o Moving tinyprintf and stm libraries under thirdparty.

1 files changed, 0 insertions, 99 deletions

diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/readme.txt
deleted file mode 100644
index 90fd74a..0000000
--- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/readme.txt
+++ /dev/null
@@ -1,99 +0,0 @@
-/**
-  @page DAC_OneChannelDMA_Escalator DAC one channel DMA escalator example
-  
-  @verbatim
-  ******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
-  * @file    DAC/OneChannelDMA_Escalator/readme.txt 
-  * @author  MCD Application Team
-  * @version V3.5.0
-  * @date    08-April-2011
-  * @brief   Description of the DAC one channel DMA escalator example.
-  ******************************************************************************
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  ******************************************************************************
-   @endverbatim
-
-@par Example Description 
-
-This example describes how to use one DAC channel mode with DMA to generate an
-escalator signal on DAC channel1 output.
-
-DAC channel1 conversion is configured to be triggered by TIM6 TRGO triggers and
-without noise/triangle wave generation. 8bit right data alignment is selected
-since we choose to access DAC_DHR8R1 register.
-DMA2 channel3 is configured to transfer continuously, byte by byte, a 6-byte
-buffer to the DAC1 register DAC_DHR8R1.
-
-The transferred 6bytes buffer is made to have an escalator signal on DAC channel1
-output. DAC channel1 is then enabled. Once TIM6 is enabled, each TIM6 TRGO update
-event generate a DMA request which transfer data  to the DAC1 register and DAC
-conversion is started. The escalator signal can be visualized by connecting PA.04
-pin to an oscilloscope.
-
-@par Directory contents 
-
-  - DAC/OneChannelDMA_Escalator/stm32f10x_conf.h     Library Configuration file
-  - DAC/OneChannelDMA_Escalator/stm32f10x_it.c       Interrupt handlers
-  - DAC/OneChannelDMA_Escalator/stm32f10x_it.h       Header for stm32f10x_it.c
-  - DAC/OneChannelDMA_Escalator/main.c               Main program
-  - DAC/OneChannelDMA_Escalator/system_stm32f10x.c   STM32F10x system source file
-  
-@par Hardware and Software environment 
-
-  - This example runs on STM32F10x Connectivity line, High-Density, XL-Density,
-    High-Density Value line, Medium-Density Value line and Low-Density Value 
-    line Devices.
-  
-  - This example has been tested with STMicroelectronics STM32100B-EVAL 
-    (Medium-Density Value line),STM32100E-EVAL (High-Density Value line),
-     STM3210C-EVAL (Connectivity line) and STM3210E-EVAL (High-Density and 
-     XL-Density) evaluation boards and can be easily tailored to any other 
-     supported device and development board.   
-
-  - STM32100B-EVAL Set-up 
-    - Connect PA.04 pin to an oscilloscope 
-    @note Make shure that jumper JP2 is open.
-    
-  - STM3210C-EVAL Set-up 
-    - Connect PA.04 pin to an oscilloscope
-    @note Make shure that jumper JP15 is open.
-        
-  - STM3210E-EVAL Set-up 
-    - Connect PA.04 pin to an oscilloscope
-	
-  - STM32100E-EVAL Set-up 
-    - Connect PA.04 pin to an oscilloscope
-    
-@par How to use it ? 
-
-In order to make the program work, you must do the following :
- - Copy all source files from this example folder to the template folder under
-   Project\STM32F10x_StdPeriph_Template
- - Open your preferred toolchain 
- - Rebuild all files and load your image into target memory
- - Run the example 
-
-@note
- - Low-density Value line devices are STM32F100xx microcontrollers where the 
-   Flash memory density ranges between 16 and 32 Kbytes.
- - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
-   microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
- - Medium-density Value line devices are STM32F100xx microcontrollers where
-   the Flash memory density ranges between 64 and 128 Kbytes.  
- - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
-   microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
- - High-density Value line devices are STM32F100xx microcontrollers where
-   the Flash memory density ranges between 256 and 512 Kbytes.
- - High-density devices are STM32F101xx and STM32F103xx microcontrollers where
-   the Flash memory density ranges between 256 and 512 Kbytes.
- - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
-   the Flash memory density ranges between 512 and 1024 Kbytes.
- - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
-    
- * <h3><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h3>
- */