2, ADC_Channel_11, 1, ADC_SampleTime_239Cycles5);
-  ADC_RegularChannelConfig(ADC2, ADC_Channel_12, 2, ADC_SampleTime_239Cycles5);
-  /* Enable ADC2 external trigger conversion */
-  ADC_ExternalTrigConvCmd(ADC2, ENABLE);
-
-  /* Enable ADC1 */
-  ADC_Cmd(ADC1, ENABLE);
-  /* Enable Vrefint channel17 */
-  ADC_TempSensorVrefintCmd(ENABLE);
-
-  /* Enable ADC1 reset calibration register */   
-  ADC_ResetCalibration(ADC1);
-  /* Check the end of ADC1 reset calibration register */
-  while(ADC_GetResetCalibrationStatus(ADC1));
-
-  /* Start ADC1 calibration */
-  ADC_StartCalibration(ADC1);
-  /* Check the end of ADC1 calibration */
-  while(ADC_GetCalibrationStatus(ADC1));
-
-  /* Enable ADC2 */
-  ADC_Cmd(ADC2, ENABLE);
-
-  /* Enable ADC2 reset calibration register */   
-  ADC_ResetCalibration(ADC2);
-  /* Check the end of ADC2 reset calibration register */
-  while(ADC_GetResetCalibrationStatus(ADC2));
-
-  /* Start ADC2 calibration */
-  ADC_StartCalibration(ADC2);
-  /* Check the end of ADC2 calibration */
-  while(ADC_GetCalibrationStatus(ADC2));
-
-  /* Start ADC1 Software Conversion */ 
-  ADC_SoftwareStartConvCmd(ADC1, ENABLE);
-
-  /* Test on DMA1 channel1 transfer complete flag */
-  while(!DMA_GetFlagStatus(DMA1_FLAG_TC1));
-  /* Clear DMA1 channel1 transfer complete flag */
-  DMA_ClearFlag(DMA1_FLAG_TC1);
-
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  Configures the different system clocks.
-  * @param  None
-  * @retval None
-  */
-void RCC_Configuration(void)
-{
-  /* ADCCLK = PCLK2/4 */
-  RCC_ADCCLKConfig(RCC_PCLK2_Div4);
-  /* Enable peripheral clocks ------------------------------------------------*/
-  /* Enable DMA1 clock */
-  RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1, ENABLE);
-
-  /* Enable ADC1, ADC2 and GPIOC clock */
-  RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1 | RCC_APB2Periph_ADC2 |
-                         RCC_APB2Periph_GPIOC, ENABLE);
-}
-
-/**
-  * @brief  Configures the different GPIO ports.
-  * @param  None
-  * @retval None
-  */
-void GPIO_Configuration(void)
-{
-  GPIO_InitTypeDef GPIO_InitStructure;
-
-  /* Configure PC.01, PC.02 and PC.04 (ADC Channel11, Channel12 and Channel14)
-    as analog input ----------------------------------------------------------*/
-  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_4;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
-  GPIO_Init(GPIOC, &GPIO_InitStructure);
-}
-
-#ifdef  USE_FULL_ASSERT
-
-/**
-  * @brief  Reports the name of the source file and the source line number
-  *         where the assert_param error has occurred.
-  * @param  file: pointer to the source file name
-  * @param  line: assert_param error line source number
-  * @retval None
-  */
-void assert_failed(uint8_t* file, uint32_t line)
-{ 
-  /* User can add his own implementation to report the file name and line number,
-     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
-
-  /* Infinite loop */
-  while (1)
-  {
-  }
-}
-
-#endif
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/RegSimul_DualMode/stm32f10x_conf.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/RegSimul_DualMode/stm32f10x_conf.h
deleted file mode 100644
index 7239750..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/RegSimul_DualMode/stm32f10x_conf.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    ADC/RegSimul_DualMode/stm32f10x_conf.h 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Library configuration file.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_CONF_H
-#define __STM32F10x_CONF_H
-
-/* Includes ------------------------------------------------------------------*/
-/* Uncomment/Comment the line below to enable/disable peripheral header file inclusion */
-#include "stm32f10x_adc.h"
-#include "stm32f10x_bkp.h"
-#include "stm32f10x_can.h"
-#include "stm32f10x_cec.h"
-#include "stm32f10x_crc.h"
-#include "stm32f10x_dac.h"
-#include "stm32f10x_dbgmcu.h"
-#include "stm32f10x_dma.h"
-#include "stm32f10x_exti.h"
-#include "stm32f10x_flash.h"
-#include "stm32f10x_fsmc.h"
-#include "stm32f10x_gpio.h"
-#include "stm32f10x_i2c.h"
-#include "stm32f10x_iwdg.h"
-#include "stm32f10x_pwr.h"
-#include "stm32f10x_rcc.h"
-#include "stm32f10x_rtc.h"
-#include "stm32f10x_sdio.h"
-#include "stm32f10x_spi.h"
-#include "stm32f10x_tim.h"
-#include "stm32f10x_usart.h"
-#include "stm32f10x_wwdg.h"
-#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Uncomment the line below to expanse the "assert_param" macro in the 
-   Standard Peripheral Library drivers code */
-/* #define USE_FULL_ASSERT    1 */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function which reports 
-  *         the name of the source file and the source line number of the call 
-  *         that failed. If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0)
-#endif /* USE_FULL_ASSERT */
-
-#endif /* __STM32F10x_CONF_H */
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/RegSimul_DualMode/stm32f10x_it.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/RegSimul_DualMode/stm32f10x_it.c
deleted file mode 100644
index ec6e131..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/RegSimul_DualMode/stm32f10x_it.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    ADC/RegSimul_DualMode/stm32f10x_it.c 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Main Interrupt Service Routines.
-  *          This file provides template for all exceptions handler and peripherals
-  *          interrupt service routine.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_it.h"
-
-/** @addtogroup STM32F10x_StdPeriph_Examples
-  * @{
-  */
-
-/** @addtogroup ADC_RegSimul_DualMode
-  * @{
-  */ 
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/******************************************************************************/
-/*            Cortex-M3 Processor Exceptions Handlers                         */
-/******************************************************************************/
-
-/**
-  * @brief  This function handles NMI exception.
-  * @param  None
-  * @retval None
-  */
-void NMI_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Hard Fault exception.
-  * @param  None
-  * @retval None
-  */
-void HardFault_Handler(void)
-{
-  /* Go to infinite loop when Hard Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Memory Manage exception.
-  * @param  None
-  * @retval None
-  */
-void MemManage_Handler(void)
-{
-  /* Go to infinite loop when Memory Manage exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Bus Fault exception.
-  * @param  None
-  * @retval None
-  */
-void BusFault_Handler(void)
-{
-  /* Go to infinite loop when Bus Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Usage Fault exception.
-  * @param  None
-  * @retval None
-  */
-void UsageFault_Handler(void)
-{
-  /* Go to infinite loop when Usage Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles SVCall exception.
-  * @param  None
-  * @retval None
-  */
-void SVC_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Debug Monitor exception.
-  * @param  None
-  * @retval None
-  */
-void DebugMon_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles PendSV_Handler exception.
-  * @param  None
-  * @retval None
-  */
-void PendSV_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles SysTick Handler.
-  * @param  None
-  * @retval None
-  */
-void SysTick_Handler(void)
-{
-}
-
-/******************************************************************************/
-/*                 STM32F10x Peripherals Interrupt Handlers                   */
-/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
-/*  available peripheral interrupt handler's name please refer to the startup */
-/*  file (startup_stm32f10x_xx.s).                                            */
-/******************************************************************************/
-
-/**
-  * @brief  This function handles PPP interrupt request.
-  * @param  None
-  * @retval None
-  */
-/*void PPP_IRQHandler(void)
-{
-}*/
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/RegSimul_DualMode/stm32f10x_it.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/RegSimul_DualMode/stm32f10x_it.h
deleted file mode 100644
index 9e9b0b8..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/RegSimul_DualMode/stm32f10x_it.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    ADC/RegSimul_DualMode/stm32f10x_it.h 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   This file contains the headers of the interrupt handlers.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_IT_H
-#define __STM32F10x_IT_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-void NMI_Handler(void);
-void HardFault_Handler(void);
-void MemManage_Handler(void);
-void BusFault_Handler(void);
-void UsageFault_Handler(void);
-void SVC_Handler(void);
-void DebugMon_Handler(void);
-void PendSV_Handler(void);
-void SysTick_Handler(void);
-					 
-#endif /* __STM32F10x_IT_H */
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/TIMTrigger_AutoInjection/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/TIMTrigger_AutoInjection/readme.txt
deleted file mode 100644
index ae21baa..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/TIMTrigger_AutoInjection/readme.txt
+++ /dev/null
@@ -1,113 +0,0 @@
-/**
-  @page ADC_TIMTrigger_AutoInjection ADC TIM trigger and auto-injection example
-  
-  @verbatim
-  ******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
-  * @file    ADC/TIMTrigger_AutoInjection/readme.txt 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Description of the ADC TIM trigger and auto-injection example.
-  ******************************************************************************
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  ******************************************************************************
-   @endverbatim
-
-@par Example Description 
-
-This example describes how to convert ADC regular group channels continuously using
-TIM1 external trigger and injected group channels using the auto-injected feature.
-
-ADC1 is configured to convert on each TIM1 capture compare event ADC channel14.
-Each time an end of regular conversion occurs the DMA transfers the converted data 
-from ADC1 DR register to the ADC_RegularConvertedValueTab table. 
-Enabling the auto-injected feature, allows to convert automatically the injected 
-channel ADC channel11 after the end of the regular channel14. An ADC interrupt is 
-generated then by JEOC flag at the end of the injected channel conversion and in 
-the interrupt routine the result is stored in the ADC_InjectedConvertedValueTab table.
-The procedure is repeated 32 times then the TIM1 peripheral is disabled and thus, 
-no conversion will be done neither regular nor injected.
-TIM1 start conversion triggers can be visualized on oscilloscope on PA.08 and at the
-same time the toggle of pin PC.06 which indicates the automatic auto-injection conversion.
-
-The ADC1 clock is set to 12 MHz on Value line devices and to 14MHz on other 
-devices.
-
-@par Directory contents 
-
-  - ADC/TIMTrigger_AutoInjection/stm32f10x_conf.h     Library Configuration file
-  - ADC/TIMTrigger_AutoInjection/stm32f10x_it.c       Interrupt handlers
-  - ADC/TIMTrigger_AutoInjection/stm32f10x_it.h       Interrupt handlers header file
-  - ADC/TIMTrigger_AutoInjection/system_stm32f10x.c   STM32F10x system source file  
-  - ADC/TIMTrigger_AutoInjection/main.c               Main program
-
-@par Hardware and Software environment 
-
-  - This example runs on STM32F10x Connectivity line, High-Density, High-Density Value line,
-    Medium-Density, XL-Density, Medium-Density Value line, Low-Density and Low-Density Value 
-    line Devices.
-  
-  - This example has been tested with STMicroelectronics STM32100E-EVAL(High-Density 
-    Value line) STM32100B-EVAL (Medium-Density Value line), STM3210C-EVAL (Connectivity
-    line), STM3210E-EVAL (High-Density and XL-Density) and STM3210B-EVAL (Medium-Density) 
-    evaluation boards and can be easily tailored to any other supported device and development 
-    board.
-
-  - STM32100E-EVAL Set-up 
-    - Connect a known voltage, between 0-3.3V, to ADC Channel14 mapped on pin 
-      PC.04 (potentiometer RV1) and ADC Channel11 mapped on pin PC.01
-    - Connect PA.08 and PC.06 pins to an oscilloscope
-    
-  - STM32100B-EVAL Set-up
-    - Connect a variable power supply 0-3.3V to ADC Channel14 mapped on pin PC.04
-      (potentiometer RV2) and ADC Channel11 mapped on pin PC.01
-    - Connect PA.08 and PC.06 pins to an oscilloscope
-
-  - STM3210C-EVAL Set-up
-    - Connect a known voltage, between 0-3.3V, to ADC Channel14 mapped on pin 
-      PC.04 (potentiometer RV1) and ADC Channel11 mapped on pin PC.01
-    - Connect PA.08 and PC.06 pins to an oscilloscope
-    
-  - STM3210E-EVAL Set-up 
-    - Connect a known voltage, between 0-3.3V, to ADC Channel14 mapped on pin 
-      PC.04 (potentiometer RV1) and ADC Channel11 mapped on pin PC.01
-    - Connect PA.08 and PC.06 pins to an oscilloscope
-
-  - STM3210B-EVAL Set-up 
-    - Connect a known voltage, between 0-3.3V, to ADC Channel14 mapped on pin 
-      PC.04 (potentiometer RV1) and ADC Channel11 mapped on pin PC.01
-    - Connect PA.08 and PC.06 pins to an oscilloscope        
-      
-@par How to use it ? 
-
-In order to make the program work, you must do the following :
- - Copy all source files from this example folder to the template folder under
-   Project\STM32F10x_StdPeriph_Template
- - Open your preferred toolchain 
- - Rebuild all files and load your image into target memory
- - Run the example 
-
-@note
- - Low-density Value line devices are STM32F100xx microcontrollers where the 
-   Flash memory density ranges between 16 and 32 Kbytes.
- - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
-   microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
- - Medium-density Value line devices are STM32F100xx microcontrollers where
-   the Flash memory density ranges between 64 and 128 Kbytes.  
- - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
-   microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
- - High-density Value line devices are STM32F100xx microcontrollers where
-   the Flash memory density ranges between 256 and 512 Kbytes.  
- - High-density devices are STM32F101xx and STM32F103xx microcontrollers where
-   the Flash memory density ranges between 256 and 512 Kbytes.
- - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
-   the Flash memory density ranges between 512 and 1024 Kbytes.
- - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
- 
- * <h3><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h3>
- */
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/TIMTrigger_AutoInjection/stm32f10x_conf.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/TIMTrigger_AutoInjection/stm32f10x_conf.h
deleted file mode 100644
index 9650010..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/TIMTrigger_AutoInjection/stm32f10x_conf.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    ADC/TIMTrigger_AutoInjection/stm32f10x_conf.h 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Library configuration file.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_CONF_H
-#define __STM32F10x_CONF_H
-
-/* Includes ------------------------------------------------------------------*/
-/* Uncomment/Comment the line below to enable/disable peripheral header file inclusion */
-#include "stm32f10x_adc.h"
-#include "stm32f10x_bkp.h"
-#include "stm32f10x_can.h"
-#include "stm32f10x_cec.h"
-#include "stm32f10x_crc.h"
-#include "stm32f10x_dac.h"
-#include "stm32f10x_dbgmcu.h"
-#include "stm32f10x_dma.h"
-#include "stm32f10x_exti.h"
-#include "stm32f10x_flash.h"
-#include "stm32f10x_fsmc.h"
-#include "stm32f10x_gpio.h"
-#include "stm32f10x_i2c.h"
-#include "stm32f10x_iwdg.h"
-#include "stm32f10x_pwr.h"
-#include "stm32f10x_rcc.h"
-#include "stm32f10x_rtc.h"
-#include "stm32f10x_sdio.h"
-#include "stm32f10x_spi.h"
-#include "stm32f10x_tim.h"
-#include "stm32f10x_usart.h"
-#include "stm32f10x_wwdg.h"
-#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Uncomment the line below to expanse the "assert_param" macro in the 
-   Standard Peripheral Library drivers code */
-/* #define USE_FULL_ASSERT    1 */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function which reports 
-  *         the name of the source file and the source line number of the call 
-  *         that failed. If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0)
-#endif /* USE_FULL_ASSERT */
-
-#endif /* __STM32F10x_CONF_H */
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/TIMTrigger_AutoInjection/stm32f10x_it.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/TIMTrigger_AutoInjection/stm32f10x_it.c
deleted file mode 100644
index 9780049..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/TIMTrigger_AutoInjection/stm32f10x_it.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    ADC/TIMTrigger_AutoInjection/stm32f10x_it.c 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Main Interrupt Service Routines.
-  *          This file provides template for all exceptions handler and peripherals
-  *          interrupt service routine.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_it.h"
-
-/** @addtogroup STM32F10x_StdPeriph_Examples
-  * @{
-  */
-
-/** @addtogroup ADC_TIMTrigger_AutoInjection
-  * @{
-  */ 
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-extern __IO uint16_t ADC_InjectedConvertedValueTab[32];
-__IO uint32_t Index;
-
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/******************************************************************************/
-/*            Cortex-M3 Processor Exceptions Handlers                         */
-/******************************************************************************/
-
-/**
-  * @brief  This function handles NMI exception.
-  * @param  None
-  * @retval None
-  */
-void NMI_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Hard Fault exception.
-  * @param  None
-  * @retval None
-  */
-void HardFault_Handler(void)
-{
-  /* Go to infinite loop when Hard Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Memory Manage exception.
-  * @param  None
-  * @retval None
-  */
-void MemManage_Handler(void)
-{
-  /* Go to infinite loop when Memory Manage exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Bus Fault exception.
-  * @param  None
-  * @retval None
-  */
-void BusFault_Handler(void)
-{
-  /* Go to infinite loop when Bus Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Usage Fault exception.
-  * @param  None
-  * @retval None
-  */
-void UsageFault_Handler(void)
-{
-  /* Go to infinite loop when Usage Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles SVCall exception.
-  * @param  None
-  * @retval None
-  */
-void SVC_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Debug Monitor exception.
-  * @param  None
-  * @retval None
-  */
-void DebugMon_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles PendSV_Handler exception.
-  * @param  None
-  * @retval None
-  */
-void PendSV_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles SysTick Handler.
-  * @param  None
-  * @retval None
-  */
-void SysTick_Handler(void)
-{
-}
-
-/******************************************************************************/
-/*            STM32F10x Peripherals Interrupt Handlers                        */
-/******************************************************************************/
-
-/**
-  * @brief  This function handles ADC1 and ADC2 global interrupts requests.
-  * @param  None
-  * @retval None
-  */
-#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
-void ADC1_IRQHandler(void)
-#else
-void ADC1_2_IRQHandler(void)
-#endif
-{
-  /* Set PC.06 pin */
-  GPIO_WriteBit(GPIOC, GPIO_Pin_6, Bit_SET);
-  /* Get injected channel11 converted value */
-  ADC_InjectedConvertedValueTab[Index++] = ADC_GetInjectedConversionValue(ADC1, ADC_InjectedChannel_1);
-  /* Clear ADC1 JEOC pending interrupt bit */
-  ADC_ClearITPendingBit(ADC1, ADC_IT_JEOC);
-  /* Reset PC.06 pin */
-  GPIO_WriteBit(GPIOC, GPIO_Pin_6, Bit_RESET);
-}
-
-/******************************************************************************/
-/*                 STM32F10x Peripherals Interrupt Handlers                   */
-/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
-/*  available peripheral interrupt handler's name please refer to the startup */
-/*  file (startup_stm32f10x_xx.s).                                            */
-/******************************************************************************/
-
-/**
-  * @brief  This function handles PPP interrupt request.
-  * @param  None
-  * @retval None
-  */
-/*void PPP_IRQHandler(void)
-{
-}*/
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/TIMTrigger_AutoInjection/stm32f10x_it.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/TIMTrigger_AutoInjection/stm32f10x_it.h
deleted file mode 100644
index 90aa163..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/TIMTrigger_AutoInjection/stm32f10x_it.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    ADC/TIMTrigger_AutoInjection/stm32f10x_it.h 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   This file contains the headers of the interrupt handlers.
-  ******************************************************************************
-  * @attention
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
-  ******************************************************************************
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_IT_H
-#define __STM32F10x_IT_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-void NMI_Handler(void);
-void HardFault_Handler(void);
-void MemManage_Handler(void);
-void BusFault_Handler(void);
-void UsageFault_Handler(void);
-void SVC_Handler(void);
-void DebugMon_Handler(void);
-void PendSV_Handler(void);
-void SysTick_Handler(void);
-#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL)
-void ADC1_IRQHandler(void);
-#else
-void ADC1_2_IRQHandler(void);
-#endif
-					 
-#endif /* __STM32F10x_IT_H */
-
-/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/